3942 GI/2017
(1)
jftLVªh laö Mhö ,yö&33004@99
REGD. NO. D. L.-33004/99
vlk/kj.k
EXTRAORDINARY
Hkkx II—[k.M 3—mi&[k.M (i)
PART II—Section 3—Sub-section (i)
izkf/dkj ls izdkf'kr
PUBLISHED BY AUTHORITY
la- 534]
ubZ fnYyh] eaxyokj] twu 27] 2017@vk"kk<+ 6] 1939
No. 534]
NEW DELHI, TUESDAY, JUNE 27, 2017/ASADHA 6, 1939
सड़क पिरवहन और राजमागर् मंᮢालय
अिधसूचना
नई िदल् ली, 27 जून, 2017
सा.का.िन. 643(अ).—केन् ᮤीय मोटर यान िनयम, 1989 का और संशोधन करने के िलए कितपय ᮧारूप िनयम
मोटरयान अिधिनयम, 1988 (1988 का 59) की धारा 212 की उपधारा (1) की अपेक्षानुसार भारत सरकार के सड़क
पिरवहन और राजमागर् मंᮢालय की अिधसूचना संख्या सा.का.िन. 402(अ), तारीख 21 अᮧैल , 2017 के अधीन भारत के
राजपᮢ, असाधारण, भाग II, खंड 3, उपखंड (i), तारीख 21 अᮧैल, 2017 मᱶ ᮧकािशत िकये गए थे, िजसमᱶ उन सभी
᳞िᲦयᲂ से, िजनके उससे ᮧभािवत होने की सम्भावना थी, उस तारीख से, िजसको भारत के राजपᮢ मᱶ ᮧकािशत रूप मᱶ उᲦ
अिधसूचना की ᮧितयां जनता को उपलब्ध करा दी गई थी, सात िदन की समाि᳙ का पूवर् आक्षेप और सुझाव मांगे गए थे;
और उक् त अिधसूचना की ᮧितयां जनता को 21 अᮧैल, 2017 को उपलब् ध करा दी गई थी ;
उक् त ᮧारूप िनयमᲂ की बाबत जनता से ᮧाप् त आक्षेप और सुझाव जनता से ᮧाप् त नहᱭ िकये गए थे;
अत:, अब कᱶᮤीय सरकार, मोटर यान अिधिनयम, 1988 (1988 का 59) की धारा 110 ᳇ारा ᮧदत् त शिक् तयᲂ का
ᮧयोग करते हुए केन् ᮤीय मोटर यान िनयम, 1989 का और संशोधन करने के िलए िनम् निलिखत िनयम बनाती है, अथार्त् :--
1. (1) इन िनयमᲂ का संिक्षप् त नाम कᱶᮤीय मोटर यान (दसवां संशोधन) िनयम, 2017 है ।
(2) ये राजपᮢ मᱶ उनके ᮧकाशन की तारीख को ᮧवृत् त हᲂगे ।
2. कᱶᮤीय मोटर यान िनयम, 1989 मᱶ, िनयम 118 मᱶ, उप-िनयम (1) के पहले परंतुक के, खंड (iv) का लोप िकया जाएगा।
1. (1) इन िनयमो का संिक्ष᳙ नाम कᱶᮤीय मोटर यान (दसवां संशोधन) िनयम, 2017 है ।
(2) ये राजपᮢ मᱶ इनके अंितम ᮧकाशन की तारीख को ᮧवृᱫ हᲂगे ।
2
THE GAZETTE OF INDIA : EXTRAORDINARY
[PART II—SEC. 3(i)]
2. कᱶᮤीय मोटर वाहन िनयम 1989, मᱶ
(i) 115 (ख) तत्प᳟ात उप-िनयम (1) के रूप मᱶ संख्यांिकत िकया जाएगा और इस ᮧकार पुनः संख्यांिकत के रूप मᱶ,
उपिनयम (1) के प᳟ात िन᳜िलिखत अंतः स्थािपत िकया जाएगा, अथार्त:-
“(2) जब ᮤिवत ᮧाकृितक गैस को ईंधन के रूप मᱶ उपयोग िकया जायेगा तो उप िनयम (1) के तहत सामूिहक उत्सजर्न मानक
जो सीएनजी समिपर्त वाहनᲂ के मूल उपकरण पर लागू हᱹ, वो जीवीडब्ल्यू> 3.5 टी वाले मूल उपकरण िनिमर्ᱫ वाहन पर
लागू हᲂगे।
(3). उत्सजर्न मᱶ लागू होने वाले ᮤवीकृत ᮧाकृितक गैस संरचना उन ईंधन िविनदᱷशᲂ के अनुसार होना चािहए, जैसा िक
यथािस्थित पेᮝोिलयम और ᮧाकृितक गैस मंᮢालय, भारत सरकार या भारतीय मानक ब्यूरो के ᳇ारा, समय-समय पर मोटर
वाहन आवेदन के िलए िविनदᱷशᲂ ᳇ारा अिधसूिचत िकया गया है;:
परन्तु ऐसे समय तक ᮤिवत ᮧाकृितक गैस ईंधन, उपाबंध 4 - एलए मᱶ अपेक्षाᲐ का पालन करते हुए, ᮧकार के
अनुमोदन और उत्पादन की अनुरूपता के ᮧयोजन के िलए िकया जाएगा।
4. मूल उपकरण जी.वी.डब्लू. वाले वाहन समिपर्त िविनिमर्ᱫ ᮤिवत ᮧाकृितक गैस िजसमे जी.वी.डब्लू. > 3.5 टी है, वह
एआईएस -024 और एआईएस -028, समय-समय पर संशोिधत मᱶ, िनधार्िरत सुरक्षा अपेक्षाᲐ को पूरा करेगा। ",
(ii) िनयम 115 के उप-िनयम (1) मᱶ,
पैरा ड. मᱶ, "सीएनजी" अक्षरᲂ के स्थान पर, अक्षर और शब्द "सीएनजी / बायो-सीएनजी / एलएनजी" रखा जाएगा;
पैरा च के, िटप्पण मᱶ, ᮓम संख्या 3 के प᳟ात, िन᳜िलिखत ᮓम संख्या अंतःस्थािपत िकया जाएगा, अथार्त्:-
‘3(क) “एलएनजी समिपर्त वाहन से अिभᮧेत है वह वाहन जो उनके रिजस्ᮝीकरण से पहले, िविनमार्ताᲐ ᳇ारा एलएनजी
संचालन के िलए िनिमर्त िकए जाते हᱹ,”
उपाबंध 9 के स्थान पर, िन᳜िलिखत उपाबंध रखा जाएगा, अथार्त् :-
उपाबंध 9
(िनयम 115 ख की मद ई देखᱶ)
आंतिरक दहन इंजन वाले वाहनᲂ मᱶ सीएनजी/ जैव सीएनजी / एलएनजी ईंधन के उपयोग के िलए सुरक्षा जांच (एआईएस -
028 के अनुसार) और भारतीय गैस िसलᱶडर िनयम (समय-समय पर संशोिधत)
ᮓ. सं.
सीएनजी / जैव
सीएनजी
/
एलएनजी
िकट
घटक
ᮧमाणीकरण / सत्यापन ᮧािधकारी
एआईएस -028 / अन्य
खंड, िनयम, मानक
आिद
1.
सीएनजी / जैव
सीएनजी
/
एलएनजी िसलᱶडर
*
पीईएसओ, नागपुर के मामले मᱶ िवदेशᲂ के िनमार्ण से ᮧमािणत
करने या पृ᳧ांकन करने के िलए
गैस िसलᱶडर िनयम
2004,पीईएसओ ᳇ारा
अनुमोिदत अंतरार᳦्ीय
मानक हᱹ
1.1
वाहन पर िसलᱶडर
का
िनधार्रण
िफटमᱶट
एआईएस -028 के अनुसार, सत्यािपत करने के िलए परीक्षण
अिभकरण
एआईएस - 028 की
धारा 2.3, 2.5 और
2.6
¹Hkkx IIμ[k.M 3(i)º
Hkkjr dk jkti=k % vlk/kj.k
3
2.
सीएनजी
/
एलएनजी
(बंद
वाल्व)
िसलᱶडर
वाल्व
पीईएसओ, नागपुर को िवदेशो से ᮧमािणत करने या पृ᳧ांकन करने
के िलए
(सीएनजी वाल्व्स के
िलए) पीईएसओ ᳇ारा
अनुमोिदत गैस िसलᱶडर
िनयम
2004
या
अंतरार᳦्ीय मानक
3.
िनयामक
(सीएनजी) /
िविनयिमत
और
वाष्पीकरण / ताप
एक्सचᱶजर
(एलएनजी) *
आईएस 15713 या आईएसओ -15500 के अनुसार, परीक्षण
अिभकरण ᳇ारा घटक का परीक्षण । वैकिल्पक रूप से, परीक्षण
अिभकरण, ᮧमािणत परीक्षण ᮧयोगशाला ᮧत्याियत ᳇ारा जारी
मानक के अनुसार, परीक्षण ᮧमाण पᮢ या िरपोटर् की पुि᳥ को
ᮧमािणत करने के िलए।
एलएनजी िनयामक और वाष्पीकरणकतार्/ गमᱮ एक्सचᱶजर ईसीई
आर110 या समतुल्य मानक की अपेक्षाᲐ को पूरा करेगा
आईएस: 15713 या
आईएसओ -15500
ईसीई
आर110
या
समतुल्य मानक
4
गैस एयर िमक्सर
आईएस 15713 या आईएसओ -15500 के अनुसार, परीक्षण
अिभकरण ᳇ारा घटक का परीक्षण । वैकिल्पक रूप से, परीक्षण
अिभकरण, ᮧमािणत परीक्षण ᮧयोगशाला ᳇ारा जारी मानक के
अनुसार, परीक्षण ᮧमाण पᮢ या िरपोटर् की पुि᳥ को ᮧमािणत
करने के िलए।
आई एस: 15714 या
आईएसओ -15500
5.
गैस इंजेक्टर
आईएस -15500 के अनुसार, परीक्षण अिभकरण ᳇ारा घटक का
परीक्षण । वैकिल्पक रूप से, परीक्षण अिभकरण, ᮧमािणत परीक्षण
ᮧयोगशाला ᮧत्याियत ᳇ारा जारी मानक के अनुसार, परीक्षण
ᮧमाण पᮢ या िरपोटर् की पुि᳥ को ᮧमािणत करने के िलए।
आईएसओ -15500
6
पेᮝोल सोलनॉइड
वाल्व*
परीक्षण अिभकरण ᳇ारा आई एस: 15717 के अनुसार घटक का
परीक्षण करना। वैकिल्पक रूप से, परीक्षण अिभकरण को ᮧमािणत
परीक्षण ᮧयोगशाला ᳇ारा ᮧत्याियत जारी मानक के अनुसार
परीक्षण ᮧमाण पᮢ या िरपोटर् की पुि᳥ करने के िलए
आई एस: 15717
6.1
गैस
सोलेनोइड
वाल्व*
आईएस के अनुसार घटक का परीक्षण: 15712 या परीक्षण
अिभकरण ᳇ारा आईएसओ -15500। वैकिल्पक रूप से, परीक्षण
अिभकरण को ᮧमािणत परीक्षण ᮧयोगशाला ᳇ारा ᮧत्याियत जारी
मानक के अनुसार परीक्षण ᮧमाण पᮢ या िरपोटर् की पुि᳥ करने के
िलए ।
एलएनजी ᮧणाली का स्वचािलत वाल्व ईसीईआर110 या
समतुल्य मानक की अपेक्षाᲐ को पूरा करेगा
आईएस:
15712या
आईएसओ -15500
एलएनजी ᮧणाली का
स्वचािलत
वाल्व
ईसीईआर110
या
समतुल्य मानक की
अपेक्षाᲐ
को
पूरा
करेगा
7.
सीएनजी
/
एलएनजी
ᮧत्यारोपण
के
िलए
कनेक्शन
भरना (एनजेडएस
एआईएस -028 के अनुसार, परीक्षण अिभकरण ᳇ारा वाहन पर
संस्थापन की जानी चािहए।
एआईएस
-028
के
2.2.2, 2.2.3, 2.2.4,
2.2.5 और 2.2.6 के
खंड
4
THE GAZETTE OF INDIA : EXTRAORDINARY
[PART II—SEC. 3(i)]
और
एनजीवी-1
ᮧकार)
8.
संवातन
सत्यािपत करने के िलए परीक्षण अिभकरण
एआईएस -028 के खंड
2.4.2
9.
नाली का परीक्षण* घटक का परीक्षण या ᮧमाण पᮢ का सत्यापन या आई एस:
15715 के अनुसार, परीक्षण अिभकरण ᳇ारा परीक्षण िरपोटर्।
आई एस: 15715
10.
सीएनजी / जैव सीएनजी / एलएनजी ईंधन लाइन
10.1
उᲬ दबाव 100 केपीएसे अिधक
10.1.1 2.15 एमपीए से अिधक
कठोर पाइप
घटक का परीक्षण या ᮧमाण पᮢ का सत्यापन या आई एस:
15716 के अनुसार, परीक्षण अिभकरण ᳇ारा परीक्षण िरपोटर्।
एलएनजी कठोर पाइपलाइन ईसीईआर 110 या समतुल्य मानक
की अपेक्षाᲐ को पूरा करेगा।
आईएस:15716
इसीएसआर 110 या
समतुल्य मानक
नमनीय नली
घटक का परीक्षण या ᮧमाण पᮢ का सत्यापन या आई एस:
15718 के अनुसार, परीक्षण अिभकरण ᳇ारा परीक्षण िरपोटर्।
एलएनजी पाइपलाइन ईसीई आर110 या समतुल्य मानक की
अपेक्षाᲐ को पूरा करेगा।
आई एस: 15718
ईसीई
आर110
या
समतुल्य मानक
10.1.2 2.15 एमपीए तक
दबाव
घटक का परीक्षण या ᮧमाणपᮢ का सत्यापन या आई एस:
15722 के अनुसार, परीक्षण अिभकरण ᳇ारा परीक्षण िरपोटर्।
ईसीई आर 110 या समतुल्य मानक एलएनजी पाइपलाइन ईसीई
आर110 या समतुल्य मानक की अपेक्षाᲐ को पूरा करेगा।
आई
एस:15722
संशोधन के साथ
ईसीई
आर110
या
समतुल्य मानक
10.2
जोड़ और संपकर्
परीक्षण अिभकरण ᳇ारा परीक्षण
एलएनजी जोड़ और संपकर् को ईसीई आर110 या समतुल्य मानक
की अपेक्षाᲐ को पूरा करेगा।
एआई एस-028 के खंड
3.2.1(ख)
को ईसीई आर 110 या
समतुल्य मानक
11
िडब्बे
या
उप
िडब्बे
घटक का परीक्षण, परीक्षण अिभकरण ᳇ारा ᮧमाण पᮢ का
सत्यापन या परीक्षण िरपोटर्, आईएस 15720 के अनुसार है:
आई एस: 15720
12
िविनर्िद᳥
एलएनजी घटक
(क)िन᳜ िविनर्िद᳥ घटक, जैसा की लागू है, ईसीईआर110 या
अन्य समतुल्य मानक की अपेक्षाᲐ को पूरा करेगा
ईसीईआर
110
या
समतुल्य मानक
(ख)इलेक्ᮝॉिनक िनयंᮢण इकाई, दबाव और / या तापमान सᱶसर
(यिद एलएनजी िसलᱶडर का भाग नहᱭ है)
13.
सीएनजी / जैव
सीएनजी
/
एलएनजी ᮧणाली
की संस्थापन के
िलए सुरक्षा जांच
एआईएस -028 के अनुसार, परीक्षण अिभकरण ᳇ारा िकए जाने
वाले सुरक्षा जांच
एआईएस -028 की
सुसंगत के खंडो मᱶ
¹Hkkx IIμ[k.M 3(i)º
Hkkjr dk jkti=k % vlk/kj.k
5
*मूल देश की मान्यता ᮧत्याियत ᮧा᳙ परीक्षण अिभकरण ᳇ारा जारी ᮧमाण पᮢ या अंतररा᳦ीय स्तर पर मान्यता ᮧा᳙
परीक्षण ᮧयोगशाला ᳇ारा जारी एक िरपोटर् भी स्वीकार िकया जा सकता है।
िटप्पण 1 - केवल मानकᲂ, समय-समय पर संशोिधत, जैसा िक ऊपर िनिदष् ट है, अनुपालन के िलए भेजा जाएगा।
िटप्पण 2 - एलएएनजी ᮧणाली वाष्पीकरण / ऊष्मा एक्सचᱶजर को काम करने वाले घटको को सीएनजी घटकᲂ के रूप मᱶ
माना जाएगा।
िटप्पण 3 - परीक्षण अिभकरण को वािणिज्यक उपलब्ध एलएनजी ईंधन के साथ लागू होने वाले सीएमवीआर परीक्षण करना
है, करने के िलए ।"
(iv) उपाबंध 4-ठ के प᳟ात, िन᳜िलिखत उपाबंध रखा जाएगा, अथार्त्:-
“उपाबंध 4-ठक”
(िनयम 115 ख़ के उप-िनयम (3) के परन्तुक को देखᱶ)
संदभर् एलएनजी ईंधन की तकनीकी िविनदᱷश
ᮓमांक
घटक
सांᮤ
1
मीथेन%
87.33-99.71
2.
ईथेन%
0.09-10.26
3.
ᮧोपेन%
0.03-3.56
4.
ब्यूटेन%
0.148
5.
सल्फर
<10 पीपीएम
6.
एलएनजी घनत्व िकलोᮕाम / एम 3
421.39-467.35
7.
िवस्तार अनुपात एम 3 (एन) / एम 3 िलक
558-600.0
8
गैस जीसीवी एमजे / एम 3 (एन)
39.91-46.24
9.
वोबी सूचकांक एमजे / एम 3 (एन)
53.51-56.77”.
[फा. सं. आरटी-11028/15/2016-एमवीएल]
अभय दामले, संयुᲦ सिचव
िटप्पण : मूल िनयम, भारत के राजपᮢ, असाधारण, भाग II, खंड 3, उपखंड (i) मᱶ अिधसूचना सं. सा.का.िन. 590(अ),
तारीख 2 जून, 1989 को ᮧकािशत िकए गए थे और अंितम बार अिधसूचना सं.सा.का.िन. 485(अ), तारीख
19.05.2017 को संशोिधत िकए गए ।
MINISTRY OF ROAD TRANSPORT AND HIGHWAYS
NOTIFICATION
New Delhi, the 27th June, 2017
G.S.R. 643(E).—Whereas, the draft of certain rules further to amend the Central Motor Vehicles Rules, 1989,
was published as required by sub-section (1) of section 212 of the Motor Vehicles Act, 1988 (59 of 1988) vide
notifications of Government of India in the Ministry of Road Transport and Highways number G.S.R. 402(E), dated
the 21st April, 2017, in the Gazette of India, Extraordinary, Part II, Section 3, Sub-section (i), inviting objections and
suggestions from all persons likely to be affected therby, within a period of seven days from the date on which copies of
the Gazette containing the said notification were made available to public;
6
THE GAZETTE OF INDIA : EXTRAORDINARY
[PART II—SEC. 3(i)]
AND whereas, copies of the said Gazette notification were made available to the public on the 21st April, 2017;
And whereas, no objections and suggestions were received from the public in respect of the said draft rules;
Now, therefore, in exercise of the powers conferred by section 110 of the Motor Vehicles Act, 1988 (59 of
1988), the Central Government hereby makes the following rules further to amend the Central Motor Vehicles Rules,
1989, namely: -
1. Short title and commencement.—(1) These rules may be called the Central Motor Vehicles (10th Amendment)
Rules, 2017.
(2) They shall come into force on the date of their publication in the Official Gazette.
2. In the Central Motor Vehicle Rules, 1989, -
(i) rule 115B shall be renumbered as sub-rule (1) thereof and after sub-rule (1) as so renumbered, the
following shall be inserted, namely: -
“(2)The mass emission standards applicable to Original Equipment CNG Dedicated Vehicles under
sub-rule (1) shall be applicable to Original Equipment manufactured vehicle having GVW ≥ 3.5 T,
when Liquified Natural Gas is used as fuel.
(3)The Liquified Natural Gas composition used for carrying out emission shall meet the fuel
specification as notified by the Government of India in the Ministry of Petroleum and Natural Gas, or
Bureau of Indian Standard, as the case may be, for automotive application from time to time:
Provided that till such time the Liqiufied Natural Gas fuel complying to the requirements as
provided in Annexure IV- LA shall be used for the purpose of type approval and conformity of
production.
(4) The Original Equipment manufactued Liqiufied Natural Gas dedicated vehicle having GVW ≥3.5
T shall meet the safety requirements as laid down in AIS-024 and AIS- 028 as amended from time to
time.”;
(ii) in rule 115B, in sub-rule (1),-
(a) in para E, for the letters “CNG”, the letters and word “CNG/bio-CNG/ LNG” shall be substituted;
(b) in para F, in the Note, after serial number 3, the following serial number shall be inserted, namely: -
‘3(a) “O.E. LNG Dedicated Vehicle” means the vehicles which are manufactured for LNG
operation by the vehicle manufacturers prior to their first registration;’;
(iii) for Annexure IX, the following Annexure shall be substituted, namely: -
“Annexure IX
(see para E of rule 115B)
SAFETY CHECKS FOR USE OF CNG / BIO-CNG/LNG FUELS IN INTERNAL COMBUSTION ENGINED
VEHICLES (AS PER AIS-028) and
INDIAN GAS CYLINDER RULES
(as amended from time to time)
Sr. No. CNG / BIO-
CNG/LNG Kit
Component
Certifying /Verifying Authority
Clause of AIS-028 / Other
Rules and Standards
1
CNG
/
BIO-
CNG/LNG
Cylinder*
PESO, Nagpur to certify or endorse in case of
foreign make
Gas cylinder rules 2004 or
International
standards
as
endorsed by PESO
1.1
Fitment of cylinder
on vehicle
Test agency to verify as per AIS-028
Clause no. 2.3, 2.5 and 2.6 of
AIS-028
2
CNG/LNG
(Shut
off valve) Cylinder
valves*
PESO, Nagpur to certify or endorse in case of
foreign make
IS: 3224(for CNG valves) or
Gas cylinder rules 2004 or
International
standards
as
endorsed by PESO
¹Hkkx IIμ[k.M 3(i)º
Hkkjr dk jkti=k % vlk/kj.k
7
3
Regulator (CNG) /
Regulator
and
Vaporiser/heat
exchanger (LNG)*
Testing of the component as per IS: 15713or ISO-
15500 by test agency. Alternatively, test agency to
verify the test certificate or report conforming to the
above standard issued by accredited testing
laboratory.
LNG regulator and Vaporiser/heat exchanger shall
meet requirements of ECE R110 or equivalent
standard
IS: 15713 or ISO-15500
ECE
R110
or
equivalent
standard
4
Gas-Air Mixer*
Testing of the component as per IS :15714 or
ISO-15500 by test agency. Alternatively, test
agency to verify the test certificate or report
conforming to the above standard issued by
accredited testing laboratory.
IS: 15714 or ISO-15500
5
Gas Injector*
Testing of the component as per ISO-15500 by test
agency. Alternatively, test agency to verify the test
certificate or report conforming to the above
standard issued by accredited testing laboratory.
ISO-15500
6
Petrol
Solenoid
Valve*
Testing of the component as per IS: 15717 by test
agency. Alternatively, test agency to verify the test
certificate or report conforming to the above
standard issued by accredited testing laboratory.
IS: 15717
6.1
Gas
Solenoid
Valve*
Testing of the component as per IS: 15712 or ISO-
15500 by test agency. Alternatively, test agency to
verify the test certificate or report conforming to the
above standard issued by accredited testing
laboratory.
Automatic valve of LNG System shall meet
requirements of ECE R110 or equivalent standard
IS: 15712 or ISO-15500
Automatic Valve for LNG
System
:
ECE
R110
or
equivalent standard
7
Filling Connection
(NZS & NGV-1
type) for CNG /
LNG receptacle
Installation on vehicle to be checked by test agency
as per AIS-028
Clauses 2.2.2, 2.2.3, 2.2.4, 2.2.5
and 2.2.6 of AIS-028
8
Ventilation
Test agency to verify.
Clause 2.4.2 of AIS-028
9
Testing
of
Conduit*
Testing of the component or verification of
certificate or test report as per IS: 15715by test
agency.
IS: 15715
10
CNG / BIO-CNG/LNG fuel line
10.1
High pressure — exceeding 100 kPa*
10.1.1
Exceeding 2.15 MPa
- Rigid pipe
Testing of the component or verification of
certificate or test report as per IS: 15716 by test
agency.
LNG rigid pipeline shall meet requirements of ECE
R110 or equivalent standard
IS: 15716
ECE R 110 or equivalent
standard
- Flexible hose
Testing of the component or verification of
certificate or test report as per IS 15718 by test
agency.
LNG pipeline shall meet requirements of ECE
R110 or equivalent standard
IS 15718
ECE
R110
or
equivalent
standard
10.1.2
Pressure upto 2.15
Mpa
Testing of the component or verification of
certificate or test report as per IS: 15722 by test
agency.
LNG pipeline shall meet requirements of ECE
R110 or equivalent standard
IS: 15722 with amendments
ECE
R110
or
equivalent
standard
8
THE GAZETTE OF INDIA : EXTRAORDINARY
[PART II—SEC. 3(i)]
10.2
Joints
and
connections*
Testing by test agency.
LNG joints & connection shall meet requirements of
ECE R110 or equivalent standard.
Clause 3.1.4.1, 3.2.1 (b) of
AIS-028
ECE
R110
or
equivalent
standard
11
Compartment
or
Sub-compartment*
Testing of the component or verification of
certificate or test report as per IS: 15720by test
agency.
IS: 15720
12
Specific
LNG
components
(a) Following specific components, as applicable
shall meet requirements of ECE R 110 or other
International standards
(b) Electronic Control Unit, Pressure and/or
temperature sensor (if not part of LNG
cylinder)
ECE R 110 or equivalent
standard
13
Safety check for
installation of CNG
/
BIO-CNG/LNG
system
Safety checks to be carried out by test agency as per
AIS-028.
Relevant clauses of AIS-028
* Certificate issued by accredited testing agency of the country of origin or a report issued by internationally accredited
test laboratory may also be accepted.
Note 1 -Only the standards, as amended from time to time, as mentioned above, shall be referred for compliance.
Note 2 -LNG system Components downstream of Vaporiser or heat exchanger shall be considered as CNG components.
Note 3 - Test agency to conduct applicable CMVR test as applicable with commercial available LNG fuel.”;
(iv) after Annexure IV- L, the following Annexure shall be inserted, namely: -
“Annexure IV-LA
(see the proviso to sub-rule (3) of rule 115B)
TECHNICAL SPECIFICATIONS OF THE REFERENCE LNG FUEL
Sr. No
Component
Concentration
1.
Methane %
87.33-99.71
2.
Ethane %
0.09-10.26
3.
Propane %
0.03-3.56
4.
Butane + %
0-1.48
5.
Sulphur
<10 ppm
6.
LNG Density kg/m3
421.39-467.35
7.
Expansion ratio m3(n)/m3 liq
558-600.0
8.
Gas GCV MJ/m3(n)
39.91-46.24
9.
Wobbe Index MJ/m3(n)
53.51-56.77”.
[F. No. RT- 11028/15/2016-MVL]
ABHAY DAMLE, Jt. Secy.
Note : The principal rules were published in the Gazette of India, Extraordinary, Part II, Section 3, Sub-section (i) vide
notification number G.S.R. 590(E), dated the 2nd June, 1989 and last amended vide notification number
G.S.R 485(E), dated 19.05.2017.
Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064
and Published by the Controller of Publications, Delhi-110054.
ALOK KUMAR
Digitally signed by ALOK KUMAR
Date: 2017.07.01 09:14:42 +05'30'