7658 GI/2023

(1)

रजिस्ट्री सं. डी.एल.- 33004/99

REGD. No. D. L.-33004/99

xxxGIDHxxx

xxxGIDExxx

असाधारण

EXTRAORDINARY

भाग III—खण् ड 4

PART III—Section 4

प्राजधकार से प्रकाजित

PUBLISHED BY AUTHORITY

संयुक्त जिद्युत जिजियामक आयोग

(केंद्र िाजसत प्रदेि िम्मू और कश्मीर ि केंद्र िाजसत प्रदेि लद् दाख)

अधिसूचना

िम्मू, 29 ििम् बर, 2023

क्रमाांक जेईआरसी-जेकेएल/रेग/2023/18.—जिद्युत अजधजियम 2003 (2003 का अजधजियम संख्या 36) (इसके बाद

"अजधजियम" के रूप में संदर्भित) की धारा-14 के साथ पठित धारा 181 (1) और 181 (2) द्वारा प्रदत्त िजक्तयों का प्रयोग करते हुए,

और अजधजियम के संदभि में सरकार द्वारा िारी अधीिस्ट्थ कािूि, जियम, िैधाजिक आदेि, संकल्प, स्ट्पष्टीकरण सज त इसे सषम म करिे

िाली सभी िजक्तयां, संयुक्त जिद्युत जिजियामक आयोग केंद्र िाजसत प्रदेि िम्मू और कश्मीर ि केंद्र िाजसत प्रदेि लद्दाख लाइसेंसधाठरयों

द्वारा सेिा की गुणित्ता, जिरंतरता और जिश्वसिीयता के संबंध में मािकों को लागू करिे के जलए जिम्नजलजखत जिजियम बिाता ै।

अध्याय 1: सामान् य

1.1

सांधिप्त शीर्षक, प्रारांभ, धिस्तार और व्याख्या

1)

इन धिधनयमों को “संयुक्त जिद्युत जिजियामक आयोग केंद्र शाधसत प्रदेश जम्मू और कश्मीर ि केंद्र शाधसत प्रदेश लद्दाख (धितरण

कोड) धिधनयम, 2023” कहा जाएगा।

2)

ये धिधनयम आधिकाररक राजपत्र में प्रकाशन की जतजथ से लागू होंगे।

3)

ये धिधनयम केंद्र शाधसत प्रदेश जम्मू और कश्मीर ि केंद्र शाधसत प्रदेश लद् दाख तक धिस्ताररत होंगे।

सं. 827]

िई ददल्ली, सोमिार, ददसम्बर 11, 2023/अग्र ायण 20, 1945

No. 827]

NEW DELHI, MONDAY, DECEMBER 11, 2023/AGRAHAYANA 20, 1945

सी.जी.-जे.के.-अ.-14122023-250661

CG-JK-E-14122023-250661

2

THE GAZETTE OF INDIA : EXTRAORDINARY

[PART III—SEC.4]

1.2

पररभार्ाएां

1.2.1 इन धिधनयमों में, धनम्नधलधखत शब्दों और अधभव्यधियों का, जब तक कक धिर्य िस्तु या सांदभष अन्यथा आिश्यक न हो या

असांगत न हो, धनम्नधलधखत अथष होंगे:

क) "अधिधनयम" का अथष धिद्युत अधिधनयम, 2003 (2003 का अधिधनयम सांख्या 36) है;

ख) "अनुबांि" का अथष धितरण लाइसेंसिारी और उपयोगकताष द्वारा ककया गया समझौता है;

ग) "उपकरण" का अथि जिद्युत उपकरण ै और इसमें जिद्युत जितरण प्रणाली से िुडी सभी मिीिें, दिट ंग, सामाि और उपकरण

िाजमल ैं;

घ) "सीबीआईपी" का अथष है केंद्रीय ससांचाई और धिद्युत बोडष;

ङ) "सीईए" का अथष केंद्रीय धिद्युत प्राधिकरण है;

च) “सर्कषट" का अथष है धिद्युत ऊजाष सांप्रेधर्त करने और एक प्रणाली या धसस्टम की एक शाखा बनाने के उद्देश्य से कांडक्टरों की

व्यिस्था;

छ) "आयोग" का अथष सांयुि धिद्युत धिधनयामक आयोग केंद्र शाधसत प्रदेश जम्मू और कश्मीर ि केंद्र शाधसत प्रदेश लद्दाख है;

ि) "कांडक्टर" का अथष है कोई तार, केबल, बार, ट्यूब, रेल या प्लेट धजसका उपयोग ऊजाष के सांचालन के धलए ककया जाता है और

प्रणाली से धिद्युत रूप से जुडा होता है;

झ) “कुल भार" का अथष उपभोिा के पररसर में पोटेबल उपकरण सधहत लाइसेंसिारी की धबजली आपूर्तष प्रणाली से धिधिित तार

से जुडे और जुडे सभी ऊजाष खपत िाले उपकरणों के धनमाषता की रेटटांग का योग है। इसमें अधिशमन उद्देश्यों के धलए धिशेर्

रूप से स्थाधपत अधतररि प्लग, सॉकेट, लोड का भार शाधमल नहीं होगा। पानी और कमरे को गमष करने या कमरे को ठांडा

करने िाले उपकरण का भार, जो भी अधिक हो, मौजूदा मौसम के अनुसार ध्यान में रखा जाएगा (ठांडा करने के उपयोग के

धलए 1 अप्रैल से 30 धसतांबर और गमष के उपयोग के धलए 1 अक्टूबर से 31 माचष तक)। कनेक्टेड लोड की पररभार्ा का

उपयोग केिल प्रत्यि चोरी या ऊजाष की बेईमानी से धनकासी या ऊजाष के अनधिकृत उपयोग के मामले में मूलयाांकन के उद्देश्य

से दकया िािा चाज ए;

ञ) "जियंत्रण व्यजक्त" का अथि ै सीमा पार सुरषम ा के जलए तकिीकी षम मता और जिम्मेदारी रखिे िाला व्यजक्त;

) "डीसीआर" का अथष है धितरण कोड समीिा;

ि) "डीसीआरपी" का अथष है धितरण कोड समीिा पैनल;

ड) "एम्बेडेड" का अथष है ककसी अांतर-राज्यीय धिद्युत प्रणाली से सीिा धिद्युत कनेक्शन होना;

ढ) "अधतररि उच्च तनाि (ईएचटी)" का अथष है सामान्य पररधस्थधतयों में 33000 िोलट और उससे अधिक का िोलटेज, जो

भारतीय धिद्युत धिधनयम 1956 के तहत अनुमत प्रधतशत धभन्नता के अिीन है;

ण) "जीएसएस" का अथष धिड सब-स्टेशन है;

त) "उच्च तनाि (एचटी) या उच्च िोलटेज (एचिी)" का अथष है सामान्य पररधस्थधतयों में 650 िोलट और 33000 िोलट के बीच

िोलटेज, जो भारतीय धिद्युत धिधनयम 1956 के तहत अनुमत प्रधतशत धभन्नता के अिीन है;

थ) "भारतीय मानक (आईएस)" का अथष उन मानकों और धिधशष्टताओं से है जो भारतीय मानक ब्यूरो द्वारा अनुमोकदत हैं;

द) "इांटरफेस पॉइांट/कनेक्शन पॉइांट/बाउांड्री पॉइांट" का अथष िह सबांदु है धजस पर उपयोगकताष की धिद्युत प्रणाली लाइसेंसिारी की

धितरण प्रणाली से जुडी होती है;

[भागIII—खण् ड 4]

भारत का रािपत्र : असाधारण

3

ध) “कम तिाि (एल ी) या कम िोल् ेि (एलिी)" मतलब सामान्य पररधस्थधतयों में चरण और तटस्थ के बीच 230 िोलट या

ककन्हीं दो चरणों के बीच 400 िोलट का िोलटेज है, जो धिद्युत धिधनयमों के तहत अनुमत प्रधतशत धभन्नता के अिीन है;

ि) "पािर िैक् र" का अथि सदिय पािर (दकलोिा ) से स्ट्पष्ट पािर (केिीए) का अिुपात ै;

ऩ) "पीटीडब्लयू" का अथष है काम करने का परधमट;

प) "आरईसी" का अथष है िामीण धिद्युतीकरण धनगम;

ि) "पारेषण प्रणाली" का अथि ै एक पािर स्ट् ेिि से एक सब-स्ट् ेिि या दूसरे पािर स्ट् ेिि तक या सब-स्ट् ेििों के बीच या दकसी

बा री इं रकिेक्िि उपकरण से लेकर जितरण प्रणाली, जबिली के पारेषण के संबंध में पारेषण लाइसेंसधारी के स्ट्िाजमत्ि

िाले या उपयोग दकए िािे िाले दकसी भी संयंत्र और उपकरण और मी र के साथ इं रकिेक्िि तक, जबिली के पारेषण के

प्रयोििों के जलए पारेषण लाइसेंसधारी द्वारा स्ट्िाजमत्ि और/या संचाजलत ईएच ी पर अजतठरक्त उच्च िोल् ेि जिद्युत लाइिों से

युक्त प्रणाली, लेदकि इसमें लाइसेंसधारी जितरण प्रणाली का कोई भी ज स्ट्सा िाजमल ि ीं ोगा;

ब) "उपयोगकताष" का अर्थ है धितरण लाइसेंसिारी की धितरण प्रणाली के साथ धिद्युत इांटरफेस रखने िाला या उसका उपयोग

करने िाला कोई भी व्यधि, धजस पर यह कोड लागू होता है। कोई अन्य धितरण लाइसेंसिारी, पारेषण लाइसेंसिारी, और

धितरण प्रणाली से जुडी उत्पादन इकाइयााँ भी इस िब्द में शाधमल हैं;

1.2.2

इस सांधहता में प्रयुि और पररभाधर्त नहीं ककए गए लेककन अधिधनयमों में पररभाधर्त शब्दों और अधभव्यधियों के िही अथष

होंगे जो उन्हें उि अधिधनयमों में कदए गए हैं। य ां उपयोग की गई अजभव्यजक्तयां, लेदकि िो इि जिजियमों या उक्त

अजधजियमों में जििेष रूप से पठरभाजषत ि ीं ैं, लेदकि एक सषम म जिधाजयका द्वारा पाठरत और राज्य में जबिली उद्योग पर

लागू दकसी भी कािूि के त त पठरभाजषत ैं, उिका अथि ऐसे कािूि में ददया गया ोगा। उपरोि के अिीन, यहाां प्रयुि

अधभव्यधियाां, लेककन िो इन धिधनयमों या अधिधनयमों या सिम धििाधयका द्वारा पाररत ककसी भी कानून में धिशेर् रूप से

पररभाधर्त नहीं की गई हैं, उनका िही अथष होगा जो आम तौर पर धबजली उद्योग में कदया जाता है;

1.3

संजषम प्ताषम र

1.3.1 इन धिधनयमों में प्रयुि सांधिप्तािरों को इन धिधनयमों के साथ सांलि सांधिप्तािरों की सूची में अनुबांि 5 के रूप में सूचीबद्ध और

समझाया गया है।

1.4

पररचय

1.4.1 धितरण कोड धबजली की आपूर्तष के तकनीकी पहलुओं से सांबांधित है, धजसका लाइसेंसिाररयों द्वारा सेिा की गुणित्ता, धनरांतरता

और धिश्वसनीयता और धबजली के धितरण के धलए लाइसेंसिारी की धितरण प्रणाली के उपयोग पर प्रभाि पडता है। यह

प्रणाली योजना और सांचालन में धितरण लाइसेंसिारी और उपयोगकताषओं के अधिकारों और दाधयत्िों को धनर्दष्ट करता है।

1.4.2 जितरण कोड जितरण लाइसेंसधारी और लाइसेंसधारी की जितरण प्रणाली से िुडे या िुडिे के इच्छुक उपयोगकतािओं द्वारा

अिुपालि की िािे िाली आिश्यकताओं के संबंध में संपूणि ि ीं ै। धितरण लाइसेंसिारी और सभी उपयोगकताषओं/उपभोिाओं

को लागू प्रासांधगक कानूनों के तहत धिधभन्न कोड, मानकों और धिधनयमों में धनिाषररत आिश्यकताओं का भी पालन करना होगा।

1.5

उद्देश्य

इस जितरण संज ता के मुख्य उद्देश्य ैं-

क) एक कुिल, समजन्ित और दकिायती जितरण प्रणाली के जिकास और रखरखाि को सुजिजित करिा और य देखिा दक

जितरण लाइसेंसधारी और सभी जितरण प्रणाली प्रजतभागी अजधजियम में ददए गए संबंजधत दाजयत्िों का अिुपालि करते ैं,

और

ख) जितरण िे िकि का उपयोग करिे और प्रदाि करिे के जलए जियमों का एक से बिािा-

4

THE GAZETTE OF INDIA : EXTRAORDINARY

[PART III—SEC.4]

(i) लाइसेंसिारी की धितरण प्रणाली और उससे जुडे और िुडिे के इच्छुक उपयोगकतािओं के बीच कामकाजी सांबांिों के

तकनीकी पहलू,

(ii) ककफायती और धिश्वसनीय धबजली धितरण नेटिकष के सांचालन, रखरखाि, धिकास और योजना की सुधििा।

(iii) धितरण लाइसेंसिाररयों और उपयोगकताषओं द्वारा पालन ककए जाने िाले सुरिा और सांरिण पैरामीटर।

1.6

प्रयोज्यता

1.6.1 ये धिधनयम सभी धितरण लाइसेंसिाररयों और धबजली उपभोिाओं पर लागू होंगे।

1.6.2 इन धिधनयमों की व्याख्या और कायाषन्ियन भारतीय धिद्युत धिधनयम, 1956 और इस सांबांि में ककसी भी केंद्रीय धिद्युत

प्राधिकरण धिधनयम के साथ पढे जाने िाले धिद्युत अधिधनयम, 2003 के प्राििानों के अनुसार दकया िािा चाज ए और उनसे

धभन्न नहीं होगा।

1.6.3 ये धिधनयम सभी धितरण प्रणाली प्रधतभाधगयों पर लागू होंगे धजनमें जिम्न शाधमल हैं;

क) माधनत लाइसेंसिाररयों सधहत धितरण लाइसेंसिारी;

ख) धितरण प्रणाली से जुडे ओपन एक्सेस उपभोिा;

ग) अधिधनयम की िारा-14 के परांतुक 8 के अांतगषत आने िाली सांस्थाएाँ;

घ) बेडेड जेनरेटर;

ङ) खुदरा आपूर्तष टैररफ आदेश के तहत पररभाधर्त सभी उपभोिा श्रेधणयाां।

1.7

कायाषन्ियन

1.7.1 धितरण लाइसेंसिारी धितरण कोड के कायाषन्ियन के धलए धजम्मेदार होगा।

1.7.2 इस सांधहता में धनधहत ककसी भी बात को उपभोिाओं/धितरण लाइसेंसिाररयों पर धिद्युत अधिधनयम, 2003 में उधललधखत

प्रासांधगक िाराओं से अधिक या अधिक करठन दाधयत्ि/कतषव्य लगाने के रूप में नहीं समझा जाना चाधहए।

1.7.3 धितरण कोड में धितरण प्रणाली में कदन-प्रधतकदन की तकनीकी धस्थधतयों के प्रबांिन के धलए प्रकक्रयाएां शाधमल हैं, धजसमें

सामान्य और असामान्य दोनों धस्थधतयों के तहत आने िाली सांभाधित पररचालन धस्थधतयों की एक धिस्तृत श्रृांखला को ध्यान में

रखा जाता है। धितरण कोड सभी सांभाधित पररचालन धस्थधतयों का पूिाषनुमान नहीं लगा सकता है। इसधलए उपयोगकताषओं को

यह समझना और स्िीकार करना चाधहए कक धितरण लाइसेंसिारी को, ऐसी अप्रत्याधशत पररधस्थधतयों में, लाइसेंस के तहत

अपने दाधयत्िों का धनिषहन करने के धलए धनणाषयक रूप से और उधचत शीघ्रता से कायष करने की आिश्यकता हो सकती है।

उपयोगकताषओं को ऐसा उधचत सहयोग और सहायता प्रदान करनी होगी धजसकी धितरण लाइसेंसिारी को ऐसी पररधस्थधतयों

में आिश्यकता हो सकती है।

ालााँदक, संबंजधत जितरण लाइसेंसधारी ऐसे सभी मामलों को अिुसमथि के जलए "जितरण कोड समीषम ा पैिल" को

संदर्भित करेगा।

1.8

गोपनीयता

सांयुि राष्ट्रधितरण कोड की शतों के तहत, धितरण लाइसेंसिारी को उपयोगकताषओं से उनके व्यिसाय से सांबांधित जानकारी

प्राप्त होगी। धितरण लाइसेंसिारी, धितरण सांधहता द्वारा अपेधित के अलािा, ऐसे मुखधबर की पूिष धलधखत सहमधत के धबना

ककसी अन्य व्यधि को ऐसी जानकारी का खुलासा नहीं करेगा, जब तक कक केंद्र/राज्य सरकार के धिभागों या ककसी प्राधिकरण

द्वारा आिश्यक न हो।

[भागIII—खण् ड 4]

भारत का रािपत्र : असाधारण

5

1.9

अनुपालन

जितरण लाइसेंसधारी द्वारा जितरण संज ता के दकसी भी प्रािधाि का अिुपालि ि करिे पर अजधजियमों या लाइसेंस में ददए

गए अिुसार पठरणाम भुगतिे ोंगे। हालााँकक, धितरण कोड का अनुपालन न करने की धस्थधत में, धितरण लाइसेंसिारी धितरण

कोड के अनुपालन के धलए एक कायष योजना तैयार करेगा और आयोग को प्रस्तुत करेगा। यकद उपलब्ि सांसािनों और मौजूदा

पररधस्थधतयों को देखते हुए यह पाया जाता है कक ऐसी अिधि के धलए अनुपालन सांभि नहीं है, तो आयोग लाइसेंसिारी को

ककसी धिशेर् अिधि के धलए ककसी भी प्राििान के अनुपालन से छूट दे सकता है।

1.10 धििादों को धनपटाने की प्रकक्रयाएाँ

दकसी भी उपयोगकताि और जितरण लाइसेंसधारी के बीच जितरण कोड में प्रदाि दकए गए दकसी भी जियम की व्याख्या के

संबंध में दकसी भी जििाद की जस्ट्थजत में, मामला आयोग को भेिा िाएगा, और आयोग का जिणिय अंजतम और दोिों पषम ों पर

बाध्यकारी ोगा।

अध्याय - 2 धितरण कोड का प्रबांिन

2.1

उद्देश्य

यह अध्याय धितरण कोड को प्रबांधित करने की धिधि, आिश्यक ककसी भी पररितषन/सांशोिन को आगे बढाने और इस सांबांि में

धितरण लाइसेंसिाररयों और उपयोगकताषओं/उपभोिाओं की धजम्मेदाररयों को पररभाधर्त करता है। य अिुभाग न्यायसंगत

तरीके से सभी पषम ों के जिचारों को ध्याि में रखते हुए संिोधि की सुजिधा प्रदाि करता ै।

2.2

धितरण कोड समीिा पैनल

2.2.1 आयोग द्वारा धितरण कोड समीिा पैनल (डीसीआरपी) नामक एक स्थायी धनकाय का गठन दकया िािा चाज ए धजसमें धितरण

लाइसेंसिारी के प्रधतधनधियों के साथ-साथ धितरण कोड के प्राििानों के अनुरूप धितरण प्रणाली के उपयोगकताष भी शाधमल

होंगे।

2.2.2 सधचि को छोडकर अध्यि और सदस्य, पैनल के अांशकाधलक सदस्य होंगे। समीिा पैनल में आम तौर पर धनम्नधलधखत सदस्य

शाधमल होंगे धजनके पास उपयोधगताओं द्वारा धबजली आपूर्तष से सांबांधित तकनीकी मामलों का ज्ञान और व्यािहाररक अनुभि

ोगा। आयोग जितरण कोड समीषम ा पैिल के अध्यषम और सजचि को जितरण लाइसेंसधाठरयों के सदस्ट्यों में से रो ेिि के आधार

पर िाजमत करेगा, लेदकि दकसी भी समय, अध्यषम और सजचि एक ी जितरण लाइसेंसधारी से संबंजधत ि ीं ोंगे।

सधचि समीिा पैनल का पूणषकाधलक सदस्य होगा। समीिा पैनल के सदस्य इस प्रकार होंगे:

क) प्रत्येक धितरण लाइसेंसिारी से एक िररष्ठ तकनीकी अधिकारी जो कायषकारी अधभयांता के पद से नीचे न हो।

ख) पारेषण उपयोजगता या एसएलडीसी से एक सदस्य।

ग) सभी पारेषण लाइसेंसिाररयों का प्रधतधनधित्ि करने के धलए पारेषण लाइसेंसिारी से एक सदस्य। ऐसे सदस्य का कायषकाल

समाप्त होने के बाद, एक अलग पारेषण लाइसेंसिारी (यदद षम ेत्र में पठरचालि कर र ा ै) का प्रधतधनधि समीिा पैनल का

सदस्य होगा।

घ) कैधप्टि पािर प्लाांट, सह-उत्पादन इकाइयों, थमषल पािर प्लाांट और निीकरणीय ऊजाष सांयांत्रों में से एक सदस्य, केंद्र िाजसत

प्रदेि िम्मू और कश्मीर ि केंद्र िाजसत प्रदेि लद्दाख में ऐसे सभी उपयोगकताषओं का प्रधतधनधित्ि करेगा।

ङ) धितरण प्रणाधलयों से जुडे ओपन एक्सेस िाहक।

च) प्रत्येक औद्योजगक, कृजष, घरेलू और िाजणजज्यक उपभोक्ताओं का प्रजतजिजधत्ि करिे िाला एक सदस्ट्य।

छ) ऐसे अन्य सदस्य धजन्हें आयोग धनदेधशत कर सकता है और उधचत पा सकता है।

ि) आयोग धितरण कोड समीिा पैनल में सेिा देने के धलए सांभाधित उम्मीदिारों की एक सूची धिकधसत करेगा, जो धितरण

लाइसेंसिारी के परामर्श से धिधभन्न धहत समूहों के सांतुलन को दशाषता है।

6

THE GAZETTE OF INDIA : EXTRAORDINARY

[PART III—SEC.4]

2.2.3 समीिा पैनल के सदस्यों का कायषकाल आम तौर पर दो िषि का होगा जब तक कक िह ककसी भी कारण से समीिा पैनल का

सदस्य नहीं रह जाता। समीिा पैनल के अध्यि आयोग की मांजूरी से ऐसे सदस्यों के प्रधतस्थापन पर सांयुि रूप से धिचार करेंगे।

2.2.4 पैनल की कायषप्रणाली का समन्िय समीिा पैनल के सधचि द्वारा दकया िािा चाज ए।

2.2.5 आयोग समीिा पैनल के सदस्यों के नाम प्रकाधशत करेगा और प्रत्येक धितरण लाइसेंसिारी को भी इसकी सूचना देगा।

2.2.6 समीिा पैनल के कामकाज के मॉडल कोड को समीिा पैनल की पहली बैठक में अांधतम रूप कदया जाएगा।

2.3

समीिा पैनल के कायष

समीषम ा पैिल के कायि इस प्रकार ोंगे:

क) जितरण कोड का रखरखाि और जिरंतर िांच और समीषम ा के त त कायि।

ख) ककसी भी उपयोगकताष द्वारा समीिा के धलए ककए गए सभी अनुरोिों पर धिचार करना और ऐसे पररितषनों के कारणों के साथ

धितरण कोड में बदलाि के धलए उनकी धसफाररशों का प्रकाशन।

ग) धितरण कोड की व्याख्या और कायाषन्ियन पर मागषदशषन प्रदान करें।

घ) ककसी भी उपयोगकताष द्वारा उठाई गई समस्याओं की जाांच करना और साथ ही समस्याओं का समािान करना।

ङ) यह सुधनधित करना कक धितरण कोड में प्रस्ताधित पररितषन/सांशोिन उस समय लागू मानक तकनीकी मैनुअल या

कदशाधनदेशों, कोड, कानूनों, अधिधनयमों, धनयमों और धिधनयमों के अनुरूप और सांगत हैं।

2.4

समीिा और सांशोिन

2.4.1 धितरण कोड में ककसी भी सांशोिन की माांग करने िाले उपयोगकताषओं को समीिा पैनल के सधचि को धलधखत अनुरोि

भेजना होगा और एक प्रधत आयोग को भेजनी होगी। यकद अनुरोि सीिे आयोग को भेजा जाता है, तो उसे समीिा पैनल के

सधचि को भेजा जाएगा जो सांबांधित सांस्थाओं और आयोग द्वारा धनदेधशत ऐसे अन्य व्यधियों के परामशष से धितरण कोड

प्राििानों की समीिा करेगा। सधचि प्रस्ताधित पररितषनों/सांशोिनों को उधचत समय सीमा के भीतर सभी पैनल सदस्यों को

उनकी धलधखत रटप्पधणयों के धलए प्रसाररत करेगा या सधचि अध्यि के परामशष से समीिा पैनल की बैठक बुला सकता है।

इस बातचीत/चचाि के आधार पर, आयोग की मंिूरी के बाद जितरण कोड में आिश्यक संिोधि/पुिरीषम ण िाजमल दकए िा

सकते ैं।

2.4.2

सधचि पैनल की प्रत्येक समीिा बैठक के समापन पर आयोग को धनम्नधलधखत ररपोटष भेजेंगे:

क) ऐसी समीषम ा के पठरणाम पर ठरपो ि।

ख) धितरण कोड और उसके औधचत्य में कोई प्रस्ताधित सांशोिन।

ग) समीिा के समय उपयोगकताषओं द्वारा प्रस्तुत सभी धलधखत अभ्यािेदन और आपधत्तयााँ।

2.4.3

धितरण सांधहता में सभी सांशोिनों के धलए आयोग के अनुमोदन की आिश्यकता होती है। सधचि, आयोग की मांजूरी के बाद,

धितरण कोड में सांशोिन प्रकाधशत करेगा। समीिा पैनल ऐसे मामलों में छूट के धलए प्रस्ताि भी प्रस्तुत कर सकता है जहाां

उपयोगकताषओं/धितरण लाइसेंसिाररयों को धितरण कोड की आिश्यकताओं को पूरा करने में करठनाई होती है।

2.4.4

धपछले सांस्करण से कोई भी पररितषन हाधशये में स्पष्ट रूप से अांककत दकया िािा चाज ए। इसके अलािा, सांशोधित सांस्करण के

सामने एक पुनरीिण पत्रक रखा जाएगा, धजसमें प्रत्येक पररिर्तषत उप-अनुभाग की सांख्या और ऐसे पररितषन के कारणों का

उललेख होगा।

2.4.5

सधचि निीनतम सांशोिनों को शाधमल करते हुए धितरण कोड की प्रधतयाां बनाए रखेगा और इसे ककसी भी जरूरतमांद व्यधि

को उधचत कीमत पर उपलब्ि कराएगा।

[भागIII—खण् ड 4]

भारत का रािपत्र : असाधारण

7

2.4.6

आयोग, लाइसेंसिारी के आिेदन पर या अन्यथा, जब भी धस्थधत हो, समीिा पैनल की आपातकालीन बैठक बुला सकता है

और धितरण कोड में ऐसे पररितषन और सांशोिन कर सकता है जैसा िह उधचत समझे।

अध्याय - 3 धितरण योजना कोड

3.1

उद्देश्य

जितरण योििा संज ता के उद्देश्य जिम्नजलजखत ैं:

(क) धनम्नधलधखत मानकों के अनुरूप धिश्वसनीयता की धनर्दष्ट धडिी के साथ एक सुरधित और ककफायती सांचालन के धलए धितरण

प्रणाली की योजना, धडजाइन और धनमाषण को सिम करना:

(i)

धितरण प्रणाली योजना और सुरिा मानक।

(ii)

धिद्युत अधिधनयम 2003 के तहत प्राधिकरण द्वारा धनिाषररत जिद्युत प्रणाली प्रबांिन और सांचालन मानक और जिद्युत

प्रणाली सुरिा मानक के तहत धितरण प्रणाली पर लागू प्राििान।

(iii)

िैिाधनक अधिधनयम और धनयम, जो लागू हैं,

(iv)

प्रासांधगक भारतीय मानक धिधनदेश, यकद लागू हो। जिर्दिष्ट सीमा के अिुसार जिचलि की अिुमजत दी िा सकती ै;

ालााँदक, दकसी भी जस्ट्थजत में, सुरषम ा और संरषम ा में बाधा ि ीं आिी चाज ए।

(v)

आरईसी (िामीण धिद्युतीकरण धनगम) धनमाषण मानक और मैनुअल।

(ख) धितरण प्रणाली से जुडे या इसके साथ सांबांि चाहने िाले ककसी भी उपयोगकताष द्वारा इसके उपयोग को सुधििाजनक बनाने

के धलए,

(ग) सामान्य जिद्युत इं रफेस के कुिल संचालि के जलए मािकों को पूरा करिे के जलए संबंजधत जितरण लाइसेंसधाठरयों और

उपयोगकतािओं द्वारा पालि की िािे िाली तकिीकी ितों को जिधािठरत करिा,

(घ) धितरण लाइसेंसिारी और उपयोगकताषओं के बीच प्रणाली धनयोजन डेटा के आदान-प्रदान की प्रकक्रया धनिाषररत करना,

(ङ) उपयोगकताषओं को अपने स्ियां के प्रणाली के कनेक्शन, योजना और धिकास के धलए आिश्यक जानकारी प्रदान करना और

उन्हें धितरण प्रणाली के अनुकूल बनाना,

(च) जितरण लाइसेंसधारी को केंद्रीय/राज्य जग्रड कोड, िैसा भी मामला ो, में जिस्ट्तृत आिश्यक डे ा प्रस्ट्तुत करिे में एस ीयू के

साथ स योग करिे में सषम म बिािा।

3.2

धनयोजन नीधत

3.2.1 धितरण योजना कोड धितरण प्रणाली की उधचत योजना और धिकास के धलए धितरण लाइसेंसिारी द्वारा अपनाए जाने िाले

तकनीकी और धडजाइन मानदांड और प्रकक्रयाओं को धनर्दष्ट करता है। यह सांधहता धितरण प्रणाली के उपयोगकताषओं पर उनकी

योजना और धिकास के धलए भी लागू होती है, जहाां तक िे धितरण प्रणाली को प्रभाधित करते हैं।

3.2.2 उपयोगकताषओं की आिश्यकता के कारण धितरण प्रणाली के धिस्तार या सुदृढीकरण की आिश्यकता हो सकती है।

कुछ मामलों में, धितरण लाइसेंसिारी को कनेक्शन सबांदु/इांटरफेस सबांदु पर पारेषण प्रणाली की िमता के धिस्तार या सुदृढीकरण

की माांग करने की भी आिश्यकता हो सकती है। यह नीचे उधललधखत कई कारणों से उत्पन्न हो सकता है, लेककन यहीं तक

सीधमत नहीं है:

(क)

दकसी भी उपयोगकताि द्वारा अपिे प्रणाली में एक जिकास िो प ले से ी जितरण प्रणाली से िुडा हुआ ै;

(ख)

उपयोगकताष के प्रणाली और लाइसेंसिारी के प्रणाली के बीच एक नए किेक्िि बबंदु/इं रफेस बबंदु का पररचय;

8

THE GAZETTE OF INDIA : EXTRAORDINARY

[PART III—SEC.4]

(ग)

सुरिा मानकों को पूरा करने, सांचालन में बािाओं को दूर करने आकद के धलए धितरण प्रणाली की िमता बढाना और माांग में

सामान्य िृधद्ध को समायोधजत करना;

(घ)

धितररत निीकरणीय ऊजाष स्रोतों, बैटरी भांडारण, इलेधक्िक िाहनों और चार्जिंग बुधनयादी ढाांचे आकद का पररचय।

3.2.3 धितरण प्रणाली के धिकास की योजना पहले से बनाई जानी चाधहए, धजससे आिश्यक िैिाधनक मांजूरी, सहमधत या मागष पत्र

प्राप्त करने, धिस्तृत इांजीधनयटरांग, धडजाइन और धनमाषण कायष को करने और पूरा करने के धलए पयाषप्त समय धमल सके। महत्िपूणष

गधतधिधियों के धलए पयाषप्त समय देने और सभी गधतधिधियों को कुशल तरीके से समन्िधयत करने के धलए उपयुि प्रबांिन

तकनीकों को लागू दकया िािा चाज ए। योजना बनाते समय ही इनका ध्यान रखा जाएगा।

3.3

डेटा लोड करिा

3.3.1 जितरण लाइसेंसधारी किेक्िि बबंदु/इं रफेस बबंदु पर उपलब्ध मी टरंग डे ा से पारेषण लाइसेंसधारी के संबंजधत सबस्ट् ेिि

द्वारा संचाजलत षम ेत्र के जलए लोड िि जिकजसत करेगा। इस तरह के डेटा को उसके धितरण प्रणाली को संचाजलत करने िाले

प्रत्येक सबस्टेशन के लोड िक्रों को धमलाकर आपूर्तष के पूरे िेत्र के धलए सांकधलत दकया िािा चाज ए। धितरण लाइसेंसिारी डेटा

एकत्र करेंगे और नेटिकष के पािर फैक्टर को मैप करेंगे (धिधशष्ट धितरण िाांसफामषर पर मीटर स्थाधपत करके फीडर-िार और

साथ ही उपभोिा श्रेणी के अनुसार)।

3.3.2 कनेक्शन सबांदुओं/इांटरफेस सबांदुओं पर स्थाधपत ऊजाष मीटरों में दर्ज धितरण प्रणाली द्वारा खींची गई िास्तधिक ऊजाष को आपूर्तष

के समि िेत्र में िास्तधिक ऊजाष धबक्री के साथ धमलाया जाएगा। इन आांकडों से गणना की गई कुल धितरण हाधनयाां हर िषि

टैररफ याधचका दाधखल करते समय आयोग को प्रस्तुत की जाएांगी।

3.3.3 कनेक्शन चाहने िाले 1 मेगािाट और उससे अधिक की माांग िाले सभी उपयोगकताषओं को अपना लोड डेटा/लोड की धिशेर्ताएां

और अन्य प्रासांधगक धििरण धितरण लाइसेंसिारी को प्रस्तुत करना होगा जैसा कक पठरजिष्ट 1 में बताया गया है।

3.3.4 धितरण प्रणाली से जुडे एांबेडेड जनरेटर और नए कनेक्शन चाहने िालों को पठरजिष्ट 2 में धनर्दष्ट प्रारूप में योजना डेटा प्रस्तुत

करना होगा।

3.3.5 धितरण लाइसेंसिारी एक ही स्थान पर 1 मेगािाट और उससे अधिक का भार प्राप्त करने के इच्छुक उपभोिाओं के सांबांि में

भार के िास्तधिक धिकास की धनगरानी के धलए धिशेर् देखभाल करेगा। यदद अपिे जितरण प्रणाली से किेक्िि चा िे िाले

उपयोगकताि को इसकी आिश्यकता ो। तो जितरण लाइसेंसधारी अपिी ओर से जिद्युत उपकरण के जडिाइि और चयि के जलए

प्रासंजगक डे ा, सुरषम ा के उद्देश्य से मी टरंग और ठरले का जििरण और जसस्ट् म डे ा प्रस्ट्तुत करेगा िैसा दक अिुबंध 3 में बताया

गया ै। जितरण लाइसेंसधारी को जसस्ट् म डे ा को जियजमत रूप से और िषि में कम से कम एक बार अद्यति करिा चाज ए।

3.4

पूिाषनुमान पद्धधत

3.6.3 धितरण लाइसेंसिारी एक अलपकाधलक माांग पूिाषनुमान तैयार करेगा (राज्य पारेषण उपयोजगता (एसटीयू) या एसएलडीसी को

अंतरराज्यीय पारेषण प्रणाली के धलए 5 िषि आगे की िार्र्षक योजना के अनुरूप िार्र्षक योजना प्रकक्रया तैयार करने में सिम

बनाने के धलए)। इसे धपछले धित्तीय िर्ष को आिार मानकर और अगले पाांच िर्ों में आपूर्तष के िेत्र में धिधभन्न िेत्रों के समि

धिकास को ध्यान में रखते हुए अगले 5 िर्ों की माांग का अनुमान लगाने के बाद तैयार दकया िािा चाज ए। उसे सभी प लुओं

िैसे सरकारी िीजत/आर्थिक जिकास आदद पर जिचार करिे के बाद अगले पांच िषों के जलए भार पूिािुमाि पर पहुंचिे के जलए

जििेकपूणि प्रथाओं का पालि करिा चाज ए। इस प्रदिया के दौराि ि जपछले भार पूिािुमाि के अिुसार भार के अमल में आिे

की जस्ट्थजत की भी समीषम ा करेगा। इसके अलािा ये पूिाषनुमान सीईए द्वारा राष्ट्रीय स्तर पर धिकधसत की जाने िाली योजना के

अनुरूप होंगे। पूिाषनुमान में बदलाि को धितरण लाइसेंसिारी द्वारा तब शाधमल दकया िािा चाज ए, जब धितरण लाइसेंसिारी

को इसकी जानकारी होगी और पूिाषनुमान को सालाना सांशोधित दकया िािा चाज ए।

3.6.4 प्रत्येक टैररफ िगष में ऊजाष की धबक्री एक उपयुि साांधख्यकीय पद्धधत को अपनाकर आिार िर्ष से सांबांधित आांकडों पर

पूिाषनुमाधनत अिधि में अनुमाधनत की जाएगी।

[भागIII—खण् ड 4]

भारत का रािपत्र : असाधारण

9

3.6.5 अनुमानों में गैर-धिधशष्ट भार, 1 मेगािाट और उससे अधिक के धिधशष्ट और पहचाने गए भार, और माांग पि प्रबांिन के प्रभाि,

यकद कोई हो, और ऊजाष सांरिण के धलए अनुमाधनत सामान्य िृधद्ध को ध्यान में रखा जाएगा।

3.6.6 प्रत्येक कनेक्शन सबांदु/इांटरफेस सबांदु पर अजधकतम भार आिश्यकताओं का अनुमान लगाया जाएगा। प्रत्येक कनेक्शन

सबांदु/इांटरफेस सबांदु पर अजधकतम भार आिश्यकता अधनिायष रूप से यह सुधनधित करेगी कक िाांसधमशन उपयोधगता या

एसएलडीसी कनेक्शन सबांदु/इांटरफेस सबांदु तक पारेषण प्रणाली में िमता पयाषप्तता बनाए रखने के धलए ककए जाने िाले

सुिारात्मक उपायों का धनिाषरण कर सकती है। इससे पारेषण उपयोजगता (एसटीयू) को सांगत पारेषण प्रणाली धिकधसत करने

में सुधििा होगी।

ालााँदक, यदद जितरण लाइसेंसधारी को एक कॉम्पैक् षम ेत्र में कई किेक्िि बबंदुओं/इं रफेस बबंदुओं पर जबिली प्राप्त ोती ै,

िो एक टरंग में आपस में िुडे हुए ैं, तो ऐसा जितरण लाइसेंसधारी प्रत्येक किेक्िि बबंदु/इं रफेस बबंदु पर समग्र

अल्पकाजलक मांग पूिािुमाि को पारेषण उपयोजगता के साथ पारस्ट्पठरक रूप से चचाि और स मजत के अिुसार जभन्नता या

स यता के साथ अग्रेजषत करेगा।

3.6.7 आपूर्तष िेत्र के धलए कुल ऊजाष और अजधकतम भार आिश्यकताओं का अनुमान लगाया जाएगा। जितरण लाइसेंसधारी

अल्पकाजलक मांग पूिािुमाि अग्रेजषत करेगा पारेषण उपयोजगता (एस ीयू) और आयोग को िार्षिक आधार पर आपूर्ति षम ेत्र के

जलए अजधकतम भार आिश्यकता के साथ-साथ कुल ऊिाि और अजधकतम भार मांग के जलए जिम्नजलजखत जििरण के साथ,

जिसके आधार पर पूिािुमाि लगाया िाता ै, प्रत्येक किेक्िि बबंदु/इं रफेस बबंदु के जलए अल्पकाजलक मांग पूिािुमाि

अग्रेजषत करेगा:

(क) डेटा,

(ख) कायषप्रणाली,

(ग) िारणाएाँ।

3.6.8 यह सभी धितरण लाइसेंसिाररयों की धजम्मेदारी होगी कक िे अपने आपूर्तष िेत्र के धलए माांग पूिाषनुमान तैयार करने में

िाांसधमशन लाइसेंसिाररयों के साथ पूणष सहयोग करें। जितरण लाइसेंसधारी अगले 5 िषों की अिजध के जलए पारेषण

उपयोजगता (एस ीयू) को आिश्यक अजधकतम भार और ऊिाि पूिािुमाि प्रस्ट्तुत करेगा और लागू (राज्य जग्रड कोड) जिजियमों में

िर्णित अिुसार, संभाजित योििा तैयार करिे में पारेषण उपयोजगता या एसएलडीसी को सषम म करिे के जलए इसे सालािा 31

माचि तक एस ीयू को िमा करेगा।

3.6.9 लाइसेंसिारी लागू (राज्य धिड कोड) धिधनयमों के तहत एसटीयू द्वारा तैयार ककए गए प्रारूपों पर पारेषण उपयोजगता

(एसटीयू) और अन्य धितरण प्रणाली प्रधतभाधगयों को सांपूणष धसस्टम डेटा की आपूर्तष करेगा।

3.5

तकनीकी और धडजाइन मानदांड

धितरण लाइसेंसिारी धनम्नधलधखत तकनीकी और धडजाइन मानदांडों के आिार पर अपनी धितरण प्रणाली की योजना और

धिकास करेगा:

1.

धितरण लाइसेंसिारी के प्रणाली से जुडे सभी मौजूदा उपयोगकताषओं की भार की मांग और धितरण लाइसेंसिारी की प्रणाली

से कनेक्शन चाहने िाले सभी उपयोगकताषओं को ध्यान में रखा जाएगा। सभी उपकरणों और सर्कषटों में सुरधित, ककफायती और

धिश्वसनीय तरीके से धबजली की उनकी जरूरतों को पूरा करने की पयाषप्त िमता होनी चाधहए।

2.

धितरण लाइसेंसिारी अपने आपूर्तष िेत्र में उपभोिाओं की प्रत्येक श्रेणी की भार की मांग का िार्र्षक आिार पर या आयोग

द्वारा धनणषय के अनुसार अधिक बार आकलन और पूिाषनुमान करेगा।

3.

जितरण लाइसेंसधारी को उपभोक्ताओं द्वारा जबिली के उपयोग की प्रकृजत और अपिे षम ेत्र में जिद्युत ऊिाि और ऊिाि के अन्य

िैकजल्पक स्रोतों का उपयोग करिे के तरीके का संपूणि ज्ञाि ोिा चाज ए। भार पूिाषनुमान में इन सभी को अन्य सांरिण

कायषक्रमों और माांग पि प्रबांिन या ऑफ-पीक उपयोग कायषक्रमों के साथ ध्यान में रखा जाएगा, धजन्हें लाइसेंसिारी प्रायोधजत

कर सकता है, धजसके पररणामस्िरूप िर्ों से उपभोिाओं की उपयोग की जाने िाली ऊजाष और चरम माांग में कमी आएगी।

10

THE GAZETTE OF INDIA : EXTRAORDINARY

[PART III—SEC.4]

4.

धितरण लाइसेंसिारी उपभोिाओं के ऊजाष उपयोग पैटनष का िणषन करने िाले डेटा के व्यिधस्थत सांिह और ऊजाष और माांग

पूिाषनुमान के धलए इन डेटा के धिश्लेर्ण के धलए एक उधचत भार पूिाषनुमान कायषक्रम लागू करेगा। इस प्रयोजन के धलए,

उपभोिाओं को सभी टैररफ श्रेधणयों में धिभाधजत दकया िािा चाज ए और मोटे तौर पर धनम्नधलधखत िगों में धिभाधजत ककया

जा सकता है:

(क) घरेलू श्रेणी;

(ख) गैर-घरेलू श्रेणी;

(ग) िाधणधज्यक श्रेणी;

(घ) कृधर् श्रेणी;

(ङ) औद्योधगक श्रेणी; और

(च) खुदरा आपूर्तष टैररफ आदेश में आयोग द्वारा धनिाषररत कोई अन्य टैररफ श्रेणी।

प्रत्येक िेत्र द्वारा उपभोग की जाने िाली ऊजाष का पैटनष और भार की माांग, अधिकतम माांग की अिधि आकद, प्रत्येक िेत्र से

उसकी धिधभन्न मौसमी आिश्यकताओं के धलए प्रधतधनधि नमूने लेने िाले नमूना सिेिणों के आिार पर धनिाषररत की जाएगी।

इन नमूना सिेिणों के धलए एक उपयुि प्रश्नािली तैयार की जाएगी और प्राप्त आांकडों का उपयुि साांधख्यकीय मॉडल का

उपयोग करके धिश्लेर्ण दकया िािा चाज ए। इसके आिार पर, धितरण लाइसेंसिारी समय-समय पर उपलब्िता से मेल खाने के

धलए माांग पि प्रबांिन तकनीकों को लागू करेगा।

5.

भार पूिाषनुमान कायषक्रम धनम्नधलधखत का आकलन करेगा:

(क) जसस्ट् म पीक के समय दैजिक, माजसक, मौसमी या िार्षिक मांग

(ख) धसस्टम पीक के कदन के धलए प्रधत घांटा माजसक, मौसमी या िार्षिक मांग,

(ग) महीने, मौसम या िर्ष के अनुसार प्रत्येक श्रेणी के धलए कुल ऊजाष खपत।

6.

उपरोक्त जिश्लेषण के पठरणामों के आधार पर, ि ां भी लागू ो, उपयुक्त आधुजिक पूिािुमाि उपकरणों का उपयोग करके भार

पूिािुमाि लगाया िाएगा।

7.

जितरण और पारेषण प्रणाली के बीच दकसी भी जिद्युत इं रफेस पर इष्टतम सर्कि लोबडंग और सर्कि की अजधकतम संख्या इस

कोड के अध्याय - 4 , जिद्युत प्रणाली प्रबंधि और ऑपरेट ंग मािक के त त जितरण प्रणाली और जिद्युत अजधजियम 2003 के

अंतगित प्राजधकारी द्वारा जिधािठरत जिद्युत प्रणाली सुरषम ा मािक, के अंतगित जितरण प्रणाली के त त उजल्लजखत जितरण प्रणाली

योििा और सुरषम ा मािकों के अिुरूप ोगी।

8.

ि ां तक संभि ो, जिम्नजलजखत के जलए अलग सर्कि उपलब्ध कराए िाएंगे:

(क) शहरी गैर-औद्योधगक धबजली आपूर्तष,

(ख) शहरी औद्योधगक धबजली आपूर्तष,

(ग) िामीण आपूर्तष -: (i) कृधर् आपूर्तष, (ii) गैर-कृधर् आपूर्तष

9.

आपातकालीि संचालि के दौराि भार प्रबंधि की सुजिधा के जलए भार को यथासंभि अलग-अलग लोड ब्लॉकों में व्यिजस्ट्थत

दकया िािा चाज ए।

10.

सबस्ट् ेििों, कैपेजस र इंस्ट् ॉलेिि, जितरण रांसिामिर से आउ ले की जस्ट्थजत का पता लगािे और उजचत सीमा के भीतर िोल् ेि

जभन्नता और ऊिाि ाजि को रोकिे के जलए भार प्रिा और अन्य प्रणाली अध्ययि आयोजित दकए िाएंगे।

11.

आसान प्रधतस्थापन और दुकानों में स्पेयर की सूची में कमी की सुधििा के धलए उपकरण और धसस्टम धडजाइन के धनम्नधलधखत

मापदांडों को मानकीकृत दकया िािा चाज ए:

[भागIII—खण् ड 4]

भारत का रािपत्र : असाधारण

11

(क) धबजली िाांसफामषर की िमता,

(ख) धितरण िाांसफामषर की िमताएां और धडजाइन,

(ग) सबस्टेशन / धस्िसचांग स्टेशन लेआउट,

(घ) पोल माउांटेड सबस्टेशन,

(ङ) बस बार के आकार,

(च) सर्कषट ब्रेकर और उपकरण िाांसफामषर की िमता और रेटटांग,

(छ) अर्थिंग,

(ि) तधडत अिरोिक,

(झ) धनयांत्रण पैनल,

(ञ) स्टेशन बैटररयाां,

( ) अधिशामक यांत्र।

(ि) रखरखाि उपकरण

(ड) सुरिा उपकरण

(ढ) ऊजाष मीटर

(ण) तार और सहायक उपकरण

(त) इांसुलेटर और सहायक उपकरण

12.

जितरण प्रणाली की योििा में मेिा जितरण प्रणाली के जलए सुरषम ा मािकों और सुरषम ा मािकों की आिश्यकताओं से

समझौता दकए जबिा लागत प्रभाििीलता और ऊिाि ाजि में कमी को मेिा ध्याि में रखा िाएगा।

13.

जितरण लाइसेंसधारी उस समय प्रचजलत प्रौद्योजगकी में प्रगजत को समायोजित करिे के जलए अन्य सभी उपायों के साथ-साथ

जिम्नजलजखत को ध्याि में रखते हुए जितरण प्रणाली के जिस्ट्तार और सुदृढीकरण की योििा बिाएगा:

(क) एचटी और एलटी लाइन की लांबाई का आर्थषक अनुपात,

(ख) एररयल बांच कांडक्टर का उपयोग,

(ग) भूधमगत केबल,

(घ) धिद्युत भार केंद्रों पर धितरण िाांसफामषरों की सांख्या और उनके स्थान को अनुकूधलत करना।

3.6

ऊजाष लेखापरीिा

3.6.1 धितरण लाइसेंसिारी ऊजाष लेखापरीिा के धलए जिम्मेदारी केंद्र बनाएगा। िे माह/िर्ष-िार धितरण घाटे की गणना करेंगे और

अपने सांबांधित िेत्रों के धलए ऊजाष बैलेंस शीट तैयार करेंगे।

3.6.2 धितरण लाइसेंसिारी ऊजाष लेखापरीिा के माध्यम से तकनीकी और िाधणधज्यक घाटे को अलग करने के धलए एक प्रणाली

स्थाधपत करेगा और बनाए रखेगा। ऐसी प्रत्येक इकाई के धलए पहचाने गए िेत्र में सभी इनकसमांग/आउटगोइांग फीडरों के धलए

कम से कम 45 कदनों की डेटा बनाए रखने की िमता िाले इांटरफेस मीटर स्थाधपत ककए जाएांगे।

3.6.3 जितरण लाइसेंसधारी प्रत्येक जिम्मेदारी केंद्र में सिोत्तम संभि तरीके से दकए गए डे ा और जिश्लेषण को संकजलत करते हुए

अपिे कुल प्रणाली की ऊिाि लेखापरीषम ा करेगा। प्रत्येक सबस्ट् ेिि से प्राप्त ऊिाि को उपयुक्त ऊिाि मी रों के साथ स्ट्थाजपत सभी

आउ गोइंग िीडरों के 11 केिी र्मिल जस्ट्िचजगयर पर मापा िाएगा तादक प्रत्येक िीडर को आपूर्ति की िािे िाली ऊिाि

12

THE GAZETTE OF INDIA : EXTRAORDINARY

[PART III—SEC.4]

स ीक रूप से उपलब्ध ो। इसकी तुलना माधसक ऊजाष धबक्री के सांबांधित आांकडों से की जाएगी और प्रत्येक फीडर के धलए

धितरण हाधन की गणना की जाएगी। यकद धितरण लाइसेंसिारी ने 11 केिी पर टरांग मेन धसस्टम अपनाया है और प्रत्येक फीडर

के धलए धितरण घाटे का धनिाषरण करने में करठनाई हो रही है, तो धितरण लाइसेंसिारी आपूर्तष के समि िेत्र के धलए धितरण

घाटे की गणना करेगा।

3.6.4 पयाषप्त धनिेश और शासन में उपयुि सुिार के साथ घाटे में कमी के धलए एक कायष योजना तैयार की जाएगी और िार्र्षक

राजस्ि आिश्यकता फाइसलांग के साथ आयोग को सालाना प्रस्तुत की जाएगी। जितरण लाइसेंसधारी जियजमत अंतराल में ऊिाि

लेखापरीषम ा आयोजित करिे के जलए "ऊिाि दषम ता ब्यूरो (जबिली जितरण कंपजियों में ऊिाि लेखापरीषम ा के संचालि के जलए

तरीके और अंतराल) जिजियम, 2021 और इसके संिोधिों के त त ददए गए प्रािधािों का पालि करेगा और आयोग को

आिश्यक ठरपो ि प्रस्ट्तुत करेगा।

अध्याय-4 धितरण प्रणाली योजना एिां सुरिा मानक

4.1

उद्देश्य

धितरण प्रणाली योजना और सुरिा मानक धितरण प्रणाली की योजना पद्धधत के धलए कदशाधनदेश धनर्दष्ट करता है। इस मानक

के दायरे में शाधमल हैं:

(क)

धबजली आपूर्तष की गुणित्ता

(ख)

भार पूिाषनुमान

(ग)

योजना प्रकक्रया.

(घ)

धितरण नेटिकष का सेिा िेत्र।

(ङ)

योजना मानक।

(च)

धिश्वसनीय धिश्लेर्ण।

(छ)

धितरण िाांसफामषर के धडजाइन का मानकीकरण

(ि)

सबस्टेशन लेआउट का मानकीकरण

(झ)

प्रधतकक्रयाशील मुआिजा

(ञ)

सर्िषस मेन्स

( )

मीटटरांग क्यूधबकलस

(ि)

सुरिा मानक

4.2

धबजली आपूर्तष की गुणित्ता

(क) आिृधत्त: रेटेड आिृधत्त 50 हर्टजष होगी। जिद्युत प्रणाली के सभी घटक यह सुधनधित करने के धलए हर सांभि प्रयास करेंगे कक

धिड आिृधत्त 49.9 हर्टजष -50.05 हर्टजष की बैंडधिड्थ के भीतर रहे या जैसा कक भारतीय धिद्युत धिड कोड में सांशोिन के

माध्यम से सीईआरसी द्वारा अधिसूधचत ककया गया उस अिुसार र े।

(ख) िोलटेज: - सामान्य पठरचालि जस्ट्थजतयों के त त प्रणाली के दकसी भी बबंदु पर िोल् ेि घोजषत िोल् ेि से आईएस जिजिदेिों

के त त जिर्दिष्ट मूल्यों से अजधक ि ीं िा चाज ए।

(ग) हामोधनक सामिी: - आईईईई की धसफाररशों के अनुसार, सांिेदनशील भार के धलए आपूर्तष िोलटेज में कुल हामोधनक सामिी

5 प्रधतशत से अधिक नहीं होनी चाधहए, ककसी भी एकल हामोधनक सामिी 3 प्रधतशत से अधिक नहीं होनी चाधहए।

ामोजिक्स उत्पन्न करिे और जितरण प्रणाली को प्रभाजित करिे के जलए जिम्मेदार संबंजधत उपयोगकताि सुधारात्मक

कायिा ी के जलए जिम्मेदार ोगा।

[भागIII—खण् ड 4]

भारत का रािपत्र : असाधारण

13

4.3

भार पूिाषनुमान

4.3.1 धितरण लाइसेंसिारी अपने आपूर्तष िेत्र में सांभाधित भार िृधद्ध और उपभोिाओं के उपभोग पैटनष का धिधिित अनुमान लगाते

हुए पाांच िषि की अिधि के धलए सालाना एक रोसलांग अलपकाधलक भार पूिाषनुमान तैयार करेगा। इस प्रकार बनाया गया

पूिाषनुमान हर िषि उस िर्ष आए िास्तधिक भार और अगले िर्ों के धलए अपेधित अनुमान में पररितषन, यकद कोई हो, के आिार

पर अद्यतन दकया िािा चाज ए।

4.3.2 प्रारांधभक भार अनुमान/आकलन:

(क) घरेलू और िाजणजज्यक भार: घरेलू और िाधणधज्यक िेत्रों में खपत का अनुमान उपभोिाओं की सांख्या और उनकी धिधशष्ट

खपत के आिार पर लगाया जाएगा। िेत्र में उपभोिाओं की सांख्या में धपछली िृधद्ध दर का अध्ययन दकया िािा चाज ए। ऐसे

मामलों में जहाां हाल ही में धबजली की कमी का अनुभि ककया गया है, अपनाई जाने िाली धिकास दर में भधिष्य में

पररकधलपत घरेलू धिद्युतीकरण की बढी हुई गधत के धलए धिकास दर में उधचत माांग-सांबांिी देय भत्ते को ध्यान में रखा जाना

चाधहए। िेत्र में धनयोधजत धिद्युतीकरण के उच्च स्तर को ध्यान में रखा जाना चाधहए। प्रधत उपभोिा ऊजाष खपत का अनुमान

धपछले रुझानों का अध्ययन करने और जीिन स्तर में अपेधित सुिारों को ध्यान में रखने के बाद लगाया जाना चाधहए।

(ख) सािषजधनक प्रकाश व्यिस्था और जल कायष: सािषजधनक प्रकाश व्यिस्था और जल आपूर्तष सुधििाओं में सांभाधित िृधद्ध को

ध्यान में रखते हुए, सािषजधनक प्रकाश व्यिस्था और जल कायों में धबजली की खपत का अनुमान प्रधत ककलोिाट कनेक्टेड भार

की औसत खपत पर आिाररत होगा, जो रुझानों के आिार पर अनुमाधनत दकया िािा चाज ए। सांचालन के घांटों की सांख्या का

अनुमान धपछले रुझानों और धबजली कटौती, यकद कोई िेत्र प्रभाधित हुआ है, को ध्यान में रखते हुए दकया िािा चाज ए।

(ग) कृधर् भार: ससांचाई पांप सेटों के धलए धबजली की आिश्यकता योजना अिधि में पांप सेटों के ऊजीकरण के कायषक्रम, उपलब्ि

सांसािनों और अांधतम भूजल िमता पर आिाररत होगी। पांप सेटों की औसत िमता की गणना कनेक्टेड लोड के मध्य िर्ष के

आांकडों और पांप सेटों की सांख्या को ध्यान में रखकर की जाएगी। प्रधत िर्ष प्रधत आईपी सेट की खपत का अनुमान प्रधतधनधि

नमूना अध्ययन के माध्यम से लगाया जाएगा जब तक कक सभी आईपी सेट की मीटटरांग नहीं हो जाती।

(घ) औद्योधगक भार: औद्योधगक िेत्र के धलए धबजली की आिश्यकताओं का अनुमान धनम्नधलधखत तीन श्रेधणयों के तहत लगाया

जाएगा।

(i)

एल.टी. उद्योग;

(ii)

1 मेगािाट से कम माांग िाले एच.टी उद्योग;

(iii)

1 मेगािाट और उससे अधिक की माांग िाले एच.टी उद्योग।

श्रेणी (i) और (ii) में खपत भधिष्य में होने िाले धिकास पर धिचार करते हुए ऐधतहाधसक डेटा के आिार पर होगी।

श्रेणी (iii) के मामले में, उद्योगपजतयों और उद्योग जिभाग द्वारा दी गई िािकारी के आधार पर प्रत्येक औद्योजगक इकाई के

जलए अलग से प्रषम ेपण दकया िािा चाज ए।

(ङ) गैर-औद्योधगक थोक आपूर्तष: गैर-औद्योधगक उपभोिाओं जैसे अनुसांिान प्रधतष्ठानों, बांदरगाह िस्टों, सैन्य इांजीधनयटरांग

सेिाओं, धबजली पररयोजनाओं को आपूर्तष आकद के धलए थोक आपूर्तष की खपत और इन िेत्रों में सांभाधित भधिष्य के धिकास

के सांबांि में उपलब्ि आांकडों पर पूिाषनुमान के धलए धिचार दकया िािा चाज ए।

(च) अन्य भार: अन्य भार, अनुमान सिोत्तम धनणषय पर आिाररत होंगे।

4.4

भार पूिाषनुमान प्रकक्रया

4.4.1 जिजिष्ट स्ट्थािों और मौिूदा जस्ट्थजतयों पर लागू उपयुक्त तरीकों में से एक को अपिाकर उपरोक्त डे ा और प्रासंजगक सूचकांकों

का उपयोग करके भार पूिािुमाि जिजधयों को अपिाया िाएगा।

14

THE GAZETTE OF INDIA : EXTRAORDINARY

[PART III—SEC.4]

4 . 4 . 2 उपरोि के अलािा, माांग पि प्रबांिन के प्रभाि, लांधबत अनुप्रयोगों के धलए धबजली की आिश्यकता, 50 हर्टजष के करीब

ऑपरेटटांग आिृधत्त में सुिार के कारण माांग में िृधद्ध का भी अनुमान लगाया जाएगा। जितरण लाइसेंसधारी पारेषण प्रणाली के

साथ किेक्िि बबंदु/इं रिेस बबंदु के साथ-साथ भार पूिािुमाि के आधार पर आपूर्ति के समग्र षम ेत्र के जलए अगले पांच िषों में

से प्रत्येक के जलए िार्षिक ऊिाि मांग और अजधकतम मांग से संबंजधत अगले पांच िषों में से प्रत्येक के जलए अजधकतम मांग की

गणिा करेगा। ालााँदक, यदद जितरण लाइसेंसधारी को एक कॉम्पैक् षम ेत्र में कई किेक्िि बबंदुओं/इं रफेस बबंदुओं पर जबिली

प्राप्त ोती ै, िो एक टरंग में आपस में िुडे हुए ैं, तो ऐसा जितरण लाइसेंसधारी प्रत्येक किेक्िि बबंदु/इं रफेस बबंदु पर समग्र

अल्पकाजलक मांग पूिािुमाि को पारेषण उपयोजगता या एसएलडीसी के साथ पारस्ट्पठरक रूप से चचाि और स मजत के अिुसार

जभन्नता या स यता के साथ अग्रेजषत करेगा।

4.4.3 आपूर्ति के षम ेत्र में धकेले गए उपभोक्ताओं की प्रत्येक श्रेणी के जिजिधता कारक को चयजित जिजिष्ट स्ट्थािों पर भार सिेषम ण मी र

की स्ट्थापिा द्वारा काम दकया िािा चाज ए। ऐसे डेटा का ररकॉडष रखा जाएगा और उसे लगातार अद्यति दकया िािा चाज ए।

इन आांकडों के आिार पर पाांच िषि की अिधि के धलए अलपकाधलक भार पूिाषनुमान तैयार दकया िािा चाज ए।

4.5

योजना प्रकक्रया

धितरण प्रणाली की योजना और धिकास इस तरह से दकया िािा चाज ए कक यह प्रणाली इस खांड के खांड 2.0 में बताए अनुसार

धबजली की सुरधित, धिश्वसनीय, ककफायती और गुणित्तापूणष आपूर्तष के साथ सभी श्रेधणयों के उपभोिाओं की आिश्यकताओं

को पूरा करने में सिम हो। हालााँकक, उपभोिा धितरण लाइसेंसिारी को धबजली की गुणित्तापूणष आपूर्तष के धलए सिम बनाने

के धलए पूणष समथषन देगा। धितरण प्रणाली लागू सभी प्रासांधगक कोड, मानकों और अधिधनयमों की िैिाधनक आिश्यकताओं के

अनुरूप होगी।

4.6

योजना मानक

4.6.1 आकार और रेट ंग का मािकीकरण: जबिली कंडक् रों के आकार और जितरण रांसिामिर की रेट ंग का चयि करते समय भजिष्य

के भार जिकास के जलए पयािप्त प्रािधाि दकया िािा चाज ए। धितरण प्रणाली में उपयोग ककए जाने िाले पािर कांडक्टर,

इांसुलेटर, लाइटसनांग अरेस्टर, िाांसफामषर, धस्िचधगयर आकद के आकार को इन्िेंिी को कम करने के उद्देश्य से मानकीकृत दकया

िािा चाज ए और मानक धिधनदेश तैयार ककए जाएांगे।

4.6.2 धितरण लाइनों के धलए धडजाइन मानदांड

1.

ग्रामीण षम ेत्रों में जितरण की रेजडयल प्रणाली अपिाई िा सकती ै और ि ां तक संभि ो ि री षम ेत्रों में कम से कम एक

िैकजल्पक स्रोत से आपूर्ति के प्रािधाि के साथ लूप जसस्ट् म अपिाया िािा चाज ए।

2.

एचटी और एलटी धितरण लाइनें आिश्यक िेत्र में आिश्यकता के अनुसार धनम्नधलधखत में से ककसी एक प्रकार की होंगी।

(क) खुले कांडक्टरों के साथ ओिर-हेड लाइन;

(ख) एररयल बांच्ड केबलस के साथ ओिर-हेड लाइन;

(क) भूधमगत केबल।

3 .

घनी आबादी िाले शहरों में, भारी यातायात घनत्ि िाले िेत्रों में, जहाां तक सांभि हो भूधमगत केबल लगाने पर धिचार दकया

िािा चाज ए। जहाां भी आिासीय स्थानों पर या बगीचों और जांगलों में बहुत सारे पेड पाए जाते हैं, हिाई बांच्ड केबल के साथ

ओिर-हेड लाइन को अपनाया जाएगा। अन्य स्थानों पर खुले कांडक्टरों के साथ ओिर-हेडलाइन को अपनाया जाएगा। योजना

और धडजाइन उद्देश्यों के धलए धनम्नधलधखत मानकों को अपनाया जाएगा:

क)

खुले कांडक्टरों के साथ ओिर-हेड लाइांस का धडजाइन और धनमाषण आम तौर पर आईएस 5613 भाग I, खांड 1 और 2 के

अनुसार होगा।

ख)

कंडक् रों का लंबे समय तक कायि करिे के कारण आकजस्ट्मक िॉ ि सर्कि को रोकिे के जलए एल ी जितरण लाइिों के जलए

कंडक् रों का ऊध्िािधर जिन्यास, अजधमाितः ग्रामीण षम ेत्रों में अपिाया िाएगा क्योंदक ऐसे षम ेत्रों में उपयोग अजधक ोता ैं।

[भागIII—खण् ड 4]

भारत का रािपत्र : असाधारण

15

ग)

टीएलटी और एचटी लाइनों की अधिकतम लांबाई धनिाषररत सीमा के भीतर रखी जाएगी ताकक सुरधित और गुणित्तापूणष

धबजली धितररत की जा सके।

घ)

टीएररयल बांच्ड केबलों के साथ ओिर-हेड लाइांस का धडजाइन और धनमाषण आम तौर पर आरईसी धिधनदेश 32 और

आईएस 14255 के अनुसार होगा।

ङ)

भूजमगत केबल का धडजाइन और धनमाषण आम तौर पर आईएस 1255 के अनुसार होगा।

4.

लाइन सपोटष स्टील, लकडी, आरसीसी या पीसीसी का हो सकता है। आरसीसी और पीसीसी खांभों को उनकी लागत और लांबे

जीिन को देखते हुए अन्य दो खांभों की तुलना में प्राथधमकता दी जाती है। ककसी लाइन के धलए कांडक्टर के आकार का चुनाि

धनम्नधलधखत मानदांडों के आिार पर दकया िािा चाज ए:

i. प्रसाठरत की िािे िाली जबिली और जबिली की ाजि की लागत और इस प्रकार चयजित कंडक् र की लागत पर ब्याि और

मूल्यह्रास िुल्क के अिुसार कंडक् र के आकार का चयि करिे के जलए तकिीकी-आर्थिक अध्ययि आयोजित दकए गए थे;

ii. लाइन की लांबाई

iii. लाइन िोलटेज;

iv. अनुमेय िोलटेज धिधनयमन;

v. याांधत्रक शधि;

4.6.3 धितरण िाांसफामषर के धडजाइन और रेटटांग का मानकीकरण

1.

जितरण रांसिामिर के जडिाइि और रेट ंग को मािकीकृत दकया िािा चाज ए। प्रारांधभक चरण के रूप में, धडजाइन के धलए

आिश्यक धिधभन्न तकनीकी मापदांडों को अब तक अपनाए गए धिधभन्न धडजाइनों के बीच प्रदशषन पर प्राप्त अनुभि के आिार पर

धिधशष्टताओं में शाधमल ककया िािा चाज ए। बाद में, इन िाांसफामषर के प्रदशषन के आिार पर िाांसफामषर के मानक धडजाइन और

उनके धिस्तृत धनमाषण धचत्र धिकधसत ककए जाएांगे। इन्हें भधिष्य की खरीद के धलए अपनाया जाएगा। यह ककसी भी धनमाषता

द्वारा धनर्मषत समान िाांसफामषर के घटकों की अांतर-पररितषनीयता भी सुधनधित करता है।

2.

एक अच्छी गुणित्ता आश्वासि योििा का लक्ष्य जिम्नजलजखत ोिा चाज ए:

क) कच्चे माल की अच्छी गुणित्ता;

ख) धिधनमाषण और धनयधमत परीिणों के दौरान गुणित्ता धनयांत्रण;

ग) धडलीिरी लेते समय स्िीकृधत परीिण;

घ) यादृधच्छक नमूने पर दुकानों पर प्राप्त िाांसफामषर का धनरीिण और परीिण करना;

ङ) यादृधच्छक रूप से चयधनत एक लॉट में एक िाांसफामषर पर गहन परीिण दकया िािा चाज ए। िाांसफामषर को पूरी तरह से

जिघठ त कर कदया जाए। कोर, कॉइल, इन्सुलेशन आकद की गुणित्ता का भौधतक धनरीिण ककया जाता है और इन्सुलेशन और

उपयोग ककए गए अन्य घटकों आकद के नमूनों का परीिण करना।

च) सभी धितरण िाांसफामषरों के धलए न्यूनतम 3 िर्ष की अिधि के धलए प्रदशषन गारांटी सुधनधित करना।

4.6.4 सब-स्टेशन लेआउट का मानकीकरण

धितरण लाइसेंसिारी धिद्युत अधिधनयम, 2003 के प्रासांधगक मानकों, मैनुअल और प्राििानों का पालन करते हुए मानक

लेआउट धिकधसत करेगा। लाइसेंसिारी निीनतम तकनीक के साथ-साथ प्राप्त अनुभि से फीडबैक भी अपनाएगा।

16

THE GAZETTE OF INDIA : EXTRAORDINARY

[PART III—SEC.4]

4.6.5 प्रधतकक्रयाशील मुआिजा

1.

पािर फैक्टर में सुिार, सांतोर्जनक िोलटेज प्रोफाइल बनाए रखने और उप-िाांसधमशन और धितरण घाटे में कमी के धलए

धितरण प्रणाली में उधचत स्थानों पर अन-धस्िच्ड/धस्िच प्रकार के शांट कैपेधसटर स्थाधपत ककए जाएांगे। कैपेधसटर इांस्टॉलेशन का

आकार और स्थान धिश्वसनीय फीलड डेटा के साथ एक उपयुि प्रोिाम का उपयोग करके धनिाषररत दकया िािा चाज ए। हलके

भार अिधि में ओिर िोलटेज से बचने के धलए स्िचाधलत धस्िसचांग आकद जैसे उपयुि एहधतयाती उपाय अपनाए जाएांगे।

2.

शांट कैपेधसटर इांस्टॉलेशन के धलए सबसे उपयुि आकार और स्थान धनिाषररत करने के धलए धितरण लाइसेंसिारी द्वारा शांट

मुआिजे का अनुकूलन अध्ययन आयोधजत दकया िािा चाज ए।

4.6.6 धितरण नेटिकष का सेिा िेत्र

i. धितरण नेटिकष का सेिा िेत्र िह िेत्र है धजसमें एक सबस्टेशन द्वारा आिश्यकतानुसार एक या अधिक सांख्या में फीडरों द्वारा

भार की आपूर्तष की जाती है। धितरण िाांसफामषर और सबस्टेशनों से पोधर्त धितरण नेटिकष, जहाां से 11 केिी फीडर धनकलते हैं,

शुरू में उनके सांबांधित सेिा िेत्रों के भीतर स्ितांत्र नेटिकष के रूप में योजना बनाई जाएगी। इसके अलािा, जहाां भी सांभि हो,

धिफलता की धस्थधत में िैकधलपक आपूर्तष के धलए आसन्न नेटिकष और/या सबस्टेशनों के साथ इांटरकनेक्शन का प्राििान दकया

िािा चाज ए। धितरण लाइनों के धडजाइन में भधिष्य में धबजली आपूर्तष में न्यूनतम रुकािट के साथ उनकी िृधद्ध को सिम करने

के धलए सुधििाएाँ शाधमल की जाएांगी। रास्ते के मौजूदा अधिकार का पूरा उपयोग दकया िािा चाज ए।

ii. धितरण लाइसेंसिारी िेत्र के भीतर िोलटेज धिधनयमन सीमा पार होने की धस्थधत में फीडरों की िमता बढाने के धलए प ले से

पयािप्त उजचत उपाय करेगा।

iii. जितरण िे िकि के जडजाइि की गणिा करिे ेतु उपयुक्त सॉफ़् िेयर का उपयोग जिम्नजलजखत के जिजभन्न लोबडंग जस्ट्थजतयों के

जलए न्यूितम संभि ऊिाि ाजि प्राप्त करिे के जलए दकया िािा चाज ए:

क) धितरण िाांसफामषर का स्थान और िमता;

ख) एलिी और एचिी नेटिकष की रूटटांग;

ग) कांडक्टरों के आकार;

घ) धनयोधजत नई लाइनों के धलए एचटी और एलटी धितरण लाइनों की लांबाई के अनुपात को अनुकूधलत दकया िािा

चाज ए और धितरण घाटे को कम करने के धलए मौजूदा धितरण प्रणाली को चरणबद्ध तरीके से सांशोधित दकया िािा

चाज ए।

ङ) सभी लोसडांग धस्थधतयों के धलए िोलटेज धिधनयमन सीमा।

4.6.7 सर्िषस मेन्स

उपभोक्ताओं के जलए सेिा मेि 230 िोल् एकल चरण और 400 िोल् तीि चरण आपूर्ति के जलए प्रासंजगक आरईसी जिमािण

मािकों के अिुसार रखे िाएंगे और जिद्युत अजधजियम, 2003 के त त प्रासंजगक जियमों के प्रािधािों के अिुरूप ोंगे।

4.6.8 मीटटरांग क्यूधबकल

1.

230 िोलट एकल-चरण आपूर्तष के धलए मीटटरांग एक उपयुि बोडष पर प्रदान की जाएगी, जो िूप और बाररश से सुरधित स्थान

पर धस्थत होगी और रीसडांग लेने के धलए सुधििाजनक धस्थधत में होगी। मीटर के टर्मषनलों को छेडछाड-रोिी और सीलबांद

बनाया जाएगा। 400 िोलट तीन चरण की आपूर्तष के धलए, मीटर और कनेक्शन सधहत सांबांधित मीटटरांग उपकरण एक उपयुि

छेडछाड-रोिी बॉक्स में सांलि ककए जाएांगे। छेडछाड रोिी बॉक्स लॉककांग और सीसलांग उपकरणों के साथ पयाषप्त मजबूती और

धडजाइन का होना चाधहए और इसमें आिश्यक धिद्युत मांजूरी के साथ गमी अपव्यय के धलए पयाषप्त प्राििान होना चाधहए।

जडजाइि को मी र या उसके किेक्िि तक पहुंच के जबिा रीबडंग लेिे में सषम म ोिा चाज ए।

[भागIII—खण् ड 4]

भारत का रािपत्र : असाधारण

17

2.

एच ी उपभोक्ताओं के जलए मी र, अजधकतम मांग संकेतक और जद्वतीयक किेक्िि एक अलग जडब्बे में रखे िाएंगे और अन्य

माध्यजमक उपकरण िैसे उपकरण रांसिामिर और आिश्यक किेक्िि एक अलग मी टरंग जडब्बे में रखे िाएंगे, जिसे छेडछाड

को रोकिे के जलए बंद / सील कर ददया िाएगा।

3.

एचटी मीटटरांग क्यूधबकल दोनों तरफ या कम से कम एक तरफ केबल प्रिेश के धलए उपयुि ोिा चाज ए। उपकरण िाांसफामषर

के धद्वतीयक सर्कषट में ककसी फ़्यूज की अनुमधत नहीं है। भारी िर्ाष िाले िेत्रों में स्थापना के धलए मीटटरांग क्यूधबकल को उपयुि

एपॉक्सी पेंट से पेंट दकया िािा चाज ए। उपकरण िाांसफामषर धनधित अनुपात के होंगे और उनमें कोई नल नहीं होगा।

4.

जबिली रांसिामिर की प्राथजमक प्रिा रेट ंग सामान्य पूणि भार प्रिा से मेल खािी चाज ए और कोर का संतृजप्त बबंदु अजधकतम

प्रिा से अजधक ोिा चाज ए िो सभी िुडे उपकरणों और मिीिरी के एक साथ पूणि भार संचालि के कारण ो सकता ै।

5.

ईएच ी उपभोक्ताओं के जलए, उपकरण रांसिामिर के जद्वतीयक र्मिलों को लॉक और सील कर ददया िाएगा और जद्वतीयक

तारों को उपयुक्त िीआई िाली पाइप में मी टरंग पैिल तक लाया िाएगा। नाली पाइपों में कोई जोड नहीं होना चाधहए। मीटर

यथासांभि उपकरण िाांसफामषर के करीब होने चाधहए और ककसी भी धस्थधत में दस (10) मीटर से अधिक नहीं होने चाधहए।

मीटटरांग पैनल को मौसम प्रधतरोिी और छेडछाड रोिी बॉक्स में रखा जाएगा और सील दकया िािा चाज ए।

4.7

धिश्वसनीयता धिश्लेर्ण

4.7.1 धितरण प्रणाली के धिस्तार और सुिार की योजना में उपभोिाओं को धबजली आपूर्तष की धिश्वसनीयता में सुिार को भी ध्यान

में रखा जाएगा। धिस्तार और सुिार कायषक्रम के कायाषन्ियन से पहले और बाद में धितरण प्रणाली द्वारा पोधर्त िेत्र में धबजली

आपूर्तष के उधचत धिश्वसनीयता सूचकाांक का अनुमान लगाया जाएगा। धितरण प्रणाली की योजना बनाते समय धिश्वसनीयता

में सुिार को भी ध्यान में रखा जाना चाधहए और इस सांबांि में डेटा एकत्र करने के प्रयास ककए जाने चाधहए।

4.7.2 उपभोक्ताओं को जबिली आपूर्ति की जिश्वसिीयता सूचकांक जिधािठरत करिे के जलए समय-समय पर संिोजधत संयुक्त जिद्युत

जिजियामक आयोग केंद्र िाजसत प्रदेि िम्मू और कश्मीर ि केंद्र िाजसत प्रदेि लद्दाख (जितरण लाइसेंसधाठरयों के जलए प्रदिि

के मािक) जिजियम, 2023 के प्रािधािों का लाइसेंसधाठरयों द्वारा पालि दकया िािा चाज ए।

4.7.3 धनम्नधलधखत कारक, जो धिश्वसनीयता सूचकाांकों को प्रभाधित करते हैं, डेटा की उपलब्िता के अिीन माने जाएांगे:

क) िधणक आने िाली आपूर्तष धिफलताएां

ख) 33 एिां 11 दकलोिोल् फीडरों पर िधणक रुकािट

ग) फीडरिार प्रभाधित उपभोिा

घ) (एलटी फीडरों पर ब्रेकडाउन

ङ) लाइनों और फीडरों पर पूिष-धनिाषररत शटडाउन

च) जितरण रांसिामिर के फ़्यूज का ख़राब ोिा

छ) व्यधिगत फ़्यूज बांद ोिा

4.8

धडजाइन, धनमाषण और रखरखाि प्रथाओं के धलए स्थायी सधमधत

4.8.1 जडजाइि, जिमािण और रखरखाि प्रथाओं के जलए, लाइसेंसधारी के तकिीकी सदस्ट्य/जिदेिक की अध्यषम ता में, इस संज ता के

प्रारंभ ोिे से एक म ीिे के भीतर लाइसेंसधारी द्वारा स्ट्थायी सजमजत गठित की िाएगी और इसमें जिम्न िाजमल ोंगे-

(क) लाइसेंसिारी का सबसे िररष्ठ इांजीधनयर (योजना)।

(ख) लाइसेंसिारी का सबसे िररष्ठ इांजीधनयर (सामिी प्रबांिन)

(ग) एसटीयू का सबसे िररष्ठ इांजीधनयर (धडजाइन और योजना); और

(घ) कोई अन्य व्यधि धजसे लाइसेंसिारी उधचत समझे।

18

THE GAZETTE OF INDIA : EXTRAORDINARY

[PART III—SEC.4]

4.8.2 स्थायी सधमधत स्थायी कायषकाल िाली एक सलाहकार सांस्था होगी और प्रत्येक धतमाही में कम से कम एक बार अपनी बैठक

आयोधजत करेगी। स्थायी सधमधत धनम्नधलधखत िेत्रों के अलािा अन्य जिम्नजलजखत मामलों पर लाइसेंसिारी को सुझाि और

धसफाररशें प्रदाि करेगी:-

(क) लाइन सामिी, मीटर और मीटटरांग उपकरण, सर्िषस लाइन सामिी, सब-स्टेशन उपकरण जैसे िाांसफामषर, सर्कषट ब्रेकर,

सीटी/पीटी सेट आकद के धडजाइन और तकनीकी धिधशष्टताओं पर निीनतम प्रथाओं की समीिा और सुझाि देना;

(ख) थोक में उपयोग ककए जाने िाले धिधभन्न उपकरणों और सामधियों के धलए धिक्रेता चयन और शॉटष-धलसस्टांग प्रकक्रयाओं का

सुझाि देना;

(ग) एचटी/एलटी लाइनों और धिड सबस्टेशनों, पोल माउांटेड और अन्य सप्लांथ-माउांटेड सब-स्टेशनों आकद के धनमाषण, सांचालन और

रखरखाि के धलए सिोत्तम उद्योग प्रथाओं और निीन तकनीकों का सुझाि देना;

(घ) आईटी उपकरण और एससीएडीए और अन्य धनयांत्रण प्रणाली जैसी निीनतम प्रौद्योधगकी उन्नयन और प्रकक्रया की धसफाररश

और सुझाि देना;

(ङ) सुरिा, पयाषिरण रखरखाि और प्रदूर्ण मानदांडों के दृधष्टकोण से खतरनाक, अस्िास््यकर प्रथाओं और सामिी पर प्रधतबांि

और प्रधतबांिों की धसफाररश करना।

4.9

सुरिा मानक

4.9.1. जितरण प्रणाली की योििा बिाई िािा चाज ए और उसका रखरखाि दकया िािा चाज ए तादक जितरण लाइसेंसधारी के

उजचत जियंत्रण से परे अप्रत्याजित घ िा की जस्ट्थजतयों को छोडकर जिम्नजलजखत सुरषम ा मािकों को पूरा दकया िा सके।

4.9.2. फीडर, या तो एचटी या एलटी, जो अस्पतालों, श्मशान, हिाई अड्डों, रेलिे स्टेशनों और इसी तरह के महत्िपूणष भारों को

जबिली देते ै, की एक चयनात्मक धस्िसचांग प्रणाली योजना बनाई जाएगी, तादक भार को िैकजल्पक स्ट्िस्ट्थ िीडर पर

स्ट्थािांतठरत करिे के जलए चयिात्मक जस्ट्िबचंग संचाजलत की िा सके। इस सांबांि में हमेशा उधचत सुरिा साििाधनयाां बरती

जाएांगी। फीडर की धिफलता के मामले में, इन धस्िचों को भार के महत्ि के आिार पर तुरांत या तो मैन्युअल रूप से या

स्िचाधलत रूप से सांचाधलत दकया िािा चाज ए।

4.9.3. म त्िपूणि उद्योगों से िुडे िीडर, िो छो ी अिजध के व्यिधाि के प्रजत भी बहुत संिेदििील ैं, उन् ें आपूर्ति की जििलता की

जस्ट्थजत में िैकजल्पक स्ट्िस्ट्थ िीडर पर स्ट्िचाजलत जस्ट्िचओिर की योििा बिाई िािी चाज ए।

4.9.4. धितरण प्रणाली के ककसी भी जबिली ले जाने िाले घटक (उदाहरण के धलए, कांडक्टर, जोड, िाांसफामषर, धस्िचधगयर, केबल और

अन्य उपकरण) में लोसडांग उनकी सांबांधित थमषल सीमा के 75% से अधिक नहीं होगी।

4.9.5. प्रणाली के अनुमाधनत भधिष्य के धिकास को ध्यान में रखते हुए भी प्रणाली में धनयोधजत धस्िचधगयर की टूटने की िमता की

गणना शॉटष सर्कषट स्तर से कम से कम 25% अधिक होनी चाधहए।

4.9.6. प्रत्येक एचटी फीडर, प्राथधमक या माध्यधमक, के धलए आसपास के िेत्र में उपलब्ि समान िोलटेज िगष के उपलब्ि एचटी फीडर

पर मैन्युअल रूप से तुरांत धस्िच करने का प्राििान ककया िािी चाज ए। ककसी भी एचटी फीडर के धलए धडजाइन में ही आपात

धस्थधत के दौरान धनकटिती फीडर में कम से कम 50% भार साझा करने का प्राििान ककया िािी चाज ए।

4.9.7. एकल आकधस्मकता के मामले में; ककसी भी आउटगोइांग 11 दकलोिोल् फीडर को धनयांधत्रत करने िाले ककसी भी सबस्टेशन

उपकरण की जििलता पर, बाजधत भार आमतौर पर सबस्ट् ेिि पर कुल मांग का 50% से अजधक ि ीं ोिा चाज ए। धितरण

लाइसेंसिारी को तीन िषि की अिधि के भीतर इसे 20% तक लाना होगा।

4.9.8. प्रणाली में पयाषप्त स्टैंडबाय िमता होनी चाधहए।

4.9.9.जितरण प्रणाली के जडजाइि में व्यिस्ट्थाओं को इस तर से समायोजित दकया िािा चाज ए दक संयुक्त जिद्युत जिजियामक आयोग केंद्र

िाजसत प्रदेि िम्मू और कश्मीर ि केंद्र िाजसत प्रदेि लद्दाख (जितरण लाइसेंसधाठरयों के जलए प्रदिि का मािक) 2023 के अिुसार

[भागIII—खण् ड 4]

भारत का रािपत्र : असाधारण

19

जबिली की आपूर्ति जिर्दिष्ट अिजध से अजधक समय तक बाजधत ि ो िैसा दक दकसी भी जितरण रांसिामिर के खराब ोिे की जस्ट्थजत

में लाइसेंसधारी द्वारा समय-समय पर संिोजधत दकया िाता ै। इसी प्रकार, र्मिल उपकरण सज त 11 केिी िीडरों की जििलता के

मामले में, जडिाइि में ऐसी व्यिस्ट्था ोिी चाज ए दक जबिली आपूर्ति यथासंभि बाजधत ि ो।

4.10 धनमाषण पद्धधतयााँ

4.10.1. सभी जिद्युत आपूर्ति लाइिें और उपकरण जबिली, इन्सुलेिि और अिुमाजित िॉल् करं के जलए पयािप्त रेट ंग और कतिव्य के

जलए पयािप्त यांजत्रक िजक्त के ोिे चाज ए जिसे स्ट्थापिा की पयािरणीय ितों के त त जिष्पाददत करिे की आिश्यकता ो

सकती ै, और इसका जिमािण, स्ट्थाजपत, संरजषम त, कायि और रखरखाि इस तर से दकया िािा चाज ए तादक मािि, िाििरों

और संपजत्त की सुरषम ा सुजिजित ो सके।

4.10.2. भारतीय मािक ब्यूरो, आरईसी मािक, जिसमें राष्ट्रीय जिद्युत संज ता भी िाजमल ै, की प्रासंजगक आचरण संज ता, यदद कोई

ो, का पालि दकया िा सकता ै। उपयोग की जाने िाली सामिी और उपकरण भारतीय मानक ब्यूरो के प्रासांधगक धिधनदेशों के

अनुरूप होंगे जहाां ऐसे धिधनदेश पहले से ही धनिाषररत ककए गए हैं।

4.10.3. लाइसेंसधारी और उपयोगकताष एचटी/एलटी लाइनों और धिड/धस्िसचांग सब-स्टेशनों के धलए धिधभन्न उपकरणों/कायों के धलए

धनमाषण और रखरखाि मैनुअल तैयार करेंगे और उनका पालन करेंगे। धनमाषण और रखरखाि मैनुअल धनम्नधलधखत को ध्यान में

रखकर तैयार दकया िािा चाज ए:

(क) जिद्युत अजधजियम 2003 की धारा 73 के खंड (ख) के त त केंद्रीय जिद्युत प्राजधकरण द्वारा जिर्दिष्ट जिद्युत संयंत्रों, जिद्युत

लाइिों और जग्रड से किेजक् जि ी के जिमािण के जलए तकिीकी मािक;

(ख) अधिधनयम की िारा 73 के खांड (सी) के तहत केंद्रीय धिद्युत प्राधिकरण द्वारा धनर्दष्ट धिद्युत सांयांत्रों और धिद्युत लाइनों के

धनमाषण, सांचालन और रखरखाि के धलए सुरिा आिश्यकताएां;

(ग) आरईसी धनमाषण मानक और मानक धडजाइन लेआउट;

(घ) आचरण सांधहता पर सीबीआईपी प्रकाशन;

(ङ) धिधभन्न उपकरणों और रखरखाि प्रथाओं के धलए भारतीय मानक ब्यूरो द्वारा जारी अभ्यास सांधहता; और

(च) सांबांधित मानक उपकरण धनमाषता द्वारा जारी स्थापना, सांचालन और रखरखाि के धलए धनदेश मैनुअल।

4.10.4. कांडक्टर आकार, फ़्यूज आकार, तार गेज, धिद्युत धनकासी, िाउांड िायर आकार, इन्सुलेशन प्रधतरोि और पृ्िी प्रधतरोिी आकद

के धलए मानक ताधलकाओं को धनमाषण और रखरखाि धनयमािली में शाधमल ककया िािा चाज ए।

लाइसेंसधारी को य सुजिजित करिा चाज ए दक उसके जिमािण और रखरखाि कमिचारी इि मैिुअल का सख्ती से पालि करें।

जिमािण एिं रखरखाि जियमािली की प्रजत आयोग को प्रस्ट्तुत की िाएगी।

4.11 धनिारक रखरखाि अनुसूची और धनरीिण मैनुअल

4.11.1. लाइसेंसिारी और उपयोगकताष धितरण प्रणाली में स्थाधपत धिधभन्न लाइन और सब-स्टेशन उपकरणों के धलए एक धनिारक

रखरखाि अनुसूची और धनरीिण मैनुअल तैयार करेंगे।

4.11.2. धनिारक रखरखाि अनुसूची और धनरीिण मैनुअल में धनम्नधलधखत शाधमल होंगे: -

(क) धनरीिण के धलए अनुशांधसत अनुसूची;

(ख) धनिारक रखरखाि के धलए अनुशांधसत अनुसूची; और

(ग) ओिरहासलांग के धलए अनुशांधसत अनुसूची।

4.11.3. धनरीिण कायषक्रम और धनिारक रखरखाि कायषक्रम में धिधभन्न उपकरणों के धलए दैधनक, साप्ताधहक, माधसक, त्रैमाधसक और

िार्र्षक आिधिक गधतधिधि की जाएगी।

20

THE GAZETTE OF INDIA : EXTRAORDINARY

[PART III—SEC.4]

4.12 रखरखाि अजभलेख

4.12.1. उपयोगकताष के रूप में लाइसेंसिारी धनिारक रखरखाि अनुसूची और धनरीिण मैनुअल में धनिाषररत मानक प्रारूपों में ककए

गए आिधिक धनरीिण के ररकॉडष बनाए रखेगा।

4.12.2. िाांसफामषर, धस्िचधगयर, सुरिात्मक ररले इत्याकद जैसे सभी उपकरणों का समय-समय पर धनमाषता द्वारा अनुशांधसत और

भारतीय मानक ब्यूरो और सीबीआईपी द्वारा जारी प्रासांधगक अभ्यास सांधहता के अनुसार परीिण ककया जाना चाधहए। इन्हें

धनधित अांतराल पर दकया िािा चाज ए और परीिण के पररणाम रखरखाि रधजस्टरों में दजष ककए जाएांगे।

ि ां भी परीषम ण के पठरणाम इन्सुलेिि प्रजतरोध में जगराि और/या उपकरण की जगराि का संकेत देते ैं, सेिाषम मता,

सुरषम ा और दषम ता सुजिजित करिे के जलए जििारक रखरखाि दकया िािा चाज ए।

4.12.3. लाइसेंसधारी को अच्छी तर से प्रजिजषम त ॉ -लाइि रखरखाि कर्मियों को अच्छी जस्ट्थजत में सभी आिश्यक उपकरणों के साथ

रखिा चाज ए और रुकाि की अिजध को कम करिे के जलए, ि ां भी संभि ो, ॉ -लाइि तकिीक का उपयोग करके

रखरखाि कायि करिा चाज ए।

4.12.4. उपभोिाओं को अपने उपकरण और धबजली लाइनों को हर समय धिद्युत धनयमों के अनुरूप बनाए रखना होगा, और ये

धितरण प्रणाली से सुरधित और धिश्वसनीय तरीके से कनेक्शन के धलए उपयुि होंगे।

4.13 ऊजाष सांरिण

4.13.1. लाइसेंसधारी, समग्र आिश्यकता को कम करिे के जलए, ऊिाि संरषम ण और मांग पषम प्रबंधि (डीएसएम) को ऊिाि संरषम ण

अजधजियम, 2001 के अिुपालि को सुजिजित करिे के जलए उच्च प्राथजमकता देिी चाज ए और लागू (मांग पषम प्रबंधि)

जिजियमों के प्रािधािों के साथ-साथ ऊिाि दषम ता ब्यूरो के ददिाजिदेिों का पालि करिा चाज ए।

4.13.2. लाइसेंसिारी यह सुधनधित करेगा कक ऊजाष सांरिण अधिधनयम, 2001 के तहत जहाां भी धबजली-गहन उद्योगों के धलए

आिधिक ऊजाष लेखापरीषम ा अधनिायष ककया गया है, उसका उपभोिाओं द्वारा अनुपालन ककया जाए। अन्य औद्योधगक

उपभोिाओं को भी ऊजाष लेखापरीषम ा और ऊजाष सांरिण उपायों को अपनाने के धलए प्रोत्साधहत ककया जा सकता है।

4.13.3. कृधर् िेत्र में लाइसेंसिारी उच्च दिता के धलए इांजीधनयर ककए गए पांप सेट और जल धितरण प्रणाली को बढािा देगा।

औद्योधगक िेत्र में, लाइसेंसिारी ऊजाष सांरिण उपायों के रूप में ऊजाष-कुशल प्रौद्योधगककयों को बढािा देने के धलए कायिा ी

करेगा। कृधर् और औद्योधगक िेत्रों में मोटर और ड्राइि धसस्टम उच्च खपत के प्रमुख स्रोत हैं। लाइसेंसिारी उपभोिाओं को कृधर्

और औद्योधगक िेत्रों में उच्च दिता िाली मोटरों का उपयोग करने के धलए प्रोत्साधहत करेगा। लाइसेंसिारी प्रभािी कदम

उठाएगा ताकक उद्योगों, िाधणधज्यक और घरेलू प्रधतष्ठानों में ऊजाष-कुशल प्रकाश प्रौद्योधगककयों को अपनाया जा सके।

अध्याय - 5 किेजक् जि ी की ितें

5.1 उद्देश्य

जिम्नजलजखत सुजिजित करिे के जलए किेजक् जि ी की ितें प्रदाि की गई ैं:

(क) कनेक्शन के धलए बुधनयादी धनयम सभी एजेंधसयों द्वारा सांकधलत ककए जाते हैं। इससे सभी एजेंधसयों के साथ गैर-भेदभािपूणष

तरीके से व्यिहार करने में मदद धमलेगी।

(ख) कोई भी नया या सांशोधित कनेक्शन, स्थाधपत होने पर, धितरण प्रणाली से जुडे होने के कारण अस्िीकायष प्रभाि नहीं झेलेगा

और न ही प्रणाली या ककसी अन्य जुडी एजेंसी पर अस्िीकायष प्रभाि उत्पन्न करेगा।

(ग) सभी उपकरणों का स्िाधमत्ि और धजम्मेदारी प्रत्येक साइट के धलए एक शेड्यूल (साइट धजम्मेदारी अनुसूची) में स्पष्ट रूप से

धनर्दष्ट की जाएगी, जहाां कनेक्शन बनाया गया है।

(घ) कनेधक्टधिटी शतें न्यूनतम तकनीकी और धडजाइन मानदांड धनर्दष्ट करती हैं, धजनका अनुपालन धितरण प्रणाली से जुडी या

कनेक्शन चाहने िाली ककसी भी एजेंसी को करना होगा। जितरण लाइसेंसधारी दकसी स मत किेक्िि की स्ट्थापिा के

[भागIII—खण् ड 4]

भारत का रािपत्र : असाधारण

21

जलए पूिि-आिश्यकता के रूप में दकसी भी एिेंसी द्वारा उपरोक्त मािदंडों का अिुपालि सुजिजित करेगा। कनेधक्टधिटी

शतों को धबजली अधिधनयम, 2003 की िारा 50 और 53 और सांयुि धिद्युत धिधनयामक आयोग केंद्र िाजसत प्रदेि िम्मू और

कश्मीर ि केंद्र िाजसत प्रदेि लद्दाख (धिद्युत आपूर्तष कोड) धिधनयम, 2023 के प्राििानों में धनिाषररत आिश्यकताओं को पूरा

करना चाधहए।

5.2 पररचालन लेबसलांग

लाइसेंसिारी और उपभोिा सबस्टेशनों और कनेक्शन साइटों पर उपकरण/यंत्र और सर्कषट की सांख्या और/या नाम दशाषने िाले

स्पष्ट, असंददग्ध सांकेतों और लेबल के प्राििान और रखरखाि के धलए धजम्मेदार होंगे। स्थाधपत उपकरण अपने प्रासांधगक आईएस

धिधनदेश की पुधष्ट करेगा और रेट ंग और मुख्य जिजिष्टता को उपकरण की िेमप्ले पर बिाए रखा िािा चाज ए।

दकसी भी जिद्युत उपकरण का उपयोग उसके जिमािता की िेमप्ले को स्ट्थायी रूप से जचपकाए जबिा ि ीं दकया िाएगा। ऐसी

जिसंगजतयां पाए िािे की जस्ट्थजत में, इसे जिद्युत अजधजियम, 2003 की प्रासंजगक धारा के अिुसार मािा िाएगा।

5.3 प्रणाली प्रदशषन

5.3.1 जितरण प्रणाली से िुडे सभी उपकरणों का जडजाइि और जिमािण प्रासंजगक भारतीय मािक जिजिदेिों को पूरा करिा चाज ए।

ऐसे उपकरणों के मामले में धजनके धलए भारतीय मानक धिधनदेश मौजूद नहीं हैं, उपयुि आईईसी, आईईईई या अन्य अांतराष्ट्रीय

मानक लागू होंगे।

5.3.2 सभी जिद्युत उपकरणों की स्ट्थापिा को लागू जियमों और अभ्यास संज ता का पालि करिा चाज ए।

5.3.3 प्रत्येक नए कनेक्शन के धलए, धितरण लाइसेंसिारी इस कोड की िारा - 7 के तहत "मीटटरांग और सुरिा कोड" में धनर्दष्ट

मीटटरांग और सुरिा आिश्यकताओं के साथ-साथ कनेक्शन सबांदु/इांटरफेस सबांदु और आपूर्तष िोलटेज धनर्दष्ट करेगा।

5.3.4 धितरण प्रणाली का सांचालन धिद्युत अधिधनयम 2003 के तहत प्राधिकरण द्वारा धनिाषररत जिद्युत प्रणाली प्रबांिन और सांचालन

मानक के तहत "धितरण प्रणाली सांचालन मानक" के अनुसार होगा। ालााँदक, उपयोगकताि को एसएलडीसी/जितरण

लाइसेंसधारी द्वारा जिधािठरत जितरण अिुिासि के अधीि ोिा चाज ए।

5.3.5 उपयोगकताष के उपकरण का इन्सुलेशन समन्िय लागू भारतीय मानकों/प्रथा सांधहता के अनुरूप ोिा चाज ए। धस्िचधगयर की

टूटने की िमता धितरण लाइसेंसिारी द्वारा अधिसूधचत िमता से कम नहीं ोिा चाज ए।

5.4 किेक्िि बबंदु/इं रफेस बबंदु

5.4.1 पारेषण प्रणाली से किेक्िि, िैसा भी मामला ो, केंद्रीय/राज्य जग्रड कोड के प्रासंजगक खंडों द्वारा िाजसत ोगा।

5.4.2 धितरण प्रणाधलयों से छोटे जेनरेटर (1 मेगािाट से कम नहीं) का कनेक्शन:- जनरेटटांग स्टेशन पर बस बार उपलब्ि कराए जा

सकते हैं। सभी उत्पादन इकाइयााँ ससांक्रोनाइसजांग ब्रेकर के माध्यम से आउटपुट को बस बार में इांजेक्ट करेंगी।

ससांक्रोनाइसजांग ब्रेकर और बस बार के बीच आइसोलेटर जेनरेटर और धितरण लाइसेंसिारी के बीच की सीमा है। मीटटरांग के

धलए ितषमान िाांसफामषर को ससांक्रोनाइसजांग ब्रेकर के पास जोडा जाएगा।

मीटर के िोलटेज िाांसफामषर (स्टैंडबाय सेट सधहत) को बस-बार से जोडा जाएगा। हालााँकक, ऊजाष के निीकरणीय स्रोतों पर

आिाररत छोटे जनरेटरों को धितरण प्रणाली/पारेर्ण प्रणाली के साथ कनेक्शन के धलए अनुमधत दी जाएगी, जैसा सांभि हो और

आयोग द्वारा मामले-दर-मामले के आिार पर तय ककया गया हो।

5.4.3 ईएचटी/एचटी उपभोिा: आपूर्तष िोलटेज 220 केिी, 132 केिी, 66 केिी, 33 केिी, 22 केिी, या 11 केिी या धितरण

लाइसेंसिारी द्वारा सहमधत के अनुसार िोलटेज हो सकता है। सबस्टेशनों का स्िाधमत्ि उपयोगकताषओं के पास होगा। सीमा

उपयोगकतािओं के पठरसर में िीडर प्रजिजष्ट ोगी या िब ऐसा प्रदाि दकया िाएगा तो य जितरण लाइसेंसधारक और

ईएच ी/एच ी उपभोक्ताओं के ब्रेकरों के बीच बस-बार ोगी।

22

THE GAZETTE OF INDIA : EXTRAORDINARY

[PART III—SEC.4]

5.4.4 कम िोलटेज और मध्यम िोलटेज उपभोिा: उपभोिा द्वारा स्थाधपत कट-आउट सर्कषट ब्रेकर का इनकसमांग टर्मषनल लो-

िोलटेज और मध्यम-िोलटेज उपभोिाओं की सीमा है। उपभोिा के फ्यूज यूधनट/सर्कषट ब्रेकर से पहले मीटटरांग प्रदान की

जाएगी। मीटर रीसडांग, रखरखाि, मरम्मत, धनरीक्र्ण आदद के उद्देश्य से आसान पहुांच के धलए मीटटरांग उपकरण उपभोिा

पररसर के प्रिेश सबांदु पर एक सुरधित स्थान पर, अधिमानतः पररसर के प्रिेश द्वार पर या भूतल पर एक सामान्य मागष में प्रदान

दकया िािा चाज ए। मीटटरांग उपकरण धितरण लाइसेंसिारी द्वारा सीलबांद बॉक्स के अांदर प्रदान दकया िािा चाज ए और

उपयोगकताष/उपभोिा सीलबांद मीटटरांग उपकरण को नहीं छुएगा और मीटर और उपकरण की सुरिा के धलए उधचत देखभाल

करेगा।

5.5 प्रणाली से कनेक्शन के धलए आिेदन की प्रकक्रया

जितरण प्रणाली का उपयोग करिे का इच्छुक कोई भी उपयोगकताि संयुक्त जिद्युत जिजियामक आयोग केंद्र िाजसत प्रदेि िम्मू

और कश्मीर ि केंद्र िाजसत प्रदेि लद्दाख (जिद्युत आपूर्ति कोड) जिजियम 2023 के त त जिधािठरत प्रदियाओं और प्रारूपों के

अिुसार लाइसेंसधारी को किेक्िि के जलए आिेदि िमा कर सकता ै। बडे िाहक अनुबांि-1 के अनुसार जानकारी सांलि कर

सकते हैं।

5.6. कनेक्शन के धलए आिेदन की स्िीकृधत या अस्िीकृधत

कनेक्शन आपूर्तष के धलए उपभोिा के आिेदन की स्िीकृधत या अस्िीकृधत जिद्युत जिजियामक आयोग केंद्र िाजसत प्रदेि िम्मू

और कश्मीर ि केंद्र िाजसत प्रदेि लद्दाख (जिद्युत आपूर्ति कोड) जिजियम 2023 के प्राििानों के अनुसार होगी।

5.7 कनेक्शन समझौते

उपभोिा का कनेक्शन समझौता जिद्युत जिजियामक आयोग केंद्र िाजसत प्रदेि िम्मू और कश्मीर ि केंद्र िाजसत प्रदेि लद्दाख

(जिद्युत आपूर्ति कोड) जिजियम 2023 के प्राििानों के अनुसार ोिा चाज ए।

अध्याय - 6: ऑपरेशन कोड

6.1 उद्देश्य

6.1.1 इस अध्याय में जितरण लाइसेंसधारी और उिके जिद्युत संयंत्र और लाइिों के जितरण प्रणाली के उपयोगकतािओं द्वारा जितरण

प्रणाली के सुरजषम त और कुिल संचालि के जलए पालि की िािे िाली प्रदियाएं और प्रथाएं िाजमल ैं िो जितरण लाइसेंसधारी

की प्रणाली से िुडी ैं। इं रफेस के सुरजषम त और कुिल संचालि के जलए य दो जितरण लाइसेंसधाठरयों के बीच दकसी भी

जिद्युत इं रफेस पर भी लागू ोगा।

6.1.2 इस अनुभाग में पररचालन के धनम्नधलधखत पहलुओं को शाधमल ककया गया है:

(क) माांग अनुमान

(ख) आउटेज योजना

(ग) आकधस्मक योजना

(घ) माांग पि प्रबांिन

(ङ) सीपीपी सधहत छोटे उत्पादन सांयांत्र के साथ इांटरफेस

(च) (पररचालन सांचार

(छ) िोलटेज, आिृधत्त और पािर फैक्टर की धनगरानी और धनयांत्रण।

(ि) सुरिा समन्िय।

(झ) रखरखाि और परीिण

(ञ) उपकरण और पुजे

[भागIII—खण् ड 4]

भारत का रािपत्र : असाधारण

23

( ) मानि सांसािन धिकास और प्रधशिण

(ि) भौगोधलक सूचना प्रणाली (जीआईएस)/ग्लोबल पोधजशसनांग धसस्टम (जीपीएस) आिाररत सूचना प्रणाली

6.2 माांग अनुमान

6.2.1 जितरण लाइसेंसधारी अगले ददि/अगले सप्ता / अगले मा के आधार पर तैयार दकए गए प्रासंजगक भार ििों के आधार पर

अपिे आपूर्ति षम ेत्र के जलए रांसजमिि-जडस्ट्रीब्यूिि इं रफेस बबंदुओं पर 15 जमि के समय ब्लॉक में मांग और ऊिाि की

आिश्यकता का अिुमाि लगाएगा िो दकसी जिजिष्ट उपयोगकताि से प्राप्त संचार या दकसी आकजस्ट्मकता के कारण ोिे िाले

संचार के आधार पर संिोधिों के अधीि ोगा। आिश्यकतानुसार इसे एसएलडीसी को कदया जा सकता है।

6.2.2 इस प्रयोजन के धलए, धितरण लाइसेंसिारी द्वारा पहचाने गए सांबांधित प्रमुख उपयोगकताष अपनी स्थापना की माांगों से सांबांधित

आिश्यक डेटा उसे प्रस्तुत करेंगे।

6.3 आउटेज योजना

6.3.1 धितरण लाइसेंसिारी पारेषण लाइसेंसधारी को अपने प्रस्ताधित आउटेज कायषक्रम एक महीने पहले प्रस्तुत करेगा।

6.3.2 आउटेज कायषक्रम में लाइसेंसिारी द्वारा प्रस्ताधित धितरण प्रणाली की लाइनों और उपकरणों की पहचान शाधमल होगी।

6.3.3 लाइसेंसिारी द्वारा प्रस्ताधित आउटेज योजना पारेषण लाइसेंसधारी द्वारा अांधतम रूप से सहमत िाांसधमशन आउटेज योजना

जारी करने के बाद ही प्रभािी होगी।

6.3.4 ालााँदक, जिस समय लाइि या उपकरण को सेिा से बा र दकया िाता ै, जितरण लाइसेंसधारी पारेषण लाइसेंसधारी को

उिके रखरखाि कायि को समायोजित करिे में सुजिधा प्रदाि करिे के जलए सूजचत करेगा, जिसे न्यूितम ि डाउि अिजध के

त त दकया िा सकता ै।

6.3.5 उपरोि प्रकक्रया धनम्नधलधखत पररधस्थधतयों में लागू नहीं होगी:

(क) सांयांत्र और मशीनरी को बचाने के धलए 'आपातकालीन धस्थधतयााँ';

(ख) अप्रत्याधशत आपातकालीन धस्थधतयों के मामले में ि ा मानि जीिन को बचाने के धलए लाइनों या उपकरणों को अलग करने

की आिश्यकता होती है,

(ग) जहाां अनुबांि के उललांघन के कारण ककसी भी उपयोगकताष इांस्टॉलेशन पर धियोग लागू ककया जाना है। इस मामले में, जहाां भी

1 मेगािाट या उससे अधिक की सीमा तक भार प्रभाधित होता है, एसएलडीसी को सूधचत दकया िािा चाज ए।

6.3.6 रखरखाि उद्देश्यों के धलए संयुक्त जिद्युत जिजियामक आयोग केंद्र िाजसत प्रदेि िम्मू और कश्मीर ि केंद्र िाजसत प्रदेि लद्दाख

(जितरण लाइसेंसधाठरयों के जलए प्रदिि के मािक) जिजियम 2023 में धनर्दष्ट अिधि के धलए धबजली प्रणाली की कटौती की

सूचना मीधडया के माध्यम से जनता को दी जाएगी, धजसमें उस िेत्र के कम से कम दो बडे पैमाने पर प्रसाररत समाचार पत्रों

(एक अांिेजी में और एक स्थानीय भार्ा में) में दो कदन पहले प्रकाशन शाधमल है।

6.4 आकधस्मक योजना एिां सांकट प्रबांिन

6.4.1 पारेषण प्रणाली में पूणष या आांधशक ब्लैकआउट की धस्थधत में आकधस्मक धस्थधत उत्पन्न हो सकती है। धितरण प्रणाली में स्थानीय

खराबी के कारण धितरण प्रणाली के एक धहस्से पर आकधस्मकता भी उत्पन्न हो सकती है। यह इांटरकनेक्शन के सबांदु पर पारेषण

लाइसेंसधारी के उपकरण में खराबी के कारण भी उत्पन्न हो सकता है।

6.4.2 आकजस्ट्मक योििा और संक प्रबंधि प्रदिया को कम से कम संभि समय में कुल प्रणाली और संबंजधत मांग की ब ाली और एक

दूसरे के साथ तालमेल से बा र आए कुल प्रणाली के ज स्ट्सों के पुि: बसंििाइजेिि को प्राप्त करिे के जलए स्ट्पष्ट रूप से प्रलेजखत

दकया िािा चाज ए।

24

THE GAZETTE OF INDIA : EXTRAORDINARY

[PART III—SEC.4]

6.4.3 पारेषण प्रणाली धिफलता:

(क) धितरण लाइसेंसिारी के आपूर्तष िेत्र में ककसी भी सबांदु पर पूणष ब्लैकआउट की धस्थधत में, धितरण लाइसेंसिारी को पारेषण

उपयोजगता (एसटीयू)/एसएलडीसी द्वारा तैयार की गई ब्लैक स्टाटष प्रकक्रयाओं का पालन करना होगा।

(ख) धितरण लाइसेंसिारी धितरण प्रणाली को माांग के अलग-अलग ब्लॉकों में धिभाधजत करेगा। लाइसेंसिारी प्रत्येक माांग ब्लॉक

को धस्िच करने पर उठाए जाने िाले मेगािाट भार की मात्रा के धलए एसएलडीसी को सलाह देगा और सहयोग करेगा।

(ग) धितरण लाइसेंसिारी बहाली प्रकक्रया के दौरान उठाए जाने िाले प्रत्येक कनेक्शन पर प्राथधमकता के क्रम में आिश्यक और

गैर-आिश्यक भार की एक अनुसूची तैयार करेगा।

(घ) धितरण लाइसेंसिारी एसएलडीसी के धनदेशन में भार उत्पादन सांतुलन सुधनधित करेगा और बनाए रखेगा।

(ङ) धितरण लाइसेंसिारी एसएलडीसी के साथ सीिा सांचार सांपकष बनाए रखेगा।

(च) जितरण लाइसेंसधारी आकजस्ट्मक कायों से जिप िे के जलए अजधकृत व्यजक्तयों के िाम और पदिाम, उिके ेलीिोि िंबर, ई-

मेल आईडी और स्ट् ेिि एसएलडीसी को प्रस्ट्तुत करेगा िो राज्य/केंद्रीय जग्रड कोड/आयोग के जिजियमों, िैसा भी मामला ो,

के अिुसार ब ाली प्रदिया के जलए समन्िय करेगा।

6.4.4 धितरण प्रणाली धिफलता:

(क) संयुक्त जिद्युत जिजियामक आयोग केंद्र िाजसत प्रदेि िम्मू और कश्मीर ि केंद्र िाजसत प्रदेि लद्दाख (जितरण लाइसेंसधाठरयों

के जलए प्रदिि के मािक) जिजियम 2023 और सांशोिनों में धनर्दष्ट अिधि के धलए धितरण प्रणाली के ककसी भी धहस्से में

खराबी के कारण धितरण प्रणाली के ककसी भी धहस्से में धबजली आपूर्तष में रुकािट को लाइसेंसिारी के धलए इसे धितरण

प्रणाली धिफलता कहा जा सकता है।

(ख) धितरण लाइसेंसिारी बहाली प्रकक्रया के धलए एसएलडीसी के साथ समन्िय करेगा, जो लागू (राज्य धिड कोड) धिधनयमों के

प्राििानों, कायाषन्ियन और सांशोिनों के अनुसार ोिा चाज ए।

(ग) जितरण लाइसेंसधारी जितरण प्रणाली की ब ाली के जलए एसएलडीसी के साथ समन्िय करिे के जलए एक नोडल अधिकारी

नाधमत करेगा।

6.4.5 पारेषण लाइसेंसिारी के उपकरण की धिफलता:

(क) धितरण लाइसेंसिारी तुरांत पारेषण लाइसेंसधारी के सबस्टेशन पर अधिकृत व्यधि से सांपकष करेगा, और बहाली की सांभाधित

अिधि और प्रभाधित सबस्टेशन से भार धनकासी के सांभाधित प्रधतबांि का आकलन करेगा।

(ख) धितरण लाइसेंसिारी तदनुसार माांग प्रबांिन योजना को प्रभाधित करेगा।

6.5 माांग पि प्रबांिन (डीएसएम)

6.5.1 जबिली के उपयोग, पयािरण संरषम ण और लागत में कमी में अंजतम-उपयोग दषम ता में सुधार लािे के उद्देश्य से डीएसएम को

जितरण लाइसेंसधारी के दैजिक कायों का एक अजभन्न अंग बिाया िािा चाज ए।

6.5.2 लोड जिब् ंग, जबिली की कमी को कम करिे, मौसमी चरम क ौती, लागत प्रभािी ऊिाि बचत, जबिली की लागत को कम

करिे, ग्रीि ाउस गैसों के उत्सिि में कमी, और मूल्य जिधािरण प ल यािी, उपयोग का समय / मौसमी इत्यादद को बढािा

देिा और लागू करिा।

6.5.3 उत्पादि, पारेषण और जितरण बुजियादी ढांचे में अिािश्यक जििेि से बचिे, कम करिे या स्ट्थजगत करिे के जलए आपूर्ति-पषम

रणिीजतयों को लागू करिा।

6.5.4 उच्च ए ीएंडसी ाजियों की ठरपो ि करिे िाले षम ेत्रों में अंजतम-उपयोग ऊिाि दषम ता कायिमों के कायािन्ियि के माध्यम से

पारेषण और जितरण ाजियों को कम करिा।

6.5.5 ग्रीि ाउस गैसों के उत्सिि को कम करके पयािरणीय षम जत को कम करिा।

[भागIII—खण् ड 4]

भारत का रािपत्र : असाधारण

25

6.5.6 उपभोक्ताओं को ऊिाि के कुिल उपयोग के जलए जबिली की मांग के समय और स्ट्तर दोिों के संबंध में अपिे जबिली खपत पै िि

को संिोजधत करिे के जलए प्रोत्साज त करिा।

6.5.7 सोलर पंप, सोलर लाइ , एलईडी लैंप आदद के बारे में िागरूकता पैदा करिा।

6.5.8 डीएसएम योििा और कायिम की तैयारी, प्रस्ट्तुतीकरण और आयोग द्वारा अिुमोदि:

(क) धितरण लाइसेंसिारी एक पररप्रेक्ष्य डीएसएम योजना तैयार करेगा और उसे धनर्दष्ट अिधि के धलए और समय-समय पर

आयोग द्वारा धनर्दष्ट समय-सीमा के अनुसार सैद्धाांधतक अनुमोदन के धलए आयोग को प्रस्तुत करेगा;

(ख) पररप्रेक्ष्य डीएसएम योजना में शाधमल होंगे:

(i) धनर्दष्ट अिधि में प्राप्त ककए जाने िाले लक्ष्यों की रूपरेखा बताने िाला एक अनुभाग।

(ii) पररप्रेक्ष्य योजना अिधि के प्रत्येक िर्ष के धलए िार्र्षक डीएसएम योजना धजसमें प्रस्ताधित डीएसएम कायषक्रम का

धििरण और कायषक्रमिार धििरण के साथ इसकी प्राथधमकता शाधमल है:

1. इन धिधनयमों और समय-समय पर आयोग द्वारा जारी ककए गए ककसी भी कदशाधनदेश के अनुसार साांकेधतक लागत और

इसकी लागत प्रभािशीलता;

2. साांकेधतक आिारभूत डेटा और टैररफ में अपेधित कमी और/या ऊजाष दिता में लाभ;

3. उपभोिा िगष और भागीदारी का अनुमाधनत स्तर;

4. कायाषन्ियन रणनीधत और कायषक्रम धजसमें धनष्पादन के धलए प्रकक्रया/तांत्र शाधमल है, उदाहरण के धलए, ऊजाष सेिा कांपधनयाां,

डीएसएम पररयोजनाओं के धलए बोली लगाना, डीएसएम सांसािन अधििहण, आकद;

5. लागत और प्रदशषन प्रोत्साहन की िसूली के धलए अपेधित भुगतान अिधि और तांत्र;

(ग) पररप्रेक्ष्य योजना और िार्र्षक योजना/कायषक्रमों की धनगरानी, मूलयाांकन और ररपोर्टिंग के धलए तांत्र;

(घ) उपभोिा जागरूकता बढाने के धलए प्रधशिण/सेधमनार/कायषशालाओं के धलए कायषक्रम/योजना।

6.6. सीपीपी सधहत छोटी उत्पादन इकाइयों के साथ इांटरफेस

यदद जितरण लाइसेंसधारी का सीपीपी सज त दकसी भी उत्पादि इकाई के साथ इं रिेस ै और इस उद्देश्य के जलए एक

समझौता मौिूद ै, जितरण लाइसेंसधारी और उत्पादि इकाई के संबंजधत माजलक को इस संज ता में जिज त प्रािधािों के

अलािा सभी उपयोगकतािओं पर लागू जिम्नजलजखत प्रािधािों का पालि करिा ोगा:

(क) धितरण प्रणाली में सामान्य और असामान्य धस्थधतयों के कारण अपने प्रणाली को ककसी भी िधत से बचाने के धलए माधलक

इांटरफेस पर उपयुि सुरिा प्रदान करेगा।

(ख) इांडक्शन जनरेटर के मामले में, जब धितरण लाइसेंसिारी की सहमधत से इांडक्शन जनरेटर को ससांक्रोनाइज ककया जाता है, तो

माधलक को प्रणाली की गडबडी को सीधमत करने के धलए पयाषप्त साििानी बरतनी होगी। प्रधतकक्रयाशील धबजली धनकासी की

भरपाई के धलए पयाषप्त कैपेधसटर के साथ इांडक्शन जनरेटर स्थाधपत ककए जाएांगे। इसके अलािा, जब भी शुरुआती अिधि के

दौरान पािर फैक्टर बहुत कम पाया जाता है और लाइसेंसिारी के प्रणाली में िोलटेज में कमी आती है, तो लाइसेंसिारी

माधलक को कैपेधसटर स्थाधपत करने की सलाह दे सकता है और माधलक इसका अनुपालन करेगा। जियमों और अजधजियमों के

प्रािधािों के अिुसार अिुपालि में जििलता पर िुमािा ो सकता और/या प्रणाली से किेक्िि का ा िा सकता ै:

(ग) माधलक, जैसा भी मामला हो, आयोग के (राज्य/केंद्रीय) धिड कोड धिधनयमों के प्राििानों का अनुपालन करेगा।

6.7 पररचालन सांचार

लाइसेंसधारी, 1 मेगािा और उससे अजधक की मांग िाले उपभोक्ता और एसएलडीसी के बीच डे ा, सूचिा और पठरचालि

जिदेिों के आदाि-प्रदाि के जलए जिश्वसिीय संचार बलंक िैसे ेलीिोि, ईमेल, िैक्स, ेली बप्रं र आदद स्ट्थाजपत दकए िािे

चाज ए। प्रत्येक घ क को अपिे स्ट्तर पर उजचत संचार बुजियादी ढांचे की स्ट्थापिा और रखरखाि सुजिजित करिा चाज ए।

26

THE GAZETTE OF INDIA : EXTRAORDINARY

[PART III—SEC.4]

6.8 िोलटेज, फ्रीक्वेंसी और पािर फैक्टर की धनगरानी और धनयांत्रण

6.8.1 जितरण लाइसेंसधारी को जितरण प्रणाली में चरम और गैर चरम घं ों में जिजभन्न बबंदुओं पर िोल् ेि, आिृजत्त और जबिली

कारकों की जिगरािी करिी चाज ए और 1 मेगािा और उससे अजधक की मांग िाले उपयोगकतािओं और पारेषण

लाइसेंसधारी के साथ समन्िय करके इसमें सुधार के जलए उजचत उपाय करिे चाज ए।

6.8.2 धितरण लाइसेंसिारी प्रणाली अध्ययन करके और आिश्यक प्रधतकक्रयाशील िधतपूर्तष उपकरण स्थाधपत करके धितरण प्रणाली

में रणनीधतक सबांदुओं पर पािर फैक्टर सुिार के उपाय करेगा।

6.8.3 जितरण प्रणाली में िोल् ेि दकसी भी समय उपलब्ध उत्पादि, प्रणाली की मांग और रांसजमिि और जितरण प्रणाली के

कॉजन्फगरेिि के आधार पर जभन्न ो सकता ै। सामान्य पठरचालि जस्ट्थजतयों के त त लाइसेंसधारी जितरण प्रणाली योििा

और सुरषम ा मािक में उजल्लजखत आपूर्ति की गुणित्ता के अिुसार सभी स्ट्तरों पर िोल् ेि बिाए रखिे के जलए रांसजमिि

प्रणाली के साथ किेक्िि के बबंदु से परे जितरण प्रणाली में उजचत िोल् ेि प्रबंधि करेगा, िैसा दक इस कोड के अध्याय 4 के

त त उजल्लजखत ै। जहाां भी धिड सबस्टेशनों में कैपेधसटर उपलब्ि हैं, बस िोलटेज को ध्यान में रखते हुए कम से कम 0.9 के

पािर फैक्टर की स्िीकायष सीमा के भीतर प्रधतकक्रयाशील मुआिजे को बनाए रखने के धलए सांचाधलत दकया िािा चाज ए।

6.8.4 जिि उपयोगकतािओं के पास उच्च ामोजिक सामग्री, कम पािर िैक् र और उतार-चढाि िाले लोड ैं, उन् ें उजचत सुधार

उपकरण स्ट्थाजपत करिा चाज ए।

6.8.5 जितरण लाइसेंसधारी को जिर्दिष्ट सीमा के भीतर आपूर्ति की आिृजत्त बिाए रखिे के जलए लोड प्रबंधि पर समय-समय पर

एसएलडीसी द्वारा िारी जिदेिों का पालि करिा चाज ए।

6.9 सुरिा समन्िय

6.9.1 जितरण लाइसेंसधारी और उपयोगकताि तथा लाइसेंसधारी के साथ एक सामान्य जिद्युत इं रफेस रखिे िाला कोई भी अन्य

जितरण लाइसेंसधारी, सुरषम ा समन्िय के जलए जिम्मेदार ोिे के जलए उपयुक्त व्यजक्तयों को िाजमत करेगा। इन व्यधियों को

धनयांत्रण व्यधि कहा जाएगा। सभी सांबांधित व्यधियों के बीच उनके पदनाम और टेलीफोन नांबरों का आदान-प्रदान दकया िािा

चाज ए। सूची में ककसी भी पररितषन के बारे में सभी सांबांधितों को तुरांत सूधचत दकया िािा चाज ए।

6.9.2 धितरण लाइसेंसिारी और ऐसे उपयोगकताष धितरण प्रणाली के प्रत्येक घटक के धलए बरती जाने िाली सभी सुरिा साििाधनयों

को शाधमल करते हुए सुरिा मैनुअल तैयार करेंगे। धितरण प्रणाली के ककसी भी धहस्से में या उपयोगकताष प्रणाली के ककसी भी

धहस्से में ककसी लाइन या उपकरण, धस्िचधगयर या सर्कषट पर काम करते समय सभी सुरिा धनयमों और साििाधनयों का पालन

दकया िािा चाज ए। इस प्रकार तैयार ककए गए सुरिा मैनुअल अनुपालन के धलए सभी धनयांत्रण व्यधियों और ऐसे

उपयोगकताषओं को जारी ककए जाएांगे।

6.9.3 यहाां धितरण लाइसेंसिारी के व्यधियों और उपयोगकताषओं के बीच, धिद्युत इांटरफेस िाले दो धितरण लाइसेंसिाररयों के

व्यधियों के बीच, इांटरकनेक्शन के सबांदु पर ककसी भी पि से सांबांधित ककसी भी उपकरण या लाइनों आकद पर काम करने के

धलए समन्िय ोिा चाज ए।

6.9.4 पारेषण लाइसेंसधारी के समन्िय से कनेक्शन सबांदुओं/इांटरफेस सबांदुओं पर (राज्य/केंद्रीय) धिड कोड धिधनयमन (जैसा भी मामला

हो) के प्राििानों का पालन दकया िािा चाज ए।

6.9.5 प्रत्येक जिद्युत इं रफेस पर जडस्ट्किेबक् ंग जडिाइस, िो जितरण लाइसेंसधारी और अन्य उपयोगकतािओं के प्रणाली को प्रभािी ढंग

से जडस्ट्किेक् करिे में सषम म ोिा चाज ए, और जियंत्रण सीमा पर संबंजधत प्रणाली के ग्राउंबडंग उपकरणों को लाइसेंसधारी और

संबंजधत उपयोगकतािओं द्वारा प चािा और जचजनित दकया िािा चाज ए। इन् ें र समय अच्छी जस्ट्थजत में बिाए रखा िािा

चाज ए। अनधिकृत व्यधियों द्वारा अनजाने धस्िसचांग सांचालन को रोकने के धलए, ऐसे धडस्कनेसक्टांग उपकरणों को इांटरलॉक

प्रदान दकया िािा चाज ए।

6.9.6 ि ां भी दकसी उपभोक्ता िे आपातकालीि जबिली आपूर्ति प्रणाली स्ट्थाजपत की ै, या तो भंडारण बै री या ििरे र के साथ

एक इलेक्रॉजिक प्रणाली, व्यिस्ट्था ऐसी ोिी चाज ए दक प्रणाली को आपूर्ति मेन से स्ट्पष्ट रूप से अलग दकए जबिा संचाजलत

[भागIII—खण् ड 4]

भारत का रािपत्र : असाधारण

27

ि ीं दकया िा सके। आपूर्तष मेन से अलगाि के धलए आिश्यक व्यिस्था करने की धजम्मेदारी उपयोगकताष की होगी और यह

धिद्युत धनरीिक को उनकी मांजूरी के धलए प्रस्तुत धिद्युत लेआउट का धहस्सा होगा। इन उपकरणों से तटस्थ कांडक्टर सधहत ककसी

भी कांडक्टर से धितरण प्रणाली को फीडबैक की सांभािना को स्पष्ट रूप से खाररज कर कदया जाएगा।

6.9.7 धिद्युत इांटरफेस पर उपयुि धनयांत्रण व्यधि धिद्युत इांटरफेस से परे ककसी भी उपकरण, धस्िचधगयर या लाइनों पर काम करने के

धलए अपने समकि को धलधखत अनुमधत जारी करेगा। ऐसी अनुमधतयों को "कायष करने की अनुमधत" (पीटीडब्लयू) कहा जाएगा।

पीटीडब्लयू का प्रारूप धितरण लाइसेंसिारी द्वारा मानकीकृत दकया िािा चाज ए और सभी सांबांधितों द्वारा इसका उपयोग

दकया िािा चाज ए।

6.9.8 धितरण लाइसेंसिारी सांबांधित उपयोगकताष के परामशष से पीटीडब्लयू जारी करने और िापस करने से पहले, ककए जाने िाले

सांचालन की चेकधलस्ट और प्रत्येक धिद्युत इांटरफेस के धलए सुरिा समन्िय की प्रकक्रयाएां तैयार करेगा। कायािन्ियि के जलए

लाइसेंसधारी द्वारा सभी संबंजधतों को ऐसी प्रदियाएं और चेकजलस्ट् िारी की िाएंगी।

6.10 रखरखाि एिां परीिण

6.10.1 धितरण लाइसेंसिारी "जिद्युत प्रणाली प्रबांिन और पररचालन मानक के तहत धितरण प्रणाली" और "जिद्युत प्रणाली सुरिा

मानक के तहत धितरण प्रणाली" में आिश्यक रखरखाि के स्तर को पूरा करने के धलए लाइनों और उपकरणों के धलए रखरखाि

कायषक्रम तैयार करेगा।

6.10.2 सभी उपकरणों, िैसे रांसिामिर, जस्ट्िचजगयर, सुरषम ात्मक ठरले इत्यादद का जियजमत परीषम ण जिमािताओं द्वारा अिुिंजसत और

भारतीय मािक ब्यूरो और सीबीआईपी द्वारा िारी प्रासंजगक प्रथाओं के कोड के अिुसार दकया िािा चाज ए। इन्हें धनिाषररत

अांतराल पर दकया िािा चाज ए और परीिण के पररणाम रखरखाि रधजस्टरों में दजष ककए िािे चाज ए। जहाां भी परीिण के

पररणाम इन्सुलेशन प्रधतरोि में धगरािट और/या उपकरण की धगरािट का सांकेत देते हैं, सेिािमता, सुरिा और दिता

सुधनधित करने के धलए धनिारक रखरखाि दकया िािा चाज ए।

6.10.3 धितरण लाइसेंसिारी अच्छी तरह से प्रधशधित हॉट-लाइन कर्मषयों और सभी आिश्यक उपकरणों को अच्छी धस्थधत में बनाए

रखेगा, और रुकािट की अिधि को कम करने के धलए, जहाां भी सांभि हो, हॉट-लाइन तकनीक का उपयोग करके रखरखाि कायष

करेगा।

6.10.4 उपयोगकतािओं को र समय अपिे उपकरण और जबिली लाइिों को आईई जियम 1956 के अिुरूप बिाए रखिा ोगा िो

उस समय लागु ोंगे और जबिली अजधजियम, 2003 के त त बिाए गए िए जियमों द्वारा प्रजतस्ट्थाजपत दकए िाएंगे और ि

जितरण प्रणाली से सुरजषम त और जिश्वसिीय तरीके से िुडे र िे के जलए उपयुक्त ोिा चाज ए।

6.11 उपकरण और पुजे

6.11.1 धितरण लाइसेंसिारी रखरखाि करने के धलए कायषस्थलों पर उधचत उपकरणों और पुिों की उपलब्िता सुधनधित करेगा।

उपकरण और ैकल की समय-समय पर िांच की िािी चाज ए और उिकी सेिाषम मता सुजिजित की िािी चाज ए।

6.11.2 धितरण लाइसेंसिारी, लाइसेंसिारी द्वारा धनिाषररत की जाने िाली स्पष्ट नीधत के अनुसार उपयुि स्थानों पर रखरखाि और

प्रधतस्थापन उद्देश्यों के धलए आिश्यक पुजों की एक सूची बनाए रखेगा।

6.12 मानि सांसािन धिकास एिां प्रधशिण

धितरण लाइसेंसिारी धितरण प्रणाली धडजाइन, धनमाषण और रखरखाि, सुरिा, उपभोिा सेिाओं आकद की निीनतम तकनीकों

को शाधमल करते हुए श्रधमकों और पयषिेिी कमषचाररयों को प्रधशिण देने के धलए उधचत व्यिस्था करेगा। लाइसेंसिारी इस

उद्देश्य के धलए एक उपयुि पाठ्यक्रम तैयार करेगा।

6.13 भौगोधलक सूचना प्रणाली (जीआईएस)/ग्लोबल पोधजशसनांग धसस्टम (जीपीएस) आिाररत सूचना प्रणाली

6.13.1 जितरण लाइसेंसधारी, जितरण प्रणाली के संचालि और रखरखाि की योििा बिािे के जलए चरणों में, िीआईएस/िीपीएस

आधाठरत भौगोजलक सुजिधा सूचिा प्रणाली तैिात करेगा। जीआईएस का उपयोग धितरण प्रणाली के सभी महत्िपूणष तत्िों की

28

THE GAZETTE OF INDIA : EXTRAORDINARY

[PART III—SEC.4]

मैसपांग के धलए दकया िािा चाज ए धजसमें लाइनें, िाांसफामषर, सब-स्टेशन, उत्पादन स्टेशन, सभी इकाई स्थान शाधमल हैं और

अांततः सभी उपभोिाओं को शाधमल दकया िािा चाज ए। जीआईएस को सकक्रय ररलेशनल डेटाबेस प्रबांिन प्रणाली

(आरडीबीएमएस) से जोडा जाएगा और समय तुल्यकालि के धलए जीपीएस का उपयोग दकया िािा चाज ए।

6.13.2 धितरण नेटिकष के धडधजटल मानधचत्र धनम्नधलधखत में से प्रत्येक के धलए अधिमानतः जीपीएस सिेिण आयोधजत करके

धिकधसत ककए जाएांगे जो आसान, तेज, सटीक और ककफायती है:

(क) संपूणि जितरण प्रणाली का 33 केिी िे िकि िो दूरी, कंडक् र का प्रकार और आकार / बसंगल लाइि डायग्राम (एसएलडी) के

साथ लाइिों और उप-स्ट् ेिि जििरणों के जलए बसंगल कोर या 3 कोर के साथ भूजमगत (यूिी) केबल का आकार दिािता ै।

(ख) फीडर-िार 11 केिी लाइनें/केबल, कांडक्टर/ भूजमगत केबल की दूरी, प्रकार और आकार, धितरण िाांसफामषर के स्थान और

िमता को दशाषते हैं।

(ग) कई उपभोिाओं के साथ धितरण िाांसफामषर-िार एलटी लाइन/केबल और प्रत्येक एलटी सपोटष/एलटी फीडर धपलर बॉक्स का

कनेक्टेड लोड।

अध्याय - 7 मीटटरांग और सुरिा कोड

7.1 उद्देश्य

यह अध्याय पररचालन मीटटरांग के साथ-साथ टैररफ और िाधणधज्यक मीटटरांग के सांबांि में धितरण प्रणाली में मीटटरांग की

प्रकक्रया को धनर्दष्ट करता है। यह अनुभाग धितरण प्रणाली की सुरिा के धलए सामान्य कदशाधनदेश भी धनर्दष्ट करता है। बिते

दक लाइसेंसधारी सीईए (मी रों की स्ट्थापिा और संचालि) जिजियम 2006 और उसके संिोधिों का पालि करेगा।

7.2 ऑपरेशनल मीटटरांग

धितरण प्रणाली सबस्टेशनों पर पररचालन मीटटरांग की न्यूनतम आिश्यकता इस प्रकार होगी:

(क) धिड सबस्टेशन

66/33 केिी बस िोलटेज

33/22/11 केिी बस िोलटेज

प्रत्येक चरण और प्रत्येक सर्कि में 66/33/22/11 केिी इिकबमंग/आउ गोइंग करं ।

प्रत्येक रांसिामिर के प्रत्येक चरण में पािर रांसिामिर की प्राथजमक और माध्यजमक धाराएाँ।

प्रत्येक िीडर के जलए प्रत्येक चरण में एच ी आउ गोइंग िीडर करं ।

प्रत्येक एच ी िीडर में पािर िैक् र।

सभी इिकबमंग और आउ गोइंग िीडरों के जलए कम से कम 45 ददिों की मेमोरी अिजध िाले भार सिेषम ण मी र।

पारेषण लाइसेंसधारी के साथ किेक्िि बबंदु पर 15 जमि के अंतराल पर एमडब्ल्यूएच और आिृजत्त में ऊिाि ठरकॉडि

करिे की सुजिधा।

(ख) 1 मेगािाट और उससे अधिक की माांग िाली उपयोगकताष की प्रणाली

िोल् ेि

जबिली

भार

ऊिाि घ क

ऊिाि

[भागIII—खण् ड 4]

भारत का रािपत्र : असाधारण

29

7.3 टैररफ और िाधणधज्यक मीटटरांग

7.3.1 केंद्रीय/राज्य धिड कोड और उसके पारेषण सेिा समझौते के अनुसार धितरण और पारेषण प्रणाली के बीच अांतरसांबांि के प्रत्येक

सबांदु पर टैररफ मीटटरांग प्रदान की जाएगी।

7.3.2 टैररफ मीटटरांग उपयोगकताष की प्रणाली और धितरण प्रणाली के बीच कनेक्शन सबांदुओं/इांटरफेस सबांदुओं पर प्रदान की जाएगी

और धितरण सेिा अनुबांि में प्राििान द्वारा शाधसत होगी।

7.3.3 सभी मीटर, उपकरण िाांसफामषर (सीटी/पीटी), मीटटरांग क्यूधबकल और परीिण प्रकक्रयाएां प्रासांधगक भारतीय मानक धिधशष्टता

और धिद्युत अधिधनयम, 2003 के तहत ककए गए प्रासांधगक प्राििानों के अनुरूप होंगी।

7.3.4 उपभोक्ताओं को आपूर्ति की िािे िाली ऊिाि की मी टरंग के जलए तैिात सी ी/पी ी िगष 0.2 स ीकता की ोिी चाज ए।

ालााँदक, सेिा में उपकरण रांसिामिर की रेट ंग के मामले में, िो िगष 0.5 के ैं, उिका उपयोग िारी रखा िा सकता ै। इन् ें

प्रासंजगक आईईसी या आईएस जिजिदेिों के अिुरूप भी ोिा चाज ए।

जििलता पर, िगष 0.5 स ीकता (िैसा दक उिकी सूची में उपलब्ध ै) के सी ी/पी ी समाप्त ोिे के बाद उसे िगष 0.2

स ीकता के उपयुक्त सी ी/पी ी से बदल ददया िाएगा। य िांछिीय ै दक जितरण लाइसेंसधारी िगष 0.2 स ीकता की िई

सी ी/पी ी खरीदेगा।

7.3.5 ओपि एक्सेस उपभोक्ता, उत्पादि कंपिी, जितरण लाइसेंसधारी और व्यापाठरयों को मी र प्रदाि करिा चाज ए, िैसा दक

िोल् ेि, बबंदु और आपूर्ति की अिजध और ैठरि श्रेणी के आधार पर आयोग द्वारा जिर्दिष्ट दकया िा सकता ै, िैसा दक लागू

(राज्य जग्रड कोड) जिजियमों में भी िाजमल ै।

7.4 ऊजाष आयात/धनयाषत का मापन

7.4.1 जितरण लाइसेंसधाठरयों को प्रत्येक किेक्िि बबंदु/इं रफेस बबंदु से ऊिाि आयात/जियाित, उत्पादि इकाइयों में उत्पन्न ऊिाि और

जबिली स्ट् ेििों और सबस्ट् ेिि में खपत ऊिाि की माप के जलए उत्पादि स्ट् ेििों और सबस्ट् ेििों को िोडिे िाली अपिी सभी

उप-पारेषण लाइिों के जलए जिम्नजलजखत मी र स्ट्थाजपत करिे चाज ए:

(क) सकक्रय ऊजाष आयात।

(ख) सकक्रय ऊजाष धनयाषत।

(ग) प्रधतकक्रयाशील ऊजाष आयात।

(घ) प्रधतकक्रयाशील ऊजाष धनयाषत।

उत्पादि कंपजियों, रांसजमिि लाइसेंसधाठरयों और जितरण लाइसेंसधाठरयों के बीच जियाित या आयाजतत ऊिाि के जिधािरण

से िुडे प्रत्येक मी टरंग बबंदु को मुख्य और चेक मी र दोिों प्रदाि दकए िािे चाज ए। इि मी रों की स ीकता का न्यूितम

मािक स ीकता िगष 0.2 का ोगा। ये मी र प्रासंजगक आईईसी या आईएस जिजिदेिों के अिुरूप ोिे चाज ए।

7.4.2 िाधणधज्यक (टैररफ) मीटटरांग के सांयोजन में उपयोग ककए जाने िाले सभी उपकरण िाांसफामषर भी सटीकता िगष 0.2 के ोिे

चाज ए और प्रासांधगक आईईसी या आईएस धिधनदेशों के अनुरूप ोिे चाज ए। रेट ंग लीड तारों और मी टरंग के बोझ को पूरा

करिे के जलए उपयुक्त ोिी चाज ए।

हालााँकक, सेिा में उपकरण िाांसफामषर की रेटटांग के मामले में, जो िगष 0.5 के हैं, धजनका उपयोग जारी रखा जा सकता है। ये

प्रासांधगक आईईसी या आईएस धिधनदेशों के अनुरूप भी ोिे चाज ए। धिफलता पर, 0.5 िगष सटीकता (जैसा कक उनकी सूची में

उपलब्ि है) के सीटी/पीटी समाप्त होने के बाद 0.2 िगष सटीकता के उपयुि सीटी/पीटी द्वारा प्रधतस्थाधपत दकया िािा चाज ए।

यह िाांछनीय है कक धितरण लाइसेंसिारी 0.2 िगष सटीकता की नई सीटी/पीटी खरीदेगा।

7.4.3 डेटा सांिह का उपयोग समझौते के अनुसार प्रत्येक एकीकरण अिधि में मीटर से आिेगों को एकीकृत करने, मूलयों को सांिहीत

करने और धितरण लाइसेंसिारी के डेटा सांिह प्रणाली में सांचाररत करने के धलए दकया िािा चाज ए। डे ा मुख्य और चेक

मी टरंग दोिों योििाओं से एकत्र दकया िािा चाज ए।

30

THE GAZETTE OF INDIA : EXTRAORDINARY

[PART III—SEC.4]

7.4.4 मीटर को िोलटेज आपूर्तष के एक या अधिक चरणों के नुकसान पर अलामष शुरू करने के धलए िोलटेज धिफलता ररले प्रदान की

जाएगी।

7.4.5 सभी कनेक्शन सबांदुओं/इांटरफेस सबांदुओं पर मुख्य और चेक मीटर उपलब्ि कराए िािे चाज ए। सभी मी रों का िषि में कम से कम

एक बार प्रासंजगक आईईसी/आईएस जिजिदेिों में ददए गए ददिाजिदेिों के अिुसार परीषम ण और अंिांकि दकया िािा चाज ए

और तब भी िब मुख्य और चेक मी रों के बीच रीबडंग में अंतर 0.5% से अजधक ो।

7.4.6 इन अांशाांकनों और परीिणों के ररकॉडष सांदभष के धलए बनाए रखे जाएांगे।

7.4.7 उत्पादन कांपधनयाां, पारेषण लाइसेंसिारी और धितरण लाइसेंसिारी अपने िेत्र के धिधभन्न इांटरकनेक्शन स्थलों पर टैररफ मीटर

रीसडांग के योग, सांिह और प्रसांस्करण को किर करने िाली एक प्रकक्रया तैयार करेंगे और उस पर सहमत होंगे। जब भी आिश्यक

हो, इन प्रकक्रयाओं को सांशोधित ककया जा सकता है।

7.4.8 इन मीटरों का स्िाधमत्ि, रखरखाि और परीिण की धजम्मेदारी उपयोगकताषओं और सांबांधित लाइसेंसिाररयों के बीच

पारस्पररक रूप से सहमधत के अनुसार होगी।

7.4.9 'मीटर' शब्द में करांट िाांसफामषर, िोलटेज/सांभाधित िाांसफामषर, उनके बीच की िायटरांग और मीटर बॉक्स/पैनल शाधमल होंगे।

7.5 सुरिा प्रणाली

7.5.1 धिद्युत उपकरण की ककसी भी िस्तु को प्रणाली से जुडे रहने की अनुमधत नहीं दी जाएगी जब तक कक यह धिश्वसनीयता,

चयनात्मकता, गधत और सांिेदनशीलता के उद्देश्य से उधचत सुरिा से किर न हो। धितरण लाइसेंसिारी, पारेषण लाइसेंसिारी

द्वारा धनर्दष्ट समय लक्ष्य धनकासी के भीतर दोर्पूणष लाइन/उपकरण के प्रभािी, भेदभािपूणष अलगाि को प्राप्त करने के धलए

सुरिा की सही और उधचत सेटटांग्स सुधनधित करने के धलए पारेषण लाइसेंसिारी के साथ सहयोग करेंगे।

7.5.2 सभी प्रभाधित उपयोगकताषओं के परामशष और सहमधत के धबना सुरिा सेटटांग्स में बदलाि नहीं दकया िािा चाज ए, या सुरिा

को दरककनार नहीं दकया िािा चाज ए और/या धडस्कनेक्ट नहीं दकया िािा चाज ए। यकद ककसी भी कारण से समझौते द्वारा

सुरिा को दरककनार कर कदया गया है और/या काट कदया गया है, तो उसे ठीक ककया जाना चाधहए और धजतनी जलदी हो सके

सुरिा को सामान्य धस्थधत में बहाल ककया जाना चाधहए। यकद सहमधत नहीं बनी है, तो धिद्युत उपकरण को तुरांत अलग कर

देिा चाज ए।

7.5.3 33 केिी, 22 केिी और 11 केिी लाइनों के धलए सुरिात्मक ररले की सेटटांग्स ऐसी होंगी कक ककसी भी खांड में खराबी सभी

पररधस्थधतयों में उत्पादन इकाई और दोर्पूणष खांड के बीच के खांड को प्रभाधित नहीं करेगी। पारेषण लाइसेंसिारी समय-समय

पर उपयोगकताषओं को प्रारांधभक सेटटांग्स और ककसी भी बाद के बदलाि के बारे में सूधचत करेगा। सुरिात्मक ररले के प्रदशषन पर

धनयधमत जाांच की जाएगी िािी चाज ए और ककसी भी खराबी को नोट दकया िािा चाज ए और जलद से जलद ठीक दकया िािा

चाज ए। ररले सेटटांग्स तय करने के धलए आिश्यक शॉटष सर्कषट अध्ययन लाइसेंसिारी द्वारा पारेषण लाइसेंसिारी और

उपयोगकताषओं से एकत्र ककए गए डेटा के साथ आयोधजत दकया िािा चाज ए।

उत्पादि कंपजियों, रांसजमिि लाइसेंसधाठरयों और जितरण लाइसेंसधाठरयों के प्रजतजिजध ऐसी खराबी, जसस्ट् म

कॉजन्फगरेिि में पठरिति, यदद कोई ो, और ठरले की संभाजित संिोजधत सेट ंग्स पर चचाि करिे के जलए समय-समय पर

जमलेंगे।

7.5.4 पारेषण लाइसेंसिारी सुरिा के समन्िय पर चचाष करने के धलए उत्पादन कांपधनयों और धितरण लाइसेंसिाररयों के बीच

आिधिक बैठकों की व्यिस्था करने के धलए धजम्मेदार होगा। पारेषण लाइसेंसिारी सुरिा में ककसी भी खराबी या अन्य

असांतोर्जनक सुरिा मुद्दों की जाांच करेगा। इन आिधिक बैठकों में चचाष और सहमधत के अनुसार सांबांधित लाइसेंसिारी ककसी

भी सुरिा खराबी या अन्य असांतोर्जनक सुरिा मुद्दे को ठीक करने के धलए त्िररत कायिा ी करेंगे।

[भागIII—खण् ड 4]

भारत का रािपत्र : असाधारण

31

7.5.5 धितरण प्रणाली से जुडी जनरेटटांग कांपनी की सभी उत्पादन इकाइयों और सभी सांबांधित धिद्युत उपकरणों को सीबीआईपी

मैनुअल के अनुसार पयाषप्त सुरिा द्वारा सांरधित दकया िािा चाज ए, ताकक उत्पादन इकाई में उत्पन्न होने िाली ककसी भी

गडबडी के कारण प्रणाली को नुकसान न हो।

7.5.6 धितरण प्रणाली: - धितरण प्रणाली में एचिी िगष के पािर िाांसफामषर के धलए, समानाांतर सांचालन के धलए कदशात्मक सुधििा के

साथ करांट और अथष फॉलट सुरिा पर बैकअप टाइम लैग के साथ 10 एमिीए और उससे अधिक के धलए अांतर सुरिा प्रदान की

जाएगी। 1 एमिीए और उससे अधिक लेककन 10 एमिीए से कम के िाांसफामषर को करांट और अथष फालट के कारण समय

अांतराल से बचाया जाएगा। इसके अलािा, सभी धबजली िाांसफामषरों को गैस सांचाधलत ररले, िाइांसडांग और तेल तापमान अलामष

और सुरिा प्रदान की जाएगी।

7.5.7 धितरण लाइनें: - कनेक्शन सबांदुओं/इांटरफेस सबांदुओं पर सभी 33 केिी, 22 केिी और 11 केिी लाइनों को न्यूनतम ओिर करांट

और अथष फॉलट ररले के साथ धनम्नानुसार प्रदान दकया िािा चाज ए:

(क) सादा रेधडयल फीडर: आसन्न ररले सेटटांग्स के बीच भेदभाि प्राप्त करने के धलए उपयुि सेटटांग्स के साथ ितषमान और अथष फॉलट

ररले पर गैर-कदशात्मक समय अांतराल।

(ख) समानाांतर/टरांग फीडर: करांट और अथष फॉलट ररले पर कदशात्मक समय अांतराल।

7.6 अधि सुरिा

सभी पयाषप्त साििाधनयाां बरती जाएांगी और समय-समय पर सांशोधित अन्य प्रासांधगक धनयमों के तहत प्रासांधगक भारतीय मानक

धिधनदेशों और/या प्राििानों के अनुरूप प्रणाली में सभी उपकरणों को आग के खतरों से सुरिा प्रदान की जाएगी।

अध्याय - 8 सीमा पार सुरिा सांधहता

8.1 उद्देश्य

8.1.1 इस अनुभाग का उद्देश्य धितरण लाइसेंसिारी और उपयोगकताषओं के बीच धनयांत्रण सीमा के पार काम करते समय सुरिा के

धसद्धाांतों पर एक समझौता प्राप्त करना है।

8.1.2 यह अध्याय सीमा पार सांचालन से जुडे उपकरणों के रखरखाि के धलए सुरधित कायष प्रथाओं की आिश्यकताओं को धनर्दष्ट करता

है और ककसी अन्य उपयोगकताष के प्रणाली से जुडे धिद्युत उपकरणों पर काम करते समय पालन की जाने िाली प्रकक्रया को

धनिाषररत करता है।

8.1.3 उपयोगकताष का मतलब ककसी अन्य लाइसेंसिारी से हो सकता है ताकक यह कोड उपयोगकताष के धलए "अन्य लाइसेंसिारी" को

प्रधतस्थाधपत करके, दो लाइसेंसिाररयों के बीच की सीमा पर भी सुरिा के धलए लागू हो।

8.2 व्यधियों और उनकी धजम्मेदारी को धनयांधत्रत करें

टीधितरण लाइसेंसिारी और सभी उपयोगकताष (धजसमें उत्पादन कांपधनयाां, पारेषण लाइसेंसिारी और 1 मेगािाट या समर्पषत

लाइन से ऊपर भार िाले उपभोिा शाधमल हैं) अपनी सीमा में सुरिा के समन्िय के धलए धजम्मेदार होने के धलए उपयुि रूप

से अधिकृत और तकनीकी रूप से योग्य व्यधियों को नाधमत करेंगे। इन व्यधियों को "धनयांत्रण व्यधि" कहा जाएगा।

8.3 प्रकक्रया

8.3.1 धितरण लाइसेंसिारी अपने साथ सीिे धनयांत्रण सीमा िाले सभी उपयोगकताषओं को उनके नाम, पदनाम, पते, टेलीफोन नांबर

और ईमेल आईडी के साथ धनयांत्रण व्यधियों की एक सूची जारी करेगा। जब भी धनयांत्रण व्यधि या सूची में साझा ककए गए

धििरण में कोई बदलाि होगा तो यह सूची तुरांत अपडेट की जाएगी।

32

THE GAZETTE OF INDIA : EXTRAORDINARY

[PART III—SEC.4]

8.3.2 8.3.1 में उधललधखत सभी उपयोगकताष धजनकी धितरण लाइसेंसिारी के साथ सीिी धनयांत्रण सीमा है, िे लाइसेंसिारी को अपने

धनयांत्रण व्यधियों की एक समान सूची जारी करेंगे। जब भी धनयांत्रण व्यधि या सूची में साझा ककए गए धििरण में कोई बदलाि

होगा तो यह सूची तुरांत अद्यति की जाएगी।

8.3.3 िब भी सीमा पार कोई कायि उपयोगकताि या जितरण लाइसेंसधारी द्वारा दकया िािा ै, तो उपयोगकताि या लाइसेंसधारी के

जियंत्रण व्यजक्त, िैसा भी मामला ो, जिसे कायि करिा ै, को सीधे अपिे समकषम से संपकि करिा चाज ए।

दोिों पषम ों की स ी प चाि सुजिजित करिे के जलए कायि के समय कोड िब्दों पर स मजत ोिी चाज ए। धनयांत्रण व्यधियों के

बीच सांपकष आम तौर पर सीिे टेलीफोन या ईमेल के माध्यम से दकया िािा चाज ए।

8.3.4 यकद कायष एक पाली से अधिक चलता है, तो धनयांत्रण व्यधि कायषभार को राहत धनयांत्रण व्यधि को सौंप देगा और उसे कायष की

प्रकृधत और सांचालन में कोड शब्दों के बारे में पूरी जानकारी देगा।

8.3.5 धनयांत्रण व्यधि आिश्यक कायष को सुरधित तरीके से पूरा करने के धलए आिश्यक साििाधनयाां स्थाधपत करने और बनाए रखने में

सहयोग करेंगे। जहाां भी ऐसी सुधििाएां मौजूद हों, स्थाधपत अलगाि और स्थाधपत पृ्िी दोनों को बांद धस्थधत में रखा जाएगा,

और इन्हें स्पष्ट रूप से पहचाना जाएगा।

8.3.6 कायष का प्रभारी धनयांत्रण व्यधि स्ियां को सांतुष्ट करेगा कक कायष शुरू करने से पहले बरती जाने िाली सभी सुरिा साििाधनयाां

स्थाधपत कर ली गई हैं। काम शुरू करने की अनुमधत देने के धलए उसे कायष दल को सुरिा दस्तािेज जारी करना चाधहए।

8.3.7 कायष पूरा होने के बाद, ककए जा रहे कायष के प्रभारी धनयांत्रण व्यधि को य संतुजष्ट ोिी चाधहए कक बरती गई सुरिा

साििाधनयों की अब आिश्यकता नहीं है, और उसे अपिे समकषम जियंत्रण व्यजक्त से सीधा संपकि करिा चाज ए और सुरषम ा

सािधाजियों को ािे का अिुरोध करिा चाज ए। उपकरण को सभी सुरिा साििाधनयों को हटाने की पुधष्ट के बाद, सीिे

सांचार द्वारा, दो धनयांत्रण व्यधियों के बीच कोड िडष सांपकष का उपयोग करके, और कायष दल से सहमत सुरिा दस्तािेज की

िापसी के बाद ही सेिा में िापसी के धलए उपयुि घोधर्त दकया िािा चाज ए।

8.3.8 धितरण लाइसेंसिारी सीमा पार सुरिा के धलए एक सहमत धलधखत प्रकक्रया धिकधसत करेगा और उसे लगातार अद्यतन करेगा।

8.3.9 यकद पारेषण लाइसेंसिारी कोई पि नहीं है, सीमा पार सुरिा से सांबांधित ककसी भी धििाद का समािान पारेषण लाइसेंसिारी

के स्तर पर दकया िािा चाज ए, ऐसे मामले में जहाां पारेषण लाइसेंसिारी एक पि है, धििाद के समािान के धलए धििाद को

आयोग को भेजा िािा चाज ए।

8.4 धिशेर् धिचार

8.4.1 क्रॉस बाउांड्री सर्कषट पर सभी उपकरण, धजनका उपयोग सुरिा समन्िय और अलगाि और अर्थिंग की स्थापना के उद्देश्य से ककया

जा सकता है, को स्थायी रूप से और स्पष्ट रूप से एक पहचान सांख्या या नाम के साथ धचधननत दकया िािा चाज ए जो धिशेर्

उप-स्टेशन के धलए अधद्वतीय होगा। इस उपकरण के धनमाषता के धिधनदेशों के अनुसार धनयधमत रूप से धनरीिण और रखरखाि

दकया िािा चाज ए।

8.4.2 प्रत्येक धनयांत्रण व्यधि रधजस्टर में हाथ से धलखा हुआ या कायाषलय पीसी के माध्यम से सॉफ्ट कॉपी में एक सुरिा लॉग बनाए

रखेगा। उसके द्वारा भेजे गए और प्राप्त ककए गए सुरिा समन्िय से सांबांधित सभी कायों और सांदेशों की जानकारी को

कालानुक्रधमक क्रम में बनाए रखा जाना चाधहए।

8.4.3 जहाां तक सांभि हो प्रत्येक धितरण लाइसेंसिारी प्रत्येक सबस्टेशन द्वारा पोधर्त िेत्र से सांबांधित अपने प्रणाली का एक अद्यतन

नक्शा बनाए रखेगा।

अध्याय - 9 घटना/दुघषटना ररपोर्टिंग

9.1 उद्देश्य

य अध्याय उपयोगकताि द्वारा लाइसेंसधारी और लाइसेंसधारी द्वारा उपयोगकताि और आयोग को प्रमुख घ िा/दुघि िा

ठरपोर् िंग (िो जितरण प्रणाली में घठ त ोती ै) की प्रदिया को िाजमल करता ै।

[भागIII—खण् ड 4]

भारत का रािपत्र : असाधारण

33

9.2 बडी घटना या दुघषटना की ररपोर्टिंग

9.2.1 धितरण लाइसेंसिारी, लाइसेंसिारी के आपूर्तष िेत्र में सभी महत्िपूणष घटनाओं पर आयोग को एक प्रारांधभक ररपोटष भेजेगा,

धजसके पररणामस्िरूप सेिा में रुकािट, उपकरण को पयाषप्त िधत या जीिन की हाधन या मानि को महत्िपूणष चोट लगने के एक

सप्ताह के भीतर घटना होती है। इसके बाद एक महीने के भीतर धिस्तृत ररपोटष दी जाएगी।

9.2.2 धितरण लाइसेंसिारी और उपयोगकताष सूचना के आदान-प्रदान के धलए एक प्रारूप और प्रकक्रया स्थाधपत करेंगे।

9.2.3 उपयोगकताष अपने प्रणाली में होने िाली ककसी भी बडी घटना के सांबांि में धितरण लाइसेंसिारी को तुरांत जानकारी प्रस्तुत

करेंगे।

9.3 ररपोर्टिंग प्रकक्रया

9.3.1 11 केिी और उससे ऊपर के सबस्टेशनों की लाइनों और उपकरणों में होने िाली सभी ररपोटष योग्य घटनाओं को तुरांत

लाइसेंसिारी द्वारा धितरण लाइसेंसिारी और पारेषण लाइसेंसिारी द्वारा पहचाने गए अन्य सभी महत्िपूणष रूप से प्रभाधित

उपयोगकताषओं को मौधखक रूप से सूधचत दकया िािा चाज ए, धजसके उपकरण ने घटना का अनुभि ककया है। जितरण

लाइसेंसधारी को ऐसे मौजखक संचार के एक घं े के भीतर पारेषण लाइसेंसधारी को एक जलजखत ठरपो ि प्रस्ट्तुत करिी

चाज ए।

यदद ठरपोर् िंग घ िा बडी प्रकृजत की ै, तो जलजखत ठरपो ि दो घं े के भीतर प्रस्ट्तुत की िािी चाज ए और उसके बाद प्रारंजभक

जलजखत ठरपो ि प्रस्ट्तुत करिे के 48 घं े के भीतर एक व्यापक ठरपो ि प्रस्ट्तुत की िािी चाज ए। अन्य मामलों में, ररपोर्टिंग

धितरण लाइसेंसिारी को पारेषण लाइसेंसिारी को पाांच कायष कदिसों के भीतर एक ररपोटष प्रस्तुत करनी होगी।

9.3.2 पारेषण लाइसेंसिारी अन्य उपयोगकताषओं को प्रभाधित करने िाली ककसी भी ररपोटष योग्य घटना पर धितरण लाइसेंसिारी से

ररपोटष माांगेगा और धिशेर् रूप से ऐसे मामलों में जहाां ऐसे उपयोगकताष धजनके उपकरण ररपोटष करने योग्य घटना का स्रोत हो

सकते हैं लेदकि इसकी ररपोटष नहीं करते हैं।

ालााँदक, य दकसी भी उपयोगकताि को जिद्युत अजधजियम, 2003 के त त बिाए गए प्रासंजगक प्रािधाि के त त बिाए गए

जियमों के अिुसार घ िाओं की ठरपो ि करिे के दाजयत्ि से रा त ि ीं देगा। ऐसी ठरपो ि का प्रारूप जितरण कोड समीषम ा पैिल

के अिुमोदि के अिुसार ोगा और इसमें आम तौर पर जिम्नजलजखत िाजमल ोंगे:

(क) घटना का स्थान,

(ख) घटना की तारीख और समय,

(क) शाधमल सांयांत्र या उपकरण,

(ग) घटना की प्रकृधत (धिद्युत या गैर-धिद्युत),

(घ) बाजधत आपूर्ति और अिजध ि ां भी लागू ो,

(ङ) उत्पादन की हाधन की मात्रा, जहाां भी लागू हो,

(च) घटना से पहले और बाद में धसस्टम पैरामीटर (िोलटेज, फ्रीक्वेंसी, लोड, जेनरेशन, आकद)

(छ) घटना से पहले नेटिकष कॉधन्फगरेशन,

(ि) ररले सांकेत और सुरिा का प्रदशषन,

(झ) घटना का सांधिप्त धििरण,

(ञ) सेिा में िापसी का अनुमाधनत समय,

( ) कोई अन्य प्रासांधगक जानकारी,

(ि) भधिष्य में सुिार के धलए धसफाररशें,

34

THE GAZETTE OF INDIA : EXTRAORDINARY

[PART III—SEC.4]

(ड) ररपोटष करने िाले व्यधि का नाम और पदनाम।

9.3.3 ररपोटष में घटना का िणषन करने के धलए पयाषप्त धििरण होना चाधहए ताकक प्राप्तकताष इससे उत्पन्न होने िाले धनधहताथों और

जोधखमों का आकलन कर सके। जहाां भी आिश्यक हो, प्राप्तकताष स्पष्टीकरण और अधतररि जानकारी माांग सकता है और यह

अधनिायष है कक ररपोर्टिंग उपयोगकताष अपना सिषश्रेष्ठ प्रयास करेगा और सभी आिश्यक और उधचत जानकारी प्रदान करेगा।

9.3.4 ककसी भी पि द्वारा अनुरोि के मामले में, मौधखक ररपोटष प्रेर्क द्वारा धलखी जाएगी और टेलीफोन सांदेश के माध्यम से धनदेधशत

की जाएगी या प्राप्तकताष को फैक्स/ई-मेल द्वारा भेजी जाएगी। आपातकालीन धस्थधत में ररपोटष केिल मौधखक रूप से दी जा

सकती है और उसके बाद धलधखत पुधष्ट की जा सकती है।

9.3.5 दुघषटनाओं की ररपोर्टिंग दुघषटनाओं की सूचना (नोरटस का रूप और समय पर सेिा) धनयम 2004 के साथ धिद्युत अधिधनयम,

2003 की िारा 161 या अन्य लागू धनयमों के अनुसार पढी जाएगी। जब तक ऐसे धनयम नहीं बन जाते, धितरण लाइसेंसिारी

इन धिधनयमों के अनुबांि 4 के अनुसार जिद्युत प्रणाली सुरिा मानक (भारतीय धिद्युत धनयम 1956) में उधललधखत दुघषटनाओं

की ररपोर्टिंग का पालन करेगा।

अध्याय – 10: धिधिि

10.1 धििाद धनिारण

जितरण संज ता के दकसी भी प्रािधाि की व्याख्या से संबंजधत दकसी भी जििाद को आयोग के सजचि को संबोजधत दकया िािा

चाज ए। आयोग का धनणषय अांधतम और सभी सांबांधित पिों के धलए बाध्यकारी माना जाएगा।

10.2 करठनाइयों को दूर करने की शधि

यदद जितरण संज ता के दकसी भी प्रािधाि को प्रभािी करिे में कोई कठििाई उत्पन्न ोती ै, तो आयोग, सामान्य या जिजिष्ट

आदेि द्वारा, ऐसे प्रािधाि बिा सकता ै िो अजधजियम के प्रािधािों से असंगत ि ों, िो कठििाई को दूर करिे के जलए

आिश्यक प्रतीत ों।

10.3 छू देिे की िजक्त

आयोग, सामान्य या जििेष आदेि द्वारा, कारणों को जलजखत रूप में दिि करके, और छू ददए िािे से प्रभाजित ोिे िाले

संभाजित पषम ों को सुििाई का अिसर प्रदाि करिे के बाद, आदेि में जिर्दिष्ट अिजध के जलए अपिे स्ट्ियं के प्रस्ट्ताि पर या

दकसी इच्छुक व्यजक्त द्वारा उसके समषम दकए गए आिेदि पर इि जिजियमों के दकसी भी प्रािधाि में छू दे सकता ै।

10.4 सांशोिन करने की शधि

आयोग, ककसी भी समय, इन धिधनयमों के ककसी भी प्राििान को जोड, बदल, पररिर्तषत, सुधार या सांशोधित कर सकता

है।

10.5 धनरसन और बचत

10.5.1 इि जिजियमों में कुछ भी ऐसा ि ीं मािा िािा चाज ए िो न्याय के उद्देश्यों को पूरा करिे या आयोग की प्रदिया के दुरुपयोग

को रोकिे के जलए आिश्यक ऐसे आदेि देिे के जलए आयोग की अंतर्ििज त िजक्त को सीजमत या अन्यथा प्रभाजित करता ो।

10.5.2 इि जिजियमों में कुछ भी आयोग को अजधजियम के प्रािधािों के अिुरूप ऐसी प्रदिया अपिािे से ि ीं रोकेगा, िो इि

जिजियमों के दकसी भी प्रािधाि से जभन्न ो, यदद आयोग, दकसी मामले या मामलों के िगि की जििेष पठरजस्ट्थजतयों को ध्याि में

रखते हुए और कारणों को जलजखत रूप में दिि करिे के जलए, ऐसे मामले या मामलों के िगि से जिप िे के जलए इसे आिश्यक या

समीचीि समझता ै।

10.5.3 इन धिधनयमों में कुछ भी, स्पष्ट या अप्रत्यि रूप से, आयोग को अधिधनयम के तहत ककसी भी मामले से धनपटने या ककसी भी

शधि का प्रयोग करने से नहीं रोकेगा, धजसके धलए कोई धिधनयम तैयार नहीं ककया गया है, और आयोग ऐसे मामलों, शधियों

और कायों से उसी तरीके से धनपट सकता है जैसे कक ि उधचत समझता ै।

[भागIII—खण् ड 4]

भारत का रािपत्र : असाधारण

35

10.5.4 अपनाए गए इन धिधनयमों की अधिसूचना के बाद से, सांयुि धिद्युत धिधनयामक आयोग गोिा और केंद्र शाधसत प्रदेश (धितरण

कोड) धिधनयम, 2010, उसमें ककए गए सांशोिनों के साथ, धनरस्त हो जाएांगे।

आयोग के आदेि द्वारा।

िी.के. िर, सधचि

[जिज्ञापि-III/4/असा./609/2023-24]

पठरजिष्ट 1: 1 मेगािा और उससे अजधक की मांग के जलए डे ा लोड

1.

भार का प्रकार: (उदाहरण के धलए, फनेस भार, रोसलांग धमलस, िैक्शन भार, पांसपांग भार, औद्योधगक भार आकद)

2.

अधिकतम माांग (केिीए)

3.

िर्ष (िषों) जब तक पूणष/आांधशक भार आपूर्तष की आिश्यकता है: (भार का चरणबद्ध धििरण प्रस्तुत दकया िािा चाज ए)

4.

लोड का स्ट्थाि, पैमािे पर खींचे गए स्ट्थाि मािजचत्र के साथ:

5.

रेटेड िोलटेज, आिृधत्त और चरणों की सांख्या धजस पर आपूर्तष की आिश्यकता है:

6.

उपकरण का धििरण:

(क) मो र: उद्देश्य और स्ट्थापिाओं की संख्या, िोल् ेि और दकलोिा रेट ंग, िुरू करिे की जिजध, आरंजभक जबिली और अिजध,

मो रों का प्रकार, ड्राइि के प्रकार और जियंत्रण उपकरण आदद बताएं)

(ख) तापि: (प्रकार और ककलोिाट रेटटांग)

(ग) फनेस: (प्रकार, फनेस िाांसफामषर िमता और िोलटेज अनुपात)

(घ) इलेक्िोधलधसस: (उद्देश्य और केिीए िमता)

(ङ) प्रकाश: ककलोिाट माांग।

(च) धििरण के साथ कोई अन्य भार:

7.

अजधकतम भार के समय िोल् ेि और आपूर्ति की आिृजत्त में उतार-चढाि के प्रजत मांग की गांभीरता:(जििरण दें)।

8.

प्रणाली पर लगाया गया चरण असांतुलन:

9.

अधिकतम:_______________________ औसत:

10.

प्रणाली पर लगाई गई अधिकतम हामोधनक सामिी: (हामोधनक्स के दमन के धलए प्रस्ताधित उपकरणों का धििरण प्रस्तुत करें)।

11.

कनेक्शन के सबांदु पर 10 मेगािाट से अधिक की माांग में उतार-चढाि का कारण बनने िाले भार का धििरण, धजसमें 5 सेकांड या

उससे अधिक समय तक चलने िाला िोलटेज धडप्स (प्रधतशत) भी शाधमल है।

पठरजिष्ट 2: एांबेडेड जेनरेटर यूधनट-िार डेटा

ि.सं

धििरण

ब्योरा

1.

उत्पादन कांपनी का नाम और पता:

2.

उत्पादक संयंत्रों का स्ट्थाि:

3.

जनरेशन िोलट (केिी);

4.

रे ेड केिीए/दकलोिा

5.

भेिी गई अजधकतम और न्यूितम सदिय जबिली (दकलोिा ) प्रजतदियािील

िजक्त षम मता (केिीएआर), यदद कोई ो;

36

THE GAZETTE OF INDIA : EXTRAORDINARY

[PART III—SEC.4]

6.

उत्पादि संयंत्र का प्रकार - तुल्यकाजलक, अतुल्यकाजलक, आदद;

7.

िोल् ेि जियंत्रण की जिजध;

8.

जेनरेटर िाांसफामषर धििरण, यकद लागू हो;

9.

ॉप-अप आपूर्ति और/या अजतठरक्त आपूर्ति के जलए आिश्यकताएाँ;

10.

जेनरेटर केडब्लयू/केिीएआर िमता चाटष (कम िोलटेज टर्मषनलों पर);

11।

एक्ससाइ ेिि प्रणाली के प्रकार;

12.

िडत्ि जस्ट्थरांक दकलोिा सेकंड/केिीए;

13.

स्टेटर प्रधतरोि;

14.

प्रत्यि-अि प्रधतकक्रया (उप-िधणक, िधणक और तुलयकाधलक);

15.

चतुभुषज-अि प्रधतकक्रया (उप-िधणक और तुलयकाधलक);

16.

िून्य अनुक्रम (प्रजतरोध एिं प्रजतदिया);

17.

नकारात्मक अनुक्रम (प्रधतरोि एिं प्रधतकक्रया);

18.

जेनरेटर िाांसफामषर (प्रधतरोि, प्रधतकक्रया, केिीए रेटटांग, टैप व्यिस्था, िेक्टर

समूह, िाउांसडांग, कनेक्शन और % प्रधतबािा);

19.

स्ट्िचाजलत िोल् ेि जिजियामक ब्लॉक आरेख, जिसमें लाभ (अग्रेषण और

प्रजतदिया), समय जस्ट्थरांक और िोल् ेि जियंत्रण सीमा पर डे ा िाजमल ै;

20.

स्ट्पीड गिििर ब्लॉक आरेख, यदद लागू ो तो गिििर ्लाई-बॉल, और जियंत्रण

प्रणाली और प्राइम मूिर समय जस्ट्थरांक, रबाइि रेट ंग और अजधकतम िजक्त

के साथ जििरण देता ै।

21.

स्टैंडबाय आिश्यकताएाँ:

I.

अजतठरक्त षम मता आिश्यकताओं के जलए दकलोिा में प्रत्येक उत्पादि इकाई

और पािर स्ट् ेिि की रे ेड षम मता और न्यूितम उत्पादि।

II. .

रे ेड षम मता ितों पर दकलोिा और केिीएआर में यूजि और पािर स्ट् ेिि

स ायक मांग (सदिय पािर और ठरएजक् ि पािर) उत्पन्न करिा।

III.

इं रफेस व्यिस्ट्था जितरकों और उपयोगकताि के बीच बसंििाइजेिि का साधि

ै;

IV.

िेिरे र जसस्ट् म के उस ज स्ट्से को सीधे जितरण प्रणाली से िोडिे की व्यिस्ट्था

का जििरण;

V.

िोडिे और का िे के िो साधि जियोजित दकये िािे ैं

VI.

यदद उत्पादि इकाई का कोई भी ग्राउंडेड न्यूरल बबंदु िमीि से अलग ो िाता

ै तो सुरजषम त जस्ट्थजतयों की जिरंतरता सुजिजित करिे के जलए बरती िािे

िाली सािधाजियां।

VII.

उत्पादि इकाई की सुरषम ा प्रणाली का जििरण

पठरजिष्ट 3: प्रणाली डे ा

जितरण लाइसेंसधारी जिद्युत उपकरणों के जडिाइि और चयि के जलए उपभोक्ता द्वारा अपेजषम त जिम्नजलजखत जििरणों में से

केिल प्रासंजगक जििरण प्रदाि करेगा:

1.

लाइसेंसिारी द्वारा सीमाओं को धचधननत करके आपूर्तष के िेत्र का टोपोलॉधजकल मानधचत्र।

2.

जितरण लाइसेंसधारी का कम से कम 1 सेमी से 2.5 दकलोमी र के पैमािे पर तैयार दकया गया जितरण मािजचत्र, जिसमें

लाइसेंसधारी के आपूर्ति षम ेत्र के भीतर मौिूदा एच ी/ईएच ी लाइिें और सबस्ट् ेिि ददखाए गए ैं। जिमािणाधीि या अगले पांच

िषों के जलए योििाबद्ध लाइिों और सबस्ट् ेििों को बबंदीदार रेखाओं में ददखाया िाएगा।

3.

धितरण प्रणाली का ससांगल लाइन आरेख, लाइन की लांबाई, कांडक्टर आकार, सबस्टेशन िमता, स्थानों के साथ कैपेधसटर

आकार, ऑटो-ररक्लोजर इत्याकद कदखाता है।

4.

सबस्टेशनों पर मीटटरांग और ररलेइांग का धििरण।

[भागIII—खण् ड 4]

भारत का रािपत्र : असाधारण

37

5.

इांटरकनेक्शन के सबांदु पर धिड सबस्टेशनों का धििरण इस प्रकार है:

i.

एमिीए िमता और िोलटेज,

ii.

िाांसफामषर की सांख्या, प्रत्येक िाांसफामषर की िमता, िोलटेज अनुपात, नल की रेंज प्रधतबािा

iii.

सबस्टेशन बस बार पर दोर् स्तर, तीन चरण और एकल लाइन से िाउांड दोर् दोनों

iv.

बस प्रधतबािा,

v.

सबस्टेशन लेआउट आरेख।

6.

कनेक्शन सबांदुओं/इांटरफेस सबांदु पर धनकासी: धपछले छह महीनों के दौरान पारेषण प्रणाली या अन्य धितरण लाइसेंसिाररयों के

साथ प्रत्येक कनेक्शन से अधिकतम और न्यूनतम मेगािाट धनकासी

पठरजिष्ट 4: भारतीय जिद्युत जियम, 1956 का जियम संख्या 44 क

जियम िमांक 44 क - दुघि िा की सूचिा

यदद जिद्युत आपूर्ति लाइिों के दकसी भाग या दकसी व्यजक्त के अन्य कायों में ऊिाि के उत्पादि, पारेषण, आपूर्ति या उपयोग के संबंध में

कोई दुघि िा ोती ै और दुघि िा के पठरणामस्ट्िरूप मािि या पिु िीिि की ाजि या दकसी मिुष्य या िाििर को कोई चो लगिे

की संभाििा ै, ऐसा व्यजक्त या जितरण लाइसेंसधारी का कोई अजधकृत व्यजक्त िो कजिष्ठ अजभयंता या समकषम पद से िीचे ि ो, उसे

घातक दुघि िा की घ िा की िािकारी ोिे के 24 घं े के भीतर जिरीषम क को एक ेलीग्रादिक ठरपो ि और घातक दुघि िा और अन्य

सभी दुघि िाओं की िािकारी ोिे के 48 घं ों के भीतर अिुबंध XIII में जिधािठरत िॉमि में एक जलजखत ठरपो ि भेििी चाज ए। घातक

दुघषटना और अन्य सभी दुघषटनाओं के घरटत होने का ज्ञान। ि ां संभि ो, जितरण लाइसेंसधारी के अजधकृत अजधकारी या अन्य

संबंजधत व्यजक्त को दुघि िा की िािकारी ोिे पर तुरंत जिरीषम क को एक ेलीिोि संदेि भी ददया िािा चाज ए।

भारतीय जिद्युत जियम, 1956

[पठरजिष्ट XIII]

जिद्युत दुघि िाओं की ठरपो ि करिे के जलए प्रपत्र

(धनयम 44- क देखें)

क्रमाांक

धििरण

धििरण

1

दुघि िा की जतजथ एिं समय

2

दुघि िा का स्ट्थाि

(गांि/कस्ट्बा, त सील/थािा, जिला और राज्य)

3

आपूर्ति की प्रणाली और िोल् ेि

(चा े ईएचिी/एचिी/एलिी लाइि, सब-स्ट् ेिि/ििरेट ंग स्ट् ेिि/उपभोक्ता की

स्ट्थापिा/सेिा लाइिें/अन्य स्ट्थापिा)

4

प्रभारी अजधकारी का पदिाम (जिसके अजधकार षम ेत्र में दुघि िा हुई)

5

ऊिाि के माजलक/उपयोगकताि का िाम जिसके पठरसर में दुघि िा हुई।

6

पीजडत का जििरण

(क)

मािि

ि.सं.

िाम

जपता का िाम

पीजडता का बलंग

पूरा डाक पता

लगभग आयु

घातक/गैरघातक

(ख)

पिु

ि.सं.

िाििरों का जििरण

संख्या

माजलक(माजलकों) का िाम

माजलक(ओं) का

पता

घातक/गैरघातक

7

यदद पीजडत व्यजक्त कमिचारी ै/कमिचारी ैं:

क) ऐसे व्यजक्त(व्यजक्तयों) का पदिाम

38

THE GAZETTE OF INDIA : EXTRAORDINARY

[PART III—SEC.4]

ख) दकए गए कायि का संजषम प्त जििरण, यदद कोई ो।

ग) क्या ऐसे व्यजक्त/व्यजक्तयों को िौकरी पर काम करिे की अिुमजत थी।

8

यदद पीजडत दकसी लाइसेंस प्राप्त िेकेदार का कमिचारी ैं:

क) क्या पीजडत के पास जियम 45 के त त िारी कोई जबिली कमिचारी का

परजम , पयिेषम क का योग्यता प्रमाण पत्र था?

ख) यदद ााँ तो िारी करिे की संख्या और तारीख तथा िारी करिे िाले प्राजधकारी

का िाम दें।

ग) उस व्यजक्त का िाम और पदिाम जिसिे पीजडत (पीजडतों) को जिम्मेदाठरयां

सौंपी थीं

9

जितरण लाइसेंसधारी प्रणाली में दुघि िा की जस्ट्थजत में, क्या 'कायि करिे का

परजम ' (पी ीडब्ल्यू) जलया गया था?

10

चोटों की प्रकृधत और सीमा का पूरी तरह से िणषन करें, उदाहरण के धलए, शरीर के

ककसी धहस्से की घातक/अिमता (स्थायी या अस्थायी) या जलन या अन्य चोटें।

घातक दुघषटना के मामले में, क्या पोस्टमाटषम ककया गया था?

11

दुघषटना के धिस्तृत कारण

(इस प्रपत्र के साथ संलग्न एक अलग िी में ददया िािा ै)

12

दुघषटना घरटत होने के तुरांत बाद प्राथधमक धचककत्सा, धचककत्सा उपधस्थधत आकद के

सांबांि में की गई कायिा ी (ब्यौरा दें)

13

क्या संबंजधत जिला मजिस्ट्रे और पुजलस स्ट् ेिि को दुघि िा की सूचिा दी गई ै

(यदद ां, तो जििरण दें)

14

दुघषटना के सांबांि में साक्ष्यों को यथासांभि सुरधित रखने के धलए उठाए गए कदम।

15

मारे गए या घायल व्यधियों की सहायता करने िाले, पयषिेिण करने िाले व्यधियों

के नाम और पदनाम।

16

इस दुघि िा का जिकार हुए व्यजक्तयों को कौि से सुरषम ा उपकरण ददए गए थे और

उिके द्वारा उपयोग दकया गया था (उदा रण के जलए, रबर के दस्ट्तािे, रबर मै ,

सुरषम ा बेल् और सीढी आदद)?

17

क्या सेक्िि पर काम करिे के जलए आइसोलेट ंग जस्ट्िच और अन्य

सेक्ििलाइबजंग जडिाइस का उपयोग दकया गया था? क्या कायि स्ट्थल पर कायि

अिुभाग की अर्थिंग की गई थी?

18

क्या लाइि लाइिों पर कायि प्राजधकृत व्यजक्त (यों) द्वारा दकया गया था?

यदद ां, तो ऐसे व्यजक्त(यों) का िाम और पदिाम ददया िाए।

19

क्या लाइि लाइिों पर कृजत्रम पुििीिि उपचार कायि प्राजधकृत व्यजक्त (यों) द्वारा

दकया गया था?

यदद ां, तो इसे छोडे िािे से प ले इसे कब तक िारी रखा गया था?

20

दुघषटना में उपधस्थत और गिाह रहे व्यधियों के नाम और पदनाम।

21

कोई अन्य जानकारी/रटप्पधणयााँ।

स्ट्थाि:

समय:

जतजथ:

हस्तािर:

नाम एिां पदनाम:

ररपोटष करने िाले व्यधि का पता:

पठरजिष्ट 5: संजषम प्ताषम रों की सूची

ि.सं.

संषम ेपाषम र

पूणि रूप फामष

1

ए ए सी

पूणि एलुजमजियम कंडक् र

2

ए ए ए सी

पूणि एल्यूमीजियम जमश्र धातु कंडक् र

3

ए सी एस आर

एल्यूजमजियम कंडक् र स्ट् ील प्रबजलत

4

बी आई एस

भारतीय मािक ब्यूरो

5

एस ए आई डी आई

जसस्ट् म औसत व्यिधाि अिजध सूचकांक

6

एस ए आई एि आई

जसस्ट् म औसत व्यिधाि आिृजत्त सूचकांक

7

सी बी आई पी

केंद्रीय बसंचाई एिं जिद्युत बोडि

8

सी ई ए

केंद्रीय जिद्युत प्राजधकरण

[भागIII—खण् ड 4]

भारत का रािपत्र : असाधारण

39

9

सीई आई

मुख्य धिद्युत धनरीिक

10

सी टी

करें रांसिॉमिर

11

डी सी आर

धितरण कोड समीिा

12

डी सी आर पी

धितरण कोड समीिा पैनल

13

ई एच िी/ई एच टी

अधतररि उच्च िोलटेज/अधतररि उच्च तनाि

14

िी. आई.

िस्ट्ती लो ा

15

जी एस एस

गैस उपकेंद्र

16

एच िी

उच्च िोलटेज/

17

एच. ी

उच्च तनाि

18

एच िेड

हर्टजष (चक्र प्रधत सेकांड)

19

आई डी एम टी

व्युत्िम जिजित न्यूितम समय

20

आई ई ई इ

इंस्ट् ीट्यू ऑफ इलेजक्रकल एंड इलेक्रॉजिक्स इंिीजियसि

21

आई ई सी

अंतरािष्ट्रीय इलेक्रो तकिीकी आयोग

22

आई ई जी सी

भारतीय जिद्युत जग्रड कोड

23

आई.एस

भारतीय मािक

24

आई पी

बसंचाई पांप

25

के.ए

ककलो एम्पीयर

26

के. डब्ल्यू

ककलो िाट

27

के. डब्ल्यू. एच

ककलो िाट घांटा

28

के.िी.ए

ककलो िोलट एम्पीयर

29

एल. ी

कम तिाि

30

एल.िी

कम िोलटेज

31

एम सी बी

धमधनएचर सर्कषट ब्रेकर

32

एम िी ए

मेगा िोल् एम्पीयर

33

एम डब्ल्यू

मेगािाट

34

पी सी सी

प्रीस्ट्रेस्ट्ड सीमें कंिी

35

पी टी

षम मता रांसिामिर

36

पी टी डब्लयू

कायि करिे की अिुमजत

37

आर. सी. सी

प्रबजलत सीमें कंिी

38

आर ई सी

ग्रामीण जिद्युतीकरण जिगम

39

आर एंड आर

पुििािस एिं पुिःस्ट्थापि

40

एस सी ए डी ए

पयिेषम ी जियंत्रण और डा ा अजधग्र ण

41

एस एल डी सी

राज्य भार प्रेषण केंद्र

42

एस. ी.यू

राज्य पारेषण उपयोजगता

JOINT ELECTRICITY REGULATORY COMMISSION

(For the UT of Jammu & Kashmir and the UT of Ladakh)

NOTIFICATION

Jammu, the 29th November, 2023

No. JERC-JKL/Reg/2023/18.—In exercise of the powers conferred on it by Section 181 (1) and 181 (2)

read with Section-14 of the Electricity Act 2003 (Act No. 36 of 2003) (hereinafter referred to as “the Act"), and all

powers enabling it in that behalf including sub-ordinate legislation, rules, statutory orders, resolutions, clarifications

issued by the Government in terms of the Act, the Joint Electricity Regulatory Commission for the UT of Jammu &

Kashmir and the UT of Ladakh hereby makes the following Regulations to enforce standards with respect to Quality,

Continuity and Reliability of service by the licensees.

40

THE GAZETTE OF INDIA : EXTRAORDINARY

[PART III—SEC.4]

CHAPTER 1: GENERAL

1.1.

Short Title, Commencement, Extent, and Interpretation

1)

These regulations shall be called the Joint Electricity Regulatory Commission for the UT of Jammu & Kashmir

and the UT of Ladakh (Distribution Code) Regulations, 2023.

2)

These Regulations shall come into force from the date of its publication in the official gazette.

3)

These Regulations shall extend to the UT of Jammu & Kashmir and the UT of Ladakh.

1.2.

Definitions

1.2.1 In these regulations, the following words and expressions shall, unless the subject matter or context otherwise

requires or is inconsistent therewith, bear the following meanings:

a) “Act” means the Electricity Act, 2003 (Act no. 36 of 2003);

b) “Agreement” means an agreement entered into by the Distribution Licensee and the User;

c) “Apparatus” means electrical apparatus and includes all machines, fittings, accessories and

appliances connected to the Electrical Distribution System;

d) “CBIP” means Central Board of Irrigation and Power;

e) “CEA” means Central Electricity Authority;

f) “Circuit” means an arrangement of conductor(s) for the purpose of conveying electrical energy and forming

a system or a branch of a system;

g) “Commission” means the Joint Electricity Regulatory Commission for the UT of Jammu & Kashmir and the

UT of Ladakh;

h) “Conductor” means any wire, cable, bar, tube, rail or plate used for conducting energy and electrically

connected to the system;

i)

“Connected Load” means the aggregate of the manufacturer’s rating of all energy-consuming apparatus duly

wired and connected to the power supply system of the licensee including portable apparatus in the

consumer’s premises. This shall not include the load of spare plugs, sockets, load exclusively installed for

firefighting purposes. A load of either water and room heating or room cooling apparatus, whichever is

higher, shall be taken into account as per prevailing season (1st April to 30th September for cooling use

and 1st October to 31st March for heating use). The definition of connected load shall be used only for

the purpose of assessment in case of direct theft or dishonest abstraction of energy or unauthorized use of

energy;

j)

“Control Person” means a person identified as having the technical capability and responsibility for

cross-boundary safety;

k) “DCR” means Distribution Code Review;

l)

“DCRP” means Distribution Code Review Panel;

m) “Embedded” means having a direct electrical connection to an intra-state electrical system;

n) “Extra High Tension (EHT)” means a voltage of 33000 Volts and above under normal conditions

subject to the percentage variation permissible under the Indian Electricity Rules 1956;

o) “GSS” means Grid Sub-station;

p) “High Tension (HT) or High Voltage (HV)” means the voltage between 650 volts and 33000 Volts

under normal conditions subject to the percentage variation permissible under the Indian Electricity

Rules 1956;

q) “Indian Standards (IS)” means those Standards and specifications approved by the Bureau of Indian

Standards;

r) “Interface Point/Connection Point/Boundary Point” means a point at which a User’s electrical

system is connected to the Licensee’s Distribution System;

s) “Low Tension (LT) or Low Voltage (LV)” means the voltage of 230 volts between phase and neutral

or 400 volts between any two phases under normal conditions subject to the percentage variation

permissible under the Electricity Rules;

t)

“Power Factor” means the ratio of Active Power (kW) to Apparent Power (KVA);

[भागIII—खण् ड 4]

भारत का रािपत्र : असाधारण

41

u) “PTW” means a permit to work;

v) “REC” means Rural Electrification Corporation;

w) “Transmission System” means the system consisting of extra high voltage electric lines being operated

at EHT (excluding generator interconnection facilities) owned and/or operated by the Transmission

Licensee for the purposes of the transmission of electricity from one power station to a sub-station or to

another power station or between sub-stations or to or from any external interconnection equipment up

to the interconnection with the distribution system, any plant and apparatus and meters owned or used

by the Transmission Licensee in connection with the transmission of electricity, but shall not include

any part of the Licensee distribution system;

x) “User” means any person having electrical interface with, or using the Distribution System of the

Distribution Licensee to whom this Code is applicable. Any other Distribution Licensee, Transmission

Licensee, and generating units connected to the Distribution system are also included in this term;

1.2.2 Words and expressions used and not defined in this Code but defined in the Acts shall have the meanings

assigned to them in the said Acts. Expressions used herein but not specifically defined in these regulations or in

the said Acts but defined under any law passed by a competent legislature and applicable to the electricity

industry in the state shall have the meaning assigned to them in such law. Subject to the above, expressions

used herein but not specifically defined in these regulations or in the Acts or any law passed by a competent

legislature shall have the meaning as is generally assigned in the electricity industry;

1.3.

Abbreviations

1.3.1 Abbreviations used in these regulations are listed and explained in the list of abbreviations annexed

to these regulations as Annexure 5.

1.4.

Introduction

1.4.1 The Distribution Code deals with technical aspects of the supply of electricity, which have an impact on

the quality, continuity, and reliability of service by licensees and the use of the Licensee’s Distribution

System for the distribution of electricity. It specifies the rights and obligations of the Distribution

Licensee and the Users in system planning and operation.

1.4.2 The Distribution Code is not exhaustive as to the requirements to be complied with by the Distribution

Licensee and the Users connected or seeking connection to the Licensee’s Distribution System. The

Distribution Licensee and all Users/Consumers must also comply with the requirement as laid down in

various codes, standards, and regulations under relevant laws in force.

1.5.

Objectives

The main objectives of this Distribution Code are-

a) To ensure the development and maintenance of an efficient, coordinated, and economical distribution

system and the distribution licensee and all distribution system participants comply with respective

obligations as provided in the Act, and

b) To bring together a set of rules, for using the distribution network and to provide-

(i)

The technical aspects of the working relationship between the licensee’s distribution system and to

those connected and seeking connection to it,

(ii) The facilitation of operation, maintenance, development, and planning of an economical and

reliable power distribution network.

(iii) Safety and protection parameters to be followed by the Distribution Licensees and Users.

1.6.

Applicability

1.6.1 These Regulations shall apply to all distribution licensees and the consumers of electricity.

1.6.2 These regulations shall be interpreted and implemented in accordance with and not at variance from, the

provisions of the Electricity Act, 2003 read with the Indian Electricity Rules, 1956 and any Central

Electricity Authority regulations in this regard.

1.6.3 These Regulations shall be applicable to all Distribution System participants including;

a) Distribution Licensee(s) including deemed licensees;

b) Open Access consumers connected to the Distribution System;

c) Entities covered under proviso 8 of Section-14 of the Act;

42

THE GAZETTE OF INDIA : EXTRAORDINARY

[PART III—SEC.4]

d) Bedded Generators;

e) All Consumer categories as defined under the Retail Supply Tariff Order.

1.7.

Implementation

1.7.1 The distribution licensee shall be responsible for the implementation of the Distribution code.

1.7.2 Nothing contained in this Code should be interpreted as imposing obligations/duties on Consumers/

Distribution Licensees greater or more onerous than those mentioned in the Electricity Act, 2003 under

relevant clauses.

1.7.3 The Distribution Code contains procedures for the management of day-to-day technical situations in the

Distribution System, taking into account a wide range of operational conditions likely to be encountered

under both normal and abnormal conditions. The Distribution Code cannot foresee all the possible

operating conditions. Users must therefore understand and accept that the Distribution Licensee, in such

unforeseen circumstances, may be required to act decisively and with due expedition to discharge his

obligations under the License. Users shall provide such reasonable co-operation and assistance as the

Distribution Licensee may require in such circumstances. The concerned Distribution Licensee shall

however refer all such cases for ratification in to the “Distribution Code Review Panel.”

1.8.

Confidentiality

Under the terms of the Distribution Code, the Distribution Licensee will receive information from Users

relating to their business. The Distribution Licensee shall not, other than as required by Distribution Code,

disclose such information to any other person without the prior written consent of such informant unless

required by Central/State government departments or any authority.

1.9.

Compliance

Non-compliance with any provision of the Distribution Code by the Distribution Licensee shall attract the

consequences as provided in the Acts or in the License. However, in the event of non-compliance with the

Distribution Code, the Distribution Licensee shall prepare and submit to Commission a plan of action for

compliance with the Distribution Code. Commission may exempt the Licensee from compliance of any

provisions for a particular period, if it is found that the compliance is not feasible for such period,

considering the resources available and the circumstances prevailing.

1.10. Procedures to settle disputes

In the event of any dispute regarding the interpretation of any regulations provided in the Distribution

Code between any User and the Distribution Licensee, the matter shall be referred to the Commission,

and the decision of the Commission shall be final and binding on both the parties.

CHAPTER – 2 MANAGEMENT OF DISTRIBUTION CODE

2.1

Objective

The chapter defines the method of managing the Distribution Code, pursuing of any changes/ modifications

required, and the responsibilities of the Distribution Licensees and the Users/ Consumers in this regard.

This section facilitates revisions taking into account the views of all parties in an equitable manner.

2.2

Distribution Code Review Panel

2.2.1 A standing body called Distribution Code Review Panel (DCRP) shall be constituted by Commission

comprising of the representatives of the Distribution Licensee as well as the Users of the Distribution

System in line with the provisions of the Distribution Code.

2.2.2 The chairperson and members except the secretary shall be part-time members of the panel. The review

panel shall generally consist of the following members who have the knowledge and practical experience

of technical matters related to the electricity supply by utilities. The commission shall nominate the

chairperson and secretary of the Distribution Code Review Panel on a rotation basis from among the

members of the Distribution Licensees, but at no point of time, the chairperson and secretary shall belong

to the same Distribution Licensee. The secretary shall be a full-time member of the Review Panel. The

members of the review panel shall be as follows:

a) One senior technical officer from each Distribution Licensee not below the rank of Executive Engineer.

b) One Member from Transmission Utility or SLDC.

c) One Member from a Transmission Licensee to represent all Transmission Licensees. After the tenure is

over for such a Member, the representative of a different Transmission Licensee (if operational in the

region) will be a member of the review panel.

[भागIII—खण् ड 4]

भारत का रािपत्र : असाधारण

43

d) One Member from among Captive Power Plants, co-generation units, thermal power plants, and

renewable energy plants, to represent all such users in the UT of Jammu & Kashmir and the UT of

Ladakh.

e) Open Access Customers connected to the Distribution Systems.

f) One member each representing Industrial, Agricultural, Domestic, and Commercial Consumers.

g) Such other members as the Commission may direct and find appropriate.

h) Commission shall develop a list of potential candidates to serve on the Distribution Code Review Panel,

which reflects a balance of the various interest groups in consultation with the Distribution Licensee.

2.2.3 The members of the Review Panel shall normally have a tenure of two years unless he/she ceases for any

reason to be a member of the Review Panel. The Chairperson of the Review Panel with the approval of

the Commission shall jointly consider the replacement of such members.

2.2.4 The functioning of the panel shall be coordinated by the secretary of the Review Panel.

2.2.5 Commission shall publish the names of the members of the Review Panel and also inform the same to

each of the Distribution Licensee(s).

2.2.6 The model code of the functioning of the Review Panel shall be finalized at the first meeting the of

Review Panel.

2.3

Functions of the review panel

The functions of the Review Panel shall be:

a) Maintenance of the Distribution Code and its working under continuous scrutiny and review.

b) Consideration of all requests for review made by any User and publication of their recommendations for

changes in the Distribution Code together with reasons for such changes.

c) Provide guidance on the interpretation and implementation of the Distribution Code.

d) Examination of the problems raised by any User as well as resolution of the problems.

e) Ensuring that the changes/modifications proposed in the Distribution Code are consistent and

compatible with standard technical manuals or guidelines, codes, laws, acts, rules, and regulations in

force at that point of time.

2.4

Review and Revisions

2.4.1 The Users seeking any amendment to the Distribution Code shall send written requests to the secretary of

the Review Panel with a copy to Commission. If the request is sent to the Commission directly, the same

shall be forwarded to the secretary of the Review Panel who shall, in consultation with the concerned

entities and such other persons as the Commission may direct, review the Distribution Code provisions.

The secretary will circulate the proposed changes/modifications to all the panel members for their written

comments within a reasonable time frame or the secretary may call for the Review Panel meeting in

consultation with the chairperson. Based on this interaction/ discussion, the necessary amendments/

revisions may be incorporated into the Distribution Code after the approval of the Commission.

2.4.2 The secretary shall send the following reports to the Commission at the conclusion of each review meeting

of the panel:

(a) Reports on the outcome of such review.

(b) Any proposed revision to the Distribution Code and its rationale.

(c) All written representations and objections submitted by the Users at the time of review.

2.4.3 All revisions to the Distribution Code require the approval of the Commission. The secretary shall publish

revisions to the Distribution Code, after the approval of the Commission. The Review Panel may also

submit proposals for relaxation in such cases where Users / Distribution Licensees have difficulties in

meeting the requirements of the Distribution Code.

2.4.4 Any changes from the previous version shall be clearly marked in the margin. In addition, a revision sheet

shall be placed at the front of the revised version, noting the number of every changed Sub-section,

together with reasons for such change.

2.4.5 The secretary shall maintain copies of the Distribution Code incorporating the latest amendments and

shall make it available at a reasonable cost to any person requiring it.

44

THE GAZETTE OF INDIA : EXTRAORDINARY

[PART III—SEC.4]

2.4.6 The Commission, may, on the application of the licensee or otherwise, call the emergency meeting of the

review panel as and when the situation so dictates and make such alterations and amendments in the

Distribution Code as it thinks fit.

CHAPTER – 3 DISTRIBUTION PLANNING CODE

3.1

Objectives

The following are the objectives of the Distribution Planning Code:

(a) To enable the planning, design and construction of the Distribution System for a safe and economical

operation with the specified degree of reliability conforming to the following standards:

(i)

Distribution System Planning and Security Standard.

(ii) Provisions applicable to Distribution System under Power System Management and Operating

Standard and Power System Safety Standard as prescribed by the authority under Electricity Act

2003.

(iii) Statutory Acts and Rules, which are in force,

(iv) Relevant Indian Standard Specifications, if applicable. The deviations may be permitted as per

specified limit; however, in any case, the security and safety shall not be hampered.

(v) REC (Rural Electrification Corporation) Construction Standards and manuals.

(b) To facilitate the use of the Distribution System by any User connected to or seeking connection with it,

(c) To prescribe the technical conditions to be followed by the respective Distribution Licensees and Users

in meeting the standards for an efficient operation of the common electrical interface,

(d) To prescribe the procedure for the exchange of the system planning data between the Distribution

Licensee and the Users,

(e) To provide the required information to the Users for connection, planning, and development of their

own systems and make them compatible with the Distribution System,

(f) To enable the Distribution Licensee to co-operate with the STU in furnishing the required data as

detailed in the Central / State Grid Code as the case may be.

3.2

Planning Policy

3.2.1 The Distribution Planning Code specifies the technical & design criteria and procedures to be followed by

the Distribution Licensee for proper planning and development of the Distribution System. This Code is

also applicable to the Users of the Distribution System for their planning and development so far as they

affect the Distribution System.

3.2.2 The requirement of the Users may necessitate the extension or reinforcement of the Distribution System.

In some cases, the same may even require the Distribution Licensee to seek the extension or reinforcement

to the capacity of the Transmission System at the Connection Point/ Interface Point. This may arise for a

number of reasons mentioned below, but not limited to the same:

(a) A development by any User in his system already connected to the Distribution System;

(b) Introduction of a new Connection Point/ Interface Point between the User’s System and the Licensee's

System;

(c) To increase the capacity of the Distribution System for meeting the security standards, removal of

constraints in operation, etc., and accommodate a general increase in Demand;

(d) Introduction of distributed renewable energy sources, battery storage, electric vehicles and charging

infrastructure, etc.

3.2.3 The development of the Distribution System must be planned sufficiently in advance allowing adequate

time to obtain the required statutory clearances, consents or way leaves, the detailed engineering, design

and construction work to be carried out and completed. The suitable management techniques shall be

implemented allowing for sufficient time for critical activities and to co-ordinate all the activities in an

efficient manner. These shall be taken care of at the time of planning itself.

3.3

Load Data

3.3.1 The Distribution Licensee shall develop load curves for the area fed by the concerned substation of the

Transmission Licensee from the metering data available at the Connection Point/ Interface Point. Such

data shall be compiled for the entire Area of Supply combining the load curves of each substation feeding

[भागIII—खण् ड 4]

भारत का रािपत्र : असाधारण

45

its Distribution System. The Distribution Licensees shall collect data and map the power factor of the

network (feeder-wise as well as consumer category wise by installing meters on typical distribution

transformers.)

3.3.2 The actual energy drawn by the Distribution System as recorded in the energy meters installed at

Connection Points / Interface Points shall be reconciled with the actual energy sales in the overall Area of

Supply. The aggregate distribution losses computed from these data shall be furnished to the Commission

at the time of filing for tariff petition every year.

3.3.3 All the Users with Demands of 1 MW and above seeking connection shall furnish their load

data/characteristics of the load and other relevant details to the Distribution Licensee as detailed in

Annexure 1.

3.3.4 The embedded generators connected with the Distribution System and seeking new connections shall

furnish planning data in the format specified in Annexure 2.

3.3.5 The Distribution Licensee shall exercise special care to monitor the actual development of loads in respect

of Consumers desiring to avail loads of 1 MW and above at a single point. The Distribution Licensee on

his part shall furnish relevant data for designing and selecting the electrical equipment, details of metering

and relay for purpose of protection and System data as detailed in Annexure 3, if required by the user

seeking connection to his Distribution System. The Distribution Licensee shall update the system data

regularly and at least once a year.

3.4

Forecast Methodology

3.4.1 The Distribution Licensee shall formulate a short-term demand forecast (to enable the State Transmission

Utility (STU) or SLDC in drawing down the annual planning process corresponding to a 5 years forward

annual plan for intra state transmission system). This shall be formulated after considering the previous

financial year as a base and projecting the demand for the succeeding 5 years, considering the overall

development of various sectors in his Area of Supply in succeeding five years. He should follow prudent

practices to arrive at load forecast for succeeding five years after considering all the aspects viz.

government policy/ economic development etc. During this process he shall also review the status of

loads materializing as per the previous load forecast. Further these forecasts shall be in line with the plan

to be developed at national level by CEA. The variation to the forecast shall be incorporated by the

Distribution Licensee, as and when it is known to Distribution Licensee and revise the forecast annually.

3.4.2 Energy sales in each tariff class shall be projected in the forecast period over the corresponding figures

relating to the base year by adopting an appropriate statistical method.

3.4.3 The projections shall take into account the assumed normal growth for non-specific loads, specific and

identified loads of 1 MW and above, and the effects of demand side management, if any, and energy

conservation.

3.4.4 The peak load requirements at each Connection Point/ Interface Point shall be estimated. The peak load

requirement at each Connection Point / Interface Point will essentially ensure that the Transmission

Utility or SLDC may determine the corrective measures to be taken to maintain the capacity adequacy in

the Transmission System up to the Connection Point /Interface Point. This will facilitate the Transmission

Utility (STU) to develop the compatible Transmission System. However, if the Distribution Licensee

receive power at a number of Connection Points / Interface Points in a compact area, which are

interconnected in a ring, then such Distribution Licensee shall forward the overall short-term Demand

forecast at each Connection Point / Interface Point with the variation or tolerance as mutually discussed

and agreed upon with the Transmission Utility.

3.4.5 The aggregate energy and peak load requirements for the Area of Supply shall be estimated. The

Distribution Licensee shall forward the short-term demand forecast for each Connection Point/ Interface

Point for peak load requirement as well as aggregate energy and peak load demand for Area of Supply

on annual basis to the Transmission Utility (STU) and Commission along with the following details on the

basis of which the forecast is made:

(a) Data,

(b) Methodology,

(c) Assumptions.

3.4.6 It shall be the responsibility of all the Distribution Licensees to fully co-operate with the Transmission

Licensees in preparation of demand forecasts for their area of supply. The Distribution Licensee shall

furnish the necessary peak load and energy forecasts to the Transmission Utility (STU) for a period

succeeding 5 years and submit the same annually by 31st March to STU in order to enable Transmission

46

THE GAZETTE OF INDIA : EXTRAORDINARY

[PART III—SEC.4]

Utility or SLDC in formulating the perspective plan, as detailed out in the applicable (State Grid Code)

Regulations, enforce.

3.4.7 The licensee shall supply whole system data to the transmission Utility (STU) and other distribution

system participants on the formats as devised by the STU under the applicable (State Grid Code)

Regulations, enforce.

3.5

Technical and Design Criteria

The Distribution Licensee shall plan and develop his Distribution System on the basis of the following

technical and design criteria:

1

The load demand of all the existing Users connected to the Distribution Licensee’s system and all Users

seeking connection with the Distribution Licensee’s system shall be taken into consideration. All the

Apparatus and Circuits shall have adequate capacity to cater to their needs of electricity in a safe,

economical and reliable manner.

2

The Distribution Licensee shall assess and forecast the load demand of each category of Consumers in his

Area of Supply on annual basis or more frequently as decided by the Commission.

3

The Distribution Licensee shall have a thorough knowledge of the nature of electricity usage by the

Consumers and the way they use electrical energy and other alternative sources of energy in his area. The

load forecasting shall take into account all these along with other conservation programs and the demand

side management or off-peak usage programs which the Licensee may sponsor, resulting in reduction of

energy used and peak demand of the Consumers over the years.

4

The Distribution Licensee shall implement an appropriate load forecast program for the systematic

collection of data describing Consumers' energy usage patterns and analysis of these data for energy and

demand forecast. For this purpose, the Consumers shall be divided into all the tariff categories and may be

broadly in the following classes:

(a) Domestic category;

(b) Non-Domestic category;

(c) Commercial category;

(d) Agricultural category;

(e) Industrial category; and

(f) Any other Tariff category as determined by the Commission in the Retail Supply Tariff Order.

The pattern of energy consumed by each sector and the load demand, the period of peak demand etc., shall

be determined on the basis of sample surveys taking representative samples from each sector for its

different seasonal requirements.

A suitable questionnaire shall be prepared for these sample surveys and the data obtained shall be

analyzed using suitable statistical models. Based on this, distribution licensee shall be implementing demand

side management techniques to match the availability from time to time.

5

The load forecast program shall assess the following:

(a) Demand at the time of system peak, daily, monthly, seasonal or annual,

(b) Hourly demand for the day of the system peak, monthly, seasonal or annual,

(c) Total energy consumption for each category by month, season or year.

6

Based on the results of the above analysis the load forecast shall be made using the appropriate modern

forecasting tools wherever applicable.

7

The optimum Circuit loading and the maximum number of Circuits at any electrical interface between the

Distribution and Transmission Systems shall conform to the Distribution System Planning and Security

Standards as mentioned under Chapter-4 of this code, Distribution System under Power System Management

and Operating Standard and Distribution System under Power System Safety Standard as prescribed by

authority under Electricity Act 2003.

8

As far as practicable, separate Circuits shall be provided for the following:

(a) Urban non-industrial power supply,

(b) Urban industrial power supply,

[भागIII—खण् ड 4]

भारत का रािपत्र : असाधारण

47

(c) Rural supply -: (i) Agricultural Supply, (ii) Non - Agricultural Supply

9

The loads shall be arranged as far as possible in discrete load blocks to facilitate load management during

emergency operations.

10

Load flow and other system studies shall be conducted to locate the position of outlets from substations,

capacitor installations, distribution transformers, and to contain voltage variation and energy losses within

reasonable limits.

11

The following parameters of equipment and system designs shall be standardized to facilitate easy replacement

and reduction of inventories of spares in stores:

(a) Capacities of power transformers,

(b) Capacities and designs of distribution transformers,

(c) Substation / Switching Station layouts,

(d) Pole mounted substations,

(e) Sizes of bus bars,

(f) Capacities and ratings of circuit breakers and instrument transformers,

(g) Earthing,

(h) Lightning arresters,

(i) Control panels,

(j) Station batteries,

(k) Fire extinguishers.

(l) Maintenance tools

(m) Safety equipment

(n) Energy meters

(o) Wires and accessories

(p) Insulators and accessories

12

The planning of the Distribution System shall always keep in view the cost effectiveness and reduction in

energy losses without sacrificing the requirements of Security Standards and Safety Standards for the

Distribution System.

13

The Distribution Licensee shall plan the Distribution System expansion and reinforcement keeping the

following in view along with all other measures to accommodate the advancement in technology prevailing at

the time:

(a) Economic ratio of HT and LT line lengths,

(b) Use of aerial bunched conductors,

(c) Underground cables,

(d) Optimizing the number of distribution transformers and their location at the electrical load centers.

3.6

Energy Audit

3.6.1 The Distribution Licensee shall create responsibility centers for energy audits. They shall compute the

month/year-wise distribution losses and prepare the energy balance sheets for their respective areas.

3.6.2 The Distribution Licensee shall establish and maintain a system for the segregation of technical and

commercial losses through energy audits. Interface meters with a data retaining capacity of at least 45

days shall be installed for all the incoming/outgoing feeders in the area identified for each such unit.

3.6.3 The Distribution Licensee shall carry an out energy audit of his total system compiling the data and

analysis carried out in each responsibility center in the best possible manner. The energy received from

each substation shall be measured at the 11 KV terminal switchgear of all the outgoing feeders installed

with appropriate energy meters such that the energy supplied to each feeder is accurately available. It

shall be compared with the corresponding figures of monthly energy sales and the distribution loss for

each feeder shall be worked out. In case the Distribution Licensee has adopted the ring main system at

11KV and there is difficulty in determining the distribution losses for each feeder, then the Distribution

48

THE GAZETTE OF INDIA : EXTRAORDINARY

[PART III—SEC.4]

Licensee shall work out distribution losses for the overall Area of Supply.

3.6.4 An action plan for the reduction of losses with adequate investments and suitable improvements in

governance shall be drawn up and shall be submitted to the Commission annually with the Annual

Revenue Requirement filing. The distribution licensee shall follow the provisions given under “The

Bureau of energy efficiency (Manner and Intervals for the Conduct of Energy Audit in Electricity

Distribution Companies) Regulations, 2021, and its amendments for conducting energy audits in regular

intervals and submit the necessary reports to the Commission.

CHAPTER-4 DISTRIBUTION SYSTEM PLANNING AND SECURITY STANDARD

4.1

Objective

The Distribution System Planning and Security Standard specifies the guidelines for the planning methodology

of the Distribution System. The scope of this standard covers:

(a) Quality of power supply

(b) Load forecast

(c) Planning procedure.

(d) Service area of a distribution network.

(e) Planning standards.

(f) Reliability analysis.

(g) Standardization of design of distribution transformer

(h) Standardization of substation layouts

(i) Reactive Compensation

(j) Service Mains

(k) Metering Cubicles

(l) Security Standards

4.2

Quality of power supply

(a) Frequency: The rated frequency shall be 50 Hz. All the constituents of the Power System shall make all

possible efforts to ensure that the grid frequency remains within the bandwidth of 49.9Hz -50.05 Hz or

as notified by the CERC through amendments in the Indian Electricity Grid Code.

(b) Voltage: - The voltage at any point of the system under normal operating conditions shall not depart

from the declared voltage by more than the values specified under IS Specifications.

(c) Harmonic content: - As per IEEE recommendations, the total harmonic content in the supply voltage

for sensitive loads shall not exceed 5 percent, with any single harmonic content not exceeding 3 percent.

The respective User responsible for generating harmonics and affecting the distribution system shall be

responsible for corrective action.

4.3

Load Forecast

4.3.1 The Distribution Licensee shall prepare a rolling short-term load forecast annually for a period of five years

in his Area of Supply duly estimating the probable load growth and the consumption pattern of the

Consumers. The forecast thus made shall be updated every year depending on the actual load that has

come in that year and the changes in assumption, if any, required for the next years.

4.3.2 Preliminary Load Estimation/Assessment:

(a) Domestic and Commercial Loads: The consumption in domestic and commercial sectors shall be

estimated on the basis of the number of Consumers and their specific consumption. The past growth rate

in the number of Consumers in the area shall be studied. In cases where power shortages have been

experienced in the recent past, the growth rate to be adopted shall take into consideration the appropriate

demand-making due allowance in the growth rate to account for the increased tempo of household

electrification envisaged in the future. The higher level of electrification planned in the area should be

kept in view. Energy consumption per Consumer shall be estimated after studying past trends and taking

into account the anticipated improvements in the standard of living.

(b) Public Lighting and Water Works: The estimates of electricity consumption in public lighting and water

works shall be based on the average consumption per kilowatt of connected load, projected on the basis

[भागIII—खण् ड 4]

भारत का रािपत्र : असाधारण

49

of trends, keeping in mind the likely increase in public lighting and water supply facilities. The number

of hours of operation shall be estimated taking into account the past trends and the power cuts if any

affected the area.

(c) Agricultural Loads: The power requirement for irrigation pump sets shall be based on the program of

energization of pump sets in the plan period, available resources, and the ultimate ground water potential.

The average capacity of pump sets shall be worked out considering the mid-year figures for connected load

and the number of pump sets. The consumption per IP set per year shall be estimated by means of

representative sample studies till all the IP sets are metered.

(d) Industrial Loads: The power requirements for the industrial sector shall be estimated under the

following three categories, viz.

(i)

L.T. Industries;

(ii) H.T. Industries with a demand of less than 1 MW;

(iii) H.T. Industries with a demand of 1 MW & above.

The consumption in category (i) & (ii) shall be on the basis of historical data duly considering the

developments in future. In case of category (iii), the projection shall be made separately for each

industrial unit on the basis of the information furnished by the industrialists and the Department of

Industries.

(e) Non-industrial Bulk Supply: The available data regarding the consumption of bulk supply to non-

industrial Consumers such as research establishments, port trusts, military engineering services, supply

to power projects etc., and the probable future developments in these areas, shall be considered for the

forecast.

(f) Other Loads: For other loads, the projections shall be based on the best Judgment.

4.4

Load Forecast Procedure

4.4.1 Load forecasting methods using the above data and relevant indices by adopting one of the suitable

methods applicable to specific locations and prevailing conditions shall be adopted.

4.4.2 In addition to the above, the effects of demand side management, requirement of power for pending

applications, the increase in demand due to improvement in the operating frequency close to 50 Hz shall

also be estimated. The Distribution Licensee shall work out Peak Demand for each of the succeeding five

years relating to Connection Point/ Interface Point with the Transmission System as well as the annual

Energy Demand and Peak Demand for each of the succeeding five years for overall Area of Supply on the

basis of Load forecast. However, if the Distribution Licensee receive power at a number of Connection

Points / Interface Points in a compact area, which are interconnected in a ring, then such Distribution

Licensee shall forward the overall short-term Demand forecast at each Connection Point / Interface Point

with the variation or tolerance as mutually discussed and agreed upon with the Transmission Utility or

SLDC.

4.4.3 The diversity factor of each category of Consumers fed in the Area of Supply shall be worked out by

installation of load survey meters at selected typical locations. A record of such data shall be maintained

and continuously updated. The short-term load forecast for a period of five years, based on these data shall

be prepared.

4.5

Planning Procedure

The Distribution System shall be planned and developed in such a way that the system should be capable

of catering the requirement of all categories of Consumers with a safe, reliable, economical and quality

supply of electricity as indicated in clause 2.0 of this section. However, the Consumer shall extend full

support to the Distribution Licensee to enable the Distribution Licensee for quality supply of electricity.

The Distribution System shall conform to the statutory requirements of all the relevant code, standards

and acts in force.

4.6

Planning Standards

4.6.1 Standardization of Sizes and Ratings: Adequate provision for future load development shall be made while

selecting the sizes of power conductors and rating of distribution transformers. The sizes of power

conductors, insulators, lightning arresters, transformers, switchgear, etc. used in the Distribution System

shall be standardized with the objective of reducing inventory and standard specifications shall be

prepared.

50

THE GAZETTE OF INDIA : EXTRAORDINARY

[PART III—SEC.4]

4.6.2 Design Criteria for Distribution Lines

1. Radial system of distribution can be adopted in rural areas and as far as possible loop system with

provision for feeding from at least one alternate source shall be adopted in urban areas.

2. The HT and LT distribution lines shall be any of the following types according to the necessity at the

required area.

a)

Over-head line with bare conductors;

b)

Over-head line with Aerial Bunched Cables;

c)

Under-ground Cables.

3. In thickly populated cities, in areas having heavy traffic densities, underground cable installation shall be

considered to the extent possible. Wherever a number of trees are encountered, either in residential

locations or in gardens and forests, over-headlines with aerial bunched cables shall be adopted. In other

places over- headlines with bare conductors shall be adopted. The following standards shall be adopted

for planning and design purposes:

a)

The design and construction of over-headlines with bare conductors shall be generally in

accordance with IS 5613 Part I, sections 1 and 2.

b)

Vertical configuration of conductors for LT distribution lines, to prevent accidental short circuit

due to galloping of conductors, shall preferably be adopted in rural areas since the spans are large in

such areas.

c)

The maximum length of LT and HT lines shall be maintained within the prescribed limit so as a

safe and quality power may be delivered.

d)

The design and construction of over-headlines with aerial bunched cables shall be generally in

accordance with REC Specifications 32 and IS 14255.

e)

The design and construction of under-ground cables shall be generally in accordance with IS 1255.

4. The line supports can be of steel, wood, RCC or PCC. The RCC and PCC poles are preferred over the

other two considering their cost and longer life. The choice of the size of conductor for a line shall be

made based on the following criteria:

a)

Power to be transmitted and the techno-economic studies conducted for selecting the size of

conductor according to the cost of loss of power and the interest and depreciation charges on the

cost of the conductor thus selected;

b)

Length of Line;

c)

Line Voltage;

d)

Permissible voltage regulation;

e)

Mechanical strength;

4.6.3 Standardization of Design and Rating of Distribution Transformers

1.

The design and rating of distribution transformers shall be standardized. As an initial step, the various

technical parameters required for the design shall be incorporated in the specifications based on the

experience on performance gained among the various designs so far adopted. Later, standard designs of

the transformers and their detailed construction drawings shall be evolved based on the performance of

these transformers. These shall be adopted for future procurement. This also ensures the inter-

changeability of components of similar transformers manufactured by any manufacturer.

2.

A good quality assurance plan shall be aimed at the following:

a) Good quality of raw materials;

b) Quality control during manufacturing and routine tests;

c) Acceptance tests at the time of taking delivery;

d) Inspection and tests on transformers received at stores on random sampling;

e) Thorough test on one transformer in a lot selected at random. The transformer should be completely

dismantled. The qualities of core, coil, insulation etc. are physically inspected and samples of insulation and

other components used etc., are tested.

f) Ensuring performance guarantee for all distribution transformers for a minimum period of 3 years.

[भागIII—खण् ड 4]

भारत का रािपत्र : असाधारण

51

4.6.4 Standardization of Sub-Station Layouts

The Distribution Licensee shall develop standard layouts following relevant standards, manuals, and

provisions of the Electricity Act, 2003. The Licensee shall also adopt the latest technology as well as

feedback from the experience gained.

4.6.5 Reactive Compensation

1.

Shunt capacitors un-switched/switched type, shall be installed at the appropriate places in the Distribution

System for power factor improvement, maintaining a satisfactory voltage profile, and reduction of sub-

transmission and Distribution losses. The size and location of the capacitor installations shall be

determined using an appropriate program, with reliable field data. Suitable precautionary measures, such

as automatic switching, etc, shall be adopted to avoid over voltage at light load periods.

2.

Optimization studies of shunt compensation shall be conducted by the Distribution Licensee to determine

the most appropriate sizes and locations for shunt capacitor installations.

4.6.6 Service Area of a Distribution Network

1.

The service area of a distribution network is an area in which the load is supplied by a substation by one or

more number of feeders, as required. The distribution network fed from the distribution transformers and

the substations from which the 11 kV feeders emanate shall be initially planned as independent networks

within their respective service areas. Further, wherever possible, provision shall be made for

interconnection with adjacent networks and/or substations for an alternate supply in case of failure. The

design of distribution lines shall incorporate features to enable their augmentation in future, with

minimum interruption to power supply. The existing right of way shall be fully exploited.

2.

The Distribution Licensee shall take suitable measures, sufficiently in advance, to augment the capacity of

the feeders in the event the voltage regulation limit is exceeded within the area.

3.

Appropriate software to compute the design of the distribution network shall be used to obtain lowest

possible energy losses for different loading conditions for the following:

a) The location and the capacity of the distribution transformers;

b) Routing of LV and HV networks;

c) The sizes of conductors;

d) The ratio of the lengths of HT and LT distribution lines for the new lines planned shall be optimized and

the existing Distribution System shall be modified in a phased manner to reduce the distribution losses.

e) The voltage regulation limits for all loading conditions.

4.6.7 Service Mains

The service mains to Consumers shall be laid in accordance with relevant REC Construction Standards for 230 V

single phase and 400 V three phase supply and shall conform to the provisions of Relevant Rules under

Electricity Act, 2003.

4.6.8 Metering Cubicles

1.

The metering for 230 V single-phase supply shall be provided on a suitable board, located in such a place

protected from sun and rain and shall be in a convenient position for taking readings. The terminals of the

meter shall be made tamper-proof and sealed. For 400 Volts three phase supply, the meters and associated

metering equipment including connections shall be enclosed in a suitable tamper-proof box. The tamper-

proof box shall be of sufficient strength and design with locking and sealing devices and shall have

adequate provision for heat dissipation with the required electrical clearances. The design shall permit

readings to be taken without access to the meter or its connections.

2.

For HT Consumers the meters, maximum demand indicators, and secondary connections, shall be housed

in a separate compartment and other secondary apparatus such as instrument transformers and

connections required shall be housed in a separate metering compartment, which shall be locked / sealed

to prevent tampering.

3.

The HT metering cubicle shall be suitable for cable entry on both sides or at least on one side. No fuses

are permitted in the secondary circuits of the instrument transformers. The metering cubicle shall be

painted with suitable epoxy paint for installation in areas experiencing heavy rainfall. The instrument

transformers shall be of fixed ratio and shall not have any taps. The primary current rating of the current

transformers shall match with the normal full load current and the saturation point of the core shall be

higher than the maximum current that may occur due to simultaneous full load operation of all the

52

THE GAZETTE OF INDIA : EXTRAORDINARY

[PART III—SEC.4]

connected equipment and machinery.

4.

For EHT Consumers, the secondary terminals of the instrument transformers shall be locked and sealed

and the secondary wires brought out in a suitable GI conduit pipe up to the metering panel. There shall be

no joints in the conduit pipes. The meters shall be as close to the instrument transformers as possible and

in no case shall exceed ten (10) meters. The metering panel shall be housed in a weather proof and tamper

proof box and sealed.

4.7

Reliability Analysis

4.7.1. The planning of the extension and improvement to a Distribution System shall also take into consideration

the improvement in reliability of power supply to Consumers. The appropriate reliability indices of power

supply in the area fed by the Distribution System before and after the implementation of the extension and

improvement program shall be estimated. The planning of the distribution system shall also take into

consideration the improvement in reliability and efforts should be made to collect the data in this regard.

4.7.2. The provisions of the Joint Electricity Regulatory Commission for The UT of Jammu & Kashmir and the

UT of Ladakh (Standard of Performance for Distribution Licensees) Regulations, 2023 as amended from

time to time for determining the Reliability indices of power supply to the Consumers shall be adhered to

by the licensees.

4.7.3. The following factors, which affect reliability indices, shall be considered subject to availability of data:

(a) Momentary incoming supply failures

(b) Momentary interruptions on 33 and 11 kV feeders

(c) Feeder wise affected consumers

(d) Breakdown on LT feeders

(e) Prearranged shutdowns on lines and feeders

(f) Blowing out of distribution transformer fuses

(g) Individual fuse off calls

4.8

Standing committee for design, construction and maintenance practices

4.8.1. Standing Committee for design, construction and maintenance practices shall under the chairmanship of

the Technical Member/Director of the licensee be constituted by the licensee, within one-month w.e.f. the

commencement of this Code and shall comprise of-

(a) the senior most Engineer (Planning) of the licensee

(b) the senior most Engineer (Materials Management) of the licensee

(c) the senior most Engineer (Design and Planning) of the STU; and

(d) any other person as the licensee may deem appropriate.

4.8.2. The Standing Committee shall be an advisory body having perpetual term and shall hold its meeting at

least once in each quarter. The Standing Committee shall suggest and make recommendations to the

licensee on matters amongst others in the following areas: -

(a) to review and suggest the latest practices on design and technical specifications of line materials, meters

and metering equipment, service line materials, sub-station equipment like transformers, circuit

breakers, CT/PT sets etc.;

(b) to suggest vendor selection and short-listing procedures for various equipment and materials being used

in bulk;

(c) to suggest best industry practices and innovative techniques for construction, operation, and

maintenance of HT / LT lines and Grid Substations, Pole mounted and other plinth-mounted sub-

stations etc.;

(d) to recommend and suggest the latest technology upgradation and process such as IT tools and SCADA

and other Control System;

(e) to recommend embargo and restrictions on dangerous, unhygienic practices and material from point of

view of safety, environmental upkeep and pollution norms.

4.9

Security Standards

4.9.1. The Distribution System shall be planned and maintained so as to fulfill the following security standards

[भागIII—खण् ड 4]

भारत का रािपत्र : असाधारण

53

except under Force Majeure conditions beyond the reasonable control of the Distribution Licensee.

4.9.2. The feeders, either HT or LT, feeding important loads such as hospitals, crematoria, airports, railway

stations, and the like shall be planned to have a selective switching system, so that selective switching can

be operated to transfer the load on to an alternate healthy feeder. Appropriate safety precautions shall

invariably be taken in this regard. In case of failure of the feeder, these switches shall be operated

immediately either manually or automatically depending on the importance of the load.

4.9.3. The feeders connected to important industries which are very sensitive to interruption of even short

duration shall be planned to have automatic switchover to an alternate healthy feeder in case of failure of

supply.

4.9.4. Loading in any current carrying component of the Distribution System (e.g., Conductors, joints,

transformers, switchgear, cables and other apparatus) shall not exceed 75% of their respective thermal

limit.

4.9.5. The rupturing capacity of the switchgear employed in the system shall have at least 25% more capacity

than the short circuit level computed even considering the anticipated future development of the system.

4.9.6. Provision shall be made for every HT feeder, either primary or secondary, to manually switch over to the

immediately available HT feeder of the same voltage class available in the vicinity. Provision shall be

made in the design itself for any HT feeder to share at least 50% of the loads in the adjacent feeder during

emergencies.

4.9.7. In case of single contingency; failure of any substation equipment controlling any outgoing 11 kV feeder,

the load interrupted shall not generally exceed 50% of the total demand on the substation. The Distribution

Licensee has to bring it down to 20% within a period of three years.

4.9.8. There shall be adequate stand by capacity in the system.

4.9.9. The design of the Distribution System shall accommodate the arrangements in such a way that the

electricity supply need not be interrupted for more than the specified duration as per Joint Electricity

Regulatory Commission for The UT of Jammu & Kashmir and the UT of Ladakh (Standard of

Performance for Distribution Licensees) Regulations, 2023 as amended from time to time of the Licensee

in case of breakdown of any distribution transformer. Similarly, in case of failure of 11 kV feeders

including terminal equipment, the design shall accommodate an arrangement for the power supply not to

be interrupted to the extent possible.

4.10

Construction Practices

4.10.1. All electric supply lines and apparatus shall be of sufficient ratings for power, insulation and estimated

fault current and of sufficient mechanical strength, for the duty, which may be required to be performed

under the environmental conditions of installation, and shall be constructed, installed, protected, worked

and maintained in such a manner as to ensure the safety of human beings, animals and property.

4.10.2. The relevant Code of Practices of the Bureau of Indian Standards, REC Standard, including the National

Electrical Code, if any, may be followed. The material and apparatus used shall conform to the relevant

specification of the Bureau of Indian Standards where such specifications have been already laid.

4.10.3. The licensee and the User shall prepare and observe the Construction and Maintenance Manuals for

various equipment/works for HT / LT Lines and Grid / Switching sub-stations. The Construction and

Maintenance Manual shall be prepared to take into consideration the following:

(a)

Technical Standards for construction of electrical plants, electric lines, and connectivity to the grid

specified by the Central Electricity Authority under Clause (b) of section 73 of the Electricity Act

2003;

(b)

Safety requirements for construction, operation, and maintenance of electrical plants and electric lines

specified by the Central Electricity Authority under Clause (c) of section 73 of the Act;

(c)

REC Construction Standards and Standard Design Layouts;

(d)

CBIP Publications on Code of Practices;

(e)

Code of Practices issued by the Bureau of Indian Standards for various equipment and maintenance

practices; and

(f)

Instruction Manuals for installation, operation, and maintenance issued by the standard equipment

manufacturer concerned.

4.10.4. The standard tables for conductor size, fuse size, wire gauge, electrical clearance, ground wire size,

54

THE GAZETTE OF INDIA : EXTRAORDINARY

[PART III—SEC.4]

insulation resistance and earth resistively etc. shall be included in the Construction and Maintenance

Manuals. The licensee shall ensure that its construction and maintenance staff strictly observe these

Manuals. The copy of Construction and Maintenance Manuals shall be furnished to the Commission.

4.11

Preventive Maintenance Schedule and Inspection Manual

4.11.1. The licensee and the User shall prepare a Preventative Maintenance Schedule and Inspection Manual for

various line and sub-station equipment installed in distribution system.

4.11.2. The Preventive Maintenance Schedule and Inspection Manual shall cover the following: -

(a)

Recommended Schedule for inspection;

(b)

Recommended Schedule for preventive maintenance; and

(c)

Recommended Schedule for overhauling.

4.11.3. The inspection schedule and preventive maintenance schedule shall have daily, weekly, monthly,

quarterly and annual periodic activity, to be carried out for various equipment.

4.12

Maintenance Records

4.12.1. The licensee as User shall maintain records of periodic inspections carried out in the standard formats

prescribed in the Preventive Maintenance Schedule and Inspection Manual.

4.12.2. Periodic testing of all the equipment such as transformers, switchgear, protective relays, etc., should be

carried out as recommended by the manufacturer and the relevant Code of Practices issued by the Bureau

of Indian Standards and the CBIP. These shall be carried out at fixed intervals and the test results shall be

recorded in the maintenance registers. Wherever the test results indicate a decline in the insulation

resistance and/or deterioration of the equipment, preventive maintenance shall be carried out to ensure

serviceability, safety, and efficiency.

4.12.3. The licensee shall maintain well-trained hot-line maintenance personnel with all the required tools in

good condition and conduct maintenance work by using the hot-line technique, wherever possible, to

reduce period of interruption.

4.12.4. The consumers shall maintain their apparatus and power lines at all times conforming to the Electricity

Rules, and these shall be suitable for connection to the distribution system in a safe and reliable manner.

4.13

Energy Conservation

4.13.1. The licensee, in order to minimize the overall requirement, energy conservation and Demand Side

Management (DSM), shall accord high priority to ensure compliance with the Energy Conservation Act,

2001 and shall adhere to the guidelines of the Bureau of Energy Efficiency along with the provisions of

the applicable (Demand Side Management) Regulations, enforce.

4.13.2. The licensee shall ensure that the periodic energy audits, wherever made compulsory for power-intensive

industries under the Energy Conservation Act, 2001 are complied with by its consumers. Other industrial

consumers may also be encouraged to adopt energy audits and energy conservation measures.

4.13.3. In the agriculture sector the licensee shall promote the pump sets and the water delivery system

engineered for high efficiency. In the industrial sector, the licensee shall take action for promoting

energy-efficient technologies as energy conservation measures. Motors and drive systems are the major

sources of high consumption in the agricultural and industrial sectors. The licensee shall encourage the

consumers use high-efficiency motors in the agricultural and industrial sectors. The licensee shall take

effective steps so that energy-efficient lighting technologies are adopted in industries, commercial and

domestic establishments.

CHAPTER – 5 CONNECTIVITY CONDITIONS

5.1

Objectives

The Connectivity Conditions are provided to ensure that:

a) The basic rules for connections are compiled by all agencies. This will help to treat all agencies in a non-

discriminatory manner.

b) Any new or modified connection, when established, shall not suffer unacceptable effects due to its

connection to the Distribution System nor produce unacceptable effects on the system or any other

connected agency.

c) The ownership and responsibility for all the equipment shall be clearly specified in a schedule (site

responsibility schedule) for every site, where a connection is made.

[भागIII—खण् ड 4]

भारत का रािपत्र : असाधारण

55

d) The Connectivity Conditions specify the minimum technical and design criteria, which shall be

complied with any agency connected to, or seeking connection to the Distribution System. The

Distribution Licensee shall ensure compliance of the above criteria by any agency as a pre-requisite for

the establishment of an agreed connection. The connectivity conditions should fulfill the requirement

stipulated in sections 50 and 53 of the Electricity Act, 2003, and provisions of the Joint Electricity

Regulatory Commission for the UT of Jammu & Kashmir and the UT of Ladakh (Electricity Supply

Code) Regulations, 2023.

5.2

Operational Labeling

The Licensee and the Consumers shall be responsible for the provision and maintenance of clear,

unambiguous signs and labels indicating the numbering and / or name of the equipment/apparatus and

circuit at the substations and connection sites. The equipment installed shall confirm to its relevant I.S

specification and the ratings and salient specification shall be maintained on the equipment’s nameplate.

No electrical equipment shall be used without its manufacturer’s nameplate permanently affixed to it. In

the event of such discrepancies observed, the same shall be treated as per the pertinent section of the

Electricity Act, 2003.

5.3

System Performance

5.3.1 The design and construction of all the equipment connected to the Distribution System shall satisfy the

relevant Indian Standard Specifications. In case of equipment for which the Indian Standard

Specifications do not exist, the appropriate IEC, IEEE or other International Standards shall apply.

5.3.2 Installation of all electrical equipment shall comply with the rules and code of practice in force.

5.3.3 For every new connection sought, the Distribution Licensee shall specify the Connection Point/ Interface

Point and the supply voltage, along with the metering and protection requirements as specified in the

"Metering and Protection code" under section – 7 of this code.

5.3.4 The operation of the Distribution System shall be in accordance with the "Distribution System Operating

Standard" under Power System Management & Operation Standard as prescribed by authority under the

Electricity Act 2003. The User shall however be subjected to the distribution discipline prescribed by the

SLDC/Distribution Licensee.

5.3.5 The insulation co-ordination of the User’s equipment shall conform to the applicable Indian

Standards/Code of practices. The rupturing capacity of the switchgear shall not be less than that notified

by the Distribution Licensee.

5.4

Connection Point/ Interface Point

5.4.1 Connection to Transmission System shall be governed by the relevant clauses of the Central / State Grid

Code as the case may be.

5.4.2 Connection of Small Generators (not below 1MW) to the Distribution Systems: - Bus bars may be

provided at the Generating station. All generating units shall inject the output into the bus bars via the

synchronizing breaker. The isolator between the synchronizing breaker and the bus bars is the boundary

between the Generator and the Distribution Licensee. The current transformers for the metering shall be

connected near the synchronizing breaker. The voltage transformers (including the standby set) of the

metering shall be connected to the bus-bars. However, the small generators based on renewable sources of

energy will be allowed for the connection with Distribution System/ Transmission System as feasible and

decided by the Commission on a case-to-case basis.

5.4.3 EHT/HT Consumers: The supply voltage may be 220kV, 132kV, 66kV, 33 kV, 22 kV, or 11 kV or the

voltage as agreed by the Distribution Licensee. The substations shall be owned by the Users. The

boundary shall be the feeder entry in the premises of the Users or when so provided it shall be the bus-bar

between breakers of the Distribution Licensee and the EHT/ HT Consumers.

5.4.4 Low voltage and Medium Voltage Consumers: The incoming terminal of the cut-out circuit breaker

installed by the Consumer is the boundary of low-voltage and medium-voltage Consumers. The metering

shall be provided before a fuse unit/circuit breaker of the Consumer. The metering equipment shall be

provided at the entry point of Consumer Premises in a safe location, preferably at the entry of the

Premises or in a common passage on the ground floor for easy access for the purpose of meter reading,

maintenance, repairs, inspection, etc. The metering equipment shall be provided inside a box sealed by

the Distribution Licensee and the User/Consumer shall not disturb the sealed metering equipment and

shall take reasonable care for protecting the meter and equipment.

56

THE GAZETTE OF INDIA : EXTRAORDINARY

[PART III—SEC.4]

5.5

Procedure for Applications for Connections to The System

Any User seeking use of Distribution System may submit an application for connection to the Licensee as per

the procedures and formats prescribed under the Joint Electricity Regulatory Commission for the UT of

Jammu & Kashmir and the UT of Ladakh (Electricity Supply Code) Regulations 2023. Prospective large

customers may enclose information as per Annexure – 1.

5.6

Acceptance or Rejection of Application for Connection

The acceptance or rejection of Consumer’s application for supply connection shall be as per the provisions of the

Joint Electricity Regulatory Commission for the UT of Jammu & Kashmir and the UT of Ladakh

(Electricity Supply Code) Regulations 2023.

5.7

Connection Agreements

A connection Agreement of Consumer shall be as per provisions of the Joint Electricity Regulatory Commission for

the UT of Jammu & Kashmir and the UT of Ladakh (Electricity Supply Code) Regulations, 2023.

CHAPTER – 6: OPERATION CODE

6.1

Objectives

6.1.1 This Chapter contains the procedures and practices to be followed for a safe and efficient operation of the

Distribution System by the Distribution Licensee and by the Users of the Distribution System of their

electrical plant and lines which are connected to the Distribution Licensee’s system. This shall also apply

to any electrical interface between two Distribution Licensee’s for a safe and efficient operation of

interface.

6.1.2 The following aspects of operation are covered in this section:

(a) Demand Estimation

(b) Outage Planning

(c) Contingency Planning

(d) Demand Side Management

(e) Interface with Small Generating Plant including CPPs

(f) Operational Communication

(g) Monitoring and Control of voltage, frequency and power factor.

(h) Safety Co-ordination.

(i) Maintenance and testing

(j) Tools and spares

(k) Human Resource Development and Training

(l) Geographical Information System (GIS)/Global Positioning System (GPS) based information system

6.2

Demand Estimation

6.2.1 The Distribution Licensee shall estimate the Demand and Energy requirement in 15-minute time blocks at

the Transmission-Distribution Interface Points on a day-ahead/week-ahead/month-ahead basis for their

Area of Supply on the basis of relevant load curves drawn on day ahead basis subject to modifications

depending upon the communication received from any specific User or caused by any contingency. This

may be given to SLDC as may be required.

6.2.2 For this purpose, the concerned major Users identified by the Distribution Licensee shall furnish the required

data pertaining to the demands of their installation to him.

6.3

Outage Planning

6.3.1 The Distribution Licensee shall furnish his proposed outage programs to the Transmission Licensee on a

month-ahead basis.

6.3.2 The outage program shall contain the identification of lines and equipment of the Distribution System

proposed by the Licensee.

6.3.3 The outage plan proposed by the Licensee shall come into effect only after the Transmission Licensee

releases the finally agreed transmission outage plan.

[भागIII—खण् ड 4]

भारत का रािपत्र : असाधारण

57

6.3.4 However, at the time the line or equipment is taken out of service, the Distribution Licensee shall intimate

the Transmission Licensee to facilitate in accommodating their maintenance work, which can be carried

out under minimum shutdown period.

6.3.5 The above procedure shall not apply under the following circumstances:

a) ‘Emergency situations’ to save plant and machinery;

b) In case of unforeseen emergency situations requiring isolation of lines or equipment to save human life,

c) Where disconnection is to be effected on any User installation due to breach of Agreement. In this case,

the SLDC shall be informed wherever the load to the extent of 1 MW or more is affected.

6.3.6 Planned outages of the Power System for the duration as specified in the Joint Electricity Regulatory

Commission for the UT of Jammu & Kashmir and the UT of Ladakh (Standard of Performance for

Distribution Licensees) Regulations 2023 for maintenance purposes shall be intimated to the public

through media including publishing in at least two largely circulated newspapers (one in English and one

in local language) of that area, two days in advance.

6.4

Contingency Planning & Crisis Management

6.4.1 A contingency situation may arise in the event of a total or partial blackout in the Transmission System. A

contingency may also arise on a part of the Distribution System due to local breakdowns in the

Distribution System itself. It may also arise due to a breakdown in the Apparatus of the Transmission

Licensee at the point of interconnection.

6.4.2 Contingency Planning & Crisis Management procedure shall be documented unambiguously to achieve

restoration of the total system and associated demand and re-synchronization of parts of the total system that

came out of synchronism with each other, at the shortest possible time.

6.4.3 Transmission System Failure:

a) In case of a total blackout at any point in the Area of Supply of the Distribution Licensee, the

Distribution Licensee shall follow the black start procedures framed by the Transmission Utility

(STU)/SLDC.

b) The Distribution Licensee shall sectionalize the Distribution System into discrete blocks of demand. The

Licensee shall advise and co-operate with the SLDC for the amount of MW load likely to be picked up

on switching each demand block.

c) The Distribution Licensee shall prepare a schedule of essential and non- essential loads in order of

priority at each connection to be picked up during the restoration process.

d) The Distribution Licensee shall ensure and maintain the load generation balance under the direction of

the SLDC.

e) The Distribution Licensee shall maintain direct communication links with the SLDC.

f) The Distribution Licensee shall furnish the names and designations of the person(s) with their telephone

numbers, e-mail IDs, and stations, authorized to deal with contingency operations, to the SLDC, who

shall co-ordinate for restoration process as per State/ Central Grid Code/ Regulations of the Commission

as the case may be.

6.4.4 Distribution System Failure:

a) Interruptions to the power supply in any part of the Distribution System lasting for the period as specified

in the Joint Electricity Regulatory Commission for the UT of Jammu & Kashmir and the UT of Ladakh

(Standard of Performance for Distribution Licensees) Regulations 2023 and amendments thereof for

Licensee due to breakdown in any part of the Distribution System may be termed as a Distribution

System Failure.

b) The Distribution Licensee shall co-ordinate with SLDC for the restoration process, which shall be as per

provisions of the applicable (State Grid Code) Regulations, enforce and amendments thereof.

c) The Distribution Licensee shall designate a Nodal Officer to coordinate with SLDC for Distribution

System restoration.

6.4.5 Failure of the Apparatus of the Transmission Licensee:

a) The Distribution Licensee shall immediately contact the authorized person at the substation of the

Transmission Licensee, and assess the probable period of restoration and the probable restriction of load

drawl from the affected substation.

58

THE GAZETTE OF INDIA : EXTRAORDINARY

[PART III—SEC.4]

b) The Distribution Licensee shall affect the demand management plan accordingly.

6.5

Demand Side Management (DSM)

6.5.1 DSM should be made an integral part of the day-to-day operations of the Distribution Licensee with the

objective of improving end-use efficiency in the use of electricity, environmental conservation, and cost

reduction.

6.5.2 Promote and implement Load Shifting, Power Shortage Mitigation, seasonal peak reduction, cost-

effective energy savings, lowering the cost of electricity, reduction in emissions of greenhouse gases, and

pricing initiatives i.e., Time of Use / Seasonal, etc.

6.5.3 Complement supply-side strategies in order to avoid, reduce or postpone unnecessary investments in

generation, transmission, and distribution infrastructure.

6.5.4 Reduction of transmission and distribution losses through implementation of end-use energy efficiency

programs in areas reporting high AT&C losses.

6.5.5 Reduce the environmental damage by reducing the emission of greenhouse gases.

6.5.6 Encourage consumers to revise their electricity consumption pattern both with respect to timing and level

of electricity demand for efficient use of energy.

6.5.7 Create awareness about Solar Pumps, Solar Lights, LED lamps etc.

6.5.8 DSM Plan and Program preparation, submission and approval by the Commission:

(a) Distribution Licensee shall formulate a perspective DSM Plan and submit the same to the Commission

for in-principal approval for the specified period and as per the time lines that may be specified by the

Commission from time to time;

(b) The perspective DSM plan shall include:

(i)

A section outlining the goals sought to be achieved in the specified period.

(ii) Annual DSM Plan for each year of the perspective plan period containing description of DSM

program proposed to be undertaken and its prioritization along with program wise details like:

1.

indicative cost & its cost effectiveness pursuant to these Regulations and any guidelines issued by the

Commission from time to time;

2.

indicative baseline data and expected reduction in tariff and/or gain in energy efficiency;

3.

consumer segments and estimated level of participation;

4.

implementation strategy and schedule including process / mechanism for execution e.g., Energy

Service Companies, Bidding for DSM Projects, DSM Resource Acquisition, etc.;

5.

expected payback period and mechanism for recovery of cost and performance incentives;

(c) Mechanism for Monitoring, evaluation and reporting of perspective plan and annual plan/programs;

(d) Programme/Plan for Training/Seminars/Workshops to increase consumer awareness.

6.6

Interfaces with Small Generating Units Including CPPs

If the Distribution Licensee has an interface with any generating unit including CPP and an Agreement for this

purpose exists, the Distribution Licensee and the concerned owner of the generating unit shall abide by

the following provisions in addition to the provisions contained in this Code as applicable to all the Users:

a) The owner shall provide suitable protection at the interface to protect his system from any damage due

to normal and abnormal conditions in the Distribution System.

b) In case of induction generator, the owner shall take adequate precautions to limit the system

disturbances, when the induction generator is synchronized in consent with the Distribution Licensee.

Induction generators shall be installed with adequate capacitors to compensate the reactive power drawl.

Also, whenever the power factor is found very low during starting period and causes a voltage dip in the

Licensee’s system the Licensee may advise the owner to install capacitors and the owner shall comply.

Failure to comply entails penalty and/or disconnection from the system as per provision of rules and

Acts.

c) The owner shall comply with the provisions of the (State / Central) Grid Code Regulations of the

Commission as the case may be.

[भागIII—खण् ड 4]

भारत का रािपत्र : असाधारण

59

6.7

Operational Communication

Reliable communication links viz telephone, email, fax, tele printer, etc. shall be established for the exchange

of data, information, and operating instructions between the Licensee, Consumer with a demand of 1 MW

and above, and the SLDC. Each constituent shall ensure installation and maintenance of proper

communication infrastructure at his end.

6.8

Monitoring and Control of Voltage, Frequency and Power Factor

6.8.1 The Distribution Licensee shall monitor the voltage, frequency, and power factors in the Distribution

System at different points at peak and off-peak hours and take reasonable measures for improvement of

the same in coordination with the Users with the demand of 1 MW and above, and the Transmission

Licensee.

6.8.2 The Distribution Licensee shall take power factor improvement measures at strategic points in the

Distribution System by carrying out system studies and installing the required reactive compensation

equipment.

6.8.3 The voltage in the Distribution System may vary depending upon the available generation, system

demand, and the configuration of Transmission and Distribution Systems at any time. Under normal

operating conditions the Licensee shall exercise proper voltage management in the Distribution System

beyond the point of connection with the Transmission System to maintain voltage at all levels according

to the quality of supply mentioned in the Distribution System Planning and Security Standard as

mentioned under Chapter-4 of this code. The capacitors, wherever available in the Grid substations shall

be operated to maintain reactive compensation to be within acceptable limits of power factor of at least

0.9 keeping the bus voltage in view.

6.8.4 Users having loads with high harmonic content, low Power Factor and fluctuations shall install

appropriate correction equipment.

6.8.5 The Distribution Licensee shall abide by the instructions issued by the SLDC from time to time on load

management for maintaining the frequency of supply within the specified limits.

6.9

Safety Co-Ordination

6.9.1 The Distribution Licensee and the Users and any other Distribution Licensee having a common electrical

interface with the Licensee shall designate suitable persons to be responsible for safety coordination.

These persons shall be referred to as Control Persons. Their designations and telephone numbers shall be

exchanged between all the concerned persons. Any change in the list shall be notified promptly to all the

concerned.

6.9.2 The Distribution Licensee and such Users shall prepare safety manuals incorporating all the safety

precautions to be taken for each component of the Distribution System. All the safety rules and

precautions shall be observed when work is to be carried out on any line or apparatus, switchgear, or

circuits in any part of the Distribution System or in any part of the User System. The safety manuals thus

prepared shall be issued to all the control persons and such Users for compliance.

6.9.3 There shall be coordination between persons of the Distribution Licensee and the Users, between persons

of two Distribution Licensees having electrical interfaces, for carrying out the work on any apparatus or

lines etc., belonging to either party at the point of interconnection.

6.9.4 The provisions of the (State / Central) Grid Code Regulation (as the case may be) shall be followed at

Connection Points/ Interface Points in co-ordination with the Transmission Licensee.

6.9.5 The disconnecting device(s) at each electrical interface, which shall be capable of effectively

disconnecting the system of the Distribution Licensee and the other Users, and the grounding devices of

the respective systems at the control boundary shall be identified and marked by the Licensee and the

respective Users. These shall be maintained in good condition at all times. To prevent inadvertent

switching operations by unauthorized persons, such disconnecting devices shall be provided with

interlocks.

6.9.6 Wherever any Consumer has installed an emergency power supply system, either an electronic system

with storage batteries or with generators, the arrangement shall be such that the same cannot be operated

without clearly isolating the system from the supply mains. The responsibility of making the required

arrangement for isolation from supply mains shall be of the User and this shall be part of the electrical

layout submitted to Electrical Inspector for his approval. The possibility of a feedback from these devices

to the Distribution System from any of the conductors, including the neutral conductor shall be clearly

ruled out.

60

THE GAZETTE OF INDIA : EXTRAORDINARY

[PART III—SEC.4]

6.9.7 The appropriate Control Person at the electrical interface shall issue written permission to his counterpart

for carrying out the work on any apparatus, switchgear or lines beyond the electrical interface. Such

permissions shall be termed as "Permit to Work" (PTW). The format for PTW shall be standardized by

the Distribution Licensee and shall be used by all concerned.

6.9.8 The Distribution Licensee in consultation with the concerned User shall frame checklist of operations to

be carried out and the procedures for safety coordination for each electrical interface, before issue and

return of PTWs. Such procedures and checklists shall be issued to all the concerned by the Licensee for

implementation.

6.10 Maintenance and Testing

6.10.1 The Distribution Licensee shall prepare maintenance schedules for lines and equipment to meet the level

of maintenance as required in the "Distribution System under Power System Management and Operating

Standard" and "Distribution System under Power System Safety Standard ".

6.10.2 Regular testing of all the equipment, such as transformers, switchgear, protective relays etc., should be

carried out as recommended by the manufacturers and the relevant code of practices issued by the Bureau

of Indian Standards and CBIP. These shall be carried out at the prescribed intervals and the test results

shall be recorded in the maintenance registers. Wherever the test results indicate a decline in the

insulation resistance and/or deterioration of the equipment, preventive maintenance shall be carried out to

ensure serviceability, safety and efficiency.

6.10.3 The Distribution Licensee shall maintain well trained hot-line personnel, and all the required tools in good

condition, and conduct the maintenance work by using hot-line technique, wherever possible, to reduce

the period of interruption.

6.10.4 The Users shall maintain their Apparatus and Power Lines at all times conforming to I.E. Rules 1956

which are in force for time being and will be replaced by new rules made under Electricity Act, 2003 and

shall be suitable for being connected to the Distribution System in a safe and reliable manner.

6.11 Tools and Spares

6.11.1 The Distribution Licensee shall ensure the availability of proper tools and tackles at workplaces for

carrying out maintenance. The tools and tackles shall be checked from time to time and their serviceability

shall be ensured.

6.11.2 The Distribution Licensee shall maintain an inventory of spares required for maintenance and

replacement purposes at suitable locations according to a clear policy to be laid down by the Licensee.

6.12 Human Resource Development and Training

The Distribution Licensee shall make appropriate arrangements for imparting training to the workmen

and supervisory staff, incorporating up-to-date techniques of Distribution System design, construction

and maintenance, safety, consumer services etc. The Licensee shall frame a suitable syllabus for this

purpose.

6.13 Geographical Information System (GIS) / Global Positioning System (GPS) based information

system

6.13.1 The Distribution Licensee shall, in stages, deploy GIS/GPS based Geographical Facilities Information

System for planning operation and maintenance of distribution system. The GIS shall be utilized for

mapping the all-important elements of distribution system which includes lines, transformers, sub-

stations, generating stations, all unit locations and shall eventually covers all consumers. The GIS shall be

linked to active relational database management system (RDBMS) and GPS shall be utilized for time

synchronization.

6.13.2 The digital maps of distribution network shall be developed for each of the following preferably by

conducting GPS survey which is easier, fast, accurate and economical:

(a) 33 kV network of complete distribution system indicating distance, type and size of conductor /size of

Under Ground (UG) cable with single core or 3 core for lines and sub-station particulars with Single

Line Diagram (SLD).

(b) The feeder-wise 11 kV lines/cables indicating distance, type and size of conductor /UG cable, location

and capacity of distribution transformers.

(c) The distribution transformer-wise L.T. line/cables with a number of consumers and connected load of

each of L.T. support/L.T. feeder pillar Box.

[भागIII—खण् ड 4]

भारत का रािपत्र : असाधारण

61

CHAPTER – 7 METERING AND PROTECTION CODE

7.1

Objectives

The Chapter specifies the procedure for metering in Distribution System with respect to operational

metering as well as tariff and commercial metering. This section also specifies the general guidelines for

protection of Distribution system.

Provided that the licensee shall abide by the CEA (Installation and Operation of Meters) Regulations

2006 and amendments thereof.

7.2

Operational Metering

The minimum requirement of operational metering at Distribution System substations shall be as follows:

(a) Grid substation

66 / 33 kV bus voltage

33 / 22 / 11 kV bus voltage

66 / 33 / 22 / 11 kV incoming / outgoing current in each phase and each circuit.

Power transformer primary and secondary currents in each phase of every transformer.

HT outgoing feeder current in each phase for each feeder.

Power factor in each HT feeder.

Load survey meters having a memory duration of at least 45 days for all the incoming and outgoing

feeders.

Facility to record energy in MWH and frequency at intervals of 15 minutes at point of connection with

Transmission Licensee.

(b) User’s System with Demand of 1 MW and above

Voltage

Current

Load

Power Factor

Energy

7.3

Tariff and Commercial Metering

7.3.1 Tariff metering shall be provided at each point of interconnection between the Distribution and

Transmission Systems in accordance with the Central / State Grid Code as the case may be and the

Transmission Services Agreement thereof.

7.3.2 Tariff metering shall be provided at the Connection Points/ Interface Points between the User’s system

and the Distribution System and shall be governed by the provision in the Distribution Services

Agreement.

7.3.3 All the meters, instrument transformers (CT/PT), metering cubicles and testing procedures shall conform to

the relevant Indian Standard Specification and relevant provision made under the Electricity Act, 2003.

7.3.4 The CT/PT deployed for metering of energy supplied to the Consumers shall be of class 0.2 accuracy.

However, in case of rating of instrument transformers in service, which are of 0.5 class, which may

continue to be used. These shall also conform to relevant IEC or IS specifications. On failure, the same

shall be replaced by a suitable CT/PT of 0.2 class accuracy after exhausting the CT/PT of 0.5 class

accuracy (as available in their inventory). It is desirable that the Distribution Licensee shall purchase new

CT/PT of 0.2 class accuracy.

7.3.5 The open access consumer, generating company, Distribution licensee and traders shall provide Meters, as

may be specified by the Commission for such consumer based on voltage, point and period of supply and

tariff category as also incorporated in the applicable (State Grid Code) Regulations, enforce.

7.4

Measurement of Energy Import/Export

7.4.1 The Distribution Licensees shall install the following meters for all of their sub-transmission lines

62

THE GAZETTE OF INDIA : EXTRAORDINARY

[PART III—SEC.4]

connecting the generating stations, and substations for the measurement of energy import/export from each

Connection Point/ Interface Point, energy generated in generating units and energy consumed in power

stations and substations:

(a) Active energy imports.

(b) Active energy export.

(c) Reactive energy imports.

(d) Reactive energy export.

Each metering point associated with the determination of energy exported or imported, between the

Generating Companies, Transmission Licensees and Distribution Licensees shall be provided with both

main and check meters. The minimum standard of accuracy of these meters shall be of accuracy class 0.2.

These meters shall conform to the relevant IEC or IS specifications.

7.4.2 All the instrument transformers used in conjunction with commercial (tariff) metering shall also be of

accuracy class 0.2 and conform to the relevant IEC or IS specifications. The rating shall be suitable for

catering the burdens of lead wires and metering. However, in case of rating of instrument transformers in

service, which are of 0.5 class, which may continue to be used. These shall also conform to relevant IEC

or IS specifications. On failure, the same shall be replaced by suitable CT/PT of 0.2 class accuracy after

exhausting the CT/PT of 0.5 class accuracy (as available in their inventory). It is desirable that the

Distribution Licensee shall purchase new CT/PT of 0.2 class accuracy.

7.4.3 Data collection shall be used to integrate impulses from meters over each integration period as per the

agreement, store values, and transmit the same to the data collection system of the Distribution Licensee.

Data shall be collected from both the main and check metering schemes.

7.4.4 Voltage failure relays shall be provided to initiate an alarm on loss of one or more phases of the voltage

supply to the meter.

7.4.5 Main and check meters shall be provided at all Connection Points/ Interface Points. All the meters shall

be tested and calibrated according to the guidelines provided in the relevant IEC/IS specifications at least

once a year and also whenever the difference in readings between the main and check meters exceed

0.5%.

7.4.6 Records of these calibrations and tests shall be maintained for reference.

7.4.7 The Generating Companies, Transmission Licensees and Distribution Licensees shall formulate and agree

upon a procedure covering summation, collection and processing of tariff meter readings at various

interconnection sites of their area. Whenever necessary, these procedures can be revised.

7.4.8 The ownership, responsibility of maintenance and testing of these meters shall be as mutually agreed to

between the Users and the concerned Licensees.

7.4.9 The term ‘Meter’ shall include Current transformers, voltage/potential transformers, wiring between them

and meter box/panel.

7.5

Protection System

7.5.1 No item of electrical equipment shall be allowed to remain connected to the system unless it is covered by

the appropriate protection aimed at reliability, selectivity, speed, and sensitivity. The Distribution

Licensees shall cooperate with the Transmission Licensee to ensure correct and appropriate settings of

protection to achieve effective, discriminatory isolation of faulty line/equipment within the time target

clearance specified by the Transmission Licensee.

7.5.2 Protection settings shall not be altered, or protection bypassed and/or disconnected without consultation and

agreement of all the affected Users. In case the protection has been bypassed and/or disconnected by

agreement due to any cause, the same should be rectified and protection restored to normal condition as

quickly as possible. If agreement has not been reached, the electrical equipment shall be isolated

forthwith.

7.5.3 The settings of protective relays for 33 kV, 22 kV and 11 kV lines shall be such that a fault in any section

does not affect the section between the generating unit and the faulty section under all conditions. The

Transmission Licensee shall notify the initial settings and any subsequent changes to the Users from time

to time. Routine checks on the performance of the protective relays shall be conducted and any

malfunction shall be noted and corrected as soon as possible. Short circuit studies required for deciding

the relay settings shall be conducted by the Licensee with the data collected from the Transmission

Licensee and the Users. Representatives of the Generating Companies, Transmission Licensees and

[भागIII—खण् ड 4]

भारत का रािपत्र : असाधारण

63

Distribution Licensees shall meet periodically to discuss such malfunctions, changes in the system

configuration, if any, and possible revised settings of relays.

7.5.4 The Transmission Licensee shall be responsible for arranging periodical meetings between the Generating

Companies and the Distribution Licensees to discuss the coordination of protection. The Transmission

Licensee shall investigate any malfunction of protection or other unsatisfactory protection issues. The

concerned Licensees shall take prompt action to correct any protection malfunction or other unsatisfactory

protection issue as discussed and agreed to in these periodical meetings.

7.5.5 All generating units and all associated electrical equipment of the Generating Company connected to the

Distribution System shall be protected by adequate protection, as per CBIP manual, so that the system

does not suffer due to any disturbances originating at the generating unit.

7.5.6 Distribution System: - For Power Transformers of HV class in the Distribution System, differential

protection shall be provided for 10 MVA and above along with backup time lag over current and earth fault

protection with directional feature for parallel operation. Transformers of 1 MVA and above but less than

10 MVA shall be protected by time lag over current and earth fault. In addition, all power transformers

shall be provided with gas operated relays, winding and oil temperature alarm and protection.

7.5.7 Distribution lines: - All the 33 kV, 22 kV and 11 kV lines at Connection Points / Interface Points shall be

provided with a minimum of over current and earth fault relays as follows:

a) Plain radial feeders: Non-directional time lag over current and earth fault relays with suitable settings to

obtain discrimination between adjacent relay settings.

b) Parallel/ring feeders: Directional time lag over current and earth fault relay.

7.6

Fire Protection

All adequate precautions shall be taken and protection shall be provided against fire hazards to all apparatus in

the System conforming to the relevant Indian Standard Specifications and/or provisions under other

relevant rules as amended from time to time.

CHAPTER - 8 CROSS BOUNDARY SAFETY CODE

8.1

Objective

8.1.1 The objective of this section is to achieve an agreement on the principles of safety when working across a

control boundary between the Distribution Licensee and the Users.

8.1.2 This chapter specifies the requirements for safe working practices for the maintenance of equipment

associated with cross-boundary operations and lays down the procedure to be followed when the work is

carried out on electrical equipment connected to another User's System.

8.1.3 User may mean another Licensee so that this Code applies for safety across the boundary between two

Licensees also, by substituting “another Licensee” for User.

8.2

Control Persons and their Responsibility

The Distribution Licensee and all the Users (comprising Generation Companies, Transmission Licensees

and consumers having load above 1MW or dedicated line) shall nominate suitably authorized and

technically qualified persons to be responsible for the co-ordination of safety across their boundary. These

persons shall be referred to as "Control Persons".

8.3

Procedure

8.3.1 The Distribution Licensee shall issue a list of Control Persons with their names, designations, addresses,

telephone numbers and email IDs, to all the Users having direct control boundary with him. This list shall

be updated promptly whenever there is any change of Control Person or details as shared in the list.

8.3.2 All the Users such as mentioned in 8.3.1 having a direct control boundary with the Distribution Licensee

shall issue a similar list of their Control Persons to the Licensee. This list shall be updated promptly

whenever there is any change of Control Person or details as shared in the list.

8.3.3 Whenever any work across a cross boundary is to be carried out by the User or the Distribution Licensee,

the Control Person of the User or the Licensee as the case may be, who has to carry out the work, shall

directly contact his counterpart. Code words shall be agreed to at the time of work to ensure the correct

identification of both parties. Contact between Control Persons shall normally be made by direct

telephone or through emails.

8.3.4 If the work extends beyond one shift, the Control Person shall hand over charge to the relief Control

Person and fully brief him on the nature of the work and the code words in the operation.

64

THE GAZETTE OF INDIA : EXTRAORDINARY

[PART III—SEC.4]

8.3.5 The Control Persons shall cooperate to establish and maintain the precautions necessary to be taken for

carrying out the required work in a safe manner. Both the established isolation and the established earth

shall be kept in locked positions wherever such facilities exist, and these shall be clearly identified.

8.3.6 The Control Person in charge of the work shall satisfy himself that all the safety precautions to be taken

are established before commencing the work. He should issue the safety documentation to the working

party to allow the work to commence.

8.3.7 After the completion of the work, the Control Person in charge of the work being carried out should

satisfy himself that the safety precautions taken are no longer required, and shall make a direct contact

with his counterpart Control Person and request removal of the safety precautions. The equipment shall be

declared as suitable for return to service only after confirmation of removal of all the safety precautions,

by direct communication, using the code word contact between the two Control Persons, and the return of

agreed safety documentation from the working party.

8.3.8 The Distribution Licensee shall develop an agreed written procedure for Cross Boundary Safety and

continuously update the same.

8.3.9 Any dispute concerning Cross Boundary Safety shall be resolved at the level of transmission licensee, if

transmission licencsee is not a party. In case where transmission licensee is a party, the dispute shall be

referred to the Commission for resolution of the dispute.

8.4

Special Considerations

8.4.1 All the equipment on Cross Boundary Circuits, which may be used for the purpose of safety coordination

and establishment of isolation and earthing, shall be permanently and clearly marked with an

identification number or name being unique to the particular sub-station. This equipment shall be

regularly inspected and maintained in accordance with the manufacturer's specifications.

8.4.2 Each Control Person shall maintain a safety log either hand written in Register(s) or in soft copy through

office PCs. The information should be maintained in chronological order of all operations and messages

relating to the safety co-ordination sent and received by him.

8.4.3 As far as possible each of the Distribution Licensees shall maintain an updated map of his system pertaining

to the area fed by each substation.

CHAPTER – 9 INCIDENT/ACCIDENT REPORTING

9.1

Objective

This Chapter covers procedure of major incident / accident reporting (which occur in Distribution

System) by User to Licensee and Licensee to User and Commission.

9.2

Major Incident or Accident Reporting

9.2.1 The Distribution Licensee shall send a preliminary report to the Commission on all significant Incidents in

the Licensee's Area of Supply, which results in interruption to service, substantial damage to equipment or

loss of life or significant injury to human beings within one week of its occurrence followed by a detailed

report within one month.

9.2.2 The Distribution Licensee and the Users shall establish a format and procedure for exchange of

information.

9.2.3 The Users shall furnish information to the Distribution Licensee regarding any major incident occurring in

their Systems promptly.

9.3

Reporting Procedure

9.3.1 All reportable incidents occurring in the lines and equipment’s of 11 kV and above substations shall be

promptly communicated orally by the Licensee whose equipment has experienced the incident, to all

other significantly affected Users identified by the Distribution Licensee and the Transmission Licensee.

The Distribution Licensee should submit a written report to the Transmission Licensee within one hour of

such oral communication. If the reporting incident is of major nature, the written report shall be submitted

within two hours duly followed by a comprehensive report within 48 hours of the submission of the initial

written report. In other cases, the reporting Distribution Licensee shall submit a report within five

working days to the Transmission Licensee.

9.3.2 The Transmission Licensee shall call for a report from the Distribution Licensee(s) on any reportable

incident affecting other Users and particularly in cases where such User whose equipment might have

been a source of the reportable incident and does not report the same. However, this shall not relieve any

User from the obligation to report events in accordance with Rules framed under relevant provision made

[भागIII—खण् ड 4]

भारत का रािपत्र : असाधारण

65

under Electricity Act, 2003. The format for such a report shall be as per the approval of the Distribution

Code Review Panel and shall typically contain the following:

a) Location of the incident,

b) Date and time of the incident,

c) Plant or Equipment involved,

d) Nature of incident (electrical or non-electrical),

e) Supplies interrupted and the duration wherever applicable,

f)

Amount of Generation lost, wherever applicable,

g) System Parameters before and after the incident (Voltage, Frequency, Load, Generation, etc.)

h) Network configuration before the incident,

i)

Relay indications and performance of protection,

j)

Brief description of the incident,

k) Estimated time of return to service,

l)

Any other relevant information,

m) Recommendations for future improvement,

n) Name and designation of the reporting person.

9.3.3 The report shall contain sufficient detail to describe the event to enable the recipient to assess the

implications and risks arising out of the same. The recipient may ask for clarifications and additional

information wherever necessary and it is obligatory that the reporting User shall put his best efforts and

provide all the necessary and reasonable information.

9.3.4 In case of a request by either party, the oral report shall be written down by the sender and dictated by

way of a telephone message or sent by Fax/e-mail to the recipient. In case of an emergency the report can

be given only orally and followed by written confirmation.

9.3.5 Reporting of accidents shall be in accordance with Intimation of Accidents (Form and Time Service of

Notice) Rules 2004 read with section 161 of Electricity Act, 2003, or other applicable rules. Till such

rules are made, the Distribution Licensee shall follow reporting of accidents as mentioned in Power

System Safety Standard (Indian Electricity Rule 1956) as per Annexure 4 to these regulations.

CHAPTER – 10: MISCELLANEOUS

10.1

Dispute Redressal

Any dispute regarding the interpretation of any provision of the Distribution Code, shall be addressed to the

Secretary to the Commission. The decision of the Commission shall be taken as final and binding on all

concerned.

10.2

Power to Remove Difficulties

If any difficulty arises in giving effect to any of the provisions of the Distribution Code, the Commission may,

by general or specific order, make such provisions not inconsistent with the provisions of the Act, as may

appear to be necessary for removing the difficulty.

10.3

Power to Relax

The Commission may by general or special order, for reasons to be recorded in writing and after giving an

opportunity of hearing to the parties likely to be effected by grant of relaxation, may relax any of the provisions

of the Distribution Code on its own motion or on an application made before it by an interested person.

10.4

Power to Amend

The Commission may, at any time, vary, alter, modify or amend any provision of the Distribution Code.

10.5

Repeal and Savings

10.5.1 Nothing in these Regulations shall be deemed to limit or otherwise affect the inherent power of the

Commission to make such orders as may be necessary to meet the ends of justice or to prevent abuses of the

process of the Commission.

66

THE GAZETTE OF INDIA : EXTRAORDINARY

[PART III—SEC.4]

10.5.2 Nothing in these Regulations shall bar the Commission from adopting in conformity with the provisions of the

Act a procedure, which is at variance with any of the provisions of these Regulations, if the Commission, in

view of the special circumstances of a matter or class of matters and for reasons to be recorded in writing,

deems it necessary or expedient for dealing with such a matter or class of matters.

10.5.3 Nothing in these Regulations shall, expressly or impliedly, bar the Commission dealing with any matter or

exercising any power under the Act for which no Regulations have been framed, and the Commission may deal

with such matters, powers and functions in a manner it thinks fit.

10.5.4 On and from notification of these regulations, adopted, Joint Electricity Regulatory Commission Goa and

Union Territories (Distribution Code) Regulations, 2010, along with amendments as carried out thereto, shall

stand repealed.

By Order of the Commission.

V. K. DHAR, Secy.

[ADVT.-III/4/Exty./609/2023-24]

ANNEXURE 1: LOAD DATA FOR DEMANDS FOR OF 1 MW AND ABOVE

1.

Type of Load: (e.g., Furnace loads, rolling mills, traction loads, pumping loads, industrial loads etc.)

2.

Maximum Demand (KVA)

3.

Year(s) by which full/part load supply is required: (Phasing of loads shall be furnished)

4.

Location of load with a location map drawn to scale:

5.

Rated voltage, frequency and number of phases at which supply is required:

6.

Description of equipment:

a) Motors: (State the purpose and number of installations, voltage and KW rating, method of starting,

starting current and duration, type of motors, types of drives and control equipment etc.)

b) Heating: (Type and KW rating)

c) Furnace: (Type, Furnace Transformer capacity and voltage ratio)

d) Electrolysis: (Purpose and KVA capacity)

e) Lighting: KW Demand.

f) Any other loads with particulars:

7.

Sensitivity of Demand to fluctuations in voltage and frequency of supply at the time of peak load: (Give

details).

8.

Phase unbalance imposed on the System:

9.

Maximum: ____________________ Average: ________________________

10.

Maximum harmonic content imposed on the System: (Furnish details of devices proposed for the suppression

of harmonics).

11.

Details of the loads likely to cause demand fluctuations greater than 10 MW at the point of connection

including voltage dips (percentage) lasting for 5 seconds or more.

ANNEXURE 2: EMBEDDED GENERATOR UNIT-WISE DATA

Sl. No.

Particulars

Details

1.

Name and address of Generating Company:

2.

Location of Generating Plants (s):

3.

Generation Volts (kV);

4.

Rated kVA/kW

5.

Maximum and minimum Active Power sent out (kW) Reactive Power

capability (kVAr), if any;

[भागIII—खण् ड 4]

भारत का रािपत्र : असाधारण

67

Sl. No.

Particulars

Details

6.

Type of Generating Plant—synchronous, asynchronous, etc.;

7.

Method of voltage control;

8.

Generator transformer details, if applicable;

9.

Requirements for Top-up supplies and/or standby supplies;

10.

Generator kW/kVAr capability chart (at lower voltage terminals);

11.

Type of excitation system;

12.

Inertia constant kW secs/kVA;

13.

Stator Resistance;

14.

Direct-Axis Reactance (Sub-transient, Transient and Synchronous);

15.

Quadrature-Axis Reactance (Sub-transient and Synchronous);

16.

Zero Sequence (Resistance and Reactance);

17.

Negative Sequence (Resistance and Reactance);

18.

Generator

Transformer

(Resistance,

Reactance,

kVA

Rating,

Tap

Arrangement, Vector Group, Grounding, Connection and % Impedance);

19.

Automatic Voltage Regulator block diagram, including the data on the gains

(forward and feedback), time constants, and voltage control limits;

20.

Speed governor block diagram detailing the governor fly-ball, if applicable,

and control system and Prime Mover time constants, together with the

turbine rating and maximum power

21.

Standby requirements:

I.

Rated Capacity and Minimum Generation of each Generating Unit and

Power Station in kW for standby capacity requirements.

II.

Generating Unit and Power Station auxiliary Demand (Active Power and

Reactive Power) in kW and kVAr, at rated capacity conditions.

III.

Interface

Arrangements

the

means

of

synchronization between the

distributors and User;

IV.

Details of arrangements for connecting to ground that part of the

Generator’s System directly connected to the distribution system;

V.

The means of connection and disconnection which are to be employed

VI.

Precautions to be taken to ensure the continuance of safe conditions should

any grounded neutral point of the Generating unit become disconnected

from ground.

VII.

Details of Protection System of the Generating Unit

ANNEXURE 3: SYSTEM DATA

The Distribution Licensee shall provide only relevant details out of the following details as required by

Consumer for designing and selecting electrical equipment:

1. Topological map of area of supply by licensee marking boundaries.

2. Distribution map of the Distribution Licensee drawn to scale of at least 1 cm to 2.5 KM showing the

existing HT/EHT lines and substations within the Area of Supply of the Licensee. Lines and substations

under construction or planned for the next five years shall be shown in dotted lines.

3. Single line diagram of the Distribution System showing line length, conductor sizes, substation capacity,

capacitor sizes with locations, auto-reclosures, etc.

4. Details of Metering and Relaying at substations.

5. Details of Grid substations at the point of interconnections as follows:

i.

MVA Capacity and voltage,

ii.

Number of transformers, capacity of each transformer, voltage ratios, Ranges of taps Impedance

68

THE GAZETTE OF INDIA : EXTRAORDINARY

[PART III—SEC.4]

iii. Fault level at substation bus bars, both three phase and single line to ground fault

iv. Bus impedance,

v.

Substation layout diagram.

6. Drawl at Connection Points / Interface Point: Maximum and Minimum MW drawl from each

connection with the Transmission System or with other Distribution Licensees during last six months

ANNEXURE 4: RULE NO. 44 A OF THE INDIAN ELECTRICITY RULES, 1956

Rule no. 44 A – Intimation of Accident

If any accident occurs in connection with the generation, transmission, supply or use of energy in or in

connection with any part of electric supply lines or other works of any person and the accident results in or is

likely to have resulted in loss of human or animal life or in any injury to a human being or an animal, such

person or any authorized person of the distribution licensee not below the rank of Junior Engineer or equivalent

shall send to the Inspector a telegraphic report within 24 hours of the knowledge of the occurrence of the fatal

accident and a written report in a form set out in Annexure XIII within 48 hours of the knowledge of the

occurrence of the fatal accident and all other accidents. Where practicable a telephonic message should also be

given to the Inspector immediately the accident comes to the knowledge of authorized officer of distribution

licensee or other person concerned.

The Indian Electricity Rules, 1956

[ANNEXURE XIII]

FORM FOR REPORTING ELECTRICAL ACCIDENTS

(See Rule 44-A)

Sl. No.

Particulars

Details

1

Date and Time of accident

2

Place of accident

(Village/Town, Tehsil /Thana, District and State)

3

System and voltage of supply

(Whether EHV/HV/LV line, sub-station/generating station / consumer’s

installations/service lines/other installations)

4

Designation of the Officer-in-charge (in whose jurisdiction the accident

occurred)

5

Name of owner/user of energy in whose premises the accident occurred.

6

Details of victim

(a)

Human

Sr. No.

Name

Father’s Name

Sex of victim

Full Postal

Address

Approx. Age

Fatal / Non-

Fatal

(b)

Animals

Sr. No.

Description of Animals

Number(s)

Name(s) of

Owner(s)

Address (es) of

owner(s)

Fatal / Non-

Fatal

7

In case the victim(s) is /are employee(s):

a) Designation of such person(s)

b) Brief description of the job undertaken, if any.

c)

Whether such person/persons was/were allowed to work on the

job.

8

In case the victim(s) is/are employee(s) of a licensed contractor:

a) Did the victim(s) possess any electric workman’s permits(s),

supervisor’s certificate of competency issued under Rule 45?

b) If yes give number and date of issue and the name of issuing

authority.

c) Name and designation of the person who assigned the duties of

[भागIII—खण् ड 4]

भारत का रािपत्र : असाधारण

69

Sl. No.

Particulars

Details

the victim(s)

9

In case of accident in the Distribution licensee system, was the ‘Permit

to Work’ (PTW) taken?

10

Describe fully the nature and extent of injuries, e.g., fatal / disablement

(permanent or temporary) of any portion of the body or burns or other

injuries.

In case of fatal accident, was the post mortem performed?

11

Detailed causes leading to the accident

(To be given in a separate sheet annexed to this form)

12

Action taken regarding first-aid, medical attendance etc. immediately

after the occurrence of the accident (give details)

13

Whether the District Magistrate and Police Station concerned have been

notified of the accident (if so, give details)

14

Steps taken to preserve the evidence in connection with accident to the

extent possible.

15

Names and designation(s) of the person(s) assisting, supervising the

person(s) killed or injured.

16

What safety equipment were given to and used by the person(s) who met

with this accident (e.g., rubber gloves, rubber mats, safety belts and

ladders etc.)?

17

Whether isolating switches and other sectionalizing devices were

employed to deaden the section for working on the same? Whether

working section was earthed at the site of work?

18

Whether the work on live lines was undertaken by authorized person(s)?

If so, the name and the designation of such person(s) may be given.

19

Whether the artificial resuscitation treatment work on live lines was

undertaken by Authorised person(s)?

If yes, how long was it continued before its abandonment?

20

Names and designations of persons present at and witnessed the

accident.

21

Any other information/remarks.

Place:

Time:

Date:

Signature:

Name & Designation:

Address of the person reporting:

ANNEXURE 5: LIST OF ABBREVIATIONS

Sl. No.

Abbreviation

Full Form

1

AAC

All Aluminum Conductor

2

AAAC

All Aluminum Alloy Conductor

3

ACSR

Aluminum Conductor Steel Reinforced

4

BIS

The Bureau of Indian Standards

5

SAIDI

System Average Interruption Duration Index

6

SAIFI

System Average Interruption Frequency Index

7

CBIP

The Central Board of Irrigation and Power

8

CEA

Central Electricity Authority

9

CEI

Chief Electrical Inspector

10

CT

Current Transformer

11

DCR

Distribution Code Review

70

THE GAZETTE OF INDIA : EXTRAORDINARY

[PART III—SEC.4]

Sl. No.

Abbreviation

Full Form

12

DCRP

Distribution Code Review Panel

13

EHV/EHT

Extra High Voltage/ Extra High Tension

14

GI

Galvanized Iron

15

GSS

Gas Sub-station

16

HV

High Voltage/

17

HT

High Tension

18

Hz

Hertz (cycles per seconds)

19

IDMT

Inverse Definite Minimum Time

20

IEEE

Institute of Electrical and Electronics Engineers

21

IEC

International Electro Technical Commission

22

IEGC

Indian Electrical Grid Code

23

IS

Indian Standards

24

IP

Irrigation Pump

25

kA

Kilo Ampere

26

kW

Kilo Watt

27

kWh

Kilo Watt hour

28

kVA

Kilo Volt Ampere

29

LT

Low Tension

30

LV

Low Voltage

31

MCB

Miniature Circuit Breaker

32

MVA

Mega Volt Ampere

33

MW

Megawatt

34

PCC

Prestressed Cement Concrete

35

PT

Potential transformer

36

PTW

Permit to work

37

RCC

Reinforced Cement Concrete

38

REC

Rural Electrification Corporation

39

R&R

Rehabilitation and Resettlement

40

SCADA

Supervisory Control and Data Acquisition

41

SLDC

State Load Despatch Centre

42

STU

State Transmission Utility

Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064

and Published by the Controller of Publications, Delhi-110054. MANOJ

KUMAR

VERMA

Digitally signed by

MANOJ KUMAR VERMA

Date: 2023.12.14

19:21:53 +05'30'