jftLVªh la- Mh,y¼,u½-04@0007@2003&&05

REGISTERED No. DL(N)-04/0007/2003—05

lkIrkfgd@WEEKLY

çkf/kdkj ls çdkf'kr

PUBLISHED BY AUTHORITY

la- 11]

ubZ fnYyh] 'kfuokj] ekpZ 12—ekpZ 18] 2016 ¼QkYxqu 22] 1937½

No. 11]

NEW DELHI, SATURDAY, MARCH 12—MARCH 18, 2016 (PHALGUNA 22, 1937)

bl Hkkx esa fHkUu i`"B la[;k nh tkrh gS ftlls fd ;g vyx ladyu ds :i esa j[kk tk lds

(Separate paging is given to this Part in order that it may be filed as a separate compilation)

fo"k;&lwph

lR;eso t;rs

1—491 GI/2015

(253)

Hkkx I—[k.M&1—¼j{kk ea=ky; dks NksM+dj½ Hkkjr ljdkj ds

ea=ky;ksa vkSj mPpre U;k;ky; }kjk tkjh dh

xbZ fof/krj fu;eksa] fofu;eksa] vkns'kksa rFkk

ladYiksa ls lEcfUèr vfèlwpuk,a. ..............

253

Hkkx I—[k.M&2—¼j{kk ea=ky; dks NksM+dj½ Hkkjr ljdkj ds

ea=ky;ksa vkSj mPpre U;k;ky; }kjk tkjh dh

xbZ ljdkjh vf/kdkfj;ksa dh fu;qfDr;ksa]

inksUufr;ksa] Nqfê;ksa vkfn ds lEcUè esa

vfèlwpuk,a. ..............................................

213

Hkkx I—[k.M&3—j{kk ea=ky; }kjk tkjh fd, x, ladYiksa

vkSj vlkafof/kd vkns'kksa ds lEcU/k esa

vfèlwpuk,a. ..............................................

1

Hkkx I—[k.M&4—j{kk ea=ky; }kjk tkjh dh xbZ ljdkjh

vf/kdkfj;ksa dh fu;qfDr;ksa] inksUufr;ksa]

Nqfê;ksa vkfn ds lEcU/k esa vfèlwpuk,a. .....

607

Hkkx II—[k.M&1—vf/kfu;e] v/;kns'k vkSj fofu;e. ............

¹

Hkkx II—[k.M&1d—vf/kfu;eksa] v/;kns'kksa vkSj fofu;eksa

dk fgUnh Hkk"kk esa izkf/kd`r ikB. .................

¹

Hkkx II—[k.M&2—fo/ks;d rFkk fo/ks;dksa ij izoj lfefr;ksa

ds fcy rFkk fjiksVZ. ...................................

¹

Hkkx II—[k.M&3—mi [k.M ¼i½—Hkkjr ljdkj ds ea=ky;ksa ¼j{kk

ea=ky; dks NksM+dj½ vkSj dsUnzh;

izkf/kdj.kksa ¼la?k 'kkflr {ks=ksa ds iz'kkluksa dks

NksM+dj½ }kjk tkjh fd, x, lkekU; lkafofèd

fu;e ¼ftuesa lkekU; Lo:i ds vkns'k vkSj

mifof/k;ka vkfn Hkh 'kkfey gaS½....................

¹

Hkkx II—[k.M&3—mi [k.M ¼ii½—Hkkjr ljdkj ds ea=ky;ksasa

¼j{kk ea=ky; dks NksM+dj½ vkSj dsUnzh;

izkf/kdj.kksa ¼la?k 'kkflr {ks=ksa ds iz'kkluksa dks

NksM+dj½ }kjk tkjh fd, x, lkafof/kd

vkns'k vkSj vf/klwpuk,a. ............................

¹

Hkkx II—[k.M&3—mi [k.M ¼iii½—Hkkjr ljdkj ds ea=ky;ksasa

¼ftlesa j{kk ea=ky; Hkh 'kkfey gS½ vkSj dsUnzh;

izkf/kdj.kksa ¼la?k 'kkflr {ks=ksa ds iz'kkluksa dks

NksM+dj½ }kjk tkjh fd, x, lkekU; lkafof/kd

fu;eksa vkSj lkafof/kd vkns'kksa ¼ftuesa lkekU;

Lo:i dh mifofè;ka Hkh 'kkfey gSa½ ds fgUnh

izkf/kd`r ikB ¼,sls ikBksa dks NksM+dj tks Hkkjr

ds jkti= ds [k.M 3 ;k [k.M 4 esa izdkf'kr

gksrs gSa½. .....................................................

*

Hkkx II—[k.M&4—j{kk ea=ky; }kjk tkjh fd, x, lkafof/kd

fu;e vkSj vkns'k. ......................................

*

Hkkx III—[k.M&1—mPp

U;k;ky;ksa]

fu;a=d

vkSj

egkys[kkijh{kd] la?k yksd lsok vk;ksx] jsy

foHkkx vkSj Hkkjr ljdkj ls lEc)

vkSj v/khuLFk dk;kZy;ksa }kjk tkjh dh xbZ

vfèlwpuk,a. ..............................................

335

Hkkx III—[k.M&2—isVsaV dk;kZy; }kjk tkjh dh xbZ isVsUVksa vkSj

fMtkbuksa ls lEcfU/kr vf/klwpuk,a vkSj uksfVl

¹

Hkkx III—[k.M&3—eq[; vk;qDrksa ds izkf/kdkj ds v/khu

vFkok }kjk tkjh dh xbZ vfèlwpuk,a..........

¹

Hkkx III—[k.M&4—fofo/k vf/klwpuk,a ftuesa lkafof/kd fudk;ksa

}kjk tkjh dh xbZ vf/klwpuk,a] vkns'k] foKkiu

vkSj uksfVl 'kkfey gSa. ................................

61

Hkkx IV—xSj&ljdkjh O;fDr;ksa vkSj xSj&ljdkjh fudk;ksa

}kjk tkjh fd, x, foKkiu vkSj uksfVl.....

179

Hkkx V—vaxzsth vkSj fgUnh nksuksa esa tUe vkSj e`R;q ds vkadM+ksa

dks n'kkZus okyk lEiwjd. ............................

¹

¹vkadM+s izkIr ugha gq,A

i`"B la-

i`"B la-

CONTENTS

Page

No.

PART I—SECTION 1—Notifications relating to Non-

Statutory Rules, Regulations, Orders and

Resolutions issued by the Ministries of the

Government of India (other than the

Ministry of Defence) and by the Supreme

Court .........................................................

PART I—SECTION 2—Notifications regarding

Appointments, Promotions, Leave etc. of

Government Officers issued by the

Ministries of the Government of India

(other than the Ministry of Defence) and by

the Supreme Court ....................................

PART I—SECTION 3—Notifications relating to resolutions

and Non-Statutory Orders issued by the

Ministry of Defence....................................

PART I—SECTION 4—Notifications regarding

Appointments, Promotions, Leave etc. of

Government Officers issued by the Ministry

of Defence................................................

PART II—SECTION 1—Acts, Ordinances and Regulations

PART II—SECTION 1A—Authoritative texts in Hindi

language, of Acts, Ordinances and

Regulations ...............................................

PART II—SECTION 2—Bills and Reports of the Select

Committee on Bills ...................................

PART II—SECTION 3—SUB-SECTION (i)—General

Statutory Rules (including Orders, Bye-

laws, etc. of general character) issued by the

Ministry of the Government of India (other

than the Ministry of Defence) and by the

Central Authorities (other than the

Administration of Union Territories) ........

PART II—SECTION 3—SUB-SECTION (ii)—Statutory

Orders and Notifications issued by the

Ministriess of the Government of India

(other than the Ministry of Defence) and

by the Central Authorities (other than the

Administration of Union Territories) .....

PART II—SECTION 3—SUB-SECTION (iii)—Authoritative

texts in Hindi (other than such texts,

published in Section 3 or Section 4 of the

Gazette of India) of General Statutory Rules

& Statutory Orders (including Bye-laws of

a general character) issued by the

Ministries of the Government of India

(including the Ministry of Defence) and by

Central

Authorities

(other

than

Administration of Union Territories).........

PART II—SECTION 4—Statutory Rules and Orders

issued by the Ministry of Defence ...........

PART III—SECTION 1—Notifications issued by the High

Courts, the Comptroller and Auditor

General, Union Public Service Commission,

the Indian Government Railways and by

Attached and Subordinate Offices of the

Government of India .................................

PART III—SECTION 2—Notifications and Notices issued

by the Patent Office, relating to Patents

and Designs .............................................

PART III—SECTION 3—Notifications issued by or under

the authority of Chief Commissioners ......

PART III—SECTION 4—Miscellaneous Notifications

including

Notifications,

Orders,

Advertisements and Notices issued by

Statutory Bodies .......................................

PART IV—Advertisements and Notices issued by Private

Individuals and Private Bodies .................

PART V—Supplement showing Statistics of Births and

Deaths etc. both in English and Hindi ......

*Folios not received.

254

THE GAZETTE OF INDIA, MARCH 12, 2016 (PHALGUNA 22, 1937)

[PART I—SEC. 1

253

607

*

Page

No.

179

61

335

213

*

*

*

*

*

*

*

*

*

1

Hkkx I—[k.M 1]

Hkkjr dk jkti=] ekpZ 12] 2016 ¼QkYxqu 22] 1937½

255

Hkkx I — [k.M 1

[PART I—SECTION 1]

[¼j{kk ea=ky; dks NksM+dj½ Hkkjr ljdkj ds ea=ky;ksa vkSj mPpre U;k;ky; }kjk tkjh dh

xbZ fofèrj fu;eksa] fofu;eksa] vkns'kksa rFkk ladYiksa ls lacaf/kr vf/klwpuk,a]

[Notifications relating to Non-Statutory Rules, Regulations, Orders and

Resolutions issued by the Ministries of the Government of India

(other than the Ministry of Defence) and by the Supreme Court]

——————

व  मंालय

नई द ल, दनांक 29 फरवर 2016

संक प

सं. 06/19/2013-ट स--संशो#धत पुनग( ठत *ौ,यो#गक- उ/ नयन 0न#ध योजना (आरआरटयूएफएस) के 8लए 9व: तीय और

*चलना: मक मानदंड और ?@या/ वयन वाले दशा0नदAश को इस मंालय के दनांक 04/10/2013 के समसंD यक संक प के माE यम से

अ#धसू#चत ?कया गया था। उI त दशा0नदAश मJ आं8शक संशोधन करते हुए दनांक 17.09.2014 से 12.01.2016 तक लंMबत यूआईडी

आवेदनO पर 9वचार करने के 8लए 0नP न8लQखत संशोधन ?कए गए हS:-

1.

9व: तीय मानदंड

1.1

बजट आबंटन: संशो#धत पुनग( ठत *ौ,यो#गक- उ/ नयन 0न#ध योजना (आरआरटयूएफएस) िजसे दनांक 17.09.2014 से

12.01.2016 क- आधी रात तक आईटयूएफएस सॉ टवेयर मJ अपलोड ?कया गया था, के अंतग(त लंMबत 9व8शW ट पहचान संD या

(यूआईडी) आवेदनO के 8लए यूआईडी जार करने के 8लए इस योजना के अंतग(त बजट आबंटन उI त आबंटन के 1 *0तशत क-

दर से *शा स0नक लागत स हत 4005 करोड़ Zपए है।

1.2

त: कालन संशो#धत टयूएफएस (सूची-। एवं सूची-।।), आरटयूएफएस और आरआरटयूएफएस के अंतग(त 31 माच(, 2022 तक

 वीकृत मामलO क- *0तब] देयताओं के 9व_] दावO पर 9वचार करने के 8लए 8666 करोड़ Zपए क- रा8श भी 0न द(W ट क- गई

है। त: कालन संशो#धत टयूएफएस (सूची-। एवं सूची-।।), आरटयूएफएस के अंतग(त  वीकृत मामलO क- *0तब] देयताओं का

8मलान ?कया जा रहा है।

1.3

यह दोहराया जाता है ?क  टSड अलोन िप0नंग सेI टर पर कुल सिbसडी *वाह 26% से अ#धक नहं होगा।

2.

*चालनशील मानदंड

2.1

एक आईटयूएफएस सॉ टवेयर क-  थापना क- गई है। ऋणदाता एजJ8सयO और f यिIतगत आवेदकO ने आरआरटयूएफएस के

अंतग(त यूआईडी जार करने के 8लए दनांक 17.9.2014 से 12.1.2016 क- आधी रात तक आरआरटयूएफएस के अंतग(त

 वीकृत आव#धक ऋण का b यौरा अपलोड ?कया था।

2.2

यूआईडी संD या जार करने के 8लए ऐसे आवेदनO के संबंध मJ उसी @म के अनुसार िजसमJ वे इस योजना के अंतग(त पाता और

0न#धयO क- उपलb धता क- शत( पर व  आयुI त का काया(लय मJ के/ hय सव(र पर आईटयूएफएस सॉ टवेयर मJ *ाi त होते हS,

पहले आओ-पहले पाओ के आधार पर 9वचार ?कया जाएगा।

2.3 आरआरटयूएफएस पर संक प के पैरा V-1(vi) के संदभ( मJ पहले से अपलोmडड और दनांक 17.9.2014 से 12.1.2016 क-

आधी रात तक यूआईडी आवेदकO के संबंध मJ nे और ऋण रा8श मJ ?कसी पoरवत(न क- अनुम0त नहं द जाएगी।

2.4

यूआईडी संD या *ाi त करने के 8लए * तुत क- गई सूचना/द तावेजO के सह होने क- िजP मेवार संबं#धत आवेदक तथा ऋणदाता

एजJसी (यO) क- होगी।

2.5

इकाई ,वारा सभी मशीनर क-  थापना

2.5.1

आवेदक को यह सु0निpचत करना चा हए ?क बJचमाक( वाल सभी पा मशीनर के 9व0नमा(ण का वष(, 9व0नमा(ता का नाम और

@मांक संD या मशीन (नO) पर  पW ट _प से 9व0न द(W ट क- गई है। कुल 8मलाकर, एक ‘मशीन पहचान कोड’ (एमआईसी) व 

आयुI त ,वारा आबं टत क- जाएगी जो इस योजना के अंतग(त खरद गई *: येक मशीन के 8लए एक 9व8शW ट पहचान संD या

होगी। यह एमआईसी मशीनर पर अ0नवाय( _प से उ: क-ण( ?कया जाएगा और समय-समय पर *: यn स: यापन के दौरान

स: या9पत क- जाएगी।

256

Hkkjr dk jkti=] ekpZ 12] 2016 ¼QkYxqu 22] 1937½

[Hkkx I—[k.M 1

2.5.2

एमआईसी का 0नण(य देश-कोड, राt य/*ांत कोड, मशीन 9व0नमा(ता कोड (जैसा ?क योजना मJ 9व0न द(W ट ?कया गया है), मशीन

9व0नमा(ता के अ#धकृत एजJट कोड, वाQणिtयक बीजक संD या, आयात प संD या और लदान Mबल संD या (केवल आया0तक

मशीनर के मामले मJ), मशीन @मांक संD या आ द के आधार पर ?कया जाएगा।

3.

यूआईडी रu करने का *ावधान

3.1

इस योजना के अंतग(त जार ?कए गए यूआईडी उन मामलO मJ रu कर दए जाएंगJ जहां:

3.1.1

आवेदक ?कसी कारण से इस योजना के अंतग(त लाभ लेने का 0नण(य नहं लेता है िजसके 8लए उसने आईटयूएफएस सॉ टवेयर

का *योग करके संबं#धत ऋणदाता एजJसी के माE यम से जार क- गई यूआईडी को रu करने के 8लए अनुरोध अपलोड ?कया है।

यह अनुरोध 0नधा(oरत *प-। मJ ?कया जाना चा हए।

3.1.2

?कसी  तर पर आवेदन रu कर दए जाने पर यूआईडी  वत: 0नर त हो जाएगा।

4.

दु_पयोग के 9व_] सुरnा

इस योजना के अंतग(त *दान क- जा रह सिbसडी के दु_पयोग से बचने के 8लए 0नP न8लQखत सुरnा क- f यव था क- गई है:

(क)

यह अ0नवाय( बनाया जाए ?क सभी पा मशीनर का नाम, 0नमा(ण का वष(,9व0नमा(ता का नाम और @म संD या तथा व 

आयुI त ,वारा आबं टत एमआईसी संD या मशीन पर  पW ट _प से उ: क-ण( ?कया जाना चा हए।

(ख)

व  आयुI त ,वारा ग ठत ?कए जाने वाले एक संयुI त 0नरnण दल (जेआईट) *0तपू0त( के 8लए दावO क- जांच करते समय

इस योजना के अंतग(त अलग ?कए गए नमूना मामलO के _प मJ इकाई ,वारा  था9पत क- गई मशीनर/बनाई गई पoरसंपि:तयO

का भौ0तक स: यापन करेगा।

5.

8शकायत 0नवारण तं

5.1

इस योजना के ?@या/ वयन से संबं#धत 0नधा(oरत *प मJ *ाi त सभी 8शकायतO का 0नवारण, व  आयुI त क- अE यnता मJ

ग ठत एक 8शकायत स8म0त िजसमJ व  मंालय, ऋणदाता एजJ8सयO और औ,यो#गक संघO आ द के *0त0न#ध होते हS, ,वारा

?कया जाएगा।

5.2

नी0तगत मामले और त: संबंधी टi पणी से संबं#धत 8शकायतO को स#चव, व  मंालय, भारत सरकार को 0नधा(oरत *प मJ

* तुत करना अपेwnत होगा जो इसका 0नवारण करJगे।

आदेश

आदेश दया जाता है ?क इस संक प को सामा/ य सूचना हेतु भारत सरकार के राजप मJ *का8शत ?कया जाए।

यह भी आदेश दया जाता है ?क इस संक प क- *0तयां संबं#धत मंालयO/9वभागO/संगठनO को *े9षत क- जाएं।

पुW पा सुxहमy यम

अपर स#चव

*प-1

भाग । (लाभzाह ,वारा * तुत ?कया जाए)

संबं#धत ऋणदाता एजJसी के माE यम से एटयूएफएस के अंतग(त जार यूआईडी रu करना

नोट : दूसर ऋण *दाता एजJसी मJ पoरवत(न के समय इकाई को यह सु0निpचत करना होगा ?क नई ऋण*दाता एजJसी एटयूएफएस के

अंतग(त शा8मल है।

1.

यूआईडी संD या

 वत: तैयार क- गई

2.

यूआईडी अनुमोदन क- तारख

 वत: तैयार क- गई

3.

इकाई का नाम

 वत: तैयार क- गई

4.

इकाई का पता

 वत: तैयार क- गई

5.

इकाई क- ई-मेल आईडी

 वत: तैयार क- गई

6.

पैन संD या

 वत: तैयार क- गई

7.

आव#धक ऋण  वीकृ0त क- तारख

 वत: तैयार क- गई

Hkkx I—[k.M 1]

Hkkjr dk jkti=] ekpZ 12] 2016 ¼QkYxqu 22] 1937½

257

8.

पoरयोजना लागत Zपए मJ

 वत: तैयार क- गई

9.

दावा ?कया गया nे

 वत: तैयार क- गई

10.

ऋणदाता एजJसी का नाम

 वत: तैयार क- गई

11.

ऋणदाता एजJसी का पता

 वत: तैयार क- गई

12.

ऋणदाता एजJसी का शाखा कोड

 वत: तैयार क- गई

13.

 वीकृत आव#धक ऋण Zपए मJ

 वत: तैयार क- गई

14.

*मोटर का अंशदान Zपए मJ

 वत: तैयार क- गई

15.

आव#धक ऋण का खाता संD या

 वत: तैयार क- गई

16.

यूआईडी के अनुसार पूव( *ा#धकृत कुल सिbसडी मू य Zपए मJ

 वत: तैयार क- गई

17.

जार क- गई यूआईडी रu ?कए जाने का कारण

*माQणत ?कया जाता है ?क:

इस *प मJ द गई सूचना सह हS एवं स: य हS और मS/हम

व  आयुI त का काया(लय ,वारा जार क- गई

उI त् यूआईडी को 0नर त करने का अनुरोध करते हS। इसके अलावा मS/हम व  आयुI त का काया(लय ,वारा जार क- गई उपरोI त

यूआईडी के संबंध मJ कभी ?कसी सिbसडी का पूण( अथवा आं8शक दावा नहं करJगJ।

 थान:

(ह ताnर)

दनांक

(*ा#धकृत ह ताnर का नाम एवं पदनाम)

नोट: कृपया *ा#धकृत ह ताnर के ह ताnर के साथ कंपनी/इकाई क- सील/रबर  टSप लगाएं।

भाग ।। (ऋणदाता ,वारा जार क- जाए)

संबं#धत ऋणदाता एजJसी ,वारा एटयूएफएस के अंतग(त जार यूआईडी रu करना

*माQणता ?कया जाता है ?क :

आवेदक ,वारा *प-। के भाग-। मJ द गई सूचना हमारे बSक के पास उपलb ध oरकाड( के आधार पर सह पाई गई है।

*प-8 के भाग-। मJ आवेदक इकाई ,वारा * तुत ?कए गए कारणO से, मS/हम

एत,वारा आवेदक इकाई को

व  आयुI त का काया(लय ,वारा जार यूआईडी संD या रu करने क- 8सफाoरश करते हS।

————————————

संक प

सं.06/15/2015-ट स——संशो#धत *ौ,यो#गक- उ/ नयन 0न#ध योजना (एटयूएफएस) व  मंालय के दनांक 13/01/2016 के

समसंD यक संक प के माE यम से अ#धसू#चत क- गयी है। उI त संक प के साथ एटयूएफएस के दशा0नदAश अथा(त दनांक 17.09.2014

से 12.01.2016 तक इसके ?@या/ वयन अव#ध के दौरान एटयूएफएस के 9व: तीय और *चालना: मक मानदंड और ?@या/ वयन तं नीचे

दए गए है:-

1.

उuेp य:

1.1

देश मJ f यवसाय को आसान बनाने और 9व0नमा(ण मJ ‘’जीरो इफेI ट और जीरो mडफेI ट’’ के साथ ‘’मेक इन इंmडया’’ के माE यम

से रोजगार का सृजन करने तथा 0नया(त को बढ़ावा देने के ~िW टकोण को *ाi त करने के 8लए यह 0नण(य 8लया गया है ?क

सरकार संशो#धत *ौ,यो#गक- उ/ नयन 0न#ध योजना (एटयूएफएस) के अंतग(त पूंजी 0नवेश सिb सडी (सीआईएस) *दान करेगी।

1.2

यह योजना व  उ,योग मJ आयात  थानाप/ न के साथ 0नवेश, उ: पादI ता, गुणव: ता, रोजगार, 0नया(त को बढ़ावा देने को

सु9वधाजनक बनाएगी। यह व  मशीनर (बJचमाक( *ौ,यो#गक- वाल) के 0नमा(ण मJ 0नवेश को अ*: यn _प से भी बढ़ावा देगी।

2.

योजना क- पoरभाषाएं

2.1

*ौ,यो#गक- उ/ नयन का ता: पय( व  उ,योग अ: याधु0नक अथवा लगभग अ: याधु0नक *ौ,यो#गक- को शा8मल करना है।

मशीनर के *ौ,यो#गक- के  तरO को तकनीक- सलाहकार एवं मॉनीटoरंग स8म0त (टएएमसी) ,वारा वा9ष(क आधार पर अE यतन

258

Hkkjr dk jkti=] ekpZ 12] 2016 ¼QkYxqu 22] 1937½

[Hkkx I—[k.M 1

और 0न द( W ट ?कया जाएगा। 0न द(W ट सीमा से कम *ौ,यो#गक-  तर वाल मशीनर को एटयूएफएस योजना के अंतग(त

9व: त पोषण क- अनुम0त नहं है।

2.2

पूंजी 0नवेश सिb सडी: (सीआईएस) का ता: पय( इस योजना के अंतग(त *: येक nे के 8लए बे/ चमाक( वाल नई मशीनर क- खरद

के 8लए ‘’साव#ध पूंजी 0नवेश’’ मJ ?कए गए 0नवेश पर nे क- 0नधा(oरत दर पर सिb सडी है िजसका 0नधा(रण कंपनी ,वारा इसक-

 थापना के पp चात बे/ च माक( मशीनर क- *ाथ8मक लागत पर ?कया जाएगा।

2.3

गामA/ ट/अपैरल/मेड-अi स: का ता: पय( पहनने यो• य अथवा गैर-पहनने यो• य 8सले-8सलाए फैMxक से है िजसके कम से कम दो

?कनारO को 8सलाई मशीन का *योग करके 8सला जाता है।

2.4

तकनीक- व : का ता: पय( सजावट अथवा साज-सt जा क- अपेnा उनके तकनीक- 0नW पादन और काय(कार पoरसP पि: तयO के

8लए *ाथ8मक _प से *योग क- गई साम#zयO और उ: पाद है जहां काय( *ाथ8मक मानदंड है। तकनीक- व  मJ आटोमो टव

अनु*योग, मेmडकल टेI सटाइल, िजयो-टेकसटाइल, एzो-टेI सटाइल, *ोटेिI टव I लो दंग, पाक( टेक आ द शा8मल है।

2.5

एटयूएफएस के लाभ योजना के अंतग(त बे/ चमाक( मशीनर के 8लए उपलb ध हS िजसके अंतग(त 0नP न8लQखत काय(कलाप

शा8मल हS:-

क)

वी9वंग, वी9वंग *ीपेरेटर और 0न टंग

ख)

फाइबर क- *ोसे8संग, यान(, फैMxI स, गाम€ट, और मेड-अi स।

ग)

तकनीक- व 

घ)

गाम€ट/मेड-अi स 0नमा(ण

ड.)

हथकरघा nे

च)

रेशम nे

छ)

पटसन nे

3.

पूंजी 0नवेश सिbसडी *दान करने के 8लए पाता मानदंड

3.1

एटयूएफएस के अंतग(त 0न द(W ट nेO मJ पा बSचमाक( वाल मशीनर पर 0नवेश के 8लए पूंजी 0नवेश सिbसडी उपलb ध होगी।

बJचमाक( वाल पा मशीनर को तकनीक- सलाहकार एवं मॉनीटoरंग स8म0त (टएएमसी) ,वारा *: येक वष( 1 अ*ैल को अE यतन

और 0न द( W ट ?कया जाएगा। व  आयुI त टएएमसी के अनुमोदन के पp चात पा मशीनर क- सूची को अ#धसू#चत करJगे। इस

योजना के 0न द(W ट सीमा से कम *ौ,यो#गक-  तर वाल मशीनर सिbसडी के लाभ के 8लए पा नहं होगी। सभी पा मशीनर

के 0नमा(ण और वष( या तो मशीन पर अथवा मशीन पर संल• न नाम प‚ पर  पW ट _प से 0न द(W ट ?कया जाना चा हए।

3.2

मशीन 0नमा(ता अथवा उनके *ा#धकृत एजJटO से सीधे खरद गई मशीन को इस योजना के अंतग(त लाभ के 8लए 9वचार ?कया

जाएगा। तथा9प, यह लाभ पैरा 4.2.6 के अनुसार खरद गई पoरधान मशीनर के 8लए भी उपलb ध होगा।

4

पाता क- सामा/ य शत€

4.1

इकाईयO के *कार:

4.1.1

कंपनी अ#ध0नयम, 1956 अथवा कंपनी अ#ध0नयम, 2013 अथवा कंपनी (संशोधन), 2015 के अंतग(त अथवा कंप0नयO के

रिज ƒार के पास उI त अ#ध0नयम के संशोधन मJ ?कए गए *ावधानO के अनुसार पंजीकृत कंप0नयां/इकाइयां और उन

एमएसएमई इकाइयO, िज/ हJ एमएसएमई मंालय के 0नदAशO ,वारा संचा8लत ?कया जाएगा अथवा वे इकाइयां जो पंजीकरण के

काय(कलाप को  पW ट _प से *द8श(त करते हुए संबं#धत राt य सरकार के 0नदेशालयO के साथ पंजीकृत हS, को छोड़कर

औ,यो#गक नी0त एवं संवध(न 9वभाग के पास औ,यो#गक उ,यम „ापन (आईइएम) क- पावती है, ह इस योजना के लाभ *ाi त

करने के 8लए पा हOगी (गैर-एमएसएमई इकाइयO के मामले मJ)।

4.1.2

मौजूदा इकाइयां और नई इकाइयां ?कसी f यिI तगत कंपनी के 8लए 0नधा(oरत समz सीमा के भीतर सिb सडी के 8लए पा होगी।

तथा9प, य द कंपनी ने आरआरटयूएफएस के अंतग(त सिb सडी *ाi त कर 8लया है तो वह ?कसी f यिI तगत कंपनी के 8लए

0नधा(oरत समz सीमा के भीतर शेष रा8श क- ह पा होगी,

4.1.3

हथकरघा, रेशम, पटसन इकाइयO स हत व  इकाइयां इस योजना के अंतग(त लाभ *ाi त करने के 8लए पा हS।

4.2

पा व  मशीनर के *कार:

4.2.1

एटयूएफएस योजना के अंतग(त केवल 9व0नमा(ता अथवा उनके *ा#धकृत एजJटO के नाम दशा(ते हुए 0न द(W ट nेO के 8लए नई बSच

माक( वाल मशीनर को अं0तम _प दया जाएगा और तकनीक- सलाहकार एवं मानीटoरंग स8म0त (टएएमसी) क- 8सफाoरश पर

Hkkx I—[k.M 1]

Hkkjr dk jkti=] ekpZ 12] 2016 ¼QkYxqu 22] 1937½

259

व  आयुI त ,वारा *: येक वष( 1 अ*ैल को अ#धसू#चत मशीनर को अनुम0त द जाएगी। व  आयुI त @मश: पटसन,

हथकरघा और रेशम nे के 8लए पटसन आयुI त, 9वकास आयुI त (हथकरघा) और सद य स#चव, कJ hय रेशम बोड( से पा

मशीनर क- सूची *ाi त करेगा।

4.2.2

एटयूएफएस के अंतग(त पा मशीनर क- लागत का 20% के मू य तक मशीन के साथ *ाi त उप कर/संल• नक/नमूना

मशीनJ/कलपुज€ भी पा हOगे।

4.2.3

एक nे के 8लए पा मशीनर अ/ य nेO/काय(कलापO के 8लए भी पा है बशतA इसक- पाता ?कसी 9व8शW ट nे/काय(कलाप के

8लए सी8मत न हो।

4.2.4

व  आयुI त ,वारा उस वष( 1 अ*ैल को अ#धसू#चत नहं क- गई कोई अ/ य मशीनर क- पाता को भी, य द आवp यक समझा

जाएगा तो टएएमसी क- 8सफाoरश पर बाद मJ शा8मल ?कया जा सकता है।

4.2.5

9व8शW ट पहचान संD या (यूआईडी) जार ?कए जाने को इस योजना के अंतग(त सिb सडी के 8लए पा बे/चमाक( मशीनर क- सूची

से संब] ?कया जाएगा िज/ हJ बजटय *ावधान और देयताओं के आधार पर और टएएमसी क- 8सफाoरश पर *: येक वष(

संशो#धत ?कया जाएगा।

4.2.6

मशीन 9व0नमाता(ओं अथवा उनके *ा#धकृत एजJटO से सीधे खरद गयी मशीनर (आया0तत और  वदेशी) पर इस योजना के

अंतग(त लाभ के 8लए 9वचार ?कया जाएगा। तथा9प, यह लाभ देश के भीतर िथत *ा#धकृत  टा?क ट/क टम वेयर हाऊस से

खरद गई पoरधान/अपैरल/मेड-अi स 9व0नमा(ण के 8लए अपेwnत नई आया0तत िट#चंग मशीनO के 8लए भी उपलb ध होगा बशतA

?क यह खरद उस f यिIत से क- गई हो िजसने उसे मशीन 9व0नमाता(ओं अथवा उनके *ा#धकृत एजJटO से सीधे खरदा हो ऐसी

मशीनर इस योजना के अंतग(त लाभ के 8लए पा होगी। ऐसी मशीन िजसे एक बार भी उपयोग ?कया गया हो और/अथवा

परnण के 8लए भी उपयोग ?कया गया हो, उसे इस योजना के अंतग(त कदा9प अनुम0त नहं द जाएगी।

4.2.7 खरद क- तारख से ता: पय(  वदेशी तथा आया0तत मशीनO दोनO के मामले मJ वाQणिt यक बीजक क- तारख है।

4.2.8 व  आयुI त ,वारा आवं टत मशीन पहचान कोड (एमआईसी) को संबं#धत मशीन(नO) पर  पW ट _प से 0न द(W ट ?कया जाना

चा हए िजस पर इस योजना के अंतग(त सिb सडी का दावा ?कया जाता है।

4.2.9

सहायताथ( पाता मानदy ड:

(i)

ऊपर पैरा 4.1.1 मJ यथा 0न द(W ट कंप0नयां ह इस योजना के अंतग(त लाभ *ाi त करने के 8लए लाभ *ाi त करने क- पा हOगी।

(ii)

व  मद(दO) के _प मJ 0न8म(त उ: पाद का संकेत देने वाले संबं#धत *ा#धकरण के साथ पंजीकरण एक पूव(-आवp यकता है िजसे

इस योजना के अंतग(त लाभ *ाi त करने के 8लए संयुI त 0नरnण दल (जेआईट) को मशीनर का स: यापन करते समय * तुत

?कया जाना चा हए।

4.3

अ/ य पा 0नवेश

0न द(W ट मशीनर के अलावा ?कया गया 0नवेश इस योजना के अंतग(त पा नहं होगा।

4.4

पा सिb सडी के 8लए मानक:

4.4.1

एटयूएफएस योजना के अंतग(त *: येक पा f यिI तगत इकाई को पा 0नवेश पर, नीचे 0न द(W ट दरO तथा समz सिb सडी क-

सीमा के अनुसार पूंजी 0नवेश सिb सडी (सीआईएस) *दान क- जाएगी:-

@.सं.

nे

पूंजी 0नवेश सिbसडी

क- दरJ (सीआईएस)

अलग-अलग इकाई के

अनुसार सीआईएस

1.

पoरधान, तकनीक- व 

पा मशीनO पर 15%

30 करोड़ Z.*

2.

एकदम नए शटल-र हत करघO के 8लए बुनाई (*ीपेरेटर बुनाई एवं 0न टंग

स हत), *सं करण, पटसन, रेशम तथा हथकरघा

पा मशीनO पर 10%

20 करोड़ Z.*

3(क)

8म#ˆत इकाई/म  टपल nेO-य द पoरधान एवं तकनीक- व  ˆेणी के

संबंध मJ पा पूंजी 0नवेश पा पoरयोजना लागत से 50% अ#धक है।

पा मशीनO पर 15%

30 करोड़ Z.*

3(ख)

8म#ˆत इकाई/म  टपल nेO-य द पoरधान एवं तकनीक- व  ˆेणी के

संबंध मJ पा पूंजी 0नवेश 50% से कम है तो सिbसडी सीमा 20 करोड़

Z. होगी।

पा मशीनO पर 10%

20 करोड़ Z.*

260

Hkkjr dk jkti=] ekpZ 12] 2016 ¼QkYxqu 22] 1937½

[Hkkx I—[k.M 1

*य द आवेदक ने आरआरटयूएफएस के अंतग(त पहले ह सिb सडी *ाi त कर ल है तो वह एक f यिI तगत कंपनी के 8लए 0नधा(oरत समz

सीमा के भीतर शेष रा8श ह *दान करने का पा होगा। एटयूएफएस के अंतग(त ?कसी f यिI तगत कंपनी ,वारा समz 0नवेश क-

अ#धकतम सिb सडी सP बि/ धत nेO के 8लए ऊपर 0न द(W ट ?कए अनुसार सी8मत होगी।

4.5

सिb सडी के मानक:

4.5.1

एटयूएफएस के अंतग(त पूंजी 0नवेश सिb सडी उस 0नवेश पर, स/ तोषजनक  थापना/शु_आत तथा उ: पादन आरंभ होने के पp चात

ह, एकमुp त पूर oरलज क- जाएगी।

4.5.2 इस योजना के अंतग(त लाभ उपलb ध हOगे य द पा मशीनर अ#धसू#चत ऋणदाता एजJसी से आव#धक ऋण लेकर खरद गयी है।

4.5.3

सं थागत 9व: तपोषण के साथ ?कए गए 0नवेश के मामले मJ ह सिb सडी *दान क- जाएगी। @ेता @ेmडट, यूजJस @ेmडट और

9व@ेता @ेmडट लेकर ?कया गया 0नवेश इस योजना के अंतग(त लाभ *ाi त करने के 8लए पा होगा जब तक ?क सिb सडी का

दावा करने से पूव( लाभzाह ,वारा समz रा8श का भुगतान न कर दया गया हो अथवा इस योजना मJ 0न द(W ट समय सीमा के

भीतर संयुI त 0नरnण दल (जेआईट) ,वारा स: यापन के समय उसका ठोस द तावेजी *माण न * तुत कर दया गया हो।

4.6

अं0तम 0त#थ:

4.6.1

आव#धक ऋण क-  वीकृ0त क- तारख ऋण *दान करने वाल एजJसी के प क- तारख होगी िजसके माE यम से आव#धक ऋण

क-  वीकृ0त क- सूचना उ,यमी को द गयी है।

4.6.2 य द ऋणदाता एजJसी ,वारा आव#धक ऋण  वीकृत कर दया जाता है और उसके बाद ऋण दाता एजJसी ने आव#धक ऋण को

अ/ य ऋणदाता एजJसी(यO) को 9वतoरत/डाउन सेल कर दया है अथवा कंसो ट(यम फाइने/ स के अंतग(त आव#धक ऋण  वीकृत

कर दया है, आव#धक ऋण  वीकृत क- तारख 0नP नानुसार होगी:

(i)

आव#धक ऋण को डाउन-सेल करने के मामले मJ *थम ऋण दाता, िजसने आरP भ मJ आव#धक ऋण  वीकृत ?कया है, ,वारा

आव#धक ऋण क-  वीकृ0त क- तारख संगत तारख होगी और वह ऋण *दाता एजJसी के प क- तारख होगी िजसके माE यम

से आव#धक ऋण क-  वीकृत क- तारख क- सू चना कंपनी को द गयी है।

(ii)

कंसो ट(यम फाइने/ स के मामले मJ, कंसो ट(यम का *मुख इस योजना के अंतग(त पा आव#धक ऋण क- रा8श स हत  वयं तथा

कंसो ट(यम के अ/ य सद यO के 8लए इस योजना के अंतग(त पoरयोजना क- पाता का मू यांकन करेगी। तथा9प, इस मामले मJ

आव#धक ऋण क-  वीकृ0त क- तारख कंसो ट(यम मJ 9पछले ऋणदाता एजJसी जो आव#धक ऋण  वीकृत करता है, के प क-

तारख होगी, िजसके माE यम से कंपनी को  वीकृ0त क- सू चना द गयी है।

4.6.3

इस योजना के अंतग(त पoरयोजना के 8लए ?कसी म टपल फाइने/ स क- अनुम0त नहं है। लाभzाह को अनुबंध ‘क’ के अनुसार

0नधा(oरत *प मJ इस संबंध मJ वचन प देना होगा।

4.6.4

उपयु(I त *: येक मामले मJ यथानुपात आधार पर *: येक ऋणदाता एजJसी के ऋण वाले/आवेदक के खाते मJ सीआईएस का

सं9वतरण ?कया जाएगा।

4.6.5

य द जहां आरआरटयूएफएस के अंतग(त ऋण दाता एजJ8सयO ,वारा आव#धक ऋण  वीकृत ?कया गया है ?क/ तु आव#धक ऋण

क-  वीकृ0त क- तारख से एक वष( क- अव#ध अभी पूर नह हुई है और उन मामलO मJ जहां यूआईडी आवेदन दनांक

12.01.2016 क- आधी रात तक आई-एटयूएफएस का *योग करके व  आयुI त के सव(र मJ अभी अपलोड नहं ?कया गया है,

ऐसे मामले दनांक 13.01.2016 के संक प सं. 6/5/2015-ट स के माE यम से अ#धसू#चत एटयूएफएस योजना के अनुसार ह

लाभ क- पा होगी। ऐसे पा मामलO के आवेदकO को एटयूएफ योजना (b यौरा नीचे दया गया है) के 0नधा(0नत फामAट के

अनुसार आई-एटयूएफएस सा टवेयर का *योग करके व  आयुI त के सव(र मJ यूआईडी आवेदन अपलोड करने क- आवp यकता

होगी। इन आवेदनO को दनांक 13.01.2016 के संक प सं.6/5/2015-ट स के जार होने क- तारख से छ: महने के भीतर

अथा(त दनांक 12.07.2016 तक, पहले आओ - पहले पाओ आधार पर और बजटय *ावधानO क- उपलb धता क- शत( पर 9वचार

?कया जाएगा।

4.7

ऋण क-  वीकृ0त से पहले 0नवेश का कवरेज:

आव#धक ऋण क-  वीकृ0त क- तारख से पूव( यू0नट ,वारा मशीन क- लागत के 8लए मािज(न मनी तक अ#zम/टोकन भुगतान

?कया जा सकता है। तथा9प, आव#धक ऋण क-  वीकृ0त क- तारख को अथवा उसके बाद खरद गयी मशीनJ, अ/ य 0नयम एवं

शत‰ को पूरा करने के अE यधीन इस योजना के अंतग(त पा हOगी।

4.8

अ/ य योजनाओं के लाभ:

व  इकाइयO को,जब तक 9वशेष _प से मना न ?कया जाए, इस योजना के अंतग(त *दान ?कए गए लाभ के अलावा, राt य

सरकार क- योजनाओं के लाभ *ाi त करने क- अनुम0त है।

Hkkx I—[k.M 1]

Hkkjr dk jkti=] ekpZ 12] 2016 ¼QkYxqu 22] 1937½

261

4.9

इकाई के *बंधन का 9वलय/अ#धकार मJ लेना:

कंप0नयO/इकाइयO के 9वलय अथवा ?कसी दूसर इकाई/कंपनी ,वारा इकाई(यO)/कंपनी(यO) को अ#धकार मJ लेने के मामले मJ नई

इकाई/कंपनी इस योजना के अंतग(त इस शत( के अधीन सिbसडी क- शेष रा8श, य द कोई बकाया हो, *ाi त करने क- हकदार

होगी, ?क 9वलय/अ#धकार मJ लेने क- अनुम0त या तो कंप0नयO के पंजीयक ,वारा अथवा माननीय उŠ च / यायालय के आदेश

,वारा द गई है और नई इकाई/कंपनी ने 9वलय/अ#धकार मJ ल गयी ईकाई/कंपनी क- सभी देयताओं और पoरसP पि: तयO को

अ#धकार मJ ले 8लया है और संबं#धत बSक ने भी मौजूदा कंपनी/इकाई िजसने उसे अ#धकार मJ 8लया है, के नाम मJ पूव(वत‹

कंपनी/इकाई का आव#धक ऋण भी ह ता/ तoरत कर दया है। तथा9प, ऐसे मामलO मJ नई इकाई/कंपनी आई-एटयूएफएस

सा टवेयर के माE यम से 9वलय क- गयी कंपनी/इकाई का *ोफाइल पoरव0त(त करने के 8लए सभी सहायक द तावेजO के साथ

अनुबंध ‘ख’ के अनुसार 0नधा(oरत *प मJ व  आयुI त को आवेदन * तुत करेगा।

5.

9व: तीय मानदंड:

5.1

संशो#धत *ौ,यो#गक- उ/ नयन 0न#ध योजना (एटयूएफएस) के अंतग(त नीचे द गयी 0नयम एवं शत‰ के अE यधीन ऋण *दान

?कए जाएंगे:

5.1.1.

*0तभू0त, ऋण इिI वट अनुपात, पहले वष( क- लाभ क- ि थ0त, 0नवल मू य आ द जैसे 9व: तीय मानदंड ऋणदाता एजJसी के

मौजूदा मानदंडO के अनुसार हOगे।

5.1.2.

चूं?क यह योजना @ेmडट 8लंI ड है, उ,यमी को इस योजना के अंतग(त पा बनने के 8लए कुल पoरयोजना लागत का / यूनतम

50% के _प मJ मशीनर के आव#धक ऋण घटक को बनाया रखना अपेwnत होगा।

5.1.3.

इस योजना के अंतग(त साव(ज0नक nे के सभी बSक, राt य 9व: तीय 0नगम (एसएफसी), राt य औ,यो#गक 9वकास 0नगम

(एसआईडीसी), अ#धसू#चत बSक और आरबीआई के साथ पंजीकृत एनबीएफसी 9व: त पोषण के 8लए पा हS।

5.1.4.

दनांक 04.10.2013 के संक प सं 6/19/2013-ट स के अनुसार आरआरटयूएफएस के अंतग(त शा8मल ऋण दाता एजJ8सयां

 वत: इस योजना के अंतग(त शा8मल हो जाएंगी और नए ऋण दाता एजJसी(यO) को अनुबंध ‘ग’ के अनुसार 0नधा(oरत *प मJ

आई-एटयूएफएस सा टवेयर के माE यम से व  आयुI त, मुंबई को अपना आवेदन * तुत करना होगा ता?क उस एटयूएफएस

के अंतग(त ऋण दाता एजJसी को अ#धसू#चत ?कया जा सके।

5.1.5

9वदेशी मुhा ऋण: इस योजना के अंतग(त लाभ हेतु इंmडयन बSक क- 9वदेशी शाखा/9वदेशी बSक वाल भारतीय शाखा से 9वदेशी

मुhा ऋण क- सु9वधा के 8लए पा हOगJ। तथा9प, ऋण खाते का संचालन भारतीय शाखा से ?कया जाना चा हए ता?क भारतीय

शाखा मJ आवेदक के ऋण खाते मJ भारतीय _पए मJ सिbसडी क- रा8श  थानांतoरत करना संभव हो सके।

5.2

योजना के अंतग(त आव#धक ऋण क- अव#ध

5.2.1

योजना के लाभ क- सु9वधा के 8लए  वीकृत ?कए गए आव#धक ऋण क- अव#ध एसएसआई इकाइयO के 8लए मोरेटोoरयम अव#ध

स हत 3 वष( से कम नहं होनी चा हए और अ/ य ˆेQणयO के 8लए 5 वष( से कम नहं होनी चा हए।

5.2.2

सिbसडी के गलत उपयोग को रोकने के 8लए आशा क- जाती है ?क इकाई को कम से कम ऊपर 0न द(W ट आव#धक ऋण क-

अव#ध के 8लए काय( करना चा हए।

5.3

संघ (कंसो ट(यम) 9व: त के मामले मJ, योजना के अंतग(त अव#ध ऋण क- पा रा8श स हत संघ (कंसो ट(यम) के *मुख और अ/ य

सद यO के 8लए भी पoरयोजना क- पाता का 0नधा(रण करेगा।

5.4

एक ऋणदाता एजJसी से दूसर ऋणदाता एजJसी को एटयूएफएस ऋण का  थानांतरण

एक ऋण *दाता एजJसी से दूसर ऋण *दाता एजJसी को टयूएफएस ऋण का  थानांतरण इस योजना के अंतग(त ऋण खाते क-

बकाया मूलधन रा8श केवल एक बार एक ऋण *दाता एजJसी से दूसर ऋण *दाता एजJसी को  थानांतoरत ?कया जा सकता है

बशतA ?क पोट(फो8लयो (अथा(त शेष मूलधन रा8श) अपoरव0त(त रहती है।

5.5

Zपए आव#धक ऋण को 9वदेशी मुhा ऋण तथा 9वलोमत: पoरवत(न:

Zपया आव#धक ऋण (आरटएल) को 9वदेशी मुhा ऋण (एफसीएल) तथा 9वलोमत: पoरवत(न क- अनुम0त है।

6.

?@या/ वयन तं:

6.1

योजना का ?@या/ वयन व  आयुI त ,वारा अपने nेीय/राt य काया(लयO के माE यम से ?कया जाएगा। व  आयुI त का

काया(लय के राt य/nेीय  तर के काया(लय *: येक राt य मJ  था9पत ?कए गए हS जो *ाथ8मकता पर एटयूएफएस का

?@या/ वयन एवं मॉनीटर करJगJ। योजना का ?@या/ वयन 5 चरण *?@याओं मJ ?कया जाएगा:

चरण 1: कंपनी/इकाई/आवेदक ,वारा राt य/व  आयुI त के nेीय काया(लय जो ऋण दाता एजJसी ,वारा आव#धक ऋण क-

 वीकृती *दान करेगा, को * तुत ?कए गए आवेदन क- *0त स हत आव#धक ऋण का आवेदन * तुत करना।

262

Hkkjr dk jkti=] ekpZ 12] 2016 ¼QkYxqu 22] 1937½

[Hkkx I—[k.M 1

चरण 2: योजना के अंतग(त सिbसडी के *ा#धकरण-पूव( के 8लए आई-ट स सॉ टवेयर *योग करते हुए ऋण *दाता एजJसी के

माE यम से कंपनी/इकाई/आवेदक ,वारा व  युI त को 9व8शW ट पहचान संD या (यूआईडी) के 8लए आवेदन और यूआईडी को जार

करना।

चरण 3: मशीनर क-  थापना।

चरण 4: इकाई ,वारा व  आयुI त को सिbसडी दावे क- ऑनलाइन * तु0त और व  आयुI त ,वारा दावO को व  मंालय

को अzे8शत करना।

चरण 5: आवेदक के खाते मJ व  मंालय ,वारा पा सिbसडी को जार करना।

6.2

?@या/ वयन एवं मॉनीटoरंग तं क- *?@या संल• न अनुबंध ‘घ’ मJ द गई है।

6.3

चरण-वार *?@या का 9व तृत b योरा 0नP नानुसार है:

6.3.1

चरण 1: कंपनी/इकाई/आवेदक ,वारा आव#धक ऋण आवेदन को * तुत करना और ऋण *दाता एजJसी ,वारा आव#धक ऋण क-

 वीकृ0त:

(I)

इस योजना के अंतग(त आवेदक/सहायता मांगने वाल इकाई इस योजना के अंतग(त आव#धक ऋण क-  वीकृ0त के 8लए

ऋणदाता एजJसी से संपक( करेगी। आवेदक मशीनर के आव#धक ऋण के घटक को कुल पoरयोजना लागत का / यूनतम

50% रखेगा ता?क वह इस योजना के अंतग(त पा हो जाए।

(II)

इस योजना के अंतग(त सहायता मांगने वाला आवेदक/इकाई कंपनी का पैन नP बर और कंपनी पंजीकरण संD या आ द और

9व तृत पoरयोजना oरपोट( (डीपीआर) जैसे b यौरे के साथ आई-एटयूएफएस सॉ टवेयर का *योग करके *प-1 (भाग-1) मJ

 वत: b यौरे भरेगा के साथ आवेदन * तुत करेगा। आई-एटयूएफएस सॉ टवेयर का *योग करके उI त b यौरO को * तुत

करने के पp चात व  आयुI त ,वारा एक एटयूएफएस संदभ( संD या जार क- जाएगी जो आई-एटयूएफएस सॉ टवेयर के

माE यम से एक *णाल ज0नत संD या होगी। य द आवेदक को आई-एटयूएफएस सॉ टवेयर के *योग पर माग(दश(न क-

आवp यकता होगी तो आवेदक 0नधा(oरत ?कए गए *प मJ आई-एटयूएफएस सॉ टवेयर के माE यम से 9ववरण अपलोड

करने मJ व  आयुI त के nेीय/राt य काया(लय क- सहायता ले सकता है और व  आयुI त का nेीय/राt य काया(लय

आवेदक को हSड होिडंग सेवाओं के भाग के _प मJ अपना आवेदन अपलोड करने मJ उसक- सहायता करेगा।

(III) ऋणदाता एजJसी आवेदक को आव#धक ऋण क-  वीकृ0त क- सूचना देगी। आव#धक ऋण क-  वीकृ0त क- 0त#थ ऋणदाता

एजJसी के प क- 0त#थ होगी िजसके ,वारा आव#धक ऋण क-  वीकृ0त से उ,यमी को सू#चत ?कया गया है।

तथा9प, ऋणदाता एजJसी ,वारा आव#धक ऋण के डाउन सै8लंग और कंस• टयम 9व:त के मामले मJ, अव#ध ऋण क-

 वीकृ0त क- 0त#थ पैरा 4.7.3, 4.7.4 तथा 4.7.5 के अनुसार होगी।

6.3.2 चरण 2: योजना के अंतग(त सिbसडी के *ा#धकरण-पूव( के 8लए आई-ट स सॉ टवेयर *योग करते हुए ऋण *दाता एजJसी के

माE यम से कंपनी/इकाई/आवेदक ,वारा व  आयुI त को 9व8शW ट पहचान संD या (यूआईडी) के 8लए आवेदन और यूआईडी को

जार करना:

आवेदक आव#धक इकाई ऋणदाता एजJसी(यO) ,वारा आव#धक ऋण क-  वीकृ0त *दान ?कए जाने के त: काल पp चात संशो#धत

डीपीआर,य द संशो#धत ?कया गया है, स हत आव#धक ऋण क-  वीकृ0त क- तारख से 6 महने के भीतर आई-एटयूएफएस का

*योग करके *प-1 (भाग-II एवं III) मJ b यौरे * तुत करेगा। य द उ,यमी को आई-एटयूएफएस सॉ टवेयर के *योग पर

माग(दश(न क- आवp यकता होगी तो आवेदक 0नधा(oरत ?कए गए *प-1 (भाग-II एवं III) मJ आई-एटयूएफएस सॉ टवेयर के

माE यम से 9ववरण अपलोड करने मJ व  आयुI त का nेीय/राt य काया(लय क- सहायता ले सकता है और व  आयुI त का

nेीय/राt य काया(लय उसे अपना आवेदन अपलोड करने मJ सहायता करेगा।

6.3.2.1 आई-एटयूएफएस के माE यम से आवेदन क- समयब] *?@या क- प]0त के साथ-साथ  वत: अलट( तं  था9पत ?कया गया है।

अलट( क- प ]0त नीचे ता8लका मJ दशा(ए अनुसार ƒे?फक लाईट प]0त पर तैयार क- गई है:

@. सं.

काय(कलाप क- समािiत के 8लए समय सीमा

का % रJज

* तुत

?कए

गए

आवेदन का रंग

1.

1% - 75% समय

zीन

2.

75% - 90% से अ#धक

येलो

3.

90% से अ#धक - 100% तक

रेड

Hkkx I—[k.M 1]

Hkkjr dk jkti=] ekpZ 12] 2016 ¼QkYxqu 22] 1937½

263

6.3.2.2 आई-एटयूएफएस सॉ टवेयर मJ आवेदन क- *ािiत के 8लए टयूएफएस पंजीकरण संD या के जार करने और उसके यूआईडी

संD या हेतु *ा#धकरण-पूव( प]0त व  आयुI त का काया(लय, मुP बई मJ चलाई जाएगी। यूआईडी संD या जार करने संबंधी

आवेदन पर योजना के अंतग(त पाता एवं 0न#ध क- उपलb धता के अE यधीन व  आयुI त का काया(लय िथत के/ hय सव(र पर

आई-एटयूएफएस सॉ टवेयर *ाi त हुए @म के अनुसार पहले आओ-पहले पाओ के आधार पर 9वचार ?कया जाएगा। तथा9प, उन

आवेदक (कO) को वरयता द जाएगी िजसमJ ऊजा( बचत *ौ,यो#गक-/मशीनर  था9पत क- गई है।

6.3.2.3 उन आवेदनO को वरयता द जाएगी िजनमJ ऊजा( बजट *ौ,यो#गक-/मशीनर  था9पत ?कए जाने का * ताव है। यह वरयता

ऊजा( बजट मशीनर के साथ आवेदक को यूआईडी संD या जार करने के 8लए पृथक कतार *ाi त करके द जाएगी और उन

आवेदकO को इस पृथक कतार मJ पहले आओ-पहले पाओ आधार पर यूआईडी संD या जार क- जाएगी। इस8लए य द ‘एन’वां

आवेदक के पp चात (एन+1)वां आवेदक ऊजा( बचत मशीनर के साथ आएगा तो वह ऊजा( बचत मशीनर के 8लए यूआईडी

आवेदकO क- कतार मJ पहला होगा और इस8लए उसे 0नय8मत कतार मJ *ाथ8मकता द जाएगी।

6.3.2.4 आव#धक ऋण क-  वीकृ0त और आवेदक ,वारा 0नधा(oरत *प-1 मJ अ/ य 9ववरण अपलोड करने तथा आई-एटयूएफएस

सॉ टेवेयर के माE यम से * तुत करते ह ई-मेल और एसएमएस सु9वधा ,वारा आवेदक को एक पावती  वत: जार क- जाएगी।

6.3.2.5 संबं#धत ऋणदाता एजJसी 0नधा(oरत *प (*प-1) मJ लाभाथ‹ ,वारा * तुत ?कए गए b यौरे का स: यापन करेगी। य द ऋण

*दाता एजJसी ,वारा अपेwnत आंकड़े सभी *कार से पूण( पाए जाते हS तो वह उI त आंकड़O और आवेदक ,वारा *प-1 मJ * तुत

करने क- 0त#थ से दो महने के अंदर आई-एटयूएफएस सॉ टवेयर मJ व  आयुI त का काया(लय को 0नधा(oरत ?कए गए *प

(*प-2) मJ 9ववरण को अपलोड करेगा। दो महने क- समय सीमा मJ आवेदक ,वारा *प-1 मJ संशोधन समय शा8मल है, य द

अपेwnत है।

6.3.2.6 य द आवेदक ,वारा आई-एटयूएफएस सॉ टवेयर के माE यम से * तुत ?कए गए आवेदन को ऋण *दाता एजJसी को आवेदन

* तुत करने क- 0त#थ से 45 दनO के भीतर जांच नहं क- गई है, तो ऋण *दाता एजJसी (यO) को आई-एटयूएफएस के माE यम

से *णाल ज0नत येलो अलट( भेजा जाएगा। यह मामले को त: का8लक आधार पर हाथ मJ लेने के 8लए ऋण *दाता एजJसी (यO)

को अलट( करेगा। इसके अ0तoरI त, य द अगले नौ (9) दनO मJ संबं#धत ऋण *दाता एजJसी (यO) ,वारा कोई कार(वाई नहं क-

जाती है, तो ऋण *दाता एजJसी (यO) के संबं#धत अ#धकार (यO) के साथ मामले को उठाने के 8लए उनके काय(कार

0नदेशक/सीजीएम को एक *णाल जन हत रेड अलट( भेजा जाएगा ता?क मामले को त: काल आगे बढ़ाया जा सके। य द ऋण

*दाता एजJसी (यO) आई-एटयूएफएस के माE यम से आवेदन क- *ािiत क- 0त#थ से दो महने के अंदर आवेदन * तुत करने मJ

असफल होती है, तो इसे उI त दशा0नदAशO का उ लंघन समझा जाएगा।

6.3.2.7 यूआईडी आवेदन जो सभी *कार से पूण( पाए गए हS, 0नधा(oरत ?कए गए *प (*प-3) के अनुसार अ0नवाय( 9ववरण क- जांच के

पp चात यूआईडी संD या के आबंटन हेतु व  आयुI त का काया(लय मJ एक (1) महने के अंदर आगे बढ़ाया जाएगा और यूआईडी

जार ?कया जाएगा। यूआईडी संD या *ाi त करने के 8लए * तुत क- गई सूचना/द तावेज क- स: यता क- िजP मेदार आवेदक और

संबं#धत ऋण *दाता एजJसी (यO) क- होगी।

6.3.2.8 य द कोई  पW ट 9वसंग0त होती है तो यूआईडी आवेदन को आई-एटयूएफएस सॉ टवेयर के माE यम से आवेदक और/अथवा

संबं#धत ऋण *दाता एजJसी को संशोधन और पुन: * तुत करने के 8लए वापस कर दया जाएगा। आवेदन को पुन: * तुत करने

क- अ#धकतम अव#ध एक महने होगी और इसे पुन: पहले आओ-पहले पाओ के आधार पर 9वचार ?कया जाएगा।

6.3.2.9 व  आयुI त का काया(लय मJ संबं#धत अ#धकाoरयO को एक *णाल ज0नत यलो अलट( भेजा जाएगा, य द ऋण *दाता एजJसी से

*ाi त आवेदन पर तेइस (23) दनO के भीतर कोई कार(वाई नहं क- गई है। य द ऋण *दाता एजJसी से *ाi त आवेदन के

स: ताइस (27) दनO के भीतर संबं#धत अ#धकार ,वारा कोई कार(वाई नहं क- गई है, तो उनके 0नयंक अ#धकार को *णाल

ज0नत रेड अलट( भेजा जाएगा और 0नयंक अ#धकार यह सु0निpचत करेगा ?क आवेदन पर त: काल समय पर आवp यक कार(वाई

क- गई है।

6.3.2.10 आई-एटयूएफएस सॉ टवेयर मJ यूआईडी संD या जार करने के 8लए केवल आवेदन * तुत करने से योजना के अंतग(त यूआईडी

संD या और सिbस डी जार करने के 8लए इकाई हकदार नहं होगी। व  आयुI त ,वारा यूआईडी संD या जार करने के पp चात ह

कोई इकाई योजना के अंतगत( सिbसडी के 8लए पा होगी।

6.3.2.11 आई-एटयूएफएस सॉ टवेयर इस तरह बनाया गया है ?क कोई यूआईडी जार नहं क- जा सकती य द उस इकाई (*ा#धकरण

पूव( आरआरटयूएफएस स हत) क- सिbसडी सीमा पूर हो गई है अथवा/और बजट *ावधान ख: म हो गया है।

6.3.2.12 आंकड़ा संबंधी स: य0नW ठा और योजना के ?कसी संभा9वत दु_पयोग को रोकने क- सु0निpचतता के उ~देp य से व  आयुI त के

वेब पोट(ल के माE यम से लाभाथ‹ ,वारा * तुत ?कए गए और संबं#धत ऋण *दाता एजJसी ,वारा *माQणत आंकड़े को

264

Hkkjr dk jkti=] ekpZ 12] 2016 ¼QkYxqu 22] 1937½

[Hkkx I—[k.M 1

अपoरवत(नीय माना जाएगा और सिbसडी भुगतान पा सिbसडी के *: यn मू यांकन अथवा अपoरवत(नीय आंकड़े, जो भी कम

हो, के अनुसार माना जाएगा।

6.3.2.13 जार क- गई यूआईडी मJ ?कसी  पW ट गलती अथवा इसके ?@या/ वयन के दौरान पoरयोजना मJ संशोधन के मामले

मJ, एटयूएफएस के अंतग(त 0न#धयO क- उपलb धता के अE यधीन यूआईडी जार करने क- 0त#थ से एक साल के अंदर व 

आयुI त ,वारा मामला दर मामला के आधार पर यूआईडी 9ववरण मJ एक बारगी सुधार करने पर 9वचार ?कया जाएगा/अनुम0त

द जाएगी बशेतA ?क सिbसडी मJ कोई वृ9] नहं होगी।

6.4

चरण 3: मशीनर क-  थापना

6.4.1 इस योजना के अंतग(त 0न द(W ट केवल बSच माक( पा मशीनर को ह इकाई ,वारा  था9पत ?कया जाएगा।

6.4.2 आवेदक को यह सु0निpचत करना चा हए ?क बJचमाक( वाल सभी पा मशीनर के 9व0नमा(ण का वष(, 9व0नमा(ता का नाम और

@मांक संD या मशीन (नO) पर  पW ट _प से 9व0न द(W ट क- गई है। कुल 8मलाकर, एक ‘मशीन पहचान कोड’ (एमआईसी) व 

आयुI त ,वारा आबं टत क- जाएगी जो इस योजना के अंतग(त खरद गई *: येक मशीन के 8लए एक 9व8शW ट पहचान संD या

होगी। यह एमआईसी मशीनर पर अ0नवाय( _प से उ: क-ण( ?कया जाएगा और समय-समय पर *: यn स: यापन के दौरान

स: या9पत क- जाएगी।

6.4.3.

यह अ#धदेश है ?क मशीन @मांक सD ंया 8श9पंग द तावेजO अथा(त ‘वाQणिtयक बीजक’ अथवा ‘लदान Mबल’ अथवा ‘हवाई भाड़ा

Mबल’ पर  पW ट _प से 8लखा जाना चा हए अथवा यह आया0तत मशीनर के मामले मJ ‘आयात प’ मJ  पW ट _प से 8लखा गया

है। घरेलू खरद के मामले मJ, मशीन @मांक संD या ‘वाQणिtयक बीजक’ मJ  पW ट _प से उ लेख ?कया जाना चा हए। इन

दशा0नदAशO के अंतग(त 01.04.2016 से यह ज_रत का अ0नवाय( ह सा है और आवेदक को एमआईसी संD या स•पना अ0नवाय(

होगा। इस8लए इस योजना के अंतग(त इस सूचना क- गैरमौजूदगी के कारण लाभ हेतु मशीनर अयो• य ठहराई जाएगी।

6.4.4

एमआईसी का 0नण(य देश-कोड, राt य/*ांत कोड, मशीन 9व0नमा(ता कोड (जैसा ?क योजना मJ 9व0न द(W ट ?कया गया है), मशीन

9व0नमा(ता के अ#धकृत एजJट कोड, वाQणिtयक बीजक संD या, आयात प संD या और लदान Mबल संD या (केवल आया0तक

मशीनर के मामले मJ), मशीन @मांक संD या आ द के आधार पर ?कया जाएगा।

6.4.5

उI त *णाल ज0नत एमआईसी आवेदक को व  आयुI त ,वारा त: काल आबं टत क- जाएगी जब वह मशीनर के

सं थापन/शु_आत के पp चात संयुI त 0नरnण दल (जेआईट) स: यापन हेतु अनुरोध करेगा।

6.4.6

यूआईडी के अंतग(त शा8मल क- गई मशीनO के सं थापन/शु_आत अव#ध ऋण क-  वीकृ0त क- 0त#थ से एक (1) वष( के भीतर

िजसे व  आयुI त के अनुमोदन से उ#चत औ#च: य के साथ मामला दर मामला आधार पर दो (2) वष‰ तक 9व तार यो• य

है, क- जाएगी। इसके 8लए चाटAड इंजी0नयर से एक *माण प भी ?कया जाएगा िजसे सं था9पत मशीनर के *: यn स: यापन के

समय जेआईट को * तुत भी ?कया जाएगा।

6.4.7 य द आवेदक मशीनर के सं थापन/इसक- शु_आत क- *?@या को तेज करने हेतु आव#धक ऋण क-  वीकृ0त 0त#थ से दस (10)

माह क- अव#ध के दौरान सं था9पत मशीनर,िजसके 8लए यूआईडी *ाi त ?कया गया था, के *: यn स: यापन हेतु अपना अनुरोध

* तुत नहं करता है तो आवेदक को पंजीकृत ई-मेल अथवा एसएमएस के माE यम से पहला *णाल ज0नत अनु मारक भेजा

जाएगा।

6.5

चरण 4: इकाई ,वारा व  आयुI त के समn सिbसडी दावे * तुत करना तथा उनका अनुमोदन।

6.5.1

मशीनर के संतोषजनक सं थापन/*ारंभ ?कए जाने और वाQणिtयक _प से उ: पादन शु_ होने के उपरांत, आवेदक त: काल व 

आयुI त के समn 0नधा(oरत *प (*प-4) मJ आव#धक ऋण क-  वीकृ0त क- तारख से 1 वष( के भीतर *: यn स: यापन हेतु

अपने अनुरोध को * तुत करेगा जो?क एक जेआईट ,वारा आई-एटयूएफएस सॉ टवेयर का *योग करके ?कया जाएगा। यह

समय सीमा व  आयुI त के अनुमोदन के साथ मामला दर मामला आधार दो (2) वष( तक बढ़ाई जा सकती है। व  आयुI त

ऐेसे 9व तार को दए जाने के कारणO को 8लQखत मJ oरकाड( करेगा।

6.5.2

य द आवेदक आई-एटयूएफएस सॉ टवेयर का *योग करके 0नधा(oरत *प (*प-4) मJ जेआईट ,वारा 0नधा(oरत समय सीमा के

भीतर *: यn स: यापन हेतु मशीनर के सं थापन के बाद आवेदन * तुत करने मJ 9वफल रहता है तो आवेदक को जार क- गई

यूआईडी  वत: 0नर त हो जाएगी तथा इसके उपरांत इस योजना के अंतग(त सिbसडी हेतु इस पर 9वचार नहं ?कया जाएगा।

6.5.3

यह सु0निpचत करने के 8लए ?क ?कसी लाभाथ‹ इकाई ने 0नधा(oरत सीमा से अ#धक क- सिbसडी *ाi त नहं क- है, आवेदक को

लाभाथ‹ इकाई ,वारा आरआरटयूएफएस के अंतग(त *ाi त क- गई सिbसडी के b यौरO को दशा(ते हुए इकाई के लेटर हेड (*प-

5) पर एक घोषणा * तुत करनी आवp यक होगी। य द आवेदक ने पूव( मJ आरआरटयूएफएस के अंतग(त सिbसडी *ाi त कर ल

हो, तो वह केवल एक एकल इकाई हेतु 0नधा(oरत अ#धकतम सीमा के अंतग(त शेष रा8श के 8लए ह पा होगा।

Hkkx I—[k.M 1]

Hkkjr dk jkti=] ekpZ 12] 2016 ¼QkYxqu 22] 1937½

265

6.5.4

व  आयुI त, योजना के अंतग(त सं था9पत मशीनO के *ौ,यो#गक  तर के स: यापन तथा 0नधा(oरत *प (*प-6) मJ योजना के

दशा0नदAशO के अनु_प पाता एवं पा सिbसडी रा8श के स: यापन हेतु एक संयुI त 0नरnण दल (जेआईट) का गठन करेगा

िजसमJ व  आयुI त, संबं#धत ऋण*दाता एजJसी, एक व  अनुसंधान संघ तथा एक उ,योग संघ के अ#धकार/*0त0न#ध शा8मल

हOगे।

6.5.5

जेआईट इन मशीनर के सं थापन तथा वाQणिtयक उ: पादन क- शु_आत क- जेआईट हेतु अनुरोध *ाi त होने के अ#धकतम

अठासी (88) दनO के अंदर सं था9पत मशीनर के #चO और सहायक द तावेजO के साथ 0नधा(oरत *प (*प-6) मJ जांच तथा

स: यापन करेगी। इसके अलावा, जेआईट को आई-एटयूएफएस सॉ टवेयर के माE यम से *: यn स: यापन ?कए जाने के दो (2)

दनO के अंदर oरपोट( * तुत करनी होगी तथा इसे इसक- एक *0त व  आयुI त को भी *े9षत करनी होगी।

6.5.6

य द जेआईट, जेआईट हेतु अनुरोध *ाi त होने के स: तर (70) दनO के अंदर आई-एटयूएफएस सॉ टवेयर का *योग करके

अपनी जांच को पूरा नहं करता है तथा इसे 0नधा(oरत *प (*प-6) मJ अपलोड़ नहं करता है तो व  आयुI त के संबं#धत

nेीय/राt य काया(लय के काया(लय-*भार को *णाल ज0नत येलो एलट( *े9षत ?कया जाएगा। य द वह आवेदक से जेआईट

स: यापन हेतु अनुरोध *ाi त होने के पचासी (85) दनO के अंदर कार(वाई करने मJ 9वफल रहता है तो, *ाथ8मकता के आधार पर

त: काल कार(वाई हेतु उसके 0नयंण अ#धकार स हत संबं#धत काया(लय-*भार को *णाल ज0नत एक रेड एलट( *े9षत ?कया

जाएगा।

6.5.7

व  आयुI त का काया(लय जेआईट से व  आयुI त के अनुमोदन/नामंजूर हेतु जेआईट oरपोट( *ाi त होने के एक माह के अंदर

0नधा(oरत *प (*प-7) मJ सिbसडी दावे पर कार(वाई करेगा।

6.5.8

य द आई-एटयूएफएस सॉ टवेयर के माE यम से जेआईट oरपोट( क- *ािiत के तेइस (23) दनO के अंदर इस पर कार(वाई नहं

क- जाती है तो संबं#धत 0नदेशक/संयुI त व  आयुI त/अपर व  आयुI त को एक *णाल ज0नत येलो एलट( *े9षत ?कया

जाएगा। य द, वे जेआईट oरपोट( *ाi त होने के स: ताइस (27) दनO के अंदर कार(वाई करने मJ 9वफल रहते हS तो व  आयुI त

तथा अपर व  आयुI त को *ाथ8मकता के आधार पर त: काल कार(वाई सु0निpचत करने के 8लए एक *णाल ज0नत रेड एलट(

*े9षत ?कया जाएगा।

6.5.9

व  आयुI त का काया(लय व  आयुI त के अनुमोदन के उपरांत अनुमो दत दावO हेतु Mबल तैयार करेगा तथा आई-एटयूएफएस

के माE यम से व  मंालय (एमओट) को सिbसडी दावO हेतु चालान * तुत करेगा।

6.6

चरण-5: व  मंालय ,वारा आवेदक के चालू ऋण खाते मJ पा सिbसडी को जार ?कया जाना।

6.6.1

व  मंालय (एमओट) व  आयुI त से (*प-8) के अनुसार आई-टयूएफएस सॉ टेवेयर के माE यम से *ाi त हुए दावO पर

कार(वाई करेगा तथा 0न#ध क- उपलb धता क- शत( के अध् यधीन, पा सिbसडी को आई-एटयूएफएस सॉ टवेयर के माE यम से

दावा Mबल/चालान क- *ािiत क- 0त#थ से इI क-स (21) दनO के अंदर संबं#धत ऋण *दाता एजJसी ,वारा रखे जा रहे ऋण

*ाi तकता(/आवेदक के खाते मJ सीधे तौर पर जार करेगा। इकाई का खाता इकाई के पैन नंबर तथा आधार नंबर (जहां कहं भी

लागू हो) से संब] होना चा हए।

6.6.2

पूर रा8श केवल तभी जार क- जाएगी जब आवेदक ने एटयूएफएस के अंतग(त केवल एक ऋण *दाता एजJसी से ऋण *ाi त

?कया हो। तथा9प य द आवेदक ने आव#धक ऋण क- डाउन से8लंग अथवा कंसो ट(यम फाइनJ8संग क- सु9वधा *ाi त क- हो तो

सिbसडी रा8श को संबं#धत ऋण *ाi तकता( के खाते मJ यथा अनुपात आधार पर जमा कर दया जाएगा।

6.6.3

य द *ाi त दावा MबलO/चालानO पर आई-एटयूएफएस सॉ टवेयर के माE यम से व  आयुI त के काया(लय से इसक- *ािiत के

सह (17) दनO के अंदर कार(वाई न क- गई हो तो व  मंालय के संबं#धत उप-0नदेशक/0नदेशक को *णाल ज0नत येलो एलट(

जार ?कया जाएगा। य द इन पर व  आयुI त के काया(लय से दावा *ािiत के उ/ नीस (19) दनO के अंदर कार(वाई न क- गई

हो तो संयुI त स#चव (एटयूएफएस)/अपर स#चव (एटयूएफएस) को इन पर पैरा-6 मJ उिलQखत समय-सीमा तथा *ोसेस लो

चाट( (अनुबंध-घ) के अनुसार कार(वाई सु0निpचत करने के 8लए एक *णाल ज0नत रेड एलट( *े9षत ?कया जाएगा।

6.6.4

ऋण *ाi तकता(/आवेदक के खाते मJ डीबीट मोड मJ सिbसडी जार ?कए जाने को सिbसडी रा8श का एक उपयुI त *योग माना

जाएगा और इसके बाद ?कसी उपयो#गता *माणप क- आवp यकता नहं होगी।

7.

0नगरानी *णाल:-

इस योजना का *चालन एक ,9व तरय 0नगरानी *णाल के साथ ?कया जाएगा िजसमJ तकनीक- परामश(दाी – सह-0नगरानी

स8म0त (टएएमसी) तथा अंतर-मंालयी संचालन स8म0त (आईएमएससी) शा8मल हOगे।

266

Hkkjr dk jkti=] ekpZ 12] 2016 ¼QkYxqu 22] 1937½

[Hkkx I—[k.M 1

7.1

तकनीक- परामश(दाी – सह-0नगरानी स8म0त (टएएमसी): व  आयुI त क- अE यnता मJ एक तकनीक- परामश(दाी – सह-

0नगरानी स8म0त (टएएमसी) का गठन ?कया जाएगा िजसमJ 9व8भ/ न nेO को शा8मल करते हुए सरकार तथा उ,योग से

सद यO के _प मJ तकनीक- 9वशेष„ शा8मल हOगे। टएएमसी का गठन एवं काय( अनुबंध-ड. पर संल• न है।

7.1.1

मशीनर क- सूची मJ जोड़ने/हटाने के संबंध मJ संशोधन टएएमसी के ,वारा ?कया जाएगा।

7.1.2

य द योजना के अंतग(त ?कसी इकाई अथवा मशीनर क- पाता के संबंध मJ ऋण *दाता एजJसी/उ,य8मयO ,वारा f याD या अथवा

 पW टकरण से संबं#धत कोई *p न उठाया जाता है तो टएएमसी का 0नण(य अं0तम होगा।

7.1.3

टएएमसी nे-वार *ग0त स हत योजना क- *ग0त क- 0नगरानी एवं समीnा करेगी तथा मंालय और आईएमएससी को

ैमा8सक आधार पर अवगत कराएगी।

7.2 अंतर-मंालयी संचालन स8म0त (आईएमएससी):

7.2.1

व  मंी क- अE यnता मJ एक आईएमएससी का गठन ?कया जाएगा िजसमJ 9व: त मंालय (f यय 9वभाग तथा 9व: तीय सेवाएं

9वभाग), भार उ,योग 9वभाग, वाQणt य 9वभाग, औ,यो#गक नी0त एवं संवध(न 9वभाग, नी0त आयोग, चय0नत ऋण *दाता

एजJ8सयO, व  उ,योग के संघO आ द के *0त0न#ध शा8मल हOगे। आईएमएससी आ#थ(क मामलO पर मंीमंडलय स8म0त के

अनुमोदन के अनु_प योजना के *भार ?@या/ वयन हेतु दशा0नदAशO को तैयार करने तथा 0नगरानी हेतु उ: तरदायी होगी।

आईएमएससी का गठन तथा काय( अनुबंध-च पर संल• न है।

7.2.2

आईएमएससी योजना क- *ग0त क- अ](वा9ष(क आधार पर समीnा करेगी तथा इसका *भावी ?@या/ वयन सु0निpचत करेगी।

8. यूआईडी के 0नर तीकरण हेतु *ावधान:-

8.1

योजना के अंतग(त जार क- गई यूआईडी को उन मामलO मJ 0नर त कर दया जाएगा जहां:-

8.1.1

आवेदक, एक संयुI त 0नरnण दल (जेआईट) ,वारा *: यn स: यापन ?कए जाने के 8लए आव#धक ऋण क-  वीकृ0त क- 0त#थ

से दो (2) वष( के अंदर मशीनर के सं थापन के बारे मJ सू#चत करने से 9वफल रहता है। आवेदक को जार क- गई यूआईडी

 वत: 0नर त कर द जाएगी तथा इस पर इस योजना के अंतग(त सिbसडी लाभO के 8लए आगे 9वचार नहं ?कया जाएगा।

8.1.2

आवेदक ?कसी अ/ य कारण से योजना के अंतग(त लाभ नहं *ाi त करने का 0नण(य लेता है और इस संबंध मJ आई-एटयूएफएस

सॉ टवेयर का *योग करते हुए संबं#धत ऋण *दाता एजJसी के माE यम से जार क- गई यूआईडी के 0नर तीकरण हेतु अनुरोध

को अपलोड़ कर सकता है। यह अनुरोध 0नधा(oरत *प (*प-9) मJ ?कया जाना चा हए।

8.1.3

?कसी अ/ य  तर पर आवेदन के 0नर त हो जाने पर यूआईडी  वत: ह 0नर त हो जाएगी।

9.

दुZपयोग से बचाव के उपाय:

9.1

योजना के अंतग(त उपलb ध कराई जा रह सिbसडी के दुZपयोग को रोकने के 8लए 0नP न8लQखत उपाय ?कए गए हS:-

9.1.1

इस योजना के अंतग(त जार क- गई यूआईडी पर सृिजत क- गई पoरसंपि:तयO तथा उनके *ौ,यो#गक-य  तर पर *: यn

स: यापन एक संयुI त 0नरnण दल ,वारा ?कया जाएगा िजसमJ व  आयुI त, संबं#धत ऋण *दाता एजJ8सयO, व  अनुसंधान

संघ तथा उ,योग संघ के अ#धकार/*0त0न#ध शा8मल हOगे। जेआईट योजना के दशा0नदAशO के अनुसार पाता तथा पा सिbसडी

रा8श का *माणन करेगी।

9.1.2

यह अ0नवाय( ?कया गया है ?क सभी पा मशीनर के मॉडल, 9व0नमा(ण के वष(, 9व0नमा(ता का नाम तथा @म संD या को

मशीन/मशीनO पर  पW ट _प से दशा(या गया हो। इसके अलावा व  आयुक् त ,वारा ‘मशीन पहचान कोड’ (एमआईसी) भी

आवं टत ?कया जाएगा जो?क इस योजना के अंतग(त खरद गई *: येक मशीन हेतु एक 9व8शW ट पहचान संD या होगी। यह

एमआईसी मशीनर पर 8लखना अ0नवाय( होगा तथा अलग-अलग समय पर *: यn स: यापन के दौरान इसका स: यापन ?कया

जाएगा।

9.1.3

यह सु0निpचत करने के 8लए ?क कोई भी लाभाथ‹ इकाई 0नधा(oरत सीमा से अ#धक सिbसडी *ाi त नहं कर रह है, आवेदक को

आरआरटयूएफएस तथा एटयूएफएस के अंतग(त लाभाथ‹ इकाई ,वारा *ाi त क- जा रह सिbसडी के 9ववरण को दशा(ते हुए

इकाई के लेटर हेड पर कंपनी के *ा#धकृत f यिIत ,वारा ह ताnoरत एक घोषणा * तुत करनी होगी।

9.1.4

व  मंालय के अ#धकार सं था9पत/शु_ क- गई मशीनर समय-समय पर आकिमक आधार पर 0नरnण करJगे।

9.1.5

मंालय ,वारा योजना के अंतग(त लाभ *ाi त कर रह इकाइयO का 0नरnण करने के 8लए सSपल आधार पर थड( पाट’

इंजी0नयoरंग परामश(दाताओं को शा8मल ?कया जाएगा।

Hkkx I—[k.M 1]

Hkkjr dk jkti=] ekpZ 12] 2016 ¼QkYxqu 22] 1937½

267

9.1.6

यह अपेnा क- जाती है ?क इकाई कम से कम 3 वष( क- अव#ध तक काय( करेगी। 3 वष‰ तक इकाई के काय(चालन क-

0नगरानी के 8लए ऋण *दाता एजJसी/यO को एसएसआई इकाई के मामले मJ मॉरोटोoरयम अव#ध स हत / यूनतम पुनअ(दायगी

अव#ध को 3 वष( तथा अ/ य इकाइयO के मामले मJ 5 वष( 0नधा(oरत करना होगा।

10.

8शकायत 0नवारण *णाल:

10.1

इस योजना के ?@या/ वयन के संबंध मJ 0नधा(oरत *प (*प-10) मJ *ाi त हुई सभी 8शकायतO का 0नवारण व  आयुI त क-

अE यnता मJ ग ठत एक 8शकायत स8म0त ,वारा ?कया जाएगा िजसमJ व  मंालय, ऋण *दाता एजJ8सयO तथा उ,योग संघO

आ द के *0त0न#ध शा8मल हOगे।

10.2

एटयूएफएस नी0त संबंधी मामलO तथा एटयूएफएस क- f याD या आ द से संबं#धत 8शकायतO को 0नधा(oरत *प (*प-11) मJ

स#चव, व  मंालय, भारत सरकार को * तुत ?कया जाएगा जो इनका समाधान करJगे।

11.

दशा0नदAशO मJ संशोधन:

9व: तीय मामलO से जुड़े हए इन दशा0नदAशO मJ कोई भी संशोधन f यय 9व: त स8म0त (ईएफसी) के पूव( अनुमोदन के ,वारा ह

?कया जाएगा। 9व: तीय मामलO को छोड़कर अ/ य मामलO से संबं#धत संशोधन आईएमएससी के अनुमोदन ,वारा ?कए जा सकते हS।

आदेश

आदेश दया जाता है ?क इस संक प को सामा/ य सूचना हेतु भारत सरकार के राजप मJ *का8शत ?कया जाए।

यह भी आदेश दया जाता है ?क इस संक प क- *0तयां संबं#धत मंालयO/9वभागO/संगठनO को *े9षत क- जाएं।

पुW पा सुxहमy यम

अपर स#चव

अनुबंध-क

एका#धक 9व: तपोषण न होने का वचन-प

(इकाई के लेटर हैड पर )

दनांक :

हम —————————————————————————— (लाभाथ‹ इकाई का नाम) एतद,वारा यह *माQणत करते हS ?क कोई मशीनर अथवा उसका

कोई भाग, िजसके 8लए एटयूएफएस के अंतग(त लाभO के 8लए दावा ?कया गया है, हेतु इस बSक तथा/अथवा ?कसी अ/ य बSक

(बSकO)/ऋण*दाता एजJसी/एजJ8सयO/9व: तीय सं थानO से एक बार से अ#धक ऋण *ाi त नहं ?कया है।

सभी पoरयोजनाओं तथा *ाi त ?कए गए ऋणO जहां हमारे ,वारा टयूएफएस के अंतग(त लाभ *ाi त ?कए गए हS, का 9ववरण नीचे दया

गया है :

@.सं.

पoरयोजना का

नाम

पoरयोजना रा8श

(पoरयोजना लागत)

पoरयोजना हेतु *ाi त ?कए गए ऋण

(सं9वतoरत ऋण क- रा8श)

ऋण*दाता बSक/9व: तीय

सं थान/ऋण*दाता एजJसी

कुल

हम यह वचन देते हS ?क ऊपर उिलQखत त“ यO मJ ?कसी *कार क- गलती पाए जाने पर, ऋण*दाता एजJसी अथवा सरकार ,वारा हम पर

लगाए गए दy डा: मक b याज स हत संपूण( सिbसडी रा8श क- *: यn _प से सरकार को अथवा सरकार के 0नदेश के अनुसार ऋण*दाता

एजJसी के माE यम से *0तपू0त( क- जाएगी। सरकार अथवा ऋण*दाता एजJसी भी पाता को रu करने, b लैक 8ल ट करने आ द , जैसा भी

उ#चत हो, के 8लए *ा#धकृत हOगी।

*ा#धकृत ह ताnरकता( के ह ताnर

नाम तथा पदनाम

कृते (लाभाथ‹ इकाई का नाम)

(कृपया कंपनी/इकाई क- सील/रबर  टSप लगाएं)

* टयूएफएस (*ौ,यो#गक- उ/ नयन 0न#ध योजना) का ता: पय( तथा इसमJ टयूएफएस, एमटयूएफएस, आरटयूएफएस, आरआरटयूएफएस

एवं एटयूएफएस शा8मल हS।

टयूएफएस संदभ( संख् या_________________________

268

Hkkjr dk jkti=] ekpZ 12] 2016 ¼QkYxqu 22] 1937½

[Hkkx I—[k.M 1

अनुबंध-ख

एक बSक/ऋण *दाता एजJसी से दूसर ऋण *दाता एजJसी तक आव#धक ऋण को टेकओवर करने हेतु अनुरोध

नोट : दूसर ऋण *दाता एजJसी मJ पoरवत(न के समय इकाई को यह सु0निpचत करना होगा ?क नई ऋण*दाता एजJसी एटयूएफएस के

अंतग(त शा8मल है।

@.सं.

f याD या

9ववरण

संल• न सहायक द तावेज

1.

यूआईडी संD या एवं 0त#थ

2.

वत(मान बSक का नाम

3.

*ारं8भक बSक ,वारा  वीकृत कुल आव#धक ऋण (Zपए मJ)

4.

टयूएफएस के अंतग(त ऋण खाते मJ शेष रा8श िजसे अ/ य बSक ,वारा

टेक ओवर ?कया जा रहा है

5.

नए बSक का नाम

6.

9पछले बSक ,वारा ?कस 0तमाह तक दावO को दज( ?कया गया है

7.

I या टयूएफएस के अंतग(त अ/ य बSक ,वारा खाते को टेक ओवर करने

के 8लए 9पछले बSक ,वारा एनओसी जार ?कया गया है

8.

नए बSक ,वारा जार  वीकृ0त आदेश के 9ववरण के साथ नए बSक ,वारा

टेक ओवर ?कए गए आव#धक ऋण क- वा त9वक रा8श

9.

वह 0तमाह िजससे नया बSक दावे * तुत करेगा

10.

बSक मJ पoरवत(न का कारण

*माQणत ?कया जाता है ?क ऊपर * तुत क- गई सूचना सह है और इकाई के पास उपलb ध द तावेजO के आधार पर है िजनका स: यापन

*ा#धकृत अ#धकाoरयO ,वारा ?कसी भी समय ?कया जा सकता है।

 थान:

(ह ताnर)

दनांक

(*ा#धकृत ह ताnर का नाम एवं पदनाम)

नोट: कृपया *ा#धकृत ह ताnर के ह ताnर के साथ कंपनी/इकाई क- सील/रबर  टSप लगाएं।

अनुबंध – ग

एटयूएफएस के अंतग(त ऋण*दाता एजJसी को शा8मल करने हेतु *प

(आई-एटयूएफएस सॉ टवेयर के माE यम से व  आयुI त को * तुत ?कया जाना)

1.

बSक का नाम

2.

पता

3.

आईएफएससी कोड

4.

एमआईसीआर कोड

5.

संपक( f यिIत का नाम

6.

दूरभाष नं. (काया(लय)

7.

मोबाईल

8.

ई-मेल आईडी

9.

फैI स नं.

Hkkx I—[k.M 1]

Hkkjr dk jkti=] ekpZ 12] 2016 ¼QkYxqu 22] 1937½

269

10.

xांच का नाम

11.

xांच का आईएफएससी कोड

12.

xांच का एमआईसीआर कोड

13.

संपक( f यिIत

14.

दूरभाष नं. (काया(लय)

15.

मोबाईल

16.

ई-मेल आईडी

17.

फैI स नं.

दनांक:

ह ताnर

सील के साथ नाम एवं पदनाम

संल• नकO का 9ववरण:

1. बS?कंग 9व0नयमन अ#ध0नयम, 1949 के अंतग(त आरबीआई ,वारा जार बS?कंग लाईसJस क- *0त

2.

आरबीआई अ#ध0नयम, 1934 क- दूसर अनुसूची मJ शा8मल ?कए जाने हेतु आरबीआई ,वारा जार प क- *0त

3. म ट  टेट कोओपरे टव एI ट, य द लागू हो तो, के अंतग(त पंजीकरण हेतु भारत सरकार ,वारा जार *0त

4. पैन/टैन संD या क- *0त

5. 9पछले तीन वष‰ के लेखापरwnत तुलन-प क- *0त

6. अ/ य संबं#धत जानकार, य द कोई हो।

अनुबंध- घ

STEP -1

Application to Bank for Loan, submission of details through i-ATUFS and

generation of ATUF reference number by Textile Commissioner

Bank

UID GENERATION

STEP -2

Bank sanctions term loan to applicant and communicates to Applicant and

Textile Commissioner

Through i-ATUFS (for Pre-authorizing subsidy benefit under ATUFS)

Processed by Bank

Bank verifies submitted form-1

Fill Loan Disbursement Details, if any

Bank fills loan details in form-2 and submit to Textile Commissioner

Textile Commissioner scrutinizes as

per Form - 3

Textile Commissioner approves application

& Generates UID

TUFS Applicant

get UID

Communication to Applicant &

Bank through e-mail & SMS.

Applicant Adds details in form-1 (Part-II) and submit to Bank using i-ATUFS

Banks

Norms

6 Months

2 Months

TxC

1Month

270

Hkkjr dk jkt

1.

व  आयुI त, व  मंालय, मुंबई

2.

0नदेशक (एटयूएफएस), व  मंा

3.

पटसन आयुI त, व  मंालय, को

4.

औ,यो#गक सलाहकार, भार उ,यो

5.

अE यn, भारतीय व  उ,योग पoर

6.

अE यn, भारतीय ऊनी 8मल पoरसं

7.

अE यn, फेडेरेशन ऑफ इंmडया आट

8.

अE यn, भारतीय िपनस( संघ (आ

9.

अE यn, दwnण भारत िपनस( संघ

10.

अE यn, लु#धयान 0नट9वयर I लब

11.

अE यn, भारतीय व  मशीनर 9व

12.

अE यn, भारतीय पटसन 8मल संघ

ti=] ekpZ 12] 2016 ¼QkYxqu 22] 1937½

टएएमसी का गठन

ई

अ

ालय

स

कोलकाता

स

ोग 9वभाग, नई द ल

स

oरसंघ (आईडb  यूएमएफ), मुंबई

स

संघ (आईडb  यूएमएफ), मुंबई

ट( 8स क 9व9वंग इंड ƒ

स

आईएसए), मुंबई

स

घ (एसआईएसपीए), कोयP बटूर

स

, लु#धयाना

स

9व0नमा(ता संघ (टएमएमएआई), मुंबई

स

घ (आईजेएमए), कोलकाता

स

[Hkkx I—[k.M 1

अनुबंध-ड

अE यn

सद य

सद य

सद य

सद य

सद य

सद य

सद य

सद य

सद य

सद य

Hkkx I—[k.M 1]

Hkkjr dk jkti=] ekpZ 12] 2016 ¼QkYxqu 22] 1937½

271

13.

अE यn, I लो दंग मै/ युफैI चरस( एसो8सएशन ऑफ इंmडया (सीएमएआई), मुंबई

सद य

14.

अE यn, 9व,युतकरघा 9वकास एवं 0नया(त संवध(न पoरषद (पे mडिIसल), मुंबई

सद य

15.

अE यn, कॉटन टेI सटाइ स एI सपोट( *मोशन काउं8सल (टेI स*ो8सल), मुंबई

सद य

16.

अE यn, अपैरल 0नया(त संवध(न पoरषद (एईपीसी), गुडगांव

सद य

17.

अE यn, 8सं थे टक एवं रेयान टेI सटाइ स संवध(न पoरषद, मुंबई

सद य

18.

*भार, टयूएफएस *कोW ठ, आईडीबीआई बSक, मुंबई

सद य

19.

*भार, टयूएफएस *कोW ठ, भारतीय लघु उ,योग 9वकास बSक (8सडबी), लखनऊ

सद य

20.

अE यn, दwnण भारत 8मल संघ, कोयP बटूर

सद य

21.

अE यn, भारतीय तकनीक- व  संघ (आईटटए), मुंबई

सद य

22.

*भार, टयूएफएस *कोW ठ, भारतीय औ,यो#गक 9व: त 0नगम, नई द ल

सद य

23.

*भार, टयूएफएस *कोW ठ,  टेट बSक ऑफ इंmडया, मुंबई

सद य

24.

*भार, टयूएफएस *कोW ठ, सJƒल बSक ऑफ इंmडया, मुंबई

सद य

25.

*भार, टयूएफएस *कोW ठ, बSक ऑफ इंmडया, मुंबई

सद य

26.

*भार, टयूएफएस *कोW ठ, एनसीडीसी, नई द ल

सद य

27.

*भार, टयूएफएस *कोW ठ, बSक ऑफ बड़ौदा, मुंबई

सद य

28.

*भार, टयूएफएस *कोW ठ, इंmडयन ओवरसीज बSक, मुंबई

सद य

29.

*भार, टयूएफएस *कोW ठ, यू0नयन बSक ऑफ इंmडया, मुंबई

सद य

30.

*भार, टयूएफएस *कोW ठ, पंजाब नेशनल बSक, मुंबई

सद य

31.

0नदेशक, बाP बे टेI सटाइल oरसच( एसो8सएशन, मुंबई

सद य

32.

एटयूएफएस के *भार अपर/संयुI त व  आयुI त, व  आयुI त काया(लय, मुंबई

सद य स#चव

2.

टएएमसी nे-वार *ग0त के साथ-साथ योजना क- *ग0त क- समीnा तथा 0नगरानी करेगी और मंालय तथा आईएमएससी को

ैमा8सक आधार पर सू#चत करेगी।

3.

टएएमसी पा मशीनर को हर वष( 1 अ*ैल को अ,यतन तथा 9व0न द(W ट करेगी।

अनुबंध-च

आईएमएससी का गठन

1.

कJ hय व  मंी

अE यn

2.

स#चव, व  मंालय

उपाE यn

3.

स#चव, f यय 9वभाग

सद य

4.

स#चव, 9व: तीय सेवाएं 9वभाग

सद य

5.

स#चव, वाQणtय 9वभाग

सद य

6.

स#चव, औ,यो#गक नी0त एवं संवध(न 9वभाग

सद य

7.

स#चव, भार उ,योग 9वभाग

सद य

8.

स#चव, सू• म एवं लघु उ,यम मंालय

सद य

272

Hkkjr dk jkti=] ekpZ 12] 2016 ¼QkYxqu 22] 1937½

[Hkkx I—[k.M 1

9.

उप-गवन(र, भारतीय oरजव( बSक

सद य

10.

अपर स#चव और 9व: तीय सलाहकार, व  मंालय

सद य

11.

व  आयुI त, व  मंालय, मुंबई

सद य

12.

पटसन आयुI त, व  मंालय, कोलकाता

सद य

13.

9वकास आयुI त (हथकरघा), नई द ल

सद य

14.

सलाहकार, (व  *भार), नी0त आयोग, नई द ल

सद य

15.

सद य स#चव, कJ hय रेशम बोड(, बJगलुZ

सद य

16.

अE यn एवं *बंध 0नदेशक, आईडीबीआई

सद य

17.

अE यn एवं *बंध 0नदेशक, 8सडबी

सद य

18.

अE यn एवं *बंध 0नदेशक, आईएफसीआई

सद य

19.

अE यn,  टेट बSक ऑफ इंmडया

सद य

20.

अE यn, भारतीय व  मशीनर 9व0नमा(ता संघ (टएमएमएआई), मुंबई

सद य

21.

अE यn, भारतीय व  उ,योग पoरसंघ (सीआईटआई), नई द ल

सद य

22.

अE यn, फेडेरेशन ऑफ इंmडया आट( 8स क 9व9वंग इंड ƒ, सूरत

सद य

23.

अE यn, भारतीय ऊनी 8मल पoरसंघ (आईडb  यूएमएफ), मुंबई

सद य

24.

अE यn, 9व,युतकरघा 9वकास एवं 0नया(त संवध(न पoरषद (पे mडिIसल), मुंबई

सद य

25.

अE यn, भारतीय पटसन 8मल संघ (आईजेएमए), कोलकाता

सद य

26.

अE यn, I लो दंग मै/ युफैI चरस( एसो8सएशन ऑफ इंmडया, मुंबई

सद य

27.

अE यn, भारतीय तकनीक- व  संघ (आईटटए), मुंबई

सद य

28.

अE यn, दwnण भारत िपनस( संघ, कोयP बटूर

सद य

29.

अE यn, दwnण भारत 8मल संघ, कोयP बटूर

सद य

30.

अपर/संयुI त स#चव (एटयूएफएस *भार)

सद य स#चव

2. आईएमएससी सीसीईए अनुमोदन के अनुसार योजना के *भावी ?@या/ वयन हेतु दशा0नदAशO को तैयार करने और उनक- मॉनीटoरंग

के 8लए उ: तरदायी होगी। आईएमएससी योजना क- *ग0त क- अ]( वा9ष(क आधार पर समीnा करेगी तथा इसके *भावी ?@या/ वयन को

सु0निpचत करेगी।

3. 9व: तीय मामलO के अ0तoरI त अ/ य मामलO के संबंध मJ योजना मJ कोई भी संशोधन आईएमएससी के अनुमोदन ,वारा ?कया जा

सकता है।

*प -1

(लाभाथ‹ ,वारा जमा ?कया जाए)

पाट(-I

टi पणी:

1.

कृपया स ह 9वक प, जहां कहं लागू हो, पर ( √ ) करJ।

2.

रा8श केवल Zपए मJ 8लखी जाए। य द रा8श हजार/लाख अथवा करोड़ मJ 8लखी जाएगी, तो आवेदन संशोधन के 8लए वापस

?कया जाएगा और लाभाथ‹ *ा#धकृत पूव( सिbसडी मJ वoरW ठता @म क- हा0न हो सकती है।

3.

िजस लाभाथ‹ ने आरआरटयूएफएस के अंतग(त ?कसी आव#धक ऋण के 8लए ऑनलाइन *प1 भाग । पहले ह भर दया

है उसे दोबारा *प 1 का भाग । जमा कराने क- आवp यकता नहं है, य द सूचना मJ कोई पoरवत(न नहं है। हालां?क उसे

*प 1 के भाग II से भाग IV मJ अ0नवाय( _प से अ/ य सभी 9ववरण भरना होगा।

Hkkx I—[k.M 1]

Hkkjr dk jkti=] ekpZ 12] 2016 ¼QkYxqu 22] 1937½

273

क. i. आवेदक के बSक/सं था का नाम

ii. आवेदक के बSक/सं था का पता

iii. आईएफएससी कोड

iv. एसटडी कोड स हत दूरभाष

v. फैI स

vi. ई-मेल आईडी

ख. i. बSक के संपक( अ#धकार का नाम

ii. मोबाइल

iii. फैI स

iv. ई-मेल आईडी

ग. आव#धक ऋण के 8लए बSक हेतु आवेदन क- 0त#थ

क. कंपनी/फम( क- सूचना

कंपनी/फम( का नाम

1. *वत(कO/0नदेशकO/ मा8लकO/साझीदारO के नाम

नाम

पैन

डीआईएन

आधार काड(

2.

संपक( f यिIत का नाम

दूरभाष

मोबाइल

फैI स

ई-मेल आईडी

3.

कंपनी/फम( का संयं (O) का पता (ते) स हत 9पन

कोड

एसटडी कोड स हत दूरभाष

फैI स

ई-मेल आईडी

274

Hkkjr dk jkti=] ekpZ 12] 2016 ¼QkYxqu 22] 1937½

[Hkkx I—[k.M 1

ख. वत(मान पoरयोजना संबंधी सूचना

[कृपया 9व तृत पoरयोजना oरपोट( (डीपीआर) अपलोड करJ िजस पर बSक ने आव#धक ऋण *दान ?कया गया है]

1. वत(मान पoरयोजना का संwni त9ववरण

2. nे

बुनाई 9*पेरेटर/बुनाई/0न टंग/*सं करण/तकनीक- व /

पoरधान

3. पoरयोजना पूर करने क- बढ़ हुई 0त#थ

_____/_____/_____

( दन / माह / वष()

4.

पंजीकृत काया(लय पता स हत 9पन कोड

एसटडी कोड स हत दूरभाष

फैI स

ई-मेल आईडी

5. यू0नट का पैन.

6. I या यह कंपनी/फम(

एमएसई है

(एमएसएमईडी

अ#ध0नयम, 2006)

गैर-एमएसई है (एमएसएमईडी

अ#ध0नयम, 2006)

7. *बंधन अथा(त वा8म:व/साझेदार/*ाइवेट 8ल8मटेड

कंपनी/ पिbलक 8ल8मटेड कंपनी/सहकार/अ/ य?

8. क) I या यह 9व,यमान कंपनी/फम( अथवा एक नई

कंपनी/फम( है?

9व,यमान

नई

ख) कृपया शु_ करने क- 0त#थ बताएं

_____/_____/_____

( दन / माह / वष()

9. क. nे

i) 9व,यमान

ii) 9व तार पp चात

ख. अपने वत(मान काय(कलापO स हत कंपनी/फम( क- संwni त

पृW ठभू8म

ग. 9व0न8म(त ?कए जा रहे/?कए जाने वाले उ: पाद

घ. उ: पादO का अं0तम *योग एi लकेशन

Hkkx I—[k.M 1]

Hkkjr dk jkti=] ekpZ 12] 2016 ¼QkYxqu 22] 1937½

275

*प 1

भाग II

क. पoरयोजना के अंतग(त  था9पत ?कए जाने वाले मुD य संयं एवं मशीनर/उपकरण: (रा 8श _पए मJ)

@.

सं.

मशीनर/

उपकरण

का 9ववरण

मशीन का

9 अंक-य

कोड/

@मांक

मशी-

नर

मदO

का

क-

सं.

I यामशीनर क-

खरद आव#धक ऋण

क-  वीकृ0त से पूव(

अथवा पp चात क- गई

है

(जो भी कॉलम लागू है

सह का 0नशान

लगाएं)

कृपया संD या एवं

0त#थ स हत *प

बीजक/अं0तम बीजक

का 9ववरण 8लेखJ)

कुल

लागत

(मशीन

-वार)

*मशीन/

उपकरण

क- मूल

लागत

(मशीन-

वार))

8मंट के

संबंध मJ

जीआर के

अनुसार

अनुबंध सं.

एवं मद

संD या

8मंट के

संबंध मJ

जीआर मJ

9व0न द(W ट के

अनुसार

मशीन/

उपकरण क-

9व8शW टताएं/

9ववरण

कॉलम (11) मJ

9व0न द(W ट

अनुसार मशीन/

उपकरण क-

वा त9वक

9व8शW टताएं/

9ववरण के

साथ-सा थ 8मंट

संबंधी

9व8शW टताएं/

9ववरण

I या यह संपूण( मशीन के _प

मJ अ#ध*ाi त क- गई अथवा

यह 9व,यमान मशीन का

आं8शक उ/ नयन/आं8शक

*0त थापन है?

(जो भी कॉलम लागू है सह

का 0नशान लगाएं)

आया-

0तत

 व-

देशी

मशीनर

क-

खरद

आव#धक

ऋण

क-

 वीकृ0त

से पूव(

क- गई

मशीनर

क- खरद

आव#धक

ऋण क-

 वीकृ0त के

पp चात क-

गई

अनु-

बंध

सं.

मद

सं.

संपूण(

मशीन

9व,यमान मशीन का

आं8शक

उ/ नयन/आं8शक

*0त थापन

1

2

3

4

5

6

7

8

9

10

11

12

13

14

नोट:

*  वदेशी मशीनर उपकरण के संबंध मJ मूल क-मत (मशीन-वार) और आया0तत मशीनर/उपकरण के संबंध मJ सीआईएफ क-मत मशीन-

वार

क.

 वीकृत ?कया गया कुल आव#धक ऋण

Z.______________________

(कृपया बSकO से *ाi त हुए आव#धक ऋण(णO) के  वीकृ0त प(O) क-

एक *0त8ल9प अपलोड करJ)

ख.

*व(तको का अंशदान

Z._________ _____;पoरयोजना लागत का___%

ग. आव#धक ऋण खाता सं.

केवल अंक-य संD या

घ. I याआव#धक ऋण अ/ यबSक(कO)/सं था(ओं) ,वारा शेयर ?कया

जा रहा है?

हां

नहं

ङ. य द हां, शेयoरंग पैटन( दशा(एं

बSक/सं थाका नाम

रा8श(Zपए मJ)

कुल

पoरयोजना के ?@या/ वयन के आरंभ क- 0त#थ

_____/_____/_____

( दन / माह/ वष()

इकाई के आधु0नक-करण का  तर/*0तशतता

इसयोजना से पहले

इस योजना के पp चात

276

Hkkjr dk jkti=] ekpZ 12] 2016 ¼QkYxqu 22] 1937½

[Hkkx I—[k.M 1

*प–1 (जार)

भाग–III

1. यू0नट ,वारा आज क- 0त#थ (1999 के बाद से) तक 8लए गए ट स ऋण और सिbसडी लाभ पर सूचना और अब तक *ाi त सुधार:

अब तक *ाi त ट स ऋण और *ाi त सिbसडी का b यौरा

ट स पoरयोजना काया(/ वयन के पoरणाम व_प अिज(त लाभ

माह/वष(

पoरयोजना

लागत

 वीकृत

आव#धक

ऋण

बSक/एलए *nे

*ाi त सिbसडी

रा8श

*जोड़ी

गई/*0त था9पत

क- गई nमता

कारोबार मJ

वृ9] (%)

लाभ मJ

वृ9](%)

0नया(त

मJ

वृ9] (%)

गुणव: ता

मJ

सुधार **

*ाi त

क-

गई

आधु0नक-करण क-

सीमा (%)***

नोट: *1. nे एवं nमता 9ववरण *दान ?कए गए ›ॉप-डाउन-मेनू से चयन ?कया जाएगा।

**2. लाभाथ‹ इकाई ,वारा ?कए गए 0नधा(रण के अनुसार (अŠ छा/बहुत अŠ छा/उ: कृW ट आ द)

***3. *ाi त आधु0नक-करण क- सीमा लाभाथ‹ ,वारा  व-मू यांकन के अनुसार होगा।

2.

आरआरट स के अंतग(त यू0नट ,वारा 8लए गए ट स ऋण और सिbसडी लाभ पर सूचना:

@.सं.

खाता सं.

टयूएफ संदभ( सं.

और यूआईडी नं.

पूण( अव#ध के 8लए अ#धकृत

सिbसडी Zपए मJ

आवेदन के समय तक *ाi त

सिbसडी Zपए मJ

3.

लाभाथ‹ का वैयिIतक 9ववरण

(जहां कहं लागू हो कृपया सह का 0नशान लगाएं)

I. मा8लक के मामले मJ

8लंग

पुZष/ म हला

I या अनु.जा./अनु.ज.जा. से संबं#धत हS

हां

नहं

I या अ पसंD यक समुदाय से संबं#धत हS

हां

नहं

II. साझीदार फम( के मामले मJ

साझीदारO क- संD या

8लंग (संD या)

पुZष

म हला

अनु.जा./अनु.ज.जा. (संD या)

अजा/अजजा

अ/ य

अ पसंD यक समुदाय (संD या)

अ पसंD यक

अ/ य

III. 8ल8मटेड कंपनी के मामले मJ

एमडी स हत 0नदेशकO क- संD या

8लंग (संD या)

पुZष

म हला

अनु.जा./अनु.ज.जा. (संD या)

अजा/अजजा

अ/ य

अ पसंD यक समुदाय (संD या)

अ पसंD यक

अ/ य

सू• म एवं लघु उप@म (एमएसई) पर सूचना

नीचे मद सं. 1 से 4 केवल एमएसई इकाइयO ,वारा भर जाए (दूसरे शb दO मJ गैर-एमएसई इकाइयां नीचे मद सं. 1 से 4 छोड़

द जाए)

अजा/अजजा

Hkkx I—[k.M 1]

Hkkjr dk jkti=] ekpZ 12] 2016 ¼QkYxqu 22] 1937½

277

रोजगार पर सूचना (संD या मJ)

9व,यमान रोजगार

इस पoरयोजना के अंतग(त सृिजत ?कए

जाने वाले रोजगार

इस पoरयोजना के पूरा होने के पp चात कुल रोजगार

*बंधक-य

पय(वेnक-य

कामगार

*बंधक-य

पय(वेnक-य

कामगार

*बंधक-य

पय(वेnक-य

कामगार

nमता का 9ववरण

nे

वत(मान

था9पत

nमता

*ता9वत 9वतार

[नेट] / नई nमता

पoरयोजना के पूरा

होने पर था9पत

nमता

1.

œ9वि टंग/ट.एफ.ओ. (मशीनO क- संD या मJ)

2.

वा9प•ग (मशीनO क- संD या मJ)

3.

फाइबर डाइंग (?क.zा./माह मJ)

4.

यान( डाइंग (?क.zा./माह मJ)

5.

साइिजंग (मशीनO क- संD या मJ)

6.

शटल र हत करघे (करघO क- संD या मJ)

7.

(*ोजेI टाइल/रै9पयर/एयर-जेट/वाटर-जेट)

8.

0न टंग (मशीनO क- संD या मJ)

9.

वुवन फैMxक डाइंग (मीटर/माह मJ)

10. 0नटेड फैMxक डाइंग (?क.zा./माह मJ)

11. वुवन फैMxक 9*ं टंग (मीटर/माह मJ)

12. 0नटेड फैMxक 9*ं टंग (मीटर/माह मJ)

13. गारमJ टंग/मेड-अi स (नग क- संD या/माह मJ)

14. तकनीक- व  (कृपया अं0तम उ: पाद का उ लेख करJ)

क. वुवन ख. नॉन-वुवन ग. 0नटेड

15. कोई अ/ य

पoरयोजना लागत का b यौरा:

मद

Zपए मJ

कुल लागत

मूल क-मत [अथा(त कर संघटक जैसे

Mब@- कर/उ: पाद शुल् क/आयात शु क

आ द को छोड़कर]

भू8म

कारखाना भवन

*ारं8भक और संचालन पूव( खचA

काय(शील पूंजी के 8लए मनी मािज(न

मुD य संयं एवं मशीनर

अ/ य  थायी 0नवेश

कुल

278

Hkkjr dk jkti=] ekpZ 12] 2016 ¼QkYxqu 22] 1937½

[Hkkx I—[k.M 1

आव#धक ऋण क-  वीकृ0त क- 0त#थ से पूव( हुआ f यय

I याआव#धक ऋण क-  वीकृ0त से पूव( कोई f यय हुआ है

हां

नहं

जी हां, आव#धक ऋण क-  वीकृ0त क- 0त#थ से पूव( मशीनर/उपकरण पर हुए f यय का b यौरा

(Zपए)

दनांक

मशीनर/उपकरण

[*प मJ द गई सूचना

के अनु_प यहां 9ववरण

* तुत ?कया जाए]

कुल

लागत

(मशीन-वार)

मूल/सीआईएफ

क-मत

(मशीन-वार)

[अथा(त

कर

संघटक

जैसे

Mब@-

कर/उ: पाद

शु क/आयात

शु क

आ द

को छोड़कर]

f यय हई रा8श

(मशीन-वार)

I या

मशीन-वार

भुगतान

?कया गया

(कृपया ‘हां

अथवा

‘नहं’

मJ

उ लेख

करJ)

0न#ध

का

žोत

आया0तत

 वदेशी

1

2

3

4

5

6

7

8

कुल (I)

आव#धक ऋण क-  वीकृ0त क- 0त#थ से पूव( पoरयोजना पर हुआ कुल f यय: Zपए________ .

*प-1 (जार)

भाग–IV

स: या9पत ?कया जाता है ?क:

1.

*प 1 के भाग-I, भाग-II और भाग-III मJ द गई सूचना सह हS और यू0नट के पास उपलb ध द तावेज संबंधी सा• य के आधार

पर द गई है िजसे ?कसी भी समय अ#धकृत *ा#धकार ,वारा स: या9पत क- जा सकती है।

2.

मS/हम एतŸवारा यह स: या9पत करता (करते) हूं (हS) ?क यू0नट/फम( संबं#धत ˆेणी के 8लए 0नधा(oरत क- गई समz सीमा के अंदर

योजना के अंतग(त सिbसडी दावे के 8लए पा हS।

3.

मS/हम _____________ (लाभाथ‹ यू0नट का नाम) एतŸवारा यह स: या9पत करता (करते) हूं (हS) ?क कोई मशीनर अथवा

उसका कोई ह सा िजसके 8लए टयूएफएस के अंतग(त दावा ?कया जा रहा है/दावा ?कया गया है (टयूएफएस, एमटयूएफएस,

आरटयूएफएस और आरआरटयूएफएस स हत) इस बSक और अ/ य कोई बSकO/ऋण*दाता एजJ8सयO/9व: तीय सं थानO से एक से

अ#धक वार ऋण 0न#ध नहं द गई है। 9व#धवत _प से ह ताnoरत *माणप (9व0न द(W ट *प मJ) क- एक *0त अपलोड क- गई

है िजसे सिbसडी संबंधी दावे के समय मूल _प मJ जेआईट को * तुत ?कए जाएंगे।

4.

मS/हम एतŸवारा यह स: या9पत करता (करते) हूं (हS) ?क क#थत उuेp य के 8लए ल गई सिbसडी एट स पर सरकार संक प मJ

उिलQखत अनुसार मानक *ौ,यो#गक- क-  थापना के 8लए ह उपयोग क- जाएगी। य द कंपनी/यू0नट के द तावेजO और

पoरसंपि:तयO के स: यापन के दौरान अथवा बाद मJ ?कसी  तर पर कोई अंतर पाया जाता है, तो एट स के अंतग(त 8लया गया

लाभ बSक(कO)/सरकार को इसक- *ािiत क- 0त#थ से लागू दंडा: मक b याज स हत लौटा दया जाएगा।

5.

मS/हम उपयु(I त सूचना मJ चूक/गलत सूचनाओं, य द कोई, के 8लए  वयं िजP मेदार रहूंगा (रहJगे)। य द उपयु(I त द गई सूचना मJ

कोई अंतर होता है, मS/हम एतŸवारा इसक- सूचना बSक/सरकार को दJगे।

Hkkx I—[k.M 1]

Hkkjr dk jkti=] ekpZ 12] 2016 ¼QkYxqu 22] 1937½

279

6.

यह *माQणत ?कया जाता है ?क मुझे/हमJ------------------आरआरट स और एट स और एट स के अंतग(त आवेदन करने क-

0त#थ को Z.---------------- क- रा8श के 8लए पूव( अ#धकृत ?कया गया है तथा आरआरट स और एट स के अंतग(त सिbसडी के

_प मJ Z.------------------ *ाi त ?कए गए हS।

7.

मS/हम-----------------------यह वचन देते हS ?क यू0नट / यूनतम 3 वष( क- अव#ध के 8लए संचा8लत क- जाएगी और इस आव#धक

ऋण क- मोराटोoरयम अव#ध स हत / यूनतम पुनभु(गतान अव#ध 3 वष( है।

 थान:

(ह ताnर)

दनांक :

(अ#धकृत ह ताnरकता( का नाम एवं पद)

नोट :

कृपया अ#धकृत ह ताnरकता( के ह ताnर स हत कंपनी/यू0नट क- सील/रबड़ क- मोहर लगाएं

9व8शW ट 9ववरण स हत सभी मदे भरJ।

*प-2

ऋण *दाता एजJसी ,वारा *माण प

[जहां कहं लागू हो कृपया सह 9वक प पर (√) करJ]

(ऋण *दाता एजJसी क- शाखा ,वारा भरा जाना है)

1.

I या *प-1 मJ आवेदक ,वारा * तुत क- गई सूचना सह

है और द तावेजO से स: या9पत होती है

हां

नहं

2.

बSक/सं था ,वारा अव#ध ऋण आवेदन क- *ािiत क- 0त#थ

_____/_____/_____

( दन/माह/वष()

3.

*: यायोिजत *ा#धकार (बोड(/ऋण स8म0त आ द) ,वारा

अव#ध ऋण क-  वीकृ0त क- 0त#थ

_____/_____/_____

( दन/माह/वष()

4.

कंपनी/फम( को  वीकृ0त क- सूचना क- 0त#थ

_____/_____/_____

( दन/माह/वष()

5.

क. कुल  वीकृत अव#ध ऋण

Z. _______________

ख. *वत(कO का अंशदान

Z._________ ;पoरयोजना लागत का___%

6.

पoरयोजना पूरा होने क- अनुमा0नत 0त#थ

_____/_____/_____

( दन/माह/वष()

7.

?@या/ वयन अव#ध

______ वष( ______ माह

8.

*थम सं9वतरण क- 0त#थ

_____/_____/_____

( दन/माह/वष()

9.

क.

पुनभु(गतान शु_ होने क- 0त#थ

_____/_____/_____

( दन/माह/वष()

ख.

पुनभु(गतान ख: म होने क- 0त#थ

_____/_____/_____

( दन/माह/वष()

ग.

पुनभु(गतान अव#ध

[अथा(त मद सं. 9ख – मद सं. 9क]

________ वष( _______ माह

280

Hkkjr dk jkti=] ekpZ 12] 2016 ¼QkYxqu 22] 1937½

[Hkkx I—[k.M 1

10

अव#ध ऋण खाता संD या

11

क. I या अव#ध ऋण अ/ य बSकO/सं थाओं ,वारा शेयर

?कया जा रहा है?

हां

नहं

ख. य द हां, शेयoरंग पैटन( दशा(एं

बSक/सं था का नाम

रा8श (Z.)

कुल

ग. कंसो ट(यम 9व: त पोषण के मामले मJ अzणी बSक का

नाम?

सत् या9पत ?कया जाता है ?क:

*प 1 के भाग-I, भाग-II और भाग-III मJ आवेदक ,वारा द गई सूचना हमारे बSक के पास उपलb ध oरकॉड( के आधार पर सह पाई गई है।

यह भी स: या9पत ?कया जाता है ?क इस आव#धक ऋण क- मोराटोoरयम अव#ध स हत / यूनतम पुनभु(गतान अव#ध 3 वष( है।

 थान:

(ह ताnर)

दनांक :

(अ#धकृत ह ताnरकता( का नाम एवं पद)

*प-3

व  आयुI त का काया(लय ,वारा यूआईडी जार करने के 8लए जांच सूची के 8लए *प (@.सं. 1 से 20 *णाल ज0नत है)

1.

i) आवेदन क- िथ0त

ii) ु ट क- 0त#थ और समय

iii) व  आयुI त के काया(लय ,वारा ु ट का कारण

(*णाल ज0नत)

2.

i) पुन: आवेदन क- 0त#थ (0त#थ और समय) (ऋण *दाता एजJसी

,वारा यूआईडी आवेदन देते समय  वत: ज0नत)

ii) नोडल एजJसी ,वारा अनुपालन – टi i णी

(*णाल ज0नत)

3.

अनुमोदन क- 0त#थ (0त#थ और समय) (ऋण *दाता एजJसी

,वारा यूआईडी आवेदन देते समय  वत: ज0नत)

(*णाल ज0नत)

4.

अनुमोदन/*0तnा सूची संD या

(*णाल ज0नत)

5.

यू0नट का नाम और पता

(*णाल ज0नत)

6.

यू0नट का ई-मेल आईडी

(*णाल ज0नत)

7.

पैन नP बर

(*णाल ज0नत)

8.

अव#ध ऋण क-  वीकृ0त क- 0त#थ

(*णाल ज0नत)

9.

पoरयोजना लागत Zपए मJ

(*णाल ज0नत)

10.

दावा ?कया गया nे

(*णाल ज0नत)

12.

पoरयोजना पूरा होने क- अनुमा0नत 0त#थ

(*णाल ज0नत)

13.

बSक का नाम और पता, शाखा कोड

(*णाल ज0नत)

14.

 वीकृत अव#ध ऋण Zपए मJ

(*णाल ज0नत)

Hkkx I—[k.M 1]

Hkkjr dk jkti=] ekpZ 12] 2016 ¼QkYxqu 22] 1937½

281

15

*वत(क का अंशदान Zपए मJ

(*णाल ज0नत)

16.

अव#ध ऋण खाता संD या

(*णाल ज0नत)

17.

पा मशीनO क- मूल लागत Zपए मJ

(*णाल ज0नत)

18.

पा मशीनO पर पा सिbसडी मू य Zपए मJ

(*णाल ज0नत)

19.

आरआरट स के अंतग(त अ#धकृत-पूव( एवं ल गई टयूएफएस

सिbसडी

(*णाल ज0नत)

20.

एट स के अंतग(त अ#धकृत-पूव( कुल सिbसडी Zपए मJ

(*णाल ज0नत)

21.

I या एक ह पैन वाला एक जैसा आवेदन और ऑनलाइन *णाल

मJ  वीकृत ?कया गया एक जैसा अव#ध ऋण है ( वत:)

हां नहं

22.

I या आवेदन अव#ध ऋण क-  वीकृ0त क- 0त#थ से छह महने

के भीतर जमा करा दया गया है

हां नहं

23.

I या चय0नत ?कया गया nे सह है

हां नहं

24.

I या सिbसडी का अपेwnत *कार सह है

हां नहं

25.

I या 0न द(W ट क- गई सिbसडी सह है

हां नहं

26.

I या nे एवं मशीन डीपीआर से 8मलान कर रह है (काय(कार

सार, पoरयोजना क- लागत एवं 9व: त पोषण का साधन)

हां नहं

27.

I या पैन क- *0त8ल9प संल• न है और आवेदन मJ पैन के 9ववरण

से 8मलान कर रह है

हां नहं

28.

I या आवेदक ,वारा ‘कोई बहु 9व: त *माणप नहं’ संल• न ?कया

गया है

हां नहं

29.

आवेदन क- जांच क- गई

नाम एवं पदनाम

0त#थ एवं समय

30.

आवेदन स: या9पत ?कया गया

नाम एवं पदनाम

0त#थ एवं समय

*प–4

एटयूएफएस के अंतग(त आवेदक ,वारा सं था9पत मशीनO के 8लए संयुI त 0नरnण के 8लए अनुरोध * तुत करने हेतु *प

1.

ट स संदभ( संD या

(*णाल से  वत: ज0नत)

2.

यूआईडी संD या एवं 0त#थ

(*णाल से  वत: ज0नत)

3

यू0नट क- कंपनी का पंजीकरण 9ववरण अथवा उपयु(I त *ा#धकार

के साथ पंजीकरण 9ववरण

कृपया एक *0त अपलोड करे

4

नए Mबजल Mबल क- *0त8ल9प

कृपया एक *0त अपलोड करे

5

साझीदार फम( के मामले मJ साझीदार डीड

कृपया एक *0त अपलोड करे

282

Hkkjr dk jkti=] ekpZ 12] 2016 ¼QkYxqu 22] 1937½

[Hkkx I—[k.M 1

6

मा8लक/साझीदार/सहकार फम( के 8लए लज डीड / संपि:त

द तावेज

कृपया एक *0त अपलोड करे

7

अव#ध ऋण का 0त#थ-वार वास् त9वक सं9वतरण

(कृपया बSक का *माQणत 9ववरण भी अपलोड ?कया जाए)

8

मािज(न मनी और अव#ध ऋण के 8लए बSक का 9ववरण

कृपया एक *0त अपलोड करे

9

मशीन (नO) के वाQणिtयक बीजक (कO) क- *0त8ल9प (यां) (यू0नट

को ए-ट स मJ बीजक संD या एवं 0त#थ का उ लेख करना है और

इसे अपलोड भी करना है)

यूआईडी

*ाi त

करते

समय

अनुमा0नत

मशीन का

नाम

संD या

अनुमा0नत

मूल

लागत

Zपए मJ

खरद

गई एवं

 था9पत

क-

गई

वा त9वक

मशीन

वा त9वक

सं.

वाQणिtयक

बीजक के

अनुसार

वा त9वक

मूल लागत

Zपए मJ

9व0नमा(ता

का नाम

9व0न-

मा(ण

का

वष(

वाQण-

िtयक

बीजक

सं.

आयात

प

उ,गम

देश

i.

ii

iii

iv

v

10

मशीनर बदलने का औ#च: य (य द वा त9वक मशीन अनुमा0नत

मशीन से अलग है)

11

आयात प संD या एवं 0त#थ (आया0तत मशीन(नO) के मामले मJ)

कृपया एक *0त(यां) भी अपलोड करे

12

टआर-6 चालान (भुगतान क- गई सीमा शु क के 8लए)

(आया0तत मशीन(नO) के मामले मJ)

कृपया एक *0त(यां) भी अपलोड करे

13

बSक ,वारा 9व#धवत _प से *माQणत उ,गम देश (आया0तत

मशीन(नO) के मामले मJ)

कृपया एक *0त(यां) भी अपलोड करे

14

लदान Mबल संD या एवं 0त#थ (आया0तत मशीन(नO) के मामले मJ)

कृपया एक *0त(यां) भी अपलोड करे

15

बSक ,वारा *माQणत एलसी (आया0तत मशीन(नO) के मामले मJ)

कृपया एक *0त(यां) भी अपलोड करे

16

बSक ,वारा *माQणत डेMबट सूचना (आया0तत मशीन(नO) के मामले मJ)

कृपया एक *0त(यां) भी अपलोड करे

17

बSक ,वारा *माQणत िव ट/टेलzा?फक ƒांसफर रसीद (आया0तत

मशीन(नO) के मामले मJ)

कृपया एक *0त(यां) भी अपलोड करे

18.

*ाi त ?कए गए यूआईडी के अंतग(त शा8मल सभी मशीनO क-

 थापना पूरा करने क- 0त#थ:

19.

ट स आवेदक ,वारा अनुरोध * तुत करने क- 0त#थ

(*णाल से  वत: ज0नत)

20.

वा त9वक रोजगार सृिजत

कुल:

i. पुZष:

ii. म हला

i ii

iii. अजा, अजजा

iv अ पसंD यक

iii iv

Hkkx I—[k.M 1]

Hkkjr dk jkti=] ekpZ 12] 2016 ¼QkYxqu 22] 1937½

283

नोट: बSक संचालन से संबं#धत सभी द तावेज संबं#धत बSक ,वारा पृW ठांकन ?कया जाना चा हए जहां से अव#ध ऋण क- सु9वधा ल गई है।

*माQणत ?कया जाता है ?क:

इस *प मJ * तुत क- गई सूचना सह है और यू0नट के पास उपलbध द तावेजी सा• यO के आधार पर * तुत क- गई है िजसे

?कसी भी समय अ#धकृ त अ#धकाoरयO ,वारा स: या9पत ?कया जा सकता है।

 थान:

(ह ताnर)

दनांक :

(अ#धकृत ह ताnरकता( का नाम एवं पदनाम)

नोट : कृपया अ#धकृत ह ताnरकता( के ह ताnर के साथ कंपनी/यू0नट क- सील/रबड़ क- मोहर लगाई जाए।

9व8शW ट 9ववरण स हत सभी मदJ भर जाएं।

*प–5

जेआईट के समय यू0नट ,वारा क- जाने वाल घोषणा

(यू0नट के पशीष( पर)

8.

यह *माQणत ?कया जाता है ?क मुझे/हमJ------------------आरआरट स और एट स तथा एट स के अंतग(त आवेदन करने क-

0त#थ को Z.---------------- क- रा8श के 8लए पूव( अ#धकृत ?कया गया है तथा आरआरट स और एट स के अंतग(त सिbसडी के

_प मJ Z.------------------ *ाi त ?कए गए हS।

9.

मS/हम _____________ (लाभाथ‹ यू0नट का नाम) एतŸवारा यह स: या9पत करता (करते) हूं (हS) ?क कोई मशीनर अथवा

उसका कोई ह सा िजसके 8लए टयूएफएस के अंतग(त दावा ?कया जा रहा है/दावा ?कया गया है, इस बSक और अ/ य कोई

बSकO/ऋण*दाता एजJ8सयO/9व: तीय सं थानO से एक से अ#धक वार ऋण 0न#ध नहं द गई है। 9व#धवत _प से ह ताnoरत

*माणप (पoर8शW ट-।। के अनुसार 9व0न द(W ट *प मJ) क- एक *0त अपलोड क- गई है िजसे सिbसडी संबंधी दावे के समय मूल

_प मJ जेआईट को * तुत ?कए जाएंगे।

10.

मS/हम एतŸवारा यह स: या9पत करता (करते) हूं (हS) ?क क#थत उuेp य के 8लए ल गई सिbसडी एट स पर सरकार संक प मJ

उिलQखत अनुसार मानक *ौ,यो#गक- क-  थापना के 8लए ह उपयोग क- जाएगी। य द कंपनी/यू0नट के द तावेजO और

पoरसंपि:तयO के स: यापन के दौरान अथवा बाद मJ ?कसी  तर पर कोई अंतर पाया जाता है, तो एट स के अंतग(त 8लया गया

लाभ बSक(कO)/सरकार को इसक- *ािiत क- 0त#थ से लागू दंडा: मक b याज स हत लौटा दया जाएगा।

11.

मS/हम-----------------------यह वचन देते हS ?क यू0नट / यूनतम 3 वष( क- अव#ध के 8लए संचा8लत क- जाएगी और इस आव#धक

ऋण क- मोराटोoरयम अव#ध स हत / यूनतम पुनभु(गतान अव#ध 3 वष( है।

(ह ताnर)

(अ#धकृत ह ताnरकता( का नाम एवं पद)

*प – 6

संयुI त 0नरnण दल (जेआईट) ,वारा एटयूएफएस के अंतग(त मशीनर क-  थापना और शु_आत पर *माणप

1.

व  आयुI त का काया(लय मJ यू0नट के आवेदन क- *ािiत क- 0त#थ :

2.

व  आयुI त का काया(लय ,वारा आबं टत क- गई यूआईडी संD या एवं 0त#थ :

3.

0नरnण क- 0त#थ :

4.

0नरnण क- गई यू0नट का नाम और 9पन

कोड स हत पता

तालुका/तहसील/मंडल:

िजला:

राt य:

9पनकोड:

दूरभाष/मोबाइल

फैI स

ई-मेल आईडी

यू0नट का पैन नं.

एसएसआई पंजीकरण/ईएम क- सं. और 0त#थ

संपक( f यिIत का नाम

संपक( नं.:

284

Hkkjr dk jkti=] ekpZ 12] 2016 ¼QkYxqu 22] 1937½

[Hkkx I—[k.M 1

5.

I या यू0नट यूआईडी आवेदन मJ उिलQखत पते

पर काय(शील पाई गई।

हां

नहं

य द नहं, तो यू0नट का वा त9वक पता

तालुका/तहसील/मंडल:

िजला:

राt य:

9पनकोड:

6.

क) I या यू0नट ,वारा *प 1 मJ * तुत और

बSक ,वारा *माQणत ?कया गया b यौरा सह

पाया गया है अथवा नहं।

हां

नहं

ख) य द नहं कृपया उ लेख करJ

ग) I या *प 5 मJ घोषणा यू0नट से *ाi त क-

गई है और संल• न क- गई है।

हां

नहं

7.

nे

8

क. I या *प 4 मJ 0न द(W ट क- गई सभी

मशीनJ  था9पत क- हुई पायी गयी और एट स

के अंतग(त पा हS।

हां

नहं

ख. य द नहं कृपया उ लेख करJ

9

क. I या *प 4 मJ 0न द(W ट क- गई सभी

मशीनO पर व  आयुI त का काया(लय ,वारा

आबं टत ?कया गया एमआईसी कोड पाया

गया है।

हां

नहं

ख. य द नहं कृपया उ लेख करJ

10.

एट स के अंतग(त 0नधा(oरत क- गई पा

मशीनर क- कुल लागत

*वत(कO का अंशदान

सं9वतoरत ?कया गया लोन

Z.__________

Z.__________(_____%)

Z.__________(_____%)

एट स के अंतग(त सं था9पत/शु_ क- गई मशीनJ

(पoर8शW ट मJ दए गए अनुसार मशीन का

9ववरण * तुत ?कया जाए)

15%/ 10%

I या जेआईट ने सिbसडी जार करने क-

8सफाoरश क- है

हां/ नहं

य द हां, तो पा 0नवेश

Z.___________

य द नहं, उसका कारण

11.

पा सिbसडी रा8श (सीआईएस)

Z. ___________

12.

रोजगार

मा8लक / यू0नट के अ#धकृत f यिIत का ह ताnर स हत सील

(जेआईट सद यO के नाम एवं पदनाम तथा ह ताnर)

Hkkx I—[k.M 1]

Hkkjr dk jkti=] ekpZ 12] 2016 ¼QkYxqu 22] 1937½

285

*प–6 के 8लए पoर8शW ट

एटयूएफएस के अंतग(त मशीनर क-  थापना एवं शु_आत पर *माणप

मशीन-वार 9ववरण एवं b यौरा

मशीन का *कार

एट स अनुबंध के अनुसार मशीन संदभ( @मांक

संD या

आया0तत अथवा  वदेशी

मशीनO क- संD या

मशीन 9व0नमा(ता का नाम एवं पता

मशीन शु_ करने क- 0त#थ

0न8म(त

मॉडल

9व0नमा(ण का वष(

मशीन @मांक संD या

मशीन क- 9व8शW टताएं

उ,गम देश

(आया0तत के मामले मJ )

0नया(तक देश

(आया0तत के मामले मJ )

वाQणिtयक बीजक संD या एवं 0त#थ तथा मशीन

क- क-मत

(*0तयां संल• न क- गई)

लदान Mबल संD या एवं 0त#थ

(*0तयां संल• न क- गई)

आयात प संD या एवं 0त#थ

(*0तयां संल• न क- गई)

ई-कॉमस( पोट(ल (आईसगेट) मJ आयात प का

ऑनलाइन स: यापन

?कए गए भुगतान का 9ववरण

(*0तयां संल• न क- गई)

भुगतान का माE यम

(एलसी/िव ट /टट/सीएडी/आरटजीएस/एनईएफट

चेक/मांगप/पो टल ऑड(र आ द)

भुगतान क- रा8श एवं 0त#थ

286

Hkkjr dk jkti=] ekpZ 12] 2016 ¼QkYxqu 22] 1937½

[Hkkx I—[k.M 1

जेआईट ,वारा 9व#धवत _प से ह ताnoरत एवं

मुहर क- फोटो *0त संल• न और आवेदक

पoरयोजना के अंतग(त ?कए गए दावे क-  था9पत

मशीन दशा(एं

I या मशीनJ वाQणt यक बीजक मJ उिलQखत

9व8शW टताओं के अनुसार  था9पत/शु_ क- गई हS।

हां

नहं

जेआईट क- टi पणी, य द कोई हो

(जेआईट सद यO के नाम एवं पदनाम तथा ह ताnर)

(कंपनी/फम( के ह ताnर)

*प–7

दावे संबंधी *?@या के 8लए *प

व  आयुI त का काया(लय मJ यू0नट के आवेदन क- *ािiत क- 0त#थ :

व  आयुI त का काया(लय ,वारा आबं टत क- गई यूआईडी संD या एवं 0त#थ :

0नरnण क- 0त#थ:

1

0नरnण क- गई यू0नट का नाम और 9पन

कोड स हत पता

तालुका/तहसील/मंडल:

िजला:

राt य:

9पनकोड:

दूरभाष/मोबाइल

फैI स

ई-मेल आईडी

यू0नट का पैन नं.

एसएसआई पंजीकरण/ईएम क- सं. और 0त#थ

संपक( व् यिIत का नाम

संपक( नं.:

2

जेआईट ,वारा *: यn स: यापन क- 0त#थ

_____/_____/_____

( दन / माह/ वष()

3

ऑनलाइन *णाल मJ जेआईट oरपोट( को

अपलोड करने क- 0त#थ

_____/_____/_____

( दन / माह/ वष()

4

क) I या यू0नट ,वारा * तुत क- गई और बSक

,वारा *माQणत ?कया गया अ/ य सभी 9ववरण

जेआईट ,वारा सह पाया गया है अथवा नहं।

हां

नहं

Hkkx I—[k.M 1]

Hkkjr dk jkti=] ekpZ 12] 2016 ¼QkYxqu 22] 1937½

287

ख) य द नहं कृपया उ लेख करJ

ग) I या इस अंतर का समाधान ?कया गया

/जायज ठहराया गया।

हां

नहं

5

क. I या *प 4 मJ 0न द(W ट क- गई सभी

मशीनJ  था9पत क- हुई पायी गयी और

जेआईट ,वारा एट स के अंतग(त पा घो9षत

क- गई है।

हां

नहं

ख. य द नहं कृपया उ लेख करJ

6

क. I या *प 4 मJ 0न द(W ट क- गई सभी

मशीनO पर व  आयुI त का काया(लय ,वारा

आबं टत ?कया गया एमआईसी कोड जेआईट

,वारा पाया गया है।

हां

नहं

ख. य द नहं कृपया उ लेख करJ

7

जेआईट के अनुसार एट स के अंतग(त पा

पाई गई मशीन क- कुल लागत

सिbसडी क- रा8श 15% अथवा 10% क- दर

से जार क- जानी है

Z.

Z.

8

तकनीक- अ#धकार

सहायक 0नदेशक

उप 0नेदेशक

0नदेशक

संयुI त व  आयुI त / अपर व  आयुI त

व  आयुI त

*प– 8

दावा जार करने के 8लए *प

व  आयुI त (सnम *ा#धकार) के अनुमोदन क- 0त#थ

व  मंालय को चालान * तुत करने क- 0त#थ

संयुI त स#चव/अपर स#चव (टयूएफएस)- व  मंालय के अनुमोदन क- 0त#थ

आंतoरक 9व: त 9वंग – व  मंालय के अनुमोदन क- 0त#थ

सnम *ा#धकार के अनुमोदन क- 0त#थ

भुगतान एवं लेखा अ#धकार (व ) को Mबल भेजने क- 0त#थ

लाभाथ‹ के खाते/बSक मJ जमा होने क- 0त#थ

288

Hkkjr dk jkti=] ekpZ 12] 2016 ¼QkYxqu 22] 1937½

[Hkkx I—[k.M 1

*प-9

भाग । (लाभzाह ,वारा * तुत ?कया जाए)

संबं#धत ऋणदाता एजJसी के माE यम से एटयूएफएस के अंतग(त जार यूआईडी रu करना

नोट : दूसर ऋण *दाता एजJसी मJ पoरवत(न के समय इकाई को यह सु0निpचत करना होगा ?क नई ऋण*दाता एजJसी एटयूएफएस के

अंतग(त शा8मल है।

1.

यूआईडी संD या

 वत: तैयार क- गई

2.

यूआईडी अनुमोदन क- तारख

 वत: तैयार क- गई

3.

इकाई का नाम

 वत: तैयार क- गई

4.

इकाई का पता

 वत: तैयार क- गई

5.

इकाई क- ई-मेल आईडी

 वत: तैयार क- गई

6.

पैन संD या

 वत: तैयार क- गई

7.

आव#धक ऋण  वीकृ0त क- तारख

 वत: तैयार क- गई

8.

पoरयोजना लागत Zपए मJ

 वत: तैयार क- गई

9.

दावा ?कया गया nे

 वत: तैयार क- गई

10.

ऋणदाता एजJसी का नाम

 वत: तैयार क- गई

11.

ऋणदाता एजJसी का पता

 वत: तैयार क- गई

12.

ऋणदाता एजJसी का शाखा कोड

 वत: तैयार क- गई

13.

 वीकृत आव#धक ऋण Zपए मJ

 वत: तैयार क- गई

14.

*मोटर का अंशदान Zपए मJ

 वत: तैयार क- गई

15.

आव#धक ऋण का खाता संD या

 वत: तैयार क- गई

16.

यूआईडी के अनुसार पूव( *ा#धकृत कुल सिbसडी मू य Zपए मJ

 वत: तैयार क- गई

17.

जार क- गई यूआईडी रu ?कए जाने का कारण

*माQणत ?कया जाता है ?क:

इस *प मJ द गई सूचना सह हS एवं स: य हS और मS/हम ___________________ व  आयुI त का काया(लय ,वारा जार क- गई

उI त् यूआईडी को 0नर त करने का अनुरोध करते हS। इसके अलावा मS/हम व  आयुI त का काया(लय ,वारा जार क- गई उपरोI त

यूआईडी के संबंध मJ कभी ?कसी सिbसडी का पूण( अथवा आं8शक दावा नहं करJगJ।

 थान:

(ह ताnर)

दनांक

(*ा#धकृत ह ताnर का नाम एवं पदनाम)

नोट : कृपया *ा#धकृत ह ताnर के ह ताnर के साथ कंपनी/इकाई क- सील/रबर  टSप लगाएं।

*प-9 (जार)

भाग ।। (ऋणदाता ,वारा जार क- जाए)

संबं#धत ऋणदाता एजJसी ,वारा एटयूएफएस के अंतग(त जार यूआईडी रu करना

*माQणत ?कया जाता है ?क :

आवेदक ,वारा *प-8 के भाग-। मJ द गई सूचना हमारे बSक के पास उपलb ध oरकाड( के आधार पर सह पाई गई है।

*प-8 के भाग-। मJ आवेदक इकाई ,वारा * तुत ?कए गए कारणO से, मS/हम __________________ एत,वारा आवेदक इकाई को

व  आयुI त का काया(लय ,वारा जार यूआईडी संD या रu करने क- 8सफाoरश करते हS।

Hkkx I—[k.M 1]

Hkkjr dk jkti=] ekpZ 12] 2016 ¼QkYxqu 22] 1937½

289

*प-10

एट स के ?@या/ वयन से संबं#धत ऑनलाइन 8शकायत के 8लए *प

i.

8शकायत संD या ( वत: ज0नत)

ii.

8शकायत 0त#थ ( वत: ज0नत)

iii.

आवेदक यू0नट का नाम

iv.

आवेदक यू0नट का पता

v.

दूरभाष

vi.

फैI स

vii.

ई-मेल आईडी

viii.

संपक( अ#धकार का नाम

ix.

संपक( अ#धकार का पदनाम

x.

मोबाइल

xi.

फैI स

xii.

ई-मेल आईडी

xiii.

ऋणदाता एजJसी का नाम

xiv.

ऋणदाता एजJसी का पता

xv.

यूआईडी नं.

xvi.

यूआईडी जार करने क- 0त#थ

xvii.

अव#ध ऋण क- रा8श

xviii.

nे

xix.

एट स के ?@या/ वयन से संबं#धत 8शकायत का 9ववरण

xx.

अ0तoरI त 9ववरण, य द कोई

xxi.

सहायक द तावेजO क- *0तयां

कृपया  कैन क- गई *0त अपलोड करJ

 थान:

0त#थ:

(अ#धकृत ह ताnरकता( का नाम और पदनाम)

*प-11

एट स के अंतग(त नी0त संबंधी मामलO और उनका  पW टकरण से संबं#धत ऑनलाइन 8शकायत के 8लए *प

i.

8शकायत संD या ( वत: ज0नत)

ii.

8शकायत 0त#थ ( वत: ज0नत)

iii.

आवेदक यू0नट का नाम

iv.

आवेदक यू0नट का पता

v.

दूरभाष

vi.

फैI स

vii.

ई-मेल आईडी

290

Hkkjr dk jkti=] ekpZ 12] 2016 ¼QkYxqu 22] 1937½

[Hkkx I—[k.M 1

viii.

संपक( अ#धकार का नाम

ix.

संपक( अ#धकार का पदनाम

x.

मोबाइल

xi.

फैI स

xii.

ई-मेल आईडी

xiii.

ऋणदाता एजJसी का नाम

xiv.

ऋणदाता एजJसी का पता

xv.

यूआईडी नं.

xvi.

यूआईडी जार करने क- 0त#थ

xvii.

अव#ध ऋण क- रा8श

xviii.

nे

xix.

एट स के अंतग(त नी0तगत मामले और उनका  पW टकरण से

संबं#धत ऑनलाइन 8शकायत का 9ववरण

xx.

अ0तoरI त 9ववरण, य द कोई

xxi.

सहायक द तावेजO क- *0तयां

कृपया  कैन क- गई *0त अपलोड करJ

 थान:

0त#थ:

(अ#धकृत ह ताnरकता( का नाम और पदनाम)

मानव संसाधन 9वकास मंालय

(उŠ चतर 8शnा 9वभाग)

नई द ल, दनांक 24 नवPबर 2015

संक प

सं.8-1/2015-सं कृत-II——इस मंालय के दनांक 27.08.2015 के समसंD यक संक प के अनु@म मJ मानव संसाधन 9वकास

मंालय, उŠ चतर 8शnा 9वभाग, भारत सरकार ,वारा राW ƒय सं कृत पoरष, का पुनग(ठन करते हुए अE यn तथा माननीया मानव संसाधन

9वकास मंी के अनुमोदन से यह 0नण(य 8लया गया है ?क पoरष, के गठन को संशो#धत करके सहयोिजत कुला#धप0त, राW ƒय सं कृत

9व,यापीठ, 0त_प0त को पदेन सद य ˆेणी के अंतग(त लाया जाए। यह 0नण(य भी 8लया गया है ?क पoरष, का अE यn ?कसी अ/ य

सं कृत 9व,वान को पoरष, क- बैठक मJ 9वशेष अ0त#थ के _प मJ आमंMत कर सकता है।

2. त,नुसार ˆी एन.गोपाल वामी, कुला#धप0त, राW ƒय सं कृत 9व,यापीठ को सहयोिजत तथा ˆी चमु कृW ण शा ी, वoरW ठ

परामश(दाता (भाषाएं) मानव संसाधन 9वकास मंालय को राW ƒय सं कृत पoरष, मJ 9वशेष अ0त#थ के _प मJ ना8मत ?कया गया है।

3. यह आदेश त: काल *भाव से लागू होगा।

सुखबीर 8संह संधु

संयुI त स#चव

————————————

नई द ल, दनांक 22 फरवर 2016

संक प

सं. एफ. 4-3/2015-यू-3——जब?क भारतीय दाश(0नक अनुसंधान पoरषद का अं0तम गठन 15 अI टूबर, 2012 को ?कया गया था

और पoरषद क- अव#ध 14 अI टूबर, 2015 को समाi त हो गई है, के/ h सरकार ने भारतीय दाश(0नक अनुसंधान पoरषद के संगम „ापन

Hkkx I—[k.M 1]

Hkkjr dk jkti=] ekpZ 12] 2016 ¼QkYxqu 22] 1937½

291

के 0नयम 3 और 0नयमावल के अंतग(त भारतीय दाश(0नक अनुसंधान पoरषद (आईसीपीआर) का पुनग(ठन करने का 0नण(य 8लया है।

सद यO का काय(काल, अE यn और सद य स#चव िजनका काय(काल नीचे दया गया है, को छोड़कर तीन वष( का होगा। पoरषद का त: काल

*भाव से 0नP न8लQखत सद यO के साथ गठन ?कया जाता है:-

क. अE यn

*ो. एस.आर. भ‚ (20 अI टूबर, 2015 को काय(भार zहण करने क- 0त#थ से

तीन वष( के 8लए)

ख. 9व8भ/ न संगठनO से आठ *0त0न#ध:-

i.

9वp व9व,यालय अनुदान आयोग का एक *0त0न#ध

ii.

भारतीय दाश(0नक कांzेस के दो *0त0न#ध

iii.

भारतीय सामािजक 9व„ान अनुसंधान पoरषद का एक *0त0न#ध

iv.

भारतीय ऐ0तहा8सक अनुसंधान पoरषद का एक *0त0न#ध

v.

राW ƒय 9व„ान अकादमी का एक *0त0न#ध

vi.

मानव संसाधन 9वकास मंालय, उŠ चतर 8शnा 9वभाग का एक *0त0न#ध

vii.

9व: त सलाहकार, मानव संसाधन 9वकास मंालय, उŠ चतर 8शnा 9वभाग

ग. भारत सरकार ,वारा ना8मत 12 सद य:-

i.

*ो. कुसुम जैन, पूव( *ोफेसर एवं 9वभागाE यn, दश(नशा , राज थान 9वp व9व,यालय

ii.

*ो. जटाशंकर 0तवार, पूव( *ोफेसर एवं 9वभागाE यn, दश(नशा , इलाहाबाद 9वp व9व,यालय

iii.

*ो. एI स.पी. माओ, *ोफेसर, दश(नशा , पूव•: तर पव(तीय 9वp व9व,यालय

iv.

डॉ. के.अर9वंद राव, 0नदेशक, अ,वैत अकादमी, हैदराबाद

v.

*ो. एस.आर. लला, पूव( *ोफेसर एवं 9वभागाE यn, सं कृत, बSगलोर 9वp व9व,यालय

vi.

*ो. वी. कुटुP बा शा ी, पूव( कुलप0त, सोमनाथ सं कृत 9वp व9व,यालय

vii.

*ो. आर.सी. 8स/ हा, पूव( *ोफेसर एवं 9वभागाE यn, दश(नशा , पटना 9वp व9व,यालय

viii.

*ो. धमा(न/ द शमा(, पूव( *ोफेसर एवं 9वभागाE यn, दश(नशा , चंडीगढ़ 9वp व9व,यालय

ix.

*ो. नरेश कुमार अP बा था, 9वभागाE यn, दश(नशा , पीकेआरएम कॉलेज, धनबाद

x.

*ो. हरेराम Mपाठ¡, *ोफेसर, ˆीलाल बहादुर शा ी राW ƒय सं कृत 9व,यापीठ (सम 9वp व9व,यालय) द ल

xi.

*ो. ओम *काश पांडे, पूव( 9वभागाE यn, सं कृत एवं *ाकृत भाषाएं, लखनऊ 9वp व9व,यालय

xii.

डॉ. राजाराम शुI ला, *ोफेसर वै दक दश(न, बीएचयू वाराणसी

घ. पoरषद ,वारा चार *D यात दश(नशाियO को सहयोिजत ?कया जाएगा।

ड. उ: तर *देश सरकार के दो *0त0न#ध; और

च. *ो. माने/h *ताप 8संह, सद य स#चव, आईसीपीआर (उ/ हJ दनांक 18.11.2013 से तीन वष( क- अव#ध के 8लए आईसीपीआर का

सद य स#चव 0नयुI त ?कया गया था।)

आदेश

एत,वारा यह आदेश दया जाता है ?क यह संकप सामा/य सूचना के 8लए भारत के राजप मJ *का8शत ?कया जाए।

*वीण कुमार

संयुIत स#चव

————————————————

292

THE GAZETTE OF INDIA, MARCH 12, 2016 (PHALGUNA 22, 1937)

[PART I—SEC. 1

MINISTRY OF TEXTILES

New Delhi, the 29th February 2016

RESOLUTION

No.6/19/2013-TUFS—The guidelines containing financial and operational parameters and implementation

mechanism for Revised Restructured Technology Upgradation Fund Scheme (RRTUFS) were notified vide this Ministry’s

Resolution of even number dated 04.10.2013. In partial modification of the said guidelines, the following amendments are

made for considering the UID applications pending since 17.09.2014 until 12.01.2016:

1.

FINANCIAL PARAMETERS

1.1.

Budget Allocation: The budget allocation under the scheme for issuance of UIDs for pending Unique

Identification Number (UID) applications under Revised Restructured Technology Upgradation Fund Scheme

(RRTUFS) which had been uploaded in the i-TUFS software since 17.09.2014 until 12.01.2016 midnight is

Rs. 4005 crore including administrative cost @ 1% of said allocation.

1.2.

An amount of Rs. 8666 crore is also earmarked to consider the claims against the committed liabilities of the

sanctioned cases under erstwhile Modified TUFS (List-I & List-II), RTUFS and RRTUFS upto 31st March 2022.

The committed liabilities of the cases sanctioned under erstwhile Modified TUFS (List-I & List-II) and RTUFS are

under re-conciliation.

1.3.

It is reiterated that the total subsidy outflow on the Standalone Spinning Sector would not exceed 26%.

2.

OPERATIONAL PARAMETERS:

2.1

An i-TUFS software has been put in place. The lending agencies and individual applicants had uploaded the details

of term loan sanctioned under RRTUFS from 17.09.2014 to 12.01.2016 midnight for issuance of UID under

RRTUFS.

2.2

Such applications for issuance of UID numbers will be considered on a first-come-first-served basis, as per the

sequence in which they are received in the i-TUFS software on the central server at the Office of the Textile

Commissioner, subject to eligibility and availability of funds under the scheme.

2.3

With reference to para V. 1(vi) of the Resolution ibid on RRTUFS, no change of segment and loan amount will be

allowed in respect of UID applications already uploaded and pending from 17.09.2014 to 12.01.2016 midnight.

2.4

The correctness of the information/documents submitted for obtaining UID number will be the responsibility of the

applicant and the lending agency(ies) concerned.

2.5

Installation of all machinery by the unit:

2.5.1.

The applicant should ensure that make, year of manufacture, name of the manufacturer and serial number of all the

eligible machinery are clearly inscribed on the machine(s). Moreover, a "Machine Identification Code" (MIC) will

be allotted by the Textile Commissioner, which will be a unique identification number for each machine procured

under the scheme. This MIC shall be mandatorily inscribed on the machinery and shall be verified during the

physical verification at different times.

2.5.2

Through the MIC issued, the details could be deduced regarding the textile segment, the country code of the

manufacturer, the state/province code of the place where machinery will be installed, the machine manufacturer code

(as indicated in scheme), an authorized agent code of the machine manufacturer, the commercial invoice number, the

bill of entry number and the bill of lading number (in case of imported machinery), the machine serial number etc.

3.

PROVISIONS FOR CANCELLATION OF UID:

3.1.

UID issued under the scheme shall be cancelled in cases where:

3.1.1.

The applicant decides not to avail benefits under the scheme for any reason for which he/she may upload request for

cancellation of the issued UID through concerned lending agency using i-TUFS software. This request should be

made in the prescribed Format-1.

3.1.2. The application gets rejected at any stage, the UID shall be suomoto cancelled.

4.

SAFEGUARDS AGAINST MISUTILIZATION:

To prevent misutilization of the subsidy being provided under the scheme, following safeguards are put in place:

PART I—SEC. 1]

THE GAZETTE OF INDIA, MARCH 12, 2016 (PHALGUNA 22, 1937)

293

(a) It is made mandatory that make, year of manufacture, name of the manufacturer and serial number of all the

eligible machinery and MIC number allotted by the Textile Commissioner are clearly inscribed on the machine(s).

(b) A Joint Inspection Team (JIT) to be constituted by the Textile Commissioner will physically verify the machinery

installed/assets created by the unit as stratified sample cases under the scheme while examining claims for

reimbursement.

5.

GRIEVANCE REDRESSAL MECHANISM:

5.1.

All grievances received in prescribed format related to implementation of this scheme shall be redressed by a

Grievance Committee set up under the chairpersonship of the Textile Commissioner with the representatives from the

Ministry of Textiles, Lending Agencies and industry associations etc.

5.2.

The grievances related to policy matter and interpretations thereof shall be required to be submitted in the prescribed

format to the Secretary, Ministry of Textiles, Government of India who will redress the same.

ORDER

ORDERED that the Resolution be published in the Gazette of India for general information.

ORDERED

also

that

copies

of

the

Resolution

may

be

communicated

to

the

concerned

Ministries/Departments/Organizations.

PUSHPASUBRAHMANYAM

Additional Secy.

FORMAT–1

Part I (To be submitted by beneficiary)

CANCELLATION OF ISSUED UID UNDER ATUFS THROUGH CONCERNED LENDING AGENCY

1.

UID Number

Auto generated

2.

UID Approval date

Auto generated

3.

Name of the unit

Auto generated

4.

Address of the unit

Auto generated

5.

e-mail ID of the unit

Auto generated

6.

PAN number

Auto generated

7.

Date of sanction of term loan

Auto generated

8.

Project cost in Rs.

Auto generated

9.

Segment claimed

Auto generated

10.

Lending Agency name

Auto generated

11.

Lending Agency address

Auto generated

12.

Lending Agency Branch Code

Auto generated

13.

Term loan Sanctioned in Rs.

Auto generated

14.

Promoter’s Contribution in Rs.

Auto generated

15.

Term Loan account number

Auto generated

16.

Total Subsidy value pre authorized as per UID in Rs.

Auto generated

17.

Reason for Cancellation of issued UID

294

THE GAZETTE OF INDIA, MARCH 12, 2016 (PHALGUNA 22, 1937)

[PART I—SEC. 1

Certified that:

The information furnished in this format is true & correct and I/We ------- request the cancellation of the aforesaid

UID issued by Office of the Textile Commissioner. Further I/We ------------- shall not claim any subsidy full or in

part thereof with respect to the aforesaid UID issued by Office of the Textile Commissioner, at any time.

Place:

(Signature)

Date :

(Name and designation of the authorised signatory)

Note : Please affix seal/rubber stamp of the Company/Unit along with signature of the authorized signatory.

Part II (To be submitted by Lending Agency)

CANCELLATION OF ISSUED UID UNDER ATUFS THROUGH CONCERNED LENDING AGENCY

Certified that:

The information furnished in by the applicant in PART–I of FORMAT-1 is found correct on the basis of records

available with our bank.

In view of reasons submitted by the applicant unit in the Part I of Format 8, I/We ------------- hereby recommend for

the Cancellation of UID number issued by Office of the Textile Commissioner to the applicant unit.

Place:

(Signature)

Date :

(Name and designation of the authorised signatory with seal)

——————

RESOLUTION

No.6/5/2015-TUFS—The Amended Technology Upgradation Fund Scheme (ATUFS) has been notified by

the Ministry of Textiles vide Resolution of even number dated 13.01.2016. In accordance to the said Resolution, the

Guidelines of ATUFS i.e. financial and operational parameters and implementation mechanism for ATUFS during its

implementation period from 13.01.2016 to 31.03.2022 are laid down as under:

1.

OBJECTIVE:

1.1.

In order to promote ease of doing business in the country and achieve the vision of generating employment and

promoting exports through “Make in India’’ with "Zero effect and Zero defect" in manufacturing, it has been

decided that the Government would provide credit linked Capital Investment Subsidy (CIS) under Amended

Technology Upgradation Fund Scheme (ATUFS).

1.2.

The scheme would facilitate augmenting of investment, productivity, quality, employment, exports along with

import substitution in the textile industry. It will also indirectly promote investment in textile machinery (having

benchmarked technology) manufacturing.

2.

Definitions under the Scheme

2.1

Technology Upgradation would mean induction of state-of-the-art or near-state-of-the-art technology by the

textile industry. Technology levels of the machinery will be updated and specified annually by the Technical

Advisory-cum-Monitoring Committee (TAMC). Machinery with technology levels lower than that specified, are not

permitted for funding under the ATUF Scheme.

2.2.

Capital Investment Subsidy (CIS) would mean the subsidy at the prescribed rate for the segment on investment

made in ‘Fixed Capital Investment’ for purchases of the benchmarked new machinery for each segment under

this scheme, which will be determined on the basic cost of the benchmarked machinery after its installation by

the entity.

2.3.

Garment/Apparel/Made-ups would mean wearable or non-wearable stitched fabrics of which at least two sides

of the fabrics are stitched using sewing machinery.

2.4.

Technical Textiles would mean textile materials and products used primarily for their technical performance

and functional properties rather than their aesthetic or decorative characteristics, where function is the primary

criterion. Technical textiles include textiles for automotive applications, Medical Textiles, Geotextiles,

Agrotextiles, Protective Clothing, Pack Tech etc.

2.5.

ATUFS benefit is available for the benchmarked machinery under the scheme covering the following activities:-

(a) Weaving, Weaving Preparatory and knitting

(b) Processing of fibres, yarns, fabrics, garments and made-ups

PART I—SEC. 1]

THE GAZETTE OF INDIA, MARCH 12, 2016 (PHALGUNA 22, 1937)

295

(c) Technical textiles

(d) Garment/made-up manufacturing

(e) Handloom Sector

(f) Silk Sector

(g) Jute Sector.

3.

ELIGIBILITY CRITERIA FOR GRANT OF CAPITAL INVESTMENT SUBSIDY

3.1

The Capital Investment Subsidy under ATUFS will be available for investment on eligible benchmarked machinery in

the specified segments. Eligible benchmarked machinery will be updated and specified annually as on 1st April by the

Technical Advisory-cum-Monitoring Committee (TAMC). The Textile Commissioner shall notify the list of eligible

benchmarked machinery after approval of the TAMC. Machinery with technology levels lower than those specified

under the scheme will not be eligible for subsidy benefits. Make and Year of manufacture of all the eligible

benchmarked machinery should either be clearly indicated on machine or on a name plate attached to the machine.

3.2.

Machinery purchased directly from the machine manufacturers or their authorized agents will be considered for

benefits under the scheme. However, the benefit would also be available to the garmenting machinery purchased as

per para 4.2.6.

4.

General Eligibility Conditions:

4.1

TYPE OF UNITS:

4.1.1 Entities/Units registered under the Companies Act, 1956 or under the Companies Act, 2013 or under the Companies

(Amendment) Act, 2015 or as per the provisions in the amendments of the said Acts with the Registrar of the

Companies, which have an acknowledgement of Industrial Entrepreneur Memorandum (IEM) with the Department of

Industrial Policy and Promotion except MSME units which will be as per the instructions of the Ministry of MSME or

units which are registered with the concerned Directorates of the State Government showing clearly the activity for

which the unit is registered, will only be eligible to get benefit under this scheme. In case of non-MSME units,

4.1.2 Existing units and new units will be eligible for subsidy within the overall ceiling fixed for an individual entity.

However, in case the entity has availed subsidy under RRTUFS, it will be eligible for only the balance amount within

the overall ceiling fixed for an individual entity.

4.1.3 Textile units including Handloom, Silk, Jute units are eligible to get benefits under this scheme.

4.2

TYPE OF ELIGIBLE TEXTILE MACHINERY :

4.2.1 Under the ATUF Scheme, only new benchmarked machinery for the specified segments indicating the names of

the manufacturers or their authorized agents shall be finalized and notified every year as on 1st April by the Textile

Commissioner on the recommendation of Technical Advisory-cum-Monitoring Committee (TAMC) will be

permitted. Textile Commissioner will obtain list of eligible benchmarked machinery from Jute Commissioner, DC

(Handloom) and Member Secretary, Central Silk Board for Jute, Handloom and Silk sectors respectively. No

second hand machinery is permitted under this scheme.

4.2.2. Accessories/attachments/sample machines/spares received along with the machinery upto a value of 20% of the

machinery cost eligible under ATUFS will also be eligible.

4.2.3 Machinery eligible for one segment is eligible for other segment(s)/activity(ies) also unless its eligibility is

specifically restricted for a particular segment/activity.

4.2.4 Eligibility of any other textile machinery not notified by Textile Commissioner for the year as on 1st April may also

be included subsequently on the recommendation of TAMC, if considered essential.

4.2.5 The issuance of Unique Identification Numbers (UIDs) will be linked to the list of benchmarked machinery eligible

for subsidy under the scheme which will be revised based on the budgetary provision and liabilities, and

recommendation of the TAMC every year.

4.2.6. Machinery (imported and indigenous) purchased directly from the machine manufacturers or their authorized

agents will be considered for benefit under the scheme. However, the benefit will also be available in case new

imported stitching machines required for garmenting/apparel/made-ups manufacturing are purchased from the

authorized stockist/custom warehouse located within the country, provided the purchase is made by the

consignee/from a person who has purchased the same directly from the machine manufacturers or their authorized

agents. Such machinery will also be eligible for benefit under this scheme. Under no circumstances, the machinery

which has been used even once and/or even for testing purpose will be allowed under this scheme.

296

THE GAZETTE OF INDIA, MARCH 12, 2016 (PHALGUNA 22, 1937)

[PART I—SEC. 1

4.2.7

The purchase date means the commercial invoice date both in case of domestic and imported machines.

4.2.8.

Machine Identification Code (MIC) allotted by the Textile Commissioner should be mandatorily inscribed on the

respective machine(s) on which subsidy under this scheme is claimed.

4.2.9.

ELIGIBILITY CRITERIA FOR ASSISTANCE:

(i)

Entities as specified in para 4.1.1. above will only be eligible to get benefit under this scheme.

(ii)

Registration with the concerned authority indicating product manufactured as textiles item(s) is a prerequisite, which

is to be produced at the time of verification of machinery to the Joint Inspection Team (JIT), for availing benefit

under the scheme.

4.3.

OTHER INVESTMENTS ELIGIBLE:

Investment made other than the specified machinery will not be eligible under this scheme.

4.4.

NORMS FOR ELIGIBLE SUBSIDY:

4.4.1

Every eligible individual entity will be paid Capital Investment Subsidy (CIS) under ATUF scheme, on the eligible

investment, as per the rates and the overall subsidy cap indicated below:

Sl. No.

Segment

Rate of Capital Investment

Subsidy (CIS)

CIS per

individual

entity

1.

Garmenting, Technical Textiles

15% on eligible Machines

Rs. 30 crore*

2.

Weaving for brand new Shuttle-less Looms (including

weaving preparatory and knitting), Processing, Jute, Silk

and Handloom.

10% on eligible Machines

Rs. 20 crore*

3(a)

Composite unit/Multiple Segments - If the eligible

capital investment in respect of Garmenting and

Technical Textiles category is more than 50% of the

eligible project cost.

15% on eligible Machines

Rs. 30 crore*

3(b)

Composite unit/Multiple Segments - If the eligible

capital investment in respect of Garmenting and

Technical Textiles category is less than 50% of the

eligible project cost.

10% on eligible Machines

Rs. 20 crore*

*In case the applicant had availed subsidy earlier under RRTUFS, he will be eligible for only the balance amount

within the overall ceiling fixed for an individual entity. The maximum subsidy for overall investment by an

individual entity under ATUFS will be restricted as indicated above for respective segments.

4.5.

SUBSIDY NORMS:

4.5.1.

The capital investment subsidy under ATUFS will be released in full in one go on eligible investment, only after

satisfactory installation/commissioning and commencement of production.

4.5.2

Benefits under the scheme shall be available only if the eligible benchmarked machinery is purchased by

availing term loan from a notified lending agency.

4.5.3

Subsidy will be provided only in case of investment made with institutional finance. Investment made by

availing Buyers Credit, Usance Credit and Sellers Credit will not be eligible for availing benefits under the

scheme unless the entire amount is paid up by the beneficiary before claiming the subsidy and concrete

documentary proof is produced for the same at the time of Joint Inspection Team (JIT) verification within the

prescribed timelines defined in the scheme.

4.6.

CUT-OFF DATE:

4.6.1.

The date of sanction of term loan shall be the date of the letter of the lending agency vide which the sanction of

term loan is communicated to the entrepreneur.

4.6.2.

In case the term loan is sanctioned by a lending agency and thereafter the lending agency distributes/down-sells

the term loan to other lending agency(ies) or has sanctioned term loan under consortium finance, the date of

sanction of the term loan shall be as under:

PART I—SEC. 1]

THE GAZETTE OF INDIA, MARCH 12, 2016 (PHALGUNA 22, 1937)

297

(i)

In case of down-selling the term loan, the date of sanction of term loan by the first lending agency,

which has sanctioned the term loan initially, shall be relevant date and the same shall be the date of letter

of the first lending agency vide which the date of sanction of term loan is communicated to the entity.

(ii)

In case of consortium finance, the consortium leader shall assess eligibility of the project under the

scheme for itself and also for other members of the consortium including the amount of term loan

eligible under the scheme. However, in this case the date of sanction of the term loan shall be the date of

letter of the last lending agency in the consortium, vide which the sanction of loan is communicated to

the entity.

4.6.3.

No multiple finance for a project is allowed under this scheme. The beneficiary will be required to give an

undertaking in this regard in the prescribed format as per Annexure-A.

4.6.4.

In each of the above cases CIS will be disbursed to the account of the loanee/applicant of each lending agency on

pro-rata basis.

4.6.5.

In case where term loan had been sanctioned by the lending agency(ies) under RRTUFS but the period of one

year from the date of sanction of the term loan is not yet over and in those cases where the UID applications have

not yet been uploaded in Textile Commissioner server using i-TUFS upto 12.01.2016 midnight, such cases will

be eligible only for benefits as per the ATUF Scheme notified vide Resolution No. 6/5/2015-TUFS dated

13.01.2016. The applicants of such eligible cases would be required to upload UID applications into the Textile

Commissioner server using i-ATUFS software as per the prescribed format of ATUF Scheme as given in para 6

below. These applications would be considered within six months from the date of issuance of Resolution No.

6/5/2015-TUFS dated 13.01.2016 i.e. upto 12-07-2016 on first-cum-first-served basis and subject to the

availability of budgetary provisions.

4.7.

COVERAGE OF INVESTMENT PRIOR TO SANCTION OF THE LOAN:

Advance/token payment up to the margin money for machine cost can be paid by the unit prior to the date of

sanction of term loan. However, machines purchased on or after date of sanction of the term loan only will be

eligible under the scheme subject to fulfillment of other terms and conditions.

4.8.

BENEFIT OF OTHER SCHEMES:

Textile units are permitted to avail of benefits of State Governments’ Schemes, in addition to the benefit provided

under this scheme, unless specifically disallowed.

4.9.

MERGER/TAKE-OVER OF MANAGEMENT OF THE UNIT:

In case of merger of the companies/units or take-over of the unit(s)/company (ies) by another unit/company, the new

unit/company will be entitled to get the remaining balance of subsidy, if due, under the scheme subject to the

condition that the merger/take over is either permitted by the Registrar of the Companies or by an order of the

Hon’ble High Court and the new unit/company has taken over all the liabilities and assets of the merged/taken over

company/unit and the respective bank has also transferred the term loan of the earlier unit/company in the name of

the existing company/unit which has taken over. However, in such cases, the new unit/company shall submit a

request in the prescribed format as per Annexure–B with all the supporting documents to the Textile Commissioner

for changing the profile of the merged company/unit through the i-ATUFS software.

5.

FINANCIAL NORMS:

5.1.

Under the ATUFS, capital investment subsidy will be provided subject to terms and conditions given below:

5.1.1

Financial norms like security, debt-equity ratio, previous year’s profit position, net worth etc. will be as per the

prevalent norms of concerned lending agency.

5.1.2.

Since the Scheme is credit linked, the entrepreneur will be required to keep the term loan component of machinery

at a minimum of 50% of the total project cost, to become eligible under the scheme.

5.1.3.

All Public Sector Banks, State Financial Corporations (SFCs), State Industrial Development Corporations (SIDCs),

Scheduled Banks and NBFCs registered with RBI are eligible for funding under the scheme.

5.1.4.

The lending agencies covered under RRTUFS as per Resolution No. 6/19/2013-TUFS dated 04.10.2013 will be

automatically covered under this scheme and new lending agency(ies) shall be required to submit their application

in the prescribed format as per Annexure–C to the Textile Commissioner, Mumbai through i-ATUFS software in

order to notify the lending agency under ATUFS.

298

THE GAZETTE OF INDIA, MARCH 12, 2016 (PHALGUNA 22, 1937)

[PART I—SEC. 1

5.1.5.

Foreign Currency Loan: Foreign Currency Loan availed of from overseas branch of the Indian Bank/Foreign bank

having Indian branch will be eligible for benefits under this scheme. However, the loan account should be

operational from the Indian branch also so as to make it possible to transfer the subsidy amount in Indian Rupee

into the loan account of the applicant in the Indian branch.

5.2.

Period of Term Loan under the Scheme :

5.2.1.

The term loan sanctioned for availing the benefit of the scheme should not be for less than three years including

moratorium period for SSI units and not less than 5 years for other categories.

5.2.2.

To prevent misutilisation of the subsidy, it is expected that the unit should at least function for the minimum period

of term loan specified above.

5.3.

In case of consortium finance, the consortium leader shall assess eligibility of the project under the scheme for

itself and also for other members of the consortium including the amount of term loan eligible under the scheme.

5.4.

Transferring the ATUFS loan from one lending agency to another lending agency:

The outstanding principal amount of the loan account under this scheme from one lending agency can be transferred

to another lending agency only once subject to the condition that portfolio (i.e., balance principal amount) remains

unchanged.

5.5.

Conversion of rupee term loan into foreign currency loan and vice-versa:

Conversion of Rupee Term Loan (RTL) into Foreign Currency Loan (FCL) and vice-versa is permitted.

6.

IMPLEMENTATION MECHANISM:

6.1.

The scheme would be executed/implemented by the Textile Commissioner through its Regional/State Offices. A

state/regional level office of the office of Textile Commissioner is being set up in each state which will implement

and monitor ATUFS on priority. Implementation of the scheme will be done in a five-step process:

Step 1: Submission of the term loan application by the entity/unit/applicant along with a copy submitted to the

State/Regional office of the Textile Commissioner who will facilitate sanction of the term loan by the Lending

Agency.

Step 2: Application for Unique Identification Number (UID) by the entity/unit/applicant to the Textile

Commissioner through the lending agency using i-ATUFS software for pre-authorization of subsidy under the

scheme and issuance of UID.

Step 3: Installation of machinery.

Step 4: Submission of the subsidy claim online by the Unit to the Textile Commissioner and forwarding of the

claims by Textile Commissioner to the Ministry of Textiles.

Step 5: Release of the eligible subsidy by the Ministry of Textiles to the applicant’s account.

6.2.

The processes flow of implementation and monitoring mechanism are indicated in the enclosed Annexure D.

6.3.

Step-wise processes are detailed as under:

6.3.1

Step 1: Submission of the term loan application by the entity/unit/applicant and sanction of the term loan by the

Lending Agency:

(i)

The applicant/unit seeking assistance under the scheme shall approach the lending agency for sanction of term

loan under the scheme. The applicant shall keep the term loan component of machinery at a minimum of 50%

of the total project cost, to become eligible under the scheme.

(ii)

The applicant/unit seeking assistance under the scheme shall also simultaneously fill-in details in Format-1

(Part-I) using i-ATUFS software along with details such as PAN number of the company and company

registration number etc. and Detailed Project Report (DPR). After submission of said details using i-ATUFS

software, an ATUFS reference number will be issued by the Textile Commissioner which will be a system

generated number through the i-ATUFS software. In case, an applicant requires guidance on using the

i-ATUFS software, the applicant may take the assistance of the Regional/State office of the Textile

Commissioner in uploading details through i-ATUFS software in the prescribed format and Regional/State

office of the Textile Commissioner shall facilitate him to upload his application as a part of handholding

services to the applicant.

PART I—SEC. 1]

THE GAZETTE OF INDIA, MARCH 12, 2016 (PHALGUNA 22, 1937)

299

(iii) The lending agency shall communicate the sanction of the term loan to the applicant. The date of sanction of

term loan shall be the date of the letter of the lending agency vide which the sanction of term loan is

communicated to the entrepreneur. However, in case of down-selling of the term loan by the lending agency

and in case of consortium finance, the date of sanction of the term loan shall be as per Paras 4.7.3., 4.7.4 and

4.7.5.

6.3.2

Step 2: Application for Unique Identification Number (UID) by the entity/unit/applicant to the Textile

Commissioner through the lending agency using i-ATUFS software for pre-authorization of subsidy under the

scheme and issuance of UID:

The applicant/unit shall, immediately after sanction of the term loan by the lending agency(ies), further submit

details in Format-1 (Part-II & III) using i-ATUFS software alongwith revised DPR, if revised, within six months

from the date of sanction of term loan. In case, an entrepreneur requires further guidance on using the i-ATUFS

software, the entrepreneur may take the assistance of the Regional/State office of the Textile Commissioner in

uploading details through i-ATUFS software in the prescribed Format-1 (Part-II & III) and Regional/State office of

the Textile Commissioner, shall facilitate him to upload his application.

6.3.2.1. A system of time-bound processing of applications as well as automatic alert mechanism through i-ATUFS system

has been put in place. The system of alerts has been developed on a traffic light system as indicated in Table below:

Sl.

No.

%age range of timeline for

completion of the activity

Colour of the submitted

application

1.

1% - 75% time

Green

2.

More than 75% - 90%

Yellow

3.

More than 90% - upto 100%

Red

6.3.2.2 In i-ATUFS software pre-authorization system for issuance of TUFS registration number for receipt of the

applications and UID numbers thereof will be in operation in the office of the Textile Commissioner, Mumbai.

Applications for issuance of UID numbers will be considered on a first-come-first-served basis, as per the sequence

in which they are received in the i-ATUFS software on the central server at the Office of the Textile Commissioner,

subject to eligibility and availability of funds under the scheme.

6.3.2.3. Preference will be given to those applications wherein it is proposed to install energy saving technology/machinery.

This preference will be given by having a separate queue for issuance of UID number to the applicant with energy

saving machinery and those applicants will be issued UID number first-come-first-served basis in this separate

queue. Therefore, if after nth applicants, (n+1)th applicant comes with energy saving machinery he will be first in the

queue of the UID applications for energy saving machinery and will therefore get a priority over the regular queue.

6.3.2.4. An acknowledgement shall be automatically issued through i-ATUFS by e-mail and by SMS facility to the applicant

as soon as sanction of the term loan and other details are uploaded in Format-1 and submitted through i-ATUFS

software by the applicant.

6.3.2.5. The concerned lending agency shall verify the details submitted by the beneficiary in the prescribed format

(Format-1). If the requisite data is found complete in all respects by the lending agency, it will upload the said data

and details in the prescribed format (Format-2) to the office of Textile Commissioner in the i-ATUFS software

within 2 months from the date of submission of Format-1 by the applicant. The time limit of two months includes

rectification time of Format-1 by the applicant, if required.

6.3.2.6. A System generated yellow alert through i-ATUFS software will be sent to the lending agency(ies) if application

submitted by the applicant has not been scrutinized within forty-five (45) days from the date of submission of the

application to the lending agency through i-ATUFS software. This will alert the lending agency(ies) to attend the

case on an urgent basis. Further, if no action is taken by the concerned lending agency(ies) within another nine (9)

days, a system generated red alert will be sent to their Executive Director/CGM for taking-up the matter with the

concerned officer(s) of the lending agency(ies) so that the case is processed immediately. In case, the lending

agency(ies) fails to submit application within two months from the date of receipt of the application through

i-ATUFS software, it will be considered as breach of the said guidelines.

6.3.2.7. The UID applications which are found complete in all respects will be processed within one (1) month in the Office

of the Textile Commissioner for allotment of UID numbers after checking the mandatory details as per the

300

THE GAZETTE OF INDIA, MARCH 12, 2016 (PHALGUNA 22, 1937)

[PART I—SEC. 1

prescribed format (Format-3) and UID shall be issued. The correctness of the information/documents submitted for

obtaining UID number will be the responsibility of the applicant and the lending agency(ies) concerned.

6.3.2.8. If there is any apparent discrepancy, the UID application will be referred back through the i-ATUFS software to the

applicant and/or concerned lending agency for rectification and re-submission. The re-submission of the application

shall be within a maximum period of one (1) month and shall be considered again on first-come-first-served basis.

6.3.2.9. A System generated yellow alert will be sent to the concerned officers in the Office of Textile Commissioner in case

application is not attended within twenty three (23) days of its receipt from the lending agency. In case, no action is

taken by the Officer concerned within twenty seven (27) days of its receipt from the lending agency, system

generated red alert will be sent to their controlling officer and the controlling officer shall ensure that the application

is attended urgently to meet the timeline.

6.3.2.10. Mere submission of an application for issuance of a UID number in the i-ATUFS software will not entitle the unit

for issue of UID number and subsidy under the scheme. A unit would become eligible for subsidy under the scheme

only after it has been issued an UID number by the Textile Commissioner.

6.3.2.11. An i-ATUFS software is programmed such that no UID can be issued if the subsidy cap of that unit (including

preauthorized RRTUFS subsidy) is reached or/and the budget provision is exhausted.

6.3.2.12. In order to ensure data integrity and prevent any possible misuse of the scheme, the data submitted by the

beneficiary and certified by the concerned lending agency through web portal of the Textile Commissioner shall be

treated as frozen and subsidy payment shall be considered strictly as per the physical assessment of eligible subsidy

or as per the frozen data, whichever is less.

6.3.2.13. In case of any apparent mistake in the UID issued or in case of revision in the project during its implementation, one

time correction of the UID details will be considered/permitted on case to case basis by the Textile Commissioner

within one year from the date of issuance of UID provided that there will be no increase in subsidy.

6.4.

Step 3: Installation of machinery:

6.4.1.

Only benchmarked eligible benchmarked machinery specified under the scheme will be installed by the unit.

6.4.2.

The applicant should ensure that make, month/year of manufacture, name of the manufacturer and serial number of

all the eligible benchmarked machinery are clearly indicated on the machine(s). Moreover, a "Machine Identification

Code" (MIC) will be allotted by the Textile Commissioner, which will be a unique identification number for each

machine procured under the scheme. This MIC shall be mandatorily inscribed on the machinery and shall be verified

during the physical verification at different times.

6.4.3

It is mandated that the machine serial number should be expressly written on the shipping documents i.e.

“Commercial Invoice” or “Bill of Lading” or the “Airways Bill” or the same is expressly written in the “Bill of

Entry” in case of imported machinery. In case of domestic purchases, the machine serial number should be expressly

mentioned in the “Commercial Invoice”. This is an essential part of requirement under these guidelines w.e.f.

01.04.2016 and would be essential to assign the MIC number to the applicant. Therefore, absence of this information

will make the machinery liable to be ineligible for benefit under this scheme.

6.4.4

Through the MIC issued, the details could be deduced regarding the textile segment, the country code of the

manufacturer, the state/province code of the place where machinery will be installed, the machine manufacturer

code (as indicated in scheme), an authorized agent code of the machine manufacturer, the commercial invoice

number, the bill of entry number and the bill of lading number (in case of imported machinery), the machine serial

number etc.

6.4.5

The system generated MIC will be allotted by the Textile Commissioner immediately to the applicant when he/she

will submit request for conducting Joint Inspection Team (JIT) verification after installation/commissioning of the

machinery.

6.4.6

The installation/commissioning of the machines covered under the UID shall be done within one (1) year from the

date of sanction of term loan. However, the same will be extendable upto two (2) years on a case to case basis with

the approval of the Textile Commissioner. The Textile Commissioner will record in writing the reasons for giving

such extensions.

6.4.7

System generated first reminder will be sent to the applicant through registered e-mail and SMS in case the applicant

does not submit his/her request for undertaking physical verification of the installed machinery within ten (10)

months from the date of sanction of term loan, for expediting the installation/commissioning of the machinery for

which UID was obtained.

PART I—SEC. 1]

THE GAZETTE OF INDIA, MARCH 12, 2016 (PHALGUNA 22, 1937)

301

6.5.

Step 4: Submission of the subsidy claim online by the Unit to the Textile Commissioner and approval of the same.

6.5.1.

After satisfactory installation/commissioning of the machinery and commencement of commercial production, the

applicant shall immediately submit his/her request for the same in prescribed format (Format-4) to the Textile

Commissioner i.e. within one year from the date of sanction of term loan for undertaking physical verification by a

JIT using i-ATUFS software. This timeline is extendable upto two (2) years on case to case basis with the approval

of the Textile Commissioner. The Textile Commissioner will record in writing the reasons for giving such

extensions.

6.5.2.

In case, the applicant fails to submit application after installation of the machinery within prescribed timelines for

undertaking physical verification by a JIT in prescribed format (Format–4) using i-ATUFS software, the UID issued

to the applicant will be automatically cancelled and will not be considered further for subsidy benefit under this

scheme.

6.5.3

In order to ensure that no beneficiary unit avails subsidy beyond the prescribed ceiling, applicant will be required to

furnish a declaration on unit’s letter head (Format-5) indicating the details of the subsidy availed by the beneficiary

unit under RRTUFS. In case the applicant had availed subsidy earlier under RRTUFS, he/she will be eligible for

only the balance amount within the overall ceiling fixed for an individual entity.

6.5.4

The Textile Commissioner will constitute a Joint Inspection Team (JIT) comprising of the officers/representatives of

the Textile Commissioner, respective lending agency, a Textile Research Association and an Industry Association to

verify the technology level of the machine(s) installed under the scheme and certify the eligibility and eligible

subsidy amount as per the guidelines of the scheme in prescribed format (Format-6).

6.5.5

The JIT will verify and certify the installation/commissioning of the machinery and commencement of the

commercial production in the prescribed format (Format-6) along with all supporting documents and photographs of

the installed machinery, within maximum eighty eight (88) days of the receipt of request for JIT. Further, JIT has to

submit the report within two (2) days of conducting the physical verification through the i-ATUFS software and will

also forward a copy thereof to the Textile Commissioner.

6.5.6

A system generated yellow alert will be sent to the Officer-Incharge of the concerned Regional/State Office of the

Textile Commissioner, if JIT does not complete its verification and uploads the same in prescribed format (Format-

6) using i-ATUFS software within seventy (70) days of receiving request for JIT verification. In case, he/she fails to

act within eighty five (85) days of receiving request for JIT from the applicant, a system generated red alert to the

concerned Officer-Incharge including his controlling officer will be sent for taking urgent action on a priority.

6.5.7

The Office of the Textile Commissioner will process the subsidy claim in the prescribed format (Format-7) after

receiving the report from the JIT for approval/rejection by Textile Commissioner within one month of the receipt of

JIT report.

6.5.8

A system generated yellow alert will be sent to the concerned Director/JTxC/ATxC, if the JIT report is not

processed within twenty three (23) days of its receipt through i-ATUFS software. In case, they fail to act within

twenty seven (27) days of receipt of the JIT report, a system generated red alert will be sent to the Textile

Commissioner for ensuring urgent action on priority.

6.5.9

The Office of the Textile Commissioner will prepare bill for the approved claims and submit the challan for subsidy

claim to Ministry of Textiles (MOT) through i-ATUFS after approval by Textile Commissioner.

6.6.

Step 5: Release of the eligible subsidy by the Ministry of Textiles to the applicant’s account.

6.6.1

Ministry of Textiles (MOT) will process the claims received through i-TUFS software from the Textile

Commissioner as per (Format-8) and will directly release the eligible subsidy to the account of the loanee/applicant

maintained with the same lending agency (ies) within 21 days from the date of receipt of the claim bill/challan

through i-ATUFS software subject to the availability of funds. The account of the unit should be linked to the PAN

number of the Unit and Aadhar number (wherever applicable).

6.6.2

Full amount will be released in case the applicant has taken loan from one lending agency only under ATUFS.

However, in case the applicant has availed facility of down-selling of term loan or consortium financing, the subsidy

amount will be credited into the account of the loanee on pro-rata basis.

6.6.3

A system generated yellow alert will be sent to the concerned Deputy Secretary/Director of the Ministry of Textiles,

if the received claim bills/challans are not processed within seventeen (17) days of its receipt from the office of the

Textile Commissioner through i-ATUFS software. In case, the same is not processed within nineteen (19) days of

receipt of the claim bills from the office of the Textile Commissioner, a system generated red alert to the Joint

302

THE GAZETTE OF INDIA, MARCH 12, 2016 (PHALGUNA 22, 1937)

[PART I—SEC. 1

Secretary (ATUFS)/the Additional Secretary (ATUFS) will be sent for ensuring that the same are processed within

given timeline as defined in para 6 and process flow chart (Annexure-D).

6.6.4

The release of the subsidy into the account of the loanee/applicant in DBT mode would be a deemed utilization of

the amount of subsidy and no further utilization certificate would be necessary.

7.

MONITORING MECHANISM:

The scheme will be administered with a two stage monitoring mechanism i.e. by Technical Advisory-cum-

Monitoring Committee (TAMC) and Inter-Ministerial Steering Committee (IMSC).

7.1

Technical Advisory-cum-Monitoring Committee (TAMC):

A Technical Advisory-cum-Monitoring Committee (TAMC) under the Chairpersonship of Textile Commissioner

will be constituted with technical experts from the Government and the industry covering the different segments, as

members. The composition and functions of TAMC are given at Annexure-E.

7.1.1.

Amendment in the list of machinery in terms of addition/deletion will be done by the TAMC.

7.1.2.

If any question of interpretation or clarification is raised by the lending agency/entrepreneurs as to the eligibility

of any unit or machinery under the scheme, the decision of the TAMC will be final.

7.1.3.

The TAMC will also monitor and review the progress of the scheme including segmental progress and apprise

the Ministry and IMSC quarterly.

7.2

Inter-Ministerial Steering Committee (IMSC):

7.2.1

An IMSC will be constituted under the Chairpersonship of Minister of Textiles with the representatives of the

Ministry of Finance (Deptt. of Expenditure and Deptt. of Financial Services), Department of Heavy Industry,

Deptt. of Commerce, Deptt. of Industrial Policy & Promotion, NITI Aayog, selected lending agencies, Textile

Industry Associations etc. IMSC would be responsible for monitoring and formulation of guidelines for effective

implementation of the scheme in accordance with the Cabinet Committee on Economic Affairs (CCEA)’s approval.

The composition and functions of IMSC are given at Annexure-F.

7.2.2

The IMSC will review the progress of the scheme half yearly and ensure its effective implementation.

8

PROVISIONS FOR CANCELLATION OF UID:

8.1.

UID issued under the scheme shall be cancelled in cases where:

8.1.1.

The applicant fails to submit intimation of installation of the machinery within two years from the date of sanction

of term loan for undertaking physical verification by a Joint Inspection Team (JIT). The UID issued to the applicant

will be automatically cancelled and will not be considered further for subsidy benefit under this scheme.

8.1.2. The applicant decides not to avail benefits under the scheme for any reason for which he/she may upload request for

cancellation of the issued UID through concerned lending agency using i-ATUFS software. This request should be

made in the prescribed format (Format - 9).

8.1.3.

In case the application gets rejected at any stage for any other reason, the UID shall be suo-moto cancelled.

9

SAFEGUARDS AGAINST MISUTILIZATION:

9.1.

To prevent misutilisation of the subsidy being provided under the scheme, the following safe-guard are put in place:

9.1.1.

Assets created by the unit against the allotted UID under this scheme and technology level thereof will be physically

verified by a Joint Inspection Team (JIT) comprising of the officers/representatives of the Textile Commissioner,

representatives of respective lending agency, Textile Research Association and industry association. The JIT will

certify the eligibility and eligible subsidy amount as per the guidelines of the scheme.

9.1.2.

It is made mandatory that make, year of manufacture, name of the manufacturer and serial number of all the eligible

benchmarked machinery are clearly indicated on the machine (s). Moreover, a "Machine Identification Code" (MIC)

will be allotted by the Textile Commissioner, which will be a unique identification number for each machine

procured under the scheme. This MIC shall be mandatorily inscribed on the machinery and shall be verified during

the physical verification at different times.

9.1.3.

In order to ensure that no beneficiary unit avails subsidy beyond the prescribed ceiling, applicant will be required to

furnish a declaration duly signed by the authorized person of the entity on the unit’s letter head indicating the details

of the subsidy availed by the beneficiary unit under RRTUFS and ATUFS.

PART I—SEC. 1]

THE GAZETTE OF INDIA, MARCH 12, 2016 (PHALGUNA 22, 1937)

303

9.1.4.

The Officers of the Ministry of Textiles will periodically inspect the machinery installed/commissioned by units, on

a random basis.

9.1.5.

Third Party Engineering Consultant(s) will be engaged by the Ministry to undertake inspection of the units availing

benefits under the scheme on sample basis.

9.1.6.

It is expected that the unit should atleast function for a minimum period of three years. To monitor the functioning

of the unit for three years the lending agency (ies) should keep the minimum re-payment period including

moratorium period as three years in case of SSI units and five years for other units.

10

GRIEVANCE REDERESSAL MECHANISM:

10.1. All grievances received in prescribed format (Format-10) related to implementation of this scheme shall be redressed

by a Grievance Committee set up under the chairpersonship of the Textile Commissioner with the representatives

from the Ministry of Textiles, Lending Agencies and industry associations etc.

10.2. The grievances related to ATUFS policy matter and interpretations on ATUFS shall be required to be submitted in the

prescribed format (Format-11) to the Secretary, Ministry of Textiles, Government of India who will redress the same.

11.

AMENDMENT OF GUIDELINES:

Any amendment of these guidelines involving financial issues may be done with the prior approval of the

Expenditure Finance Committee (EFC). Amendment involving issues other than financial may be made with the

approval of IMSC.

ORDER

ORDERED that the Resolution be published in the Gazette of India for general information.

ORDERED also that copies of the Resolution may be communicated to the concerned

Ministries/Departments/Organizations.

PUSHPA SUBRAHMANYAM

Additional Secretary

——————

Annexure -A

NO MULTIPLE FINANCING UNDERTAKING

(On the letter head of unit)

Date:

We________________________(Name of the beneficiary unit) hereby certify that no machinery or any part thereof, for

which benefits are claimed under ATUFS has availed loan from more than once from this bank and/or any other

bank(s)/Lending Agency(ies)/Financial Institution(s).

Following are the details of all project(s) undertaken and loans availed where benefits under TUFS have been availed by us:

Sl. No.

NAME OF PROJECT

PROJECT

AMOUNT

(PROJECT

COST)

LOAN(S) TAKEN

FOR PROJECT

(LOAN

DISBURSED

AMOUNT)

LENDING

BANK(S)/F.I.(S)/L.A.(S)

TOTAL

304

THE GAZETTE OF INDIA, MARCH 12, 2016 (PHALGUNA 22, 1937)

[PART I—SEC. 1

We also undertake that in the event of any inconsistency in the above mentioned facts, the entire subsidy along-with penal

interest as imposed on us by the Lending Agency or Government shall be reimbursed to the Government directly or through

the lending agency as per the direction of the Government. Government or Lending Agency is also authorized to take any

other penal action like disentitlement, blacklisting, etc., as it may deem fit.

Signature of the Authorized signatory

Name and Designation

For and on behalf of (Name of the beneficiary unit)

(Please affix Seal/Rubber Stamp of the Company/unit)

* TUFS (Technology Upgradation Fund Scheme) means and includes TUFS, MTUFS, RTUFS, RRTUFS and ATUFS

TUFS Ref. No._________________

Annexure - B

Request for takeover of term loan from one Bank/lending agency to another lending agency

Note: While change over to another lending agency the unit has to ensure that the new lending agency is covered under

ATUFS

Sl.

No.

Description

Details

Supporting

documents

attached

1.

UID Number and Date

2.

Name of the Current Bank

3.

Total Term loan sanctioned by the initial Bank (in Rupees)

4.

Outstanding Amount in the loan Account under TUFS

which is being taken over by the other Bank

5.

Name of the New Bank

6.

Upto which quarter the claim has been lodged by previous

Bank

7.

Whether previous Bank has issued NOC for taking over the

account by another Bank under TUFS

8.

Actual Amount Of Term Loan Taken Over By New Bank

with details of sanction letter issued by the new Bank

9.

Quarter from which new Bank will submit claim

10.

Reasons for change of Bank

Certified that the information furnished above is true and correct and is based on the documentary evidence available with the

unit, which may be verified by the designated officers at any time.

Place:

(Signature)

Date :

(Name and designation of the authorised signatory)

Note : Please affix seal/rubber stamp of the Company/Unit along with signature of the authorized signatory.

PART I—SEC. 1]

THE GAZETTE OF INDIA, MARCH 12, 2016 (PHALGUNA 22, 1937)

305

Annexure - C

FORMAT FOR INCLUSION OF LENDING AGENCY UNDER ATUFS

(To be submitted to the Textile Commissioner through i-ATUFS software)

1.

Name of the Bank

2.

Address

3.

IFSC Code

4.

MICR Code

5.

Name of the Contact Person

6.

Contact No. (O)

7.

Mobile No.

8.

e-mail I.D.

9.

Fax No.

10.

Name of the Branch

11.

IFSC Code of Branch

12.

MICR Code of Branch

13.

Contact Person

14.

Contact No. (O)

15.

Mobile No.

16.

e-mail I.D.

17.

Fax No.

Signature

Date:

Name & Designation with Seal

List of enclosures :

1. Copy of Banking Licence issued by RBI under Banking Regulation Act, 1949.

2. Copy of letter issued by RBI for inclusion in the second schedule to the RBI Act, 1934.

3. Copy of letter issued by GOI for registration under Multi State Cooperatives Act, if applicable.

4. Copy of PAN/TAN No.

5. Copies of Audited Balance Sheet for the preceding 3 years.

6. Other relevant information, if any.

306

THE GAZETTE OF INDIA, MARCH 12, 2016 (PHALGUNA 22, 1937)

[PART I—SEC. 1

ANNEXURE–D

STEP -1

Application to Bank for Loan, submission of details through i-ATUFS and

generation of ATUF reference number by Textile Commissioner

Bank

UID GENERATION

STEP -2

Bank sanctions term loan to applicant and communicates to Applicant and

Textile Commissioner

Through i-ATUFS (for Pre-authorizing subsidy benefit under ATUFS)

Processed by Bank

Bank verifies submitted form-1

Fill Loan Disbursement Details, if any

Bank fills loan details in form-2 and submit to Textile Commissioner

Textile Commissioner scrutinizes as

per Form - 3

Textile Commissioner approves application

& Generates UID

TUFS Applicant

get UID

Communication to Applicant &

Bank through e-mail & SMS.

Applicant Adds details in form-1 (Part-II) and submit to Bank using i-ATUFS

Banks

Norms

6 Months

2 Months

TxC

1Month

PART I—SEC. 1]

THE GAZETTE

E OF INDIA, MARCH 12, 2016 (PHALGUNA 22, 1937)

)

307

308

THE GAZETTE OF INDIA, MARCH 12, 2016 (PHALGUNA 22, 1937)

[PART I—SEC. 1

ANNEXURE–E

COMPOSITION OF TAMC

1.

Textile Commissioner, Ministry of Textiles, Mumbai

Chairperson

2.

Director (ATUFS), Ministry of Textiles

Member

3.

Jute Commissioner, Ministry of Textiles, Kolkata

Member

4.

Industrial Adviser, Department of Heavy Industry, New Delhi

Member

5.

Chairman, Confederation of Indian Textile Industry, New Delhi

Member

6.

Chairman, Indian Woollen Mills Federation (IWMF) Mumbai

Member

7.

Chairman, Federation of Indian Art Silk Weaving

Industry (FIASWI), Surat

Member

8.

President, Indian Spinners Association (ISA), Mumbai

Member

9.

President, South India Spinners Association (SISPA), Coimbatore

Member

10.

President, Ludhiana Knitwear Club, Ludhiana

Member

11.

Chairman, Textile Machinery Manufacturers Association of India (TMMAI),

Mumbai

Member

12.

President, Indian Jute Mills Association (IJMA), Kolkata

Member

13.

Chairman, Clothing Manufacturers’ Association of India (CMAI), Mumbai

Member

14.

Chairman,

Powerloom

Development

and

Export

Promotion

Council

(PDEXCIL), Mumbai

Member

15.

Chairman, Cotton Textiles Export Promotion Council (TEXPROCIL), Mumbai

Member

16.

Chairman, Apparel Export Promotion Council (AEPC),Gurgaon

Member

17.

Chairman, Synthetic and Rayon Textiles Promotion Council, Mumbai

Member

18.

In-charge, TUFS Cell, IDBI Bank, Mumbai

Member

19.

In-charge, TUFS Cell, Small Industries Development Bank of India(SIDBI),

Lucknow

Member

20.

Chairman, The Southern India Mills’ Association, Coimbatore

Member

21.

Chairman, Indian Technical Textile Association (ITTA), Mumbai

Member

22.

In-charge, TUFS Cell, Industrial Finance Corporation of India, New Delhi

Member

23.

In-charge, TUFS Cell, State Bank of India, Mumbai

Member

24.

In-charge, TUFS Cell, Central Bank of India, Mumbai

Member

25.

In-charge, TUFS Cell, Bank of India, Mumbai

Member

26.

In-charge, TUFS Cell, NCDC, New Delhi

Member

27.

In-charge, TUFS Cell, Bank of Baroda, Mumbai

Member

PART I—SEC. 1]

THE GAZETTE OF INDIA, MARCH 12, 2016 (PHALGUNA 22, 1937)

309

28.

In-charge, TUFS Cell, Indian Overseas Bank, Mumbai

Member

29.

In-charge, TUFS Cell, Union Bank of India, Mumbai

Member

30.

In-charge, TUFS Cell, Punjab National Bank, New Delhi

Member

31.

Director, Bombay Textile Research Association, Mumbai

Member

32.

Addl./Joint Textile Commissioner in-charge of ATUFS, Office of Textile

Commissioner, Mumbai

Member Secretary

2. The TAMC will monitor and review the progress of the scheme including segmental progress and apprise the

Ministry and the IMSC quarterly.

3. The TAMC will update and specify the eligible benchmarked machinery annually as on 1st April.

ANNEXURE–F

COMPOSITION OF IMSC

1.

Union Minister of Textiles

Chairperson

2.

Secretary, Ministry of Textiles

Vice Chairman

3.

Secretary, Department of Expenditure

Member

4.

Secretary, Department of Financial Services

Member

5.

Secretary, Department of Commerce

Member

6.

Secretary, Department of Industrial Policy & Promotion

Member

7.

Secretary, Department of Heavy Industry

Member

8.

Secretary, Ministry of Micro, Small & Medium Enterprises

Member

9.

Deputy Governor, Reserve Bank of India

Member

10.

Addl. Secretary & Financial Advisor, Ministry of Textiles

Member

11.

Textile Commissioner, Ministry of Textiles, Mumbai

Member

12.

Jute Commissioner, Ministry of Textiles, Kolkatta

Member

13.

Development Commissioner (Handlooms), New Delhi

Member

14.

Adviser, (in-charge of the textiles), NITI Aayog, New Delhi

Member

15.

Member Secretary, Central Silk Board, Bengaluru

Member

16.

Chairman & Managing Director, IDBI

Member

17.

Chairman & Managing Director, SIDBI

Member

18.

Chairman & Managing Director, IFCI

Member

19.

Chairman, State Bank of India

Member

20.

President, Textile Machinery Manufacturers Association of India

(TMMAI), Mumbai

Member

21.

Chairman, Confederation of India Textile Industry (CITI), New Delhi.

Member

310

THE GAZETTE OF INDIA, MARCH 12, 2016 (PHALGUNA 22, 1937)

[PART I—SEC. 1

22.

Chairman, Federation of India Art Silk Weaving Industry, Surat.

Member

23.

Chairman, Indian Woolen Mills Federation (IWMF), Mumbai

Member

24.

Chairman, Powerloom Development & Export Promotion Council

(PDEXCIL), Mumbai

Member

25.

Chairman, Indian Jute Mills Association (IJMA), Kolkata

Member

26.

President, Clothing Manufacturers Association of India, Mumbai

Member

27.

Chairman, Indian Technical Textile Association (ITTA),Mumbai

Member

28.

Chairman, South India Spinners Association, Coimbatore

Member

29.

Chairman, The Southern India Mills’ Association, Coimbatore

Member

30.

Additional/Joint Secretary (in-charge of ATUFS)

Member-

Secretary

2.

IMSC would be responsible for monitoring and formulation of guidelines for effective implementation of the

scheme in accordance with the CCEA approval. The IMSC will review the progress of the scheme half yearly and ensure its

effective implementation.

3.

Any amendment to the scheme involving issues other than financial may be made with the approval of IMSC.

*****

FORMAT - 1

(To be submitted by beneficiary)

PART - I

NOTE:

1. Please tick ( √ ) the correct option wherever applicable

2. Amount must be entered in Rupee only. In case, it will be entered in thousand/lakh or crore, application will be

returned for correction and beneficiary may loose seniority in pre-authorising subsidy)

3. The beneficiary who has already filled Format I Part I online for any term loan under RR-TUFS need not have to

submit Part I of Format I again, if there is no change in the information. They may however has to fill up all other

details invariably in Part II to Part IV of Format I.

A. i. Name of the applicant’s Bank/Institution

ii. Address of the applicant’s Bank/Institution

iii. IFSC code

iv. Tel. No with STD code

v. Fax No

vi. E-mail ID

B. i. Name of the bank's contact officer

ii. Mobile No.

iii. Fax No.

iv. E-mail ID

C. Date of application to Bank for Term Loan

PART I—SEC. 1]

THE GAZETTE OF INDIA, MARCH 12, 2016 (PHALGUNA 22, 1937)

311

A. INFORMATION ON COMPANY/FIRM

Name of the company/firm

1. Name of the

promoters/directors/proprietors/partners

Name

PAN no.

DIN no.

Aadhar card

no.

2.

Name of the contact person

Tel.No

Mobile No.

Fax No,

E-mail ID

3.

Plant(s) Address(es) of the company/firm with

pincode number

Tel.No with STD code

Fax No,

E-mail ID

4.

Registered office address with pin code number:

Tel. No with STD code

Fax No,

E-mail ID

5.

Unit's PAN No.

6. Whether it is a

MSE (As per

MSMED Act

2006)

Non-MSE (As per MSMED

Act 2006)

7. Management i.e.

proprietorship/partnership/private limited

company/public limited company/co-

operative/others?

8. a) Whether it is an existing company/firm or a

new company/firm?

Existing

New

b) Please furnish its date of incorporation

_____/_____/_____

(dd/mm/yyyy)

9. a. Segment

i.

Existing

ii. After Expansion

b. Brief background of the company/firm including

its present activities

c.

Products being manufactured/to be manufactured

d. End-use applications of the products

312

THE GAZETTE OF INDIA, MARCH 12, 2016 (PHALGUNA 22, 1937)

[PART I—SEC. 1

B. INFORMATION ON THE PRESENT PROJECT

[ Please upload Detailed Project Report (DPR) on which bank has extended term loan.]

1. Brief description of the present project

2. Segment

Weaving

preparatory/weaving/knitting/processing/technical

textiles/garmenting

3. Expected date of completion of the project

_____/_____/_____

(dd/mm/yyyy)

FORMAT 1

PART II

A. Main Plant & Machinery/Equipment Proposed to be installed under the Project:

(Amount in Rs. )

SR.

NO.

DESCRI

PTION

OF THE

MACHI

NERY/E

QUIPM

ENT

9 digit

code/sr.

no.of the

machine

NU

MB

ER

OF

MA

CHI

NER

Y

ITE

MS

WHETHER MACHINERY

PURCHASED BEFORE OR

AFTER SANCTION OF

THE TERM LOAN

(TICK WHICHEVER

COLUMN IS

APPLICABLE)

Please mention details of

Proforma invoice/Final

invoice with nos and date)

TOTAL

COST

(MACH

INE-

WISE)

*Basic

Cost of

Machine

/equipm

ent

(MACH

INE-

WISE)

ANNEXU

RE NO. &

ITEM NO.

AS PER

THE GR

ON MINT

SPECIFIC

ATIONS/

DESCRIPT

ION OF

THE

MACHINE

/EQUIPME

NT AS

INDICATE

D IN THE

GR ON

MINT

ACTUAL

SPECIFI

CATION

S/DESCR

IPTION

OF THE

MACHIN

E/EQUIP

MENT

VIS-À-

VIS

MINT

RELATE

D

SPECIFI

CATION

S/

DESCRIP

TION AS

INDICAT

ED IN

COL.11]

WHETHER IT IS ACQUIRED AS

A COMPLETE MACHINE

OR

IT IS PART-

UPGRADATION/PART-

REPLACEMENT OF AN

EXISTING MACHINE?

(TICK WHICHEVER COLUMN

IS APPLICABLE)

Imp

orte

d

I

n

d

i

g

e

n

o

u

s

Machine

purchased

before

sanction of

the term

loan

Machine

purchased

after sanction

of the term

loan

Ann

exur

e

No.

It

e

m

N

o.

Complete

machine

Part up-gradation/

part- replacement of

an existing machine

1

2

3

4

5

6

7

8

9

10

11

12

13

14

NOTE:

* Basic Price (Machine-Wise) In Respect Of Indigenous Machinery/Equipment and CIF Price (Machine-wise) in r/o

Imported Machinery/Equipment

PART I—SEC. 1]

THE GAZETTE OF INDIA, MARCH 12, 2016 (PHALGUNA 22, 1937)

313

a.

Total term loan(s) sanctioned

Rs.______________________

(please upload a copy of term loan(s) sanctioned

letter(s) received from the banks)

b.

Promoters Contribution

Rs._________ _____;

___% of the project

cost

c. Term Loan Account No.

nuemeric number only

d. Whether the term loan is being shared by

other Bank(s)/Institution(s)?

Yes

No

e. If yes, indicate sharing pattern

Name of the

Bank/Institution

Amount (in Rs.)

Total

Date of commencement of implementation of

the project

_____/_____/_____

(dd/mm/yyyy)

Degree/%age of Modernization of the unit

Before this project

After this project

FORMAT–1 (Continued)

PART–III

1.

INFORMATION ON TUFS LOANS AND SUSIDY BENEFITS AVAILED BY THE UNIT TILL DATE (FROM

1999 ONWARDS) AND IMPROVEMENTS ACHIEVED SO FAR:

Details of TUFS loan availed till date and Subsidy received

As a result of TUFS project implementation the benefit accrued

Month/

year

Project

cost

Term loan

sanctioned

Bank/L

A

*Segment

Amount

of

subsidy

received

*Capacity

added/replaced

Increase

in turn

over

(%)

Increase

in profit

(%)

Increase

in

exports

(%)

Improvement

in quality**

Extent of

modernisation

achieved

(%)***

Note: *1. Segment & Capacity details will be selected from drop-down-menu provided.

**2. As assessed by the beneficiary unit (may be good/very good/excellent etc )

***3. Extent of modernization achieved will as per self-assessment by beneficiary.

2.

INFORMATION ON TUFS LOANS AND SUSIDY BENEFITS AVAILED BY THE UNIT UNDER RRTUFS:

Sr. No.

Account Number

TUF Ref. No.

& UID No

Authorized Subsidy for Full

Tenure in Rs.

Subsidy Received till filling

application in Rs.

3.

PERSONAL DETAILS OF BENEFICIARY OWNER

(Please tick wherever applicable)

I. IN THE CASE OF PROPREITORY

Gender

Male/Female

Whether belongs to SC/ST

Yes

No

Whether belongs to minority community

Yes

No

SC/ST

314

THE GAZETTE OF INDIA, MARCH 12, 2016 (PHALGUNA 22, 1937)

[PART I—SEC. 1

II. IN THE CASE OF PARTNERSHIP FIRMS

Number of Partners

Gender( Numbers)

Male

Female

SC/ST (Numbers)

SC/ST

Others

Minority Community(Numbers)

Minority

Others

III. IN THE CASE OF LIMITED COMPANIES

Number of Directors including MD

Gender( Numbers)

Male

Female

SC/ST (Numbers)

SC/ST

Others

Minority Community(Numbers)

Minority

Others

INFORMATION ON MICRO AND SMALL ENTERPRISES (MSEs)

ITEMS 1 TO 4 BELOW TO BE FILLED FOR MSE UNITS ONLY [IN OTHER WORDS, ITEMS 1 TO 4 BELOW

TO BE SKIPPED FOR NON-MSE UNITS]

INFORMATION ON EMPLOYMENT (in numbers)

Existing Employment

Employment to be generated under this

project

Total After completion of this project

Managerial

Supervisory

workers

Managerial

Supervisory

workers

Managerial

Supervisory

workers

DETAILS OF CAPACITY

Segment

Present

installed

capacity

Proposed

expansion

[net]/new

Capacity

Installed

capacity on

completion of

the project

1

2

3

4

1.

Twisting/T.F.O. (in numbers of machines)

2.

Warping (in numbers of machines)

3.

Fibre Dyeing (in Kg./month)

4.

yarn Dyeing (in Kg./month)

5.

Sizing (in numbers of machines)

6.

Shuttle-less Looms (in nos of loom)

7.

(Projectile/Rapier/Air-jet/Water-Jet)

8.

Knitting (in numbers of machines)

9.

Woven Fabric Dyeing (in mtrs/month)

10. Knitted fabric Dyeing (in Kg./month)

PART I—SEC. 1]

THE GAZETTE OF INDIA, MARCH 12, 2016 (PHALGUNA 22, 1937)

315

1

2

3

4

11. Woven Fabric Printing (in mtrs/month)

12. Knitted fabric Printing (in mtrs/month)

13. Garmenting/made-ups (in nos. of pieces/month)

14. Technical Textiles (Pl. specify the end product)

a.

Woven b. Non-woven c. Knitted

15. Any other

Break-up of the project cost:

Items

In Rs.

Total cost

Basic price [i.e. excluding tax

component viz. sales tax/excise

duty/import duty, etc.]

Land

Factory buildings

Preliminary and pre-operative expenses

Margin money for working capital

Main plant and machinery

Other fixed investments

Total

EXPENDITURE INCURRED BEFORE THE DATE OF SANCTION OF TERM LOAN.

Whether any expenditure incurred for the project before

sanction of term loan

Yes

No

If yes, details of expenditure incurred on the machinery/equipment before date of sanction of the term loan

(Rs.)

Date

Machinery/equipment

[Details to be

furnished here in

conformity with the

information given in

format]

Total cost

(machine-

wise)

Basic/CIF

price

(machine-

wise)

[i.e.

excluding

tax

component

viz. sales

tax/excise

duty/import

duty, etc.]

Amount

incurred

(machine-

wise)

Whether

machine-

wise

payment

made

[Please

mention

`Yes’ or

`No’]

Source of

funds

Imported

Indigenous

1

2

3

4

5

6

7

8

Total (I)

316

THE GAZETTE OF INDIA, MARCH 12, 2016 (PHALGUNA 22, 1937)

[PART I—SEC. 1

Total expenditure incurred on the project before date of sanction of the term loan : Rs.________ .

FORMAT-1 (Continued)

PART–IV

Certified that:

1. The information furnished in PART–I, PART–II and PART III of FORMAT - 1 is true and correct and furnished

based on the documentary evidences available with the unit, which may be verified by the designated authorities at

any point of time.

2. I/we hereby certify that the unit/firm is eligible for claiming the subsidy under the scheme within the overall ceiling

fixed for the respective category.

3. I/We _____________ (Name of the beneficiary unit) hereby certify that no machinery or any part thereof, for which

benefits are being claimed/taken under TUFS (includes TUFS, MTUFS, RTUFS and RRTUFS), has been loan

funded more than once from this bank and any other banks/Lending Agencies/Financial Institutions. A copy of duly

signed certificate (in specified format) is uploaded which will be produced to JIT in original at the time of claiming

subsidy.

4. I/we hereby undertake that the subsidy availed for the stated purpose will be utilized only for installation of the

benchmarked technology as mentioned in the Government Resolution on ATUFS. In case of any variation found

during the verification of the documents and assets of the company/unit, or at any later stage, the benefits availed

under ATUFS will be returned to bank(s)/Government with the applicable penal interest from the date of its receipt.

5. I/We shall own responsibility for omissions/misrepresentations, if any, in the above information. In case of any

variation in the above furnished information, I/we hereby undertake to inform the same to the bank/Government.

6. It is certified that I/We ------------------have been pre-authorized for an amount of Rs.---------------- under RR-TUFS

& A TUFS and as on date of filling this application under ATUFS and an amount of Rs.------------------ has been

received as subsidy under RR-TUFS & A TUFS.

7. I/We -----------------------undertake that the unit shall be operational for a minimum period of three years and the

minimum re-payment period including moratorium period of this term loan is three years.

Place:

(Signature)

Date :

(Name and designation of the authorised signatory)

Note :

Please affix seal/rubber stamp of the Company/Unit along with signature of the authorized signatory.

Fill in all the Items with specific details.

FORMAT- 2

Certificate by the Lending Agency

[Please tick ( √ ) the correct option wherever applicable]

(To be filled in by the Branch of the Lending Agency)

1.

Whether information furnished by the applicant in

FORMAT- 1 is correct and verified from the

documents

Yes

No

2.

Date of receipt of the term loan application by the

Bank/Institution

_____/_____/_____

(dd/mm/yyyy)

3.

Date of sanction of the term loan by the delegated

authority (Board/Credit Committee, etc.)

_____/_____/_____

(dd/mm/yyyy)

4.

Date of communication of sanction to the

company/firm

_____/_____/_____

(dd/mm/yyyy)

5.

a. Total Term Loan Sanctioned

Rs. _______________

b. Promoter’s Contribution

Rs._________ ; ___% of the project cost

PART I—SEC. 1]

THE GAZETTE OF INDIA, MARCH 12, 2016 (PHALGUNA 22, 1937)

317

6.

Projected Date of completion of the project

_____/_____/_____

(dd/mm/yyyy)

7.

Implementation period

______ years ______ months

8.

Date of first disbursement

_____/_____/_____

(dd/mm/yyyy)

9.

a.

Repayment start date

_____/_____/_____

(dd/mm/yyyy)

b.

Repayment end date

_____/_____/_____

(dd/mm/yyyy)

c.

Repayment period

[i.e. Item No. 9b minus Item No. 9a]

________ years _______ months

10

Account Number of Term Loan

11

a. Whether the term loan is being shared by other

Bank(s)/Institution(s)?

Yes

No

b. If yes, indicate sharing pattern

Name of the

Bank/Institution

Amount (Rs.)

Total

c. In case of consortium financing, which is the lead

bank?

Certified that:

The information furnished in by the applicant in PART–I, PART–II and Part III of FORMAT - 1 is found correct on the basis

of records available with our bank.

It is also certified that the minimum re-payment period including moratorium period of this term loan is three years.

Place:

(Signature)

Date :

(Name and designation of the authorised signatory)

FORMAT - 3

FORMAT FOR CHECK LIST FOR ISSUANCE OF UID BY OFFICE OF THE TEXTILE COMMISSIONER (Sl. No. 1 to

20 are System generated)

1.

i) Status of the Application

ii) Date and Time of Deficient

iii) Reason for making deficient by TxC

(System generated)

2.

i) Re-submission date (Date and Time) (auto created while

UID application submitted by the Lending Agency)

ii) Compliances by the Nodal Agency- comments

(System generated)

318

THE GAZETTE OF INDIA, MARCH 12, 2016 (PHALGUNA 22, 1937)

[PART I—SEC. 1

3.

Approval date (Date and Time) (auto created while UID

application submitted by the Lending Agency)

(System generated)

4.

Approval/Waitlist No

(System generated)

5.

Name & Address of the unit

(System generated)

6.

e-mail ID of the unit

(System generated)

7.

PAN number

(System generated)

8.

Date of sanction of term loan

(System generated)

9.

Project cost in Rs.

(System generated)

10.

Segment claimed

(System generated)

12.

Expected date of completion of project

(System generated)

13.

Bank name and address, Branch Code

(System generated)

14.

Term loan Sanctioned in Rs.

(System generated)

15

Promoter’s Contribution in Rs.

(System generated)

16.

Term Loan account number

(System generated)

17.

Basic Cost of eligible machines in Rs.

(System generated)

18.

Subsidy value entitled on eligible machines in Rs.

(System generated)

19.

TUFS Subsidy Pre-authorised and availed under RRTUFS

(System generated)

20.

Total pre-authorised subsidy under ATUFS in Rs.

(System generated)

21.

Whether there is identical application having same PAN

and same term loan sanctioned in online system (auto)

Yes No

22.

Whether application is submitted within six months from

the date of sanction of term loan

Yes No

23.

Whether selected segment is correct

Yes No

24.

Whether required type of subsidy is correct

Yes No

25.

Whether subsidy indicated is correct

Yes No

26.

Whether segment & machines matching with DPR

(Executive Summary, Cost of Project & Mean of Finance)

Yes No

27.

Whether copy of PAN found attached & matching with

PAN details in application

Yes No

28.

Whether “No Multiple Finance Certificate” is attached by

the applicant

Yes No

29.

Application checked by

Name & Designation

Date & Time

30.

Application verified by

Name & Designation

Date & Time

PART I—SEC. 1]

THE GAZETTE OF INDIA, MARCH 12, 2016 (PHALGUNA 22, 1937)

319

FORMAT–4

FORMAT FOR SUBMISSION OF REQUEST FOR CONDUCTING JOINT INSPECTION FOR THE INSTALLED

MACHINES BY APPLICANT UNDER A TUFS

1.

TUFS Reference Number

(auto generated from system)

2.

UID No. & date

(auto generated from system)

3

Unit’s company registration details or registration details

with appropriate authority

Please upload a copy

4

Copy of recent electricity bill

Please upload a copy

5

Partnership deed in case of partnership firm

Please upload a copy

6

Lease deed/property documents for

proprietor/partnership/co-operative firm

Please upload a copy

7

Date-wise actual disbursement of term Loan

(Please also upload bank’s certified statement)

8

Bank’s Statement for Margin Money and Term Loan

Please upload a copy

9

Copy(ies) of Machine(s) commercial Invoice(s) .( Unit

have to mention Invoice No & date in i-ATUFS and also

upload the same.)

Name of

Machine

ry

Projecte

d While

obtainin

g UID

Num

bers

Project

ed

Basic

cost in

Rs.

Actual

machi

nery

Purcha

sed &

Install

ed

Actual

nos.

Actual

Basic

cost in

Rs. as

per

Commer

cial

Invoice

Name

of Mfr

Year

of

Mfr

Com

merci

al

Invoi

ce no.

Bill

of

Entry

Count

ry of

Origin

i.

ii

iii

iv

v

10

Justification for Change of Machinery (in case Actual

Machine varies from Projected machine)

11

Bill of entry number and date (in case of imported

machine(s)

Please also upload a copy(ies)

12

TR-6 Challans (for custom duty paid) (in case of imported

machine(s)

Please also upload a copy(ies)

13

Country of Origin duly certified by bank (in case of

imported machine(s)

Please also upload a copy(ies)

14

Bill of lading number & date (in case of imported

machine(s)

Please also upload a copy(ies)

15

LC certified by bank (in case of imported machine(s)

Please also upload a copy(ies)

16

Debit advice certified by bank (in case of imported

machine(s)

Please also upload a copy(ies)

17

Swift/Telegraphic transfer receipt certified by bank (in case

of imported machine(s)

Please also upload a copy(ies)

18.

Date of completion of installation of all machines covered

under UID obtained:

320

THE GAZETTE OF INDIA, MARCH 12, 2016 (PHALGUNA 22, 1937)

[PART I—SEC. 1

19.

Date of submission of request by the TUFS applicant

(auto generated from system)

20.

Actual employment generated

Total:

i. Men:

ii. Women

i.

ii

iii. SC, ST

iv Minority

iii iv

Note: All the documents related to banking operation should be endorsed by the concerned bank from where term loan is

availed.

Certified that:

The information furnished in this format is true and correct and furnished based on the documentary evidences

available with the unit, which may be verified by the designated officers at any point of time.

Place:

(Signature)

Date :

(Name and designation of the authorised signatory)

Note : Please affix seal/rubber stamp of the Company/Unit along with signature of the authorized signatory.

Fill in all the Items with specific details.

FORMAT–5

Declaration to be furnished by the unit at the time of JIT

(On unit’s letterhead )

8. It is certified that I/We ------------------has been pre-authorized for an amount of Rs.---------------- under RR-TUFS &

ATUFS and as on date of filling the application under ATUFS and an amount of Rs.------------------ has been received as

subsidy under RR-TUFS & ATUFS.

9. I/We _____________ (Name of the beneficiary unit) hereby certify that no machinery or any part thereof, for which

benefits are being claimed/taken under TUFS, has been funded more than once from this bank and any other

banks/Lending Agencies/Financial Institutions. A copy of duly signed certificate (in specified format as Appendix-II) is

uploaded which will be produced to JIT in original at the time of claiming subsidy.

10. I/we hereby undertake that the subsidy availed for the stated purpose will be utilized only for installation of the

benchmarked technology as mentioned in the Government Resolution on ATUFS. In case of any variation found during

the verification of the documents and assets of the company/unit, or at any later stage, the benefits availed under

ATUFS will be returned to bank(s)/Government with the applicable penal interest from the date of its receipt.

11. I/We -----------------------undertake that the unit shall be operational for a minimum period of three years and the

minimum re-payment period including moratorium period of this term loan is three years.

(Signature)

Name and Designation of the Authorised signatory with Seal.

FORMAT–6

CERTIFICATION ON INSTALLATION AND COMMISSIONING OF MACHINERY UNDER ATUFS BY JOINT

INSPECTION TEAM (JIT)

1. Date of Receipt of Unit’s Application in.O/o.Tx.C:

2. UID No. and Date allotted by O/o.Tx.C:

3. Date of Inspection:

4.

Name & Address of the unit inspected

with pin code

Taluka/Tahasil/Mandal:

District:

State:

Pincode:

Phone No./Mobile No.

Fax No.

PART I—SEC. 1]

THE GAZETTE OF INDIA, MARCH 12, 2016 (PHALGUNA 22, 1937)

321

E-Mail ID

Unit PAN No.

SSI Reg./EM No. & Date

Name of Contact Person

Contact No.:

5.

Whether the unit found working on the

address mentioned in the UID

application.

Yes

No

If not, then actual address of the unit.

Taluka/Tahasil/Mandal:

District:

State:

Pincode:

6.

a)Whether details submitted in FORMAT

1 by the unit and certified by the bank are

found correct or not

Yes

No

b) If not please specify

c) Whether Declaration in FORMAT 5 is

obtained from the unit and attached

Yes

No

7.

Segment

8

a. Whether all machines indicated in

FORMAT 4 are found installed and are

eligible under A TUFS

Yes

No

b. If not please specify

9

a. Whether MIC code allotted by the TxC

is found on all machines indicated in

FORMAT 4

Yes

No

b. If not please specify

10.

Total cost of eligible benchmarked

machinery under ATUFS

Promoter’s Contribution

Loan Disbursed

Rs.__________

Rs.__________(_____%)

Rs.__________(_____%)

Machines installed/commissioned under

ATUFS

(Machine details to be furnished as per

given Appendix)

15%/10%

Whether JIT recommends for release of

subsidy

Yes/No

If yes, then eligible investment

Rs.___________

If No, reason thereof

11.

Eligible subsidy amount (CIS )

Rs. ___________

12.

Employment

Signature of the Owner/

Authorized Person of the Unit with seal

(JIT Members Name & Designation and signatures)

322

THE GAZETTE OF INDIA, MARCH 12, 2016 (PHALGUNA 22, 1937)

[PART I—SEC. 1

Appendix to FORMAT–6

Certification on Installation and Commissioning of Machinery under ATUFS

MACHINE WISE PARTICULARS & DETAILS

Machine Type

Machine reference sr. no as per ATUFS

Annexure

Imported or Indigenous

Number of Machines

Name & Address of the machinery

Manufacturer

Date of commissioning of the machine(s)

Make

Model

Year of Manufacture

Machine sr. no

Specification of the Machine

Country of Origin

(in case of Imported)

Exporting Country

(in case of Imported)

Commercial Invoice No. & Date and Price

of Machinery

(Copies enclosed)

Bill of Lading Number & Date

(Copies enclosed)

Bill of Entry Number & Date

(Copies enclosed)

Online Verification of Bill of Entry in E

commerce portal (icegate)

Details of Payment made

(Copies enclosed)

Mode of Payment

(LC/SWIFT/TT/CAD/RTGS/NEFT

CHEQUE/DD/PO etc)

Amount & Date of payment

Attach photographs duly signed & stamped

by JIT and applicant displaying the installed

machinery claimed under the project.

Whether the machine(s) is/are

installed/commissioned as per the

specifications mentioned in the commercial

invoice

Yes

No

Remarks of JIT if any

(JIT Members Name & Designation and signatures)

(Sign of company/firm)

PART I—SEC. 1]

THE GAZETTE OF INDIA, MARCH 12, 2016 (PHALGUNA 22, 1937)

323

FORMAT–7

FORMAT FOR PROCESSING CLAIMS

Date of Receipt of Unit’s Application in O/o.Tx.C:

UID No. and Date allotted by O/o.Tx.C:

Date of Inspection by JIT:

1

Name & Address of the unit inspected

with pin code

Taluka/Tahasil/Mandal:

District:

State:

Pincode:

Phone No./Mobile No.

Fax No.

E-Mail ID

Unit PAN No.

SSI Reg./EM No. & Date

Name of Contact Person

Contact No.:

2

Date of physical verification by JIT

_____/_____/_____

(dd / mm / yyyy)

3

Date of uploading of JIT report in the

online system.

_____/_____/_____

(dd / mm / yyyy)

4

a) Whether all other details submitted by

the unit and certified by the bank are

found correct or not by JIT

Yes

No

b) If not please specify

c) Whether the deviation

resolved/justified.

Yes

No

5

a. Whether all machines indicated in

FORMAT 4 are found installed and

declared eligible under A TUFS by JIT

Yes

No

b. If not please specify

6

a. Whether MIC code allotted by the TxC

is found on all machines indicated in

FORMAT 4 by JIT

Yes

No

b. If not please specify

7

Total cost of machinery found eligible

under ATUFS as per JIT.

Amount of subsidy to be released @ 15%

or 10%

Rs.

Rs.

8

Technical Officer

Assistant Director

Deputy Director

Director

JTxC/ATxC

TxC

324

THE GAZETTE OF INDIA, MARCH 12, 2016 (PHALGUNA 22, 1937)

[PART I—SEC. 1

FORMAT–8

FORMAT FOR RELEASING CLAIMS

Date of approval of Textile Commissioner (competent authority)

Date of submission of Challan to MoT

Date of approval of JS/AS (TUFS)–MoT

Date of Approval of IFW-MoT

Date of approval of competent authority

Date of sending bills to PAO (Textiles)

Date of credit into the beneficiary account/Bank

FORMAT–9

Part I (To be submitted by beneficiary)

CANCELLATION OF ISSUED UID UNDER ATUFS THROUGH CONCERNED LENDING AGENCY

1.

UID Number

Auto generated

2.

UID Approval date

Auto generated

3.

Name of the unit

Auto generated

4.

Address of the unit

Auto generated

5.

e-mail ID of the unit

Auto generated

6.

PAN number

Auto generated

7.

Date of sanction of term loan

Auto generated

8.

Project cost in Rs.

Auto generated

9.

Segment claimed

Auto generated

10.

Lending Agency name

Auto generated

11.

Lending Agency address

Auto generated

12.

Lending Agency Branch Code

Auto generated

13.

Term loan Sanctioned in Rs.

Auto generated

14.

Promoter’s Contribution in Rs.

Auto generated

15.

Term Loan account number

Auto generated

16.

Total Subsidy value pre authorized as per UID in Rs.

Auto generated

17.

Reason for Cancellation of issued UID

Certified that:

The information furnished in this format is true & correct and I/We ------- request the cancellation of the aforesaid

UID issued by Office of the Textile Commissioner. Further I/We ------------- shall not claim any subsidy full or in

part thereof with respect to the aforesaid UID issued by Office of the Textile Commissioner, at any time.

Place:

(Signature)

Date :

(Name and designation of the authorised signatory)

Note : Please affix seal/rubber stamp of the Company/Unit along with signature of the authorized signatory.

PART I—SEC. 1]

THE GAZETTE OF INDIA, MARCH 12, 2016 (PHALGUNA 22, 1937)

325

FORMAT–9 (Continued)

Part II (To be submitted by Lending Agency)

CANCELLATION OF ISSUED UID UNDER ATUFS THROUGH CONCERNED LENDING AGENCY

Certified that:

The information furnished in by the applicant in PART–I of FORMAT - 8 is found correct on the basis of records available

with our bank.

In view of reasons submitted by the applicant unit in the Part I of Format 8, I/We ------------- hereby recommend for the

Cancellation of UID number issued by Office of the Textile Commissioner to the applicant unit.

Place:

Signature)

Date :

(Name and designation of the authorised signatory with seal)

FORMAT - 10

FORMAT FOR ONLINE GRIEVANCE RELATED TO IMPLEMENTATION OF ATUFS

i.

Grievance No (Auto generated)

ii.

Grievance date (Auto generated)

iii.

Name of the applicant unit

iv.

Address of the applicant unit

v.

Tel. No

vi.

Fax No

vii.

E-mail ID

viii.

Name of the contact officer

ix.

Designation of the contact officer

x.

Mobile No.

xi.

Fax No.

xii.

E-mail ID

xiii.

Name of the lending Agency

xiv.

Address of the lending Agency

xv.

UID Number

xvi.

Date of issue of UID

xvii.

Term loan Amount

xviii.

Segment

xix.

Details of Grievance related to implementation of A-TUFS

xx.

Additional details, if any

xxi.

Copies of supporting documents

Please upload a scanned copy

Place:

Date :

(Name and designation of the authorised signatory)

326

THE GAZETTE OF INDIA, MARCH 12, 2016 (PHALGUNA 22, 1937)

[PART I—SEC. 1

FORMAT - 11

FORMAT FOR ONLINE GREVIENCE RELATED TO POLICY MATTERS AND INTERPRETATION THEREOF

UNDER ATUFS

i.

Grievance No (Auto generated)

ii.

Grievance date (Auto generated)

iii.

Name of the applicant unit

iv.

Address of the applicant unit

v.

Tel. No

vi.

Fax No

vii.

E-mail ID

viii.

Name of the contact officer

ix.

Designation of the contact officer

x.

Mobile No.

xi.

Fax No.

xii.

E-mail ID

xiii.

Name of the lending Agency

xiv.

Address of the lending Agency

xv.

UID Number

xvi.

Date of issue of UID

xvii.

Term loan Amount

xviii.

Segment

xix.

Details of Grievance related to Policy matters and

interpretation thereof under ATUFS

xx.

Additional details, if any

xxi.

Copies of supporting documents

Please upload a scanned copy

Place:

Date :

(Name and designation of the authorised signatory)

MINISTRY OF HUMAN RESOURCE DEVELOPMENT

(DEPARTMENT OF HIGHER EDUCATION)

New Delhi, the 24th November 2015

RESOLUTION

F.No-8-1/2015-Skt.II—In continuation of this Ministry’s Resolution of even number dated 27.08.2015

reconstituting the Rashtriya Sanskrit Parishad by the Ministry of Human Resource Development, Deptt. of Higher Education,

Govt. of India, it has been decided with the approval of Chairperson of the Parishad & Hon’ble Minister of Human Resource

Development, to amend the composition of the Parishad to co-opt Chancellor, Rashtriya Sanskrit Vidyapeetha, Tirupati under

the category of Ex-officio members. It has also been decided that Chairperson of the Parishad may invite any other Sanskrit

Scholar in the meetings of the Parishad as Special Invitees.

2. Accordingly, Shri N. Gopalaswami, Chancellor, Rashtriya Sanskrit Vidyapeetha, Tirupati has been co-opted as

Ex-officio member and Shri Chamu Krishna Shastry, Sr. Consultant (Languages), MHRD has been nominated in Rashtriya

Sanskrit Parishad as Special Invitee.

3. This order will come into force with immediate effect.

SUKHBIR SINGH SANDHU

Joint Secy.

PART I—SEC. 1]

THE GAZETTE OF INDIA, MARCH 12, 2016 (PHALGUNA 22, 1937)

327

New Delhi, the 22nd February 2016

RESOLUTION

No. F.4-3/2015-U.3—Whereas the Council of Indian Council of Philosophical Research (ICPR) was last constituted

on 15th October 2012 and the term of the Council having expired on 14th October 2015, the Government of India has resolved

to re-constitute the Indian Council of Philosophical Research (ICPR) under Rule 3 of the Memorandum of Association and

Rules of the ICPR. The tenure of members is for a period of three years from the date of issue of resolution except for

Chairman and Member Secretary in whose case the tenure is mentioned below. The Council with following members is

constituted with immediate effect:-

A. Chairman

-

Prof. S.R. Bhatt (For three years from assumption of the charge on 20th October 2015)

B. Eight representatives of different organisations:-

i.

A representative of the University Grants Commission;

ii.

Two representatives of the Indian Philosophical Congress;

iii.

A representative of the Indian Council of Social Science Research;

iv.

A representative of the Indian Council of Historical Research;

v.

A representative of the Nation Science Academy;

vi.

A representative of the Deptt. of Higher Education, Ministry of Human Resource Development.

vii.

Financial Advisor, Deptt. of Higher Education, Ministry of Human Resource Development.

C. Twelve members nominated by the Government of India:

i.

Prof. Kusum Jain, Former Professor & Head Department of Philosophy, Rajasthan University

ii.

Prof. Jatashankar Tiwari, Former Professor & Head Department of Philosophy, Allahabad University.

iii.

Prof. X.P. Mao, Professor of Philosophy, North Eastern Hill University

iv.

Dr. K. Arvinda Rao, Director Advaita Academy, Hyderabad

v.

Prof. S.R. Leela, Former Professor & Head Department of Sanskrit, Bangalore University

vi.

Prof. V. Kutumba Sastri, Former Vice-Chancellor, Somnath Sanskrit University

vii.

Prof. R.C. Sinha, Former Professor & Head Department of Philosophy, Patna University.

viii. Prof. Dharmanand Sharma, Former Professor & Head Department of Philosophy, Chandigarh University

ix.

Prof. Naresh Kumar Ambastha, HOD, Department of Philosophy, PKRM College, Dhanbad.

x.

Prof. Hare Ram Tripathi, Professor, Shri Lal Bahadur Shastri Rashtriya Sanskrit Vidyapeetha (Deemed

University), Delhi.

xi.

Prof. Om Prakash Pandey, Former Head of the Dept. of Sanskrit and Prakrit Languages, Lucknow University

xii.

Dr. Rajaram Shukla, Professor Vaidic Darshan, BHU Varanasi.

D. Four imminent philosophers to be co-opted by Council.

E. Two representatives of Government of Uttar Pradesh; and

F. Prof. Manendra Pratap Singh, Member Secretary, ICPR. (He was appointed as Member Secretary of the ICPR for a

period of three years w.e.f. 18.11.2013).

ORDER

It is hereby ordered that the Resolution be published in the Gazette of India for general information.

PRAVEEN KUMAR

Jt. Secy.

zeqæ.k funs'kky; }kjk] Hkkjr ljdkj eqæ.kky;] ,u-vkbZ-Vh- Qjhnkckn esa

viyksM

,oa

çdk'ku

fu;a=d]

fnYyh

}kjk

bZ&çdkf'kr]

2016

UPLOADED

BY

DIRECTORATE

OF

PRINTING

AT

GOVERNMENT

OF

INDIA

PRESS,

N.I.T.

FARIDABAD

AND

E-PUBLISHED

BY

THE

CONTROLLER

OF

PUBLICATIONS,

DELHI, 2016

www.dop.nic.in

DOPGIPF—[PART I—SEC.1]