8140 DG/2025

(1)

रजजस्ट्री सं. डी.एल.- 33002/99 REGD. No. D. L.-33002/99

xxxGIDHxxx

xxxGIDExxx

असाधारण

EXTRAORDINARY

प्राजधकार से प्रकाजित

PUBLISHED BY AUTHORITY

भाग IV

PART IV

राष्ट्रीय राजधानी राज्य क्षेत्र ददल्ली सरकार

GOVERNMENT OF THE NATIONAL CAPITAL TERRITORY OF DELHI

श्रम जिभाग

ददल्ली, 3 ददसम् बर, 2025

F.27(118)/CIF/Lab/2021/1089.—व्यािसाजयक सुरक्षा, स्ट्िास्ट््य और कायय जस्ट्थजत संजिता, 2020 की

धारा 133 और 135 द्वारा प्रदत्त िजियों का प्रयोग करते हुए और भारत सरकार के गृि मंत्रालय के एस.ओ. 272(ई)

ददनांक 16.01.2023 द्वारा और (i) ददल्ली कारखाना जनयम, 1950, (ii) ददल्ली भिन एिं अन्य सजिमायण कमयकार

(रोजगार एिं सेिा ितय जिजनयमन) जनयम, 2002 और (iii) ददल्ली ठेका श्रम (जिजनयमन एिं उन्मूलन) जनयम, 1972 के

स्ट्थान पर, उन बातों को छोड़कर जो ऐसे अजधक्रमण से पूिय की गई िैं या करने से चूक गई िैं, उि संजिता की धारा 133

और 135 के अनुसार अजधसूजचत की जाती िैं। इससे प्रभाजित िोने िाले संभाजित व्यजियों की जानकारी के जलए, राष्ट्रीय

राजधानी क्षेत्र ददल्ली के उपराज्यपाल जनम्नजलजखत जनयम बनाने का प्रस्ट्ताि करते िैं, अथायत ददल्ली व्यािसाजयक सुरक्षा,

स्ट्िास्ट््य और कायय ितें जनयम, 2025, और जजन्िें धारा 137 की उपधारा 1(ए) के अनुसार, इससे प्रभाजित िोने िाले

संभाजित सभी व्यजियों की जानकारी के जलए अजधसूजचत दकया जाता िै।

सं. 377]

ददल्ली, बुधिार, ददसम् बर 3, 2025/अग्रिायण 12, 1947

[रा.रा.रा.क्षे.दद. सं. 364

No. 377]

DELHI, WEDNESDAY, DECEMBER 3, 2025/AGRAHAYANA 12, 1947 [N. C. T. D. No. 364

भारत सरकार

GOVERNMENT OF INDIA

एस.जी.-डी.एल.-अ.-17122025-268575

SG-DL-E-17122025-268575

2

DELHI GAZETTE : EXTRAORDINARY

PART IV]

इसके द्वारा सूचित ककया जाता है कक चियमों के प्रारूप पर इस अचिसूििा के राजपत्र में प्रकाशि की चतचि से पैंतालीस कििों

की अवचि समाप्त होिे के बाि चविार ककया जाएगा, साि ही आपचियाां और सुझाव, यकि कोई हों, श्रम चवभाग, सी ब्लॉक,

5, शाम िाि मागग, किल्ली - 110054 और/या ईमेल यािी [email protected] पर भेजे जा सकते हैं। आपचियाां और

सुझाव प्रोफामाग में भेजे जािे िाचहए चजसमें कॉलम (i) में व्यचि/सांगठि का िाम और पता चिर्िगष्ट ककया गया हो और कॉलम

(ii) में सांशोचित ककए जािे वाले प्रस्ताचवत चियम या उप-चियम को चिर्िगष्ट ककया गया हो और कॉलम (iii) में प्रचतस्िाचपत

ककए जािे वाले प्रस्ताचवत सांशोचित चियम और उप-चियम और उसके कारणों को चिर्िगष्ट ककया गया हो। उि प्रारूप

अचिसूििा के सांबांि में ककसी भी व्यचि या सांगठि से ऊपर चिर्िगष्ट अवचि की समाचप्त से पहले प्राप्त होिे वाली आपचियों और

सुझावों पर राष्ट्रीय राजिािी क्षेत्र किल्ली सरकार द्वारा चविार ककया जाएगा।

अध्याय-I

प्रारंभिक

1 संभिप्त नाम, भिस्तार और प्रारंि होने की तारीख -

इन ननयमों को "निल्‍ली व्यावसानयक सुरक्षा, स्वास््य और कायय नस्िनि ननयम, 2025" कहा जा सकिा है।

(1) ये संपूर्य राष्ट्रीय राजधानी क्षेत्र निल्ली (नजसे आगे निल्ली कहा जाएगा) पर लागू होंगे।

(2) ये आनधकाररक राजपत्र में प्रकाशन की निनि से लागू होंगे।

2 पररिाषाएँ -

1. इन ननयमों में, जब िक नक संिर्य से अन्यिा अपेनक्षि न हो, -

(क) "पररनशष्ट" का अिय इन ननयमों से संलग्न पररनशष्ट है;

(ख) "संनहिा" का अिय व्यावसानयक सुरक्षा, स्वास््य और कायय नस्िनि संनहिा, 2020 (केंद्रीय अनधननयम संख्या 37, 2020) है;

(ग) सक्षम व्यचि: - मुख्य ननरीक्षक-सह-सुनवधाप्रिािा अनुसूची-क में ननधायररि आवश्यकिाओं के अनुसार नकसी र्ी व्यनि या संगठन को "सक्षम व्यनि" के रूप में मान्यिा

िे सकिा है।

(घ) "ननरंिर प्रनिया” का अिय है सूखी हुई सामग्री या िरल पिािय जो संसानधि हो रहे हैं और ननरंिर गनिमान हैं, रासायननक प्रनिनिया से गुजर रहे हैं और

यांनत्रक या िाप उपचार या सरकार द्वारा नननियष्ट नकसी अन्य प्रनिया के अधीन हैं;

(ङ) "कैलेंडर वर्य" का अिय है नकसी र्ी वर्य में 1 जनवरी से शुरू होने वाली बारह महीनों की अवनध;

(च) "निल्ली" का अिय है राष्ट्रीय राजधानी क्षेत्र निल्ली।

(छ) "प्रपत्र" का अिय इन ननयमों से संलग्न प्रपत्र है;

(ज) "सरकार" का अिय संनवधान के अनुच्छेि 239 कक के खंड (1) के अंिगयि नननियष्ट उपराज्यपाल है;

(झ) "खिरनाक अपनशष्ट" का अिय समय-समय पर संशोनधि खिरनाक और अन्य अपनशष्ट (प्रबंधन एवं सीमापार संचलन) ननयम, 2016 के ननयम 3 के उप-ननयम (1) के

खंड (17) में पररर्ानर्ि खिरनाक अपनशष्ट है;

(ञ) "खिरनाक पिािय" का अिय खिरनाक रसायनों के नवननमायर्, र्ंडारर् और आयाि ननयम, 1989 के ननयम 2(ङ) में पररर्ानर्ि रसायन या कोई अन्य ऐसा पिािय है नजसे

सरकार या केंद्र सरकार समय-समय पर अनधसूनचि करे;

(ट) "लाइसेंनसंग प्रानधकरर्" का अिय धारा 119 की उप-धारा (1) के अंिगयि अनधसूचना द्वारा सरकार द्वारा ननयुि प्रानधकरर् है;

(ठ) "बडी िुघयटना" का अिय है - प्रनिष्ठान के अंिर या बाहर जानमाल की हानन, या अंिर िस या अनधक क्षनि और/या बाहर एक या अनधक क्षनि या नवर्ाि रसायनों का

ररसाव या नवस्फोट या आग या खिरनाक रसायनों का ररसाव नजसके पररर्ामस्वरूप साइट पर या साइट के बाहर आपाि नस्िनि पैिा हो या उपकरर् को नुकसान हो, नजससे

प्रनिया रुक जाए या पयायवरर् पर प्रनिकूल प्रर्ाव पडे;

(ड) "प्रमुख िुघयटना जोनखम (एमएएच) प्रनिष्ठान" का अिय है खिरनाक रसायनों के ननमायर्, र्ंडारर् और आयाि ननयम, 1989 के ननयम 2(ञ)क) में पररर्ानर्ि कारखाना;

(ढ) "पोटयल" का अिय है सरकार की वेबसाइट जो संनहिा और उसके अंिगयि बनाए गए ननयमों के अंिगयि सेवाएँ प्रिान करिी है;

(र्) "मान्यिा प्राप्त नवश्वनवद्यालय या संस्िान" का अिय है, -

क. केंद्र या नकसी राज्य सरकार द्वारा नवनध द्वारा ननगनमि कोई अन्य नवश्वनवद्यालय या संस्िान;

[PART IV

DELHI GAZETTE : EXTRAORDINARY

3

या

ख. नवश्वनवद्यालय अनुिान आयोग द्वारा मान्यिा प्राप्त कोई अन्य नवश्वनवद्यालय या संस्िान;

(ि) "पंजीकरर् अनधकारी" का अिय है कारखाने के प्रयोजन के नलए मुख्य ननरीक्षक-सह-सुनवधाकिाय और

अन्य प्रनिष्ठानों के प्रयोजन के नलए संबंनधि क्षेत्रानधकार के संयुि/उप श्रम आयुि।

3

धारा 2 की उपधारा (1) के खंड (एक्‍स) के अंतर्गत आभितों की आय और आय के स्रोत: -

श्रम नवर्ाग, सरकार, सामान्य या नवशेर् आिेशों द्वारा, आय मानिंड नननियष्ट कर सकिी है और आनश्रिों को "पररवार" की पररर्ार्ा में शानमल न करने के नलए आय के स्रोिों

को पररर्ानर्ि कर सकिी है।

अध्याय-2

पंजीकरण

4

धारा (3) की उपधारा (2) के अंतर्गत प्रभतष्ठान का पंजीकरण: -

(1) पोटयल पर फॉमय-01 में पंजीकरर् अनधकारी को आवेिन प्रस्िुि करना होगा, नजसमें प्रनिष्ठान के बारे में नवस्िृि जानकारी िेनी होगी, और फॉमय में नननियष्ट प्रनिष्ठान के

पंजीकरर् से संबंनधि िस्िावेज़, ननयोिा(ओं) के पहचान प्रमार् और पिे के साि-साि नीचे िी गई अनुसूची के अनुसार अपेनक्षि शुल्क र्ी अपलोड करना होगा। फॉमय पर

नडनजटल रूप से या पोटयल पर आवश्यकिानुसार नकसी अन्य िरीके से हस्िाक्षर नकए जाएँगे। आवेिन में िी गई सर्ी सूचनाओं की सत्यिा के नलए आवेिक स्वयं उत्तरिायी

होगा।

शुल्क अनुसूची (प्रभतष्ठान के भिए)

भनयोभजत भकए जाने िािे कमगचाररयों की संख्या

पंजीकरण शुल्क

50 तक

2000

51-100

3000

101-200

5000

201-500

7000

500-1000

10000

1000 से ऊपर

15000

(2) पंजीकरर् प्रमार्पत्र पंजीकरर् अनधकारी द्वारा इलेक्ट्रॉननक रूप से जारी नकया जाएगा।

(3) उप-ननयम 1 में नननियष्ट प्रत्येक आवेिन के साि प्रपत्र-02 में अंिरराज्यीय प्रवासी श्रनमक की जानकारी संलग्न होगी।

(4) यनि पंजीकरर् के नलए आवेिन संनहिा के लागू होने के 60 निनों के र्ीिर नहीं नकया जािा है,

नजस पर संनहिा के प्रावधान लागू होिे हैं, िो उप-ननयम 1 के अंिगयि अनुसूची में नननियष्ट शुल्क का पच्चीस प्रनिशि वानर्यक नवलंब शुल्क नलया जाएगा।

(5) यनि पंजीकरर् के बाि प्रनिष्ठान में ननयोनजि नकए जाने वाले कमयचाररयों की संख्या में कोई वृनि होिी है, िो उप-ननयम 1 में उनल्लनखि अनुसूची के अनुसार अंिर रानश

संबंनधि ननयोिा द्वारा िेय होगी।

(6) पोटयल पर प्रपत्र-03 में पंजीकृि प्रनिष्ठान का एक रनजस्टर रखा जाएगा।

5 धारा 4 के अंतर्गत अपीि:-

(1) जहाँ अपील का ज्ञापन सही हो, वहाँ अपील अनधकारी, जो अपर श्रम आयुि होगा, ऐसी अपील को स्वीकार करेगा, अनर्स्वीकृनि िेगा और स्वीकार नकए जाने की सूचना

िेगा, और

अपील को इलेक्ट्रॉननक रूप में पंजीकृि और अनुरनक्षि करेगा।

(2) अपील अनधकारी अपील की सूचना उस पंजीकरर् अनधकारी को र्ेजेगा, नजसके आिेश के नवरुि अपील की गई है और पंजीकरर् अनधकारी उसके बाि मामले के

अनर्लेखों को ऑनलाइन इलेक्ट्रॉननक रूप से अपील अनधकारी को र्ेजेगा।

(3) अपील अनधकारी अपीलकिाय को इलेक्ट्रॉननक रूप से एक सूचना र्ेजेगा नक वह उसके समक्ष अपील की सुनवाई के नलए सूचना में नननियष्ट निनि और समय पर उपनस्िि

हो।

(4) यनि सुनवाई के नलए ननयि निनि पर अपीलकिाय उपनस्िि नहीं होिा है, िो अपील अनधकारी अपील को एकपक्षीय रूप से खाररज कर सकिा है और अपीलकिाय को

इलेक्ट्रॉननक रूप से ऐसे ननर्य की सूचना िे सकिा है।

(5) जहाँ कोई अपील खाररज कर िी गई हो, वहाँ अपीलकिाय आिेश प्राप्त होने की निनि से िीस निनों के र्ीिर अपील की बहाली के नलए अपीलीय अनधकारी को इलेक्ट्रॉननक

4

DELHI GAZETTE : EXTRAORDINARY

PART IV]

रूप से आवेिन कर सकिा है और

यनि अपीलीय अनधकारी संिुष्ट हो जािा है नक अपीलकिाय को पयायप्त कारर् से उपनस्िि होने से रोका गया िा, िो अपीलीय अनधकारी अपील को बहाल कर िेगा।

(6) अपीलीय अनधकारी का आिेश अपीलकिाय और उस पंजीकरर् अनधकारी को इलेक्ट्रॉननक रूप से संप्रेनर्ि नकया जाएगा, नजसके आिेश के नवरुि अपील की गई है।

6 धारा 5 की उपधारा (1) के अंतर्गत पररचािन प्रारंि और समाभप्त की सूचना:

प्रत्येक प्रनिष्ठान, जो कारखाना हो या ठेका श्रनमकों या र्वन या अन्य ननमायर् कायों से संबंनधि हो, का ननयोिा पररचालन प्रारंर् या समानप्त के िीस निनों के पहले, पंजीकरर्

अनधकारी को प्रपत्र-04 इलेक्ट्रॉननक रूप से प्रस्िुि करेगा। पररचालन समानप्त की नस्िनि में, ऐसे प्रपत्र के साि एक प्रमार् पत्र संलग्न नकया जाएगा नक प्रनिष्ठान में काययरि श्रनमकों

को सर्ी िेय रानश का र्ुगिान कर निया गया है और पररसर को खिरनाक रसायनों और पिािों से मुि रखा गया है।

अध्याय-3

भनयोक्ता और कमगचाररयों आभि के कतगव्य

7 धारा 6 की उपधारा (1) के खंड (र्) के अंतर्गत कमगचाररयों की भचभकत्सा जाँच -

(1) कारखाने और र्वन या अन्य ननमायर् कायय का प्रत्येक ननयोिा, 45 वर्य की आयु पूरी कर चुके प्रत्येक कमयचारी के नलए, प्रत्येक कैलेंडर वर्य के प्रारंर् से 120 निनों के

र्ीिर, प्रनिवर्य ननिःशुल्क नचनकत्सा जाँच कराने की व्यवस्िा करेगा।

(2) व्यावसानयक सुरक्षा, स्वास््य और कायय नस्िनि (ओएसएच) संनहिा, 2020 की पहली अनुसूची के अंिगयि पररर्ानर्ि खिरनाक प्रनियाओं से जुडे उद्योग का प्रत्येक

ननयोिा, प्रत्येक कैलेंडर वर्य के प्रारंर् से 30 निनों के र्ीिर, प्रनिवर्य ननिःशुल्क नचनकत्सा जाँच कराने की व्यवस्िा करेगा।

(3) नचनकत्सा जाँच नीचे िी गई अनुसूची के अनुसार नकसी योग्य नचनकत्सक द्वारा की जाएगी। योग्य नचनकत्सक द्वारा नचनकत्सा प्रमार् पत्र संबंनधि ननयोिा और कमयचारी को

प्रस्िुि नकया जाएगा। नचनकत्सा जाँच का ररकॉडय, जब र्ी आवश्यक हो, ननरीक्षर् के नलए ननरीक्षक-सह-सुनवधाकिाय को उपलब्ध कराया जाएगा।

अनुसूची

सामान्‍य प्रभतष्‍ठान

रक्ट्‍ि

मूत्र

एक्ट्‍स-रे

खतरनाक प्रभिया

या खतरनाक पिार्थों और

खतरनाक अपभशष्ट से

भनपटने िािा प्रभतष्ठान

रक्ट्‍ि

मूत्र

एक्ट्‍स-रे

पीएफटी

िूक

ऑनडयोमेरी

(यनि

लागू हो)

नचनकत्सा ननरीक्षक सह

सुनवधाकिाय द्वारा

अनुशंनसि कोई अन्य

परीक्षर्

(4) नचनकत्सा परीक्षर् का ररकाडय प्ररूप-05 में रखा जाएगा ििा जब र्ी आवश्यक हो, ननरीक्षर् के नलए ननरीक्षक-सह-सुनवधाप्रिािा को उपलब्ध कराया जाएगा।

(5) यनि कोई अहयिाप्राप्त नचनकत्सा व्यवसायी नकसी ऐसे व्यनि की िेखर्ाल करिा है जो नकसी प्रनिष्ठान में ननयोनजि है या रहा है और िीसरी अनुसूची में नननियष्ट नकसी रोग से

पीनडि है, िो अहयिाप्राप्त नचनकत्सा व्यवसायी नबना नकसी नवलम्ब के मुख्य ननरीक्षक-सह-सुनवधाप्रिािा के कायायलय को नलनखि रूप में एक ररपोटय र्ेजेगा नजसमें यह बिाया

जाएगा नक-

(क) रोगी का नाम और पूरा डाक पिा,

(ख) वह रोग नजससे वह मानिा है नक रोगी पीनडि है, और

(ग) उस प्रनिष्ठान का नाम और पिा नजसमें रोगी काययरि है या अंनिम बार िा।

8 धारा 6 की उपधारा (1) के खंड (च) के अंतर्गत कमगचारी को भनयुभक्त पत्र -

नकसी र्ी कमयचारी को नकसी र्ी प्रनिष्ठान में िब िक ननयोनजि नहीं नकया जाएगा जब िक नक उसे प्रपत्र-06 में निए गए प्रोफामाय के अनुसार ननयुनि पत्र जारी न कर निया गया

हो:

परन्‍िु यह उपबंनधि है नक, नकसी वियमान कमयचारी को, नजसे अपेनक्षि नववरर् वाला ननयुनि पत्र जारी नहीं नकया गया है, इस ननयम के लागू होने के िीन महीने के र्ीिर ननयुनि

पत्र जारी नकया जाएगा।

9 धारा 10 की उपधारा (1) और धारा 11 के अधीन िुर्गटनाओं और खतरनाक र्टनाओं की सूचना;-

(1) जब नकसी प्रनिष्ठान में कोई िुघयटना घनटि होिी है नजसके पररर्ामस्वरूप नकसी व्यनि की मृत्यु हो जािी है या नजसके पररर्ामस्वरूप नकसी व्यनि को ऐसी शारीररक चोट

लगिी है नजससे उसकी मृत्यु होने की आशंका हो या नीचे िी गई अनुसूची में नननियष्ट कोई खिरनाक घटना, नजसके पररर्ामस्वरूप नकसी व्यनि की मृत्यु या शारीररक चोट न

पहुँचे, िो कारखाने का ननयोिा या प्रबंधक या प्रनिष्ठान का ननयोिा यिाशीघ्र इसकी सूचना ननरीक्षक-सह-सुनवधाकिाय और मुख्य ननरीक्षक-सह-सुनवधाकिाय को टेलीफोन,

नवशेर् संिेशवाहक या ईमेल द्वारा र्ेजेगा।

अनुसूची

इस ननयम के अंिगयि ननम्ननलनखि प्रकार की घटनाएँ खिरनाक मानी जाएँगी: -

(i) वायुमंडलीय िाब से अनधक िाब पर पेरोनलयम, र्ाप, संपीनडि वायु या अन्य पिािय युि नकसी संयंत्र, पाइपलाइन या उपकरर् का फटना;

[PART IV

DELHI GAZETTE : EXTRAORDINARY

5

(ii) व्यनियों या सामान को ऊपर उठाने या नीचे उिारने में प्रयुि िेन, डेररक, नवंच, होइस्ट या अन्य उपकरर्ों, या उसके नकसी र्ाग का नगरना या खराब होना, या िेन का

पलट जाना।

(iii) नवस्फोट, नवस्फोटकों के कारर् नवस्फोट, आग, हाननकारक नवर्ैली गैसों का ररसाव या ननकलना, नकसी नपघली हुई धािु या गमय द्रव या गैस का फटना, ररसाव या ररसाव

नजससे नकसी व्यनि को शारीररक चोट पहुँचिी है या नकसी कमरे या स्िान को नुकसान पहुँचिा है जहाँ व्यनि काययरि हैं;

(iv) र्ंडारर् के नलए प्रयुि नकसी ररसीवर या कंटेनर का वायुमंडलीय िाब से अनधक िाब पर नकसी गैस या गैसों (वायु सनहि) या नकसी द्रव या ठोस पिािय का गैस के

संपीडन के पररर्ामस्वरूप नवस्फोट होना।

(v) र्वन या ननमायर् सामग्री को संर्ालने के नलए नलन्टंग उपकरर्ों या होइस्ट या कन्वेयर या अन्य समान उपकरर्ों का नगरना या खराब होना या रस्सी, चेन या ढीले नगयर

का टूटना या खराब होना; र्वन या अन्य ननमायर् कायय में प्रयुि िेन का पलटना; ऊँचाई से वस्िुओं का नगरना;

(vi) नकसी िीवार, फशय, गैलरी, छि पुल, सुरंग, नचमनी, िीवार, र्वन का नगरना या नमट्टी या नकसी अन्य संरचना, प्लेटफॉमय, स्टेनजंग, मचान या फॉमयवकय सनहि नकसी र्ी

पहुँच मागय का धंसना; संपकय कायय, उत्खनन और रांसनमशन का नगरना;

(vii) खिरनाक पिािों का अचानक फैलना या ररसना और उनके कंटेनर को नुकसान होना;

(viii) प्रनिष्ठान के र्ीिर पररवहन उपकरर्ों का यकायक टूटना, पलटना, नगरना या टकराना;

(ix) नकसी उत्खनन, लोनडंग या पररवहन मशीनरी का ऊँचाई से नगरना;

(x) ज़मीन के नीचे काम करिे समय नकसी खंर्े, खंर्े के नकसी र्ाग या कोयले के कई खंर्ों का अचानक नगरना (अिायि, कोई धमाका);

(xi) ज़मीन के नीचे काम करिे समय चट्टान का फटना; खनन कायय के नकसी र्ी र्ाग का समय से पहले ढह जाना;

(xii) नकसी मशीन या उपकरर् के नकसी आवश्यक र्ाग का टूटना, फ्रैक्ट्चर होना या खराब होना नजससे लोगों की सुरक्षा खिरे में पड सकिी है;

(xiii) नकसी व्यनि को चोट पहुँचाने वाली, नकसी मशीनरी को नुकसान पहुँचाने वाली, या सामान्य खनन कायों में रुकावट पैिा करने वाली कोई स्लाइड;

(xiv) खुले खिान कायय में डंप या साइड का खराब होना; ब्लोआउट;

(xv) नकसी संरचना या संस्िापना का खराब होना नजससे लोगों की सुरक्षा खिरे में पड सकिी है; या नवद्युि ्लैश-ओवर के कारर् उत्पन्न नचंगारी से नकसी व्यनि को जलने

की चोट लग सकिी है;

(xvi) पेरोनलयम या रसायन ररसाव का कोई बडा अननयंनत्रि उत्सजयन;

(2) जब उप-ननयम 1 में उनल्लनखि अनुसूची में नननियष्ट कोई िुघयटना या खिरनाक घटना, नकसी प्रनिष्ठान में घनटि होिी है, नजसके पररर्ामस्वरूप नकसी व्यनि की मृत्यु हो

जािी है या नकसी व्यनि को ऐसी शारीररक चोट पहुँचिी है नजससे उसकी मृत्यु होने की आशंका है, िो ननम्ननलनखि को र्ी सूचना र्ेजी जाएगी: -

(क) नजला मनजस्रेट या उप-मंडल मनजस्रेट;

(ख) पुनलस िाने के प्रर्ारी अनधकारी;

(ग) घायल या मृि व्यनि के पररवार; और

(घ) अंिर-राज्यीय प्रवासी श्रनमक के मामले में संबंनधि राज्य के प्रानधकाररयों को।

(3) उप-ननयम (1) और (2) के िहि अपेनक्षि नकसी र्ी सूचना की पुनष्ट नकसी कारखाने के ननयोिा या प्रबंधक या नकसी प्रनिष्ठान के ननयोिा द्वारा िुघयटना के समय से 24

घंटे के र्ीिर इन उप-ननयमों में उनल्लनखि प्रानधकाररयों को फॉमय-07 में एक नलनखि ररपोटय र्ेजकर की जाएगी, नजसके पररर्ामस्वरूप नकसी व्यनि की मृत्यु हो जािी है या

नकसी व्यनि को शारीररक चोट पहुँचिी है नजससे उसकी मृत्यु होने की आशंका है। उपरोि अनुसूची में नननियष्ट नकसी खिरनाक घटना के मामले में, नजसके पररर्ामस्वरूप नकसी

व्यनि की मृत्यु या शारीररक चोट नहीं होिी है, उप-ननयम (1) में उनल्लनखि प्रानधकाररयों को प्रपत्र-07 में एक नलनखि ररपोटय र्ेजी जाएगी।

(4) जब उप-ननयम 1 में उनल्लनखि अनुसूची में नननियष्ट कोई िुघयटना या खिरनाक घटना नकसी प्रनिष्ठान में होिी है और इससे नकसी व्यनि को ऐसी शारीररक चोट पहुँचिी है

नजससे घायल व्यनि िुघयटना या खिरनाक घटना के िुरंि बाि 48 घंटे या उससे अनधक समय िक काम नहीं कर पािा है, िो प्रनिष्ठान का ननयोिा िुघयटना या खिरनाक घटना

के समय से 48 घंटे की समानप्त के 24 घंटे के र्ीिर प्रपत्र-07 में मुख्य ननरीक्षक-सह-सुनवधाप्रिािा को इसकी ररपोटय र्ेजेगा।

परन्‍िु, यह उपबंनधि है नक यनि नकसी िुघयटना के मामले में, पूवयगामी उप-ननयम में नननियष्ट नोनटस और ररपोटय र्ेजे जाने के बाि ऐसी िुघयटना से घायल नकसी व्यनि की मृत्यु

हो जािी है, िो प्रनिष्ठान का ननयोिा िुरंि टेलीफोन, नवशेर् संिेशवाहक या ई-मेल द्वारा उप-ननयम (2) और (3) में उनल्लनखि अनधकाररयों और व्यनियों को सूचना र्ेजेगा:

परन्‍िु यह और र्ी उपबंनधि है नक, यनि उप-ननयम (4) में नननियष्ट अडिालीस घंटे या उससे अनधक समय िक काम करने में असमियिा की अवनध िुघयटना के िुरंि बाि

6

DELHI GAZETTE : EXTRAORDINARY

PART IV]

नहीं होिी है, बनल्क बाि में एक से अनधक बार होिी है, िो ननरीक्षक-सह-सुनवधाप्रिािा और मुख्य ननरीक्षक-सह-सुनवधाप्रिािा को ररपोटय फॉमय-07 में उस घंटे के िुरंि बाि के

चौबीस घंटों के र्ीिर र्ेजी जाएगी, जब िुघयटना के पररर्ामस्वरूप काम करने में असमियिा की वास्िनवक कुल अवनध अडिालीस घंटे हो जािी है।

10 धारा 12 की उपधारा (1) और (2) के अंतर्गत रोर् की सूचना-

(1) नकसी प्रनिष्ठान के ननयोिा, अनधर्ोगी या प्रबंधक द्वारा, नजसमें संनहिा की िीसरी अनुसूची के अंिगयि अनधसूनचि कोई रोग पाया जािा है, रोग के ननिान की निनि से

एक सप्ताह के र्ीिर प्रपत्र-08 में रोग की सूचना ननरीक्षक-सह-सुनवधाप्रिािा और मुख्य ननरीक्षक-सह-सुनवधाप्रिािा को र्ौनिक रूप से र्ेजी जाएगी।

(2) संनहिा की िीसरी अनुसूची के अंिगयि अनधसूनचि रोग का पिा चलने पर नचनकत्सक द्वारा प्रपत्र-08 में सूचना रोग के ननिान की निनि से एक सप्ताह के र्ीिर ननरीक्षक-

सह-सुनवधाप्रिािा और मुख्य ननरीक्षक-सह-सुनवधाप्रिािा को र्ौनिक रूप से र्ेजी जाएगी।

11 धारा 13 के खंड (र्) और (छ) के तहत कमगचारी के कतगव्य.- यनि नकसी कमयचारी को प्रनिष्ठान में नकसी असुरनक्षि कायय या अस्वास््यकर नस्िनि के बारे में पिा चलिा

है, िो वह ननयोिा, स्वास््य और सुरक्षा प्रनिनननध या सुरक्षा अनधकारी को यिाशीघ्र इलेक्ट्रॉननक या नलनखि या टेलीफोन द्वारा ररपोटय करेगा।

12 धारा 14 की उपधारा (3) के अंतर्गत कमगचारी के अभधकार - कमयचारी से उसकी सुरक्षा और स्वास््य के नलए आसन्न खिरे की सूचना प्राप्त होने पर, ननयोिा इस संबंध

में ित्काल उपचारात्मक कारयवाई करेगा। ननयोिा, चाहे संिुष्ट हो या नहीं, ऐसी ररपोटय, की गई कारयवाई सनहि, ननरीक्षक-सह-सुनवधाप्रिािा को इलेक्ट्रॉननक रूप से या स्पीड पोस्ट

द्वारा र्ेजेगा।

अध्याय-4

व्यािसाभयक सुरिा और स्िास््य

13 धारा 17 की उपधारा (2) के अंतर्गत भिल्िी व्यािसाभयक सुरिा एिं स्िास््य सिाहकार बोडग का र्ठन-

(1) राष्ट्रीय राजधानी क्षेत्र निल्ली सरकार, "निल्ली व्यावसानयक सुरक्षा एवं स्वास््य सलाहकार बोडय" का गठन करेगी, नजसे आगे "बोडय" कहा जाएगा।

(2) बोडय में ननम्ननलनखि शानमल होंगे: -

(i) श्रम आयुि, श्रम नवर्ाग, सरकार.....अध्यक्ष (पिेन);

(ii) मुख्य ननरीक्षक-सह-सुनवधाकिाय, श्रम नवर्ाग, सरकार - सिस्य सनचव (पिेन);

(iii) सिस्य सनचव, निल्ली प्रिूर्र् ननयंत्रर् सनमनि, नई निल्ली - सिस्य (पिेन);

(iv) ननिेशक, निल्ली स्वास््य सेवाएँ, नई निल्ली - सिस्य (पिेन);

(v) अपर श्रम आयुि, श्रम नवर्ाग, सरकार - सिस्य (पिेन);

(vi) उप मुख्य ननरीक्षक-सह-सुनवधाकिाय, श्रम नवर्ाग, सरकार - सिस्य

(पिेन);

(vii) अनधर्ोगी, सबसे बडा एमएएच यानी प्रमुख िुघयटना उद्योग प्रनिष्ठान - सिस्य

(viii) ननयोिाओं के िो प्रनिनननध – सिस्य

(ix) कमयचाररयों के िो प्रनिनननध - सिस्य

(x) ऑफ-साइट आपािकालीन योजना के नजला संकट समूह के िो सिस्य, नजनके पास व्यावसानयक सुरक्षा और स्वास््य में नवशेर्ज्ञिा हो;

(3) बोडय संनहिा की धारा 17 की उपधारा (1) में नननियष्ट कायों के ननवयहन के नलए बैठक करेगा।

(4) उप-ननयम (2) के खंड (vii) से (x) में नननियष्ट सिस्यों का काययकाल िीन वर्य का होगा और ििनुसार, उस अवनध के नलए गैर-सरकारी सिस्यों को पहचान पत्र जारी

नकए जाएँगे।

(5) इस ननयम में नकसी र्ी बाि के होिे हुए र्ी, उप-ननयम (2) के खंड (vii) से (x) में नननियष्ट सिस्य सरकार की इच्छा पययन्ि पि पर बने रहेंगे।

(6) यनि कोई सिस्य अपना पिा बिलिा है, िो वह अपना नया पिा बोडय के सिस्य-सनचव को सूनचि करेगा, जो उसके बाि उसका नया पिा आनधकाररक अनर्लेखों में िजय

करेगा।

(7) जब बोडय की सिस्यिा में नकसी सिस्य का काययकाल पूरा होने पर या नकसी सिस्य के त्यागपत्र िेने या हटाए जाने के कारर् कोई ररनि होिी है या होने की संर्ावना होिी

है, िो सिस्य सनचव ररि स्िान को र्रने के नलए नकसी व्यनि को नानमि करने हेिु सरकार को एक ररपोटय प्रस्िुि करेगा।

(8) बोडय की बैठक ऐसे स्िानों और ऐसे समय पर होगी जैसा नक अध्यक्ष द्वारा िय नकया जा सकिा है और यह छह महीने में कम से कम एक बार बैठक करेगा।

[PART IV

DELHI GAZETTE : EXTRAORDINARY

7

(9) प्रस्िानवि बैठक की सूचना बोडय के सिस्यों को सामान्यििः िो सप्ताह पहले िी जाएगी। अध्यक्ष द्वारा अनुमोनिि प्रस्िानवि कायों की सूची सनहि सूचना राज्य बोडय के प्रत्येक

सिस्य को ई-मेल या पंजीकृि डाक या स्पीड पोस्ट या नवशेर् संिेशवाहक द्वारा र्ेजी जाएगी।

(10) यनि अध्यक्ष नकसी अत्यावश्यक मामले पर नवचार करने के नलए बोडय की आपािकालीन बैठक बुलािा है, िो प्रत्येक सिस्य को ई-मेल या पंजीकृि डाक या स्पीड पोस्ट

या नवशेर् संिेशवाहक द्वारा उनचि समय के साि सूचना र्ेजी जाएगी।

(11) बोडय की बैठक नजस उद्देश्य से बुलाई गई है, उसके अलावा कोई अन्य कायय अध्यक्ष की अनुमनि के नबना बैठक में नहीं नकया जाएगा।

(12) बोडय की नकसी र्ी बैठक में िब िक कोई कायय नहीं नकया जाएगा जब िक नक कम से कम साि सिस्य उस बैठक में उपनस्िि न हों, नजसमें कम से कम एक गैर-सरकारी

सिस्य शानमल होगा: परन्‍िु, यनि नकसी बैठक में साि से कम सिस्य उपनस्िि हों, िो अध्यक्ष, उपनस्िि सिस्यों को सूनचि करिे हुए, बैठक को नकसी अन्य निनि के नलए

स्िनगि कर सकिा है। वह अन्य सिस्यों को यह सूचना िेगा नक वह स्िनगि बैठक में कायय ननपटाने का प्रस्िाव रखेगा, चाहे ननधायररि गर्पूनिय हो या न हो, और िब उसके नलए

स्िनगि बैठक में कायय ननपटाना वैध होगा, चाहे उपनस्िि सिस्यों की संख्या कुछ र्ी हो।

(13) प्रत्येक मामले पर, नजस पर बोडय को नवचार करना आवश्यक है, बोडय की बैठक में नवचार नकया जाएगा

या यनि अध्यक्ष ऐसा ननिेश िें, िो प्रत्येक सिस्य को आवश्यक कागजाि र्ेजकर राय के नलए, और मामले का ननपटारा बहुमि के उस ननर्य के अनुसार नकया जाएगा:

परंिु जहाँ नकसी मामले पर बहुमि की कोई राय नहीं है और बोडय के सिस्य बराबर नवर्ानजि हैं, वहाँ अध्यक्ष के पास िूसरा या ननर्ायक मि होगा।

(14) सिस्य सनचव, अध्यक्ष के अनुमोिन से, बोडय की बैठकें बुलाने के नलए सूचना जारी करेगा और काययवृत्त का ररकॉडय रखेगा और बोडय के ननर्य को लागू करने के नलए

आवश्यक किम उठाएगा।

14 त्यार्पत्र.-

(1) बोडय का कोई सिस्य, जो पिेन सिस्य न हो, नलनखि रूप में सरकार को संबोनधि पत्र द्वारा त्यागपत्र िे सकिा है।

(2) ऐसे सिस्य का पि, सरकार द्वारा उसका त्यागपत्र स्वीकार करने की िारीख से अिवा त्यागपत्र की सूचना प्राप्त होने की निनि से िीस निन की समानप्त पर, इनमें जो र्ी

पहले हो, से ररक्ट्‍ि हो जाएगा।

15 सिस्यता की समाभप्त.-

(1) यनि राज्य बोडय का कोई सिस्य, जो पिेन सिस्य न हो, बोडय के अध्यक्ष द्वारा ऐसी अनुपनस्िनि के नलए स्वीकृि अवकाश प्राप्त नकए नबना, बोडय की लगािार िीन बैठकों

में उपनस्िि नहीं होिा है, िो वह बोडय का सिस्य नहीं रह जाएगा:

परंिु यनि अध्यक्ष को यह समाधान हो जािा है नक ऐसे सिस्य को लगािार िीन बैठकों में उपनस्िि होने से पयायप्त कारर् से रोका गया िा, िो वह ननिेश िे सकिा है नक ऐसी

समानप्त नहीं होगी और ऐसा ननिेश निए जाने पर, ऐसा सिस्य बोडय का सिस्य बना रहेगा।

(2) यनि कोई नानमि सिस्य उस नहि वगय का प्रनिनननधत्व करना बंि कर िेिा है, नजसके नलए उसे नानमि नकया गया िा, िो वह बोडय का सिस्य नहीं रह जाएगा।

16 सिस्यता के भिए अयोग्यता.- कोई व्यनि बोडय का सिस्य होने के नलए अयोग्य होगा-

(i) यनि वह नवकृि नचत्त है और नकसी सक्षम प्रानधकारी द्वारा ऐसा घोनर्ि नकया गया है;

(ii) यनि वह अनुन्मुि निवानलया है; या

(iii) यनि उसे नकसी ऐसे अपराध के नलए िोर्नसि नकया गया है, नजसके नलए िीन माह या उससे अनधक के कारावास का िंड है।

17 सिस्यता से हटाया जाना.- सरकार बोडय के नकसी सिस्य को हटा सकिी है, यनि उसकी राय में ऐसे सिस्य ने उस नहि का प्रनिनननधत्व करना बंि कर निया है नजसका वह

बोडय में प्रनिनननधत्व करने का िात्पयय रखिा है।

18 सिस्यों के यात्रा ित्ते.-

(1) बोडय के नकसी सरकारी सिस्य का यात्रा र्त्ता उसके द्वारा सरकारी कियव्यों के नलए की गई यात्रा के नलए लागू ननयमों द्वारा शानसि होगा और उसका र्ुगिान उसे वेिन िेने

वाले प्रानधकारी द्वारा नकया जाएगा।

(2) बोडय के गैर-सरकारी सिस्य को बोडय की बैठक में र्ाग लेने के नलए यात्रा र्त्ता और िैननक र्त्ता ऐसी िरों पर निया जाएगा जो सरकार के उप सनचव को स्वीकायय हैं और

िैननक र्त्ते की गर्ना ऐसे उप सनचव को अनुमन्य अनधकिम िर पर की जाएगी।

19 धारा 17 की उपधारा (3) के अंतर्गत तकनीकी सभमभत –

(1) िकनीकी सनमनि और सलाहकार सनमनि के सिस्यों की न्यूनिम और अनधकिम संख्या िमशिः िीन और साि होगी।

(2) िकनीकी सनमनि या सलाहकार सनमनि के सिस्यों को संबंनधि क्षेत्र में नवशेर्ज्ञिा होनी चानहए।

8

DELHI GAZETTE : EXTRAORDINARY

PART IV]

20 धारा 21 की उपधारा (1) के अंतर्गत अंतर-राज्यीय प्रिासी िभमकों के भिए आंकडा संग्रहण एिं पोटगि-

ननयोिा, इस प्रयोजन के नलए नननियष्ट वेब पोटयल पर व्यावसानयक सुरक्षा एवं स्वास््य संबंधी आंकडों का नववरर् इलेक्ट्रॉननक रूप से प्रस्िुि करेगा।

21 धारा 22 की उपधारा (1) के अंतर्गत सुरिा सभमभत -

(1) प्रत्येक ऐसे प्रनिष्ठान को सुरक्षा सनमनि का गठन करना होगा, जहां :

(i) 250 या अनधक श्रनमकों को ननयोनजि नकया गया हो; या

(ii) वह संनहिा की धारा 2(ज़ेडए) में पररर्ानर्ि खिरनाक प्रनियाओं में शानमल हो; या

(iii) संनहिा की धारा 82 में पररर्ानर्ि खिरनाक प्रचालन से संबि हो।

(2) सुरक्षा सनमनि का गठन ननम्ननलनखि िरीके से नकया जाएगा:-

(i) ननयोिा या उसका अनधकृि प्रनिनननध सुरक्षा

सनमनि के गठन के नलए एक सूचना जारी करेगा और श्रनमकों के प्रनिनननधयों को सूनचि करेगा और सूचना पट्ट पर र्ी प्रिनशयि करेगा।

(ii) सूचना में सुरक्षा सनमनि में श्रनमकों के प्रनिनननधयों के नामांकन का आह्वान नकया जाएगा।

(iii) श्रनमकों का प्रनिनननध श्रनमकों द्वारा चुना जाएगा। सनमनि में मनहला श्रनमकों का पयायप्त प्रनिनननधत्व होना चानहए।

(iv) सुरक्षा सनमनि के प्रबंधन के प्रनिनननधयों में शानमल होंगे: -

(क) एक वररष्ठ अनधकारी, जो प्रनिष्ठान में अपने पि के आधार पर, सनमनि के कामकाज में प्रर्ावी रूप से योगिान िे सके। ऐसा वररष्ठ अनधकारी सुरक्षा

सनमनि का अध्यक्ष होगा;

(ख) एक सुरक्षा अनधकारी या "नचनकत्सा अनधकारी", जहाँ र्ी उपलब्ध हो, और ऐसे मामले में सुरक्षा अनधकारी, सुरक्षा सनमनि का सनचव होगा; और

(ग) मानव संसाधन, उत्पािन, रखरखाव और िय

नवर्ागों से एक-एक प्रनिनननध।

(3) सुरक्षा सनमनि का काययकाल िीन वर्य का होगा।

(4) सुरक्षा सनमनि की बैठक प्रत्येक निमाही में कम से कम एक बार होगी।

(5) सुरक्षा सनमनि को ननम्ननलनखि के संबंध में जानकारी प्राप्त करने का अनधकार होगा -

(i) काययस्िल पर श्रनमकों को होने वाले संर्ानवि सुरक्षा और स्वास््य संबंधी खिरे;

(ii) िुघयटनाओं के आँकडे, साि ही ऐसे प्रनिष्ठानों में कायय वािावरर् और कमयचाररयों के स्वास््य की ननगरानी से उत्पन्न आँकडे।

(6) ननयोिा, अनधर्ोगी या प्रबंधक, सुरक्षा सनमनि की नसफाररशों की प्रानप्त की निनि से 15 निनों की अवनध के र्ीिर, नसफाररशों को लागू करने के नलए कारयवाई करेगा।

(7) बैठक का काययवृत्त िजय नकया जाएगा और मांगने परननरीक्षक-सह-सुनवधाकिाय के समक्ष प्रस्िुि नकया जाएगा।

(8) सुरक्षा सनमनि के कायों और कियव्यों में ननम्ननलनखि शानमल होंगे: -

(i) प्रनिष्ठान की स्वास््य एवं सुरक्षा नीनि में उनल्लनखि लक्ष्यों और उद्देश्यों को प्राप्त करने में प्रबंधन की सहायिा और सहयोग करना;

(ii) स्वास््य, सुरक्षा और पयायवरर् से संबंनधि सर्ी मामलों से ननपटना और आने वाली समस्याओं का

व्यावहाररक समाधान ननकालना;

(iii) सर्ी कमयचाररयों में सुरक्षा जागरूकिा पैिा करना;

(iv) शैनक्षक, प्रनशक्षर् और प्रचारात्मक गनिनवनधयाँ आयोनजि करना;

(v) सुरक्षा, पयायवरर् और व्यावसानयक स्वास््य सवेक्षर्ों, आपािकालीन योजनाओं, सुरक्षा लेखा-परीक्षर्ों, जोनखम मूल्यांकन की ररपोटों पर नवचार-नवमशय करना और ररपोटों

में की गई नसफाररशों का कायायन्वयन करना;

(vi) स्वास््य और सुरक्षा सवेक्षर् करना और िुघयटनाओं के कारर्ों की पहचान करना;

(vii) कमयचाररयों की सुरक्षा और स्वास््य के नलए आसन्न खिरे की संर्ावना पर की गई नकसी र्ी नशकायि पर नवचार करना और सुधारात्मक उपाय सुझाना; और उसके द्वारा

की गई नसफाररशों के कायायन्वयन की समीक्षा करना।

(9) जहाँ प्रनिष्ठान के आकार या नकसी अन्य कारर् से, उपननयम (8) में नननियष्ट कायय सुरक्षा सनमनि द्वारा प्रर्ावी ढंग से नहीं नकए जा सकिे, वहाँ वह अपनी सहायिा के नलए

आवश्यकिानुसार उप-सनमनि स्िानपि कर सकिी है।

22 धारा 22 की उपधारा (2) के अंतर्गत सुरिा अभधकारी। -

(1) ननम्‍नांनकि नवशेर्िाओं वाले प्रनिष्ट्‍ठान में एक सुरक्षा अनधकारी होगा, -

(i) पाँच सौ या अनधक श्रनमकों को ननयोनजि करने वाले कारखानों के नलए:

परन्िु इस खंड के प्रयोजनों के नलए, प्रत्येक पाँच सौ श्रनमकों या उनके एक अंश के नलए एक अनिररि सुरक्षा अनधकारी होगा; या

[PART IV

DELHI GAZETTE : EXTRAORDINARY

9

(ii) खिरनाक प्रनिया या र्वन या अन्य ननमायर् कायय करने वाले कारखानों के नलए, नजनमें िो सौ पचास या अनधक श्रनमक ननयोनजि हैं:

परन्िु इस खंड के प्रयोजनों के नलए, प्रत्येक िो सौ पचास श्रनमकों या उनके एक अंश के नलए एक अनिररि सुरक्षा अनधकारी होगा।

(2) कोई व्यनि सुरक्षा अनधकारी के रूप में ननयुनि के नलए िर्ी पात्र होगा, जब उसने -

(i) नकसी मान्यिा प्राप्त नवश्वनवद्यालय या संस्िान से इंजीननयररंग या प्रौद्योनगकी की नकसी र्ी शाखा में नडग्री प्राप्त की हो और उसे नकसी कारखाने या र्वन या अन्य ननमायर्

कायय में पययवेक्षी क्षमिा में कम से कम िो वर्य का व्यावहाररक कायय करने का अनुर्व हो या नकसी मान्यिा प्राप्त नवश्वनवद्यालय या संस्िान से र्ौनिकी या रसायन नवज्ञान में नडग्री

प्राप्त की हो और उसे नकसी कारखाने या र्वन या अन्य ननमायर् कायय में पययवेक्षी क्षमिा में कम से कम पाँच वर्य का व्यावहाररक कायायनुर्व हो, या इंजीननयररंग या प्रौद्योनगकी

की नकसी र्ी शाखा में मान्यिा प्राप्त नडप्लोमा प्राप्‍ि नकया हो और उसे नकसी कारखाने या र्वन या अन्य ननमायर् कायय में पययवेक्षी क्षमिा में कम से कम पाँच वर्य की अवनध

िक कायय करने का व्यावहाररक अनुर्व हो; और

(ii) उसे उस क्षेत्र के अनधकांश श्रनमकों द्वारा बोली जाने वाली र्ार्ा का पयायप्त ज्ञान हो जहाँ वह कारखाना या र्वन या अन्य ननमायर् कायय नस्िि है जहाँ उसे ननयुि नकया जाना

है।

(3) कारखाने का अनधर्ोगी या र्वन या अन्य ननमायर् प्रनिष्ठान का ननयोजक, जैसा र्ी मामला हो, मुख्य ननरीक्षक-सह-सुनवधाप्रिािा और ननरीक्षक-सह-सुनवधाप्रिािा को

सुरक्षा अनधकारी की ननयुनि के बारे में ऐसी ननयुनि से एक माह के र्ीिर सूनचि करेगा।

(4) सुरक्षा अनधकारी के ननम्ननलनखि कियव्य होंगे, अिायि्: -

(i) व्यनिगि चोटों की रोकिाम और सुरनक्षि कायय वािावरर् बनाए रखने से संबंनधि, प्रनिष्ठान के प्रबंधन को

उसके वैधाननक या अन्यिा िानयत्वों की पूनिय में सलाह िेना और सहायिा प्रिान करना;

(ii) व्यनिगि चोटों के प्रर्ावी ननयंत्रर् के नलए आवश्यक उपायों की योजना बनाने और व्यवनस्िि करने में संबंनधि नवर्ागों को सलाह िेना;

(iii) सर्ी कायय अध्ययनों में सुरक्षा पहलुओं पर सलाह िेना, और चयननि कायों का नवस्िृि कायय सुरक्षा अध्ययन करना;

(iv) व्यनिगि चोटों की रोकिाम के नलए की गई या प्रस्िानवि कारयवाई की प्रर्ावशीलिा की जाँच और मूल्यांकन करना;

(v) व्यनिगि सुरक्षा उपकरर्ों की उच्च गुर्वत्ता और उपलब्धिा सुनननिि करने में िय और र्ंडारर् नवर्ागों को सलाह िेना;

(vi) संयंत्र सुरक्षा ननरीक्षर् से संबंनधि मामलों पर सलाह िेना;

(vii) कायय की र्ौनिक नस्िनियों और श्रनमकों द्वारा अपनाई जाने वाली कायय पिनियों एवं प्रनियाओं का अवलोकन करने के नलए संयंत्र सुरक्षा ननरीक्षर् करना और असुरनक्षि

र्ौनिक नस्िनियों को िूर करने ििा श्रनमकों द्वारा असुरनक्षि कायों को रोकने के नलए अपनाए जाने वाले उपायों पर सलाह िेना;

(viii) औद्योनगक िुघयटनाओं और व्यावसाय जन्‍य रोगों की ररपोनटिंग और जाँच से संबंनधि मामलों पर सलाह िेना;

(ix) िुघयटनाओं की जाँच करना;

(x) संनहिा के अंिगयि ररपोटय योग्य व्यावसानयक रोगों और खिरनाक घटनाओं के मामलों की जाँच करना;

(xi) िुघयटनाओं, खिरनाक घटनाओं और व्यावसानयक रोगों से संबंनधि आवश्यक अनर्लेखों के रखरखाव पर सलाह िेना;

(xii) सुरक्षा सनमनियों की स्िापना को बढावा िेना और ऐसी सनमनियों के सलाहकार एवं संयोजक के रूप में कायय करना;

(xiii) प्रनिष्ट्‍ठान के संबंनधि नवर्ागों के सहयोग से अनर्यान, प्रनियोनगिाएँ, मुकाबले और अन्य गनिनवनधयाँ आयोनजि करना जो सुरनक्षि कायय नस्िनियों और प्रनियाओं को

स्िानपि करने और बनाए रखने में श्रनमकों की रुनच को नवकनसि और बनाए रखेंगे; और

(xiv) व्यनिगि चोटों की रोकिाम के नलए उपयुि प्रनशक्षर् और शैनक्षक काययिमों को स्विंत्र रूप से या प्रनिष्ठान के प्रनशक्षर् नवर्ाग के सहयोग से नडज़ाइन और संचानलि

करना।

(5) प्रनिष्ठान का ननयोिा प्रत्येक सुरक्षा अनधकारी को ऐसी सुनवधाएँ, उपकरर् और जानकारी प्रिान करेगा जो उसे अपने कियव्यों का प्रर्ावी ढंग से ननवयहन करने में सक्षम बनाने

के नलए आवश्यक हों।

(6) नकसी र्ी सुरक्षा अनधकारी को ऐसा कोई कायय करने की आवश्यकिा या अनुमनि नहीं िी जाएगी जो उप-ननयम (5) में नननियष्ट कियव्यों के ननष्ट्पािन के नलए असंगि या

हाननकारक हो।

10

DELHI GAZETTE : EXTRAORDINARY

PART IV]

अध्याय-5

कायग के र्ंटे और िेतन सभहत िाभषगक अिकाश

23 धारा 25 की उपधारा (1) के खंड (ख) के अंतर्गत िैभनक और साप्ताभहक कायग र्ंटे:

(1) नकसी र्ी कमयचारी को नकसी प्रनिष्ठान में नकसी र्ी सप्ताह में 48 घंटे से अनधक काम करने की आवश्यकिा नहीं होगी या उसे ऐसा करने की अनुमनि नहीं होगी।

(2) उपनियम 1 के अधीि, नकसी र्ी निन काम के कुल घंटों की संख्या िस से अनधक नहीं होगी।

(3) नकसी प्रनिष्ठाि में प्रत्येक निि वयस्क कममचारिय ों की कायम अवनध इस प्रकाि निधामरिि की जाएगी नक कम से कम आधे

घोंटे के नवश्राम अोंििाल से पहले क ई भी अवनध 6 घोंटे से अनधक िहीों ह गी औि उसके नवश्राम अोंििाल सनहि, वह नकसी भी

निि 12 घोंटे से अनधक िहीों ह गी।

24 धारा (26) की धारा (2) के अंतर्गत साप्ताभहक भििाम भििस -

(1) नकसी र्ी कमयचारी को सप्ताह के प्रिम निन (नजसे इसके पिाि उि निन कहा जाएगा) नकसी प्रनिष्ठान में काम करने की आवश्यकिा नहीं होगी या उसे काम करने की

अनुमनि नहीं िी जाएगी, जब िक नक-

(क) उसे उि निन से ठीक पहले या बाि के िीन निनों में से नकसी एक निन पूरे निन का अवकाश न नमला हो या न नमले; और

(ख) प्रनिष्ठान के ननयोिा ने उि निन या खंड (क) के अंिगयि प्रनिस्िानपि निन से पहले, जो र्ी पहले हो, -

(i) ननरीक्षक-सह-सुनवधाप्रिािा को कमयचारी से उि निन और प्रनिस्िानपि नकए जाने वाले निन काम करने की अपेक्षा करने के अपने इरािे की सूचना न िी हो,

और

(ii) प्रनिष्ठान में इस आशय की सूचना प्रिनशयि न की हो:

परन्‍िु, ऐसा कोई प्रनिस्िापन न नकया जाए नजसके पररर्ामस्वरूप कोई कमयचारी पूरे निन के अवकाश के नबना लगािार िस निनों से अनधक काम करे।

(2) उप-ननयम (1) के अंिगयि िी गई सूचना को ननरीक्षक-सह-सुनवधाप्रिािा को निए गए नोनटस द्वारा और प्रनिष्ठान में प्रिनशयि नकए गए नोनटस द्वारा रद्द नकया जा सकिा है,

जो उि निन या रद्द नकए जाने वाले अवकाश से एक निन पहले, इनमें जो र्ी पहले हो, िक नहीं होना चानहए।

(3) जहाँ, उप-ननयम (1) के प्रावधानों के अनुसार, कोई र्ी कमयचारी उि निन काम करिा है और उसके ठीक पहले के िीन निनों में से नकसी एक निन उसे अवकाश नमला

हो, िो उस निन को, उसके साप्तानहक कायय घंटों की गर्ना के प्रयोजनािय, पूवयविी सप्ताह में शानमल नकया जाएगा।

25 प्रभतपूरक अवकाश. -

(1) ऐसे नकसी कायय में लगे श्रनमक के मामले को छोडकर, नजसे िकनीकी कारर्ों से

पूरे निन लगािार काम करना आवश्यक हो, संनहिा की धारा 26 की उपधारा (3) के अंिगयि िी जाने वाली प्रनिपूरक छुरट्टयां इस प्रकार अंिराल पर होंगी नक

एक सप्ताह में िो से अनधक प्रनिपूरक छुरट्टयां न िी जाएं।

(2) प्रनिष्ठान का प्रबंधक, उस माह के अंि में या उससे पहले, नजसमें अवकाश समाप्त हो गए हों, अगले माह के िौरान प्रनिपूरक अवकाश प्राप्त करने वाले श्रनमकों के संबंध में

और उनकी निनियों के बारे में एक सूचना, उस स्िान पर प्रिनशयि करेगा जहाँ धारा 31 के अंिगयि ननधायररि कायय अवनधयों की सूचना प्रिनशयि की गई है। नकसी र्ी प्रनिपूरक

अवकाश के संबंध में सूचना में कोई र्ी बाि में पररवियन उस अवकाश की निनि से कम से कम िीन निन पहले नकया जाएगा।

(3) कोई र्ी प्रनिपूरक अवकाश या अवकाश, नजसके नलए कोई श्रनमक हकिार है, उसे सेवामुि या बखायस्ि नकए जाने से पहले निया जाएगा और उसे सेवामुि या बखायस्ि

नकए जाने से पहले िी जाने वाली नकसी र्ी सूचना अवनध के र्ाग के रूप में नहीं नगना जाएगा।

26 धारा 27 के अंतर्गत ओिरटाइम के भिए अभतररक्त मजिूरी -

(1) नकसी र्ी कमयचारी को वर्य की नकसी र्ी निमाही में एक सौ चौवालीस घंटे से अनधक ओवरटाइम काम करने की अनुमनि नहीं िी जाएगी।

(2) नकसी र्ी निन ओवरटाइम की गर्ना करिे समय, 15 से 30 नमनट के बीच के घंटे के अंश को 30 नमनट के रूप में नगना जाएगा और 30 नमनट से अनधक के मामले

में इसे पूर्ािंनकि नकया जाएगा और वास्िनवक आधार पर एक घंटे के रूप में नगना जाएगा।

(3) मानसक र्ुगिान वाले कमयचारी के मामले में मजिूरी या आय की गर्ना करिे समय, िैननक मजिूरी उसकी मानसक मजिूरी का 1/26वां र्ाग होगी; और नकसी अन्य

कमयचारी के मामले में, यह िैननक मजिूरी

या आय होगी, जैसा र्ी मामला हो।

(4) जहां कोई कमयचारी नकसी प्रनिष्ठान में नकसी निन आठ घंटे से अनधक या नकसी सप्ताह में अडिालीस घंटे से अनधक काम करिा है, वह ओवरटाइम कायय के संबंध में,

अपनी सामान्य मजिूरी िर से िोगुनी िर से मजिूरी का हकिार होगा।

[PART IV

DELHI GAZETTE : EXTRAORDINARY

11

(5) कािखाि ों, भवि या अन्य निमामण में निम्ननलखखि कायों औि परिखिनिय ों के िहि श्रनमक ों के नलए प्रसाि उि घोंट ों से अनधक

ह गा ज सिकाि द्वािा धािा 25 (1) (बी) के िहि नकसी एक निि में अनधसूनचि नकए गए हैं, अर्ामि:

(क) ित्काल मरम्मि;

(ख) प्रारंनर्क या पूरक प्रकृनि का कायय;

(ग) ऐसा कायय जो अननवायय रूप से इिना रुक-रुक कर होिा है नक नजन अंिरालों में वे ड्यूटी पर रहिे हुए काम नहीं करिे वे सामान्यििः नवश्राम के अंिरालों से अनधक होिे हैं;

(घ) ऐसा कायय जो िकनीकी कारर्ों से ननरंिर नकया जाना आवश्यक है;

(ङ) अत्यंि आवश्यक वस्िुओं के ननमायर् या आपूनिय में लगे हुए हैं नजन्हें प्रनिनिन बनाया या आपूनिय नकया जाना आवश्यक है,

(च) ऐसी प्रनिया में लगे हुए हैं जो नननिि मौसमों के अलावा नहीं की जा सकिी;

(छ) ऐसी प्रनिया में लगे हुए हैं जो प्राकृनिक शनियों की अननयनमि निया पर ननर्यर समय के अलावा नहीं की जा सकिी;

(ज) इंजन कक्षों या बॉयलर हाउसों में लगे हुए हैं या नबजली संयंत्र या संचरर् मशीनरी की िेखर्ाल में लगे हुए हैं;

(झ) मशीनरी के खराब होने के कारर् प्रनिया में लगे हुए हैं;

(ञ) रेलवे वैगनों या लॉररयों या रकों की लोनडंग या अनलोनडंग में लगे हुए;

(ट) असाधारर् कायय में लगे हुए;

(ठ) नकसी ऐसे कायय में लगे हुए, नजसे सरकार द्वारा आनधकाररक राजपत्र में राष्ट्रीय महत्व के कायय के रूप में अनधसूनचि नकया गया हो;

27 धारा 31 के अंतर्गत कायग अिभध की सूचना -

कायय अवनध की सूचना प्रपत्र-09 में प्रमुख स्िानों, नवशेर्कर पररसर के प्रवेश द्वार पर प्रिनशयि की जाएगी और ऐसी सूचना की प्रनि ननरीक्षक-सह-सुनवधाप्रिािा को इलेक्ट्रॉननक

रूप से या पंजीकृि डाक द्वारा र्ेजी जाएगी।

अध्याय-6

रभजस्टर, अभििेख और भििरभणयाँ

28 धारा 33 के अंतर्गत ररपोटग, रभजस्टर और अन्य अभििेखों का रखरखाि और प्रस्तुतीकरण-

प्रत्येक भनयोक्ता-

(क) श्रनमकों, मजिूरी, ओवरटाइम, जुमायने, क्षनि या हानन के नलए कटौिी का रनजस्टर प्रपत्र-10 में इलेक्ट्रॉननक रूप से बनाए रखेगा और उसे प्रनिष्ठान के पररसर में नकसी

कायायलय या ननकटिम सुनवधाजनक

र्वन में उपलब्ध रखेगा;

(ख) ननयोिा या ठेकेिार, जैसा र्ी मामला हो, प्रनिष्ठान में अपने द्वारा ननयोनजि सर्ी व्यनियों का एक मस्टर रोल प्रपत्र-11 में इलेक्ट्रॉननक रूप से या मैन्युअल रूप से बनाए

रखेगा और प्रत्येक कायय अवनध के प्रारंर् और समानप्त पर प्रनवनष्टयाँ की जाएँगी।

ननयोिा इसे ननरीक्षक-सह-सुनवधाप्रिािा को ननरीक्षर् के नलए कायय समय के िौरान हर समय आसानी से उपलब्ध कराएगा।

(ग) मैनुअल रनजस्टर और अन्य अनर्लेखों के मामले में, उन्‍हें अंग्रेजी या नहंिी में स्याही से स्पष्ट रूप से िजय नकया जाएगा;

(घ) अंनिम ररपोटय या प्रनवनष्ट की निनि के बाि उसे नकसी र्ी कैलेंडर वर्य की अवनध के नलए मूल रूप में संरनक्षि नकया जाएगा;

परंिु जब मूल अनर्लेख एक वर्य की अवनध की समानप्त से पहले खो जािा है या नष्ट हो जािा है, िो उसकी सत्य प्रनियां, यनि उपलब्ध हों, ननधायररि अवनध के नलए संरनक्षि

की जाएंगी;

(ङ) मुख्य ननरीक्षक-सह-सुनवधाकिाय या ननरीक्षक-सह-सुनवधाकिाय या सरकार की ओर से अनधकृि नकसी व्यनि के समक्ष मांगे जाने पर, उसे इलेक्ट्रॉननक रूप से या पंजीकृि

डाक द्वारा प्रस्िुि नकया जाएगा।

29 धारा 33 के अंतर्गत िेतन सभहत अिकाश का रभजस्टर-

(1) प्रत्येक प्रनिष्ठान का ननयोिा, अनधर्ोगी या प्रबंधक अपने प्रत्येक कमयचारी के संबंध में वेिन सनहि अवकाश का ररकॉडय इलेक्ट्रॉननक रूप से या मैन्युअल रूप से प्रपत्र-12

में रखेगा।

(2) उप-ननयम (1) में उनल्लनखि रनजस्टर को अंनिम प्रनवनष्ट नकए जाने के बाि िो वर्य की अवनध िक सुरनक्षि रखा जाएगा और उस अवनध की समानप्त के बाि र्ी नष्ट नहीं

नकया जाएगा, जब िक नक उसे नए रनजस्टर में उनचि रूप से स्िानांिररि नहीं कर निया जािा।

30 धारा 33 के अंतर्गत िुर्गटना और खतरनाक र्टना का रभजस्टर -

िुघयटना और खिरनाक घटना का रनजस्टर प्रत्येक प्रनिष्ठान के ननयोिा, अनधर्ोगी या प्रबंधक द्वारा फॉमय-13 में रखा जाएगा।

31 धारा 33 के अंतर्गत सूचना पट्ट का प्रिशगन-

12

DELHI GAZETTE : EXTRAORDINARY

PART IV]

प्रत्येक प्रनिष्ठान का ननयोिा, अनधर्ोगी या प्रबंधक, अपने ननयंत्रर्ाधीन काययस्िल पर, प्रपत्र संख्या -14 में, प्रमुख स्िान पर सूचना पट्ट प्रिनशयि करवाएगा।

32 धारा 33 के अंतर्गत भििरणी –

नकसी प्रनिष्ठान का प्रत्येक ननयोिा, ऐसे प्रनिष्ठान से संबंनधि नववरर्ी, प्रपत्र-15 में, अनधकाररिा रखने वाले ननरीक्षक-सह-सुनवधाप्रिािा को प्रनिवर्य र्ेजेगा िानक वह प्रत्येक

कैलेंडर वर्य की समानप्त के बाि 31 जनवरी िक इलेक्ट्रॉननक रूप से उसके पास पहुँच जाए।

अध्याय-7

भनरीिक-सह-सुभिधाकताग और अन्य प्राभधकारी

33 धारा 34 की उपधारा (5) के अंतर्गत मुख्य भनरीिक-सह-सुभिधाकताग:

(1) कारखानों और कारखानों के अलावा अन्य प्रनिष्ठानों के सुरक्षा एवं स्वास््य प्रावधानों के नलए -

मान्यिा प्राप्त नवश्वनवद्यालय या संस्िान से इंजीननयररंग या प्रौद्योनगकी में स्नािक की नडग्री या नकसी र्ी नवर्य में समकक्ष नडग्री ििा उप मुख्य ननरीक्षक-सह-सुनवधाकिाय के रूप

में कम से कम पांच वर्य का अनुर्व।

(2) उप-ननयम (1) में उनल्लनखि प्रनिष्ठानों को छोडकर - अपर श्रम आयुि

34 धारा 35 की उपधारा (1) के खंड (x) के अधीन भनरीिक-सह-सुभिधाकताग की शभक्तयाँ। -

नमूने िेने की भिभध-

(1) ननरीक्षक-सह-सुनवधाकिाय नकसी प्रनिष्ठान के सामान्य कायय समय के िौरान नकसी र्ी समय,

उस प्रनिष्ठान के अनधष्ठािा या प्रबंधक या ननयोजक या उस समय प्रनिष्ठान का प्रर्ारी होने का िावा करने वाले अन्य व्यनि को सूनचि करने के पिाि, प्रनिष्ठान में प्रयुि या

प्रयुि नकए जाने के नलए आशनयि नकसी पिािय का पयायप्त नमूना इसमें आगे िी गई नवनध से ले सकिा है, ऐसा उपयोग-

(क) ननरीक्षक-सह-सुनवधाकिाय के नवश्वास में संनहिा या उसके अधीन बनाए गए ननयमों के नकसी उपबंध का उल्लंघन है; या

(ख) ननरीक्षक-सह-सुनवधाकिाय की राय में कारखाने में काम करने वाले श्रनमकों को शारीररक क्षनि पहुँचने की आशंका है, उनके स्वास््य को सर्ी प्रकार की क्षनि पहुँचाने की

आशंका है।

(2) जहाँ ननरीक्षक-सह-सुनवधाकिाय उप-ननयम (1) के अंिगयि नमूना लेिा है, वहाँ वह उस उप-ननयम के अंिगयि सूनचि व्यनि की उपनस्िनि में, जब िक नक वह व्यनि

जानबूझकर अनुपनस्िि न हो, नमूने को िीन र्ागों में नवर्ानजि करेगा और उन्हें प्रर्ावी रूप से सीलबंि करेगा और उपयुि रूप से नचनिि करेगा और ऐसे व्यनि को उस पर

अपनी मुहर और नचि लगाने की अनुमनि िेगा।

(3) पूवोि रूप से सूनचि व्यनि, यनि ननरीक्षक-सह-सुनवधाकिाय ऐसी अपेक्षा करिा है, िो इस ननयम के अंिगयि नलए गए नमूने को नवर्ानजि करने, सील करने और नचनिि

करने के नलए उपकरर् उपलब्ध कराएगा।

(4) ननरीक्षक-सह-सुनवधाकिाय -

(क) नमूने का एक र्ाग उप-ननयम (1) के अंिगयि सूनचि व्यनि को िुरंि िेगा;

(ख) िूसरा र्ाग नवश्लेर्र् और उस पर ररपोटय के नलए सरकारी नवश्लेर्क को िेगा;

(ग) िीसरा र्ाग उस न्यायालय में प्रस्िुि करने के नलए रखेगा नजसके समक्ष पिािय के संबंध में कोई काययवाही, यनि कोई हो, शुरू की गई है।

(5) नकसी सरकारी नवश्लेर्क द्वारा इस ननयम के अधीन नवश्लेर्र् और ररपोटय के नलए प्रस्िुि नकसी पिािय पर उसके हस्िाक्षर सनहि ररपोटय होने का िात्पयय रखने वाले नकसी

िस्िावेज को उस पिािय के संबंध में संनस्िि नकसी काययवाही में साक्ष्य के रूप में उपयोग नकया जा सकेगा।

35 धारा 38 की उपधारा (1) के खंड (क) के उप-खंड (र्) के अंतर्गत िैकभल्पक रोजर्ार प्रिान करने का तरीका-

(1) यनि कोई व्यनि नजसका रोजगार धारा 38 की उप-धारा (1) के उपखंड (क) के िहि नकसी आिेश से प्रर्ानवि हुआ है, िो प्रर्ानवि व्यनि को प्रनिष्ठान के र्ीिर या

ननकटिम संर्ानवि स्िान पर समान वेिन और अन्य लार्ों पर वैकनल्पक रोजगार प्रिान नकया जाएगा, नसवाय उस क्षेत्र के नजसके नलए ऐसा आिेश जारी नकया गया है।

(2) यनि नकसी आिेश द्वारा प्रनिष्ठान का पूरा या उसका कोई र्ाग पूरी िरह से बंि कर निया जािा है, िो ननयोिा या अनधर्ोगी का यह कियव्य होगा नक वह प्रर्ानवि श्रनमकों

को वेिन संनहिा, 2019 (केंद्रीय अनधननयम संख्या 29, 2019) के अनुसार उन निनों की संख्या के नलए वेिन का र्ुगिान करे, नजिने निनों के नलए प्रनिष्ठान बंि रहा।

36 धारा 42 की उपधारा (1) के अंतर्गत "भचभकत्सा अभधकारी" की भनयुभक्त-

नकसी र्ी व्यनि को "नचनकत्सा अनधकारी" के रूप में िब िक ननयुि नहीं नकया जाएगा, जब िक नक उसके पास राष्ट्रीय नचनकत्सा आयोग अनधननयम, 2019 (2019 का

30) में पररर्ानर्ि कोई मान्यिा प्राप्त नचनकत्सा योग्यिा न हो और जो

खंड (एम) में पररर्ानर्ि र्ारिीय नचनकत्सा रनजस्टर और धारा (2) के खंड (v) और उि अनधननयम की धारा 35, 36, 37 और 40 में पररर्ानर्ि राज्य नचनकत्सा रनजस्टर

में नामांनकि न हो।

37 धारा 42 की उपधारा (2) के अंतर्गत “भचभकत्सा अभधकारी” के कतगव्य:-

(1) “नचनकत्सा अनधकारी” संनहिा की धारा 2 की उपधारा (1) के खंड (ज़ेडए) में नननियष्ट खिरनाक प्रनियाओं में लगे कारखाने, धारा 82 के अंिगयि घोनर्ि खिरनाक

कायों और ऐसे प्रनिष्ठान में श्रनमकों की परीक्षा और प्रमार्न करेगा जहाँ खिरनाक पिािों का संचालन, र्ंडारर् या उपयोग नकया जािा है;

(2) या नकसी ऐसे प्रनिष्ठान या प्रनिष्ठानों के वगय का नचनकत्सा पययवेक्षर् करेगा, जहाँ नकसी प्रनिया की कनठन प्रकृनि या कायय की खिरनाक नस्िनि के कारर् पुरानी व्यावसानयक

[PART IV

DELHI GAZETTE : EXTRAORDINARY

13

बीमारी के मामले उत्पन्न हुए हों;

(3) नकसी ऐसे प्रनिष्ठान या प्रनिष्ठानों के वगय या प्रनिष्ठानों के नववरर् के संबंध में कायय करेगा, जहाँ संचालन से उसमें काययरि नकसी व्यनि या व्यनियों के वगय के स्वास््य को

क्षनि पहुंचने का कोई जोनखम शानमल हो;

(4) नकसी प्रनिष्ठान या प्रनिष्ठानों के वगय के नलए व्यावसानयक स्वास््य सवेक्षर् करना, जहाँ संनहिा की िीसरी अनुसूची में ननधायररि बीमारी के मामले उत्पन्न हुए हों या बीमाररयों

का प्रचलन हो।

(5) "नचनकत्सा अनधकारी" नकसी प्रनिष्ठान में रोजगार के नलए नकशोर की आयु का आकलन करने और नफटनेस प्रमार् पत्र जारी करने के नलए उसकी जांच करेगा।

ध्याय-8

मभहिाओं के रोजर्ार से संबंभधत भिशेष प्रािधान

38 धारा 43 के अंतर्गत प्रभतष्ठान में मभहिाओं का भनयोजन -

ननयोिा ननम्ननलनखि कायय-नस्िनियां सुनननिि करेगा, अिायि्:-

1. मनहला कमयचारी संबंधी मामलों में उसकी सहमनि ली जाएगी;

2. नकसी र्ी मनहला के ननयोजन में सामानजक सुरक्षा संनहिा, 2020 (2020 का 36) के अंिगयि ननधायररि मािृत्व लार् प्रावधानों की अनिेखी नहीं की जाएगी;

3. मनहला कमयचारी को उसके ननवास से लाने और प्रनिष्ठान िक छोडने और वापस लाने के नलए पयायप्त पररवहन सुनवधाएँ प्रिान की जाएँगी;

4. काययस्िल पर मनहला कमयचाररयों के नलए शौचालय, वाशरूम, पेयजल, चेंनजंग रूम जैसी मूलर्ूि सुनवधाएं होनी चानहए और उनके प्रवेश और ननकास से संबंधित

मागग सुनवधाजनक और अच्छी िरह से प्रकानशि होना चानहए;

5. ऐसी संस्िापना में जहां ऐसी मनहला कमयचारी काययरि हैं शौचालय, वाशरूम और पेयजल की सुनवधाएं काययस्िल के पास होनी चानहए;

6. काययस्िल पर सुरनक्षि, संरनक्षि और स्वस्ि कायय पररनस्िनियाँ प्रिान करें िानक नकसी र्ी मनहला

कमयचारी को उसके रोजगार के संबंध में कोई असुनवधा न हो;

7. काययस्िल पर एक से अनधक मनहला कमयचारी ड्यूटी पर होंगी;

8. मनहला कमयचाररयों की िैनािी रोटेशन के आधार पर होनी चानहए;

9. मनहला कमयचारी के काययस्िल पर सीसीटीवी कैमरे लगाए जाने चानहए;

10. जहाँ र्ी आवश्यक हो, वहाँ िेच सुनवधा प्रिान की जानी चानहए;

11. रानत्र पाली और ननयनमि पाली में काम करने वाली मनहला कमयचाररयों को अपने प्रनिनननधयों के माध्यम से ननयोिा के साि आठ सप्ताह में एक बार नशकायि निवस के

रूप में बैठक करनी होगी और

ननयोिा नशकायिों का समाधान करने का प्रयास करेगा;

12. ननयोिा रानत्र पाली के िौरान काययरि मनहला कमयचाररयों के नववरर् के बारे में ननरीक्षक-सह-सुनवधाकिाय को छमाही ररपोटय र्ेजेगा;

13. ननयोिा मनहला कमयचारी के काययस्िल पर मनहला सुरक्षा गाडय िैनाि करेगा;

14. काययस्िल पर मनहलाओं का यौन उत्पीडन (रोकिाम, ननर्ेध और ननवारर्) अनधननयम, 2013 (2013 का 14) के प्रावधानों का, जो प्रनिष्ठानों पर लागू हैं, पालन

नकया जाएगा।

अध्याय-9

ठेका िभमकों और अंतर-राज्यीय प्रिाभसयों, िभमकों आभि के भिए भिशेष प्रािधान

िार्-I

अनुबंभधत िभमक

39 धारा 47 की उपधारा (3) के अंतर्गत िाइसेंस की शतें- धारा 47 की उपधारा (1) के अंिगयि जारी लाइसेंस ननम्ननलनखि शिों के अधीन होगा, अिायि्: -

(i) लाइसेंस अहस्िांिरर्ीय होगा;

(ii) प्रनिष्ठान में ठेका श्रनमक/प्रवासी कामगार के रूप में ननयोनजि कामगारों की संख्या, नकसी र्ी निन, लाइसेंस में नननियष्ट अनधकिम संख्या से अनधक नहीं होगी;

(iii) ननयमों में निए गए प्रावधानों को छोडकर, लाइसेंस प्रिान करने/नवीनीकरर् के नलए र्ुगिान नकया गया शुल्क वापस नहीं नकया जाएगा;

(iv) ठेकेिार द्वारा श्रनमकों को िेय मजिूरी की िरें मजिूरी संनहिा, 2019 (केंद्रीय अनधननयम संख्या 29, 2019) और उसके अधीन बनाए गए ननयमों के अनुसार होंगी;

(v) यनि ठेकेिार द्वारा ननयोनजि श्रनमक प्रनिष्ठान के ननयोजक द्वारा प्रत्यक्षििः ननयोनजि श्रनमक के समान या समान प्रकार के कायय करिा है, िो ठेकेिार के श्रनमकों की मजिूरी

िरें, अवकाश, कायय के घंटे और सेवा की अन्य शिें वही होंगी जो प्रनिष्ठान के ननयोजक द्वारा प्रत्यक्षििः समान या समान प्रकार के कायय पर ननयोनजि श्रनमकों पर लागू होिी हैं;

बशिे नक कायय के प्रकार के संबंध में नकसी र्ी असहमनि की नस्िनि में उसका ननर्य ननरीक्षक-सह-सुनवधाप्रिािा द्वारा नकया जाएगा, नजसका ननर्य अंनिम होगा;

14

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(vi) कायय के घंटे व्यावसानयक सुरक्षा, स्वास््य एवं काययिशा संनहिा, 2020 की धारा 25 के अंिगयि बनाए गए ननयमों के अनुरूप होंगे।

(vii) व्यावसानयक सुरक्षा, स्वास््य एवं काययिशा संनहिा, 2020 की धारा 43 और उसके अंिगयि बनाए गए ननयमों के अनुसार, मनहलाओं को नकसी र्ी ठेकेिार द्वारा सुबह

6 बजे से पहले या शाम 7 बजे के बाि ननयोनजि नकया जा सकिा है।

(viii) लाइसेंसधारी, श्रनमकों की संख्या या कायय की नस्िनियों में नकसी र्ी पररवियन की सूचना लाइसेंनसंग प्रानधकारी को िेगा;

(ix) सर्ी श्रनमकों (ननमायर् कायय में लगे/िैननक वेिन पाने वाले श्रनमकों को छोडकर) को मजिूरी का र्ुगिान हर महीने केवल खािा-र्ुगिान चेक/ईसीएस के माध्यम से नकया

जाना चानहए। मजिूरी का र्ुगिान मुख्य ननयोिा के प्रनिनननध द्वारा नकया जाना चानहए और उसके द्वारा नवनधवि सत्यानपि नकया जाना चानहए;

(x) यनि ठेकेिार का ठेका कमयचारी प्रधान ननयोिा के पररसर में काम कर रहा है, िो शौचालय, वाशरूम, पेयजल, आवश्यकिानुसार स्नान की सुनवधा, चेंनजंग रूम, प्रािनमक

उपचार बॉक्ट्स, कैंटीन और िेच जैसी सुनवधाएँ या सुख-सुनवधाएँ प्रिान करना प्रधान ननयोिा की नज़म्मेिारी होगी;

(xi) अन्य सर्ी सुनवधाएँ और अनधकार ठेकेिार द्वारा प्रिान नकए जाएँगे;

(xii) वह ठेका कायय आिेश प्राप्त होने के पंद्रह निनों के र्ीिर ठेका कायय आिेश के नववरर् और ननयम 45 के अनुसार सूनचि करेगा;

(xiii) प्रत्येक ठेका श्रनमक/प्रवासी कमयचारी व्यावसानयक सुरक्षा, स्वास््य और कायय नस्िनियां संनहिा, 2020 (2020 का 37) और उसके अधीन बनाए गए ननयमों में

ननधायररि र्त्ते, लार्, सुनवधाएँ आनि का हकिार होगा;

(xiv) सर्ी ठेका श्रनमकों को सामानजक सुरक्षा संनहिा, 2020 के संबंनधि प्रावधानों के अनुसार प्रयोज्यिा के अधीन, ईपीएफओ और ईएसआईसी का सिस्य बनाया जाएगा।

(xv) प्रत्येक ठेकेिार को ठेका कायय आिेश प्राप्त होने के पंद्रह निनों के र्ीिर ठेका कायय आिेश के बारे में सूनचि करना होगा, नजसमें मुख्य ननयोिा का नाम, उस पररसर का

पिा जहाँ कायय नकया जा रहा है, ठेका कायय शुरू होने की निनि, उस कायय आिेश के िहि ननयोनजि ठेका श्रनमकों की संख्या, कायय आिेश की अवनध जैसे नववरर् शानमल

होंगे।

(xvi) लाइसेंस की एक प्रनि उस पररसर में प्रमुखिा से प्रिनशयि की जाएगी जहाँ ठेका कायय नकया जा रहा है; और

(xvii) ठेकेिार संनहिा के प्रासंनगक प्रावधानों का पालन करने के नलए उत्तरिायी होगा।

40 धारा 48 की उपधारा (1) के अंतर्गत ठेकेिार िाइसेंस जारी करना:- (1) लाइसेंस जारी करने के नलए आवेिन श्रम नवर्ाग, सरकार के पोटयल पर लाइसेंनसंग प्रानधकारी

को फॉमय-16 में नकया जाएगा;

(2) उप-ननयम (1) में नननियष्ट प्रत्येक आवेिन के साि नीचे िी गई अनुसूची में नननियष्ट िर पर शुल्क और प्रनिर्ूनि र्ी संलग्न होगी;

शुल्क अनुसूची

(अनुबंध िम के भिए िाइसेंस)

ठेकेिार द्वारा भनयोभजत भकए जाने िािे

िभमकों की संख्या

िाइसेंस शुल्क

प्रभत िषग

(रु.)

जमा की जाने िािी प्रभतिूभत राभश

(रु.)

50 से 100

5000

50000

101-150

10000

100000

151-200

15000

150000

201-250

20000

200000

251-500

25000

250000

501-750

30000

300000

751-1000

40000

400000

1001-1500

50000

500000

1501-2000

60000

600000

2000 से ऊपर

75000

750000

(3) उप-ननयम (2) के अंिगयि अपेनक्षि र्ुगिान पोटयल के माध्यम से नकया जाएगा, जो सरकार द्वारा समय-समय पर नननियष्ट लेखा शीर्य में कोर्ागार में जमा नकया जाएगा;

(4) लाइसेंनसंग प्रानधकारी 30 निनों की अवनध के र्ीिर प्रपत्र-17 में लाइसेंस जारी करेगा। यनि ननधायररि समय के र्ीिर कोई त्रुनट नहीं बिाई जािी है, िो लाइसेंस नवीनीकृि

माना जाएगा।

41 धारा 48 के अंतर्गत िाइसेंस का निीकरण; (1) प्रत्येक ठेकेिार, नजसे ननयम 40 के अंिगयि लाइसेंस जारी नकया गया है, लाइसेंस की समानप्त के कम से कम 30 निन के

र्ीिर, परंिु 60 निन से पहले नहीं, पोटयल पर लाइसेंनसंग प्रानधकारी को फॉमय-16 में लाइसेंस के नवीकरर् के नलए आवेिन करेगा।

[PART IV

DELHI GAZETTE : EXTRAORDINARY

15

(2) लाइसेंस प्रानधकारी आवेिन प्रानप्त की निनि से 30 निन के र्ीिर फॉमय-18 में लाइसेंस का नवीकरर् करेगा। यनि ननधायररि समय के र्ीिर कोई त्रुनट नहीं बिाई जािी है,

िो लाइसेंस का नवीकरर् कर निया जाएगा।

(3) लाइसेंस के नवीकरर् के नलए देय शुल्क, ननयम 40 के अंिगयि लाइसेंस प्रिान करने के समान ही होंगे। परंिु यनि नवीकरर् के नलए आवेिन उप-ननयम (2) में नननियष्ट

समय के र्ीिर प्राप्त नहीं होिा है, िो ऐसे नवीकरर् के नलए पच्चीस प्रनिशि का अनिररि शुल्क िेय होगा।

42 धारा 48 के अंतर्गत िाइसेंस में संशोधन; (1) प्रत्येक ठेकेिार, नजसे ननयम 40 के अंिगयि लाइसेंस जारी नकया गया है या ननयम 41 के अंिगयि नवीनीकृि नकया गया है,

लाइसेंस में संशोधन के नलए लाइसेंनसंग प्रानधकारी को पोटयल पर फॉमय-19 में नकसी र्ी पररवियन से पहले या ऐसे पररवियन के िीन निनों के र्ीिर आवेिन करना होगा।

(2) लाइसेंस में संशोधन के नलए शुल्क, ननयम 40 के अंिगयि अनुसूची के अनुसार आवश्यक प्रनिर्ूनि और शुल्क के अंिर के बराबर होगा;

(3) लाइसेंस प्रानधकारी आवेिन प्राप्त होने की निनि से 30 निनों के र्ीिर फॉमय-18 में लाइसेंस में संशोधन करेगा। यनि ननधायररि समय के र्ीिर कोई िोर् नहीं बिाया जािा

है, िो लाइसेंस संशोनधि माना जाएगा।

43 धारा 48 की उपधारा (4) के अंतर्गत ठेकेिार का उत्तरिाभयत्ि- (1) ठेकेिार द्वारा श्रनमकों को िेय मजिूरी की िरें, मजिूरी संनहिा, 2019 के अंिगयि ननधायररि िरों से

कम नहीं होंगी और जहाँ िरें समझौिे, ननपटान या पंचाट द्वारा ननधायररि की गई हों, वहाँ ननधायररि िरों से कम नहीं होंगी।

(2) यनि ठेकेिार द्वारा ननयोनजि श्रनमक प्रनिष्ठान के प्रधान ननयोजक द्वारा प्रत्यक्षििः ननयोनजि श्रनमक के समान या समान प्रकार का कायय करिे हैं, िो ठेकेिार के श्रनमकों की

मजिूरी िरें, अवकाश, कायय के घंटे और सेवा की अन्य शिें वही होंगी जो प्रनिष्ठान के प्रधान ननयोजक द्वारा प्रत्यक्षििः उसी या समान प्रकार के कायय पर ननयोनजि श्रनमकों पर

लागू होिी हैं। यनि कायय समान प्रकार का है या नहीं, इस संबंध में कोई नववाि हो, िो मामला ननरीक्षक-सह-सुनवधाप्रिािा को र्ेजा जाएगा, नजसका ननर्य अंनिम होगा।

(3) अन्य मामलों में, ठेकेिार के श्रनमकों की मजिूरी िरें, अवकाश, कायय के घंटे और सेवा की शिें संनहिा और उसके अंिगयि बनाए गए ननयमों के अनुसार होंगी।

(4) सर्ी ठेका श्रनमकों को सामानजक सुरक्षा संनहिा, 2020 के संबंनधि प्रावधानों के अनुसार प्रयोज्यिा के अधीन, ईपीएफओ और ईएसआईसी का सिस्य बनाया जाएगा।

(5) ठेकेिार श्रनमकों की संख्या या कायय की शिों में नकसी र्ी बिलाव की सूचना लाइसेंनसंग प्रानधकरर् को इलेक्ट्रॉननक रूप से िेगा।

(6) धन वापसी के नकसी र्ी आवेिन का, जहाँ िक संर्व हो, आवेिन प्रानप्त के 30 निनों के र्ीिर ननपटारा नकया जाएगा।

44 धारा 48 के अंतर्गत प्रभतिूभत जमा राभश की िापसी;- (1) लाइसेंस की अवनध समाप्त होने पर, ठेकेिार, यनि वह अपने लाइसेंस का आगे नवीनीकरर् नहीं कराना चाहिा

है, िो अपने द्वारा जमा की गई प्रनिर्ूनि रानश (बैंक गारंटी के रूप में) की वापसी के नलए लाइसेंनसंग प्रानधकारी को इलेक्ट्रॉननक रूप से आवेिन कर सकिा है, साि ही लाइसेंस

की प्रनि, कायय पूरा होने की सूचना और बैंक नववरर् र्ी िे सकिा है नजसमें रानश वापस की जानी है।

(2) यनि लाइसेंनसंग प्रानधकारी इस बाि से संिुष्ट है नक लाइसेंस की शिों का कोई उल्लंघन नहीं हुआ है या प्रनिर्ूनि जमा रानश या उसके नकसी र्ाग को जब्ि करने का कोई

आिेश नहीं है, िो वह आवेिक को प्रनिर्ूनि जमा रानश वापस करने का ननिेश िेगा।

(3) यनि ठेकेिार की प्रनिर्ूनि जमा रानश के नकसी र्ी नहस्से को जब्ि करने का कोई आिेश है, िो जब्िी की जाने वाली रानश प्रनिर्ूनि जमा रानश से काट ली जाएगी, और

शेर् रानश, यनि कोई हो, ठेकेिार को वापस कर िी जाएगी।

45 धारा 50 के अंतर्गत कायग आिेश की सूचना और सूचना िेने की समय-सीमा-(1) प्रत्येक ठेकेिार, अनुबंध कायय आिेश प्राप्त होने के पंद्रह निनों के र्ीिर, अनुबंध कायय

आिेश के बारे में सूचना िेगा नजसमें मुख्य ननयोिा का नाम, उस पररसर का पिा जहाँ कायय नकया जा रहा है, अनुबंध कायय प्रारंर् होने की निनि, उस कायय आिेश के अंिगयि

ननयोनजि ठेका श्रनमकों की संख्या, कायय आिेश की अवनध जैसे नववरर् शानमल होंगे।

(2) सूचना एवं कायय आिेश का नववरर् इलेक्ट्रॉननक रूप से श्रम नवर्ाग, राष्ट्रीय राजधानी क्षेत्र निल्ली सरकार के लाइसेंनसंग प्रानधकारी को र्ेजी जाएगी।

46 धारा 50(2) के अंतर्गत िाइसेंस का भनरसन या भनिंबन- िाइसेंस के भनिंबन या भनरस्तीकरण के भिए भनम्नभिभखत प्रभिया का पािन भकया जाएर्ा, अर्ाात्:

- (1) लाइसेंनसंग प्रानधकारी ठेकेिार को उसके पंजीकृि ईमेल या पंजीकृि डाक के माध्यम से नलनखि रूप में कारर् बिाओ नोनटस जारी करेगा। उसके पंजीकृि ईमेल या

पंजीकृि डाक के माध्यम से नोनटस की िामील ठेकेिार को िामील मानी जाएगी।

(2) ठेकेिार उपधारा (1) के अंिगयि निए गए नोनटस का उत्तर नोनटस में नननियष्ट समय-सीमा के र्ीिर िेगा।

(3) लाइसेंनसंग प्रानधकारी ऐसे उत्तर पर नवचार करने और आवश्यक समझी जाने वाली जांच करने के बाि, उत्तर प्राप्त होने के 30 निनों के र्ीिर आिेश पाररि करेगा।

47 धारा 52 की उपधारा (1) के अंतर्गत अपीि;- संनहिा की धारा 52 की उपधारा (1) के अंिगयि अपीलीय प्रानधकारी श्रम आयुि, राष्ट्रीय राजधानी क्षेत्र निल्ली सरकार

होंगे।

48 धारा 55(1) के अंतर्गत मजिूरी के िुर्तान का उत्तरिाभयत्ि -

16

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(1) ठेकेिार मजिूरी अवनध ननधायररि करेगा नजसके संबंध में मजिूरी िेय होगी और कोई र्ी मजिूरी अवनध एक माह से अनधक नहीं होगी।

(2) मजिूरी का र्ुगिान उस मजिूरी अवनध के अंनिम निन के बाि सािवें निन की समानप्त से पहले नकया जाएगा नजसके संबंध में मजिूरी िेय है।

(3) मजिूरी का नविरर् केवल बैंक हस्िांिरर् या इलेक्ट्रॉननक माध्यम से नकया जाएगा।

49 धारा 56 के अंतर्गत ठेका िभमकों को अनुिि प्रमाण पत्र; - प्रत्येक ठेकेिार, ठेका श्रनमक द्वारा मांगे जाने पर, प्रपत्र-20 में अनुर्व प्रमार् पत्र जारी करेगा नजसमें ऐसे

ठेका श्रनमक द्वारा की गई अवनध, नकए गए कायय, नवनर्न्न क्षेत्रों में प्राप्त अनुर्व का नववरर् निया जाएगा।

50 धारा 57 की उप-धारा (2) के खंड (ख) के अंतर्गत ठेका िभमकों के भनयोजन का प्रभतषेध: (1) यनि यह प्रश्न उठिा है नक नकसी प्रनिष्ठान की कोई गनिनवनध मुख्य

गनिनवनध है या नहीं, िो पीनडि पक्ष, कारर् बिािे हुए, सहायक िस्िावेज के साि, ननम्ननलनखि नववरर्ों के साि, पोंद्रह निि के अोंिि सरकार को आवेिन कर सकिा

है:

क) पीनडि पक्ष का नाम:

ख) पत्राचार का पिा:

ग) नशकायि का नववरर्:

घ) िावे के कारर्:

ङ) संलग्न िस्िावेजों का नववरर्:

पीनडि पक्ष के हस्िाक्षर

(2) सिकाि एक िानमि प्रानधकािी नियुक्त किेगी।

(3) िानमि प्रानधकािी आवेिि प्राप्त ह िे की िािीख से िीस निि ों के भीिि जाोंच किेगा औि सिकाि क रिप टम िेगा।

(4) सिकाि उप-नियम (2) में निनिमष्ट प्रानधकारिय ों से प्राप्त रिप टम के आधाि पि िीस निि ों के भीिि आिेश पारिि किेगी।

िार्-II

अंतर-राज्यीय प्रिासी िभमक

51 धारा 61 के अंतर्गत यात्रा ित्ता - भनयोक्ता, अंतरागज्यीय प्रिासी िभमक और उसके पररिार के प्रत्येक आभित सिस्य को रेिर्ाडी (भद्वतीय िेणी शयनयान से कम

नहीं) या बस या भकसी अन्य यात्री पररिहन साधन द्वारा रोजर्ार के स्र्थान से र्ृह राज्य में भनिास स्र्थान तक आने-जाने की यात्रा का ककराया यात्रा के

भिए एकमुश्त राभश का िुर्तान भनम्नभिभखत भस्र्थभतयों में करेर्ा, अर्थागत्:

(1) यनि उसने नपछले बारह महीनों में संबंनधि प्रततष्ठान (नों) में कम से कम 180 निनों की अवनध िक काम नकया हो;

(2) अंिरायज्यीय प्रवासी श्रनमक को यात्रा र्त्ता बारह महीनों में एक बार निया जाएगा।

(3) यनि अंिरायज्यीय प्रवासी श्रनमक द्वारा रोजगार अवनध के मध्य में ननयोिा बिल निया जािा है और उसने अपने पूवय ननयोिा से यात्रा र्त्ता नहीं नलया है, िो अंिरायज्यीय

प्रवासी श्रनमक द्वारा निए जाने वाले प्रमार्-पत्र के आधार पर, वह ननयोिा जहां अंिरायज्यीय प्रवासी श्रनमक वियमान में काययरि है और ऐसे श्रनमक ने पूवय ननयोिा के साि नबिाई

गई अवनध सनहि नवगि बारह महीनों में एक सौ अस्सी निन पूरे कर नलए हैं, िो ननयोिा यात्रा र्त्ता िेगा।

(4) ननयोिा यात्रा के िौरान र्ोजन के नलए प्रनि पररवार सिस्य प्रनिनिन एक सौ रुपये की एकमुश्ि रानश का र्ुगिान करेगा।

52 धारा 63 के अंतर्गत टोि-फ्री हेल्पिाइन नंबर: - अंिरराज्यीय प्रवासी श्रनमकों के प्रश्नों और नशकायिों के समाधान के नलए सरकार के श्रम नवर्ाग द्वारा एक टोल-फ्री

हेल्पलाइन नंबर प्रिान नकया जाएगा।

53 धारा 64 के अंतर्गत अंतरराज्यीय प्रिासी िभमकों का अध्ययन: - अंिरराज्यीय प्रवासी श्रनमकों का अध्ययन

सामानजक-आनियक अध्ययन करने में नवशेर्ज्ञिा रखने वाले प्रनिनष्ठि संगठन या संस्िान के माध्यम से नकया जाएगा।

54 धारा 66 (2) के अंतर्गत समझौते का प्रारूप- दृश्य-श्रव्य काययिम के ननमायिा और कमयचारी के बीच नकया जाने वाला समझौिा प्रपत्र-21 में होगा।

55 धारा 66(3) के अधीन समझौते का प्रस्तुतीकरण- दृश्य-श्रव्य काययिम के ननमायिा द्वारा समझौिे की प्रनि इलेक्ट्रॉनिक रूप से मुख्य ननरीक्षक-सह-सुनवधाप्रिािा को

र्ेजी जाएगी।

56 धारा 66 की उपधारा (4) के खंड (vii) के अंतर्गत भििाि समाधान तंत्र -

सुलह अनधकारी या न्यायानधकरर् को नववािों को संिनर्यि करने की प्रनिया औद्योनगक संबंध संनहिा, 2020 (2020 का केंद्रीय अनधननयम 35) और उसके अंिगयि बनाए

गए ननयमों के अनुरूप होगी।

िार्-III

फैक्‍टररयां

57 भनभमगत भकए जाने िािे कारखानों या मौजूिा कारखाना ििनों के पररिधगन या पररितगन या भिस्तार के भिए, धारा 79 की उपधारा (1) के अंतर्गत एमसीडी

पोटगि की एकि भखडकी प्रणािी के माध्यम से अनुमोिन के भिए, प्रस्ताभित ििन मानभचत्र प्रस्तुत करना; -

[PART IV

DELHI GAZETTE : EXTRAORDINARY

17

(1) मुख्य ननरीक्षक-सह-सुनवधाकिाय की पूवय नलनखि अनुमनि के नबना नकसी स्िान का उपयोग कारखाने के स्िल के नलए नहीं नकया जाएगा या अनधसूनचि कंफनमिंग औद्योनगक

क्षेत्रों में नकसी कारखाने में नकसी र्ी र्वन का ननमायर्, पुनननयमायर्, नवस्िार कारखाने के रूप में या कारखाने के र्ाग के रूप में उपयोग में नहीं नलया जाएगा, चाहे वे निल्ली के

मास्टर प्लान में समय-समय पर पररर्ानर्ि सावयजननक संस्‍िा सेवाओं में लगे कारखाने हो, या निल्ली के कंफनमिंग/नोन-कंफनमिंग क्षेत्र हों।

(2) नकसी र्ी र्वन का ननमायर्, नवस्िार या पररवियन नहीं नकया जाएगा और उसे कारखाने के रूप में उपयोग में िब िक नहीं नलया जाएगा, जब िक नक ऐसे र्वनों के संबंध

में योजनाओं को मुख्य ननरीक्षक-सह-सुनवधाकिाय द्वारा अनुमोनिि नहीं नकया गया हो।

(3) नननमयि नकए जाने वाले कारखानों या मौजूिा कारखाना र्वनों के पररवधयन, पररवियन या नवस्िार संबंधी प्रस्िानवि र्वन योजनाओं के नलए ऑनलाइन आवेिन, निल्ली

नगर ननगम की एकल नखडकी प्रर्ाली के पोटयल के माध्यम से प्रस्िुि नकए जाएंगे और उनके साि नवननमायर् प्रनिया का प्रवाह चाटय, मौजूिा र्वन के नवध्वंस का वचन या खाली

र्ूखंड प्रमार् पत्र, जो र्ी लागू हो, संलग्‍न नकया जाएगा। प्रस्िानवि र्वन योजना में नवशेर् रूप से अनग्नशमन के नलए पयायप्त ऊपरी जल प्रावधान और र्वन की योजना, ऊंचाई

और आवश्यक िॉस-सेक्ट्शन शानमल होंगे, जो आग लगने की नस्िनि में बचने के साधनों को स्पष्ट रूप से िशायिे हों।

(4) आवेिन प्राप्त होने पर, यनि मुख्य ननरीक्षक-सह-सुनवधाकिाय संिुष्ट हो जािा है नक प्रस्िानवि योजना उप-ननयम (3) के अनुसार है, िो उसे अनुमोनिि नकया जाएगा, अन्यिा

अस्वीकृि कर निया जाएगा।

(5) इन ननयमों के लागू होने से पहले कारखाना अनधननयम, 1948 के प्रावधानों के िहि पहले से अनुमोनिि योजनाओं को इन ननयमों के िहि अनुमोनिि माना जाएगा।

58 धारा 79 की उपधारा (1) के अंतर्गत सामान्य िाइसेंस या कारखाना चिाने के भिए िाइसेंस प्राप्त करने के उद्देश्य से कारखाने के रूप में उपयोर् भकए जाने िािे

मौजूिा ििन का नक्शा प्रस्तुत करना;-

(1) मुख्य ननरीक्षक-सह-सुनवधाकिाय, पोटयल के माध्यम से निल्ली के अनधसूनचि कंफमय औद्योनगक क्षेत्रों में फैक्ट्टरी के रूप में उपयोग नकए जाने वाले मौजूिा र्वन का नक्ट्शा

या समय-समय पर अनधसूनचि निल्ली मास्टर प्लान में पररर्ानर्ि फैक्ट्टरी के रूप में उपयोग नकए जाने वाले या सावयजननक संस्‍िा सेवाओं में लगे पररसर का लेआउट/प्लान

प्रस्िुि करने की मांग कर सकिा है, चाहे वह कंफमय/गैर- कंफमय क्षेत्र में ही क्ट्यों न हों।

(2) ऐसी र्वन योजना में ननम्ननलनखि नववरर् शानमल होंगे:-

(क) कारखाने का स्िल और आस-पास के र्वन सनहि आसपास का क्षेत्र, और र्वन की ऊँचाई एवं आवश्यक िॉस-सेक्ट्‍शन, नजसमें प्राकृनिक प्रकाश, वायु-संचार और आग

लगने की नस्िनि में बचने के साधनों से संबंनधि सर्ी प्रासंनगक नववरर् िशायए गए हों।

(ख) योजना में संयंत्र और मशीनरी, गनलयारों और मागों का स्िान र्ी स्पष्ट रूप से िशाया जाएगा; और

(ग) ऐसे अन्य नववरर् नजनकी मुख्य ननरीक्षक-सह-सुनवधाकिाय को आवश्यकिा हो।

59 धारा 79 की उपधारा (1) के अंतर्गत कारखाना चिाने के भिए िाइसेंस प्रिान करना:-

(1) प्रत्येक कारखाने के अनधर्ोगी को पोटयल के माध्यम से आवश्यक जानकारी के साि फॉमय-22 में आवेिन प्रस्िुि करना होगा, नजसमें अनुसूची के अनुसार आवश्यक

शुल्क, मौजूिा र्वन योजना और

मुख्य ननरीक्षक-सह-सुनवधाप्रिािा या संनहिा की धारा 34 के अंिगयि ननयुि और सरकार द्वारा इस संबंध में नवशेर् रूप से अनधकृि नकसी अन्य अनधकारी द्वारा अपेनक्षि अन्य

िस्िावेज और नववरर् शानमल होंगे।

(2) लाइसेंस के नलए एक, पांच या िस वर्य के नलए आवेिन नकया जा सकेगा। लाइसेंस शुल्क का ननधायरर्, वर्ों की संख्या को लाइसेंस के पंजीकरर् के नलए िेय शुल्क से

गुर्ा करके नकया जाएगा। एक बार र्ुगिान नकया गया लाइसेंस शुल्क नकसी र्ी पररनस्िनि में वापस नहीं नकया जाएगा।

(3) पररसर की उपयुििा के ननधायरर् हेिु सत्यापन के पिाि, लाइसेंस मुख्य ननरीक्षक-सह-सुनवधाप्रिािा या संनहिा की धारा 34 के अंिगयि ननयुि और सरकार द्वारा इस संबंध

में नवशेर् रूप से अनधकृि नकसी अन्य अनधकारी द्वारा पोटयल के माध्यम से फॉमय-16 में प्रिान नकया जाएगा।

(4) यनि िीस निनों के र्ीिर लाइसेंस प्रिान नहीं नकया जािा है या आवेिक को कोई आिेश संसूनचि नहीं नकया जािा है, िो ऐसा लाइसेंस प्रिान नकया गया माना जाएगा।

18

DELHI GAZETTE : EXTRAORDINARY

PART IV]

शुल्क अनुसूची

(कारखानों के भिए)

संस्‍िानपि हॉसय पावर

िषग के िौरान भकसी िी भिन भनयोभजत िभमकों की अभधकतम संख्‍या

20 तक

21 से

50

51 से 100

101 से

से 250

251 से 500

501 से

750

751 से

1000

1000 से ऊपर

रु.

रु.

रु.

रु.

रु.

रु.

रु.

रु.

शून्य

200

500

1000

2500

4000

7500

10000

12500

10 तक

500 1000

1200

3000

6000

9000

12000

15000

10 से ऊपर और 50 तक

1000

1500

2000

5000

10000

15000

20000

25000

50 से ऊपर और 100 तक

2000

2500

3000

7500

15000

22500

30000

37500

100 से ऊपर

3000

4000

5000

10000

20000

30000

40000

50000

(5) कोई र्ी अनधर्ोगी या ननयोिा जो धारा 119 के िहि कारखाने के संबंध में और धारा 48 के िहि ठेका श्रनमकों को ननयुि करने के नलए सामान्य लाइसेंस प्राप्त करने

का इच्छुक है, उसे फॉमय-22 में आवेिन करना होगा और मुख्य ननरीक्षक-सह-सुनवधाप्रिािा द्वारा फॉमय-23 में सामान्य लाइसेंस प्रिान नकया जाएगा।

(6) सामान्य लाइसेंस जारी करने के नलए शुल्क, कारखाना और ठेका श्रनमकों के नलए अलग-अलग ननयमों के िहि शुल्क अनुसूची में प्रिान की गई फीस का योग होगा।

60 धारा 79 की उपधारा (1) के अंतर्गत कारखाना िाइसेंस का निीनीकरण; -

(1) लाइसेंस के नवीनीकरर् के नलए एक, पाँच या िस वर्य की अवनध के नलए लाइसेंस की समानप्त के िीस निन पहले फॉमय-22 में पोटयल के माध्यम से आवेिन नकया जाएगा।

लाइसेंस शुल्क, ननयम 59 के अंिगयि ननधायररि शुल्क अनुसूची के अनुसार एक वर्य के नलए लाइसेंस के नवीनीकरर् हेिु िेय शुल्क को गुर्ा करके वर्ों की संख्या के बराबर

होगा। एक बार र्ुगिान नकया गया लाइसेंस शुल्क नकसी र्ी पररनस्िनि में वापस नहीं नकया जाएगा।

(2) यनि लाइसेंस की समानप्त निनि से िीस निन पहले अपेनक्षि शुल्क सनहि लाइसेंस के नवीनीकरर् हेिु आवेिन पोटयल पर प्राप्त नहीं होिा है, िो सर्ी संबंनधि व्यपगि वर्ों

के शुल्क से पच्चीस प्रनिशि अनधक नवलंब शुल्क िेय होगा।

(3) लाइसेंस का नवीनीकरर् मुख्य ननरीक्षक-सह-सुनवधाप्रिािा या संनहिा की धारा 34 के अंिगयि ननयुि और सरकार द्वारा इस संबंध में नवशेर् रूप से अनधकृि नकसी अन्य

अनधकारी द्वारा फॉमय-23 में नकया जाएगा।

(4) यनि लाइसेंस का नवीकरर् नहीं नकया जािा है या आवेिक को िीस निन के र्ीिर कोई आिेश संसूनचि नहीं नकया जािा है, िो ऐसा लाइसेंस नवीकृि माना जाएगा।

(5) सामान्य लाइसेंस जारी करने के नलए शुल्क की गर्ना, उन प्रनिष्ठानों के संयोजन के नलए पृिक ननयमों के अंिगयि ननधायररि शुल्क अनुसूची के अनुसार की जाएगी, नजनके

नलए सामान्य लाइसेंस मांगा गया है।

61 धारा 79 की उपधारा (1) के अंतर्गत कारखाना िाइसेंस में संशोधन -

(1) ननयम 59 के अंिगयि प्रिान नकया गया या ननयम 60 के अंिगयि नवीनीकृि लाइसेंस मुख्य ननरीक्षक-सह-सुनवधाप्रिािा या संनहिा की धारा 34 के अंिगयि ननयुि नकसी

अन्य अनधकारी द्वारा ननम्ननलनखि मामलों में प्रपत्र-23 में संशोनधि नकया जा सकिा है:

(i) कारखाने के नाम में पररवियन;

(ii) कारखाने के पिे में पररवियन;

(iii) अनधर्ोगी के नाम में पररवियन;

(iv) कारखाने के गठन में पररवियन;

(v) श्रनमकों की संख्या में पररवियन;

(vi) अश्वशनि में पररवियन;

(vii) नवननमायर् प्रनिया में पररवियन।

(2) कोई लाइसेंसधारी, जो अपने लाइसेंस में संशोधन कराना चाहिा है, उसे पोटयल पर प्रपत्र-22 में आवेिन प्रस्िुि करना होगा।

(3) लाइसेंस में संशोधन के नलए शुल्क पांच सौ रुपये प्रनि संशोधन ििा ननयम-59 में उपबंनधि शुल्क अनुसूची के अनुसार अपेनक्षि शुल्क के अंिर की रानश होगी।

(4) यनि लाइसेंस में संशोधन नहीं नकया जािा है या आवेिक को िीस निन के र्ीिर कोई आिेश संसूनचि नहीं नकया जािा है, िो ऐसा लाइसेंस संशोनधि समझा जाएगा।

62 धारा 79 की उपधारा (1) के अधीन कारखाना िाइसेंस का भनिंबन- मुख्य ननरीक्षक-सह-सुनवधाप्रिािा, संबंनधि लाइसेंसधारी को प्रस्िानवि कारयवाई के नवरुि कारर्

बिाने का उनचि अवसर िेने के पिाि्, नकसी र्ी लाइसेंस को ननलंनबि कर सकेगा, यनि वह इस बाि से संिुष्ट है नक लाइसेंस लाइसेंसधारी द्वारा धोखाधडी से या ि्यों के गलि

प्रस्िुिीकरर् से या नकसी अन्य नननियष्ट कारर् से प्राप्त नकया गया िा, और लाइसेंस के ऐसे ननलंबन पर, लाइसेंसधारी लाइसेंस शुल्क की वापसी का हकिार नहीं होगा।

63 धारा 80 के अंतर्गत कुछ पररभस्र्थभतयों में पररसर के स्िामी का िाभयत्ि -

जहां नकसी र्ी पररसर में, स्विंत्र या स्वििः पूर्य (नजसमें सर्ी सुनवधाएँ जैसे, प्रवेशद्वार, रसोई, स्नानघर नकसी िूसरे के साि साझेिारी में न हों), मंनजलों या ्लैटों को अलग-

अलग कारखानों के रूप में उपयोग के नलए अलग-अलग अनधर्ोनगयों को पट्टे पर निया जािा है, वहां पररसर का मानलक ननम्‍नांनकि के संबंध में संनहिा के प्रावधानों के नकसी

[PART IV

DELHI GAZETTE : EXTRAORDINARY

19

र्ी उल्लंघन के नलए इस िरह उत्तरिायी होगा, जैसे वह नकसी कारखाने का अनधर्ोगी या प्रबंधक हो:-

(i) शौचालय, मूत्रालय और वाशशंग एररया, जहां तक इन प्रयोजनों के शलए पानी की सामान्य आपूततग के रखरखाव

का संबंि है;

(ii) मानलक की मशीनरी और संयंत्र की बाड लगाना, जो नवशेर् रूप से नकसी अनधर्ोगी की अनर्रक्षा या उपयोग के नलए नहीं सौंपी गई है;

(iii) ्लैटों के िल िक पहुँचने के सुरनक्षि साधन, और सीनढयों और सामान्य मागों का रखरखाव और सफाई;

(iv) आग लगने की नस्िनि में सावधाननयां और वैकनल्पक आपािकालीन सीनढयों का प्रावधान;

(v) उत्तोलकों और नल्ट का रखरखाव; और

(vi) पररसर में प्रिान की गई नकसी र्ी अन्य सामान्य सुनवधाओं का रखरखाव

64 धारा 81 की उपधारा (1) के तहत कुछ पररसरों पर संभहता िार्ू करने की शभक्त;- नकसी र्ी पररसर के अनधर्ोगी को, जहाँ स्टील रीरोनलंग, पत्िर की िनशंग या

रासायननक कायों की नवननमायर् प्रनिया सामान्यििः की जािी है, ननयोनजि श्रनमकों की संख्या की परवाह नकए नबना लाइसेंस प्राप्त करना आवश्यक है और ऐसा पररसर एक

"कारखाना" माना जाएगा।

65 धारा 82 के अंतर्गत खतरनाक कायग -

(1) नकसी र्ी कारखाने में नकए जाने वाले ननम्ननलनखि कायय खिरनाक कायय घोनर्ि नकए जािे हैं: -

(i) वानिि जल का ननमायर् और उससे संबंनधि प्रनियाएँ;

(ii) िोनमयम, ननकल, कैडनमयम, जस्िा, िांबा, चांिी

या सोना जैसी धािुओं के अम्ल, क्षार या लवर् युि इलेक्ट्रोलाइट के उपयोग द्वारा धािु की वस्िुओं का नवद्युि अपघटनी लेपन या ऑक्ट्सीकरर्;

(iii) नवद्युि संचायकों का ननमायर् और मरम्मि;

(iv) कांच ननमायर्;

(v) धािुओं को पीसना या चमकाना;

(vi) सीसा और सीसे के कुछ यौनगकों का ननमायर् और उपचार;

(vii) खिरनाक पेरोनलयम से गैस का उत्पािन;

(viii) रेि की बौछार, धािु के गोले, नग्रट या र्ाप की संपीनडि वायु के ब्‍लास्‍ट से चानलि अन्य अपघर्यक द्वारा वस्िुओं को साफ करना, नचकना या खुरिुरा बनाना आनि;

(ix) कच्चे चमडे और चमडों का चूना लगाना और रंगना ििा उससे संबंनधि प्रनियाएँ;

(x) मुद्रर्ालय में सीसा और सीसा सामग्री की कुछ प्रनियाएँ करना;

(xi) रासायननक कायय;

(xii) नमट्टी के बियनों और चीनी नमट्टी की वस्िुओं का ननमायर्;

(xiii) जल के नवद्युि अपघटन द्वारा उत्पन्न ऑक्ट्सीजन और हाइड्रोजन का संपीडन;

(xiv) पत्िर या मुि नसनलका युि नकसी अन्य सामग्री का संचालन;

(xv) एस्बेस्टस का संचालन और प्रसंस्करर्, एस्बेस्टस की नकसी र्ी वस्िु का ननमायर् और

ननमायर् की कोई अन्य प्रनिया या अन्यिा नजसमें नकसी र्ी रूप में एस्बेस्टस का उपयोग नकया जािा है;

(xvi) संक्षारक पिािों का संचालन और संचालन;

(xvii) कारखानों में ओवन और ड्रायर का उपयोग;

(xviii) कैंसरकारी मध्यविी पिािों का ननमायर् या संचालन;

(xix) नवलायक ननष्ट्कर्यर् संयंत्रों में खली से वनस्पनि िेल ननकालने की प्रनिया;

(xx) मैंगनीज और उसके यौनगकों का ननमायर् या संचालन;

(xxi) बेंजीन से उत्पन्न होने वाले नवर्ाििा के खिरों से सुरक्षा;

(xxii) काबयन डाइसल्फाइड संयंत्र;

(xxiii) उच्च ध्वनन स्िर वाले संचालन;

(xxiv) खिरनाक कीटनाशकों का ननमायर् या संचालन;

(xxv) नवस्कोस द्वारा रेयान का ननमायर्;

20

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(xxvi) अत्यनधक ज्वलनशील द्रव और ज्वलनशील संपीनडि गैसें;

(xxvii) ढलाई कारखानों में संचालन;

(xxviii) जूट नमलों में प्रयुि होने वाली मशीनरी को छोडकर टेक्ट्‍स्‍टाइल मशीनरी;

(xxix) इंडक्ट्शन फनेस (प्रेरर् र्ट्टी) में नपघलने की प्रनिया;

(xxx) लकडी का काम करने वाली मशीनरी;

(xxxi) रबर नमलें;

(xxxii) अपकेन्द्री मशीनें;

(xxxiii) पावर प्रेस;

(xxxiv) कैंची, नस्लटर और नगलोनटन मशीनें;

(xxxv) िनमयक द्रव हीटर;

(xxxvi) िोनमक अम्ल का ननमायर् या सोनडयम,

पोटेनशयम या अमोननयम के बाइिोमेट का ननमायर् या पुनप्रायनप्त; और

(xxxvii) एलपीजी/एनसनटलीन/आगयन के उपयोग से वेनल्डंग/कनटंग कायय।

(2) इन ननयमों के साि संलग्न अनुसूनचयों में नननियष्ट प्रावधान ऐसे वगय या प्रकार के कारखानों पर लागू होंगे नजनमें प्रत्येक अनुसूची में नननियष्ट खिरनाक कायय नकए जािे हैं।

(3) (क) संलग्न अनुसूनचयों द्वारा अपेनक्षि “नचनकत्सा अनधकारी” द्वारा नकए जाने वाले श्रनमकों के नचनकत्सीय परीक्षर् के नलए, कारखाने का अनधर्ोगी प्रत्येक श्रनमक की

प्रनि परीक्षा एक सौ रुपये की िर से शुल्क का र्ुगिान करेगा;

(ख) खंड (क) में नननियष्ट शुल्क में जैनवक,

रेनडयोलॉनजकल या अन्य परीक्षर्ों के नलए कोई र्ी शुल्क शानमल नहीं होगा जो नचनकत्सीय

परीक्षर् के संबंध में नकए जाने पड सकिे हैं। ऐसे शुल्क अनधर्ोगी द्वारा िेय होंगे; और

(ग) नचनकत्सीय परीक्षर् के नलए र्ुगिान नकया जाने वाला शुल्क कोर्ागार में लेखा शीर्य में या सरकार द्वारा समय-समय पर नननियष्ट के अनुसार जमा नकया जाएगा।

(4) इस ननयम से संलग्न अनुसूनचयों में नकसी बाि के होिे हुए र्ी, ननरीक्षक-सह-सुनवधाप्रिािा अनधर्ोगी को नलनखि आिेश जारी कर सकिा है, नजसमें उसे ननिेश निया

जाएगा नक वह ऐसे उपाय करे, और ऐसे समय के र्ीिर, जैसा नक ऐसे आिेश में नननियष्ट नकया जा सकिा है, िानक श्रनमक के स्वास््य के नलए खिरनाक नस्िनियों को िूर नकया

जा सके या नकसी प्रनिया को ननलंनबि नकया जा सके, जहाँ ऐसी प्रनिया ननरीक्षक-सह-सुनवधाप्रिािा की राय में नवर्ाििा या नवर्ाििा का आसन्न खिरा पैिा करिी है।

(5) नकसी र्ी श्रनमक के संबंध में, संलग्न अनुसूची के िहि नकए जाने वाले नचनकत्सीय परीक्षर्ों और उससे संबंनधि नकसी र्ी रनजस्टर या ररकॉडय को ननरीक्षक-सह-सुनवधाप्रिािा

के पास आसानी से उपलब्ध रखा जाएगा और श्रनमक के कारखाने में रोजगार से बाहर होने के बाि एक वर्य की अवनध की समानप्त िक संरनक्षि रखा जाएगा।

66 धारा 83 की उपधारा (1) के अंतर्गत स्र्थि मूल्यांकन सभमभत; -

1. र्ठन

इन भनयमों में स्र्थि मूल्यांकन सभमभत (भजसे आर्े "सभमभत" कहा जाएर्ा) के कामकाज को भनम्नभिभखत प्रािधान भनयंभत्रत करेंर्े, अर्थागत्: -

(क) सरकार एक स्िल मूल्यांकन सनमनि का गठन करेगी और आवश्यकिानुसार श्रम आयुि, निल्ली की अध्यक्षिा में सनमनि का पुनगयठन करेगी;

(ख) सरकार औद्योनगक सुरक्षा एवं स्वास््य ननिेशालय, श्रम नवर्ाग, निल्ली के एक वररष्ठ अनधकारी को सनमनि का सनचव ननयुि करेगी;

(ग) सरकार ननम्ननलनखि को सनमनि के सिस्य के रूप में ननयुि कर सकिी है:

(i) सरकार के अनग्नशमन सेवा संगठन का एक प्रनिनननध;

(ii) उद्योग नवर्ाग, निल्ली का एक प्रनिनननध;

(iii) कारखाना सलाह सेवा एवं श्रम संस्िान, मुंबई के महाननिेशक का एक प्रनिनननध;

(iv) स्वास््य नवर्ाग का एक प्रनिनननध; और

(v) सरकार व्यावसानयक सुरक्षा या पयायवरर् संरक्षर् के क्षेत्र में अनुर्व रखने वाले िो व्यनियों को नानमि कर सकिी है।

2. कोई र्ी सिस्य, जब िक नक न्यायालय द्वारा ऐसा करने के नलए आवश्यक न हो, संनहिा के प्रयोजनों के अलावा नकसी अन्य संबंध में, नकसी र्ी समय नवननमायर् या

वानर्नज्यक व्यवसाय या नकसी कायय प्रनिया से संबंनधि कोई र्ी जानकारी प्रकट नहीं करेगा जो इस सनमनि के सिस्य के रूप में उसके काययकाल के िौरान उसके ज्ञान में आई

हो।

[PART IV

DELHI GAZETTE : EXTRAORDINARY

21

3. स्र्थि के मूल्यांकन के भिए आिेिन -

(क) धारा 2 के खंड (ज़ेडए) के अंिगयि आने वाले कारखानों के संबंध में स्िलों के मूल्यांकन के नलए आवेिन स्िल मूल्यांकन सनमनि के अध्यक्ष को प्रस्िुि नकए जाएंगे; और

(ख) स्िल मूल्यांकन के नलए आवेिन उसकी पंद्रह प्रनियों के साि प्रपत्र-26 में प्रस्िुि नकया जाएगा। सनमनि आवेिन पत्र में नकसी नवशेर् मि पर जानकारी िेने से छूट िे सकिी

है, यनि वह उसे नवचाराधीन आवेिन के नलए प्रासंनगक नहीं मानिी है।

4. सभमभत के कायग.-

(क) सनचव स्िल के मूल्यांकन हेिु प्राप्त आवेिनों को एक पृिक रनजस्टर में िजय करने की व्यवस्िा करेगा

और साि निनों की अवनध के र्ीिर इसकी पाविी िेगा;

(ख) सनचव बैठकें इस प्रकार ननधायररि करेगा नक प्राप्त और पंजीकृि सर्ी आवेिन, उनकी प्रानप्त की निनि से िीस निनों की अवनध के र्ीिर सनमनि को र्ेज निए जाएँ;

(ग) सनमनि आवेिनों के शीघ्र ननपटान की आवश्यकिा को ध्यान में रखिे हुए अपनी कायय-प्रर्ाली के नलए एक प्रनिया अपनाएगी;

(घ) सनमनि, नकसी उद्योग के स्िान और नवनर्न्न क्षेत्रों में प्रनियाओं और कायों को चलाने पर प्रनिबंधों और ननर्ेधों के संिर्य में, सनमनि में प्रनिनननधत्व निए गए नवनर्न्न नवर्ागों

के प्रावधानों के अनुसार, स्िल के मूल्यांकन हेिु आवेिनों की जाँच करेगी; और

(ङ) सनमनि िस्िावेज़ मँगवा सकिी है, नवशेर्ज्ञों से जाँच कर सकिी है, यनि आवश्यक हो िो स्िल का ननरीक्षर् कर सकिी है और स्िल की उपयुििा के संबंध में अपने

नवचार िैयार करने के नलए अन्य किम उठा सकिी है।

5. छूट.- पयायवरर् (संरक्षर्) अनधननयम, 1986 के अंिगयि र्ारि सरकार, पयायवरर् एवं वन मंत्रालय द्वारा जारी अनधसूचना संख्या एस.ओ. 1533(ई) निनांक 14.9.2006

के अंिगयि मंजूरी प्राप्त औद्योनगक पररयोजना को इस सनमनि से मंजूरी लेने की आवश्यकिा नहीं होगी।

67 धारा 84 की उपधारा (1) के अंतर्गत सूचना का अभनिायग प्रकटीकरण -

(1) नकसी खिरनाक प्रनिया को संचानलि करने वाले कारखाने का अनधष्ठािा, नवननमायर्, पररवहन, र्ंडारर् और अन्य प्रनियाओं में खिरनाक सामनग्रयों या पिािों के संचालन

के संबंध में सर्ी श्रनमकों को ननम्ननलनखि जानकारी प्रिान करेगा, अिायि्: -

(क) धारा 84 की आवश्यकिाएँ;

(ख) कारखाने में संचानलि खिरनाक प्रनियाओं की सूची;

(ग) सर्ी सामग्री सुरक्षा डेटा शीट का स्िान और उपलब्धिा;

(घ) पिािों के संपकय में आने या उनके संचालन से उत्पन्न होने वाले शारीररक और स्वास््य संबंधी खिरे;

(ङ) शारीररक और स्वास््य संबंधी खिरों की सुरक्षा और ननयंत्रर् सुनननिि करने के नलए अनधष्ठािा द्वारा नकए गए उपाय;

(च) खिरनाक पिािों का सुरनक्षि संचालन, र्ंडारर् और पररवहन सुनननिि करने के नलए श्रनमकों द्वारा नकए जाने वाले उपाय;

(छ) खिरनाक प्रनिया या खिरनाक कायों में काययरि श्रनमकों द्वारा उपयोग नकए जाने वाले व्यनिगि सुरक्षा उपकरर्;

(ज) खिरनाक पिािों के कंटेनरों में प्रयुि नवनर्न्न लेबल और नचिों का अिय;

(झ) खिरनाक पिािों के संपकय में आने पर प्रकट होने वाले संर्ानवि संकेि और लक्षर् ििा नकसे ररपोटय करना है;

(ञ) नकसी खिरनाक पिािय के छलकने या ररसाव की नस्िनि में श्रनमकों द्वारा नकए जाने वाले उपाय;

(ट) कारखाने की आपािकालीन योजना, नवशेर् रूप से ननकासी प्रनियाओं के संबंध में श्रनमकों की र्ूनमका; और

(ठ) श्रनमकों की सुरक्षा और स्वास््य सुनननिि करने के नलए अनधर्ोगी द्वारा आवश्यक समझी जाने वाली कोई अन्य जानकारी।

(2) उप-ननयम (1) द्वारा अपेनक्षि जानकारी का अनुपालन नकया जाएगा और काययस्िलों पर पुनस्िकाओं या पचों की आपूनिय और चेिावनी सूचनाओं के प्रिशयन के माध्यम से

श्रनमकों को व्यनिगि रूप से अवगि कराया जाएगा।

(3) कारखाने में प्रिनशयि पुनस्िकाएँ, पनचयाँ और चेिावनी सूचनाएँ ऐसी र्ार्ा में होंगी नजसे अनधकांश श्रनमक समझ सकें और उन्हें समझाई र्ी जाएँगी।

(4) मुख्य ननरीक्षक-सह-सुनवधाकिाय अनधर्ोगी को ननिेश िे सकिा है नक वह श्रनमकों को आवश्यकिानुसार अनिररि जानकारी प्रिान करे।

68 धारा 84 की उपधारा (1), (2) और (5) के अंतर्गत अभधिोर्ी द्वारा सूचना का अभनिायग प्रकटीकरण -

(1) "खिरनाक प्रनिया" चलाने वाले प्रत्येक कारखाने का अनधर्ोगी, ऐसी प्रनिया शुरू होने से िीस निन पहले नलनखि रूप में मुख्य ननरीक्षक-सह-सुनवधा-प्रिािा को खिरों

से संबंनधि सूचना प्रस्िुि करेगा और काययस्िल पर नकसी प्रमुख स्िान पर ऐसी सूचना प्रिनशयि करेगा।

(2) कारखाने में प्रयुि, उत्पानिि, पररचानलि या र्ण्डाररि खिरनाक पिािों के संबंध में सामग्री सुरक्षा डेटा शीट के संकलन की एक प्रनि प्रपत्र-27 में िैयार/प्राप्त की जाएगी

और मुख्य ननरीक्षक-सह-सुनवधाकिाय को प्रस्िुि की जाएगी।

(3) अनधर्ोगी, इस संनहिा और इन ननयमों के प्रयोजनािय समय-समय पर मुख्य ननरीक्षक-सह-सुनवधाकिाय द्वारा मांगी गई कोई अन्य सूचना र्ी प्रस्िुि करेगा।

(4) अनधर्ोगी प्रत्येक कैलेंडर वर्य में एक बार इन ननयमों के अंिगयि श्रनमकों, मुख्य ननरीक्षक-सह-सुनवधाप्रिािा को िी गई जानकारी की समीक्षा करेगा और यनि आवश्यक हो

22

DELHI GAZETTE : EXTRAORDINARY

PART IV]

िो उसे संशोनधि करेगा।

(5) अनधर्ोगी कारखाने के खिरनाक पिािों और खिरनाक प्रनियाओं के बारे में बरिी जाने वाली सावधाननयों के बारे में जानकारी स्िानीय प्रानधकारी को नलनखि रूप में

और आसपास रहने वाले आम लोगों को जन जागरूकिा काययिमों और पत्रकों के माध्यम से प्रसाररि करेगा।

(6) प्रनिया या संचालन या श्रनमक के िरीकों में नकसी र्ी पररवियन की नस्िनि में, जब प्रनिया में कोई नया पिािय डाला जािा है या कोई गंर्ीर िुघयटना होिी है, िो िी गई

जानकारी की समीक्षा की जाएगी और आवश्यकिानुसार संशोनधि नकया जाएगा।

69 स्िास््य एिं सुरिा नीभत -

खिरनाक प्रनियाओं से जुडे प्रत्येक कारखाने के अनधर्ोगी को एक स्वास््य एवं सुरक्षा नीनि िैयार करनी होगी।

(1) स्वास््य एवं सुरक्षा नीनि में ननम्ननलनखि शानमल होंगे या उनसे संबंनधि होंगे: -

क. स्वास््य, सुरक्षा और पयायवरर् के प्रनि शीर्य प्रबंधन की घोनर्ि मंशा और प्रनिबििा और सर्ी प्रासंनगक वैधाननक आवश्यकिाओं का अनुपालन;

ख. घोनर्ि नीनि को लागू करने के नलए संगठनात्मक व्यवस्िा नजसमें नवनर्न्न स्िरों पर स्पष्ट रूप से नजम्मेिारी सौंपी गई हो;

और

ग. नीनि को प्रर्ावी बनाने की व्यवस्िा।

(2) नवशेर् रूप से, नीनि में ननम्ननलनखि का उल्लेख होगा, अिायि्: -

क. श्रनमकों को शानमल करने की व्यवस्िा;

ख. श्रनमकों के कररयर में उन्ननि पर नवचार करिे हुए नवनर्न्न स्िरों पर उनके स्वास््य एवं सुरक्षा प्रिशयन को ध्यान में रखने की मंशा;

ग. पररसर में प्रवेश करने वाले ठेकेिारों, उप-ठेकेिारों, रांसपोटयरों और अन्य एजेंनसयों की नजम्मेिारी िय करना;

घ. अपनी वानर्यक ररपोटय में कारखाने के स्वास््य एवं सुरक्षा प्रिशयन का सारांश प्रिान करना;

ङ. प्रासंनगक िकनीकें और नवनधयाँ, जैसे नक सुरक्षा ऑनडट और जोनखम मूल्यांकन, स्वास््य, सुरक्षा और पयायवरर् की नस्िनि का आवनधक मूल्यांकन और सर्ी उपचारात्मक

उपाय करना;

च. सर्ी ननर्यों में स्वास््य और सुरक्षा को एकीकृि करने के अपने इरािे बिाना, नजनमें संयंत्र, उपकरर्, मशीनरी और सामग्री की खरीि के साि-साि कनमयों के चयन और

ननयुनि से संबंनधि ननर्य र्ी शानमल हैं; और

छ. नवनर्न्न स्िरों पर अपने कमयचाररयों और जनिा को, जहाँ र्ी आवश्यक हो, सूनचि करने, नशनक्षि करने, प्रनशक्षर् िेने और पुनिः प्रनशक्षर् िेने की व्यवस्िा करना।

(3) अनधर्ोगी द्वारा नवनधवि हस्िाक्षररि घोनर्ि स्वास््य और सुरक्षा नीनि की एक प्रनि कारखाने पर अनधकार क्षेत्र रखने वाले ननरीक्षक-सह-सुनवधाप्रिािा या मुख्य ननरीक्षक-

सह-सुनवधाप्रिािा को उपलब्ध कराई जाएगी।

(4) नीनि को व्यापक रूप से ननम्ननलनखि माध्यमों से प्रचाररि नकया जाएगा: -

क. ठेका श्रनमकों, प्रनशक्षुओं, पररवहन श्रनमकों और आपूनियकिायओं आनि सनहि सर्ी श्रनमकों को प्रनियां उपलब्ध कराना,

ख. नीनि की प्रनियों को प्रमुख स्िानों पर प्रिनशयि करना, और

ग. संचार का कोई अन्य माध्यम।

(5) अनधर्ोगी स्वास््य एवं सुरक्षा नीनि को यिासमय संशोनधि करेगा, परन्‍िु, ननम्ननलनखि पररनस्िनियों में इसे अननवायय रूप से संशोनधि नकया जाएगा। -

क. जब र्ी काययस्िल पर व्यनियों के स्वास््य और सुरक्षा पर प्रर्ाव डालने वाला कोई नवस्िार या संशोधन नकया जािा है; या

ख. जब र्ी नवननमायर् प्रनिया में ऐसे पिािों के संपकय में आने वाले व्यनियों के स्वास््य और सुरक्षा पर प्रर्ाव डालने वाले नए पिािय या वस्िुएँ शानमल की जािी हैं।

अनधर्ोगी संशोनधि स्वास््य एवं सुरक्षा नीनि की सूचना िीस निनों के र्ीिर कारखाने पर अनधकार क्षेत्र रखने वाले ननरीक्षक-सह-सुनवधाकिाय या मुख्य ननरीक्षक-सह-सुनवधाकिाय

और स्िानीय प्रानधकारी को िेगा।

70 धारा 84 की उपधारा (4) के अंतर्गत आम जनता को सूचना का प्रकटीकरण-

(1) प्रमुख िुघयटना जोनखम संस्िापन का प्रत्येक अनधर्ोगी, मुख्य ननरीक्षक-सह-सुनवधाप्रिािा के अनुमोिन से, एक स्िलीय आपािकालीन योजना िैयार करेगा और िुघयटना से

प्रर्ानवि होने वाले क्षेत्र में उपनस्िि आम जनिा को सूनचि करने के नलए उनचि किम उठाएगा। ऐसी सूचना में ननम्ननलनखि शानमल होंगे:-

(i) कारखाने का नाम और पिा जहाँ वह नस्िि है;

(ii) सूचना िेने वाले व्यनि की पहचान, नाम और पि;

(iii) इस बाि की पुनष्ट नक कारखाने को औद्योनगक सुरक्षा एवं स्वास््य ननिेशालय से अनुमोिन प्राप्त है;

(iv) पररसर में की जा रही नकसी खिरनाक प्रनिया (प्रनियाओं) का सरल शब्िों में स्पष्टीकरण;

(v) प्रयुि खिरनाक पिािों के सामान्य नाम, जो नकसी िुघयटना का कारर् बन सकिे हैं और उनकी प्रमुख हाननकारक नवशेर्िाओं का संकेि;

(vi) प्रासंनगक सुरक्षा कानूनों के िहि अपने कानूनी िानयत्वों के अनुपालन में ऐसी िुघयटना के जोनखम को कम करने के नलए नकए जाने वाले उपायों का संनक्षप्त नववरर्; (vii)

कारखाने में अपनाए गए अनुमोनिि आपिा ननयंत्रर् उपायों की मुख्य नवशेर्िाएँ;

(viii) आम जनिा के नलए कारखाने की आपािकालीन चेिावनी प्रर्ाली का नववरर्;

(ix) चेिावनी सुनने पर जनिा द्वारा की जाने वाली कारयवाई पर सामान्य सलाह;

[PART IV

DELHI GAZETTE : EXTRAORDINARY

23

(x) कारखाने में ऐसी संर्ानवि िुघयटनाओं से ननपटने और उनके प्रर्ावों को न्यूनिम करने के नलए आपािकालीन सेवाओं के साि संपकय सनहि व्यवस्िाओं का संनक्षप्त नववरर्;

और इसका नववरर् नक

(xi) आगे की जानकारी कहाँ से प्राप्त की जा सकिी है ।

(2) अनधर्ोगी कोई र्ी अनिररि जानकारी र्ी प्रिान करेगा,-

(i) नजला मनजस्रेट द्वारा समय-समय पर ननिेनशि आम जनिा को;

(ii) अनुरोध पर आम जनिा के ननवायनचि प्रनिनननधयों को।

(3) अनधर्ोगी उस क्षेत्र के नजला मनजस्रेट के साि एक समझौिा करने का प्रयास करेगा, नजसके अनधकार क्षेत्र में कारखाना नस्िि है, िानक नजला मनजस्रेट कारखाने के बाहर

आम जनिा को सूनचि करने के नलए उनचि किम उठा सके, नजनके उप-ननयम (1) में अपेनक्षि अनुसार िुघयटना से प्रर्ानवि होने की आशंका है।

(4) उप-ननयम (1) में िी गई जानकारी अंग्रेजी में और आसपास के क्षेत्र की अनधकांश जनिा द्वारा समझी जाने वाली र्ार्ा में होगी।

71 धारा 84 की उपधारा (3) और (7) के अंतर्गत औद्योभर्क अपभशष्टों की जानकारी-

खिरनाक प्रनियाओं से संबंनधि प्रत्येक कारखाने का अनधष्ठािा, मुख्य ननरीक्षक-सह-सुनवधाकिाय के अनुमोिन से, ननम्ननलनखि नववरर् प्रस्िुि करेगा:

(1) ननयम 67 और 68 के अंिगयि प्रस्िुि जानकारी में प्रनिनिन उत्पन्न ठोस और िरल अपनशष्टों की मात्रा, उनकी नवशेर्िाएँ और उपचार की नवनध जैसे

ठोस अपनशष्टों का िहन, रासायननक और जैनवक उपचार या िरल अपनशष्ट, और उनके अंनिम ननपटान की व्यवस्िाएँ शानमल होंगी।

(2) इसमें स्टैक या अन्य नछद्रों से ननकलने वाले गैसीय अपनशष्ट की गुर्वत्ता और मात्रा, और पयायवरर् प्रिूर्र् को ननयंनत्रि करने के नलए स्िबर,

साइक्ट्लोन सेपरेटर, और इलेक्ट्रोस्टैनटक प्रीनसनपटेटर या इसी िरह की व्यवस्िाओं की जानकारी र्ी शानमल होगी।

72 धारा 85 के अंतर्गत खतरनाक प्रभियाओं में भनयोभजत िभमकों की भचभकत्सा परीिा -

(1) खिरनाक प्रनियाओं में ननयोनजि श्रनमकों की नचनकत्सा परीक्षा योग्य नचनकत्सा व्यवसायी द्वारा ननम्ननलनखि िरीके से की जाएगी, अिायि्:-

(क) ननयोजन से पहले एक बार, नकसी नवशेर् कायय के नलए व्यनि की शारीररक योग्यिा सुनननिि करने के नलए;

(ख) व्यावसानयक स्वास््य संबंधी खिरों, नजनसे नश्र‍ प्रर्ानवि होिे हैं; के संबंध में सर्ी श्रनमकों की स्वास््य नस्िनि का पिा लगाने के नलए छह महीने की अवनध में एक बार,

और ऐसे मामलों में जहाँ योग्य नचनकत्सा व्यवसायी की राय में नकसी र्ी श्रनमक के संबंध में कम अंिराल पर ऐसा करना आवश्यक हो; और

(ग) पूवोि रूप से की गई ननयोजन-पूवय और आवनधक नचनकत्सा परीक्षा का नववरर् स्वास््य रनजस्टर में प्रपत्र-05 में िजय नकया जाएगा।

(2) नकसी र्ी व्यनि को योग्य नचनकत्सा व्यवसायी द्वारा प्रपत्र 24 में निए गए योग्यिा प्रमार् पत्र के नबना पहली बार ननयोनजि नहीं नकया जाएगा। यनि योग्य नचनकत्सा व्यवसायी

नकसी व्यनि को उप-ननयम-(1) के अंिगयि आने वाली नकसी प्रनिया में ननयोनजि नकए जाने के नलए अयोग्य घोनर्ि करिा है, िो ऐसे व्यनि को ननरीक्षक-सह-सुनवधाप्रिािा

के समक्ष अपील करने का अनधकार होगा, जो मामले को नचनकत्सा अनधकारी के पास र्ेजेगा, नजसकी राय इस संबंध में अंनिम होगी। यनि ननरीक्षक-सह-सुनवधाप्रिािा स्वयं

र्ी एक नचनकत्सा अनधकारी है, िो वह आवेिन का स्वयं ननपटारा कर सकिा है।

(3) योग्य नचनकत्सा व्यवसायी द्वारा प्रनिया में ननयोनजि नकसी व्यनि की नकसी असामान्यिा या अनुपयुििा का खुलासा करने वाले नकसी र्ी ननष्ट्कर्य की सूचना िुरंि नचनकत्सा

अनधकारी को िी जाएगी, जो बिले में संबंनधि काययकिाय की जांच करेगा और िीस निनों के र्ीिर अनधर्ोगी को अपने ननष्ट्कर्ों से अवगि कराएगा। यनि नचनकत्सा अनधकारी

की राय है नक इस प्रकार जांचे गए काययकिाय को स्वास््य सुरक्षा के नलए प्रनिया से हटा निया जाना आवश्यक है, िो वह ििनुसार अनधर्ोगी को ननिेश िेगा, जो उि काययकिाय

को उसी प्रनिया में ननयोनजि नहीं करेगा। परन्‍िु, इस प्रकार हटाए गए कमयचारी को वैकनल्पक स्िान प्रिान नकया जाएगा, जब िक नक वह नचनकत्सा अनधकारी की राय में पूरी

िरह से अक्षम न हो, ऐसी नस्िनि में प्रर्ानवि कमयचारी का उनचि पुनवायस नकया जाएगा:

परन्‍िु यह उपबंनधि है नक नचनकत्सा अनधकारी स्वयं नकसी र्ी कमयचारी की जाँच कर सकिा है, यनि वह 'खिरनाक प्रनिया' में उसके ननयोजन की उपयुििा सुनननिि करने के

नलए या नकसी कमयचारी की स्वास््य नस्िनि का पिा लगाने के नलए ऐसा करना आवश्यक समझे।

(4) उप-ननयम (2) के अंिगयि नकसी र्ी प्रनिया में ननयोजन से हटाए गए कमयचाररयों को नचनकत्सा अनधकारी से नफटनेस प्रमार्पत्र प्राप्त करने और स्वास््य रनजस्टर में उस

आशय की प्रनवनष्टयाँ करने के बाि ही उसी प्रनिया में पुनिः ननयोनजि नकया जा सकिा है।

(5) यनि कोई ननरीक्षक-सह-सुनवधाप्रिािा, ऐसा करना आवश्यक समझे, िो नकसी कमयचारी को उप-ननयम (1) के अंिगयि अपेनक्षि नचनकत्सा परीक्षर् के नलए नचनकत्सा

अनधकारी के पास र्ेज सकिा है या यनि वह स्वयं एक नचनकत्सा अनधकारी है, िो ऐसी नचनकत्सा परीक्षा कर सकिा है।

(6) ऐसे मामले में नचनकत्सा अनधकारी की राय अंनिम होगी। इस नचनकत्सा परीक्षर् के नलए आवश्यक शुल्क अनधर्ोगी द्वारा र्ुगिान नकया जाएगा।

24

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(7) इन ननयमों के िहि और केंद्र या राज्‍य सरकार द्वारा या उनकी ओर से नकए गए नकसी र्ी नचनकत्सा सवेक्षर् के नलए नचनकत्सा परीक्षर् से गुजरने के नलए संबि कमयचारी

ऐसी नचनकत्सा परीक्षा से इनकार नहीं करेगा।

73 धारा 85 (ख) के अंतर्गत पयगिेिकों की योग्यताएँ आभि- (1) सर्ी व्यनि नजन्हें खिरनाक पिािों के संचालन का पययवेक्षर् करना है, उनके पास ननम्ननलनखि योग्यिाएँ

और अनुर्व होना चानहए:

(क) (i) रसायन नवज्ञान में नडग्री या रासायननक अनर्यांनत्रकी या प्रौद्योनगकी में नडप्लोमा और 5 वर्य का अनुर्व; या

(ii) रसायन नवज्ञान में स्नािकोत्तर नडग्री या रासायननक अनर्यांनत्रकी या प्रौद्योनगकी में नडग्री और 2 वर्य का अनुर्व।

ऊपर उनल्लनखि अनुर्व रासायननक उद्योग में प्रनिया, संचालन और रखरखाव का होगा।

(ख) मुख्य ननरीक्षक-सह-सुनवधाप्रिािा पययवेक्षक से स्वास््य और सुरक्षा में प्रनशक्षर् लेने की अपेक्षा कर सकिा है।

(2) उपरोि प्रनशक्षर् का पाठ्यिम और अवनध ििा प्रनशक्षर् आयोनजि करने वाले संगठनों को कारखाना सलाह सेवा और श्रम संस्िानों के महाननिेशक द्वारा जारी निशाननिेशों

के अनुसार सरकार द्वारा अनुमोनिि नकया जाएगा।

74 धारा 85 (ख) के अंतर्गत व्यािसाभयक स्िास््य केंद्र -

(1) खिरनाक प्रनिया वाले नकसी र्ी कारखाने के संबंध में, नीचे निए गए पैमाने के अनुसार सेवाओं और सुनवधाओं के साि एक व्यावसानयक स्वास््य केंद्र प्रिान नकया जाएगा

और उसे अच्छी नस्िनि में बनाए रखा जाएगा: -

(क) पचास िभमकों तक को रोजर्ार िेने िािे कारखानों के भिए -

(i) अनधर्ोगी द्वारा अनधसूनचि ररटेनरनशप आधार पर नकसी योग्य नचनकत्सक की सेवाएँ। वह ननयम 72 में ननधायररि अनुसार पूवय-ननयोजन और आवनधक नचनकत्सा परीक्षर्

करेगा और नकसी र्ी आपाि नस्िनि के िौरान नचनकत्सा सहायिा प्रिान करेगा;

(ii) प्रािनमक नचनकत्सा प्रनिया में प्रनशनक्षि कम से कम पाँच व्यनि, नजनमें से कम से कम एक कायय अवनध के िौरान हमेशा उपलब्ध रहेगा; और

(iii) एक पूरी िरह से सुसनज्जि प्रािनमक नचनकत्सा बॉक्ट्स।

(ख) 51 से 200 िभमकों को रोजर्ार िेने िािे कारखानों के भिए: -

(i) एक व्यावसानयक स्वास््य केंद्र नजसमें न्यूनिम पंद्रह वगय मीटर का फशय क्षेत्रफल वाला एक कमरा हो, नजसके फशय और िीवारें नचकनी और अर्ेद्य सिह की हों और नजसमें

पयायप्त रोशनी और वेंनटलेशन के साि-साि इस ननयम से संबि अनुसूची के अनुसार उपकरर् र्ी हों;

(ii) कोई अंशकानलक योग्य नचनकत्सा व्यवसायी केंद्र का समग्र प्रर्ारी होगा, जो

सप्ताह में कम से कम िो बार कारखाने का िौरा करेगा और नजसकी सेवाएँ नचनकत्सा आपाि नस्िनि के िौरान ित्काल उपलब्ध होंगी;

(iii) पूरी कायय अवनध के िौरान एक योग्य और प्रनशनक्षि ड्रेसर-सह-कंपाउंडर ड्यूटी पर रहेगा; और

(iv) सर्ी नवर्ागों में एक पूरी िरह से सुसनज्जि प्रािनमक नचनकत्सा बॉक्ट्स उपलब्‍ध रहेगा।

(र्) 200 से अभधक िभमकों को रोजर्ार िेने िािे कारखानों के भिए: -

(i) पाँच सौ िक श्रनमकों को रोजगार िेने वाले कारखानों के नलए एक पूर्यकानलक योग्य नचनकत्सा व्यवसायी और प्रत्येक अनिररि एक हजार श्रनमकों या उसके र्ाग के नलए,

एक और योग्य नचनकत्सा व्यवसायी;

(ii) कोई व्यावसानयक स्वास््य केंद्र नजसमें कम से कम िो कमरे हों, नजनमें से प्रत्येक का न्यूनिम फशय

क्षेत्रफल पंद्रह वगय मीटर हो, फशय और िीवारें नचकनी और अर्ेद्य सिह की हों और पयायप्त रोशनी और वेंनटलेशन के साि-साि इस ननयम से संलग्न अनुसूची के अनुसार उपकरर्

उपलब्ध हों।

(iii) पूरी कायय-अवनध के िौरान एक नसय, एक ड्रेसर-सह-कंपाउंडर और एक स्वीपर-सह-वाडय बॉय मौजूि रहेंगे; और

(iv) व्यावसानयक स्वास््य केंद्र नचनकत्सा आपाि नस्िनियों के प्रबंधन के नलए उपयुि रूप से सुसनज्जि होगा।

(2) उप-ननयम (1) के अंिगयि ननयुि नकए जाने वाले योग्य नचनकत्सा व्यवसायी के पास राष्ट्रीय नचनकत्सा आयोग अनधननयम, 2019 (केन्द्रीय अनधननयम संख्या 30,

2019) में पररर्ानर्ि कोई मान्यिा प्राप्त नचनकत्सा योग्यिा होनी चानहए और उसे उि अनधननयम की धारा 2 के खंड (ड) में पररर्ानर्ि अनुसार राष्ट्रीय रनजस्टर में नामांनकि

होना चानहए या धारा 2 के खंड (v) में पररर्ानर्ि अनुसार राज्य रनजस्टर में नामांनकि होना चानहए और उसके पास सरकार द्वारा मान्यिा प्राप्त न्यूनिम िीन महीने की अवनध

का औद्योनगक स्वास््य प्रनशक्षर् प्रमार्पत्र होना चानहए:

परन्‍िु यह उपबंनधि है नक-

(i) औद्योनगक स्वास््य में नडप्लोमा या समकक्ष योग्यिा रखने वाले व्यनि को पूवोि प्रनशक्षर् प्रमार्पत्र रखने की आवश्यकिा नहीं होगी;

(ii) मुख्य ननरीक्षक-सह-सुनवधाप्रिािा, ऐसी शिों के अधीन, नजन्हें वह नननियष्ट करे, इस उप-ननयम की आवश्यकिा से छूट प्रिान कर सकिा है, यनि उसकी राय में ननयुनि के

नलए आवश्यक योग्यिा रखने वाला कोई उपयुि व्यनि उपलब्ध नहीं है; और

(iii) ऐसे व्यनि के मामले में जो इन ननयमों के लागू होने की निनि से कम से कम िीन वर्य की अवनध के नलए योग्य नचनकत्सा व्यवसायी के रूप में काययरि रहा है, मुख्य

[PART IV

DELHI GAZETTE : EXTRAORDINARY

25

ननरीक्षक-सह-सुनवधाकिाय, इस शिय के अधीन नक उि व्यनि िीन वर्य की अवनध के र्ीिर पूवोि प्रनशक्षर् प्रमार्पत्र प्राप्त कर लेगा, योग्यिा में छूट िे सकिा है।

(3) उपरोि प्रमार्पत्र से संबंनधि पाठ्यिम का नसलेबस और उि पाठ्यिम संचानलि करने वाला संगठन, महाननिेशक, कारखाना परामशय सेवा एवं श्रम संस्िान द्वारा जारी

निशाननिेशों के अनुसार सरकार द्वारा अनुमोनिि होगा।

(4) महाननिेशक, कारखाना परामशय सेवा एवं श्रम संस्िान द्वारा इस पाठ्यिम के नलए अनुमोनिि संगठन र्ी उपरोि प्रमार्पत्र जारी करने के नलए पात्र होगा।

(5) योग्य नचनकत्सा व्यवसायी की ननयुनि के एक माह के र्ीिर, कारखाना अनधष्ठािा मुख्य ननरीक्षक-सह-सुनवधाप्रिािा को ननम्ननलनखि नववरर् प्रस्िुि करेगा, अिायि्: -

(क) योग्य नचनकत्सा व्यवसायी का नाम और पिा;

(ख) योग्यिाएँ;

(ग) अनुर्व, यनि कोई हो; और

(घ) वह उप-ननयम नजसके अंिगयि ननयुनि की गई है।

अनुसूची

कारखानों में व्यािसाभयक स्िास््य केंद्र के भिए उपकरण।

1. गमय और ठंडे पानी की हमेशा उपलब्धिा वाला एक चमकिार नसंक।

2. कम से कम 180 सेमी x 105 सेमी आकार की एक नचकनी सिह वाली मेज।

3. उपकरर्ों को कीटार्ुरनहि करने का साधन।

4. एक सोफा।

5. िो बानल्टयाँ या बियन जो कसकर नफट हों।

6. एक केिली और नस्पररट स्टोव या पानी उबालने का कोई अन्य उपयुि साधन।

7. नस्पररट अमोननया कैरोमैनटक्ट्स की एक बोिल (120 नमली)

8. िो मध्यम आकार के स्पंज।

9. िो नकडनी रे।

10. टॉयलेट के चार केक, अनधमानििः एंटीसेनप्टक।

11. िो कांच के नगलास और िो वाइन ग्लास।

12. िो नक्ट्लननकल िमायमीटर।

13. िो चाय के चम्मच।

14. मापने के नलए िो मानक नगलास (120 नमली)।

15. आँखें धोने के नलए एक वॉश बोिल (1000 सीसी)।

16. एक बोिल (एक लीटर) काबोनलक लोशन 20 में 1.

17. िीन कुनसयाँ.

18. एक स्िीन.

19. एक इलेनक्ट्रक हैंड टॉचय.

20. टेटनस टॉक्ट्सॉइड की पयायप्त आपूनिय.

21. कोरामाइन नलनक्ट्वड (60 नमली.).

22. टैलेट्स-एंटीनहस्टानमननक, एंटीस्पास्मोनडक (प्रत्येक 25)

23. सुइयों वाली नसररंज - 2 सीसी, और 10 सीसी।

24. िो बडे और छोटे सुई होल्डर।

25. सेनप्सस के नलए एक ड्रेनसंग।

26. एक स्केलपेल।

27. एक स्टेिस्कोप।

26

DELHI GAZETTE : EXTRAORDINARY

PART IV]

28. रबर बैंडेज-प्रेशर बैंडेज।

29. आवश्यक उपकरर्ों के साि ऑक्ट्सीजन नसलेंडर।

30. एक रिचाप उपकरर्,

31. एक पटेला हैमर।

32. फेफडों के कायय माप के नलए एक पीक-्लो मीटर।

33. एक पेट धोने का सेट।

34. ननमायर् प्रनिया से संबंनधि नवनशष्ट आवश्यकिा के अनुसार फैक्ट्री "नचनकत्सा अनधकारी" द्वारा अनुशंनसि कोई अन्य उपकरर्।

35. इसके अभतररक्त-

(1) 51 से 200 िभमकों को रोजर्ार िेने िािे कारखानों के भिए

1. चार सािे लकडी के नस्प्लंट 900 नममी x 00 नममी x 6 नममी

2. चार सािे लकडी के नस्प्लंट 50 नममी x 75 नममी x 6 नममी।

3. िो सािे लकडी के नस्प्लंट 250 नममी x 50 नममी x 12 नममी।

4. एक जोडी आटयरी फोसेप्‍स।

5. इंजेक्ट्शन-मॉनफयया, पेनिडीन, एरोनपन, एड्रेनालाईन, कोरामाइन, नोवाकैन (प्रत्येक 2)।

6. एक सनजयकल कैंची।

(2) 200 से अभधक िभमकों िािे कारखानों के भिए।

1. आठ सािे लकडी के नस्प्लंट 900 नममी x 100 नममी x 6 नममी।

2. आठ सािे लकडी के नस्प्लंट 350 नममी x 75 नममी x 6 नममी।

3. चार सािे लकडी के नस्प्लंट 250 नममी x 50 नममी x 12 नममी।

4. िो जोडी आटयरी फोसेप्‍स।

5. इंजेक्ट्शन - मॉनफयया, पेिाडाइन, एरोनपन, एड्रेनालाईन, कोरानमन, नोवाकैन

(प्रत्येक 4)।

6. िो सनजयकल कैंची।

75 धारा 85 (र्) के अंतर्गत एम्बुिेंस िैन.-

1. खिरनाक प्रनिया करने वाले नकसी र्ी कारखाने में, उप-ननयम (2) के अनुसार उपयुि रूप से नननमयि एम्बुलेंस वैन उपलब्ध कराई जाएगी और अच्छी नस्िनि में रखी

जाएगी, नजसमें िुघयटना या बीमारी के गंर्ीर मामलों के पररवहन के नलए प्रािनमक उपचार में प्रनशनक्षि पूर्यकानलक चालक-सह-मैकेननक और सहायक होंगे। एम्बुलेंस वैन का

उपयोग यहाँ ननधायररि उद्देश्य के अलावा नकसी अन्य उद्देश्य के नलए नहीं नकया जाएगा और इसे सामान्यििः व्यावसानयक स्वास््य केंद्र पर या उसके ननकट िैनाि नकया जाएगा।

बशिे नक िो सौ से कम श्रनमकों को रोजगार िेने वाला कारखाना नकसी र्ी आपाि नस्िनि से ननपटने के नलए ननकटविी अस्पिाल या अन्य स्िानों से अल्प सूचना पर ऐसी

सुनवधा प्राप्त करने की व्यवस्िा कर सकिा है।

2. एम्बुिेंस में भनम्नभिभखत उपकरण होने चाभहए:-

(क) सामान्य -

-- फोनल्डंग और एडजनस्टंग उपकरर्ों के साि एक पनहएिार स्रेचर; स्रेचर का नसरा ऊपर की ओर झुकाया जा सके;

-- उपकरर्ों के साि नस्िर सक्ट्शन यूननट;

-- उपकरर्ों सनहि नस्िर ऑक्ट्सीजन आपूनिय;

-- कवर सनहि िनकया, चािरें, कंबल, िौनलए;

-- उल्टी की िैली, बेड पैन, मूत्रालय, शीशा

(ख) सुरक्षा उपकरर् -

-- िीस नमनट िक चलने वाले ्लेयसय;

-- ्लड लाइट;

-- ्लैश लाइट, शुष्ट्क पाउडर प्रकार के अनग्नशामक यंत्र;

-- इंसुलेटेड िस्िाने।

(ग) आपािकालीन िेखर्ाल उपकरर् -

(i) ररसनसटेश्न (पुनजीवन) -

-- पोटेबल सक्ट्शन यूननट, पोटेबल ऑक्ट्सीजन यूननट;

[PART IV

DELHI GAZETTE : EXTRAORDINARY

27

-- बैग-वाल्व-मास्क, हाि से संचानलि कृनत्रम वेंनटलेशन यूननट;

-- वायुमागय; - मुँह की गैसें; - रेकस्टोमी एडॉप्टर;

-- छोटा स्पाइन बोडय; - प्रशासन इकाई सनहि आई.वी. द्रव;

-- बी.पी. मैनोमीटर; - गुग्ग; - स्टेिोस्कोप

(ii) नस्िरीकरर् -

-- लंबे और छोटे गद्देिार बोडय; - िार की सीढी के नस्प्लंट;

-- नत्रकोर्ीय पट्टी; -लंबे और छोटे स्पाइन बोडय।

(iii) ड्रेनसंग -

-- गॉज़ पैड - 4" x 4"; - यूननवसयल ड्रेनसंग 10" x 36";

-- एल्युमीननयम फॉइल का रोल; - 3" नचपकने वाला टेप; - से्टी नपन;

-- बैंडेज शीट; - बनय शीट।

(iv) नवर्ाििा -

-- इपेके नसरप; - खुराक में पहले से पैक नकया हुआ एनक्ट्टवेटेड चारकोल; - साँप काटने की नकट;

-- पीने का पानी।

(v) आपािकालीन िवाइयाँ -

-- आवश्यकिानुसार (केवल नचनकत्सा अनधकारी की सलाह पर)।

76 धारा 85 के अंतर्गत पररशोधन सुभिधाएँ- प्रत्येक कारखाने में, जहाँ 'खतरनाक प्रभिया' की जाती है, आपात भस्र्थभत से भनपटने के भिए भनम्नभिभखत प्रािधान

भकए जाएँर्े,

अिायि्:-

(क) पूरी िरह सुसनज्जि प्रािनमक नचनकत्सा बॉक्ट्स;

(ख) श्रनमकों के कपडे धोने, नर्गोने के नलए पानी के आसानी से सुलर् साधन और साि ही उन लोगों के नलए जो खिरनाक और संक्षारक पिािों से िूनर्ि हो गए हैं और ऐसे

साधन नीचे िी गई िानलका में िशायए गए पैमाने के अनुसार होंगे:-

िानलका

ननयोनजि व्यनियों की संख्या

नकसी र्ी समय ड्रेंच शॉवर की संख्या

50 िक

2

51 से 100

3

101 से 200

इसके बाि प्रत्‍येक 50 व्‍यनियों के नलए 3+1

स201 to 400

इसके बाि प्रत्‍येक 50 व्‍यनियों के नलए 5+1

401 से ऊपर

इसके बाि प्रत्‍येक 50 व्‍यनियों के नलए 7+1

(ग) पयायप्त संख्या में नेत्र धोने की बोिलें, जो नडनस्टल वॉटर या उपयुि द्रव से र्री हों, उन्हें सुनवधाजनक स्िान पर नस्िि बक्ट्सों या अलमाररयों में रखा जाए ििा उन पर एक

नवनशष्ट नचि लगा हो जो हर समय निखाई िे।

77 धारा 85 के अंतर्गत िभमकों को स्िास््य अभििेख उपिब्ध कराना-

(1) खिरनाक प्रनिया करने वाले प्रत्येक कारखाने का अनधष्ठािा, ननम्ननलनखि शिों के अधीन, श्रनमकों के स्वास््य अनर्लेखों को, नजनमें खिरनाक प्रनिया के संपकय में आए

श्रनमकों के अनर्लेख या, जैसा र्ी मामला हो, नकसी र्ी श्रनमक के नचनकत्सा अनर्लेख शानमल हैं, उनके अवलोकनािय उपलब्ध कराएगा, अिायि्:-

(क) प्रत्येक बारह महीने में एक बार या नचनकत्सा परीक्षर् के िुरंि बाि, जो र्ी पहले हो;

(ख) यनि योग्य नचनकत्सक या नचनकत्सा अनधकारी, जैसा र्ी मामला हो, की यह राय हो नक श्रनमक में संनहिा की िीसरी अनुसूची में नननियष्ट नकसी अनधसूनचि रोग के लक्षर्

और संकेि प्रकट हुए हैं;

(ग) यनि श्रनमक रोजगार छोड िेिा है;

(घ) यनि ननम्ननलनखि प्रानधकाररयों में से कोई एक ऐसा ननिेश िेिा है:--

(i) मुख्य ननरीक्षक-सह-सुनवधाप्रिािा;

28

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(ii) महाननिेशक, कारखाना सलाह सेवा और श्रम संस्िान।

(iii) केंद्रीय या सरकारी स्वास््य प्रानधकरर्;

(iv) कमयचारी के मुआवजे के संबंध में सक्षम प्रानधकारी;

(v) ननिेशक, कमयचारी राज्य बीमा ननगम (नचनकत्सा लार्); और

(2) कमयचारी के खिरनाक प्रनियाओं के संपकय में आने के ररकॉडय सनहि अद्यिन स्वास््य ररकॉडय की एक प्रनि या, जैसा र्ी मामला हो, नचनकत्सा ररकॉडय, कमयचारी से आवेिन

प्राप्त होने पर उसे प्रिान नकए जाएंगे। एक्ट्स-रे प्लेट और अन्य नचनकत्सा ननिान ररपोटय र्ी उसके नचनकत्सक के संिर्य के नलए उपलब्ध कराई जा सकिी हैं।

78 धारा 88 के अंतर्गत कारखानों में अनुमेय स्तर- संभहता या उसके अंतर्गत बनाए र्ए भनयमों के भकसी अन्य प्रािधान की आिश्यकताओं पर प्रभतकूि प्रिाि डािे

भबना, नीचे िी र्ई अनुसूची में भनभिगष्ट अपेिाएँ सिी कारखानों पर िार्ू होंर्ी:-

अनुसूची

1. पररिाषाएँ: इस अनुसूची के प्रयोजन के नलए-

(क) "नमलीग्राम/घन मीटर" का अिय है वायु के प्रनि घन मीटर पिािय का नमलीग्राम;

(ख) "एमपीपीसीएम" का अिय है वायु के प्रनि घन मीटर पिािय के िस लाख कर्;

(ग) "पीपीएम" का अिय है 25 नडग्री सेनल्सयस और 760 नममी पारा िाब पर वायु के प्रनि िस लाख र्ाग आयिन के अनुसार वाष्ट्प या गैस के अंश;

(घ) "एक सामान्य 8 घंटे के काययनिवस और 40 घंटे के कायय सप्ताह के नलए समय-र्ाररि औसि सांद्रिा सीमा, नजसके संपकय में लगर्ग सर्ी श्रनमक, निन-प्रनिनिन, नबना

नकसी प्रनिकूल प्रर्ाव के, बार-बार आ सकिे हैं।"

समय-र्ाररि औसि

C1T1 + C2T2 + ………… CnTn

संकेंद्रर्= ………………………………………..

T1 + T2 +...……………. Tn

जहाँ C1, T1 अवनध (घंटों में) के नलए पिािय की सांद्रिा को िशायिा है;

C2, T2 अवनध (घंटों में) के नलए पिािय की सांद्रिा को िशायिा है; और

Cn, Tn अवनध (घंटों में) के नलए पिािय की सांद्रिा को िशायिा है।

(ङ) "कायय स्िल" का अिय है नकसी कारखाने में वह स्िान जहाँ कोई कमयचारी नकसी र्ी निन नकसी र्ी पाली के िौरान नकसी र्ी समय काम करिा है या उसे काम करने की

आवश्यकिा हो सकिी है।

2. कायग स्र्थि पर पिार्थों की सांद्रता की सीमाएँ: -

(1) अनुसूची की िानलका 1 या 2 में सूचीबि नकसी र्ी पिािय की समय र्ाररि औसि सांद्रिा, नकसी र्ी निन नकसी र्ी पाली के िौरान कारखाने में नकसी र्ी कायय स्िल

पर, उस पिािय के संबंध में नननियष्ट अनुमेय समय र्ाररि औसि सांद्रिा की सीमा से अनधक नहीं होगी:

परन्‍िु यह उपबंनधि है नक िानलका 1 में उनल्लनखि नकसी पिािय के मामले में, नजसके संबंध में अल्पकानलक अनधकिम सांद्रिा की सीमा इंनगि की गई है, ऐसे पिािय की

सांद्रिा, उस पिािय के नलए समय र्ाररि औसि सांद्रिा की अनुमेय सीमा से कम से कम 15 नमनट की अवनध के नलए अनधक हो सकिी है, बशिे नक-

(क) ऐसी अवनधयाँ नजनके िौरान सांद्रिा ननधायररि समय र्ाररि औसि सांद्रिा से अनधक हो जािी है, प्रनि पाली 4 से अनधक नहीं होनी चानहए;

(ख) उच्च जोनखम की नकन्हीं िो ऐसी अवनधयों के बीच का समय अंिराल 60 नमनट से कम नहीं होना चानहए; और

(ग) नकसी र्ी समय हवा में पिािय की सांद्रिा अल्पकानलक अनधकिम सांद्रिा की सीमा से अनधक नहीं होनी चानहए।

(2) िानलका 3 में निए गए नकसी र्ी पिािय के मामले में, नकसी र्ी निन नकसी र्ी समय कारखाने में नकसी र्ी कायय स्िल पर पिािय की सांद्रिा िानलका में नननियष्ट उस पिािय

के नलए जोनखम की सीमा से अनधक नहीं होगी।

(3) उन मामलों में जहाँ िानलका 1 और 3 में उनल्लनखि कुछ पिािों के प्रनि "त्वचा" शब्ि का संकेि निया गया है, त्वचीय मागों, नवशेर् रूप से त्वचा, श्लेष्ट्मा नझल्ली और

आँखों के माध्यम से अवशोर्र् को रोकने के नलए उनचि उपाय नकए जाएँगे क्ट्योंनक इन िानलकाओं में नननियष्ट सीमाएँ उन नस्िनियों के नलए हैं जहाँ संपकय केवल श्वसन पि के

माध्यम से होिा है।

(4)(क) यनि नकसी कायय स्िल की हवा में िानलका 1, 2 या 3 में उनल्लनखि ऐसे पिािों का नमश्रर् है, नजनके नवर्ाि गुर् समान हैं, िो पारी के िौरान इनमें से प्रत्येक पिािय

की समय-र्ाररि सांद्रिा ऐसी होनी चानहए नक जब इन समय-र्ाररि सांद्रिा को उपरोि िानलकाओं में नननियष्ट संबंनधि अनुमेय समय-र्ाररि औसि सांद्रिा से नवर्ानजि नकया

जाए और प्राप्त अंशों को एक साि जोडा जाए, िो कुल योग एक से अनधक नहीं होगा।

C1+ C2+………………… Cn ___________________

L1+ L2……………………. Ln

[PART IV

DELHI GAZETTE : EXTRAORDINARY

29

जहाँ C1, C2.......... Cn िमशिः नवर्ाि पिािों 1, 2------------ और n की समय-र्ाररि सांद्रिा हैं, जो काययस्िल पर माप के बाि ननधायररि की जािी हैं;

और L1, L2…………Ln िमशिः नवर्ाि पिािों 1, 2 और n की अनुमेय समय-र्ाररि औसि सांद्रिा हैं।

(ख) यनि नकसी कायय स्िल की हवा में िानलका 1, 2, 3 में उनल्लनखि पिािों का नमश्रर् है और इनमें समान नवर्ाि गुर् नहीं हैं, िो इनमें से प्रत्येक पिािय की समय-र्ाररि

सांद्रिा उस नवशेर् पिािय के नलए उपयुयि िानलकाओं में नननियष्ट अनुमेय समय-र्ाररि औसि सांद्रिा से अनधक नहीं होगी।

(ग) खंड (क) और (ख) की आवश्यकिाएँ अनुच्छेि 2(1) और 2(2) की आवश्यकिाओं के अनिररि होंगी।

3. पिार्थों की सांद्रता का आकिन कराने की शभक्त-

(1) ननरीक्षक-सह-सुनवधाप्रिािा, नलनखि आिेश द्वारा, नकसी कारखाने के अनधर्ोगी या प्रबंधक को ननिेश िे सकिा है नक वह नकसी नननियष्ट निनि से पूवय, िानलका 1, 2 या

3 में उनल्लनखि नकसी र्ी पिािय की नकसी र्ी काययस्िल पर समय र्ाररि औसि सांद्रिा का आकलन करवाए।

(2) ऐसे आकलन के पररर्ाम ििा ऐसे आकलन के नलए वायु नमूनाकरर् और नवश्लेर्र् हेिु अपनाई गई नवनध, ऐसे आकलन के पूरा होने की निनि से 3 निनों के र्ीिर

ननरीक्षक-सह-सुनवधाप्रिािा को र्ेजी जाएगी और उसका एक अनर्लेख ननरीक्षक-सह-सुनवधाप्रिािा द्वारा ननरीक्षर् के नलए आसानी से उपलब्ध रखा जाएगा।

5. छूट.- यनि नकसी कारखाने या कारखाने के नकसी र्ाग के संबंध में, मुख्य ननरीक्षक-सह-सुनवधाप्रिािा इस बाि से संिुष्ट है नक नवनर्न्न कायय स्िानों पर श्रनमकों के कायय

समय के पैटनय या अन्य पररनस्िनियों के कारर्, कोई र्ी श्रनमक कायय स्िानों पर हवा में, िानलका 1, 2 या 3 में नननियष्ट नकसी पिािय या पिािों के संपकय में इस हि िक

नहीं है जो उसके स्वास््य के नलए हाननकारक होने की आशंका है, िो वह (मुख्य ननरीक्षक-सह-सुनवधाप्रिािा) नलनखि आिेश द्वारा, कारखाने या कारखाने के नकसी र्ाग

को पैराग्राफ 2 की आवश्यकिाओं से, ऐसी शिों, यनि कोई हों, नजन्‍हें वह उसमें नननियष्ट कर सकिा है, के अधीन छूट िे सकिा है।

ताभिका-। ----------------------------------------

जोभखम का अनुमेय स्तर

पिार्थग

समय-िाररत औसत संकेंद्रण

अल्‍पािभध अभधकतम संकेंद्रण

पीपीएम

माइिोग्राम/ माइिोग्राम

र्नमीटर

पीपीएम

माइिोग्राम/ माइिोग्राम

र्नमीटर

एसीनटक एनसड

10

25

15

37

एिोलीन

0.1

0.25

0.3

0.8

एनल्ड्रन-नस्‍कन

-

0.25

0.75

-

अमोननया

25

18

35

27

एनननलन-नस्‍कन

2

10

5

20

एनननसडीन

(ओ-पी-इसोमर)-नस्‍कन

2.1

0.5

-

-

आसेननक और यौनगक

-

0.2

-

-

बेंजीन

10

30

-

-

ब्रोमीन

0.1

0.7

0.3

2

2-ब्यूटेनोन (नमिाइल एनिल) (कीटोनमेक)

200

590

300

885

एन-ब्यूटाइल लेनसएट

150

710

200

950

नद्विीयक/िृिीयक ब्यूटाइल

एसीटेट

200

950

250

1190

कैडनमयम धूल और लवर् (सीडी के रूप में)

-

0.05

-

0.2

कैनल्शयम

-

0.2

-

-

कानबयल (सेनवन)

-

5

-

10

काबो्यूरान (्यूराडान)

-

0.1

-

-

काबोनडाइसल्फाइड-नस्कन

2

60

30

90

काबयन मोनो ऑक्ट्साइड

50

55

400

440

काबयन टेरा क्ट्लोराइड-नस्कन

10

65

20

130

30

DELHI GAZETTE : EXTRAORDINARY

PART IV]

काबोननल क्ट्लोराइड (फॉस्जीन)

0.1

0.4

-

-

क्ट्लोरडेन-नस्कन

-

9.5

-

2

क्ट्लोरोबेंजीन (मोनोक्ट्लोरोबेंजीन)

75

350

-

-

क्ट्लोरीन

1

3

3

9

बाइ-क्ट्लोरोमेनिल ईिर

0.001

-

-

-

िोनमक अम्ल और िोमेट (सीआर के रूप में)

-

0.05

-

-

िोनमयम सेल िोनमक, िोमस लवर्

-

0.05

-

-

िांबा धुआँ

-

0.2

-

-

कपास धूल (कच्चा)

-

0.02

िेसोल, ऑल आइसोमसय- नस्कन

5

22

-

-

साइनाइड (सीएन के रूप में) नस्कन

-

5

-

-

साइनोजेन

10

20

-

-

डीडीटी (डाइक्ट्लोरो डाइफेननल राइक्ट्लोरो इिेन)

-

1

-

3

डेमटन- नस्कन

0.01

0.1

0.03

0.3

डायनज़नॉन- नस्कन

-

0.1

-

0.3

डाइब्यूनटल्िैलेट

-

5

-

10

डाइक्ट्लोरव्स (डीडीवी)- नस्कन

0.1

1

0.3

3

डायनल्ड्रन- नस्कन

-

0.25

-

0.75

डाइनाइरोबेंजीन (ऑल आइसोमसय)-नस्कन

0.15

1

0.5

3

डाइनाइरोट्यूओलीन-नस्कन

-

1.5

-

5

डाइफेननल

0.2

1.5

0.6

4

एंडोसल्फम (िायोडान)-नस्कन

-

0.1

-

0.3

एंनड्रन-नस्कन

-

0.1

-

0.3

एनिल एसीटेट

400

1000

-

-

एनिल अल्कोहल

1000

19000

-

-

एनिल ऐमीन

60

18

-

-

्लोराइड

-

2.5

-

-

्लोरीन

1

2

2

4

हाइड्रोजनाइड-नस्कन

10

11

15

16

हाइड्रोजन सल्फाइड

10

15

16

27

आयरन ऑक्ट्साइड धुआँ

-

5

-

10

आइसोएमाइल एसीटेट

100

525

125

655

आइसोएमाइल अल्कोहल

100

360

125

450

आइसोब्यूनटल अल्कोहल

50

150

75

225

सीसा धुआँ और धूल

-

0.15

-

0.45

नलब्डेन-नस्कन

-

0.5

-

1.5

मैलानियान-नस्कन

-

10

-

-

मैंगनीज ्यूम्‍स

-

1

-

1

पारा

-

0.05

-

0.15

पारा (एनल्कल यौनगक) नस्कन

0.001

0.01

0.003

0.03

नमिाइल अल्कोहल (मेिनॉल)-नस्कन

200

260

250

310

नमिाइल सेलूलोज़-नस्कन (2-मेिॉक्ट्सीएिेनॉल)

25

80

35

120

नमिाइल आइसोब्यूनटल कीटोन-नस्कन

100

410

125

510

नेफिलीन

10

50

15

75

ननकल काबोननल

0.05

0.35

-

-

नाइनरक एनसड

2

5

4

10

नाइनरक ऑक्ट्साइड

25

30

35

45

नाइरोबेंजीन-नस्कन

1

5

2

10

ऑयल नमस्‍ट नमनरल

-

5

-

10

पैरानियोन-नस्कन

-

0.01

-

0.03

नफनेल-नस्कन

5

19

10

38

फोरेट (निमेट)-नस्कन

-

0.05

-

0.2

फॉस्जीन (काबोननल क्ट्लोराइड)

0.1

0.4

1

1

फॉस्फीन

0.3

0.4

1

1

फास्फोरस (पीला)

-

0.1

-

0.3

[PART IV

DELHI GAZETTE : EXTRAORDINARY

31

फास्फोरस पेंटाक्ट्लोराइड

-

1

-

3

फास्फोरस राइक्ट्लोराइड

0.5

3

-

-

नपनिक अम्ल-नस्कन

-

0.1

-

0.3

पाइरीडीन

5

15

10

30

लवर् (नसनलकॉन टेराहाइड्राइड)

0.5

0.7

1

1.5

स्टाइरीन मोनोमर (फेननलएनिलीन)

100

420

125

525

सल्फर डाइऑक्ट्साइड

5

13

-

-

सल््यूररक एनसड

-

1

-

-

टोलूडीन (टोलौल)-नस्कन

100

375

150

500

ओ-टोलूडीन

5

22

10

44

राइक्ट्लोरोएनिलीन

100

535

150

800

नवनाइलक्ट्लोराइड

5

10

-

-

वेनल्डंग धुआँ (नाइरस ऑक्ट्साइड)

-

5

-

-

ज़ाइलीन (o-m-p-आइसोमसय)-नस्कन

100

435

150

655

िानलका – 2

ि.सं पिािय

अनुमेय समय औसि संकेंद्रर्

1 नसनलका

क.

निस्टलीन

i.

क्ट्वाट्यज

1. धूल कर्ों के संिर्य में = 1060/ (%क्ट्वाट्यज+10) एमपीपीसीएम

2. श्वसन योग्य धूल में= 10/(% श्वसन योग्य क्ट्वाट्यज़ +2) नमलीग्राम/घन मीटर

3. कुल धूल = 30/(% क्ट्वाट्यज+3) नमलीग्राम/घन मीटर

ii.

निस्टोबलाइट

क्ट्वाट्यज के प्रनि िी गई सीमा का आधा

iii.

नरडमाइट

जैसा उपरोक्ट्‍ि

iv

नसनलका संलनयि

क्ट्वाट्यज के समान

v

नत्रपोली

आइटम (2) क्ट्वाट्यज के समान

ख

अमोफयस

705 एमपीपीसीएम

2 नसनलकेट नजसमें र्ार के नहसाब से 1% से कम मुि नसनलका हो

(क)

5 माइिोन से अनधक लंबे एस्बेस्टस फाइबर

i.

अमोसाइट

0.5 फाइबर/घन सेंटीमीटर

ii.

निसेनटलक

2 फाइबसय/सेंटीमीटर

iii.

निस्टोबलाइट

0.2 फाइबर/घन सेंटीमीटर

iv.

अन्य रूप

2 फाइबर/घन सेंटीमीटर

ख

मीका

705 एमपीपीसीएम

(ग)

खननज ऊन फाइबर

10 नम.ग्रा. प्रनि घन मीटर

(घ)

पोलायइट

1060 एमपीपीसीएम

(ङ)

पोटयलैंड सीमेंट

1060 एमपीपीसीएम

(च)

सोप स्‍टोन

705 एमपीपीसीएम

(छ)

टैल्क (नोटाबीनटफॉमय)

785 एमपीपीसीएम

(ज)

टैल्क (रेशेिार)

एस्बेस्टस के समान सीमाएँ

(झ)

रेमलाइट

एस्बेस्टस के समान सीमाएँ

3 कोल डस्‍ट

32

DELHI GAZETTE : EXTRAORDINARY

PART IV]

1

हवा में मौजूि धूल के नलए नजसमें वजन के नहसाब से 5% से कम नसनलक

डाइऑक्ट्साइड हो

2 नमग्रा/घन नम.ग्रा.

2

हवा में मौजूि धूल के नलए नजसमें वजन के नहसाब से 5% से अनधक नसनलक

डाइऑक्ट्साइड हो

क्ट्वाट्यज के संिर्य में मि (2) में सूत्रों द्वारा ननधायररि स

सीमा

िानलका-3

पिािय

एक्ट्सपोज़र की अनुमेय सीमा

पीपीएम

नमलीग्राम/घन नम.ग्रा.

एनसनटक एनहाइड्राइड

5

20

ओ-डाइक्ट्लोरोबेंजीन

50

300

फॉमेनल्डहाइड

2

3

हाइड्रोजन क्ट्लोराइड

5

7

मैंगनीज और यौनगक (नमनरल की िरह)

-

5

नाइरोजन डाइऑक्ट्साइड

5

9

नाइरोनग्लसरीन-नस्कन

0.2

2

पोटेनशयम हाइड्रॉक्ट्साइड

-

2

सोनडयम हाइड्रॉक्ट्साइड

-

2

राइनाइरोटोल्यूईन (टीएनटी)

-

0.5

79 धारा 90 के अधीन अपीि के भिए समुभचत प्राभधकारी - धारा 90 के अधीन प्रस्तुत अपीि मुख्य भनरीिक-सह-सुनवधाप्रिािा को या उन मामलों में जहां अपील

नकया गया आिेश मुख्य ननरीक्षक-सह-सुनवधाप्रिािा द्वारा पाररि आिेश है, श्रम आयुि, निल्ली को की जा सकेगी और यह ज्ञापन के रूप में होगी नजसमें आिेश के प्रनि आपनत्त

के आधारों का संक्षेप में उल्लेख होगा और उसके साि आिेश की एक प्रनि संलग्न होगी।

िार्-VI

िृिारोपण

80 धारा 92 की उपधारा (1) के खंड (क) के अंतर्गत बार्ानों में िभमकों के भिए सुभिधा;-

1. श्रनमकों के नलए आवास- प्रत्येक ननयोिा बागान में रहने वाले श्रनमक और उसके पररवार के नलए काययस्िल के यिासंर्व ननकट आवास उपलब्ध कराएगा।

2. आवास के मानक और नवननिेश- बागानों में श्रनमकों के नलए सर्ी आवास ऐसे मानकों और नवननिेशों के अनुरूप होंगे नजन्हें सरकार धारा 17 के अंिगयि गनठि बोडय की

नसफाररश पर अनुमोनिि कर सकिी है।

3 आिास के भिए स्र्थि-

(1) आवास सूखी, अच्छी जल ननकासी वाली र्ूनम पर उपलब्ध कराया जाएगा जो बागान से िूरी संबंधी आवश्यकिा के अनुरूप हो, और नजसमें उनचि िूरी के र्ीिर

स्वास््यवधयक पेयजल की आपूनिय हो।

(2) नजस क्षेत्र में आवास उपलब्ध कराया जािा है, उसके आसपास पयायप्त प्रकाश व्यवस्िा उपलब्ध कराई जाएगी।

(3) ननयोिा उस क्षेत्र में जहाँ घर नस्िि हैं, वहां पहुँचने वाले मागों और रास्िों को, साि ही उस क्षेत्र में सीवर और नानलयों को र्ी, अच्छी नस्िनि में रखेगा।

(4) ननयोिा सर्ी घरों के आसपास के क्षेत्र को कचरे और मलमूत्र से मुि रखेगा और शौचालयों और नानलयों की प्रनिनिन सफाई करेगा और उनमें या उनके आस-पास के

सर्ी कचरे को एकनत्रि करेगा, हटाएगा और स्वच्छिापूवयक उसका ननपटान करेगा।

(5) ननयोिा द्वारा मल-मूत्र ननपटान के साि शौचालयों की पयायप्त सुनवधाएँ सुनननिि की जाएँगी।

4. र्रों का रखरखाि-

(1) ननयोिा, अपने स्वयं के व्यय पर, श्रनमकों के आवास के नलए प्रिान नकए गए सर्ी घरों को अच्छी और सुरनक्षि नस्िनि में बनाए रखेगा और वानर्यक ििा ऐसी अन्य

मरम्मि करेगा जो समय-समय पर आवश्यक हो।

(2) नकसी घर में रहने वाला कोई र्ी कमयचारी, और संनहिा के िहि ननयुि कोई ननरीक्षक-सह-सुनवधाप्रिािा, ननयोिा के ध्यान में घर की नस्िनि में कोई र्ी िोर् लाएगा जो

उसे श्रनमक के स्वास््य और सुरक्षा के नलए खिरनाक बनािा है। ननयोिा का यह कियव्य होगा नक वह इसे यिाशीघ्र ठीक करे।

[PART IV

DELHI GAZETTE : EXTRAORDINARY

33

(3) ननयोिा सर्ी घरों में कम से कम एक बार चूना पुिवाएगा और सर्ी िरवाजों, नखडनकयों और अन्य लकडी के ढाँचों पर िीन साल में एक बार वाननयश या पेंनटंग करवाएगा।

चूना पुिाई या पेंनटंग की िारीखों का ररकॉडय एक रनजस्टर में रखा जाएगा।

(4) यनि कोई ननयोिा उप-ननयम (1), (2) या (3) की अपेक्षाओं का पालन करने में नवफल रहिा है, िो

मुख्य ननरीक्षक-सह-सुनवधाप्रिािा मरम्मि करवा सकिा है और ननयोिा से र्ू-राजस्व के बकाया के रूप में उसकी लागि वसूल कर सकिा है।

5. आवास नकराया मुि होगा- ननयोिा द्वारा अपने बागान में रहने वाले श्रनमकों और उनके पररवारों को प्रिान नकए गए आवास के नलए कोई नकराया नहीं नलया जाएगा।

6. रोजगार समानप्त के बाि आवास का उपयोग-

1. जब कोई कमयचारी ननयोिा की सेवा में मर जािा है, या सेवाननवृत्त हो जािा है, या स्िानांिरर् पर चला जािा है, या त्यागपत्र िे िेिा है या छुट्टी पर चला जािा है या जब

उसकी सेवाएं समाप्त हो जािी हैं, िो वह या उसका पररवार नीचे िी गई अवनध िक घर को अपने पास रख सकिा है--

क. मृत्यु, स्िानांिरर्, सेवा समानप्त, सेवाननवृनत्त या त्यागपत्र की नस्िनि में, िो महीने से अनधक की अवनध नहीं;

ख. छुट्टी की नस्िनि में, छुट्टी की अवनध के नलए; और

ग. ऐसे मामले में जहाँ नकसी कमयचारी की सेवामुनि नववानिि है और मामला नकसी औद्योनगक न्यायानधकरर् या न्यायालय में ले जाया गया है, िब िक जब िक मामले का

अंनिम रूप से ननपटारा नहीं हो जािा।

2. यनि कोई कमयचारी उपयुयि अवनध की समानप्त पर मकान खाली करने में नवफल रहिा है और जब उसके पररवार का कोई सिस्य काम नहीं कर रहा हो िब र्ी उसमें रहना

जारी रखिा है, िो वह ननयोिा को ऐसा नकराया िेने के नलए उत्तरिायी होगा जैसा नक मुख्य ननरीक्षक-सह-सुनवधाप्रिािा द्वारा ननधायररि नकया जा सकिा है, जो उसके वेिन के

10 प्रनिशि से अनधक नहीं होगा।

81 धारा 92 की उपधारा (1) के खंड (ख) के अंतर्गत बार्ान िभमकों के भिए भशशुर्ृह-

(1) प्रत्येक बागान में, जहाँ पचास या अनधक श्रनमक काययरि हैं या नपछले बारह महीनों में नकसी र्ी निन काययरि िे, ननयोिा 2 से 6 वर्य की आयु के बच्चों के उपयोग के

नलए नशशुगृह उपलब्ध कराएगा और उसका रखरखाव करेगा।

(2) प्रत्येक नशशुगृह, उसमें रहने वाले बच्चों के मािा-नपिा के नलए सुनवधाजनक रूप से सुलर् होगा।

(3) नशशुगृह में रहने वाले प्रत्येक बच्चे के नलए कम से कम पंद्रह वगय फुट का फशय क्षेत्र होगा।

(4) नजस र्वन में नशशुगृह नस्िि है, वह सुदृढ संरचना वाला और बेहिर आच्छानिि क्षेत्रफल वाला होना चानहए।

(5) नशशुगृह र्वन की योजना मुख्य ननरीक्षक-सह-सुनवधाप्रिािा द्वारा ननधायररि मानक योजना या योजनाओं के अनुसार होगी।

(6) नशशुगृह में उपयुि फनीचर जैसे लेटने के नलए खाट, बैठने के नलए बेंच, िो वर्य से कम आयु के प्रत्येक बच्चे के नलए एक झूला आनि उपलब्ध होंगे, और नखलौने ििा

अन्य खेल सामग्री उपलब्ध कराई जाएगी, जैसा नक मुख्य ननरीक्षक-सह-सुनवधाप्रिािा द्वारा सरकार के पूवय अनुमोिन से नननियष्ट नकया जा सकिा है।

(7) बच्चों के नलए उपयुि रूप से बाड लगा हुआ और छायािार खुला खेल का मैिान उपलब्ध कराया जाएगा।

(8) ननयोिा बच्चों की िेखर्ाल के नलए, उनके मािा-नपिा की अनुपनस्िनि में, नशशुगृह प्रर्ारी के रूप में एक मनहला को ननयुि करेगा, नजसके पास ऐसी योग्यिाएँ और

प्रनशक्षर् होगा, जैसा नक सरकार द्वारा अनुमोनिि नकया जा सकिा है।

82 धारा 92 की उपधारा (1) के खंड (र्) के अंतर्गत िभमकों के बच्चों के भिए शैभिक सुभिधाएँ- प्रत्येक ननयोिा, यनि उसके बागान में छह से बारह वर्य की आयु के

श्रनमकों के बच्चों की संख्या पच्चीस से अनधक है, िो बच्चों को प्रािनमक नशक्षा प्रिान करने के नलए एक प्रािनमक नवद्यालय की व्यवस्िा और रखरखाव करेगा:

परन्‍िु, यह उपबंनधि है नक नकसी ननयोिा को प्रािनमक नवद्यालय की व्यवस्िा और रखरखाव करने से छूट नमल सकिी है, यनि उसके बागान में काम करने वाले श्रनमकों के

ननवास स्िान से एक नकलोमीटर की िूरी के र्ीिर, ननशुल्‍क नशक्षा के नलए, सरकार या नकसी स्िानीय ननकाय के प्रत्यक्ष प्रबंधन के अधीन कोई प्रािनमक या उच्‍चिर स्‍िरीय

नवद्यालय हो, और उसमें उसके बागान में काम करने वाले श्रनमकों के छह से बारह वर्य की आयु के बच्चों को प्रवेश िेने के नलए पयायप्त सीटें उपलब्‍ध हों।

भिद्यािय में उपकरण.- ननयोिा या ननयोिाओं, जैसा र्ी मामला हो, द्वारा ननयम 134 के िहि संचानलि प्रत्येक प्रािनमक नवद्यालय के नलए ऐसे शैनक्षक और अन्य उपकरर्

प्रिान नकए जाएंगे, जो राज्य नशक्षा नवर्ाग द्वारा आवश्यक समझे जाएं।

िी जाने िािी फीस- प्रािनमक नवद्यालय में पढने वाले श्रनमकों के बच्चों से कोई शुल्क नहीं नलया जाएगा।

34

DELHI GAZETTE : EXTRAORDINARY

PART IV]

83 धारा 92 की उपधारा (1) के खंड (र्) के अंतर्गत बीमारी ित्ता-

(1) प्रत्येक कमयचारी अपने ननयोिा से प्रमानर्ि बीमारी के प्रत्येक निन के नलए वर्य में कुल चौिह निनों की अवनध के नलए सामान्य रूप से र्ुगिान की जाने वाली मजिूरी की

िर से बीमारी र्त्ता प्राप्त करने का हकिार होगा।

परंिु, जहाँ नकसी कानून के नवद्यमान प्रावधानों के अंिगयि बीमारी र्त्ता अनधक है, वहाँ इस ननयम के कारर् कमयचाररयों को ऐसे उच्च र्त्ते से वंनचि नहीं नकया जाएगा।

(2) उप-ननयम (1) में नननियष्ट बीमारी र्त्ता कमयचारी की इच्छा पर या िो मजिूरी के रूप में साप्तानहक अनग्रम र्ुगिान के समय या प्रमानर्ि बीमारी से ठीक होने पर काम पर

वापस आने के बाि कमयचारी को िेय मजिूरी की पहली नकस्ि के साि निया जाएगा।

(3) बीमारी प्रमार् पत्र ननयोिा द्वारा ननयुि नचनकत्सा अनधकारी या योग्य नचनकत्सा व्यवसायी द्वारा बीमारी र्त्ता प्राप्त करने के हकिार प्रत्येक कमयचारी को जारी नकया जाएगा।

(4) यनि कोई कमयचारी नकसी ऐसे निन काम पर आिा है नजसके नलए उसे बीमारी र्त्ता निया गया है, िो उसे कोई बीमारी र्त्ता नहीं निया जाएगा।

84 धारा 92 की उपधारा (1) के खंड (ङ) के अंतर्गत मनोरंजनात्मक सुभिधाएं-

(1) प्रत्येक ननयोिा ननम्ननलनखि सुनवधाएं प्रिान करेगा और उनका रखरखाव करेगा,-

(क) ननवासी श्रनमकों के प्रत्येक एक सौ पचहत्तर पररवारों या उसके नकसी र्ाग के नलए एक मनोरंजन केंद्र नजसमें नडश कनेक्ट्शन सनहि टेलीनवजन और श्रनमकों और उनके

पररवारों के नलए इनडोर खेलों की व्यवस्िा हो और ऐसी अन्य सुनवधाएं, जो मुख्य ननरीक्षक-सह-सुनवधाकिाय द्वारा सरकार के पूवय अनुमोिन से नननियष्ट की जाएं; और

(ख) श्रनमकों और उनके पररवारों के नलए आवश्यक खेल उपकरर्ों सनहि एक खेल का मैिान या नवनर्न्‍न खेलों के मैिान:

(2) प्रत्येक मनोरंजन केंद्र, जो प्रित्‍ि एवं अनुरनक्षि नकया जाना है, श्रनमकों के आवास के यिासंर्व ननकट नस्िि होगा।

85 (1) धारा 93 की उपधारा (2) और (3) के अंतर्गत खतरनाक पिार्थों के उपयोर् या संचािन में मभहिाओं और भकशोरों के भिए सुरिा उपाय - नकसी र्ी गर्यविी

मनहला या नकशोर को नकसी र्ी खिरनाक पिािय के संचालन की अनुमनि नहीं िी जाएगी।

(2) ननयोिा के बागानों में कीटनाशकों, रसायनों और नवर्ाि पिािों के उपयोग, संचालन, र्ंडारर् और पररवहन की ननगरानी के नलए योग्यिाएँ - धारा 93 की उपधारा (3)

के प्रयोजनों के नलए, नकसी र्ी व्यनि को ननयोिा द्वारा िब िक ननयुि नहीं नकया जाएगा जब िक नक वह व्यनि,-

(i) रसायन नवज्ञान या कृनर् में बी.एससी. की नडग्री न रखिा हो;

(ii) श्रनमकों की र्ार्ा बोलने और समझने में सक्षम हो; और

(iii) ऐसे क्षेत्र में िीन वर्य का अनुर्व रखिा हो।

86 धारा 93 की उप-धारा (4) के अंतर्गत सुरिा उपाय और सुरभित कायग पद्धभतयाँ-

ननयोिा द्वारा कीटनाशकों, रसायनों और नवर्ाि पिािों के र्ंडारर् के स्िान, सुरक्षा और पहुँच के संबंध में ननम्ननलनखि सुरक्षा उपाय और सुरनक्षि कायय पिनियाँ सुनननिि की

जाएँगी, अिायि्:-

(क) र्ंडार या र्ंडारर् क्षेत्र, अन्य र्वनों, घरों और खाद्य पिािों के र्ंडारर् से अलग होगा;

(ख) र्ंडारर् क्षेत्र में आकनस्मक या अननधकृि पहुँच को रोका जाएगा;

(ग) र्ंडार को ऐसी सुरनक्षि कुंडी से बंि और व्‍यवनस्िि रखा जाएगा, नजसे बच्‍चे न खोल पाएं िानक बच्चों, काययस्िल पर आने वाले आगंिुकों और उन आम लोगों को

जोनखम से बचाया जा सके, जो कीटनाशकों, रसायनों और नवर्ाि पिािों के खिरों से पररनचि नहीं होिे हैं;

(घ) पयायप्त प्राकृनिक या यांनत्रक वेंनटलेशन प्रिान नकया जाएगा;

(ङ) नाबिान में जल ननकासी के साि अर्ेद्य फशय, कंिीट की चौखटें और िरवाजे, कंिीट या

ब्लॉक की िीवारें, जो पयायप्त ऊँचाई िक फैली होंगी िानक ररसाव को रोका जा सके और शेनल्फंग को सुरनक्षि बनाया जा सके;

(च) िीवारें (या बांध) और िरवाज़े की चौखट इिनी ऊँची होंगी नक पैकेज्ड िरल कीटनाशकों की कुल मात्रा का पच्चीस प्रनिशि ररसाव रोका जा सके;

(छ) ररसाव और साफ पानी को नाबिान या गड्ढे में ननकालने का प्रावधान नकया जाएगा नजसमें कीटनाशक, रसायन और नवर्ाि पिािय, साफ करने वाली सामग्री और धुलाई

का पानी रखा जा सके;

(ज) धुलाई के पानी की आपूनिय आसानी से उपलब्ध कराई जाएगी;

(झ) नवपरीि िीवारों में, बांध की ऊँचाई से ऊपर, वेंट के साि अच्छा प्राकृनिक िॉस-्लो वेंनटलेशन प्रिान नकया जाएगा;

(ञ) पिािों को खराब होने से बचाने के नलए ठंडे िापमान पर संग्रनहि नकया जाएगा; और

(ट) उत्पािों को नमी से बचाया जाएगा िानक पैकेनजंग और लेबनलंग खराब न हो।

[PART IV

DELHI GAZETTE : EXTRAORDINARY

35

87 धारा 93 की उपधारा (5) के अंतर्गत बार्ान िभमकों की भचभकत्सा परीिा और स्िास््य अभििेख-

(1) बागान में ननयोनजि प्रत्येक श्रनमक, जो कीटनाशकों, जीवार्ुनाशकों, रसायनों और नवर्ाि पिािों के संपकय में आिा है, की नचनकत्सा परीक्षा एक योग्य नचनकत्सक द्वारा

ननम्ननलनखि िरीके से की जाएगी, अर्ागत्: -

(i) रोजगार से पहले एक बार, नकसी नवशेर् कायय को करने के नलए व्यनि की शारीररक योग्यिा सुनननिि करने के नलए;

(ii) बारह महीने की अवनध में एक बार, सर्ी श्रनमकों की स्वास््य नस्िनि का पिा लगाने के नलए

उन व्यावसानयक स्वास््य खिरों के संबंध में नजनसे वे प्रर्ानवि होिे हैं; और

(iii) पूवय-ननयोजन और पूवोि रूप से की गई आवनधक नचनकत्सा परीक्षा का नववरर् स्वास््य रनजस्टर में प्रपत्र-05 में िजय नकया जाएगा।

(2) नकसी र्ी व्यनि को योग्य नचनकत्सक द्वारा प्रपत्र-24 में निए गए योग्यिा प्रमार् पत्र के नबना पहली बार ननयोनजि नहीं नकया जाएगा। यनि योग्य नचनकत्सा व्यवसायी नकसी

व्यनि को ननयोनजि करने के नलए अयोग्य घोनर्ि करिा है, िो ऐसे व्यनि को ननरीक्षक-सह-सुनवधाप्रिािा के समक्ष अपील करने का अनधकार होगा, जो मामले को नचनकत्सा

अनधकारी के पास र्ेजेगा, नजसकी राय इस संबंध में अंनिम होगी।

(3) योग्य नचनकत्सा व्यवसायी द्वारा ननयोनजि नकसी व्यनि की नकसी असामान्यिा या अनुपयुििा का खुलासा करने वाले नकसी र्ी ननष्ट्कर्य की सूचना िुरंि नचनकत्सा अनधकारी

को िी जाएगी, जो संबंनधि कमयचारी की जांच करेगा और िीस निनों के र्ीिर ननयोिा को अपने ननष्ट्कर्ों से अवगि कराएगा। यनि नचनकत्सा अनधकारी की राय है नक इस प्रकार

जांचे गए कमयचारी को स्वास््य सुरक्षा के नलए रोजगार से हटाना आवश्यक है, िो वह ननयोिा को ििनुसार ननिेश िेगा, जो उि कमयचारी को उसी रोजगार में ननयोनजि नहीं

करेगा। परन्‍िु, इस प्रकार हटाए गए कमयचारी को वैकनल्पक स्िान प्रिान नकया जाएगा, जब िक नक वह नचनकत्सा अनधकारी की राय में पूरी िरह से अक्षम न हो, ऐसी नस्िनि में

प्रर्ानवि कमयचारी का उनचि पुनवायस नकया जाएगा।

(4) उप-ननयम (3) के अंिगयि रोजगार से हटाए गए श्रनमकों को नचनकत्सा अनधकारी से नफटनेस प्रमार् पत्र प्राप्त करने और स्वास््य रनजस्टर में इस आशय की प्रनवनष्टयाँ करने

के बाि ही उसी रोजगार में पुनिः ननयोनजि नकया जा सकेगा।

(5) कमयचारी के कीटनाशकों, जीवार्ुनाशकों, रसायनों और नवर्ाि पिािों के संपकय में आने के ररकॉडय सनहि अद्यिन स्वास््य ररकॉडय की एक प्रनि या, जैसा र्ी मामला हो,

नचनकत्सा ररकॉडय, कमयचारी से आवेिन प्राप्त होने पर उसे प्रिान नकए जाएंगे। एक्ट्स-रे प्लेट और अन्य नचनकत्सा ननिान ररपोटय र्ी उसके योग्य नचनकत्सक के संिर्य के नलए उपलब्ध

कराई जा सकिी हैं।

88 धारा 93 की उपधारा (7) के खंड (क) के अंतर्गत बार्ान िभमकों के भिए धुिाई, स्नान और क्िोक-रूम की सुभिधाएँ - (1) प्रत्येक बागान में सर्ी श्रनमकों के

उपयोग के नलए, प्रत्येक पंद्रह व्यनियों के नलए एक नल उपलब्ध कराया जाएगा और उसका रखरखाव नकया जाएगा, नजसमें झुकने की व्यवस्िा वाले कंटेनर में िरल साबुन

और प्रर्ावी सफाई के नलए नेल ब्रश या अन्य उपयुि साधन शानमल होंगे। ऐसी सुनवधाएँ आसानी से सुलर् होंगी और उन्हें स्वच्छ और स्वास््यकर नस्िनि में रखा जाएगा।

(2) यनि मनहलाओं के नलए ऊपर बिाई गई धुलाई सुनवधाएँ प्रिान की जािी हैं, िो ऐसी सुनवधाएँ उनके नलए अलग होंगी और ऐसी सुनवधाओं में हर समय पयायप्त गोपनीयिा

सुनननिि की जाएगी।

(3) नकसी बागान का प्रत्येक ननयोिा, जहाँ उसमें काययरि श्रनमक कीटनाशकों, कीटनाशकों, रसायनों और नवर्ाि पिािों का संचालन करिे हैं और पचास या अनधक श्रनमक

काययरि हैं, सर्ी श्रनमकों के नलए

नश्ट में काम करने वाले, मेस रूम की सुनवधाएँ प्रिान करेगा जो अच्छी िरह हवािार हों और नजनमें ठंडे और स्वच्छ पेयजल की सुनवधाओं के साि-साि मेज और बैठने की

सुनवधाएँ र्ी उपलब्ध हों।

(4) उप-ननयम (3) में उनल्लनखि सुनवधाओं में सफाई और धुलाई के नलए उपयुि व्यवस्िाएँ शानमल होंगी और उन्हें स्वच्छ एवं स्वास््यकर नस्िनि में रखा जाएगा।

(5) बागानों के प्रत्येक ननयोिा को, जहाँ काययरि श्रनमक कीटनाशकों, जीवार्ुनाशकों, रसायनों और नवर्ाि पिािों का संचालन करिे हैं, अपने श्रनमकों के नलए लॉकर सनहि

क्ट्लॉकरूम की सुनवधा प्रिान करनी होगी। प्रत्येक श्रनमक को िो लॉकर प्रिान नकए जाएँगे, एक काम के कपडों के नलए और िूसरा व्यनिगि

कपडों के नलए और लॉकर इस प्रकार होने चानहए नक कपडों को लटकाकर रखा जा सके।

(1)

उप-ननयम (5) के अंिगयि प्रिान की गई क्ट्लॉक रूम सुनवधाएँ, जहाँ िक संर्व हो, उप-ननयम (1) के अंिगयि धुलाई के नलए प्रिान की गई सुनवधाओं के ननकट

नस्िि होंगी। यनि क्ट्लॉकरूम के ननकट धुलाई सुनवधाएँ स्िानपि करना संर्व नहीं है, िो क्ट्लॉकरूम में सफाई और धुलाई के नलए पयायप्त और उपयुि व्यवस्िाएँ होंगी।

89 धारा 93 की उपधारा (7) के खंड (ख) के अंतर्गत बार्ान िभमकों के भिए सुरिात्मक िस्त्र और उपकरण- लेबल, सामग्री सुरक्षा डेटा शीट और जोनखम मूल्यांकन

के अनुसार व्यनिगि सुरक्षा उपकरर् चुनिे समय, ननम्ननलनखि बािों पर नवचार नकया जाएगा, अिायि्:-

(क) गियन और कलाई िक बटन लगे सूिी ओवरऑल;

(ख) कीटनाशक प्रनिरोधी जलरोधक एप्रन, जो सांद्रर् नमलािे या डालिे समय पहने जाने चानहए;

36

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(ग) िस्िाने (कीटनाशक प्रनिरोधी), अनधमानििः गॉन्ट्नलट, नजन्हें रसायनों को संर्ालिे या उपयोग करिे समय पहना जाना चानहए;

(घ) चौडे नकनारे वाली धोने योग्य टोपी; यनि िूनर्ि हो, िो टोपी को िुरंि उिारकर पुन: उपयोग से पहले धोना चानहए;

(ङ) रबर या पॉलीनवनाइल क्ट्लोराइड जैसे जूिे; अनिररि सुरक्षा प्रिान करने वाले जलरोधक लेनगंग, चमडे के जूिे जो कीटनाशक को अवशोनर्ि कर सकिे हैं और उच्च मात्रा

में उपयोग के िौरान कीटनाशक के संपकय में आने से बचा सकिे हैं;

(च) नमश्रर् या डालिे समय फेस शील्ड या छींटे रोधी चश्मा;

(छ) चश्मा और उपयुि अनुमोनिि श्वासयंत्र, खासकर यनि स्प्रे बहाव के संपकय में आने की आशंका हो; और

(ज) बंि स्िानों में काम करिे समय फुल फेस एयर-लाइन रेनस्परेटर, सीनमि स्िानों में प्रवेश के नलए लेबल और सामग्री सुरक्षा डेटा शीट स्व-नननहि श्वास उपकरर् पर ननर्यर

करिा है।

90 धारा 93 की उपधारा (9) के अंतर्गत बार्ानों में एहभतयाती सूचनाएँ-

नीचे नननियष्ट प्रारूप में और काययरि अनधकांश श्रनमकों की र्ार्ा में मुनद्रि एहनियािी सूचना बागान में नकसी प्रमुख स्िान पर लगाई जाएगी जहाँ श्रनमक इसे आसानी से और

सुनवधाजनक रूप से पढ सकें।

एहनियािी सूचना

1. इस बागान में प्रयुि रसायन खिरनाक हैं।

2. इस क्षेत्र में धूम्रपान, िंबाकू चबाना, खाना या पीना प्रनिबंनधि है।

3. इस क्षेत्र में कोई र्ी खाद्य सामग्री या पेय नहीं लाया जाएगा।

4. इनमें से कुछ रसायन त्वचा के माध्यम से अवशोनर्ि हो सकिे हैं और नवर्ाििा पैिा कर सकिे हैं।

5. र्ोजन से पहले अच्छी िरह नहाया जाना चानहए।

6. इस क्षेत्र में काम करिे समय आपूनिय नकए गए सुरक्षात्मक उपकरर्ों का उपयोग नकया जाना चानहए।

7. शरीर के नकसी र्ी र्ाग या फशय पर रसायनों के नगरने पर उसे िुरंि पानी से धोया जाना चानहए।

8. सर्ी श्रनमकों को अपने स्वास््य की सुरक्षा के नलए ननयनमि रूप से ननधायररि नचनकत्सा परीक्षर् के नलए उपनस्िि होना होगा।

अध्याय-X

अपराध और दंड

91 धारा 111 की उपधारा (3) के अंतर्गत अपीि प्राभधकारी और अपीि का तरीका -

अपील के साि संनहिा की धारा 111 की उपधारा (2) के अंिगयि लगाए गए जुमायने के िो प्रनिशि की िर से शुल्क संलग्न होगा, नजसका र्ुगिान ऑनलाइन पोटयल के माध्यम

से फॉमय-28 में नकया जाएगा।

92 धारा 114 की उपधारा (1) के अंतर्गत भनभिगष्ट प्राभधकृत अभधकारी द्वारा अपराधों के शमन का तरीका-

(1) धारा 114 की उपधारा (1) के अंिगयि अपराधों के शमन के प्रयोजनों के नलए सरकार द्वारा अनधसूनचि अनधकारी, धारा 114 की उपधारा (1) के अंिगयि शमनीय

अपराधों के नलए इलेक्ट्रॉननक रूप से या अन्यिा शमन नोनटस जारी करेगा।

(2) इस प्रकार नोनटस प्राप्त व्यनि, नोनटस प्राप्त होने के पंद्रह निनों के र्ीिर, इलेक्ट्रॉननक रूप से या अन्यिा अनधकारी को आवेिन कर सकिा है और इलेक्ट्रॉननक हस्िांिरर्

द्वारा या अन्यिा संपूर्य शमन रानश जमा कर सकिा है।

(3) शमन अनधकारी, शमन रानश प्राप्त होने के िस निनों के र्ीिर, ऐसे व्यनि को, नजससे शमन नोनटस की संिुनष्ट में ऐसी रानश प्राप्त हुई है, एक शमन प्रमार्पत्र जारी करेगा।

(4) यनि इस प्रकार नोनटस प्राप्त व्यनि अनर्योजन शुरू होने से एक महीने पहले िक शमन रानश जमा करने में नवफल रहिा है, िो अनर्योजन सक्षम न्यायालय के समक्ष चलाया

जाएगा।

[PART IV

DELHI GAZETTE : EXTRAORDINARY

37

अध्याय-XI

सामाभजक सुरिा भनभध

93 धारा 115 की उपधारा (2) के अंतर्गत सामाभजक सुरिा भनभध -

(1)

धारा 114 की उपधारा (4) में नननियष्ट अपराध के प्रशमन से प्राप्त रानश और संनहिा की धारा 111 की उपधारा (6) में नननियष्ट शानस्ि की रानश, सामानजक

सुरक्षा संनहिा 2020 (केंद्रीय

अनधननयम 36, 2020) की धारा 141 की उपधारा (5) के अंिगयि स्िानपि निल्ली असंगनठि कमयकार सामानजक सुरक्षा नननध में जमा की जाएगी।

(2) यह नननध असंगनठि कमयकारों के कल्यार् के नलए, सामानजक सुरक्षा संनहिा 2020 की धारा 109 के अंिगयि बनाई गई सामानजक सुरक्षा योजनाओं और उसके अंिगयि

बनाए गए ननयमों के अंिगयि व्यय की जाएगी।

िाष्टरीय िाजधािी क्षेत्र निल्ली के उपिाज्यपाल

के आिेशािुसाि एवों उिके िाम से,

अश क कुमाि, सनचव (श्रम)

38

DELHI GAZETTE : EXTRAORDINARY

PART IV]

खतरनाक कायों के भिए अनुसूची

(सुरिा, कल्याणकारी सुभिधाएँ, सुरिात्मक उपकरण और भचभकत्सा जाँच आभि)

[भनयम 65 िेखें]

अनुसूची-I

िाभतत जि और उससे संबंभधत प्रभियाओं का भनमागण

1. मशीनों की बाडबंिी - बोिलों या साइफन र्रने वाली सर्ी मशीनों को इस प्रकार बनाया, स्िानपि या घेरा जाएगा नक जहाँ िक संर्व हो, फटी हुई बोिल या

साइफन का कोई टुकडा कारखाने में काययरि नकसी र्ी व्यनि से टकराने से रोका जा सके।

2. फेस र्ाडग और िस्ताने -

(1) अनधर्ोगी बोिलों या साइफन र्रने में लगे सर्ी व्यनियों के उपयोग के नलए ननम्ननलनखि की व्यवस्िा करेगा और उन्हें अच्छी नस्िनि में रखेगा:-

(क) चेहरे, गियन और गले की सुरक्षा के नलए उपयुि फेस गाडय; और

(ख) पूरे हाि और र्ुजाओं की सुरक्षा के नलए िोनों र्ुजाओं के नलए उपयुि िस्िाने।

परन्‍िु यह उपबंनधि है नक:-

(i) अनुच्छेि 2 (1) वहाँ लागू नहीं होगा जहाँ बोिलें नकसी ऐसी स्वचानलि मशीन से र्री जािी हैं जो इस प्रकार बनाई गई हो नक फटी हुई बोिल का कोई टुकडा बाहर

न ननकल सके।

(ii) जहाँ मशीन इस प्रकार नननमयि है नक बोिल बनाने वाले का केवल एक ही हाि उस िक काम करिे समय खिरे के संपकय में आिा है, वहाँ उस हाि के नलए गौंटलेट

प्रिान करने की आवश्यकिा नहीं है जो खिरे के संपकय में नहीं है।

(2) अनधर्ोगी कॉनकिंग, िाउननंग, स्िूइंग, वायररंग, फॉइनलंग, कैप्सूनलंग, साइनटंग या लेबनलंग में लगे सर्ी व्यनियों के उपयोग के नलए बोिलों या साइफन की अच्छी

नस्िनि प्रिान करेगा और उन्हें बनाए रखेगा -

(क) चेहरे, गियन और गले की सुरक्षा के नलए उपयुि फेस-गाडय; और

(ख) िोनों र्ुजाओं के नलए उपयुि गौंटलेट जो र्ुजा और कम से कम आधी हिेली और अंगूठे और िजयनी के बीच के स्िान की सुरक्षा करें।

(3) फेस गाडय और गौंटलेट पहनना - इस अनुसूची के पैराग्राफ 2 में नननियष्ट नकसी र्ी प्रनिया में लगे सर्ी व्यनि, ऐसी प्रनियाओं में काम करिे समय, उि पैराग्राफ के

प्रावधानों के िहि प्रिान नकए गए फेस गाडय और गौंटलेट पहनेंगे।

अनुसूची-II

िोभमयम, भनकि, कैडभमयम, जस्ता, तांबा, चांिी, सोना आभि धातुओं के अम्ि, िार या ििण युक्त इिेक्रोिाइट के उपयोर् द्वारा धातु िस्तुओं का

इिेक्रोिाइभटक िेपन या ऑक्सीकरण।

1. पररिाषाएँ - इस अनुसूची के प्रयोजनों के नलए –

(क) "नवद्युि अपघटनी प्रनिया" का अिय है िोनमयम, ननकल, कैडनमयम, जस्िा, िाँबा, चाँिी, सोना आनि धािुओं के अम्ल, क्षार या लवर् युि नवद्युि अपघटनी का

उपयोग करके धािु वस्िुओं का नवद्युि अपघटनी लेपन या ऑक्ट्सीकरर्।

(ख) "बाि" का अिय है नवद्युि अपघटनी प्रनिया या नकसी र्ी परविी प्रनिया के नलए प्रयुि कोई पात्र; और

(ग) "ननयोनजि" का अिय है बाि से द्रव के संपकय में आने वाली नकसी र्ी प्रनिया में काययरि।

2. एग्जॉस्ट ड्रैफ्ट - (1) प्रत्येक पात्र पर एक कुशल एग्जॉस्ट ड्रै्ट लागू नकया जाएगा, नजसमें नवद्युि अपघटनी प्रनिया की जािी है। ऐसा ड्रा्ट यांनत्रक साधनों द्वारा

प्रिान नकया जाएगा और प्रनिया में ननकलने वाले वाष्ट्प या स्प्रे पर उद्गम नबंिु के यिासंर्व ननकट संचानलि होगा। एग्जॉस्ट ड्रै्ट उपकरर् का ननमायर्, व्यवस्िा और

रखरखाव इस प्रकार नकया जाएगा नक वाष्ट्प या स्प्रे ऐसे नकसी र्ी कमरे या स्िान में प्रवेश न कर सके, जहाँ कायय नकया जािा है।

(2) धूल ननकालने या िबाने के सर्ी उपकरर्ों की हर छह महीने में कम से कम एक बार नकसी सक्षम व्यनि द्वारा जाँच और परीक्षर् नकया जाएगा, और ऐसी जाँच और

परीक्षर् द्वारा प्रकट नकसी र्ी िोर् को यिाशीघ्र ठीक नकया जाएगा।

(3) ऐसी जाँच और परीक्षर् के नववरर् वाला एक रनजस्टर प्रपत्र संख्या 26 में रखा जाएगा।

3. र्िगिती मभहिाओं और भकशोरों से संबंभधत भनषेध - नकसी र्ी गर्यविी मनहला या नकशोर को बाि में काम करने के नलए ननयोनजि या अनुमनि नहीं िी जाएगी।

4. कायग किों का फशग - बाि वाले प्रत्येक कायय कक्ष का फशय पानी से अर्ेद्य होना चानहए। फशय को अच्छी और समिल नस्िनि में रखा जाएगा और निन में कम से

कम एक बार धोया जाएगा।

[PART IV

DELHI GAZETTE : EXTRAORDINARY

39

5. सुरिात्मक उपकरण –

(1) अनधर्ोगी नकसी र्ी ऐसी प्रनिया में काययरि सर्ी व्यनियों के उपयोग के नलए ननम्ननलनखि सुरक्षात्मक उपकरर्ों की वस्िुएँ अच्छी और स्वच्छ नस्िनि में उपलब्ध

कराएगा और उनका रखरखाव करेगा, नजसमें उनके बाि से ननकलने वाले िरल पिािय के संपकय में आने की आशंका हो और ऐसे उपकरर् संबंनधि व्यनियों द्वारा पहने

जाने चानहए:

(i) जलरोधक एप्रन और नबब; और

(ii) बाि में वास्िव में काम करने वाले व्यनियों के नलए, ढीले-ढाले रबर के िस्िाने और रबर के जूिे या अन्य जलरोधक जूिे, और रासायननक चश्मे।

(iii) अनधर्ोगी सर्ी ननयोनजि व्यनियों के उपयोग के नलए सुरक्षात्मक उपकरर्ों के र्ंडारर् और सुखाने के नलए उपयुि स्िान उपलब्ध कराएगा और उनका रखरखाव

करेगा।

6. जि सुभिधाएँ –

(1) नवद्युि अपघटनी प्रनिया और उससे संबंनधि प्रनियाओं में काययरि सर्ी व्यनियों के उपयोग के नलए अच्छी मरम्मि की व्यवस्िा की जाएगी और उनका रखरखाव

नकया जाएगा:

(क) एक कवर वॉश प्‍लेस, नजसमें या िो-

(i) एक नचकनी, अर्ेद्य सिह वाला एक कुंड हो नजसमें अपनशष्ट पाइप लगा हो, और नजसकी लंबाई इिनी हो नक नकसी र्ी समय काययरि प्रत्येक 5 व्यनियों के नलए

कम से कम 60 सेमी पानी की अनुमनि हो, और कुंड के ऊपर नलों या जेट से 60 सेमी से अनधक के अंिराल पर पानी की ननरंिर आपूनिय हो, या

(ii) नकसी र्ी समय काययरि प्रत्येक ऐसे 5 व्यनियों के नलए कम से कम एक वॉश बेस हो, नजसमें अपनशष्ट पाइप लगा हो और नजसमें पानी की ननरंिर आपूनिय हो।

(iii) प्रनिनिन नवीनीकृि नकए जाने वाले साफ िौनलये और साबुन या अन्य उपयुि सफाई सामग्री की पयायप्त आपूनिय हो।

(2) उप-अनुच्छेि 1 में िी गई सुनवधा के अनिररि, आई फाउंटेन युि एक अनुमोनिि प्रकार का आपािकालीन शावर प्रिान नकया जाएगा और उसे अच्छी काययशील

नस्िनि में बनाए रखा जाएगा।

जब र्ी आवश्यक हो, ननरंिर जल आपूनिय सुनननिि करने के नलए, आपािकालीन उपयोग के नलए स्वच्छ जल के स्रोि के रूप में 1500 लीटर क्षमिा का र्ंडारर् टैंक

उपलब्ध कराया जाएगा।

7. चेतािनी परट्टका - नीचे नननियष्ट प्रारूप में और ननयोनजि अनधकांश श्रनमकों की र्ार्ा में मुनद्रि एक चेिावनी परट्टका कारखाने में एक प्रमुख स्िान पर नचपका िी

जाएगी, जहां इसे श्रनमकों द्वारा आसानी से और सुनवधाजनक रूप से पढा जा सके।

चेतािनी सूचना

(इिेक्रोिाइभटक प्िेभटंर्)

(i) इस संयंत्र में प्रयुि रसायन संक्षारक और नवर्ैले होिे हैं।

(ii) इस क्षेत्र में धूम्रपान, िंबाकू चबाना, खाना या पीना प्रनिबंनधि है। इस क्षेत्र में कोई र्ी खाद्य पिािय या पेय पिािय नहीं लाया जाएगा।

(iii) इनमें से कुछ रसायन त्वचा के माध्यम से अवशोनर्ि हो सकिे हैं और नवर्ाििा का कारर् बन सकिे हैं।

(iv) र्ोजन से पहले अच्छी िरह नहाना चानहए।

(v) इस क्षेत्र में काम करिे समय निए गए सुरक्षात्मक उपकरर्ों का उपयोग नकया जाना चानहए।

(vi) शरीर के नकसी र्ी र्ाग या फशय पर रसायनों के नगरने पर उसे िुरंि पानी से धो िेना चानहए।

40

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(vii) सर्ी कमयचाररयों को अपने स्वास््य की सुरक्षा के नलए ननयनमि रूप से ननधायररि नचनकत्सा जाँच के नलए उपनस्िि होना चानहए।

8. भचभकत्सा अभधकारी द्वारा भचभकत्सा परीिण –

(1) नवद्युि अपघटनी प्रनियाओं में काययरि प्रत्येक कमयचारी की, उसके प्रिम ननयोजन से पूवय, एक नचनकत्सा अनधकारी द्वारा जाँच की जाएगी। इस परीक्षर् में छािी का

एक्ट्स-रे और -

(क) िोनमयम प्लेनटंग के मामले में, नानसका पट नछद्रर् की जाँच और मूत्र में िोनमयम की जाँच शानमल होगी।

(ख) ननकल प्लेनटंग के मामले में, मूत्र में ननकल की जाँच; और

(ग) कैडनमयम प्लेनटंग के मामले में, मूत्र में कैडनमयम और -2 मैिोग्लोब्युनलन की जाँच।

(2) नकसी र्ी कमयचारी को नकसी र्ी नवद्युि अपघटनी प्रनिया में िब िक ननयोनजि नहीं नकया जाएगा जब िक नक उसे नचनकत्सा अनधकारी द्वारा ऐसे रोजगार के नलए

उपयुि प्रमानर्ि न कर निया जाए।

(3) नवद्युि अपघटनी प्रनियाओं में ननयोनजि प्रत्येक कमयचारी की नचनकत्सा अनधकारी द्वारा वर्य में कम से कम एक बार पुनिः जाँच की जाएगी, परन्‍िु, कैडनमयम, िोनमयम

और ननकल-प्लेनटंग प्रनियाओं में काययरि कमयचाररयों के मामले में यह जाँच हर छह महीने में एक बार की जाएगी। ऐसी पुनिः जाँच में, जहाँ र्ी नचनकत्सा अनधकारी उनचि

समझे, उप-अनुच्छेि (1) के अंिगयि नननियष्ट परीक्षर् शानमल होंगे, नजसमें छािी का एक्ट्स-रे शानमल नहीं होगा, नजसे सामान्यििः िीन वर्ों में एक बार से पहले कराने की

आवश्यकिा नहीं होगी।

(4) नचनकत्सा अनधकारी, नकसी कमयचारी की जाँच के बाि, प्रपत्र-24 में एक स्वास््य प्रमार्पत्र जारी करेगा। कमयचारी की ऐसी जाँच और पुन: जाँच का ररकॉडय कारखाने

के अनधर्ोगी की अनर्रक्षा में रखा जाएगा। उप-अनुच्छेि (1) और (2) के अंिगयि की गई प्रत्येक जाँच का ररकॉडय, नजसमें जाँच की प्रकृनि और पररर्ाम शानमल हैं,

नचनकत्सा अनधकारी द्वारा प्रपत्र-05 में एक स्वास््य रनजस्टर में र्ी िजय नकया जाएगा।

(5) स्वास््य प्रमार्पत्र और स्वास््य रनजस्टर ननरीक्षक-सह-सुनवधाकिाय द्वारा ननरीक्षर् के नलए आसानी से उपलब्ध रखा जाएगा।

(6) यनि नकसी र्ी समय नचनकत्सा अनधकारी की राय में कोई कमयचारी नवद्युि अपघटनी प्रनियाओं में रोजगार के नलए इस आधार पर अब उपयुि नहीं है नक उसमें बने

रहने से उसके स्वास््य को खिरा हो सकिा है, िो वह उि प्रमार्पत्र और स्वास््य रनजस्टर में अपने ननष्ट्कर्ों का ररकॉडय िजय करेगा। उन िस्िावेज में उनके ननष्ट्कर्ों की

प्रनवनष्ट में वह अवनध र्ी शानमल होनी चानहए नजसके नलए वह मानिे हैं नक उि व्यनि उि प्रनियाओं में काम करने के नलए अयोग्य है। ऐसी पररनस्िनियों में अयोग्य

घोनर्ि नकए गए व्यनि को वैकनल्पक ननयुनि सुनवधा प्रिान की जाएगी, जब िक नक वह नचनकत्सा अनधकारी की राय में पूरी िरह से अक्षम न हो, ऐसी नस्िनि में प्रर्ानवि

व्यनि का उनचि पुनवायस नकया जाएगा।

(7) कोई र्ी व्यनि जो उप-अनुच्छेि (6) में उनल्लनखि अनुसार काम करने के नलए अयोग्य पाया गया हो, उसे उि प्रनियाओं में िब िक पुनिः ननयोनजि या काम करने

की अनुमनि नहीं िी जाएगी जब िक नक नचनकत्सा अनधकारी आगे की जांच के बाि उसे इन प्रनियाओं में रोजगार के नलए पुनिः योग्य प्रमानर्ि न कर िे।

अनुसूची-III

भिद्युत संचायकों का भनमागण और मरम्मत

1. अपिाि- यह अनुसूची नवद्युि संचायकों या उनके उन र्ागों के ननमायर् या मरम्मि पर लागू नहीं होगी नजनमें सीसा या सीसे का कोई यौनगक न हो; या पररसर में नकसी

नस्िर बैटरी का नहस्सा बनने वाले नकसी संचायक की मरम्मि पर लागू नहीं होगी।

2.पररिाषाएँ - इस अनुसूची के प्रयोजनों के नलए-

(क) "सीसा प्रनिया" का अिय है सीसा या सीसा युि नकसी र्ी सामग्री को नपघलाना, ढलाई, नचपकाना, सीसा जलाना, या कोई अन्य कायय, नजसमें छंटाई, या नचपकाई

गई प्लेटों का कोई अन्य नघसाव या काटना शानमल है, नजसमें सीसे के नकसी र्ी ऑक्ट्साइड का उपयोग, गनि या हेरफेर या उसके संपकय में आना शानमल है;

(ख) "सीसे के कच्चे ऑक्ट्साइड का हेरफेर" से िात्पयय सीसे की नकसी र्ी ऐसी प्रनिया से है नजसमें सीसे के कच्चे ऑक्ट्साइड का नकसी र्ी प्रकार का हेरफेर या संचलन

शानमल है, नसवाय इसके नक उसे नकसी पात्र में या नकसी उपकरर् के माध्यम से एक ऑपरेशन से िूसरे ऑपरेशन में ले जाया जाए;

3. र्िगिती मभहिाओं और भकशोरों से संबंभधत भनषेध - नकसी र्ी गर्यविी मनहला या नकशोर को नकसी र्ी सीसा प्रनिया में या ऐसे नकसी र्ी कमरे में ननयोनजि या

काम करने की अनुमनि नहीं िी जाएगी नजसमें सीसा के कच्चे ऑक्ट्साइड का प्रसंस्करर् या पेनस्टंग का कायय नकया जािा है।

4. कुछ प्रभियाओं का पृर्थक्करण - ननम्ननलनखि प्रत्येक प्रनिया को इस प्रकार और ऐसी शिों के िहि नकया जाएगा नजससे एक िूसरे से और अन्य प्रनियाओं से

[PART IV

DELHI GAZETTE : EXTRAORDINARY

41

प्रर्ावी पृिक्ट्करर् सुनननिि हो सके:-

क. सीसा के कच्चे ऑक्ट्साइड का प्रसंस्करर्;

ख. पेनस्टंग;

ग. पेस्ट की गई प्लेटों को सुखाना;

घ. इसके संबंध में आवश्यक रूप से नकए जाने वाले सीसा टननिंग (टैनकंग) के साि ननमायर्; और

ङ. पेस्ट की गई प्लेटों को नपघलाना।

5. िायु स्र्थान - प्रत्येक कमरे में, नजसमें सीसा प्रनिया की जािी है, काययरि प्रत्येक व्यनि के नलए कम से कम 14.2 घन मीटर वायु स्िान होना चानहए, और इस वायु

स्िान की गर्ना में 3.75 मीटर से अनधक ऊँचाई को ध्यान में नहीं रखा जाएगा।

6. िेंभटिेशन - प्रत्येक कायय कक्ष में पयायप्त आकार के इनलेट और आउटलेट उपलब्ध कराए जाएंगे

िानक कमरे के सर्ी नहस्सों में कुशल वेंनटलेशन सुनननिि और बनाए रखा जा सके।

7. पेभस्टंर् कि में िभमकों के बीच िूरी - प्रत्येक पेनस्टंग कक्ष में नकसी र्ी पेस्टर की कायय नस्िनि के केंद्र और उसके ननकटिम काम करने वाले पेस्टर के बीच की िूरी

1.5 मीटर से कम नहीं होगी।

8. कायग किों का फशग –

(1) प्रत्येक कमरे का फशय, नजसमें सीसा प्रनिया की जािी है, -

(क) सीमेंट या इसी प्रकार की सामग्री का होगा िानक वह नचकना और पानी से अर्ेद्य हो;

(ख) अच्छी नस्िनि में रखा जाएगा; और

(ग) उस सामग्री, संयंत्र या अन्य अवरोधों से मुि रखा जाएगा जो कमरे में की जाने वाली प्रनिया के नलए आवश्यक नहीं हैं या उसमें उत्पानिि नहीं होिे हैं।

(2) नग्रड कानस्टंग शॉप के अलावा ऐसे सर्ी कमरों में फशय को प्रनिनिन साफ नकया जाएगा और उस समय पानी से अच्छी िरह नछडकाव नकया जाएगा जब कमरे में कोई

अन्य कायय नहीं नकया जा रहा हो।

(3) नग्रड कानस्टंग शॉप में फशय को प्रनिनिन साफ नकया जाएगा।

(4) उप-अनुच्छेि (1), (2) और (3) की आवश्यकिाओं पर प्रनिकूल प्रर्ाव डाले नबना, जहाँ सीसा के कच्चे ऑक्ट्साइड या पेनस्टंग का संचालन नकया जािा है, फशय

को र्ी

(क) कायय करिे समय लगािार नम रखा जाएगा;

(ख) जल ननकासी के नलए उपयुि और पयायप्त व्यवस्िा प्रिान की जाएगी; और

(ग) प्रनिनिन नली पाइप के माध्यम से अच्छी िरह से धोया जाना चानहए।

9. िकग-बेंच - वे वकय-बेंच नजन पर कोई र्ी सीसा प्रनिया की जािी है, उनकी –

(i) सिह नचकनी होगी और उन्हें अच्छी नस्िनि में रखा जाएगा

(ii) उन सर्ी सामनग्रयों या संयंत्रों से मुि रखा जाएगा जो उस प्रनिया के नलए आवश्यक नहीं हैं या उसमें उत्पानिि नहीं हैं और नग्रड कानस्टंग शॉप में मौजूि वकय-बेंचों

के अलावा अन्य सर्ी वकय-बेंचों को:

(क) पूरी िरह से नम करने के बाि या सक्ट्शन सफाई उपकरर् के माध्यम से उस समय िैननक रूप से साफ नकया जाएगा जब वहां कोई अन्य कायय नहीं नकया जा रहा हो

और

(ख) नग्रड कानस्टंग शॉप में मौजूि सर्ी वकय-बेंचों को िैननक रूप से साफ नकया जाएगा;

42

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(iii) नचपकाने के नलए उपयोग की जाने वाली प्रत्येक वकय-बेंच -

(क) पूरी िरह से शीट लेड और अन्य अर्ेद्य सामग्री से ढकी होगी;

(ख) उर्रे हुए नकनारे होंगे;

(ग) नचपकाने के िौरान लगािार नम रखी जाएगी।

10. एग्जॉस्ट ड्रैफ्ट -

(1) ननम्ननलनखि प्रावधान कुशल एग्जॉस्ट ड्रै्ट के उपयोग के नबना नहीं नकए जाएँगे:-

(क) सीसा या सीसा युि पिािय का नपघलना।

(ख) सीसे के कच्चे ऑक्ट्साइड का हेरफेर, जब िक नक नकसी बंि उपकरर् में न नकया जाए िानक

कायय-कक्ष में धूल के प्रवेश को रोका जा सके।

(ग) नचपकाना

(घ) धूल उत्पन्न करने वाली प्लेटों की छंटाई, ब्रनशंग, फाइनलंग या कोई अन्य नघसाव या कटाई।

(ङ) सीसा जलाना, इसके अलावा-

(i) ननमायर् कक्ष में "टैनकंग"

(ii) सेल केसों के नलए सीसा अस्िर बनाने हेिु रासायननक िहन, इस प्रकार नकया जाना नक कुशल ननकास का प्रयोग अव्यावहाररक हो। ऐसा एग्जॉस्ट ड्रै्ट यांनत्रक

साधनों द्वारा प्रर्ानवि होगा और उत्सनजयि धूल या धुएं पर यिासंर्व कायय करेगा िानक उसे उस कमरे की हवा में प्रवेश करने से रोका जा सके नजसमें व्यनि काम करिा

है।

(2) धूल के ननष्ट्कर्यर् या िमन के नलए सर्ी उपकरर्ों की कम से कम एक बार प्रत्येक छह माह में एक सक्षम व्यनि द्वारा जाँच और परीक्षर् नकया जाएगा, और ऐसी

जाँच और परीक्षर् द्वारा प्रकट नकसी र्ी िोर् को यिाशीघ्र ठीक नकया जाएगा।

(3) ऐसी जाँच और परीक्षर् के नववरर् वाला एक रनजस्टर प्रपत्र संख्या 26 में रखा जाएगा।

11. भपर्िने िािे बतगनों से भनकिने िािे धुएं और र्ैसें - नकसी र्ी नपघलने वाले बियन को गमय करने से उत्पन्न िहन उत्पािों को ऐसे कमरे में नहीं जाने निया जाएगा

नजसमें लोग काम करिे हैं।

12. कचरे के भिए कंटेनर - कसकर नफट होने वाले ढक्ट्कन वाला एक उपयुि पात्र उपलब्ध कराया जाएगा और प्रत्येक नपघलने वाले बियन से कचरा ननकालिे समय

उसका उपयोग नकया जाएगा। ऐसे पात्र को कायय कक्ष में ढके रखा जाएगा, नसवाय इसके नक जब कचरा उसमें जमा हो रहा हो।

13. सीसा अपभशष्ट के भिए कंटेनर - प्रत्येक कायय कक्ष में एक उपयुि पात्र उपलब्ध कराया जाएगा नजसमें पुरानी प्लेटें और अपनशष्ट पिािय, नजनसे सीसा जमा हो

सकिा है, जमा नकए जाएंगे।

14. रैक और शेल्फ सुखाने का कमरा - नकसी र्ी सुखाने वाले कमरे में उपलब्ध कराए गए रैक और शेल्फ फशय से 2.4 मीटर से अनधक और 60 सेमी से अनधक

चौडे नहीं होंगे।

बशिे नक िोनों िरफ से लगाए गए या खींचे गए रैक या शेल्फ की कुल चौडाई 1.2 मीटर से अनधक न हो। ऐसे रैक और शेल्फ को पूरी िरह से गीला करने के बाि ही

साफ नकया जाएगा, जब िक नक इस उद्देश्य के नलए कुशल सक्ट्शन सफाई उपकरर् का उपयोग न नकया जाए।

15. भचभकत्सा अभधकारी द्वारा भचभकत्सा परीिण -

(1) सीसा प्रसंस्करर् संयंत्रों में काययरि प्रत्येक कमयचारी की उसके प्रिम ननयोजन के 15 निनों के र्ीिर एक नचनकत्सा अनधकारी द्वारा जांच की जाएगी। इस परीक्षर् में

मूत्र और रि में सीसा, मूत्र में एएलए, हीमोग्लोनबन की मात्रा, कोनशकाओं की नस्टपनलंग और नस्िरिा परीक्षर् शानमल होंगे। नकसी र्ी कमयचारी को कारखाने में उसके

प्रिम ननयोजन के 15 निनों के बाि िब िक काम करने की अनुमनि नहीं िी जाएगी जब िक नक उसे नचनकत्सा अनधकारी द्वारा ऐसे ननयोजन के नलए उपयुि प्रमानर्ि न

कर निया जाए।

(2) उि प्रसंस्करर् संयंत्रों में काययरि प्रत्येक कमयचारी की प्रत्येक 3 कैलेंडर महीनों में कम से कम एक बार एक नचनकत्सा अनधकारी द्वारा पुन: जांच की जाएगी और

[PART IV

DELHI GAZETTE : EXTRAORDINARY

43

ऐसी पुन: जांच में, जहां र्ी नचनकत्सा अनधकारी उनचि समझे, उप-अनुच्छेि (1) में नननियष्ट परीक्षर् शानमल होंगे।

(3) नचनकत्सा अनधकारी, कमयचारी की जांच करने के बाि, फॉमय-24 में एक नफटनेस प्रमार् पत्र जारी करेगा। नकए गए परीक्षर् और पुन: परीक्षर्ों का ररकॉडय

प्रमार्पत्र में िजय नकया जाएगा और प्रमार्पत्र कारखाने के अनधर्ोगी की अनर्रक्षा में रखा जाएगा। उप-अनुच्छेि (1) और (2) के अंिगयि नकए गए प्रत्येक परीक्षर् का

ररकॉडय, नजसमें परीक्षर्ों की प्रकृनि और पररर्ाम शानमल हैं, नचनकत्सा अनधकारी द्वारा प्रपत्र-25 में एक स्वास््य रनजस्टर में र्ी िजय नकया जाएगा।

(4) नफटनेस प्रमार्पत्र और स्वास््य रनजस्टर को ननरीक्षक-सह-सुनवधाप्रिािा द्वारा ननरीक्षर् के नलए आसानी से उपलब्ध रखा जाएगा।

(5) यनि नकसी र्ी समय नचनकत्सा अनधकारी की राय में कोई कमयचारी उि प्रनियाओं में रोजगार के नलए अब उपयुि नहीं है, इस आधार पर नक इसमें बने रहने से

कमयचारी के स्वास््य को नवशेर् खिरा होगा, िो वह अपने ननष्ट्कर्ों को उि प्रमार्पत्र और स्वास््य रनजस्टर में िजय करेगा। इन िस्िावेजों में उसके ननष्ट्कर्ों की प्रनवनष्ट में

वह अवनध र्ी शानमल होनी चानहए नजसके नलए वह मानिा है नक उि व्यनि उि प्रनियाओं में काम करने के नलए अयोग्य है।

(6) उप-अनुच्छेि (5) में उनल्लनखि कायय करने के नलए अयोग्य पाए गए नकसी र्ी व्यनि को उि प्रनियाओं में िब िक पुनिः ननयोनजि या कायय करने की अनुमनि नहीं

िी जाएगी, जब िक नक नचनकत्सा अनधकारी, आगे की जाँच के बाि, उसे पुनिः उन प्रनियाओं में ननयोजन के नलए योग्य प्रमानर्ि न कर िे।

16. सुरिात्मक िस्त्र- सर्ी ननयोनजि व्यनियों के नलए सुरक्षात्मक वस्त्र उपलब्ध कराए जाएँगे और अच्छी नस्िनि में बनाए रखे जाएँगे -

(क) कच्चे सीसे के ऑक्ट्साइड का संचालन

(ख) पेनस्टंग

(ग) ननमायर् कक्ष और संबंनधि व्यनि द्वारा ऐसे वस्त्र पहने जाएँगे। सुरक्षात्मक वस्त्र में जलरोधक एप्रन और जलरोधक जूिे शानमल होंगे; और आवश्यकिानुसार, कच्चे

सीसे के ऑक्ट्साइड के संचालन या पेनस्टंग में ननयोनजि व्यनियों के नसर के आवरर् को प्रनिनिन धोया जाएगा।

17. िोजन कि - सीसा प्रनिया में काययरि और ननयनमि अंिराल पर पररसर में रहने वाले सर्ी व्यनियों के उपयोग के नलए एक उपयुि र्ोजन कक्ष उपलब्ध कराया

जाएगा और उसका रखरखाव नकया जाएगा, नजसमें पयायप्त मेजें और बेंचें होंगी।

र्ोजन कक्ष एक नजम्मेिार व्यनि के प्रर्ार में होगा और उसे साफ-सुिरा रखा जाएगा।

18. क्िॉक रूम - सीसा प्रनिया में काययरि सर्ी व्यनियों के उपयोग के नलए एक क्ट्लॉक रूम उपलब्ध कराया जाएगा और उसका रखरखाव नकया जाएगा - (क) काम

के घंटों के िौरान उिारे जाने वाले कपडों के नलए एक क्ट्लॉक रूम, नजसमें गीले कपडों को सुखाने की पयायप्त व्यवस्िा हो। ऐसी व्यवस्िा र्ोजन कक्ष से अलग होगी।

(ख) उप-ननयम (16) के अनुसार सुरक्षात्मक कपडों के र्ंडारर् के नलए अलग और उपयुि व्यवस्िा होगी।

19. धुिाई सुभिधाएँ - (1) सीसा प्रनिया में काययरि सर्ी व्यनियों के उपयोग के नलए धुलाई सुनवधाएँ स्वच्छ और अच्छी नस्िनि में उपलब्ध और अनुरनक्षि होंगी -

(क) एक धुलाई स्िान नजसमें या िो -

(i) एक नचकनी अर्ेद्य सिह वाला एक कुंड नजसमें प्लग रनहि अपनशष्ट पाइप लगा हो, और नजसकी लंबाई इिनी हो नक नकसी र्ी समय काययरि प्रत्येक पाँच ऐसे

व्यनियों के नलए कम से कम 60 सेंटीमीटर जगह हो, और कुंड के ऊपर नल या जेट से 60 सेंटीमीटर से अनधक के अंिराल पर पानी की ननरंिर आपूनिय हो; या

(ii) नकसी र्ी समय काययरि प्रत्येक पाँच ऐसे व्यनियों के नलए कम से कम एक वॉश बेनसन, नजसमें अपनशष्ट पाइप और प्लग लगा हो और नजसमें पयायप्त पानी की

आपूनिय हो।

(iii) उपयुि सामग्री से बने साफ िौनलयों की पयायप्त आपूनिय, नजन्हें प्रनिनिन नवीनीकृि नकया जािा है,

नजसमें पेस्टसय और कच्चे सीसे के ऑक्ट्साइड के प्रसंस्करर् में काययरि व्यनि के मामले में प्रत्येक काययकिाय के नलए एक अलग नचनिि िौनलया शानमल होगा; और

iv) साबुन या अन्य उपयुि सफाई सामग्री और नेल ब्रश की पयायप्त आपूनिय होगी।

(ख) इसके अनिररि, उन कमरों के ननकट धुलाई के साधन उपलब्ध कराए जाएंगे, नजनमें सीसे के कच्चे ऑक्ट्साइड या पेनस्टंग का काम नकया जािा है, बशिे मुख्य

ननरीक्षक-सह-सुनवधाप्रिािा द्वारा नलनखि सूचना िी जाए।

20. धोने के भिए अनुमत समय - प्रत्येक र्ोजन से पहले और निन के कायय की समानप्त से पहले, ननयनमि र्ोजन के समय के अनिररि, कम से कम िस नमनट, कच्चे

सीसे के ऑक्ट्साइड के प्रसंस्करर् या पेनस्टंग में काययरि प्रत्येक व्यनि को धोने के नलए निए जाएँगे।

44

DELHI GAZETTE : EXTRAORDINARY

PART IV]

परन्िु यनि ऐसे प्रत्येक व्यनि के नलए 60 सेंटीमीटर की एक नाँि वाला बेनसन है, िो यह अनुच्छेि लागू नहीं होगा।

21. स्नान की सुभिधाएँ - मुख्य ननरीक्षक-सह-सुनवधाकिाय की संिुनष्ट के अनुसार पयायप्त स्नान स्िान, कच्चे सीसे के ऑक्ट्साइड के प्रसंस्करर् या पेनस्टंग में लगे सर्ी

व्यनियों को प्रिान नकया जाएगा और साबुन और साफ िौनलये की पयायप्त आपूनिय की जाएगी।

22. कायग-किों में खाद्य पिार्थग, पेय आभि भनभषद्ध - नकसी र्ी कमयचारी द्वारा नकसी र्ी कायय-कक्ष में, जहाँ कोई सीसा प्रनिया की जािी है, न िो खाद्य पिािय, पेय,

पान और सुपारी या िंबाकू का सेवन नकया जाएगा और न ही लाया जाएगा।

अनुसूची-IV

कांच भनमागण

1. छूट- यनि मुख्य ननरीक्षक-सह-सुनवधाप्रिािा नकसी कारखाने या नकसी प्रकार की प्रनिया के संबंध में संिुष्ट है नक, कायय की नवशेर् नवनधयों या कारखाने की नवशेर्

पररनस्िनियों के कारर् या अन्यिा, इस अनुसूची की नकसी र्ी आवश्यकिा को उसमें काययरि व्यनियों को खिरे के नबना ननलंनबि या नशनिल नकया जा सकिा है, या

यह नक इस अनुसूची या इसके नकसी र्ाग का अनुप्रयोग नकसी र्ी कारर् से अव्यावहाररक है, िो वह नलनखि रूप में प्रमार् पत्र द्वारा ऐसे ननलंबन या नशनिलीकरर् को,

जैसा नक प्रमार् पत्र में िशाया गया है, ऐसी अवनध के नलए और ऐसी शिों पर अनधकृि कर सकिा है, नजन्हें वह उनचि समझे।

2. पररिाषाएँ - इस अनुसूची के प्रयोजन के भिए -

(क) "कुशल एग्जॉस्ट ड्रै्ट " का अिय है स्िानीयकृि वेंनटलेशन जो गैस, वाष्ट्प, धूल या धुएं को हटाने के नलए यांनत्रक साधनों द्वारा नकया जािा है िानक

उन्हें (जहाँ िक संर्व हो, आमिौर पर प्रचनलि वायुमंडलीय पररनस्िनियों में) नकसी र्ी ऐसे स्िान की हवा में फैलने से रोका जा सके जहाँ कायय नकया जा रहा हो। कोई

र्ी ड्रा्ट कुशल नहीं माना जाएगा जो उस नबंिु पर उत्पन्न धुएं को हटाने में नवफल रहिा है जहाँ से ऐसी गैस, वाष्ट्प, धुआं या धूल उत्पन्न होिी है;

(ख) "सीसा यौनगक" का अिय है गैलेना के अलावा सीसे का कोई र्ी यौनगक, जो नीचे वनर्यि िरीके से उपचाररि होने पर, हाइड्रोक्ट्लोररक अम्ल के जलीय घोल में

घुलनशील सीसा यौनगक की एक मात्रा िेिा है, नजसकी गर्ना सीसा मोनोऑक्ट्साइड के रूप में करने पर, नवश्लेर्र् में नलए गए र्ाग के शुष्ट्क र्ार के पाँच प्रनिशि से

अनधक होिी है।

उपचार की नवनध इस प्रकार होगी:

सामग्री की एक िौली हुई मात्रा, नजसे 100 नडग्री सेनल्सयस पर सुखाया गया है और अच्छी िरह नमलाया गया है, को उसके र्ार के 1,000 गुना हाइड्रोक्ट्लोररक अम्ल

के जलीय घोल के साि, नजसमें र्ार के अनुसार 0.25 प्रनिशि हाइड्रोजन क्ट्लोराइड हो, सामान्य िापमान पर एक घंटे िक लगािार नहलाया जाएगा। इसके बाि इस घोल

को एक घंटे िक रखा रहने निया जाएगा और नफर छान नलया जाएगा। नफर इस स्पष्ट नफलटर में मौजूि लेड लवर् को लेड सल्फाइड के रूप में अवक्षेनपि नकया जाएगा

और लेड सल्फेट के रूप में िोला जाएगा।

3. एग्जॉस्ट ड्रैफ्ट - (1) ननम्ननलनखि प्रनियाएँ केवल कुशल एग्जॉस्ट ड्रै्ट या ऐसी अन्य शिों के अधीन ही की जाएँगी नजन्हें मुख्य ननरीक्षक-सह-सुनवधाप्रिािा द्वारा

अनुमोनिि नकया जा सकिा है:-

(क) कच्चे माल को नमलाकर "बटोर" बनाना;

(ख) काँच या काँच की नकसी र्ी वस्िु की शुष्ट्क नपसाई, ग्लेनज़ंग और पॉनलनशंग;

(ग) वे सर्ी प्रनियाएँ नजनमें हाइड्रो्लोररक अम्ल के धुएँ या अमोननया वाष्ट्प ननकलिे हैं;

(घ) र्ट्ठी के साँचे या "बियन" बनाने की सर्ी प्रनियाएँ नजनमें प्रयुि "बियनों" को पीसना या कुचलना शानमल है; और

(ङ) शुष्ट्क सीसा यौनगक के उपयोग वाली सर्ी प्रनियाएँ।

(2) धूल के ननष्ट्कर्यर् या िमन के नलए सर्ी उपकरर्ों की हर छह महीने में कम से कम एक बार नकसी सक्षम व्यनि द्वारा जाँच और परीक्षर् नकया जाएगा, और ऐसी

जाँच और परीक्षर् द्वारा प्रकट नकए गए नकसी र्ी िोर् को यिाशीघ्र ठीक नकया जाएगा।

(3) ऐसी परीक्षा और परीक्षर् का नववरर् युि एक रनजस्टर फॉमय संख्या 26 में रखा जाएगा।

4. र्िगिती मभहिाओं और भकशोरों से संबंभधत भनषेध - नकसी र्ी गर्यविी मनहला या नकशोर को अनुच्छेि 2 में नननियष्ट नकसी र्ी कायय में या ऐसे नकसी र्ी स्िान

पर ननयोनजि या कायय करने की अनुमनि नहीं िी जाएगी जहाँ ऐसे कायय नकए जािे हैं।

5. फशग और कायग-बेंच - प्रत्येक कमरे का फशय और कायय-बेंच, नजसमें सीसे के सूखे यौनगक का उपयोग नकया जािा है या नजसमें नसनलका धूल छोडने वाली कोई

प्रनिया की जािी है, नम रखा जाएगा और ननम्ननलनखि आवश्यकिाओं का पालन नकया जाएगा:-

[PART IV

DELHI GAZETTE : EXTRAORDINARY

45

(क) फशय -

(i) सीमेंट या इसी िरह की सामग्री का होगा िानक वह नचकना और पानी के नलए अर्ेद्य हो;

(ii) अच्छी नस्िनि में रखा जाएगा; और

(iii) उस समय पानी से अच्छी िरह नछडकने के बाि प्रनिनिन साफ नकया जाएगा जब कमरे में कोई अन्य कायय नहीं नकया जा रहा हो; और

(ख) कायय-बेंचों की -

(i) सिह नचकनी होगी और उन्हें अच्छी नस्िनि में रखा जाएगा, और

(ii) उन्हें प्रनिनिन या िो पूरी िरह से गीला करके या सक्ट्शन सफाई उपकरर् द्वारा उस समय साफ नकया जाएगा जब उन पर कोई अन्य कायय नहीं नकया जा रहा हो।

6. हाइड्रोफ्िोररक अम्ि का उपयोर् - ननम्ननलनखि प्रावधान उन कमरों पर लागू होंगे नजनमें काँच को हाइड्रो्लोररक अम्ल से उपचाररि नकया जािा है:-

(क) कमरे के सर्ी र्ागों में कुशल वायु-संचार सुनननिि और बनाए रखने के नलए पयायप्त आकार के प्रवेश और ननकास द्वार होंगे;

(ख) फशय गट्टा-पचाय से ढका होगा और मज़बूि होगा और एक ढकी हुई नाली िक ढलान वाला होगा;

(ग) काययस्िलों को उर्रे हुए हुडों से इस प्रकार घेरा जाएगा नक उपचाररि की जाने वाली वस्िुओं को लाने के नलए आवश्यक नछद्र यिासंर्व छोटे हों; और

(घ) कुशल एग्जॉस्ट ड्रै्ट इस प्रकार बनाया जाएगा नक गैसें नीचे की ओर ननकल जाएँ।

7. हाइड्रोफ्िोररक अम्ि का िंडारण और पररिहन - हाइड्रो्लोररक अम्ल का र्ंडारर् या पररवहन सीसे या रबर से बने नसलेंडरों या पात्र के अलावा नकसी अन्य

माध्यम से नहीं नकया जाएगा।

8. ब्िो पाइप - प्रत्येक ग्लास ब्लोअर को एक अलग ब्लो पाइप प्रिान नकया जाएगा नजस पर उस व्यनि का नवनशष्ट नचि अंनकि होगा नजसे यह जारी नकया गया है

और प्रत्येक ग्लास ब्लोअर को अपने ब्लो पाइप को रोगार्ुरनहि करने के नलए उपयुि सुनवधाएँ आसानी से उपलब्ध होंगी।

9. कायग किों में िोजन, पेय आभि भनभषद्ध - नकसी र्ी कमरे या काययस्िल में, जहाँ अनुच्छेि 2 में नननियष्ट कोई र्ी प्रनिया की जािी है, कोई र्ी कमयचारी र्ोजन,

पेय, पान और सुपारी या िंबाकू नहीं लाएगा या उसका सेवन नहीं करेगा।

10. सुरिात्मक िस्त्र - अनधर्ोगी अनुच्छेि 2 में नननियष्ट प्रनियाओं में काययरि सर्ी व्यनियों के उपयोग के नलए उपयुि सुरक्षात्मक वस्त्र, जूिे और चश्मे उपलब्ध

कराएगा, अच्छी मरम्मि करेगा और

स्वच्छ नस्िनि में रखेगा।

कायय की प्रकृनि के अनुसार और ऐसे वस्त्र, जूिे आनि संबंनधि व्यनियों द्वारा पहने जाने चानहए।

11. धुिाई सुभिधाएँ -

(1) अनुच्छेि 2 में नननियष्ट प्रनियाओं में काययरि सर्ी व्यनियों के उपयोग के नलए स्वच्छ और अच्छी नस्िनि में उपलब्ध और अनुरनक्षि नकया जाएगा

(2) एक धुलाई स्िान नजसमें या िो -

(i) एक नचकनी, अर्ेद्य सिह वाला एक कुंड हो नजसमें नबना प्लग के, एक अपनशष्ट पाइप लगा हो,

और नजसकी लंबाई इिनी हो नक नकसी र्ी समय काययरि प्रत्येक पाँच ऐसे व्यनियों के नलए कम से कम 60 सेंटीमीटर जगह हो और नजसमें कुंड के ऊपर नल या जेट से

60 सेंटीमीटर से अनधक के अंिराल पर पानी की ननरंिर आपूनिय हो; या

(3) नकसी र्ी समय काययरि प्रत्येक पाँच ऐसे व्यनियों के नलए कम से कम एक वॉश बेनसन हो,

नजसमें अपनशष्ट पाइप और प्लग लगा हो और नजसमें पयायप्त पानी की आपूनिय हो या हमेशा आसानी से उपलब्ध हो;

(4) उपयुि सामग्री से बने साफ िौनलये की पयायप्त आपूनिय हो, नजन्हें प्रनिनिन नवीनीकृि नकया जािा हो साि ही साबुन या अन्य उपयुि सफाई सामग्री और नेल ब्रश की

पयायप्त आपूनिय हो;

और

(5) नलों सनहि पयायप्त संख्या में स्टैंड पाइप, नजनकी संख्या और स्िान मुख्य ननरीक्षक-सह-सुनवधा प्रिािा की संिुनष्ट के अनुसार होंगे।

46

DELHI GAZETTE : EXTRAORDINARY

PART IV]

12. भचभकत्सा अभधकारी द्वारा भचभकत्सा परीिण –

(1) अनुच्छेि 2 में नननियष्ट प्रनियाओं में ननयोनजि प्रत्येक श्रनमक की नचनकत्सा अनधकारी द्वारा उसके प्रिम ननयोजन के 15 निनों के र्ीिर जाँच की जाएगी। इस परीक्षर्

में फु्फुसीय कायय परीक्षर् और संनिग्ध मामलों में छािी का एक्ट्स-रे, साि ही सीसा और मूत्र परीक्षर् शानमल होंगे। नकसी र्ी श्रनमक को कारखाने में प्रिम ननयोजन के

15 निनों के बाि िब िक काम करने की अनुमनि नहीं िी जाएगी जब िक नक नचनकत्सा अनधकारी द्वारा ऐसे ननयोजन के नलए प्रमानर्ि न कर निया जाए।

(2) उि प्रनियाओं में ननयोनजि प्रत्येक श्रनमक की नचनकत्सा अनधकारी द्वारा प्रत्येक बारह कैलेंडर महीनों में कम से कम एक बार पुनिः जाँच की जाएगी। ऐसी पुनिः जाँच

में, जहाँ र्ी नचनकत्सा अनधकारी उनचि समझे, उप-अनुच्छेि (1) में नननियष्ट परीक्षर् शानमल होंगे।

(3) नचनकत्सा अनधकारी नकसी श्रनमक की जाँच करने के बाि, प्रपत्र-24 में स्वास््य प्रमार् पत्र जारी करेगा। की गई जाँच और पुनिः जाँच का ररकॉडय प्रमार् पत्र में िजय

नकया जाएगा और प्रमार् पत्र कारखाने के अनधर्ोगी की अनर्रक्षा में रखा जाएगा। उप-अनुच्छेि (1) और (2) के अंिगयि की गई प्रत्येक परीक्षा का ररकॉडय, नजसमें

परीक्षर्ों की प्रकृनि और पररर्ाम शानमल हों, नचनकत्सा अनधकारी द्वारा प्रपत्र-25 में एक स्वास््य रनजस्टर में र्ी िजय नकया जाएगा।

(4) स्वास््य प्रमार्पत्र और स्वास््य रनजस्टर को ननरीक्षक-सह-सुनवधाप्रिािा द्वारा ननरीक्षर् के नलए आसानी से उपलब्ध रखा जाएगा।

(5) यनि नकसी र्ी समय नचनकत्सा अनधकारी की राय में कोई कमयचारी उि प्रनियाओं में रोजगार के नलए इस आधार पर उपयुि नहीं है नक उसमें बने रहने से कमयचारी

के स्वास््य को नवशेर् खिरा होगा, िो वह अपने ननष्ट्कर्ों को उि प्रमार्पत्र और स्वास््य रनजस्टर में िजय करेगा। उि िस्िावेजों में उसके ननष्ट्कर्ों की प्रनवनष्ट में वह अवनध

र्ी शानमल होनी चानहए नजसके नलए वह यह मानिा है नक उि व्यनि उि प्रनियाओं में काम करने के नलए अयोग्य है। प्रनिया से इस प्रकार ननलंनबि व्यनि को वैकनल्पक

स्िान सुनवधाएँ प्रिान की जाएँगी, जब िक नक वह नचनकत्सा अनधकारी की राय में पूरी िरह से अक्षम न हो, नजसमें प्रर्ानवि व्यनि के उनचि पुनवायस की अनुशंसा

शानमल होगी।

(6) कोई र्ी व्यनि जो उप-अनुच्छेि (5) में उनल्लनखि अनुसार कायय करने के नलए अयोग्य पाया गया हो, उसे उि प्रनियाओं में पुनिः ननयोनजि नहीं नकया जाएगा या

कायय करने की अनुमनि नहीं िी जाएगी, जब िक नक नचनकत्सा अनधकारी, आगे की जांच के बाि, उसे पुनिः उन प्रनियाओं में ननयोजन के नलए योग्य प्रमानर्ि न कर िे।

..........

अनुसूची-V

धातुओं की भपसाई या ग्िेभ ंर् और उससे संबंभधत प्रभियाएँ

1. पररिाषाएँ - इस अनुसूची के प्रयोजनों के नलए –

(क) "ग्राइंडस्टोन" का अिय प्राकृनिक या नननमयि बलुआ पत्िर से बना ग्राइंडस्टोन है, नकन्िु इसमें धािु का पनहया या बेलन शानमल नहीं है नजसमें प्राकृनिक या

नननमयि बलुआ पत्िर के ब्लॉक लगे हों;

(ख) "अपघर्यक पनहया" का अिय है बंधी हुई एमरी या समान अपघर्यक से नननमयि पनहया;

(ग) "ग्राइंनडंग" का अिय है यांनत्रक शनि की सहायिा से धािु का ग्राइंडस्टोन या अपघर्यक पनहये द्वारा अपघर्यर्;

(घ) "ग्लेनज़ंग" का अिय है यांनत्रक शनि की सहायिा से धािु का नकसी पनहये, बफ, मॉप या समान उपकरर् द्वारा अपघर्यर्, पॉनलश या पररष्ट्करर्, नजस पर कोई

अपघर्यक या पॉनलनशंग पिािय लगाया या प्रयुक्ट्‍ि गया हो;

(ङ) "रेनसंग" का अिय है घूमिे हुए ग्राइंडस्टोन को पहली बार उपयोग में लाने से पहले उसे मोडना, काटना या िैयार करना;

(च) "हैनकंग" का अिय है नकसी हैक या समान उपकरर् द्वारा ग्राइंडस्टोन की सिह को छीलना; और

(छ) "रॉनडंग" का अिय है नकसी घूमिे हुए ग्राइंडस्टोन की सिह पर धािु की छड, छड या पट्टी लगाकर उसकी ड्रेनसंग करना।

अपिाि - (1) इस अनुसूची में कुछ र्ी ऐसे कारखाने पर लागू नहीं होगा नजसमें केवल मरम्मि का कायय नकया जािा है, नसवाय उसके नकसी ऐसे र्ाग के नजसमें एक

या एक से अनधक व्यनि पूरी िरह या मुख्य रूप से धािुओं को पीसने या चमकाने में काययरि हों।

(2) इस अनुसूची में पैराग्राफ 4 को छोडकर कुछ र्ी धािुओं को पीसने या चमकाने के ऐसे कायय पर लागू नहीं होगा जो रुक-रुक कर नकया जािा हो और नजसमें कोई

र्ी व्यनि नकसी र्ी सप्ताह में 12 घंटे से अनधक समय िक काययरि न हो।

2. धूि हटाने के उपकरण - कोई र्ी रेनसंग, ड्राई ग्राइंनडंग या ग्लेनज़ंग नबना -

(क) एक हुड या अन्य उपकरर् जो इस प्रकार नननमयि, व्यवनस्िि, रखा और अनुरनक्षि हो नक उडने वाली धूल को रोकने के नलए पयायप्त हो;

[PART IV

DELHI GAZETTE : EXTRAORDINARY

47

(ख) पयायप्त मात्रा में आकार में, वायुरोधी और इस प्रकार व्यवनस्िि नक धूल को िूर ले जा सके, डक्ट्ट को अवरोधों से मुि रखा जाएगा और ननरीक्षर् एवं सफाई के नलए

उनचि पहुँच के साधन उपलब्ध कराए जाएंगे, और जहाँ व्यावहाररक हो, वहाँ पंखे से िूर एक कनेक्ट्शन लगाया जाएगा िानक ननरीक्षक-सह-सुनवधाकिाय उि डक्ट्ट में वायु

िाब का पिा लगाने के नलए आवश्यक कोई र्ी उपकरर् लगा सके; और

(ग) धूल को ननकालने के नलए पयायप्त हवा उत्पन्न करने वाला पंखा या अन्य कुशल साधन: बशिे नक मुख्य ननरीक्षक-सह-सुनवधाप्रिािा नकसी अन्य उपकरर् को स्वीकार

कर सकिा है जो उसकी राय में, धूल को रोकने, हटाने और ननपटाने के नलए हुड, डक्ट्ट और पंखे की िरह ही प्रर्ावी हो।

3. पीसने की भियाओं में भनयोजन पर प्रभतबंध - एक से अनधक व्यनि नकसी र्ी समय पीसने वाले पत्िर, अपघर्यक पनहये या ग्लेनज़ंग उपकरर् पर पीसने या ग्लेनज़ंग

की वास्िनवक प्रनिया नहीं करेंगे:

परन्‍िु, यह अनुच्छेि नकसी र्ी ऐसे पीसने वाले पत्िर, अपघर्यक पनहये या ग्लेनज़ंग उपकरर् पर र्ारी या र्ारी वस्िुओं के संचालन में सहायिा करने वाले व्यनियों के

ननयोजन को प्रनिबंनधि नहीं करेगा।

4. ग्िेभ ंर् - ग्लेनज़ंग या अन्य प्रनियाएँ, गीले पीसने से संबंनधि प्रनियाओं को छोडकर, पीसने वाले पत्िर पर नकसी र्ी कमरे में नहीं की जाएँगी जहाँ गीले पीसने का

काम नकया जािा है।

5. हैभकंर् और रॉभडंर् - हैनकंग या रॉनडंग िब िक नहीं की जाएगी जब िक नक प्रनिया के िौरान, ग्राइंडस्टोन की ऊपरी सिह पर पयायप्त पानी की आपूनिय न की जाए या

अनुच्छेि 3 की आवश्यकिाओं के अनुसार धूल को रोकने के नलए पयायप्त उपकरर् उपलब्ध न कराए जाएं।

6. धूि उपकरणों की जाँच - (1) धूल ननकालने या िबाने के सर्ी उपकरर्ों की हर छह महीने में कम से कम एक बार सक्षम व्यनि द्वारा जाँच और परीक्षर् नकया

जाएगा, और ऐसी जाँच और परीक्षर् द्वारा प्रकट नकसी र्ी िोर् को यिाशीघ्र ठीक नकया जाएगा।

(2) ऐसी जाँच और परीक्षर् के नववरर् वाला एक रनजस्टर प्रपत्र संख्या 26 में रखा जाएगा।

7. भचभकत्सा अभधकारी द्वारा भचभकत्सा जाँच -

(1) धािु की पीसने या ग्लेनज़ंग और उससे संबंनधि प्रनियाओं में काययरि प्रत्येक कमयचारी की, उसके पहले रोजगार के 15 निनों के र्ीिर एक नचनकत्सा अनधकारी द्वारा

जाँच की जाएगी। ऐसी जाँच में फु्फुसीय कायय परीक्षर् और संनिग्ध मामलों में छािी का एक्ट्स-रे शानमल होगा। नकसी र्ी कमयचारी को कारखाने में उसके पहले रोजगार

के 15 निनों के बाि िब िक काम करने की अनुमनि नहीं िी जाएगी जब िक नक उसे नचनकत्सा अनधकारी द्वारा ऐसे रोजगार के नलए उपयुि प्रमानर्ि न कर निया जाए।

(2) उि प्रनियाओं में ननयोनजि प्रत्येक कमयचारी की प्रत्येक 12 कैलेंडर महीनों में कम से कम एक बार नचनकत्सा अनधकारी द्वारा पुनिः जांच की जाएगी। ऐसी पुनिः जांच

में, जहाँ र्ी नचनकत्सा अनधकारी उनचि समझे, उप-अनुच्छेि (1) में नननियष्ट परीक्षर् शानमल होंगे।

(3) नचनकत्सा अनधकारी, कमयचारी की जांच करने के बाि, प्रपत्र-24 में स्वास््य प्रमार् पत्र जारी करेगा। इस िरह की गई जांच और पुनिः जांच का ररकॉडय प्रमार्पत्र में

िजय नकया जाएगा और प्रमार्पत्र कारखाने के अनधर्ोगी की अनर्रक्षा में रखा जाएगा। उप-अनुच्छेि (1) और (2) के अंिगयि की गई प्रत्येक जांच का ररकॉडय, नजसमें

परीक्षर्ों की प्रकृनि और पररर्ाम शानमल हैं, नचनकत्सा अनधकारी द्वारा प्रपत्र-25 में स्वास््य रनजस्टर में र्ी िजय नकया जाएगा।

(4) स्वास््य प्रमार्पत्र और स्वास््य रनजस्टर ननरीक्षक-सह-सुनवधाप्रिािा द्वारा ननरीक्षर् के नलए आसानी से उपलब्ध रखे जाएँगे।

(5) यनि नकसी र्ी समय नचनकत्सा अनधकारी की राय में कोई कमयचारी उि प्रनियाओं में रोजगार के नलए उपयुि नहीं है और यह पाया जािा है नक इसमें बने रहने से

कमयचारी के स्वास््य को नवशेर् खिरा होगा, िो वह अपने ननष्ट्कर्ों को उि प्रमार्पत्र और स्वास््य रनजस्टर में िजय करेगा। इन िस्िावेज में उसके ननष्ट्कर्ों की प्रनवनष्ट में

वह अवनध र्ी शानमल होनी चानहए नजसके नलए वह समझिा है नक उि व्यनि उि प्रनियाओं में काम करने के नलए अयोग्य है। प्रनिया से इस प्रकार ननलंनबि व्यनि

48

DELHI GAZETTE : EXTRAORDINARY

PART IV]

को वैकनल्पक स्िान-स्िापन सुनवधाएँ प्रिान की जाएँगी, जब िक नक वह नचनकत्सा अनधकारी की राय में पूरी िरह से अक्षम न हो, ऐसी नस्िनि में प्रर्ानवि व्यनि का

उनचि पुनवायस नकया जाएगा।

(6) कोई र्ी व्यनि जो उप-अनुच्छेि (5) में उनल्लनखि अनुसार कायय करने के नलए अयोग्य पाया गया है, उसे उि प्रनियाओं में िब िक पुनिः ननयोनजि या कायय करने

की अनुमनि नहीं िी जाएगी जब िक नक नचनकत्सा अनधकारी, आगे की जांच के बाि, उसे पुनिः उन प्रनियाओं में ननयोजन के नलए योग्य प्रमानर्ि न कर िे।

10. छूट - मुख्य ननरीक्षक-सह-सुनवधाप्रिािा नलनखि प्रमार् पत्र द्वारा, ऐसी शिों के अधीन, जो वह उसमें नननियष्ट करे, नकसी कारखाने के संबंध में इस अनुसूची के नकसी

र्ी प्रावधान को नशनिल या ननलंनबि कर सकिा है, यनि कायय की नवशेर् नवनधयों के कारर् या अन्यिा ऐसा नशनिल या ननलंबन ननयोनजि व्यनियों के स्वास््य या सुरक्षा

के नलए खिरे के नबना साध्य हो।

....................

अनुसूची-VI

सीसा और सीसे के कुछ यौभर्कों का भिभनमागण और उपचार

1. छूट - जहाँ मुख्य ननरीक्षक-सह-सुनवधाप्रिािा इस बाि से संिुष्ट है नक इस अनुसूची के सर्ी या कोई र्ी प्रावधान ननयोनजि व्यनियों की सुरक्षा के नलए आवश्यक

नहीं हैं, वहाँ वह नलनखि प्रमार् पत्र द्वारा नकसी र्ी कारखाने को ऐसे सर्ी या नकसी र्ी प्रावधान से छूट िे सकिा है, बशिे नक वह ऐसी शिों को नननियष्ट करे।

2. पररिाषाएँ - इस अनुसूची के प्रयोजन के नलए -

(क) "सीसा यौनगक" से गैलेना के अलावा सीसे का कोई र्ी यौनगक अनर्प्रेि है, जो नीचे वनर्यि नवनध से उपचाररि करने पर हाइड्रोक्ट्लोररक अम्ल के जलीय नवलयन

में घुलनशील सीसा यौनगक की एक मात्रा उत्पन्न करिा है, जो सीसा मोनोऑक्ट्साइड के रूप में पररकनलि करने पर नवश्लेर्र् हेिु नलए गए र्ाग के "शुष्ट्क र्ार" के पाँच

प्रनिशि से अनधक होिी है। पेंट और इसी प्रकार के उत्पािों और िेल या वसा युि अन्य नमश्रर्ों के मामले में, "शुष्ट्क र्ार" से अनर्प्रेि है उस पिािय का शुष्ट्क र्ार जो

पिािय को अच्छी िरह नमलाने और िेल, वसा, वाननयश या अन्य माध्यमों को हटाने के नलए उपयुि नवलायकों से उपचाररि करने के बाि शेर् रह जािा है।

उपचार की नवनध इस प्रकार होगी:-

100 नडग्री सेंटीग्रेड पर सुखाई गई और अच्छी िरह नमनश्रि सामग्री की एक िौली गई मात्रा को सामान्य िापमान पर एक घंटे िक लगािार नहलाया जाएगा, अपने र्ार

के 1,000 गुना हाइड्रोक्ट्लोररक अम्ल के जलीय घोल के साि, नजसमें र्ार के अनुसार 0.25 प्रनिशि हाइड्रोजन क्ट्लोराइड हो। इसके बाि इस घोल को एक घंटे के नलए

रखा जाएगा और नफर छान नलया जाएगा। इस स्पष्ट नफल्‍टर में मौजूि लेड लवर्, लेड सल्फेट के रूप में अवक्षेनपि हो जाएगा और लेड सल्फेट के रूप में िोला जाएगा;

(ख) "कुशल एग्जॉस्ट ड्रै्ट " का अिय है स्िानीयकृि वेंनटलेशन जो गैस, वाष्ट्प, धूल या धुएं को हटाने के नलए यांनत्रक साधनों द्वारा नकया जािा है िानक उन्हें (जहाँ िक

संर्व हो, आमिौर पर प्रचनलि वायुमंडलीय पररनस्िनियों में) नकसी र्ी ऐसे स्िान की हवा में फैलने से रोका जा सके जहाँ कायय नकया जािा है। कोई र्ी ड्रा्ट कुशल

नहीं माना जाएगा जो उस नबंिु पर उत्पन्न धुएं को हटाने में नवफल रहिा है जहाँ से ऐसी गैस, वाष्ट्प, धुआं या धूल उत्पन्न होिी है।

3. अनुप्रयोर् - यह अनुसूची उन सर्ी कारखानों या कारखानों के र्ागों पर लागू होगी नजनमें ननम्ननलनखि में से कोई र्ी कायय नकया जािा है:-

(क) ऐसी र्ट्टी पर कायय जहाँ जस्िा या सीसा अयस्क का अपचयन या उपचार नकया जािा है;

(ख) सीसा युि राख का संचालन, उपचार या अपचयन, सीसे का डीई नसल्वररंग या स्िैप सीसा या जस्िा का नपघलना;

(ग) िस प्रनिशि से अनधक सीसा युि सोल्डर या नमश्रधािुओं का ननमायर्;

(घ) सीसे के नकसी र्ी ऑक्ट्साइड, काबोनेट, सल्फेट, िोमेट, एसीटेट, नाइरेट या नसनलकेट का ननमायर्;

(ङ) सीसा टेरा-एनिल का संचालन या नमश्रर्;

(च) सीसा यौनगक के उपयोग से संबंनधि कोई अन्य कायय; और

(छ) ऐसे काययकक्षों की सफाई जहाँ पूवोि कोई र्ी कायय नकया जािा है।

4. र्िगिती मभहिाओं और भकशोरों से संबंभधत भनषेध - नकसी र्ी गर्यविी मनहला या नकशोर को अनुच्छेि 3 में नननियष्ट नकसी र्ी कायय में ननयोनजि या काम करने

की अनुमनि नहीं िी जाएगी।

5. अनुपािन संबंधी अपेिाएं - नकसी र्ी व्यनि को सीसा यौनगकों के उपयोग से संबंनधि नकसी र्ी ऐसी प्रनिया में ननयोनजि या काम करने की अनुमनि नहीं िी

जाएगी, नजसमें प्रनिया के िौरान सीसा यौनगक से धूल या धुआँ उत्पन्न होिा है, या उसमें ननयोनजि व्यनि पर उसके रोजगार के िौरान नकसी र्ी सीसा यौनगक के छींटे

[PART IV

DELHI GAZETTE : EXTRAORDINARY

49

पडने की आशंका हैं, जब िक नक अनुच्छेि 5 से 13 के प्रावधानों का अनुपालन नहीं नकया जािा है।

6. एग्जॉस्ट ड्रैफ्ट - (1) जहाँ प्रनिया में धूल, धुआँ, गैस या वाष्ट्प उत्पन्न होिा है, वहाँ उन्हें एक कुशल एग्जॉस्ट ड्रै्ट के माध्यम से हटाने का प्रावधान नकया जाएगा

जो धूल, धुआँ, गैस या वाष्ट्प पर यिासंर्व उत्पनत्त के नबंिु के करीब काम करने के नलए नडज़ाइन नकया गया हो।

(2) धूल के ननष्ट्कर्यर् या िमन के नलए सर्ी उपकरर्ों की कम से कम एक बार प्रत्येक छह माह में सक्षम व्यनि द्वारा जाँच और परीक्षर् नकया जाएगा, और ऐसी जाँच

और परीक्षर् द्वारा प्रकट नकसी र्ी िोर् को यिाशीघ्र ठीक नकया जाएगा।

(3) ऐसी जाँच और परीक्षर् के नववरर् वाला एक रनजस्टर प्रपत्र संख्या 26 में रखा जाएगा।

7. भचभकत्सा अभधकारी द्वारा भचभकत्सा परीिण-

(1) अनुच्छेि 3 में नननियष्ट कायों में ननयोनजि प्रत्येक कमयचारी की, उसके प्रिम ननयोजन के 15 निनों के र्ीिर एक नचनकत्सा अनधकारी द्वारा जाँच की जाएगी। इस

परीक्षर् में रि और मूत्र में सीसा, मूत्र में एएलए, हीमोग्लोनबन की मात्रा, कोनशकाओं की नस्टपनलंग और नस्िरिा परीक्षर् के नलए फु्फुसीय कायय परीक्षर् शानमल होंगे।

नकसी र्ी कमयचारी को कारखाने में उसके प्रिम ननयोजन के 15 निनों के बाि िब िक काम करने की अनुमनि नहीं िी जाएगी जब िक नक नचनकत्सा अनधकारी द्वारा उसे

ऐसे ननयोजन के नलए उपयुि प्रमानर्ि न कर निया जाए।

(2) उि प्रनियाओं में ननयोनजि प्रत्येक कमयचारी की, प्रत्येक 3 कैलेंडर महीनों में कम से कम एक बार, एक नचनकत्सा अनधकारी द्वारा पुनिः जाँच की जाएगी। ऐसी पुनिः

जाँच में, जहाँ र्ी नचनकत्सा अनधकारी उनचि समझे, उप-अनुच्छेि (1) में नननियष्ट परीक्षर् शानमल होंगे।

(3) नचनकत्सा अनधकारी, कमयचारी की जाँच करने के बाि, प्रपत्र-24 में योग्यिा प्रमार् पत्र जारी करेगा। नकए गए परीक्षर् और पुन: परीक्षर्ों का ररकॉडय प्रमार्पत्र में

िजय नकया जाएगा और प्रमार्पत्र कारखाने के अनधर्ोगी की अनर्रक्षा में रखा जाएगा। उप-अनुच्छेि (1) और (2) के अंिगयि नकए गए प्रत्येक परीक्षर् का ररकॉडय,

नजसमें परीक्षर्ों की प्रकृनि और पररर्ाम शानमल हैं, नचनकत्सा अनधकारी द्वारा प्रपत्र-25 में एक स्वास््य रनजस्टर में र्ी िजय नकया जाएगा।

(4) स्वास््य प्रमार्पत्र और स्वास््य रनजस्टर ननरीक्षक-सह-सुनवधाप्रिािा द्वारा ननरीक्षर् के नलए आसानी से उपलब्ध रखा जाएगा।

(5) यनि नकसी र्ी समय नचनकत्सा अनधकारी की राय में कोई कमयचारी उि प्रनियाओं में रोजगार के नलए इस आधार पर अब उपयुि नहीं है नक उसमें बने रहने से

कमयचारी के स्वास््य को नवशेर् खिरा होगा, िो वह अपने ननष्ट्कर्ों को उि प्रमार्पत्र और स्वास््य रनजस्टर में िजय करेगा। उन िस्िावेजों में उसके ननष्ट्कर्ों की प्रनवनष्ट में

वह अवनध र्ी शानमल होनी चानहए नजसके नलए वह समझिा है नक उि व्यनि उि प्रनियाओं में काम करने के नलए अयोग्य है। प्रनिया से इस प्रकार ननलंनबि व्यनि

को वैकनल्पक स्िान-स्िापन सुनवधाएँ प्रिान की जाएँगी, जब िक नक वह नचनकत्सा अनधकारी की राय में पूरी िरह से अक्षम न हो। ऐसी नस्िनि में प्रर्ानवि व्यनि का

उनचि पुनवायस नकया जाएगा।

(6) उप-अनुच्छेि (5) में उनल्लनखि कायय करने के नलए अयोग्य पाए गए नकसी र्ी व्यनि को उि प्रनियाओं में िब िक पुनिः ननयोनजि या कायय करने की अनुमनि नहीं

िी जाएगी, जब िक नक नचनकत्सा अनधकारी, आगे की जाँच के बाि, उसे पुनिः उन प्रनियाओं में ननयोजन के नलए उपयुि प्रमानर्ि न कर िे।

8. कायग-कि में िोजन, पेय आभि भनभषद्ध - नकसी र्ी कायय-कक्ष में, जहाँ प्रनिया चल रही हो, नकसी र्ी काययकिाय द्वारा र्ोजन, पेय, पान, सुपारी या िंबाकू नहीं

लाया जाएगा या उसका सेवन नहीं नकया जाएगा और कोई र्ी व्यनि र्ोजन या आराम के अंिराल के िौरान ऐसे नकसी र्ी कमरे में नहीं रहेगा।

9. सुरिात्मक िस्त्र - उपयुि सुरक्षात्मक ओवरऑल और नसर ढकने के नलए वस्‍त्र उपर्ोगकिाय को प्रिान नकया जाएगा, उसका रखरखाव नकया जाएगा और उसे साफ

रखा जाएगा और ऐसा ओवरऑल और नसर ढकने का वस्‍त्र ननयोनजि व्यनियों को पहनना होगा।

10. कायग किों, औजारों आभि की सफाई - नजन कमरों में व्यनि काययरि हैं और उनके द्वारा उपयोग नकए जाने वाले सर्ी औजारों और उपकरर्ों को साफ-सुिरा

रखा जाएगा।

11. धुिाई की सुभिधाएँ –

(1) अनधर्ोगी सर्ी ननयोनजि व्यनियों के उपयोग के नलए उपयुि धुलाई सुनवधाएँ प्रिान करेगा और उनका रखरखाव करेगा, नजनमें ननम्‍नांनकि शानमल हैं –

(क) एक नचकनी, अर्ेद्य सिह वाला एक कुंड नजसमें नबना प्लग के, एक अपनशष्ट पाइप लगा हो, और नजसकी लंबाई इिनी हो नक नकसी र्ी समय काययरि प्रत्येक

पाँच व्यनियों के नलए कम से कम िो फुट की जगह हो, और कुंड के ऊपर नलों या जेट से 60 सेंटीमीटर से अनधक अंिराल पर पानी की ननरंिर आपूनिय हो; या

50

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(ख) नकसी र्ी समय काययरि प्रत्येक िस व्यनियों के नलए कम से कम एक वॉशबेनसन, नजसमें अपनशष्ट पाइप और प्लग लगा हो और नजसमें स्वच्छ पानी की ननरंिर

आपूनिय हो; साि ही, िोनों ही नस्िनियों में, नेल ब्रश, साबुन या अन्य उपयुि सफाई सामग्री और साफ िौनलये की पयायप्त आपूनिय हो।

(2) इस प्रकार प्रिान की गई सुनवधाएँ एक नजम्मेिार व्यनि के प्रर्ार में होंगी और उन्हें साफ-सुिरा रखा जाएगा।

12. िोजन कि या कैंटीन - अनधर्ोगी को ननयोनजि व्यनियों के उपयोग के नलए उनके र्ोजन के नलए उपयुि और पयायप्त व्यवस्िा उपलब्ध करानी होगी। व्यवस्िा

में नकसी र्ी कायय कक्ष से अलग एक कमरा शानमल होगा नजसमें पयायप्त मेजें और बेंच होंगी, और जब िक गमय र्ोजन परोसने वाली कैंटीन उपलब्ध न हो, र्ोजन को गमय

करने के पयायप्त साधन उपलब्ध होंगे। कमरे में िाज़ी हवा का संचार पयायप्त रूप से होना चानहए, इसे एक नजम्मेिार व्यनि के प्रर्ार में रखा जाना चानहए और इसे साफ-

सुिरा रखा जाना चानहए।

13. क्िोकरूम - अनधर्ोगी को ननयोनजि व्यनियों के उपयोग के नलए, काम के घंटों के िौरान न पहने जाने वाले कपडों के नलए और गीले कपडों को सुखाने के नलए

उपयुि स्िान उपलब्ध कराना होगा और उसका रखरखाव करना होगा।

-----------------------------

अनुसूची-VII

खतरनाक पेरोभियम से पेरोि र्ैस उत्पािन

1. र्िगिती मभहिाओं और भकशोरों से संबंभधत भनषेध - नकसी र्ी गर्यविी मनहला या नकशोर को ऐसी नकसी र्ी इमारि में ननयोनजि या काम करने की अनुमनि नहीं

िी जाएगी या प्रवेश करने की अनुमनि नहीं िी जाएगी नजसमें खिरनाक पेरोनलयम से गैस का उत्पािन नकया जािा है।

2. फ्िेम रैप्‍स - खिरनाक पेरोनलयम से गैस उत्पािन संयंत्र और संबंनधि पाइनपंग और नफनटंग में कम से कम िो कुशल ्लेम रैप्‍स (ज्वाला जाल) लगाए जाएँगे, नजन्हें

इस प्रकार नडज़ाइन और रखरखाव नकया जाएगा नक नकसी र्ी बनयर से संयंत्र में ्लैश बैक को रोका जा सके। इनमें से एक जाल को यिासंर्व संयंत्र के करीब लगाया

जाएगा। संयंत्र और सर्ी पाइप और वाल्व को ररसाव मुि स्िानपि और बनाए रखा जाएगा।

3. उत्पािन ििन या कि - इस अनुसूची में नननियष्ट प्रावधानों के लागू होने के बाि स्िानपि नकए गए, खिरनाक पेरोनलयम से गैस उत्पािन के सर्ी संयंत्र, कारखाना

र्वन के बाहर एक अलग, हवािार र्वन में स्िानपि नकए जाएँगे (नजसे आगे "उत्पािन र्वन" कहा जाएगा)। इस अनुसूची में नननियष्ट प्रावधानों के लागू होने से पहले

स्िानपि नकए गए ऐसे संयंत्रों के मामले में, उस कक्ष (नजसे आगे "उत्पािन कक्ष" कहा जाएगा) और कारखाना र्वन के शेर् र्ाग के बीच कोई सीधा संपकय नहीं होगा

जहाँ ऐसे संयंत्र स्िानपि नकए गए हैं (नजसे आगे "उत्पािन कक्ष" कहा जाएगा)। जहाँ िक संर्व हो, ऐसे सर्ी उत्पािन कक्ष अनग्नरोधी सामनग्रयों से नननमयि नकए जाएँगे।

4. अभग्नशामक यंत्र - खिरनाक पेरोनलयम से गैस उत्पािन के नलए संयंत्र के पास आसानी से सुलर् स्िान पर पेरोल की आग बुझाने का एक कुशल साधन रखा जाएगा।

5. संयंत्र मुख्य भनरीिक-सह-सुभिधाकताग द्वारा अनुमोभित भकया जाएर्ा - खिरनाक पेरोनलयम से गैस का ननमायर् गैस उत्पािन संयंत्र को छोडकर नकसी अन्य संयंत्र

में नहीं नकया जाएगा, नजसका नडज़ाइन और ननमायर् मुख्य ननरीक्षक-सह-सुनवधाप्रिािा द्वारा अनुमोनिि नकया गया हो।

6. खतरनाक पेरोभियम का ररसाि - खिरनाक पेरोनलयम को नकसी र्ी नाली या सीवर में जाने से रोकने के नलए प्रर्ावी किम उठाए जाएंगे।

7. धूम्रपान से संबंभधत भनषेध - कोई र्ी व्यनि उत्पािन कक्ष या र्वन या उसके आसपास धूम्रपान नहीं करेगा, न ही मानचस, आग, अनाच्‍छानिि ज्‍वाला या ्लेम

अिवा स्‍पाकय उत्पन्न करने के अन्य साधन ले जाएगा। कारखाने में अनधकांश श्रनमकों द्वारा समझी जाने वाली र्ार्ा में एक चेिावनी नोनटस लगाया जाएगा नजसमें धूम्रपान

और मानचस, आग, अनाच्‍छानिि ज्‍वाला या ्लेम अिवा स्‍पाकय उत्पन्न करने के अन्य साधन ले जाने पर प्रनिबंध लगाया जाएगा।

8. खतरनाक पेरोभियम या कंटेनर तक पह ँच - नकसी र्ी अननधकृि व्यनि की खिरनाक पेरोनलयम िक या ऐसे पात्र िक पहुँच नहीं होगी नजसमें कोई खिरनाक

पेरोनलयम र्रा हो।

9. भिद्युत भफभटंर् - सर्ी नवद्युि नफनटंग ज्वालारोधी ननमायर् की होंगी और सर्ी नवद्युि कंडक्ट्टर या िो धािु की ननलयों में बंि होंगे या सीसे के आवरर् वाले होंगे।

10. िरिाजों का भनमागण - उत्पािन कक्ष या र्वन के सर्ी िरवाजे बाहर की ओर खुलने या स्लाइड करने के नलए बनाए जाएंगे और कोई र्ी िरवाजा इस िरह से बंि

या अवरुि या जकडा हुआ नहीं होगा नक जब गैस का उत्पािन हो रहा हो और कोई र्ी व्यनि उत्पािन कक्ष या र्वन में काम कर रहा हो, िो उसे अंिर से आसानी से

और िुरंि नहीं खोला जा सके।

[PART IV

DELHI GAZETTE : EXTRAORDINARY

51

11. कंटेनरों की मरम्मत - नकसी र्ी ऐसे पात्र की मरम्मि उत्पािन कक्ष या र्वन में नहीं की जाएगी नजसमें खिरनाक पेरोनलयम हो और ऐसे नकसी र्ी पात्र की मरम्मि

िब िक नहीं की जाएगी जब िक नक उसमें जीनवि र्ाप न फूंकी गई हो और अंिर का र्ाग पूरी िरह से र्ाप से मुि न हो गया हो या यह सुनननिि करने के नलए अन्य

समान रूप से प्रर्ावी किम न उठाए गए हों नक वह खिरनाक पेरोनलयम या ज्वलनशील वाष्ट्प से मुि हो गया है।

………………………………..

अनुसूची-VIII

रेत, धातु के र्ोिे, या भग्रट, या अन्य अपर्षगक के जेट

द्वारा संपीभडत िायु या स्‍टीम ब्‍िॉभस्टंर् द्वारा िस्तुओं की सफाई या

उन्‍हें भचकना करना, खुरिुरा करना, आभि। (भिस्फोट भनयम)

1. पररिाषाएँ - इस अनुसूची के प्रयोजनों के भिए –

(क) "ब्लानस्टंग" का अिय है नकसी वस्िु की सिह के नकसी र्ी र्ाग को संपीनडि हवा या र्ाप के नवस्फोट द्वारा संचानलि रेि, धािु के गोले, या नग्रट या अन्य पिािय के

अपघर्यक का उपयोग करके साफ करना, नचकना करना, खुरिुरा बनाना या हटाना;

(ख) "ब्लानस्टंग एनक्ट्लोजर" का अिय है एक कक्ष, बैरल, कैनबनेट या कोई अन्य एनक्ट्लोजर जो उसमें ब्लानस्टंग करने के नलए नडज़ाइन नकया गया हो;

(ग) "ब्लानस्टंग चैंबर" का अिय है एक ब्लानस्टंग घेरा नजसमें कोई र्ी व्यनि नकसी र्ी कायय के संबंध में या अन्यिा नकसी र्ी समय प्रवेश कर सकिा है; और

(घ) "कानस्टंग की सफाई" जहाँ धािु की ढलाई के ननमायर् के संबंध में एक आकनस्मक या पूरक प्रनिया के रूप में की जािी है, उसका अिय है ढलाई को नचपकी हुई रेि

या अन्य पिािय से मुि करना और इसमें कोर को हटाना और ढलाई को सामान्य रूप से नचकना करना शानमल है, लेनकन इसमें मुि उपचार शानमल नहीं है।

2. रेत भिस्फोटन का भनषेध - रेि या मुि नसनलका युि नकसी अन्य पिािय को नकसी र्ी नवस्फोटन उपकरर् में अपघर्यक के रूप में नहीं डाला जाएगा और नवस्फोटन

के नलए इसका उपयोग नहीं नकया जाएगा:

परन्‍िु, यह उपबंनधि है नक यह खंड इस अनुसूची के लागू होने के िो वर्य बाि लागू होगा।

इसके अलावा, यह र्ी प्रावधान है नक नकसी र्ी गर्यविी मनहला या नकशोर को रेि नवस्फोटन के नकसी र्ी कायय में ननयोनजि या काम करने की अनुमनि नहीं िी जाएगी।

3. ब्िाभस्टंर् कायों के संबंध में सािधाभनयां - (1) ब्लानस्टंग नकसी ब्लानस्टंग घेरे के अलावा नकसी र्ी स्िान पर नहीं की जाएगी और ब्लानस्टंग और उससे संबंनधि

नकसी र्ी कायय ििा घेरे की सफाई और

मरम्मि के अलावा कोई र्ी कायय, नजसमें संयंत्र और उसमें नस्िि उपकरर् शानमल हैं, ब्लानस्टंग करिे समय बंि और वायुरोधी रखा जाएगा।

(2) ब्लानस्टंग बाडे का रखरखाव: ब्लानस्टंग बाडे को हमेशा अच्छी नस्िनि में रखा जाएगा और ऐसे बाडे से और उससे जुडे उपकरर्ों से धूल को नकसी र्ी कमरे की

हवा में फैलने से रोकने के नलए प्रर्ावी उपाय नकए जाएँगे।

(3) पृिक्ट्करर् उपकरर्ों का प्रावधान: प्रत्येक ब्लानस्टंग बाडे के नलए और उसके संबंध में, ब्लानस्टंग के नलए उपयोग नकए गए और अपघर्यक के रूप में पुनिः उपयोग

नकए जाने वाले अपघर्यक को, जहाँ िक संर्व हो, ब्लानस्टंग से उत्पन्न धूल या अन्य पिािों के कर्ों से पृिक करने के नलए कुशल उपकरर् उपलब्ध कराए जाएँगे और

उनका रखरखाव नकया जाएगा; और ऐसा कोई र्ी अपघर्यक नकसी र्ी ब्लानस्टंग उपकरर् में िब िक नहीं डाला जाएगा और न ही ब्लानस्टंग के नलए उपयोग नकया जाएगा

जब िक नक उसे इस प्रकार पृिक न कर नलया जाए:

परन्‍िु यह खंड, नवस्फोटन कक्षों के मामले को छोडकर, इस अनुसूची के लागू होने से पहले नननमयि या स्िानपि नवस्फोटन बाडों पर लागू नहीं होगा, यनि मुख्य ननरीक्षक-

सह-सुनवधा प्रिािा की राय है नक ऐसे पृिक्ट्करर् उपकरर् प्रिान करना उनचि रूप से व्यावहाररक नहीं है।

52

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(4) िेंभटिेशन संयंत्र का प्रािधान: प्रत्येक ब्लानस्टंग बाडे के संबंध में एक कुशल वेंनटलेशन संयंत्र की व्यवस्िा और रखरखाव नकया जाएगा जो यांनत्रक साधनों द्वारा

उत्सनजयि एग्जॉस्ट ड्रै्ट द्वारा बाडे में उत्पन्न धूल को बाहर ननकाल सके। ननकाली गई और हटाई गई धूल का ननपटान ऐसी नवनध और ऐसे िरीके से नकया जाएगा नक वह

नकसी र्ी कमरे की हवा में न जाए; और प्रत्येक अन्य नफल्टररंग या ननपटान उपकरर् को, जो उस कमरे में नस्िि हो नजसमें ऐसे बैग या अन्य नफल्टररंग या ननपटान उपकरर्

की िेखर्ाल करने वाले व्यनियों के अलावा, काययरि व्यनि हों, उस कमरे की सामान्य हवा से पूरी िरह से अलग एक बाडे में रखा जाएगा जो खुली हवा में संवानिि हो।

(5) िेंभटिेभटंर् प्िांट का संचािन: उप-अनुच्छेि (4) के प्रयोजन के नलए प्रिान नकया गया वेंनटलेनटंग प्लांट, जब र्ी ब्लानस्टंग एनक्ट्लोजर उपयोग में हो, ननरंिर

संचालन में रखा जाएगा, चाहे उसमें वास्िव में ब्लानस्टंग हो रही हो या नहीं, और ब्लानस्टंग चैंबर के मामले में, यह िब र्ी संचालन में रहेगा जब कोई व्यनि सफाई के

उद्देश्य से चैंबर के अंिर हो।

4. सुरिात्मक हेिमेट, िस्ताने और ओिरऑि का प्रािधान –

(1) ब्लानस्टंग चैंबर में ननयोनजि सर्ी व्यनियों के उपयोग के नलए, चाहे वे ब्लानस्टंग में हों या उससे संबंनधि नकसी कायय में या ऐसे चैंबर की सफाई में, मुख्य ननरीक्षक-

सह-सुनवधाप्रिािा के प्रमार् पत्र द्वारा अनुमोनिि प्रकार के सुरक्षात्मक हेलमेट उपलब्ध कराए जाएंगे और उनका रखरखाव नकया जाएगा; और ऐसा प्रत्येक व्यनि चैंबर में

रहिे हुए इस उपयोग के नलए प्रिान नकए गए हेलमेट को पहनेगा और चैंबर के बाहर जाने िक इसे नहीं उिारेगा।

(2) प्रत्येक सुरक्षात्मक हेलमेट पर एक नवनशष्ट नचि होगा जो उस व्यनि को इंनगि करेगा नजसके द्वारा इसका उपयोग नकया जाना है और नकसी र्ी व्यनि को ऐसा हेलमेट

पहनने की अनुमनि नहीं िी जाएगी या उसे पहनने के नलए बाध्य नहीं नकया जाएगा नजस पर उसका नचि न हो या ऐसा हेलमेट जो नकसी अन्य व्यनि द्वारा पहना गया हो

और नजसे बाि में पूरी िरह से कीटार्ुरनहि न नकया गया हो।

(3) उपयोग में आने वाले प्रत्येक सुरक्षात्मक हेलमेट को कम से कम 170 लीटर प्रनि नमनट की िर से स्वच्छ और अत्यनधक ठंडी हवा प्रिान की जाएगी।

(4) नवस्फोट करिे समय या नवस्फोट में सहायिा करिे समय सर्ी व्यनियों के उपयोग के नलए उपयुि िस्िाने और ओवरऑल प्रिान नकए जाएँगे, और ऐसा प्रत्येक

व्यनि ऐसा करिे समय, प्रिान नकए गए िस्िाने और ओवरऑल पहनेगा।

5. सफाई और अन्य कायग के संबंध में सािधाभनयां - (1) जहां कोई व्यनि नकसी ब्लानस्टंग उपकरर् या ब्लानस्टंग बाडे या उससे जुडे नकसी उपकरर्

या वेंनटलेशन प्लांट या उसके आसपास के क्षेत्र की सफाई में लगा हो या नकसी ब्लानस्टंग उपकरर् या ब्लानस्टंग बाडे या उससे जुडे नकसी उपकरर् या

वेंनटलेशन प्लांट से संबंनधि नकसी अन्य कायय में लगा हो नजससे उसे ब्लानस्टंग से उत्पन्न धूल को सांस के जररए अंिर लेने का खिरा हो, िो ऐसी सांस के

जररए अंिर जाने से रोकने के नलए सर्ी व्यावहाररक उपाय नकए जाएंगे।

(2) अनुच्छेि 5 में उनल्लनखि नकसी र्ी सफाई कायय के संबंध में, और नफल्टररंग या ननपटान उपकरर्ों से धूल हटाने के संबंध में, धूल को इस प्रकार से

ननपटाने के नलए सर्ी व्यावहाररक उपाय नकए जाएँगे नक वह नकसी र्ी कमरे की हवा में प्रवेश न करे। ऐसे सफाई कायों के नलए वैक्ट्यूम क्ट्लीनर उपलब्ध

कराए जाएँगे और जहाँ र्ी संर्व हो, उनका उपयोग नकया जाएगा।

6. सुरक्षात्मक वस्त्रों के नलए र्ंडारर् स्िान - अनुच्छेि 5 द्वारा प्रिान नकए जाने वाले हेलमेट, गौंटलेट और ओवरऑल के नलए पयायप्त और उपयुि र्ंडारर्

स्िान प्रत्येक ब्लानस्टंग बाडे के बाहर और सुनवधाजनक रूप से ननकट उपलब्ध कराए जाएंगे और ऐसे स्िान को साफ-सुिरा रखा जाएगा। हेलमेट, गौंटलेट

और ओवरऑल जब वास्िनवक उपयोग में न हों, िो उन्हें इसी स्िान पर रखा जाएगा।

7. सुरिात्मक िस्त्रों का रखरखाि और सफाई - इस अनुसूची के प्रयोजनों के नलए प्रिान नकए गए और पहने जाने वाले सर्ी हेलमेट, गौंटलेट,

ओवरऑल और अन्य सुरक्षात्मक उपकरर् या वस्त्र अच्छी नस्िनि में रखे जाएंगे और जहाँ िक संर्व हो, उन्हें प्रत्येक काययनिवस पर साफ नकया जाएगा।

जहाँ ऐसे सुरक्षात्मक वस्त्रों या उपकरर्ों की सफाई से उत्पन्न धूल के साँस के द्वारा अंिर जाने की संर्ावना हो, वहाँ ऐसी साँस के द्वारा धूल के अंिर जाने से

रोकने के नलए सर्ी व्यावहाररक उपाय नकए जाएंगे। जहाँ िक संर्व हो, ऐसे कपडों से धूल हटाने के नलए वैक्ट्यूम क्ट्लीनर का उपयोग नकया जाएगा और

नकसी र्ी कपडे से धूल हटाने के नलए संपीनडि हवा का उपयोग नहीं नकया जाएगा।

8. िैक्यूम क्िीभनंर् प्िांट का रखरखाि - इस अनुसूची के प्रयोजन के नलए उपयोग नकए जाने वाले वैक्ट्यूम क्ट्लीननंग प्लांट का उनचि रखरखाव नकया

जाएगा।

[PART IV

DELHI GAZETTE : EXTRAORDINARY

53

9. भकशोरों के रोजर्ार में प्रभतबंध –

(1) 18 वर्य से कम आयु के नकसी र्ी व्यनि को ब्लानस्टंग में या ब्लानस्टंग में सहायिा करने या नकसी ब्लानस्टंग चैंबर में या नकसी ब्लानस्टंग उपकरर् या

नकसी ब्लानस्टंग बाडे या उससे जुडे नकसी उपकरर् या वेंनटलेशन प्लांट की सफाई में ननयोनजि नहीं नकया जाएगा या ऐसे उपकरर्, बाडे या प्लांट के

रखरखाव या मरम्मि कायय में ननयोनजि नहीं नकया जाएगा।

(2) 18 वर्य से कम आयु के नकसी र्ी व्यनि को नकसी र्ी ब्लानस्टंग बाडे के बीस फीट के र्ीिर ननयनमि रूप से काम करने के नलए ननयोनजि नहीं नकया

जाएगा, जब िक नक बाडा नकसी कमरे में न हो और वह उस कमरे के बाहर न हो जहाँ वह बाडे से आने वाली नकसी र्ी धूल से प्रर्ावी रूप से अलग हो।

10. छूट िेने या भशभर्थि करने की शभक्त - (1) यनि मुख्य ननरीक्षक-सह-सुनवधाप्रिािा इस बाि से संिुष्ट है नक नकसी कारखाने या कारखाने के नकसी

वगय में, नवस्फोटन में अपघर्यक के रूप में रेि या मुि नसनलका युि अन्य पिािय का उपयोग नकसी नवशेर् ननमायर् या प्रनिया (धािु ढलाई के ननमायर् से

संबंनधि या पूरक प्रनिया को छोडकर) के नलए आवश्यक है और नक ननमायर् या प्रनिया ऐसे अपघर्यक के उपयोग के नबना नहीं की जा सकिी है या नक

नवशेर् पररनस्िनियों या कायय की नवशेर् नवनध के कारर् या अन्यिा इस अनुसूची की नकसी आवश्यकिा को ननयोनजि व्यनियों के स्वास््य को खिरे में

डाले नबना नशनिल नकया जा सकिा है या नक ऐसी नकसी आवश्यकिा का अनुप्रयोग नकसी र्ी कारर् से अव्यावहाररक या अनुनचि है, िो वह सरकार की

पूवय स्वीकृनि से, नलनखि आिेश द्वारा उि कारखाने या कारखाने के वगय को इस अनुसूची के ऐसे प्रावधानों से, उस सीमा िक और ऐसी शिों के अधीन

और ऐसी अवनध के नलए छूट िे सकिा है जो उि आिेश में नननियष्ट की जा सकिी है।

(2) जहाँ उप-अनुच्छेि (1) के अंिगयि छूट प्रिान की गई है, वहाँ आिेश की एक प्रनि कारखाने के मुख्य प्रवेश द्वार या प्रवेश द्वारों पर नकसी प्रमुख स्िान

पर सूचना पट्ट पर और उस स्िान पर र्ी प्रिनशयि की जाएगी जहाँ नवस्फोटन नकया जािा है।

11. भचभकत्सा अभधकारी द्वारा भचभकत्सा परीिण -

(1) इस अनुसूची में शानमल नकसी र्ी प्रनिया में ननयोनजि प्रत्येक कमयचारी की उसकी पहली ननयुनि के 15 निनों के र्ीिर एक नचनकत्सा अनधकारी द्वारा

जाँच की जाएगी। ऐसी जाँच में पल्मोनरी फंक्ट्शन टेस्ट और छािी के एक्ट्स-रे शानमल होंगे। नकसी र्ी कमयचारी को कारखाने में उसकी पहली ननयुनि के 15

निनों के बाि िब िक काम करने की अनुमनि नहीं िी जाएगी जब िक नक नचनकत्सा अनधकारी द्वारा उसे ऐसी ननयुनि के नलए उपयुि प्रमानर्ि न कर निया

जाए।

(2) उि प्रनियाओं में ननयोनजि प्रत्येक कमयचारी की प्रत्येक 12 कैलेंडर महीनों में कम से कम एक बार नचनकत्सा अनधकारी द्वारा पुनिः जाँच की जाएगी

और ऐसी पुनिः जाँच में, जहाँ र्ी नचनकत्सा अनधकारी उनचि समझे, प्रत्येक िीन वर्ों में एक बार पल्मोनरी फंक्ट्शन टेस्ट और छािी का एक्ट्स-रे शानमल

होगा।

(3) नचनकत्सा अनधकारी, कमयचारी की जाँच करने के बाि, प्रपत्र-24 में स्वास््य प्रमार् पत्र जारी करेगा। नकए गए परीक्षर् और पुन: परीक्षर्ों का ररकॉडय

प्रमार् पत्र में िजय नकया जाएगा और प्रमार् पत्र कारखाने के अनधर्ोगी की अनर्रक्षा में रखा जाएगा। उप-अनुच्छेि (1) और (2) के अंिगयि नकए गए

प्रत्येक परीक्षर् का ररकॉडय, नजसमें परीक्षर्ों की प्रकृनि और पररर्ाम शानमल हैं, नचनकत्सा अनधकारी द्वारा फॉमय-25 में एक स्वास््य रनजस्टर में र्ी िजय

नकया जाएगा।

(4) स्वास््य प्रमार्पत्र और स्वास््य रनजस्टर ननरीक्षक-सह-सुनवधाप्रिािा द्वारा ननरीक्षर् के नलए आसानी से उपलब्ध रखा जाएगा।

(5) यनि नकसी र्ी समय नचनकत्सा अनधकारी की राय में कोई कमयचारी उि प्रनियाओं में रोजगार के नलए इस आधार पर अब उपयुि नहीं है नक उसमें

54

DELHI GAZETTE : EXTRAORDINARY

PART IV]

बने रहने से कमयचारी के स्वास््य को नवशेर् खिरा होगा, िो वह उि प्रमार्पत्र और स्वास््य रनजस्टर में अपने ननष्ट्कर्ों को िजय करेगा। उन िस्िावेजों में

उसके ननष्ट्कर्ों की प्रनवनष्ट में वह अवनध र्ी शानमल होनी चानहए नजसके नलए वह समझिा है नक उि व्यनि उि प्रनियाओं में काम करने के नलए अयोग्य

है। प्रनिया से इस प्रकार ननलंनबि व्यनि को वैकनल्पक स्िान-स्िापन सुनवधाएँ प्रिान की जाएँगी, जब िक नक वह नचनकत्सा अनधकारी की राय में पूरी िरह

से अक्षम न हो, ऐसी नस्िनि में प्रर्ानवि व्यनि का उनचि पुनवायस नकया जाएगा।

(6) उप-अनुच्छेि (5) में उनल्लनखि अनुसार कायय करने के नलए अयोग्य पाए गए नकसी र्ी व्यनि को उि प्रनियाओं में पुनिः ननयोनजि या कायय करने की

अनुमनि नहीं िी जाएगी, जब िक नक नचनकत्सा अनधकारी, आगे की जाँच के बाि, उसे पुनिः उन प्रनियाओं में ननयोजन के नलए योग्य प्रमानर्ि न कर िे।

………………………..

अनुसूची-IX

कच्ची खािों और चमों का चूना-शोधन और

रंर्ाई तर्था उससे संबंभधत प्रभियाएँ।

1. चेतािनी सूचनाएँ –

(1) मुख्य ननरीक्षक-सह-सुनवधाकिाय द्वारा नननियष्ट प्रपत्र में एंथ्रेक्ट्स के संबंध में चेिावनी सूचनाएँ कारखाने में प्रमुख स्िानों पर लगाई जाएँगी, जहाँ उन्हें ननयोनजि व्यनि

आसानी से और सुनवधापूवयक पढ सकें।

(2) मुख्य ननरीक्षक-सह-सुनवधाकिाय द्वारा नननियष्ट प्रपत्र में एंथ्रेक्ट्स के संबंध में चेिावनी सूचना की एक प्रनि प्रत्येक ननयोनजि व्यनि को, जब वह काययरि हो, और बाि में

यनि वह अर्ी र्ी काययरि हो, प्रत्येक

कैलेंडर वर्य के पहले निन िी जाएगी।

(3) त्वचा पर िोम के प्रर्ावों के संबंध में चेिावनी सूचनाएँ प्रत्येक कारखाने में प्रमुख स्िानों पर लगाई जाएँगी जहाँ िोम नवलयनों का उपयोग नकया जािा है और ऐसी

सूचनाएँ इस प्रकार लगाई जाएँगी नक ननयोनजि व्यनि उन्हें आसानी से और सुनवधापूवयक पढ सकें।

(4) कारखाने में प्रमुख स्िानों पर सूचनाएँ नचपकाई जाएँगी नजनमें प्रािनमक उपचार बॉक्ट्स या अलमारी की नस्िनि और उस बॉक्ट्स या अलमारी के प्रर्ारी व्यनि का नाम

नलखा होगा।

(5) यनि कारखाने में काययरि कोई व्यनि ननरक्षर है, िो ऐसे ननरक्षर व्यनि को उप-अनुच्छेि (1), (2) और (4) में नननियष्ट सूचना की नवर्य-वस्िु और यनि कारखाने

में िोम-नमश्रर् का उपयोग नकया जािा है, िो उप-अनुच्छेि (3) में नननियष्ट सूचना की नवर्य-वस्िु को सावधानीपूवयक समझाने के नलए प्रर्ावी किम उठाए जाएँगे।

2. सुरिात्मक िस्त्र - अनधर्ोगी ननम्ननलनखि सुरक्षात्मक वस्त्र उपलब्ध कराएगा और उन्हें अच्छी नस्िनि में रखेगा:-

(क) िोम-नमश्रर् के संपकय में आने वाली प्रनियाओं में काययरि व्यनियों के नलए जलरोधक जूिे, पैर ढकने वाले कपडे, एप्रन और िस्िाने, नजसमें ऐसे घोल िैयार करना

र्ी शानमल है;

(ख) चूना-र्ंडार में काययरि व्यनियों के नलए िस्िाने और जूिे;

(ग) उप-अनुच्छेि (क) और (ख) में नननियष्ट प्रनियाओं के अलावा, खाल और चमडा संचालन संबंधी प्रनियाओं में ननयोनजि व्यनियों के नलए सुरक्षात्मक जूिे, एप्रन

और िस्िाने:

परन्‍िु यह उपबंनधि है नक:-

(i) िस्िाने, एप्रन, पैर ढकने वाले कवर या जूिे रबर या चमडे के हो सकिे हैं, लेनकन उप-अनुच्छेि (क) और (ख) के अंिगयि प्रिान नकए जाने वाले िस्िाने और जूिे

रबर के होंगे।

[PART IV

DELHI GAZETTE : EXTRAORDINARY

55

(ii) िस्िाने हाि से मांस काटने वाले व्यनियों को प्रिान नहीं नकए जा सकिे या उन प्रनियाओं में ननयोनजि नहीं नकए जा सकिे नजनमें चूने, सोनडयम सल्फाइड या अन्य

कानस्टक द्रव के संपकय का कोई खिरा नहीं है।

3. धुिाई सुभिधाएँ, िोजन कि और क्िोकरूम - ननयोनजि सर्ी व्यनियों के उपयोग के नलए स्वच्छ और अच्छी नस्िनि में ननम्ननलनखि की व्यवस्िा और रखरखाव

नकया जाएगा -

(क) एक नचकनी, अर्ेद्य सिह वाला एक कुंड नजसमें नबना प्लग वाला अपनशष्ट पाइप लगा हो और नजसकी लंबाई इिनी हो नक नकसी र्ी समय काययरि प्रत्येक पाँच

व्यनियों के नलए कम से कम 60 सेंटीमीटर पानी की अनुमनि हो, और कुंड के ऊपर नल या जेट से 60 सेंटीमीटर से अनधक अंिराल पर पानी की ननरंिर आपूनिय हो;

या

(ख) नकसी र्ी समय ननयोनजि प्रत्येक िस ऐसे व्यनियों के नलए कम से कम एक वॉशबेनसन, नजसमें अपनशष्ट पाइप और प्लग लगा हो और नजसमें स्वच्छ पानी की

ननरंिर आपूनिय हो; साि ही, िोनों ही नस्िनियों में, नेल ब्रश, साबुन या अन्य उपयुि सफाई सामग्री और स्वच्छ िौनलये की पयायप्त आपूनिय हो;

(ग) एक उपयुि र्ोजन कक्ष, जो र्ोजन के अंिराल के िौरान पररसर में मौजूि लोगों की संख्या के नलए पयायप्त हो, नजसमें पयायप्त मेजें और बेंच और र्ोजन गमय करने और

पानी उबालने के नलए पयायप्त साधन उपलब्ध हों। मेस रूम -

(i) नकसी ऐसे कमरे या शेड से अलग होगा नजसमें खाल या चमडे का र्ंडारर्, उपचार या हेरफेर नकया जािा है;

(ii) क्ट्लॉकरूम से अलग होगा; और

(iii) नकसी नजम्मेिार व्यनि के प्रर्ार में रखा जाएगा; और

(घ) अनधर्ोगी सर्ी ननयोनजि व्यनियों के उपयोग के नलए कायय समय के िौरान उिारे जाने वाले कपडों के नलए उपयुि स्िान और सुरक्षात्मक कपडों के नलए एक अन्य

स्िान प्रिान करेगा और बनाए रखेगा, साि ही िोनों ही मामलों में, यनि कपडे गीले हों, िो उन्हें सुखाने के नलए पयायप्त व्यवस्िा र्ी करेगा। इस प्रकार प्रिान नकया गया

स्िान हर समय साफ रखा जाएगा और नकसी नजम्मेिार व्यनि के प्रर्ार में रखा जाएगा।

4. कायग किों में िोजन, पेय आभि भनभषद्ध - नकसी र्ी ऐसे कायय कक्ष या शेड में, नजसमें खाल या चमडे का र्ंडारर्, उपचार या हेरफेर नकया जािा है, नकसी र्ी

कमयचारी द्वारा र्ोजन, पेय, पान और सुपारी या िंबाकू नहीं लाया जाएगा या उसका सेवन नहीं नकया जाएगा।

5. भचभकत्सा अभधकारी द्वारा भचभकत्सा परीिण - (1) प्रत्येक कमयचारी की उसके पहले रोजगार के 15 निनों के र्ीिर एक नचनकत्सा अनधकारी द्वारा जांच की

जाएगी। ऐसी परीक्षा में यह शानमल होगा नक नकसी र्ी कमयचारी को कारखाने में उसकी पहली ननयुनि के 15 निन बाि काम करने की अनुमनि नहीं िी जाएगी जब िक

नक उसे नचनकत्सा अनधकारी द्वारा ऐसी ननयुनि के नलए उपयुि प्रमानर्ि न कर निया जाए।

(2) उि प्रनियाओं में ननयोनजि प्रत्येक कमयचारी की नचनकत्सा अनधकारी द्वारा प्रत्येक बारह कैलेंडर माह में कम से कम एक बार पुनिः जाँच की जाएगी। ऐसी पुनिः जाँच

में, जहाँ र्ी नचनकत्सा अनधकारी उनचि समझे, उप-अनुच्छेि (1) में नननियष्ट परीक्षर् शानमल होंगे।

(3) नचनकत्सा अनधकारी, नकसी कमयचारी की जाँच के बाि, प्रपत्र-05 में स्वास््य प्रमार्पत्र जारी करेगा। की गई जाँच और पुन: जाँच का ररकॉडय प्रमार्पत्र में िजय नकया

जाएगा और प्रमार्पत्र कारखाने के अनधर्ोगी की अनर्रक्षा में रखा जाएगा। उप-अनुच्छेि (1) और (2) के अंिगयि की गई प्रत्येक जाँच का ररकॉडय, नजसमें परीक्षर्ों की

प्रकृनि और पररर्ाम शानमल हैं, नचनकत्सा अनधकारी द्वारा प्रपत्र-25 में स्वास््य रनजस्टर में र्ी िजय नकया जाएगा।

(4) स्वास््य प्रमार्पत्र और स्वास््य रनजस्टर ननरीक्षक-सह-सुनवधाप्रिािा द्वारा ननरीक्षर् हेिु ित्परिापूवयक उपलब्ध रखे जाएँगे।

(5) यनि नकसी र्ी समय नचनकत्सा अनधकारी की यह राय हो नक कोई कमयचारी उि प्रनियाओं में इस आधार पर ननयोजन के नलए अब उपयुि नहीं है नक उसमें बने

रहने से उसके स्वास््य को नवशेर् खिरा हो सकिा है, िो वह उि प्रमार्पत्र और स्वास््य रनजस्टर में अपने ननष्ट्कर्ों का अनर्लेख बनाएगा। इन िस्िावेजों में उसके ननष्ट्कर्ों

की प्रनवनष्ट में वह अवनध र्ी शानमल होनी चानहए नजसके नलए वह समझिा है नक उि व्यनि उि प्रनियाओं में कायय करने के नलए अयोग्य है। प्रनिया से इस प्रकार

ननलंनबि व्यनि को वैकनल्पक स्िान-स्िापन सुनवधाएँ प्रिान की जाएँगी, जब िक नक नचनकत्सा अनधकारी की राय में वह पूरी िरह से अक्षम न हो जाए, जहाँ प्रर्ानवि

व्यनि का उनचि पुनवायस नकया जा सके।

56

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(6) कोई र्ी व्यनि, जो ऊपर उप-अनुच्छेि (5) में उनल्लनखि अनुसार कायय करने के नलए अयोग्य पाया गया है, उसे उि प्रनियाओं में िब िक पुनिः ननयोनजि या कायय

करने की अनुमनि नहीं िी जाएगी जब िक नक नचनकत्सा अनधकारी, आगे की जाँच के बाि, उसे उन प्रनियाओं में ननयोजन के नलए पुनिः योग्य प्रमानर्ि न कर िे।

...........................

अनुसूची-X

मुद्रण मशीनों और टाइभपंर् मशीनों में सीसा और

सीसा सामग्री की कुछ प्रभियाओं का संचािन

ढिाई कारखाने

1. छूट - जहाँ मुख्य ननरीक्षक-सह-सुनवधाप्रिािा इस बाि से संिुष्ट है नक इस अनुसूची के सर्ी या कोई र्ी प्रावधान ननयोनजि व्यनियों की सुरक्षा के नलए

आवश्यक नहीं हैं, वहाँ वह नलनखि प्रमार्पत्र द्वारा नकसी र्ी कारखाने को उन शिों के अधीन, जो वह उसमें नननियष्ट करे, सर्ी या नकसी र्ी प्रावधान से

छूट िे सकिा है। ऐसा प्रमार्पत्र मुख्य ननरीक्षक-सह-सुनवधाप्रिािा द्वारा नकसी र्ी समय रद्द नकया जा सकिा है।

2. पररिाषाएँ - इस अनुसूची के प्रयोजन के नलए –

(क) "सीसा सामग्री" का अिय है वह सामग्री नजसमें कम से कम पाँच प्रनिशि सीसा हो;

(ख) "सीसा प्रनिया" का अिय है –

(i) ढलाई और यांनत्रक संयोजन के नलए सीसा या नकसी र्ी सीसा सामग्री का नपघलना;

(ii) प्रयुि सीसा सामग्री से मशीनों को पुनिः चाजय करना;

(iii) नपघलने वाले बियनों से कचरा हटाना और प्लंजरों की सफाई सनहि कोई अन्य कायय; और

(iv) सीसा सामग्री का संचालन, संचलन या अन्य उपचार।

(ग) "कुशल एग्जॉस्ट ड्रै्ट " का अिय है गैस, वाष्ट्प, धूल या धुएँ को हटाने के नलए शीर्य या यांनत्रक साधनों द्वारा नकया गया स्िानीयकृि वेंनटलेशन िानक उन्हें नकसी र्ी

ऐसे स्िान की हवा में फैलने से रोका जा सके जहाँ कायय नकया जा रहा हो। नकसी र्ी ड्रा्ट को कुशल नहीं माना जाएगा जो उस नबंिु पर उत्पन्न धुएँ को हटाने में नवफल

रहिा है जहाँ से ऐसी गैस, वाष्ट्प, धुआँ या धूल उत्पन्न होिी है।

3. एग्जॉस्ट ड्रैफ्ट -

(1) ननम्ननलनखि में से कोई र्ी प्रनिया कुशल एग्जॉस्ट ड्रै्ट के नबना नहीं की जाएगी, जब िक नक उसे इस प्रकार न नकया जाए नक गैस, वाष्ट्प, धुएँ या धूल को नकसी

ऐसे स्िान पर मुि रूप से ननकलने से रोका जा सके जहाँ कायय नकया जा रहा हो, या जब िक नक उसे नवद्युिीय रूप से गमय और िापीय रूप से ननयंनत्रि नपघलने वाले

बियनों में न नकया जाए:-

(क) सीसा पिािय या स्लग को नपघलाना; और

(ख) सीसा पिािय को इस प्रकार गमय करना नक सीसा युि वाष्ट्प ननकल जाए।

परंिु उपरोि प्रनियाएँ कुशल एग्जॉस्ट ड्रै्ट के नबना र्ी की जा सकिी हैं यनि उन्हें इस प्रकार नकया जाए नक गैस, वाष्ट्प, धुएँ या धूल को नकसी ऐसे स्िान पर मुि रूप

से ननकलने से रोका जा सके जहाँ कायय नकया जा रहा हो या नवद्युिीय रूप से गमय और िापीय रूप से ननयंनत्रि नपघलने वाले पात्रों में नकया जा रहा हो।

(2) ऐसा एग्जॉस्ट ड्रै्ट यांनत्रक साधनों द्वारा प्रर्ानवि होगा और इस प्रकार से नननमयि नकया जाएगा नक वह ननकलने वाली धूल, धुएँ, गैस या वाष्ट्प पर उसके उद्गम नबंिु

के यिासंर्व ननकट कायय करे।

(3) (क) धूल के ननष्ट्कर्यर् या िमन के नलए सर्ी उपकरर्ों की प्रत्येक छह माह में कम से कम एक बार सक्षम व्यनि द्वारा जांच और परीक्षर् नकया जाएगा, और ऐसी

जांच और परीक्षर् द्वारा प्रकट नकसी र्ी िोर् को यिाशीघ्र ठीक नकया जाएगा।

(ख) ऐसी जांच और परीक्षर् के नववरर् वाला एक रनजस्टर प्रपत्र संख्या 26 में रखा जाएगा।

[PART IV

DELHI GAZETTE : EXTRAORDINARY

57

4. र्िगिती मभहिाओं और भकशोरों से संबंभधत भनषेध - नकसी र्ी गर्यविी मनहला या नकशोर को नकसी र्ी सीसा प्रनिया में ननयोनजि या काम करने की अनुमनि

नहीं िी जाएगी।

5. कुछ प्रभियाओं का पृर्थक्करण- ननम्ननलनखि प्रनियाओं में से प्रत्येक को इस प्रकार और ऐसी शिों के िहि नकया जाएगा िानक एक िूसरे से और नकसी र्ी अन्य

प्रनियाओं से प्रर्ावी पृिक्ट्करर् सुनननिि हो सके:-

(क) सीसा या नकसी सीसा सामग्री का नपघलना;

(ख) सीसा नसनल्लयों की ढलाई; और

(ग) यांनत्रक संयोजन।

6. अपभशष्ट के भिए पात्र - कसकर नफट होने वाले ढक्ट्कन वाला एक उपयुि पात्र प्रिान नकया जाएगा और प्रत्येक नपघलने वाले बियन से अपनशष्ट ननकालने के नलए

उसका उपयोग नकया जाएगा। ऐसा पात्र मशीन के पास कायय कक्ष में रहिे हुए ढका रहेगा, नसवाय इसके नक जब अपनशष्ट उसमें जमा नकया जा रहा हो।

7. कायग कि का फशग - प्रत्येक कायय कक्ष का फशय जहाँ सीसा प्रनिया की जािी है, वह -

(क) सीमेंट या इसी िरह की सामग्री का होगा िानक वह नचकना और पानी के नलए अर्ेद्य हो;

(ख) अच्छी नस्िनि में रखा जाएगा; और

(क) उस स्िान पर कोई अन्य कायय न होने पर, पानी से अच्छी िरह गीला करने के बाि, प्रनिनिन पूरी िरह से साफ नकया जाएगा।

8. िोजन कि - सीसा प्रनिया में काययरि और र्ोजन के अंिराल के िौरान पररसर में रहने वाले सर्ी व्यनियों के उपयोग के नलए एक उपयुि र्ोजन कक्ष उपलब्ध

कराया जाएगा और उसका रखरखाव नकया जाएगा, नजसमें पयायप्त मेज और बेंच उपलब्ध होंगे।

9. धुिाई सुभिधाएँ - (1) सीसा प्रनिया में काययरि सर्ी व्यनियों के उपयोग के नलए स्वच्छ और अच्छी मरम्मि की व्यवस्िा और रखरखाव के साि ननम्‍नांनकि

अनुसार धुलाई स्‍िान उपलब्‍ध नकया जाएगा -

(क) एक धुलाई स्िान नजसमें या िो -

(i) एक नचकनी अर्ेद्य सिह वाला एक कुंड हो नजसमें प्लग रनहि अपनशष्ट पाइप लगा हो और नजसकी लंबाई इिनी हो नक नकसी र्ी समय काययरि प्रत्येक पाँच ऐसे

व्यनियों के नलए कम से कम 60 सेंटीमीटर पानी की व्यवस्िा हो, और कुंड के ऊपर नलों या जेट से अनधकिम 60 सेंटीमीटर के अंिराल पर पानी की ननरंिर आपूनिय

हो; या

(ii) नकसी र्ी समय काययरि प्रत्येक पाँच ऐसे व्यनियों के नलए कम से कम एक वॉश बेनसन हो, नजसमें अपनशष्ट पाइप और प्लग लगा हो और नजसमें पयायप्त पानी रखा

हो या हमेशा आसानी से उपलब्ध हो; और

(ख) उपयुि सामग्री से बने साफ िौनलये की पयायप्त आपूनिय हो, नजन्हें प्रनिनिन नवीनीकृि नकया जािा हो, साि ही साबुन या अन्य उपयुि सफाई सामग्री की पयायप्त आपूनिय

हो।

10. भचभकत्सा अभधकारी द्वारा भचभकत्सा परीिण - (1) सीसा प्रनिया में काययरि प्रत्येक कमयचारी की उसके प्रिम ननयोजन के 15 निनों के र्ीिर एक नचनकत्सा

अनधकारी द्वारा जाँच की जाएगी। ऐसी जाँच में मूत्र और रि में सीसे की जाँच, मूत्र में एएलए, हीमोग्लोनबन की मात्रा, कोनशकाओं का नस्टपनलंग और नस्िरिा परीक्षर्

शानमल होंगे। नकसी र्ी कमयचारी को कारखाने में उसके पहले रोज़गार के 15 निनों के बाि िब िक काम करने की अनुमनि नहीं िी जाएगी जब िक नक उसे नचनकत्सा

अनधकारी द्वारा ऐसे रोज़गार के नलए उपयुि प्रमानर्ि न कर निया जाए।

(2) उि प्रनियाओं में ननयोनजि प्रत्येक कमयचारी की प्रत्येक छह कैलेंडर महीनों में कम से कम एक बार नचनकत्सा अनधकारी द्वारा पुनिः जाँच की जाएगी। ऐसी पुनिः जाँच

में, जहाँ र्ी नचनकत्सा अनधकारी उनचि समझे, उप-पैराग्राफ (1) में नननियष्ट परीक्षर् शानमल होंगे।

(3) नचनकत्सा अनधकारी, कमयचारी की जाँच के बाि, प्रपत्र-24 में स्वास््य प्रमार्पत्र जारी करेगा। की गई जाँच और पुनिः जाँच का ररकॉडय प्रमार्पत्र में िजय नकया जाएगा

58

DELHI GAZETTE : EXTRAORDINARY

PART IV]

और प्रमार्पत्र कारखाने के अनधर्ोगी की अनर्रक्षा में रखा जाएगा। उप-पैराग्राफ (1) और (2) के अंिगयि की गई प्रत्येक जाँच का ररकॉडय, नजसमें परीक्षर्ों की प्रकृनि

और पररर्ाम शानमल हैं, नचनकत्सा अनधकारी द्वारा प्रपत्र-25 में एक स्वास््य रनजस्टर में र्ी िजय नकया जाएगा।

(4) स्वास््य प्रमार्पत्र और स्वास््य रनजस्टर ननरीक्षक-सह-सुनवधाप्रिािा द्वारा ननरीक्षर् हेिु ित्परिा पूवयक उपलब्ध रखे जाएँगे।

(5) यनि नकसी र्ी समय नचनकत्सा अनधकारी की यह राय हो नक कोई कमी उि प्रनिया में इस आधार पर ननयोजन के नलए अब उपयुि नहीं है नक उसमें बने रहने से

कमी के स्वास््य को नवशेर् खिरा होगा, िो वह उि प्रमार्पत्र और स्वास््य रनजस्टर में अपने ननष्ट्कर्ों का अनर्लेख बनाएगा। इन िस्िावेजों में उसके ननष्ट्कर्ों की प्रनवनष्ट

में वह अवनध र्ी शानमल होनी चानहए नजसके नलए वह समझिा है नक उि व्यनि उि प्रनियाओं में कायय करने के नलए अयोग्य है। प्रनिया से इस प्रकार ननलंनबि व्यनि

को वैकनल्पक स्िान-स्िापन सुनवधाएँ प्रिान की जाएँगी, जब िक नक वह नचनकत्सा अनधकारी की राय में पूरी िरह से अक्षम न हो, ऐसी नस्िनि में प्रर्ानवि व्यनि का

उनचि पुनवायस नकया जाएगा।

(6) कोई र्ी व्यनि जो उप-अनुच्छेि (5) में उनल्लनखि अनुसार कायय करने के नलए अयोग्य पाया गया है, उसे उि प्रनियाओं में पुनिः ननयोनजि या कायय करने की

अनुमनि नहीं िी जाएगी, जब िक नक नचनकत्सा अनधकारी, आगे की जाँच के बाि, उसे उन प्रनियाओं में ननयोजन के नलए पुनिः प्रमानर्ि न कर िे।

11. कायग किों में िोजन, पेय आभि भनभषद्ध - नकसी र्ी कमयचारी द्वारा नकसी र्ी कायय कक्ष में, जहाँ कोई सीसा प्रनिया की जािी है, र्ोजन, पेय, पान और अन्य

उच्च गुर्वत्ता वाले िंबाकू का सेवन या लाना मना है।

12. अनधर्ोगी, सीसा प्रनिया में काययरि सर्ी व्यनियों को प्रनि वर्य िो पूर्य आस्िीन वाले ओवरऑल उपलब्ध कराएगा, उनकी साप्तानहक धुलाई की व्यवस्िा करेगा

और उन्हें अच्छी नस्िनि में रखेगा। ऐसी प्रनिया में काययरि व्यनि ऐसे कायय में लगे रहने के िौरान इन ओवरऑल को पहनेगा।

.............

अनुसूची-XI

रासायभनक कायग

िार् I

1. अनुप्रयोर् - यह अनुसूची रासायननक कायों में नकए जाने वाले सर्ी नवननमायर् और उससे संबंनधि प्रनियाओं पर लागू होगी।

2. पररिाषाएँ - इस अनुसूची के प्रयोजन के नलए –

(क) "रासायननक कायय" का अिय है कोई कारखाना या नकसी कारखाने के ऐसे र्ाग जो इस अनुसूची के पररनशष्ट 'क' में सूचीबि हैं;

(ख) "कुशल एग्जॉस्ट ड्रै्ट " का अिय है स्िानीयकृि वेंनटलेशन जो यांनत्रक या अन्य साधनों द्वारा गैस, वाष्ट्प, धुएँ या धूल को हटाने के नलए नकया जािा है िानक उसे

नकसी र्ी स्िान की हवा में फैलने से रोका जा सके जहाँ कायय नकया जािा है;

(ग) "ब्लीनचंग पाउडर" का अिय है ब्लीनचंग पाउडर नजसे आमिौर पर लाइम क्ट्लोराइड कहा जािा है;

(घ) "क्ट्लोरेट" का अिय है क्ट्लोरेट या परक्ट्लोरेट;

(ङ) "कानस्टक" का अिय है पोटेनशयम या सोनडयम हाइड्रॉक्ट्साइड;

(च) "िोम प्रनिया" का अिय है पोटेनशयम या सोनडयम के िोमेट या डाइिोमेट का ननमायर्, इन पिािों का हेरफेर, संचलन या अन्य उपचार;

(छ) "नाइरो या अमीनो प्रनिया" का अिय है नफनोल और बेंजीन या इसके समरूपों के नाइरो या अमीनो व्युत्पन्नों का ननमायर्, और इनमें से नकसी र्ी पिािय के उपयोग

से नवस्फोटक बनाना;

(ज) "कायय करने की अनुमनि" प्रर्ाली का अिय है र्ाग II के पैरा 20 के अंिगयि ननधायररि प्रनियाओं का अनुपालन;

(झ) "नवर्ाि पिािय" का अिय है वे सर्ी पिािय जो पयायप्त मात्रा में मानव शरीर में प्रवेश करने पर, श्वास द्वारा, अंिग्रयहर् द्वारा या त्वचा के माध्यम से अवशोर्र् द्वारा,

मृत्यु का कारर् बनिे हैं या स्वास््य को गंर्ीर नुकसान पहुँचािे हैं, या अपने अंिननयनहि रासायननक या जैनवक प्रर्ावों के कारर् इसके संपकय में आने वाले व्यनियों के

स्वास््य पर िीघयकानलक हाननकारक प्रर्ाव डालिे हैं। उन पिािों के संबंध में नजनका टीएलवी ननयम-131 में नननियष्ट है, उसमें नननियष्ट सांद्रिा से अनधक होने पर पिािय

नवर्ाि हो जाएगा;

[PART IV

DELHI GAZETTE : EXTRAORDINARY

59

(ञ) "आपािकाल" से िात्पयय ऐसी नस्िनि या िशा से है जो ऐसी पररनस्िनि या पररनस्िनियों के समूह को जन्म िेिी है नजसमें व्यनियों के जीवन या स्वास््य को खिरा

हो या नजसके पररर्ामस्वरूप बडी आग या नवस्फोट हो सकिा है या कायय और बाहरी वािावरर् में प्रिूर्र् हो सकिा है, नजससे श्रनमकों या पडोस पर गंर्ीर प्रर्ाव पड

सकिा है, ििा ित्काल कारयवाई की आवश्यकिा हो सकिी है;

(ट) "खिरनाक रासायननक अनर्नियाएँ" का अिय है उच्च गनि अनर्नियाएँ, अननयंनत्रि अनर्नियाएँ, नवलंनबि अनर्नियाएँ, आनि। और ये अनर्लक्षर् बडी मात्रा में

ऊष्ट्मा का उत्सजयन, नवर्ाि या ज्वलनशील गैसों या वाष्ट्पों का िीव्र उत्सजयन, अचानक िबाव का ननमायर् आनि हैं;

(ठ) "हेरफेर" का अिय है नमलाना, सनम्मश्रर् करना, र्रना, खाली करना, पीसना, छानना, सुखाना, पैक करना, झाडना, संर्ालना, उपयोग करना आनि;

(ड) "अनुमोनिि व्यनिगि सुरक्षा उपकरर्" का अिय है प्रासंनगक आईएसआई नवननिेशों के अनुरूप व्यनिगि सुरक्षा उपकरर् या उसके अर्ाव में, मुख्य ननरीक्षक-सह-

सुनवधाकिाय द्वारा अनुमोनिि व्यनिगि सुरक्षा उपकरर्;

(ढ) "उपयुि व्यनिगि सुरक्षा उपकरर्" का अिय है नक जब काययकिाय द्वारा सुरक्षात्मक उपकरर् का उपयोग नकया जािा है, िो उसके जीवन, स्वास््य या शरीर को कोई

खिरा नहीं होगा; और

(र्) "सीनमि स्िान" का अिय है उसके ननमायर् के कारर् कोई र्ी स्िान और साि ही उसमें नकए जा रहे कायय की प्रकृनि के संबंध में और जहाँ प्रवेश करने वाले या अंिर

काम करने वाले व्यनियों के नलए खिरे मौजूि हैं या काम के िौरान नवकनसि होने की संर्ावना है।

..................................

िार् II

सामान्य अपेिाएँ

पररभशष्ट 'क' में भिए र्ए सिी कायों पर िार्ू

1. र्ृह व्यिस्र्था -

(1) आगे की प्रनिया से पहले सामग्री के नकसी र्ी प्रकार के ररसाव को साफ नकया जाएगा।

(2) फशय, प्लेटफॉमय, सीनढयाँ, मागय और गैंगवे नकसी र्ी प्रकार की बाधा से मुि होंगे।

(3) सफाई की सुनवधा के नलए संयंत्र के सर्ी र्ागों िक पहुँच के आसान साधन उपलब्ध कराए जाएँगे।

2. रसायनों का अनुभचत उपयोर् - नकसी र्ी रसायन या नवलायक या रसायन या नवलायक युि खाली कंटेनर का उपयोग श्रनमकों द्वारा उन प्रनियाओं के अलावा

नकसी अन्य उद्देश्य के नलए करने की अनुमनि नहीं होगी नजनके नलए उन्हें आपूनिय की जािी है।

3. िोजन के उपयोर् पर प्रभतबंध स्पष्ट रूप से भनभिगष्ट भकया जाना चाभहए - कोई र्ी र्ोजन, पेय, िंबाकू, पान या कोई र्ी खाद्य पिािय संयंत्र या उपकरर् के नकसी

र्ी र्ाग पर या उसके आस-पास संगृहीि, गमय या उपर्ोग नहीं नकया जाएगा।

4. चेतािनी सूचनाएँ और भनिेश –

(1) अनधकांश श्रनमकों द्वारा समझी जाने वाली र्ार्ा में चेिावनी सूचनाएँ सर्ी खिरनाक क्षेत्रों में प्रमुखिा से प्रिनशयि की जाएँगी, नजसमें सर्ी श्रनमकों का ध्यान स्वास््य

के नलए खिरों, आग और नवस्फोट से जुडे खिरों और नकसी र्ी अन्य खिरे जैसे नक प्रनिया में प्रयुि सामग्री या पिािों के परीक्षर् के पररर्ाम या पीने या खाने के नलए

नकसी िूनर्ि कंटेनर का उपयोग करने के पररर्ामों के बारे में सचेि नकया जाएगा, नजन पर श्रनमकों का ध्यान उनकी सुरक्षा और स्वास््य सुनननिि करने के नलए आकनर्यि

नकया जाना चानहए।

60

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(2) उपरोि चेिावनी सूचना के अनिररि, ननरक्षर श्रनमकों सनहि सर्ी श्रनमकों को प्रनिया में आने वाले खिरों के बारे में ननिेश और नशक्षा िेने की व्यवस्िा की जाएगी,

नजसमें वे नवनशष्ट खिरे र्ी शानमल हैं नजनसे वे अपने काम के सामान्य िम में संपकय में आ सकिे हैं। ऐसे ननिेश और नशक्षा में अननधकृि और असुरनक्षि प्रिाओं में

शानमल खिरों से र्ी ननपटना चानहए, नजसमें सामान्य और असामान्य पररनस्िनियों में प्रनिया में प्रयुि पिािों के गुर् और प्रत्येक खिरे के प्रनि बरिी जाने वाली

सावधाननयाँ शानमल हैं। इसके अलावा, कमयचाररयों से उनके रोजगार के एक महीने के र्ीिर इस आशय का एक वचनपत्र प्राप्त नकया जाएगा नक उन्होंने चेिावनी नोनटस

और ननिेशों की नवर्यवस्िु पढ ली है, उन्हें समझ नलया है और उनका पालन करेंगे। सर्ी कमयचाररयों और पययवेक्षी कनमयों को निए जाने वाले प्रनशक्षर् और ननिेशों में

नवनर्न्न प्रकार के कंटेनरों और पाइपलाइनों पर नचपकाए गए या नचनत्रि लेबलों पर प्रयुि नवनर्न्न प्रकार के प्रिीकों और रंगों का महत्व शानमल होगा।

5. प्रभिया शुरू करने से पहिे सुरिा उपायों का मूल्यांकन और प्रािधान –

(1) पररनशष्ट 'क' के अंिगयि आने वाली नकसी र्ी प्रनिया, नकसी र्ी प्रायोनगक कायय, या नकसी र्ी नए ननमायर् को शुरू करने से पहले, अनधर्ोगी को वास्िनवक संचालन

और रासायननक प्रनिनियाओं, नजनमें खिरनाक रासायननक प्रनिनियाएँ र्ी शानमल हैं, से जुडे सर्ी खिरों का नननिि रूप से पिा लगाने के नलए हर संर्व किम उठाने

होंगे। प्रयुि कच्चे माल, बनने वाले अंनिम उत्पािों और ननमायर् के िौरान प्राप्त नकसी र्ी उप-उत्पाि के गुर्ों का सावधानीपूवयक अध्ययन नकया जाएगा और ननमायर् के

िौरान होने वाले नकसी र्ी खिरे, नजसमें श्रनमकों पर पडने वाले प्रर्ाव र्ी शानमल हैं, से ननपटने के नलए प्रावधान नकए जाएँगे।

(2) प्रनिया, उसके खिरों और उप-अनुच्छेि (1) के अनुसार सुरक्षा सुनननिि करने के नलए नडजाइन चरर् से ननपटान चरर् िक उठाए गए या प्रस्िानवि किमों का

नववरर् िेिे हुए नलनखि सूचना मुख्य ननरीक्षक-सह-सुनवधाप्रिािा को यिाशीघ्र र्ेजी जानी चानहए। परन्‍िु, यह सूचना नकसी र्ी नस्िनि में, पररनशष्ट 'क' के अंिगयि आने

वाली नकसी र्ी वस्िु का नवननमायर्, हैंडनलंग या र्ंडारर्, चाहे वह प्रायोनगक आधार पर हो, या पायलट प्लांट के रूप में या परीक्षर् उत्पािन के रूप में, या बडे पैमाने

पर नवननमायर् के रूप में, उसकी शुरूआि करने से कम से कम 15 निन पहले, अवश्‍य िी जानी चानहए।

(3) र्वनों, संयंत्रों और सुनवधाओं के नडज़ाइन, ननमायर्, स्िापना, संचालन, रखरखाव और ननपटान में

मूल्यांनकि सर्ी सुरक्षा और स्वास््य संबंधी खिरों से बचने के नलए प्रर्ावी सुरक्षा उपायों को ध्यान में रखा जाएगा।

(4) उप-अनुच्छेि (1) (2) और (3) के अंिगयि की गई अपेक्षाएँ कायय को ननयंनत्रि करने वाले नकसी र्ी अनधननयम में नननहि नकसी अन्य प्रावधान के स्िान पर या

उसके नवरुि कायय नहीं करेंगी।

6. अभधकृत प्रिेश - केवल अनधकृि व्यनियों को ही कारखाने या संयंत्र के नकसी र्ी ऐसे र्ाग में प्रवेश करने की अनुमनि होगी जहाँ कोई खिरनाक संचालन या

प्रनियाएँ चल रही हों या जहाँ खिरनाक रासायननक प्रनिनियाएँ हो रही हों या जहाँ खिरनाक रसायन संगृहीि हों।

7. उपकरणों और सुरिा उपकरणों की जाँच -

(1) प्रनिया में प्रयुि सर्ी उपकरर्ों और सुरक्षा उपकरर्ों का उपयोग में लाने से पहले और उनकी मरम्मि करने के बाि परीक्षर् नकया जाएगा और छह महीने में एक

बार नकसी सक्षम व्यनि द्वारा जाँच की जाएगी।

(2) प्रनिया में प्रयुि सर्ी उपकरर्ों और सुरक्षा उपकरर्ों का संचालन प्रनिनिन या आवश्यकिानुसार नकया जाएगा, िानक हर समय उनका प्रर्ावी और कुशल संचालन

सुनननिि हो सके।

8. भिद्युत प्रभतष्ठान - पररनशष्ट 'ए' में शानमल प्रनिया में प्रयुि सर्ी नवद्युि प्रनिष्ठान उस क्षेत्र में व्याप्त खिरों, जैसे धूल, नमी, संक्षारर्, ज्वलनशीलिा और नवस्फोटकिा

आनि से सुरक्षा सुनननिि करने के नलए उपयुि प्रकार के होंगे और उस क्षेत्र के नलए उनके ननमायर् और उपयोग को ननयंनत्रि करने वाले प्रासंनगक आईएसआई नवननिेशों

के अनुरूप होंगे।

9. रसायनों का संचािन और िंडारण –

(1) रसायनों के संचालन और र्ंडारर् के नलए कंटेनर, सामग्री की खिरनाक प्रकृनि को ध्यान में रखिे हुए पयायप्त मजबूि होने चानहए। कंटेनरों और उनकी सामग्री की

पहचान करने में सक्षम बनाने के नलए उन पर पयायप्त लेबनलंग और रंग-कोनडंग व्यवस्िा र्ी प्रिान की जाएगी, नजसमें खिरों और सुरनक्षि संचालन नवनधयों का संकेि निया

जाएगा और वे संबंनधि आईएसआई मानकों के अनुरूप होंगे। लेबल में निए गए ननिेशों का कडाई से पालन नकया जाएगा। क्षनिग्रस्ि कंटेनरों को केवल एक जानकार और

नजम्मेिार व्यनि की िेखरेख में ही संर्ाला जाएगा और उनचि साधनों का उपयोग करके सुरनक्षि िरीके से ररसाव को हाननरनहि बनाया जाएगा।

(2) अनर्निया पात्रों और कंटेनरों में रसायनों के र्ंडारर् सनहि रसायनों के र्ंडारर् की व्यवस्िा ऐसी होनी चानहए नक आग लगने, नवस्फोट होने या इन ननयमों में नननियष्ट

[PART IV

DELHI GAZETTE : EXTRAORDINARY

61

सीमा से अनधक पिािों के नवर्ाि संकेंद्रर् बनने का कोई जोनखम न हो।

(3) उप-अनुच्छेि (2) में उनल्लनखि आवश्यकिाओं की व्यापकिा पर प्रनिकूल प्रर्ाव डाले नबना, व्यवस्िाओं में उपयुि वेंनटलेशन सुनवधाएँ होंगी और पात्रों और

कंटेनरों में सुरनक्षि स्िर बनाए रखने में सक्षम होंगी। ऐसी व्यवस्िाओं में फशय के प्रकार, फशय की क्षमिा और आस-पास संगृहीि अन्य रसायनों के साि पिािों की अनुकूलिा

संबंधी आवश्यकिाओं को र्ी ध्यान में रखा जाएगा।

(4) (क) अत्यनधक अनस्िर, प्रनिनियाशील या नवस्फोटक रसायनों और मध्यविी उत्पािों का र्ंडारर् िो महीने के नलए आवश्यक मात्रा िक सीनमि होगा।

(ख) जब र्ी उपरोि खंड (क) में ननधायररि मात्रा से अनधक मात्रा का उपयोग नकया जाना हो, िो मुख्य ननरीक्षक-सह-सुनवधाप्रिािा की अनुमनि प्राप्त की जाएगी।

(ग) उपरोि खंड (क) और (ख) में नननहि नकसी र्ी बाि के होिे हुए र्ी, मुख्य ननरीक्षक-सह-सुनवधाप्रिािा, पररनशष्ट 'क' में शानमल प्रनियाओं को अंजाम िेने वाले

नकसी र्ी कारखाने को सुरक्षा के मद्देनजर खिरनाक पिािों के र्ंडारर् को िो महीने से कम की मात्रा िक सीनमि करने का ननिेश िे सकिा है।

(5) यनि नकसी र्ी कंटेनर में कोई खराबी आिी है नजसके पररर्ामस्वरूप नवर्ाि पिािय ननकलिे हैं, िो नवर्ाि पिािों को िुरंि स्टैंडबाय र्ंडारर् सुनवधा में स्िानांिररि

करने के नलए सबसे बडे कंटेनर के बराबर स्टैंडबाय व्यवस्िा हमेशा उपलब्ध रहेगी।

(6) फाइबर ग्लास प्रबनलि प्लानस्टक (एफआरपी), सर्ी कांच के बियन आनि जैसी गैर-धानत्वक सामग्री से नननमयि नकसी र्ी र्ंडारर् सुनवधा में सामग्री द्वारा लगाए गए

िनाव, यनि कोई हो, को झेलने के नलए पयायप्त िाकि होनी चानहए और उन्हें ठीक से नस्िर नकया जाना चानहए। ऐसी र्ंडारर् सुनवधा में उपयोग नकए जाने वाले कायय

प्लेटफॉमय, प्रवेश सीनढयाँ, पाइपलाइनें आनि र्ंडारर् सुनवधा की संरचना पर कोई आधार नहीं रखेंगे और स्विंत्र रूप से समनियि होंगे।

10. पृर्थक्करण सुभिधा - संयंत्र और उपकरर्ों का ननमायर् और रखरखाव इस प्रकार नकया जाएगा नक संयंत्र या संयंत्र के नकसी र्ाग या उपकरर् को उनचि संकेि के

साि शीघ्र पृिक्ट्करर् नकया जा सके। पृिक्ट्करर् सुनवधाओं को िशायने वाली लेआउट योजना की एक प्रनि सुरक्षा कनमयों, रखरखाव और स्वास््य एवं सुरक्षा कनमयों के

पास हमेशा उपलब्ध रहेगी और इन पृिक्ट्करर् सुनवधाओं की प्रर्ावशीलिा की जाँच महीने में एक बार की जाएगी।

11. व्यभक्तर्त सुरिा उपकरण -

(1) इस अनुसूची में शानमल प्रनियाओं में खिरों के संपकय में आने वाले सर्ी श्रनमकों को उपयुि और अनुमोनिि प्रकार के व्यनिगि सुरक्षा उपकरर् प्रिान नकए जाएँगे।

ऐसे उपकरर् जारी करने से पहले स्वच्छ, रोगार्ुरनहि और स्वास््यकर नस्िनि में होने चानहए।

(2) अनधर्ोगी, कायय करिे समय सर्ी श्रनमकों को व्यनिगि सुरक्षा उपकरर्ों के उपयोग के बारे में सूनचि, नशनक्षि और पययवेक्षर् करने की व्यवस्िा करेगा।

(3) नकसी र्ी व्यनिगि सुरक्षा उपकरर् की उपयुििा के संबंध में नकसी र्ी संिेह के संबंध में, मुख्य ननरीक्षक-सह-सुनवधाकिाय का ननर्य अंनिम होगा।

12. अिामग प्रणाभियाँ -

(1) श्रव्य और दृश्य संकेि िेने वाली उपयुि और प्रर्ावी अलामय प्रर्ानलयाँ, ननयंत्रर् कक्ष के साि-साि उन सर्ी रर्नीनिक स्िानों पर स्िानपि की जाएँगी जहाँ प्रनिया

ननयंत्रर् व्यवस्िाएँ उपलब्ध हैं िानक

पररचालन मापिंडों के पूवय ननधायररि सुरनक्षि स्िर से अनधक होने या आग लगने या नवस्फोट होने के नलए अनुकूल पररनस्िनियाँ उत्पन्न होने से पहले सुधारात्मक कारयवाई

की जा सके। ऐसी अलामय प्रर्ानलयों की प्रनिनिन जाँच की जाएगी और हर महीने कम से कम एक बार परीक्षर् नकया जाएगा िानक हर समय उनकी काययकुशलिा सुनननिि

की जा सके।

(2) मुख्य ननरीक्षक-सह-सुनवधाप्रिािा ऐसे संयंत्रों या प्रनियाओं के मामले में ऐसी प्रर्ाली स्िानपि करने का ननिेश िे सकिा है जहाँ नवर्ाि पिािों का उपयोग नकया

जा रहा हो और नजनके र्ू-ररसाव से संयंत्र में या उसके आसपास व्यापक नवर्ाििा फैल सकिी हो।

62

DELHI GAZETTE : EXTRAORDINARY

PART IV]

13. कायग िातािरण में पिार्थों के ररसाि पर भनयंत्रण –

(1) सर्ी संयंत्रों, कंटेनरों, पात्रों, सीवरों, नानलयों, ्लू, ननलकाओं, पुनलयों और िबे हुए पाइपों और उपकरर्ों में ऐसे पिािों के ररसाव और फैलाव को ननयंनत्रि करने

के नलए प्रर्ावी व्यवस्िाएँ जैसे घेरा, या बाईपास, या कुशल एग्जॉस्ट ड्रै्ट , नकारात्मक िबाव का रखरखाव आनि प्रिान की जाएँगी, नजनसे सामान्य कायय के िौरान और

िुघयटना या आपाि नस्िनि में आग लगने या नवस्फोट होने या नवर्ाि खिरों की आशंका हो सकिी है।

(2) ननयंत्रर् व्यवस्िा की नवफलिा के पररर्ामस्वरूप कायय वािावरर् में पिािों के ररसाव की नस्िनि में,

प्रनिया को इस प्रकार ननयंनत्रि करने के नलए ित्काल किम उठाए जाएंगे, नजससे आगे का ररसाव सुरनक्षि स्िर िक कम हो जाए।

(3) उप-अनुच्छेि (2) में अपेनक्षि ित्काल किम उठाए जाने से पहले कायय वािावरर् में ररसने वाले पिािों को वायु या जल या नकसी अन्य उपयुि कारक से िनुकृि

करके या पिािों का उपयुि उपचार करके अहाननकर बना निया जाएगा।

14. खतरनाक रासायभनक अभिभियाओं का भनयंत्रण - खिरनाक रासायननक अनर्नियाओं के प्रर्ावों को ननयंनत्रि करने के नलए स्वचानलि और/या ररमोट-कंरोल

व्यवस्िा जैसे उपयुि प्रावधान नकए जाएँगे। ननयंत्रर् व्यवस्िा के नवफल होने की नस्िनि में स्वचानलि ्लनडंग या ब्लैंकेनटंग या अन्य प्रर्ावी व्यवस्िाएँ लागू होंगी।

15. संयंत्र एिं उपकरणों का परीिण, जाँच और मरम्मत -

(1) प्रनिया में प्रयुि संयंत्र, उपकरर् और मशीनरी के सर्ी र्ागों, नजनकी नवफलिा की संर्ावना होने पर आपािकालीन नस्िनि उत्पन्न हो सकिी है, का परीक्षर् प्रनिया

शुरू करने से पहले एक सक्षम व्यनि द्वारा नकया जाएगा और िो वर्य के अंिराल पर या मरम्मि के बाि पुनिः परीक्षर् नकया जाएगा। सक्षम अनधकारी संयंत्र, उपकरर् और

मशीनरी के उन र्ागों की पहचान करेगा नजनका पूवोि रूप से परीक्षर् नकया जाना आवश्यक है और एक उपयुि परीक्षर् प्रनिया नवकनसि करेगा। िाब वानहकाओं या

प्रनिनिया वानहकाओं के संबंध में उपयुयि परीक्षर् करिे समय ननम्ननलनखि सावधाननयां बरिी जाएँगी, अिायि् –

(क) परीक्षर् से पहले, प्रत्येक पात्र को अच्छी िरह से साफ नकया जाएगा और बाहरी रूप से, ििा यिा संर्व, आंिररक रूप से र्ी सिही िोर्ों, जंग और बाहरी पिािों

के नलए जाँच की जाएगी। सफाई और कीचड (यनि कोई हो) को हटाने की प्रनिया के िौरान, आग या नवस्फोट से बचाव के नलए सर्ी आवश्यक सावधाननयां बरिी

जाएँगी, यनि ऐसा कीचड पायरोफोररक प्रकृनि का है या उसमें स्वििः ज्वलनशील रसायन हैं;

(ख) परीक्षर् पूरा होिे ही, पात्र को अंिर से पूरी िरह सुखाया जाएगा और उस पर स्पष्ट रूप से नचि और अंक अंनकि नकए जाएँगे, जो परीक्षर् करने वाले व्यनि और

परीक्षर् की निनि को िशायिे हों;

(ग) और कोई र्ी पात्र जो परीक्षर् में असफल हो जािा है या नकसी अन्य कारर् से उपयोग के नलए असुरनक्षि पाया जािा है, उसे मुख्य ननरीक्षक-सह-सुनवधाकिाय को

सूनचि करिे हुए नष्ट कर निया जाएगा या अनुपयोगी बना निया जाएगा।

(2) संयंत्र, उपकरर्, मशीनरी के सर्ी र्ागों, नजनकी नवफलिा की संर्ावना से आपािकालीन नस्िनि उत्पन्न हो सकिी है, की सक्षम अनधकारी द्वारा महीने में एक बार

जाँच की जाएगी।

(3) अनुच्छेि (1) और (2) में उनल्लनखि परीक्षर् और जाँच के अनर्लेख िब िक रखे जाएँगे जब िक संयंत्र, उपकरर् और मशीनरी का वह र्ाग उपयोग में है।

(4) संयंत्र, उपकरर् और मशीनरी में नकए जाने वाले पररवियन, संशोधन और पररवधयन सनहि सर्ी मरम्मि कायय एक नजम्मेिार व्यनि की िेखरेख में नकए जाएँगे, जो कायय

करने वाले व्यनियों की सुरक्षा और स्वास््य सुनननिि करने के नलए एक प्रनिया नवकनसि करेगा। जब पाइपलाइनों की मरम्मि या संशोधन नकया जािा है, और जोडों को

वेल्ड करना आवश्यक हो, िो जोडों की बट वेनल्डंग को प्रािनमकिा िी जाएगी। जहाँ र्ी आवश्यक हो, नजम्मेिार व्यनि उपरोि कायय को 'कायय करने की अनुमनि प्रर्ाली'

के माध्यम से नवननयनमि करेगा।

16. स्टेभजंर् -

(1) रखरखाव कायय या मरम्मि कायय या सीनमि स्िानों में प्रवेश से संबंनधि कायों के नलए और पररनशष्ट 'क' में शानमल प्रनियाओं में प्रयुि होने वाले सर्ी स्टेनजंग नस्िर,

दृढ और पयायप्त मज़बूिी वाली ठोस सामग्री से नननमयि होंगे। ऐसे स्टेनजंग संबंनधि र्ारिीय मानक नवननिेशों के अनुरूप होंगे।

[PART IV

DELHI GAZETTE : EXTRAORDINARY

63

(2) नकसी र्ी बंि या खुले पात्र पर स्टेनजंग िब िक नहीं लगाई जाएगी जब िक नक पात्र इस प्रकार नननमयि न हो और स्टेज पर काम करने वाले व्यनियों के संपकय में

आने से बचाने के नलए उसमें वेंनटलेशन की व्यवस्िा न हो।

(3) इस अनुच्छेि के प्रयोजन के नलए नननमयि सर्ी स्टेनजंग में उनचि पहुँच मागय होंगे जो सुरनक्षि हों और उनमें एक मीटर की ऊँचाई िक उनचि हैंड रेनलंग और टो बोडय

लगा होगा।

17. बैठने की व्यिस्र्था - पररनशष्ट 'क' में शानमल प्रनियाओं में काययरि प्रचालन कानमयकों के नलए प्रिान की गई बैठने की व्यवस्िा सुरनक्षि िरीके से की जाएगी िानक

ननमायर्, मरम्मि या रखरखाव के िौरान कायय वािावरर् में उत्पन्न होने वाले नवर्ैले, ज्वलनशील और नवस्फोटक पिािों के संपकय में आने के जोनखम को रोका जा सके,

जो या िो संयंत्र और उपकरर्ों की खराबी के कारर् या िबाव में पिािों के वायुमंडल में चले जाने के कारर् हो सकिे हैं।

18. सीभमत स्र्थानों में प्रिेश या कायग –

(1) प्रत्येक कारखाने का अनधर्ोगी, नजस पर इस अनुसूची के प्रावधान लागू होिे हैं, नकसी र्ी व्यनि को सीनमि स्िानों में प्रवेश करने या अंिर काम करने की अनुमनि

िेने से पहले ननम्ननलनखि सावधाननयों का पालन सुनननिि करेगा -

(क) सर्ी सीनमि स्िानों और ऐसे स्िानों में सामान्य या असामान्य रूप से आने वाले खिरों की प्रकृनि की पहचान करेगा, और सीनमि स्िानों में प्रवेश करने या अंिर

काम करने वाले व्यनियों की सुरक्षा और स्वास््य सुनननिि करने के नलए सबसे उपयुि सुरक्षा उपाय नवकनसि करने की व्यवस्िा करेगा;

(ख) सीनमि स्िानों के अंिर प्रवेश या कायय को 'कायय परनमट प्रर्ाली' के माध्यम से नवननयनमि करना, नजसमें उप-खंड (क) के अंिगयि अपेनक्षि सुरक्षा उपाय शानमल

होने चानहए;

(ग) सीनमि स्िान में प्रवेश या कायय के नलए परीक्षर् करने से पहले, उस स्िान को नननष्ट्ियकारी एजेंटों से धोकर या साफ करके सुरनक्षि बनाया जाएगा; या र्ाप या

अनिय गैसों से शुनिकरर् करके और पयायप्त कडी वेंनटलेशन व्यवस्िा करके या ऐसे उपाय करके जो सीनमि स्िान को सुरनक्षि बनाए;

(घ) नकसी सक्षम व्यनि द्वारा इस प्रयोजन के नलए आवश्यक परीक्षर् करवाने की व्यवस्िा करेगा और यह सुनननिि करेगा नक सीनमि स्िान व्यनियों के प्रवेश या कायय

के नलए सुरनक्षि है। कायय के िौरान इसकी ननरंिर सुरक्षा सुनननिि करने के नलए आवश्यकिानुसार परीक्षर् नकए जाएँगे;

(ङ) सीनमि स्िानों में कायय करने वाले कानमयकों को कायय में शानमल खिरों के बारे में नशनक्षि और प्रनशनक्षि करने की व्यवस्िा करेगा। वह बचाव, पुनरुत्िान और प्रािनमक

उपचार की व्यवस्िा सनहि उपयुि और अनुमोनिि व्यनिगि सुरक्षा उपकरर् र्ी िैयार रखेगा, और एक नजम्मेिार और जानकार व्यनि द्वारा हर समय कायय का पययवेक्षर्

करवाएगा।

(च) अनधर्ोगी को सीनमि स्िानों में प्रवेश या कायय का एक लॉग रखना होगा और इस ररकॉडय में कायय के नलए ननयुि व्यनियों का नववरर्, कायय का स्िान और ऐसे

अन्य नववरर् शानमल होंगे नजनका इस प्रकार रखी गई लॉग बुक पर प्रर्ाव पडेगा। इन्हें िब िक रखा जाएगा जब िक संबंनधि कमयचारी सेवा में हैं और मांगे जाने पर

ननरीक्षक-सह-सुनवधाप्रिािा को प्रस्िुि नकया जाएगा।

19. रखरखाि कायग आभि –

(1) संयंत्रों और उपकरर्ों के रखरखाव से संबंनधि सर्ी कायय, नजसमें इस अनुसूची में शानमल प्रनियाओं में उपयोग नकए जाने वाले खिरनाक पिािों वाले खाली कंटेनरों

की सफाई र्ी शानमल है, "कायय करने की अनुमनि प्रर्ाली" के िहि प्रनशनक्षि कनमयों को ननयुि करके और उनसे ननपटने के नलए आवश्यक खिरों और सावधाननयों

की जानकारी रखने वाले नजम्मेिार अनधकारी की िेखरेख में नकया जाएगा।

(2) रखरखाव कायय इस प्रकार नकया जाएगा नक आसपास के लोगों या वहां से गुजरने वाले लोगों को कोई खिरा न हो।

20. कायग करने की अनुमभत प्रणािी - कायय करने की अनुमनि प्रर्ाली में अन्य बािों के साि-साि कायय करने की अनुमनि प्रर्ाली के अधीन नकसी र्ी नननियष्ट कायय

64

DELHI GAZETTE : EXTRAORDINARY

PART IV]

को करिे समय ननम्ननलनखि सावधाननयों का पालन शानमल होगा -

(क) कायय करने की अनुमनि प्रर्ाली के अधीन सर्ी कायय एक जानकार और नजम्मेिार व्यनि की िेखरेख में नकए जाएँगे;

(ख) संयंत्र या मशीनरी या उपकरर् के सर्ी र्ाग, नजन पर कायय करने की अनुमनि प्रिान की जािी है, वे कायय करने की अनुमनि की अवनध के िौरान अन्य र्ागों से

अलग-िलग रहेंगे और संयंत्र, मशीनरी के र्ागों सनहि काययस्िल को सफाई, शुनिकरर्, धुलाई आनि द्वारा सुरनक्षि बनाया जाएगा;

(ग) कायय करने की अनुमनि प्रर्ाली के अधीन सर्ी कायों में पूवयननधायररि कायय प्रनियाएँ होंगी जो सुरक्षा को कायय के साि एकीकृि करिी हैं। जब र्ी सामग्री या उपकरर्

में कोई पररवियन होिा है, िो ऐसी प्रनियाओं की समीक्षा की जाएगी िानक ननरंिर सुरक्षा सुनननिि की जा सके;

(घ) कायय करने की अनुमनि प्रर्ाली को पूरा करने के नलए ननयुि व्यनियों को सीनमि स्िान में प्रवेश करने से पहले कायय की माँगों और प्रकृनि को ध्यान में रखिे हुए

सर्ी प्रकार से शारीररक रूप से स्वस्ि होना चानहए। ऐसे व्यनि को कायय करने की सही प्रनियाओं के साि-साि कायय करने की अनुमनि प्रर्ाली के कायायन्वयन के िौरान

बरिी जाने वाली सावधाननयों के बारे में पयायप्त जानकारी िी जाएगी;

(ङ) जहां र्ी आवश्यक समझा जाए, पयायप्त बचाव व्यवस्िा की जाएगी और कायय करने की अनुमनि प्रर्ाली के कायायन्वयन के िौरान आपाि नस्िनि में उपयोग के नलए

काययस्िल के पास पयायप्त प्रािनमक नचनकत्सा, बचाव और पुनरुत्िान व्यवस्िा अच्छी काययशील नस्िनि में उपलब्ध होगी;

(च) 'कायय करने की अनुमनि प्रर्ाली' के कायायन्वयन के िौरान उपयुि और अनुमोनिि व्यनिगि सुरक्षा उपकरर्ों का उपयोग नकया जाएगा;

(छ) 'कायय करने की अनुमनि प्रर्ाली' के अधीन कायय पूरा होने के बाि, नजम्मेिार व्यनि सर्ी उपकरर्ों और औजारों को हटाकर उन्हें मूल नस्िनि में बहाल करेगा िानक

ननयनमि प्रनिया के िौरान नकसी र्ी खिरे को रोका जा सके।

21. सुरिा नमूनाकरण काभमगक - अनधर्ोगी, नमूने एकत्र करने के नलए ननयुि व्यनियों को सुरनक्षि प्रनियाओं के बारे में ननिेश िेकर उनकी सुरक्षा सुनननिि करेगा।

ऐसे कनमयों को, यनि आवश्यक हो, उनचि और अनुमोनिि व्यनिगि सुरक्षा उपकरर् प्रिान नकए जाएँगे।

22. िेंभटिेशन - प्रनिया क्षेत्र में, जहाँ खिरनाक या नवर्ाि या ज्वलनशील या नवस्फोटक पिािय उत्पन्न हो सकिे हैं, हर समय पयायप्त वेंनटलेशन व्यवस्िा प्रिान की

जाएगी और उसे बनाए रखा जाएगा। ये व्यवस्िाएँ यह सुनननिि करेंगी नक कायय वािावरर् में हाननकारक या नवस्फोट का कारर् बनने वाले पिािों की सांद्रिा जमा न होने

िी जाए।

23. आपात भस्र्थभतयों से भनपटने की प्रभियाएँ -

(1) पररनशष्ट 'क' में शानमल कायों को करने वाले प्रत्येक कारखाने का अनधर्ोगी, कायय के िौरान या रखरखाव या मरम्मि कायय करिे समय उत्पन्न होने वाली सर्ी प्रकार

की संर्ानवि आपाि नस्िनियों की पहचान करने की व्यवस्िा करेगा। इस प्रकार पहचानी गई आपाि नस्िनियों की

हर वर्य समीक्षा की जाएगी।

(2) अनधर्ोगी ऐसी सर्ी पहचानी गई आपाि नस्िनियों से ननपटने के नलए एक नवस्िृि योजना िैयार करेगा, नजसमें बचाव के नलए बाहरी सहायिा बुलाने की व्यवस्िा

और ित्काल नचनकत्सा सुनवधाएँ उपलब्ध कराने के नलए अनग्नशमन व्यवस्िा शानमल होगी।

(3) अनधर्ोगी आपाि नस्िनियों की सूची और आपाि नस्िनियों से ननपटने के नलए बनाई गई प्रनियाओं और योजनाओं का नववरर् मुख्य ननरीक्षक-सह-सुनवधाकिाय को

र्ेजेगा।

(4) अनधर्ोगी, संयंत्र के अंिर सर्ी व्यनियों के साि-साि आस-पास के समुिाय को, यनि आवश्यक हो, सावधान करने के नलए नवनशष्ट और पहचानने योग्य चेिावनी

व्यवस्िाएँ स्िानपि करने की व्यवस्िा करेगा, िानक लोगों को बाहर ननकाला जा सके और आपािकालीन कियव्यों को सौंपे गए व्यनियों द्वारा आपािकालीन प्रनियाओं

का पालन नकया जा सके। सर्ी संबंनधिों को चेिावनी व्यवस्िाओं और उनके अिय के बारे में अच्छी िरह से जानकारी होनी चानहए। इन व्यवस्िाओं की प्रर्ावशीलिा की

जाँच हर महीने की जानी चानहए।

(5) वैकनल्पक नवद्युि आपूनिय व्यवस्िाएँ बनाई जाएँगी और उन्हें सामान्य नवद्युि आपूनिय प्रर्ाली के साि जोडा जाएगा िानक इस अनुसूची के र्ाग II, र्ाग III, र्ाग

IV और र्ाग V के अनुच्छेि 10, 11, 12, 13, 14, 18, 22 और इस अनुच्छेि की आवश्यकिाओं के अनुपालन हेिु सुनवधाओं और उपकरर्ों को ननरंिर

[PART IV

DELHI GAZETTE : EXTRAORDINARY

65

नवद्युि आपूनिय सुनननिि की जा सके।

(6) अनधर्ोगी उस स्िान पर आगे की प्रनिया कायय को स्िनगि करने की व्यवस्िा करेगा जहाँ आपाि नस्िनि स्िानपि हो और उस क्षेत्र में आपािकालीन ड्यूटी पर िैनाि

श्रनमकों को छोडकर सर्ी व्यनियों को िुरंि बाहर ननकाल िेगा।

(7) कारखाने के सर्ी कमयचाररयों को आपाि नस्िनि के िौरान ननकासी प्रनियाओं सनहि उनके द्वारा की जाने वाली कारयवाई के बारे में प्रनशनक्षि नकया जाएगा।

(8) सर्ी आपािकालीन प्रनियाओं का हर िीन महीने में पूवायभ्यास नकया जाना चानहए और उद्देश्यों की प्रानप्त में यनि कोई कमी हो, िो उसे उनचि रूप से ठीक नकया

जाएगा।

(9) अनधर्ोगी को िस प्रनिशि कमयचाररयों को प्रािनमक उपचार अनग्नशामक उपकरर्ों के उपयोग और

नवशेर् प्रनिया के नवनशष्ट खिरों के प्रनिपािन में प्रनशनक्षि करने की व्यवस्िा करनी होगी।

(10) अनधर्ोगी अनुरोध नकए जाने पर उपचार करने वाले नचनकत्सक को खिरनाक पिािय की नवनशष्ट रासायननक पहचान िुरंि उपलब्ध कराएगा, जहाँ उजागर व्यनियों

को उनचि आपािकालीन या प्रािनमक उपचार प्रिान करने के नलए जानकारी की आवश्यकिा हो।

24. अपभशष्टों के कारण खतरा

(1) नवनर्न्न प्रनियाओं और कायों से ननकलने वाले अपनशष्टों के नमश्रर् को रोकने के नलए पयायप्त सावधाननयां बरिी जाएँगी, नजससे खिरनाक या जहरीली गैसें ननकल

सकिी हैं।

(2) नजन अपनशष्टों में अन्य अपनशष्टों की उपनस्िनि में जहरीली गैसें होिी हैं या उत्पन्न होिी हैं, उनके नलए स्विंत्र जल ननकासी प्रर्ानलयाँ उपलब्ध कराई जाएँगी िानक

यह सुनननिि नकया जा सके नक उन्हें रोका जा सके और सुरनक्षि बनाया जा सके।

…………………………….

िार् III

अभग्न एिं भिस्फोट जोभखम

1. प्रज्ििन के स्रोत, भजनमें प्रकाश व्यिस्र्था िी शाभमि है-

(1) कोई र्ी आंिररक िहन इंजन, कोई र्ी नवद्युि मोटर या अन्य नवद्युि उपकरर्, और ऐसी नफनटंग एवं नफक्ट्स्चर जो नचंगारी उत्पन्न कर सकें या अन्यिा िहन का कारर्

बन सकें, या प्रज्वलन का कोई अन्य स्रोि या नकसी र्ी खुले प्रकाश की व्यवस्िा नहीं की जाएगी या उसे ऐसे प्रनिया क्षेत्र में स्िानपि करने की अनुमनि नहीं होगी जहाँ

आग और नवस्फोट का खिरा हो सकिा है।

(2) सर्ी गमय ननकास पाइप र्वन के बाहर स्िानपि नकए जाएँगे और अन्य गमय पाइप या गमय सिह या गमय होने की संर्ावना वाली सिहों को उपयुि रूप से संरनक्षि

नकया जाएगा।

(3) कायय क्षेत्रों का वगीकरर्, उनके संर्ानवि खिरे की दृनष्ट से और नवद्युि उपकरर्ों या अन्य उपकरर्ों का चयन जो प्रज्वलन का स्रोि बन सकिे हैं, संबंनधि र्ारिीय

मानक के अनुसार नकया जाएगा।

(4) जहाँ ज्वलनशील वािावरर् का व्याप्त होना मुमनकन है या हो सकिा है, वहाँ श्रनमकों द्वारा पहने जाने वाले जूिों के िलवों पर कोई धािु नहीं होनी चानहए, और रकों

या कन्वेयर के पनहये सुचालक प्रकार के होने चानहए।

(5) इस क्षेत्र में कायय के नलए प्रयुि सर्ी उपकरर् और यंत्र नचंगारी रनहि होने चानहए।

66

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(6) उन प्रनिया क्षेत्रों में धूम्रपान नननर्ि होगा जहाँ आग और नवस्फोट का खिरा हो, और कारखाने में अनधकांश श्रनमकों द्वारा समझी जाने वाली र्ार्ा में, नननियष्ट क्षेत्रों

में धूम्रपान करने पर प्रनिबंध के बारे में चेिावनी नोनटस लगाए जाएँगे।

2. स्र्थैभतक भिद्युत –

(1) सर्ी मशीनरी और संयंत्र, नवशेर् रूप से पाइप लाइनें और बेल्ट ड्राइव, नजन पर स्िैनिक आवेश जमा होने की संर्ावना है, प्रर्ावी रूप से र्ू-संपनकयि नकए जाएँगे।

ज्वलनशील द्रव्यों के नलए ग्राही, स्िैनिक आवेशों के जमाव को रोकने के नलए र्ू-संपनकयि आपूनिय टैंकों से धािु के कनेक्ट्शन से जुडे होंगे। जहाँ आवश्यक हो, आद्रयिा को

ननयंनत्रि नकया जाएगा।

(2) मोबाइल टैंकर वैगनों को र्रने और उिारने के िौरान र्ू-संपनकयि नकया जाएगा, और यह सुनननिि करने के नलए सावधानी बरिी जाएगी नक इन्हें र्रने या उिारने से

पहले र्ू-संपकयन प्रर्ावी हो।

3. भबजिी से सुरिा - जहाँ आवश्यक हो, नबजली से सुरक्षा प्रर्ाली लगाई जाएगी और उसका रखरखाव नकया जाएगा।

4. प्रभिया तापन - आग और नवस्फोट की संर्ावना वाली प्रनिया के नलए ऊष्ट्मा प्रिान करने की नवनध यिासंर्व सुरनक्षि होनी चानहए और जहाँ खुली लौ का उपयोग

आवश्यक हो, वहाँ संयंत्र का ननमायर् इस प्रकार नकया जाना चानहए नक नकसी र्ी ज्वलनशील गैस, वाष्ट्प या धूल को लौ, या ननकास गैसों, या आग की संर्ावना वाले

अन्य स्रोिों के संपकय में आने से रोका जा सके। जहाँ िक संर्व हो, िापन व्यवस्िा को खिरे के िापमान से नीचे, पूवय-ननधायररि िापमान पर स्वचानलि रूप से ननयंनत्रि

नकया जाना चानहए।

5. ज्ििनशीि द्रव्यों का ररसाि –

(1) ज्वलनशील द्रव्यों से युि र्ंडारर् पात्रों से संर्ानवि ररसाव को बांध की िीवारों, िटबंधों, नाबिानों आनि के माध्यम से सीनमि रखने का प्रावधान नकया जाएगा।

(2) ज्वलनशील पिािों के संपकय में आने वाले अपनशष्ट पिािों का ननपटान जानकार और नजम्मेिार व्यनि की िेखरेख में उनचि रूप से नकया जाएगा।

(3) ऐसे पात्रों के आसपास पयायप्त और उपयुि अनग्नशमन उपकरर् लगाए जाएँगे।

6. सुरिा िाल्ि - प्रत्येक नस्िर और प्रत्येक बंि पात्र नजसमें गैस ननकलिी है या नजसमें गैस प्रवानहि होिी है, और नजसका िाब वायुमंडलीय िाब से ऊपर उठने की

आशंका होिी है, उसमें एक िाबमापी और िाब को कम करने के नलए एक उनचि सुरक्षा वाल्व या समान रूप से कुशल अन्य साधन लगे होंगे। इन उपकरर्ों को अच्छी

नस्िनि में रखा जाएगा।

7. पाइप िाइन आभि की स्र्थापना - ज्वलनशील या नवस्फोटक पिािों को ले जाने वाली सर्ी पाइपलाइनों को यांनत्रक क्षनि से सुरनक्षि रखा जाएगा और नकसी र्ी

प्रकार की नगरावट या िोर्, या ज्वलनशील या नवस्फोटक पिािों के संचय का पिा लगाने के नलए सप्ताह में एक बार एक नजम्मेिार व्यनि द्वारा उनकी जाँच की जाएगी,

और पाए गए नकसी र्ी िोर् ििा की गई मरम्मि का ररकॉडय रखा जाएगा।

8. अभग्नशमन प्रणाभियाँ –

(1) प्रत्येक कारखाना नजसमें 250 या इससे अनधक व्यनि काययरि हैं और जो पररनशष्ट ’क’ में सूचीबि प्रनियाओं को पूरा करिा है, उसे –

(क) प्रनशनक्षि और नजम्मेिार अनग्नशमन िस्िा उपलब्ध कराना होगा िानक आग या नकसी अन्य आपाि नस्िनि में अनग्नशमन और जीवन रक्षक उपकरर्ों का प्रर्ावी ढंग

से संचालन नकया जा सके। इस िस्िे में व्यनियों की संख्या अननवायय रूप से शानमल जोनखम के आकार पर ननर्यर करेगी, लेनकन नकसी र्ी नस्िनि में नकसी र्ी समय

उपलब्ध ऐसे प्रनशनक्षि व्यनियों की संख्या 8 से कम नहीं होगी। िस्िे में ननगरानी और वाडय कमी, अनग्नशमन पंप कमी और अनग्नशमन एवं आपािकालीन सेवाओं के

संचालन में प्रनशनक्षि नवर्ागीय पययवेक्षक और ऑपरेटर शानमल होंगे

।

(ख) िस्िे के प्रमुखों को अनधमानििः नकसी मान्यिा प्राप्त सरकारी संस्िान में प्रनशनक्षि नकया जाएगा और पररसर में आवास प्रिान करके उनकी उपयोनगिा बढाई जाएगी।

(ग) िस्िे के कनमयों को हेलमेट, जूिे और बेल्ट सनहि कपडे और उपकरर् प्रिान नकए जाएँगे।

(2) िस्िे के प्रत्येक सिस्य को आवंनटि कियव्यों को िशायने वाला एक मस्टर रोल िैयार नकया जाएगा ििा उसकी प्रनियाँ प्रत्येक प्रमुख को िी जाएँगी और साि ही प्रमुख

[PART IV

DELHI GAZETTE : EXTRAORDINARY

67

स्िानों पर प्रिनशयि की जाएँगी िानक आपाि नस्िनि में संिर्य के नलए आसानी से उपलब्ध हो सकें।

(3) पंपमैन को सर्ी उपकरर्ों के स्िान की पूरी जानकारी होनी चानहए। वह सर्ी अनग्नशमन उपकरर्ों को उनचि रूप से काययशील नस्िनि में बनाए रखने के नलए नजम्मेिार

होगा। उसके ध्यान में आने वाली कोई र्ी खराबी िुरंि िस्िे के प्रमुख के ध्यान में लाई जानी चानहए।

(4) जहाँ िक संर्व हो, कारखाने के मुख्य द्वार और अनग्नशमन पंप कक्ष को सर्ी नवननमायर् या र्ंडारर् क्षेत्रों से टेलीफोन लाइन के माध्यम से जोडा जाना चानहए और

ऐसे क्षेत्रों के ननकट सुनवधाजनक स्िान पर रखा जाना चानहए।

....................................

िार् IV

भिषाक्त पिार्थों के जोभखम

1. ररसाि -

(1) सर्ी संयंत्रों का नडजाइन और ननमायर् इस प्रकार नकया जाएगा नक नवर्ाि पिािों का ररसाव रोका जा सके। जहाँ आवश्यक हो, प्रनिया के खिरनाक चरर्ों के नलए

अलग र्वन, कमरे या सुरक्षात्मक संरचनाएँ उपयोग की जाएँगी और र्वनों का नडजाइन इस प्रकार िैयार नकया जाएगा नक नवर्ाि पिािों का ररसाव स्िानीय स्िर पर होने

से बचा जा सके।

(2) ऐसे ररसावों के गंर्ीर प्रर्ावों को रोकने के नलए कैच नपट, बाँध की िीवारें, िटबंध या अन्य उपयुि सुरक्षा उपाय प्रिान नकए जाएँगे। जहाँ ऐसे ररसाव से रखरखाव

और अन्य कमयचाररयों को खिरा हो वहाँ कैच नपट, पाइपलाइनों में जोडों के नीचे बनाए जाएँगे।

2. जि भनकासी - पयायप्त जल ननकासी की व्यवस्िा की जाएगी और यह इस उद्देश्य के नलए नवशेर् रूप से प्रिान नकए गए संग्रहर् टैंकों िक जाएगी, जहाँ हाननकारक

पिािों को सावयजननक नानलयों या सीवरों में छोडने से पहले उन्हें नननष्ट्िय, उपचाररि या अन्यिा सुरनक्षि बनाया जाएगा।

3. पात्रों का आच्‍छािन–

(1) प्रत्येक नस्िर पात्र या संरचना, नजसमें कोई नवर्ाि पिािय हो और जो र्ली-र्ांनि ढका न हो और नजससे नकसी श्रनमक के शरीर के नकसी र्ाग के आकनस्मक संपकय

में आने के सर्ी जोनखम उनचि िरीके से समाप्त न नकए गए हों, उसका ननमायर् इस प्रकार नकया जाएगा नक शारीररक संपकय से बचा जा सके।

(2) नकसी र्ी पात्र को आसपास की जमीन या प्लेटफॉमय से कम से कम 90 सेंटीमीटर की ऊँचाई पर सुरनक्षि रूप से बाड लगाकर सुरनक्षि नकया जाना चानहए, जब िक

नक उसका नकनारा पहले से ही उस जमीन या प्लेटफॉमय से कम से कम 90 सेंटीमीटर ऊपर न हो।

(3) जहाँ ऐसी पात्र एक-िूसरे से सटे हुए हों और उनके बीच का स्िान, नकसी र्ी आसपास की ईंट या अन्य ननमायर् सामग्री से मुि हो, या िो 45 सेंटीमीटर से कम

चौडा हो या 45 या अनधक सेंटीमीटर चौडा हो, लेनकन िोनों िरफ कम से कम 90 सेंटीमीटर की ऊँचाई िक र्ली-र्ांनि बाड लगाकर सुरनक्षि न नकया गया हो, वहाँ

सुरनक्षि अवरोध इस प्रकार लगाए जाएँगे नक उनके बीच आवागमन को रोका जा सकेिः

परन्‍िु यह उपबंनधि है नक इस अनुच्छेि के 10वें पैराग्राफ का उप-पैराग्राफ (2) ननम्ननलनखि पर लागू नहीं होगा -

(क) अमोननया सल्फेट के ननमायर् में प्रयुि संिृप्तक (सेच्‍युरेटसय); और

(ख) नमकीन पानी को वानष्ट्पि करने वाले पात्रों के नकनारों का वह र्ाग नजसे रेनकंग, ड्राइंग या र्रने की वश्यकिा होिी है। ।

4. सतत भनकास व्यिस्र्था –

(1) नवर्ाि वाष्ट्प, गैस, धुआँ और पिािय उत्पन्न करने वाली नकसी र्ी प्रनिया में कुशल सिि ननकास ढांचा होना चानहए। ऐसी व्यवस्िा को जहाँ िक संर्व हो, प्रनिया

ननयंत्रर् में इंटरलॉक नकया जाना चानहए।

(2) सिि ननकास व्यवस्िा के नवफल होने की नस्िनि में, प्रनिया को स्वचानलि रूप से रोकने के साधन उपलब्ध कराए जाने चानहए।

68

DELHI GAZETTE : EXTRAORDINARY

PART IV]

5. कायग बेंच - नवर्ाि पिािों के हेरफेर से संबंनधि प्रनियाओं में उपयोग नकए जाने वाले सर्ी कायय बेंचों को उनचि रूप से वगीकृि नकया जाएगा और उनकी सिह

नचकनी ििा अपारगम्य होगी, नजसे कायय पूरा होने के बाि प्रनिनिन धोया जाएगा।

6. अपभशष्ट भनपटान –

(1) नवर्ाि पिािों से सने अपनशष्ट के नलए एक अवशोर्क, कसकर ढके हुए पात्र का उपयोग करना आवश्यक है। अपनशष्ट की सामग्री को नकसी नजम्मेिार व्यनि की

िेखरेख में जलाकर या अन्य सुरनक्षि िरीकों से नष्ट नकया जाना चानहए।

(2) ननमायर् के िौरान, जब र्ी नवर्ाििा वाले नकसी बैच या मध्यविी उत्पाि को गुर्वत्ता के आधार पर अस्वीकार नकया जािा है, िो ननपटान से पहले उन्हें अहाननकर

बनाने या अन्यिा उपचाररि करने या नननष्ट्िय करने के नलए पयायप्त सावधाननयां बरिी जाएंगी।

(4) नवर्ाि पिािों के खाली कंटेनरों को ननपटान से पहले नकसी नजम्मेिार व्यनि की िेखरेख में अच्छी िरह से साफ नकया जाएगा।

………………………….

िार् V

भिशेष प्रािधान

1. नाइरो या अमीनो प्रभियाओं के भिए भिशेष सािधाभनयाँ -

(1) जब िक निस्टलीकृि इंरो या अमीनो पिािय या उसके नकसी द्रव्य को पूरी िरह से बंि प्रनिया में िोडा या नहलाया न जाए िानक धूल या धुआँ न उठे, ऐसी प्रनिया

को कुशल एग्जॉस्ट ड्रै्ट के िहि या नकसी अन्य उपयुि साधन को अपनाकर इस प्रकार चलाया जाएगा नक कायय वािावरर् में धूल या धुआँ न फैल सके।

(2) संयंत्र या उपकरर् या औजारों का कोई र्ी र्ाग जो नाइरो या अमीनो यौनगकों के संपकय में िा, उसकी मरम्मि या संचालन िब िक नहीं नकया जाएगा जब िक नक

उसे खाली, पूरी िरह से साफ और संिूनर्ि न कर निया जाए।

(3) नाइरो या अमीनो यौनगकों से कंटेनरों को केवल र्ौनिक संपकय से बचने के नलए उपयुि स्कूप का उपयोग करके ही र्रा जाएगा और र्ण्डार में कंटेनरों को इस प्रकार

सुखाया जाएगा नक स्टोव से ननकलने वाली गमय और िूनर्ि हवा कायय कक्ष में न जाए।

(4) नाइरो या अमीनो यौनगकों या उसके कच्चे माल वाले नकसी र्ी वैसेल में या उसके आसपास र्ाप िेने की प्रनियाएँ इस प्रकार की जाएँगी नक र्ाप या वाष्ट्प को कायय

वािावरर् में वापस जाने से प्रर्ावी रूप से रोका जा सके।

(5) नाइरो या अमीनो यौनगकों से नवर्ाििा से संबंनधि आपाि नस्िनि के िौरान उपयोग के नलए मेनिलीन ब्लू इंजेक्ट्शन जैसे उपयुि एंटीडॉट्स हमेशा नननियष्ट काययस्िलों

पर उपलब्ध रहेंगे।

2. िोम प्रभियाओं के भिए भिशेष सािधाभनयाँ –

(1) िोम प्रनियाओं में कच्चे माल की नपसाई और छनाई ऐसी रीनि से और ऐसी नस्िनि में की जाएगी नजससे नक अन्य प्रनियाओं से प्रर्ावी पृिक्ट्करर् सुनननिि हो

सके और यह कुशल एग्जॉस्ट ड्रै्ट के अंिगयि हो।

(2) उन स्िानों के बहुि ननकट धुलाई सुनवधाएँ नस्िि होंगी जहाँ ननक्षालन, अम्लीकरर्, सल्फेट ननक्षेपर्, वाष्ट्पीकरर्, निस्टलीकरर्, अपकेंद्रर् या पैनकंग जैसी वैट िोम

प्रनियाएँ की जािी हैं, िानक शरीर के प्रर्ानवि र्ागों को बहिे पानी से शीघ्र धोया जा सके।

(3) िोम प्रनिया में काययरि सर्ी व्यनियों के हािों और पैरों का साप्तानहक ननरीक्षर् एक योग्य नसय द्वारा नकया जाएगा और ऐसे ननरीक्षर्ों का ररकॉडय मुख्य ननरीक्षक-

सह-सुनवधा प्रिािा द्वारा अनुमोनिि प्रपत्र में रखा जाएगा।

(4) काययस्िल पर नग्लसरीन, वैसलीन आनि जैसे उपयुि मरहम और जलरोधी प्लास्टर हमेशा एक अलग नडब्बे में उपलब्ध रहेंगे जो श्रनमकों के नलए आसानी से सुलर्

हों िानक नानसका पट के नछद्रर् से बचाव हो सके।

3. काँच के सिी पात्रों में की जाने िािी प्रभियाओं के भिए भिशेष सािधाभनयाँ –

[PART IV

DELHI GAZETTE : EXTRAORDINARY

69

(1) नवनाइल क्ट्लोराइड, बेंजाइल क्ट्लोराइड आनि के ननमायर् जैसी प्रनियाएँ और रासायननक अनर्नियाएँ, नजन्हें सर्ी काँच के पात्रों में नकया जाना आवश्यक है, उनके

नलए उपयुि साधन जैसे नक ठोस िार की जाली का आवरर् होना चानहए िानक काँच के पात्र के टूटने की नस्िनि में आस-पास काम कर रहे व्यनियों की सुरक्षा हो सके।

(2) टूटने के कारर् पूर्यििः काँच के पात्र से वाष्ट्प का ररसाव या उत्सजयन, उपयुि साधनों, जैसे जल या उपयुि नवलायकों के साि नवलयन द्वारा िुरंि नननष्ट्िय कर निया

जाएगा या अहाननकर बना निया जाएगा िानक आग, नवस्फोट या स्वास््य संबंधी खिरों से बचा जा सके।

4. क्िोरेट भिभनमागण से संबंभधत प्रभियाओं के भिए भिशेष सािधाभनयां –

(1) क्ट्लोरेट का निस्टलीकरर्, नपसाई या पैनकंग,, नकसी अन्य प्रयोजन के नलए उपयोग नकए जाने वाले स्िान पर नहीं नकया जाएगा और ऐसे स्िानों की सिह कठोर,

नचकनी और अप्रर्ानवि होनी चानहए जो गैर-ज्वलनशील पिािय से बनी हो। उस स्िान की प्रनिनिन अच्छी िरह सफाई की जाएगी।

(2) क्ट्लोरेट श्रनमकों के नलए उपलब्ध कराए गए व्यनिगि सुरक्षा उपकरर् जैसे ओवरऑल आनि काययस्िल से नहीं हटाए जाएँगे और उन्हें प्रनिनिन अच्छी िरह से साफ

नकया जाएगा।

(3) अनग्न आपाि नस्िनि के िौरान उपयोग के नलए क्ट्लोरेट प्रनिया स्िल के पास पयायप्त मात्रा में पानी उपलब्ध होना चानहए।

(4) क्ट्लोरेट के निस्टलीकरर् या निस्टलीकृि ग्राउंड क्ट्लोरेट को रखने के नलए लकडी के पात्रों का उपयोग नहीं नकया जाएगा।

5. प्रबभित प्िाभस्टक से बने संयंत्र और उपकरणों के उपयोर् में भिशेष सािधाभनयां -

(1) सर्ी संयंत्र और उपकरर् उपयुि र्ारिीय या नकसी अन्य राष्ट्रीय मानक के अनुरूप होंगे।

(2) आकनस्मक क्षनि से बचने के नलए संयंत्र और उपकरर्ों के र्ंडारर्, पररवहन, संचालन और स्िापना के िौरान सावधानी बरिी जाएगी।

(3) सर्ी संयंत्र और उपकरर् इस प्रकार स्िानपि नकए जाएँगे नक लोड, नडजाइन के अनुसार या नवननमायिा की नसफाररशों के अनुसार नविररि हों।

(4) सर्ी पाइप कायय को इस प्रकार नकया जाएगा नक पात्रों या टैंक पर शाखाओं के स्िानीय कुल लोड उनकी नडजाइन वैल्यू से अनधक न हो।

(5) स्िापना के बाि, सर्ी संयंत्रों और उपकरर्ों का िाब परीक्षर् नकया जाएगा और उसके बाि नकसी सक्षम व्यनि द्वारा गहन जाँच की जाएगी। परीक्षर् और जाँच

संबंनधि मानकों के अनुसार की जाएगी। परीक्षर् और नकसी सक्षम व्यनि द्वारा जाँच का प्रमार् पत्र प्राप्त नकया जाएगा और काययस्िल पर उपलब्ध रखा जाएगा।

(6) सर्ी संयंत्रों और उपकरर्ों का समय-समय पर परीक्षर् ििा जाँच की जाएगी और इस अनुसूची के र्ाग-2 के अनुच्छेि 15 के अनुसार उनका ररकॉडय रखा जाएगा।

(7) संयंत्र और उपकरर्ों को उनके उपयोग के िौरान ननधायररि क्षमिा से अनधक र्रा या ओवरलोड नहीं नकया जाएगा।

िार् VI

भचभकत्सा आिश्यकताएँ

1. पररशोधन सुभिधाएँ - उन सर्ी स्िानों पर जहाँ पररनशष्ट ’क’ में सूचीबि प्रनियाओं में नवर्ाि पिािों का उपयोग नकया जािा है, आपाि नस्िनि से ननपटने के नलए

ननम्ननलनखि प्रावधान नकए जाएँगेिः

(क) प्रािनमक नचनकत्सा बॉक्ट्स नजसमें सर्ी आवश्यक सामान हो;

(ख) ऐसे नवर्ाि और संक्षारक पिािों से िूनर्ि व्यनियों, उनके शरीर के अंगों और कपडों को पानी में डालने के नलए आसानी से सुलर् साधन, और ऐसे साधन नीचे

िी गई िानलका में िशायए अनुसार होंगेिः-

नकसी र्ी काययरि व्यनियों की संख्या

ड्रेंनचंग शोवर की संख्‍या

70

DELHI GAZETTE : EXTRAORDINARY

PART IV]

50 व्यनियों िक

2

51 से 100 के बीच

3

101 से 200

3 + ित्पिाि प्रत्येक 50 व्यनियों के नलए 1

201 से 400

5 + ित्पिाि प्रत्येक 100 व्यनियों के नलए 1

401 से 700

7 + ित्पिाि प्रत्येक 200 व्यनियों के नलए 1

(ग) आसुि जल या उपयुि द्रव्य से र्री पयायप्त संख्या में नेत्र धोने की बोिलें, सुनवधाजनक रूप से रखे गए बक्ट्सों या अलमाररयों में रखी जाएँगी और एक नवनशष्ट नचि

द्वारा स्पष्ट रूप से नचनिि की जाएँगी जो हर समय निखाई िे।

2. व्यािसाभयक स्िास््य केंद्र - पररनशष्ट ’क’ में शानमल प्रनियाओं को नियानन्वि करने वाले सर्ी कारखानों में, नीचे निए गए पैमाने के अनुसार सुनवधाओं सनहि

एक व्यावसानयक स्वास््य केंद्र उपलब्ध कराया जाएगा और उसे सुव्यवनस्िि रूप से बनाए रखा जाएगा।

(1) पचास िभमकों तक को रोजर्ार िेने िािे कारखानों के भिए –

(क) आपाि नस्िनि में नचनकत्सा सहायिा प्राप्त करने के नलए कारखाने के ननकट नस्िि अपने अनधसूनचि नक्ट्लननक में एक योग्य नचनकत्सक, नजसे आगे कारखाना नचनकत्सा

अनधकारी कहा जाएगा, की सेवाएँ, जो ररटेनरनशप आधार पर उपलब्ध होंगी। वह इस र्ाग के पैराग्राफ 4 में ननधायररि अनुसार पूवय-ननयोजन और आवनधक नचनकत्सा

जाँच र्ी करेगा।

(ख) प्रािनमक नचनकत्सा प्रनियाओं में प्रनशनक्षि कम से कम पाँच व्यनि, नजनमें से कम से कम एक व्यनि कायय अवनध के िौरान हमेशा उपलब्ध रहेगा।

(ग) पूरी िरह सुसनज्जि एक प्रािनमक नचनकत्सा बॉक्ट्स।

(2) 51 से 200 िभमकों को रोजर्ार िेने िािे कारखानों के भिए –

(क) व्यावसानयक स्वास््य केंद्र में न्यूनिम 15 वगय मीटर क्षेत्रफल वाला एक कमरा होगा, नजसके फशय और िीवारें नचकनी, कठोर और अप्रर्ानवि सिह की होंगी और

पयायप्त रूप से प्रकाशयुि, हवािार ििा सुसनज्जि होंगी।

(ख) एक अंशकानलक नचनकत्सा अनधकारी इस केंद्र का संपूर्य प्रर्ारी होगा, जो सप्ताह में कम से कम िो बार कारखाने का िौरा करेगा और आपाि नस्िनि के िौरान

उसकी सेवाएँ ित्काल उपलब्ध होंगी।

(ग) पूरे कायय काल में एक योग्य और प्रनशनक्षि ड्रेसर-सह-कंपाउंडर िैनाि रहेगा।

(घ) सर्ी सामान के साि प्रािनमक नचनकत्सा बॉक्ट्स।

(3) 200 से अभधक िभमकों को रोजर्ार िेने िािे कारखानों के भिए -

(क) 500 श्रनमकों िक को रोजगार िेने वाले कारखानों के नलए एक पूर्यकानलक कारखाना नचनकत्सा अनधकारी और प्रत्येक 1000 श्रनमकों या उसके नकसी र्ाग के

नलए एक अनिररि नचनकत्सा अनधकारी होगा।

(ख) इस मामले में व्यावसानयक स्वास््य केंद्र में कम से कम 2 कमरे होंगे, नजनमें से प्रत्येक का न्यूनिम क्षेत्रफल 15 वगय मीटर होगा, नजनके फशय और िीवारें नचकनी,

कठोर और अप्रर्ानवि सिह की होंगी और पयायप्त रूप से प्रकानशि, हवािार ििा सुसनज्जि होंगीं।

(ग) पूरे कायय काल में एक प्रनशनक्षि नसय, एक ड्रेसर-सह-कंपाउंडर और एक स्वीपर-सह-वाडय बॉय मौजूि रहेंगे।

(घ) इस मामले में व्यावसानयक स्वास््य केंद्र, नचनकत्सा आपाि नस्िनियों के प्रबंधन के नलए उपयुि रूप से सुसनज्जि होगा।

3. एम्बुिेंस िैन –

(1) पररनशष्ट ’क’ में शानमल प्रनियाओं को पूरा करने वाले प्रत्येक कारखाने में, पररनशष्ट ’ग’ के अनुसार उपयुि रूप से नननमयि और पूरी िरह से सुसनज्जि एक एम्बुलेंस

वैन उपलब्ध कराई जाएगी और अच्छी नस्िनि में रखी जाएगी, नजसमें एक पूर्यकानलक चालक-सह-मैकेननक और एक सहायक होगा, जो िुघयटनाओं या बीमारी के गंर्ीर

[PART IV

DELHI GAZETTE : EXTRAORDINARY

71

मामलों की नस्िनि में पररवहन के प्रयोजनों के नलए प्रािनमक उपचार में प्रनशनक्षि हो। ऐसा िब िक नकया जाए जब िक नक आपाि नस्िनि के िौरान अल्प सूचना पर ऐसी

सुनवधा प्राप्त करने की व्यवस्िा ननकटविी अस्पिाल या अन्य स्िानों से न की गई हो। एम्बुलेंस वैन का उपयोग यहाँ ननधायररि उद्देश्य के अलावा नकसी अन्य के नलए नहीं

नकया जाएगा और यह हमेशा व्यावसानयक स्वास््य केंद्र के पास उपलब्ध रहेगी।

(2) उप पैरा (1) में प्रिान की गई, ननकटविी स्िानों से एम्बुलेंस वैन प्राप्त करने की छूट, 500 से अनधक श्रनमकों को रोजगार िेने वाले कारखानों पर लागू नहीं होगी।

4. भचभकत्सा परीिण –

(1) पररनशष्ट ’क’ में शानमल प्रनियाओं में ननयोनजि श्रनमकों की नचनकत्सा अनधकारी द्वारा ननम्ननलनखि िरीके से नचनकत्सा जांच की जाएगी –

I. ननयोजन से पूवय एक बार, नकसी कायय नवशेर् के नलए व्यनि की शारीररक उपयुििा सुनननिि करने के नलए;

II. 6 माह की अवनध में एक बार, श्रनमक की स्वास््य नस्िनि सुनननिि करने के नलए, और

III. ननयोजन-पूवय और पूवोि अनुसार की गई आवनधक नचनकत्सा परीक्षाओं का नववरर् ननधायररि प्रपत्र 24 और 25 में िजय नकया जाएगा।

(2) इस प्रनिया में ननयोनजि नकसी र्ी व्यनि की असामान्यिा या अनुपयुििा का पिा चलने पर िुरंि नचनकत्सा अनधकारी को सूनचि नकया जाएगा, जो संबंनधि श्रनमकों

की जांच करेगा और 30 निनों के र्ीिर अपने ननष्ट्कर्ों से अवगि कराएगा। यनि नचनकत्सा अनधकारी की राय है नक इस प्रकार जांचे गए व्यनि को स्वास््य सुरक्षा के

नलए प्रनिया से ननलंनबि नकया जाना आवश्यक है, िो वह ििनुसार अनधर्ोगी को ननिेश िेगा, जो उि श्रनमक को उसी प्रनिया में ननयोनजि नहीं करेगा। ििानप, प्रनिया

से इस प्रकार ननलंनबि नकए गए व्यनि को वैकनल्पक ननयुनि सुनवधाएँ प्रिान की जाएँगी, जब िक नक वह नचनकत्सा अनधकारी की राय में पूर्यििः अक्षम न हो। ऐसी नस्िनि

में प्रर्ानवि व्यनि का उनचि पुनवायस नकया जाएगािः

यनि नचनकत्सा अनधकारी स्वयं नकसी अन्य कमयचारी की जांच कर सकिा है नजसे वह पररनशष्ट ’क’ में वनर्यि प्रनिया में उसके ननयोजन की उपयुििा सुनननिि करने के

नलए या नकसी अन्य कमी की स्वास््य नस्िनि सुनननिि करने के नलए उसकी जाँच आवश्यक समझिा है, िो उसकी राय अंनिम होगी।

(3) नचनकत्सा अनधकारी द्वारा प्रित्त स्वास््य प्रमार्पत्र के नबना नकसी र्ी व्यनि की नई ननयुनि नहीं की जाएगी। यनि नचनकत्सा अनधकारी नकसी व्यनि को पररनशष्ट

’क’ में वनर्यि प्रनिया में कायय करने नलए ननयुि नकए जाने के वास्िे अयोग्य घोनर्ि करिा है, िो ऐसे व्यनि को नचनकत्सा अनधकारी के समक्ष अपील करने का अनधकार

होगा, नजसकी राय इस संबंध में अंनिम होगी।

(4) उप-अनुच्छेि (2) में वनर्यि पररनस्िनियों के कारर् प्रनिया से ननलंनबि नकए गए कमी को नचनकत्सा अनधकारी से स्वास््य प्रमार्पत्र प्राप्त करने और स्वास््य रनजस्टर

में उस आशय की प्रनवनष्टयाँ करने के बाि ही उसी प्रनिया में पुनिः ननयोनजि नकया जाएगा।

...........................

िार् VII

अभतररक्त कल्याणकारी सुभिधाएँ

1. धुिाई सुभिधाएँ -

(1) प्रत्येक कारखाने में सर्ी श्रनमकों के उपयोग के नलए, प्रत्येक 15 व्यनियों पर एक नल उपलब्ध कराया जाएगा और उसका रखरखाव नकया जाएगा, नजसके साि

कंटेनर में िरल साबुन और प्रर्ावी सफाई के नलए नेल ब्रश या अन्य उपयुि साधनों की व्यवस्िा शानमल होगी। ऐसी सुनवधाएँ आसानी से सुलर् होंगी और उन्हें स्वच्छ

एवं स्वास््यकर नस्िनि में रखा जाएगा।

(2) यनि मनहलाओं के नलए ऊपर बिाई गई धुलाई सुनवधाएँ उपलब्ध कराई जािी हैं, िो उनके नलए अलग से व्यवस्िा होंगी और ऐसी सुनवधाओं में हर समय पयायप्त

ननजिा सुनननिि की जाएगी।

72

DELHI GAZETTE : EXTRAORDINARY

PART IV]

2. िोजन कि सुभिधाएँ –

(1) पररनशष्ट ‘क’ में शानमल प्रनियाओं को पूरा करने वाले और 50 या अनधक श्रनमकों को ननयोनजि करने वाले सर्ी कारखानों के अनधर्ोगी, एक पाली में काम करने

वाले सर्ी श्रनमकों के नलए अच्छी िरह हवािार र्ोजन कक्ष की सुनवधाएँ प्रिान करेंगे और उनमें ठंडे ििा स्वच्छ पेयजल की सुनवधा के साि-साि मेज और बैठने की

सुनवधाएँ र्ी उपलब्ध होंगी।

(2) ऐसी सुनवधाओं में सफाई और धुलाई की उपयुि व्यवस्िा शानमल होगी और उन्हें स्वच्छ एवं स्वास््यकर नस्िनि में रखा जाएगा।

3. क्िोकरूम सुभिधाएँ –

(1) पररनशष्ट ‘क’ में शानमल नकसी र्ी प्रनिया को पूरा करने वाले प्रत्येक कारखाने के अनधर्ोगी को प्रनिया में काययरि सर्ी श्रनमकों के नलए लॉकर के साि क्ट्लोकरूम

की सुनवधा उपलब्ध करानी होगी। प्रत्येक श्रनमक को िो लॉकर उपलब्ध कराए जाएँगे, एक काम के कपडों के नलए और िूसरा व्यनिगि कपडों के नलए। लॉकर इस प्रकार

होने चानहएं नक कपडों को लटकाकर रखा जा सके।

(2) उप-अनुच्छेि (1) के अनुसार प्रिान की गई क्ट्लोकरूम सुनवधाएँ, जहाँ िक संर्व हो, अनुच्छेि 1 (1) के अनुसार धुलाई के नलए प्रिान की गई सुनवधाओं के

ननकट नस्िि होंगी। यनि धुलाई सुनवधाओं की व्यवस्िा संर्व न हो, िो क्ट्लोकरूम सुनवधाओं में सफाई और धुलाई के नलए पयायप्त और उपयुि व्यवस्िा होनी चानहए।

4. भिशेष स्नान सुभिधाएँ –

(1) पररनशष्ट ’ख’ के अंिगयि आने वाली प्रनिया को नियानन्वि करने वाले नकसी र्ी कारखाने का अनधष्ठािा, काययरि सर्ी श्रनमकों के नलए नवशेर् स्नान सुनवधाएँ

उपलब्ध कराएगा और ऐसी सुनवधाएँ 25 श्रनमकों या 25 से कम श्रनमकों के नलए 1 की िर से उपलब्ध कराई जाएगी, और उन्हें स्वच्छ एवं स्वास््यकर नस्िनि में रखा

जाएगा।

(2) अनधष्ठािा, पररनशष्ट ’ख’ में आने वाली प्रनियाओं में काययरि सर्ी श्रनमकों को निन या पाली में काम पूरा होने के बाि इस प्रकार उपलब्ध कराई गई स्नान सुनवधाओं

का उपयोग करके स्नान करने के नलए प्रेररि करेगा और ऐसे श्रनमकों को स्नान सुनवधाओं के अलावा नकसी अन्य स्िान पर स्नान करने से प्रर्ावी रूप से रोकेगा।

(3) उपरोि उप-अनुच्छेि (1) में नननहि नकसी र्ी बाि के होिे हुए, मुख्य ननरीक्षक-सह-सुनवधाप्रिािा, नकसी अन्य प्रनिया को नियानन्वि करने वाले नकसी र्ी कारखाने

के अनधष्ठािा से, नजसके नलए उसकी राय में स्वास््य की दृनष्ट से स्नान सुनवधाएँ आवश्यक हैं, नलनखि रूप में नवशेर् स्नान सुनवधाएँ उपलब्ध कराने की अपेक्षा कर सकिा

है।

...........................................

िार् VIII

1. िभमकों के कतगव्य –

(1) पररनशष्ट ’क’ और पररनशष्ट ’ख’ में शानमल प्रनियाओं में ननयोनजि प्रत्येक श्रनमक नकसी र्ी सुरक्षा उपकरर् या साधन या नकसी र्ी सुरक्षा या बाड लगाने की

व्यवस्िा को नननष्ट्िय या िोर्पूर्य नहीं बनाएगा और जैसे ही उसे ऐसे नकसी िोर् का पिा चले, वह उपरोि व्यवस्िाओं की िोर्पूर्य नस्िनि की सूचना िेगा।

(2) कोई र्ी कायय शुरू करने से पहले, पररनशष्ट ’क’ में शानमल प्रनियाओं में ननयोनजि सर्ी श्रनमक अपने काययस्िल के साि-साि प्रनियाओं में प्रयुि मशीनरी, उपकरर्

या यंत्र की जाँच करेंगे और नकसी र्ी खराबी या िोर् की सूचना िुरंि पययवेक्षक या प्रबंधन के नकसी र्ी नजम्मेिार व्यनि को िेंगे।

(3) सर्ी श्रनमक इस अनुसूची के अनुसरर् में उन्हें सौंपे गए नकसी र्ी कायय या नकसी र्ी आपािकालीन कियव्य को पूरा करिे समय प्रबंधन के साि हर िरह से सहयोग

करेंगे और उन्हें जारी नकए गए सर्ी व्यनिगि सुरक्षा उपकरर्ों का हमेशा सावधानीपूवयक उपयोग करेंगे।

(4) पररनशष्ट ’क’ या पररनशष्ट ’ख’ में शानमल प्रनियाओं में ननयोनजि सर्ी श्रनमक प्रनिया क्षेत्र या र्ंडारर् क्षेत्र में धूम्रपान नहीं करेंगे। यनि प्रबंधन द्वारा नवशेर् सुनवधाएं

प्रिान की जािी हैं िो केवल उन्हीं सुनवधाओं का उपयोग नकया जाना चानहए।

[PART IV

DELHI GAZETTE : EXTRAORDINARY

73

(5) पररनशष्ट ’क’ में शानमल प्रनियाओं में ननयोनजि सर्ी श्रनमक अनानधकृि स्िान पर नहीं रहेंगे या अनानधकृि कायय नहीं करेंगे या कोई व्यवस्िा नहीं करेंगे या छोटे

उपाय को नहीं अपनाएंगे या अनुसूची के अनुसरर् में प्रिान की गई नकसी र्ी सुनवधा का िुरुपयोग इस प्रकार नहीं करेंगे नजससे स्वयं के साि-साि ननयोनजि अन्य लोगों

को र्ी खिरा हो।

(6) श्रनमक इन ननयमों के िहि अपेनक्षि नचनकत्सा परीक्षर् कराने से इनकार नहीं करेंगे।

.......................................

िार् IX

मभहिाओं और भकशोरों को काम में िर्ाये जाने पर पाबंिी

(1) मुख्य ननरीक्षक सह अनुिेशक नलनखि आिेश से मनहलाओं और नकशोरों को, उनके स्वास््य और सुरक्षा कारर्ों से, इस अनुसूची के पररनशष्ट “क “ में नननियष्ट

प्रनियाओं में से नकसी में र्ी लगाये जाने से प्रनिबंनधि कर सकिे हैं।

(2) ऐसे व्यनियों को, जो उपरोि उप पैरा (1) के अनुपालन में प्रनिया में काम करने से प्रनिबंनधि या ननर्ेनधि नकये गये हैं, वैकनल्पक कायय निया जायेगा जो उनके

स्वास््य या सुरक्षा की दृनष्ट से हाननकर न हो।

...........................

िार् X

ररयायतें

(1) ररयायतों का अभधकार–

सरकार या सरकार के ननयंत्रर् के अधीन मुख्य ननरीक्षक सह अनुिेशक, पररनशष्ट “क” में नननियष्ट प्रनियाओं का पररचालन कर रहे नकसी र्ी कारखाने को, इस अनुसूची

की नकसी र्ी अपेक्षा के अनुपालन से, पूरी िरह या आंनशक रूप से छूट िे सकिे हैं, यनि कारखाना चला रहे व्यनि द्वारा यह स्पष्ट और संिोर्जनक ढंग से स्िानपि कर

निया जाये नक काम पर लगाये गये कनमयों की सुरक्षा य़ा स्वास््य सुनननिि करने के नलये नकसी र्ी अपेक्षा का अनुपालन आवश्यक नहीं है ििा इस अनुसूची में नननियष्ट

अपेक्षाओं के नलये प्रर्ावी वैकनल्पक व्यवस्िाएं उपलब्ध हैं।

पररभशष्ट “क“

कोई र्ी काम या काम का वह नहस्सा नजसमें -

(क) ननम्ननलनखि में से नकसी एक का र्ी ननमायर्, पररचालन या प्रानप्त की जािी होिः-

(i) सोनडयम, पोटानशयम, लोहा, एल्युनमननयम, कोबाल्ट, ननकेल, िांबा, आसेननक, एंटीमनी, िोनमयम, जस्िा, सेलेननयम, मैग्नेनशयम, कैडनमयम, पारा, बेररनलयम और

इनके जैनवक या अजैनवक लवर्, नमश्र धािु, ऑक्ट्साइड और हाइड्रोक्ट्साइड;

(ii) अमोननया, अमोननयम हाइड्रोक्ट्साइड और अमोननयम लवर्;

(iii) सल्फरस, सल््यूररक, नाइनरक, नाइरस, हाइड्रोक्ट्लोररक, हाइड्रो्लोररक, हाइड्रोआयोनडक, हाइड्रो सल््यूररक, हाइड्रोब्रोनमक, बोररक के काबयननक या अकाबयननक

यौनगक;

(iv) सायनोजेन यौनगक, सायनाइड यौनगक, सायनेट यौनगक;

(v) फॉस्फोरस और ओरेगैनो फॉस्फोरस कीटनाशकों के अलावा इसके यौनगक।

(vi) क्ट्लोरीन

74

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(ख) धािु सल्फाइड के नवखंडन से हाइड्रोजन सल्फाइड बनिा हो, या इन सल्फाइड के उत्पािन में हाइड्रोजन सल्फाइड का उपयोग होिा हो;

(ग) क्ट्लोर अल्कलाई संयंत्रों में ब्लीनचंग पाउडर का ननमायर् होिा हो या क्ट्लोरीन गैस बनायी जािी हो;

(घ) (i) गैस िार या कोलिार या नबटुमन या शेल ऑयल अस्फाल्ट या ऐसे अलकिरे का कोई र्ी अवशेर् स्रानवि नकया जािा हो या रासायननक ननमायर् की नकसी र्ी

प्रनिया में इस्िेमाल नकया जािा हो;

(ii) टार आधाररि नसंिेंनटक रंजन सामग्री या इनकी मध्यविी सामग्री उत्पानिि की जािी हो;

(ङ) नाइरो यौनगकों के ननमायर् में नाइनरक अम्ल का उपयोग होिा हो;

(च) नाइरो यौनगकों के इस्िेमाल से नवस्फोटक बनाये जािे हों;

(छ) एनलफैनटक या एरोमैनटक यौनगक या उनके धानत्वक और अधानत्वक डेररवेनटव जैसे क्ट्लोरोफॉमय, एनिलीन ग्लायकॉल, फॉमयल्डीहाइड, बेंजाइल क्ट्लोराइड, फेनॉल,

नमिाइल, इिाइल कीस्टोन पेरॉक्ट्साइड, कोबाल्ट काबोननल, टंगस्टन काबायइड इत्यानि बनाये जािे हों या इनकी पुनिःप्रानप्त की जािी हो।

.............................

पररभशष्ट “ख”

िार् IV के पैरा 4 के अनुसार रसायनों का हाभनकर

असर िूर करने के भिए भिशेष बाभर्थंर् व्यिस्र्था से संबंभधत प्रभियाएँ

1. नाइरो या एनमडो प्रनियाएं

2. सर्ी िोम प्रनियाएं

3. गैस या कोलिार स्रानवि करने की प्रनिया या वे रासायननक ननमायर् प्रनियांए नजनमें कोलिार इस्िेमाल होिा है

4. साइनोजेन्स यौनगक, साइनाइड यौनगक, साइनेट यौनगकों के ननमायर्, पररचालन, हैंडनलंग या पुनिःप्रानप्त से जुडी प्रनियाएं

5. ब्लीनचंग पाउडर के ननमायर् या क्ट्लोर अल्कलाई संयंत्रों में क्ट्लोरीन गैस बनाने की प्रनिया।

6. ननकेल और इसके यौनगकों के ननमायर्, पररचालन, या पुनिःप्रानप्त से जुडी प्रनियाएं।

7. एनलफैनटक या एरोमैनटक यौनगक या उनके डेररवेनटव या प्रनिस्िानपि डेररवेनटव के ननमायर्, पररचालन या पुनिःप्रानप्त से जुडी सर्ी प्रनियाएं।

पररभशष्ट “र्” एंबुिेंस

एंबुिेंस में ननम्ननलनखि उपकरर् उपलब्ध होने चानहयेिः

सामान्यः

•

मुडने वाले और समायोनजि होने वाले यंत्रो के साि पनहया लगा स्रेचर; स्रेचर का नसरा उपर उठाये जा सकने वाला होना चानहये;

•

उपकरर् से साि सक्ट्शन यूननट नफक्ट्स होनी चानहए;

•

उपकरर्ों के साि नफक्ट्स ऑक्ट्सीजन आपूनिय;

•

नगलाफ के साि िनकया;

•

चािरें;

•

कंबल;

•

िौनलया;

•

एमेनसस बैग;

[PART IV

DELHI GAZETTE : EXTRAORDINARY

75

•

बेड पैन;

•

मूत्र पात्र यानी यूररनल;

•

ग्लास;

सुरक्षा उपकरणः

•

30 नमनट िक चलने वाले ्लेयसय;

•

्लड लाइट्स;

•

्लैश लाइट्स;

•

सूखे पाउडर जैसी अनग्न शमन सामग्री;

•

इंसुलेटेड िस्िाने

आपातकालीन देखभाल उपकरण - रीसससटेशन सिर से होश में लानाः

•

पोटेबल सक्ट्शन यूननट;

•

पोटेबल ऑक्ट्सीजन यूननट;

•

बैग- वॉल्व- मास्क, हाि से संचानलि होने वाला कृनत्रम वेंनटलेशन यूननट;

•

एयरवेज;

•

माउि गैग्स;

•

रैकोस्टोमी एडेप्टर;

•

शॉटय स्पाइन बोडय;

•

आई.वी.्लूड्स, लगाने वाली यूननट के साि;

•

बी.पी. मैनोमीटर;

•

कग;

•

स्टेिोस्कोप

सथिरीकरण

•

लंबा और छोटा गद्दीिार बोडय;

•

वायर लैडर िख्िा;

•

नत्रकोर्ीय पट्टी;

•

लॉंग एंड शॉटय स्पाइन बोड्यस

ड्रेससिंग

• गॉज़ पैड – 4” x 4”;

• यूननवसयल ड्रेनसंग 10” x 36”;

• एल्युनमननयम फॉइल का रोल;

• सॉ्ट रोलर बैंडेज 6” x 5 गज;

• 3” रोल में नचपकने वाला टेप;

76

DELHI GAZETTE : EXTRAORDINARY

PART IV]

• से्टी नपन;

• बैंडेज शीट;

• बनय शीट।

ज़हर के उपचार के सलये

•

आइपेक नसरप

•

सनिय चारकोल

•

सपयिंश नकट

•

पीने का पानी

आपात औषस ः

•

आवश्यकिानुसार (केवल नचनकत्सा अनधकारी के परामशय पर)

अनुसूची- XII

पॉटरी यानी भमट्टी के बतगनों का भिभनमागण

1. पररिाषाएं – इस अनुसूची के प्रयोजनों के भिये

(क) "नमट्टी के बियनों" में नमट्टी के बियन, पत्िर के बियन, चीनी नमट्टी के बरिन, चीनी नमट्टी की टाइलें, और ऐसी नमट्टी से या नमट्टी ििा क्ट्वाट्यज, चकमक पत्िर, फेल्डस्पार

और नजप्सम जैसी अन्य सामनग्रयों के नमश्रर् से बनी कोई अन्य वस्िुएँ शानमल हैं;

(ख) "कुशल एग्जॉस्ट ड्रै्ट " का अिय है धूल या धुएँ को हटाने के नलए यांनत्रक या अन्य िरीकों से नकया गया स्िानीयकृि वेंनटलेशन िानक उसे नकसी र्ी ऐसे स्िान की

हवा में फैलने से रोका जा सके जहाँ काम नकया जा रहा हो। ऐसा ड्रा्ट कुशल नहीं माना जाएगा जो उस नबंिु पर उत्पन्न धूल या धुएँ को प्रर्ावी ढंग से हटाने में नवफल

रहिा है, जहाँ से धूल या धुआँ उत्पन्न होिा है;

(ग) "फेटनलंग" में स्कैलोनपंग, टोइंग, सैंड पेपररंग, सैंड नस्टनकंग, ब्रनशंग या नमट्टी के बियनों की सफाई की कोई अन्य प्रनिया शानमल है नजसमें धूल ननकलिी है;

(घ) "लेडलेस ग्लेज़" का अिय है ऐसा ग्लेज़ नजसमें उसके शुष्ट्क र्ार के एक प्रनिशि से अनधक लेड मोनोऑक्ट्साइड के रूप में पररकनलि लेड यौनगक न हो;

(ङ) "कम घुलनशीलिा ग्लेज़" से िात्पयय ऐसे ग्लेज़ से है जो अपने शुष्ट्क र्ार के पांच प्रनिशि से अनधक िनु हाइड्रोक्ट्लोररक अम्ल के प्रनि प्रनिनिया नहीं करिा है, जो

एक घुलनशील सीसा यौनगक है नजसे नीचे वनर्यि िरीके से ननधायररि नकए जाने पर सीसा मोनोऑक्ट्साइड के रूप में पररकनलि नकया जािा है:

100 नडग्री सेंटीग्रेड पर शुष्ट्क की गयी सामग्री की र्ाररि मात्रा को सामान्य िापिम पर उसके र्ार के एक हजार गुना हाइड्रोक्ट्लोररक अम्ल के जलीय घोल में, नजसमें

र्ार का 0.25 प्रनिशि हाइड्रोजन क्ट्लोराइड हो, लगािार एक घंटे िक नहलाया जायेगा। इसके बाि इस घोल को एक घंटे के नलये नस्िर छोड निया जायेगा और नफर छान

नलया जायेगा। अब छन्ने में मौजूि सीसा लवर् को लेड

सल्फाइड के रूपर में अवक्षेनपि और र्ाररि नकया जाएगा।

(च) "नपसी हुई या चूनर्यि चकमक पत्िर या क्ट्वाट्यज" में प्राकृनिक रेि शानमल नहीं है; और

(छ) "कुम्हार की िुकान" में वे सर्ी स्िान शानमल हैं जहाँ नमट्टी के बियनों को िबाकर या नकसी अन्य प्रनिया द्वारा बनाया जािा है और वे सर्ी स्िान जहाँ नबनस्कट की

आग में रखने से पहले नमट्टी के बियनों को आकार िेना, ढालना या अन्य उपचार नकया जािा है।

2. कुशि एग्जॉस्ट ड्रैफ्ट - (1) ननम्ननलनखि प्रनियाएँ कुशल एग्जॉस्ट ड्रै्ट के उपयोग के नबना नहीं की जाएँगी –

(क) सर्ी प्रनियाएँ नजनमें सूखे और नबना र्ुने हुए सीसे के यौनगक का उपयोग या हेरफेर शानमल है;

(ख) नकसी र्ी प्रकार की फेनटंग प्रनियाएँ, चाहे हरे बियनों पर हों या नबस्कुट पर, बशिे नक यह गीली फेनटंग पर लागू न हो, और यांनत्रक शनि की सहायिा के नबना

[PART IV

DELHI GAZETTE : EXTRAORDINARY

77

नमट्टी के बियनों की कर्ी-कर्ार की जाने वाली नफनननशंग पर लागू न हो;

(ग) टाइल या अन्य वस्िुएँ या अन्य वस्िुएँ बनाने के नलए नमट्टी के चूर्य या नकसी अन्य सामग्री को िबाव द्वारा हटाना, नसवाय इसके नक-

(i) यह कायय ऐसी मशीन में नकया जािा है जो इस प्रकार बंि हो नक धूल को प्रर्ावी रूप से बाहर ननकलने से रोका जा सके; या

(ii) स्िानांिररि की जाने वाली सामग्री इिनी नम हो नक धूल न ननकल सके;

(घ) धूल से मुि रखने के नलये टाइलों पर िबाव बनाना, प्रत्येक िाब के साि ननकासी जुडी होनी चानहये, और टाइल्स के अलावा अन्य सामग्री से धूल हटाना, जब िक

नक वह सामग्री इिनी गीली न हो नक धूल ननकलने की गुंजाइश ही न हो;

(ङ) िबाव से नमट्टी से बनी टाइलों की फेटनलंग, नसवाय उन नस्िनियों के जहां फेटनलंग हो चुकी हो, या गीली सामग्री हो, और नमट्टी से बनी अन्य सामग्री की फेटनलंग,

जबिक नक सामग्री इिनी गीली हो नक धूल न ननकले;

(च) सैगर की लोनडंग और अनलोनडंग की प्रनिया नजसमें चूर्य या पाउडर स्फनटक, चकमक पत्िर, एल्यूनमना या अन्य सामग्री शानमल हो;

(छ) नमट्टी के नबनस्कट को ब्रश करना, जब िक नक यह प्रनिया ऐसे कमरे में न की जाए जहाँ कुशल सामान्य यांनत्रक वेंनटलेशन या अन्य वेंनटलेशन उपलब्ध हो, नजसे

ननरीक्षक-सह-सुनवधाकिाय द्वारा मामले की सर्ी पररनस्िनियों को ध्यान में रखिे हुए पयायप्त प्रमानर्ि नकया गया हो;

(ज) नबस्कुट के बियनों की फेटनलंग, नजन्हें चकमक पत्िर या क्ट्वाट्यज पाउडर में पकाया गया हो, नसवाय इसके नक यह कायय मशीनों में नकया जािा है, जो इस प्रकार बंि

हों नक धूल को ननकलने से प्रर्ावी रूप से रोका जा सके;

(झ) डुबोकर या अन्य प्रनियाओं से ग्लेज के इस्िेमाल के बाि बियनों की सफाई;

(ञ) नमट्टी के बियनों और सगर के नलए सामग्री को कुचलना और सूखा पीसना, जब िक नक यह काम ऐसी मशीनों में न नकया जाए जो धूल को प्रर्ावी ढंग से ननकलने

से रोक सकें या इिनी नम हों नक धूल न ननकल सके;

(ट) चूनर्यि चकमक पत्िर, क्ट्वाट्यज, नमट्टी के ग्रॉग या इन सामनग्रयों के नमश्रर् को छानना या उनका उपयोग करना, जब िक नक वह इिना नम न हो नक धूल न उडे;

(ठ) नवद्युि चानलि पनहये पर टाइलों को पीसना, जब िक नक पनहये पर पानी का प्रर्ावी नछडकाव न नकया जाए;

(ड) एनलवेटर और कन्वेयर द्वारा सामनग्रयों को उठाना और ले जाना, जब िक नक वे प्रर्ावी रूप से बंि न हों और इस प्रकार व्यवनस्िि न हों नक धूल हवा में या उसके

आस-पास नकसी र्ी स्िान पर न फैले जहाँ लोग काययरि हों;

(ढ) प्रवाह सामग्री िैयार करना या उसका वजन करना, सूखे रंगों की लॉननंग, रंग-झाडन और रंग उडाना;

(र्) साँचा बनाना, जब िक नक प्लास्टर ऑफ पेररस रखने के नलए उपयोग नकए जाने वाले नडब्बों या समान पात्रों पर उपयुि ढक्ट्कन न लगे हों; और

(ि) कैल्सीनयुि सामग्री का उपयोग करना, जब िक नक सामग्री िैयार न हो गई हो और इिनी गीली न हो नक धूल न उडे।

2 (i) धूल ननकालने या िबाने वाले सर्ी उपकरर्ों का परीक्षर् प्रत्येक 6 महीने में कम से कम एक बार सक्षम व्यनि द्वारा अवश्य होना चानहये, इस परीक्षर् से सामने

वाली नकसी र्ी त्रुनट को नजिनी जल्िी संर्व हो सके िूर नकया जाना चानहये।

(ii) ऐसी जांच और परीक्षर्ों का नववरर् फॉमय नं 26 में रखा जायेगा।

78

DELHI GAZETTE : EXTRAORDINARY

PART IV]

3. प्रभिया का संचािन- ननम्ननलनखि प्रनियाओं में से प्रत्येक का संचालन इस ढंग से और ऐसी पररनस्िनियों में होना चानहये िानक इन्हें एक िूसरे से और अन्य

प्रनियाओं से स्पष्ट रूप से अलग रखा जा सके;

(क) सामग्री को चूरा करना और सूखा पीसा जाना या छानना, फेटनलंग, टाइल्स को िबाना, नमट्टी और कच्चे बियन सुखाना ििा सैगर की लोनडंग अनलोनडंग

(ख) शुष्ट्क सीसा यौनगक के उपयोग से जुडी सर्ी प्रनियाएं

4. ग्िेज का उपयोर् – नमट्टी के बियन बनाये जाने वाली फैक्ट्री में ऐसे नकसी र्ी ग्लेज का इस्िेमाल नहीं होगा जो सीसा रनहि या ननम्न घुलनशीलिा वाला ग्लेज न हो।

5. र्िगिती मभहिाओं तर्था भकशोरों से संबंभधत भनषेध – खंड 2 में नननियष्ट नकसी र्ी गनिनवनध में या ऐसी गनिनवनधयां संचानलि नकये जाने वाले स्िानों पर गर्यविी

मनहलाओं या नकशोरों को नहीं लगाया जायेगा।

6. कुम्हार का चाक - कुम्हार का चाक (जॉली और जाइगर) स्िीन के साि उपलब्ध कराया जाना चानहये या इस प्रकार नवनननमयि होना चानहये नक नमट्टी के टुकडे

चाक से बाहर नछटकने न पायें।

7. धूि उडने से रोकने के उपायः-

(1) फशय की सफाई के िौरान उडने वाली धूल को रोकने के नलये पानी नछडक कर या नकसी अन्य िरीके से सर्ी व्यावहाररक उपाय नकये जाने चानहये।

(2) काम बंि हो जाने के बाि की जाने वाली सफाई के िौरान उडने वाली धूल रोकने की नमी नवनध को प्रर्ावी बनाने में लकडी का र्ींगा बुरािा या अन्य उपयुि सामग्री

का उपयोग नकया जाना चानहये।

8. फशग की सफाईः- कुम्हार की िुकान की फशय, नस्लप हाउस यानी गीली नमट्टी िैयार करने की जगह, नडनपंग हाउस यानी िरल ग्लेज चढाये जाने का स्िान और बियनों

की सफाई का स्िान ठोस, साफ- समिल और कम पंहुच वाला होना चानहये। एक वयस्क व्यनि द्वारा नमी नवनध से प्रनिनिन इसकी सफाई होनी चानहये।

9. भचभकत्सा अभधकारी द्वारा भचभकत्सा जांच –

(1) पैरा 3 के िहि उनल्लनखि नकसी र्ी प्रनिया में काम करने वाले प्रत्येक कमी की नचनकत्सा जांच, उसकी पहली नौकरी के 15 निन के अंिर नचनकत्सा अनधकारी

द्वारा की जायेगी। इस जांच में मूत्र और रि में सीसे की जांच, हीमोग्लोनबन, पेशाब में एएलए, कोनशकाओं के नखसकने की जांच शानमल है। नकसी र्ी कामगार को

कारखाने में उसकी पहली नौकरी के पंद्रह निन बाि, िब िक काम करने की अनुमनि नहीं िी जायेगी जबिक उसे नचनकत्सा अनधकारी द्वारा ऐसे काम के नलये नफट प्रमानर्ि

न कर निया जाये।

(2) उप-पैराग्राफ 3(क) और 3(ढ) के िहि शानमल नकसी र्ी प्रनिया में काययरि सर्ी कनमयों की प्रत्येक 3 महीने में एक बार नचनकत्सा अनधकारी द्वारा जाँच की

जाएगी। पैरा 3 के शेर् उप-पैराग्राफ में उनल्लनखि नकसी र्ी अन्य प्रनिया में काययरि कनमयों की प्रत्येक 12 महीने में एक बार नचनकत्सा अनधकारी द्वारा जाँच की जाएगी।

सर्ी श्रनमकों के नलये ऐसी जाँचों में उप-पैराग्राफ (1) में नननियष्ट सर्ी परीक्षर् शानमल होंगे, नसवाय छािी के एक्ट्स-रे के, जो 3 वर्य में एक बार होगा।

(3) नकसी कमयचारी की जाँच के बाि, नचनकत्सा अनधकारी, फॉमय-24 में स्वास््य प्रमार्पत्र जारी करेंगे। परीक्षर् और पुन: परीक्षर् का ररकॉडय प्रमार्पत्र में िजय नकया

जाएगा और यह प्रमार्पत्र कारखाने के अनधर्ोगी की सुरक्षा में रखा जाएगा। उप-पैराग्राफ (1) और (2) के अंिगयि की गई प्रत्येक जाँच का ररकॉडय, जाँच की प्रकृनि

और पररर्ाम सनहि, नचनकत्सा अनधकारी द्वारा फॉमय-05 में स्वास््य पंनजका में र्ी िजय नकया जाएगा।

(4) स्वास््य प्रमार्पत्र और स्वास््य पंनजका ननरीक्षक-सह-अनुिेशक के ननरीक्षर् के नलए उपलब्ध रखे जाएँगे। यनि नचनकत्सा अनधकारी की राय में कोई कमयचारी नकसी

र्ी समय इस प्रनिया में काम के नलए अब उपयुि नहीं रह गया है, और इसमें बने रहने से उसके स्वास््य को खिरा हो सकिा है, िो वह प्रमार्पत्र और स्वास््य पंनजका

में अपने ननष्ट्कर्ों का ररकॉडय िजय करेगा। इस प्रनवनष्ट में वह अवनध र्ी िजय होनी चानहए नजसमें वह कमयचारी को उस काम के नलये अयोग्य मानिा है। प्रनिया से हटाय़े गये

व्यनि को वैकनल्पक प्लेसमेंट निया जायेगा, जब िक नक नचनकत्सा अनधकारी की राय में उसे पूरी िरह अक्षम न माना जाए, ऐसा होने पर उसका समुनचि पुनवायस नकया

जायेगा।

(5) उपरोि उप पैराग्राफ (4) के िहि काम के नलये अननफट पाये गये नकसी र्ी व्यनि को िबिक नफर से काम पर नहीं रखा जायेगा या उि प्रनियाओं में काम करने

की अनुमनि नहीं िी जायेगी जबिक नक नचनकत्सा अनधकारी आगे परीक्षर् के बाि नफर से उसे उन प्रनियाओं में काम करने के नलये नफट प्रमानर्ि नहीं कर िेिा।

[PART IV

DELHI GAZETTE : EXTRAORDINARY

79

10. सुरिा उपकरणः-

(1) अनधर्ोगी को अनुच्छेि 3 के अंिगयि आने वाले प्रसंस्करर् में काययरि सर्ी व्यनियों के नलए उपयुि ओवरऑल और हाि ढकने वाले वस्त्र उपलब्ध कराने होंगे

और उनका रखरखाव करना होगा।

(2) अनधर्ोगी को जलरोधक या समान सामग्री से बने उपयुि एप्रन उपलब्ध कराने होंगे और उनका रखरखाव करना होगा, नजन्हें नडपर, नडपर सहायक, थ्रोवसय, जॉली

वकयर, कास्टर, मोल्ड ननमायिा, नफल्टर प्रेस और पग नमल श्रनमकों के उपयोग के नलए प्रनिनिन स्पंज नकया जा सके।

(3) अनुच्छेि 10(2) के अनुसार प्रिान नकए गए एप्रन को पहनने वालों द्वारा स्पंज या अन्य गीली प्रनिया द्वारा प्रनिनिन अच्छी िरह से साफ नकया जाएगा। सर्ी

ओवरऑल और नसर ढकने वाले कपडों को सप्ताह में कम से कम एक बार धोया, साफ और मरम्मि नकया जाएगा, और यह धुलाई, सफाई या मरम्मि अनधर्ोगी द्वारा

की जाएगी।

(4) नकसी र्ी व्यनि को उपयुि और कुशल धूल ननरोधक उपकरर् पहने नबना धूल सामग्री की बोररयों को खाली करने, धूल सामग्री को िौलने और नमलाने और बॉल

नमलों और प्लंजरों को चाजय करने का काम करने की अनुमनि नहीं िी जाएगी।

11. धुलाई की सुनवधाएं

(1) अनधर्ोगी पैरा 3 में नननियष्ट नकसी र्ी प्रनिया में लगाये गये सर्ी व्यनियों के नलये साफ सुिरी व्यवस्िा उपलब्ध करायेंगे और उसका प्रबंधन करेंगेिः-

(क) धुलाई का स्िान, इनमें से नकसी र्ी कवर के साि –

(i) मजबूि सिह और वेस्ट पाइप लगी, समुनचि लंबाई की रॉफ यानी टब, नजसमे नकसी एक समय में काम कर रहे पांच लोगो में प्रत्येक के नलये कम से कम एक फुट

की जगह हो ििा टब के उपर नल या जेट से, कम से कम िो नमनट के अंिराल पर, साफ पानी की लगािार आपूनिय होिी हो; या

(ii) नकसी र्ी समय काम में लगे प्रत्येक पांच लोगों के नलये कम से कम एक नल या स्टैंड पाइप, नजससे साफ पानी की लगािार आपूनिय होिी हो, इन नलों या स्टैंड

पाइप के बीच कम से कम 1.20 मीटर की िूरी होनी चानहये; और

(ख) समुनचि सामग्री से बने साफ िौनलये की र्ी पयायप्त व्यवस्िा होनी चानहये, नजसे प्रनिनिन बिला जाये। साबुन और नेल ब्रश की र्ी पयायप्त आपूनिय रहनी चानहये।

12. धुिाई कै भिये भिया जाने िािा समयः-

पैराग्राफ 2 में उनल्लनखि नकसी र्ी प्रनिया में लगे व्यनि को, प्रत्येक र्ोजन और प्रत्येक निन का काम खत्म होने से पहले, र्ोजन के नलये ननधायररि समय के अनिररि

कम से कम िस नमनट का समय धुलाई के नलये निया जाना चानहये।

13 िोजन किः-

(1) नवश्राम अवनध के िौरान पररसर में उपनस्िि सर्ी लोगों के उपयोग के नलये समुनचि र्ोजनालय की व्यवस्िा होनी चानहये, नजसमें प्रत्येक व्यनि को कम से कम

0.93 वगय मीटर की जगह उपलब्ध हो और र्ोजनालय में ननम्‍नांनकि सुनवधाएं हो –

(क) पयायप्त संख्या में मेज और पीठ टेकने की सुनवधा के साि कुनसयां या बेंच;

(ख) बियन धुलने की व्यवस्िा;

(ग) खाना गमय करने के पयायप्त साधन; और

(घ) पयायप्त मात्रा में पीने का पानी;

80

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(2) र्ोजनालय में िाजा हवा आने जाने की पयायप्त व्यवस्िा होनी चानहये, इसे साफ रखा जाना चानहये और इसका प्रबंधन नकसी नजम्मेिार व्यनि के हािों मे होना

चानहये।

(14) कायग कि में खाने पीने की चीजें िाना भनभषद्ध – पैरा 3 में उनल्लनखि नकसी र्ी प्रनिया का ननष्ट्पािन चल रहे नकसी र्ी कायय कक्ष में खाने पीने की चीजें,

पान और सुपारी या िंबाकू लाने की मनाही है। र्ोजन या नवश्राम अवकाश के िौरान नकसी र्ी व्यनि को कायय कक्ष में रहने की अनुमनि नहीं है।

15. क्िॉक रूम इत्याभि – पैरा 2 में उनल्लनखि नकसी र्ी प्रनिया में काम कर रहे सर्ी व्यनियों के नलये ये सुनवधाएं उपलब्ध करायी जायेंगी –

(क) काम करने की अवनध के िौरान उिार कर रखे गये वस्त्रों को सुरनक्षि रखने के नलये एक क्ट्लॉक रूम होगा और यह स्िान नकसी र्ी र्ोजन कक्ष से अलग होगा; और

(ख) पैरा 11 के िहि उपलब्ध कराये गये सुरक्षा उपकरर्ों को रखने के नलये पृिक और समुनचि व्यवस्िा होगी।

16. अनुप्रयोर्ः- ये प्रावधान उस कारखाने पर लागू नहीं होंगे जहां नमट्टी के बियन नही बनल्क ननम्ननलनखि में से कोई र्ी वस्िु बनायी जािी हैिः—

(क) नबना ग्लेज या लवर् ग्लेज की ईंट और टाईल्स; और

(ख) प्लानस्टक मृिा से टेराकोटा वास्िु नशल्पीय और या िो ग्लेज रनहि या केवल सीसा रनहि ग्लेज से पॉनलश।

17. छूटः-

यनि मुख्य ननरीक्षक सह अनुिेशक नकसी र्ी कारखाने के संिर्य में इस बाि को लेकर संिुष्ट हों नक फैक्ट्री के कनमयों की सुरक्षा के नलये इस अनुसूची के सर्ी या नकसी

प्रावधान का पालन आवश्यक नहीं है, िो वह नलनखि रूप से फैक्ट्री को सर्ी या नकसी प्रावधान से छूट िेिे हुए प्रमार्पत्र िे सकिे हैं, प्रमार्पत्र में छूट का आधार नननियष्ट

नकया जा सकिा है। यह प्रमार्पत्र मुख्य ननरीक्षक सह अनुिेशक द्वारा नबना कोई कारर् बिाये रद्द नकया जा सकिा है।

.....................

अनुसूची- XIII

पानी के भिद्युत भिच्छेिन से भनभमगत ऑक्सीजन और हाइड्रोजन का संपीडन

1. इिेक्रोिाइट संयत्र स्र्थिः- नवद्युि नवच्छेिन संयंत्र स्िानपि नकया जाने वाला कमरा ऑक्ट्सीजन और हाइड्रोजन के र्ंडारर् और संपीडन संयत्र से और नबजली

जेनरेटर कक्ष से र्ी अलग होना चानहए।

2. शुद्धता की जांच – (1) ऑक्ट्सीजन और हाइड्रोजन की शुििा की जांच सक्षम व्यनि द्वारा प्रत्येक नश्ट में कम से कम एक बार ननम्ननलनखि स्िलों पर होनी

चानहयेिः-

(क) नवद्युि नवच्छेिन कक्ष में;

(ख) गैस होल्डर इनलेट पर; और

(ग) कम्प्रेशर के अवशोर्र् नसरे पर

(2) शुििा का मान जांच करने वाले व्यनि के हस्िाक्षर सनहि पंनजका में िजय नकया जाना होगा।

परन्‍िु, यह उपबंनधि है नक यनि इलेक्ट्रोनलनसस संयंत्र अलामय लाइट के साि ऑक्ट्सीजन और हाइड्रोजन की पररशुििा के स्वचानलि ररकॉडयर से युि है, िो गैस की

पररशुििा की जांच केवल कंप्रेसर के अवशोर्र् नसरे पर नकया जाना पयायप्त है।

3. संपीडन से संबंभधत प्रभतबंध – ऑक्ट्सीजन और हाइड्रोजन गैसों को संपीनडि नहीं नकया जाएगा यनि उनकी शुििा, जैसा नक ऊपर पैराग्राफ 2 के िहि ननधायररि

[PART IV

DELHI GAZETTE : EXTRAORDINARY

81

नकया गया है, नकसी र्ी समय 98% से कम हो जािी है। ।

4. नकारात्मक िाब भस्िच का प्रािधान – गैस होल्डर में नलनमट नस्वच के अलावा हाइड्रोजन सक्ट्शन मेन में या इसके पास ििा गैस होल्डर और हाइड्रोजन कंप्रेशर

के बीच एक संवेिनशील ननगेनटव प्रेशर नस्वच र्ी निया जायेगा िानक गैस होल्डर के ननवायि होने िक खाली हो जाने की नस्िनि में कंप्रेशर मोटर को नस्वच ऑफ नकया जा

सके।

(5) र्ैस होल्डर भस्िच – गैस होल्डर खाली होने की नस्िनि में इसकी बेल को इसकी ननम्निम नस्िनि के 30 सेंटीमीटर के िायरे में जाने की अनुमनि नहीं होगी और

गैस होल्डर में नलनमट नस्वच इस िरह से लगाया जायेगा नक सीमा िक पंहुचिे ही कंप्रेशर मोटर नस्वच ऑफ हो जाये।

(6) काभस्टक सोडा की पररशुद्धता – खारा घोल बनाने के नलये प्रयुि पानी, कानस्टक सोडा और कानस्टक पोटाश नवद्युि नवच्छेिन के नलये उपयुि मानक के होने

चानहये।

(7) भिपरीत ध्रुिों का भखंचाि पिटने को िेकर सतकगता – इलेक्ट्रोलाइज सेल और नवद्युि जेनरेटर टनमयनल के बीच नवद्युिीय संपकय इस प्रकार सृनजि होना चानहये

िानक ध्रुवीय नखंचाव पलट सकने की आशंका उत्पन्न करने वाले गलि कनेक्ट्शन को काटा जा सके। नस्वच बोडय पर या नबजली जेनरेटर टनमयनल पर गलि कनेक्ट्शन के

कारर् ध्रुवीय नखंचाव पलटने की नस्िनि में नबजली कट ऑफ करने के नलये स्वचानलि यंत्र र्ी उपलब्ध कराया जायेगा।

(8) र्ैस पाइपों की रंर्ाई – ऑक्ट्सीजन और हाइड़्रोजन गैस पाइपों को अलग अलग रंगों से पेंट नकया जाना चानहये। जब र्ी मरम्मि या नकसी अन्य कायय से हाइड्रोजन

पाइप खोली जाय िो नफर से कनेक्ट्ट करने पर उस पाइप से हाइड्रोजन पास कराने से पहले पाइप की सारी हवा ननकाल िी जानी चानहये।

(9) फ्िेम प्रूफ भफभटंग्स का उपयोर्- इलेक्ट्रोलाइजर कक्ष में नबजली की सर्ी वायररंग और यंत्र ्लेमफ्रूफ होने चानहये या ्लेमप्रूफ नफनटंग्स से कवर होने चानहये और

इस कमरे में, या जहां गैस का संपीडन और नफनलंग की जा रही हो, खुली लाइट या लौ लाने पर पूरी िरह पाबंिी होनी चानहये। सर्ी प्रमुख स्िानों पर इस चेिावनी से

संबंनधि नोनटस लगायी जानी चानहये।

(10) ताप या फ्िेम से संबंभधत कायों पर प्रभतबंध – इलेक्ट्रोलाइजर संयंत्र ििा गैस होल्डर और कंप्रेशर के नकसी र्ी नहस्से की वेनल्डंग, ब्रेनजंग, सोल्डररंग या कनटंग

िब िक नहीं होनी चानहये जब िक उस नहस्से से नकसी नवस्फोटक सामग्री को हटाने के उपाय न नकये जायें और उस नहस्से को ऐसे कायों के नलये सुरनक्षि न बना नलया

जाये। जब िक संयंत्र की धािु अच्छी िरह ठंडी न हो जाये कोई र्ी नवस्फोटक सामग्री उसमे नहीं डाली जानी चानहये िानक नवस्फोट के नकसी र्ी खिरे से बचा जा सके।

(11) मरम्मत इत्याभि का कोई िी कायग पयागप्त भनरीिण में भकया जाना चाभहये – पररचालन, मरम्मि या रखरखाव का कोई र्ी कायय ऐसे व्यनि के सीधे ननरीक्षर्

के नबना नहीं नकया जाय, नजसे नवस्फोट के नकसी र्ी जोनखम से बचने के आवश्यक एहनियाि के बारे में पयायप्त प्रनशक्षर्, अनुर्व और जानकारी हो और जो ऐसे कायय

के पययवेक्षर् में पयायप्त रूप से सक्षम हो। लगाये जाने या मरम्मि के बाि नबजली का कोई र्ी जेनरेटर/ इलेक्ट्रोलाइजर नस्वच ऑन नहीं नकया जाना चानहये जबिक नक ये

उन सक्षम व्यनियों द्वारा अनर्प्रमानर्ि न हो, नजनके सीधे ननरीक्षर् में संयंत्र स्िानपि नकये जाने या मरम्मि का काम नकया गया हो और पैराग्राफ 7 की अपेक्षानुसार ध्रुवीय

नखंचाव के नलये टनमयनलों की जांच की गयी हो।

(12) संयंत्र की जांच – नवद्युि अपघटन संयंत्र ििा गैस होल्डर और कंप्रेशर के प्रत्येक र्ाग की जांच और मरम्मि का ननयनमि नशड्यूल होना चानहये और पायी गयी

नकसी र्ी त्रुनट को ठीक नकया जाना चानहये।

अनुसूची - XIV

मुक्त भसभिका युक्त पत्र्थर या भकसी अन्य सामग्री का पररचािन

1. अनुप्रयोर् – यह अनुसूची उन सर्ी कारखानों या कारखानों के नहस्सों पर लागू होगी नजनमें मुि नसनलका युि पत्िर या नकसी अन्य सामग्री का पररचालन नकया

जािा है।

2. पररिाषाएं – इस अनुसूची के प्रयोजनों के भिये –

(क) “पररचािन” का अिय मुि नसनलका युि पत्िर या नकसी अन्य सामग्री को िोडने, चूर्य करने, नचनपंग, ड्रेनसंग, पीसने, छानने, नमलाने, ग्रेनडंग या हैंडनलंग से है या

इस प्रकार के पत्िर या अन्य सामग्री से जुडे नकसी अन्य प्रचालन से है।

82

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(ख) “नसनलका युि पत्िर या नकसी अन्य सामग्री” नकसी ऐसे पत्िर या अन्य ठोस सामग्री से है नजसमें मुि नसनलका के र्ार का कम से कम 5% नमला हो।

3. पररचािन में सािधानी – नकसी र्ी कारखाने या कारखाने के नहस्से में िब िक कोई पररचालन नहीं नकया जा सकिा जबिक ननम्ननलनखि उपायों में कोई एक या

अनधक अपनाया नहीं जािा –

(क) प्रसंस्कृि नकये जा रहे पत्िर या अन्य सामग्री को नर्ंगोना

(ख) पानी का नछडकाव करना

(ग) प्रनियाओं को संलग्न करना

(घ) प्रनियाओं को अलग अलग करना, और

(ङ) अपेभित स्र्थिों पर समुभचत भनकासी और िायु संचरण व्यिस्र्था करना – यह व्यवस्िा कारखाने में काम कर रहे लोगों की सुरक्षा के उद्देश्य से धूल के प्रर्ावी

ननयंत्रर् के नलये आवश्यक है। नसनलका धूल का स्िर, नवननयम 131 में संलग्न िानलका 2 में नननियष्ट अनधकिम अनुमनि योग्य स्िर के बराबर या नीचे रखा जाना है।

परन्‍िु, यह उपबंनधि है नक यनि पररचालन या प्रनिया अपने आप में ऐसी है नक उत्पन्न और मौजूि धूल का स्िर उपरोि अनुमनि योग्य स्िर से अनधक नहीं है िो उि

उपाय अपनाना आवश्यक नहीं है।

4. फशग का रखरखाि –

(1) सर्ी फशय या वो स्िान जहां बारीक धूल के जमने की संर्ावना होिी है और जहां नकसी र्ी व्यनि को काम करना होिा है या गुजरना होिा है, उन्हें ऐसी नस्िनि में

रखा जाना चानहये नक नमी नवनध से या नकसी अन्य नवनध से उनकी अच्छी िरह सफाई हो सके िानक सफाई की प्रनिया में धूल उडकर हवा में न नमलने पाये।

(2) प्रत्येक कायय कक्ष के हर फशय की सिह या वह स्िल जहां कायय ननष्ट्पानिि हो रहा है या जहां से नकसी र्ी व्यनि को अपने काम के िौरान गुजरना पडिा है, उसकी

प्रत्येक नश्ट में कम से कम एक बार पानी नछडक कर या नकसी अन्य समुनचि नवनध से साफ की जानी है िानक सफाई के िम में धूल उडकर हवा में नमलने न पाये।

5. भकशोरों से संबंभधत भनषेध – पररचालन से जुडी नकसी र्ी गनिनवनध में या नकसी ऐसे स्िल पर जहां ऐसी गनिनवनधयां संचानलि होिी हैं नकसी र्ी नकशोर को काम

करने की अनुमनि नहीं है।

6. भचभकत्सा अभधकारी द्वारा भचभकत्सा जांच –

(1) पैराग्राफ 1 में नननियष्ट प्रनियाओं में काययरि प्रत्येक कमी की स्वास््य जांच उसकी पहली िैनािी के 15 निन के र्ीिर नचनकत्सा अनधकारी द्वारा की जायेगी। ऐसी

नचनकत्सा जांच में मूत्र और रि में सीसे की जांच शानमल है। मूत्र में एएलए, हीमोग्लोनबन स्िर, कोनशकाओं की नस्टपनलंग ििा दृढिा और संिुलन की जांच शानमल है।

नकसी र्ी कामगार को अपनी पहली ज्वायननंग के 15 के बाि काम करने की अनुमनि नहीं होगी, जबिक नक उसे नचनकत्सा अनधकारी द्वारा ऐसे काम के नलये नफट

प्रमानर्ि नहीं नकया जािा है।

(2) ऐसी प्रनियाओं में काययरि प्रत्येक कमी को प्रत्येक 12 महीने में कम से कम एक बार पुनिः स्वास््य जांच करानी होगी। ऐसे पुनिः परीक्षर् में, जैसा र्ी नचनकत्सा

अनधकारी उनचि मानिे हों, उप पैरा (1) में नननियष्ट सर्ी जांच शानमल होंगी, केवल छािी के एक्ट्स-रे को छोडकर, जो िीन वर्य में एक बार होगा।

(3) नचनकत्सा अनधकारी कामगार की जांच के बाि फॉमय 24 में नफटनेस प्रमार्पत्र जारी करेंगे। परीक्षर् और पुन: परीक्षर् का ररकॉडय प्रमार्पत्र में िजय नकया जाएगा और

यह प्रमार्पत्र कारखाने के अनधर्ोगी की सुरक्षा में रखा जाएगा। उप-पैराग्राफ (1) और (2) के अंिगयि की गई प्रत्येक जाँच का ररकॉडय, जाँच की प्रकृनि और पररर्ाम

सनहि, नचनकत्सा अनधकारी द्वारा फॉमय-25 में स्वास््य पंनजका में र्ी िजय नकया जाएगा।

(4) स्वास््य प्रमार्पत्र और स्वास््य पंनजका ननरीक्षक-सह-सुनवधाप्रिािा के ननरीक्षर् के नलए उपलब्ध रखे जाएँगे।

(5) यनि नचनकत्सा अनधकारी की राय में कोई कमयचारी नकसी र्ी समय इस प्रनिया में काम के नलए अब उपयुि नहीं रह गया है, और इसमें बने रहने से उसके स्वास््य

को खिरा हो सकिा है, िो वह प्रमार्पत्र और स्वास््य पंनजका में अपने ननष्ट्कर्ों का ररकॉडय िजय करेगा। इस प्रनवनष्ट में वह अवनध र्ी िजय होनी चानहए नजसमें वह कमयचारी

को उस काम के नलये अयोग्य मानिा है। प्रनिया से हटाय़े गये व्यनि को वैकनल्पक प्लेसमेंट निया जायेगा, जब िक नक नचनकत्सा अनधकारी की राय में उसे पूरी िरह

अक्षम न माना जाए, ऐसा होने पर उसका समुनचि पुनवायस नकया जायेगा।

(6) उपरोि उप पैराग्राफ (5) के िहि काम के नलये अननफट पाये गये नकसी र्ी व्यनि को िबिक नफर से काम पर नहीं रखा जायेगा या उि प्रनियाओं में काम करने

की अनुमनि नहीं िी जायेगी जबिक नक नचनकत्सा अनधकारी आगे परीक्षर् के बाि नफर से उसे उन प्रनियाओं में काम करने के नलये नफट प्रमानर्ि नहीं कर िेिे।

8. छूट – यनि नकसी र्ी कारखाने के संिर्य में मुख्य ननरीक्षक सह सुनवधा प्रिािा इस बाि को लेकर संिुष्ट होिे हैं नक नकसी र्ी नवनशष्ट पररनस्िनि के कारर् या प्रनियाओं

[PART IV

DELHI GAZETTE : EXTRAORDINARY

83

की बारंबरिा के कारर् या नकसी अन्य कारर् से इस अनुसूची के सर्ी या कोई प्रावधान फैक्ट्री में कनमयों की सुरक्षा के नलये आवश्यक नहीं हैं िो वे नलनखि में एक

प्रमार्पत्र के द्वारा, अपने नववेकानधकार से नकसी र्ी समय ऐसी फैक्ट्री को,ऐसी नस्िनियों के अधीन, नजसे वे प्रमार्पत्र में नननियष्ट करेंगे, सर्ी या नकसी एक प्रावधान से

छूट िे सकिे हैं।

..........................

अनुसूची – XV

एस्बेस्टस की हैंडभिंर् और प्रोसेभसंर्, एस्बेस्टस की भकसी सामग्री का भिभनमागण,

तर्था भिभनमागण की कोई अन्य प्रभिया या भजसमें भकसी िी रूप में

एस्बेस्टस का उपयोर् होता है

1.

अनुप्रयोर् – यह अनुसूची सर्ी कारखानों पर या कारखानों के नहस्सों पर, नजनमें ननम्ननलनखि में से कोई र्ी प्रनिया पररचानलि होिी हो, लागू होगीिः-

(क) एस्बेस्टस को िोडना, बारीक करना, अलग अलग करना, खोलना, पीसना, नमलाना या छानना ििा इसकी हैंडनलंग और पररचालन से जुडी अन्य प्रनियाएं शानमल

हैं;

(ख) एस्बेस्टस के रेशों से बुने वस्त्र बनाने की सर्ी प्रनियाएं, िैयारी और नफनननशंग प्रनिया सनहि;

(ग) पूर्य रूप से या आंनशक रूप से एस्बेस्टस से बने इंसुलेशन स्लैब या सेक्ट्शन का ननमायर्, , और इससे संबंनधि प्रनियाएं;

(घ) पूर्य रूप से या आंनशक रूप से एस्बेस्टस से बने इंसुलेशन वाले गद्दे बनाना या इनकी मरम्मि करना ििा संबंनधि प्रनियाएं;

(ङ) एस्बेस्टस काडयबोडय और पेपर का ननमायर्;

(च) स्प्रे नवनध से एस्बेस्टस का अनुप्रयोग;

(छ) एस्बेस्टस से पूरी िरह या आंनशक रूप से बनी शुष्ट्क सामग्री को चीरना, पीसना, पलटना, अपघनटि करना और पॉनलश करना;

(ज) एस्बेस्टस धूल एकत्र करने के नलये नकसी कमरे, वेसल, चैम्बर, नफक्ट्स्चर या उपकरर्ों की सफाई;

(झ) अन्य प्रनियाएं नजनसे एस्बेस्टस धूल काम करने के स्िान में आ जािी है।

2. पररिाषा – इस अनुसूची के उद्देश्य के नलये

(क) “एस्बेस्टस” का अिय है एक प्रकार का रेशेिार नसनलकेट खननज और कोई अवनमश्रर् नजसमें एनक्ट्टनोलाइट, एमोसाइट, एंिोफायलाइट, निसोटाइल, िोनसडोलाइट,

रेमोलाइट हो, या इनका नमश्रर् हो चाहे कच्ची अवस्िा में, नपसी हुई या खुली;

(ख) “एस्बेस्टस टेक्ट्स्टाइल्स” का अिय है एस्बेस्टस से बना धागा या कपडा या नकसी अन्य सामग्री के साि एस्बेस्टस का नमश्रर्;

(ग) “अप्रूव्ड“ का अर्ग है मुख्य तनरीक्षक सह सुवविाप्रदाता द्वारा उस समय के शलये शलखखत में स्वीकृत;

(घ) “श्वसन उपकरण“ का अर्ग है आवश्यक कनेक्शन के सार् एक हेलमेट या फेस पीस जजसका उपयोग

कर कोई व्यजक्त िूल रहहत हवा सांस में ले सकता है या कोई अन्य अनुमोहदत उपकरण;

84

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(ङ) “एफफशशयेंट एग्जॉस्ट ड्रैफ्ट यानी प्रभावी तनकास खखंचाव“ का अर्ग है िूल हटाने के शलये यांत्रत्रक सािनों

से स्र्ानीय वायु संचरण की व्यवस्र्ा, ताफक िूल को जहां काम हो रहा है वहां की हवा में जाने से रोका जा

सके। कोई भी खखंचाव प्रभावी नहीं माना जा सकता यहद वह िूल को उत्पन्न होने की जगह पर तनयंत्रत्रत

करने में ववफल हो;

(च) “तैयारी“ यानी एस्बेस्टस को खोलने के शलये क्रशशंग, अलग करना और संबंधित अन्य प्रफक्रयाएं

(छ) “सुरक्षा वस्त्र“ यानी पूरे शरीर और शसर को ढंकने का कपडा, जजसे पहनने पर एस्बेस्टस िूल से बचा

जा सकेगा;

3. यंत्र और उपकरण – इस अनुसूची के तहत आने वाली प्रफक्रयाओं में प्रयुक्त होने वाले यंत्र और उपकरण

ऐसे होने होने चाहहये जो स्वीकृत सीमा से उपर एस्बेस्टस िूल उत्पन्न न करें और प्रभावी तनकास खखंचाव

क्षमता से युक्त हों।

4. एग्जॉस्ट ड्रैफ्ट यानी ननकास ख ंचाव यंत्र –

(1) तनम्नशलखखत प्रफक्रयाओं और मशीनों से िूल को तनयंत्रत्रत करने के शलये एक प्रभावी एग्जॉस्ट ड्रैफ्ट

व्यवस्र्ा उपलब्ि करायी जायेगी और प्रबंधित की जायेगीीः-

(क) ववतनमागण और संवहन मशीनें यानी –

(i) तैयारी, वपसाई और शुष्क शमश्रण मशीनें;

(ii) कार्डिंग, काडग कचरा और ररंग जस्पतनंग मशीने, तर्ा करघे;

(iii) एस्बेस्टस पररचाशलत मशीनें और अन्य संयंत्र;

(iv) एस्बेस्टस से पूरी तरह या आंशशक रूप से बनी वस्तुओं की शुष्क अवस्र्ा में कटाई, वपसाई, पलटाव,

र्ड्रशलंग, अपघटन या पॉशलशशंग में इस्तेमाल होने वाली मशीनें;

(ख) कानडिंग मशीन के नसलेंडर या अन्य र्ागों की सफाई और नघसाई;

(ग) चैंबसय, हॉपसय या अन्य संरचना नजससे होकर खुला एस्बेस्टस र्ेजा जािा है या गुजरिा है;

(घ) हाि से एस्बेस्टस कचरे की छंटाई या अन्य पररचालन के नलये बेंच;

(ङ) काययस्िल, जहां हाि के संपकय से बोररयों या अन्य कंटेनर को र्रने या खाली करने, िोलने या अन्य प्रनियाएं की जािी हैं;

(च) बोररयों को साफ करने की मशीन;

(छ) हाि से एस्बेस्टस को नमलाना और नमनश्रि करना; और

(ज) कोई अन्य प्रनिया नजससे धूल कायय स्िल िक फैल जािा है।

(2) उप पैराग्राफ (1) के िहि उपलब्ध कराया गया ननकासी वायु संचरर्, मशीनों, उपकरर्ों या अन्य संयंत्रों के रखरखाव या मरम्मि कायय के िौरान उपयोग में लाया

जाना चानहये नजससे ननकासी का नखंचाव उत्पन्न हो और नकसी र्ी कायय स्िल की हवा में एस्बेस्टस धूल का प्रवेश रोका जा सके।

(3) ननकासी यंत्र से ननकलने वाली एस्बेस्टस धूल को नकसी र्ी कायय कक्ष की हवा में फैलने से रोकने के नलये प्रबंध नकये जाना है।

(4) ननकासी प्रर्ाली के जररये नकसी र्ी काययकक्ष से हटायी गयी एस्बेस्टस धूल को समुनचि ग्राहक पात्र या नफल्टर बैग में एकत्र नकया जायेगा और इसे सर्ी काययस्िलों

से हटा निया जायेगा।

[PART IV

DELHI GAZETTE : EXTRAORDINARY

85

5. िायु संचरण प्रणाभियों की जांच और परीिण-

(1) इस अनुसूची द्वारा अपेक्षक्षत िूल तनकालने या दबाने के उद्देश्य से उपयोग में लायी जाने वाली सभी

वायु संचरण प्रणाशलयों की जांच और परीक्षण जजम्मेदार व्यजक्त द्वारा सप्ताह मे एक बार अवश्य होना

चाहहये। 12 महीने में एक बार एक सक्षम व्यजक्त द्वारा समग्र रूप से इसका परीक्षण फकया जाना होगा।

इन परीक्षणों द्वारा सामने आने वाली फकसी भी त्रुहट को ठीक फकया जाना चाहहये।

(2) ऐसी जांच और परीक्षणों का सारा वववरण फॉमग नं 26 में रखा जाना चाहहये।

6. कुछ प्रक्रियाओं को अलग अलग करना – एस्बेस्टस को हार् से शमलाना और शमश्रण बनाना, या पूरी तरह

या आंशशक रूप से एस्बेस्टस से इंसुलेहटंग गद्दे बनाने या मरम्मत करने का काम फकसी ऐसे कमरे में नहीं

होना चाहहये जहां कोई अन्य काम होता हो।

7. भुरभुरे एस्बेस्टस का भंडारण और ववतरण –

सभी भुरभुरे एस्बेस्टस को उपयोग में न आने की अवधि के दौरान समुधचत बंद बॉक्स में रखा जाना चाहहये

जजससे एस्बेस्टस की िूल बाहर तनकलने न पाये और ऐसे एस्बेस्टस को समुधचत बंद पात्र के त्रबना फैक्री

में ववतररत नहीं फकया जाना चाहहये या पूरी तरह बंद व्यवस्र्ा में ही इिर से उिर ले जाना चाहहये।

8. एस्बेस्टस की बोररयां –

(1) फैक्री के अंदर एस्बेस्टस लान ले जाने के शलये कंटेनर के रूप में इस्तेमाल की जाने वाली सभी बोररयां

अभेद्य सामग्री से बनी होनी चाहहये और इन्हें हमेशा अच्छी हालत में होना चाहहये।

(2) पैराग्राफ 4 के अनुपालन में, जजस बोरी में एस्बेस्टस रखा जाता हो उसे कभी हार् से फटक कर साफ

नहीं करना चाहहये बजल्क मशीन से इसकी सफाई होनी चाहहये।

9. फशा और काया स्र्ल का प्रबंधन-

(1) फकसी भी कमरे में जहां इस अनुसूची की अपेक्षाएं लागू की जाती हैं—

(क) फशग, काम में आने वाली बेंच, मशीनरी और संयंत्र त्रबल्कुल साफ और एस्बेस्टस के कचरे से मुक्त रखे

जाने चाहहये और तुरंत काम में नहीं आने वाले एस्बेस्टस को रखने की समुधचत व्यवस्र्ा की जानी चाहहये।

और

(ख) फशग पर ऐसी कोई भी सामग्री, संयंत्र और वस्तुएं न रखी हो, जजसकी तत्काल जरूरत न पडने वाली हो,

इससे कमरे की समुधचत सफाई हो सकेगी।

(2) जैसा फक उप-ववतनयम (1) में उजल्लखखत है, सफाई जहां तक व्यवहायग हो, ऐसे वैक्यूम क्लीतनंग उपकरण

से होनी चाहहये जजसे इस तरह र्डजाइन और बनाया गया हो फक एस्बेस्टस िूल न तो छूटने पाये और न ही

यह फकसी कायग स्र्ल की हवा में फैले।

86

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(3) जब सफाई उप-पैराग्राफ (2) में उजल्लखखत ववधि के अलावा फकसी अन्य ववधि से हो रही हो तो सफाई

करने वाले व्यजक्त को और उस कमरे में काम कर रहे अन्य व्यजक्तयों को श्वसन सुरक्षा उपकरण और

सुरक्षात्मक वस्त्र उपलब्ि कराये जायें।

(4) उप-पैराग्राफ (2) के प्राविानों के अनुसार उपयोग में शलये गये वैक्यूम क्लीतनंग उपकरण का समुधचत

रखरखाव होना चाहहये और प्रत्येक इस्तेमाल के बाद इसकी सतहों को अच्छी तरह साफ कर लेना चाहहये

तर्ा एस्बेस्टस कचरे और िूल मे मुक्त कर लेना चाहहये।

(5) एस्बेस्टस कचरा, शशफ्ट समाप्त हो जाने के बाद कायग स्र्ल की फशग पर और अन्य स्र्लों पर पडा न

रहे। इसे त्रबना फकसी देरी के समुधचत स्र्ानो पर भेज हदया जाना चाहहये। काम के दौरान एस्बेस्टन कचरा

तछटकने पर त्रबना ववलंब फकये उसे तुरंत हटा हदया जाना चाहहये और इस उद्देश्य से रखे गये डब्बे में डाल

हदया जाना चाहहये।

10.

श्वसन यंत्र और सुरक्षात्मक वस्त्र

(1) तनम् नांफकत कायो में लगे प्रत्येक कमी के शलये अनुमोहदत श्वसन उपकरण और सुरक्षात्मक वस्त्र उपलब्ि

कराये जायें और इन्हें अच्छी जस्र्तत में रखा जाये –

(क) भुरभुरे एस्बेस्टस वाले चैंबसग में;

(ख) उपकरणों की साफ-सफाई, िूल हटाने या फफल्टररंग चैंबसग में;

(ग) हार् के झटकों से डेफर शसलेंडर सहहत शसलेंडरों और अकार्डिंग मशीन के अन्य हहस्सों की साफ-सफाई

में;

(घ) इंसुलेहटंग गद्दे बनाने या इनकी मरम्मत के दौरान भराई, पीटने या बराबर करने की प्रफक्रया में; और

(ङ) फकसी भी अन्य प्रचालन या पररजस्र्ततयों में जजसमें कायग स्र्ल की हवा में एस्बेस्टस िूल को स्वीकृत

सीमा के अंदर तनयंत्रत्रत करने में तकनीकी सािन अपनाना अव्यवहाररक हो जाता है।

(2) कशमगयों को तनयमानुसार हदये गये श्वसन उपकरण और सुरक्षात्मक वस्त पहनने और उतारने तर्ा

उपयोग के बाद रखने के शलये समुधचत और सुवविाजनक स्र्ान उपलब्ि कराया जायेगा।

(3) सभी श्वसन उपकरण और सुरक्षात्मक वस्त्र, जो उपयोग में नहीं हैं, िुलाई के शलये उपरोक्त उपतनयम

(2) के अनुसार उपलब्ि कराये गये स्र्ान में एकत्र फकये जायेंगे।

(4) उपयोग में आ रहे सभी सुरक्षा वस्त्रों की िूल सक्षम तनकासी खखंचाव यंत्र से या वैक्यूम क्लीतनंग से

हटायी जायेगी और उधचत अंतराल पर उनकी िुलाई होगी। सफाई का शशड्यूल और प्रफक्रया इस प्रकार होगी

जजससे पहनने वाले की प्रभावी सुरक्षा सुतनजश्चत होगी।

[PART IV

DELHI GAZETTE : EXTRAORDINARY

87

(5) सभी श्वसन उपकरणों को समुधचत अंतराल पर साफ और संक्रमण मुक्त फकया जायेगा और एक उत्तरदायी

व्यजक्त द्वारा प्रत्येक महीने में एक बार इनकी समग्र जांच होगी।

(6) सफाई और रखरखाव तर्ा श्वसन उपकरणों की जस्र्तत का ररकॉडग इस उद्देश्य के शलये दी गयी पंजजका

में रखा जायेगा। तनरीक्षक सह सुवविाप्रदाता के तनरीक्षण के समय इसे उपलब्ि कराया जायेगा।

(7)

फकसी भी व्यजक्त को सब-पैरा (1) में तनहदगष्ट उस कायग के शलये, जजसके शलये शवसन यंत्र

अतनवायग है, तबतक नहीं लगाया जायेगा जबतक फक उसे इस उपकरण के समुधचत उपयोग में पूरी तरह से

प्रशशक्षक्षत न कर हदया जाये।

(8) उपपैराग्राफ (1) के अनुपालन में कोई भी श्वसन यंत्र जो फकसी व्यजक्त द्वारा इस्तेमाल में आ चुका हो,

फकसी अन्य के द्वारा तब तक उपयोग नहीं फकया जायेगा जब तक फक उसे अंततम उपयोग के बाद अच्छी

तरह साफ और संक्रमण मुक्त नहीं कर शलया गया हो और संबंधित व्यजक्त को इसके समुधचत उपयोग के

बारे में अच्छी तरह प्रशशक्षक्षत न कर हदया गया हो।

11.

ननजी वस्त्रों को र ने के ललये पृर्क स्र्ान – संबंधित प्रचालन में लगे सभी व्यजक्तयों को जजसपर

यह अनुसूची लागू होती है, अपने तनजी वस्त्र रखने के शलये एक पृर्क सुवविाजनक स्र्ान उपलब्ि कराया

जायेगा। यह स्र्ान पैरा 10 के उप पैराग्राफ 2 के तहत उपलब्ि कराये गये स्र्ान से अलग होना चाहहये

ताफक तनजी वस्त्रों को फकसी संक्रमण से बचाया जा सके।

12.

धुलाई और स्नान की सुववधाएं

(1) अनुसूची के तहत आने वाली प्रफक्रयाओं में लगे कशमगयों के उपयोग के शलये िुलाई और स्नान का साफ-

स्वच्छ और व्यवजस्र्त, तर्ा पानी की लगातार आपूततग वाला स्र्ान हदया जाना चाहहये और उसका समुधचत

रखरखाव होना चाहहये। यह व्यवस्र्ा एक समय में 15 कशमगयों के उपयोग योग्य पयागप्त स्र्ान वाली

होनी चाहहये। इसमें कम से कम एक मीटर के अंतराल पर स्टैंड पाइप लगे होने चाहहये।

(2) कुल िुलाई स्र्लों की कम से कम आिी संख्या बार्रूम सुवविा के सार् होनी चाहहये।

(3) उपयुक्त सामग्री से बने साफ स्वच्छ तौशलयों की पयागप्त आपूततग सुतनजश्चत की जानी चाहहये। ऐसे तौशलये

प्रत्येक कमी को अलग अलग हदये जाने चाहहये, यहद तनरीक्षक सह सुवविाप्रदाता ऐसा आदेश देते हैं।

(4) साबुन और नाखून साफ करने के ब्रश की भी पयागप्त आपूततग रहनी चाहहये।

13.

िोजन किः-

(1) इस अनुसूची के िहि आने वाले फैक्ट्ररी में काम कर रहे सर्ी कनमयों ििा नवश्राम अवनध के िौरान पररसर में उपनस्िि शेर् कनमयों के उपयोग के नलये

समुनचि र्ोजनालय की व्यवस्िा होनी चानहये, नजसमें ये सुनवधाएं उपलब्ध हों –

88

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(क) पयायप्त संख्या में मेज और पीठ टेकने की सुनवधा के साि कुनसयां या बेंच;

(ख) खाना गमय करने के पयायप्त साधन; और

(2) र्ोजनालय स्वच्छ रखा जाना चानहये और इसका प्रबंधन नकसी नजम्मेिार व्यनि के हािों मे होना चानहये।

14.

भकशोरों को काम पर िर्ाने पर पाबंिी – इस अनुसूची के िहि आने वाली नकसी र्ी प्रनियां में नकसी र्ी नकशोर को नहीं लगाया जाना चानहये।

15.

धूम्रपान संबंधी भनषेध – इस अनुसूची के िहि आने वाली प्रनियाएं जहां पररचानलि होिी हैं, वहां नकसी र्ी व्यनि को धूम्रपान करने की अनुमनि नहीं

है। अनधकांश कमयचाररयों को समझ में आने वाली र्ार्ा में धूम्रपान ननर्ेध संबंधी नोनटस संयंत्र में नचपकाया जायेगा।

16.

चेतािनी नोभटस –

(1) प्रत्येक एस्बेस्टस प्रसंस्करर् क्षेत्र के प्रवेश और चारों ओर ननम्ननलनखि के बारे में सर्ी लोगों को सिकय करिे हुए चेिावनी नोनटस लगाये जायेंगेिः-

(क) एस्बेस्टस धूल से स्वास््य को होने वाली हानन,

(ख) समुनचि सुरक्षा उपकरर्ों के उपयोग की आवश्यकिा,

(ग) अननधकृि व्यनियों या नबना सुरक्षा उपकरर् के अनधकृि व्यनियों के प्रवेश पर पाबंिी

(2) ऐसे नोनटस अनधकांश कनमयों को समझ में आने वाली र्ार्ा में होनी चानहये।

17.

हिा की र्ुणित्ता की भनर्रानी- ननयंत्रर् उपायों की प्रर्ावकाररिा सुनननिि करने के नलये हवा में एस्बेस्टस रेशे की ननगरानी प्रत्येक नश्ट में कम से

कम एक बार अवश्य होनी चानहये और प्राप्त पररर्ामों का ररकॉडय, इस उद्देश्य से नवशेर् रूप से रखी गयी पंनजका में िजय होना चानहये।

18.

भचभकत्सा अभधकारी द्वारा भचभकत्सा जांच –

i. पैरा 1 के िहि उनल्लनखि नकसी र्ी प्रनिया में काम करने वाले प्रत्येक कमी की नचनकत्सा जांच, उसकी पहली ननयुनि के 15 निन के अंिर नचनकत्सा

अनधकारी द्वारा की जायेगी। इस जांच में फेफडे की जांच, बलगम में एस्बेस्टस रेशों का पिा लगाने के नलये जांच, और छािी का एक्ट्स-रे शानमल है। नकसी र्ी

कामगार को कारखाने में उसकी पहली ननयुनि के पंद्रह निन बाि, िबिक काम करने की अनुमनि नहीं होगी, जबिक उसे नचनकत्सा अनधकारी द्वारा ऐसे काम के नलये

नफट प्रमानर्ि न कर निया जाये।

ii. उप-पैराग्राफ (1) के िहि शानमल नकसी र्ी प्रनिया में काययरि सर्ी कनमयों की प्रत्येक 12 महीने में एक बार नचनकत्सा अनधकारी द्वारा जाँच की

जाएगी। पैरा 3 के शेर् उप-पैराग्राफ में उनल्लनखि नकसी र्ी अन्य प्रनिया में काययरि कनमयों की प्रत्येक 12 महीने में एक बार नचनकत्सा अनधकारी द्वारा जाँच की

जाएगी। सर्ी श्रनमकों के नलये ऐसी जाँचों में, नचनकत्सा अनधकारी के उनचि मानने पर उप-पैराग्राफ (1) में नननियष्ट सर्ी परीक्षर् शानमल होंगे, नसवाय छािी के एक्ट्स-

रे के, जो 3 वर्य में एक बार होगा।

iii.

नकसी कमयचारी की जाँच के बाि, नचनकत्सा अनधकारी, फॉमय-24 में स्वास््य प्रमार्पत्र जारी करेंगे। परीक्षर् और पुन: परीक्षर् का ररकॉडय

[PART IV

DELHI GAZETTE : EXTRAORDINARY

89

प्रमार्पत्र में िजय नकया जाएगा और यह प्रमार्पत्र कारखाने के अनधर्ोगी की सुरक्षा में रखा जाएगा। उप-पैराग्राफ (1) और (2) के अंिगयि की गई प्रत्येक जाँच का

ररकॉडय, जाँच की प्रकृनि और पररर्ाम सनहि, नचनकत्सा अनधकारी द्वारा फॉमय-05 में स्वास््य पंनजका में र्ी िजय नकया जाएगा।

iv. स्वास््य प्रमार्पत्र और स्वास््य पंनजका ननरीक्षक-सह-सुनवधाप्रिािा के ननरीक्षर् के नलए उपलब्ध रखे जाएँगे।

v. यनि नचनकत्सा अनधकारी की राय में कोई कमयचारी नकसी र्ी समय इस प्रनिया में काम के नलए अब उपयुि नहीं रह गया है, और इसमें बने रहने से

उसके स्वास््य को खिरा हो सकिा है, िो वह प्रमार्पत्र और स्वास््य पंनजका में अपने ननष्ट्कर्ों का ररकॉडय िजय करेगा। इस प्रनवनष्ट में वह अवनध र्ी िजय होनी चानहए

नजसमें वह कमयचारी को उस काम के नलये अयोग्य मानिा है। प्रनिया से हटाय़े गये व्यनि को वैकनल्पक प्लेसमेंट सुनवधाएं िी जायेगी, जब िक नक नचनकत्सा

अनधकारी की राय में उसे पूरी िरह अक्षम न माना जाए, ऐसा होने पर उसका समुनचि पुनवायस नकया जायेगा।

vi. उपरोि उप पैराग्राफ (v) के िहि काम के नलये अननफट पाये गये नकसी र्ी व्यनि को िबिक नफर से काम पर नहीं रखा जायेगा या उि प्रनियाओं

में काम करने की अनुमनि नहीं िी जायेगी जबिक नक नचनकत्सा अनधकारी आगे परीक्षर् के बाि नफर से उसे उन प्रनियाओं में काम करने के नलये नफट प्रमानर्ि नहीं

कर िेिे।

19.

छूटः- यहद मुख्य तनरीक्षक सह सुवविाप्रदाता फकसी भी कारखाने के संदभग में इस बात को लेकर

संतुष्ट हों फक असािारण पररजस्र्ततयों या प्रफक्रयाओं के यदा कदा होने या फफर फकसी अन्य कारण से फैक्री

के कशमगयों की सुरक्षा के शलये इस अनुसूची के सभी या फकसी प्राविान का पालन आवश्यक नहीं है, तो वह

शलखखत रूप से फैक्री को सभी या फकसी प्राविान से छूट देते हुए प्रमाणपत्र दे सकते हैं, प्रमाणपत्र में छूट

का आिार तनहदगष्ट फकया जायेगा। यह प्रमाणपत्र मुख्य तनरीक्षक सह सुवविाप्रदाता द्वारा अपने वववेकाधिकार

से, फकसी भी समय, रद्द भी फकया सकता है।

...........

अनुसूची- XVI

कोरोभसि यानी संिारक पिार्थग की हैंडभिंर् या पररचािन

1. पररभाषा – इस अनुसूची के उद्देश्य के शलये –

(क) “कोरोशसव पररचालन” का अर्ग है फकसी फैक्री में फकसी भी कोरोशसव पदार्ग का तनमागण, भंडारण, संचालन,

प्रसंस्करण, पैफकंग या उपयोग; और

(ख) “कोरोशसव पदार्ग“ में सल्फ्यूररक अम्ल, नाइहरक अम्ल, हाइड्रोक्लोररक अम्ल, हाइड्रोफ्ल्यूयोररक अम्ल,

काबोशलक अम्ल, फॉस्फोररक अम्न, तरल क्लोरीन, तरल ब्रोमाइन, अमोतनया, सोर्डयम हाइड्रोक्साइड,

पोटाशशयम हाइड्रोक्साइड और इनका शमश्रण, तर्ा कोई अन्य पदार्ग जजसे सरकार आधिकाररक गजट

अधिसूचना से कोरोशसव तनहदगष्ट करती है, शाशमल है।

90

DELHI GAZETTE : EXTRAORDINARY

PART IV]

2. कायास्र्ल की फशा – फकसी फैक्री के प्रत्येक कायगकक्ष की फशग जजसपर कोरोशसव पदार्ग का पररचालन

होता है, इस प्रकार बनी होनी चाहहये फक उसपर संक्षारक पदार्ग जमा न होने पायें। ऐसी फशग की सतह

त्रबल्कुल धचकनी और साफ होनी चाहहये और सही जस्र्तत में रखी जानी चाहहये।

3. सुरक्षात्मक उपकरण – (क) अधिभोगी को कोरोशसव पदार्ों के पररचालन में लगे सभी व्यजक्तयों को, हार्

और पैरों के शलये सुरक्षात्मक कवर, उपयुक्त एप्रन, चेहरा ढक

शील्ड रसायनों से सुरक्षा के शलये चश्मे और श्वसन यंत्र उपलब्ि कराना होगा। उपकरण अच्छी तरह रखे

होने चाहहये, उन्हे फकसी अवशोवित रसायन के हातनकर प्रभावों से मुक्त कर साफ और स्वास््यकर जस्र्तत

में तर्ा संक्रमणमुक्त रखा जाना चाहहये। अधिभोगी आवश्यकता होने पर समुधचत सुरक्षात्मक क्रीम और

सामग्री भी उपलब्ि करायेंगे।

(ख)फकसी भी कोरोशसव प्रचालन में लगे व्यजक्त द्वारा सुरक्षात्मक उपकरण और अन्य तैयाररयों का उपयोग

सुतनजश्चत फकया जाना चाहहये।

4. पानी की सुववधा – जहां भी कोरोशसव पदार्ग का पररचालन हो रहा हो वहां उस स्र्ान के जजतना तनकट

संभव हो सके 210 सेंटीमीटर की उंचाई पर 1.25 सेंटीमीटर व्यास की पाइप से स्वच्छ पानी का स्रोत

उपलब्ि कराया जाना चाहहये। यह पाइप त्वररत सफक्रय होने वाले वॉल्व से जुडी होनी चाहहये ताफक फकसी

कमी को कोरोशसव पदार्ग से क्षतत पंहुचने की जस्र्तत में, उसके क्षततग्रस्त हहस्से को तुरंत पानी की लगातार

बौछार में डुबोया रखा जा सके। जब भी आवश्यक हो पानी की लगातार आपूततग सुतनजश्चत करने के शलये

न्यूनतम 210 सेंटीमीटर की लंबाई, 120 सेंटीमीटर की चौडाई और 60 सेंटीमीटर की ऊंचाई या मुख्य

तनरीक्षक सह सुवविाप्रदाता द्वारा अनुमोहदत आकार का भंडारण टैंक स्वच्छ पानी के स्रोत के पास

उपलब्ि कराना चाहहये।

5. चेतावनी नोटटस – तनम्नशलखखत फॉमग में और बहुसंख्य कशमगयों को समझ में आने वाली भािा में छपी

चेतावनी नोहटस उस स्र्ान के तनकट प्रमुखता से प्रदशशगत की जानी चाहहयै जहां कोरोशसव पदािग का

प्रचालन होता हो और जहां खंड 2 में उजल्लखखत कोई भी प्रफक्रया तनष्पाहदत की जाती हो, जहां से सभी

कमी आसानी से नोहटस को पढ़ सकें। यहद कोई कामगार तनरक्षर है तो उसे नोहटस की ववियवस्तु पूरी

सतकगता के सार् समझाने के प्रबंि फकये जाने चाहहये।

चेतावनी नोटटस

तरा

कोरोशसव पदार्ग से तेज जलन हो सकती है और इससे तनकलने वाली भाप गंभीर रूप से घातक सात्रबत

हो सकती है। शरीर के फकसी हहस्से के कोरोशसव पदार्ग के संपकग में आने पर तुरंत उस हहस्से पर कम से

कम 15 शमनट तक लगातार पानी डालना चाहहये।

जजतनी जल्दी हो सके धचफकत्सा सहायता लेनी चाहहये।

6. पररवहन – (1) कोरोशसव पदार्ग को कंटेनर या पाइप के त्रबना न तो कहीं भरना चाहहये और न ही इिर

उिर ले जाना चाहहये और जब उन्हें कंटेनर में ले जाना हो तब भी कंटेनर को मजबूत और पयागप्त क्षमता

वाले क्रेट्स में रखना चाहहये। (2) कोरोशसव के 11.5 लीटर या इससे अधिक क्षमता वाले कंटेनर को

समुधचत क्षमता के पात्र या क्रेट में रखकर रबर के पहहयों वाली रक से ले जाना चाहहये, ऐसा न हो पाने

[PART IV

DELHI GAZETTE : EXTRAORDINARY

91

पर एक से अधिक व्यजक्तयों द्वारा कमर से नीचे की उंचाई पर रखते हुए ले जाना चाहहये। (3) कोरोशसव

पदार्ग के कंटेनर पर समुधचत लेबल लगा होना चाहहये।

7. कोरोलसव के पररचालन के ललये उपकरण – (1) कोरोशसव का जार, कारबॉय और अन्य कंटेनर खाली करने

के शलये झुकाने और पंवपंग व्यवस्र्ा से उठाने की ववधि अपनायी जानी चाहहये। (2) कोरोसव पदािग को

कभी भी खुले हार्ों से तनकालना रखना नहीं चाहहये। इसके शलये स्कूप या अन्य सािनों का इस्तेमाल

होना चाहहये।

8. वॉल्व को ोलना – कोरोशसव पदार्ग के कंटेनर में लगे वॉल्व को बहुत ही साविानी से खोला जाना चाहहये।

यहद वे आराम से नहीं खुलते हैं जो उनपर जोर नहीं लगाना चाहहये। इस काम में अच्छी तरह प्रशशक्षक्षत

कामगार से ही वॉल्व खुलवाना चाहहये।

9. टैंक और स्स्टल इत्याटि की सफाई – (1) कोरोशसव रखने में इस्तेमाल होने वाले जस्टल्स या अन्य बडे

चैम्बर की सफाई के शलये लकडी या अन्य सामग्री से बने सािनों का उपयोग होना चाहहये ताफक आशसगनरेटेड

हाइड्रोजन (आसागइन) का बनना रोका जा सके। (2) सफाई या अन्य रखरखाव कायों के शलये चैंबर, टैंक,

कुंड, गड्ढे या अन्य तघरे और बंद स्र्ान में उतरने वाले कशमगयों की सुरक्षा के शलये संहहता की अनुसूची

II के तहत तनशमगत तनयमों के अनुसार हर संभव सतकगता बरती जानी आवश्यक है। (3) जहां भी संभव हो

ऐसे उपकरण के फकसी भी भाग, जजसमे कोरोशसव पदार्ग रखा गया हो, की मरम्मत से पहले, उसे उपयुक्त

ववधियों से उसमें धचपके कोरोशसव से मुक्त कर शलया जाना चाहहये।

10. भंडारण – (1) कोरोशसव पदार्ग को एक ही कमरे में अन्य रसायनों, जैसे टपेन्टाइन, काबागइड, िातु चूणग

और ज्वलनशील सामग्री के सार् नहीं रखा जाना चाहहये, क्योंफक दुघगटनावश फकसी रसायन के सार् शमल

जाने से घातक प्रततफक्रया हो सकती है तर्ा जहरीला िुंआ और गैस तनकल सकती है। (2) उपर रखी

टंफकयों, पात्रों, कुंड या अन्य कंटेनरों की पंवपंग या भरा जाना इस प्रकार व्यवजस्र्त होना चाहहये फक

कोरोशसव पदार्ग के ओवरफ्लो होने और फकसी को क्षतत पंहुचाने की संभावना न रहे। (3) 20 लीटर या

अधिक की क्षमता वाले प्रत्येक कंटेनर तर्ा कोरोशसव पदार्ग स्टोर करने वाले या ले जाने वाले प्रत्येक

पाइपलाईन, वॉल्व और फफहटंग की प्रत्येक विग पूरी तरह जांच होनी चाहहये ताफक कोई त्रुहट पाये जाने पर

उसे दूर फकया जा सके। ऐसे सभी परीक्षणों का ररकॉडग पंजजका में दजग फकया जाना चाहहये और जरूरत

पडने पर इसे तनरीक्षक सह सुवविाप्रदाता के समक्ष प्रस्तुत फकया जाना चाहहये।

11. अस्ग्नशमन यंत्र और आग पर काबू पाने वाले उपकरण – पयागप्त संख्या में समुधचत प्रकार के अजग्नशमन

यंत्र और अन्य संबंधित सामग्री उपलब्ि करायी जानी चाहहये। ऐसे यंत्रों और उपकरणों का तनयशमत

परीक्षण और रीफफशलंग होनी चाहहये। इनके उपयोग के बारे में स्पष्ट अनुदेश बहुसंख्य कशमगयों को समझ

आने वाली भािा में छाप कर अजग्नशमन यंत्रों और अन्य उपकरणों के पास लगा हदया जाना चाहहये।

12. छूट – फकसी भी कारखाने के संदभग में प्रबंिक द्वारा फकये गये उपायों पर यहद मुख्य तनरीक्षक सह

सुवविाप्रदाता संतुष्ट हैं फक असामान्य पररजस्र्ततयों के कारण या प्रफक्रयाओं में बारंबारता न होने के

कारण या फकसी भी अन्य वजह से, अनुसूची के सभी या फकसी प्राविान का अनुपालन वहां काम कर रहे

लोगों की सुरक्षा के शलये आवश्यक नहीं है, तो वे जस्र्तत ववशेि का उल्लेख करते हुए शलखखत प्रमाणपत्र

92

DELHI GAZETTE : EXTRAORDINARY

PART IV]

द्वारा, जजसे फकसी भी समय रद्द फकया जा सकता है, फैक्री को ऐसे प्राविानों के अनुपालन से छूट दे

सकते हैं।

.........................

अनुसूची –XVII

कार ानों में अवन और ड्रॉयर का उपयोग

1. अनुप्रयोग- यह अनुसूची फकसी प्रततष्ठान की प्रयोगशालाओं और फकचेन में इस्तेमाल होने वाले और 325

लीटर क्षमता से कम के अवन और ड्रॉयर को छोडकर, अन्य अवन और ड्रॉयर पर लागू होगी।

2. पररभाषा – इस अनुसूची के प्रयोजन के शलये अवन और ड्रॉयर का अर्ग है एक बंद, ग्राही, कंपाटगमेंट या

बॉक्स वाली संरचना जजसका उपयोग अवन या ड्रॉयर वाले कमरे में पररवेशी वायु के तापमान से अधिक

तापमान पर फकसी वस्तु या पदार्ग की बेफकंग, सुखाने या अन्य प्रसंस्करण के शलये होता है। और जजसमें

इस प्रफक्रया के दौरान वायु और ज्वलनशील पदार्ग से संयोग से दाहक और ववस्फोटक शमश्रण बन सकता

है।

3. पृर्क ववद्युत कनेक्शन – प्रत्येक अवन या ड्रॉयर के शलये त्रबजली आपूततग एक अलग जस्वच के सार्

उपलब्ि कराये गये पृर्क सफकगट से होना चाहहये।

4. डडजायन, ननमााण, परीक्षण और जांच – (1) प्रत्येक अवन और ड्रॉयर का र्डजायन कुशल और ठोस

अशभयांत्रत्रकी के आिार पर होना चाहहये तर्ा यह ठोस सामग्री से अच्छी तरह बना और मजबूत होना

चाहहये। इसे फकसी प्रत्यक्ष त्रुहट से मुक्त होना चाहहये और समुधचत उपयोग के दौरान सुरक्षक्षत होना

चाहहये।

(2) फकसी भी अवन या ड्रायर को सक्षम प्राधिकारी द्वारा सभी भागों की पूरी तरह जांच के बाद ही फैक्री में

पहली बार उपयोग में शलया जाना चाहहये। यह सुतनजश्चत करने के शलये जांच जरूरी है फक जजन प्रफक्रयाओं

में इसका उपयोग फकया जाना है उनके पररचालन के शलये सुरक्षात्मक दृजष्ट से सभी आवश्यक प्रणाशलयां

और तनयंत्रण उपलब्ि हैं। सक्षम प्राधिकारी से हस्ताक्षररत जांच और परीक्षण प्रमाणपत्र प्राप्त कर शलया

जाना चाहहये और तनरीक्षण के शलये उपलब्ि रखना चाहहये।

(3) अवन या ड्रॉयर के फकसी भी भाग में कोई बदलाव या मरम्मत का, जजसका फकसी भी र्डजायन पर असर

पडता हो, तबतक उपयोग नहीं फकया जायेगा जबतक फक खंड (ख) में उजल्लखखत परीक्षण और जांच सक्षम

व्यजक्त द्वारा न कर शलया गया हो और उसके हस्ताक्षर के सार् इस परीक्षण का प्रमाणपत्र तनरीक्षण के

शलये सुरक्षक्षत न रखा गया हो।

5. सुरक्षक्षत वायु संचरण प्रणाली – (1) प्रत्येक अवन या ड्रॉयर के सार् एक प्रभावी वायु संचरण प्रणाली होनी

चाहहये जजसमें एक या अधिक मोटर संचाशलत सेंहरफ्यूगल पंखों का उपयोग फकया गया हो ताफक वायु

और ज्वलनशील पदार्ग के फकसी शमश्रण को, जो अवन या ड्रॉयर में बन सकता है, तनुकृत फकया जा सके

और वायु में ज्वलनशील पदार्ग की सांद्रता सुरक्षक्षत स्तर पर रखी जा सके।

[PART IV

DELHI GAZETTE : EXTRAORDINARY

93

(2) खंड (क) में उजल्लखखत तनुकरण का सुरक्षक्षत स्तर ऐसा होना चाहहये ताफक वायु में संबंधित ज्वलनशील

पदार्ग की सांद्रता इसके तनम्नतर ववस्फोटक स्तर से 25 प्रततशत से अधिक न होीः

परन् तु, वायु में ज्वलनशील पदार्ग का सांद्रता-स्तर इसके तनम्न ववस्फोटक स्तर का 50 प्रततशत तक रखा

जा सकता है यहद एक स्वचाशलत यंत्र लगाया जाये और उसका रखरखाव फकया जाये जोीः-

(क)

लगातार अवन या ड्रॉयर में वतगमान हवा में दाहक पदार्ग की सांद्रता दशागता है;

(ख)

अवन या ड्रॉयर के फकसी भी भाग में हवा में दाहक पदार्ग की सांद्रता तनम्न ववस्फोटक सीमा के

50 प्रततशत के स्तर तक पंहुच जाने पर अलामग से सतकग कर देता है।

(ग) अवन या ड्रॉयर के फकसी भी भाग में हवा में दाहक पदार्ग की सांद्रता तनम्न ववस्फोटक सीमा के 60

प्रततशत के स्तर तक पंहुच जाने पर तापन प्रणाली को स्वचाशलत ढंग से बंद कर देता है। यह अवन या

ड्रॉयर के शलये उपलब्ि कराया जाता है और प्रभावी कायग जस्र्तत को प्रबंधित करता है।

(घ) कोई भी अवन या ड्रॉयर सुरक्षा वायु संचरण प्रणाली के प्रभावी ढंग से काम फकये त्रबना पररचाशलत नहीं

फकया जा सकता,

(ङ) कोई भी अवन या ड्रॉयर खंड (ख) में उजल्लखखत स्तर से कम तनुकरण स्तर पर पररचाशलत नहीं फकया

जा सकता,

(च) सुरक्षा वायु संचरण प्रणाली के तनकासी मागग इस तरह बने और व्यवजस्र्त होने चाहहये फक तनकासी

मागग वायु और ज्वलनशील पदार्ग के शमश्रण को कायग कक्ष से दूर कर दें तर्ा खखडफकयों, दरवाजों या

तनकास के तनकट न रहने दें जहां से यह कायगकक्ष में फफर प्रवेश कर सकें।

(छ) अवन या ड्रॉयर में वायु संचरण प्रणाली के माध्यम से आने वाली ताजा हवा सकुगलेहटंग फैन्स के जररये

अवन या ड्रॉयर के सभी भागों में समान रूप से फैलनी चाहहये ताफक यह सुतनजश्चत हो सके फक ऐसा

कोई स्र्ान नहीं है जहां दाहक पदार्ग हवा में खतरनाक र्डग्री तक एकत्र होने पाये।

(ज) फकसी भी सुरक्षा वायु संचरण प्रणाली में थ्रॉटशलंग डैंपसग इस तरह र्डजायन फकये जाने चाहहये फक

प्रणाली, अधिकतम थ्रॉटशलंग जस्र्तत में रखे जाने पर, सुरक्षा के शलये आवश्यक न्यूनतम संचरण दर

प्रबंधित कर सके।

6. ववस्फोट पैनल - (1) कम से कम आिा घन मीटर आंतररक क्षेत्रफल वाले प्रत्येक ओवन या ड्रायर में

उपयुक्त र्डजाइन वाला ववस्फोट पैनल लगाया जाएगा ताफक ओवन या ड्रायर के भीतर फकसी भी

संभाववत ववस्फोट का दबाव वेंट के माध्यम से मुक्त फकया जा सके।

फकसी भी प्रवेश द्वार का क्षेत्र, जजसमें ववस्फोट की जस्र्तत में दबाव के मुक्त होने की उपयुक्त व्यवस्र्ा हो,

ओवन या ड्रायर के आयतन के प्रत्येक 1 घन मीटर के शलए 2200 वगग सेमी से कम नहीं होना चाहहए।

94

DELHI GAZETTE : EXTRAORDINARY

PART IV]

ववस्फोट पैनल और दरवाजों का र्डजाइन ऐसा होना चाहहए फक 0.25 फकग्रा/वगग सेमी के आंतररक दबाव में

उनका पूरी तरह मुक्त होना सुतनजश्चत हो सके।

(2) ववस्फोट का दबाव मुक्त करने वाले पैनल, जजतना व्यवहायग हो सके, अवन या ड्रॉयर की उपरी सतह पर

होने चाहहये, या इसकी दीवारों के उन हहस्सों में होने चाहहये जो पररचालन के समय व्यजक्त के संपकग में

नहीं आते।

7.

इंटरलॉक्रकंग व्यवस्र्ा – प्रत्येक अवन या ड्रॉयर में इंटरलॉफकंग व्यवस्र्ा उपलब्ि करायी जानी

चाहहये और इसका रखरखाव होना चाहहये ताफक सुतनजश्चत फकया जा सके फकीः

(क)

सभी वेंहटलेशन फैन और सकुगलेहटंग फैन, जजनके काम न करने का प्रततकूल असर प्रवाह के वायु

संचरण दर पर प़डता है, त्रबना फकसी मेकैतनकल कन्वेयर के पहले से ही प्रचालन में हैं, जो अवन या

ड्रायर में प्रसंस्कृत फकये जाने वाले पदार्ग के शलये उपलब्ि कराये जाते हैं।

(ख)

फकसी भी वेंहटलेहटंग या सकुगलेहटंग फैन के काम न करने पर स्वतीः कन्वेयर बंद हो जायेगा,

जैसा खंड (क) में उजल्लखखत है। सार् ही वॉल्व के बंद होने से गमग हवा की आपूततग भी बंद हो जाती है।

गैस या तेल से संचाशलत अवन में इजग्नशन बंद कर दी जाती है और त्रबजली चाशलत अवन में त्रबजली

की आपूततग रोक दी जायेगी।

(ग) उपरोक्त यांत्रत्रक कन्वेयर, बंद वॉल्व को चालू करने से पहले ही पररचाशलत कर हदया जाता है।

(घ) यहद अवन और ड्रायर गैस, तेल या वाष्प से गमग होते हैं तो उपयुगक्त कन्वेयर के काम न करने से

वॉल्व स्वतीः बंद हो जायेगा और इजग्नशन प्रणाली को तनजष्क्रय कर देगा। ववद्युत चाशलत अवन के

मामले में हीटर को र्डसकनेक्ट कर देगा।

8. स्वचाललत वायु संचरण- तेल, गैस, भाप या त्रबजली से गमग होने वाले प्रत्येक अवन या ड्रायर स्वतीः

संचाशलत प्रभावी वायु संचरण व्यवस्र्ा के सार् उपलब्ि कराया जाना चाहहये जजसमें सेफ्टी वेंहटलेशन

फैन और सकुगलेहटंग फैन के पररचालन के सार् कम से कम तीन वॉल्यूम बदलाव की व्यवस्र्ा हो।

9.

तापमान ननयंत्रण – प्रत्येक अवन या ड्रायर ऐसी स्वचाशलत व्यवस्र्ा के सार् उपलब्ि कराया

जाना चाहहये जजससे यह सुतनजश्चत फकया जा सके फक तापमान प्रफक्रया ववशेि के संदभग में आवश्यक

अधिकतम तापमान से अधिक न होने पाये।

10.

बहु चरण की प्रक्रकयाएं – अवन या ड्रायर में जो भी सामग्री उत्तरोत्तर पररचालन में प्रसंस्कृत की

जानी है, उनके शलये समुधचत व्यवस्र्ा उपलब्ि करायी जानी चाहहये ताफक यह सुतनजश्चत हो सके फक

प्रत्येक चरण में सुरक्षक्षत पररचालन के शलये आवश्यक तापमान तनहदगष्ट सीमा के भीतर रखा जा सके।

11.

ज्वलनशील पिार्ा का ववद्युत हीटर या बनार की लौ पर ररसाव से बचाव – प्रत्येक अवन या

ड्रायर में ऐसी व्यवस्र्ा उपलब्ि करायी जानी चाहहये जजससे ज्वलनशील पदार्ग त्रबजली के हीटर या बनगर

की लौ पर टपकने न पाये।

[PART IV

DELHI GAZETTE : EXTRAORDINARY

95

12.

सावधधक परीक्षण, जांच और र र ाव – प्रत्येक अवन या ड्रायर के सभी हहस्सों का समुधचत

रखरखाव और जांच होनी चाहहये। अनुसूची में उल्लेख के अनुसार ववशभन्न ववतनयमन तर्ा अवन या

ड्रायर का परीक्षण, अशभग्राही या प्रबंिक द्वारा अधिकृत सक्षम व्यजक्त द्वारा उधचत अंतराल पर फकया

जाना चाहहये ताफक इसका सुरक्षक्षत पररचालन सुतनजश्चत हो सके। अधिकृत व्यजक्त अपने अनुभव तर्ा

फकसी ववस्फोट के खतरे को लेकर आवश्यक सतकगता बरतने की जानकारी के आिार पर इस प्रकार के

काम के शलये पूरी तरह सक्षम होगा।

13.

प्रचालक का प्रलशक्षण – फकसी भी व्यजक्त को फकसी अवन या ड्रायर के पररचालन से संबंधित

कोई भी कायग तबतक नहीं हदया जायेगा जबतक वह 18 विग का न हो और इस काम समुधचत रूप से

प्रशशक्षक्षत न हो।

14.

पॉललमराइस्जंग मशीन – (क) फकसी भी वप्रंटेड कपडे को पॉशलमराइजजंग मशीन में डालने से पहले

ड्राइंग कैन या गमग धचमनी या समान रूप से प्रभावी सािन से गुजार कर अच्छी तरह सुखा शलया जाना

चाहहये।

(ख) पॉशलमराइजजंग मशीन का इन्रा- रे हीटर वप्रंट चलाये जाने के दौरान बंद कर हदया जाना चाहहये।

..........

अनुसूची- XVIII

कालसानोजेननक यानी कैंसरकारी रंग और मध्यवती पिार्ों का ननमााण और पररचालन

1.

अनुप्रयोग – यह अनुसूची सभी कार ानों या उनके क्रकसी टहस्से के संिभा में लागू होगी जहां

कालसानोजेननक यानी कैंसरकारी रंग मध्यवती (यहां ववननमााण प्रक्रियाओं के रूप में उल्ले क्रकया जायेगा)

के ननमााण और पररचालन की प्रक्रियाएं होती हैं। पैराग्राफ 25 और 26 केवल ववननमााण, पररलशष्ट बी

(यहां ववननमााण प्रक्रियाएं बी के रूप में उल्ले होगा) में उस्ल्लख त यौधगकों के पररचालन से संबंधधत

है।

भाग-1

2.

पररभाषा – (क) इस अनुसूची के प्रयोजन के शलये एक नाइरो या अशमनो यौधगक का मतलब है

यहां संलग्न पररशशष्ट ए और बी में उजल्लखखत एरोमैहटक हाइड्रोकाबगन का नाइरेटेड या अशमनेटेड

यौधगक।

(ख) “अप्रूव्ड ” का अर्ग है मुख्य तनरीक्षक सह सुवविाप्रदाता से अनुमोहदत।

(ग) “ओशमटेड ” यानी छोड हदया गया

(घ) “एफफशशयेंट एगजॉस्ट ड्रैफ्ट ” यानी सक्षम तनकासी खखंचाव का अर्ग है

96

DELHI GAZETTE : EXTRAORDINARY

PART IV]

गैस, वाष्प, िूल या िुएं को हटाने के शलये यांत्रत्रक सािनों से स्र्ानीय प्रभावी वायु संचरण ताफक जहां काम

चल रहा है वहां की हवा में इन्हें शमलने से रोकना। कोई भी खखंचाव तबतक प्रभावी नहीं माना जा सकता

जबतक वह गैस, वाष्प, िुएँ या िूल को उनके उत्पन्न होने के स्र्ान से हटाने में सफल न रहे, और

(ड.) पररचालन में शमलाना, शमश्रण बनाना, भरना, खाली करना, पीसना, छानना, सुखाना, पैफकंग करना,

बुहारना, संचालन, उपयोग या नाइरो अशमनो यौधगक का रासायतनक प्रसंस्करण।

(च) “एयरलाईन श्वसन ” जरूरी कनेक्शन के सार् हेलमेट या चेहरे का कवर जजसके द्वारा इसका प्रयोग

करने वाला व्यजक्त वविाक्त या अशुद्ि हवा में सामान्य वायु सांस में ले सके या मुख्य तनरीक्षक सह

सुवविाप्रदाता द्वारा शलखखत रूप से अनुमोहदत उपयुक्त उपकरण।

3. चेतावनी घोषणापत्र - इस अनुसूची के सार् संलग्न पररशशष्ट में तनहदगष्ट प्रारूप में और संबंधित प्रफक्रयाओं

में काम कर रहे अधिकांश कशमगयों को समझ आने वाली भािा में छपे चेतावनी घोिणापत्र कारखाने में

उन प्रमुख स्र्ानों पर लगाये जाएँगे जहाँ उन्हें आसानी से पढ़ा जा सके। प्रबंिक द्वारा चेतावनी पट्हटकाओं

में तनहहत साविातनयों के बारे में कशमगयों को समय-समय पर तनदेश देने की व्यवस्र्ा की जाएगी।

4. गभावती मटहलाओं और क्रकशोरों को काम पर लगाने से संबंधधत ननषेध – फकसी भी गभगवती महहला या

फकसी फकशोर को फकसी भी ऐसे कमरे में काम पर नहीं लगाया जायेगा जहां उक्त प्रफक्रयाएं चल रही हों।

5. वायु के ललये स्र्ान – प्रत्येक कमरे में जहां उक्त ववतनमागण प्रफक्रयाएं तनष्पाहदत होती हैं, काम पर लगाये

गये प्रत्येक व्यजक्त के शलये मशीनी संयंत्र और अन्य वस्तुओं से तघरे स्र्ल को छोडकर वायु क्षेत्र का कम

से कम 15 घनमीटर क्षेत्र होना चाहहये। और इस वायु क्षेत्र की संगणना में 4.26 मीटर से उपर की उंचाई

नहीं ली जायेगी।

6. सक्षम ननकासी ड्रैफ्ट – जबतक उक्त प्रफक्रया पूरी तरह बंद नहीं हो जाती, िूल और िुएं पर तनयंत्रण के

शलये इसे सक्षम तनकासी ड्रैफ्ट के उपयोग के त्रबना तनष्पाहदत नहीं फकया जायेगा, जबफक नाइरो अशमनो

यौधगक –

(क)

टैंक, हॉपर, मशीन, या कंटेनर में डाला जाये या काहटगरेजं में भरा जाये, या

(ख)

इसे पीसा, तोडा, शमलाया छाना या शमश्रण बनाया जाये।

7.

फशा और कायाकक्ष – प्रत्येक काया कक्ष की फशा , जहां उक्त प्रक्रियाएं ननष्पाटित की जाती हैं –

(क)

धचकनी और पानी न ररसने देने वाली मजबूत होनी चाहहये, फशग की संरचना में डामर या कोलतार

का उपयोग नहीं होना चाहहये,

(ख)

फशग मजबूत और अच्छी जस्र्तत में होनी चाहहये

(ग)

फशग में समुधचत स्लोप और गटर होना चाहहये ताफक पानी की तनकासी सुगमता से हो सके, और

(घ)

तनयशमत रूप से प्रततहदन इसकी िुलाई होनी चाहहये और बंद चैनल के माध्यम से पानी की

समुधचत तनकासी होनी चाहहये।

[PART IV

DELHI GAZETTE : EXTRAORDINARY

97

8.

काया ननष्पाटित करने के ललये बेंच – बेंच जजसपर नाइरो या अशमनो यौधगक पररचाशलत फकया

जायेगा, उसे

(क)

धचकनी और मजबूत सतह वाला होना चाहहये, बेहतर हो फक बेंच स्टेनलेस स्टील की हो

(ख)

जब बेच पर काम न हो रहा हो उस समय होजपाइप से तनयशमत रूप से इसकी िुलाई होनी

चाहहये या अवशोिक यंत्र से साफ फकया जाना चाहहये

9.

कचरा ननस्तारण – (1) क्लॉर् पेपर या नाइरो अशमनो यौधगक से भींगा अन्य कचरा जमा करने

के शलये गैर अवशोिक सामग्री से बना और मजबूत कवर वाला समुधचत पात्र उपलब्ि कराया जाना

चाहहये। (2) इस कचरा पात्र को फकसी उत्तरदायी व्यजक्त की तनगरानी में जलाकर या अन्य समुधचत ववधि

से नष्ट कर हदया जाना चाहहये।

10.

ाली कंटेनर का ननस्तारण – पररशशष्ट क में शाशमल यौधगको को रखने में इस्तेमाल हुए खाली

कंटेनर को अच्छी तरह साफ फकया जाना चाहहये और हटाने से पहले फकसी तनजष्क्रय करने वाले एजेंट से

समुधचत रूप से उपचाररत फकया जायेगा।

11.

गड्ढों, टंकी इत्याटि को संिमण मुक्त करना –

(क)

जब भी कोई कामगार फकसी ऐसे गड्ढे, टंकी या केट्ल या फकसी अन्य संकुधचत और सीशमत

स्र्ल में उतरता है, जजसमें नाइरो या अशमनो यौधगक की मौजूदगी है तो उसे अच्छी तरह खुद को साफ

स्वच्छ करना चाहहये।

(ख)

सयंत्र का कोई भी हहस्सा जहां नाइरो या अशमनो यौधगक है, तबतक फकसी काम या मरम्मत के

शलये नहीं खोला जाना चाहहये जबतक फक उन यौधगकों को वहां से हटा न शलया जाये और अच्छी तरह

उस स्र्ान को साफ और संक्रमण मुक्त न कर शलया जाये।

(ग)

इस प्रकार के उपचार का पूरा ररकॉडग मुख्य तनरीक्षक सह सुवविाप्रदाता से अनुमोहदत पंजजका

में रखा जाना चाहहये और आवश्यकता पडने परक तनरीक्षण के शलये पंजजका उपलब्ि करायी जानी चाहहये।

12.

हार्ों से संचालन – तनयंत्रत्रत पदार्ों को हार् लगाकर नहीं बजल्क एक हैंडल वालै स्कूप से ही

शमलाने, भरने, खाली करने या पररचाशलत करने की अमुमतत है। इस स्कूप को प्रततहदन अच्छी तरह साफ

फकया जाना चाहहये

13.

सुरक्षात्मक वस्त्र- अधिभोगी को नीचे दी गई ताशलका में तनहदगष्ट अनुसार स्वच्छ और अच्छी

जस्र्तत में सुरक्षात्मक वस्त्र और अन्य उपकरण उपलब्ि कराने होंगे और उनका रखरखाव करना होगा:-

ताभिका

प्रनिया

सुरक्षात्मक कपडे और अन्य उपकरर्

(i) पररनशष्ट-क में उनल्लनखि शटय कंपाउंड्स के कुशल कायय-संचालन के (क) पूरी आस्िीन वाली लंबी पिलून या चौगा और नसर ढकने वाला कपडा।

98

DELHI GAZETTE : EXTRAORDINARY

PART IV]

नलए

कमीज़ या चौगा गियन को पूरी िरह से ढकने वाला होना चानहए;

और

(ख) रबर के िस्िाने, रबर एप्रन, रबर के गम बूट और एयरलाइन रेनस्परेटर

पररनशष्ट-ख में उनल्लनखि शटय कंपाउंड्स के कुशल कायय-संचालन के नलए (क) ऊपर (क) में उनल्लनखि सफेि साफ शटय के अलावा सफेि साफ कपडे।

ऊपर (क) में उनल्लनखि अनुसार नसंगलेट और सुरक्षात्मक उपकरर्

(ख) सफेि लंबी आस्िीन वाला एप्रन

14. जोभखम संबंधी भनिेश - उि प्रनियाओं में अपने प्रिम ननयोजन पर प्रत्येक श्रनमक को उन नवर्ैले रसायनों के गुर्ों और उनसे जुडे खिरों और बरिी जाने वाली

सावधाननयों के बारे में पूरी जानकारी िी जाएगी, नजनसे श्रनमकों का संपकय होने की आशंका रहिी है। श्रनमकों को आपाि नस्िनि से ननपटने के नलए नकए जाने वाले उपायों

के बारे में र्ी ननिेश निए जाएँगे।

15. भचभकत्सा अभधकारी द्वारा भचभकत्सा परीिण-

(1) अनुच्छेि 1 में नननियष्ट प्रनियाओं में ननयोनजि प्रत्येक श्रनमक की उसके प्रिम ननयोजन के 15 निनों के र्ीिर नचनकत्सा अनधकारी द्वारा जाँच की जाएगी। ऐसी जांचों

में डमेटाइनटस के नलए त्वचा परीक्षर् शानमल होगा और नकसी र्ी श्रनमक को कारखाने में अपने प्रिम ननयोजन के 15 निनों के बाि काम करने की अनुमनि िब िक नहीं

िी जाएगी जब िक नक नचनकत्सा अनधकारी द्वारा उसे ऐसे ननयोजन के नलए उपयुि प्रमानर्ि न कर निया जाए।

(2) मैंगनीज प्रनिया में काययरि प्रत्येक कमयचारी की प्रत्येक िीन कैलेंडर माह में कम से कम एक बार नचनकत्सा अनधकारी द्वारा पुनिः जाँच की जाएगी और ऐसी जाँच में,

जहाँ र्ी नचनकत्सा अनधकारी उनचि समझे, उप-अनुच्छेि (1) के सर्ी परीक्षर् शानमल होंगे।

(3) नचनकत्सा अनधकारी, कमयचारी की जाँच के बाि, प्रपत्र-24 में स्वास््य प्रमार्पत्र जारी करेगा। की गई जाँच और पुनिः जाँच का ररकॉडय प्रमार्पत्र में िजय नकया जाएगा

और प्रमार्पत्र कारखाने के अनधर्ोगी की अनर्रक्षा में रखा जाएगा। उप-अनुच्छेि (1) और (2) के अंिगयि की गई प्रत्येक जाँच का ररकॉडय, नजसमें इस परीक्षर् की

प्रकृनि और पररर्ाम शानमल हैं, नचनकत्सा अनधकारी द्वारा प्रपत्र-25 में स्वास््य रनजस्टर में र्ी िजय नकया जाएगा।

(4) स्वास््य प्रमार्पत्र और स्वास््य रनजस्टर ननरीक्षक-सह-सुनवधाप्रिािा द्वारा ननरीक्षर् हेिु आसानी से उपलब्ध रखे जाएँगे।

(5) यनि नकसी र्ी समय नचनकत्सा अनधकारी की यह राय हो नक कोई कमयचारी उि प्रनियाओं में इस आधार पर ननयोजन के नलए अब उपयुि नहीं है नक उसमें बने

रहने से कमयचारी के स्वास््य को नवशेर् खिरा होगा, िो वह उि प्रमार्पत्र और स्वास््य रनजस्टर में अपने ननष्ट्कर्ों का अनर्लेख बनाएगा। इन िस्िावेजों में उसके ननष्ट्कर्ों

की प्रनवनष्ट में वह अवनध र्ी शानमल होनी चानहए नजसके नलए वह समझिा है नक उि व्यनि उि प्रनिया में कायय करने के नलए अयोग्य है। उसे वैकनल्पक स्िान-स्िापन

सुनवधाएँ प्रिान की जाएँगी, जब िक नक नचनकत्सा अनधकारी की राय में वह पूरी िरह से अक्षम न हो जाए। ऐसी नस्िनि में प्रर्ानवि व्यनि का उपयुि पुनवायस नकया

जाएगा।

(6) कोई र्ी व्यनि, जो उप-अनुच्छेि (5) में उनल्लनखि अनुसार कायय करने के नलए अयोग्य पाया गया हो, उसे उि प्रनियाओं में पुनिः ननयोनजि या कायय करने की

अनुमनि नहीं िी जाएगी, जब िक नक नचनकत्सा अनधकारी, आगे की जाँच के बाि, उसे उन प्रनियाओं में ननयोजन के नलए पुनिः योग्य प्रमानर्ि न कर िे।

16. धुिाई और स्नान की सुभिधाएँ –

(1) उि प्रनियाओं में काययरि सर्ी श्रनमकों के उपयोग के नलए ननम्ननलनखि धुलाई और स्नान की सुनवधाएँ स्वच्छ और अच्छी नस्िनि में उपलब्ध कराई जाएँगी और

उनका रखरखाव नकया जाएगा:-

(क) एक ढका हुआ धुलाई स्िल नजसमें पानी की ननरंिर आपूनिय हो और साफ िौनलये, साबुन और नेल ब्रश उपलब्ध हों और प्रत्येक पाँच श्रनमकों के नलए कम से कम

एक स्टैंड पाइप हो;

(ख) खंड (क) के अंिगयि उपलब्ध कराए गए स्टैंड पाइपों का 50 प्रनिशि स्नानघरों में नस्िि होगा जहाँ कारखाने के कायय समय के िौरान और उसके बाि एक घंटे िक

गमय और ठंडा िोनों पानी उपलब्ध रहेगा;

[PART IV

DELHI GAZETTE : EXTRAORDINARY

99

(ग) धुलाई और स्नान की सुनवधाएँ उि प्रनियाओं वाले क्षेत्र के ननकट होंगी;

(घ) प्रत्येक श्रनमक को अलग से साफ िौनलए उपलब्ध कराए जाएँगे; और

(ङ) खंड (क) में उनल्लनखि नलों के अनिररि, प्रत्येक िल पर एक स्टैंड पाइप, नजसमें गमय पानी उपलब्ध हो, उपलब्ध कराया जाएगा।

(2) कारखाने की विी और अन्य काम के कपडे प्रनिनिन धोने की व्यवस्िा की जाएगी।

17. धुिाई और स्नान- (क) उि नवननमायर् प्रनिया में काययरि सर्ी श्रनमक र्ोजन करने या कारखाना छोडने से पहले अपने हाि और चेहरे सावधानीपूवयक धोएँगे।

(ख) स्नान रनजस्टर- उि नवननमायर् प्रनिया में काययरि श्रनमक कारखाना पररसर में स्नान करेंगे और ऐसा करने के प्रमार् के रूप में स्नान रनजस्टर में अपना नाम िजय करेंगे।

18. कायग कि में िोजन, पेय आभि भनभषद्ध - कोई र्ी श्रनमक ऐसे नकसी र्ी कायय कक्ष में र्ोजन, पेय, पान, सुपारी या िंबाकू का सेवन या धूम्रपान नहीं करेगा नजसमें

उि प्रनियाएँ की जािी हैं और कोई र्ी श्रनमक र्ोजन या आराम के अंिराल के िौरान ऐसे नकसी र्ी कमरे में नहीं रहेगा।

19. क्िोकरूम - उि प्रनियाओं में काययरि श्रनमकों के उपयोग के नलए ननम्‍नांनकि सुनवधाओं के साि क्ट्लोकरूम स्वच्छ और अच्छी नस्िनि में उपलब्ध और अनुरनक्षि

होगा:-

(क) एक क्ट्लोकरूम नजसमें िो नडब्बे वाले लॉकर हों - एक सडक पर पहने जाने वाले कपडों के नलए और िूसरा काम के कपडों के नलए, और

(ख) लॉकर रूम और मेस रूम से अलग एक स्िान, जहाँ पैराग्राफ 7 के अंिगयि प्रिान नकए गए सुरक्षात्मक उपकरर्ों का र्ंडारर् नकया जा सके। प्रिान नकया गया आवास

एक नजम्मेिार व्यनि की िेखरेख में होगा और उसे साफ-सुिरा रखा जाएगा।

20. मेस रूम - उि प्रनियाओं में काययरि श्रनमकों के उपयोग के नलए, जो ननयनमि अंिराल के िौरान पररसर में रहिे हैं, एक मेस रूम उपलब्ध और अनुरनक्षि होगा,

नजसमें मेजें और बेंच होंगी और र्ोजन गमय करने के नलए उपयुि साधन उपलब्ध होंगे। मेस रूम एक नजम्मेिार व्यनि के प्रर्ार में होगा और उसे साफ-सुिरा रखा जाएगा।

21. धुिाई के भिए अनुमत समय - प्रत्येक र्ोजन से पहले और निन के अंि में, उि प्रनिया में काययरि प्रत्येक व्यनि को धुलाई के नलए ननयनमि अंिराल के अनिररि

कम से कम 10 नमनट का समय निया जाएगा।

22. सुखाने िािे स्टोि - (क) प्रत्येक सुखाने वाले स्टोव को बाहरी हवा के नलए कुशलिापूवयक हवािार नकया जाएगा नजससे स्टोव से गमय हवा नकसी र्ी कायय कक्ष

में न जाए।

(ख) कोई र्ी व्यनि स्टोव में सामग्री ननकालने के नलए िब िक प्रवेश नहीं करेगा जब िक नक यांनत्रक साधनों द्वारा हवा का मुि प्रवाह प्रवानहि न हो जाए।

23. भचंर्ारी रभहत उपकरण - मशीनों की सफाई या मरम्मि या नकसी र्ी ऐसी प्रनिया को संचानलि करने के उद्देश्य से नचंगारी रनहि उपकरर् उपलब्ध कराए जाएंगे

जहाँ बीटा नेन्िल अमीन के वाष्ट्प उत्पन्न होिे हैं।

24. िातािरण का परीिण - कायय कक्ष के वािावरर् में अमीनों का परीक्षर्, जहाँ नवननमायर् प्रनिया चल रही है, प्रत्येक सप्ताह में एक बार नकया जाएगा और ऐसे

अनुमानों के अनर्लेख ननरीक्षक-सह-सुनवधाप्रिािा द्वारा अपेनक्षि होने पर उपलब्ध कराए जाएँगे।

िार्-II

25. प्रनिया का पृिक्ट्करर्- उि नवननमायर् प्रनिया 'ख' ऐसे कमरों में की जाएगी जो अन्य कमरों से संपकय नहीं करेंगे, नसवाय इसके नक बाहरी वािावरर् के नलए पूरी

िरह से खुले मागय उपलब्‍ध होगा।

100

DELHI GAZETTE : EXTRAORDINARY

PART IV]

26. जोनखम की सीमा- (क) 40 वर्य से कम आयु का कोई र्ी कमयचारी इन ननयमों के लागू होने की निनि के बाि पहली बार उि नवननमायर् प्रनिया 'ख' के नलए

कारखाने में ननयुि नहीं नकया जाएगा।

(ख) निन के अंि से पहले, उि नवननमायर् प्रनिया 'ख' में काययरि प्रत्येक व्यनि को स्नान के नलए कम से कम एक घंटा निया जाएगा, नजसमें अनुच्छेि 22 के िहि

अनुमि समय र्ी शानमल है।

27. छूट - यनि नकसी कारखाने के संबंध में, मुख्य ननरीक्षक-सह-सुनवधािािा संिुष्ट है नक असाधारर् पररनस्िनियों या प्रनियाओं की आवृनत्त में कमी या नकसी अन्य

कारर् से, इस अनुसूची के सर्ी या कोई र्ी प्रावधान कारखाने में श्रनमकों की सुरक्षा के नलए आवश्यक नहीं हैं, िो मुख्य ननरीक्षक-सह-सुनवधाप्रिािा एक नलनखि प्रमार्

पत्र (नजसे वह अपने नववेक से नकसी र्ी समय रद्द कर सकिा है) द्वारा ऐसे कारखाने को ऐसे सर्ी या नकसी र्ी प्रावधान से छूट िे सकिा है, बशिे नक ऐसी शिें, यनि

कोई हों, जो वह उसमें नननियष्ट कर सकिा है।

पररभशष्ट-क

[अनुच्छेि 2, 10, 13 िेखें]

बेंजीन, टोल्यूनन, ज़ाइलीन, नजनका एक या कई बार नाइरेशन हो चुका है (नाइरो, डाइनाइरो और नरनाइरो बेंजीन और इसके समरूप) और क्ट्लोरीनयुि यौनगक, नेफेलाइन,

नजनका एक या कई बार नाइरेशन हो चुका है; एनननलन और इसके समरूप (टोल्यूडीन, ज़ाइनलडीन, क्ट्यूनमनाइड) एनननसडीन, फेनेनटडीन और उनके क्ट्लोरीनयुि नाइरेटेड

और एल्काइल युि यौनगक (डाइनमिाइलएलाइन, टोल्यूइलेंनडयामाइन, टोल्यूडीन फेनीहाइड्राज़ीन, टोल्यूइलहाइड्राज़ीन)

पररभशष्ट-ख

[अनुच्छेि 2 और 13 िेखें]

1.अल्फानान्िलैमाइन

2. बीटानान्िलैमाइन

3. बेंनजडीन और उसके लवर्

4. डायनननसडीन

5. टोलुडीन

6. डाइक्ट्लोरोबेंनजडीन

पररभशष्ट - र्

चेतािनी परट्टका/सूचना

1. नाइरो और अमीनो यौनगक सुगंनधि हाइड्रोकाबयन हैं और खिरनाक हैं। इस कारखाने में आपको इन्हें सावधानी से संर्ालना होगा।

2. आपके स्वास््य की सुरक्षा के नलए प्रिान नकए गए सर्ी सुरक्षात्मक कपडों का उपयोग नकया जाना चानहए।

3. हर समय स्वच्छिा बनाए रखें। र्ोजन से पहले हाि और पैर धोएँ। कारखाने से ननकलने से पहले स्नान करना आवश्यक है, हािों को अच्छी िरह धोने का ध्यान रखें।

4. यनि आपके शरीर पर कोई रसायन नगर जाए, िो उसे िुरंि साबुन और पानी से धो लें। िुरंि कपडे बिल लें। यनि साबुन में साइनोनटक नाइरोमाइन यौनगक हो, िो िुरंि

ननयुि डॉक्ट्टर से संपकय करें।

5. नकसी र्ी नाइरो या अमीनो यौनगक को नंगे हािों से न छुएँ। लंबे हैंडल वाले स्कूप का प्रयोग करें।

6. मािक पेय पिािों से बचें क्ट्योंनक इनसे नवर्ाििा का खिरा हो सकिा है।

7. बीमारी की नस्िनि में, कारखाने के प्रबंधक और ननयुि डॉक्ट्टर से संपकय करें।

8. काययस्िल पर या गंिे हािों से चबाएँ, खाएँ, नपएँ या धूम्रपान न करें। खाने-पीने की चीज़ों को काययस्िल से िूर रखें।

9. यनि आप बीटाना्िायलामाइन या बेंनजडीन या इसके लवर् अल्फाना्िायलामाइन या डायनननसडीन के साि काम करिे हैं:-

(क) याि रखें नक अगर शरीर, मुँह, मुँह और औज़ारों की पूरी िरह से सफाई का ध्यान नहीं रखा गया िो कई वर्ों बाि गंर्ीर प्रर्ाव पडेंगे।

(ख) र्ोजन के समय सर्ी रसायनों को हटाने के नलए चेहरे और हािों को साबुन और पानी से िो बार धोएँ; र्ोजन करिे समय लंबी बाजू का साफ एप्रन पहनें।

(ग) फैक्ट्टरी से ननकलने से पहले साबुन और पानी से िो बार नहाएँ। इसके बाि अपने घर के कपडे पहनें।

[PART IV

DELHI GAZETTE : EXTRAORDINARY

101

अनुसूची – XIX

भििायक भनष्कषगण संयंत्रों में िनस्पभतयों और पशु स्रोतों से तेि और िसा भनकािने की प्रभिया

1. पररर्ार्ाएँ – इस अनुसूची के प्रयोजनों के नलए –

(क) “नवलायक ननष्ट्कर्यर् संयंत्र” से िात्पयय ऐसे संयंत्र से है नजसमें वनस्पनि और पशु स्रोिों से िेल और वसा ननकालने की प्रनिया नवलायकों के उपयोग द्वारा की जािी

है;

(ख) “नवलायक” से िात्पयय वनस्पनि िेलों की पुनप्रायनप्त के नलए पेंटेन, हेक्ट्सेन और हेप्टेन्यूज़ जैसे ज्वलनशील द्रव से है;

(ग) नवद्युि मशीनरी या उपकरर्ों पर लागू "ज्वलनरोधी आवरर्" का अिय है एक ऐसा आवरर् जो आवरर् या अन्य प्रवेश द्वारों के उनचि रूप से सुरनक्षि होने पर,

ज्वलनशील गैस या वाष्ट्प के आंिररक नवस्फोट को झेल सकेगा, जो नबना नकसी क्षनि के और बाहरी ज्वलनशील गैस या वाष्ट्प को आंिररक ज्वलन (या नवस्फोट)

संचाररि नकए नबना, आवरर् के अंिर प्रवेश कर सकिा है या उत्पन्न हो सकिा है;

(घ) इस अनुसूची के प्रयोजन के नलए "सक्षम व्यनि" कम से कम इंस्टीट्यूशन ऑफ इंजीननयसय (इंनडया) का सिस्य या उि संस्िान का एक सहयोगी सिस्य होगा,

नजसके पास मुख्य ननरीक्षक-सह-सुनवधाप्रिािा द्वारा अनुमोनिि नकसी नजम्मेिार पि पर 10 वर्ों का अनुर्व हो:

परन्‍िु, यह उपबंनधि है नक यांनत्रक इंजीननयररंग या रासायननक प्रौद्योनगकी में स्नािक, नजसके पास िेल और वसा का नवशेर् ज्ञान हो और नवलायक ननष्ट्कर्यर् संयंत्र में

न्यूनिम 5 वर्ों का अनुर्व हो, उसे र्ी

सक्षम व्यनि माना जाएगा।

यह र्ी उपबंनधि है नक सरकार नकसी अन्य योग्यिा को र्ी स्वीकार कर सकिी है, यनि उसकी राय में वे पूवोि योग्यिाओं के समिुल्य हों।

2. स्िान और लेआउट - (1) नकसी र्ी नवलायक ननष्ट्कर्यर् संयंत्र का ननमायर् या नवस्िार ननकटिम आवासीय क्षेत्र से 30 मीटर की िूरी के र्ीिर करने की अनुमनि नहीं

िी जाएगी।

(2) नवलायक/ननष्ट्कर्यर् संयंत्र के चारों ओर 1.5 मीटर ऊँची ननरंिर िार की बाड लगाई जाएगी जो संयंत्र से न्यूनिम 15 मीटर की िूरी िक होगी।

(3) नकसी र्ी व्यनि को बाड के आसपास के क्षेत्र में मानचस, खुली लौ या आग ले जाने की अनुमनि नहीं होगी।

(4) बॉयलर हाउस और अन्य र्वन जहाँ खुली लौ प्रनियाएँ की जािी हैं, नवलायक ननष्ट्कर्यर् संयंत्र से कम से कम 30 मीटर की िूरी पर नस्िि होंगे;

(5) यनि नवलायक ननष्ट्कर्यर् संयंत्र से 30 मीटर से कम िूरी पर नस्िि हैं, िो ये संयंत्र से कम से कम 15 मीटर की िूरी पर होंगे, और नवलायक ननष्ट्कर्यर् संयंत्र से कम

से कम 15 मीटर की िूरी पर 1.5 मीटर ऊँची गैर-िहनशील सामग्री की एक सिि अवरोधक िीवार खडी की जाएगी िानक यह कम से कम 30 मीटर िक फैले। वाष्ट्प

संयंत्र से संर्ानवि प्रज्वलन स्रोिों िक अपने नसरों के चारों ओर यात्रा करे।

3. भिद्युत प्रभतष्ठान - (1) सर्ी नवद्युि मोटर और िार और नवलायक ननष्ट्कर्यर् संयंत्र में स्िानपि या रखे गए अन्य नवद्युि उपकरर् ज्वालारोधी ननमायर् के होंगे।

(2) संयंत्र और र्वन के सर्ी धािु र्ागों, नजनमें नवनर्न्न टैंक और कंटेनर शानमल हैं जहाँ नवलायक संग्रनहि हैं या मौजूि हैं और नवद्युि उपकरर्ों के सर्ी र्ाग नजन्हें

सनिय करने की आवश्यकिा नहीं है, उन्हें ठीक से जोडा जाएगा और पृ्वी से जोडा जाएगा िानक ऐसे र्ागों के नवद्युि नवर्व में पृ्वी नवर्व से ऊपर आकनस्मक वृनि

से बचा जा सके।

4. धूम्रपान पर प्रभतबंध - नवलायक ननष्ट्कर्यर् संयंत्र से 15 मीटर की िूरी के र्ीिर धूम्रपान सख्ि वनजयि होगा। इस उद्देश्य के नलए, क्षेत्र में "धूम्रपान ननर्ेध" के संकेि

स्िायी रूप से प्रिनशयि नकए जाने चानहए।

102

DELHI GAZETTE : EXTRAORDINARY

PART IV]

5. र्षगण से सािधाभनयाँ - (1) नवलायक ननष्ट्कर्यर् संयंत्रों में उपयोग नकए जाने वाले सर्ी उपकरर् और उपकरर्, नजनमें सीनढयाँ, जंजीरें और अन्य उठाने वाले

उपकरर् शानमल हैं, गैर-स्पानकिंग प्रकार के होने चानहए।

(2) नकसी र्ी नवलायक ननष्ट्कर्यर् संयंत्र में कोई र्ी मशीनरी या उपकरर् बेल्ट चानलि नहीं होगा, जब िक नक उपयोग की जाने वाली बेल्ट ऐसी न हो जो खिरनाक स्िर

िक स्िैनिक नवद्युि के संचय की अनुमनि न िे।

(3) नकसी र्ी व्यनि को नवलायक ननष्ट्कर्यर् संयंत्र में प्रवेश करने और काम करने की अनुमनि नहीं िी जाएगी यनि वह नायलॉन या ऐसे अन्य रेशे से बने कपडे पहने हो

जो स्िैनिक नवद्युि आवेश उत्पन्न कर सकिे हैं, या ऐसे जूिे पहने हो नजनसे घर्यर् से

नचंगारी ननकलने की संर्ावना हो।

6. अभग्नशमन उपकरण - (1) नवलायक ननष्ट्कर्यर् संयंत्र में ज्वलनशील द्रव की आग से बचाव के नलए उपयुि पयायप्त संख्या में पोटेबल अनग्नशामक यंत्र

उपलब्ध कराए जाएंगे।

(2) सॉल्वेंट एक्ट्सरैक्ट्शन प्लांट और ऐसे प्लांट वाले पूरे र्वन में, गीले पाइप या ओपनहेड डेल्यूज नसस्टम पर पयायप्त र्ंडारर् जल आपूनिय के साि एक स्वचानलि जल

स्प्रे नस्प्रंकलर नसस्टम उपलब्ध कराया जाएगा।

7. भबजिी र्ुि होने पर सािधाभनयां - नबजली गुल होने की नस्िनि में र्ाप को स्वचानलि रूप से बंि करने और कंडेनसर को गुरुत्वाकर्यर् द्वारा पानी पहुँचाने के नलए

आपािकालीन ओवरहेड जल आपूनिय का र्ी प्रावधान नकया जाएगा, जो नबजली गुल होने पर स्वचानलि रूप से चालू हो जाएगा।

8. चुंबकीय भििाजक - िेल केक को एक कन्वेयर द्वारा एक हॉपर के माध्यम से एक्ट्सरैक्ट्टर में डाला जाएगा और आग लगने की नस्िनि में िबाव के िौरान लोहे के

नकसी र्ी टुकडे को हटाने के नलए एक चुंबकीय नवर्ाजक प्रिान नकया जाएगा।

9. िेंभटंर् - (1) सॉल्वैंट्स युि टैंकों को आग लगने की नस्िनि में अत्यनधक आंिररक िबाव को कम करने के नलए आपािकालीन वेंनटंग से सुरनक्षि नकया जाएगा।

(2) सर्ी आपािकालीन राहि वेंट ज़मीन से कम से कम 6 मीटर ऊपर होने चानहए और इस िरह नस्िि होने चानहए नक वाष्ट्प उस इमारि में िोबारा प्रवेश न कर सकें

नजसमें नवलायक ननष्ट्कर्यर् संयंत्र नस्िि है।

10. अपभशष्ट जि - प्रनिया अपनशष्ट जल को एक ्लैश वाष्ट्पक से गुजारा जाएगा िानक नकसी र्ी नवलायक को ननकालने के नलए उसे एक नाबिान में डाला जा सके

जो बाड वाले क्षेत्र के र्ीिर नस्िि होना चानहए, लेनकन बाड से 8 मीटर से ज़्यािा नज़िीक नहीं होना चानहए।

11. िेंभटिेशन - नवलायक ननष्ट्कर्यर् संयंत्र में अच्छी िरह से वेंनटलेशन होना चानहए और यनि संयंत्र नकसी इमारि में नस्िि है, िो इमारि में यांनत्रक वेंनटलेशन की

व्यवस्िा होनी चानहए नजसमें प्रनि घंटे कम से कम छह बार हवा बिलने का प्रावधान हो।

12. हाउसकीभपंर् - (1) नवलायकों को नवलायक ननष्ट्कर्यर् संयंत्र द्वारा कवर नकए गए क्षेत्र में संग्रहीि नहीं नकया जाएगा, नसवाय िोडी मात्रा में, नजसे

अनुमोनिि सुरक्षा नडब्बों में संग्रहीि नकया जाएगा।

(2) नवलायक, पेंट और िेल को पोंछने के नलए इस्िेमाल नकए जाने वाले िैलीय कपडे, अन्य अपनशष्ट और अवशोर्क जैसे अपनशष्ट पिािों को अनुमोनिि कंटेनरों में

जमा नकया जाएगा और निन में कम से कम एक बार पररसर से बाहर ननकाला जाएगा।

(3) नवलायक ननष्ट्कर्यर् संयंत्र के र्ीिर और संयंत्र से 15 मीटर के र्ीिर के स्िान को नकसी र्ी ज्वलनशील पिािय से मुि रखा जाएगा और िेल या नवलायक के नकसी

र्ी ररसाव को िुरंि साफ नकया जाएगा।

13. जाँच और मरम्मत - (1) नवलायक ननष्ट्कर्यर् संयंत्र की हर 12 महीने में एक बार नकसी र्ी कमजोरी या संक्षारर् और टूट-फूट का पिा लगाने के नलए सक्षम

व्यनि द्वारा जाँच की जाएगी। ऐसी जाँच की ररपोटय ननरीक्षक-सह-सुनवधाकिाय को उसकी नटप्पर्ी के साि िी जाएगी नक संयंत्र काम करने के नलए सुरनक्षि नस्िनि में है या

नहीं।

(2) सक्षम व्यनि की प्रत्यक्ष िेखरेख के अलावा मशीनरी या संयंत्र की कोई मरम्मि नहीं की जाएगी।

(3) सफाई या मरम्मि के नलए खोलने से पहले और मरम्मि के बाि नवलायक डालने से पहले संयंत्र को अनिय गैस या र्ाप से शुि करने की सुनवधा प्रिान की जाएगी।

14. संचािन कमी - नवलायक ननष्ट्कर्यर् संयंत्र में संयंत्र और मशीनरी का संचालन ऐसे नवनधवि योग्य और प्रनशनक्षि व्यनियों के अधीन होगा नजन्हें सक्षम व्यनि द्वारा

[PART IV

DELHI GAZETTE : EXTRAORDINARY

103

इस प्रयोजन के नलए उपयुि प्रमानर्ि नकया गया हो और नकसी अन्य व्यनि को संयंत्र और मशीनरी का संचालन करने की अनुमनि नहीं िी जाएगी।

15. र्िगिती मभहिाओं और भकशोरों का रोजर्ार - नवलायक ननष्ट्कर्यर् संयंत्र में नकसी र्ी गर्यविी मनहला या नकशोर को ननयोनजि नहीं नकया जाएगा।

16. िाष्प संसूचन - एक उपयुि प्रकार का ज्वालारोधी और सुवाह्य िहनशील गैस संकेिक प्रिान नकया जाएगा और उसे अच्छी काययशील नस्िनि में रखा जाएगा और

मुख्य ननरीक्षक-सह-सुनवधाकिाय द्वारा अनुमोनिि नवनर्न्न स्िानों पर वािावरर् के ननयनमि नमूने लेने की एक अनुसूची िैयार की जाएगी और इस प्रयोजन के नलए बनाए

गए रनजस्टर में िजय की जाएगी।

17. छूट - यनि नकसी कारखाने के संबंध में, मुख्य ननरीक्षक-सह-सुनवधािािा इस बाि से संिुष्ट है नक असाधारर् पररनस्िनियों या प्रनियाओं की आवृनत्त में कमी या

नकसी अन्य कारर् से, इस अनुसूची के सर्ी या कोई र्ी प्रावधान कारखाने में कामगारों की सुरक्षा के नलए आवश्यक नहीं हैं, िो मुख्य ननरीक्षक-सह-सुनवधािािा एक

नलनखि प्रमार् पत्र द्वारा (नजसे वह अपने नववेकानुसार नकसी र्ी समय रद्द कर सकिा है) ऐसे कारखाने को ऐसे सर्ी या नकसी र्ी प्रावधान से छूट िे सकिा है, बशिे नक

वह इसमें नननियष्ट शिों, यनि कोई हों, के अधीन हो।

..........

अनुसूची – XX

मैंर्नीज और उसके यौभर्कों का भनमागण या कायग-संचािन

1. पररिाषाएँ – इस अनुसूची के प्रयोजनों के भिए –

(क) “मैंगनीज प्रनिया” का अिय है मैंगनीज या नकसी अयस्क या मैंगनीज युि नकसी नमश्रर् का प्रसंस्करर्, ननमायर् या कायय-संचालन;

(ख) “प्रिम ननयोजन” का अिय है नकसी र्ी मैंगनीज प्रनिया में प्रिम ननयोजन और इसमें नकसी र्ी मैंगनीज प्रनिया में पुनिः ननयोजन र्ी शानमल है नजसके बाि लगािार

3 कैलेंडर महीनों की अवनध के नलए रोजगार की समानप्त हो।

(ग) “हेरफेर” का अिय है मैंगनीज, या मैंगनीज युि नमश्रर् का नमश्रर्, सनम्मश्रर्, र्रना, खाली करना, पीसना, छलनी करना, सुखाना, पैक करना, झाडना, या अन्यिा

संर्ालना; और

(घ) "कुशल ननकास वेंनटलेशन" का अिय है स्िानीयकृि वेंनटलेशन जो यांनत्रक साधनों द्वारा धूल या धुएं को हटाने के नलए या उसके स्रोि पर नकया जािा है िानक उसे

नकसी र्ी स्िान के वािावरर् में फैलने से रोका जा सके जहाँ कोई कायय नकया जािा है। कोई र्ी ड्रा्ट कुशल नहीं माना जाएगा जो धूल, धुएं या धुंध को उस नबंिु पर

हटाने में नवफल रहिा है जहाँ यह उत्पन्न होिा है और इसे काययस्िल के वािावरर् में फैलने से रोकने में नवफल रहिा है।

2. अनुप्रयोर् - यह अनुसूची प्रत्येक कारखाने पर लागू होगी नजसमें या नजसके नकसी र्ी र्ाग में कोई मैंगनीज प्रनिया की जािी है।

3. छूट - यनि नकसी कारखाने के संबंध में, मुख्य ननरीक्षक-सह-सुनवधाप्रिािा इस बाि से संिुष्ट है नक नकसी असाधारर् पररनस्िनि, या प्रनिया की अननयनमििा, या

नकसी अन्य कारर् से, इस अनुसूची के सर्ी या नकसी र्ी प्रावधान का अनुप्रयोग ऐसे कारखाने में काययरि व्यनियों की सुरक्षा के नलए आवश्यक नहीं है, िो वह नलनखि

आिेश द्वारा, नजसे वह अपने नववेकानुसार रद्द कर सकिा है, ऐसे कारखाने को सर्ी या

नकसी र्ी प्रावधान से ऐसी शिों पर और ऐसी अवनध के नलए छूट िे सकिा है, जैसा नक वह उि आिेश में नननियष्ट कर सकिा है।

4. प्रभिया का पृर्थक्करण - प्रत्येक मैंगनीज प्रनिया, नजससे मैंगनीज युि धूल, वाष्ट्प या धुंध उत्पन्न हो सकिी है, पूरी िरह से बंि प्रर्ाली में या अन्यिा अन्य

प्रनियाओं से प्रर्ावी रूप से पृिक की जाएगी िानक अन्य संयंत्र और प्रनियाएं और कारखाने के अन्य र्ाग और अन्य प्रनियाओं में काययरि व्यनि इससे प्रर्ानवि न हों।

5. प्रभिया का िेंभटिेशन - ऐसी कोई र्ी प्रनिया नजसमें मैंगनीज युि कोई धूल, वाष्ट्प या धुंध उत्पन्न होिी है, उसे कुशल ननकास संवािन के अंिगयि ही नकया जाएगा,

नजसे उत्पािन नबंिु के यिासंर्व ननकट लागू नकया जाएगा।

6. भचभकत्सा अभधकारी द्वारा भचभकत्सा परीिण - (1) नकसी र्ी मैंगनीज प्रनिया में ननयोनजि प्रत्येक कमयचारी की, उसके प्रिम ननयोजन के 15 निनों के र्ीिर एक

नचनकत्सा अनधकारी द्वारा नचनकत्सा परीक्षर् नकया जाएगा। ऐसी परीक्षाओं में रि और मूत्र में सीरम कैनल्शयम, सीरम फॉस्फेट और मैंगनीज का पिा लगाने के नलए परीक्षर्

104

DELHI GAZETTE : EXTRAORDINARY

PART IV]

शानमल होंगे और साि ही नस्िरिा परीक्षर् और अन्य िंनत्रका-पेशी समन्वय परीक्षर् र्ी शानमल होंगे। नकसी र्ी कमयचारी को कारखाने में उसके प्रिम ननयोजन के 15

निनों के बाि काम करने की अनुमनि नहीं िी जाएगी, जब िक नक उसे नचनकत्सा अनधकारी द्वारा ऐसे ननयोजन के नलए प्रमानर्ि न नकया जाए।

(2) मैंगनीज प्रनिया में काययरि प्रत्येक कमयचारी की प्रत्येक िीन कैलेंडर माह में कम से कम एक बार नचनकत्सा अनधकारी द्वारा पुनिः जाँच की जाएगी और ऐसी जाँच में,

जहाँ र्ी नचनकत्सा अनधकारी उनचि समझे, उप-अनुच्छेि (1) के सर्ी परीक्षर् शानमल होंगे।

(3) नचनकत्सा अनधकारी, कमयचारी की जाँच के बाि, प्रपत्र-24 में स्वास््य प्रमार्पत्र जारी करेगा। की गई जाँच और पुनिः जाँच का ररकॉडय प्रमार्पत्र में िजय नकया जाएगा

और प्रमार्पत्र कारखाने के अनधर्ोगी की अनर्रक्षा में रखा जाएगा।

उप-अनुच्छेि (1) और (2) के अंिगयि की गई प्रत्येक जाँच का ररकॉडय, नजसमें इस परीक्षर् की प्रकृनि और पररर्ाम शानमल हैं, नचनकत्सा अनधकारी द्वारा प्रपत्र-25 में

एक स्वास््य रनजस्टर में र्ी िजय नकया जाएगा।

(4) स्वास््य प्रमार्पत्र और स्वास््य रनजस्टर को ननरीक्षक-सह-सुनवधाकिाय द्वारा ननरीक्षर् के नलए आसानी से उपलब्ध रखा जाएगा।

(5) यनि नकसी र्ी समय नचनकत्सा अनधकारी की यह राय हो नक कोई कमयचारी उि प्रनियाओं में इस आधार पर रोजगार के नलए उपयुि नहीं है नक इसमें बने रहने से

कमयचारी के स्वास््य को नवशेर् खिरा होगा, िो वह अपने ननष्ट्कर्ों को उि प्रमार्पत्र और स्वास््य रनजस्टर में िजय करेगा। इन िस्िावेजों में उसके ननष्ट्कर्ों की प्रनवनष्ट में

वह अवनध र्ी शानमल होनी चानहए नजसके नलए वह समझिा है नक उि व्यनि उि प्रनिया में काम करने के नलए अयोग्य है। उसे वैकनल्पक ननयुनि की सुनवधा प्रिान

की जाएगी, जब िक नक वह नचनकत्सा अनधकारी की राय में पूरी िरह से अक्षम न हो, ऐसी नस्िनि में प्रर्ानवि व्यनि का उपयुि रूप से पुनवायस नकया जाएगा।

(6) कोई र्ी व्यनि जो उप-अनुच्छेि (5) में बिाए अनुसार काम करने के नलए अयोग्य पाया गया है, उसे उि प्रनियाओं में िब िक पुनिः ननयोनजि या काम करने की

अनुमनि नहीं िी जाएगी जब िक नक नचनकत्सा अनधकारी, आगे की जांच के बाि, उसे पुनिः उन प्रनियाओं में रोजगार के नलए उपयुि प्रमानर्ि न कर िे।

7. व्यभक्तर्त सुरिा उपकरण - (1) कारखाने का अनधर्ोगी नकसी र्ी मैंगनीज प्रनिया में काययरि सर्ी व्यनियों के नलए उपयुि ओवरऑल और नसर ढकने वाले

कपडे अच्छी और साफ-सुिरी नस्िनि में उपलब्ध कराएगा और उनका रखरखाव करेगा और ऐसे ओवरऑल और नसर ढकने वाले कपडे मैंगनीज प्रनिया पर काम करिे

समय व्यनियों द्वारा पहने जाने चानहए।

(2) कारखाने का अनधर्ोगी आपािकालीन नस्िनि में धूल, धुएं या धुंध को साँस के माध्यम से अंिर जाने से रोकने के नलए उपयुि श्वसन सुरक्षा उपकरर् उपलब्ध

कराएगा। ऐसे उपकरर्ों के पूरे सेट की पयायप्त संख्या हमेशा काययस्िल के पास रखी जाएगी और उनका उनचि रखरखाव नकया जाएगा और उन्हें हमेशा उपयोग के नलए

आसानी से उपलब्ध नस्िनि में रखा जाएगा।

(3) अनधर्ोगी सर्ी ननयोनजि व्यनियों के उपयोग के नलए र्ंडारर् के नलए उपयुि स्िान उपलब्ध कराएगा और उनका रखरखाव करेगा और व्यनिगि सुरक्षा उपकरर्ों

की सफाई और रखरखाव के नलए पयायप्त व्यवस्िा करेगा।

8. र्िगिती मभहिाओं और भकशोरों से संबंभधत भनषेध - नकसी र्ी गर्यविी मनहला या नकशोर को नकसी र्ी मैंगनीज प्रनिया में ननयोनजि या काम करने की अनुमनि

नहीं िी जाएगी।

9. कायग किों में िोजन, पेय आभि भनभषद्ध - नकसी र्ी कायय कक्ष में, जहाँ मैंगनीज प्रनिया चल रही हो, नकसी र्ी कमयचारी को र्ोजन, पेय, पान, सुपारी या िंबाकू

लाने या खाने की अनुमनि नहीं होगी।

10. िोजन कि - मैंगनीज प्रनिया में ननयोनजि व्यनियों के उपयोग के नलए एक उपयुि र्ोजन कक्ष उपलब्ध कराया जाएगा और उसका रखरखाव नकया जाएगा,

नजसमें पयायप्त मेजें और बेंच और र्ोजन गमय करने के नलए पयायप्त साधन उपलब्ध होंगे। र्ोजन कक्ष एक नजम्मेिार व्यनि के प्रर्ार में होगा और उसे साफ-सुिरा रखा

जाएगा।

11. धुिाई सुभिधाएँ - मैंगनीज प्रनिया पर काययरि व्यनियों के उपयोग के नलए, स्वच्छ और अच्छी नस्िनि में उपलब्ध कराई जाएँगी और उनका रखरखाव नकया

जाएगा –

(क) एक ढकी हुई धुलाई जगह, नजसमें या िो –

(i) एक नचकनी अर्ेद्य सिह वाली नाली हो नजसमें एक अपनशष्ट पाइप लगा हो नबना प्लग के, और इिनी लंबाई की हो नक नकसी र्ी समय काययरि प्रत्येक िस ऐसे

व्यनियों के नलए कम से कम 60 सेंटीमीटर पानी की व्यवस्िा हो, और नाली के ऊपर नलों या जेट से पानी की ननरंिर आपूनिय हो जो 60 सेंटीमीटर से अनधक के अंिराल

पर न हो;

(ii) नकसी र्ी समय काययरि ऐसे प्रत्येक पाँच व्यनियों के नलए कम से कम एक वॉश बेनसन, नजसमें अपनशष्ट पाइप और प्लग लगा हो और नजसमें ननरंिर जल आपूनिय

हो; और

[PART IV

DELHI GAZETTE : EXTRAORDINARY

105

(ख) साबुन या अन्य उपयुि सफाई सामग्री, नेल ब्रश और साफ िौनलये की पयायप्त आपूनिय।

12. क्ट्लॉकरूम - यनि मुख्य ननरीक्षक-सह-सुनवधाकिाय ऐसा चाहे, िो मैंगनीज प्रसंस्करर् में काययरि व्यनियों के उपयोग के नलए एक क्ट्लॉकरूम उपलब्ध कराया जाएगा

और उसका रखरखाव नकया जाएगा, नजसमें कायय समय के िौरान उिारे जाने वाले कपडों को सुखाने के नलए पयायप्त व्यवस्िा होगी।

13. चेतािनी परट्टका और भनिेश - पररनशष्ट में नननियष्ट प्रपत्र में चेिावनी सूचनाएँ और काययरि अनधकांश श्रनमकों की र्ार्ा में मुनद्रि, कारखाने में प्रमुख स्िानों पर

लगाई जाएँगी जहाँ श्रनमक उन्हें आसानी से और सुनवधाजनक रूप से पढ सकें। और अनधर्ोगी द्वारा मैंगनीज प्रसंस्करर् में काययरि सर्ी श्रनमकों को उनके कियव्यों से जुडे

स्वास््य संबंधी खिरों और स्वयं की सुरक्षा के सवोत्तम ननवारक उपायों और नवनधयों के बारे में समय-समय पर ननिेश िेने की व्यवस्िा की जाएगी। सूचनाएँ हमेशा सुपाठ्य

नस्िनि में रखी जाएँगी।

पररभशष्ट

चेतािनी सूचना

(मैंर्नी और मैंर्नी यौभर्क)

1. धूल रनहि और धुंधयुि मैंगनीज़ और उसके यौनगक साँस लेने या ननगलने पर नवर्ाि होिे हैं।

2. काययस्िल के पास र्ोजन या पेय का सेवन न करें।

3. र्ोजन करने से पहले अच्छी िरह नहाएँ।

4. कायय क्षेत्र को साफ रखें।

5. उपलब्ध कराए गए सुरक्षात्मक कपडों और उपकरर्ों का उपयोग करें।

6. जब ऐसी पररनस्िनियों में काम करना आवश्यक हो जहाँ धूल, धुआँ या धुंध साँस के द्वारा अंिर जाने की संर्ावना हो, िो इस उद्देश्य के नलए उपलब्ध कराए गए श्वसन

सुरक्षा उपकरर्ों का उपयोग करें।

7. यनि आपको िेज़ नसरििय, लंबे समय िक नींि न आना या शरीर पर असामान्य संवेिनाएँ महसूस हों, िो अनधर्ोगी को सूनचि करें, जो आपकी जाँच और उपचार की

व्यवस्िा करेगा।

.....................

अनुसूची – XXI

बेंजीन और बेंजीन युक्त पिार्थों का भनमागण, संचािन और उपयोर्

1. अनुप्रयोर् – यह अनुसूची बेंजीन से होने वाले नवर्ाििा के खिरों से सुरक्षा प्रिान करने के नलए बनाई गई है और उन कारखानों या उनके र्ागों पर लागू होगी नजनमें

बेंजीन या बेंजीन युि पिािों का ननमायर्, संचालन या उपयोग नकया जािा है।

2. पररिाषाएँ – इस अनुसूची के प्रयोजन के भिए –

(क) “बेंजीन युि पिािय” से िात्पयय ऐसे पिािों से है नजनमें बेंजीन की मात्रा आयिन के अनुसार 1 प्रनिशि से अनधक है;

(ख) “प्रनिस्िापन” से िात्पयय ऐसे रसायन से है जो बेंजीन से हाननरनहि या कम हाननकारक है और बेंजीन के स्िान पर उपयोग नकया जा सकिा है;

(ग) “संलग्न प्रर्ाली” से िात्पयय ऐसी प्रर्ाली से है जो बेंजीन के वाष्ट्प को श्रनमकों के वािावरर् में नहीं जाने िेगी; और

(घ) "कुशल एग्‍जॉस्‍ट ड्रै्ट" का अिय है स्िानीयकृि वेंनटलेशन जो यांनत्रक साधनों द्वारा गैसों, वाष्ट्पों, धूल या धुएं को हटाने के नलए नकया जािा है िानक उन्हें नकसी र्ी

कायय कक्ष की हवा में फैलने से रोका जा सके। कोई र्ी ड्रै्ट कुशल नहीं माना जाएगा यनि वह उस नबंिु पर उत्पन्न धुएं को हटाने में नवफल रहिा है जहाँ से ऐसी गैसें,

वाष्ट्प, धुएं या धूल उत्पन्न होिी हैं।

3. भनषेध और प्रभतस्र्थापन –

(1) बेंजीन और बेंजीन युि पिािों का उपयोग नवलायक या िनुकारक के रूप में िब िक नहीं नकया जाएगा जब िक नक नजस प्रनिया में इसका उपयोग नकया जािा है

वह एक संलग्न प्रर्ाली में न की जाए या जब िक नक प्रनिया को ऐसे िरीके से न नकया जाए नजसे उिना ही सुरनक्षि माना जािा है नजिना नक एक संलग्न िरीके से नकया

106

DELHI GAZETTE : EXTRAORDINARY

PART IV]

जािा। बेंजीन और बेंजीन युि पिािों का उपयोग ननम्ननलनखि प्रनियाओं में नननर्ि है:-

(क) वाननयश, पेंट और निनर का ननमायर्; और

(ख) सफाई और डीग्रीनजंग कायय।

(2) जहाँ उपयुि नवकल्प उपलब्ध हों, वहाँ बेंजीन या बेंजीन युि पिािों के स्िान पर उनका उपयोग नकया जाएगा। हालाँनक, यह प्रावधान

पररनशष्ट क में नननियष्ट प्रनियाओं पर लागू नहीं होगा।

(3) मुख्य ननरीक्षक-सह-सुनवधाकिाय, सरकार द्वारा पुनष्ट के अधीन,

उप-अनुच्छेि 2(क) में ननधायररि प्रनिशि से और इस अनुच्छेि के उप-अनुच्छेि

(2) के प्रावधानों से अस्िायी रूप से कुछ शिों के अधीन और संबंनधि ननयोिाओं और

कमयचाररयों के परामशय के बाि ननधायररि समय सीमा के र्ीिर छूट की अनुमनि िे सकिा है।

4. स्र्थापना के भिरुद्ध सुरिा –

(1) बेंजीन या बेंजीन युि पिािों के उपयोग से संबंनधि प्रनियाएँ, जहाँ िक संर्व हो, एक बंि

प्रर्ाली में की जाएँगी।

(2) ििानप, जहाँ प्रनिया को एक बंि प्रर्ाली में करना व्यावहाररक न हो, वहाँ नजस कायय कक्ष में बेंजीन या बेंजीन युि पिािों का उपयोग नकया जािा है, उसे बेंजीन

वाष्ट्पों को हटाने के नलए एक कुशल ननकास ड्रा्ट या अन्य साधन से सुसनज्जि नकया जाएगा िानक उन्हें कायय कक्ष की हवा में फैलने से रोका जा सके िानक हवा में

बेंजीन की सांद्रिा 10 र्ाग प्रनि नमनलयन आयिन या 30 नमलीग्राम प्रनि घन मीटर से अनधक न हो।

(3) हवा में बेंजीन वाष्ट्पों की सांद्रिा मापने के नलए वायु नवश्लेर्र् हर 8 घंटे में या ऐसे अंिरालों पर नकया जाएगा जैसा नक मुख्य ननरीक्षक-सह-सुनवधाकिाय द्वारा ननिेनशि

नकया जा सकिा है, उन स्िानों पर जहाँ बेंजीन के उपयोग से संबंनधि प्रनिया की जािी है और ऐसे नवश्लेर्र् का पररर्ाम इस उद्देश्य के नलए नवशेर् रूप से बनाए गए

रनजस्टर में िजय नकया जाएगा। यनि वायु नवश्लेर्र् द्वारा मापी गई वायु में बेंजीन वाष्ट्प की सांद्रिा, आयिन के अनुसार 10 र्ाग प्रनि नमनलयन या 30 नमलीग्राम प्रनि घन

मीटर से अनधक हो, िो अनधर्ोगी को िुरंि मुख्य ननरीक्षक-सह-सुनवधाकिाय को सांद्रिा की सूचना िेनी होगी और इस वृनि के कारर् बिाने होंगे।

(4) नजन श्रनमकों के नवशेर् कारर्ों से कायय कक्ष की वायु में बेंजीन की सांद्रिा उप-अनुच्छेि (2) में नननियष्ट अनधकिम से अनधक होने की संर्ावना है, उन्हें उपयुि

श्वासयंत्र या फेस मास्क प्रिान नकए जाएंगे। ऐसे संपकय की अवनध यिासंर्व सीनमि रखी जाएगी।

5. त्िचा के संपकग से बचाि के उपाय –

(1) नजन श्रनमकों के िरल बेंजीन या बेंजीन युि िरल पिािों के संपकय में आने की संर्ावना है, उन्हें उपयुि िस्िाने, एप्रन, जूिे और जहाँ आवश्यक हो, वाष्ट्परोधी

रासायननक चश्मे प्रिान नकए जाएँगे, जो बेंजीन या उसके वाष्ट्प से अप्रर्ानवि सामग्री से बने हों।

(2) उप-अनुच्छेि (1) में उनल्लनखि सुरक्षात्मक वस्त्र अच्छी नस्िनि में रखे जाएँगे और ननयनमि रूप से ननरीक्षर् नकए जाएँगे।

6. र्िगिती मभहिाओं और भकशोरों के रोजर्ार से संबंभधत भनषेध - नकसी र्ी गर्यविी मनहला या नकशोर को ऐसे नकसी र्ी काययस्िल में ननयोनजि या काम करने

की अनुमनि नहीं िी जाएगी जहाँ बेंजीन या बेंजीन युि पिािों का संपकय हो।

7. िेबभिंर् - बेंजीन या बेंजीन युि पिािों वाले प्रत्येक कंटेनर पर "बेंजीन" शब्ि और स्वीकृि खिरे के प्रिीक स्पष्ट रूप से निखाई िेंगे और उस पर बेंजीन की मात्रा,

नवर्ाििा और रसायन की अचूकिा के बारे में चेिावनी र्ी प्रिनशयि होगी।

8. बेंजीन का अनुभचत उपयोर् – (1) श्रनमकों द्वारा अपने हाि या अपने काम के कपडे साफ करने के नलए बेंजीन युि पिािों का उपयोग नननर्ि होगा।

(2) श्रनमकों को ऐसे िुरुपयोग से उत्पन्न होने वाले संर्ानवि खिरों के बारे में ननिेश निए जाएँगे।

9. कायग किों में िोजन आभि का सेिन भनषेध - नकसी र्ी कमयचारी को ऐसे कायय कक्ष में र्ोजन या पेय पिािय संग्रहीि करने या सेवन करने की अनुमनि नहीं होगी

नजसमें बेंजीन या बेंजीन युि पिािों का ननमायर्, संचालन या उपयोग नकया जािा है। ऐसे कायय कक्षों में धूम्रपान और िंबाकू या पान चबाना प्रनिबंनधि होगा।

10. जोभखमों के संबंध में भनिेश - प्रत्येक कमयचारी को अपने पहले रोजगार पर बेंजीन या बेंजीन युि पिािों के गुर्ों और उनसे जुडे खिरों के बारे में पूरी जानकारी

िी जाएगी। कमयचाररयों को आपाि नस्िनि में ननपटने के नलए नकए जाने वाले उपायों के बारे में र्ी ननिेश निए जाएंगे।

11. चेतािनी सूचनाएँ - पररनशष्ट में नननियष्ट प्रारूप में और अनधकांश कमयचाररयों द्वारा आसानी से पढी और समझी जाने वाली र्ार्ा में मुनद्रि चेिावनी सूचनाएँ उन कायय

कक्षों में प्रमुख स्िानों पर प्रिनशयि की जाएंगी जहाँ बेंजीन या बेंजीन युि पिािों का ननमायर्, संचालन या उपयोग नकया जािा है।

[PART IV

DELHI GAZETTE : EXTRAORDINARY

107

12. धुिाई सुभिधाएँ, क्िोकरूम और मेस रूम - नजन कारखानों में बेंजीन या बेंजीन युि पिािों का ननमायर्,प्रबंधन या उपयोग नकया जािा है, वहाँ अनधर्ोगी को

ननम्ननलनखि चीज़ें साफ-सुिरी और अच्छी नस्िनि में रखनी होंगी -

(क) ढकी हुई धुलाई सुनवधाएँ, प्रत्येक 10 व्यनियों के नलए कम से कम एक नल के मानक के अनुसार,

नजसमें साबुन सनहि पानी की ननरंिर आपूनिय हो, और ननरीक्षक-सह-सुनवधाकिाय द्वारा आिेश निए जाने पर प्रत्येक कमयचारी को व्यनिगि रूप से एक साफ िौनलया प्रिान

नकया जाए;

(ख) प्रत्येक कमयचारी के नलए लॉकर युि क्ट्लोकरूम, नजसमें िो नडब्बे हों- एक सडक पर पहने जाने वाले कपडों के नलए और िूसरा काम के कपडों के नलए; और

(ग) र्ोजन गमय करने के साधनों के साि मेजों और बेंचों से सुसनज्जि एक र्ोजनालय कक्ष, बशिे नक जहाँ कमयचाररयों के र्ोजन करने के नलए कैंटीन या अन्य उनचि

व्यवस्िा हो, वहाँ र्ोजनालय कक्ष की आवश्यकिाओं को समाप्त कर निया जाएगा।

13. भचभकत्सा अभधकारी द्वारा भचभकत्सा परीिण -(1) अनुच्छेि 1 में नननियष्ट प्रनियाओं में ननयोनजि प्रत्येक कमयचारी की उसके प्रिम ननयोजन के 15 निनों के

र्ीिर एक नचनकत्सा अनधकारी द्वारा जाँच की जाएगी। ऐसी जाँचों में चमयरोग के नलए त्वचा परीक्षर् शानमल होगा और

नकसी र्ी कमयचारी को कारखाने में उसके प्रिम ननयोजन के 15 निनों के बाि काम करने की अनुमनि नहीं िी जाएगी, जब िक नक उसे नचनकत्सा अनधकारी द्वारा ऐसे

ननयोजन के नलए उपयुि प्रमानर्ि न कर निया जाए।

(2) मैंगनीज प्रनिया में काययरि प्रत्येक कमयचारी की प्रत्येक 12 माह में कम से कम एक बार नचनकत्सा अनधकारी द्वारा पुनिः जाँच की जाएगी और ऐसीच में, जहाँ र्ी

नचनकत्सा अनधकारी उनचि समझे, उप-अनुच्छेि (1) के सर्ी परीक्षर् शानमल होंगे।

(3) नचनकत्सा अनधकारी, कमयचारी की जाँच के बाि, प्रपत्र-24 में स्वास््य प्रमार्पत्र जारी करेगा। की गई जाँच और पुनिः जाँच का ररकॉडय प्रमार्पत्र में िजय नकया जाएगा

और प्रपत्र कारखाने के अनधर्ोगी की अनर्रक्षा में रखा जाएगा।

उप-अनुच्छेि (1) और (2) के अंिगयि की गई प्रत्येक जाँच का ररकॉडय, नजसमें इस परीक्षर् की प्रकृनि और पररर्ाम शानमल हैं, नचनकत्सा अनधकारी द्वारा प्रपत्र-25 में

एक स्वास््य रनजस्टर में र्ी िजय नकया जाएगा।

(4) स्वास््य प्रमार्पत्र और स्वास््य रनजस्टर को ननरीक्षक-सह-सुनवधाकिाय द्वारा ननरीक्षर् के नलए ित्परिापूवयक उपलब्ध रखा जाएगा।

(5) यनि नकसी र्ी समय नचनकत्सा अनधकारी की यह राय हो नक कोई कमयचारी उि प्रनियाओं में इस आधार पर रोजगार के नलए उपयुि नहीं है नक इसमें बने रहने से

कमयचारी के स्वास््य को नवशेर् खिरा होगा, िो वह अपने ननष्ट्कर्ों को उि प्रमार्पत्र और स्वास््य रनजस्टर में िजय करेगा। इन िस्िावेजों में उसके ननष्ट्कर्ों की प्रनवनष्ट में

वह अवनध र्ी शानमल होनी चानहए नजसके नलए वह समझिा है नक उि व्यनि उि प्रनिया में काम करने के नलए अयोग्य है। उसे वैकनल्पक ननयुनि की सुनवधा प्रिान

की जाएगी, जब िक नक वह नचनकत्सा अनधकारी की राय में पूरी िरह से अक्षम न हो जाए, ऐसी नस्िनि में प्रर्ानवि व्यनि का उपयुि रूप से पुनवायस नकया जाएगा।

(6) कोई र्ी व्यनि जो उप-अनुच्छेि (5) में बिाए अनुसार काम करने के नलए अयोग्य पाया गया है, उसे उि प्रनियाओं में िब िक पुनिः ननयोनजि या काम करने की

अनुमनि नहीं िी जाएगी जब िक नक नचनकत्सा अनधकारी, आगे की जाँच के बाि, उसे पुनिः उन प्रनियाओं में रोजगार के नलए उपयुि प्रमानर्ि न कर िे।

पररभशष्ट-क

[खंड 3(ख) िेखें]

1 बेंजीन का उत्पािन

2 वह प्रनिया जहाँ बेंजीन का उपयोग रासायननक संश्लेर्र् के नलए नकया जािा है

3 मोटर नस्पररट (ईंधन के रूप में प्रयुि)

पररभशष्ट-ख

[खंड 11 िेखें]

चेतािनी सूचना

(बेंजीन और बेंजीन युक्त पिार्थग)

1. खतरे

(क) बेंजीन और बेंजीन युि पिािय हाननकारक हैं।+

108

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(ख) बेंजीन वाष्ट्पों को लंबे समय िक या बार-बार साँस लेने से िीव्र या िीघयकानलक नवर्ाििा हो सकिी है।

(ग) बेंजीन त्वचा के माध्यम से र्ी अवशोनर्ि हो सकिा है नजससे त्वचा या अन्य रोग हो सकिे हैं।

2. भनिारक उपाय

(क) बेंजीन वाष्ट्पों को साँस लेने से बचें।

(ख) त्वचा के साि बेंजीन के लंबे समय िक या बार-बार संपकय से बचें।

(ग) बेंजीन से र्ीगे या गीले कपडों को िुरंि हटा िें।

(घ) यनि आप कर्ी र्ी बेंजीन वाष्ट्प की उच्च सांद्रिा के संपकय में आिे हैं और चक्ट्कर आना, साँस लेने में कनठनाई, अत्यनधक उत्तेजना और बेहोशी जैसे लक्षर् प्रिनशयि

करिे हैं, िो िुरंि अपने कारखाने के प्रबंधक को सूनचि करें।

(ङ) बेंजीन के सर्ी कंटेनरों को बंि रखें।

(च) बेंजीन और बेंजीन युि पिािों को सावधानीपूवयक संर्ालें, उपयोग करें और संसानधि करें िानक वे फशय पर न नगरें।

(छ) अच्छी हाउसकीनपंग बनाए रखें।

3. सुरिात्मक उपकरण

(क) उन स्िानों पर श्वसन सुरक्षा उपकरर् का प्रयोग करें जहाँ बेंजीन वाष्ट्प उच्च सांद्रिा में मौजूि हों।

(ख) आपाि नस्िनि में, स्व-उत्पािक ऑक्ट्सीजन मास्क या ऑक्ट्सीजन या वायु नसलेंडर मास्क का प्रयोग करें।

(ग) अपनी त्वचा और शरीर के अंगों के साि बेंजीन के संपकय से बचने के नलए िस्िाने, एप्रन, चश्मा और गम बूट पहनें।

4. तीव्र बेंजीन भिषाक्तता की भस्र्थभत में प्रार्थभमक उपचार के उपाय

(क) यनि कपडे बेंजीन से गीले हों िो िुरंि उन्हें उिार िें।

(ख) यनि िरल बेंजीन आँखों में चला जाए, िो कम से कम 15 नमनट िक साफ बहिे पानी से अच्छी िरह धोएँ और िुरंि नचनकत्सा सहायिा लें।

(ग) बेंजीन वाष्ट्प के असामान्य संपकय में आने की नस्िनि में, िुरंि नकसी नचनकत्सक को बुलाएँ। उसके आने िक, ननम्ननलनखि कायय करें:-

(i) यनि संपकय में आया व्यनि होश में है –

(क) उसे खुली हवा में ले जाएँ।

(ख) नबना िनकये के नलटाएँ और उसे शांि और गमय रखें।

(ii) यनि संिनमि व्यनि बेहोश है –

(क) उसे नसर नीचे करके बाईं ओर नलटाएँ।

(ख) उसके मुँह में मौजूि नकली िाँि, च्युइंग गम, िंबाकू या अन्य बाहरी वस्िुएँ हटा िें।

(ग) यनि साँस लेने में कनठनाई हो रही हो िो उसे कृनत्रम श्वसन प्रिान करें।

(घ) उिली साँस लेने या सायनोनसस (त्वचा, होंठ, कान, उंगनलयों के नाखूनों का नीला पडना) की नस्िनि में, उसे मेनडकल ऑक्ट्सीजन या ऑक्ट्सीजन काबयन डाइऑक्ट्साइड

नमश्रर् निया जाना चानहए। यनि आवश्यक हो, िो उसे कृनत्रम श्वसन निया जाना चानहए। ऑक्ट्सीजन केवल प्रनशनक्षि व्यनि द्वारा ही िी जानी चानहए।

अनुसूची – XXII

काबयन डाइसल्फाइड संयंत्रों में नवननमायर् प्रनिया या संचालन

1. अनुप्रयोर् – यह अनुसूची उन सर्ी नवद्युि र्रट्टयों पर लागू होगी नजनमें काबयन डाइसल्फाइड उत्पन्न होिा है और उन सर्ी अन्य संयंत्रों पर र्ी जहाँ काबयन डाइसल्फाइड

उत्पािन के बाि संघननि, पररष्ट्कृि और संग्रहीि नकया जािा है। यह अनुसूची संनहिा और उसके अंिगयि बनाए गए ननयमों के नकसी र्ी प्रावधान के अनिररि है, न नक

उसका उल्लंघन।

2. भनमागण, स्र्थापना और संचािन-

(1) नजन र्वनों में नवद्युि र्रट्टयाँ स्िानपि की जािी हैं और काबयन डाइसल्फाइड उत्पािन के बाि संघननि और पररष्ट्कृि नकया जािा है, उन्हें कारखाने के अन्य र्ागों से

[PART IV

DELHI GAZETTE : EXTRAORDINARY

109

अलग रखा जाएगा और इष्टिम वेंनटलेशन सुनननिि करने के नलए खुले प्रकार के होंगे और संयंत्र का लेआउट ऐसा होगा नक नकसी र्ी समय केवल न्यूनिम संख्या में

श्रनमक ही आग या नवस्फोट के जोनखम के संपकय में आएँ।

(2) प्रत्येक नवद्युि र्ट्टी और प्रत्येक संयंत्र नजसमें काबयन डाइसल्फाइड को संघननि, पररष्ट्कृि और संग्रनहि नकया जािा है, उसकी सर्ी नफनटंग और संलग्नक अच्छी

संरचना, ठोस सामग्री और पयायप्त मज़बूिी से बने होंगे िानक र्ट्टी या संयंत्र पर पडने वाले आंिररक िबाव को सहन नकया जा सके और इस प्रकार नडज़ाइन नकया जाएगा

नक काबयन डाइसल्फाइड द्रव और गैस अपने सामान्य संचालन के िौरान बंि प्रर्ाली में रहें।

(3) नवद्युि र्ट्टी के आधारों को कंिीट में या अन्य प्रर्ावी िरीकों से लगर्ग 60 सेंटीमीटर िक मज़बूिी से ग्राउट नकया जाएगा।

(4) प्रत्येक नवद्युि र्ट्टी को ननमायिाओं के ननिेशों के अनुसार स्िानपि और संचानलि नकया जाएगा और ये ननिेश ननमायर् और संचालन के प्रर्ारी कनमयों को स्पष्ट रूप

से निए जाएँगे।

(5) सही र्ट्टी िापमान, सल्फर की मात्रा, स्वीकायय धारा या नबजली की खपि और चारकोल के स्िर की समय-समय पर जाँच के ननिेशों का कडाई से पालन नकया

जाएगा।

3. इिेक्रोड -

(1) जहाँ नवद्युि र्ट्टी में स्टील से बने ऊपरी ररंग इलेक्ट्रोड का उपयोग नकया जािा है, वे सीमलेस ट्यूब संरचना के होंगे और इलेक्ट्रोड में नननमयि साइफन या धनात्मक

िाब वाले जल पंप के माध्यम से शीिलन जल प्रर्ाली से जुडने की व्यवस्िा होगी।

(2) उप-अनुच्छेि (1) 165 में उनल्लनखि शीिलन जल की व्यवस्िा एक स्वचानलि अलामय प्रर्ाली से जुडी होगी जो इलेक्ट्रोड में शीिलन जल के रुकावट की नस्िनि

में सनिय हो जाएगी और ननयंत्रर् कक्ष में दृश्य और श्रव्य अलामय संकेि िेगी और साि ही र्ट्टी के संचालन के नलए नबजली की आपूनिय बंि कर िेगी और आगे पानी की

आपूनिय रोक िेगी। अलामय प्रर्ाली और एक्ट्चुएनटंग नडवाइस की प्रनिनिन जाँच की जाएगी।

4. चारकोि स्तर सूचक और िाइब्रेटर - प्रत्येक नवद्युि र्ट्टी पर र्ट्टी में चारकोल के सही स्िर को इंनगि करने और चारकोल को कंपन करने के नलए साधन उपलब्ध

कराए जाएंगे। चारकोल के सही आवेश और स्िर को बनाए रखने के नलए आवश्यकिानुसार इस साधन का अक्ट्सर उपयोग नकया जाएगा।

5. चारकोि भििाजक - नवद्युि र्ट्टी और सल्फर नवर्ाजक के बीच ऑफ-टेक पाइप पर एक चिवाि प्रकार का चारकोल नवर्ाजक लगाया जाएगा िानक कंडेनसर

और पाइनपंग में चारकोल के टुकडों का प्रवेश रोका जा सके।

6. रप्चर भडस्क और सुरिा सीि –

(1) प्रत्येक र्ट्टी पर पयायप्त आकार की कम से कम िो रप्चर नडस्क लगाई जाएंगी जो अनधकिम पररचालन िबाव के िोगुने िबाव पर फटेंगी और या िो सीधे र्ट्टी के

ऊपर लगाई जाएंगी या प्रत्येक को र्ट्टी के यिासंर्व करीब एक स्विंत्र पाइप के माध्यम से लगाया जाएगा।

(2) चारकोल नवर्ाजक और सल्फर नवर्ाजक के बीच एक नबंिु से एक सुरक्षा जल सील लगाई जाएगी और उसे टैप नकया जाएगा।

7. पाइरोमीटर और मैनोमीटर –

(1) प्रत्येक नवद्युि र्ट्टी में पयायप्त संख्या में पाइरोमीटर लगाए जाएंगे िानक र्ट्टी के नवनर्न्न नबंिुओं पर िापमान का यिासंर्व सही संकेि निया जा सके। िापमान मापने

के नलए डायल ननयंत्रर् कक्ष में नस्िि होंगे।

(2) िबाव िशायने के नलए मैनोमीटर या कोई अन्य उपयुि उपकरर् उपलब्ध कराए जाएँगे -

(क) सल्फर नवर्ाजक के पहले और बाि में ऑफ-टेक पाइप में; और

(ख) प्रािनमक और नद्विीयक संघननत्रों में।

8. चेक िाल्ि - काबयन डाइसल्फाइड ले जाने वाली सर्ी पाइनपंग में उपयुि स्िानों पर चेक वाल्व लगाए जाएँगे िानक गैस को नकसी र्ी नवद्युि र्ट्टी के बंि होने की

नस्िनि में वापस उसमें प्रवानहि होने से रोका जा सके।

9. भिद्युत िरट्टयों का भनरीिण और रखरखाि –

(1) प्रत्येक नवद्युि र्ट्टी का आंिररक ननरीक्षर् एक सक्षम व्यनि द्वारा नकया जाएगा।

(क) स्िापना के बाि सेवा में लगाए जाने से पहले;

(ख) पुनननयमायर् या मरम्मि के बाि सेवा में लगाए जाने से पहले; और

(ग) समय-समय पर हर बार जब र्ट्टी को सफाई या हटाने या इलेक्ट्रोड बिलने के नलए खोला जािा है।

110

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(2) जब नकसी नवद्युि र्ट्टी को सफाई या हटाने के नलए बंि नकया जािा है -

(क) ईंट की परि की ननरंिरिा की जाँच की जाएगी और नकसी र्ी िोर्पूर्य र्ाग को हटा निया जाएगा;

(ख) (क) में उनल्लनखि परि के नकसी र्ी र्ाग को हटाने के बाि,

शेल की नस्िनि का बारीकी से ननरीक्षर् नकया जाएगा; और

(ग) यनि र्ट्टी की सुरक्षा को खिरा होने पर कोई र्ी प्लेट जंग लगी पाई जािी है, िो उसे बिल निया जाएगा।

10. अभििेखों का रखरखाि - ननम्ननलनखि प्रनि घंटा अनर्लेख एक लॉगबुक में रखे जाएंगे।

(क) उप-अनुच्छेि 7(2) में नननियष्ट नबंिुओं पर मैनोमीटर रीनडंग;

(ख) पाइरोमीटर और सल्फर नवर्ाजक ििा प्रािनमक एवं नद्विीयक संघननत्रों के पास नस्िि अन्य सर्ी महत्वपूर्य नबंिुओं द्वारा िशाया गया गैस का िापमान;

(ग) इलेक्ट्रोडों में साइफन के माध्यम से जल का िापमान और जल का प्रवाह;

और

(घ) प्रािनमक एवं नद्विीयक वोल्टेज, धारा और खपि की गई ऊजाय।

11. भिद्युत उपकरण, तार और भफभटंर् - सर्ी र्वन नजनमें काबयन डाइसल्फाइड का शोधन या र्ंडारर् नकया जािा है, उनमें नवद्युि उपकरर्, िार और नफनटंग उपलब्ध

कराई जाएँगी जो आग और नवस्फोट से पयायप्त सुरक्षा प्रिान करें।

12. धूम्रपान से संबंभधत भनषेध - कोई र्ी व्यनि उन र्वनों में धूम्रपान नहीं करेगा या मानचस, आग या खुली रोशनी या नचंगारी उत्पन्न करने के अन्य साधन नहीं ले

जाएगा नजनमें काबयन डाइसल्फाइड का शोधन या र्ंडारर् नकया जािा है, और संयंत्र में अनधकांश श्रनमकों द्वारा समझी जाने वाली र्ार्ा में एक सूचना लगाई जाएगी

नजसमें धूम्रपान और मानचस, आग या खुली रोशनी या नचंगारी उत्पन्न करने के अन्य साधन ऐसे कमरों में ले जाने पर प्रनिबंध लगाया जाएगा।

13. बचने के साधन - आपाि नस्िनि में लोगों को यिाशीघ्र सुरनक्षि स्िान पर पहुँचाने के नलए पयायप्त बचने के साधन उपलब्ध कराए जाएँगे और उनका रखरखाव र्ी

नकया जाएगा। र्रट्टयों वाले प्रत्येक र्वन में नवपरीि छोर पर उनचि अंिराल पर पयायप्त चौडाई की कम से कम िो स्विंत्र सीनढयाँ उपलब्ध कराई जाएँगी। इन्हें हमेशा सर्ी

अवरोधों से िूर रखा जाएगा और इस प्रकार नडज़ाइन नकया जाएगा नक आसानी से पहुँचा जा सके।

14. आर् िर्ने की भस्र्थभत में चेतािनी - आग या नवस्फोट की नस्िनि में चेिावनी िेने के नलए पयायप्त व्यवस्िा होगी जो नवद्युि से संचानलि होगी

और नकसी यांनत्रक साधन से नबजली गुल होने की नस्िनि में र्ी।

15. अभग्नशमन उपकरण –

(1) संग्रहीि सामग्री की मात्रा और प्रकृनि के आधार पर, जोनखमों से ननपटने के नलए पयायप्त संख्या में उपयुि अनग्नशामक यंत्र या अन्य अनग्नशमन उपकरर् ननरंिर िैयार

रखे जाएँगे।

(2) अनग्नशामक यंत्रों या अन्य उपकरर्ों का उपयोग कैसे नकया जाना चानहए, इस बारे में स्पष्ट ननिेश प्रत्येक अनग्नशामक यंत्र या अन्य उपकरर् पर नचपकाए जाएँगे और

कनमयों को उनके उपयोग में प्रनशनक्षि नकया जाएगा।

16. र्थोक सल्फर –

(1) िोक सल्फर के र्ंडारर् के नलए खुले या अधय-संलग्न स्िान, आस-पास के इंजनों आनि से ननकलने वाली नचंगाररयों से उत्पन्न होने वाले खिरों को ध्यान में रखिे

हुए बनाए जाएँगे और यह सुनननिि करने के नलए सावधानी बरिी जाएगी नक आग की लपटें, धुआँ, मानचस और अन्य प्रज्वलन स्रोि िोक सल्फर के संचालन के िौरान

उत्पन्न होने वाले धूल के बािलों के संपकय में न आएँ।

(2) िोक सल्फर के नलए सर्ी बाडे गैर-िहनशील ननमायर् के होंगे, पयायप्त रूप से हवािार होंगे और इस प्रकार नडज़ाइन नकए जाएँगे नक कम से कम ऐसे नकनारे हों नजन

पर धूल जम सकिी है।

(3) बाडों में मौजूि िोक सल्फर को इस िरह से संर्ाला जाएगा

नक धूल के बािल कम से कम बनें और इसे संर्ालिे समय नकसी र्ी प्रकार की लौ, धुआँ और मानचस या अन्य प्रज्वलन स्रोिों का इस्िेमाल नहीं नकया जाएगा

और जब र्ी सल्फर को फावडे से या हाि से हटाया जाए, िो नबना नचंगारी वाले औजारों का इस्िेमाल नकया जाएगा।

(4) उस बाडे में जहाँ िोक सल्फर संग्रहीि है, आग, गमी या हाि या नबजली के औजारों के इस्िेमाल से जुडी कोई र्ी मरम्मि नहीं की जाएगी।

17. तरि सल्फर - खुली लपटें, नबजली की नचंगाररयाँ और अन्य प्रज्वलन स्रोि

नजनमें धुआँ और मानचस शानमल हैं, नपघले हुए सल्फर के आसपास के क्षेत्र से बाहर रखे जाएँगे।

[PART IV

DELHI GAZETTE : EXTRAORDINARY

111

18. प्रभशिण और पयगिेिण –

(1) सर्ी नवद्युि र्रट्टयाँ और सर्ी संयंत्र नजनमें काबयन डाइसल्फाइड का संघनन, शोधन या र्ंडारर् नकया जािा है, र्रट्टयों और संयंत्र के संचालन के िौरान हर समय

पयायप्त ननगरानी में रहेंगे।

(2) नवद्युि र्रट्टयों और संयंत्रों के संचालन और रखरखाव के प्रर्ारी कमयचारी उनचि रूप से योग्य और पयायप्त रूप से प्रनशनक्षि होंगे।

19. धुिाई सुभिधाएँ –

(1) अनधर्ोगी सर्ी ननयोनजि व्यनियों के उपयोग के नलए स्वच्छ और अच्छी मरम्मि की हुई धुलाई की जगह उपलब्ध कराएगा और उसका रखरखाव करेगा। नजसमें

कम से कम एक नल या स्टैंड-पाइप लगा हो और प्रत्येक पाँच व्यनियों के नलए स्वच्छ जल की ननरंिर आपूनिय हो। नल या स्टैंड-पाइप के बीच कम से कम 120

सेंटीमीटर की िूरी हो और पयायप्त मात्रा में साबुन और साफ िौनलये उपलब्ध हों। बशिे नक ननरीक्षक-सह-सुनवधाकिाय द्वारा आिेश निए जाने पर प्रत्येक कमयचारी को अलग

से िौनलये निए जाएँ।

(2) सल्फर र्ंडारर्, संचालन और नपघलने के कायों में काययरि सर्ी श्रनमकों को नेल ब्रश उपलब्ध कराया जाएगा।

20. व्यभक्तर्त सुरिा उपकरण -

(1) उपयुि चश्मे और सुरक्षात्मक वस्त्र, नजनमें नबना पैकेट वाले ओवरऑल, िस्िाने और जूिे शानमल हैं, श्रनमकों के उपयोग के नलए उपलब्ध कराए जाएंगे -

(क) िरल पिािय आनि को ननयंनत्रि करने वाले वाल्व या कॉक संचानलि करिे समय,

(ख) सल्फर पॉट से नपघला हुआ सल्फर ननकालिे समय;

(ग) चारकोल या सल्फर को संर्ालिे समय।

(2) उपयुि श्वसन सुरक्षा उपकरर् उपलब्ध कराए जाएंगे और

असामान्य पररनस्िनियों या आपाि नस्िनि में उपयोग के नलए उपयुि स्िान पर संग्रनहि नकए जाएंगे।

(3) ऐसे सर्ी सुरक्षात्मक उपकरर्ों की उनचि और कुशल सफाई की व्यवस्िा की जाएगी।

21. क्िोकरूम - प्रनियाओं में काययरि सर्ी व्यनियों के उपयोग के नलए एक उपयुि क्ट्लोकरूम उपलब्ध कराया जाएगा और उसका रखरखाव नकया जाएगा, नजसमें

काम के घंटों के िौरान उिारे जाने वाले कपडों के नलए और क्ट्लोकरूम से अलग एक उपयुि स्िान, ओवरऑल या काम के कपडों के र्ंडारर् के नलए उपलब्ध कराया

जाएगा। इस प्रकार प्रिान की गई व्यवस्िा एक नजम्मेिार व्यनि के प्रर्ार में होगी और उसे साफ-सुिरा रखा जाएगा।

22. अनभधकृत व्यभक्त - केवल रखरखाव और मरम्मि कमी, संयंत्र संचालन से सीधे जुडे व्यनि और

प्रानधकृि व्यनियों के साि आने वाले व्यनियों को ही संयंत्र में प्रवेश निया जाएगा।

.....................

अनुसूची - XXIII

उच्च ध्िभन स्तर और

कंपन स्तर िािे संचािन

िार्-क उच्च ध्िभन स्तर

1. अनुप्रयोर् - अनुसूची का यह र्ाग उच्च ध्वनन स्िर वाली नकसी र्ी नवननमायर् प्रनिया के सर्ी संचालनों पर लागू होगा।

2. पररिाषाएँ - इस अनुसूची के प्रयोजन के नलए -

(क) "शोर" का अिय कोई र्ी अवांनछि ध्वनन है।

(ख) "उच्च शोर स्िर" का अिय है र्ाररि पैमाने पर मापा गया कोई र्ी शोर स्िर 85 डेसीबल या उससे अनधक है।

112

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(ग) "डेसीबल" का अिय है "डेसीबल" का िसवाँ र्ाग, जो नक लघुगर्कीय पैमाने का मूलर्ूि नवर्ाजन है नजसका उपयोग िो नननियष्ट या नननहि रानशयों के अनुपाि को

व्यि करने के नलए नकया जािा है। ऐसे अनुपाि को िशायने वाले "डेसीबल" की संख्या इस अनुपाि के आधार 10 के लघुगर्क के बराबर होिी है। शोर स्िर (या ध्वनन

िबाव स्िर) 6, 20 x 10 घाि (-6) न्यूटन प्रनि वगय मीटर या 0.0002 डाइन प्रनि वगय सेंटीमीटर के संिर्य िबाव के अनुरूप है, जो श्रवर् सीमा है, अिायि, औसि

स्वस्ि श्रोिाओं में श्रवर् संवेिना उत्पन्न करने के नलए आवश्यक न्यूनिम ध्वनन िबाव स्िर। संनक्षप्त रूप में डेनसबल डेसीबल है।

(घ) "आवृनत्त" िबाव पररवियन की िर है नजसे चिों में प्रनि सेकंड या हट्यज़ में व्यि नकया जािा है।

(ङ) "डीबीए" ध्वनन स्िर को डेनसबल में संिनर्यि करिा है जैसा नक धीमी मीटर प्रनिनिया के साि ए-वेनटंग नेटवकय पर संचानलि ध्वनन स्िर मीटर पर मापा जािा है।

(च) "ए-वेनटंग" का अिय है शोर मापन के उद्देश्य से नवनर्न्न आवृनत्तयों की ध्वनन की िीव्रिा में िनमक समायोजन करना, िानक नकसी उपकरर् द्वारा मापा गया ध्वनन िाब

स्िर मापी गई ध्वनन के प्रनि मानव कान की वास्िनवक प्रनिनिया को प्रनिनबंनबि करे।

3. शोर से सुरिा –

(1) प्रत्येक कारखाने में, जहाँ िक यिोनचि रूप से व्यावहाररक हो, यह सुनननिि करने के नलए उपयुि इंजीननयररंग ननयंत्रर् या प्रशासननक उपाय नकए जाएँगे नक कोई

र्ी कमयचारी िानलका 1 और 2 में नननियष्ट अनधकिम अनुमेय शोर जोनखम स्िरों से अनधक ध्वनन स्िरों के संपकय में न आए।

ताभिका 1

भनरंतर शोर के मामिों में अनुमेय जोभखम

प्रनिनिन कुल एक्ट्सपोज़र समय (ननरंिर स्िर या अल्पकानलक एक्ट्सपोज़र की

संख्या), घंटों में

ध्वनन िाब (डीबीए में)

8

85

6

87

4

90

3

92

1 ½

97

1

100

¾

102

½

105

¼

110

नोट: 1. 110 डीबीए से अनधक के नकसी र्ी एक्ट्सपोज़र की अनुमनि नहीं है।

2. नकसी र्ी आंकडे और स्िंर् 1 में िशायए गए अगले उच्च या ननम्न आंकडे के बीच आने वाली एक्ट्सपोज़र की नकसी र्ी अवनध के नलए, अनुमेय ध्वनन िबाव स्िर

का ननधायरर् आनुपानिक आधार पर एक्ट्सरपलेशन द्वारा नकया जाना है।

ताभिका 2

आिेर् या प्रिाि शोर के अनुमेय जोभखम स्तर

डीबीए में अभधकतम ध्िभन िबाि स्तर

प्रभतभिन आिेर् या प्रिाि की अनुमत संख्या

140

100

135

315

130

1000

125

3160

120

10000

नोट: 1. 140 डीबी नशखर ध्वनन िबाव स्िर से अनधक के प्रिशयन की अनुमनि नहीं है।

2. नकसी र्ी आंकडे और स्िंर् 1 में िशायए गए अगले उच्च या ननम्न आंकडे के बीच आने वाले नकसी र्ी शीर्य ध्वनन िाब स्िर के नलए, प्रनिनिन अनुमि आवेगों या

[PART IV

DELHI GAZETTE : EXTRAORDINARY

113

प्रर्ावों की संख्या आनुपानिक आधार पर अनुमान द्वारा ननधायररि की जानी है।

(2) इस अनुसूची के प्रयोजनों के नलए, यनि शोर स्िर में पररवियन एक सेकंड या उससे कम के अंिराल पर अनधकिम होिे हैं, िो शोर को ननरंिर माना जाएगा और

िानलका 1 में निए गए मानिंड लागू होंगे। अन्य मामलों में, शोर को आवेगी या प्रर्ाव शोर माना जाएगा और िानलका 2 में निए गए मानिंड लागू होंगे।

(3) जब िैननक एक्ट्सपोजर नवनर्न्न स्िरों पर शोर एक्ट्सपोजर की िो या अनधक अवनधयों से बना होिा है, िो प्रत्येक के व्यनिगि प्रर्ाव के बजाय उनके संयुि प्रर्ाव पर

नवचार नकया जाना चानहए। नमनश्रि एक्ट्सपोजर को सीमा मान से अनधक माना जाना चानहए यनि अंशों C1/T1 +C2/T2 + का योग। Cn/Tn यूननटी से अनधक

है, -

जहाँ C1, C2 आनि नननियष्ट शोर स्िर पर वास्िनवक एक्ट्सपोज़र के कुल समय को िशायिे हैं और T1, T2 आनि 90dBA से कम एक्ट्सपोज़र के समय को िशायिे हैं,

उपरोि गर्ना में इन्हें अनिेखा नकया जा सकिा है।

(4) जहाँ उप-ननयम (1) में नननियष्ट स्िरों िक शोर एक्ट्सपोज़र को यिोनचि रूप से व्यावहाररक इंजीननयररंग ननयंत्रर् या प्रशासननक उपायों द्वारा कम करना संर्व नहीं है,

वहाँ शोर एक्ट्सपोज़र को ऐसे ननयंत्रर् उपायों द्वारा यिासंर्व अनधकिम सीमा िक कम नकया जाएगा, और इस प्रकार एक्ट्सपोज़र में आने वाले प्रत्येक कमयचारी को उपयुि

कान रक्षक प्रिान नकए जाएँगे िानक शोर एक्ट्सपोज़र को उप-ननयम (1) में नननियष्ट स्िरों िक कम नकया जा सके।

(5) जहाँ उप-अनुच्छेि (2) के अनुसार प्रिान नकए गए और नकसी कमयचारी द्वारा पहने गए कान रक्षक, उसके कान के पास पहुँचने वाले शोर को कम नहीं कर पािे हैं,

जैसा नक मापे गए ध्वनन िबाव स्िर से संबंनधि कान रक्षक के डीबीए में क्षीर्न मान को घटाकर ननधायररि नकया जािा है, िानलका 1 या िानलका 2 के िहि अनुमेय स्िर

िक, जैसा र्ी मामला हो, शोर जोनखम अवनध को उप-अनुच्छेि (1) में नननियष्ट अनुमेय शोर जोनखम के अनुरूप उपयुि रूप से कम नकया जाएगा।

(6) (क) उन सर्ी मामलों में जहाँ प्रचनलि ध्वनन स्िर उप-अनुच्छेि (1) में नननियष्ट अनुमेय स्िरों से अनधक हैं, वहाँ एक प्रर्ावी श्रवर् संरक्षर् काययिम लागू नकया

जाएगा, नजसमें अन्य श्रवर् संरक्षर् उपायों के साि-साि अनुमेय स्िरों से अनधक शोर के संपकय में आने वाले श्रनमकों पर पूवय-ननयोजन और आवनधक श्रवर् सवेक्षर्

शानमल होंगे, और ऐसे श्रनमकों का पुनवायस या िो शोर के संपकय में आने वाले स्िर को कम करके या उन्हें ऐसे स्िानों पर स्िानांिररि करके नकया जाएगा जहाँ शोर का

स्िर अपेक्षाकृि कम हो या नकसी अन्य उपयुि माध्यम से नकया जाएगा।

4. भचभकत्सा अभधकारी द्वारा भचभकत्सा परीिण- (1) अनधर्ोगी यह सुनननिि करेगा नक नजन श्रनमकों के उच्च शोर स्िर के संपकय में आने की संर्ावना है, उनका

वर्य में एक बार आवनधक नचनकत्सा परीक्षर् नकया जाए। नचनकत्सा परीक्षर् में वे परीक्षर् शानमल होंगे नजन्हें नचनकत्सा अनधकारी उनचि समझे। और इसमें 125, 250,

500, 1000, 2000, 4000 और 8000 चि प्रनि सेकंड के शुि स्वरों के नलए श्रवर् सीमा का ननधायरर् शानमल होगा।

(2) उच्च शोर स्िर के संपकय में आने वाले प्रत्येक श्रनमक की उसके पहले रोजगार के 15 निनों के र्ीिर एक नचनकत्सा अनधकारी द्वारा जांच की जाएगी। नकसी र्ी

श्रनमक को कारखाने में उसके पहले रोजगार के 15 निनों के बाि काम करने की अनुमनि नहीं िी जाएगी, जब िक नक नचनकत्सा अनधकारी द्वारा उसे ऐसे रोजगार के नलए

उपयुि प्रमानर्ि न कर निया जाए।

(3) उच्च ध्वनन वाली प्रनिया में काययरि प्रत्येक कमयचारी की प्रत्येक 12 माह में कम से कम एक बार नचनकत्सा अनधकारी द्वारा पुनिः जाँच की जाएगी और ऐसी जाँच

में, जहाँ र्ी नचनकत्सा अनधकारी उनचि समझे उप-अनुच्छेि (1) के सर्ी परीक्षर् शानमल होंगे।

(4) नचनकत्सा अनधकारी, कमयचारी की जाँच के बाि, प्रपत्र-24 में स्वास््य प्रमार्पत्र जारी करेगा। की गई जाँच और पुनिः जाँच का ररकॉडय प्रमार्पत्र में िजय नकया जाएगा

और प्रमार्पत्र कारखाने के अनधर्ोगी की अनर्रक्षा में रखा जाएगा। उप-अनुच्छेि (1) और (2) के अंिगयि की गई प्रत्येक जाँच का ररकॉडय, नजसमें इस परीक्षर् की

प्रकृनि और पररर्ाम शानमल हैं, नचनकत्सा अनधकारी द्वारा प्रपत्र-05 में एक स्वास््य रनजस्टर में र्ी िजय नकया जाएगा।

(5) स्वास््य प्रमार्पत्र और स्वास््य रनजस्टर को ननरीक्षक-सह-सुनवधाकिाय द्वारा ननरीक्षर् के नलए

ित्परिापूवयक उपलब्ध रखा जाएगा।

(6) यनि नकसी र्ी समय नचनकत्सा अनधकारी की राय में कोई कमयचारी उि प्रनियाओं में इस आधार पर रोजगार के नलए उपयुि नहीं है नक उसमें बने रहने से कमयचारी

के स्वास््य को नवशेर् खिरा होगा,

िो वह अपने ननष्ट्कर्ों को उि प्रमार्पत्र और स्वास््य रनजस्टर में िजय करेगा। इन िस्िावेजों में उसके ननष्ट्कर्ों की प्रनवनष्ट में वह अवनध र्ी शानमल होनी चानहए नजसके

नलए वह समझिा है नक उि व्यनि उि प्रनिया में काम करने के नलए अयोग्य है। उसे वैकनल्पक ननयुनि सुनवधाएँ प्रिान की जाएँगी, जब िक नक वह नचनकत्सा अनधकारी

की राय में पूरी िरह से अक्षम न हो, ऐसी नस्िनि में प्रर्ानवि व्यनि का उपयुि पुनवायस नकया जाएगा।

114

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(7) कोई र्ी व्यनि जो उप-अनुच्छेि (6) में बिाए अनुसार काम करने के नलए अयोग्य पाया गया है, उसे उि प्रनियाओं में िब िक पुनिः ननयोनजि या काम करने की

अनुमनि नहीं िी जाएगी जब िक नक नचनकत्सा अनधकारी, आगे की जाँच के बाि, उसे पुनिः उन प्रनियाओं में रोजगार के नलए योग्य प्रमानर्ि न कर िे।

िार्-ख

उच्च कंपन स्तर

1. अनुप्रयोर्

अनुसूची का यह र्ाग प्रनिया के नकसी र्ी नवननमायर् र्ाग में सर्ी प्रचालनों पर लागू होगा नजसमें उच्च अवांनछि कंपन हों।

2. पररिाषा:

(क) "िैननक जोनखम" का अिय यांनत्रक कंपन की वह मात्रा है नजससे कोई श्रनमक कायय निवस के िौरान प्रर्ानवि होिा है, नजसमें कंपन की िीव्रिा और अवनध को ध्यान

में रखा जािा है;

(ख) "कंपन" का अिय एक यांनत्रक घटना है जहाँ संिुलन नबंिु के आसपास िोलन होिे हैं। ये िोलन आवनधक या यादृनच्छक हो सकिे हैं।

(ग) "उच्च कंपन" का अिय खंड-3 में नननियष्ट जोनखम सीमा मान और निया मान से अनधक कोई र्ी जोनखम है।

(घ) "जोनखम निया मान" का अिय नकसी र्ी श्रनमक के नलए खंड-3 में ननधायररि िैननक जोनखम का स्िर है, नजसके पहुँच जाने या उससे अनधक हो जाने पर, जोनखम

को कम करने के नलए नननियष्ट कारयवाई की आवश्यकिा होिी है;

(ङ) "एक्ट्सपोज़र सीमा मान" का अिय नकसी र्ी काययकिाय के नलए िैननक एक्ट्सपोज़र का वह स्िर है नजसे उप-खंड-3 में नननियष्ट सीमा से अनधक नहीं नकया जाना चानहए।

(च्‍) "हाि-बाँह कंपन" का अिय है यांनत्रक कंपन जो कायय गनिनवनध के िौरान हािों और बाँहों में संचाररि होिा है;

(छ) "यांनत्रक कंपन" का अिय है नकसी मशीनरी या उपकरर् या वाहन में उसके संचालन के पररर्ामस्वरूप होने वाला कंपन;

और

(ज) "संपूर्य शरीर कंपन" का अिय है यांनत्रक कंपन जो कायय गनिनवनध के िौरान या उप-खंड 3(2) में वनर्यि अनुसार, बैठे या खडे होने पर, सहायक सिह के माध्यम

से शरीर में संचाररि होिा है।

3. एक्सपो र सीमा मान और भिया मान

(1) हाि-बाँह कंपन के नलए

(क) िैननक एक्ट्सपोज़र सीमा मान 5 मीटर/सेकंड 2 ए(8) है;

(ख) िैननक एक्ट्सपोज़र निया मान 2.5 मीटर/सेकंड2A(8) है, और िैननक

एक्ट्सपोज़र नीचे िी गई िानलका 1 में नननियष्ट प्रासंनगक राष्ट्रीय/अंिरायष्ट्रीय मानकों में ननधायररि आधार पर ननधायररि नकया जाएगा।

(2) संपूर्य शरीर कंपन के नलए

(क) िैननक एक्ट्सपोज़र सीमा मान 1.15 मीटर/सेकंड2A(8) है;

(ख) िैननक एक्ट्सपोज़र निया मान 0.5 मीटर/सेकंड2A(8) है, और िैननकएक्ट्सपोज़र नीचे िी गई िानलका

1 में नननियष्ट प्रासंनगक राष्ट्रीय/अंिरायष्ट्रीय मानकों में ननधायररि आधार पर ननधायररि नकया जाएगा।

ताभिका 1

भत्र-आयामी प्रणािी में अिों की X, Y, या Z भिशा में कंपन के भिए हार्थ के संपकग हेतु सीमा मान (टीएििी) नीचे भिए र्ए अनुसार होंर्े:

कुि िैभनक एक्सपो र

िाररत अिभध (र्ंटे)

आिृभत्त का अभधकतम मान

4 घंटे और उससे अनधक पर 8 घंटे से कम

4

2 घंटे और उससे अनधक पर 4 घंटे से कम

6

1 घंटे और उससे अनधक पर 2 घंटे से कम

8

1 घंटे से कम

12

3 कंपन जोभखम का आकिन प्रत्येक िार्ू

निशा (X, Y, Z) के नलए नकया जाएगा क्ट्योंनक कंपन एक सनिश रानश (पररमार् और निशा) है। प्रत्येक निशा में, नबजली उपकरर्, मशीन या कायय वस्िु के सामान्य

[PART IV

DELHI GAZETTE : EXTRAORDINARY

115

संचालन के िौरान कंपन का पररमार्, आवृनत्त-र्ाररि घटक त्वरर् के मूल-माध्य-वगय (RMS) मान द्वारा, मीटर प्रनि वगय सेकंड (m/s2) की इकाइयों में व्यि नकया

जाना चानहए।

4. कायगस्र्थि पर कंपन के कारण स्िास््य को होने िािे जोभखम का आकिन

(1) कोई अनधर्ोगी जो ऐसा कायय करिा है नजससे नकसी र्ी कमयचारी को कंपन के संपकय में आने का खिरा हो, उसे उस कायय से उत्पन्न जोनखम का उपयुि और पयायप्त

आकलन करना होगा और जोनखम आकलन में उन ननयंत्रर् उपायों की पहचान की जाएगी नजन्हें अपनाया जाना आवश्यक है।

(2) जब र्ी यह महसूस हो नक प्रनिया में पररवियन के कारर् पूवय का जोनखम आकलन अब मान्य नहीं है, िो जोनखम आकलन की समीक्षा की जानी चानहए।

5. इंजीभनयररंर् भनयंत्रण उपाय

1. (क) जहाँ यह उनचि रूप से संर्व न हो, अनधर्ोगी यह सुनननिि करेगा नक कमयचाररयों के कंपन के संपकय में आने से होने वाले जोनखम को या िो स्रोि पर ही समाप्त

कर निया जाए या, जहाँ यह उनचि रूप से व्यावहाररक न हो, उसे अनुच्छेि के अनुसार स्रोि पर जोनखम को समाप्त करने के नलए यिासंर्व कम स्िर िक कम कर निया

जाए।

(ख) और यनि नकसी जोनखम कारयवाई मूल्य िक पहुँचने या उससे अनधक होने की संर्ावना है, िो ननयोिा इस प्रकार की गनिनवनध के नलए उपयुि इंजीननयररंग ननयंत्रर्

उपायों का एक काययिम स्िानपि और कायायनन्वि करके, जोनखम को यिासंर्व कम स्िर िक कम करेगा।

(ग) अनधर्ोगी यह सुनननिि करेगा नक श्रनमकों को ननम्ननलनखि उपाय उपलब्ध कराए जाएँ:-

(i) उपयुि एगोनॉनमक नडज़ाइन के कायय उपकरर् जो, नकए जाने वाले कायय को ध्यान में रखिे हुए, न्यूनिम कंपन उत्पन्न करिे हैं;

(ii) सहायक उपकरर्ों का प्रावधान जो कंपन के कारर् होने वाली चोटों के जोनखम को कम करिे हैं; और कायय उपकरर्, काययस्िल और काययस्िल प्रर्ानलयों के नलए

उपयुि रखरखाव काययिम स्िानपि करेगा;

(iii) उप-खंड 5 के अधीन, ननयोिा यह सुनननिि करेगा नक उसके कमयचारी एक जोनखम सीमा मूल्य से अनधक कंपन के संपकय में न आएँ; और सीमा पार होने के

कारर्ों की पहचान करने के नलए आवश्यक किम उठाएगा और कंपन के संपकय को सीमा मूल्य से नीचे लाने के नलए उनचि किम उठाएगा।

यह उपबंनधि है नक नकसी र्ी कमयचारी का कंपन के संपकय में आना आमिौर पर संपकय कारयवाई मूल्य से कम होिा है, लेनकन समय-समय पर इसमें काफी नर्न्निा होिी

है और कर्ी-कर्ी संपकय सीमा मूल्य से अनधक हो सकिा है।

परन्‍िु यह र्ी उपबंनधि है नक- नकसी सप्ताह में कंपन के नकसी र्ी औसि जोनखम का मान जोनखम सीमा मान से कम हो और यह िशायने के नलए साक्ष्य मौजूि हों नक

जोनखम के वास्िनवक पैटनय से होने वाला जोनखम, जोनखम सीमा मान पर ननरंिर जोनखम से संबंनधि जोनखम से कम है; और यह नक (ख) जोनखम नवशेर् पररनस्िनियों

को ध्यान में रखिे हुए, यिासंर्व कम स्िर िक कम नकया जािा है।

6. भचभकत्सा अभधकारी द्वारा भचभकत्सा परीिण-

(1) अनधर्ोगी यह सुनननिि करेगा नक नजन श्रनमकों के ऊपर निए गए जोनखम निया मान पर कंपन के संपकय में आने की आशंका है, उनकी वर्य में एक बार आवनधक

नचनकत्सा जाँच की जाए। नचनकत्सा जाँच में सामान्य और शारीररक जाँच के साि-साि रेनॉड की घटना के नलए नवशेर् परीक्षर् र्ी शानमल होगा।

(2) अनुच्छेि 1 में नननियष्ट प्रनियाओं में ननयोनजि प्रत्येक श्रनमक की उसके प्रिम ननयोजन के 15 निनों के र्ीिर एक नचनकत्सा अनधकारी द्वारा जाँच की जाएगी। नकसी

र्ी श्रनमक को कारखाने में उसके प्रिम ननयोजन के 15 निनों के बाि िब िक काम करने की अनुमनि नहीं िी जाएगी जब िक नक उसे नचनकत्सा अनधकारी द्वारा ऐसे

ननयोजन के नलए उपयुि प्रमानर्ि न कर निया जाए।

(3) मैंगनीज प्रनिया में ननयोनजि प्रत्येक श्रनमक की प्रत्येक 12 महीनों में कम से कम एक बार नचनकत्सा अनधकारी द्वारा पुनिः जाँच की जाएगी और ऐसी जाँच में, जहाँ

र्ी नचनकत्सा अनधकारी उनचि समझे, उप-अनुच्छेि (1) में सर्ी परीक्षर् शानमल होंगे।

116

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(4) नचनकत्सा अनधकारी, श्रनमक की जाँच के बाि, प्रपत्र-24 में एक योग्यिा प्रमार् पत्र जारी करेगा। की गई जाँच और पुनिः जाँच का ररकॉडय प्रमार् पत्र में िजय नकया

जाएगा और प्रमार् पत्र कारखाने के अनधर्ोगी की अनर्रक्षा में रखा जाएगा। उप-अनुच्छेि (1) और (2) के अंिगयि की गई प्रत्येक परीक्षा का ररकॉडय, नजसमें इस परीक्षर्

की प्रकृनि और पररर्ाम शानमल हैं, नचनकत्सा अनधकारी द्वारा फॉमय-25 में स्वास््य रनजस्टर में र्ी िजय नकया जाएगा।

(5) नफटनेस प्रमार्पत्र और स्वास््य रनजस्टर ननरीक्षक-सह-सुनवधाप्रिािा द्वारा ननरीक्षर् हेिु आसानी से उपलब्ध रखे जाएँगे।

(5) स्वास््य प्रमार्पत्र और स्वास््य रनजस्टर ननरीक्षक-सह-सुनवधाप्रिािा द्वारा ननरीक्षर् हेिु ित्परिापूवयक उपलब्ध रखे जाएँगे।

(6) यनि नकसी र्ी समय नचनकत्सा अनधकारी की यह राय हो नक कोई कमयचारी उि प्रनियाओं में इस आधार पर ननयोजन के नलए अब उपयुि नहीं है नक उसमें बने

रहने से उसके स्वास््य को नवशेर् खिरा होगा, िो वह उि प्रमार्पत्र और स्वास््य रनजस्टर में अपने ननष्ट्कर्ों का अनर्लेख बनाएगा। इन िस्िावेजों में उसके ननष्ट्कर्ों की

प्रनवनष्ट में वह अवनध र्ी शानमल होनी चानहए नजसके नलए वह समझिा है नक उि व्यनि उि प्रनिया में कायय करने के नलए अयोग्य है। उसे वैकनल्पक स्िान-स्िापन

सुनवधाएँ प्रिान की जाएँगी, जब िक नक वह नचनकत्सा अनधकारी की राय में पूरी िरह से अक्षम न हो जाए। ऐसी नस्िनि में प्रर्ानवि व्यनि का उनचि पुनवायस नकया

जाएगा।

(7) कोई र्ी व्यनि, जो उप-अनुच्छेि (5) में उनल्लनखि अनुसार कायय करने के नलए अयोग्य पाया गया हो, उसे उि प्रनियाओं में पुनिः ननयोनजि या कायय करने की

अनुमनि नहीं िी जाएगी, जब िक नक नचनकत्सा अनधकारी, आगे की जाँच के बाि, उसे उन प्रनियाओं में ननयोजन के नलए पुनिः योग्य प्रमानर्ि न कर िे।

7. व्यभक्तर्त सुरिा उपकरण

(1) अनधर्ोगी यह सुनननिि करेगा नक नजन श्रनमकों के उच्च स्िर के कंपन के संपकय में आने की संर्ावना है, उन्हें राष्ट्रीय या अंिरायष्ट्रीय मानकों के अनुरूप उपयुि

पीपीई और सुरक्षात्मक वस्त्र प्रिान नकए जाएँ। ऐसे व्यनिगि सुरक्षा उपकरर्ों में िस्िाने और सुरक्षा जूिे शानमल होने चानहए। सुरक्षात्मक वस्त्र श्रनमकों को ठंड और धूल से

बचाने में सक्षम होने चानहए।

(2) अनधर्ोगी यह सुनननिि करेगा नक श्रनमकों को व्यनिगि सुरक्षा उपकरर्ों के उपयोग, िेखर्ाल और रखरखाव का समय-समय पर प्रनशक्षर् निया जाए।

8. प्रशासभनक भनयंत्रण उपाय

(1) अनधर्ोगी यह सुनननिि करेगा नक जहाँ िक संर्व हो, सर्ी आवश्यक ननयंत्रर् उपाय नकए जाएँ िानक यह सुनननिि हो सके नक अवांनछि कंपन उस प्रनिया में

काययरि श्रनमकों के स्वास््य को प्रर्ानवि न करें नजस पर अनुसूची का यह र्ाग लागू होिा है।

(2) अनधर्ोगी सर्ी श्रनमकों को उप-खंड-3 में उनल्लनखि जोनखम सीमा मानों और कारयवाई मानों को सीनमि करने के नलए अपनाई जाने वाली जानकारी, ननिेश और

प्रनशक्षर् प्रिान करेगा।

(3) अनुच्छेि (1) की व्यापकिा पर प्रनिकूल प्रर्ाव डाले नबना, उस अनुच्छेि के अंिगयि प्रिान की गई जानकारी, ननिेश और प्रनशक्षर् में ननम्ननलनखि शानमल होंगे:

I. उप-खंड-3 में ननधायररि जोनखम सीमा मान और कारयवाई मान।

II. कंपन के जोनखम को कम करने के नलए सुरनक्षि कायय पिनियाँ; और

III. कमयचाररयों के नलए उपयुि और पयायप्त जानकारी और प्रनशक्षर्, िानक कायय उपकरर्ों का सही और सुरनक्षि उपयोग नकया जा सके, िानक कंपन के जोनखम को

कम नकया जा सके;

IV. कंपन के जोनखम की अवनध और पररमार् की सीमा;

V. पयायप्त नवश्राम अवनध के साि उपयुि कायय अनुसूनचयाँ; और

VI. अनुच्छेि (2) द्वारा अपेनक्षि जानकारी, ननिेश और प्रनशक्षर् को ननयोिा द्वारा नकए जाने वाले कायय के प्रकार या उपयोग की जाने वाली कायय पिनियों में महत्वपूर्य

पररवियनों को ध्यान में रखिे हुए अद्यिन नकया जाएगा।

(4) अनधर्ोगी को उन प्रमुख स्िानों पर नचत्रात्मक चेिावनी सूचनाएँ/चेिावनीसंकेि प्रिनशयि करने होंगे जहाँ श्रनमकों के अवांनछि उच्च कंपन के संपकय में आने की

आशंका हो।

9. र्िगिती मभहिाओं, भकशोरों और भिव्यांर् व्यभक्तयों के भनयोजन पर प्रभतबंध-

नकसी र्ी गर्यविी मनहला, नकशोर या निव्यांग व्यनि को अनुसूची के इस र्ाग में शानमल प्रनिया में ननयोनजि नहीं नकया जाएगा।

[PART IV

DELHI GAZETTE : EXTRAORDINARY

117

10. छूट

यनि नकसी कारखाने के संबंध में, मुख्य ननरीक्षक-सह-सुनवधाप्रिािा संिुष्ट है नक नकसी असाधारर् पररनस्िनि के कारर्, या प्रनिया के अननयनमि होने के कारर्, या नकसी

अन्य कारर् से, इस अनुसूची के सर्ी या नकसी र्ी प्रावधान का अनुप्रयोग ऐसे कारखाने में ननयोनजि व्यनियों की सुरक्षा के नलए आवश्यक नहीं है, िो वह नलनखि

आिेश द्वारा, नजसे वह अपने नववेकानुसार रद्द कर सकिा है, ऐसे कारखाने को उि मामले में नननियष्ट शिों और अवनध के सर्ी या नकसी र्ी प्रावधान से छूट िे सकिा है।

..........................

अनुसूची – XXIV

खतरनाक कीटनाशकों का भनमागण या कायग-संचािन

1. अनुप्रयोर् - यह अनुसूची उन सर्ी कारखानों या उनके नकसी र्ी र्ाग के संबंध में लागू होगी नजनमें खिरनाक कीटनाशक के ननमायर् या कायय-संचालन

की प्रनिया की जािी है, नजसे आगे उि नवननमायर् प्रनिया कहा जाएगा।

2. पररिाषाएँ - इस अनुसूची के प्रयोजन के नलए -

(क) "खिरनाक कीटनाशक" का अिय है कोई र्ी उत्पाि जो नकसी कीट को ननयंनत्रि करने, नष्ट करने या र्गाने या वृनि को रोकने या ऐसी वृनि के प्रर्ावों

को कम करने के नलए प्रस्िानवि या उपयोग नकया जािा है, नजसमें इसका कोई र्ी सूत्रीकरर् शानमल हैं, नजसे कीटनाशक अनधननयम,

1968 और उसके अंिगयि बनाए गए ननयमों के अंिगयि नवर्ाि माना जािा है और जो इसके अंिगयि आिा है और कोई अन्य उत्पाि, नजसे सरकार द्वारा

समय-समय पर अनधसूनचि नकया जा सकिा है;

(ख) "कायय-संचालन" में नमश्रर्, सनम्मश्रर्, सूत्रीकरर्, र्रना, खाली करना, पैनकंग या अन्यिा संर्ालना शानमल है;

(ग) "कुशल एग्‍जॉस्‍ट ड्रै्ट" का अिय है धुआँ, गैस, वाष्ट्प, धूल, धुआँ या धुंध को हटाने के नलए स्िानीयकृि यांनत्रक वेंनटलेशन िानक उन्हें कायय कक्ष की

हवा में फैलने से रोका जा सके जहाँ कायय नकया जा रहा है। कोई र्ी एग्‍जॉस्‍ट ड्रै्ट कुशल नहीं माना जाएगा यनि वह उस नबंिु पर उत्पन्न धुआँ हटाने में

नवफल रहिा है जहाँ से ऐसी गैस, धुआँ, धूल, वाष्ट्प या धुंध प्रनिया से उत्पन्न होिी है।

3. िभमकों के भिए भनिेश - प्रत्येक श्रनमक को अपने पहले ननयोजन पर उि नवननमायर् प्रनिया में प्रयुि रसायनों के खिरनाक गुर्ों सनहि गुर्ों और

उनसे जुडे खिरों के बारे में पूरी िरह से ननिेश निया जाएगा। कमयचाररयों को नकसी र्ी आपाि नस्िनि से ननपटने के नलए नकए जाने वाले उपायों के बारे में

र्ी ननिेश निया जाएगा। ऐसे ननिेशों को समय-समय पर िोहराया जाएगा।

4. चेतािनी सूचना और प्िेकाडग - इस अनुसूची के पररनशष्ट में नननियष्ट प्रारूप में और अनधकांश श्रनमकों की र्ार्ा में मुनद्रि चेिावनी सूचनाएँ और प्लेकाडय

उन सर्ी काययस्िलों पर प्रिनशयि नकए जाएँगे जहाँ उि नवननमायर् प्रनिया की जािी है िानक श्रनमक उन्हें आसानी से और सुगमिा से पढ सकें। कारखाने के

अनधष्ठािा और प्रबंधक द्वारा समय-समय पर श्रनमकों को उि नवननमायर् प्रनिया से उत्पन्न होने वाले स्वास््य खिरों और सुरक्षा के िरीकों के बारे में ननिेश

िेने की व्यवस्िा की जाएगी। ऐसी सूचनाओं में श्रनमकों के स्वास््य की र्नवष्ट्यवार्ी के नलए आवश्यक आवनधक नैिाननक परीक्षर्ों के बारे में संनक्षप्त ननिेश

शानमल होंगे।

5. र्िगिती मभहिाओं या भकशोरों के भनयोजन से संबंभधत भनषेध

- नकसी र्ी गर्यविी मनहला या नकशोर को ऐसे नकसी र्ी कमरे में ननयोनजि या काम करने की अनुमनि नहीं िी जाएगी जहाँ उि नवननमायर् प्रनिया की जािी

है या ऐसे नकसी र्ी कमरे में जहाँ खिरनाक कीटनाशक संग्रहीि है।

6. खाद्य-पेय और धूम्रपान भनषेध - (1) नकसी र्ी कमयचारी द्वारा नकसी र्ी कायय-कक्ष में, जहाँ उि नवननमायर् प्रनिया की जािी है, कोई र्ी खाद्य, पेय,

िंबाकू, पान या सुपारी नहीं लाई जाएगी और न ही उसका सेवन नकया जाएगा।

(2) नकसी र्ी कायय-कक्ष में, जहाँ उि नवननमायर् प्रनिया की जािी है, धूम्रपान नननर्ि होगा।

7. सुरिात्मक िस्त्र और सुरिात्मक उपकरण - (1) उि नवननमायर् प्रनिया में काययरि सर्ी कमयचाररयों के नलए सुरक्षात्मक वस्त्र उपलब्ध कराए जाएँगे,

नजनमें लंबी पैंट और शटय या लंबी आस्िीन वाले चौगा और नसर ढकने वाले कपडे शानमल होंगे।

118

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(2) (क) उि नवननमायर् प्रनिया में काययरि सर्ी कमयचाररयों के नलए सुरक्षात्मक उपकरर् उपलब्ध कराए जाएँगे, नजनमें रबर के िस्िाने, गम बूट, रबर के

एप्रन, रासायननक सुरक्षा चश्मे और श्वासयंत्र शानमल होंगे।

(ख) जहाँ कीटनाशक में िेल हो, वहाँ िस्िाने, जूिे, एप्रन नसंिेनटक रबर से बने होंगे।

(3) ऐसे कपडों और उपकरर्ों के साि निए गए सुरक्षात्मक कपडे और उपकरर् कामगारों द्वारा पहने जाने चानहए।

(4) यनि कामगार ननकोटीन या फॉस्फोरस युि कीटनाशकों को संर्ालिे हैं, िो सुरक्षात्मक कपडों और उपकरर्ों को अंिर और बाहर से रोज़ाना धोया

जाना चानहए और यनि अन्य कीटनाशकों को संर्ालिे हैं, िो उन्हें बार-बार धोया जाना चानहए।

(5) सुरक्षात्मक कपडों और उपकरर्ों को अच्छी नस्िनि में रखा जाना चानहए।

8. फशय और कायय-बेंच - (1) प्रत्येक कायय कक्ष में जहाँ खिरनाक कीटनाशकों का उपयोग नकया जािा है, फशय सीमेंट या अन्य अर्ेद्य सामग्री का होना

चानहए नजससे सिह नचकनी हो।

(2) फशय की अच्छी मरम्मि की जानी चानहए, नाली की ओर जाने वाला पयायप्त ढलान प्रिान नकया जाना चानहए और निन में एक बार नली से अच्छी िरह

धोया जाना चानहए।

(3) नजन कायय-बेंचों पर खिरनाक कीटनाशकों का प्रयोग नकया जािा है, वे

नचकनी, अवशोर्क सामग्री, अनधमानििः स्टेनलेस स्टील, से बने होंगे और

निन में कम से कम एक बार साफ नकए जाने चानहए।

9. ररसाि और अपभशष्ट - (1) यनि नकसी खिरनाक कीटनाशक के प्रयोग के िौरान वह कायय-बेंच, फशय या नकसी कमयचारी द्वारा पहने गए सुरक्षात्मक

कपडों पर छलक जाए या नगर जाए, िो ऐसे क्षेत्रों या वस्िुओं को पूरी िरह से संिूनर्ि करने के नलए ित्काल कारयवाई की जाएगी।

(2) खिरनाक कीटनाशक से र्ीगे या गंिे कपडे, नचिडे, कागज़ या अन्य सामग्री को नकसी उपयुि पात्र में, कसकर ढक्ट्कन लगाकर, रखा जाएगा। िूनर्ि

अपनशष्ट को सप्ताह में कम से कम एक बार जलाकर नष्ट नकया जाएगा।

(3) उपयुि नननष्ट्ियकारी कारक, जहाँ उपलब्ध हों, ररसाव की जाँच के िौरान उपयोग के नलए आसानी से सुलर् स्िान पर रखे जाएँगे।

(4) संयंत्र के सर्ी र्ागों िक सफाई, रखरखाव और मरम्मि के नलए आसान पहुँच के साधन उपलब्ध कराए जाएँगे।

10. खतरनाक कीटनाशकों के भिए इस्तेमाि भकए जाने िािे खािी कंटेनर - खिरनाक कीटनाशकों के नलए इस्िेमाल नकए जाने वाले कंटेनरों को

उनकी सामग्री से पूरी िरह साफ नकया जाएगा और उन्हें फेंकने या नष्ट करने से पहले नननष्ट्िय करने वाले एजेंट से उपचाररि नकया जाएगा।

11. मैनुअि हैंडभिंर् - (1) नकसी खिरनाक कीटनाशक को लंबे हैंडल वाले स्कूप के अलावा हाि से इस्िेमाल करने की आवश्यकिा नहीं होगी या

अनुमनि नहीं होगी।

(2) खिरनाक कीटनाशक के प्रयोग के िौरान शरीर के नकसी र्ी अंग का उसके सीधे संपकय में आने से बचना चानहए।

12. िेंभटिेशन - (1) प्रत्येक कायय कक्ष या क्षेत्र में जहाँ खिरनाक कीटनाशक का प्रयोग नकया जािा है, वहाँ हर समय िाज़ी हवा के संचार द्वारा पयायप्त

वेंनटलेशन प्रिान नकया जाना चानहए।

(2) जब िक प्रनिया पूरी िरह से बंि न हो, खिरनाक कीटनाशक के प्रयोग के िौरान ननम्ननलनखि कायय कुशल एग्‍जॉस्‍ट ड्रा्ट के नबना नहीं नकए जाने

चानहए:-

(क) खिरनाक कीटनाशक वाले कंटेनर को खाली करना;

(ख) खिरनाक कीटनाशक का सनम्मश्रर्;

(ग) खिरनाक कीटनाशक युि िरल या पाउडर िैयार करना; और

(घ) कंटेनर, टैंक हॉपर या मशीन या छोटे आकार के कंटेनरों में खिरनाक कीटनाशक को बिलना या र्रना।

(3) उपरोि कायय में प्रिान नकए गए एग्‍जॉस्‍ट ड्रा्ट के नवफल होने की नस्िनि में, उि कायय िुरंि रोक निए जाएँगे।

(4) (i) धूल के ननष्ट्कर्यर् या िमन के नलए सर्ी उपकरर्ों की प्रत्येक छह माह में कम से कम एक बार सक्षम व्यनि द्वारा जाँच और परीक्षर् नकया जाएगा,

और ऐसी जाँच और परीक्षर् द्वारा प्रकट नकसी र्ी िोर् को यिाशीघ्र ठीक नकया जाएगा।

(ii) ऐसी जाँच और परीक्षर्ों के नववरर् वाला एक रनजस्टर प्रपत्र-50 में रखा जाएगा।

[PART IV

DELHI GAZETTE : EXTRAORDINARY

119

13. धुिाई के भिए अनुमत समय - (1) प्रत्येक र्ोजन से पहले और निन के कायय की समानप्त से पहले, खिरनाक कीटनाशकों के संचालन में लगे

प्रत्येक कमयचारी को ननयनमि नवश्राम अंिराल के अनिररि कम से कम िस नमनट धुलाई के नलए निए जाएँगे।

(2) खिरनाक कीटनाशकों के संचालन में लगे प्रत्येक कमयचारी को कोई र्ी र्ोजन करने से पहले और निन के कायय के अंि में र्ी, अच्छी िरह से नहाना

होगा।

14. धुिाई और स्नान की सुभिधाएँ - (1) कारखाने में काययरि सर्ी श्रनमकों के उपयोग के नलए, जहाँ उि नवननमायर् प्रनिया की जािी है, पयायप्त धुलाई

और स्नान के स्िान उपलब्ध कराए जाएँगे और उन्हें साफ-सुिरी और अच्छी मरम्मि में रखा जाएगा, नजसमें प्रत्येक 5 व्यनियों के नलए एक ऐसे स्िान की

िर से, पानी की ननरंिर आपूनिय हो।

(2) धुलाई स्िलों में कम से कम एक मीटर के अंिराल पर स्टैंडपाइप लगाए जाएंगे।

(3) धुलाई स्िलों की कुल संख्या के कम से कम आधे स्िानों में स्नानघर उपलब्ध कराए जाएंगे।

(4) उपयुि सामग्री से बने साफ िौनलयों की पयायप्त आपूनिय उपलब्ध कराई जाएगी:

परन्‍िु, यह उपबंनधि है नक ननरीक्षक-सह-सुनवधाप्रिािा द्वारा आिेश निए जाने पर प्रत्येक कमयचारी के नलए अलग-अलग ऐसे िौनलयों की आपूनिय की जाएगी।

(5) साबुन और नेल ब्रश की पयायप्त आपूनिय उपलब्ध कराई जाएगी।

15. क्िॉकरूम - कारखाने में काययरि सर्ी कमयचाररयों के उपयोग के नलए, जहाँ उि नवननमायर् प्रनिया की जािी है, ननम्ननलनखि की व्यवस्िा और

रखरखाव नकया जाएगा -

(क) काम के घंटों के िौरान उिारे गए कपडों के नलए एक क्ट्लॉकरूम, नजसमें गीले कपडों को सुखाने के नलए पयायप्त व्यवस्िा हो; और

(ख) अनुच्छेि 7 के अंिगयि प्रिान नकए गए सुरक्षात्मक कपडों के र्ंडारर् के नलए अलग और उपयुि व्यवस्िा।

16. िोजन कि - (1) उस कारखाने में काययरि सर्ी श्रनमकों के उपयोग के नलए, नजसमें उि

ननमायर् प्रनिया की जािी है और जो नवश्राम के अंिराल के िौरान पररसर में रहिे हैं, एक उपयुि र्ोजन कक्ष उपलब्ध कराया जाएगा और उसका रखरखाव

नकया जाएगा, नजसमें -

(क) पयायप्त मेजें और पीठ के सहारे बैठने वाली बेंचें, और

(ख) र्ोजन गमय करने के नलए पयायप्त साधन उपलब्ध होंगे।

(2) र्ोजन कक्ष एक नजम्मेिार व्यनि के प्रर्ार में होगा और उसे साफ-सुिरा रखा जाएगा।

17. कायगसंचािन नहीं भकया जाएर्ा - नकसी र्ी कारखाने में कीटनाशकों का ननमायर् या काययसंचालन िब िक नहीं नकया जाएगा जब िक नक मुख्य

ननरीक्षक-सह-सुनवधाप्रिािा से इसकी खिरनाक प्रकृनि या अन्यिा के संबंध में प्रमार् पत्र प्राप्त न हो जाए।

18. भचभकत्सा अभधकारी द्वारा भचभकत्सा परीिण - (1) अनुच्छेि 1 में नननियष्ट प्रनियाओं में ननयोनजि प्रत्येक कमयचारी की उसके प्रिम ननयोजन के

15 निनों के र्ीिर एक नचनकत्सा अनधकारी द्वारा जाँच की जाएगी। हैलोजेनेटेड कीटनाशकों के संबंध में ऐसी जांचों में रि और वसा ऊिकों में रसायन के

ननधायरर् के नलए परीक्षर्, ई.ई.जी. असामान्यिाएँ और स्मृनि परीक्षर् शानमल होंगे। ऑगेनोफॉस्फेट यौनगकों के संबंध में, ऐसी परीक्षाओं में प्लाज्मा और

लाल रि कोनशकाओं में कोनलनेस्टरेज़ के अवनमन के नलए परीक्षर् शानमल होंगे। नकसी र्ी कमयचारी को कारखाने में उसके प्रिम ननयोजन के 15 निनों

120

DELHI GAZETTE : EXTRAORDINARY

PART IV]

के बाि काम करने की अनुमनि नहीं िी जाएगी, जब िक नक नचनकत्सा अनधकारी द्वारा उसे ऐसे ननयोजन के नलए उपयुि प्रमानर्ि न कर निया जाए।

(2) उि प्रनिया में ननयोनजि प्रत्येक कमयचारी की प्रत्येक छह कैलेंडर माह में कम से कम एक बार एक नचनकत्सा अनधकारी द्वारा पुनिः जाँच की जाएगी।

ऐसी

जांच में, जहाँ र्ी नचनकत्सा अनधकारी उनचि समझे, उप-अनुच्छेि (1) में नननियष्ट परीक्षर् शानमल होंगे। इसके अलावा, उि प्रनियाओं में ननयोनजि प्रत्येक

कमयचारी की र्ी कारखाना नचनकत्सा अनधकारी द्वारा प्रत्येक िीन माह में एक बार जाँच की जाएगी।

(3) नचनकत्सा अनधकारी, कमयचारी की जाँच के बाि, प्रपत्र-24 में एक स्वास््य प्रमार्पत्र जारी करेगा। की गई जाँच और पुन: जाँच का ररकॉडय प्रमार्पत्र

में िजय नकया जाएगा और प्रमार्पत्र कारखाने के अनधर्ोगी की अनर्रक्षा में रखा जाएगा।

उप-अनुच्छेि (1) और (2) के अंिगयि की गई प्रत्येक जाँच का ररकॉडय, नजसमें इन परीक्षर्ों की प्रकृनि और पररर्ाम शानमल हैं, नचनकत्सा अनधकारी द्वारा

प्रपत्र-05 में एक स्वास््य रनजस्टर में र्ी िजय नकया जाएगा।

(4) स्वास््य प्रमार्पत्र और स्वास््य रनजस्टर को ननरीक्षक-सह-सुनवधाकिाय द्वारा ननरीक्षर् के नलए ित्परिा से उपलब्ध रखा जाएगा।

(5) यनि नकसी र्ी समय नचनकत्सा अनधकारी की यह राय हो नक कोई कमयचारी उि प्रनियाओं में इस आधार पर रोजगार के नलए उपयुि नहीं है नक इसमें

बने रहने से कमयचारी के स्वास््य को नवशेर् खिरा होगा, िो वह अपने ननष्ट्कर्ों को उि प्रमार्पत्र और स्वास््य रनजस्टर में िजय करेगा। इन िस्िावेजों में

उसके ननष्ट्कर्ों की प्रनवनष्ट में वह अवनध र्ी शानमल होनी चानहए नजसके नलए वह समझिा है नक उि व्यनि उि प्रनिया में काम करने के नलए अयोग्य है।

उसे वैकनल्पक ननयुनि की सुनवधा प्रिान की जाएगी, जब िक नक वह नचनकत्सा अनधकारी की राय में पूरी िरह से अक्षम न हो, ऐसी नस्िनि में प्रर्ानवि

व्यनि का उपयुि रूप से पुनवायस नकया जाएगा।

(6) कोई र्ी व्यनि जो उप-अनुच्छेि (5) में बिाए अनुसार काम करने के नलए अयोग्य पाया गया है, उसे उि प्रनियाओं में िब िक पुनिः ननयोनजि या

काम करने की अनुमनि नहीं िी जाएगी जब िक नक नचनकत्सा अनधकारी, आगे की जांच के बाि, उसे पुनिः उन प्रनियाओं में रोजगार के नलए योग्य प्रमानर्ि

न कर िे।

20. छूट - यनि नकसी कारखाने के संबंध में मुख्य ननरीक्षक-सह-सुनवधाप्रिािा इस बाि से संिुष्ट है नक असाधारर् पररनस्िनियों या उि नवननमायर् प्रनिया

की अननयनमििा या नकसी अन्य कारर् से, जो नलनखि रूप में िजय हो, इस अनुसूची के सर्ी या कोई र्ी प्रावधान कारखाने में काययरि श्रनमकों की सुरक्षा

के नलए आवश्यक नहीं हैं, िो वह नलनखि प्रमार् पत्र द्वारा ऐसे कारखाने को, सर्ी या नकसी र्ी प्रावधान से, ऐसी शिय पर छूट िे सकिा है, जैसा नक वह

उसमें नननियष्ट करे।

......................

पररभशष्ट

चेतािनी सूचना

(जीिाणुनाशक और कीटनाशक)

1. इस संयंत्र में प्रयुि रसायन नवर्ैले पिािय हैं।

2. इस क्षेत्र में धूम्रपान, खाना-पीना, िंबाकू चबाना प्रनिबंनधि है। इस क्षेत्र में कोई र्ी खाद्य सामग्री या पेय पिािय नहीं लाया जाएगा।

3. इनमें से कुछ रसायन त्वचा के माध्यम से अवशोनर्ि हो सकिे हैं और नवर्ाििा का कारर् बन सकिे हैं।

4. र्ोजन से पहले अच्छी िरह नहाना चानहए।

5. इस पारी के अंि में अच्छी िरह स्नान करना चानहए।

6. इस क्षेत्र में काम करिे समय सुरक्षात्मक कपडे और उपकरर् पहने जाने चानहए।

7. कीटनाशकों के कंटेनरों का उपयोग खाद्य सामग्री रखने के नलए नहीं नकया जाना चानहए।

8. शरीर के नकसी र्ी र्ाग या फशय या काययक्षेत्र पर रसायनों के नगरने पर िुरंि पानी से धोना चानहए।

9. छींटे पडने से िूनर्ि कपडों को िुरंि हटा िेना चानहए।

10. इस क्षेत्र में पूरी सफाई रखी जानी चानहए।

[PART IV

DELHI GAZETTE : EXTRAORDINARY

121

11. कीटनाशकों को नंगे हािों से न छुएँ, हैंडल वाले स्कूप का इस्िेमाल करें।

12. मिली, उल्टी, चक्ट्कर जैसी बीमारी की नस्िनि में, प्रबंधक को सूनचि करें जो उपचार की आवश्यक व्यवस्िा करेगा।

13. सर्ी कमयचारी अपने स्वास््य की सुरक्षा के नलए ननयनमि रूप से ननधायररि नचनकत्सा जाँच के नलए उपनस्िि होंगे।

.......................

अनुसूची – XXV

नवस्कोस प्रनिया द्वारा रेयान का ननमायर्

1. पररिाषाएँ – इस अनुसूची के प्रयोजन के नलए –

(क) “अनुमोनिि” का अिय है मुख्य ननरीक्षक-सह-सुनवधाकिाय द्वारा नलनखि रूप में ित्काल अनुमोनिि;

(ख) “श्वास उपकरर्” का अिय है आवश्यक कनेक्ट्शनों वाला एक हेलमेट या फेसपीस या कोई अन्य अनुमोनिि उपकरर्; नजसके माध्यम से नकसी नवर्ैले,

िम घोंटने वाले या उत्तेजक वािावरर् में इसका उपयोग करने वाला व्यनि अप्रिूनर्ि हवा में साँस लेिा है;

(ग) “मंिन” का अिय है वह पात्र नजसमें क्षारीय सेल्यूलोज पल्प को काबयन डाइसल्फाइड से उपचाररि नकया जािा है;

(घ) “डंनपंग” का अिय है शुष्ट्क मंिन से सेल्यूलोज ज़ैंिेट का नवलायक में स्िानांिरर्;

(ङ) "कुशल एग्‍जॉस्‍ट ड्रा्ट" का अिय है यांनत्रक साधनों द्वारा स्िानीयकृि वेंनटलेशन नकसी र्ी गैस या वाष्ट्प को हटाने के नलए, िानक उसे नकसी र्ी ऐसे

स्िान की हवा में फैलने से रोका जा सके जहाँ कायय नकया जा रहा हो। कोई र्ी ड्रा्ट कुशल नहीं माना जाएगा यनि वह उस नबंिु पर उत्पन्न नकसी र्ी गैस

या वाष्ट्प को प्रर्ावी ढंग से ननयंनत्रि करने में नवफल रहिा है जहाँ से ऐसी गैस या धुआँ उत्पन्न होिा है;

(च) "धुआँ प्रनिया" का अिय है कोई र्ी प्रनिया नजसमें काबयन डाइसल्फाइड या

हाइड्रोजनसल्फाइड का उत्पािन, उपयोग या उत्सजयन नकया जािा है;

(छ) "जीवन बेल्ट" का अिय है चमडे या अन्य उपयुि सामग्री से बनी एक बेल्ट नजसे शरीर के चारों ओर एक उपयुि लंबाई की रस्सी से सुरनक्षि रूप से

बाँधा जा सकिा है, नजसमें से प्रत्येक रस्सी एक व्यनि के वजन को सहन करने के नलए पयायप्त रूप से मजबूि हो;

(ज) "सुरक्षात्मक उपकरर्" का अिय है उपयुि सामग्री से बने एप्रन, चश्मे, चेहरे की ढाल, जूिे,

िस्िाने और चौगा।

2. िेंभटिेशन -

(1) सर्ी कायय कक्षों में जहाँ धुआँ प्रनिया की जािी है, प्राकृनिक या यांनत्रक साधनों द्वारा पयायप्त वेंनटलेशन प्रिान नकया जाएगा िानक अन्य ननयंत्रर् उपायों

के साि, प्रत्येक कायय पररवेश की वायु में काबयन-डाई-सल्फाइड और हाइड्रोजन सल्फाइड की सांद्रिा को अनुमेय सीमा के र्ीिर ननयंनत्रि नकया जा सके।

(2) उप-अनुच्छेि (1) की आवश्यकिाओं के बावजूि, ननम्ननलनखि स्िानों पर वायु में काबयन-डाई-सल्फाइड और हाइड्रोजन सल्फाइड की सांद्रिा को

ननयंनत्रि करने के नलए एक कुशल एग्‍जॉस्‍ट ड्रा्ट प्रिान और अनुरनक्षि नकया जाएगा:-

(क) शुष्ट्क मंिन के डंनपंग हॉपर;

(ख) किाई मशीनें;

(ग) स्टेपल फाइबर किाई में प्रयुि रायो रोलर और कटर;

(घ) सूि केक के नलए हाइड्रो-एक्ट्सरैक्ट्टर;

(ङ) उपचार प्रनियाओं के बाि; और

122

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(च) नस्पन बाि।

(3) जहाँ िक स्टेपलफाइबर नस्पननंग में प्रयुि नस्पननंग मशीनों और नरयो रोलसय और कटर का संबंध है, उन्हें, उप-अनुच्छेि (1) में अपेनक्षि ननकास ड्रा्ट

की प्रर्ावशीलिा सुनननिि करने के उद्देश्य से, यिासंर्व पूरी िरह से बंि नकया जाएगा और अनुर्ागों में उपयुि शटर प्रिान नकए जाएँगे िानक आवश्यक

संचालन कायय, वािावरर् में काबयन-डाइ-डल्फाइड की अनुनचि मात्रा को उत्पन्न नकए नबना नकए जा सकें।

(4) अनर्निया पूरी होने के बाि, काबयन-डाइ-सल्फाइड के अवनशष्ट वाष्ट्पों को आरंर् में ननकालने के नलए उपयुि और कुशल व्यवस्िा के संचालन के

नबना, शुष्ट्क मंिन को नहीं खोला जाएगा।

वाष्ट्पों को ननकालने के नलए उपयुि और कुशल व्यवस्िा का संचालन िब िक जारी रखा जाएगा जब िक मंिन खुला रहिा है।

(5) जब र्ी उप-अनुच्छेि (2), (3) और (4) में उनल्लनखि आवश्यकिाओं को पूरा करने के नलए सामान्यििः आवश्यक कोई र्ी वेंनटलेशन उपकरर्

अप्रर्ावी हो, नवफल हो जाए, या नकसी र्ी उद्देश्य के नलए बंि कर निया जाए, िो सर्ी व्यनियों को उन कायय क्षेत्रों को यिाशीघ्र छोडना होगा जहाँ उपयुयि

उप-अनुच्छेिों में नननियष्ट उपकरर् या प्रनियाएँ उपयोग में हैं, और नकसी र्ी नस्िनि में ऐसी घटना के 15 नमनट के बाि नहीं।

(6) (क) उप-अनुच्छेि (2), (3) और (4) में उनल्लनखि उद्देश्यों के नलए प्रिान की गई सर्ी वेंनटलेशन प्रर्ानलयों की प्रत्येक सप्ताह एक बार एक

नजम्मेिार व्यनि द्वारा जाँच और ननरीक्षर् नकया जाएगा। 12 महीनों की प्रत्येक अवनध में एक बार नकसी सक्षम व्यनि द्वारा इसकी पूरी िरह से जाँच और

परीक्षर् नकया जाएगा। ऐसी जाँच या परीक्षर् में पाए गए नकसी र्ी िोर् को िुरंि ठीक नकया जाएगा।

(ख) ऐसी जाँचों और परीक्षर्ों का नववरर्, और प्रर्ानलयों की नस्िनि और आवश्यक पाई गई मरम्मि या पररवियन (यनि कोई हो) वाला एक रनजस्टर रखा

जाएगा और ननरीक्षक-सह-सुनवधाकिाय द्वारा ननरीक्षर् के नलए उपलब्ध होगा।

3. किाई मशीनों से अपनशष्ट - किाई मशीनों से अपनशष्ट सूि को उपयुि कंटेनरों में जमा नकया जाएगा, नजन पर कसकर ढक्ट्कन लगे होंगे। ऐसे अपनशष्ट

का ननपटान संिूर्र्-शोधन के बाि यिाशीघ्र नकया जाएगा।

4. शुष्क मर्थनी की परत - सर्ी शुष्ट्क मिनी की र्ीिरी सिह पर एक गैर-नचपनचपा पेंट लगाया जाएगा िानक सेल्यूलोज ज़ैंिेट मिनी की सिह पर न

नचपके। इस लेप को अच्छी नस्िनि में रखा जाएगा।

5. िायु भनर्रानी -

(1) ननयंत्रर् उपायों की प्रर्ावशीलिा सुनननिि करने के नलए, वायु में काबयन-डाइसल्फाइड और हाइड्रोजन सल्फाइड की ननगरानी प्रत्येक पाली में कम से

कम एक बार की जाएगी और इस प्रकार प्राप्त पररर्ामों का ररकॉडय इस प्रयोजन के नलए नवशेर् रूप से बनाए गए रनजस्टर में िजय नकया जाएगा।

(2) उप-अनुच्छेि (1) की आवश्यकिा के प्रयोजन के नलए, िात्कानलक गैस संसूचक ननलयों का उपयोग नहीं नकया जाएगा। नमूने कम से कम 10 नमनट

की अवनध में एकत्र नकए जाएँगे और एक अनुमोनिि नवनध द्वारा नवश्लेर्र् नकए जाएँगे। नजन स्िानों पर ऐसी ननगरानी की जानी है, वे ननरीक्षक-सह-सुनवधाकिाय

के ननिेशानुसार होंगे।

(3) यनि काबयन डाइसल्फाइड या हाइड्रोजन सल्फाइड की सांद्रिा, ननयमों में ननधायररि वाष्ट्प या गैस के नलए अनुमेय सीमा से अनधक हो, िो ऐसे संिूर्कों

की वायु में सांद्रिा को ननयंनत्रि करने के नलए उपयुि किम उठाए जाएँगे। ऐसी घटनाओं की ररपोटय िुरंि मुख्य ननरीक्षक-सह-सुनवधाप्रिािा को र्ेजी जाएगी।

6. धूम्र प्रभिया कि में रहने का भनषेध - कोई र्ी व्यनि र्ोजन या नवश्राम के िौरान ऐसे नकसी र्ी कमरे में नहीं रहेगा जहाँ धूम्र प्रनिया चल रही हो।

7. भकशोरों के भनयोजन से संबंभधत भनषेध - नकसी र्ी नकशोर को नकसी र्ी धूम्र प्रनिया में या ऐसे नकसी र्ी कमरे में ननयोनजि या काम करने की

अनुमनि नहीं िी जाएगी नजसमें ऐसी कोई प्रनिया चल रही हो।

8. सुरिात्मक उपकरण - (1) अनधर्ोगी, सारर्ी में नननियष्ट सुरक्षात्मक उपकरर् उपलब्ध कराएगा और उन्हें अच्छी नस्िनि में बनाए रखेगा, जैसा नक

[PART IV

DELHI GAZETTE : EXTRAORDINARY

123

उसमें नननियष्ट प्रनियाओं में ननयोनजि व्यनियों के उपयोग के नलए है।

ताभिका

प्रक्रिया का नाम

सुरक्षात्मक उपकरण का नाम

1

डनम्पंग

ओवरऑल, फेस-शील्ड, िस्िाने और जूिे। सर्ी उपयुि सामग्री से बने

2

किाई

उपयुि एप्रन, िस्िाने और जूिे

3

नवस्कोस नवलयन के संपकय में आने वाली या संपकय में आने की

संर्ावना वाली प्रनिया

उपयुि िस्िाने और जूिे

4

सल्फर का संचालन

उपयुि रासायननक चश्मे

5

खिरनाक रसायनों के संपकय में आने वाली कोई अन्य प्रनिया

मुख्य ननरीक्षक-सह-सुनवधाकिाय द्वारा नलनखि आिेश द्वारा ननिेनशि

सुरक्षात्मक उपकरर्

(2) श्रनमकों को प्रिान नकए जाने वाले सर्ी सुरक्षात्मक उपकरर्ों के र्ंडारर् के नलए नवशेर् रूप से एक उपयुि कमरा, कमरे या लॉकर उपलब्ध कराए

जाएंगे और ऐसे नकसी र्ी उपकरर् को इस प्रकार उपलब्ध कराए गए कमरे, कमरों या लॉकर के अलावा नकसी अन्य स्िान पर संग्रहीि नहीं नकया जाएगा।

9. श्वास उपकरण - (1) प्रत्येक कारखाने में, जहाँ धुआँ प्रनिया की जािी है, ननम्‍नांनकि की पयायप्त आपूनिय उपलब्ध कराई जाएगी -

(क) श्वास उपकरर्,

(ख) ऑक्ट्सीजन और उसके प्रबंधन के नलए उपयुि उपकरर्, और

(ग) जीवन रक्षक बेल्ट।

(2) (क) उप-अनुच्छेि (1) में उनल्लनखि श्वास उपकरर् और अन्य उपकरर्ों को अच्छी नस्िनि में रखा जाएगा और उपयुि स्िानों पर रखा जाएगा िानक

वे आसानी से उपलब्ध हों।

(ख) उप-अनुच्छेि (1) के खंड (क) और (ख) में उनल्लनखि श्वास उपकरर् और अन्य उपकरर्ों को उनचि अंिराल पर साफ और कीटार्ुरनहि नकया

जाएगा और एक नजम्मेिार व्यनि द्वारा हर महीने एक बार पूरी िरह से ननरीक्षर् नकया जाएगा।

(ग) उप-खंड (1) में नननियष्ट श्वास उपकरर् और अन्य उपकरर्ों की नस्िनि के रखरखाव का अनर्लेख उस प्रयोजन के नलए उपलब्ध कराए गए रनजस्टर में

िजय नकया जाएगा जो ननरीक्षक-सह-सुनवधाकिाय द्वारा ननरीक्षर् के नलए आसानी से उपलब्ध होगा।

(3) पयायप्त संख्या में श्रनमकों को श्वास उपकरर्ों के उपयोग और कृनत्रम श्वसन िेने में प्रनशनक्षि और समय-समय पर पुनिः प्रनशनक्षि नकया जाएगा िानक कम

से कम 2 ऐसे प्रनशनक्षि व्यनि प्रत्येक कमरे में, जहाँ धुआँ प्रनिया की जािी है, पूरे कायय समय के िौरान उपलब्ध रहें।

(4) श्वास उपकरर्ों को साफ, सूखे, प्रकाशरोधी अलमाररयों में उनचि रूप से लेबल करके रखा जाएगा और यनि वे धुएँ से प्रर्ानवि होने की संर्ावना रखिे

हैं, िो उन्हें उपयुि कंटेनरों में रखकर सुरनक्षि रखा जाएगा।

(5) नकसी र्ी व्यनि को ऐसा कोई कायय करने के नलए ननयोनजि नहीं नकया जाएगा नजसके नलए उप-अनुच्छेि (1) के अंिगयि श्वास उपकरर् प्रिान करना

आवश्यक है, जब िक नक उसे उस उपकरर् के उनचि उपयोग के बारे में पूरी िरह से ननिेश न निया गया हो।

(6) उप-अनुच्छेि (1) के अनुसरर् में प्रिान नकया गया कोई र्ी श्वास उपकरर् जो नकसी व्यनि द्वारा पहना गया हो, नकसी अन्य व्यनि द्वारा िब िक नहीं

पहना जाएगा जब िक नक उसे अंनिम बार पहने जाने के बाि पूरी िरह से साफ और कीटार्ुरनहि न नकया गया हो और उस व्यनि को उस उपकरर् के

उनचि उपयोग के बारे में पूरी िरह से ननिेश न निए गए हों।

124

DELHI GAZETTE : EXTRAORDINARY

PART IV]

10. भिद्युत भफभटंर् - किाई कक्ष के अलावा, नकसी र्ी कमरे में, जहाँ काबयन डाइऑक्ट्साइड सल्फाइड उत्पन्न होिा है, उपयोग नकया जािा है या छोडा

जािा है या कायय वािावरर् में छोडे जाने की संर्ावना है, सर्ी नवद्युि नफनटंग ज्वालारोधी ननमायर् की होंगी और सर्ी नवद्युि चालक या िो धािु की ननलयों

में बंि होंगे या सीसे के आवरर् में होंगे।

11. धूम्रपान आभि से संबंभधत भनषेध - कोई र्ी व्यनि धूम्रपान नहीं करेगा या मानचस, आग या खुली रोशनी या खुली रोशनी या नचंगारी उत्पन्न करने

के अन्य साधन ऐसे कमरे में नहीं ले जाएगा जहाँ धुआँ प्रनिया की जािी है। अनधकांश श्रनमकों द्वारा समझी जाने वाली र्ार्ा में एक सूचना संयंत्र के प्रमुख

स्िानों पर लगाई जाएगी, नजसमें धूम्रपान और मानचस, आग या खुली रोशनी या नचंगारी उत्पन्न करने वाले अन्य साधनों को ऐसे कमरों में ले जाने पर

प्रनिबंध लगाया जाएगा।

परन्‍िु, यह उपबंनधि है नक आग, खुली रोशनी या नचंगारी उत्पन्न करने वाले अन्य साधनों का उपयोग ऐसे कमरे में केवल िर्ी नकया जा सकिा है जब

प्रनिया के प्रयोजनों के नलए नकसी नजम्मेिार व्यनि के ननिेशन में ऐसा आवश्यक हो।

12. धुिाई और स्नान की सुभिधाएँ - (1) सर्ी ननयोनजि श्रनमकों के उपयोग के नलए और अनुसूची द्वारा कवर की गई प्रनियाओं में, पयायप्त धुलाई

और स्नान के स्िान उपलब्ध कराए जाएँगे और उनका रखरखाव स्वच्छ और अच्छी नस्िनि में नकया जाएगा, नजनमें प्रत्येक 25 ननयोनजि व्यनियों के नलए

एक स्िान की िर से, छि के नीचे पानी की ननरंिर आपूनिय हो।

(2) धुलाई के स्िानों में कम से कम एक मीटर के अंिराल पर स्टैंडपाइप लगाए जाएँगे।

(3) धुलाई के स्िानों की कुल संख्या के कम से कम आधे स्िानों में स्नानघर उपलब्ध कराए जाएँगे।

(4) उपयुि सामग्री से बने साफ िौनलये की पयायप्त आपूनिय की जाएगी।

परन्‍िु यह उपबंनधि है नक ननरीक्षक-सह-सुनवधाकिाय द्वारा आिेश निए जाने पर प्रत्येक श्रनमक के नलए ऐसे िौनलये अलग-अलग उपलब्ध कराए जाएँगे।

(5) साबुन और नेल ब्रश की पयायप्त आपूनिय की जाएगी।

13. भििाम कि –

(1) नफलामेंट यानय नस्पननंग प्रनिया के डनफंग कायों में लगे श्रनमकों के नलए एक नवश्राम कक्ष उपलब्ध कराया जाएगा।

(2) ऐसे नवश्राम कक्ष में िाज़ी हवा की आपूनिय और पयायप्त बैठने की व्यवस्िा होगी।

14. चेतािनी सूचना और भनिेश - (1) प्रत्येक धुआँ प्रनिया कक्ष में ननम्ननलनखि चेिावनी सूचना प्रमुखिा से प्रिनशयि की जाएगी।

चेतािनी सूचना

I. काबयन डाइसल्फाइड (CS2) और हाइड्रोजन सल्फाइड (H2S) जो इस कमरे में मौजूि हो सकिे हैं, स्वास््य के नलए खिरनाक हैं।

II. सुरक्षा ननिेशों का पालन करें।

III. आवश्यकिानुसार सुरक्षात्मक उपकरर् और श्वास िंत्र का उपयोग करें।

IV. इस क्षेत्र में धूम्रपान सख्ि वनजयि है।

यह सूचना ऐसी र्ार्ा में होनी चानहए नजसे अनधकांश कमयचारी समझ सकें और इसे ऐसी जगह प्रिनशयि नकया जाना चानहए जहाँ इसे आसानी से और

सुनवधाजनक रूप से पढा जा सके। यनि कोई कमयचारी ननरक्षर है, िो उसे प्रिनशयि सूचना की नवर्य-वस्िु को सावधानीपूवयक समझाने के नलए प्रर्ावी किम

उठाए जाएँगे।

[PART IV

DELHI GAZETTE : EXTRAORDINARY

125

(2) नकसी र्ी कमरे में काययरि प्रत्येक कमयचारी को, जहाँ धुआँ प्रनिया की जािी है, उनके काम से जुडे स्वास््य संबंधी खिरों और स्वयं की सुरक्षा के

नलए ननवारक उपायों और नवनधयों के बारे में ननिेश िेने की व्यवस्िा की जाएगी। ऐसे ननिेश उसे पहली बार काम पर रखने पर निए जाएँगे और समय-समय

पर िोहराए जाएँगे।

(3) यह सुनननिि करने के नलए सरल और नवशेर् ननिेश िैयार नकए जाएँगे नक काबयन डाइऑक्ट्साइड और हाइड्रोजन सल्फाइड के ररसाव से संबंनधि आपाि

नस्िनि में प्रर्ावी उपाय नकए जाएँगे। ये ननिेश संबंनधि क्षेत्रों में प्रिनशयि नकए जाएँगे और श्रनमकों को ऐसी आपाि नस्िनियों में की जाने वाली कारयवाइयों के

बारे में ननिेश और प्रनशक्षर् निया जाएगा।

15. भचभकत्सा अभधकारी द्वारा भचभकत्सा परीिण - (1) अनुच्छेि 1 में नननियष्ट प्रनियाओं में ननयोनजि प्रत्येक श्रनमक की उसके प्रिम ननयोजन के 15

निनों के र्ीिर एक नचनकत्सा अनधकारी द्वारा जाँच की जाएगी। ऐसी जांचों में डमेटाइनटस के नलए त्वचा परीक्षर् शानमल होगा और नकसी र्ी श्रनमक को

कारखाने में उसके प्रिम ननयोजन के 15 निनों के बाि काम करने की अनुमनि नहीं िी जाएगी जब िक नक नचनकत्सा अनधकारी द्वारा उसे ऐसे ननयोजन के

नलए उपयुि प्रमानर्ि न कर निया जाए।

(2) मैंगनीज प्रनिया में ननयोनजि प्रत्येक श्रनमक की प्रत्येक िीन कैलेंडर माह में कम से कम एक बार एक नचनकत्सा अनधकारी द्वारा पुनिः जाँच की जाएगी

और ऐसी परीक्षा में, जहाँ र्ी नचनकत्सा अनधकारी उनचि समझे, उप-अनुच्छेि (1) के सर्ी परीक्षर् शानमल होंगे।

(3) नचनकत्सा अनधकारी, नकसी कमयचारी की जाँच करने के बाि, प्रपत्र-24 में स्वास््य प्रमार्पत्र जारी करेगा। की गई जाँच और पुन: जाँच का ररकॉडय

प्रमार्पत्र में िजय नकया जाएगा और प्रमार्पत्र कारखाने के अनधर्ोगी की अनर्रक्षा में रखा जाएगा। उप-अनुच्छेि (1) और (2) के अंिगयि की गई प्रत्येक

जाँच का ररकॉडय, नजसमें इन परीक्षर्ों की प्रकृनि और पररर्ाम शानमल हैं, नचनकत्सा अनधकारी द्वारा प्रपत्र-05 में एक स्वास््य रनजस्टर में र्ी िजय नकया

जाएगा।

(4) स्वास््य प्रमार्पत्र और स्वास््य रनजस्टर को ननरीक्षक-सह-सुनवधाकिाय द्वारा ननरीक्षर् के नलए आसानी से उपलब्ध रखा जाएगा।

(5) यनि नकसी र्ी समय नचनकत्सा अनधकारी की यह राय हो नक कोई कमयचारी उि प्रनियाओं में इस आधार पर ननयोजन के नलए अब उपयुि नहीं है

नक इसमें लगे रहने से कमयचारी के स्वास््य को नवशेर् खिरा होगा, िो वह अपने ननष्ट्कर्ों को उि प्रमार्पत्र और स्वास््य रनजस्टर में िजय करेगा। उन

िस्िावेज़ों में उसके ननष्ट्कर्ों की प्रनवनष्ट में वह अवनध र्ी शानमल होनी चानहए नजसके नलए वह समझिा है नक उि व्यनि उि प्रनिया में काम करने के

नलए अयोग्य है। उसे वैकनल्पक ननयुनि सुनवधाएँ प्रिान की जाएँगी, जब िक नक वह नचनकत्सा अनधकारी की राय में पूरी िरह से अक्षम न हो। ऐसी नस्िनि

में प्रर्ानवि व्यनि का उपयुि पुनवायस नकया जाएगा।

(6) कोई र्ी व्यनि जो उप-अनुच्छेि (5) में बिाए अनुसार काम करने के नलए अयोग्य पाया गया हो, उसे उि प्रनियाओं में िब िक पुनिः ननयोनजि या

काम करने की अनुमनि नहीं िी जाएगी, जब िक नक नचनकत्सा अनधकारी, आगे की जाँच के बाि, उसे उन प्रनियाओं में रोजगार के नलए पुनिः प्रमानर्ि न

कर िे।

17. छूट - यनि नकसी कारखाने के संबंध में, मुख्य ननरीक्षक-सह-सुनवधाप्रिािा इस बाि से संिुष्ट है नक असाधारर् पररनस्िनियों या प्रनियाओं की आवृनत्त

में कमी या नकसी अन्य कारर् से, इस अनुसूची के सर्ी या कोई र्ी प्रावधान कारखाने में श्रनमकों की सुरक्षा के नलए आवश्यक नहीं हैं, िो मुख्य ननरीक्षक-

सह-सुनवधाप्रिािा एक नलनखि प्रमार् पत्र जारी कर सकिा है, नजसे वह अपने नववेकानुसार नकसी र्ी समय रद्द कर सकिा है, और ऐसे कारखाने को ऐसे

सर्ी या नकसी र्ी प्रावधान से छूट िे सकिा है, बशिे नक वह उसमें नननियष्ट शिों, यनि कोई हों, के अधीन हो।

........................

126

DELHI GAZETTE : EXTRAORDINARY

PART IV]

अनुसूची – XXVI

अत्यभधक ज्ििनशीि द्रि और ज्ििनशीि

संपीभडत र्ैसें

1. अनुप्रयोर् – ये ननयम उन सर्ी कारखानों पर लागू होंगे जहाँ अत्यनधक ज्वलनशील द्रव या ज्वलनशील संपीनडि गैसें नननमयि, संग्रनहि, संचानलि या

उपयोग की जािी हैं।

2. पररिाषा – इस अनुसूची के प्रयोजन के नलए –

(क) “अत्यनधक ज्वलनशील द्रव” का अिय है कोई र्ी द्रव, नजसमें उसका नवलयन, पायस या ननलंबन शानमल है, नजसका पेरोनलयम अनधननयम, 1934

(1934 का 30) की धारा 14 और 15 द्वारा नननियष्ट िरीके से परीक्षर् करने पर 32 नडग्री सेंटीग्रेड से कम िापमान पर ज्वलनशील वाष्ट्प ननकलिा है;

(ख) "ज्वलनशील संपीनडि गैस" का अिय नवस्फोटक अनधननयम, 1884 के अंिगयि बनाए गए स्िैनिक एवं गनिशील िाब पात्र (अज्वलनशील) ननयम

1981 की धारा 2 में पररर्ानर्ि ज्वलनशील संपीनडि गैस है।

3. िंडारण –

(1) प्रत्येक कारखाने में उपयोग नकए जाने वाले प्रत्येक ज्वलनशील द्रव या ज्वलनशील संपीनडि गैस को उपयुि नस्िर र्ंडारर् टैंक में, या उपयुि बंि पात्र

में, जो ज़मीन के नीचे, खुले में या पयायप्त अनग्नरोधी ननमायर् वाले र्ंडारर् कक्ष में सुरनक्षि स्िान पर नस्िि हो, संग्रनहि नकया जाएगा।

(2) उपयोग, संचालन या रखरखाव के नलए आवश्यक होने के अलावा, प्रत्येक पात्र या टैंक नजसमें अत्यनधक ज्वलनशील द्रव या ज्वलनशील संपीनडि

गैस हो या िी, उसे हमेशा बंि रखा जाएगा और नकसी र्ी संर्ानवि ररसाव या ररसाव को रोकने या िुरंि नकसी उपयुि कंटेनर में ननकालने के नलए सर्ी

यिोनचि व्यावहाररक किम उठाए जाएंगे।

(3) अत्यनधक ज्वलनशील द्रव या ज्वलनशील संपीनडि गैस के र्ंडारर् के नलए उपयोग नकए जाने वाले प्रत्येक कंटेनर, बियन, टैंक, नसलेंडर या र्ंडारर्

कक्ष पर स्पष्ट रूप से और मोटे अक्षरों में "खिरा-अत्यनधक ज्वलनशील द्रव" या "खिरा-ज्वलनशील संपीनडि गैस" अंनकि होना चानहए।

4. अत्यभधक ज्ििनशीि द्रिों के पररिहन के भिए संिग्न प्रणाभियाँ -

जहाँ र्ी यिोनचि रूप से व्यावहाररक हो, अत्यनधक ज्वलनशील द्रवों को कारखाने के र्ीिर र्ंडारर् टैंक या बियन से उपयोग के स्िान िक पाइप लाइनों,

पंपों और इसी िरह के उपकरर्ों से युि पूरी िरह से संलग्न प्रर्ानलयों में पहुँचाया जाएगा। ऐसी संलग्न प्रर्ानलयों को इस प्रकार नडज़ाइन, स्िानपि, संचानलि

और रखरखाव नकया जाएगा िानक ररसाव या बहाव के जोनखम से बचा जा सके।

5. िायु के सार्थ ज्ििनशीि भमिण के भनमागण को रोकना –

जहाँ कहीं र्ी नकसी उपकरर्, पाइप लाइन, वाल्व, जोड या प्रर्ाली के अन्य र्ाग से अत्यनधक ज्वलनशील द्रव या ज्वलनशील संपीनडि गैस के ररसाव या

फैलाव की संर्ावना हो, वहाँ ऐसे फैलाव या ररसाव को रोकने, ननकालने या पिला करने के नलए सर्ी व्यावहाररक उपाय नकए जाएँगे िानक वायु के साि

ज्वलनशील नमश्रर् के ननमायर् को रोका जा सके।

6. प्रज्ििन की रोकर्थाम –

(1) प्रत्येक कमरे, काययस्िल या अन्य स्िान पर जहाँ अत्यनधक ज्वलनशील द्रव या ज्वलनशील िहनशील गैस संग्रहीि, पररवहन, संचालन या उपयोग की

जािी है या जहाँ हवा में अत्यनधक ज्वलनशील द्रव या ज्वलनशील संपीनडि गैस के संचय से आग या नवस्फोट का खिरा हो, वहाँ प्रज्वलन के स्रोिों को

बाहर करने के नलए सर्ी व्यावहाररक उपाय नकए जाएँगे।

[PART IV

DELHI GAZETTE : EXTRAORDINARY

127

ऐसी सावधाननयों में ननम्ननलनखि शानमल होंगे:

(क) सर्ी नवद्युि उपकरर् या िो जोनखम क्षेत्र से बाहर रखे जाएँगे या वे ऐसी संरचना के होंगे और इस प्रकार स्िानपि और अनुरनक्षि होंगे नक उनके प्रज्वलन

का स्रोि बनने के खिरे को रोका जा सके;

(ख) स्िैनिक आवेशों के खिरनाक स्िर िक संचयन को रोकने के नलए प्रर्ावी उपाय अपनाए जाएँगे;

(ग) कोई र्ी व्यनि ऐसे जूिे नहीं पहनेगा या पहनने की अनुमनि नहीं िी जाएगी नजन पर लोहे या स्टील की कीलें या कोई अन्य खुला लौह पिािय लगा हो

नजससे घर्यर् से नचंगारी ननकलने की संर्ावना हो;

(घ) धूम्रपान, मानचस, लाइटर या धूम्रपान सामग्री ले जाना प्रनिबंनधि होगा;

(ङ) लोहे के फास्टनरों वाले रांसनमशन बेल्ट का उपयोग नहीं नकया जाएगा; और

(च) अन्य सर्ी संर्ानवि स्रोिों जैसे खुली लपटों, घर्यर् नचंगारी, मशीनरी या संयंत्र की अत्यनधक गमय सिहों, रासायननक या र्ौनिक-रासायननक प्रनिनिया

और नवनकरनर्ि ऊष्ट्मा से प्रज्वलन को रोकने के नलए, यिासंर्व सर्ी अन्य सावधाननयाँ बरिी जाएँगी।

7. धूम्रपान भनषेध - कोई र्ी व्यनि ऐसी नकसी र्ी जगह पर धूम्रपान नहीं करेगा जहाँ अत्यनधक ज्वलनशील द्रव या ज्वलनशील संपीनडि गैस मौजूि हो

ऐसी पररनस्िनियों में जहाँ धूम्रपान से जान को खिरा हो। अनधर्ोगी इस आवश्यकिा का अनुपालन सुनननिि करने के नलए सर्ी व्यावहाररक उपाय करेगा

नजसमें धूम्रपान ननर्ेध का संकेि िेने वाला एक मोटा नोनटस प्रिनशयि करना र्ी शानमल है, हर उस जगह पर जहाँ यह आवश्यकिा लागू होिी है।

8. अभग्नशमन - प्रत्येक कारखाने में जहाँ अत्यनधक ज्वलनशील द्रव या ज्वलनशील संपीनडि गैस का ननमायर्, र्ंडारर्, संचालन या उपयोग नकया जािा

है, आग बुझाने के उपयुि और पयायप्त साधन उपलब्ध कराए जाएँगे। ऐसे साधनों की पयायप्तिा और उपयुििा, नजसमें स्िायी और पोटेबल अनग्नशामक

प्रर्ानलयाँ, अनग्नशामक सामग्री, प्रनियाएँ और अनग्नशमन प्रनिया शानमल हैं, लागू र्ारिीय मानकों द्वारा ननधायररि मानकों और स्िरों के अनुसार होंगी, और

नकसी र्ी नस्िनि में संनहिा के िहि केंद्र सरकार द्वारा ननधायररि मानकों से कमिर नहीं होंगी।

9. छूट - यनि नकसी कारखाने के संबंध में, मुख्य ननरीक्षक-सह-सुनवधाप्रिािा इस बाि से संिुष्ट है नक असाधारर् पररनस्िनियों या प्रनियाओं की अननयनमििा

या नकसी अन्य कारर् से, इस अनुसूची के सर्ी या कोई र्ी प्रावधान कारखाने की सुरक्षा के नलए आवश्यक नहीं हैं।

..........................

अनुसूची – XXVII

ढिाई कारखानों में संचािन

1. अनुप्रयोर् - इस अनुसूची के प्रावधान उन सर्ी कारखानों के र्ागों पर लागू होंगे जहाँ ननम्ननलनखि में से कोई र्ी कायय या प्रनियाएँ की जािी हैं:

(क) लौह ढलाई या, जैसा र्ी मामला हो, रेि, िोमट, ढलाई संरचना या अन्य सामग्री के नमश्रर् से बने सांचों में ढलाई करके इस्पाि ढलाई का उत्पािन,

या शैल ढलाई द्वारा, या अपकेन्द्री ढलाई द्वारा और ऐसे उत्पािन से संबंनधि नकसी र्ी प्रनिया द्वारा;

(ख) अलौह ढलाई का उत्पािन रेि, िोमट, धािु, ढलाई संरचना या अन्य सामग्री या सामग्री के नमश्रर् से बने सांचों में ढलाई करके, या शैल ढलाई, डाई-

कानस्टंग (िबाव डाई कानस्टंग सनहि), अपकेन्द्री ढलाई या सिि ढलाई द्वारा और ऐसे उत्पािन से संबंनधि नकसी र्ी प्रनिया द्वारा; और

128

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(ग) नसनल्लयों, नबलेट, स्लैब या अन्य समान उत्पािों के उत्पािन के नलए अलौह धािु का नपघलना और ढलाई, और उसकी नस्रनपंग;

लेनकन यह ननम्ननलनखि के संबंध में लागू नहीं होगा -

(क) सीसा और नवद्युि संचायकों के प्रगलन और ननमायर् से संबंनधि कोई प्रनिया;

(ख) मुद्रर् कायय के प्रयोजनािय कोई प्रनिया; या

(ग) कोई प्रगलन प्रनिया नजसमें धािु नकसी अपचयन प्रनिया द्वारा प्राप्त की जािी है या ऐसी प्रनिया से संबंनधि कोई प्रनिया; या

(घ) नसनल्लयों के रूप में इस्पाि का उत्पािन; या

(ङ) सोल्डर के ननमायर् के िौरान कोई प्रनिया या ऐसे ननमायर् से संबंनधि कोई प्रनिया; या

(च) नसनल्लयों, नबलेट, स्लैब या अन्य समान उत्पािों के उत्पािन के नलए सीसा या नकसी सीसा-आधाररि नमश्रधािु का प्रगलन और ढलाई या उनकी

नस्रनपंग, या ऐसे प्रगलन, ढलाई या नस्रनपंग से संबंनधि कोई प्रनिया।

2. पररिाषा - इस अनुसूची के प्रयोजन के नलए –

(क) "अनुमोनिि श्वसन यंत्र" का अिय है मुख्य ननरीक्षक-सह-सुनवधाकिाय द्वारा अनुमोनिि प्रकार का श्वसन यंत्र;

(ख) "र्ट्ठी का कपोला" में उससे संबि ररसीवर शानमल है;

(ग) "ड्रेनसंग या फेटनलंग कायय" में ढलाई से नचपकी हुई रेि, कोर, रनर, राइज़र, ्लैश और अन्य अनिररि धािु को अलग करना और हटाना और यिोनचि

रूप से साफ और नचकनी सिह का ननमायर् शानमल है, लेनकन इसमें

(क) ढलाई से धािु को हटाना शानमल नहीं है, जब यह ढलाई की ड्रेनसंग या फेटनलंग के बाि मशीननंग या संयोजन के संबंध में आकनस्मक रूप से नकया

जािा है, या

(ख) कोई र्ी कायय जो इस अनुसूची के अिय में नॉक-आउट कायय है;

(घ) "फाउंड्री" का अिय है कारखाने के वे र्ाग नजनमें लोहा या इस्पाि या अलौह ढलाई (नपग आयरन का उत्पािन या नसनल्लयों के रूप में इस्पाि का

उत्पािन नहीं) का उत्पािन रेि, िोमट नमट्टी, ढलाई संरचना या अन्य सामग्री के नमश्रर् से बने सांचों में ढलाई द्वारा, या शैल ढलाई द्वारा या रेि से आच्छानिि

धािु के सांचों में अपकेंद्री ढलाई द्वारा, या िाब डाई सनहि डाई कानस्टंग द्वारा, कारखाने के नकसी र्ी र्ाग के साि, नजसमें ननम्ननलनखि में से कोई र्ी

प्रनियाएँ ऐसे उत्पािन के संबंध में और उसके िौरान आकनस्मक प्रनियाओं के रूप में की जािी हैं, अिायि्, सांचों और कोर की िैयारी और नॉक आउट

संचालन और ड्रेनसंग या फेटनलंग संचालन;

(ङ) "नॉक-आउट संचालन" का अिय है सांचों से ढलाई हटाने की सर्ी नवनधयाँ और ननम्ननलनखि संचालन, जब इसके संबंध में नकए जािे हैं, अिायि्,

नस्रनपंग, कोर-आउट और रनर और राइजर को हटाना;

(च) "डालने का गनलयारा" का अिय है एक मुख्य गैंगवे से या सीधे एक कपोला या र्ट्टी से उस स्िान िक जाने वाला गनलयारा जहाँ धािु को सांचों में

डाला जािा है।

3. भििाजक सामग्री के रूप में कुछ सामभग्रयों के उपयोर् का भनषेध –

(1) नकसी पिािय का उपयोग नवर्ाजन सामग्री के रूप में नहीं नकया जाएगा यनि वह पिािय नजसमें शुष्ट्क पिािय के र्ार के 5 प्रनिशि से अनधक नसनलका

[PART IV

DELHI GAZETTE : EXTRAORDINARY

129

के रूप में पररकनलि नसनलकॉन यौनगक हों:

परन्‍िु यह उपबंनधि है नक यह ननर्ेध ननम्ननलनखि को नवर्ाजन सामग्री के रूप में उपयोग करने से नहीं रोकेगा यनि पिािय में नकसी अन्य नसनलका का नमश्रर्

न हो –

(क) नज़रकोननयम नसनलकेट (नज़रकोन)

(ख) कैल्सीनयुि चाइना क्ट्ले

(ग) कैल्सीनयुि एल्युनमनस फायरक्ट्ले

(घ) नसनलमेनाइट

(ङ) कैल्सीनयुि या संलनयि एल्युनमना

(च) ओनलवाइन

(छ) प्राकृनिक रेि

(2) फेटनलंग या ब्लानस्टंग प्रनिया से जमा धूल या अन्य पिािय का उपयोग नवर्ाजन सामग्री के रूप में या नवर्ाजन सामग्री के घटक के रूप में नहीं नकया

जाएगा।

4. व्यिस्र्था और िंडारण – काययस्िलों में सुरक्षा और स्वच्छिा को बढावा िेने के उद्देश्य से ननम्ननलनखि आवश्यकिाओं का पालन नकया जाएगा:-

(क) मोनल्डंग बॉक्ट्स, लोम प्लेटें, करछुल, पैटनय, पैटनय प्लेटें, फ्रेम, बोडय, बॉक्ट्स वेट और अन्य र्ारी वस्िुओं को इस प्रकार व्यवनस्िि और रखा जाएगा नक

काम अनावश्यक जोनखम के नबना नकया जा सके;

(ख) अन्य उपकरर्ों और औजारों के र्ंडारर् के नलए उपयुि और सुनवधाजनक रूप से सुलर् रैक, नडब्बे या अन्य पात्र उपलब्ध कराए जाएंगे और उनका

उपयोग नकया जाएगा;

(ग) जहाँ रेि, ईंधन, धािु स्िैप या अन्य सामग्री या अवशेर्ों का िोक र्ंडारर् हो, वहाँ ऐसे र्ंडारर् के नलए उपयुि नडब्बे, बंकर या अन्य पात्र उपलब्ध

कराए जाएँगे।

5. फशग का भनमागण -

(1) नजन आंिररक काययस्िलों में प्रनियाएँ की जािी हैं, उनके फशय, रेि के र्ागों को छोडकर, कठोर सामग्री की सिह वाले होंगे।

(2) ऐसे नकसी र्ी आंिररक काययस्िल के फशय का कोई र्ी र्ाग रेि का नहीं होगा नसवाय इसके नक वहाँ नकए गए कायय के कारर् ऐसा करना आवश्यक

हो।

(3) ऐसे नकसी र्ी आंिररक काययस्िल के फशय की सिह के सर्ी र्ाग जो रेि के हैं, जहाँ िक संर्व हो, समिल और दृढ नस्िनि में बनाए रखे जाएँगे।

6. आंतररक कायगस्र्थिों की सफाई–

(1) प्रत्येक आंिररक काययस्िल की िीवारों के सर्ी सुलर् र्ागों, जहाँ प्रनियाएँ की जािी हैं और उन िीवारों से जुडी प्रत्येक वस्िु की, प्रत्येक चौिह महीने

की अवनध में कम से कम एक बार फशय से कम से कम 4.2 मीटर की ऊँचाई िक, उपयुि नवनध से प्रर्ावी ढंग से सफाई की जाएगी। इस अनुच्छेि के

अनुसरर् में प्रत्येक ऐसी प्रर्ावी सफाई का ररकॉडय, नजसमें निनांक र्ी शानमल है (जो नपछली धुलाई, सफाई या अन्य उपचार के ठीक बाि पाँच महीने से

कम और नौ महीने से अनधक नहीं होगी) ।

(2) प्रत्येक आंिररक काययस्िल के फशय के सर्ी सुलर् र्ागों की, जहाँ प्रनियाएँ की जािी हैं, रेि वाले र्ागों को छोडकर, प्रत्येक कायय निवस में कम से

कम एक बार उपयुि नवनध से प्रर्ावी सफाई की जाएगी; और रेि वाले र्ाग अच्छी नस्िनि में रहेंगे।

130

DELHI GAZETTE : EXTRAORDINARY

PART IV]

7. भपर्िी ह ई धातु से संबंभधत मैनुअि संचािन -

(1) नपघली हुई धािु से संबंनधि मैनुअल संचालन में काययरि सर्ी व्यनियों के नलए, नजन पर छींटे पडने की आशंका है, उस संचालन के नलए एक कायय

स्िान प्रिान नकया जाएगा और उसका उनचि रखरखाव नकया जाएगा –

(क) जो कायय के सुरनक्षि ननष्ट्पािन के नलए पयायप्त हो और

(ख) जो, जहाँ िक संर्व हो, अवरोधों से मुि रखा गया हो?

(2) नपघली हुई धािु से युि नकसी कंटेनर को हाि से ले जाने से संबंनधि कोई र्ी कायय ऐसी मंनजल पर नकया जाएगा नजसके सर्ी र्ाग नकसी र्ी व्यनि

के चलने पर एक ही स्िर पर हों:

बशिे नक, जहाँ आवश्यक हो, संचालन को नबना नकसी अनुनचि जोनखम के सक्षम बनाने के नलए, इस अनुच्छेि में कुछ र्ी फशय से नर्न्न स्िर पर कायय

स्िान के कर्ी-कर्ार या असाधारर् उपयोग को नहीं रोकेगा, जो नक संचालन में लगे नकसी र्ी व्यनि के नलए फशय से सुरनक्षि पहुँच के साधन से युि स्िान

है।

8. र्ैंर्िे और डािने के र्भियारे –

(1) प्रत्येक कायय कक्ष में, नजस पर यह अनुच्छेि लागू होिा है, इस अनुसूची के ननमायर् के बाि नननमयि, पुनननयनमयि या उपयोग के नलए पररवनियि, और जहाँ

िक यिोनचि रूप से व्यावहाररक हो, प्रत्येक अन्य कायय कक्ष में, नजस पर यह अनुच्छेि लागू होिा है, पयायप्त और स्पष्ट रूप से पररर्ानर्ि मुख्य गैंगवे प्रिान

नकया जाएगा और उसका उनचि रखरखाव नकया जाएगा, जो -

(क) कठोर सामग्री की एक समिल सिह वाला होगा और नवशेर् रूप से, रेि का नहीं होगा या उस पर आवश्यकिा से अनधक रेि नहीं होगी िानक

आकनस्मक ररसाव से धािु के उडने के जोनखम से बचा जा सके;

(ख) जहाँ िक यिोनचि रूप से व्यावहाररक हो, अवरोधों से मुि रखा जाएगा;

(ग) यनि नपघली हुई धािु ले जाने के नलए उपयोग नहीं नकया जािा है, िो उसकी चौडाई कम से कम 920 नमलीमीटर होगी;

(घ) यनि नपघली हुई धािु ले जाने के नलए उपयोग नकया जािा है, िो –

(i) जहाँ रक लैडल का नवशेर् रूप से उपयोग नकया जािा है, लैडल की कुल चौडाई से कम से कम 600 नमलीमीटर चौडा होगा;

(ii) जहाँ हैंड शैंक्ट्स को िो से अनधक व्यनियों द्वारा नहीं ले जाया जािा है, वहां यह चौडाई का कम से कम 920 नमलीमीटर;

(iii) जहाँ हैंड शैंक्ट्स को िो से अनधक व्यनियों द्वारा ले जाया जािा है, वहां यह चौडाई का कम से कम1.2 मीटर; और

(iv) जहाँ हैंड शैंक्ट्स ले जाने वाले व्यनियों द्वारा िोनों निशाओं में एक साि यात्रा के नलए उपयोग नकया जािा है, वहां यह चौडाई का कम से कम 1.8

मीटर होगा।

(2) इस अनुसूची के ननमायर् के बाि नननमयि, पुनननयनमयि या उपयोग के नलए पररवनियि नकए गए कायय कक्ष में, पयायप्त और स्पष्ट रूप से पररर्ानर्ि डालने वाले

गनलयारे प्रिान नकए जाएंगे और उनका उनचि रखरखाव नकया जाएगा, जो –

(क) कठोर सामग्री की एक समिल सिह वाले होंगे और नवशेर् रूप से, रेि से ढके नहीं होंगे या उन पर आवश्यकिा से अनधक रेि नहीं होगी िानक

आकनस्मक ररसाव से धािु के उडने के जोनखम से बचा जा सके;

(ख) जहाँ िक संर्व हो, बाधाओं से मुि रखा जाएगा;

[PART IV

DELHI GAZETTE : EXTRAORDINARY

131

(ग) यनि नपघली हुई धािु को हाि की करछुल या बल्क करछुल में प्रनि करछुल िो से अनधक व्यनियों द्वारा ले जाया जािा है, िो यह कम से कम 460

नमलीमीटर चौडी होगी, लेनकन जहाँ गनलयारे के साि लगे साँचे गनलयारे के िल से 510 नमलीमीटर से अनधक ऊँचे हैं, वहाँ गनलयारा कम से कम 600

नमलीमीटर चौडा होगा;

(घ) यनि नपघली हुई धािु को हाि की करछुल या बल्क करछुल में प्रनि करछुल िो से अनधक व्यनियों द्वारा ले जाया जािा है, िो यह कम से कम 760

नमलीमीटर चौडी होगी;

(ङ) यनि नपघली हुई धािु को िेन, रॉली या रक की करछुल में ले जाया जािा है, िो यह कायय के सुरनक्षि ननष्ट्पािन के नलए पयायप्त चौडाई की होगी।

(3) उप-अनुच्छेि (1) और (2) की आवश्यकिाएँ नकसी र्ी काययकक्ष या काययकक्ष के नकसी र्ाग पर लागू नहीं होंगी, यनि उसमें नकए गए कायय की

प्रकृनि के कारर्, उस काययकक्ष का फशय या, जैसा र्ी मामला हो, काययकक्ष का वह र्ाग रेि का होना आवश्यक है।

(4) इस अनुच्छेि में, "काययकक्ष नजस पर यह अनुच्छेि लागू होिा है" का अिय है लौह या अलौह ढलाईखाने का वह र्ाग नजसमें नपघली हुई धािु का

पररवहन या उपयोग नकया जािा है, और नजस काययकक्ष पर यह अनुच्छेि लागू होिा है, उसे इस अनुच्छेि के प्रयोजनों के नलए इस अनुसूची के ननमायर् के

बाि नननमयि, पुनननयनमयि या उपयोग के नलए पररवनियि माना जाएगा यनि उसका ननमायर्, पुनननयमायर् या रूपांिरर् इस अनुसूची के ननमायर् के बाि शुरू हुआ

िा।

9. र्ुंबिों और िरट्टयों के पास कायग - कोई र्ी व्यनि गुंबि या र्ट्टी के नकसी र्ी टोंटी के नविरर् छोर से गुजरने वाली ऊध्वायधर रेखा से 4 मीटर की

िूरी के र्ीिर कोई कायय नहीं करेगा, जो नपघली हुई धािु को नविररि करने के नलए उपयोग की जाने वाली टोंटी हो, या नकसी र्ी करछुल के ननकटिम र्ाग

से गुजरने वाली ऊध्वायधर रेखा से 2.4 मीटर की िूरी के र्ीिर, जो ऐसी टोंटी के अंि में नस्िि हो, नसवाय इसके नक, नकसी र्ी नस्िनि में, जहाँ गुंबि या

र्ट्टी के उनचि उपयोग और रखरखाव के नलए यह आवश्यक हो नक कायय उस िूरी के र्ीिर नकया जाए जहाँ कायय ऐसे समय और ऐसी पररनस्िनियों में नकया

जा रहा हो नजससे कायय करने वाले व्यनि को नपघली हुई धािु से कोई खिरा न हो जो गुंबि या र्ट्टी से प्राप्त की जा रही हो या करछुल में हो, जो टोंटी के

अंि में नस्िि हो।

10. धूि और धुआँ–

(1) कायय कक्ष के अंिर करछुलों को गमय करने या सुखाने के नलए खुले कोयले, कोक या लकडी की आग का उपयोग नहीं नकया जाएगा, जब िक नक

जहाँ िक संर्व हो, धुएँ या अन्य अशुनियों को कायय कक्ष के वािावरर् में प्रवेश करने या बने रहने से रोकने के नलए पयायप्त उपाय न नकए जाएँ।

(2) साँचों को सुखाने के नलए नकसी र्ी खुले कोयले, कोक या लकडी की आग का उपयोग नहीं नकया जाएगा नसवाय उन पररनस्िनियों के नजनमें ऐसी

आग का उपयोग अपररहायय हो।

(3) साँचे के स्टोव, कोर स्टोव और एनीनलंग र्रट्टयों को इस प्रकार नडज़ाइन, नननमयि, अनुरनक्षि और संचानलि नकया जाएगा नक जहाँ िक संर्व हो, नकसी

र्ी कायय कक्ष में आिामक या हाननकारक धुएँ के प्रवेश को रोका जा सके जब िक कोई व्यनि उसमें काययरि हो।

(4) सर्ी नॉक-आउट ऑपरेशन ननम्नांनकि अनुसार नकए जाएँगे –

(क) फाउंड्री के एक अलग नहस्से में, जो उपयुि रूप से नवर्ानजि हो, एक कमरा या ऐसा नहस्सा नजसमें, जहाँ िक संर्व हो, प्रर्ावी और उपयुि स्िानीय

ननकास वेंनटलेशन और सामान्य वेंनटलेशन का उच्च मानक उपलब्ध हो; या

132

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(ख) फाउंड्री के उस क्षेत्र में जहाँ, जहाँ िक संर्व हो, प्रर्ावी और उपयुि स्िानीय ननकास वेंनटलेशन उपलब्ध हो, या जहाँ इस आवश्यकिा का अनुपालन

संर्व न हो, वहाँ सामान्य वेंनटलेशन का उच्च मानक उपलब्ध हो।

(5) सिी ड्रेभसंर् या फेभटंर् ऑपरेशन भनम्नांभकत अनुसार भकए जाएँर्े –

(क) एक अलग कमरे में या फाउंड्री के एक अलग नहस्से में, जो उपयुि रूप से नवर्ानजि हो; या

(ख) फाउंड्री के उस क्षेत्र में जो इस उद्देश्य के नलए अलग रखा गया हो; और जहाँ िक संर्व हो, प्रर्ावी और उपयुि स्िानीय ननकास वेंनटलेशन या धूल

को िबाने के अन्य समान रूप से प्रर्ावी साधनों के साि, धूल के उद्गम नबंिु के यिासंर्व ननकट संचानलि नकया जाएगा।

11. भनकास संयंत्र का रखरखाि और जाँच –

(1) धूल या धुएँ को ननकालने, िबाने या ननयंनत्रि करने के उद्देश्य से उपयोग नकए जाने वाले सर्ी वेंनटलेशन संयंत्रों का उनचि रखरखाव नकया जाएगा।

(2) धूल या धुएँ को ननकालने, िबाने या ननयंनत्रि करने के उद्देश्य से उपयोग नकए जाने वाले सर्ी वेंनटलेशन संयंत्रों की जाँच और ननरीक्षर् प्रत्येक सप्ताह

एक नजम्मेिार व्यनि द्वारा नकया जाएगा। प्रत्येक जाँच और परीक्षर् में कम से कम एक बार नकसी सक्षम व्यनि द्वारा इसकी पूरी िरह से जाँच और परीक्षर्

नकया जाएगा। इसे प्रपत्र-25 में एक रनजस्टर में िजय नकया जाएगा जो ननरीक्षक-सह-सुनवधाकिाय द्वारा ननरीक्षर् के नलए उपलब्ध होगा। ऐसी नकसी र्ी जाँच

और परीक्षर् में पाए गए नकसी र्ी िोर् की सूचना कारखाने के अनधर्ोगी को िी जाएगी।

12. सुरिात्मक उपकरण –

(1) अनधर्ोगी को श्रनमकों की सुरक्षा के नलए नननियष्ट सुरक्षात्मक उपकरर् उपलब्ध कराने होंगे और उनका रखरखाव करना होगा,

(क) ऐसे श्रनमकों के नलए उपयुि िस्िाने या अन्य सुरक्षा उपकरर् जो नकसी र्ी गमय सामग्री को संर्ालने में लगे हों नजससे हािों को जलने, झुलसने या

घाव होने की संर्ावना हो, या कच्चे लोहे, खुरिरी ढलाई या अन्य वस्िुओं को संर्ालने में लगे हों नजनसे हािों को कटने या घर्यर् से नुकसान होने की

संर्ावना हो;

(ख) ऐसे नकसी र्ी कायय को करने वाले श्रनमकों के नलए अनुमोनिि श्वासयंत्र जो धूल की सांद्रिा पैिा करिे हों नजसे मौजूिा वेंनटलेशन व्यवस्िा द्वारा जल्िी

और प्रर्ावी ढंग से िूर नहीं नकया जा सकिा हो।

(2) खंड 1(ख) के प्रयोजनों के नलए प्रिान नकया गया कोई र्ी श्वासयंत्र नकसी व्यनि द्वारा पहना गया हो,िो उसे नकसी अन्य व्यनि द्वारा नहीं पहना जाएगा

यनि उसे बाि में पूरी िरह से साफ और कीटार्ुरनहि नहीं नकया गया हो।

(3) ऐसे व्यनि जो अपने समय के नकसी र्ी र्ाग में –

(क) नकसी गुंबि या र्ट्टी के टोंटी पर काम करिे हैं या उसकी िेखर्ाल करिे हैं ऐसी पररनस्िनियों में नक वहाँ से ननकलने वाली सामग्री शरीर के संपकय में

आ सकिी है क्ट्योंनक वह सामग्री ऐसे िापमान पर होिी है नक शरीर के संपकय में आने से जलन हो सकिी है; या

(ख) नपघली हुई धािु डालने में लगे हैं या उसमें सहायिा कर रहे हैं; या

(ग) नपघली हुई धािु से युि नकसी करछुल या साँचे को हाि से उठािे हैं या शारीररक शनि से चलािे हैं; या

(घ) ऐसे िापमान पर सामग्री को बाहर ननकालने के कायों में लगे हैं नजसके शरीर के संपकय में आने से जलन हो सकिी है; उन्हें उपयुि जूिे और गैटर प्रिान

[PART IV

DELHI GAZETTE : EXTRAORDINARY

133

नकए जाएँगे जो उनके द्वारा पहने जाने पर, जहाँ िक संर्व हो, उनके पैरों और टखनों को जलने के जोनखम से बचािे हैं।

(4) जहाँ उपयुि हो, वहाँ उडने वाली सामग्री (नपघली हुई धािु के छींटे और नकसी र्ी प्रनिया के िौरान ननकलने वाली नचंगाररयों और नचप्स सनहि) से

सुरक्षा के नलए उपयुि परिे लगाए जाएँगे।

(5) अनधर्ोगी र्ंडारर् के नलए उपयुि स्िान उपलब्ध कराएगा और उसका रखरखाव करेगा और इस अनुच्छेि के अनुसार आपूनिय नकए गए सुरक्षात्मक

उपकरर्ों की सफाई और रखरखाव के नलए पयायप्त व्यवस्िा करेगा।

(6) प्रत्येक व्यनि उप-अनुच्छेि (1) और (4) के अनुसार अपनी सुरक्षा के नलए प्रिान नकए गए उपकरर्ों का पूर्य और उनचि उपयोग करेगा और नबना

नकसी िेरी के अनधर्ोगी, प्रबंधक या अन्य उपयुि व्यनि को उनमें नकसी र्ी प्रकार की खराबी या उससे कम खराबी की सूचना िेगा।

13. धुिाई और स्नान की सुभिधाएँ –

(1) ढलाईखाने में काययरि सर्ी श्रनमकों के उपयोग के नलए स्वच्छ और अच्छी मरम्मि की व्यवस्िा और रखरखाव नकया जाएगा -

(क) एक ढका हुआ धुलाई स्िान नजसमें या िो –

(i) एक अर्ेद्य सिह वाला कुंड हो नजसमें नबना प्लग वाला अपनशष्ट पाइप लगा हो, और नजसकी लंबाई इिनी हो नक नकसी र्ी समय काययरि प्रत्येक 10

ऐसे व्यनियों के नलए कम से कम 60 सेंटीमीटर जगह हो और कुंड के ऊपर नल या जेट से 60 सेंटीमीटर से अनधक अंिराल पर स्वच्छ जल की ननरंिर

आपूनिय हो या (ii) नकसी र्ी समय काययरि प्रत्येक 10 ऐसे व्यनियों के नलए कम से कम एक नल या स्टैंड पाइप हो, और स्वच्छ जल की ननरंिर आपूनिय

हो, नल या स्टैंड पाइप के बीच कम से कम 1.2 मीटर की िूरी हो; और

(ख) खंड (क) के अंिगयि उपलब्ध कराए गए धुलाई स्िानों की कुल संख्या के कम से कम आधे स्नानघर के रूप में होंगे।

(ग) उपयुि सामग्री से बने साफ िौनलये की पयायप्त आपूनिय, नजन्हें प्रनिनिन बिला जािा है

और साि ही नेल ब्रश और साबुन की पयायप्त आपूनिय।

(2) उप-अनुच्छेि (1) के प्रयोजनों के नलए प्रिान की गई सुनवधाएँ एक नज़म्मेिार व्यनि या व्यनियों के प्रर्ार में रखी जाएँगी और स्वच्छ एवं व्यवनस्िि

नस्िनि में रखी जाएँगी।

14. मिबे और भस्कभमंर् का भनपटान - नपघली हुई धािु से या र्ट्टी से ननकाले गए मलबे और नस्कनमंग को िुरंि उपयुि पात्रों में रखा जाएगा।

15. अपभशष्ट का भनपटान - कानस्टंग के नॉक-आउट होने के बाि, शैल मोनल्डंग से ननकलने वाले सर्ी अपनशष्ट उत्पािों (अपनशष्ट जली हुई रेि सनहि)

के ननपटान के नलए यिाशीघ्र उनचि उपाय नकए जाएँगे।

16. बाहर छोडी र्ई सामग्री और उपकरण - बाहर छोडी गई सर्ी सामग्री और उपकरर् (नजसमें अस्िायी रूप से या कर्ी-कर्ार छोडी गई सामग्री

और उपकरर् शानमल हैं) को इस िरह व्यवनस्िि और रखा जाएगा नक अनावश्यक जोनखम से बचा जा सके। ऐसी सर्ी सामग्री और उपकरर्ों िक पहुँच

के सुरनक्षि साधन होंगे और जहाँ िक संर्व हो, ऐसी पहुँच सडकों या रास्िों से होगी नजनका उनचि रखरखाव नकया जाएगा। ऐसी सडकों या रास्िों की सिह

समिल और ठोस होगी और जहाँ िक संर्व हो, उन्हें नकसी र्ी बाधा से मुि रखा जाएगा।

17. भचभकत्सा अभधकारी द्वारा भचभकत्सा परीिण - (1) अनुच्छेि 1 में नननियष्ट प्रनियाओं में ननयोनजि प्रत्येक कमयचारी की उसके पहले रोजगार के

15 निनों के र्ीिर एक नचनकत्सा अनधकारी द्वारा जाँच की जाएगी। ऐसी जाँच में त्वचाशोि के नलए त्वचा परीक्षर् शानमल होगा और नकसी र्ी कमयचारी

134

DELHI GAZETTE : EXTRAORDINARY

PART IV]

को कारखाने में उसके पहले रोजगार के 15 निनों के बाि काम करने की अनुमनि नहीं िी जाएगी, जब िक नक नचनकत्सा अनधकारी द्वारा उसे ऐसे रोजगार

के नलए उपयुि प्रमानर्ि न कर निया जाए।

(2) मैंगनीज प्रनिया में काययरि प्रत्येक कमयचारी की प्रत्येक 12 माह में कम से कम एक बार नचनकत्सा अनधकारी द्वारा पुनिः जाँच की जाएगी और ऐसी

जाँच में, जहाँ र्ी नचनकत्सा अनधकारी उनचि समझे, उप-अनुच्छेि (1) के सर्ी परीक्षर् शानमल होंगे।

(3) नचनकत्सा अनधकारी, कमयचारी की जाँच के बाि, प्रपत्र-24 में स्वास््य प्रमार्पत्र जारी करेगा। की गई जाँच और पुनिः जाँच का ररकॉडय प्रमार्पत्र में

िजय नकया जाएगा और प्रमार्पत्र कारखाने के अनधर्ोगी की अनर्रक्षा में रखा जाएगा। उप-अनुच्छेि (1) और (2) के अंिगयि की गई प्रत्येक जाँच का

ररकॉडय, नजसमें इन परीक्षर्ों की प्रकृनि और पररर्ाम शानमल हैं, नचनकत्सा अनधकारी द्वारा प्रपत्र-05 में एक स्वास््य रनजस्टर में र्ी िजय नकया जाएगा।

(4) स्वास््य प्रमार्पत्र और स्वास््य रनजस्टर को ननरीक्षक-सह-सुनवधाकिाय द्वारा ननरीक्षर् के नलए ित्परिापूवयक उपलब्ध रखा जाएगा।

(5) यनि नकसी र्ी समय नचनकत्सा अनधकारी की यह राय हो नक कोई कमयचारी उि प्रनियाओं में इस आधार पर रोजगार के नलए उपयुि नहीं है नक इसमें

बने रहने से कमयचारी के स्वास््य को नवशेर् खिरा होगा, िो वह अपने ननष्ट्कर्ों को उि प्रमार्पत्र और स्वास््य रनजस्टर में िजय करेगा। इन िस्िावेजों में

उसके ननष्ट्कर्ों की प्रनवनष्ट में वह अवनध र्ी शानमल होनी चानहए नजसके नलए वह समझिा है नक उि व्यनि उि प्रनिया में काम करने के नलए अयोग्य है।

उसे वैकनल्पक ननयुनि की सुनवधा प्रिान की जाएगी, जब िक नक वह नचनकत्सा अनधकारी की राय में पूरी िरह से अक्षम न हो, ऐसी नस्िनि में प्रर्ानवि

व्यनि का उपयुि रूप से पुनवायस नकया जाएगा।

(6) कोई र्ी व्यनि जो उप-अनुच्छेि (5) में बिाए अनुसार काम करने के नलए अयोग्य पाया गया है, उसे उि प्रनियाओं में िब िक पुनिः ननयोनजि या

काम करने की अनुमनि नहीं िी जाएगी जब िक नक नचनकत्सा अनधकारी, आगे की जांच के बाि, उसे पुनिः उन प्रनियाओं में रोजगार के नलए योग्य प्रमानर्ि

न कर िे।

19. छूट - यनि नकसी कारखाने के संबंध में, मुख्य ननरीक्षक-सह-सुनवधािािा इस बाि से संिुष्ट है नक असाधारर् पररनस्िनियों या प्रनियाओं की आवृनत्त

में कमी या नकसी अन्य कारर् से, इस अनुसूची के सर्ी या कोई र्ी प्रावधान कारखाने में श्रनमकों की सुरक्षा के नलए आवश्यक नहीं हैं, िो मुख्य ननरीक्षक-

सह-सुनवधािािा एक नलनखि प्रमार् पत्र जारी कर सकिा है, नजसे वह अपने नववेकानुसार नकसी र्ी समय रद्द कर सकिा है, ऐसे कारखाने को ऐसे सर्ी या

नकसी र्ी प्रावधान से छूट िे सकिा है, बशिे नक वह उसमें नननियष्ट शिों, यनि कोई हों, के अधीन हो।

..............................

अनुसूची – XXVIII

जूटभमिों में प्रयुक्‍त मशीनरी के उपयोर् को छोडकर कपडा मशीनरी

1. अनुप्रयोर्: - यह अनुसूची उन कारखानों की मशीनरी पर लागू होगी जो जूट वस्त्रों के अलावा अन्य वस्त्रों के नवननमायर् या प्रसंस्करर् में लगे हैं, नजसमें नवशेर् रूप से

नसंिेनटक रेशों के नवननमायर् में लगे कारखानों की मशीनरी शानमल नहीं है।

2. पररिाषाएँ;- इस अनुसूची के प्रयोजनों के नलए:

(क) "कैलेंडर" का अिय है ऊध्वायधर पाश्वय फ्रेम पर लगे र्ारी रोलर का एक सेट जो उनके बीच कपडा डालने के नलए व्यवनस्िि होिा है, नजसमें िो से िस रोलर या कटोरे

हो सकिे हैं, नजनमें से कुछ को गमय नकया जा सकिा है:

(ख) "काडय" का अिय है नवनर्न्न आकारों के नसलेंडरों से युि एक मशीन नजसमें ्लैट र्ी शानमल हैं। काडय क्ट्लोनिंग से ढका हुआ और प्रत्येक के सापेक्ष इस प्रकार सेट

नकया गया है नक स्टेपल रूप में रेशों को अलग-अलग संबंधों में नवर्ानजि नकया जा सके।

(ग) "काडय क्ट्लोनिंग" का अिय है वह सामग्री नजससे काडय के नसलेंडर, डॉफर ्लैट आनि की सिहें ढकी होिी हैं और यह एक मोटी आधार सामग्री से बनी होिी है जो

या िो टेक्ट्सटाइल फैनब्रक से बनी होिी है, नजसके माध्यम से कई बारीक, ननकट-िूरी वाले नवशेर् रूप से मुडे हुए िार या आरी-िांिेिार िार गुजारे जािे हैं;

(घ) "कॉम्बर" का अिय है कपास, ऊन आनि के रेशों को कंघी करने की मशीन, नजसके आवश्यक र्ाग हैं ननयनमि अंिराल पर रेशों की एक नफ्रंज को आगे बढाने का

उपकरर् और कंनघयों या नपनों की एक व्यवस्िा, जो सही समय पर नफ्रंज से होकर गुजरिी हैं और नजनके द्वारा उलझे हुए रेशों को जोडा जािा है। छोटे रेशों और ननप्स

को हटा निया जािा है और लंबे रेशों को समानांिर नबछाया जािा है;

[PART IV

DELHI GAZETTE : EXTRAORDINARY

135

(ङ) "कंघी करने वाली मशीनरी" का अिय है मशीनों का एक सामान्य वगीकरर्, नजसमें कंबर, नसल्वर लैप मशीनें शानमल हैं। ररबन लैप मशीनें और नगल बॉक्ट्स, लेनकन

काडय को छोडकर;

(च) "ननरंिर नवरंजन रेंज" का अिय है रस्सी या खुले-चौडे रूप में कपडे को नवरंजन करने के नलए प्रयुि मशीन;

स्पष्टीकरण: (1) कपडा गीला होने के बाि, एक ननचोडने वाले रोल से होकर कानस्टक सोडा के घोल वाले संिृप्तक में जािा है और नफर एक बंि जे.बॉक्ट्स में। जे.बॉक्ट्स

के सामने वाले र्ाग पर एक V आकार की व्यवस्िा जुडी होिी है िानक कपडे को र्ाप से समान रूप से और िेज़ी से संिृप्त नकया जा सके, इससे पहले नक उसे जे.बॉक्ट्स

में पैक नकया जाए; कपडा, एकल-िंिु रस्सी के रूप में िूसरे हाि के ऊपरी नसरे पर "V" के पहले हाि से नीचे एक गाइड रोल के ऊपर से गुज़रिा है िानक कपडा इस

नबंिु पर िेज़ी से र्ाप से संिृप्त हो जाए; जे.बॉक्ट्स की क्षमिा ऐसी होिी है नक कपडा पयायप्त समय िक गमय रहेगा, नजससे सफाई की निया पूरी हो सके; नफर यह बीच में

एक ननचोडने वाले रोल के साि वाशरों की एक श्रृंखला से होकर गुजरिा है; नफर कपडा संिृप्तक, जे-बॉक्ट्स और वॉशर के िूसरे सेट से होकर गुजरिा है, जहाँ इसे

पेरोक्ट्साइड घोल से उपचाररि नकया जािा है;

स्पष्टीकरण:- (2) इकाई के आकार में िोडा सा संशोधन करके, वही प्रनिया, जैसा नक स्पष्टीकरर् (1) में बिाया गया है, खुले-चौडाई वाले कपडे पर लागू की जा

सकिी है;

(छ) "एम्बॉनसंग कैलेंडर" का अिय है िो या अनधक रोल वाला कैलेंडर, नजनमें से एक का उपयोग कपडे पर नवनर्न्न प्रकार के आकृनि प्रर्ाव उत्पन्न करने के नलए नकया

जािा है;

(ज) "गानेट मशीन" का अिय है ऊन, कपास, रेशम आनि के कठोर मुडे हुए कचरे को खोलने के नलए कई प्रकार की मशीनें, नजनमें अननवायय रूप से एक लॉकर होिा है

- एक या एक से अनधक नसलेंडर नजनमें से प्रत्येक में एक पूरक काययकिाय और नस्रंगर रोल, और एक फैंसी रोल और डोफर होिा है।

स्पष्टीकरण: - ऐसी मशीनों की निया कुछ हि िक वूलकाडय जैसी होिी है, लेनकन यह बहुि अनधक गंर्ीर होिी है क्ट्योंनक नवनर्न्न रोल काडय क्ट्लॉनिंग के बजाय गानेट

िार से ढके होिे हैं;

(झ) "नगल बॉक्ट्स" का अिय है यानय ननमायर् की वस्टेड प्रर्ाली में प्रयुि एक मशीन जो इसे समानांिर िम में व्यवनस्िि करने का कायय करिी है और अननवायय रूप से,

इसमें फीड रोल की एक जोडी और फॉलोअर की एक श्रृंखला होिी है जहाँ फॉलोअर िेज़ सिही गनि से चलिे हैं और संयुि निया के रूप में कायय करिे हैं;

(ञ) "इन-रननंग रोल" का अिय है रोल या ड्रम की कोई र्ी जोडी नजसके बीच एक 'ननप' होिा है;

(ट) "इंटर-लॉनकंग व्यवस्िा" का अिय है एक उपकरर् जो मशीन के नकसी खिरनाक नहस्से या स्वयं मशीन को गनि में आने से रोकिा है जबनक खिरे से बचाव के नलए

प्रिान नकया गया गाडय, कवर या िरवाजा ओपन या अनलॉक हो, और जो गाडय, कवर या िरवाजे को बंि और लॉक र्ी रखेगा- जब मशीन या उसका खिरनाक नहस्सा

गनि में हो;

(ठ) "कीर" का अिय है बडा मैटल वैट, आमिौर पर एक प्रैसर टाइप, नजसमें कपडों को उबाला, ब्लीच आनि नकया जा सकिा है।

(ड) "लूम" का अिय है एक मशीन जो िो धागों की श्रृंखलाओं को एक िूसरे को समकोर् पर पार करिे हुए इंटरलॉक करिी है नजसके द्वारा िाना धागों को िाना बीम पर

लपेटा जािा है और नबना हेड और रीड्स के माध्यम से गुजारा जािा है और र्राई को एक शटल में पार नकया जािा है और रीड और स्ले द्वारा जगह पर स्िानपि नकया

जािा है, और कपडे को एक कपडे के बीम पर लपेटा जािा है;

(ढ) "म्यूल" का अिय है एक प्रकार का किाई फ्रेम नजसमें एक हेड स्टॉक और एक कैररज होिा है, जो इसके िो मुख्य र्ाग होिे हैं, हेड स्टॉक नस्िर होिा है और कैररज

चलायमान होिा है और इसमें िकुए होिे हैं जो रोनवंग को धागे में ड्रा्ट और नस्पन करिे हैं और उसे पूरी मशीन पर फैलािे हैं, जो नस्पननंग ऑप्रेरशन के िौरान धीरे धीरे

हेड स्टॉक की ओर आिा है और उससे िूर जािा है;

136

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(र्) "मसयराइनजंग रेंज" का अिय है एक 3-बाउल वाला मैंगल, एक टेंटर फ्रेम, और धुलाई ििा सफाई के नलए कई बॉक्ट्स, जहाँ पूरा सेट एक सीधी रेखा में होिा है और

सर्ी र्ाग लगािार काम करिे हैं;

नोट:-इस संयोजन का उपयोग कपडे को सोनडयम हाइड्रॉक्ट्साइड से संिृप्त करने, संिृप्त होने पर इसे खींचने और िनाव मुि करने से पहले अनधकांश कानस्टक को धोने के

नलए नकया जािा है;

(ि) 'ननप' का अिय िो रोल या ड्रम के बीच का ख़िरा क्षेत्र है, जो अपनी नस्िनि और गनि के कारर् नननपंग का ख़िरा पैिा करिा है;

(ि) "ओपनर और नपकर" का अिय मशीनरी का एक सामान्य वगीकरर् है, नजसमें ब्रेकर नपकर, इंटरमीनडएट नपकर, नफननशर नपकर, नसंगल प्रोसेस नपकर, नवलो मशीन,

काडय और नपकर वेस्ट क्ट्लीनर, थ्रेड एक्ट्सरैक्ट्टर श्रेनडंग मशीन, रोनवंग वेस्ट ओपनर, शॉडी नपकर, बेल ब्रेकर, फीडर, वनटयकल ओपनर, लैनटस क्ट्लीनर, हॉररजॉन्टल क्ट्लीनर

और नसलेंडर, स्िीन सेक्ट्शन, कैलेंडर सेक्ट्शन, रोलर या बीटर से सुसनज्जि कोई र्ी समान मशीनरी शानमल है नजसका उपयोग आगे की प्रनिया के नलए स्टॉक िैयार करने

के नलए नकया जािा है;

(ि) "पैडलर" का अिय है घोल के नलए एक गिय और िो या िो से अनधक ननचोडने वाले रोल नजनके बीच से कपडा मॉडेंट या डाई बाि से गुजरने के बाि गुजरिा है;

(ध) "प्लेनटंग मशीन" का अिय है एक मशीन नजसका उपयोग बाि की प्रनिया या उपयोग की सुनवधा के नलए कपडे को ननयनमि लंबाई के िहों में नबछाने के नलए नकया

जािा है;

(न) "ररबन लैपर" का अिय है कपास की कंघी डालने के नलए लैप्स िैयार करने हेिु प्रयुि मशीन या मशीन का एक र्ाग, नजसका उद्देश्य एक समान लैप प्रिान करना है

नजसमें रेशों को यिासंर्व सीधा नकया गया हो;

(प) "रोटरी स्टेपल कटर" का अिय है एक या एक से अनधक रोटरी ब्लेडों वाली मशीन नजसका उपयोग कपडा रेशों को स्टेपल लंबाई में काटने के नलए नकया जािा है;

(फ) "रोलर नप्रंनटंग मशीन" का अिय है कपडों की छपाई के नलए प्रयुि एक मशीन नजसमें एक बडा केंद्रीय नसलेंडर या प्रेशर बाउल होिा है नजसके पररनध के ननचले र्ाग

के चारों ओर उत्कीर्य रंगीन रोलसय (प्रत्येक में एक रंगीन गिय), एक फननयशर रोलर, डॉक्ट्टर ब्लेड आनि की एक श्रृंखला रखी जािी है;

(ब) "नसल्वर लैपर" का अिय है एक मशीन या मशीन का एक र्ाग नजसमें कई समानांिर काडय नसल्वर को िोडा सा ड्रा्ट नकया जािा है, एक कॉम्पैक्ट्ट शीट में एक साि

रखा जािा है और एक बेलनाकार पैकेज में लपेटा जािा है;

(र्) "स्टाचय मैंगल" का अिय है एक मैंगल जो नवशेर् रूप से सूिी वस्िुओं को स्टाचय करने के नलए उपयोग नकया जािा है, और इसमें आमिौर पर िो बडे रोल और एक

उिला खुला टब होिा है नजसमें कई इमरशन रोल होिे हैं;

(म) "सल्फररन जंग मशीन" का अिय है एक मशीन नजसमें एक बडा र्ाप से गमय नसलेंडर और एंडलेस, निग वुलन फेल्‍ट ब्‍लैंनकट होिा है जो अपनी अनधकांश पररनध के

नलए नसलेंडर के ननकट संपकय में रहिा है और एक नवद्युि रूप से हीनटड शू होिा है जो कपडे को उस समय ब्‍लैंनकट के नवरुि िबािा है जब ब्‍लैंनकट नखंचा हुआ होिा है

क्ट्योंनक यह फीड-इन रोल के चारों ओर घूमिा है;

(य) "किरनी मशीन" का अिय है कपडा काटने के नलए उपयोग की जाने वाली एक मशीन नजसमें काटने की निया एक ऐसे रोलर पर सनपयल रूप से लगे कई स्टील ब्लेडों

द्वारा की जािी है जो एक नफक्ट्‍स ऐज ब्लेड के ननकट संपकय में घूमिा है।

(र) "नसंनगंग मशीन" का अिय है एक मशीन नजसमें एक गमय रोलर, एक प्लेट, या एक ओपन गैस ्लेम होिी है नजसके द्वारा कपडे या धागे को रोलर या प्लेट के ऊपर

या ओपन गैस ्लेम के माध्यम से िेजी से गुजारा जािा है िानक कपडे की संरचना में रोएँ जलाकर हटा निए जा सकें;

(ल) "स्लेशर" का अिय है एक मशीन नजसका उपयोग िाने के धागों पर साइज़ नमश्रर् लगाने के नलए नकया जािा है, नजसमें अननवायय रूप से सेक्ट्शन बीम को पकडने के

नलए एक स्टैंड, एक साइज़ बॉक्ट्स, एक या एक से अनधक बेलनाकार ड्रायर या एक बंि गमय हवा वाला ड्रायर, और करघे के बीम पर धागे को लपेटने के नलए एक बीनमंग

एंड होिा है;

(व) "टेंटेड फ्रेम" का अिय है टेंशन में कपडा सुखाने के नलए एक मशीन नजसमें अननवायय रूप से महीन नपनों की नक्ट्लप युक्ट्‍ि सिि रेवनलंग चेन की एक जोडी होिी है

[PART IV

DELHI GAZETTE : EXTRAORDINARY

137

जो रैक्ट्‍स पर रखी जािी है और कपडे को िो श्रृंखलाओं द्वारा नकनारों पर मजबूिी से पकडा जािा है जो आगे बढने पर अलग हो जािी हैं िानक कपडा वांनछि चौडाई िक

लाया जा सके;

(र्) "वॉपयर" का अिय है कपडे के िाने के नलए धागे को िैयार करने और व्यवनस्िि करने वाली एक मशीन, नवशेर् रूप से एक बीम वॉरपर; और

(श) "वॉटर मैंगल" का अिय है एक कैलेंडर नजसमें िो या िो से अनधक रोल होिे हैं नजनका उपयोग सुखाने से पहले कपडों से पानी ननचोडने या नवनर्न्न कपडों की

नफनननशंग के नलए नकया जािा है।

3. सामान्य सुरिा आिश्यकताएँ;-

(1) प्रत्येक कपडा मशीन को ऐसी मशीनों को शुरू करने और रोकने के नलए अलग-अलग यांनत्रक या नवद्युि साधन प्रिान नकए जाने चानहए और बेल्ट और शान्टंग

द्वारा संचानलि मशीनों पर बेल्ट नश्टर में एक बेल्ट नश्टर लॉक या एक समिुल्य सकारात्मक लॉनकंग उपकरर् प्रिान नकया जाना चानहए।

(2) रोकने और शुरू करने वाले हैंडल या अन्य ननयंत्रर् इस प्रकार नडज़ाइन और ऐसी नस्िनि में होने चानहए नक ऑपरेटर के हाि या उंगनलयां मशीन के नकसी र्ी

गनिशील र्ाग या नकसी अन्य र्ाग से टकराने से बचें।

(3) सर्ी बेल्ट, पुली, नगयर, चेन, स्प्रोकेट, पनहए और मशीनरी के अन्य खिरनाक चलने वाले नहस्से जो या िो मशीनरी का नहस्सा हैं या इसके साि उपयोग नकए जािे

हैं, र्ली-र्ांनम सुरनक्षि नकए जाएंगे।

4. ओपनर और भपकर;- (1) सर्ी चालू या नपकर मशीनरी में;-

(i) बीटर और अन्य खिरनाक नहस्सों को गाडय द्वारा सुरनक्षि रूप से घेरा जाएगा िानक उनके संपकय को रोका जा सके; और

(ii) i) मशीनरी के नकसी र्ी खिरनाक नहस्से िक पहुँच प्रिान करने वाले गाडय और िरवाजे या ओपननंग के कवर में इंटर-लॉनकंग व्यवस्िा की जाएगी:

परन्‍िु, यह उपबंनधि है नक बीटर कवर के अलावा नकसी र्ी खिरनाक नहस्से िक पहुँच प्रिान करने वाले िरवाजों या ओपननंग्स के कवसय के मामले में, इंटर-लॉनकंग

व्यवस्िा के बजाय ऐसे ओपननंग्स को गाडों द्वारा फेंन्‍स नकया जा सकिा है जो ऐसे नकसी र्ी खिरनाक नहस्से िक पहुँच को रोकिे हैं और नजन्हें या िो हमेशा के नलए

लॉक करके रखा जािा है या इस िरह से नस्िर नकया जािा है नक उन्हें हाि के औजारों के उपयोग के नबना हटाया नहीं जा सकिा।

(2) सर्ी ओपननंग और नपनकंग मशीनों पर फीड रोल एक गाडय से ढके होंगे जो ऑपरेटर को मशीन के संचालन के िौरान ननप िक पहुँचने से रोकने के नलए नडज़ाइन

नकया गया है।

(3) लैप बनाने वाले रोलसय पर एक गाडय या कवर लगाया जाएगा जो लैप रोलर और ्लूटेड रोलर के इनटेक पर ननप िक पहुँचने को रोकेगा जब िक नक र्ाररि रैक नीचे

हो और गाडय या कवर इस िरह से लॉक नकया जाएगा नक इसे िब िक नहीं उठाया जा सकिा जब िक नक मशीन बंि न हो जाए, और मशीन को िब िक शुरू नहीं नकया

जा सकिा जब िक नक गाडय का कवर बंि न हो जाए:

परन्‍िु यह उपबंनधि है नक पूवोि प्रावधान स्वचानलि लैप बनाने वाले उपकरर्ों से सुसनज्जि मशीनों पर लागू नहीं होगा :

इसके अलावा, यह र्ी प्रावधान है नक स्वचानलि लैप बनाने वाले उपकरर् से सुसनज्जि ऐसी नकसी र्ी मशीन का उपयोग िब िक नहीं नकया जाएगा जब िक नक

स्वचानलि लैप बनाने वाला उपकरर् कुशल काययशील नस्िनि में न हो।

5. कॉटन काडय -(1) सर्ी नसलेंडर के िरवाज़े एक इंटरलॉनकंग व्यवस्िा द्वारा सुरनक्षि नकए जाएँगे जो नसलेंडर के घूमने बंि होने िक िरवाज़े को खुलने से रोकेगा और

जब िक िरवाज़ा बंि न हो जाए, मशीन को पुनिः चालू करना असंर्व बना िेगा:

138

DELHI GAZETTE : EXTRAORDINARY

PART IV]

परन्‍िु यह उपबंनधि है नक स्वचानलि लॉनकंग उपकरर् के संबंध में परविी अपेक्षा नस्रनपंग या ग्राइंनडंग कायों के िौरान लागू नहीं होगी:

यह र्ी उपबंनधि है नक नस्रनपंग या नग्रंनडंग का कायय केवल नवशेर् रूप से प्रनशनक्षि वयस्क श्रनमकों द्वारा ही नकया जाएगा जो चुस्ि "नफनटंग कपडे" पहने होंगे। लीकर-इन

को इस प्रकार सुरनक्षि नकया जाएगा नक खिरनाक र्ागों िक पहुंच को रोका जा सके।

(2) प्रत्येक काडय में ऐसी व्यवस्िा होनी चानहए नजससे नस्रनपंग या ग्राइंनडंग कायों के िौरान काडय नसलेंडर को शनि द्वारा संचानलि नकया जा सके, नबना मुख्य बेल्ट को

मशीन की िेज़ पुली पर स्िानांिररि नकए या नबना इंटरलॉनकंग िंत्र को हटाए और ऐसी व्यवस्िा का उपयोग केवल नस्रनपंग या ग्राइंनडंग कायों के नलए ही नकया जाएगा।

6. र्ानेट मशीनें- (1) गानेट नलकर-इन्स को बंि नकया जाएगा और गानेट फैंसी रोल्स को गाडय द्वारा बंि नकया जाएगा और उन्हें इस िरह से स्िानपि नकया जाएगा नक

वकय रोल्स को ननकालने या समायोजन के नलए उनचि रूप से सुलर् रखा जा सके।

(2) गानेट के ननचले नहस्से को स्िीन मेस या अन्य प्रकार के बाडों द्वारा सुरनक्षि नकया जाएगा िानक वहां प्रवेश रोका जा सके।

7. भर्ि बॉक्स -(1) फीड को इस प्रकार सुरनक्षि नकया जाएगा नक उंगनलयों को प्रनिच्छेि करने वाले नफलसय के नपनों में फंसने से रोका जा सके।

(2) इन-रननंग रोल्स के सर्ी ननप्स को ननम्ननलनखि नवननिेशों के अनुरूप उपयुि ननप गाडय द्वारा सुरनक्षि नकया जाएगा।

नकसी र्ी खुले स्िान को, नजसे गाडय द्वारा नस्िनि में नफट नकए जाने पर अनुमनि िी जा सकिी है, उस खुले स्िान से नकसी र्ी ननप नबंिु िक की िूरी के संबंध में सीनमि

नकया जाएगा, नकसी र्ी ननप नबंिु से उस खुले स्िान िक की अनधकिम चौडाई ननम्ननलनखि से अनधक नहीं होगी:-

गाडय के उपयुक्ट्‍ि नस्िनि में नफट हो जाने पर र्ी कोई ओपननंग छूट सकिी है, नजसे ननप नबंिु से उस ओपननंग की िूरी के संबंध में इस प्रकार प्रनिबंनधि नकया जाएगा नक

ओपननंग की अनधकिम चौडाई ननम्ननलनखि से अनधक नहीं होगी: -

भनप भबंिु से ओपभनंर् की िूरी

ओपभनंर् की अभधकतम चौडाई

0 से 38 एमएम

6 एमएम

39 से 63 एमएम

10 एमएम

64 से 88 एमएम

13 एमएम

89 से 140 एमएम

15 एमएम

141 से 165 एमएम

19 एमएम

166 से 190 एमएम

22 एमएम

191 से 215 एमएम

32 एमएम

8. भसल्िर एड ररबन िैपसग (कॉटन) - नसलेंडर ड्रम और लैप पूल में एक गाडय लगाया जाएगा िानक इन-रननंग रोल्स के बीच ननप िक पहुँच को रोका जा सके।

9. स्पीड फ्रेम जैक बॉक्स : पनहयों में हेड स्टॉक पर बैंड गाडय इंटरलॉनकंग व्यवस्िा होनी चानहए।

10. भस्पभनंर् म्यूल्स - नस्पननंग म्यूल्स गानडयों के पनहयों में पयायप्त व्हील गाडय लगे होने चानहए, जो रेल से 6 नममी के र्ीिर िक फैले होने चानहए।

11. िॉरपर - न्यूनिम 410 मीटर से अनधक िूरी पर चलने वाले सर्ी वॉरपरों पर घूमने वाले डबल-बार गेट लगाए जाने चानहए और उनमें इंटरलॉनकंग व्यवस्िा होनी

चानहए, नसवाय इंनचंग या जॉनगंग के उद्देश्य के।

परन्‍िु यह उपबंनधि है नक गेटों की ऊपरी और ननचली परट्टयां फशय या काययशील प्लेट फॉमय से कम से कम 1.05 और 0.53 मीटर ऊंची होंगी, और गेट ऊध्वायधर टेनेमेंट

से बीन हेड िक 38 नममी की िूरी पर लॉक नकया जाएगा।

12 स्िेशर: - (1) नसलेंडर ड्रायर:- क) चालू रोल के सर्ी खुले ननप्स को खंड 7 में िी गई आवश्यकिाओं के अनुरूप ननप गाडय द्वारा सुरनक्षि नकया जाएगा।

ख) जब स्लेशर को ननयंत्रर् लीवर द्वारा संचानलि नकया जािा है, िो ये लीवर नकसी र्ी नबंिु से संचालन को ननयंनत्रि करने के नलए फशय से 170 नममी से अनधक ऊपर

नस्िि क्षैनिज बार या रेडल से जुडे होंगे।

[PART IV

DELHI GAZETTE : EXTRAORDINARY

139

ग) ऐसे बटन ननयंत्रर् द्वारा संचानलि स्लेशर में मशीन के प्रत्येक छोर पर स्टॉप और स्टाटय बटन होंगे, और मशीन के िोनों ओर साइज़ बॉक्ट्स और नडलीवरी छोर पर

अनिररि बटन होंगे और यनि कैलेंडर रोल का उपयोग नकया जािा है, िो मशीनों के िोनों ओर ननप्स के पास नबंिुओं पर अनिररि बटन प्रिान नकए जाएंगे, नसवाय िब

जब स्लेशर खंड (ख) के अनुसार एक संलग्न ड्रायर से सुसनज्जि हों।

2 संिग्न हॉट एयर ड्रायर -

(क) ऊपरी नस्क्ट्वनजंग रोलसय के सर्ी खुले ननप को खंड 7 के उप-खंड (2) में नननियष्ट आवश्यकिाओं के अनुरूप ननप गाडय द्वारा सुरनक्षि नकया जाएगा।

(ख) जब स्लेशर को ननयंत्रर् परिों द्वारा संचानलि नकया जािा है, िो ये लीवर नकसी र्ी नबंिु से संचालन को ननयंनत्रि करने के नलए फशय से 170 सेमी से अनधक ऊँचाई

पर नस्िि क्षैनिज बार या रेडल से जुडे होंगे।

(ग) पुश-बटन ननयंत्रर् द्वारा संचानलि स्लेशर में मशीन के प्रत्येक नसरे पर स्टॉप और स्टाटय बटन होंगे और अनिररि स्टॉप और स्टाटय बटन मशीन के िोनों ओर केंद्रों पर

1.83 मीटर से अनधक अंिराल पर नस्िि होंगे।

13 करर्े:-

(क) प्रत्येक करघे में ्लाइंग शटल्‍स से होने वाले खिरे को कम करने के नलए उपयुि सुरक्षा कवच लगाए जाएँगे।

(ख) बीम में िनाव के नलए बीम र्ार इस प्रकार बनाए जाएँगे नक समायोजन के िौरान वह नगर न जाए।

14 कीरों, टैंकों और अन्य पात्रों के िाल्ि -

(क) कीर या नकसी अन्य टैंक या पात्र में र्ाप, हाननकारक गैसों या द्रवों के प्रवाह को ननयंनत्रि करने वाले प्रत्येक वाल्व में, नजसमें नकसी व्यनि के नकसी प्रनिया, संचालन,

रखरखाव या नकसी अन्य उद्देश्य के नलए प्रवेश करने की संर्ावना हो, एक उपयुि लॉक लगा होगा िानक वाल्व को बंि नस्िनि में सुरनक्षि रूप से रखा जा सके और कीर

टैंक या पात्र में प्रवेश करने से पहले चाबी अपने पास रखी जा सके।

(ख) जहाँ कहीं र्ी उबलने वाले टैंक, कानस्टक टैंक और कोई अन्य पात्र, नजनसे गमय, संक्षारक या नवर्ैले िरल पिािय बहकर बाहर ननकल सकिे हैं या छलक सकिे हैं,

इस प्रकार नस्िि हों नक संचालक फशय या कायय क्षेत्र से उनकी सामग्री को न िेख सके, वहाँ खिरे से बचने के नलए आपािकालीन शट-ऑफ वाल्व लगाए जाएँगे, नजन्हें

छलकने के खिरे से मुि स्िान से ननयंनत्रि नकया जा सके।

15. कतरनी मशीनें: - किरनी मशीनों के सर्ी घूमने वाले ब्लेडों को इस प्रकार सुरनक्षि नकया जाएगा नक कपडे की सिह और गाडय के ननचले र्ाग के बीच का छेि

10 नममी से अनधक न हो।

16. सतत ब्‍िीभचंर् रेंज (कपास और रेयान):- खुली चौडाई वाली नवरंजन मशीन के रोलों पर सर्ी चनलि रोलों के ननप को एक गाडय से सुरनक्षि नकया जाएगा िानक

श्रनमक ननप में फँसने से बच सके और गाडय ननप की पूरी लंबाई िक फैला हो।

17 मसगराइभजंर् रेंज (पीस र्ुड्स) :-

(1) मशीन के प्रत्येक नसरे पर एक अवरोधक उपकरर् लगाया जाएगा।

(2) फ्रेम के प्रत्येक नसरे पर इन-रननंग चेन और नक्ट्लप ओपनर के बीच एक गाडय प्रिान नकया जाएगा।

140

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(3) मैंगल और वॉशर के इन-रननंग रोल के नलए एक ननप गाडय प्रिान नकया जाएगा और गाडय खंड 7 के उप-खंड (2) में नननियष्ट आवश्यकिाओं के अनुरूप होगा।

18 टेंटेड फ्रेम:-

(1) मशीन के प्रत्येक नसरे पर एक स्टॉनपंग नडवाइस प्रिान नकया जाएगा।

(2) मशीन फ्रेम के प्रत्येक नसरे पर इन-रननंग चेन और नक्ट्लप ओपनर पर एक गाडय प्रिान नकया जाएगा।

19 पैडिसग –

(1) सिी खतरनाक इन-रभनंर् रोल्स के भिए खंड 7 के उपखंड (2) में भनभिगष्ट आिश्यकताओं के अनुरूप उपयुक्त भनप र्ाडग प्रिान भकए जाएँर्े।

20 अपकेंद्री भनष्कषगक।-

(1) प्रत्येक भनष्कषगक में बास्केट के भिए एक र्ाडग प्रिान भकया जाएर्ा, और र्ाडग में इंटरिॉभकंर् व्यिस्र्था होर्ी।

(2) प्रत्येक भनष्कषगक में एक यांभत्रक या भिद्युत चाभित ब्रेक िर्ा होर्ा ताभक बास्केट को चिाने िािी

शभक्त बंि होने पर बास्केट को तुरंत रोका जा सके।

21. ररंर्र भनष्कषगक, िाटर मैंर्ि, स्टाचग मैंर्ि, बैक िॉशर (िस्टेड यानग), िैभबंर् मशीन और भडकैंभटंर् मशीन का स्क्िी र: - सिी इन-रभनंर् रोल्स को

खंड 7 के उपखंड (2) में भनभिगष्ट आिश्यकताओं के अनुरूप भनप र्ाडग से सुरभित भकया जाएर्ा।

22 सल्फ्यूरीकरण और पामर मशीन: -

(i) सिी सुिि इन-रभनंर् रोल्स पर भनप र्ाडग िर्ाए जाएँर्े

और ये खंड 7 के उप-खंड (2) में भनभिगष्ट आिश्यकताओं के अनुरूप होंर्े।

(ii) रभनंर् रोल्स के भनप्स तक भकनारों से पह ँच को उपयुक्त साइड र्ाडग द्वारा र्ेरा जाना चाभहए।

(iii) सिी पामर भसिेंडरों के आर्े और पीछे एक सुरिा भरप रॉड, केबि या िायर सेंटर कॉडग िर्ाई जाएर्ी जो भसिेंडर के सामने की िंबाई तक फैिी

हो, जो धकेिे जाने या खींचे जाने पर िी आसानी से काम करेर्ी और सुरिा भरप 170 सेमी से अभधक नहीं होर्ी। संचािन स्र्थि के स्तर से ऊपर और

आसानी से पह ँच योग्य होनी चाभहए।

23 रोप िॉशर:- (1) सिी रोप िॉशरों में स्प्िैश र्ाडग िर्ाए जाएँर्े, जब तक भक मशीन को इस तरह से भड ाइन न भकया र्या हो भक पानी या तरि पिार्थग

ऑपरेटर, फशग या काम करने िािी सतह पर न भर्रे।

(2) सिी रभस्सयों के आर्े और पीछे एक सुरिा भरप रॉड, केबि या तार केंद्र कॉडग प्रिान भकया जाएर्ा जो िॉशर के सामने की िंबाई तक फैिा होर्ा।

यह आसानी से संचाभित होर्ा, चाहे इसे धकेिा जाए या खींचा जाए।

सुरिा भरप ऑपरेटर के खडे होने के स्तर से 170 सेमी से अभधक नहीं होर्ी और आसानी से सुिि होर्ी।

24 कपडे धोने की मशीन का भर्िास या शेकर:

(1) प्रत्येक सुखाने वाला नगलास, प्रत्येक डबल नसलेंडर शेकर या कपडे धोने का नगलास, और प्रत्येक वानशंग मशीन एक इंटरलॉनकंग व्यवस्िा से सुसनज्जि होगी जो

केस या शैल पर बाहरी िरवाजा खुला होने पर अंिर के नसलेंडर के नबजली संचालन को रोकेगी, और जो केस या शैल में बाहरी िरवाजे को नबजली बंि नकए नबना खुलने

और नसलेंडर के रुकने से र्ी रोकेगी, लेनकन जो हाि से संचानलि िंत्र या इंनचंग नडवाइस के माध्यम से आंिररक नसलेंडर की गनि को नहीं रोकेगी।

(2) प्रत्येक बंि बैरल में गोले के आंिररक और बाहरी नसलेंडरों के िरवाजों या ढक्ट्कनों को लोड या अनलोड करिे समय खुला रखने के नलए पयायप्त साधन र्ी होने

चानहए।

25. भप्रंभटंर् मशीन (रोिर प्रकार) –

(1) सर्ी इन-रननंग रोल्स को खंड 7 के उप-खंड (2) में नननियष्ट आवश्यकिाओं के अनुरूप ननप गाडय द्वारा सुरनक्षि नकया जाएगा।

[PART IV

DELHI GAZETTE : EXTRAORDINARY

141

(2) उत्कीर्य रोलर नगयर और बडे िाउन व्हील को सुरनक्षि नकया जाएगा।

26. कैिेंडर - रोल्स के इन-रननंग साइड पर ननप की पूरी लंबाई में एक गाडय प्रिान नकया जाएगा और इसे इस िरह व्यवनस्िि नकया जाएगा नक श्रनमकों की उंगनलयां

रोल्स के बीच या गाडय और रोल्स के बीच न नखंचें, और इस प्रकार नसकोडा जाए नक कपडा सुरनक्षि रूप से रोल्स में डाला जा सके।

27. रोटरी स्टेपि कटर: - कटर को एक गाडय द्वारा सुरनक्षि नकया जाएगा िानक हाि कनटंग क्षेत्र िक न पहुँचें।

28. प्िेभटंर् मशीनें- नाइफ और काडय बार के बीच के रैप िक पहुँच को एक गाडय द्वारा रोका जाएगा।

29. हैंड बेभिंर् मशीन- मशीन के फ्रेम के समकोर् पर एक कोर्ीय लोहे का हैंडल-स्टॉप गाडय लगाया जाएगा, नजसका स्टॉप गाडय इस प्रकार नडज़ाइन और नस्िि होगा

नक यह हैंडल को ऊध्वायधर नस्िनि से आगे बढने से रोकेगा, जब हैंडल टेक-अप नगयर के िांिों से ननकल जाए।

30 फ्िैट-िकग आयरनर- प्रत्येक ्लैट-वकय या कॉलर आयरनर में फीड या प्रिम प्रैशर रोल से समूचे क्षेत्र में एक सुरक्षा बार या अन्य गाडय लगा होगा, नजसे इस प्रकार

व्यवनस्िि नकया जाएगा नक ऑपरेटर या अन्य व्यनि के हाि से बार या गाडय पर प्रहार करने पर मशीन रुक जाए। गाडय ऐसा होना चानहए नक ऑपरेटर या अन्य व्यनि गाडय

को हटाए नबना रोल में प्रवेश न कर सके। यह सर्ी िरफ एक ऊध्वायधर गाडय या एक पूर्य आवरर् हो सकिा है। यनि ऊध्वायधर गाडय का उपयोग नकया जािा है, िो फशय या

कायय मंच से गाडय के शीर्य िक की िूरी 1.83 मीटर से कम नहीं होगी।”

31. भचभकत्सा परीिण और अभििेख:-

(1) इस अनुसूची के अंिगयि आने वाली मशीनरी पर काययरि प्रत्येक कमयचारी की, उसके प्रिम ननयोजन के 15 निनों के र्ीिर एक नचनकत्सा अनधकारी द्वारा जाँच की

जाएगी। इस परीक्षर् में फु्फुसीय परीक्षर्, इम्युनोग्लोनबन परीक्षर्, ऑनडयोमेरी परीक्षर् आनि शानमल होंगे। नकसी र्ी कमयचारी को कारखाने में उसके प्रिम ननयोजन के

15 निनों के बाि िब िक काम करने की अनुमनि नहीं िी जाएगी जब िक नक नचनकत्सा अनधकारी द्वारा उसे ऐसे ननयोजन के नलए उपयुि प्रमानर्ि न कर निया जाए।

(2) उि प्रनियाओं में ननयोनजि प्रत्येक कमयचारी की, प्रत्येक बारह कैलेंडर महीनों में कम से कम एक बार, एक नचनकत्सा अनधकारी द्वारा पुनिः जाँच की जाएगी। ऐसी

पुनिः जाँच में, जहाँ र्ी नचनकत्सा अनधकारी उनचि समझे, उप-अनुच्छेि (1) में नननियष्ट परीक्षर् शानमल होंगे।

(3) नचनकत्सा अनधकारी, कमयचारी की जाँच करने के बाि, प्रपत्र-24 में एक योग्यिा प्रमार् पत्र जारी करेगा। की गई जाँच और पुनिः जाँच का ररकॉडय प्रमार् पत्र में िजय

नकया जाएगा और प्रमार् पत्र कारखाने के अनधर्ोगी की अनर्रक्षा में रखा जाएगा। उप-अनुच्छेि (1) और (2) के अंिगयि की गई प्रत्येक जांच का ररकॉडय, नजसमें

परीक्षर्ों की प्रकृनि और पररर्ाम शानमल हैं, नचनकत्सा अनधकारी द्वारा प्रपत्र-25 में एक स्वास््य रनजस्टर में र्ी िजय नकया जाएगा।

(4) स्वास््य प्रमार्पत्र और स्वास््य रनजस्टर को ननरीक्षक-सह-सुनवधाकिाय द्वारा ननरीक्षर् के नलए आसानी से उपलब्ध रखा जाएगा।

(5) यनि नकसी र्ी समय नचनकत्सा अनधकारी की राय में कोई कमयचारी उि प्रनिया में रोजगार के नलए इस आधार पर उपयुि नहीं है नक इस प्रनिया में बने रहने से

कमयचारी के स्वास््य को नवशेर् खिरा होगा, िो वह अपने ननष्ट्कर्ों को उि प्रमार्पत्र और स्वास््य रनजस्टर में िजय करेगा। इन िस्िावेजों में उसके ननष्ट्कर्ों की प्रनवनष्ट में

वह अवनध र्ी शानमल होनी चानहए नजसके नलए वह समझिा है नक उि व्यनि उि प्रनियाओं में काम करने के नलए अयोग्य है। प्रनिया से इस प्रकार ननलंनबि व्यनि

को वैकनल्पक स्िान-स्िापन सुनवधाएं प्रिान की जाएंगी, जब िक नक वह नचनकत्सा अनधकारी की राय में पूरी िरह से अक्षम न हो, ऐसी नस्िनि में प्रर्ानवि व्यनि का

उनचि पुनवायस नकया जाएगा।

(6) कोई र्ी व्यनि जो उप-अनुच्छेि (5) में उनल्लनखि अनुसार कायय करने के नलए अयोग्य पाया गया है, उसे उि प्रनियाओं में पुनिः ननयोनजि नहीं नकया जाएगा या

कायय करने की अनुमनि नहीं िी जाएगी जब िक नक नचनकत्सा अनधकारी, आगे की जांच के बाि, उसे उन प्रनियाओं में ननयोजन के नलए पुनिः योग्य प्रमानर्ि न कर िे।

142

DELHI GAZETTE : EXTRAORDINARY

PART IV]

अनुसूची – XXIX

इंडॅक्‍शन िट्टी में भपर्िने की प्रभिया

1. अनुप्रयोर्:

इस अनुसूची के प्रावधान कारखानों के उन सर्ी र्ागों पर लागू होंगे जहाँ धािु का नपघलने का कायय इंडॅक्ट्शन र्ट्टी में नकया जािा है और अन्य संबि प्रनियाएँ की जािी

हैं।

2. पररिाषाएँ:

(1) "इंडॅक्ट्शन र्ट्टी" से िात्पयय उस र्ट्टी से है नजसमें र्ट्ठी के चारों ओर नलपटी एक कुंडली से नवद्युि धारा प्रवानहि करके एक प्रबल चुंबकीय क्षेत्र उत्पन्न नकया जािा

है। यह चुंबकीय क्षेत्र बिले में नपघली जाने वाली धािु के आर-पार एक वोल्टेज और ित्पिाि उसमें से एक नवद्युि धारा उत्पन्न करिा है।

(2) "कुंडली" से िात्पयय इंडॅक्ट्शर्न र्ट्टी की कुंडली से है।

(3) "लाडल" से िात्पयय नपघली हुई धािु को ले जाने के नलए प्रयुि उपकरर् से है।

(4)

"साँचा"

से

िात्पयय

स्टील,

रेि,

िोमट

नमट्टी,

ढलाई

संरचना

या

अन्य

सामनग्रयों

के

नमश्रर्

से

बने

साँचे

से है।

(5) "व्यनिगि सुरक्षा उपकरर्" : व्यनिगि सुरक्षा उपकरर् (पीपीई) से िात्पयय, सुरक्षात्मक वस्त्र, हेलमेट, चश्मे, या अन्य वस्त्र या उपकरर् है, जो पहनने वाले के शरीर

को चोट या संिमर् से बचाने के नलए नडज़ाइन नकए गए हैं।

(6) "अपवियक" का अिय है गड्ढे में बनी अपवियक ईंटों की परि।

3. व्यिस्र्था और िंडारण - काययस्िलों में सुरक्षा और स्वच्छिा को बढावा िेने के उद्देश्य से, ननम्ननलनखि आवश्यकिाओं का पालन नकया जाएगा:-

(क) मोनल्डंग बॉक्ट्स, लोम प्लेट, करछुल, पैटनय, पैटनय प्लेट, फ्रेम, बोडय, बॉक्ट्स वेट और अन्य र्ारी वस्िुओं को इस प्रकार व्यवनस्िि और रखा जाएगा नक नबना नकसी

अनावश्यक जोनखम के काम नकया जा सके;

(ख) अन्य उपकरर्ों और औजारों के र्ंडारर् के नलए उपयुि और सुनवधाजनक रूप से सुलर् रैक, नडब्बे या अन्य पात्र उपलब्ध कराए जाएंगे और उनका उपयोग नकया

जाएगा;

(ग) जहाँ रेि, ईंधन, धािु स्िैप या अन्य सामग्री या अवशेर्ों का िोक र्ंडारर् हो, वहाँ ऐसे र्ंडारर् के नलए उपयुि नडब्बे, बंकर या अन्य पात्र उपलब्ध कराए जाएँगे।

4. प्िेटफॉमग और फशग का भनमागण, रखरखाि -

(1) र्ट्ठी का प्लेटफॉमय अच्छी बनावट, ठोस सामग्री और नवस्फोट को झेलने के नलए पयायप्त मज़बूि होना चानहए।

(2) प्लेटफॉमय का आकार इिना होना चानहए नक उस पर काम करने वाले लोग और कच्चा माल आसानी से आ सके।

(3) प्लेटफॉमय पर कम से कम िो सीनढयाँ होनी चानहए।

(4) नजन आंिररक काययस्िलों पर प्रनियाएँ की जािी हैं, उनके फशय, रेि के नहस्सों को छोडकर, कठोर सामग्री से बने होने चानहए।

(5) ऐसे नकसी र्ी आंिररक काययस्िल के फशय का कोई र्ी नहस्सा रेि का नहीं होगा नसवाय इसके नक वहाँ नकए जा रहे काम के कारर् ऐसा करना आवश्यक हो।

(6) ऐसे नकसी र्ी आंिररक काययस्िल के फशय की सिह के सर्ी नहस्से जो रेि के हैं, जहाँ िक संर्व हो, समिल और दृढ नस्िनि में बनाए रखे जाएँगे।

5. अभधकृत व्यभक्त: - (1) प्लेटफॉमय पर या र्ट्ठी के पास काम करने के नलए अनधकृि व्यनि के अलावा नकसी र्ी व्यनि को प्लेटफॉमय पर या र्ट्ठी के पास जाने की

अनुमनि नहीं िी जाएगी।

(2) उप-ननयम (1) के अपवाि के अंिगयि आने वाले व्यनि को प्रनशनक्षि होना चानहए और उसे ननधायररि कानमयक सुरक्षा उपकरर् प्रिान नकए जाने चानहए।

(3) कोई र्ी व्यनि नकसी र्ट्टी के नकसी र्ी टोंटी के नविरर् छोर से गुजरने वाली ऊध्वायधर रेखा से 4 मीटर की िूरी के र्ीिर कोई कायय नहीं करेगा, जो नपघली हुई धािु

[PART IV

DELHI GAZETTE : EXTRAORDINARY

143

ननकालने के नलए प्रयुि टोंटी है, या नकसी र्ी करछुल के ननकटिम र्ाग से गुजरने वाली ऊध्वायधर रेखा से 2.4 मीटर की िूरी के र्ीिर कोई कायय नहीं करेगा, जो ऐसी

टोंटी के अंि में नस्िि है, नसवाय इसके नक, िोनों ही मामलों में, जहाँ र्ट्टी के उनचि उपयोग और रखरखाव के नलए यह आवश्यक हो नक कायय उस िूरी के र्ीिर नकया

जाए, कायय ऐसे समय और ऐसी पररनस्िनियों में नकया जा रहा हो नक कायय करने वाले व्यनि को नपघली हुई धािु से कोई खिरा न हो, जो कपोला या र्ट्टी से प्राप्त की जा

रही हो या टोंटी के अंि में नस्िि करछुल में हो।

6. भनकास संयंत्र का रखरखाि और परीिण –

(1) धूल या धुएं को ननकालने, िबाने या ननयंनत्रि करने के उद्देश्य से उपयोग नकए जाने वाले सर्ी वेंनटलेशन संयंत्रों का उनचि रखरखाव नकया जाएगा।

(2) धूल या धुएं को ननकालने, िबाने या ननयंनत्रि करने के उद्देश्य से उपयोग नकए जाने वाले सर्ी वेंनटलेशन संयंत्रों की जाँच और ननरीक्षर् प्रत्येक सप्ताह एक नजम्मेिार

व्यनि द्वारा नकया जाएगा। प्रत्येक जाँच और परीक्षर् में कम से कम एक बार एक सक्षम व्यनि द्वारा इसकी पूरी िरह से जाँच और परीक्षर् नकया जाएगा और इसे प्रपत्र-

49 में एक रनजस्टर में िजय नकया जाएगा जो ननरीक्षक-सह-सुनवधाकिाय द्वारा ननरीक्षर् के नलए उपलब्ध होगा। ऐसी नकसी र्ी जाँच और परीक्षर् में पाए गए नकसी र्ी िोर्

की सूचना कारखाने के अनधर्ोगी को िी जाएगी।

7. करछुि

(1) गमय िरल धािु डालने के नलए करछुल रखने से पहले, इसका पूरी िरह से ननरीक्षर् नकया जाएगा।

(2) करछुल को टोंटी के नीचे रखें।

(3) डालना शुरू करने से पहले, यह सुनननिि नकया जाएगा नक:

(क) केवल न्यूनिम आवश्यक संख्या में व्यनि ही उपनस्िि हों।

(ख) वे सर्ी फेस शील्ड, अनग्नरोधी सूट, पायल, चश्मा, िस्िाने, हेलमेट और सुरक्षा जूिे जैसे पीपीई का उपयोग करेंगे।

(4) र्ट्टी प्रर्ारी की अनुमनि के बाि ही करछुल को हटाया जाएगा।

(5) करछुल को झुकाकर नहीं ले जाया जाएगा।

8. िट्टी का संचािन और रखरखाि:

(1) अनधर्ोगी ननमायिा द्वारा निए गए ननिेशों के अनुसार र्ट्टी का संचालन करेगा।

(2) अनधर्ोगी ननमायिा द्वारा निए गए रखरखाव काययिम के अनुसार र्ट्टी का रखरखाव करेगा।

(3) कॉइल की ननयनमि अंिराल पर जाँच की जानी चानहए।

(4) रेफ्रेक्ट्रीज को ननयनमि अंिराल पर बिला जाना चानहए।

9. कायग परभमट

अनधर्ोगी उस व्यनि को कायय परनमट जारी करेगा नजसे सीनमि स्िान, ऊँचाई पर या नबजली के उपकरर्ों पर काम करना है।

10. धुिाई की सुभिधा –

अनधर्ोगी को सर्ी ननयोनजि व्यनियों के उपयोग के नलए एक ढकी हुई धुलाई की जगह को साफ-सुिरी और अच्छी नस्िनि में उपलब्ध कराना होगा और उसका

रखरखाव करना होगा, नजसमें पानी, साबुन, िौनलया आनि की पयायप्त आपूनिय हो।

11. सुरिात्मक उपकरण –

144

DELHI GAZETTE : EXTRAORDINARY

PART IV]

अनधर्ोगी उप-ननयम (2) में नननियष्ट प्रनिया में काययरि सर्ी व्यनियों के नलए उपयुि पीपीई प्रिान करेगा और उनका रखरखाव करेगा।

12. र्िगिती मभहिा और भकशोर के रोजर्ार पर प्रभतबंध - नकसी र्ी गर्यविी मनहला या नकशोर को इस अनुसूची में शानमल नकसी र्ी प्रनिया में ननयोनजि नहीं

नकया जाएगा।

13. भचभकत्सा अभधकारी द्वारा भचभकत्सा परीिण - (1) अनुच्छेि 1 में नननियष्ट प्रनियाओं में काययरि प्रत्येक कमयचारी की उसके प्रिम रोजगार के 15 निनों के र्ीिर

एक नचनकत्सा अनधकारी द्वारा जांच की जाएगी। ऐसी जांचों में त्वचा परीक्षर्, ऑनडयोमेनरक परीक्षर्, फु्फुसीय परीक्षर् शानमल होंगे। और नकसी र्ी कमयचारी को

कारखाने में उसके प्रिम रोजगार के 15 निनों के बाि काम करने की अनुमनि नहीं िी जाएगी, जब िक नक उसे नचनकत्सा अनधकारी द्वारा ऐसे रोजगार के नलए उपयुि

प्रमानर्ि न कर निया जाए।

(2) मैंगनीज प्रनिया में काययरि प्रत्येक कमयचारी की प्रत्येक 12 महीनों में कम से कम एक बार एक नचनकत्सा अनधकारी द्वारा पुन: जांच की जाएगी और ऐसी जांच में,

जहाँ र्ी नचनकत्सा अनधकारी उनचि समझे, उप-अनुच्छेि (1) में सर्ी परीक्षर् शानमल होंगे।

(3) नचनकत्सा अनधकारी, नकसी कमयचारी की जाँच के बाि, प्रपत्र-24 में एक स्वास््य प्रमार्पत्र जारी करेगा। की गई जाँच और पुन: जाँच का ररकॉडय प्रमार्पत्र में िजय

नकया जाएगा और प्रमार्पत्र कारखाने के अनधर्ोगी की अनर्रक्षा में रखा जाएगा। उप-अनुच्छेि (1) और (2) के अंिगयि की गई प्रत्येक जाँच का ररकॉडय, नजसमें इन

परीक्षर्ों की प्रकृनि और पररर्ाम शानमल हैं, नचनकत्सा अनधकारी द्वारा प्रपत्र-05 में और एक स्वास््य रनजस्टर में र्ी िजय नकया जाएगा।

(4) स्वास््य प्रमार्पत्र और स्वास््य रनजस्टर को ननरीक्षक-सह-सुनवधाकिाय द्वारा ननरीक्षर् के नलए आसानी से उपलब्ध रखा जाएगा।

(5) यनि नकसी र्ी समय नचनकत्सा अनधकारी की राय में कोई कमयचारी उि प्रनियाओं में इस आधार पर रोजगार के नलए अब उपयुि नहीं है नक इसमें बने रहने से उसके

स्वास््य को नवशेर् खिरा होगा, िो वह अपने ननष्ट्कर्ों को उि प्रमार्पत्र और स्वास््य रनजस्टर में िजय करेगा। उन िस्िावेजों में उनके ननष्ट्कर्ों की प्रनवनष्ट में वह अवनध

र्ी शानमल होनी चानहए नजसके नलए वह मानिे हैं नक उि व्यनि उि प्रनिया में काम करने के नलए अयोग्य है। उसे वैकनल्पक ननयुनि की सुनवधा प्रिान की जाएगी, जब

िक नक वह नचनकत्सा अनधकारी की राय में पूरी िरह से अक्षम न हो। ऐसी नस्िनि में प्रर्ानवि व्यनि का उपयुि रूप से पुनवायस नकया जाएगा।

(6) कोई र्ी व्यनि जो उप-पैराग्राफ (5) में उनल्लनखि अनुसार कायय करने के नलए अयोग्य पाया गया हो, उसे उि प्रनियाओं में पुनिः ननयोनजि या कायय करने की

अनुमनि नहीं िी जाएगी, जब िक नक नचनकत्सा अनधकारी, आगे की जांच के बाि, उसे पुनिः प्रमानर्ि न कर िे नक वह उन प्रनियाओं में ननयोजन के नलए उपयुि है।

14. छूट - यनि नकसी कारखाने के संबंध में, मुख्य ननरीक्षक-सह-सुनवधािािा संिुष्ट है नक असाधारर् पररनस्िनियों या प्रनियाओं की आवृनत्त में कमी या नकसी अन्य

कारर् से, इस अनुसूची के सर्ी या कोई र्ी प्रावधान कारखाने में श्रनमकों की सुरक्षा के नलए आवश्यक नहीं हैं, िो मुख्य ननरीक्षक-सह-सुनवधािािा एक नलनखि प्रमार्

पत्र जारी कर सकिा है, नजसे वह अपने नववेकानुसार नकसी र्ी समय रद्द कर सकिा है, ऐसे कारखाने को ऐसे सर्ी या नकसी र्ी प्रावधान से ऐसी शिों, यनि कोई हों, के

अधीन छूट िे सकिा है, जैसा नक वह उसमें नननियष्ट कर सकिा है।

............................

अनुसूची – XXX

िकडी का काम करने िािी मशीनें

1. पररिाषाएँ: - इस अनुसूची के प्रयोजनों के नलए:-

क) लकडी का काम करने वाली मशीन का अिय है एक गोलाकार आरी, बैंड आरी, प्लाननंग मशीन, चेन मोनटयनसंग मशीन या वनटयकल नस्पंडल मोनल्डंग मशीन, जो लकडी

या कॉकय पर चलिी है।

ख) गोलाकार आरी का अिय है एक बेंच (रैक बेंच सनहि) में काम करने वाली गोलाकार आरी, लेनकन इसमें पेंडुलम या इसी िरह की आरी शानमल नहीं है नजसे काटने

के उद्देश्य से लकडी की ओर घुमाया जािा है।

ग) बैंड आरी का अिय है एक बैंड आरी, नजसका काटने वाला र्ाग ऊध्वायधर निशा में चलिा है, लेनकन इसमें लॉग आरी या बैंड रीसेनवंग मशीन शानमल नहीं है।

घ) प्लाननंग मशीन का अिय है ओवरहैंड प्लाननंग या मोटाई ननधायरर् या िोनों कायों के नलए एक मशीन।

2 रोकने और शुरू करने िािा उपकरण: - प्रत्येक लकडी का काम करने वाली मशीन पर एक कुशल रोकने और शुरू करने वाला उपकरर् प्रिान नकया जाएगा। इस

[PART IV

DELHI GAZETTE : EXTRAORDINARY

145

उपकरर् का ननयंत्रर् ऐसी नस्िनि में होगा नक मशीन के प्रर्ारी व्यनि द्वारा इसे आसानी और सुगमिा से संचानलि नकया जा सके।

3 मशीन के आसपास का स्र्थान: - प्रत्येक चलिी हुई लकडी की मशीन के आसपास का स्िान बाधाओं से मुि रखा जाएगा।

4 फशग:-

प्रत्येक लकडी की मशीन के आसपास का फशय अच्छी और समिल नस्िनि में रखा जाएगा, और उसे नफसलन नहीं होने निया जाएगा, और जहाँ िक संर्व हो, उसे नचप्स

या अन्य ढीली सामग्री से मुि रखा जाएगा।

5 प्रभशिण और पयगिेिण:-

(1) नकसी र्ी व्यनि को लकडी की मशीन पर िब िक ननयुि नहीं नकया जाएगा जब िक नक उसे नकसी ऐसे व्यनि के उपयुक्ट्‍ि पययवेक्षर् में पयायप्त प्रनशक्षर् न निया गया

हो, नजसे मशीन के संचालन का पूर्य ज्ञान हो।

(2) नजस व्यनि को लकडी की मशीन चलाने के नलए प्रनशनक्षि नकया जा रहा है, उसे मशीन के सुरनक्षि संचालन को सुनननिि करने के नलए पूरी िरह से और

सावधानीपूवयक ननयमों का पालन करना होगा।

6. र्ोिाकार आरी: - प्रत्येक गोलाकार आरी को ननम्न प्रकार से घेरा जाएगा:-

(क) आरी के पीछे और सीधी रेखा में एक ररनवंग नाइफ होगा, नजसकी सिह नचकनी होगी, मजबूि, कठोर और आसानी से समायोज्य होगा और ननम्ननलनखि शिों का

र्ी पालन करेगा:-

(i) आरी के पास नाइफ का नकनारा एक वृत्त के आकार का होगा, नजसकी नत्रज्या बेंच पर इस्िेमाल की जाने वाली सबसे बडी आरी की नत्रज्या से अनधक नहीं होगी।

(ii) नाइफ को आरी के यिासंर्व करीब रखा जाएगा, उस समय नकए जा रहे कायय की प्रकृनि को ध्यान में रखिे हुए और बेंच टेबल के स्िर पर, नाइफ के सामने के

नकनारे और आरी के िांिों के बीच की िूरी 12 नममी से अनधक नहीं होगी।

(iii) 0.6 मीटर से कम व्यास वाली आरी के नलए, नाइफ बेंच टेबल से आरी के शीर्य से 25 नममी के र्ीिर ऊपर की ओर फैला होगा, और 0.6 मीटर या उससे

अनधक व्यास वाली आरी के नलए, बेंच से ऊपर की ओर फैला होगा। आरी के िांि 12 नममी से अनधक नहीं होंगे।

(ख) आरी का शीर्य एक मजबूि और आसानी से समायोज्य गाडय से ढका होगा, नजसमें बाड से सबसे िूर आरी के नकनारे पर एक ्लैंज होगा। गाडय को इस प्रकार

समायोनजि नकया जाएगा नक उि ्लैंज आरी के िांिों की जडों से नीचे िक फैला हो। गाडय ररनवंग चाकू के शीर्य से आरी के काटने वाले नकनारे पर यिासंर्व नीचे िक

फैला होगा।

(ग) बेंच टेबल के नीचे आरी का नहस्सा आरी के प्रत्येक िरफ धािु या अन्य उपयुि सामग्री की िो प्लेटों द्वारा सुरनक्षि होगा; ऐसी प्लेटें 15 सेमी से अनधक िूरी पर नहीं

होंगी, और आरी के अक्ष से बाहर की ओर कम से कम 0.5 सेमी की िूरी िक फैली होंगी। आरी के िांिों से परे - धािु की प्लेटें, यनि शीर्य वाली नहीं हैं, िो कम से

कम 0.25 सेमी मोटी होंगी। या यनि शीर्य वाली हैं, िो कम से कम 0.125 सेमी मोटी होंगी।

7. पुश भस्टक: - प्रत्येक गोलाकार आरी और प्रत्येक ऊध्वायधर नस्पंडल मोनल्डंग मशीन पर उपयोग के नलए एक पुश नस्टक या अन्य उपयुि उपकरर् उपलब्ध कराया

जाएगा िानक काम अनावश्यक जोनखम के नबना नकया जा सके।

8. बैंड आरी: - प्रत्येक बैंड आरी को ननम्न प्रकार से सुरनक्षि नकया जाएगा:-

• ननचली पुली के िोनों ओर पूरी िरह से शीट या नवस्िाररि धािु या अन्य उपयुि सामग्री से ढका होना चानहए।

• ऊपरी पुली का अगला र्ाग शीट या नवस्िाररि धािु या अन्य उपयुि सामग्री से ढका होना चानहए।

146

DELHI GAZETTE : EXTRAORDINARY

PART IV]

• ब्लेड के सर्ी र्ाग बंि या अन्यिा सुरनक्षि रूप से सुरनक्षि होने चानहए, नसवाय बेंच टेबल और शीर्य गाइड के बीच के ब्लेड के र्ाग के।

9. प्िाभनंर् मशीनें-

(I) एक प्लाननंग मशीन (यांनत्रक रूप से संचानलि प्लाननंग मशीन के अलावा) का उपयोग ओवरहैंड प्लाननंग के नलए िब िक नहीं नकया जाएगा जब िक नक उसमें

बेलनाकार कटर ब्लॉक न लगा हो।

(II) ओवरहैंड प्लाननंग के नलए उपयोग की जाने वाली प्रत्येक प्लाननंग मशीन में एक "ब्राइड" गाडय लगाया जाएगा जो बेंच में कनटंग स्लॉट की पूरी लंबाई और चौडाई

को कवर कर सके और इस प्रकार बनाया जाएगा नक इसे ऊध्वायधर और क्षैनिज िोनों निशाओं में आसानी से समायोनजि नकया जा सके।

(III) मोटाई के नलए उपयोग की जाने वाली प्रत्येक प्लांनटंग मशीन के फीड रोलर ओवरहैंड प्लाननंग और मोटाई के नलए संयुि मशीन को छोडकर, एक कुशल गाडय

लगाया जाएगा।

10. िभटगकि भस्पंडि मोभल्डंर् मशीनें:-

• प्रत्येक वनटयकल नस्पंडल मोनल्डंग मशीन के कटर को नकए जा रहे कायय की प्रकृनि को ध्यान में रखिे हुए सबसे कुशल गाडय द्वारा सुरनक्षि नकया जाएगा।

• वनटयकल नस्पंडल मोनल्डंग पर ढलाई की जा रही लकडी को, यनि संर्व हो िो, ऐसे नजग या होल्डर में रखा जाएगा नजससे काययकिाय के नलए िुघयटना का जोनखम

यिासंर्व कम हो सके।

11. चेन मोभटगभसंर् मशीनें: - प्रत्येक चेन मोनटयनसंग मशीन की चेन में एक गाडय लगा होगा जो कटर को यिासंर्व घेरे रखेगा।

12. र्ाडग का समायोजन और रखरखाि- इस अनुसूची के अंिगयि आवश्यक गाडय और अन्य उपकरर्ों को:-

कुशल नस्िनि में रखा जाएगा। मशीनरी के गनिमान रहने पर उन्हें लगािार अपनी नस्िनि में रखा जाएगा, और इस प्रकार समायोनजि नकया जाएगा नक कायय अनावश्यक

जोनखम के नबना नकया जा सके।

13. छूट:- अनुच्छेि 6, 8, 9 और 10 उस लकडी काटने वाली मशीन पर लागू नहीं होंगे नजसके संबंध में यह सानबि नकया जा सके नक अन्य सुरक्षा उपाय प्रिान

नकए गए हैं, उनका रखरखाव नकया गया है और उनका उपयोग नकया गया है जो मशीन को इस अनुसूची में ननधायररि िरीके से संरनक्षि नकए जाने पर सुरनक्षि बनािे हैं।

14. भचभकत्सा परीिण और अभििेख:-

(1) इस अनुसूची के अंिगयि आने वाली मशीनरी पर काययरि प्रत्येक कमयचारी की उसके प्रिम ननयोजन के 15 निनों के र्ीिर एक नचनकत्सा अनधकारी द्वारा जाँच की

जाएगी। ऐसी जाँच में फु्फुसीय परीक्षर्, इम्युनोग्लोनबन परीक्षर्, ऑनडयोमेरी परीक्षर् आनि शानमल होंगे। नकसी र्ी कमयचारी को कारखाने में उसके प्रिम ननयोजन के

15 निनों के बाि िब िक काम करने की अनुमनि नहीं िी जाएगी जब िक नक उसे नचनकत्सा अनधकारी द्वारा ऐसे ननयोजन के नलए उपयुि प्रमानर्ि न कर निया जाए।

(2) उि प्रनियाओं में काययरि प्रत्येक कमयचारी की प्रत्येक बारह कैलेंडर महीनों में कम से कम एक बार नचनकत्सा अनधकारी द्वारा पुनिः जाँच की जाएगी। ऐसी पुनिः जाँच

में,

जहाँ

र्ी

नचनकत्सा

अनधकारी

उनचि

समझे,

उप-अनुच्छेि

(1)

में

नननियष्ट

परीक्षर्

शानमल

होंगे।

(3) नचनकत्सा अनधकारी, नकसी कमयचारी की जाँच करने के बाि, प्रपत्र-24 में एक स्वास््य प्रमार्पत्र जारी करेगा। की गई जाँच और पुन: जाँच का ररकॉडय प्रमार्पत्र में

िजय नकया जाएगा और प्रमार्पत्र कारखाने के अनधर्ोगी की अनर्रक्षा में रखा जाएगा। उप-अनुच्छेि (1) और (2) के अंिगयि की गई प्रत्येक जाँच का ररकॉडय, नजसमें

परीक्षर्ों की प्रकृनि और पररर्ाम शानमल हैं, नचनकत्सा अनधकारी द्वारा प्रपत्र-25 में एक स्वास््य रनजस्टर में र्ी िजय नकया जाएगा।

(4) स्वास््य प्रमार्पत्र और स्वास््य रनजस्टर को ननरीक्षक-सह-सुनवधाकिाय द्वारा ननरीक्षर् के नलए आसानी से उपलब्ध रखा जाएगा।

(5) यनि नकसी र्ी समय नचनकत्सा अनधकारी की राय में कोई कमयचारी उि प्रनिया में इस आधार पर ननयोजन के नलए अब उपयुि नहीं है नक इस प्रनिया को जारी

रखने से कमयचारी के स्वास््य को नवशेर् खिरा होगा, िो वह अपने ननष्ट्कर्ों को उि प्रमार्पत्र और स्वास््य रनजस्टर में िजय करेगा। इन िस्िावेजों में उनके ननष्ट्कर्ों की

प्रनवनष्ट में वह अवनध र्ी शानमल होनी चानहए नजसके नलए वह मानिे हैं नक उि व्यनि उि प्रनियाओं में काम करने के नलए अयोग्य है। प्रनिया से इस प्रकार ननलंनबि

व्यनि को वैकनल्पक ननयुनि सुनवधाएँ प्रिान की जाएँगी, जब िक नक वह नचनकत्सा अनधकारी की राय में पूरी िरह से अक्षम न हो, ऐसी नस्िनि में प्रर्ानवि व्यनि का

[PART IV

DELHI GAZETTE : EXTRAORDINARY

147

उनचि पुनवायस नकया जाएगा।

(6) कोई र्ी व्यनि जो उप-अनुच्छेि (5) में उनल्लनखि अनुसार काम करने के नलए अयोग्य पाया गया है, उसे उि प्रनियाओं में िब िक पुनिः ननयोनजि या काम करने

की अनुमनि नहीं िी जाएगी, जब िक नक नचनकत्सा अनधकारी, आगे की जांच के बाि, उसे उन प्रनियाओं में रोजगार के नलए पुनिः प्रमानर्ि न कर िे।

15. मशीनरी पर व्यभक्त की भनयुभक्त:-

(1) नकसी र्ी व्यनि को इस अनुसूची में नननियष्ट मशीनरी पर काम करने की अनुमनि नहीं िी जाएगी, जब िक नक वह:-

(क) अठारह वर्य की आयु प्राप्त न कर ले;

(ख) उप-अनुच्छेि (2) के अनुसार प्रनशनक्षि न हो; और

(ग) ऐसे प्रत्येक व्यनि का नाम प्रपत्र-48 में एक रनजस्टर में िजय नकया गया है।

(2) प्रनशक्षर् में प्रत्येक प्रकार की लकडी की मशीनरी और सुरक्षा उपकरर् के संबंध में उपयुि और पयायप्त व्यावहाररक ननिेश शानमल होंगे।

..............................

अनुसूची – XXXI

रबर भमिें

1. मशीनों की स्र्थापना: - रबर या रबर यौनगकों को िोडने, िोडने, नघसने, नमलाने, पररष्ट्कृि करने और गमय करने वाली नमलों को इस प्रकार स्िानपि नकया जाएगा नक

सामने वाले रोल का शीर्य, फशय या कायय स्िर से 85 सेमी से कम न हो।

परन्‍िु यह उपबंनधि है नक मौजूिा संस्िापनाओं में, जहां सामने वाले रोल का शीर्य इस ऊंचाई से नीचे है, एक मजबूि कठोर िूरी वाली पट्टी मशीन के सामने इस िरह से

लगाई जाएगी नक संचालक रोल के ननप िक न पहुंच सके।

2. सुरिा उपकरण: - (1) रबर नमलें ननम्ननलनखि से सुसनज्जि होंगी-

• हॉपर इस प्रकार नननमयि या संरनक्षि नकए गए हों नक संचालक का रोल के ननप के साि नकसी र्ी िरह से संपकय होना असंर्व हो।

• आगे और पीछे िोनों िरफ क्षैनिज-संिुनलि रॉप रॉड या टाइट वायर केबल, नजन्हें धकेलने या खींचने पर िुरंि नबजली काट िी जाएगी और ब्रेक लगा निए जाएंगे या

रोल को पीछे की ओर मोड निया जाएगा।

(2) रबर नमलों पर सुरक्षा नरप रॉड या टाइट वायर केबल, रोल के पूरे र्ाग की पूरी लंबाई िक फैली होंगी और फशय या कायय स्िर से 1.75 मीटर से अनधक ऊपर नहीं

होंगी।

(3) सर्ी रबर नमलों पर सुरक्षा नरप रॉड और टाइट वायर केबल की प्रबंधक या अन्य नजम्मेिार व्यनि की उपनस्िनि में प्रनिनिन जाँच और परीक्षर् नकया जाएगा और

यनि ऐसी जाँच और परीक्षर् से कोई िोर् सामने आिा है, िो नमल का उपयोग िब िक नहीं नकया जाएगा जब िक नक उस िोर् का ननवारर् नहीं हो जािा।

............................

अनुसूची – XXXII

सेंभरफ्यूर्ि मशीनें

1. पररर्ार्ा: - "सेंनर्यूगल मशीनों" में सेंनर्यूगल एक्ट्‍सरेटसय, नवर्ाजक और ड्रायसय शानमल हैं।

2. सेंनर्यूगल मशीन का प्रत्येक र्ाग

148

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(क) अच्छे नडज़ाइन और ननमायर् का और पयायप्त मज़बूि होना चानहए;

(ख) उनचि रखरखाव वाला होना चानहए; और

(ग) नकसी सक्षम व्यनि द्वारा ननयनमि अंिराल पर पूरी िरह से जाँचा जाना चानहए।

3. ड्रम या बास्केट के भिए इंटरिॉभकंर् र्ाडग-

• प्रत्येक सेंनर्यूगल मशीन के नपंजरे के आवरर्, घूमने वाले ड्रम या बास्केट पर एक मज़बूि ढक्ट्कन लगा होना चानहए। नपंजरे और ढक्ट्कन का नडज़ाइन, ननमायर् ऐसा

होना चानहए नक ढक्ट्कन बंि होने पर ड्रम या बास्केट िक पहुँच संर्व न हो।

• प्रत्येक सेंनर्यूगल मशीन में एक कुशल अंिलॉयनकंग उपकरर् लगाया जाएगा जो ड्रम या बास्केट के गनिमान होने पर उप-अनुच्छेि (1) में नननियष्ट ढक्ट्कन को खुलने से

प्रर्ावी रूप से रोकेगा और ढक्ट्कन के खुली नस्िनि में रहने पर ड्रम या बास्केट को गनिमान होने से रोकेगा।

4. ब्रेभकंर् व्यिस्र्था:- प्रत्येक अपकेन्द्री मशीन में एक प्रर्ावी व्यवस्िा लगाई जाएगी जो नबजली कट जाने के बाि ड्रम या बास्केट को यिासंर्व कम समय में नस्िर

अवस्िा में ला सके।

5. संचािन र्भत:- नकसी र्ी अपकेन्द्री मशीन को ननमायिा द्वारा ननधायररि गनि से अनधक गनि पर नहीं चलाया जाएगा, जो बास्केट के अंिर और मशीन आवरर् के

बाहर, िोनों जगह आसानी से निखाई िेने वाले स्िानों पर स्पष्ट रूप से अंनकि होगी।

6. अपिाि:- अनुच्छेि 3 का उप-अनुच्छेि (2), अनुच्छेि 4 और 5 चीनी ननमायर् उद्योग में प्रयुि टॉप लंग मशीनों या इसी प्रकार की मशीनों के मामले में लागू नहीं

होंगे।

......................

अनुसूची – XXXIII

पािर प्रेस

1. अनुप्रयोर्: - यह अनुसूची सर्ी प्रकार के पावर प्रेस पर लागू होगी नजसमें प्रेस ब्रेक र्ी शानमल हैं, नसवाय जब इनका उपयोग गमय धािु पर काम करने के नलए नकया

जािा है।

2. पररिाषा: - इस अनुसूची के प्रयोजन के नलए,-

• "अनुमोनिि" का अिय है मुख्य ननरीक्षक-सह-सुनवधाकिाय द्वारा अनुमोनिि;

• "नस्िर बाड" का अिय है पावर प्रेस के उपकरर्ों के नलए प्रिान की गई बाड, नजसमें कोई गनिशील र्ाग पावर प्रेस के िंत्र से संबि या उस पर ननर्यर नहीं है और इसमें

बंि उपकरर् का वह र्ाग शानमल है, जो एक रक्षक के रूप में कायय करिा है;

• "पावर प्रेस" का अिय है धािु या अन्य उद्योगों में मोनल्डंग, प्रेनसंग, ब्लैंनकंग, रेनजंग, [ड्राइंग और इसी िरह के अन्य उद्देश्यों के नलए उपयोग की जाने वाली मशीन;

• "सुरक्षा उपकरर्" का अिय है पावर प्रेस के उपकरर्ों के नलए प्रिान की गई बाड और कोई अन्य सुरक्षा उपाय।

3. स्टाभटिंर् और स्टॉभपंर् मैकेभनज्म: - स्टानटिंग और स्टॉनपंग मैकेननज्म में एक सुरक्षा स्टॉप लगा होगा िानक उपकरर् बंि करिे समय रैम के प्रेसर के नीचे की ओर न

नगरे।

4. उपकरण और डाई की सुरिा:-

• प्रत्येक प्रेस में एक नस्िर गाडय लगा होगा नजसके नीचे नस्लप प्लेट लगी होगी जो उपकरर् के सामने और सर्ी िरफ को घेरेगा।

• प्रत्येक डाई में एक नस्िर गाडय लगा होगा जो उसके सामने और नकनारों को घेरेगा और एक सुरंग के रूप में पीछे की ओर फैला होगा नजसके माध्यम से िबाया गया

सामान प्रेस के पीछे की ओर नगरेगा।

• उप-अनुच्छेि (1) और (2) में नननियष्ट गाडों का नडज़ाइन, ननमायर् और पारस्पररक नस्िनि ऐसी होगी नक

[PART IV

DELHI GAZETTE : EXTRAORDINARY

149

कमयचारी के हाि या उंगनलयों के खिरे वाले क्षेत्र िक पहुँचने की संर्ावना को रोका जा सके।

• मशीन को डाईगाडय के नीचे एक छोटे नछद्र के माध्यम से फीड नकया जाएगा, लेनकन यनि फीनडंग च्यूट के माध्यम से की जािी है, िो िूसरे या बाि के कायों के नलए

एक बडे नछद्र की अनुमनि िी जा सकिी है।

• उप-अनुच्छेि (1) और (2) में नननहि नकसी र्ी बाि के बावजूि, नस्िर गाडय के स्िान पर एक स्वचानलि या इंटरलॉक्ट्ड गाडय का उपयोग नकया जा सकिा है, लेनकन

जहाँ ऐसे गाडय का उपयोग नकया जािा है, उन्हें कुशल काययशील नस्िनि में बनाए रखा जाएगा और यनि नकसी गाडय में कोई खराबी आिी है, िो नबजली िब िक संचानलि

नहीं की जाएगी जब िक नक िोर्पूर्य गाडय को हटा नहीं निया जािा।

5. पािर प्रेस को उपयोर् हेतु तैयार करने हेतु व्यभक्तयों की भनयुभक्त:-

(1) अनुच्छेि 4 के उप-अनुच्छेि (4) में निए गए प्रावधान के अलावा, कोई र्ी व्यनि पावर प्रेस पर उपकरर्ों को सेट, री-सेट, समायोनजि या परीक्षर् नहीं करेगा या

उस पर कोई सुरक्षा उपकरर् स्िानपि या समायोनजि नहीं करेगा, जो डाई प्रूनवंग के उत्पािन हेिु प्रारंनर्क स्िापना या समायोजन हो, या अनुच्छेि 8 द्वारा अपेनक्षि नकसी

सुरक्षा उपकरर् का ननरीक्षर् और परीक्षर् नहीं करेगा, जब िक नक वह:-

(क) अठारह वर्य की आयु प्राप्त न कर चुका हो;

(ख) उप-अनुच्छेि (2) के अनुसार प्रनशनक्षि न हो; और

(ग) कारखाने के अनधर्ोगी द्वारा पावर प्रेस के वगय या नववरर् या सुरक्षा उपकरर् के वगय या नववरर्, जैसा र्ी मामला हो, के संबंध में कियव्यों को पूरा करने के नलए

ननयुि न नकया गया हो; और ऐसे प्रत्येक व्यनि का नाम प्रपत्र-48 में एक रनजस्टर में िजय नकया जाएगा।

(2) प्रनशक्षर् में प्रत्येक प्रकार के पावर प्रेस और सुरक्षा उपकरर् के संबंध में उपयुि और पयायप्त व्यावहाररक ननिेश शानमल होंगे नजनके संबंध में प्रनशनक्षि नकए जा रहे

व्यनि की ननयुनि प्रस्िानवि है।

6. पािर प्रेस और सुरिा उपकरणों की जाँच और परीिण:

(1) नकसी र्ी पावर प्रेस या सुरक्षा उपकरर् का उपयोग नकसी र्ी कारखाने में पहली बार या नकसी सुरक्षा उपकरर् के मामले में नकसी पावर प्रेस पर पहली बार िब िक

नहीं नकया जाएगा जब िक नक पावर प्रेस के मामले में, कारखाने में या उस पावर प्रेस में स्िापना के बाि, नजसके संबंध में उसका उपयोग नकया जाना है, उसकी पूरी िरह

से जाँच और परीक्षर् न कर नलया गया हो।

(2) नकसी र्ी पावर प्रेस का उपयोग िब िक नहीं नकया जाएगा जब िक नक उसकी पूरी िरह से जाँच और परीक्षर् नकसी सक्षम व्यनि द्वारा बारह महीने की ित्काल

पूवयविी अवनध के र्ीिर न कर नलया गया हो।

(3) नकसी र्ी पावर प्रेस का उपयोग िब िक नहीं नकया जाएगा जब िक नक उस पर लगे प्रत्येक सुरक्षा उपकरर् (नस्िर बाड के अलावा) की उस पावर प्रेस पर नस्िनि

में रहिे हुए छह महीने की ित्काल पूवयविी अवनध के र्ीिर नकसी सक्षम व्यनि द्वारा पूरी िरह से जाँच और परीक्षर् न कर नलया गया हो।

(4) पूवोि प्रावधान के अंिगयि परीक्षर् और जाँच करने वाला सक्षम व्यनि एक परीक्षर् और जाँच ररपोटय िैयार करेगा नजसमें ननम्ननलनखि नववरर् शानमल होंगे और

ऐसी प्रत्येक ररपोटय ननरीक्षर् के नलए

ित्परिापूवयक उपलब्ध रखी जाएगी;

(क) कारखाने के अनधर्ोगी का नाम;

(ख) कारखाने का पिा;

(ग) पावर प्रेस या सुरक्षा उपकरर् की पहचान के नलए पयायप्त पहचान संख्या या नचि, जैसा र्ी मामला हो;

(घ) वह निनि जब पावर प्रेस या सुरक्षा उपकरर् को कारखाने में पहली बार उपयोग में लाया गया िा;

(ङ) उपरोि उप-अनुच्छेि (2) की आवश्यकिाओं के अनुसार की गई प्रत्येक आवनधक गहन जाँच की निनि;

(च) ऐसी गहन जाँचों के िौरान पावर प्रेस या सुरक्षा उपकरर् के सुरनक्षि संचालन को प्रर्ानवि करने वाले नकसी र्ी िोर् का नववरर् और ऐसे िोर्ों को िूर करने के नलए

उठाए गए किम।

150

DELHI GAZETTE : EXTRAORDINARY

PART IV]

7. परीिण और जाँच के माध्यम से प्रकट िोष:-

(1) जहाँ नकसी पावर प्रेस या नकसी सुरक्षा उपकरर् में अनुच्छेि 6 के अंिगयि नकसी परीक्षर् और जाँच द्वारा और परीक्षर् और जाँच करने वाले सक्षम व्यनि की राय में

कोई िोर् प्रकट होिा है, िो:-

(क) उि िोर् श्रनमकों के नलए खिरे का कारर् है और पररर्ामस्वरूप, पावर प्रेस या सुरक्षा उपकरर्, जैसा र्ी मामला हो, का उपयोग िब िक नहीं नकया जाना चानहए

जब िक नक उि िोर् का ननवारर् नहीं हो जािा; या

(ख) उि िोर् श्रनमकों के नलए खिरे का कारर् बन सकिा है और पररर्ामस्वरूप, पावर प्रेस या सुरक्षा उपकरर्, जैसा र्ी मामला हो, एक नननियष्ट अवनध की समानप्त के

बाि उपयोग नहीं नकया जाना चानहए जब िक नक उि िोर् का ननवारर् न कर नलया गया हो, ऐसे िोर् की सूचना, यिाशीघ्र जांच और परीक्षर् के पूरा होने के बाि,

सक्षम व्यनि द्वारा कारखाने के अनधर्ोगी को नलनखि रूप में िी जाएगी और यनि इस उप-अनुच्छेि के खंड (ख) के अंिगयि कोई िोर् आिा है, िो ऐसी अनधसूचना में

वह अवनध शानमल होगी नजसके र्ीिर, सक्षम व्यनि की राय में, िोर् का ननवारर् नकया जाना चानहए।

(2) प्रत्येक मामले में जहाँ इस अनुच्छेि के अंिगयि अनधसूचना अनधसूनचि की गई है, उप-अनुच्छेि के अंिगयि की गई ररपोटय की एक प्रनि, अनुच्छेि 6 के उप-अनुच्छेि

(4) के अंिगयि की गई ररपोटय की एक प्रनि, सक्षम व्यनि द्वारा संबंनधि क्षेत्र के ननरीक्षक-सह-सुनवधाप्रिािा को जांच और परीक्षर् पूरा होने के चौिह निनों के र्ीिर र्ेजी

जाएगी।

(3) जहाँ इस अनुच्छेि के पूवयगामी प्रावधानों के अनुसार अनधर्ोगी को ऐसे नकसी िोर् की सूचना िी जािी है, वहाँ उि िोर् वाले पावर प्रेस या सुरक्षा उपकरर् का

उपयोग नहीं नकया जाएगा;

(क) उप-अनुच्छेि (1) के खंड (क) के अंिगयि आने वाले िोर् की नस्िनि में जब िक उि िोर् का ननवारर् नहीं हो जािा; और

(ख) उप-अनुच्छेि (1) के खंड (ख) के अंिगयि आने वाले िोर् की नस्िनि में जब िक नननियष्ट अवनध की समानप्त के बाि उि िोर् का ननवारर् नहीं हो जािा।

(4) यिाशीघ्र, उप-अनुच्छेि (1) के अंिगयि अनधसूनचि नकसी िोर् के ननवारर् के बाि, अनधर्ोगी द्वारा या उसकी ओर से एक अनर्लेख बनाया जाएगा नजसमें उन

उपायों का उल्लेख होगा नजनके द्वारा और नजस निनि को िोर् का ननवारर् नकया गया िा।

8. सुरिा उपकरणों का भनरीिण और परीिण:

(1) उपकरर्ों को सेट करने, रीसेट करने या समायोजन के बाि नकसी र्ी पावर प्रेस का उपयोग िब िक नहीं नकया जाएगा जब िक नक अनुच्छेि 5 के अंिगयि इस

प्रयोजन के नलए ननयुि या अनधकृि व्यनि ने उि पावर प्रेस पर नस्िि प्रत्येक सुरक्षा उपकरर् का ननरीक्षर् और परीक्षर् न कर नलया हो और उसे िम में प्रमानर्ि न कर

निया हो:

परन्‍िु यह उपबंनधि है नक नकसी र्ी ननरीक्षर्, परीक्षर् और प्रमार्पत्र की आवश्यकिा नहीं होगी, जहाँ उपकरर्ों के नकसी र्ी समायोजन के कारर् पावर प्रेस पर नकसी

र्ी सुरक्षा उपकरर् में कोई पररवियन या व्यवधान उत्पन्न न हुआ हो, और, यनि उपकरर्ों के समायोजन के बाि, सुरक्षा उपकरर्, उि व्यनि की

राय में, कुशल कायय िम में बना रहे।

(2) प्रत्येक पावर प्रेस और उस पर नस्िि प्रत्येक सुरक्षा उपकरर् का, जब वह उि पावर प्रेस पर नस्िि हो, प्रनिनिन एक प्रनशनक्षि व्यनि द्वारा ननरीक्षर् और परीक्षर्

नकया जाएगा।

9. भनरीिण और परीिण के िौरान प्रकट िोष:-

(1) यनि नकसी व्यनि को अनुच्छेि 8 के अंिगयि उसके द्वारा नकए गए नकसी ननरीक्षर् और परीक्षर् के पररर्ामस्वरूप यह प्रिीि होिा है नक कोई आवश्यक सुरक्षा

उपकरर् पावर प्रेस पर उनचि नस्िनि में नहीं है या कोई सुरक्षा उपकरर् जो पावर प्रेस पर नस्िि है, उसकी राय में उपयुि नहीं है, िो वह इसकी सूचना िुरंि प्रबंधक को

िेगा।

(2) उप-अनुच्छेि (3) में निए गए प्रावधान को छोडकर, जहाँ अनुच्छेि 8 के अंिगयि नकसी ननरीक्षर् और परीक्षर् में सुरक्षा उपकरर् में कोई िोर् प्रकट होिा है, ननरीक्षर्

और परीक्षर् करने वाला व्यनि इसकी सूचना िुरंि प्रबंधक को िेगा।

[PART IV

DELHI GAZETTE : EXTRAORDINARY

151

(3) जहाँ सुरक्षा उपकरर् में कोई िोर् अनुच्छेि 7 के अंिगयि नलनखि अनधसूचना का नवर्य है नजसके आधार पर सुरक्षा उपकरर् का उपयोग उि िोर् के ननवारर् के

नबना नननियष्ट अवनध के िौरान जारी रखा जा सकिा है, इस अनुच्छेि के उप-अनुच्छेि (2) की आवश्यकिा उि िोर् पर िब िक लागू नहीं होगी जब िक नक उि अवनध

समाप्त न हो जाए।

10. पािर प्रेस और सुरिा उपकरणों की पहचान:-

पहचान के उद्देश्य से, प्रत्येक पावर प्रेस और उसके नलए उपलब्ध कराए गए प्रत्येक सुरक्षा उपकरर् को स्पष्ट और स्पष्ट रूप से नचनिि नकया जाएगा।

11. ऑपरेटरों को भनिेश िेते समय प्रभशिण:-

नकसी र्ी पावर प्रेस पर काम शुरू करने से पहले ऑपरेटरों को काम करने की सुरनक्षि नवनध के बारे में प्रनशनक्षि और ननिेनशि नकया जाएगा।

12 छूट:-

(1) यनि नकसी कारखाने के संबंध में, कारखानों के मुख्य ननरीक्षक-सह-सुनवधाप्रिािा को यह नवश्वास हो जािा है नक पररनस्िनियों या प्रनियाओं की आवृनत्त में कमी या

नकसी अन्य कारर् से, इस अनुसूची के सर्ी या कोई र्ी प्रावधान नकसी पावर प्रेस या कारखाने में काययरि श्रनमकों की सुरक्षा के नलए आवश्यक नहीं हैं, िो मुख्य ननरीक्षक-

सह-सुनवधाप्रिािा एक नलनखि प्रमार् पत्र द्वारा (नजसे वह अपने नववेकानुसार नकसी र्ी समय रद्द कर सकिा है), ऐसे कारखाने को ऐसे सर्ी या नकसी र्ी प्रावधान से

छूट िे सकिा है, बशिे नक ऐसी कोई शिें हों, जो वह उसमें नननियष्ट कर सकिा है।

(2) जहाँ ऐसी छूट प्रिान की जािी है, वहाँ प्रमार् पत्र की एक सुपाठ्य प्रनि, नजन शिों के अधीन यह प्रिान की गई है, यनि कोई हों, िशायिे हुए, कारखाने में ऐसे स्िान

पर लगाई जाएगी जहाँ इसे ननयोनजि व्यनि आसानी से पढ सकें।

.............................................

अनुसूची – XXXIV

कैंची, भस्िटर और भर्िोभटन मशीनें

1. पररिाषाएँ:- इस अनुसूची के प्रयोजन के नलए:-

(क) "नगलोनटन" का अिय है एक ऐसी मशीन जो सामान्यििः सीधे, बेवल धार वाले ब्लेड से सुसनज्जि होिी है, जो नस्िर प्रनिरोधी नकनारे के नवरुि लंबवि रूप से

संचानलि होिी है और धानत्वक या अधानत्वक या अधानत्वक पिािों को काटने के नलए उपयोग की जािी है;

(ख) "कैंची" या "कैंची मशीन" का अिय है एक ऐसी मशीन जो सामान्यििः सीधे, बेवल धार वाले ब्लेड से सुसनज्जि होिी है, जो प्रनिरोधी नकनारे के नवरुि लंबवि

रूप से संचानलि होिी है, या घूर्यनशील, अनिव्यापी काटने वाले पनहयों से सुसनज्जि होिी है और धािुओं या अधानत्वक पिािों को काटने के नलए उपयोग की जािी है;

और

(ग) "नस्लटर" या "नस्लनटंग मशीन" का अिय है एक ऐसी मशीन जो सामान्यििः वृत्ताकार नडस्क-प्रकार के चाकूओं से सुसनज्जि होिी है, और धािु या अधानत्वक पिािों

को काटने या उन्हें संकरी परट्टयों में काटने के नलए उपयोग की जािी है; इस अनुसूची के प्रयोजन के नलए, इस शब्ि में रोटरी चाकूओं या कनटंग नडस्कों से सुसनज्जि ब्रेड

या अन्य खाद्य पिािय के स्लाइस शानमल हैं।

2 भर्िोभटन और कैंची:-

(1) जहाँ िक संर्व हो, चाकू के सामने पयायप्त मज़बूिी वाला एक अवरोधक धािु गाडय लगाया जाएगा, जो मशीन के फ्रेम से जुडा होगा और इस प्रकार नस्िर नकया

जाएगा नक ऑपरेटर के शरीर का कोई र्ी र्ाग

ऊपर से, नीचे से या अवरोधक गाडय के माध्यम से या नकनारों से अवरोही ब्लेड िक न पहुँच सके:

परन्‍िु, यह उपबंनधि है नक कागज़ छपाई और संबि उद्योगों में उपयोग की जाने वाली मशीनों के मामले में, जहाँ एक नस्िर अवरोधक धािु गाडय, नबछाई जा रही सामग्री

152

DELHI GAZETTE : EXTRAORDINARY

PART IV]

की ऊँचाई और आयिन के कारर् उपयुि न हो, वहाँ उपयुि घूरने वाले उपकरर् उपलब्ध कराए जाएँगे नजनके नलए एक साि निया की आवश्यकिा होिी है ऑपरेटर

के िोनों हािों या एक स्वचानलि उपकरर् के साि, जब ब्लेड के हर बार नीचे उिरने पर ऑपरेटर के िोनों हािों को खिरे के क्षेत्र से हटा निया जाएगा।

(2) ऐसी मशीनों के पीछे, एक झुका हुआ गाडय प्रिान नकया जाएगा नजस पर नस्लट के टुकडे नफसलेंगे और एक सुरनक्षि िूरी पर एकनत्रि हो जाएँगे नजससे पीछे बैठा व्यनि

नीचे उिरिे ब्लेड िक न पहुँच सके।

(3) ननरंिर फीड नरमर को छोडकर, शनि चानलि नगलोनटन कटर, इनसे सुसनज्जि होंगे:-

(क) ऐसे स्टानटिंग उपकरर् नजनके नलए काटने की गनि शुरू करने के नलए िोनों हािों की एक साि निया और चाकू के पूरे स्रोक के िौरान कम से कम एक हाि के

ननयंत्रर् की आवश्यकिा होिी है: या

(ख) एक स्वचानलि गाडय ब्लेड के हर बार नीचे उिरने पर ऑपरेटर के हािों को खिरे के क्षेत्र से हटा िेगा, नजसका उपयोग एक हाि वाले स्टानटिंग उपकरर्ों के साि

संयोजन में नकया जािा है, नजनके नलए काटने की गनि शुरू करने के नलए उपकरर् की िो अलग-अलग गनियों की आवश्यकिा होिी है, और इस प्रकार नडज़ाइन नकए

गए हैं नक चाकू के प्रत्येक पूर्य चि के बाि गैर-प्रारंनर्क नस्िनि में सकारात्मक रूप से वापस आ जाएँ।

(4) जहाँ िो या अनधक कमयचारी यनि िोनों कमी एक ही समय में एक ही शनि-चानलि नगलोनटन कटर पर काययरि हैं, जो िो-हाि ननयंत्रर् से सुसनज्जि है, िो उपकरर्

को इस प्रकार व्यवनस्िि नकया जाएगा नक प्रत्येक कमी को काटने की गनि शुरू करने के नलए सुरक्षा नरप पर एक साि िोनों हािों का उपयोग करना होगा, और काटने

को पूरा करने के नलए कम से कम एक हाि ननयंत्रर् पर लगाना होगा।

(5) ननरंिर नरमर के अलावा, शनि-चानलि नगलोनटन कटर,

ब्रेक या अन्य रोकने वाले िंत्र के अनिररि, एक आपािकालीन उपकरर् से सुसनज्जि होंगे जो मशीन को

ब्रेक के नवफल होने की नस्िनि में, जब स्टानटिंग िंत्र गैर-स्टानटिंग नस्िनि में हो, काम करने से रोकेगा।

3. भस्िभटंर् मशीन:-

(1) धािु और चमडा, कागज़, रबर, कपडा या अन्य अधानत्वक पिािों को काटने वाली मशीनों पर गोलाकार नडस्क प्रकार के चाकू, यनि कायय स्िर पर फशय पर खडे

ऑपरेटरों की पहुँच के र्ीिर हों, िो उन्हें

चाकू के नकनारों को हर समय सामग्री की सिह के यिासंर्व ननकट रखने वाले गाडय से सुसनज्जि नकया जाएगा, और जो या िो:-

(क) सामग्री की मोटाई के अनुसार अपने आप समायोनजि हो जाएँ; या

(ख) नस्िर या मैन्युअल रूप से समायोनजि नकए जा सकें िानक गाडय के ननचले िह और सामग्री के बीच की जगह नकसी र्ी समय 6 नममी (1/4 इंच) से अनधक न हो।

(2) नस्लनटंग मशीनों की मेजों या बेंचों के नीचे ब्लेड के नहस्से गाडय से ढके होंगे।

4. इंडेक्स कटर और िभटगकि पेपर स्िॉटर:- इंडेक्ट्स कटर, और नकिाबों के नसरों से परट्टयाँ काटने वाली अन्य मशीनों, और इसी िरह के अन्य कायों के नलए, नस्िर

गाडय प्रिान नकए जाएँगे, िानक संचालकों की उंगनलयाँ ब्लेड और मेजों के बीच न आ सकें।

5. कॉनगर कटर:- कॉनगर कटर का उपयोर्- कागज़ के नडब्बों के ननमायर् में प्रयुि कॉनयर कटर, ननम्ननलनखि से सुसनज्जि होंगे:-

(क) उपयुि गाडय, जो चाकूओं के सामने मशीनों से जुडा होगा और कायों की दृश्यिा सुनननिि करने के नलए स्लॉट या नछद्रों से युि होगा; या

(ख) श्रनमकों की उंगनलयों की सुरक्षा के नलए समान रूप से कुशल अन्य गाडय।

6. बैंड चाकू:- बैंड चाकूओं पर बैंड व्हील, और ऊध्वायधर मशीनों पर स्लाइनडंग गाइड और टेबल के बीच के काययशील र्ाग को छोडकर ब्लेड के सर्ी र्ाग, या क्षैनिज

मशीनों पर व्हील गाडय के बीच, कम से कम 1 नममी (0.04 इंच) मोटाई वाली शीट धािु या समान मजबूिी वाली अन्य सामग्री के नहंग वाले गाडय से पूरी िरह से बंि

होंगे।

..........................

[PART IV

DELHI GAZETTE : EXTRAORDINARY

153

अनुसूची - XXXV

र्थभमगक द्रि हीटर

1. सर्ी हीटर इस प्रकार नननमयि होंगे नक कुंडनलयों को समय-समय पर सफाई, दृश्य ननरीक्षर् और हाइड्रोनलक परीक्षर् के नलए हटाया जा सके।

2. नबजली गुल होने की नस्िनि में र्ट्ठी को प्रर्ावी ढंग से ठंडा करने के नलए उपयुि व्यवस्िा की जाएगी।

3. र्ट्ठी को पुनिः चालू करने से पहले, इसे प्रर्ावी रूप से शुि नकया जाएगा।

4. हीटर के चालू रहने के िौरान, िापीय द्रव के वेग या प्रवाह को ननमायिाओं द्वारा अनुशंनसि न्यूनिम से कम नहीं होने निया जाएगा।

5. िापीय द्रव को एक बंि पररपि संरचना में प्रसाररि नकया जाएगा नजसमें एक नवस्िार-सह-नडएरेटर टैंक होगा। यह टैंक उस शेड के बाहर नस्िि होगा जहाँ हीटर स्िानपि

है।

6. प्रत्येक हीटर में एक फोटो-रेनज़स्टर संचानलि ऑटोनवजुअल अलामय लगा होगा जो ज्वाला की नवफलिा और स्वचानलि बनयर कट का संकेि िेगा।

7. ऑनडयोनवजुअल अलामय के साि स्टैक िापमान मॉननटर-सह-ननयंत्रक प्रिान नकया जाएगा िानक आउटलेट िापमान नवनशष्ट न्यूनिम से अनधक होने पर ऑपरेटर को

चेिावनी िी जा सके।

8. जहाँ र्ट्ठी पर ननरीक्षर् द्वार उपलब्ध हैं, उन्हें बनयर के साि ही इंटरलॉक नकया जाएगा िानक उन्हें िब िक नहीं खोला जा सके जब िक नक बनयर बंि न हो जाए और

र्ट्ठी पयायप्त रूप से ठंडी न हो जाए।

9. सर्ी हीटरों में ननम्ननलनखि सुरक्षा उपकरर् र्ी उपलब्ध होंगे:-

(i) नवस्िार टैंक में स्िर ननयंत्रर्

(ii) ऊष्ट्मीय द्रव का िापमान ननयंत्रर्;

(iii) हीटर ट्यूबों की आउटलेट लाइन पर अंिर िाब नस्वच; और

(iv) बनयर को ईंधन िेल की आपूनिय के नलए िापमान ननयंत्रर् उपकरर्।

10. अनुच्छेि (9) में नननियष्ट सर्ी उपकरर्ों में बनयर के साि इंटरलॉनकंग व्यवस्िा होगी िानक नकसी पूवय ननधायररि सीमा को पार करने की नस्िनि में, ईंधन और हवा की

आपूनिय स्वचानलि रूप से बंि हो जाए।

11. संचालन के िौरान सर्ी सुरक्षा इंटरलॉक हीटर के ननयंत्रर् पैनल पर एक उपयुि दृश्य-श्रव्य अलामय द्वारा िशायए जाएँगे।

12. प्रत्येक हीटर इकाई में आग बुझाने के नलए एक मानक सहायक उपकरर् के रूप में कम िबाव वाली र्ाप या नाइरोजन के साि स्िानांिरर् की व्यवस्िा प्रिान की

जाएगी।

13. हीटर के नलए नवद्युि पैनल हीटर के पास नस्िि होगा, लेनकन इिना पास नहीं नक िेल के छलकने या ररसाव का खिरा हो।

14. हीटर को अन्य नवननमायर् गनिनवनधयों से अनग्नरोधी सामग्री से अलग स्िान पर रखा जाएगा।

15. नवस्फोट वेंट स्िानपि नकया जाएगा जो सुरनक्षि स्िान पर नवस्फोट को बाहर ननकाल सके।

16. हीटर कॉइल का हर बारह महीने में कम से कम एक बार सक्षम व्यनि द्वारा िबाव परीक्षर् नकया जाएगा। परीक्षर् िबाव ऑपरेनटंग िबाव के िोगुने से कम नहीं होगा।

17. यनि कॉइल की मरम्मि की जािी है, िो उसे उपयोग में लाने से पहले उसका परीक्षर् नकया जाएगा।

154

DELHI GAZETTE : EXTRAORDINARY

PART IV]

18. ऊष्ट्मीय द्रव ननमायिाओं द्वारा नननियष्ट नवननिेशों के अनुरूप होगा और हर िीन महीने की अवनध में कम से कम एक बार सक्षम व्यनि द्वारा उपयुििा के नलए परीक्षर्

नकया जाएगा। इस परीक्षर् में अम्लिा, ननलंनबि पिािय, राख की मात्रा, श्यानिा और फ़्लैश नबंिु का परीक्षर् शानमल होगा।

19. हीटर की आंिररक सिह की सफाई, िानक अंिर की िुियम्य सिह की जाँच हर महीने या आवश्यकिानुसार, कायय नस्िनियों के अनुसार की जा सके। कॉइल को कम

से कम छह महीने की अवनध में एक बार हटाकर अच्छी िरह से साफ नकया जाएगा। बनयर, नोजल, िेल नफल्टर और पंप को उपयोग की अवनध के िौरान सप्ताह में एक

बार साफ नकया जाएगा।

20. भनम्नभिभखत जानकारी िािा एक अिर् रभजस्टर रखा जाएर्ा:-

(क) इंटरलॉक की प्रर्ावशीलिा की पुनष्ट के नलए साप्तानहक जाँच की जाएगी;

(ख) यह पुनष्ट करने के नलए साप्तानहक जाँच की जाएगी नक सर्ी सहायक उपकरर् अच्छी नस्िनि में हैं; और

(ग) ईंधन, िेल का िापमान, िबाव, ऊष्ट्मीय द्रव इनलेट/आउटलेट िबाव और िापमान, ईंधन गैस िापमान के बारे में जानकारी, जो चार घंटे के अंिराल पर िजय की जािी

है।

21. हीटर चालू होने पर हमेशा एक प्रनशनक्षि ऑपरेटर के प्रर्ार में रखा जाएगा।

.........................................

अनुसूची XXXVI

िोभमक अम्ि का भनमागण या

सोभडयम, पोटेभशयम या अमोभनयम के बाइिोमेट का भनमागण या पुनप्रागभप्त

1. पररिाषा:

इस अनुसूची के उद्देश्य -

(क) "िोम प्रनिया" का अिय है िोनमक अम्ल या सोनडयम, पोटेनशयम या अमोननयम के बाइिोमेट का ननमायर् या इन पिािों का उनके ननमायर् के संबंध में कायय-

संचालन, संचलन या अन्य उपचार।

(ख) "कुशल एग्‍जॉस्‍ट ड्रा्ट" का अिय है स्िानीयकृि वेंनटलेशन गैस, वाष्ट्प, धूल या धुएं को हटाने के नलए यांनत्रक या अन्य साधनों द्वारा नकया जािा है िानक उन्हें नकसी

र्ी स्िान की हवा में फैलने से रोका जा सके, जहाँ कायय नकया जा रहा हो। कोई र्ी ड्रा्ट कुशल नहीं माना जाएगा जो उत्पन्न धुएं को उस नबंिु िक हटाने में नवफल रहिा

है जहाँ से ऐसी गैस, वाष्ट्प, धुआं या धूल उत्पन्न होिी है।

(ग) "ननलंबन" का अिय है, प्रमानर्ि करने वाले सजयन द्वारा हस्िाक्षररि स्वास््य रनजस्टर (प्रपत्र संख्या 20) में नलनखि प्रमार् पत्र द्वारा नननियष्ट नकसी र्ी िोम प्रनिया में

रोजगार से ननलंबन, नजसके पास ऐसी नकसी र्ी प्रनिया में काययरि सर्ी व्यनियों के संबंध में ननलंबन की शनि होगी।

2. र्िगिती मभहिाओं और भकशोरों से संबंभधत भनषेध- नकसी र्ी गर्यविी मनहला या नकशोर को नकसी र्ी िोम प्रनिया में ननयोनजि या काम करने की अनुमनि नहीं

िी जाएगी।

3. कुशि भनकास प्रणािी

(1) ननम्ननलनखि िोम प्रनियाएँ कुशल ननकास-ड्रा्ट के उपयोग के नबना नहीं की जाएँगी, अिायि्:-

(क) पीसना;

(ख) छनाई;

(ग) बैच नमश्रर्;

(2) (i) धूल/धुएँ के ननष्ट्कर्यर् या िमन के नलए सर्ी उपकरर्ों की प्रत्येक छह महीने में कम से कम एक बार सक्षम व्यनि द्वारा जाँच और परीक्षर् नकया जाएगा, और

ऐसी जाँच और परीक्षर् द्वारा प्रकट नकसी र्ी िोर् को यिाशीघ्र ठीक नकया जाएगा।

(3) ऐसी जाँच और परीक्षर् का नववरर् युि एक रनजस्टर प्रपत्र संख्या 26(4) में रखा जाएगा

[PART IV

DELHI GAZETTE : EXTRAORDINARY

155

4. कुछ प्रभियाओं का पृर्थक्करण

ननम्ननलनखि िोनमयम प्रनियाएँ, अिायि्:-

(क) कच्चे माल की नपसाई, और

(ख) कच्चे माल की छनाई, ऐसी रीनि से और ऐसी पररनस्िनियों में की जाएँगी नजससे नकसी र्ी प्रनिया से प्रर्ावी पृिक्ट्करर् सुनननिि हो सके।

5. धुिाई सुभिधाएँ

(1) जहाँ अम्लीकरर्, सल्फेट ननक्षेपर् या धुलाई, सांद्रर्, निस्टलीकरर्, अपकेंद्रर् या पैनकंग की जािी है, वहाँ प्रत्येक काययकिाय के स्िान के ननकट ननम्ननलनखि

सुनवधाएँ उपलब्ध कराई जाएँगी -

(क) बहिे पानी में बार-बार हाि-पैर धोने के नलए स्िानपि धुलाई स्िान, और

(ख) सोनडयम बाइसल्फाइट या नकसी अन्य उपयुि अपचायक एजेंट के 10 प्रनिशि घोल के कम से कम 20 औंस रखने वाला एक पात्र।

(2) नीचे िशायए गए पैमाने के अनुसार पयायप्त मात्रा में साबुन और िौनलये के साि, एक साफ-सुिरी, अच्छी िरह से मरम्मि की गई और ढकी हुई धुलाई की व्यवस्िा र्ी

उपलब्ध कराई जाएगी और उसका रखरखाव नकया जाएगा -

प्रत्येक 10 कमयचाररयों के नलए कम से कम एक नल या स्टैंड पाइप होगा और नल या पाइप के बीच

कम से कम 1.2 मीटर की िूरी होगी।

नोट: - इस ननयम के प्रयोजनों के नलए आवश्यक कुल नलों की संख्या की गर्ना करिे समय, खंड 5 (1) (ग) के अंिगयि आवश्यक नल या स्टैंड पाइप शानमल नकए

जाएँगे।

6. धुिाई के भिए अनुमत समय

प्रत्येक र्ोजन से पहले और निन के काम की समानप्त से पहले, िोम प्रनिया में काययरि प्रत्येक व्यनि को ननयनमि र्ोजन के समय के अनिररि कम से कम िस नमनट

धुलाई के नलए निए जाएँगे।

7. फशग

नकसी र्ी गर्यविी मनहला या युवा व्यनि को ऐसे नकसी र्ी कमरे में ननयोनजि या काम करने की अनुमनि नहीं िी जाएगी नजसमें उि प्रनियाएँ की जािी हैं।

(क) सीमेंट या इसी िरह की अन्य सामग्री से बना हो िानक वह नचकना और पानी के नलए अर्ेद्य हो और उपयुि ढाल और जल ननकासी की व्यवस्िा हो;

(ख) अच्छी नस्िनि में रखा जाए और प्रनिनिन साफ नकया जाए।

8. भचभकत्सा अभधकारी द्वारा भचभकत्सा परीिण:

(1) इस अनुसूची के अंिगयि आने वाली प्रनियाओं में काययरि प्रत्येक कमयचारी की उसके प्रिम ननयोजन के 15 निनों के र्ीिर एक नचनकत्सा अनधकारी द्वारा जाँच की

जाएगी। ऐसी जाँच में नचनकत्सा अनधकारी द्वारा आवश्यक परीक्षर् शानमल होंगे। नकसी र्ी कमयचारी को कारखाने में उसके प्रिम ननयोजन के 15 निनों के बाि िब िक

काम करने की अनुमनि नहीं िी जाएगी जब िक नक उसे नचनकत्सा अनधकारी द्वारा ऐसे ननयोजन के नलए योग्य प्रमानर्ि न कर निया जाए।

(2) उि प्रनियाओं में काययरि प्रत्येक कमयचारी की प्रत्येक बारह कैलेंडर महीनों में कम से कम एक बार नचनकत्सा अनधकारी द्वारा पुनिः जाँच की जाएगी। ऐसी पुनिः जाँच

में, जहाँ र्ी नचनकत्सा अनधकारी

उनचि समझे, उप-अनुच्छेि (1) में नननियष्ट परीक्षर् शानमल होंगे।

156

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(3) नचनकत्सा अनधकारी, कमयचारी की जाँच करने के बाि, प्रपत्र-24 में स्वास््य प्रमार् पत्र जारी करेगा। नकए गए परीक्षर् और पुन: परीक्षर्ों का ररकॉडय प्रमार् पत्र में

िजय नकया जाएगा और प्रमार् पत्र कारखाने के अनधर्ोगी की अनर्रक्षा में रखा जाएगा। उप-अनुच्छेि (1) और (2) के अंिगयि नकए गए प्रत्येक परीक्षर् का ररकॉडय,

नजसमें परीक्षर्ों की प्रकृनि और पररर्ाम शानमल हैं, नचनकत्सा अनधकारी द्वारा प्रपत्र-05 में एक स्वास््य रनजस्टर में र्ी िजय नकया जाएगा।

(4) नफटनेस प्रमार्पत्र और स्वास््य रनजस्टर को ननरीक्षक-सह-सुनवधाकिाय द्वारा ननरीक्षर् के नलए आसानी से उपलब्ध रखा जाएगा।

(5) यनि नकसी र्ी समय नचनकत्सा अनधकारी की राय में कोई कमयचारी उि प्रनिया में इस आधार पर रोजगार के नलए अब उपयुि नहीं है नक इस प्रनिया में बने रहने

से कमयचारी के स्वास््य को नवशेर् खिरा होगा, िो वह अपने ननष्ट्कर्ों को उि प्रमार् पत्र और स्वास््य रनजस्टर में िजय करेगा।

(6) कोई र्ी व्यनि जो उप-अनुच्छेि (5) में उनल्लनखि अनुसार कायय करने के नलए अयोग्य पाया गया हो, उसे उि प्रनियाओं में पुनिः ननयोनजि या कायय करने की

अनुमनि नहीं िी जाएगी, जब िक नक नचनकत्सा अनधकारी, आगे की जाँच के बाि, उसे उन प्रनियाओं में ननयोजन के नलए पुनिः प्रमानर्ि न कर िे।

9. सुरिात्मक उपकरण

अनधर्ोगी सर्ी ननयोनजि व्यनियों के उपयोग के नलए ननम्ननलनखि उपकरर् उपलब्ध कराएगा और उनका रखरखाव करेगा –

क. कच्चे माल को पीसने, छानने या नमलाने में, पयायप्त और उपयुि श्वासयंत्र (प्रत्येक व्यनि के नलए अलग से जारी नकए गए) नजनकी नफल्टररंग सामग्री का प्रनिनिन

नवीनीकरर् नकया जाएगा;

ख. र्ूनने की प्रनिया में, उपयुि जूिे;

ग. अम्लीकरर्, ननक्षेपर् सांद्रिा, निस्टलीकरर्, अपकेन्द्रर् या पैनकंग में उपयुि एप्रन और हािों और पैरों के नलए सुरक्षात्मक आवरर्।

अनधर्ोगी द्वारा प्रत्येक निन के कायय के अंि में सर्ी सुरक्षात्मक उपकरर्ों की जाँच और सफाई और आवश्यकिा पडने पर उनकी मरम्मि या नवीनीकरर् की व्यवस्िा की

जाएगी।

10. सुरिात्मक उपकरणों का उपयोर्

िोम प्रनिया में काययरि प्रत्येक व्यनि ननयम 8 के अंिगयि प्रिान नकए गए सुरक्षात्मक उपकरर्ों का उपयोग करेगा।

11. क्िोक रूम

नकसी र्ी िोम प्रनिया में काययरि सर्ी व्यनियों के उपयोग के नलए स्वच्छ और अच्छी नस्िनि में एक क्ट्लोक रूम उपलब्ध कराया जाएगा और उसका रखरखाव नकया

जाएगा –

(क) कायय समय के िौरान सडक पर रखे जाने वाले कपडों के नलए एक क्ट्लोक रूम नजसमें गीले कपडों को सुखाने के नलए पयायप्त व्यवस्िा शानमल है। यह व्यवस्िा नकसी

र्ी मेस रूम से अलग होगी;

(ख) अनुच्छेि 8 के अंिगयि प्रिान नकए गए सुरक्षात्मक कपडों के र्ंडारर् के नलए अलग और उपयुि व्यवस्िा।

12. मेस रूम

र्ोजन के अंिराल के िौरान पररसर में रहने वाले सर्ी व्यनियों के उपयोग के नलए एक उपयुि मेस रूम उपलब्ध कराया जाएगा और उसका रखरखाव नकया जाएगा,

नजसमें प्रनि व्यनि कम से कम 0.9 वगय मीटर का स्िान हो। और इसमें -

क. पयायप्त संख्या में मेज, कुनसयाँ या बेंच हों;

ख. बियन धोने की व्यवस्िा हो;

ग. र्ोजन गमय करने के पयायप्त साधन हों।

र्ोजनालय कक्ष एक नजम्मेिार व्यनि के प्रर्ार में होगा और उसे साफ-सुिरा रखा जाएगा।

[PART IV

DELHI GAZETTE : EXTRAORDINARY

157

13. िोजन, पेय आभि का भनषेध।

नकसी र्ी कमयचारी द्वारा या नकसी र्ी ऐसे कायय-कक्ष में, जहाँ िोम प्रनिया की जािी है, कोई र्ी र्ोजन, पेय, "पान", "सुपारी" या िंबाकू नहीं लाया जाएगा या उसका

सेवन नहीं नकया जाएगा और कोई र्ी व्यनि र्ोजन या आराम के अंिराल के िौरान ऐसे नकसी र्ी कमरे में नहीं रहेगा।

14. जिपात्र की बाड िर्ाना

प्रत्येक नस्िर जलपात्र, चाहे वह बियन, कडाही या अन्य संरचना हो, नजसमें कोई खिरनाक सामग्री हो, और जो इस प्रकार ढका न हो नक ननयोनजि व्यनि के शरीर के

नकसी र्ी र्ाग के आकनस्मक रूप से डूबने के सर्ी उनचि जोनखम को समाप्त कर सके, ननम्नानुसार बाड लगाई जाएगी:-

(क) प्रत्येक ऐसे जलपात्र को, जब िक नक उसका नकनारा कम से कम 91.4 सेंटीमीटर न हो, आस-पास की जमीन या प्लेटफॉमय से कम से कम 91.4 सेंटीमीटर की

ऊँचाई िक सुरनक्षि रूप से बाड लगाई जाएगी;

(ख) ऐसे नकसी र्ी जलयान के आर-पार या अंिर कोई िख्िा या गैंग-वे नहीं रखा जाएगा, जब िक नक ऐसा िख्िा या गैंग-वे -

(i) कम से कम 45.7 सेंटीमीटर चौडा न हो, या

(ii) िोनों िरफ, ऊपरी और ननचली रेनलंग द्वारा 91 सेंटीमीटर की ऊँचाई िक या अन्य समान रूप से

कुशल साधनों द्वारा सुरनक्षि रूप से बाड लगाई गई हो;

(ग) यनि ऐसे कोई िो बियन एक-िूसरे के पास हों और उनके बीच का स्िान नकसी र्ी आसपास के ईंट-कायय या अन्य कायय से मुि हो, या िो –

(i) चौडाई में 45.7 सेंटीमीटर से कम हो, या 45.7 या

(ii) अनधक सेंटीमीटर चौडा हो, लेनकन िोनों िरफ कम से कम 91.4 सेंटीमीटर की ऊँचाई िक सुरनक्षि रूप से बाड न लगा हो, िो उनके बीच नकसी र्ी प्रकार के

आवागमन को रोकने के नलए सुरनक्षि अवरोध लगाए जाएँगे।

15. चेतािनी सूचनाएँ

मुख्य ननरीक्षक-सह-सुनवधाप्रिािा द्वारा नननियष्ट प्रपत्र में एक चेिावनी सूचना और ननयोनजि अनधकांश श्रनमकों की र्ार्ा में मुनद्रि, कारखाने में एक प्रमुख स्िान पर नचपकाई

जाएगी जहाँ इसे श्रनमकों द्वारा आसानी से और सुनवधाजनक रूप से पढा जा सके।

16. छूट

यनि नकसी कारखाने के संबंध में मुख्य ननरीक्षक-सह-सुनवधाप्रिािा इस बाि से संिुष्ट है नक असाधारर् पररनस्िनियों या प्रनिया की अननयनमििा, या नकसी अन्य कारर्

से, इस अनुसूची के सर्ी या कोई र्ी प्रावधान ऐसे कारखाने में काययरि व्यनियों की सुरक्षा के नलए आवश्यक नहीं हैं, िो वह नलनखि रूप में ऐसे कारखाने को ऐसे

प्रमार्पत्र में नननियष्ट सर्ी या नकसी र्ी प्रावधान से छूट िे सकिा है, ऐसी शिों पर जो वह उसमें नननियष्ट करे। ऐसा प्रमार्पत्र मुख्य ननरीक्षक-सह-सुनवधाप्रिािा द्वारा नकसी

र्ी समय नबना कोई कारर् बिाए रद्द नकया जा सकिा है।

अनुसूची XXXVII

एिपीजी/एभसभटिीन/आर्गन के उपयोर् से िेभल्डंर्/काटने का कायग

1. प्रयोज्यता:

यह अनुसूची द्रवीकृि पेरोनलयम गैस या एनसनटलीन गैस या आगयन आनि के उपयोग से सामग्री की वेनल्डंग/काटने; ऑक्ट्सीजन गैस के साि जंक्ट्शन; आनि सर्ी कायों पर

लागू होगी।

2. उपकरण:

(1) गैस नसलेंडर, चाहे र्रे हों या खाली, उन कमरों में संग्रनहि नहीं नकए जाएँगे जहाँ वेनल्डंग या काटने का कायय नकया जा रहा हो।

158

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(2) द्रवीकृि गैस नसलेंडर, उपयोग के समय, हमेशा सीधी नस्िनि में रखे जाएँगे और इस प्रकार रखे जाएँगे नक उन्हें नगराया न जा सके।

(3) ज्वलनशील गैसों वाले नकसी र्ी नसलेंडर के ननकट खुली लपटें, बनत्तयाँ, आग जलाना और धूम्रपान करना नननर्ि होगा, नसवाय उनके जो वेनल्डंग, काटने या गमय

करने के नलए उपयोग में हैं।

(4) सर्ी नसलेंडरों को उन सर्ी कायों से कम से कम 10 मीटर की सुरनक्षि िूरी पर संग्रनहि नकया जाएगा नजनसे नपघली हुई धािु की लपटें, नचंगाररयाँ ननकलिी हैं या

अत्यनधक गमी उत्पन्न होिी है।

(5) प्रत्येक गैस नसलेंडर में कुशल मानक प्रकार का िाब ननयामक लगाया जाएगा और गैस का प्रनिवाह िूसरे नॉन-ररटनय प्रकार के वाल्व द्वारा प्रनिबंनधि नकया जाएगा।

(6) सर्ी वेनल्डंग/कनटंग टॉचय मानक प्रकार के होंगे नजनमें नॉन-ररटनय वाल्व लगा होना चानहए।

(7) वेनल्डंग/कनटंग स्िल के पास और गैस नसलेंडर र्ंडारर् के पास उपयुि प्रकार के अनग्नशामक यंत्र उपलब्ध कराए जाने चानहए।

(8) गैस नसलेंडरों से ननकलने वाली पाइप लाइनों को प्रत्येक गैस की पहचान के नलए नवनशष्ट रंगों से रंगा जाएगा।

3. सामान्य:

(1) ज्वलनशील धूल, गैसों, िेल या वाष्ट्प के नवस्फोटक क्षेत्रों में वेनल्डंग और कनटंग कायय नननर्ि होगा।

(2) वेनल्डंग/कनटंग कायय, जो उन स्िानों पर नकए जािे हैं जहाँ वेल्डर और उनके सहायकों के अलावा अन्य व्यनि काम कर रहे हों या गुजर रहे हों, उन्हें कम से कम

2.15 मीटर (7 फीट) ऊँची उपयुि नस्िर या पोटेबल स्िीन से घेरा जाएगा।

(3) वेनल्डंग/कनटंग टॉचय, पाइप लाइन, ब्रैकेट, नॉन-ररटनय वाल्व और प्रेशर रेगुलेटर जैसे सर्ी उपकरर्ों की जाँच ऐसे उपकरर्ों की जानकारी रखने वाले नकसी सक्षम

व्यनि द्वारा कम से कम 15 निनों की अवनध में एक बार की जाएगी।

(4) वेनल्डंग/कनटंग प्रनिया उन श्रनमकों द्वारा की जाएगी जो उस कायय में नवशेर् रूप से प्रनशनक्षि हों और आग, बैक-फायर और नवस्फोट के खिरों से पररनचि हों।

(5) उपकरर्ों की जाँच की एक लॉग बुक और वेनल्डंग/कनटंग कायय के नलए प्रनशनक्षि श्रनमकों का एक रनजस्टर ननरीक्षक-सह-सुनवधाकिाय के ननिेशानुसार प्रपत्रों में रखा

जाएगा।

...........................

अनुसूची- क (सिम व्यभक्त)

भनयम 2(र्) िेखें

1. ननयम 33 के उप-ननयम (1) में ननधायररि मुख्य ननरीक्षक-सह-सुनवधा प्रिािा, नकसी र्ी व्यनि को, ऐसे क्षेत्र और ऐसी अवनध के नलए, जो नननियष्ट की जा सकिी

है, "सक्षम व्यनि" के रूप में मान्यिा िे सकिा है, िानक वह खिरनाक मशीनों, उत्तोलक और नल्टों, उत्िापक मशीनों और उत्िापक उपकरर्ों, िाब संयंत्रों, सीनमि

स्िानों, वेंनटलेशन प्रर्ानलयों और नकसी कारखाने या प्रनिष्ठान में नस्िि ऐसी अन्य प्रनियाओं या संयंत्रों और उपकरर्ों का परीक्षर्, परीक्षर् और ननरीक्षर् कर सके, जैसा

नक संनहिा और ननयमों में ननधायररि है, यनि ऐसे व्यनि के पास नीचे िी गई योग्यिाएं, अनुर्व और अन्य आवश्यकिाएं हैं।

परन्‍िु यह उपबंनध्ि है नक, मुख्य ननरीक्षक-सह-सुनवधा प्रिािा योग्यिाओं की आवश्यकिाओं में छूट िे सकिा है (लेनकन ऐसे व्यनि के अधीन सुनवधाओं के संबंध में

आवश्यकिाओं में नहीं) यनि ऐसा व्यनि असाधारर् रूप से अनुर्वी और जानकार है।

2 संनहिा के िहि सक्षम व्यनि के रूप में मान्यिा प्राप्त व्यनि की आयु पैंसठ वर्य से अनधक नहीं होनी चानहए और वह अपेनक्षि परीक्षर्, परीक्षा और ननरीक्षर् करने के

नलए शारीररक और नचनकत्सकीय रूप से स्वस्ि होना चानहए।

[PART IV

DELHI GAZETTE : EXTRAORDINARY

159

ि.सं

उपकरण भजसके भिए

योग्यता मान्यता प्राप्त है

अपेभित योग्यता

इस उद्देश्य के भिए अनुिि

उसके भनयंत्रण में अभधकार िेत्र

1

2

3

4

5

1

इमारिों के नलए नस्िरिा प्रमार्पत्र नसनवल या स्रक्ट्चरल

इंजीननयररंग में नडग्री

या समकक्ष

(i) ननमायर् या परीक्षर् के नडज़ाइन या संरचनाओं

की मरम्मि में कम से कम 7 वर्य का अनुर्व।

(ii) गैर-नवनाशकारी परीक्षर्, नवनर्न्न वियमान

काययप्रर्ाली संनहिाओं और कंपनों एवं प्राकृनिक

बलों के र्वन की नस्िरिा पर प्रर्ाव का ज्ञान, और

(iii) र्वन की संरचना की सुरक्षा के संबंध में एक

नवश्वसनीय ननष्ट्कर्य पर पहुँचने की क्षमिा।

2 “खिरनाक

मशीनें”

इलेनक्ट्रकल

या

मैकेननकल

या

प्रोडक्ट्शन

या

टेक्ट्सटाइल

इंजीननयररंग में नडग्री

या समकक्ष

(i) न्यूनिम 7 वर्य का अनुर्व

इनमें:-

(क) नडज़ाइन, संचालन या रखरखाव, या

(ख) संबंनधि मशीनरी, उनके गाडय,

सुरक्षा उपकरर्ों और उपकरर्ों का परीक्षर्, जाँच

और ननरीक्षर्।

(ii) वह -(क) सुरक्षा उपकरर्ों

और उनके उनचि संचालन से पररनचि होगा।

(ख) िोर्ों और नवफलिा के नकसी अन्य कारर्

की पहचान करने में सक्षम होगा; और

(ग) सुरक्षा उपकरर् और उपकरर् और मशीन

गाडय के उनचि संचालन के संबंध में एक

नवश्वसनीय

ननष्ट्कर्य पर पहुँचने में सक्षम होगा।

माप के नलए गेज, गनि मापने

के नलए उपकरर् और

खिरनाक मशीनों के उपयोग में

सुरक्षा ननधायररि करने के क्षेत्र में

कोई अन्य प्रमार्पत्र या

अनुर्व।

3 नल्ट और

होइस्ट

इलेनक्ट्रकल

या

मैकेननकल

या

प्रोडक्ट्शन

इंजीननयररंग में नडग्री

या इसके समकक्ष

i) नल्टों और उत्तोलक के नडजाइन, ननमायर् या

रखरखाव, या (ख) ननरीक्षर् और परीक्षर्

प्रनियाओं में न्यूनिम 7 वर्य का अनुर्व;

(ii) वह -(क) प्रासंनगक प्रिाओं और परीक्षर्

प्रनियाओं से पररनचि होगा जो वियमान में लागू

हैं।

(ख) उत्तोलक और उत्तोलक की सुरक्षा से

संबंनधि अन्य वैधाननक आवश्यकिाओं से

पररनचि होगा;

(ग) उत्तोलक और उत्तोलक की सुरक्षा के संबंध

में िोर्ों की पहचान करने और एक नवश्वसनीय

ननष्ट्कर्य पर पहुँचने में सक्षम होगा।

4 उठाने वाली

मशीनरी

और उठाने वाले

उपकरर्

मैकेननकल

या इलेनक्ट्रकल

या

उत्पािन

या

धािुकमय

(i) न्यूनिम 7 वर्ों का अनुर्व -

(क) नडज़ाइन, ननमायर् या रखरखाव,

या (ख) उत्िापक मशीनरी, जंजीरों, रनस्सयों

और उत्िापक उपकरर्ों का परीक्षर्, जाँच और

ननरीक्षर्।

र्ार परीक्षर्, िन्यिा परीक्षर्,

िाप उपचार, मापन के नलए

उपकरर्/गैजेट, गेज और अन्य

उपकरर् की सुनवधाएँ, नजनसे

उठाने वाली मशीनरी की

160

DELHI GAZETTE : EXTRAORDINARY

PART IV]

इंजीननयररंग

या इसके

समकक्ष में नडग्री

(ii) वह -(क) प्रासंनगक काययप्रर्ानलयों और

परीक्षर् प्रनियाओं से पररनचि होगा जो

वियमान में लागू हैं।

(ख) फ्रैक्ट्चर यांनत्रकी और ननमायर् सामग्री के धािु

नवज्ञान से पररनचि होगा;

(ग) उत्िापक मशीनरी और

उत्िापक उपकरर्ों के िनाव सहने वाले घटकों

और र्ागों पर लागू िाप उपचार/िनाव ननवारर्

िकनीकों से पररनचि होगा।

(घ) उत्िापक मशीनरी, जंजीरों, रनस्सयों और

उत्िापक उपकरर्ों की सुरक्षा के संबंध में िोर्ों

की पहचान करने और एक नवश्वसनीय ननष्ट्कर्य पर

पहुँचने में सक्षम होगा।

सुरनक्षि कायय नस्िनियों का

ननधायरर् नकया जा सके।

5 िबाव संयंत्र

रासायननक या नवद्युि

या धािुकमय

या यांनत्रक

या उत्पािन

इंजीननयररंग

या इसके समकक्ष में

नडग्री

(i) न्यूनिम 7 वर्ों का अनुर्व -

-(क) िाब संयंत्र के नडजाइन, ननमायर् या

रखरखाव,

या (ख) परीक्षर्, जाँच और

ननरीक्षर् में।

(ii) वह -

(क) िाब वानहकाओं से संबंनधि प्रासंनगक

काययप्रर्ानलयों और परीक्षर् प्रनियाओं से

पररनचि होगा।

(ख) िाब में संचानलि

अप्रज्वनलि िाब वानहकाओं और उपकरर्ों की

सुरक्षा से संबंनधि वैधाननक

आवश्यकिाओं से पररनचि होगा;

(ग) िाब वानहकाओं पर लागू गैर-नवनाशकारी

परीक्षर् िकनीकों से पररनचि होगा।

(घ) िाब संयंत्रों की सुरक्षा के संबंध में

िोर्ों की पहचान करने और

एक नवश्वसनीय ननष्ट्कर्य पर पहुँचने में सक्षम होगा।

हाइड्रोनलक

परीक्षर्,

नवनाशकारी परीक्षर्, माप के

नलए गेज उपकरर्/गैजेट, और

िबाव वानहकाओं के उपयोग में

सुरक्षा का ननधायरर् करने के

नलए कोई अन्य उपकरर् या

गेज।

6 खिरनाक धुएं से

बचाव

रसायन नवज्ञान में

मास्टर नडग्री या

रासायननक

इंजीननयररंग में नडग्री।

(i) पयायवरर्ीय नमूनों के संग्रहर्

और नवश्लेर्र्

ििा ननगरानी

उपकरर्ों के अंशांकन में न्यूनिम 7 वर्य का

अनुर्व;

(ii) उसे -

(क) रसायनों के खिरनाक

गुर्ों और उनके

अनुमेय सीमा मानों से पररनचि होना चानहए।

(ख) पयायवरर्ीय प्रिूर्कों के नमूने लेने और

नवश्लेर्र् की वियमान

िकनीकों से पररनचि होना चानहए।

(ग) िप्त कमय में प्रवेश करने और उसे करने के

संबंध में सुरक्षा के संबंध में एक नवश्वसनीय

ननष्ट्कर्य पर पहुँचने में सक्षम होना चानहए।

(ii) उसे -

मीटर, उपकरर् और यंत्र

नवनधवि

अंशांनकि और प्रमानर्ि होने

के नलए बंि स्िानों में काम

करने में सुरक्षा के परीक्षर् और

प्रमार्न

करने के नलए

प्रमानर्ि।

[PART IV

DELHI GAZETTE : EXTRAORDINARY

161

(क) रसायनों के खिरनाक

गुर्ों और उनके

अनुमेय सीमा मानों से पररनचि होना चानहए।

(ख) पयायवरर्ीय प्रिूर्कों के नमूने लेने और

नवश्लेर्र् की वियमान

िकनीकों से पररनचि होना चानहए।

(ग) िप्त कमय में प्रवेश करने और उसे करने के

संबंध में सुरक्षा के संबंध में एक नवश्वसनीय

ननष्ट्कर्य पर पहुँचने में सक्षम होना चानहए।

7

संवािन

प्रर्ानलयाँ

(i) धािुओं को पीसना या

चमकाना और

उससे संबंनधि

प्रनियाएँ।

(ii) वस्िुओं की सफाई या

नचकनाई,

खुरिरापन

आनि, जेट और धािु के गोले, या

नग्रट, या अन्य

अपघर्यक द्वारा

संपीनडि हवा या धारा के

प्रक्षेपर् द्वारा।

(iii)एस्बेस्टस का संचालन

और

प्रसंस्करर्,

(iv)नवस्कोस

प्रनिया द्वारा

रेयान का

ननमायर्।

(v) ढलाई

कायय।

मैकेननकल

या

प्रोडक्ट्शन

या

इलेनक्ट्रकल

इंजीननयररंग

या

समकक्ष में नडग्री।

(i) वेंनटलेशन प्रर्ाली और धूल, धुएं और वाष्ट्पों

के ननष्ट्कर्यर् और संग्रहर् हेिु प्रयुि प्रर्ानलयों

और अन्य सहायक उपकरर्ों के नडजाइन,

ननमायर्, स्िापना परीक्षर् में न्यूनिम 7 वर्य का

अनुर्व।

(ii) वह वेंनटलेशन और धुएं के ननष्ट्कर्यर् प्रर्ाली

के संबंध में प्रचनलि प्रासंनगक अभ्यास संनहिाओं

और परीक्षर् प्रनियाओं से पररनचि होगा और

प्रर्ाली की प्रर्ावशीलिा के संबंध में एक

नवश्वसनीय ननष्ट्कर्य पर पहुँचने में सक्षम होगा।

वेंनटलेशन नसस्टम के परीक्षर्

हेिु सुनवधाएँ, धूल, वाष्ट्प और

धुएं के ननष्ट्कर्यर् प्रर्ानलयों की

प्रर्ावशीलिा के परीक्षर् हेिु

उपकरर् और गेज, और इन

प्रर्ानलयों की िक्षिा और

पयायप्तिा ननधायररि करने के

नलए आवश्यक कोई अन्य

उपकरर्। उसे एक उपयुि

योग्य िकनीकी व्यनि की

सहायिा प्राप्त होगी जो प्रर्ाली

की पयायप्तिा के बारे में एक

उनचि ननष्ट्कर्य पर पहुँच सके।

(3) मुख्य ननरीक्षक-सह-सुनवधाकिाय, नकसी व्यनि या संस्िा से, जो "सक्षम व्यनि" के रूप में मान्यिा प्राप्त करना चाहिा हो, िमशिः प्रारूप-I या प्रारूप-II के अनुसार

आवेिन प्राप्त होने पर, ऐसे आवेिन को िुरंि पंजीकृि करेगा और आवेिक की योग्यिा और उपलब्ध सुनवधाओं के संबंध में स्वयं संिुष्ट होने के बाि, या िो आवेिक को

"सक्षम व्यनि" के रूप में मान्यिा िेगा और आवेिन प्रानप्त की निनि से साठ निनों की अवनध के र्ीिर प्रारूप-III में ननधायररि योग्यिा प्रमार् पत्र जारी करेगा या आवेिन

को अस्वीकार कर िेगा।

(4) संनहिा के अंिगयि योग्यिा प्रमार् पत्र एक कैलेंडर वर्य की अवनध के नलए जारी नकया जाएगा।

(5) मुख्य ननरीक्षक-सह-सुनवधाकिाय, व्यनि को सुनवाई का अवसर िेने के बाि, योग्यिा प्रमार् पत्र को रद्द कर सकिा है:-

(i) यनि उसके पास यह मानने का कारर् है नक सक्षम व्यनि ने:-

(क) योग्यिा प्रमार् पत्र में ननधायररि नकसी र्ी शिय का उल्लंघन नकया है या;

(ख) परीक्षर्, जाँच और ननरीक्षर् नकया है या संनहिा और ननयमों के उद्देश्य या आशय के नवपरीि कायय नकया है या संनहिा और ननयमों के िहि अपेनक्षि कायय करने में

चूक की है; या

(ii) नलनखि रूप में िजय नकए जाने वाले नकसी अन्य कारर् से।

162

DELHI GAZETTE : EXTRAORDINARY

PART IV]

प्रोफामाग-II

भकसी संस्र्थान को योग्यता प्रमाणपत्र प्रिान करने के भिए आिेिन पत्र

1. संस्िा का नाम और पूरा पिा:

2. संस्िा की नस्िनि (सरकारी, स्वायत्त, सहकारी, कॉपोरेट,

ननजी, आनि नननियष्ट करें):

3. वह उद्देश्य नजसके नलए योग्यिा प्रमार्पत्र मांगा जा रहा है (संनहिा की धारा(धाराओं) नननियष्ट करें):

4. क्ट्या संस्िा को इस या नकसी अन्य कानून के िहि सक्षम व्यनि घोनर्ि नकया गया है। यनि हाँ, िो नववरर् िें:

5. काययरि और योग्यिा एवं अनुर्व रखने वाले व्यनियों का नववरर्:

ि.सं

परीक्षर् इंजीननयर का नाम और

पिनाम

योग्‍यिा

अनुर्व

धारा(एँ) और ननयम नजनके िहि योग्यिा मांगी जािी है

6. संस्‍िाओं का नववरर् (उपयुयि मि 3 से संबंनधि) और उनके रखरखाव और समय-समय पर अंशांकन के नलए की गई व्यवस्िाएँ:

7. कोई अन्य प्रासंनगक जानकारी:

8. घोर्र्ा:

मैं.................एिि्द्वारा,................ की ओर से प्रमानर्ि करिा/करिी ह ँ नक ऊपर निए गए नववरर् मेरी जानकारी के अनुसार सही हैं। मैं यह वचन िेिा/िेिी ह ँ:

क) संस्‍िाओं को अच्छी काययशील नस्िनि में बनाए रखूँगा/रखूँगी, ननमायिा के ननिेशों के अनुसार या राष्ट्रीय मानकों के अनुसार समय-समय पर अंशांनकि करूँगा/करूँगी;

और

ख) मुख्य ननरीक्षक-सह-सुनवधाप्रिािा द्वारा समय-समय पर जारी नकए गए योग्यिा प्रमार्पत्रों और ननिेशों में ननधायररि सर्ी शिों को पूरा करूँगा/करूँगी और उनका पालन

करूँगा/करूँगी।

संस्िा के प्रमुख या उनकी ओर से हस्िाक्षर करने के नलए अनधकृि व्यनियों के हस्िाक्षर।

पिनाम:

निनांक और स्िान

प्रोफामाग-III

भकसी व्यभक्त या संस्र्था को जारी योग्यता प्रमाणपत्र का प्रारूप

मैं, . ……….. व्यावसानयक सुरक्षा, स्वास््य और कायय नस्िनि संनहिा, 2020 की धारा 2 (l) और उसके अंिगयि बनाए गए ननयमों के िहि मुझे प्रित्त शनियों का

प्रयोग करिे हुए, एिि्द्वारा ...............................(व्यनि का नाम), (संगठन का नाम) के परीक्षर् इंजीननयर को ऐसी इमारिों, खिरनाक मशीनरी, नल्टों और

होइस्ट, नलन्टंग मशीनों और नलन्टंग टैकल, प्रेशर प्लांट, सीनमि स्िान, वेंनटलेशन प्रर्ाली और प्रनिया या संयंत्र और उपकरर्, जैसा र्ी मामला हो को उक्ट्‍ि संनहिा

की धाराओं.*...................के अंिगयि………………….. पर नस्िि कारखाने के नलए परीक्षर्, परीक्षा, ननरीक्षर् और प्रमार्न करने के उद्देश्य से सक्षम

व्यनि के रूप में स्वीकार करिा/करिी ह ँ।

*लागू न होने वाले शब्िों को काट िें।

यह प्रमार्पत्र . . . . . . . . . . . . . . . . . . . . . . . . . से . . . . . . . . . . . . . . . . . िक वैध है।

यह प्रमार्पत्र नीचे िी गई शिों के अधीन जारी नकया जािा है:-

(i) परीक्षर्, जाँच और ननरीक्षर् संनहिा और उसके अंिगयि बनाए गए ननयमों के प्रावधानों के अनुसार नकए जाएँगे;

(ii) परीक्षर्, जाँच और ननरीक्षर् सक्षम व्यनि के प्रत्यक्ष पययवेक्षर् में या नकसी सक्षम व्यनि के रूप में मान्यिा प्राप्त संस्िा द्वारा अनधकृि परीक्षर् इंजीननयर द्वारा नकए

[PART IV

DELHI GAZETTE : EXTRAORDINARY

163

जाएँगे;

(iii) नकसी व्यनि/परीक्षर् इंजीननयर के पक्ष में जारी नकया गया योग्यिा प्रमार्पत्र रद्द हो जाएगा यनि वह व्यनि अपने आवेिन में उनल्लनखि संस्िा छोड िेिा है;

(iv) सक्षम व्यनि के रूप में मान्यिा प्राप्त संस्िा मुख्य ननरीक्षक-सह-सुनवधाप्रिािा को परीक्षर्, जाँच और ननरीक्षर् करने के नलए उसके द्वारा अनधकृि व्यनियों या

व्यनियों के नाम, पिनाम और योग्यिाओं से अवगि कराएगी।

निनांक :

स्िान :

मुख्य ननरीक्षक-सह-सुनवधाकिाय के हस्िाक्षर

फार्म-01

[नियम 4(1) देखें]

धारा 3 र्ें निनदमष्ट प्रनिष्ठाि के पंजीकरण के निए आवेदि

18

प्रतिष्ठान का नाम

19

प्रतिष्ठान का पिा

20

प्रतिष्ठान में की जाने वाली मुख्य गतितवति की प्रकृति

21

प्रतिष्ठान का प्रकार

22

श्रतमक पहचान संख्या

23

तनयोक्ता का नाम और पिा

24

तनयोक्ता का ईमेल, मोबाइल नंबर

25

ए

वर्ष के दौरान तकसी भी तदन तनयोतजि तकए जाने वाले कमषचाररयों की अतिकिम संख्या

बी

तपछले बारह महीनों के दौरान तकसी भी तदन कायषरि कमषचाररयों की अतिकिम संख्या थी

26

प्रतिष्ठान में गतितवति शुरू होने की िारीख

27

जुडा हुआ तवद्युि भार (तकलोवाट में)

28

प्रतिष्ठान का गठन (स्वातमत्व/साझेदारी/सीतमि कंपनी/सरकारी तवभाग/स्थानीय प्रातिकरण/सहकारी)

29

क्या वह भवन तजसमें प्रतिष्ठान तस्थि है, स्वयं का/तकराए पर/आबंतटि/आपसी समझौिे से तलया गया है?

30

क्या प्रतिष्ठान अंिर-राज्यीय प्रवासी श्रतमकों को रोजगार दे रहा है या देगा?

31

राष्ट्रीय औद्योतगक वगीकरण कोड

32

ठेकेदार तववरण

a.

ठेकेदार का नाम और पिा

164

DELHI GAZETTE : EXTRAORDINARY

PART IV]

b.

तनयोतजि तकये जाने वाले ठेका श्रतमकों की संख्या

c.

ठेका श्रतमकों के कायष की प्रकृति

33

जमा की गई फीस रातश का तववरण रु.

तदनांतकि

34

तनयोक्ता द्वारा घोर्णा:

(iv) मैं एिद्द्वारा घोर्णा करिा/करिी ह ूँ तक ऊपर तदए गए तववरण मेरी जानकारी और तवश्वास के अनुसार सत्य हैं।

(v)

मैं व्यावसातयक सुरक्षा, स्वास््य और कायष तस्थति संतहिा 2020 और उसके िहि बनाए गए तनयमों के प्राविानों द्वारा पालन करने का वचन

देिा ह ूँ

तनयोक्ता के हस्िाक्षर

फॉर्म-02

[नियर् 4 (3) देखें]

नकसी प्रनिष्ठाि र्ें नियोनजि/नियोनजि होिे वािे अंिर-राज्यीय प्रवानसयों का नववरण

5.

संस्थान का नाम:

6.

प्रतिष्ठान का पिा:

7.

नियोक्ता का नाम और पिा:

8.

अंिर-राज्यीय प्रवासी श्रतमकों का तववरण:

क्र. सं.

अंिरराज्यीय प्रवासी श्रतमक का नाम

तपिा/पति का नाम

स्थायी पिा (गाूँव/िहसील/तजला/राज्य)

आिार संख्या

मोबाइल संख्या

तनयोक्ता के हस्िाक्षर

फॉर्म-03

[नियर् 4(6) देखें]

प्रनिष्ठािों का रनजस्टर

क्रमांक

पंजीकरण संख्या

और तितथ

प्रतिष्ठान का

नाम और पिा

तनयोक्ता का नाम,

पिा, अनुबंि

संख्या और ई-

मेल आईडी

तकसी भी तदन

की जाने वाली

मुख्य गतितवति

की प्रकृति

अतिकिम

श्रतमकों को

तनयोतजि तकया

जाना

प्रारंभ की

संभातवि तितथ

समाति की

तितथ

तिप्पणी

यतद कोई हो

1

2

3

4

5

6

7

8

9

तनयोक्ता के हस्िाक्षर

[PART IV

DELHI GAZETTE : EXTRAORDINARY

165

फॉर्म-04

(नियर् 6 देखें)

पररचािि प्रारंभ/सर्ानि की सूचिा:

1. पंजीकरण संख्या:

2. प्रनिष्ठाि का िाम और पिा:-

3. नियोक्ता का िाम एवं पदिाम (नजसका प्रनिष्ठाि के मामलों पर अंनिम नियंत्रण है)

4. पूरा पिा नजस पर प्रनिष्ठाि से संबंनिि पत्र भेजा जािा है:-

5. प्रनिष्ठाि के कायय की प्रकृनि:-

6. यदद िोटिस कायय प्रारंभ करिे के नलए है िो कायय की अिुमानिि अवनि:-

7. समानि की नथिनि में, समानि की निनि:-

मैं/हम एिद्द्वारा सूनिि करिा/करिी हूँ/करिे हैं दक पंजीकरण संख्या …………………………………………..ददिांक

…………………………………… वाले प्रनिष्ठाि का कायय प्रभावी रूप से ………………………………………………. (ददिांक) से /

………………………….. (ददिांक) पर प्रारम्भ/समाि होिे की संभाविा है।

कायष समाति की तस्थति में:

मैं/हम एिद्द्वारा प्रमातणि करिा/करिी ह ूँ/करिे हैं तक प्रतिष्ठान में कायषरि श्रतमकों को सभी देय रातश का भुगिान कर तदया गया है िथा पररसर को

खिरनाक रसायनों एवं पदाथों के भंडारण से मुक्त रखा गया है।

तनयोक्ता के हस्िाक्षर

फॉर्म-05

[(नियर् 7(4) देखें]

निदकत्सा परीक्षण का टरकॉर्य

क्रमांक

कमयिारी का

िाम

रोजगार की

निनि

आयु

ललंग

िौकरी की

प्रकृनि

निदकत्सा

परीक्षण की

निनि

निदकत्सा

परीक्षण के

पटरणाम

योग्य

निदकत्सक के

हथिाक्षर

नियोक्ता

के

हथिाक्षर

1

2

3

4

5

6

7

8

9

10

तनयोक्ता/प्रबंिक के हस्िाक्षर

166

DELHI GAZETTE : EXTRAORDINARY

PART IV]

फॉर्म-06

(नियर् 8 देखें) नियुनि पत्र

1. कमषचारी का नाम:

2. कमषचारी की आयु

3.

नियुनक्त की चतचि

4. कमषचारी के तपिा का नाम:

5. कमषचारी का आिार नंबर:

6. कमषचारी का यूएएन/ईएसआई नंबर:

7. प्रतिष्ठान का नाम और पिा:

8.

(ए)

पंजीकरण संख्या:

(बी)

श्रनमक पहिाि संख्या:

9.

पद का िाम:

10. कमयिारी की कौशल श्रेणी:

11. मजदूरी (मूल वेिि, महंगाई भत्ता):

12. अन्य भत्ते:

13. उच्च वेिि/पद प्राि करिे के राथिे:

14. निदकत्सा परीक्षण नववरण:

15. कियव्य की प्रकृनि:

16. दकसी भी अन्य जािकारी:

तनयोक्ता/प्रबंिक के हस्िाक्षर

फॉर्म-07

(नियर् 9 देखें)

दुर्मटिा या खिरिाक र्टिा की सूचिा

ईएसआईसी तनयोक्ता कोड संख्या:

1. तनयोक्ता का नाम:

2. उस कायष/पररसर का पिा जहां दुघषटना या खिरनाक घटना घटी:

3. स्थापना की प्रकृति और LIN:

4. शाखा या तवभाग िथा सटीक स्थान जहां दुघषटना या खिरनाक घटना घटी:

5. घायल कमषचारी का तववरण, यतद कोई हो:

(क) नाम एवं आवासीय पिा:

[PART IV

DELHI GAZETTE : EXTRAORDINARY

167

(ख) आयु एवं तलंग:

(ग) व्यवसाय:

(घ) ईएसआईसी संख्या:

6. दुघषटना या खिरनाक घटना की तितथ, तशफ्ट और समय:

7. (क) दुघषटना या खिरनाक घटना के तदन घायल व्यतक्त ने तजस समय काम शुरू तकया:

(ख) क्या दुघषटना या खिरनाक घटना के तदन के तलए उसे पूणष या आंतशक मजदूरी देय है:

8. (क) दुघषटना या खिरनाक घटना का कारण या प्रकृति

(ख) यतद मशीनरी के कारण हुआ हो-

(i) दुघषटना या खिरनाक घटना का कारण बनने वाली मशीन और भाग का नाम बिाइए:

(ii) बिाएं तक क्या दुघषटना या खिरनाक घटना के समय इसे यांतिक शतक्त द्वारा चलाया गया था:

(ग) स्पष्ट रूप से बिाएं तक उस समय घायल व्यतक्त क्या कर रहा था:

9. यतद दुघषटना या खिरनाक घटना तनयोक्ता के पररवहन में यािा करिे समय हुई हो, िो बिाएं तक -

(क) घायल व्यतक्त अपने कायषस्थल को या वहां से यािी के रूप में यािा कर रहा था;

(ख) घायल व्यतक्त अपने तनयोक्ता की स्पष्ट या तनतहि अनुमति से यािा कर रहा था;

(ग) पररवहन तनयोक्ता द्वारा या उसकी ओर से या तकसी अन्य व्यतक्त द्वारा संचातलि तकया जा रहा है, तजसके द्वारा तनयोक्ता के साथ तकए गए प्रबंिों के अनुसरण में इसे

उपलब्ि कराया गया है; और:

(घ) वाहन को सावषजतनक पररवहन सेवा के सामान्य क्रम में संचातलि तकया जा रहा है/नहीं तकया जा रहा है:

10. संक्षेप में बिाएं तक दुघषटना या खिरनाक घटना कैसे घटी:

11. (क) चोट की प्रकृति और सीमा (जैसे, घािक, उंगली का नुकसान, पैर का फ्रैक्चर, जलना, खरोंच के बाद सेतससस, आतद)

12. (क) यतद दुघषटना या खिरनाक घटना घािक नहीं थी, िो बिाएं तक क्या घायल व्यतक्त 48 घंटे से अतिक समय िक तवकलांग रहा था:

13. (क) तचतकत्सक, और्िालय या अस्पिाल तजससे या तजससे घायल व्यतक्त ने उपचार प्राि तकया या प्राि कर रहा है:

मैं प्रमातणि करिा/करिी ह ूँ तक मेरी जानकारी और तवश्वास के अनुसार उपरोक्त तववरण हर दृतष्ट से सही हैं।

तनयोक्ता/प्रबंिक के हस्िाक्षर

ररपोटष भेजने की तितथ:

स्थान:

फॉर्म-08

(नियर् 10 देखें) रोग की सूचिा

8.

प्रनिष्ठाि का नाम

9.

प्रतिष्ठान का पिा

10.

तनयोक्ता का पिा

11.

की जा रही गतितवति की प्रकृति

12.

श्रनमक /कमषचारी का तववरण

168

DELHI GAZETTE : EXTRAORDINARY

PART IV]

a.

नाम

b.

पिा

c.

तलंग

d.

आयु

13.

श्रनमक /कमषचारी का सटीक व्यवसाय

14.

रोग की प्रकृति तजससे श्रतमक/कमषचारी पीतडि है

तनयोक्ता या योग्य निदकत्सक के हस्िाक्षर

फॉर्म-09

(नियर् 27 देखें)

कायम अवनध की सूचिा

2.

प्रततष्ठान का नाम और पता:

पंजीकरण संख्या:

साप्ताहहक

अवकाश/आराम हदवस:

कायष की अवति

तनयोतजि पुरुर्ों की कुल संख्या

तनयोतजि मतहलाओं की कुल

संख्या

कायष की प्रकृति

तटसपणी

तकशोर

वयस्क

तकशोर

वयस्क

1

2

3

4

5

6

7

तनयोक्ता/प्रबंिक के हस्िाक्षर

फॉर्म-10

(नियर्-28 देखें)

प्रनिष्ठाि र्ें कायमरि श्रनर्कों का रनजस्टर, र्जदूरी, ओवरटाइर्, जुर्ामिा,

क्षनि या हानि के निए कटौिी

र्जदूरी, ओवरटाइर्, जुर्ामिा, क्षनि और हानि के निए कटौिी का रनजस्टर

प्रतिष्ठान का नाम:

तनयोक्ता का नाम:

मातलक का नाम:

तनयोक्ता का पैन/टैन:

श्रतमक पहचान संख्या (LIN):

[PART IV

DELHI GAZETTE : EXTRAORDINARY

169

कमषचारी

रतजस्टर

में

क्रमांक

कमषचारी

का नाम

पदनाम

/

तवभाग

मजदूरी भुगिान की अवति

(मातसक/पातक्षक/सािातहक/दैतनक/टुकडा

दर पर)

वेिन

अवति

से-

को-

अवति के

दौरान काम

तकए गए कुल

तदनों की

संख्या

कुल ओवरटाइम

(टुकडा श्रतमकों के

मामले में काम तकए

गए घंटे या

उत्पादन)

मजदूरी की दरें

बुतनयादी

डीए

भत्ता

1

2

3

4

5

6

7

8

9

10

ओवरटाइम कमाई

तजन कायों

और चूकों के

तलए जुमाषना

लगाया गया है

उनकी प्रकृति

और िारीख

लगाए गए

जुमाषने की

रातश

कमषचारी की

उपेक्षा या चूक

के कारण

तनयोक्ता को हुई

क्षति या हातन

वेिन से कटौिी

की रातश

भुगिान की गई

कुल मजदूरी

रातश

भुगिान की

तितथ

उपतस्थति

िारीख

हस्िाक्षर

11

12

13

14

15

16

17

18

19

तनयोक्ता/प्रबंिक के हस्िाक्षर

फार्म -11

[नियर् 28 देखें]

र्स्टर-रोि

प्रनिष्ठाि का िाम और पिा:

पंजीकरण संख्या:

सािातहक अवकाश

कायष प्रारंभ का समय

आराम अवति

कायष पूरा होने का समय

क्रम सं.

नाम

तपिा

का

नाम

कायष

की

प्रकृति

........को समाि होने वाली अवति के तलए

तटसपणी

1

2 3

4 5

तनयोक्ता/प्रबंिक के हस्िाक्षर

(नियर् 29 देखें)

वेिि रनजस्टर के साथ छुट्टी

कमयिारी का िाम

:

वयथक/दकशोर रनजथिर में संख्या

:

शानमल होिे की निनि

:

मजदूरी दर

:

170

DELHI GAZETTE : EXTRAORDINARY

PART IV]

त्यागपत्र/सेवानिवृनत्त /बर्ायथिगी/मृत्यु/आदद की निनि ।

:

कैलेंर्र वर्य के दौराि काम दकए गए ददिों की कुल संख्या;

:

i

जिवरी

:

ii

फ़रवरी

:

iii

मािय

:

iv

अप्रैल

:

v

मई

:

vi

जूि

:

vii

जुलाई

:

viii अगथि

:

ix

नसिम्बर

:

x

अक्िूबर

:

xi

िवंबर

:

xii

ददसंबर

:

7

वर्य के दौराि अर्जयि अवकाश

:

8

नपछले वर्य के अवकाश शेर्

:

9

वर्य के अंि में कुल जमा संख्या

:

10

वर्य के दौराि चलए गए अवकाश

:

11

वर्य के दौराि भुिाए गए अवकाश

:

12

वर्य के अंि में अवकाश शेर्

:

13

टिप्पणी

:

नियोिा/प्रबंधक के हस्िाक्षर

फार्म -13

(नियर् 30 देखें)

दुर्मटिाओं और खिरिाक र्टिाओं का रनजस्टर

प्रतिष्ठान का नाम और पिा:

पंजीकरण संख्या।

दुघषटना या खिरनाक

घटना

की

तितथ/माह/वर्ष

प्रातिकाररयों

को

ररपोटष

की

तितथ/माह/वर्ष

दुघषटना या खिरनाक

घटना का तववरण

घायल/मृि व्यतक्त का

तववरण (यतद कोई हो)

घायल व्यतक्त के

ड्यूटी पर लौटने की

तितथ

कुल मानव-घंटे की हातन

(दुघषटना या खिरनाक

घटना के कारण)

1

2

3

4

5

6

तनयोक्ता/प्रबंिक के हस्िाक्षर

[PART IV

DELHI GAZETTE : EXTRAORDINARY

171

फॉर्म-14

[नियर् 31 देखें]

िोनटस बोर्म का प्रदर्मि

स्थापना का नाम और पिा, कायष के घंटे, मजदूरी अवति, ऐसी मजदूरी के भुगिान की िारीख, तपछले पांच वर्ों के दौरान स्थापना में हुई दुघषटनाओं और

खिरनाक घटनाओं का ब्यौरा, ऐसे स्थापना पर अतिकार रखने वाले तनरीक्षक-सह-सुतविाप्रदािा का नाम और पिा िथा ऐसे श्रतमकों को अवैितनक मजदूरी

के भुगिान की िारीख दशाषने वाला नोतटस अंग्रेजी, तहंदी और अतिकांश श्रतमकों द्वारा समझी जाने वाली स्थानीय भार्ा में।

तनयोक्ता/प्रबंिक के हस्िाक्षर

फॉर्म-15

(नियर् 32 देखें) वानषमक ररटिम

31 तदसंबर को समाि होने वाले वर्ष के तलए,

15. प्रतिष्ठान की पंजीकरण संख्या:

16. प्रनिष्ठाि का नाम:

17. प्रतिष्ठान का पिा:

18. अतिभोगी/तनयोक्ता का नाम

19. प्रबंिक का नाम.

20. प्रनिष्ठाि का प्रकार:

ए. फैक्री [ 2w(i)/2w(ii)/81]

बी. मोटर पररवहन

सी. बीएओसी

डी. अन्य

21. गतितवति की प्रकृति

22. एनआईसी कोड

23. खिरनाक: MAH या गैर-MAH

24. स्वातमत्व

(a)

सावषजतनक क्षेि

(b)

प्राइवेट सेक्टर

(c)

संयुक्त क्षेि

(d)

सहकारी क्षेि

(e)

स्वातमत्व

172

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(f)

साझेदारी

(g)

सरकारी तवभाग/स्थानीय प्रातिकरण

25. क्या यह प्रतिष्ठान मौसमी है?

26. वर्ष में काम तकये गए तदनों की संख्या.

27. (i) वर्ष के दौरान कायष तकये गये मानव तदवसों की संख्या।

तवतशष्ट

पुरुर्

मतहला

कुल

स्थानीय

प्रवासी

स्थानीय

प्रवासी

स्थानीय

प्रवासी

वयस्क

तकशोर

कुल

(vi)

प्रतिदिन तनयोजिि श्रमिकों की औसि संख्या (मानव दिवसों द्वारा ककये गये कायय को कायय

दिवसों से ववभाजिि करके)

तवतशष्ट

पुरुर्

मतहला

कुल

स्थानीय

प्रवासी

स्थानीय

प्रवासी

स्थानीय

प्रवासी

वयस्क

तकशोर

कुल

14 कुल मानव-घंटों की संख्याओवरटाइम सतहि काम तकया लेतकन आराम अंिराल को छोडकर

तवतशष्ट

पुरुर्

मतहला

कुल

स्थानीय

प्रवासी

स्थानीय

प्रवासी

स्थानीय

प्रवासी

वयस्क

तकशोर

18.

श्रतमकों की औसि संख्या प्रति सप्ताह

19.

खिरनाक घोतर्ि प्रतक्रयाओं या संचालन को करने वाले प्रतिष्ठानों के संबंि में तनम्नतलतखि जानकारी प्रस्िुि करें

र्िरिाक प्रदक्रया

प्रनिददि प्रत्येक

व्यनक्तयों की संख्या

का िाम

प्रदक्रया या संिालि

या ऑपरेशि

में ददये गये

निदकत्सकीय जांि

अयोग्य घोनर्ि घोनर्िजारी रर्ा गया

नियोनजि व्यनक्तयों की

[PART IV

DELHI GAZETTE : EXTRAORDINARY

173

(देर्ें व्याख्यात्मक

औसि संख्या (देर्ें

िोि 'जी')

व्याख्यात्मक टिप्पणी 'र्ी')

पुरुर्

मतहला

पुरुर्

मतहला

1

2

3

4

5

6

(i)

(ii)

(iii) आतद.

20.

िारा 14 के िहि खिरनाक घोतर्ि प्रतक्रयाओं या संचालन करने वाले प्रतिष्ठानों के संबंि में, तनम्नतलतखि जानकारी प्रस्िुि करें

र्िरिाक प्रदक्रया का

प्रनिददि प्रत्येक

व्यनक्तयों की संख्या िाम या ऑपरेशि

प्रदक्रया

या संिालि

घोनर्िजारी रर्ा गया

में ददये गये

निदकत्सकीय जांि

अयोग्य घोनर्ि (देर्ें व्याख्यात्मक

नियोनजि व्यनक्तयों की

(िोि 'जी')

औसि संख्या (देर्ें

व्याख्यात्मक टिप्पणी 'र्ी')

पुरुर्

मतहला

पुरुर्

मतहला

1

2

3

4

5

6

(i)

(ii)

(iii) आतद.

174

DELHI GAZETTE : EXTRAORDINARY

PART IV]

वेिि सनहि अवकार्

नवनशष्ट

कुल श्रनमकों की

संख्या

वेिि सनहि अवकाश

के हकदार श्रनमकों की

संख्या

अवकाश प्राि श्रनमकों

की संख्या

बर्ायथि /

मृि/

सेवामुक्त/ सेवा छोड़िे

वाले

श्रनमकों

की

संख्या

श्रनमकों की संख्या

के संबंि में

नजिकों

छुट्टी के बदले में

मजदूरी का भुगिाि

दकया गया

वयस्क

पुरुर् मतहला

तकशोर

पुरुर्

मतहला

रांसजेंडर

सुरक्षा अनधकारी

सुरक्षा अतिकाररयों की संख्या

तनयुक्त सुरक्षा अतिकाररयों की

आवश्यक

संख्या

कल्याण अनधकारी

कल्याण अतिकाररयों की संख्या

तनयुक्त कल्याण अतिकाररयों की

आवश्यक

संख्या

कल्याणकारी सुनवधाएं

आश्रय या तवश्राम कक्ष या भोजन कक्ष

कैंटीन

क्रेच

एम्बुलेंस कक्ष

दुर्मटिाओं

दुघयििा का प्रकार

दुघयििा की संख्या मािव-ददवसों की हानि नथिनि

मािव-ददवसों की हानि

एमएसआईएिसी

चियमों के अंिगयि होिे

वाली दुघयििाओं

[PART IV

DELHI GAZETTE : EXTRAORDINARY

175

की संख्या

में चजसमें श्रनमक

नथिनि में चजसमें श्रनमक कायय पर

कायय पर लौि आया

लौि आया

उसी वर्य के दौराि

उसके अगले वर्य के दौराि

चजसमें दुघयििा

घटिि हुई

नजसमें

दुघयििा घटिि हुई

घािक

गैर घािक

खिरनाक घटना

कुल संख्या

प्रमातणि तकया जािा है तक ऊपर दी गई जानकारी मेरी जानकारी और तवश्वास के अनुसार सही है।

तनयोक्ता/प्रबंिक के हस्िाक्षर

िारीख.......

व्याख्यात्मक नोट :

1.

प्रनिददि नियोनजि श्रनमकों की औसि संख्या की गणिा निम्न प्रकार से की जािी िानहए कायय ददवसों पर उपनथिनि की कुल संख्या (अिायि,

काम दकए गए पुरुर्-ददवस) को वर्य में कायय ददवसों की संख्या से नवभानजि करिा। उपनथिनि की गणिा करिे समय, अथिायी और थिायी दोिों

िरह के कमयिाटरयों की उपनथिनि को नगिा जािा िानहए, और सभी कमयिाटरयों को शानमल दकया जािा िानहए, िाहे वे सीिे नियोनजि हों या

ठेकेदारों के अिीि। अलग-अलग नशफ्िों (जैसे राि और ददि की नशफ्ि) में उपनथिनि को अलग से नगिा जािा िानहए। नजि ददिों प्रनिष्ठाि दकसी भी

कारण से बंद िा, और नजि ददिों नवनिमायण प्रदक्रयाएं िहीं की गईं, उन्हें कायय ददवस िहीं मािा जािा िानहए। दकसी कायय ददवस में आिी नशफ्ि से

कम की आंनशक उपनथिनि को अिदेर्ा दकया जािा िानहए, जबदक ऐसे ददि आिी नशफ्ि या उससे अनिक की उपनथिनि को पूणय उपनथिनि मािा

जािा िानहए।

2.

मौसमी प्रनिष्ठािों के नलए, कायय मौसम और गैर-मौसम के दौराि नियोनजि श्रनमकों की औसि संख्या अलग-अलग दी जािी िानहए। इसी

प्रकार, कायय मौसम और गैर-मौसम के दौराि प्रनि सिाह कायय दकए गए ददिों की संख्या और औसि मािव घंिों की संख्या भी अलग-अलग दी जािी

िानहए।

3.

प्रनि सिाह काम दकए गए घंिों की औसि संख्या का अिय है वर्य के दौराि सभी श्रनमकों द्वारा काम दकए गए कुल वाथिनवक घंिे, नजसमें

नवश्राम अंिराल शानमल िहीं हैं, लेदकि ओवरिाइम कायय शानमल है, नजसे वर्य के दौराि प्रनिष्ठाि में काययरि कुल श्रनमकों की संख्या और 52 सिाहों

के गुणिफल से नवभानजि दकया जािा है। यदद प्रनिष्ठाि िे पूरे वर्य काम िहीं दकया है, िो कारर्ािे में काम दकए गए सिाहों की संख्या को 52 के

आिार पर उपयोग दकया जािा िानहए।

176

DELHI GAZETTE : EXTRAORDINARY

PART IV]

4.

प्रत्येक मृि या घायल व्यनक्त को एक अलग दुघयििा मािा जािा िानहए। यदद एक घििा में छह व्यनक्त घायल या मारे गए हों, िो उसे छह

दुघयििाएं मािा जािा िानहए।

फॉर्म-16

(नियर् 40 और 41 देखें)

ठेकेदार के निए िाइसेंस के अिुदाि, िवीिीकरण के निए आवेदि

(viii) क्या आवेदन तनम्न के तलए है: (क) लाइसेंस प्रदान करना (ख) लाइसेंस का नवीनीकरण (ग) कायष-तवतशष्ट लाइसेंस

(ix) ठेकेदार का नाम और पिा (व्यतक्तयों के मामले में उसके तपिा का नाम सतहि)

(x)

तपिा का नाम

(xi) उस प्रतिष्ठान का तववरण जहां ठेका श्रतमक तनयोतजि तकया जाना है:

a. प्रतिष्ठान का नाम और पिा:

b. प्रतिष्ठान में तकए जाने वाले व्यवसाय, व्यापार, उद्योग, तवतनमाषण या व्यवसाय का प्रकार।

संतहिा के अंिगषि प्रतिष्ठान के लाइसेंस प्रमाणपि की संख्या एवं िारीख।

c.

प्रिान तनयोक्ता का नाम और पिा:

(xii) ठेका श्रतमकों का तववरण:

a. कायष की प्रकृति तजस प्रतिष्ठान में ठेका श्रतमक तनयोतजि है या तनयोतजि तकया जाना है:

b. प्रस्िातवि अनुबंि कायष की अवति (प्रारंभ एवं समाति की प्रस्िातवि तितथ का तववरण दें)

c. प्रतिष्ठान में ठेकेदार के अतिकृि व्यतक्त का नाम और पिा

d. तकसी भी तितथ को प्रतिष्ठान में तनयोतजि तकये जाने के तलए प्रस्िातवि अतिकिम ठेका श्रतमकों की संख्या

e. तनयोतजि तकए जाने वाले अंिर-राज्यीय प्रवासी श्रतमकों की संख्या: तनयम 4(3) में उतल्लतखि फॉमष संख्या 2 में तववरण भरें

(xiii) जमा की गई लाइसेंस फीस की रातश और तववरण:

(xiv) सुरक्षा जमा की रातश और तववरण, यतद कोई हो, या समायोतजि करने का अनुरोि तकया गया हो:

आवेदक-ठेकेदार के हस्िाक्षर

फॉर्म-17

[नियम 40 देखें]

राष्ट्रीय राजधािी क्षेत्र नदल्िी सरकार

ठेका श्रर् िाइसेंनसंग प्रानधकरण का कायामिय

व्यावसानयक सुरक्षा, स्वास््य और कायम नस्थनि संनहिा 2020 के िहि

(ठेकेदार को िाइसेंस)

लाइसेंस संख्या: …………

िारीख: ……….

शुल्क चकिा कर तदया गया: …………..

[PART IV

DELHI GAZETTE : EXTRAORDINARY

177

सुरक्षा जमा.....................

इसके द्वारा लाइसेंस ………………………………………… को प्रदान तकया जािा है।

व्यावसातयक सुरक्षा, स्वास््य और कायष तस्थति संतहिा 2020 की िारा 47(1) के िहि अनुबंि में तनतदष्ट शिों के अिीन।

6.

यह लाइसेंस …………………………………….. का कायष करने के तलए है।

प्रतिष्ठान में मेससष ……………………………………………………………….

7.

प्रतिष्ठान में ठेका श्रतमक के रूप में तनयोतजि कामगारों की संख्या तकसी भी तदन ......... से अतिक नहीं होगी।

8.

यह लाइसेंस लागू रहेगा िक ….......…

9.

लाइसेंस अनुलग्नक (संलग्न) में तनतदष्ट शिों के अिीन प्रदान तकया जािा है।

जगह :

िारीख:

लाइसेंतसंग प्रातिकारी के हस्िाक्षर

प्रपत्र-18

[नियम 41 और 42 देखें]

राष्ट्रीय राजधािी क्षेत्र नदल्िी सरकार

ठेका श्रर् िाइसेंनसंग प्रानधकरण का कायामिय

व्यावसानयक सुरक्षा, स्वास््य और कायम नस्थनि संनहिा 2020 के िहि

(ठेकेदार िाइसेंस का िवीिीकरण/संर्ोधि)

लाइसेंस संख्या: …………

िारीख: ……….

शुल्क चकिा कर तदया गया: …………..

सुरक्षा जमा.....................

178

DELHI GAZETTE : EXTRAORDINARY

PART IV]

ठेकेदार मेससष ………………………… को व्यावसातयक सुरक्षा, स्वास््य और कायष तस्थति संतहिा 2020 की िारा 47(1) के िहि जारी लाइसेंस संख्या

………………………… को तनम्नानुसार नवीनीकृि/संशोतिि तकया जािा है:

1. तकसी भी तदन तनयोतजि तकये जाने वाले अतिकिम …….कमषचाररयों के तलए लाइसेंस को ……..िक नवीनीकृि/संशोतिि तकया गया है।

जगह :

िारीख:

लाइसेंतसंग प्रातिकारी के हस्िाक्षर

प्रपत्र -19

(नियर् 42 देखें)

ठेकेदार के िाइसेंस र्ें संर्ोधि के निए आवेदि

(i)

ठेकेदार का नाम और पिा

(ii)

लाइसेंस संख्या:

(iii)

संशोिन का तववरण:

(ए)

नाम

(बी)

पिा :

(सी)

तनयोतजि/आपूतिष तकए जाने वाले ठेकेदार श्रतमकों की संख्या

(डी)

अंिरराज्यीय प्रवासी श्रतमकों की संख्यातनयोतजि: तनयम 4(3) में उतल्लतखि फॉमष संख्या 2 में तववरण भरें

(ई)

तनयोतजि/आपूतिष तकए जाने वाले ठेकेदार श्रतमकों के कायष की प्रकृति

(iv)

जमा की गई अतिररक्त लाइसेंस शुल्क की रातश:

(v)

अतिररक्त सुरक्षा की रातश:

आवेदक-ठेकेदार के हस्िाक्षर

फॉर्म- 20

[नियर्-49]

ठेका श्रनर्कों के निए अिुभव प्रर्ाण पत्र

संदभष संक्या -……………

िारीख:-

9.

ठेकेदार के लेटर हेड पर होना चातहए;

10.

अतभवादन या घोर्णा “तजस तकसी को भी यह संबंतिि हो”;

[PART IV

DELHI GAZETTE : EXTRAORDINARY

179

11.

ररकाडष के अनुसार कमषचारी का नाम;

12.

रोजगार की अवति (कायषभार ग्रहण करने की तितथ से कायषमुक्त होने की तितथ िक);

13.

पदनाम या पद;

14.

वेिन;

15.

तटसपतणयाूँ; और

16.

ठेकेदार की मुहर और हस्िाक्षर।

फॉमय-21

(नियम 54 देर्ें)

समझौिे का प्रारूप

यह समझौिा ददिांक ................20.............. को

मेससय ................. नजसका कायायलय ................. पर है (एकमात्र थवानमत्व वाली संथिा/भागीदारी अनिनियम, 1932 के िहि पंजीकृि फमय/कंपिी

अनिनियम, 1956 के िहि निगनमि और पंजीकृि कंपिी) (नजसे आगे "निमायिा" कहा जाएगा) प्रिम पक्ष और श्री/श्रीमिी/कुमारी

..................... पुत्र/पुत्री/पत्नी श्री .................. निवास करिे हैं .........

(नजसे आगे "ऑनर्यो नवजुअल श्रनमक" कहा जाएगा) दूसरे पक्ष के बीि हुआ है | शब्द 'निमायिा' और 'ऑनर्यो नवजुअल श्रनमक' में उिके वाटरस,

उत्तरानिकारी, प्रशासक और कािूिी प्रनिनिनि शानमल होंगे:

जबदक निमायिा व्यावसानयक सुरक्षा, थवाथ्य और अन्य कायय नथिनि संनहिा 2020 की िारा 2(ई) में पटरभानर्ि ऑनर्यो वीनर्यो उत्पादि में लगा हुआ

है।

जबदक उक्त निमायिा पूवोक्त दृश्य-श्रव्य निमायण में .................. की हैनसयि से दृश्य-श्रव्य श्रनमक को नियुक्त करिे का इच्छुक है और दृश्य-श्रव्य श्रनमक

इसे थवीकार करिा है:

अब, इसनलए यह समझौिा इस प्रकार दकया जािा है:

21. दोिों पक्ष इस बाि पर सहमि हैं दक इस समझौिे की अवनि इस निनि से लेकर ऑनर्यो नवजुअल उत्पादि के पूरा होिे िक होगी

और यह अवनि लगािार महीिों से अनिक िहीं होगी।

22. ऑनर्यो नवजुअल श्रनमक थिूनर्यो, थिाि या काययथिल पर, जैसा भी मामला हो, अपिी पूवय नियुनक्त की आवश्यकिा के अिीि

ििा अपिी पुनष्ट के बाद, निमायिा या उसके द्वारा नवनिवि नलनर्ि रूप से प्रानिकृि व्यनक्त द्वारा नलनर्ि सूििा के माध्यम से

जब भी आवश्यकिा होगी, अपिे संबंनिि कायय पर समय पर उपनथिि होिे के नलए सहमि है।

23. जैसा दक पूवोक्त है, ऑनर्यो नवजुअल श्रनमकों की सेवाओं पर नविार दकए नबिा, निमायिा भुगिाि करिे के नलए सहमि है और

ऑनर्यो नवजुअल श्रनमक ………. रुपये की रानश प्राि करिे के नलए सहमि है। इस समझौिे पर हथिाक्षर करिे पर (रुपये)

अनिम के रूप में देय

180

DELHI GAZETTE : EXTRAORDINARY

PART IV]

ििा शेर् रुपये……. देय होंगे ………बराबर दकश्िों में |

24. यदद ऑनर्यो नवजुअल उत्पादि नििायटरि अवनि के भीिर पूरा िहीं होिा है और निमायिा को दफल्म को पूरा करिे के नलए ऑनर्यो

नवजुअल श्रनमक की सेवाओं की अभी भी आवश्यकिा होिी है

,निमायिा भुगिाि करिे के नलए सहमि है और ऑनर्यो नवजुअल श्रनमक ऑनर्यो नवजुअल उत्पादि के पूरा होिे िक, ऊपर र्ंर्

3 में बिाए गए िरीके से देय आिुपानिक आिार पर अनिटरक्त पाटरश्रनमक प्राि करिे के नलए सहमि है।

25. यदद दृश्य-श्रव्य श्रनमक का कायय उपयुयक्त र्ंर् 1 और 4 में नििायटरि अवनि से पहले पूरा हो जािा है, िो निमायिा को दृश्य-श्रव्य

श्रनमक के र्ािे का निपिाि करिा होगा और पुिः टरकॉर्र्िंग कायय/दृश्य-श्रव्य निमायण के सेंसर के प्रारंभ होिे से पहले, जो भी

पहले हो, अिुबंि रानश की शेर् रानश का पूणय भुगिाि करिा होगा।

26. निमायिा द्वारा इस बाि पर सहमनि व्यक्त की गई है दक इस समझौिे के प्रयोजिों के नलए,

(f)

एक कायय ददवस का अिय लगािार आठ घंिे से अनिक की अवनि िहीं होगी (आराम और जलपाि के नलए एक घंिे का अंिराल

शानमल है)

(g)

कायय सिाह का अिय सोमवार से शनिवार िक छह ददि का सिाह होगा, नजसमें दोिों ददि सनम्मनलि हैं, ििा दृश्य-श्रव्य

श्रनमक रनववार और सावयजनिक अवकाश के ददि काम करिे के नलए उत्तरदायी िहीं है:

(h)

ऑनर्यो नवजुअल श्रनमक नबिा अंिराल के लगािार पांि घंिे से अनिक काम करिे की अपेक्षा िहीं की जाएगी; और

(i)

ऑनर्यो नवजुअल श्रनमक के थिूनर्यो/थिाि/काययथिल से निकलिे और अगले कॉल के बीि बारह घंिे से कम का समय व्यिीि

िहीं होगा।

27. यदद आवश्यक हो िो ऑनर्यो नवजुअल श्रनमक -

(c)

नथिनि के अिुसार, िैयारी के काम के नलए, नशफ्ि के नििायटरि समय से पहले थिूनर्यो, थिाि या काययथिल पर उपनथिि

होिा होगा, और उस नथिनि में, उसे निमायिा द्वारा अनिटरक्त मजदूरी का भुगिाि दकया जाएगा, ऐसी प्रारंनभक नथिनि में,

भुगिाि की दर रु ….. प्रनि घंिा या उसका भाग देय होगा।

(d)

कायय ददवस के बाद भी एक घंिे के ब्रेक के साि काम करिा जारी रर्ेगा और उस नथिनि में उसे निमायिा द्वारा अनिटरक्त

मजदूरी का भुगिाि दकया जाएगा, भुगिाि की दर रु …................ नवथिाटरि घंिों के दौराि काम के नलए ििा जलपाि, और

पटरवहि सुनविाएं।

28. निमायिा पटरवहि और भोजि की व्यवथिा करेगा या ड्यूिी पर आिे-जािे के नलए यात्रा भत्ता और ड्यूिी के दौराि भोजि भत्ता

देगा, जैसा दक प्रिागि है या निमायिा और दृश्य-श्रव्य कमयिारी के प्रनिनिनि संगठिों के बीि नद्वपक्षीय व्यवथिा द्वारा िय दकया

गया है।

29. निमायिा को सभी यात्रा और आवास व्यय, दकराया, भोजि की लागि का भी भुगिाि

करिा होगा

[PART IV

DELHI GAZETTE : EXTRAORDINARY

181

और ऐसे अन्य भत्ते जो प्रिागि हैं जब ऑनर्यो नवजुअल काययकिाय को बाहरी थिाि पर काम करिे की आवश्यकिा होिी है।

30. निमायिा को ऑनर्यो नवजुअल कमयिारी को उसके रोजगार के दौराि या इस समझौिे के िहि उसके कायय की अवनि के दौराि

हुई दुघयििा से हुई मृत्यु सनहि दकसी भी िोि या क्षनि के नलए बीमा करवािा होगा।

31. जहां निमायिा को ऑनर्यो नवजुअल के उत्पादि को आगे बढािे से रोका जािा है आग, दंगा, प्राकृनिक आपदा, सावयजनिक प्रानिकरण

का आदेश के कारण, या कोई अन्य कारण उसके नियंत्रण से परे: -

(c)

वह हकदार होगा यदद निमायण कायय थिनगि कर ददया जािा है, िो निमायण निलंबि की अवनि के दौराि इस अिुबंि के

संिालि को निलंनबि कर ददया जाएगा। निमायिा, दृश्य-श्रव्य कमयिारी को इस निलंबि की नलनर्ि सूििा देगा और इस

सूििा की निनि िक उसके सभी बकाया का भुगिाि करेगा। दफल्म पर काम दफर से शुरू होिे पर, यह अिुबंि पुिः लागू हो

जाएगा और र्ंर् 1 में नििायटरि अवनि के नलए वैि रहेगा, नजसमें निलंबि की अवनि शानमल िहीं है; या

(d)

यदद उत्पादि पूरी िरह से बंद हो जािा है, िो वह उत्पादि बंद होिे की निनि से ही इस अिुबंि को समाि करिे का हकदार

होगा। निमायिा, ऑनर्यो-नवजुअल कमयिारी को इस समानि की नलनर्ि सूििा देगा और समानि के समय ऑनर्यो-नवजुअल

कमयिारी को देय समथि रानश का भुगिाि करेगा।

12. यदद निमायिा ऑनर्यो नवजुअल काययकिाय के कियव्यों के निष्पादि के संबंि में कदािार या उसके कियव्यों के निष्पादि के प्रनि

अनिच्छा के अलावा अन्य कारणों से इस अिुबंि को इसकी अवनि समाि होिे से पहले समाि करिा िाहिा है, िोइस अिुबंि के अंिगयि

अपेनक्षि सेवाओं के नलए, निमायिा अिुबंि की नििायटरि रानश के शेर् भुगिाि पर ही ऐसा करिे का हकदार होगा। श्रव्य-दृश्य कमी

को ऐसा भुगिाि करिे के बाद ही, निमायिा अपिे थिाि पर दकसी अन्य श्रव्य-दृश्य कमी को नियुक्त करिे का हकदार होगा।

12. निमायिा को ऑनर्यो नवजुअल काययकिाय की ओर से अपिे कियव्यों के निष्पादि के संबंि में कदािार या अिुबंि

के िहि अपेनक्षि सेवा करिे की उसकी अनिच्छा के आिार पर इस अिुबंि को समाि करिे का अनिकार होगा, नजसके

नलए ऑनर्यो नवजुअल काययकिाय को समानि के समय देय रानश का भुगिाि करिा होगा, नजसकी गणिा ऑनर्यो नवजुअल

काययकिाय द्वारा दफल्म में दकए गए कुल कायय और उसके द्वारा दकए गए कायय को ध्याि में रर्िे हुए की जाएगी।इस समझौिे

की समानि की निनि िक पूरा हो िुका है। इसके िहि समानियह र्ंर् िब िक िहीं बिाया जाएगा जब िक दक निमायिा

द्वारा दृश्य-श्रव्य कमी के नवरुद्ध लगाए गए आरोप, निमायिा संगठि और दृश्य-श्रव्य कमी संगठि, नजससे निमायिा और

दृश्य-श्रव्य कमी क्रमशः संबंनिि हों, के समाि संख्या में प्रनिनिनियों वाले एक मंि के समक्ष नसद्ध ि हो जाएूँ। मंि का

निणय दोिों पक्षों पर बाध्यकारी होगा। निमायिा इस अिुबंि के अंिगयि दकसी अन्य दृश्य-श्रव्य कमी को िभी नियुक्त कर

सकिा है जब मंि ऐसी समानि के पक्ष में निणय दे िुका हो और दृश्य-श्रव्य कमी को उसके सभी बकाया का भुगिाि कर

ददया गया हो।

182

DELHI GAZETTE : EXTRAORDINARY

PART IV]

32. इस समझौिे के समय से पहले समाि होिे की नथिनि में, यह निमायिा का नवकल्प होगा दक वह ऑनर्यो नवजुअल

काययकिाय के काम को दफल्म में बिाए रर्े या िहीं और साि ही, यह ऑनर्यो नवजुअल काययकिाय का नवकल्प होगा

दक वह ऑनर्यो नवजुअल प्रोर्क्शि के क्रेनर्ि िाइिल पर अपिा िाम जािे दे या िहीं।

33. निमायिा को ऑनर्यो नवजुअल काययकिाय के व्यनक्तत्व को प्रथिुि करिे के िरीके को िय करिे का अनिकार होगाथक्रीि

पर ददर्िे वाले व्यनक्त के कपड़े, मेकअप और हेयर थिाइल के बारे में ऑनर्यो नवजुअल काययकिाय को पूरी िरह से

और थवेच्छा से निमायिा के निदेशों का पालि करिा होगा, बशिे दक इस संबंि में निमायिा की आवश्यकिाओं को

ऑनर्यो नवजुअल काययकिाय को सूनिि कर ददया गया हो और उसके द्वारा थवीकार कर नलया गया हो।

34. ऑनर्यो नवजुअल काययकिाय इस बाि से सहमि है दक वह अपिी सेवाएं अपिी सवोत्तम क्षमिा के अिुसार उसी

िरीके से प्रदाि करेगा जैसा दक निमायिा या उसके कहिे पर ऑनर्यो नवजुअल प्रोर्क्शि का निदेशक निदेश दे सकिा

है और ऑनर्यो नवजुअल प्रोर्क्शि के निमायण के नलए उिके द्वारा ददए गए सभी उनिि निदेशों का पालि करेगा।

35. ऑनर्यो नवजुअल श्रनमक थिूनर्यो, थिाि या कायय थिल जैसा भी मामला हो, पर सभी नियमों का पालि करेगा।, ।

36. निमायिा ऑनर्यो नवजुअल काययकिाय की नलनर्ि सहमनि के नबिा इस समझौिे का लाभ दकसी अन्य व्यनक्त को िहीं

सौंपेगा या हथिांिटरि िहीं करेगा।

37. इस समझौिे पर कमयिारी भनवष्य निनि और नवनवि प्राविाि अनिनियम, 1952 के प्राविाि लागू होगा।

38. निमायिा ऑनर्यो नवजुअल काययकिाय के कायय का उपयोग ऑनर्यो नवजुअल के अलावा दकसी अन्य ऑनर्यो नवजुअल

निमायण में िहीं करेगा।के िहि उत्पादि

इस समझौिे को, ऑनर्यो नवजुअल काययकिाय की पूवय अिुमनि के नबिा.

पक्षकारों ने ऊपर बिाई गई िारीख, महीने और वर्ष को एक दूसरे की उपतस्थति में िथा गवाहों की उपतस्थति में इस समझौिे पर हस्िाक्षर तकए हैं।

3.

गवाह

तनमाषिा

नाम

पिा

4.

गवाह. ऑतडयो तवजुअल श्रतमक

नाम

पिा

[PART IV

DELHI GAZETTE : EXTRAORDINARY

183

फॉर्म-22

(नियर् 59, 60 और 61 देखें)

नकसी कारखािे को िाइसेंस प्रदाि करिे/िवीिीकरण करिे/संर्ोधि करिे िथा ठेकेदार की नियुनि के निए आवेदि

12. लाइसेंस के तलए आवेदन –

(a) एक कारखाने के रूप में

(b) ठेकेदार की तनयुतक्त के तलए

13.

प्रतिष्ठान का पूरा नाम और डाक पिा

14.

संतहिा के अंिगषि प्रतिष्ठान का पंजीकरण:

15.

उस व्यतक्त का तववरण जो अतिभोगी/प्रमुख तनयोक्ता होगा

(a) नाम

(b) स्थायी पिा

(c) स्थानीय पिा

(d) ईमेल

(e) मोबाइल नंबर

16.

पटरसर या भवि के मानलक का पूरा िाम और पिा (उसके प्रनिशि सनहि)

17.

र्िरिाक पदािों के नववरण के साि मुख्य गनिनवनि की जाएगीसंनहिा की िारा 2(जेर्ए) के अिुसार।

18.

एिआईसी कोर्

19.

(ए)

लाइसेंस की अवनि में नियोनजि दकए जािे वाले श्रनमकों की कुल संख्या

(बी) नपछले कैलेंर्र वर्य के दौराि नियोनजि दकए गए श्रनमकों की कुल संख्या

20.

ठेका श्रनमकों का नववरण:

(a)

कायय की प्रकृनि नजसमें ठेका श्रनमक नियोनजि है या नियोनजि दकया जािा है:

(b)

तकसी भी तदन तनयोतजि तकये जाने वाले ठेका श्रतमकों की अतिकिम संख्या:

(c)

अंिर-राज्यीय प्रवानसयों की संख्या

(d)

प्रत्येक ठेकेदार के अंिगषि प्रत्येक अनुबंि कायष के प्रारंभ की अनुमातनि तितथ:

(e)

प्रत्येक ठेकेदार के अिीन ठेका श्रतमकों के रोजगार की समाति की अनुमातनि तितथ:

21.

शतक्त:

जुडा हुआ या जुडने का प्रस्िाव (तकलोवाट में)

184

DELHI GAZETTE : EXTRAORDINARY

PART IV]

22.

शुल्क का तववरण

क्र.सं.

तवतशष्ट

मािा. िारीख a

कारखाना

c

ठेकेदार की तनयुतक्त

तनयोक्ता/अतिभोगी के हस्िाक्षर

फार्म -23

(नियर् 59, 60 और 61 देखें)

कारखािे के निए िाइसेंस का अिुदाि/िवीिीकरण/संर्ोधि

या

फैक्ट्री और ठेका श्रनर्कों के निए सार्ान्य िाइसेंस

तदल्ली सरकार

व्यावसातयक सुरक्षा, स्वास््य और कायष तस्थति संतहिा 2020 की िारा के अंिगषि मुख्य तनरीक्षक-सह-सुतविाकिाष का कायाषलय

लाइसेंस संख्या:

जारी करने की तितथ:

लाइसेंस श्री.................(अतिभोगी का नाम) को प्रदान तकया जािा है।

प्रतिष्ठान एमएस

पंजीकरण संतहिा की िारा-3 के िहि पंजीकृि

संख्या

नीचे के अनुसार;

C.

व्यावसानयक सुरक्षा, थवाथ्य और कायय नथिनि संनहिा 2020 और उसके अिीि बिाए गए नियमों के अिुसार एक कारर्ािे

के रूप में िलािे के नलए नजसमें नवनिमायण प्रदक्रया

के नलए _______

से अनिक श्रनमकों को नियोनजि िहीं जाएगा और________ एिपी से अनिक की शनक्त प्रयुक्त िहीं की जाएगी ।

यह लाइसेंस ददिांक ________ से _______ िक प्रभावी रहेगा

शुल्क

जमा करिे की निनि.

D.

इस लाइसेंस के साि संलग्न िीिे दी गई शिों के अिीि अिुबंि श्रनमकों की नियुनक्त;

शुल्क .............

जमा करिे की निनि .........

3

ठेकेदार श्रनमक के रूप में नियोनजि दकए जािे वाले श्रनमकों की अनिकिम संख्या

4

गनिनवनि की प्रकृनि नजसके नलए ठेकेदार श्रनमकों को नियोनजि दकया जाएगा

मुख्य निरीक्षक-सह-सुनविाकिाय का िाम और र्ीएससी

[PART IV

DELHI GAZETTE : EXTRAORDINARY

185

फार्म -24

(नियम 65, 72 और 87 देखें)

खिरिाक प्रनिया या खिरिाक संचािि के निए नफटिेस प्रर्ाणपत्र

1. सीटरयल िंबर________________________

7.

मैं प्रमानणि करिा/करिी हूँ दक मैंिे व्यनक्तगि रूप से जांि की है

(व्यनक्त का िामजांि की गई) नजसका

सीटरयल िंबर है

(वयथक

श्रनमक

रनजथिर

में)

जो

कारर्ािे

में___________(र्िरिाक प्रदक्रया/र्िरिाक संिालि) में नियोनजि होिे का इच्छुक है______________________

8.

वह िौकरी के नलए उपयुक्त है

9.

वह आगे की जांि के नलए प्रस्तुत दकया जाए ______ अवनि के बाद

10.

इसिे निम्ननलनर्ि परीक्षण/जांि कराई हैं:

क्र.सं.

परीक्षण/ जांि का िाम

टिप्पणी

11.

निदकत्सा अनिकारी की टिप्पणी:

निदकत्सा अनिकारी का िाम और हथिाक्षर

.

186

DELHI GAZETTE : EXTRAORDINARY

PART IV]

फॉर्म- 25

(नियर् 65, 72 और 87 देखें)

स्वास्थ्य रनिस्टर

फार्म -26

(नियम 65 देखें)

वेंनटिेर्ि/निकास प्रणािी की जांच

8

वेंटिलेशि/निकास प्रणाली का नववरण

9

कििोप

(a)

कििोप की सीटरयल संख्या

(b)

संदूर्क पकड़ा गया.

(c)

वेग कैप्िर करें (निर्दयष्ट लबंदुओं पर).

(d)

कििोप पर समाि आयिि

(e)

कििोप थिैनिक दबाव नर्जाइि वाथिनवक मूल्य

10

कुल दबाव में नगरावि

(a)

जोड़ों पर

(b)

प्रणाली के अन्य लबंदु (निर्दयष्ट दकए जािे हैं)

11

वानहिी में पटरवहि वेग (केवल लबंदुओं पर िूल निर्दयष्ट दकया जािा है)

क्र.

सं.

श्रनमक

का

िाम

वयथक

श्रनमक

रनजथिर

में

सीटरयल

िंबर

ललंग आयु

वियमाि

कायय पर

रोजगार

की

निनि

छोड़िे

या

थिािांिटरि

या सेवामुक्त

की िारीर्

िौकरी

या

व्यव

साय

की

प्रकृनि

निदकत्सा

अनिकारी

द्वारा

निदकत्सा

परीक्षण

की निनि

निदकत्सा

परीक्षण

के

पटरणाम

यदद कायय से

निलंनबि

दकया गया

है, िो

नवथिृि

कारणों के

साि

निलंबि की

अवनि

बिाएं

ड्यूिी पर

लौििे के

नलए

सुिाटरि

दफि

(निदकत्सा

अनिकारी

के हथिाक्षर

के साि)

यदद कमयिारी

को अयोग्यिा

या निलंबि का

प्रमाणपत्र

जारी दकया

गया

निदकत्सा

अनिकारी

के

हथिाक्षर

और ददिांक

1

2

3

4

5

6

7

8

9

10

11

12

13

14

[PART IV

DELHI GAZETTE : EXTRAORDINARY

187

12

वायु सफाई उपकरण.

(a)

प्रयुक्त प्रकार.

(b)

प्रवेश पर वेग.

(c)

प्रवेश पर थिैनिक दबाव.

(d)

निकास पर वेग

(e)

निकास पर थिैनिक दबाव

13

पंर्ा।

(a)

प्रयुक्त प्रकार.

(b)

मात्रा नियंनत्रि.

(c)

थिैनिक दबाव.

(d)

पंर्े के निकास पर दबाव में नगरावि।

14

पंर्े की मोिर

(a)

प्रकार

(b)

गनि और अश्वशनक्त

8. उपरोक्त दकसी भी घिक में परीक्षण के दौराि प्रकि हुए दोर्ों का नववरण, यदद कोई हो।

मैं प्रमानणि करिा/करिी हूँ दक इस ........ददि ........को उपरोक्त वेंटिलेशि/निकास प्रणाली को पूरी िरह से साफ कर ददया गया िा और

(जहाूँ िक इसके निमायण की अिुमनि है) इसे सुलभ बिा ददया गया िा।मैं यह भी प्रमानणि करिा/करिी हूँ दक उक्त निनि को मैंिे उपरोक्त

िूल निष्कर्यण प्रणाली और उसके घिकों की पूरी िरह से जाूँि की है और उपरोक्त मेरी जाूँि की सत्य टरपोिय है।

सक्षम व्यनक्त का िाम और हथिाक्षर

188

DELHI GAZETTE : EXTRAORDINARY

PART IV]

फॉर्म-27

(नियर् 66 देखें)

साइट र्ूल्यांकि सनर्नि को आवेदि का प्रारूप

15 आवेदक का नाम एवं पिा।

16 साइट स्वातमत्व तितथ.

2.1 साइट का राजस्व तववरण जैसे सवेक्षण संख्या, सलॉट संख्या आतद।

2.2. क्या साइट वन के रूप में वगीकृि है और यतद हां, िो क्या भारिीय वन अतितनयम, 1927 की िारा 5 के अंिगषि केन्र सरकार का अनुमोदन तलया

गया है।

2.3. क्या प्रस्िातवि साइट ई.पी. अतितनयम, 1986 की िारा 3 (2) (v) के प्राविानों के अंिगषि आिी है, यतद हां, िो प्रतिबंिों की प्रकृति क्या है।

2.4. स्थानीय प्रातिकारी तजसके अतिकार क्षेि में साइट तस्थि है।

17

साइट योजना।

3.1. साइट सलान तजसमें सीमाओं और कब्जे वाले कुल प्रस्िातवि क्षेि की स्पष्ट पहचान हो और प्रस्िातवि साइट के आसपास तनम्नतलतखि तववरण दशाषए गए हों -

(क) आस-पास ऐतिहातसक स्मारक, यतद कोई हो;

(ख) आस-पास की तवतनमाषण इकाइयों और मानव आवासों, शैक्षतणक और प्रतशक्षण संस्थानों, पेरोल प्रतिष्ठानों, एलपीजी और अन्य खिरनाक पदाथों के भंडारण के नाम

और प्रस्िातवि इकाई से उनकी दूरी;

(ग) आसपास के जल स्रोि (नतदयाूँ, नाले, नहरें, बांि, जल तनस्पंदन संयंि, आतद);

(घ) तनकटिम अस्पिाल, अतग्नशमन केन्र, नागररक सुरक्षा केन्र और पुतलस स्टेशन िथा उनकी दूररयां;

(ई) उच्च िनाव तवद्युि संचरण लाइनें, पानी, िेल, गैस या सीवरेज के तलए पाइप लाइनें, रेलवे लाइनें, सडक, स्टेशन, जेटी और अन्य समान प्रतिष्ठान।

3.2. मृदा की तस्थति और कठोर स्िर प्राि करने की गहराई का तववरण।

3.3. क्षेि का समोच्च मानतचि तजसमें आस-पास की पहातडयाूँ और स्िरों में अंिर दशाषया गया हो।

3.4. कारखाने का सलॉट सलान तजसमें प्रवेश और तनकास तबंदु, अंदर की सडकें, पानी की नातलयां आतद दशाषई गई हों।

18

पररयोजना ररपोटष.

4.1. पररयोजना की मुख्य तवशेर्िाओं का सारांश।

4.2. संगठन की तस्थति (सरकारी, अिष-सरकारी, सावषजतनक या तनजी आतद)

4.3. कारखाने में काम करने वाले संभातवि व्यतक्तयों की अतिकिम संख्या।

4.4. तबजली और पानी की अतिकिम आवश्यकिा और उनकी आपूतिष का स्रोि।

4.5. प्रस्िातवि स्थल पर भवनों और प्रतिष्ठानों का ब्लॉक आरेख।

4.6 प्रस्िातवि आवासीय कॉलोनी, अस्पिाल, स्कूल एवं अन्य अवसंरचनात्मक सुतविाओं का तववरण।

[PART IV

DELHI GAZETTE : EXTRAORDINARY

189

19

प्रस्िातवि तवतनमाषण इकाई/कारखाने की संगठनात्मक संरचना

5.1 संगठनात्मक आरेख - प्रस्िातवि उद्यम का सामान्य रूप में । - स्वास््य, सुरक्षा और पयाषवरण संरक्षण तवभाग िथा उनका पररचालन और िकनीकी तवभागों

से संबंि।

5.2. प्रस्िातवि स्वास््य एवं सुरक्षा नीति।

5.3. अपतशष्ट एवं बतहिःस्राव के उपचार के तलए आवंतटि क्षेि।

5.4. सुरक्षा, स्वास््य और पयाषवरण संरक्षण उपायों पर प्रतिशि पररव्यय।

20

साइट से संबंतिि मौसम संबंिी डेटा.

6.1. तपछले दस वर्ों के दौरान औसि, न्यूनिम और अतिकिम - िापमान - आरषिा - पवन वेग का ।

6.2. हवा की तदशा में मौसमी बदलाव.

6.3. क्षेि में बाढ़ के दौरान अब िक का दजय दकया गया उच्चिम जल स्िर ।

6.4. क्षेि का तबजली और भूकंप संबंिी डेटा।

21

संचार तलंक.

7.1. बाहरी संचार के तलए टेलीफोन/टेलेक्स/वायरलेस एवं अन्य संचार सुतविाओं की उपलब्ििा।

7.2. प्रथिानवि आंिररक संचार सुतविाएं।

22

तवतनमाषण प्रतक्रया की जानकारी.

8.1. प्रतक्रया प्रवाह आरेख.

8.2. प्रतक्रया और प्रौद्योतगकी पर संतक्षि लेख।

8.3. महत्वपूणष प्रतक्रया पैरामीटर जैसे दबाव तनमाषण, िापमान वृति और रन-अवे प्रतितक्रयाएं।

8.4. प्रतक्रया के तलए महत्वपूणष अन्य बाह्य प्रभाव तजनके सुरक्षा संबंिी तनतहिाथष हैं, जैसे नमी या पानी का प्रवेश, असंगि पदाथों के साथ संपकष, अचानक तबजली गुल

होना।

8.5. तवतनमाषण प्रौद्योतगकी में शातमल सुरक्षा प्रदूर्ण तनयंिण उपकरणों या उपायों की तवशेर्िाएं।

23

खिरनाक सामतग्रयों की जानकारी.

9.1. कच्चा माल, मध्यविी, उत्पाद और उप-उत्पाद िथा उनकी मािा (प्रत्येक खिरनाक पदाथष के संबंि में सामग्री सुरक्षा डेटा शीट संलग्न करें)।

9.2. कच्चे माल/मध्यविी/उत्पादों/उप-उत्पादों (तकसी भी समय संग्रहीि की जाने वाली अतिकिम मािा) के तलए प्रस्िातवि मुख्य और मध्यविी भंडारण।

9.3. सामग्री के आगमन और बतहगषमन के तलए पररवहन तवतियां, उनकी मािाएं और अपनाए जाने वाले संभातवि मागष।

9.4. सामग्री को संभालिा, - आंिररक और बाह्य पररवहन, िथा - तनपटान (िैयार उत्पादों की पैतकंग और अग्रेर्ण) के नलए प्रथिानवि सुरक्षा उपाय :-

190

DELHI GAZETTE : EXTRAORDINARY

PART IV]

24

अपतशष्टों एवं प्रदूर्कों के फैलाव/तनपटान पर जानकारी।

10.1. सामनियों के अंिवायह और बनहवायह के नलए प्रमुख प्रदूर्क पररवहन तवतियाूँ, उनकी मािाएूँ और अनुसरण तकए जाने वाले संभातवि मागष। (गैस, रव,

ठोस) उनकी तवशेर्िाएूँ और मािाएूँ (औसि और अतिकिम भार पर)।

10.2. उत्पन्न ठोस अपतशष्टों की गुणवत्ता एवं मािा, उनके उपचार एवं तनपटान की तवति।

10.3. वायु, जल और मृदा प्रदूर्ण की प्रत्यातशि समस्याएूँ और उन्हें तनयंतिि करने के तलए प्रस्िातवि उपाय, तजनमें अपतशष्टों का उपचार और तनपटान शातमल है।

10.4 प्रतक्रया संबंिी खिरों की जानकारी।

25

प्रतक्रया खिरों की जानकारी.

11.2. जोतखम मूल्यांकन अध्ययन पर ररपोटष की एक प्रति संलग्न करें।

11.3. दुघषटना की नथिनियों/व्यावसातयक स्वास््य खिरों या समाि संयंत्रों पर प्रकानशि (र्ुली या वगीकृि) टरपोिय, कहीं भी (देश के भीिर या बाहर),

यतद कोई हो।

26

प्रस्िातवि सुरक्षा और व्यावसातयक स्वास््य उपायों की जानकारी।

12.1. अतग्नशमन सुतविाओं का तववरण िथा आपाि तस्थति से तनपटने के तलए आवश्यक जल, CO2 िथा या अन्य अतग्नशमन उपायों की न्यूनिम मािा।

12.2. प्रस्िातवि आंिररक तचतकत्सा सुतविाओं का तववरण।

27

आपािकालीन िैयारी पर जानकारी.

13.1. ऑनसाइट आपािकालीन योजना

13.2. पडोसी कारखानों के समूह के साथ पारस्पररक सहायिा योजना के तलए प्रस्िातवि व्यवस्था, यतद कोई हो।

28

कोई अन्य प्रासंतगक जानकारी। मैं प्रमातणि करिा/करिी ह ूँ तक ऊपर दी गई जानकारी मेरी जानकारी के अनुसार सही है और इसे देिे समय कोई महत्वपूणष

जानकारी नहीं तछपाई गई है।

(अनिभोगी का नाम और हस्िाक्षर)

फॉर्म-28

(नियम 68 देखें)

सार्ग्री सुरक्षा र्ाटा र्ीट

1.

रासायनिक पहिाि

रासायनिक िाम

रासायनिक वगीकरण

समािािी शब्द

व्यापार िाम

सूत्र

सी.ए.एस. संख्या।

यू एि. िं.

चवचियचमत पहिाि

चशपपांग िाम कोड / लेबल

हेज़केम िां.

[PART IV

DELHI GAZETTE : EXTRAORDINARY

191

खतरिाक अपचशष्ट आई.डी.

सांख्या

1.

3.

2.

4.

2.भौनिक और रासायनिक

र्ेिा:

नवनशष्ट गुरुत्व जल-1

क्वििांक परास/लबंदु

0C

शारीटरक अवथिा

उपनथिनि

गलिांक नहमांक लबंदु

0C

350 नर्िी सेनल्सयस नम.मी.

एि.जी पर वाष्प

दाब गंि

वाष्प घित्व (वायु-1)

300 नर्िी सेनल्सयस पर जल

में घुलिशीलिा

अन्य

चवचशष्ट घित्व (पािी-1)

पीएि

3. आग और नवथफोि र्िरा

र्ेिा:

ज्वलिशीलिा हाूँ/िहीं

एलईएल %

फ़्लैश पॉइंि 0C

ऑिो ज्वलि िाप0C

िीर्ीजी

नवथफोिक

यूईएल%

0C

र्िरिाक

प्रभाव के प्रनि संवेदिशीलिा

थिैनिक नवद्युि के प्रनि

नवथफोि संवेदिशीलिा

र्िरिाक ज्वलिशील उत्पाद

र्िरिाक बहुलकीकरण

दहिशील िरल

संक्षारण सामिी

ज्वलिशील पदािय

ऑक्सीर्ाइजर

अन्य

पायरोफोटरक पदािय

काबयनिक पेरोक्साइर्

4. प्रनिदक्रयाशीलिा र्ेिा:

रासायनिक नथिरिा

असंगनि

अन्य सामिी के साि

प्रनिदक्रयाशीलिा

र्िरिाक प्रनिदक्रया उत्पाद

192

DELHI GAZETTE : EXTRAORDINARY

PART IV]

5. थवाथ्य र्िरा र्ेिा:

50 एिएफपीए र्िरे संकेि

थवाथ्य

ज्वलिशीलिा

नथिरिा नवशेर्

प्रवेश का मागय

सीमा पीपीएम

नमलीिाम/एम350 एलर्ी

जोनर्म के प्रभाव / लक्षण

आपािकालीि उपिार

िीएलवी (एसीजीआईएि)

पीपीएम नमलीिाम/एम3

एसिीईएल

पीपीएम नमलीिाम/एम3

अिुमेय

जोनर्म सीमा

पीपीएम

नमलीिाम/एम3

गंि

6. निवारक उपाय:

कार्मयकसुरक्षा उपकरण

शीर्यक और भंर्ारण

साविानियां

7. आपािकालीि और

प्रािनमक निदकत्सा उपाय:

आग

बुझािे का माध्यम

असामान्य र्िरे

एंिीर्ॉट्स/ Desag

अनग्न

नवशेर् प्रदक्रयाएं

प्रािनमक उपिार के उपाय

जोनर्म

अपनशष्ट

निपिाि

नवनि

उठाए जािे वाले कदम

8. अनिटरक्त जािकारी या

संदभय:

9. निमायिा एवं आपूर्ियकिाय

र्ेिा:

फमय का िाम

पिा

व्यनक्त से सांपकग करिा

(आपाि नथिनि में)

र्ाक पिा

थिािीय निकाय शानमल

िेलीफोि / िेलेक्स संपकय

मािक पैककंग

िेलीिादफक संपकय

ट्रैमकार्य संदभय का नववरण

अन्य

[PART IV

DELHI GAZETTE : EXTRAORDINARY

193

10.

अस्वीकरण

इस सामग्री डेटा शीट में चिचहत जािकारी चवश्वसिीय मािी जाती है, लेककि इसकी सटीकता, ककसी चवशेष अिुप्रयोग के चलए

उपयुिता या इससे प्राप्त होिे वाले पररणामों के सांबांि में ककसी भी प्रकार की कोई प्रचतचिचित्व गारांटी या वारांटी िहीं िी

जाती है। यह सुचिचित करिा चिमागता/चवक्रेता की चज़म्मेिारी है कक सामग्री सुरक्षा डेटा शीट में चिचहत जािकारी उसके द्वारा

उपयोग ककए जािे वाले या बेिे जािे वाले उत्पाि चिमागण के चलए प्रासांचगक है। सरकार ककसी भी चवशेष उद्देश्य के चलए इस

िस्तावेज़ की पयागप्तता के सांबांि में कोई व्यि या चिचहत वारांटी िहीं िेती है।.

फॉमग-29

(चियम 91 िेखें)

जुमागिा लगािे के आिेश के चवरुद्ध अपीलीय प्राचिकारी के समक्ष अपील के चलए प्रोफॉमाग

सेवा मे,

अपीलीय प्राचिकारी

मैं, अिो हस्ताक्षरी चिम्नचलचखत चववरण के साि, व्यावसाचयक सुरक्षा, स्वास््य और कायग चस्िचत सांचहता 2020 की िारा

111(2) के तहत -----------------(जुमागिा लगािे वाले अचिकारी का चववरण) के आिेश के चखलाफ अपील प्रस्तुत करता हां।

6

प्रचतष्ठाि का िाम और पता.

7

अपील करिे वाले व्यचि का िाम और पता चववरण

8

अचिकारी द्वारा लगाई गई जुमागिे की राचश.

9

अपील के चलए आिार सहायक िस्तावेजों के साि घोषणा

मैं, एतद्द्वारा घोषणा करता/करती हूँ कक ऊपर किए गए चववरण मेरी/हमारी जािकारी और चवश्वास के अिुसार सत्य हैं और

मैं एतद्द्वारा घोषणा करता/करती हूँ कक मेरे द्वारा की गई उपरोि गणिा में कोई भी त्य चिपाया िहीं गया है या गलत ढांग

से प्रस्तुत िहीं ककया गया है।

अपील करिे वाले व्यचि के हस्ताक्षर:

तारीख:

जगह:

मोबाइल िांबर:

ई-मेल (यकि कोई हो):

194

DELHI GAZETTE : EXTRAORDINARY

PART IV]

LABOUR DEPARTMENT

Delhi, the 3rd December, 2025

NOTIFICATION

No. F.27(118)/CIF/Lab/2021/1089.—―In exercise of the powers conferred by Section 133 and

135 of the Occupational Safety, Health & Working Conditions Code, 2020 read with S.O. 272(E) dated

16.01.2023 of Ministry of Home Affairs, Government of India and in supersession of (i) The Delhi Factories

Rules, 1950, (ii) The Delhi Building and Other Construction Workers (Regulation of Employment and

condition of Services) Rules, 2002 and (iii) The Delhi Contract Labour (Regulation and Abolition) Rules,

1972 except as respects things done or omitted to be done before such supersession are hereby notified as

required by Section 133 and 135 of the said Code for the information of the persons likely to be affected

thereby the Lieutenant Governor of the National Capital Territory of Delhi proposes to make the following

rules namely the Delhi Occupational Safety, Health and Working Conditions Rules, 2025, and which are

hereby notified, as required by sub-section 1 (a) of Section 137, for information of all persons likely to be

affected thereby;

Notice is hereby given that the draft of rules shall be taken into consideration after the expiry of a

period of forty-five days from the date of publication of this notification in the official Gazette together with

objections and suggestions, if any, which may be addressed to the Labour Department, C Block, 5, Sham

Nath Marg, Delhi – 110054 and/or on email i.e. [email protected]. The objections and suggestions should

be sent in Performa containing column (i) specifying the name and address of the person/organization and

column (ii) specifying the rule or sub-rule which is proposed to be modified and column (iii) specifying the

revised rule and sub-rule proposed to be substituted and reasons thereof. The objections and suggestions,

which may be received from any person or organization with respect to the said draft notification before

expiry of the period specified above, will be considered by the Government of National Capital Territory of

Delhi.‖

CHAPTER-I PRELIMINARY

1

Short title, extent and commencement. -

These rules may be called as ―The Delhi Occupational Safety, Health and

Working Conditions Rules, 2025‖.

(1) They shall extend to whole of the National Capital Territory of Delhi (hereinafter

called Delhi).

(2) They shall come into force on and with effect from the date of their publication in

the Official Gazette.

2

Definitions. -

1. In these rules, unless the context otherwise requires, -

(a) "Appendix" means an appendix appended to these rules;

(b) "Code" means the Occupational Safety, Health and Working Conditions Code, 2020

(Central Act No. 37 of 2020);

(c) Competent Person :- The Chief Inspector-cum-Facilitator may recognize any person

or organisation as a "Competent person", as per the requirements set out in the

Schedule-A.

(d) ―Continuous Process‖ means the materials either dried bulk or fluids that are being

[PART IV

DELHI GAZETTE : EXTRAORDINARY

195

processed and are continuously in motion, undergoing chemical reaction and are

subject to mechanical or heat treatment or any other process specified by the

Government;

(e) ―Calendar year‖ means the period of twelve months beginning from the 1st day of

January in any year;

(f)

―Delhi‖ means National Capital Territory of Delhi.

(g) "Form" means the form appended to these rules;

(h) "Government" means the Lt. Governor as referred under clause (1) of article 239

AA of the Constitution;

(i)

―Hazardous waste‖ means the hazardous waste as defined in clause (17) of sub- rule

(1) of rule 3 of the Hazardous and Other Wastes (Management and Transboundary

Movement) Rules, 2016 as amended from time to time;

(j)

―Hazardous substances‖ means the chemicals which are defined in rule 2(e) of the

Manufacture, Storage and Import of Hazardous Chemical Rules, 1989 or any other

such substance which the Government or the Central Government may notify from

time to time;

(k) ―Licensing Authority‖ means authority appointed by the Government by

notification under the sub-section (1) of section 119;

(l)

"Major accident" means -an incident involving loss of life inside or outside the

installation, or ten or more injuries inside and/or one or more injuries outside or

release of toxic chemicals or explosion or fire or spillage of hazardous chemicals

resulting in on-site or off-site emergencies or damage to equipment leading to

stoppage of process or adverse effects to the environment;

(m) ―Major Accident Hazard (MAH) installation‖ means a factory as defined in rule 2(ja)

of Manufacture, Storage and Import of Hazardous Chemical Rules, 1989;

(n) ―Portal‖ means the website of the Government for delivering services under the Code

and the rules made thereunder;

(o) ―Recognised university or institution‖ means, -

a. any other University or institution, incorporated by law, by the Central or a n y State

Government; or

b. any other University or institution recognized by the University Grant

Commission;

(p) ―Registering officer‖ means Chief inspector-cum Facilitator for the purpose of factory

and Joint/Dy. Labour Commissioner of respective jurisdiction for the purpose of other

establishments.

3

Income of dependents and sources of income under clause (x) of sub-section (1)

196

DELHI GAZETTE : EXTRAORDINARY

PART IV]

of section 2. – Labour department, Government may, by general or special orders,

may specify the income criteria and define sources of income for not including

dependents within the definition of ―Family‖.

CHAPTER-II

REGISTRATION

4

Registration of establishment under sub-section (2) of section (3). -

(1) The application shall be submitted to the Registering Officer in Form-01 on portal

giving details about the establishment, and uploading documents related to

registration of the establishment, proof of Identity and address of the employer(s) as

specified in the Form along with the requisite fees as per schedule given below. The

Form shall be signed digitally or in any other manner as may be required on the

portal. The applicant shall be responsible for veracity of all information submitted

in the application.

Fee Schedule (For Establishment)

Number of employees to be

employed

Registration Fee

up to 50

2000

51-100

3000

101-200

5000

201-500

7000

500-1000

10000

Above 1000

15000

(2)

The certificate of registration shall be issued by the registering officer

electronically.

(3)

Every application referred to in sub-rule 1 shall be accompanied by the information

on interstate migrant worker in Form-02.

(4)

If the application for registration is not made within 60 days after the

commencement of the Code, to which provisions of the code apply, a late fee of

twenty five percent annually of fee payable as specified in the schedule under sub-

rule 1 shall be charged.

(5)

If there is any increase in the number of employees to be employed in the

establishment subsequent to its registration, then the differential amount as

per the schedule mentioned in sub-rule 1 shall be payable by the employer

concerned.

(6)

A register of registered establishment in Form-03 shall be maintained on the portal.

5

Appeal under section 4. -

(1) Where the memorandum of appeal is in order, the appellate officer, who shall be

[PART IV

DELHI GAZETTE : EXTRAORDINARY

197

Additional Labour Commissioner, admit, acknowledge and intimate admission of

such appeal, and shall register and maintain the appeal in electronic form.

(2) The appellate officer shall send the notice of the appeal to the registering officer,

against whose order the appeal has been preferred and the registering officer shall

thereupon send the records of the case to the appellate officer online electronically.

(3) The appellate officer shall send a notice electronically to the appellant to appear

before him on such date and time as may be specified in the notice for the hearing of

the appeal.

(4) If on the date fixed for hearing, the appellant does not appear, the appellate officer

may dismiss the appeal ex-party and inform such decision to the appellant

electronically.

(5) Where an appeal has been dismissed, the appellant may apply electronically to the

appellate officer for the restoration of the appeal within thirty days from the date of

receipt of the order and if the appellate officer is satisfied that the appellant was

prevented by sufficient cause from appearing, the appellate officer shall restore the

appeal.

(6) The order of the Appellate Officer shall be communicated electronically to the

appellant and to the registering officer against whose order, the appeal has been

preferred.

6

Notice of commencement and cessation of operation under sub-section (1) of

section 5.-

The employer of every establishment being factory or relating to contract labour or

building or other construction works shall, before thirty days of the commencement

or cessation of operation, submit to the Registering Officer in Form-04,

electronically. In case of cessation of operation, such form shall be enclosed with a

certificate that the payment of all dues to the workers employed in the establishment

have been made and the premises is kept free from hazardous chemicals and

substances.

CHAPTER-III

DUTIES OF EMPLOYER AND EMPLOYEES ETC.

7

Medical examination of employees under clause (c) of sub-section (1) of Section

6. -

(1) Every employer of factory and building or other construction work shall arrange to

conduct free of cost, medical examination for every worker annually, within 120

days from the commencement of every calendar year, who has completed 45 years

of age.

(2) Every employer of industry involving hazardous process as defined under first

198

DELHI GAZETTE : EXTRAORDINARY

PART IV]

schedule of the OSH Code, 2020 shall arrange to conduct free of cost, medical

examination for every worker annually, within 30 days from the commencement of

every calendar year.

(3) The medical examination shall be conducted by a qualified medical practitioner as

per schedule given below. The Medical Certificate shall be submitted by the

qualified medical practitioner to the concerned employer and employee. The record

of medical examination shall be made available to the Inspector-cum-Facilitator for

inspection, whenever required.

SCHEDULE

General

Establishment

Blood Urine

X ray

Establishment

dealing with

Hazardous

Process or

Hazardous

Substance or

Hazardous

Waste

Blood Urine

X ray PFT

Sputum Audiometry

(if

applicable)

Any other test

recommended

by medical

inspector-

cum-

facilitator

The record of medical examination shall be maintained in Form-05 and shall be

made available to the Inspector-cum-Facilitator for Inspection, whenever required.

(4) If any qualified medical practitioner attends on a person who is or has been

employed in an establishment to be suffering from any disease specified in the

Third Schedule, the qualified medical practitioner shall, without delay, send a report

in writing to the office of the Chief Inspector-cum-Facilitator stating-

(a) the name and full postal address of the patient,

(b) the disease from which he believes the patient to be suffering, and

(c) the name and address of the establishment in which the patient is or was last

employed.

8

Letter of appointment to employee under clause (f) of sub-section (1) of Section

6.-

No employee shall be employed in any establishment unless he has been issued a

letter of appointment as per Performa in Form-06:

Provided that, an existing employee who has not been issued an appointment letter

containing the required particulars, shall be issued an appointment letter within

three months of coming into force of this rule.

[PART IV

DELHI GAZETTE : EXTRAORDINARY

199

9

Notice of accidents and dangerous occurrences under sub-section (1) Section 10

and Section 11.-

(1)

When any accident which results in the death of any person or which

results in such bodily injury to any person as is likely to cause his death or dangerous

occurrence specified in Schedule given below which does not result into death or

bodily injury to any person, takes place in an establishment, the employer or

manager of a factory or employer of an establishment shall as early as possible send

a notice thereof by telephone, special messenger or email to the Inspector- cum-

Facilitator and the Chief Inspector-cum-Facilitator.

SCHEDULE

The following class of occurrence shall be dangerous occurrence within the

meaning of this rule:-

(i)

Bursting of any plant or pipeline or equipment containing petroleum, steam,

compressed air or other substance at a pressure greater than the atmospheric

pressure;

(ii)

Collapse or failure of a crane, derrick, winch, hoist or other appliances used in

raising or lowering persons or goods, or any part thereof, or the overturning of a

crane.

(iii)

Explosion, explosion due to explosives, fire, leakage or release of harmful toxic

gases, bursting out, leakage or escape of any molten metal, or hot liquid or gas

causing bodily injury to any person or damage to any room or place in which

persons are employed;

(iv)

Explosion of a receiver or container used for the storage at pressure greater than

atmospheric pressure of any gas or gases (including air) or any liquid or solid

resulting from the compression of gas.

(v)

collapse or failure of lifting appliances or hoist or conveyors or other similar

equipment for handling building or construction material or breakage or failure of

rope, chain or loose gears; overturning of cranes used in building or other

construction work; falling of objects from height;

(vi)

collapse of any wall, floor, gallery, roof bridge, tunnel, chimney, wall, building or

subsidence of soil or any other structure, platform, staging, scaffolding or any

means of access including formwork; contact work, excavation and collapse of

transmission;

(vii)

Spillage or leakage of hazardous substances and damage to their container;

(viii)

collapse, capsizing, toppling or collision of transport equipment within the

200

DELHI GAZETTE : EXTRAORDINARY

PART IV]

establishment;

(ix)

fall from height of any excavation, loading or transport machinery;

(x)

an instantaneous failure of a pillar, part of a pillar or several pillars of coal (i.e., a

bump) in working below ground;

(xi)

a rock-burst in working belowground; a premature collapse of any part of the

working;

(xii)

a breakage, fracture or failure of an essential part of any machine or apparatus

whereby the safety of persons may be endangered;

(xiii)

a slide causing injury to any person, damage to any machinery, or interruption

of normal mining operations;

(xiv)

failure of dump or side in opencast working; a blowout;

(xv)

a failure of any structure or installation whereby the safety of persons may be

endangered; or spark generated due to electrical flash-over causing burn injury to

any person;

(xvi)

a major uncontrolled emission of petroleum or chemical spillage;

(2)

When any accident or dangerous occurrence specified in Schedule

mentioned in sub-rule 1, which results in the death of any person or which results

such bodily injury to any person as is likely to cause his death, takes place in an

establishment, a notice shall also be sent to, -

(a)

The District Magistrate or Sub-Divisional Magistrate;

(b)

the Officer-in-charge of the Police Station;

(c)

the family of the injured or deceased person; and

(d)

to the authorities of concerned State, in case of inter-state migrant worker.

(3)

Any notice as required under Sub-rule (1) and (2) shall be confirmed by

the employer or manager of a factory or employer of an establishment to the authorities

mentioned in these sub-rules within 24 hours from the time of the accident by sending a

written report in Form-07 which results in the death of any person or bodily injury to

any person as is likely to cause his death. In case of a dangerous occurrence

specified in Schedule given above which does not result into death or bodily injury

to any person, a written report in Form-07 shall be sent to the authorities mentioned

in Sub-rule (1).

(4)

When any accident or dangerous occurrence specified in the Schedule

mentioned in sub-rule 1 takes place in an establishment and it causes such bodily

injury to any person that prevents the injured person from working for a period of

48 hours or more, immediately following the accident or the dangerous occurrence,

[PART IV

DELHI GAZETTE : EXTRAORDINARY

201

as the case may be, the employer of the establishment shall send a report thereof

physically to the Chief Inspector-cum-Facilitator in Form-07 within 24 hours after

the expiry of 48 hours from the time of the accident or the dangerous occurrence.

Provided that if in the case of an accident, death occurs of any person injured by

such accident after the notices and reports referred to in the foregoing sub- rule have

been sent, the employer of the establishment shall forthwith send an intimation

thereof by telephone, special messenger or email to the authorities and persons

mentioned in sub-rules (2) and (3):

Provided further that, if the period of disability from working for forty- eight

hours or more referred to in sub-rule (4) does not occur immediately following the

accident but later on occurs in more than one spell, the report shall be sent to the

Inspector-cum-Facilitator and Chief Inspector-Cum- Facilitator in Form-07 within

twenty-four hours immediately following the hour when the actual total period of

disability from working resulting from the accident becomes forty-eight hours.

10

Notice of disease under sub-section (1) and (2) of Section 12. -

(1) A notice of disease in the Form-08 shall be sent within a week physically from the

date of diagnosing the disease, to the Inspector-cum-Facilitator and Chief Inspector-

cum-Facilitator, by the employer or occupier or manager of an establishment in

which there occurs any disease as notified under the Third Schedule of the Code.

(2) A notice by the medical practitioner in Form-08 on detection of disease as notified

under the Third Schedule of the Code shall be sent physically within a week from

the date of diagnosing the disease to the Inspector-cum-Facilitator and Chief

Inspector-cum-Facilitator.

11

Duties of employee under clause (d) and (g) of Section 13.- If an employee comes

to know about any unsafe work or unhealthy condition in the establishment, he shall

report to the employer, health and safety representative or safety officer as soon as

possible, electronically or in writing or telephonically.

12

Rights of Employee under sub section (3) of section 14.- On receipt of

information from the employee relating to the existence of an imminent danger to

their safety and health, the employer shall take immediate remedial action in this

regard.

The employer, whether satisfied or not, shall send such report along with action

taken, to the Inspector-cum-facilitator electronically or by speed post.

202

DELHI GAZETTE : EXTRAORDINARY

PART IV]

CHAPTER-IV

OCCUPATIONAL SAFETY AND HEALTH

13

Constitution of the Delhi Occupational Safety and Health Advisory Board under

sub section (2) of section 17. -

(1) The Government of National Capital Territory of Delhi shall constitute ―The Delhi

Occupational Safety and Health Advisory Board‖ herein after referred to as

―Board‖.

(2) The Board shall consist of: -

(i)

Labour Commissioner, Labour Department, Government…..Chairperson (ex-

officio);

(ii)

Chief Inspector-cum-Facilitator, Labour Department, Government - Member

Secretary (ex-officio);

(iii)

Member Secretary, Delhi Pollution Control Committee, New Delhi- Member (ex-

officio);

(iv)

Director, Delhi Health Services, New Delhi—Member (ex-officio);

(v)

Additional Labour Commissioner, Labour Department, Government—Member (ex-

officio);

(vi)

Deputy Chief Inspector-cum-Facilitator, Labour Department, Government —

Member (ex-officio);

(vii) Occupier, largest MAH Installation- Member

(viii) Two representatives of employers- Member

(ix)

Two representatives of employees- Member

(x)

Two members of the District Crisis Group of Off-Site Emergency Plan having

expertise in Occupational Safety and Health;

(3) The Board shall meet to discharge the functions as specified in sub-section (1) of

section 17 of the Code.

(4) The term of office of the members referred to in clauses (vii) to (x) of sub-rule (2)

shall be of three years and accordingly Identity Cards shall be issued to non-official

members for that period.

(5) Notwithstanding anything contained in this rule, members referred to in clauses (vii)

to (x) of sub-rule (2) will continue to hold office during the pleasure of the

Government.

(6) If a member changes his address, he shall notify his new address to the Member-

Secretary of the Board who shall thereupon enter his new address in the official

records.

(7) When a vacancy occurs or is likely to occur on completion of the term of the

member in the membership of the Board or resignation of a member or due to

removal, the Member Secretary shall submit a report to the Government to

nominate a person to fill the vacancy.

(8) The Board shall meet at such places and at such times as may be decided by the

Chairperson and it shall meet at least once in six months.

(9) Ordinarily two-week notice shall be given to the members of the Board of a

[PART IV

DELHI GAZETTE : EXTRAORDINARY

203

proposed meeting. Notice together with a list of business proposed to be transacted

approved by the Chairperson shall be sent to every member of the State Board,

through e-mail or registered post or speed post or by special messenger.

(10) In case when the Chairperson calls an emergency meeting of the Board for

considering any matter which is urgent, a notice with such reasonable time shall be

sent to every member through e-mail or by registered post or speed post or special

messenger.

(11) No business other than for which the meeting of the Board has been convened shall

be transacted at the meeting except with the permission of the Chairperson.

(12) No business shall be transacted at any meeting of the Board unless at least seven

members are present in that meeting which shall include at least one non-official

member: Provided that if at a meeting, less than seven members are present, the

Chairperson may adjourn the meeting to another date informing the members

present and giving notice to the other members that he proposes to dispose of the

business at the adjourned meeting whether there is prescribed quorum or not, and it

shall there upon be lawful for him to dispose of the business at the adjourned

meeting irrespective of the number of members attending.

(13) Every matter which the Board is required to take into consideration shall be

considered at a meeting of the Board, or if the Chairperson so directs, by sending

the necessary papers to every member for opinion, and the matter shall be disposed

of in accordance with that decision of the majority: Provided that where there is no

opinion of majority on a matter and the members of the Board are equally divided,

the Chairperson shall have a second or a casting vote.

(14) The Member Secretary shall, with the approval of the Chairperson, issue notice to

convene meetings of the Board and keep record of minutes and shall take necessary

steps for carrying out the decision of the Board.

14

Resignation.-

(1) A member of the Board, not being an ex-officio member, may resign by a letter

in writing addressed to the Government.

(2) The seat of such a member shall fall vacant from the date on which his

resignation is accepted by the Government or on the expiry of thirty days from the

date of receipt of intimation of resignation, whichever is earlier.

15

Cessation of Membership.-

(1) If any member of the State Board, not being an ex-officio member, fails to attend

three consecutive meetings of the Board, without obtaining the leave sanctioned by

the Chairperson of the Board for such absence, he shall cease to be a member of the

204

DELHI GAZETTE : EXTRAORDINARY

PART IV]

Board:

Provided that the Chairperson may, if it is satisfied that such member was prevented

by sufficient cause from attending three consecutive meetings, direct that such

cessation shall not take place and on such direction being made, such member shall

continue to be a member of the Board.

(2) A member nominated shall cease to be a member of the Board if he ceases to

represent the category of interest from which he was so nominated.

16

Disqualification for membership.-A person shall be disqualified for being a

member of the Board-

(i) if he is of unsound mind and stands so declared by a competent authority;

(ii) if he is an un-discharged insolvent; or

(iii) if he has been convicted for an offence, having a penalty of imprisonment of three

months or more.

17

Removal from Membership.-The Government may remove any member of the

Board, if in its opinion such member has ceased to represent the interest which he

purports to represent the Board.

18

Travelling Allowances of Members.-

(1) The travelling allowance of an official member of the Board shall be governed by

the rules applicable to him for journey performed by him on official duties and shall

be paid by the authority paying his salary.

(2) The non-official member of Board shall be allowed traveling allowance and daily

allowance for

attending the meeting of the Board at such rates as are admissible to a Deputy

Secretary of the Government and daily allowance shall be calculated at the

maximum rate permissible to such Deputy Secretary.

19

Technical Committee under sub section (3) of section 17. -

(1) The minimum and maximum number of members of the Technical Committee and

Advisory Committee shall be three and seven respectively.

(2) The members of the Technical Committee or Advisory Committee should have

expertise in the field concerned.

20

Collection of statistics and portal for Inter-State migrant workers under sub section

(1) of section 21.-

The employer shall submit the details of occupational safety and health statistics

electronically on web portal designated for the purpose.

[PART IV

DELHI GAZETTE : EXTRAORDINARY

205

21

Safety Committee under sub section (1) of section 22. -

(1) Every establishment shall constitute a Safety Committee;

(i) Employing 250 or more workers; or

(ii) Involving hazardous process as defined in section 2(za) of the Code; or

(iii) Dangerous operations as defined in section 82 of the Code.

(2) Safety Committee would be constituted in the following manner:-

(i)The employer or his authorized representative shall issue a notice for constituting the

safety committee and inform the workers‘ representatives and also display on the

notice board.

(ii)The notice shall call for nomination of workers‘ representatives in the safety

committee.

(iii)The representative of the workers shall be elected by the workers. Adequate

representation of the women workers must be there in the committee.

(iv)The representatives for the management of Safety Committee shall include; -

(a) a senior official, who by virtue of his position in the establishment, can contribute

effectively to the functioning of the Committee. Such senior official shall be the

Chairman of the Safety Committee;

(b) a Safety Officer or ―Medical Officer‖, wherever available, and the Safety Officer in

such a case, shall be the Secretary of the Safety Committee; and

(c) a representative each from the human resource, production, maintenance and

purchase departments.

(3) The tenure of the safety committee shall be of three years.

(4) The safety committee shall meet at least once in every quarter.

(5) Safety Committee shall have the right to seek information in respect of -

(i) potential safety and health hazards to which the workers may be exposed at

workplace;

(ii) data on accidents as well as data resulting from surveillance of the working

environment and of the health of employees, conducted at such establishments.

(6) The employer, occupier, or manager shall, within a period of 15 days from the date

of receipt of the recommendations of the Safety Committee, shall take action to

implement the recommendations.

(7) The minutes of the meeting shall be recorded and produced to the Inspector-cum-

Facilitator on demand.

(8) The functions and duties of the Safety Committee shall include, -

(i) assisting and co-operating with the management in achieving the aims and objects

outlined in the Health and Safety Policy of the establishment;

(ii) dealing with all matters concerning health, safety and environment and to arrive

at practicable solutions to problems encountered;

(iii) creating safety awareness amongst all employees;

(iv) undertaking educational, training and promotional activities;

(v) deliberating on reports of safety environmental and occupational health surveys,

emergency plans, safety audits, risk assessment and implementation of the

206

DELHI GAZETTE : EXTRAORDINARY

PART IV]

recommendations made in the reports;

(vi) carrying out health and safety surveys and identifying causes of accidents;

(vii) looking into any complaint made on the likelihood of an imminent danger to the

safety and health of the employees and suggest corrective measures; and reviewing

the implementation of the recommendations made by it.

(9) Where owing to the size of establishment or any other reason, the functions referred

to in sub rule (8) cannot be effectively carried out by the safety committee, it may

establish sub- committee as may be required to assist it.

22

Safety Officer under sub-section (2) of section 22. -

(1) There shall be one Safety Officer, -

(i) for factories employing five hundred or more workers:

Provided that for the purposes of this clause, there shall be an additional Safety

Officer for every five hundred workers or a fraction thereof; or

(ii) for factories carrying on hazardous process or building or other construction work,

employing two hundred fifty workers or more:

Provided that for the purposes of this clause, there shall be an additional Safety

Officer for every two hundred fifty workers or a fraction thereof.

(2) A person shall not be eligible for appointment as a safety officer, unless he, -

(i) possesses a degree of a recognised university or institution in any branch of

Engineering or Technology and has practical experience of working in a factory or

building or other construction work in a supervisory capacity for a period of not less

than two years or possesses a degree in Physics or Chemistry from a recognised

university or institution and has practical experience of working in a factory or

building or other construction work in a supervisory capacity for a period of not less

than five years, or possesses a recognised diploma in any branch of engineering or

technology and has practical experience of working in a factory or building or other

construction work in a supervisory capacity for a period of not less than five years;

and

(ii) has adequate knowledge of language spoken by majority of the workers in the

region in which the factory or building or other construction work where he is to be

appointed, is situated.

(3) The occupier of the factory or employer of building or other construction

establishment, as the case may be, shall inform the Chief Inspector-cum-Facilitator

and Inspector-cum-Facilitator about appointment of the Safety Officer within one

month from such appointment.

(4) Following shall be the duties of a safety officer, namely: -

(i)

to advise and assist the management of the establishment in the fulfillment of its

obligations, statutory or otherwise, concerning prevention of personal injuries and

maintenance of a safe working environment;

(ii)

to advise the concerned departments in planning and organising measures necessary

for the effective control of person injuries;

(iii)

to advise on safety aspects in all job studies, and to carry out detailed job safety

studies of selected jobs;

(iv)

to check and evaluate the effectiveness of the action taken or proposed to be taken

to prevent personal injuries;

(v)

to advise the purchase and stores departments in ensuring high quality and

[PART IV

DELHI GAZETTE : EXTRAORDINARY

207

availability of personal protective equipment;

(vi)

to advise on matters relating to plant safety inspections;

(vii) to carry out plant safety inspections in order to observe the physical conditions of

work and the work practices and procedures followed by workers and to render

advice on measures to be adopted for removing the unsafe physical conditions and

preventing unsafe actions by workers;

(viii) to tender advice on matters relating to reporting and investigation of industrial

accidents and occupational diseases;

(ix)

to investigate accidents;

(x)

to investigate the cases of occupational diseases contracted and dangerous

occurrences reportable under the Code;

(xi)

to advise on the maintenance of such records as are necessary relating to accidents,

dangerous occurrences and occupational diseases;

(xii) to promote setting up of safety committees and act as advisor and convener to such

committees;

(xiii) to organise in association with the concerned departments of the establishment

campaigns, competitions, contests and other activities which will develop and

maintain the interest of the workers in establishing and maintaining safe conditions

of work and procedures; and

(xiv) to design and conduct either independently or in collaboration with the training

department of the establishment, suitable training and educational programmes for

the prevention of personal injuries.

(5) An employer of the establishment shall provide each safety officer with such facilities,

equipment and information as are necessary to enable him to discharge his duties

effectively.

(6) No safety officer shall be required or permitted to do any work which is inconsistent

or detrimental to the performance of the duties specified in sub-rule (5).

CHAPTER-V

HOURS OF WORK AND ANNUAL LEAVE WITH WAGES

23

Daily and weekly working hours under clause (b) of sub-section (1) of Section

25.-

(1)

No worker shall be required or allowed to work in an establishment for

more than 48 hours in any week.

(2)

The periods of work of adult workers in an establishment each day

including intervals and spreadovers shall be fixed by the Government through

notification.

24

Weekly Day of Rest under section (2) of section (26). -

(1) No worker shall be required or allowed to work in an establishment on the first day

of the week (herein after referred to as the said day), unless-

(a) he has or will have a holiday for a whole day on one of the three days immediately

before or after the said day; and

208

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(b) employer of the establishment has, before the said day or the substituted day under

clause(a),whichever is earlier, -

(i) delivered a notice to the Inspector-cum-Facilitator of his intention to require the

worker to work on the said day and of the day which is to be substituted, and

(ii) displayed a notice to that effect in the establishment:

Provided that no substitution shall be made which will result in any worker working

for more than ten days consecutively without a holiday for a whole day.

(2) Notice given under sub-rule(1) may be cancelled by a notice delivered to Inspector-

cum-Facilitator and a notice displayed in the establishment not later than the day

before the said day or the holiday to be cancelled, whichever is earlier.

(3) Where, in accordance with the provisions of sub-rule (1), any worker works on the

said day and has had a holiday on one of the three days immediately before it, that

said day shall, for the purpose of calculating his weekly hours of work, be included

in the preceding week.

25

Compensatory holidays.-

(1) Except in the case of worker engaged in any work which for technical reasons must

be carried on continuously throughout the day, the compensatory holidays to be

allowed under sub-section (3) of section 26 of the Code shall be so spaced that not

more than two compensatory holidays are given in one week.

(2) The manager of the establishment shall display, on or before the end of the

month in which holidays are lost, a notice in respect of workers allowed

compensatory holidays during the following month and of the dates thereof, at the

place at which the notice of periods of works prescribed under section 31 is

displayed. Any subsequent change in the notice in respect of any compensatory

holiday shall be made not less than three days in advance of the date of that holiday.

(3) Any compensatory holiday or holidays to which a worker is entitled shall be

given to him before he is discharged or dismissed and shall not be reckoned as part

of any period of notice required to be given before discharge or dismissal

26

Extra wages for overtime under section 27. -(1) no worker shall be allowed to

work overtime exceeding one hundred forty-four hours in any quarter of a year.

(2) In calculating overtime on any day, a fraction of an hour between 15 to 30

minutes shall be counted as 30 minutes and in case of more than 30 minutes it shall

be rounded and shall be counted as an hour on actual basis.

(3) In calculating the wages or earnings in the case of a worker paid by the month,

the daily wages shall be 1/26th of his monthly wages; and in the case of any other

worker, it shall be the daily wages or earnings as the case may be.

(4) Where a worker works in an establishment for more than eight hours in any day

or for more than forty-eight hours in any week, he shall, in respect to overtime

[PART IV

DELHI GAZETTE : EXTRAORDINARY

209

work, be entitled to wages at the rate of twice his ordinary rate of wages.

(5) the spreadover for the workers shall exceed the hours that are notified by the

Government under Section 25 (1)(b) in any one day under the following works and

circumstances in factories, and building or other construction, namely;

(a) urgent repairs;

(b) work in the nature of preparatory or complimentary work;

(c) work which is necessarily so intermittent that the intervals during which they do

not work while on duty ordinarily amount to more than the intervals for rest;

(d) work which for technical reasons must be carried on continuously;

(e) engaged in making or supplying articles of prime necessity which must be made

or supplied every day,

(f) engaged in a process which cannot be carried on except during fixed seasons;

(g) engaged in a process which cannot be carried on except at times dependent on

the irregular action of natural forces;

(h) engaged in an engine-rooms or boiler-houses or in attending to power-plant or

transmission machinery;

(i) engaged in process on account of the break-down of machinery;

(j) engaged in the loading or unloading of railway wagons or lorries or trucks;

(k) exceptional press of work and

(l) engaged in any work, which is notified by the Government in the Official

Gazette as a work of national importance;

27

Notice of periods of work under section 31. -

The notice of period of work shall be displayed at conspicuous places especially at

the entry gate of the premises in Form-09 and copy of such notice shall be sent to

Inspector-cum-facilitator electronically or by registered post.

CHAPTER-VI

REGISTERS, RECORDS, AND RETURNS

28

Maintenance and production of reports, registers and other records under

section 33.- Every employer shall-

(a) maintain register of workers, wages, overtime, fine, deduction for damage or

loss in Form-10 electronically and shall be kept available at an office or the nearest

convenient building within the precincts of the establishment;

(b) The employer or the contractor, as the case may be, shall maintain a muster roll

of all the persons employed by him in the establishment in Form-11 electronically

or manually and entries shall be made at the commencement and completion of each

period of work. The employer shall make it readily available for inspection to the

Inspector-cum-Facilitator at all times during working hours.

210

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(c) in case of manual registers and other records, be legibly entered in ink in English

or Hindi;

(d) be preserved in original for a period of one calendar year after the date of the

last report or entry;

Provided that when the original record is lost or destroyed before the expiry of one

year period, true copies thereof, if available, shall be preserved for the prescribed

period;

(d) be produced, electronically or by registered post, on demand before the Chief

Inspector-cum-Facilitator or an Inspector-cum-facilitator or any person authorized

in that behalf of the Government.

29

Register of leave with wages under section 33. -

(1) The employer, occupier or manager of every establishment shall maintain in respect

of every employee thereof a record of leave with wages electronically or manually

in Form-12.

The register mentioned in sub- rule (1) shall be preserved for a period of two years

after the last entry in them has been made and shall not be destroyed even after the

expiry of that period unless it has been properly transferred to the new register.

30

Register of accident and dangerous occurrence under section 33.- The register

of accident and dangerous occurrence shall be maintained in Form-13 by employer,

occupier or manager of every establishment.

31

Display of notice board under section 33.- The employer, occupier or manager of

every establishment shall cause to display at the conspicuous place at the workplace

under his control in Form No -14.

32

Return under section 33. -Every employer of an establishment shall send annually

a return relating to such establishment in Form-15 to the Inspector-cum-facilitator

having jurisdiction so as to reach him not later than 31st January following the end

of each calendar year electronically.

CHAPTER-VII

INSPECTORS-CUM-FACILITATOR AND OTHER AUTHORITIES

33

Chief Inspector-cum-Facilitator under sub-section (5) of Section 34.- Chief

Inspector-cum-Facilitator:

(1) For factories and safety and health provisions of establishments other than

factories -Bachelor`s degree in Engineering or Technology or equivalent in any

discipline by recognised University or Institution with at least five years‘ experience

as Deputy Chief Inspector-cum-Facilitator.

(2) For establishments except mentioned in sub-rule (1) - Additional Labour

Commissioner.

[PART IV

DELHI GAZETTE : EXTRAORDINARY

211

34

Powers of Inspector-cum-Facilitator under clause (x) of sub-section (1) of

section 35. -

Manner of taking samples-

(1) An Inspector-cum-Facilitator may at any time during the normal working hours

of an establishment after informing the occupier or manager or employer of the

establishment or the other person for the time being purporting to be in charge of

the establishment take in manner hereinafter provided a sufficient sample of any

substance used or intended to be used in the establishment such use being-

(a) In the belief of the Inspector-cum-Facilitator are in contravention of any of the

provisions of the Code or the rules made thereunder; or

(b) In the opinion of the Inspector-cum-Facilitator likely to cause bodily injury to,

all injury to the health of, workers in the factory.

(2) Where the Inspector-cum-Facilitator takes a simple under sub-rule (1), he shall

in the presence of the person informed under that sub-rule, unless such person

willfully absents himself, divide the sample into three portions and effectively seal

and suitably mark them and shall permit such person to add his own seal and mark

there to.

(3) The person informed as aforesaid shall, if the Inspector-cum-Facilitator so

requires, provide the appliances for dividing, ceiling and marking the sample taken

under this rule.

(4) The Inspector-cum-Facilitator shall –

(a) forthwith give one portion of the sample to the person informed under sub-rule

(1);

(b) the second portion to a Government Analyst for analysis and report thereon;

(c) retain the third portion for production to Court before which proceedings, if any,

are instituted in respect of the substance.

(5) Any document purporting to be a report under the hand of any Government

Analyst upon any substance submitted to him for analysis and report under this rule,

may be used as evidence in any proceedings instituted in respect of the substance.

35

Manner of providing alternative employment under sub-clause (d) of clause

(A) of sub-section (1) of section 38.- (1) If any person whose employment has been

affected by an order under sub clause (a) of sub-Section (1) of Section 38, the

affected person shall be provided an alternate employment within the establishment

except the area for which such order is issued or nearest possible location at the

same wage and other benefits.

(2) If the whole or a part of the establishment is fully closed by an order, then it shall be

the duty of the employer or occupier to pay wages to the affected workers as per the

Code of Wages, 2019 (Central Act No. 29 of 2019) for the number of days for which

the establishment remained closed.

36

Appointment of ―Medical Officer‖ under sub-section (1) of section 42.- No

person shall be appointed as ―Medical Officer‖, unless he possess any recognized

medical qualification as defined in the National Medical Commission Act, 2019 (30

212

DELHI GAZETTE : EXTRAORDINARY

PART IV]

of 2019) and who is enrolled in the Indian Medical Register as defined in clause (m)

and on a State Medical Register as defined in clause (v) of section (2) and sections

35, 36, 37 and 40 of the said Act.

37

Duties of ―Medical Officer‖ under sub-section (2) of section 42.-

(1) ‖Medical Officer‖ shall carry out examination and certification of workers in a

factory engaged in hazardous processes as specified in clause (za) of sub-section (1)

of section 2 of the Code, dangerous operations declared under section 82 and an

establishment where hazardous substances are handled or stored or used;

(2) or medical supervision of any establishment or class of establishment where

cases of chronic occupational illness have occurred due to arduous nature of any

process carried on or hazardous condition of work;

(3) in respect of any establishment or class of establishment or description of

establishment in which operations involve any risk of injury to the health of any

person or class of persons employed therein;

(4) to undertake occupational health survey for any or class of an establishment,

where cases of illness have occurred or there is prevalence of diseases as prescribed

in Third Schedule of the code.

(5) ‖Medical Officer‖ shall carry out examination to assess the age and issue fitness

certificate of adolescent for employment in an establishment.

CHAPTER-VIII

SPECIAL PROVISIONS RELATING TO EMPLOYMENT OF WOMEN

38

Employment of Women in establishment under section 43. -The employer shall

ensure the following conditions, namely:-

1. the consent of the woman employee shall be taken;

2. no woman shall be employed against the maternity benefit provisions laid down

under the social security code, 2020 (36 of 2020);

3. adequate transportation facilities shall be provided to woman employee to pick-up

from her residence and drop to establishment and vice-versa;

4. the workplace including passage towards conveniences and facilities concerning

toilets, washrooms, drinking water, changing room, entry and exit of women

employee should be well-lit;

5. the toilet, washroom and drinking water facilities should be near the workplace in

an establishment where such women employee are employed;

6. provide safe, secure and healthy working conditions at the workplace such that no

woman employee is disadvantaged in connection with her employment;

[PART IV

DELHI GAZETTE : EXTRAORDINARY

213

7. more than one woman employee shall be on duty at the workplace;

8. deployment of women employee should be on rotational basis;

9. CCTV cameras must be installed at the location where women employee shall

work;

10. creche facility shall be provided wherever needed;

11. the women employee, who work in night shifts and regular shifts, shall have a

meeting through their representatives with the employer, once in eight weeks as

grievance day and the employer shall try to comply with grievances;

12. employer shall send a six monthly report to the Inspector-cum-Facilitator about the

details of women employee engaged during night shift;

13. the employer shall deploy women security guard at the workplace of women

employee;

14. the provisions of the Sexual Harassment of Women at workplace (Prevention,

Prohibition and Redressal) Act, 2013 (14 of 2013), as applicable to the establishments,

shall be complied with.

CHAPTER-IX

SPECIAL PROVISIONS FOR CONTRACT LABOUR AND INTER-STATE

MIGRANTS WORKERS ETC

PART-I

Contract Labour

39

Conditions of Licence under sub-section (3) of section 47. -The licence issued

under sub section (1) of section 47 shall be subject to the following conditions,

namely:

(i)

the licence shall be non-transferable;

(ii) The number of workmen employed as contract labour/migrant workmen in the

establishment shall not, on any day, exceed the maximum number specified in the

licence;

(iii) Except as provided in the rules the fee paid for the grant/renewal of the licence shall

be nonrefundable;

(iv) the rates of wages payable to the workers by the contractor shall as per the Code on

Wages, 2019 (Central Act No. 29 of 2019) and rules made thereunder;

(v) in case where the worker employed by the contractor performs the same or similar

kind of works as the worker directly employed by the employer of the

establishment, the wage rates, holidays, hours of work and other conditions of

service of the workers of the contractor shall be the same as applicable to the

214

DELHI GAZETTE : EXTRAORDINARY

PART IV]

workers directly employed by the employer of the establishment on the same or

similar kind of work; provided that in case of any disagreement with regard to the

type of work to the same shall be decided by the Inspector-cum-Facilitator whose

decision shall be final;

(vi) The hours of work shall conform to the rules made under Section 25 under the

Occupational Safety, Health and Working Conditions Code, 2020.

(vii) women may be employed by any contractor before 6 a.m. or after 7 p.m. in

accordance with section 43 the Occupational Safety, Health and Working

Conditions Code, 2020 and rules made their under.

(viii) the licencee shall notify any change in the number of workers or the conditions of

work to the licencing authority;

(ix) the payment of wages to all the workers (other than workers engaged in the

construction work/daily paid) should be every month through A/c Payee

Cheques/ECS only. The payment of wages should be representative of Principal

Employer, and duly verify by him/her;

(x) if the contract worker of the contractor is working at the premises of the principal

employer then it shall be the responsibility of the principal employer to provide the

facilities or amenities such as toilet, washroom, drinking water, bathing facilities if

required, changing room, first aid box, Canteen and Creche;

(xi) all other facilities and entitlements shall be provided by the contractor;

(xii) he shall intimate within fifteen days of the receipt of a contract work order about the

details the contract work order and in the manner as under rule 45;

(xiii) Every contract labour/migrant worker shall be entitled to allowances, benefits,

facilities etc., as prescribed in the Occupational Safety, Health and Working

Conditions Code, 2020 (37 of 2020) and rules made there under;

(xiv) All contract labour shall be made member of EPFO and ESIC subject to

applicability as under respective provisions of the Code on Social Security, 2020.

(xv) Every contractor shall within fifteen days of the receipt of a contract work order

shall intimate about the contract work order containing the details such as the name

of the principal employer, address of the premises where work is being undertaken,

date of commencement of the contract work, the number of contract labour

employed under that work order, duration of work orders.

(xvi) a copy of the licence shall be displayed prominently at the premises where the

contract work is being carried on; and

(xvii) the contractor shall be liable to comply with the relevant provisions of the Code.

[PART IV

DELHI GAZETTE : EXTRAORDINARY

215

40

Issue of contractor licence under of sub-section (1) of Section 48.- (1)

Application for issuing licence shall be made in Form-16 to the licencing authority

on Portal of Labour department, Government;

(2) Every application referred to sub-rule (1) shall also be accompanied by the fee and

the security at the rate specified in the scheduled given below;

FEE SCHEDULE

(Licence for Contract Labour)

Number of workers to be

employed by contractor

Fee for licence

Per annum (Rs.)

Security to be

deposited (Rs.)

50 to100

5000

50000

101-150

10000

100000

151-200

15000

150000

201-250

20000

200000

251-500

25000

250000

501-750

30000

300000

751-1000

40000

400000

1001-1500

50000

500000

1501-2000

60000

600000

Above 2000

75000

750000

(3) Payment as required under sub-rule (2) shall be paid through portal which shall be

credited to the treasury in the head of account as may be specified by Government

from time to time;

(4) Licencing Authority shall issue licence in Form-17 within a period of 30 days. If no

defect is communicated within stipulated time, the licence shall be deemed

renewed.

41

Renewal of licence under Section 48.- (1) Every contractor to whom a licence is

issued under rule 40 shall make an application for renewal of licence to the

licencing authority on portal in Form-16 at least 30 days and not before 60 days the

expiry of the licence.

(2) The licence authority shall renew the licence in Form-18 within 30 days from the

date of receipt of application. If no defect is communicated within stipulated time

the licence shall be deemed renewed.

(3) The fee chargeable for renewal of the licence shall be the same as for the grant of

licence under rule 40. Provided that if the application for renewal is not received

216

DELHI GAZETTE : EXTRAORDINARY

PART IV]

within the time specified in sub-rule (2), an additional fee of twenty-five per cent,

shall be payable for such renewal.

42

Amendment of licence under Section 48.- (1) Every contractor to whom a licence is

issued under rule 40 or renewed under rule 41 shall make an application for

amendment of licence to the licencing authority on portal in Form-19 before any

change or within three days from such change.

(2) The fee for the amendment of a licence shall be of difference of security and fee

required as per the schedule under the rule 40;

(3) the licence authority shall amend the licence in Form-18 within 30 days from the

date of receipt of application. If no defect is communicated within stipulated time

the licence shall be deemed amended.

43

Responsibility of contractor under sub-section (4) of Section 48.- (1) The rates of

wages payable to the workers by the contractor shall not be less than the rates

prescribed under the Code on Wages, 2019 and where the rates have been fixed by

agreement, settlement or award, not less than the rates fixed.

(2) In case where the worker employed by the contractor perform the same or similar

kind of work as the worker directly employed by the principal employer of the

establishment, the wage rates, holidays, hours of work and other conditions of

service of the workers of the contractor shall be the same as applicable to the

workers directly employed by the principal employer of the establishment on the

same or similar kind of work. In case of any dispute whether the work is of similar

kind, the matter be referred to the Inspector-Cum Facilitator whose decision shall be

final.

(3) In other cases the wage rates, holidays, hours of work and conditions of service

of the workers of the contractor shall be such as specified under the Code and rules

made thereunder.

(4) All contract labour shall be made member of EPFO and ESIC subject to

applicability as under respective provisions of the Code on Social Security, 2020.

(5) The contractor shall notify any change in the number of workers or conditions of

work to the Licensing Authority, electronically.

(4) Any application for refund shall, as far as possible, be disposed of within 30 days of

the receipt of the application

44

Refund of security deposit under Section 48.- (1) On expiry of the period of licence

the contractor may, if he does not intend to have his licence renewed further, make

an application electronically to the licensing authority for the refund of the security

deposited by him( in form of bank guarantee) along with copy of licence and notice

[PART IV

DELHI GAZETTE : EXTRAORDINARY

217

of completion of work and bank details in which amount is required to be refunded.

(2) If the Licensing authority is satisfied that there is no breach of the conditions of

licence or there is no order for the forfeiture of security deposit or any portion

thereof, he shall direct the refund of the security deposit to the applicant.

(3) If there is any order directing the forfeiture of any portion of contractor‗s security

deposit, the amount to be forfeited shall be deducted from the security deposit, and

balance, if any, shall be refunded to the contractor.

45

Intimation of work order and time limit for intimation under section 50.-

(1) Every contractor shall within fifteen days of the receipt of a contract work order

shall intimate about the contract work order containing the details such as the name

of the principal employer, address of the premises where work is being undertaken,

date of commencement of the contract work, the number of contract labour

employed under that work order, duration of work orders.

(2) The intimation and details of the work order shall be sent electronically to the

licencing authority of the Labour department, Govt. of NCT of Delhi.

46

Revocation or suspension of licence under section 50(2).- The following

procedure shall be followed for suspension or cancellation of licence, namely;-

(1) The licencing authority shall issue a show cause notice to the contractor in

writing through his registered email or through registered post. The service of notice

through his registered email or through registered post shall be deemed served on

contractor.

(2) The contractor shall reply to the notice given under sub section (1) within the

time limit specified in the notice.

(3) The licencing authority after considering such reply and conducting such

enquiry as deemed fit necessary, pass an order within 30 days of receipt of reply.

47

Appeal under sub-section (1) of section 52.-

The Appellate Authority under sub-section (1) of section 52 of the code shall be the

Labour Commissioner, Govt. of NCT of Delhi.

48

Responsibility for Payment of wages under section 55(1). -

(1) The contractor shall fix the wage periods in respect of which wages shall be

payable and no wage period shall exceed one month.

(2) The wages shall be paid before the expiry of seventh day after the last day of the

wage period in respect of which the wages are payable.

(3) The wages shall be disbursed through bank transfer or electronic mode only.

218

DELHI GAZETTE : EXTRAORDINARY

PART IV]

49

Experience certificate to contract labour under section 56.- Every contractor shall

issue, on demand by the contract labour, experience certificate in Form-20 to the

contract labour giving details of the period, work performed, experience gained in

various fields performed by such contract labour.

50

Prohibition of employment of contract labour under clause (b) of sub-section

(2) of section 57.- (1) If a question arises as to whether any activity of an

establishment is a core activity or otherwise, the aggrieved party may make an

application giving reasons along with supporting documents to the Government

within fifteen days with the following details:

a) Name of aggrieved party:

b) Address for communication:

c) Details of grievance:

d) Reasons of claim:

e) Details of documents attached:

Signature of aggrieved party

(2) The Government shall appoint a designated authority.

(3) The designated authority shall examine and report to the Government within

thirty days from the date of receipt of application.

(4) The Government shall pass an order based on the report received from the

authorities referred in sub-rule (2), within thirty days.

PART II

INTER-STATE MIGRENT WORKERS

51

Journey allowance under section 61. - The employer shall pay a lump sum

amount on account of fare for to & fro journey to inter-state migrant worker and

every dependent members of his family by train (not less than II Class Sleeper) or

by bus or any other mode of passenger transport from the place of employment to

the place of residence in the home state in the event of the following, namely:

(1) if he has worked for a period of not less than 180 days in the concerned

establishment(s) in preceding twelve months;

(2) the journey allowance shall be given to an inter-state migrant worker once in twelve

months.

(3) In the event of change of employer by the inter-state migrant worker during the

middle of the employment period and has not availed the journey allowance from

his previous employer, then on the basis of a certificate to be given by inter-state

[PART IV

DELHI GAZETTE : EXTRAORDINARY

219

migrant worker, the employer where the inter-state migrant worker is now working

and the such worker has completed one hundred and eighty days in preceding

twelve months including the period spent with the previous employer, then the

employer shall give journey allowance.

(4) The employer shall pay a lump sum amount of one hundred per family member per

day for food during the journey.

52

Toll free helpline number under section 63.- A Toll-Free help-line number shall

be provided by the Labour department of the Government to address queries and

grievances of the inter-state migrant workers.

53

Study of Inter-State Migrant worker under section 64.- The study of Inter –State

Migrant worker shall be conducted through reputed organization or institution

having expertise in conducting socio economic studies.

54

Format of agreement under section 66 (2).- The agreement to be entered into

between the producer and the employee of audio-visual Programme shall be in

Form-21.

55

Submission of agreement under section 66 (3).- The copy of agreement shall be

forwarded by the producer of the audio-visual Programme electronically to the

Chief Inspector-cum-Facilitator.

56

Dispute Resolution Mechanism under clause (vii) sub-section (4) section 66.-

The procedure for reference of disputes to a Conciliation Officer or a Tribunal shall

be in conformity with the Industrial Relations Code, 2020 (Central Act 35 of 2020)

and rules framed thereunder.

PART-III

FACTORIES

57

Submission of proposed building plans of factories to be constructed or

addition or alternation or extensions of the existing factory buildings for

approval through single window system of MCD Portal under sub-section (1)

of section 79.-

(1) No site shall be used without the previous permission in writing of the Chief

Inspector-cum-Facilitator for the location of a factory or no building in a factory be

constructed, reconstructed extended or taken into use as a factory or part of a

factory located in notified conforming industrial areas or a factory engaged in public

utility services as defined in Master Plan of Delhi notified from time to time

irrespective of conforming/non-conforming areas of Delhi.

220

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(2) No building shall be constructed or extended or altered and taken into use as a

factory unless plans in respect of such buildings are approved by the Chief

Inspector-cum-Facilitator.

(3) Online application of proposed building plans of factories to be constructed or

addition or alternation or extensions of the existing factory buildings shall be

submitted through portal of single window system of Municipal Corporation of

Delhi along-with flow process chart of manufacturing process, undertaking of

demolition of existing building or vacant plot certificate, as the case may be. The

proposed building plan shall contain sufficient overhead water provision exclusively

for firefighting and the plan, elevation and necessary cross sections of the building

clearly indicating means of escape in case of fire.

(4) On receipt of application, if the Chief Inspector-cum-Facilitator is satisfied that the

proposed plan is in accordance with sub-rule (3), the same shall be approved,

otherwise rejected.

(5) Plans which have already been approved under the provisions of the Factories Act,

1948 before commencement of these rules shall be deemed to have been approved

under these rules.

58

Submission of plan of existing building to be used as a Factory for the purpose

of obtaining common licence or licence to run a Factory under sub-section (1)

of section 79.-

(1) Chief Inspector-cum-Facilitator may require submission of plan of existing building

to be used as a Factory in notified conforming industrial areas of Delhi or

layout/plan of the premises to be used as a Factory or engaged in public utility

services as defined in Master Plan of Delhi notified from time to time irrespective

of conforming/non-conforming areas of Delhi through Portal.

(2) Such building plan shall contain the following details: -

(a) The site of the factory and immediate surrounding including adjacent buildings, and

elevation and necessary cross-section of building, indicating all relevant details

relating to natural lighting, ventilation and means of escape in case of fire. The plan

shall also clearly indicate the location of plant and machinery, aisles and passage

ways; and

(c) Such other particulars as the Chief Inspector-cum-Facilitator may require.

59

Grant of licence to run a Factory under sub-section (1) of section 79.-

(1) The occupier of every factory shall submit an application in Form-22 with required

[PART IV

DELHI GAZETTE : EXTRAORDINARY

221

information through Portal for the grant of licence to run a factory along with

required fee as per Schedule, existing building plan and other documents,

particulars as the Chief Inspector-cum-Facilitator or any other officer appointed

under section 34 of the Code and specially empowered in this behalf by the

Government, may require.

(2) Licence may be applied for one, five or ten years. Licence fee shall be the number

of years multiplied by the fees payable for registration of licence for one year.

Licence fee once paid shall not be refundable under any circumstances.

(3) After verification for adjudging the suitability of premises, licence shall be granted

by Chief Inspector-cum-Facilitator or any other officer appointed under section 34

of the Code and specially empowered in this behalf by the Government, through

Portal, in Form-16.

(4) If the licence is not granted or no order is communicated to the applicant within

thirty days, then such licence shall be deemed to have been granted.

FEE SCHEDULE

(For Factories)

Horse Power

Installed

Maximum number of workers to be employed on any day during the year

Up

to

20

21 to 50 51

to

100

101

to

250

251 to

500

501 to

750

751 to

1000

Above

1000

Rs.

Rs.

Rs.

Rs.

Rs.

Rs.

Rs.

Rs.

Nil

200

500

1000

2500

4000

7500

10000

12500

Up to 10

500

1000

1200

3000

6000

9000

12000

15000

Above

10

and up to 50

1000

1500

2000

5000

10000 15000

20000

25000

Above

50

and up to 100

2000

2500

3000

7500

15000 22500

30000

37500

Above 100

3000

4000

5000

10000

20000 30000

40000

50000

(5) Any occupier or employer who is desirous of obtaining common under Section 119 in

respect of a factory and for engaging contract workers under section 48, shall make an

application in Form-22 and common shall be granted by the Chief Inspector-cum-

Facilitator in Form-23.

(6) The fee for issue of common licence shall be sum of fees as provided in Schedules of

fees under separate rules for factory and contract workers.

222

DELHI GAZETTE : EXTRAORDINARY

PART IV]

60

Renewal of factory licence under sub-section (1) of section 79.-

(1) Renewal of the licence shall be applied through Portal in Form-22 before thirty days

of expiry of the licence for a period of one, five or ten years. Licence fee shall be

the number of years multiplied by the fees payable for renewal of licence for one

year as per Fee Schedule provided under Rule 59. Licence fee once paid shall not

be refundable under any circumstances.

(2) If the application for renewal of licence along-with requisite fees is not received on

Portal thirty days before the date on which the licence expires, a late fee of twenty-

five per cent in excess of the fees for all corresponding lapsed years shall be

payable.

(3) Licence shall be renewed in Form-23 by the Chief Inspector-cum-Facilitator or any

other officer appointed under section 34 of the Code and specially empowered in

this behalf by the Government.

(4) If the licence is not renewed or no order is communicated to the applicant within

thirty days, then such licence shall be deemed to have been renewed.

(5) The fee for issue of common licence shall be calculated in accordance with

Schedules of fees as provided under separate rules for the combination of

establishments, for which the common licence is sought.

61

Amendment of factory licence under sub-section (1) of section 79. -

(1) A licence granted under rule 59 or renewed under rule 60 may be amended in Form-

23 by the Chief Inspector-cum-Facilitator or any other officer appointed under

section 34 of the Code in the following cases:

(i) Change in name of the factory;

(ii)

Change in address of the factory;

(iii)

Change in name of occupier;

(iv)

Change in constitution of factory;

(v) Change in number of workers;

(vi) Change in Horse power;

(vii) Change in manufacturing process.

(2) A licencee, who desires to have his licence amended, shall submit an application in

Form -22 on Portal.

(3) The fee for the amendment of a licence shall be five hundred rupees per amendment

plus the amount of difference of fee required as per Fee Schedule provided in Rule-

59.

(4) If the licence is not amended or no order is communicated to the applicant within

thirty days, then such licence shall be deemed to have been amended.

[PART IV

DELHI GAZETTE : EXTRAORDINARY

223

62

Suspension of factory licence under sub-section (1) of section 79.- The Chief

Inspector-cum-Facilitator may after giving the licencee concerned, reasonable

opportunity to show cause against the proposed action, suspend any licence, if he is

satisfied that the licence was obtained by the licencee through fraud or by

misrepresentation of facts or any other reason to be specified, and on such

suspension of licence, the licencee shall not be entitled to the refund of the licence

fee.

63

Liability of owner of premises in certain circumstances under section 80.-

Where in any premises, independent or self-contained, floors or flats are leased to

different occupiers for use as separate factories, the owner of the premises shall be

liable as if he were the occupier or manager of a factory, of any contravention of the

provisions of the Code in respect of-

(i) latrines, urinals and washing facilities in so far as the maintenance of the common

supply of water for these purposes is concerned;

(ii) fencing of machinery and plant belonging to the owner and not specifically

entrusted to the custody or use of an occupier;

(iii) safe means of access to the floors of flats, and maintenance and cleanliness of

staircases and common passages;

(iv) precautions in case of fire and provisions of alternate emergency staircase;

(v) maintenance of hoists and lifts; and

(vi) maintenance of any other common facilities provided in the premises.

64

Power to apply code to certain premises under sub-section (1) of section 81.-

The occupier of any premises, wherein the manufacturing process of Steel

Rerolling, Crushing of Stone or Chemical Works is so ordinarily carried, is required

to obtain the licence irrespective of no. of workers employed and such premises

shall constitute a ―Factory‖.

65

Dangerous operations under section 82.-

(1) The following operations when carried on in any factory are declared to be

dangerous operations:

(i)

Manufacture of aerated water and processes incidental thereto;

(ii)

electrolytic plating or oxidation of metal articles by use of an electrolyte containing

acids, bases or salts of metals such as chromium, nickel, cadmium, zinc, copper,

silver or gold;

(iii) manufacture and repair of electric accumulators;

(iv) glass manufacture;

(v)

grinding or glazing of metals;

(vi) manufacture and treatment of lead and certain compounds of lead;

(vii) generation of gas from dangerous petroleum;

224

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(viii) cleaning, smoothening or roughening etc. of articles by a jet of sand, metal shot, grit

or other abrasive propelled by a blast of compressed air of steam;

(ix) liming and tanning of raw hides and skins and processes incidental thereto;

(x)

carrying on certain processes of lead and lead material in Printing Press;

(xi) chemical works;

(xii) manufacture of pottery and ceramics;

(xiii) compression of Oxygen and Hydrogen produced by the electrolysis of water;

(xiv) manipulation of stone or any other material containing free silica;

(xv) handling and processing of asbestos, manufacture of any article of asbestos and any

other process of manufacture or otherwise in which asbestos is used in any form;

(xvi) handling and manipulation of corrosive substances;

(xvii) use of ovens and driers in factories;

(xviii) manufacture or Manipulation of Carcinogenic intermediates;

(xix) process extracting vegetable oils from oil cakes in solvent extraction plants;

(xx) manufacture or manipulation of manganese and its compounds;

(xxi) protection against hazards of poisoning arising from benzene;

(xxii) carbon disulphide plants;

(xxiii) operations involving high noise levels;

(xxiv) manufacture or manipulation of dangerous pesticides;

(xxv) manufacture of rayon by viscose;

(xxvi) highly flammable liquids and flammable compressed gases;

(xxvii) operation in foundries;

(xxviii) textile machinery except used in jute mills;

(xxix) process of melting in induction furnace;

(xxx) wood working machinery;

(xxxi) rubber mills;

(xxxii) centrifugal machines;

(xxxiii) power presses;

(xxxiv) shears, slitters and guillotine machines;

(xxxv) thermic fluid heaters;

(xxxvi) manufacture of chromic acid or manufacture or recovery of the bichromate of

sodium, potassium or ammonium; and

xxxvii) welding/cutting operation with the use of LPG/Acetylene/Argon.

(2) The provisions specified in the Schedules annexed hereto shall apply to such class

or description of factories wherein dangerous operations specified in each Schedule

are carried out.

(3) (a) For the medical examination of workers to be conducted by the ―Medical Officer

[PART IV

DELHI GAZETTE : EXTRAORDINARY

225

―as required by the Schedules annexed hereto, the occupier of the factory shall pay

fee at the rate of one hundred rupees per examination of each worker;

(b) The fee specified in clause (a) shall be exclusive of any charges for biological,

radiological or other tests which may have to be carried out in connection with the

medical examination. Such charges shall be payable by the occupier; and

(c) The fee is to be paid for medical examination shall be credited to the treasury in

the head of account or as may be specified by the Government from time to time.

(4) Notwithstanding anything contained in the Schedules annexed to this rule, the

Inspector-cum-Facilitator may issue order in writing to the occupier, directing him to

carry such measures, and within such time, as may be specified in such order with a

view to remove conditions dangerous to the health of the worker or to suspend any

process, where such process constitutes in the opinion of the Inspector-cum-

Facilitator imminent danger of poisoning or toxicity.

(5) Any register or record of medical examinations and tests connected therewith

required to be carried out, under any of the Schedule annexed hereto, in respect of

any worker, shall be kept readily available to the Inspector-cum-Facilitator and shall

be preserved till the expiry of a period of one year after the worker ceases to be in

employment of the factory.

66

Site Appraisal Committee under sub-section (1) of section 83.-

1. Constitution

The following provisions shall govern the functioning of the Site Appraisal

Committee (hereinafter referred to be as the ―Committee‖) in these rules, namely: -

(a) the Government shall constitute a Site Appraisal Committee and reconstitute the

committee under the Chairmanship of the Labour Commissioner, Delhi as and when

necessary;

(b) the Government shall appoint a senior officer from the Directorate of Industrial

Safety and Health, Labour Department, Delhi to be the Secretary of the Committee;

(c) the Government may appoint the following as members of the Committee:

(i)

a representative of the Fire Service Organization of the Government;

(ii) a representative of the Department of Industries, Delhi;

(iii) a representative of the Director General of Factory Advice Service and Labour

Institute, Mumbai;

(iv) a representative of the Department of Health; and

(v) the Government may nominate two persons having experience in the field of

226

DELHI GAZETTE : EXTRAORDINARY

PART IV]

occupational safety or environment protection.

2. No member, unless required to do so by a court of law, shall disclose otherwise than

in connection with the purposes of the Code, at any time any information relating to

the manufacturing or commercial business or any working process which may come

to his knowledge during his tenure as a Member of this Committee.

3. Applications for appraisal of site. -

(a) Applications for appraisal of sites in respect of the factories covered under clause

(za) of section 2 shall be submitted to the Chairman of the Site Appraisal

Committee; and

(b) The application for site appraisal along with fifteen copies thereof shall be

submitted in Form-26 The Committee may dispense with furnishing of information

on any particular item in the application form, if it considers the same to be not

relevant to the application under consideration.

4. Functions of the Committee.-

(a) The Secretary shall arrange to register the applications received for appraisal of site

in a separate register and acknowledge the same within a period of seven days;

(b) the Secretary shall fix up the meetings in such manner that all the applications

received and registered are referred to the Committee within a period of thirty days

from the date of their receipt;

(c) the Committee shall adopt a procedure for its working, keeping in view the need for

expeditious disposal of applications;

(d) the Committee shall examine the applications for appraisal of a site with reference

to the prohibitions and restrictions on the location of an industry and the carrying on

of processes and operations in different areas as per the provisions of different

departments given representation in the Committee; and

(e) the Committee may call for documents, examine experts, inspect the site if

necessary and take other steps for formulating its views with regard to the suitability

of the site.

5. Exemption.- The industrial project granted clearance under notification No. S.O.

1533 (E) dated 14.9.2006 under the Environmental (Protection) Act, 1986, issued

by the Government of India, Ministry of Environment and Forests, shall not be

required to get clearance from this Committee.

67

Compulsory disclosure of information under sub-section (1) of section 84.-

(1) The occupier of a factory carrying on a hazardous process shall supply to all

workers the following information in relation to the handling of hazardous materials

or substances in the manufacture, transportation, storage and other processes,

namely: -

(a) Requirements of section 84;

[PART IV

DELHI GAZETTE : EXTRAORDINARY

227

(b) A list of hazardous processes carried on in the factory;

(c) Location and availability of all Material Safety Data Sheets;

(d) physical and health hazards arising from the exposure to or handling of substances;

(e) measures taken by the occupier to ensure safety and control of physical and health

hazards;

(f) measures to be taken by the workers to ensure safe handling, storage and

transportation of hazardous substances;

(g) personal protective equipment required to be used by the workers employed in

hazardous process or dangerous operations;

(h) meaning of various labels and markings used in the containers of hazardous

substances;

(i) signs and symptoms likely to be manifested on exposure to hazardous substances

and to whom to report;

(j) measures to be taken by the workers in case of any spillage or leakage of a

hazardous substance;

(k) role of workers vis-à-vis the emergency plan of the factory in particular the

evacuation procedures; and

(l) any other information considered necessary by the occupier to ensure safety and

health of workers.

(2) The information required by sub-rule(1) shall be complied and made known to the

workers individually through supply of booklets of leaflets and display of

cautionary notices at the workplaces.

(3) The booklets, leaflets and the cautionary notices displayed in the factory will be in

the language understood by the majority of the workers and also explained to them.

(4) The Chief Inspector-cum-Facilitator may direct the occupier to supply further

information to the workers as may be deemed necessary.

68

Compulsory disclosure of information by the occupier under sub-section (1),

(2) and (5) of section 84.-

228

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(1) The Occupier of every factory carrying on "hazardous process" shall furnish

information related to hazards in writing within thirty days before the

commencement of such process to the Chief Inspector-cum-Facilitator and display

such information at a conspicuous place at workplace.

(2) A copy of compilation of Material Safety Data Sheets in respect of hazardous

substances used, produced, handled or stored in the factory shall be

developed/obtained in Form-27 and furnished to the Chief Inspector-cum-

Facilitator.

(3) The Occupier shall also furnish any other information asked for by the Chief

Inspector-cum-Facilitator from time to time for the purpose of this Code and these

rules.

(4) The occupier shall review once in every calendar year and modify, if necessary,

the information furnished under these rules to the workers, the Chief Inspector-cum-

Facilitator.

(5) The occupier shall disseminate the information regarding the precautions to be

taken about hazardous substances and hazardous processes of the factory to the

local authority in writing and to the general public residing in the vicinity through

public awareness programme and leaflets.

(6) In the event of any change in the process or operations or methods of worker

when any new substance is introduced in the process or in the event of a serious

accident taking place, the information furnished shall be reviewed and modified to

the extent necessary.

69

Health and Safety Policy.-

The occupier of every factory involving hazardous process shall prepare a Health

and Safety policy.

(1) The Health and Safety Policy shall contain or deal with, -

a. the declared intention and commitment of the top management to health, safety and

environment and compliance with all the relevant statutory requirements;

b. the organizational setup to carry out the declared policy clearly assigning the

responsibility at different levels; and

c. arrangements for making the policy effective.

(2) In particular, the policy shall specify the following, namely. -

a. The arrangements for involving the workers;

b. The intentions of taking into account the health and safety performance of workers

at different levels while considering their career advancement;

[PART IV

DELHI GAZETTE : EXTRAORDINARY

229

c. fixing the responsibility of the contractors, sub-contractors, transporters and other

agencies entering the premises;

d. providing a resume of health and safety performance of the factory in its annual

report;

e. relevant techniques and methods, such as safety audit sand risk assessment for

periodical assessment of the status on health, safety and environment and taking all

remedial measures;

f. stating its intentions to integrate health and safety in all decisions, including those

dealing with purchase of plant, equipment, machinery and materials as well as

selection and placement of personnel; and

g. arrangements for informing educating and training and retraining its own employees

at different levels and the public, wherever required.

(3) A copy of the declared Health and Safety Policy duly signed by the occupier shall be

made available to the Inspector-cum-Facilitator having jurisdiction over the factory

or to the Chief Inspector-cum-Facilitator.

(4) The policy shall be made widely known by. -

a. Making copies available to all workers including contract workers, apprentices,

transport workers and suppliers, etc.,

b. Displaying copies of the policy at conspicuous places, and

c. Any other means of communication.

(5) The occupier shall revise the Health and Safety Policy as often as may be

appropriate, but it shall necessarily be revised under the following circumstances. -

a. Whenever any expansion or modification having implications on health and safety of

persons at work is made; or

b. Whenever new substance(s) or articles are introduced in the manufacturing process

having implications on health and safety of persons exposed to such substances.

The occupier shall inform within thirty days of revised Health and Safety Policy to

the Inspector-cum-Facilitator having jurisdiction over the factory or to the Chief

Inspector-cum-Facilitator and the local authority.

70

Disclosure of information to general public under sub-section (4) of section 84.-

(1) The Occupier of every Major Accident Harard Installation, with the approval of

Chief-Inspector-cum-Facilitator, shall draw up an On-site Emergency Plan, and take

appropriate steps to inform the general public who are likely to be in the area which

may be affected by an accident. Such information shall include,-

230

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(i) Name of the factory and address where situated;

(ii) Identification, by name and position of the person giving the information;

(iii) Confirmation that the factory has approval from the Directorate of Industrial

Safety and Health

(iv) An explanation in simple terms of a hazardous process (es) carried on in the

premises;

(v) The common names of the hazardous substances used which could give rise to

an accident likely to affect them, with an indication of their principal harmful

characteristics;

(vi) Brief description of the measures to be taken to minimize the risk of such an

accident in compliance with its legal obligations under relevant safety statutes;

(vii) Salient features of the approved disaster control measures adopted in the

factory;

(viii) Details of the factory‘s emergency warning system for the general public;

(ix) General advice on the action, members of the public should take on hearing the

warning;

(x) Brief description of arrangements in the factory, including liaison with the

emergency services, to deal with the foreseeable accidents of such nature and to

minimize their effects; and

(xi) Details of where further information can be obtained.

(2) The occupier shall also supply any further information,-

(i) to general public as directed by the District Magistrate from time to time;

(ii) to the elected representatives of the general public on request .

(3) The occupier shall endeavour to enter an agreement with the District Magistrate

for the area, with in whose jurisdiction the factory is situated, for the District

magistrate to take appropriate steps to inform the general public outside the factory

who are likely to be affected by an accident as required in sub-rule (1).

(4) The information in sub-rule (1) shall be in English and in the language

understood by majority of the public in the vicinity.

71

Information on industrial wastes under sub-section (3) and (7) of section 84.-

The Occupier of every factory involving hazardous process, with the approval of

Chief-Inspector-cum-Facilitator, shall furnish the following details:

[PART IV

DELHI GAZETTE : EXTRAORDINARY

231

(1) The information furnished under rules 67 and 68 shall include the quantity of solid

and liquid wastes generated per day, their characteristics and the method of

treatment such as incineration of solid wastes, chemical and biological treatment or

liquid wastes, and arrangements for their final disposal.

(2) It shall also include information on the quality and quantity of gaseous waste

discharged through the stacks or other openings, and arrangements such as provision

of scrubbers, cyclone separators, and electrostatic precipitators or similar such

arrangements made for controlling pollution of the environment.

72

Medical examination of workers employed in hazardous process under section

85.-

(1) Workers employed in an hazardous process shall be medically examined by a

qualified medical practitioner in the following manner, namely :-

(a) once before employment, to ascertain physical fitness of the person to do the

particular job;

(b) once in a period of six months, to ascertain the health status of all the workers in

respect of occupational health hazards to which they are exposed; and in cases where

in the opinion of the qualified medical practitioner it is necessary to do so at a

shorter interval in respect of any worker; and

(c) the details of pre-employment and periodical medical examination carried out as

aforesaid shall be recorded in the health register in Form-05.

(2) No person shall be employed for the first time without a certificate of Fitness in

Form-24 granted by the qualified medical practitioner. If the qualified medical

practitioner declares a person unfit for being employed in any process covered under

sub-rule (1), such a person shall have the right to appeal to the Inspector-cum-

Facilitator who shall refer the matter to the Medical Officer whose opinion shall be

final in this regard. If the Inspector-cum-Facilitator himself is also a Medical

Officer, he may dispose of the application himself.

(3) Any finding of the qualified medical practitioner revealing any abnormality or

unsuitability of any person employed in the process shall immediately be reported

to the Medical Officer who shall in turn, examine the concerned worker and

communicate his findings to the occupier within thirty days. If the Medical Officer is

of the opinion that the worker so examined is required to be taken away from the

process for health protection, he will direct the occupier accordingly, who shall not

employ the said worker in the same process. However, the worker so taken away be

provided with alternate placement unless he is fully incapacitated in the opinion of

232

DELHI GAZETTE : EXTRAORDINARY

PART IV]

the Medical Officer in which case the worker affected shall be suitably rehabilitated :

Provided that the Medical Officer on his own may examine any worker when he

considers it necessary to do so for ascertaining the suitability of his employment in

the ‗hazardous process‘ or for ascertaining the health status of any worker.

(4) The workers taken away from employment in any process under sub-rule (2) may

be employed again in the same process only after obtaining the Fitness Certificate from

the Medical Officer and after making entries to that effect in the health register.

(5) An Inspector-cum-Facilitator may, if he deems it necessary to do so, refer a worker to

the Medical Officer for medical examination as required under sub-rule (1) or if he

is a Medical Officer himself, conduct such medical examination.

(6) The opinion of the Medical Officer in such a case shall be final. The fees required for

this medical examination shall be paid by the occupier

(7) The worker required to undergo medical examination under these rules and for any

medical survey conducted by or on behalf of the Central or the Government shall

not refuse to undergo such medical examination.

73

Qualifications, etc. of Supervisors under section 85 (b).- (1) All persons who are

required to supervise handling of hazardous substance shall possess the following

qualifications and experience;

(a) (i) A degree in chemistry or diploma in chemical engineering or technology with 5

years‘ experience; or

(ii) A master's degree in chemistry or a degree in chemical engineering or

technology with 2 years‘ experience.

The experience stipulated above shall be in process, operation and maintenance in

the chemical industry.

(b) The Chief Inspector-cum-Facilitator may require the supervisor to undergo training

in Health and Safety.

(2) The syllabus and duration of the above training and the organisations conducting

the training shall be approved by the Government in accordance with the guidelines

issued by the Director-General of Factory Advice Service and Labour Institutes.

74

Occupational Health Centers under section 85 (b).-

(1) In respect of any factory carrying on hazardous process, there shall be provided and

maintained in good order an Occupational Health Centre with the services and

facilities as per the scale laid down hereunder: -

(a) For factories employing up to fifty workers–

(i) The services of a qualified medical practitioner on retainer-ship basis to be notified

by the occupier. He will carry out the pre-employment and periodical medical

examination as stipulated in rule 72 and render medical assistance during any

[PART IV

DELHI GAZETTE : EXTRAORDINARY

233

emergency;

(ii) At least five persons trained in first-aid procedure amongst whom at least one shall

always be available during the working period; and

(iii) A fully equipped first-aid box.

(b) For factories employing fifty-one to two hundred workers: -

(i) An occupational health Centre having a room with a minimum floor area of fifteen

square meters with floors and walls made of smooth and impervious surface and

with adequate illumination and ventilation as well as equipment as per the Schedule

annexed to this rule;

(ii) A part- time qualified medical practitioner shall be the overall charge of the center

who shall visit the factory at least twice in a week and whose services shall be

readily available during medical emergencies;

(iii) One qualified and trained dresser-cum-compounder on duty throughout the working

period; and

(iv) A fully equipped first-aid box in all the departments.

(c) For factories employing above two hundred workers: -

(i) one full-time qualified medical practitioner for factories employing up to five

hundred workers and one more qualified medical practitioner for every additional

one thousand workers or part thereof;

(ii) an Occupational Health Centre having at least two rooms each with a minimum

floor area of fifteen square meters with floor and walls made of smooth and

impervious surface and adequate illumination and ventilation as well as equipment

as per the Schedule annexed to this rule.

(iii) There shall be one nurse, one dresser-cum-compounder and one sweeper-cum-ward

boy throughout the working period; and

(iv) The Occupational Health Centre shall be suitably equipped to manage medical

emergencies.

(2) The qualified medical practitioner required to be appointed under sub-rule(1) shall

have any recognized medical qualification as defined in the National Medical

Commission Act, 2019 (Central Act No. 30 of 2019) and should be enrolled on the

National Register as defined in clause(m) of section 2 or on the State Register as

defined in clause (v) of section 2of the afore said Act and should possess a certificate

of Training in industrial Health of minimum three months duration recognised by the

234

DELHI GAZETTE : EXTRAORDINARY

PART IV]

Government:

Provided that-

(i)

A person possessing a diploma in Industrial Health or equivalent shall not be

required to possess the certificate of training as aforesaid;

(ii)

The Chief Inspector-cum-Facilitator may, subject to such conditions as he may

specify, grant exemption from the requirement of this sub-rule, if in his opinion a

suitable person possessing the necessary qualification is not available for appointment;

and

(iii) in case of a person who has been working as qualified medical practitioner for a

period of not less than three years on the date of commencement of these rules, the

Chief Inspector-cum-Facilitator may, subject to the condition that the said person

shall obtain the aforesaid certificate of training within a period of three years, relax

the qualification.

(3) The syllabus of the course leading to the above certificate and the organisation

conducting the said course shall be approved by the Government in accordance with

the guidelines issued by the Director General, Factory Advice Service and Labour

Institute.

(4) The organisation approved by the Director General, Factory Advice Service and

Labour Institute for this course shall also be eligible to issue above certificate.

(5) Within one month of the appointment of a qualified medical practitioner, the occupier

of the factory shall furnish to the Chief Inspector-cum-Facilitator the following

particulars, namely:

(a) Name and address of the qualified medical practitioner;

(b) qualifications;

(c) experience, if any; and

(d) the sub-rule under which appointed.

SCHEDULE

Equipment for Occupational Health Centre in Factories.

1.

A glazed sink with hot and cold water always available

2.

A table with a smooth top at least 180 cm. x 105 cm.

3.

Means for sterilizing instruments.

4.

A couch.

5.

Two buckets or containers with close fitting.

6.

A kettle and spirits stove or other suitable means of boiling water.

[PART IV

DELHI GAZETTE : EXTRAORDINARY

235

7.

One bottle of spirits ammonia caromatics (120ml)

8.

Two medium size sponges.

9.

Two Kidney trays.

10. Four cakes of toilet, preferably antiseptic

11. Two glass tumblers and two wine glasses

12. Two clinical thermometers.

13. Two tea spoons.

14. Two graduated (120ml) measuring glasses.

15. One wash bottle (1000cc) for washing eyes.

16. One bottle (one litre) carboliclotion 1 in 20.

17. Three chairs.

18. One screen.

19. One electric hand torch.

20. An adequate supply of tetanus toxoid

21. Coramine liquid (60ml.).

22. Talets-Antihistaminic, antispasmodic (25 each)

23. Syringes with needles -2 cc, and 10 cc.

24. Two needle holders big and small.

27. One dressing for ceps

28. One scalpel.

29. One stethoscope.

30. Rubber bandage-pressure bandage.

31. Oxygen cylinder with necessary attachments.

32. One Blood Pressure apparatus,

33. One patellar Hammer.

34. One Peak-flow meter for lung function measurement.

35. One stomach wash set.

36. Any other equipment recommended by the Factory ―Medical Officer‖ according to

specific need relating to manufacturing process.

37. In addition–

(1) For factories employing 51 to 200 workers-

236

DELHI GAZETTE : EXTRAORDINARY

PART IV]

1.

Four plain wooden splints 900 mmx00 mmx6mm

2.

Four plain wooden splints 50 mm x 75 mm x 6mm.

3.

Two plain wooden splints 250 mm x 50 mm x 12 mm.

4.

One pair artery forceps.

5.

Injections-morphia, pethidine, atropine, adrenaline, coramine, novacan (2 each).

6.

One surgical scissors.

(2) For factories employing above 200 workers.

1.

Eight plain wooden splints 900 mm x 100 mm x 6 mm.

2.

Eight plain wooden splints 350 mm x 75 mm x 6 mm.

3.

Four plain wooden splints 250 mm x 50 mm x 12 mm.

4.

Two pairs artery forceps.

5.

Injections –morphia, pethadine, atropine, adrenaline, coramine, novacan (4each).

6.

Two surgical scissors.

75

Ambulance van under section 85 (c).-

1. In any factory carrying on hazardous process, there shall be provided and maintained

in good condition, a suitably constructed ambulance van equipped with items as per

sub-rule (2) and manned by a full- time Driver-cum-mechanic and helper trained in

first-aid for the purposes of transportation of serious cases of accidents or sickness.

The ambulance van shall not be used for any purpose other than the purpose

stipulated herein and will normally be stationed at or near to the Occupational Health

Centre Provided that a factory employing less than two hundred workers may make

arrangements for procuring such facility at short notice from nearby hospital or other

places, to meet any emergency.

2. The ambulance should have the following equipment:-

(a) General –

-- A wheeled stretcher with folding and adjusting devices; with the head of the

stretcher capable of being tilled upward;

-- Fixed suction unit with equipment;

-- Fixed oxygen supply with equipment;

-- Pillow with case, sheets, blankets, towels;

-- Emesis bag, bed Pan, urinal, glass

(b) Safety equipment –

-- Flares with life of thirty minutes;

[PART IV

DELHI GAZETTE : EXTRAORDINARY

237

-- Flood lights;

-- Flash lights, Fire extinguisher dry powder type;

-- Insulated gauntlets.

(c) Emergency care equipment-

(i) Resuscitation –

-- Portable suction unit, portable Oxygen units;

-- Bag-valve-mask, hand operated artificial ventilation unit;

-- Airways; -- Mouth gases; -- Trachestomy adoptors;

-- Short spine board; -- I. V. Fluids with administration unit;

-- B.P. manometer; -- Gugg; -- Stethoscope

(ii) Immobilization –

-- Long and short padded boards; -- Wire ladder splints;

-- Triangular bandage; -- Long and short spine boards.

(iii) Dressings –

-- Gauze pads – 4‖ x 4‖; -- Universal dressing 10‖ x 36‖;

-- Roll of aluminium foils; -- Adhesive tape of 3‖; -- Safety pins;

-- Bandage sheets; -- Burn sheet.

(iv) Poisoning –

-- Syrup of lpecae; -- Activated Charcoal pre-packeted in doses; -- Snake bite

kit;

-- Drinking water.

(v) Emergency Medicines –

-- As per requirement (under the advice of Medical Officer only).

76

Decontamination facilities under section 85.- In every factory carrying out

`hazardous process‘, the following provisions shall be made to meet emergency,

namely:-

(a) fully equipped first aid box;

(b) readily accessible means of water for washing, drenching clothing of workers as well as

for those who have been contaminated with hazardous and corrosive substances and

such means shall be as per the scale shown in the table below:-

Table

238

DELHI GAZETTE : EXTRAORDINARY

PART IV]

No. of persons employed

No. of drenching shower at

anytime

Up to 50

2

Between 51 to 100

3

101 to 200

3+1 for every 50 persons

thereafter

201 to 400

5+1 for every 50 persons

thereafter

401 and above

7+1 for every 50 persons

thereafter

(c) a sufficient number of eye wash bottles filled with distilled water or suitable liquid, kept

in boxes or cupboards conveniently situated and clearly indicated by a distinctive sign

which shall be visible at all times.

77

Making available health records to workers under section 85.-

(1)

The occupier of every factory carrying out hazardous process shall make accessible

the health records including the records of workers exposed to hazardous process or,

as the case may be, the medical records of any worker for his perusal under the

following conditions, namely:-

(a) once in every twelve months or immediately after the medical examination,

whichever is earlier;

(b) if the qualified medical practitioner or Medical Officer, as the case may be, is of the

opinion that the worker has manifested signs and symptoms of any notifiable

disease as specified in the Third Schedule to the Code;

(c) if the worker leaves the employment;

(d) if any one of the following authorities so direct :--

(i) the Chief Inspector-cum-Facilitator;

(ii) the Director General, Factory Advice Service and Labour Institutes.

(iii) the Health Authority of Central or Government;

(iv) the Competent Authority in relation to employee‘s Compensation;

(v) the Director, Employees State Insurance Corporation (Medical benefits); and

(2) A copy of the up-to-date health records including the record of worker‘s exposure to

hazardous process or, as the case may be, the medical records shall be supplied to

[PART IV

DELHI GAZETTE : EXTRAORDINARY

239

the worker on receipt of an application from him. X-ray plates and other medical

diagnostic reports may also be made available for reference to his medical

practitioner.

78

Permissible Levels in Factories under section 88.- Without prejudice to the

requirements in any other provisions in the Code or the rules made there under, the

requirements specified in the Schedule given below shall apply to all factories:-

SCHEDULE

1. Definitions: for the purpose of this schedule –

(a) ―mg/m3‖ means milligrams of a substances per cubic meter of air;

(b) ―mppcm‖ means million particles of a substance per cubic meter of air;

(c)

―ppm‖ means parts of Vapour or gas per million parts of air by volume at 25

degrees centigrade and 760 mm of mercury pressure;

(d)

―The time-weighted average concentration limit for a normal 8-hour

workday and a 40-hour work week to which nearly all workers may be repeatedly

exposed, day after day, without adverse effect.‖

Time weighted average

C1T1 + C2T2 + ………… CnTn

Concentration= ………………………………………..

T1 + T2 +. .......... ……………. Tn

Where C1 represents the concentration of the substance for duration T1 (in hours);

C2 represents the concentration of the substance for duration T2 (in hours); and

Cn represents the concentration of the substance for duration Tn (in hours).

(e)

―Work location‖ means a location in a factory at which a worker works or

may be required to work at any time during any shift on any day.

2. Limits of concentration of substances at work location: -

(1) The time weighted average concentration of any substance listed in table 1 or 2 of

the schedule, at any work location in a factory during any shift on any day shall not

exceed the limit of the permissible time weighted average concentration specified in

respect of that substance:

Provided that in the case of a substance mentioned in Table 1 in respect of

which a limit in terms of short-term maximum concentration is indicated, the

240

DELHI GAZETTE : EXTRAORDINARY

PART IV]

concentration of such a substance may exceed the permissible limit of the time

weighted average concentration for the substance for short periods not exceeding 15

minutes at a time, subject to the condition that-

(a) Such periods during which the concentration exceeds the prescribed time weighted

average concentration are restricted to not more than 4 per shift;

(b) the time interval between any two such periods of higher exposure shall not be less

than 60 minutes; and

(c) At no time the concentration of the substance in the air shall exceed the limit of

short-term maximum concentration.

(2) In the case of any substance given in Table 3, the concentration of the substance at

any work location in a factory at any time during any day shall not exceed the limit of

exposure for that substance specified in the table.

(3) In the cases where the word ―skin‖ has been indicated against certain substance

mentioned in Tables 1 and 3, appropriate measures shall be taken to prevent

absorption through cutaneous routes particularly skin, mucous membranes, and eyes

as the limits specified in these Tables are for conditions where the exposure is only

through respiratory tract.

(4) (a) In case, the air at any work location contains a mixture of such substances

mentioned in Table 1, 2 or 3, which have similar toxic properties, the time weighted

concentration of each of these substances during the shift should be such that when

these time weighted concentration divided by the respective permissible time

weighted average concentration specified in the above-mentioned tables, and the

fractions obtained are added together, the total shall not exceed unity.

C1+ C2+………………… Cn

___________________

L1+ L2……………………. Ln

Where C1, C2.......... Cn are the time weighted concentration of toxic substances

1,2------------, and n respectively, determined after measurement at work location;

And L1, L2…………Ln are the permissible time weighted average concentration of

the toxic substances 1, 2, and n respectively.

(b)

In case the air at any work location contains a mixture of substances, mentioned in

Table 1, 2, 3 and these do not have similar toxic properties, then the time weighted

concentration of each of these substances shall not exceed the permissible time

weighted average concentration specified in the above-mentioned tables, for that

[PART IV

DELHI GAZETTE : EXTRAORDINARY

241

particular substance.

(c)

The requirement in clauses (a) and (b) shall be in addition to the requirements in

paragraphs 2 (1) and 2(2).

3. Power to require assessment of concentration of substances.-

(1) An Inspector-cum-Facilitator may, by an order in writing, direct the occupier or

manager of a factory to get before any specified date, the assessment of the time

weighted average concentration at any work location of any of the substances

mentioned in Table 1,2 or 3 carried out.

(2) The results of such assessment as well as the method followed for air sampling and

analysis for such assessment shall be sent to the Inspector-cum- Facilitator within 3

days from the date of completion of such assessment and also a record of the same

kept readily available for inspection by an Inspector- cum-Facilitator.

4. Exemption.- If in respect of any factory or a part of a factory, the Chief Inspector-

cum-Facilitator is satisfied that, by virtue of the pattern of working time of the

workers at different work locations or an account of other circumstances, no worker is

exposed, in the air at the work locations, to a substance or substances specified in

Tables 1,2 or 3 to such an extent as is likely to be injurious to his health, he (the Chief

Inspector-cum-Facilitator) may by an order in writing, exempt the factory or a part of

the factory from the requirements in paragraph 2, subject to such conditions, if any, as

he may specify therein.

Table-1

Permissible level of exposure

Substance

Time-

weighted

average

concentrati

on

short-

term

maximum

concentrati

on

ppm

mg/m

3

ppm

mg/m3

Acetic acid

10 25

15 37

Acrolein

0.1 0.25

0.3

0.8

242

DELHI GAZETTE : EXTRAORDINARY

PART IV]

Aldrin-skin

-

0.25

- 0.75

Ammonia

25 18

35 27

Aniline-skin

2

10

5 20

Anisidine(o-p-isomer)-skin

2.1 0.5

- -

Arsenic and compounds

-

0.2

- -

Benzene

10 30

- -

Bromine

0.1 0.7

0.3

2

2-Butanone(methyl

ethyl)(ketone-mek)

200 590

300

885

n-Butyl lacetate

150 710

200

950

Secondary/ Tertiary Butyl Acetate

200 950

250

1190

Cadmium dust and salt (as cd)

-

0.05

- 0.2

Calcium

-

2

- -

Carbyl (sevin)

-

5

- 10

Carbofuran(furadan)

-

0.1

- -

Carbon disulfide-skin

2

60

30 90

Carbon mono oxide

50 55

400

440

Carbon tetra chloride-skin

10 65

20 130

Carbonyl chloride(Phosgene)

0.1 0.4

- -

Chlordane-skin

-

9.5

- 2

Chlorobenzene(Mono

Chlorobenzene)

75 350

- -

Chlorine

1

3

3 9

Bi-Chloromethyl Ether

0.001

-

- -

Chromic Acid and Chromates (as cr)

-

0.05

- -

Chromium sel Chromic, Chrmous

salts

-

0

.

0

5

-

-

Copper Fumes

-

0

.

2

-

-

Cotton Dust (raw)

-

0

.

0

2

-

-

Cresol,All Isomers-skin

5

2

2

-

-

[PART IV

DELHI GAZETTE : EXTRAORDINARY

243

Cynides (as cn) skin

-

5

-

-

Cynanogen

1

0

2

0

-

-

DDT(Dicholoro Diphenyl Trichloro-

Ethane)

-

1

-

3

Demton-skin

0.

0

1

0

.

1

0

.

0

3

0.3

Diazinon-skin

-

0

.

1

-

0.3

Dibutyl phthalate

-

5

-

10

Dichlorves (ddv)-skin

0.

1

1

0

.

3

3

Dieldrin-skin

-

0

.

2

5

-

0.7

5

Dinitrobenzene(all isomers)-skin

0.

1

5

1

0

.

5

3

Dinitrotuolene-skin

-

1

.

5

-

5

Diphenyl

0.

2

1

.

5

0

.

6

4

Endosulfam (thiodan)-skin

-

0

.

1

-

0.3

Endrin-skin

-

0

.

1

-

0.3

Ethyl acetate

4

0

0

1

0

0

0

-

-

Ethyl alcohol

1

0

0

0

1

9

0

0

-

-

244

DELHI GAZETTE : EXTRAORDINARY

PART IV]

Ethyl amine

6

0

1

8

-

-

Flourides

-

2

.

5

-

-

Fluorin

1

2

2

4

Hydrogen cynide-skin

1

0

1

1

1

5

16

Hydrogen Sulfide

1

0

1

5

1

6

27

Iron oxide fumes

-

5

-

10

Isoamyl acetate

1

0

0

5

2

5

1

2

5

655

Isoamyl alcohol

1

0

0

3

6

0

1

2

5

450

Isobutyl alcohol

5

0

1

5

0

7

5

225

Lead fumes and dust

-

0

.

1

5

-

0.4

5

Libdane-skin

-

0

.

5

-

1.5

Malathion-skin

-

1

0

-

-

Manganese fumes

-

1

-

1

Mercury

-

0

.

0

5

-

0.1

5

Mercury)alkyl compounds)skin

0.0

01

0

.

0

1

0.

0

0

3

0.0

3

Methyl alcohol(methanol)-skin

200

2

6

0

2

5

0

31

0

Methyl

celloply-skin(2-methoxy

ethanol)

25

8

0

3

5

12

0

Methyl isobutyl ketone-skin

100

4

1

1

2

51

0

[PART IV

DELHI GAZETTE : EXTRAORDINARY

245

0

5

Naphthalene

10

5

0

1

5

75

Nickel carbonyl

0.0

5

0

.

3

5

-

-

Nitric acid

2

5

4

10

Nitric oxide

25

3

0

3

5

45

Nitrobenzene-skin

1

5

2

10

Oil mist minerals

-

5

-

10

Parathion-skin

-

0

.

0

1

-

0.0

3

Phenel-skin

5

1

9

1

0

38

Phorate (thimet)-skin

-

0

.

0

5

-

0.2

Phosgene(Carbonyl Chloride)

0.1

0

.

4

1

1

Phosphine

0.3

0

.

4

1

1

Phasphorous(yellow)

-

0

.

1

-

0.3

Phasphorous pentachloride

-

1

-

3

Phasphorous trichloride

0.5

3

-

-

Picric acid-skin

-

0

.

1

-

0.3

Pyridine

5

1

5

1

0

30

Saline(silicontetrahydride)

0.5

0

.

7

1

1.5

246

DELHI GAZETTE : EXTRAORDINARY

PART IV]

Styrene monomer(phenylethylene)

100

4

2

0

1

2

5

52

5

Sulfur dioxide

5

1

3

-

-

Sulphuric acid

-

1

-

-

Toludine (toloul)-skin

100

3

7

5

1

5

0

50

0

O-Toludine

5

2

2

1

0

44

Trichloroethylene

100

5

3

5

1

5

0

80

0

Vinyl chloride

5

1

0

-

-

Welding fumes(nitrous oxide)

-

5

-

-

Xylene(o-m-p-isomers)-skin

100

4

3

5

1

5

0

65

5

TABLE–2

S.No

Substance

Permissible time average concentration

Silica

Crystalline

i

Quartz

1

in term of dust count=1060/( %

quartz+10) in mppcm

2

in term of respirable dust =10/(%

respirable quuartz+2) in mg/cubic metre

3

in iterm of total dust =30/(% quartz+3) in

mg/cubic metre

i

i

Cristobalite

half of the limit given against quartz

i

i

i

Tridmite

do

i

v

Silica fused

as for quartz

v

Tripoli

as for item(2) quartz

b

Amorphous

705 mppcm

[PART IV

DELHI GAZETTE : EXTRAORDINARY

247

2

Silicates having less than 1 % free silica by weight

(a) Asbestos fibres longer than 5 microns

(i) Amosite

0.5

Fibre/cubic

centimeter

(ii) Chrysetilc

2 Fibres /centrimeter

(iii) Crystobalite

0.2

Fibres/cubic

centimeter

(iv) other form

2 Fibre/cubic centimeer

(b) Mica

705 mppcm

(c) Mineral wool fibre

10 mg per cubic metres

(d)Porlite

1060 mppcm

(e) Portland cement

1060 mppcm

(f) Soapstone

705 mppcm

(g) Talc (notabeatiform)

785 mppcm

(h) Talc(fibrruous)

Same limits as for asbestos

(i) Tremelite

Same limits as for asbestos

3

Coal Dust

for airborne dust having

less

than

5%

silicon

dioxide by weight

2mg/m3

for airborne dust having

over 5% silicon dioxide

by weight

Same limit as prescribed by formulas in

item (2) against quartz.

TABLE–3

Substance

Permissible limit of exposure

ppm

mg/m3

Acetic anhydride

5

20

O-Dichlorobenzene

50

300

Formaldehyde

2

3

Hydrogen Chloride

5

7

Manganese

&

-

5

248

DELHI GAZETTE : EXTRAORDINARY

PART IV]

compounds(asMn)

Nitrogendioxide

5

9

Nitroglycerin-skin

0.2

2

Potassiumhydroxide

-

2

Sodiumhydroxide

-

2

-22,4,6–

Trinitrotoluene(TNT)

-

0.5

79

Appropriate authority for appeal under section 90. -An appeal presented under

section 90 shall lie to the Chief Inspector-cum-Facilitator, or in cases where the

order appealed against is an order passed by the Chief Inspector-cum-Facilitator, to

the Labour Commissioner, Delhi and shall be in the form of memorandum setting

forth concisely the grounds of objection to the order and shall be accompanied by a

copy of the order.

PART-VI

PLANTATION

80

Facility for workers in plantation under clause (a) sub-section (1) of section

92.-

1. Housing accommodation for workers.- Every employer shall provide for worker

and his family residing in a plantation, housing accommodation as near as possible

to the place of work.

2. Standard and specification of housing accommodation.- All housing

accommodation for workers in a plantation shall conform to such standards and

specifications as may be approved by the Government on the recommendation of

the Board constituted under section 17.

3 Sites for housing accommodation.-

(1) The housing accommodation shall be provided on dry well-drained land which is

consistent with the requirement regarding distance from the plantation, has supplies of

wholesome drinking water within a reasonable distance.

(2) Adequate lighting arrangements shall be provided in and around the area in which

housing accommodation is provided.

(3) The employer shall maintain in good condition the approach roads and paths to the

area where houses are located as also the sewers and drains in that area.

(4) The employer shall cause the vicinity of all houses to be kept clear of refuse and

excreta and the latrines and drains to be cleaned out daily and all refuse in or near

them to be collected, removed and disposed of hygienically.

(5) Adequate facilities of toilets with sewage disposal shall be ensured by the employer.

[PART IV

DELHI GAZETTE : EXTRAORDINARY

249

4. Maintenance of houses.-

(1) The employer shall, at his own expenses, maintain all houses provided for

accommodation of workers in a fit and safe condition and execute annual and such

other repairs as may be necessary from time to time.

(2) A worker occupying a house may, and an Inspector-cum-Facilitator appointed under

the Code shall, bring to the notice of the employer any defect in the condition of a

house which makes it dangerous to the health and safety of the worker. It shall be the

duty of the employer to rectify the same at the earliest.

(3) The employer shall get all the houses lime-washed at least once every year and all the

doors, windows and other wooden structure varnished or painted once in three

years. A record of dates on which lime-washing or painting was carried out shall be

maintained in a register.

(4) If any employer fails to comply with the requirements of sub -rules (1), (2) or (3), the

Chief Inspector-cum-Facilitator may cause repairs to be done and realize the cost

thereof from the employer as arrears of land revenue.

5. Accommodation to be rent free.- No rent shall be charged by an employer for

the housing accommodation provided to workers and their families residing in his

plantation.

6. Occupation of accommodation after termination of employment.-

1.

When a worker dies in the service of the employer, or retires, or goes on transfer, or

resigns or goes on leave or when his services are terminated, he or his family may

retain the house up to the period as detail below––

a. in the case of death, transfer, termination of service, retirement or resignation, a

period not exceeding two months;

b.

in the case of leave, for the period of leave; and

c. in the case where the discharge of a worker is disputed and the matter has been taken

to an Industrial Tribunal or Court, for so long as the case is not finally disposed of".

2.

If a worker fails to vacate the house on the expiry of the period mentioned above

and continues to occupy the same when no member of his family is working, he shall

be liable to pay to the employer such rent at a rate not exceeding ten percent of his

wages as may be fixed by the Chief Inspector-cum-Facilitator.

81

Crèche for Plantation Workers under clause (b) sub-section (1) of section 92.-

250

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(1) In every plantation wherein fifty or more workers are employed or were employed on

any day of the preceding twelve months, the employer shall provide and maintain

creche for the use of the children who are between the age of 2 and 6 years.

(2) Every crèche shall be conveniently accessible to the parents of the children

accommodated therein.

(3) There shall be not less than fifteen square feet of floor area for each child to be

accommodated in a crèche.

(4) The building in which the crèche is situated shall be of sound construction with a good

plinth.

(5) The plan of the crèche building shall be in accordance with the standard plan or

plans laid down by the Chief Inspector-cum-Facilitator.

(6) The crèche shall be furnished with suitable furniture such as cots to lie down,

benches to sit, a hammock for each child below the age of two years, etc., and

provided with toys and other play things as may be specified by the Chief Inspector-

cum-Facilitator with the prior approval of the Government.

(7) A suitably fenced and shady open-air play-ground shall be provided for the children.

(8) The employer shall appoint a woman as Crèche-in-charge to look after children

during the absence of their parents, who shall possess such qualifications and training as

may be approved by the Government.

82

Educational facilities for worker's children under clause (c) sub-section (1) of

section 92.- Every employer shall, if the number of workers children between the

ages of six and twelve in his plantation exceeds twenty-five, provide and maintain a

Primary School for imparting Primary education to the children:

Provided that an employer may not provide and maintain a Primary School if there is

one under the direct management of the Government or of any local body for

imparting free education to the children up to the primary or higher standard, with

enough seats to admit the children between the ages of six and twelve of the workers

in his plantation or within a distance of one kilometer from the place where workers

reside in his plantation.

Equipment in school.- The employer or employers, as the case may be shall provide

for every Primary School maintained under rule 134 such educational and other

equipment as may be considered necessary by the State Education Department.

Fee to be charged.- No fees shall be charged from the workers' children attending

the Primary School.

[PART IV

DELHI GAZETTE : EXTRAORDINARY

251

83

Benefit of sickness under clause (d) sub-section (1) of section 92.-

(1) Every worker shall be entitled to obtain sickness allowance from his employer for

each day of certified sickness for a total period of fourteen days in a year at the rate

of wages paid normally.

Provided however, that where under existing provisions under any law the sickness

allowance is higher, workers shall not, by the dint of this rule, be deprived of such

higher allowance.

(2) Sickness allowance specified in sub-rule (1) shall be paid at the option of the worker

either at the time of payment of weekly advances on account of wages or along with

the first installment of wages payable to the worker after he resumes his work on

recovery from certified sickness.

(3) The certificate of sickness shall be issued by the Medical Officer or qualified

medical practitioner appointed by the employer to every worker entitled to obtain

sickness allowance.

(4) No sickness allowance shall be paid to a worker if he attends to work on any day for

which he has been granted sickness allowance.

84

Recreational facilities under clause (e) sub-section (1) of section 92.-

(1) Every employer shall provide and maintain,-

(a)

recreation center to the scale of one for every one hundred and seventy-

five families of resident workers or part thereof with provision for a television with

dish connection and indoor games for workers and their families and such other

facilities, as may be specified by the Chief Inspector-cum-Facilitator, with prior

approval of the Government; and

(b)

a playground or playgrounds for workers and their families with necessary

sports equipment for out-door games:

(2) Every recreation center to be provided and maintained shall be conveniently situated as

near as possible to the worker‘s quarters.

85

(1) Safeguards for women and adolescent in using or handling hazardous

substances under subsection (2) and (3) of section 93.- No pregnant woman or

adolescent shall be allowed to handle any hazardous substance.

(2) Qualifications to supervise the use, handling, storage and transportation of

insecticides, chemicals and toxic substances in the plantation of the employer.-

For the purposes of sub-section (3) of section 93, no person shall be appointed by an

252

DELHI GAZETTE : EXTRAORDINARY

PART IV]

employer unless such person is,-

(i)

in possession of B.Sc. in Chemistry or Agriculture;

(ii) able to speak and understand the language of workers; and

(iii) having an experience of three years in such field.

86

Safety measures and safe work practices under sub-section (4) of section 93.-

The following safety measures and safe work practices with respect to the location,

security and access to storage of insecticides, chemicals and toxic substances shall

be ensured by the employer, namely:-

(a) the store or storage area shall be separate from other buildings, dwellings, storage

of foodstuffs;

(b) accidental or unauthorized access to the storage area shall be prevented;

(c) the store shall be kept locked and fitted with a child proof latch to prevent risks to

children, visitors to the workplace, and members of the public who are not familiar

with the hazards of insecticides, chemicals and toxic substances;

(d) adequate natural or mechanical ventilation shall be provided;

(e) impervious floors with drainage into a sump concrete door sills concrete or block

walls to a sufficient height to contain spills impervious shelving;

(f) the walls (or bund) and door sill shall be high enough to contain a spillage of

twenty-five per cent of the total volume of packaged liquid pesticides;

(g) provision shall be made for drainage of spills and clean up water into a sump or pit

that can contain the insecticides, chemicals and toxic substances, clean up materials

and the wash water;

(h) supply of wash water shall be made readily available;

(i) good natural cross-flow ventilation shall be provided with vents in opposite walls,

above bund height;

(j) substances shall be stored at a cool temperature to prevent deterioration; an

(k) the products shall be protected from moisture so that packaging and labeling does

not deteriorate.

87

Medical examination and health record of plantation workers under sub-

section (5) of section 93.-

(1) Every worker employed in a plantation, who is exposed to insecticides, pesticides,

chemicals and toxic substances shall be medically examined by a qualified medical

practitioner in the following manner, namely:-

(i) once before employment, to ascertain physical fitness of the person to do the

particular job;

(ii) once in a period of twelve months, to ascertain the health status of all the workers in

[PART IV

DELHI GAZETTE : EXTRAORDINARY

253

respect of occupational health hazards to which they are exposed; and

(iii) the details of pre-employment and periodical medical examination carried out as

aforesaid shall be recorded in the health register in Form-05.

(2) No person shall be employed for the first time without a certificate of Fitness in

Form-24 granted by the qualified medical practitioner. If the qualified medical

practitioner declares a person unfit for being employed, such a person shall have the

right to appeal to the Inspector-cum-Facilitator who shall refer the matter to the

Medical Officer whose opinion shall be final in this regard.

(3) Any finding of the qualified medical practitioner revealing any abnormality or

unsuitability of any person employed shall immediately be reported to the Medical

Officer who shall in turn, examine the concerned worker and communicate his

findings to the employer within thirty days. If the Medical Officer is of the opinion

that the worker so examined is required to be taken away from the employment for

health protection, he will direct the employer accordingly, who shall not employ the

said worker in the same employment. However, the worker so taken away shall be

provided with alternate placement unless he is fully incapacitated in the opinion of the

Medical Officer in which case the worker affected shall be suitably rehabilitated.

(4) The workers taken away from employment under sub-rule (3) may be employed

again in the same employment only after obtaining the Fitness Certificate from the

Medical Officer and after making entries to that effect in the health register.

(5) A copy of the up-to-date health records including the record of worker's exposure

to insecticides, pesticides, chemicals and toxic substances or, as the case may be, the

medical records shall be supplied to the worker on receipt of an application from him.

X-ray plates and other medical diagnostic reports may also be made available for

reference to his qualified medical practitioner.

88

Washing, bathing and cloak-room facilities to plantation workers under clause

(a) sub-section (7) of section 93.-

(1) There shall be provided and maintained in every plantation for the use of all the

workers taps for washing, at the rate of one for every fifteen persons including

liquid soap in a container with tilting arrangements and nail brushes or other suitable

means for effective cleaning. Such facilities shall be conveniently accessible and

shall be kept in a clean and hygienic condition.

(2) If washing facilities as required above are provided for women, such facilities shall be

separate for them and adequate privacy at all times shall be ensured in such facilities.

(3) Every employer of a plantation where the workers engaged therein are handling

insecticides, pesticides, chemicals and toxic substances and fifty workers or more

254

DELHI GAZETTE : EXTRAORDINARY

PART IV]

are employed, shall provide for all the workers working in a shift, mess room

facilities which are well ventilated and provided with tables and sitting facilities along

with the provision of cold and hygienic drinking water facilities.

(4)

The facilities mentioned in sub-rule (3) shall include suitable arrangements for

cleaning and washing and shall be maintained in a clean and hygienic condition.

(5)

Every employer of a plantation where the workers engaged therein are handling

insecticides, pesticides, chemicals and toxic shall provide for cloak room facilities

with lockers. Each worker shall be provided with two lockers, one for work clothing

and another separately for personal clothing and the lockers should be such as to

enable the keeping of the clothing in a hanging position.

(6)

The cloak room facilities provided under sub-rule (5) shall be located, as far as

possible, near to the facilities provided for washing under sub-rule (1). If it is not

possible to locate the washing facilities near to the cloakroom, then the cloakroom

shall have adequate and suitable arrangements for cleaning and washing.

89

Protective clothing and equipment to plantation workers under clause (b) sub-

section (7) of section 93.- When choosing Personal Protective Equipment in

accordance with the label, Material Safety Data Sheet and risk assessment, the

following items shall be considered, namely:-

(a) cotton overalls buttoned to the neck and wrist;

(b) pesticide resistant water-proof aprons when mixing or pouring concentrate;

(c) gloves (pesticide resistant), preferably gauntlets, to be worn when handling or using

chemicals;

(d) a wide brim washable hat; if contaminated, the hat should be removed immediately

and washed before re-use;

(e) boots such as rubber or Polyvinyl chloride; waterproof leggings providing

additional protection, leather boots which can absorb pesticide and prevent exposure

during high volume applications;

(f)

face shield or splash proof goggles when mixing or pouring;

(g) goggles and appropriate approved respirator, especially if exposure to spray drift is

likely; and

(h) full face air -line respirator when working in enclosed spaces, depending on the

label and Material Safety Data Sheet self- contained breathing apparatus for entry

into confined spaces.

90

Precautionary notices in plantation under sub-section (9) of section 93.-

Precautionary notice in the form specified below and printed in the language of the

[PART IV

DELHI GAZETTE : EXTRAORDINARY

255

majority of the workers employed shall be affixed in a prominent place in the

plantation where it can be easily and conveniently read by the workers.

PRECAUTIONARY NOTICE

1.

Chemicals handled in this plantation are hazardous.

2.

Smoking, chewing tobacco, eating food or drinking, in this area is prohibited.

3.

No food stuff or drink shall be brought in this area.

4.

Some of these chemicals may be absorbed through the skin and may cause

poisoning.

5.

A good wash shall be taken before meals.

6.

Protective devices supplied shall be used while working in this area.

7.

Spillage of the chemicals on any part of the body or on the floor shall be immediately

washed away with water.

8.

All workers shall report for the prescribed medical tests regularly to protect their

own health.

CHAPTER-X

OFFENCES AND PENALTIES

91

Appellate Authority and manner of appeal under sub-section (3) of section 111.

- An appeal shall be accompanied by a fee at the rate of two percent of the penalty

imposed under sub-section (2) of section 111 of the Code, which shall be paid

through the online portal in Form-28.

92

Manner of compounding of offences by the authorized officer specified under

sub-section (1) of section 114.- (1) The officer notified by the Government for the

purposes of compounding of offences under sub-section (1) of section 114 shall

issue electronically or otherwise a compounding notice for the offences which are

compoundable under section sub-section (1) of section 114.

(2) The person so noticed may apply to the officer electronically or otherwise and

deposit the entire compounding amount by electronic transfer or otherwise, within

fifteen days of the receipt of the notice.

(3) The Compounding Officer shall issue a composition certificate within ten days of

receipt of the composition amount, to such person from whom such amount has been

received in satisfaction of the composition notice.

(4) If a person so noticed fails to deposit the composition amount within the one

months before the institution of prosecution, the prosecution shall be proceeded with

256

DELHI GAZETTE : EXTRAORDINARY

PART IV]

before the competent Court.

CHAPTER-XI

Social security fund

93

Social security fund under sub-section (2) of section 115.-

(1) The amount received from composition of the offence as specified in sub-section

(4) of section 114 and the amount of the penalty as specified in sub-section (6) of

section 111 of the Code, shall be credited to the Delhi Unorganised workers Social

Security Fund established under sub-section (5) of section 141 of the Social Security

Code 2020 (Central Act 36 of 2020).

(2) The fund shall be expended for the Welfare of the Unorganised Workers, under

the Social Security Schemes framed under section 109 of the Social Security Code

2020 and the rules made thereunder.

By Order and in the Name of the Lt. Governor

of the National Capital Territory of Delhi,

ASHOK KUMAR, Secy. (Labour)

SCHEDULE FOR DANGEROUS OPERATIONS

(Safety, Welfare amenities, Protective Equipment and Medical Examinations etc.)

[See Rule 65]

SCHEDULE-I

MANUFACTURE OF AERATED WATERS AND PROCESSES INCIDENTAL

THERETO

1.

Fencing of machines. – All machines for filling bottles or syphons shall be so constructed,

placed or fenced, as to prevent, as far as may be practicable, a fragment of a bursting bottle or

syphon form striking any person employed in the factory.

2.

Face guards and gauntlets.–

(1)

The occupier shall provide and maintain in good condition for the use of all persons

engaged in filling bottles or siphons: -

(a)

suitable face guards to protect the face, neck and throat; and

[PART IV

DELHI GAZETTE : EXTRAORDINARY

257

(b)

suitable gauntlets for both arms to protect the whole hand and arms Provided that:-

(i)

paragraph 2(1) shall not apply where bottles are filled by means of an automatic machine

so constructed that no fragment of a bursting bottle can escape.

(ii)

Where a machine is so constructed that only one arm of the bottler at work up to it is

exposed to danger, a gauntlet need not be provided for the arm which is not exposed to danger.

(2) The occupier shall provide and maintain in good condition for the use of all persons engaged in

corking, crowning, screwing, wiring , foiling, capsuling, sighting or labelling bottles or syphons –

(a)

Suitable face-guards to protect the face, neck and throat; and

(b)

Suitable gauntlets for both arms to protect the arm and at least half of the palm and the

space between the thumb and forefinger.

(3) Wearing of face guards and gauntlets. – All persons engaged in any of the processes specified

in paragraph 2 of this schedule shall, while at work in such processes, wear the face guards and

gauntlets provided under the provisions of the said paragraph.

SCHEDULE-II

ELECTROLYTIC PLATING OR OXIDATION OF METAL ARTICLES BY USE OF AN

ELECTROLYTE CONTAINING ACIDS, BASES OR SALTS OF METALS SUCH AS

CHROMIUM, NICKEL, CADMIUM, ZINC, COPPER, SILVER, GOLD ETC.

1.

Definitions – For the purposes of this Schedule –

(a) ―electrolytic process‖ means the electrolytic plating or oxidation of metal articles by the use of

an electrolyte containing acids ,bases or salts of metals such as chromium, nickel, cadmium, zinc,

copper, silver, gold, etc.

(b) ―bath‖ means any vessel used for an electrolytic process or for any subsequent process;

and

(c) ―Employed ―means employed in any process involving contact with liquid from a bath.

2.

Exhaust draught- (1)An efficient exhaust draught shall be applied to every vessel in which

an electrolytic process is carried on. Such draught shall be provided by mechanical means and shall

operate on the Vapour or spray given off in the process as near as may be at the point of origin. The

exhaust draught appliance shall be so constructed, arranged and maintained as to prevent the

Vapour or spray entering into any room or place in which work is carried on.

(2)

All equipment for extraction or suppression of the dust shall at least once in every six

months be examined and tested by a competent person, and any defect disclosed by such

examination and test shall be rectified as soon as possible.

258

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(3)

A register containing particulars of such examination and test shall be kept in Form No.

26

3.

Prohibition relating to pregnant women and adolescent – No pregnant women or

adolescent shall be employed or permitted to work at a bath.

4.

Floor of workrooms – The floor of every workroom containing a bath shall be

impervious to water. The floor shall be maintained in good and level condition and shall be

washed down at least once a day.

5. Protective devices –

(1)

The occupier shall provide and maintain in good and clean condition the following articles

of protective devices for the use of all persons employed on any process at which they are liable to

come in contact with liquid from a bath and such devices shall be worn by the persons concerned

(i)

waterproof aprons and bibs; and

(ii)

for persons actually working at a bath, loose fitting rubber gloves and rubber boots or

other waterproof footwear, and chemical goggles.

(iii)

The occupier shall provide and maintain for the use of all persons employed suitable

accommodation for the storage and drying of protective devices.

6.

Water facilities –

(1)

There shall be provided and maintained in good repairs for the use of all persons employed

in electrolytic process and processes incidental to it-

(a)

a wash place under cover, with either-

(i)

a trough with a smooth impervious surface filled with a waste pipe , and of sufficient length

to allow at least 60 CMS for every 5 persons employed at any one time, and having a constant

supply of water from taps or jets above the trough at intervals of not more than 60 CMS, or

(ii)

at least one wash basis for every five such persons employed at any one time, fitted with a

waste pipe and having a constant supply of water laid on.

(iii)

a sufficient supply of clean towels renewed daily, and soap or other suitable cleaning material.

(2)

In addition to the facility in sub-paragraph 1, an approved type emergency shower with eye

fountain shall be provided and maintained in good working order. Whenever necessary, in order to

ensure continuous water supply, storage tank of 1500 liters capacity shall be provided as a source

of clean water for emergency use.

7.

Cautionary placard – A cautionary placard in the form specified below and printed in the

language of the majority of the workers employed shall be affixed in a prominent place in the

factory where it can be easily and conveniently read by the workers.

CAUTIONARY NOTICE

(Electrolytic Plating)

[PART IV

DELHI GAZETTE : EXTRAORDINARY

259

(i)

Chemicals handled in this plant are corrosive and poisonous.

(ii)

Smoking, chewing tobacco, eating food or drinking, in this area is prohibited. No food

stuff or drink shall be brought in this area.

(iii)

Some of these chemicals may be absorbed through the skin and may cause poisoning.

( iv)

A good wash shall be taken before meals.

(iv)

Protective devices supplied shall be used while working in this area.

(vi)

Spillage of the chemicals on any part of the body or on the floor shall be immediately

washed away with water.

(vii)

All workers shall report for the prescribed medical tests regularly to protect their own

health.

8.

Medical examination by the Medical officer – (1) Every worker employed in the

electrolytic processes shall be examined by a Medical officer before his first employment Such

examination shall include X-ray of the chest and –

(a)

in case of chromium plating include examination for nasal septum perforation and test for

chromium in urine

(b)

in case of nickel platting, test for nickel in urine; and

(c)

in case of cadmium plating, test for cadmium in urine and -2 macroglobulin in urine.

(2)

No worker shall be employed in any electrolytic process unless certified fit for such

employment by the Medical officer.

(3)

Every worker employed in the electrolytic processes shall be re-examined by a Medical

officer at least once in every year, except in case of the workers employed in cadmium, chromium

and nickel-plating processes for whom this examination shall be carried our once in every six months.

Such re-examination shall, wherever the Medical officer considers appropriate, include tests as

specified under sub-paragraph (1) excluding the X-ray of the chest which shall not be required

normally to be carried out earlier than once in three years.

(4)

The medical officer after examining a worker, shall issue a Certificate of Fitness in Form-

24. The record of examination and re-examinations carried out shall be kept in the custody of the

occupier of the factory. The record of each examination carried out under sub-paragraphs (1) and

(2) including the nature and the results of the tests, shall also be entered by the Medical Officer in a

health register in Form-05.

(5)

The certificate of fitness and the health register shall be kept readily available for

inspection by the Inspector-cum-Facilitator.

(6)

If at any time the Medical officer is of the opinion that a worker is no longer fit for

employment in the electrolytic processes on the ground that continuance therein would involve

260

DELHI GAZETTE : EXTRAORDINARY

PART IV]

danger to the health of the worker, he shall make a record of his findings in the said certificate and

the health register. The entry of his findings in those documents should also include the period

for which he considers that the said person is unfit for work in the said processes. The person

declared unfit in such circumstances shall be provided with alternate placement facility unless he is

fully incapacitated in the opinion of the Medical officer in which case the person affected shall be

suitably rehabilitated.

(7)

No person who has been found unfit to work as said in sub-paragraph (6) shall be re-

employed or permitted to work in the said processes unless the Medical officer after further

examination, again certifies him fit for employment in these processes.

SCHEDULE-III

MANUFACTURE AND REPAIR OF ELECTRIC ACCUMULATORS

1.

Savings – This schedule shall not apply to the manufacture or repair of electric

accumulators or parts thereof not containing lead or any compound of lead; or to the repair on the

premises, of any accumulator forming part of a stationary battery.

2.

Definitions – For the purposes of this schedule –

(a)

―Lead process‖ means the melting of lead or any material containing lead, casting,

pasting, lead burning, or any other work, including trimming, or any other abrading or cutting of

pasted plates, involving the use, movement or manipulation of or contact with, any oxide of lead;

(b)

―manipulation of raw oxide of lead‖ means any lead process involving any manipulation

or movement of raw oxides of lead other than its conveyance in a receptacle or by means of an

implement from one operation to another;

3.

Prohibition relating to pregnant women and Adolescent – No pregnant women or

adolescent shall be employed or permitted to work in any lead process or in any room in which the

manipulation of raw oxide of lead or pasting is carried on.

4.

Separation of certain processes – Each of the following processes shall be carried on in

such a manner and under such conditions as to secure effectual separation from one another , and

from other processes :-

a.

manipulation of raw oxide of lend;

b.

pasting;

c.

drying of pasted plates;

d.

formation with lead turning (tacking)necessarily carried on in connection therewith ;

e.

melting down of pasted plates.

5.

Air space – In every room in which a lead process is carried on, there shall be at least

14.2 cubic meters of air space for each person employed therein, and in computing this air space

no height over 3.75 meters shall be taken into account.

[PART IV

DELHI GAZETTE : EXTRAORDINARY

261

6.

Ventilation – Every workroom shall be provided with inlets and outlets of adequate size as

to secure and maintain efficient ventilation in all parts of the room.

7.

Distance between workers in pasting room – In every pasting room the distance

between the center of the working position of any paster and that of the paster working nearest to

him shall not be less than 1.5 meters.

8.

Floor of workrooms –

(1)

The floor of every room in which lead process is carried on shall be –

(a)

of cement or similar material so as to be smooth and impervious to water;

(b)

maintained in sound condition; and

(c)

kept free from materials, plant, or other obstructions not required for, or produced in, the

process carried on in the room.

(2)

In all such rooms other than grid casting shops the floor shall be cleansed daily after being

thoroughly sprayed with water at a time when no other work is being carried on in the room.

(3)

In grid casting shops the floor shall be cleansed daily.

(4)

Without prejudice to the requirements of sub-paragraphs (1), (2) and (3), where

manipulation of raw oxide of lead or pasting is carried on, the floor shall also be

(a)

kept constantly moist while work is being done;

(b)

provided with suitable and adequate arrangements for drainage; and

(c) Thoroughly washed daily by means of hose pipe.

9.

Work-benches – The work-benches at which any lead process is carried on shall –

(i)

have a smooth surface and be maintained in sound condition

(ii)

be kept free from all materials or plant not required for, or produced in the process carried

out there at, and all such work-benches other than those in grid casting shops shall be;

(a)

cleaned daily either after being thoroughly damped or by means of suction cleaning apparatus

at the time when no other work being carried on there at and

(b)

all such work-benches in grid casting shops shall be cleaned daily;

(iii)

every work-bench used for pasting shall-

(a)

be covered throughout with sheet lead and other impervious material;

(b)

be provided with raised edges;

(c)

be kept constantly moist while pasting being carried on.

10.

Exhaust draught-

(1) The following provisions shall not be carried on without the use of an efficient exhaust

262

DELHI GAZETTE : EXTRAORDINARY

PART IV]

draught:-

(a)

Melting of lead or material containing lead.

(b)

Manipulation of raw oxide of lead unless done in an enclosed apparatus so as to

prevent the escape of dust into work-room.

(c)

Pasting

(d)

Trimming, brushing, filing or any other abrading or cutting or pasted plates giving rise to dust.

(e)

Lead burning other than-

(i)

―tacking‖ in the formation room

(ii)

Chemical burning for making of lead linings for cell cases carried on in such a manner that

the application of efficient exhaust is impracticable.

Such exhaust draught shall be affected by mechanical means and shall operate on the dust or

fume given off as nearly as may be at the point of reason so as to prevent it entering the air of

any room in which persons works.

(2)

All equipment for extraction or suppression of the dust shall at least once in every six

months be examined and tested by a competent person, and any defect disclosed by such

examination and test shall be rectified as soon as possible.

(3)

A register containing particulars of such examination and test shall be kept in Form No.

26

11. Fumes and gasses from melting pots – The products of combustion produced in the

heating of any melting pot shall not be allow to escape into a room in which persons work .

12. Containers for dross – A suitable receptacle with tightly fitting cover shall be provided and

used for dross as it is removed from every melting pot. Such receptacle shall be kept covered

while in the work room accept when dross is being deposited therein.

13. Container for lead waste – A suitable receptacle shall be provided in every workroom in

which old plates and waste material which may give rise to shall be deposited.

14. Racks and shelves drying room – The racks and shelves provided in any drying room shall

not be more than 2.4 m from the floor and not more than 60 cm in width provided that as regards

racks or shelves set or drawn from both sides the total width shall not exceed 1.2 m .

Such racks and shelves shall be cleaned only after being thoroughly damped unless so efficient

suction cleaning apparatus is used for this purpose.

15. Medical examination by the Medical officer –

(1)

Every worker employed in a lead processes shall be examined by a Medical officer within

15 days of his first employment. Such examination shall include test for lead in urine and blood,

ALA in urine, hemoglobin content, stippling of cells and steadiness test. No worker shall be

allowed to work after 15 days of his first employment in the factory unless certified fit for such

[PART IV

DELHI GAZETTE : EXTRAORDINARY

263

employment by the Medical officer.

(2)

Every worker employed in the said processes shall be re-examined by a Medical officer at

least once in every 3 calendar months and such re- examination shall, wherever the Medical officer

considers appropriate, include tests specified in subparagraph(1) .

(3)

The Medical officer after examining a worker, shall issue a Certificate of Fitness in Form-

24. The record of examination and re-examinations carried out shall be entered in the Certificate

and the Certificate shall be kept in the custody of the occupier of the factory. The record of each

examination carried out under sub paragraphs (1) and (2), including the nature and the results of the

tests, shall also be entered by the Medical officer in a health register in Form- 25.

(4)

The Certificate of Fitness and the health register shall be kept readily available for

inspection by the Inspector-cum-Facilitator.

(5)

If at any time the Medical officer is of the opinion that a worker is no longer fit for

employment in the said processes on the ground that continuance therein would involve special

danger to the health of the worker he shall make record of his findings in the said certificate and

the health register. The entry of his findings in those documents should also include the period for

which he considers that the said person is unfit for work in the said processes.

(6)

No person who has been found unfit to work as said in sub-paragraph (5) shall be re-

employed or permitted to work in the said processes unless the Medical officer, after further

examination, again certifies him fit for employment In those processes.

16. Protective clothing- protective clothing shall be provided and maintained in good condition for

all person employed in-

(a)

Manipulation of raw oxide of lead

(b)

Pasting

(c) The formation room and such clothing shall be worn by the person concerned.

The protective clothing shall consist of a water-proof apron and water- proof footwear; and

also, as required persons employed in the manipulation of raw oxide of lead or in the pasting the

head covering shall be washed daily.

17.

Mess room – There shall be provided and maintained for the use of all persons employed

in a lead process and remaining on the premises during the meal intervals, a suitable mess room

which shall be furnished with sufficient tables and benches. The mess room shall be

placed under the charge of a responsible person and shall be kept clean.

18.

Cloak room- there shall be provided and maintained for the use of all persons employed

in a lead process-

(a)

a cloak room for clothing put-off during working hours with adequate arrangements for

264

DELHI GAZETTE : EXTRAORDINARY

PART IV]

drying the clothes, if wet. Such accommodation shall be separate from mess room.

(b)

separate and suitable arrangements for the storage of protective clothing provided as per

sub-rule (16)

19.

Washing facilities – (1) There shall be provided and maintained in a cleanly state and in

good repair for the use of all persons employed in a lead process –

(a)

a wash place with either –

(i)

a trough with a smooth impervious surface fitted with a waste pipe without plug, and of

sufficient length to allow at least 60 centimeters for every five such persons employed at any one

time, and having a constant supply of water from taps or jets above the trough at intervals of not

more than 60 centimeters; or

(ii)

at least one wash basin for every five such persons employed at any one time, fitted with a

waste pipe and plug and having an adequate supply of water laid on.

(iii)

a sufficient supply of clean towels made of suitable materials renewed daily, which supply

in case of pasters and person employed in manipulation of raw oxide of lead shall include a

separate marked towel for each worker; and

iv) a sufficient supply of soap or other suitable cleansing material and of nail brushes.

(b)

There shall in addition be provided means of washing in close proximity to the rooms in

which manipulation of raw oxide of lead or pasting is carried on if required by notice in writing from

the Chief Inspector-cum-Facilitator.

20. Time allowed for washing – Before each meal and before the end of the day‘s work, at

least ten minutes, in addition to the regular meal times, shall be allowed for washing to each person

employed in the manipulation of raw oxide of lead or in pasting.

Provided that if there is one basin of 60 centimeters of trough for each such person, this

paragraph shall not apply.

21. Facilities for bathing- sufficient bath accommodation to the satisfaction of the Chief

Inspector-cum-Facilitator shall be provided to all the persons engaged in manipulation of raw

oxide of lead or in pasting and a sufficient supply of soap and clean towels.

22. Foods, drinks etc. Prohibited in work-rooms- no food, drink, pan and supari or tobacco

shall be consumed or brought by any worker into any work-room in which any lead process is

carried on.

SCHEDULE-IV

GLASS MANUFACTURE

1.

Exemption- If the Chief Inspector-cum-Facilitator is satisfied in respect of any factory or

any class of process that, owing to the special methods of work or the special conditions in a

factory or otherwise, any of the requirements of this schedule can be suspended or relaxed without

danger to the persons employed therein, or that the application of this schedule or any part thereof

[PART IV

DELHI GAZETTE : EXTRAORDINARY

265

is for any reason impracticable, he may be certificate in writing authorize such suspension or

relaxation as may be indicated in the certificate for such period and on such conditions as he may

think fit.

2.

Definitions – For the purpose of this schedule –

(a)

―efficient exhaust draught‖ means localized ventilation effected by mechanical means

for the removal of gas, Vapour, dust or fumes so as to prevent them (as far as practicable under

the atmospheric conditions usually prevailing) from escaping into the air of any place in which

work is carried on. No draught shall be deemed efficient which fails to remove smoke generated at

the point where such gas, Vapour, fume, or dust originate;

(b) ―lead compound‖ means any compound of lead other than galena which, when treated in the

manner described below, yields to an aqueous solution of hydrochloric acid a quantity soluble lead

compound exceeding, when calculated as lead monoxide, five percent of the dry weight of the

portion taken analysis.

The method of treatment shall be as follows:-

A weighed quantity of the material which has been dried at 100 degrees centigrade and

thoroughly mixed shall be continuously shaken for one hour at the common temperature with 1,000

times its weight of an aqueous solution of hydrochloric acid containing 0.25 per cent by weight of

hydrogen chloride. This solution shall thereafter be allowed to stand for one hour and then filtered.

The lead salt contained in the clear filtrate shall then be precipitated as lead sulphide and

weighed as lead sulphate.

3.

Exhaust draught – (1) The following processes shall not be carried on except under an

efficient exhaust draught or such other conditions as may be approved by the Chief Inspector-

cum-Facilitator:-

(a)

the mixing of raw materials to form a ―Bator‖;

(b)

the dry grinding, glazing and polishing of glass or any article of glass;

(c)

all processes in which hydrofluoric acid fumes or ammonical vapours are given off;

(d)

all processes in the making of furnace molds or ―pots‖ including the grinding or crushing

of used ―pots‖; and

(e)

All processes involving the use of a dry lead compound.

(2)All equipment for extraction or suppression of the dust shall at least once in every six months

be examined and tested by a competent person, and any defect disclosed by such examination

and test shall be rectified as soon as possible.

(3)A register containing particulars of such examination and test shall be kept in Form No. 26

266

DELHI GAZETTE : EXTRAORDINARY

PART IV]

4.

Prohibition relating to pregnant women and Adolescent – No pregnant woman or

adolescent shall be employed or permitted to work in any of the operations specified in

paragraph 2 or at any place where such operations are carried on.

5.

Floor and work-benches – The floor and work-benches of every room in which a dry

compound of lead is manipulated or in which any process is carried on giving off silica dust shall be

kept moist and shall comply with the following requirements :-

(a) The floor shall be –

(i)

of cement or similar material so as to be smooth and impervious to water;

(ii)

maintained in sound condition; and

(iii)

cleansed daily after being thoroughly spread with water at a time when no other work is

being carried on the room; and

(b)

The work-benches shall –

(i)

have a smooth surface and be maintained in sound condition, and

(ii)

cleansed daily either after being thoroughly damped or by means of a suction cleaning

apparatus at a time when no other work is being carried on thereat.

6.

Use of hydrofluoric acid – The following provisions shall apply to rooms in which glass

is treated with hydrofluoric acid :-

(a)

there shall be inlets and outlets of adequate size so as to secure and maintain efficient

ventilation in all parts of the room;

(b)

the floor shall be covered with gutta-percha and be tight and shall slope gently down to a

covered drain;

(c)

the workplaces shall be so enclosed in projecting hoods that openings required for the

bringing in the objects to be treated shall be as small as practicable; and

(d)

The efficient exhaust draught shall be so contrived that the gases are exhausted

downwards.

7.

Storage and transport of hydrofluoric acid – Hydrofluoric acid shall not be stored or

transported except in cylinders or receptacles made of lead or rubber.

8.

Blow pipes – Every glass blower shall be provided with a separate blow pipe bearing the

distinguishing mark of the person to whom it is issued and suitable facilities shall be readily

available to every glass blower for sterilizing his blow pipe.

9.

Food, drinks, etc., prohibited in workrooms – No food, drink, pan and supari or

tobacco shall be brought into or consumed by any worker in any room or workplace wherein any

process specified in paragraph 2 is carried on.

10.

Protective clothing – The occupier shall provide, maintain in good repair and keep in a

clean condition for the use of all persons employed in the processes specified in paragraph 2 suitable

[PART IV

DELHI GAZETTE : EXTRAORDINARY

267

protective clothing, footwear and goggles according to the nature of the work and such clothing,

footwear, etc. Shall be worn by the persons concerned.

11.

Washing facilities –

(1) There shall be provided and maintained in a cleanly state and in good repair for the use of all

persons employed in the processes specified in paragraph 2

(2)

a wash place with either –

(i)

a trough with a smooth impervious surface fitted with a waste pipe, without plug, and of

sufficient length to allow of at least 60 centimeters for every five such persons employed at any one

time, and having a constant supply of water from taps or jets above the trough at intervals of not

more than 60 centimeters; or

(3)

at least one wash basin for every five such persons employed at any one time, fitted with a

waste pipe and plug and having an adequate supply of water laid on or always readily available;

(4)

a sufficient supply of clean towels made of suitable material renewed daily with sufficient

supply of soap or other suitable cleansing material and of nail brushes; and

(5)

a sufficient number of stand pipes with taps the number and location of which shall be to

the satisfaction of the Chief Inspector-cum-Facilitator.

12.

Medical Examination by Medical officer –

(1)

Every workers employed in processes specified in paragraph 2 shall be examined by the

Medical officer within 15 days of his first employment. Such examination shall include

pulmonary function tests and in suspected cases chest X-ray as well as tests for lead and urine.

No worker shall be allowed to work after 15 days of first employment in the factory unless

certified for such employment by the Medical Officer.

(2)

Every worker employed in the said processes shall be re-examined by the Medical officer

at least once in every twelve calendar months. Such re- examination shall, wherever the Medical

officer considers appropriate, include tests as specified in sub-paragraph (1).

(3)

The Medical officer after examining a worker, shall issue a Certificate of Fitness in Form-24.

The record of examination and re-examination carried out shall been entered in the Certificate and

the Certificate shall be kept in the custody of the occupier of the factory. The record of each

examination carried out under subparagraph (1) and (2), including the nature and the results of the

tests, shall also be entered by the Medical officer in a health register in Form- 25.

(4)

The Certificate of Fitness and the health register shall be kept readily available for

inspection by the Inspector-cum-Facilitator.

268

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(5)

If at any time the Medical officer is of the opinion that a worker is no longer fir for

employment in the said processes on the ground that continuance therein would involve special

danger to the health of worker, he shall make a record of his findings in the said certificate and the

health register. The entry of his findings in those documents should also include the period for

which he considers that the said person is unfit for work in the said processes. The person so

suspended from the process shall be provided with alternate placement facilities unless he is fully

incapacitated in the opinion of the Medical officer, in which the person affected shall be suitable

rehabilitated.

(6)

No person who has been found unfit to work as said in sub-paragraph (5) shall be re-

employed or permitted to work in the said processes unless the Medical officer , after further

examination, again certifies him fit for employment in those processes.

SCHEDULE-V

GRINDING OR GLAZING OF METALS AND PROCESSES INCIDENTAL THERETO

1.

Definitions – For the purposes of this schedule –

(a)

―grindstone‖ means a grindstone composed of natural or manufactured sandstone but does

not include a metal wheel or cylinder into which blocks of natural or manufactured sandstone are

fitted;

(b)

―abrasive wheel‖ means a wheel manufactured of bonded emery or similar abrasive;

(c)

―grinding‖ means the abrasion, by aid of mechanical power, of metal, by means of a

grindstone or abrasive wheel;

(d)

―glazing‖ means the abrading, polishing or finishing, by aid of mechanical power, of metal,

by means of any wheel, buff, mop or similar appliance to which any abrading or polishing

substance is attached or applied;

(e)

―racing‖ means the turning up, cutting or dressing of a revolving grindstone before it is

brought into use for the first time;

(f)

―hacking‘ means the chipping of the surface of a grindstone by a hack or similar tool; and

(g)

―rodding‖ means the dressing of the surface of a revolving grindstone by the application of a

rod, bar or strip of metal to such surface.

Exception – (1) Nothing in this schedule shall apply to any factory in which only

repairs are carried on except any part thereof in which one or more persons are wholly or mainly

employed in the grinding or glazing of metals.

(2) Nothing in this schedule except paragraph 4 shall apply to any grinding or glazing of

metals carried on intermittently and at which no person is employed for more than 12 hours in any

week

2.

Equipment for removal of dust –No racing, dry grinding or glazing shall be performed

[PART IV

DELHI GAZETTE : EXTRAORDINARY

269

without –

(a)

a hood or other appliance so constructed, arranged, placed and maintained as substantially to

intercept the dust thrown off;

(b)

a duct of adequate size, air tight and so arranged as to be capable of carrying away the

dust, which duct shall be kept free from obstruction and shall be provided with proper means of

access for inspection and cleaning, and where practicable, with a connection at the end remote from

the fan to enable the Inspector-cum-Facilitator to attach thereto any instrument necessary for

ascertaining the pressure of air in the said duct; and

(c)

a fan or other efficient means of producing a draught sufficient to extract the dust:

Provided that the Chief Inspector-cum-Facilitator may accept any other appliance that is, in his

opinion, as effectual for the interception, removal and disposal of dust thrown off as a hood, duct

and fan would be.

3.

Restriction on employment on grinding operations – Not more than one person shall at

any time perform the actual process of grinding or glazing upon a grindstone, abrasive wheel or

glazing appliance:

Provided that this paragraph shall not prohibit the employment of persons to assist in the

manipulation of heavy or bulky articles at any such grindstone, abrasive wheel or glazing

appliance.

4.

Glazing – Glazing or other processes, except processes incidental to wet grinding upon a

grindstone shall not be carried on in any room in which wet grinding upon a grindstone is done.

5.

Hacking and rodding – Hacking or rodding shall not be done unless during the process

either an adequate supply of water is laid on at the upper surface of the grindstone or adequate

appliances for the interception of dust are provided in accordance with the requirements of

paragraph 3.

6.

Examination of dust equipment – (1) All equipment for the extraction or suppression of

dust shall at least once in every six months be examined and tested by competent person, and any

defect disclosed by such examination and test shall be rectified as soon as practicable.

(2) A register containing particulars of such examination and test shall be kept in Form No. 26

7. Medical examination by the Medical officer – (1) every worker employed in grinding or

glazing of metal and processes incidental thereto shall be examined by a Medical officer within 15

days of his first employment. Such examination shall include pulmonary function tests and in

suspected cases chest X-rays.

(2) No worker shall be allowed to work after 15 days of his first employment in the factory

unless certified fit for such employment by the Medical officer.Every worker employed in the

said processes shall be re-examined by a Medical officer at least once in every 12 calendar months.

270

DELHI GAZETTE : EXTRAORDINARY

PART IV]

Such re-examination shall, wherever the Medical officer considers appropriate, include tests as

specified in sub-paragraph

(3) The Medical officer after examining a worker shall issue a Certificate of Fitness in Form-24.

The record of examination and re-examinations carried out shall be entered in the Certificate and

the Certificate shall be kept in the custody of the occupier of the factory. The record of each

examination carried out under sub-paragraphs (1)and (2), including the nature and the results of the

tests, shall also be entered by the Medical officer in a health register in Form- 25.

(4) The Certificate of Fitness and the health register shall be kept readily available for inspection

by the Inspector-cum-Facilitator.

(5) If at any time the Medical officer is of the opinion that a worker is no longer fit for

employment in the said processes on the found that continuance therein would involve special

danger to the health of the worker he shall make record of his findings in the said certificate and

the health register. The entry of his findings in those documents should also include the period for

which he considers that the said person is unfit for work in the said processes. The person so

suspended from the process shall be provided with alternate placement facilities unless he is fully

incapacitated in the opinion of the Medical officer, in which case the person affected shall be

suitably rehabilitated.

(6) No person who has been found unfit to work as said in sub-paragraph (5) shall be re-employed

or permitted to work in the said processes unless the Medical officer, after further examination,

again certifies him fit for employment in those processes.

10.

Exemption – The Chief Inspector-cum-Facilitator may by certificate in writing, subject to

such conditions as he may specify therein, relax or suspend any of the provisions of this schedule in

respect of any factory if owing to the special methods of work or otherwise such relaxation or

suspension is practicable without danger to the health or safety of the persons employed.

SCHEDULE-VI

MANUFACTURE AND TREATMENT OF LEAD AND CERTAIN COMPOUNDS OF

LEAD

1.

Exemption – Where the Chief Inspector-cum-Facilitator is satisfied that all or any of the

provisions of this any factory from all or any of such provisions, subject to such conditions as he

may specify. Schedule are not necessary for the protection of the persons employed, he may by

certificate in writing exempt

2.

Definitions – For this purpose of this schedule –

(a)

―lead compound‖ means any compound of lead other than galena which, when treated in the

manner described below, yields to an aqueous solution of hydrochloric acid, a quantity of soluble

lead compound exceeding, when calculated as lead monoxide, five per cent of the ―dry weight‖

of the portion taken for analysis. In the case of paints and similar products and other mixtures

[PART IV

DELHI GAZETTE : EXTRAORDINARY

271

containing oil or fat the ―dry weight‖ means the dry weight of the material remaining after the

substance has been thoroughly mixed and treated with suitable solvents to remove oil, fats,

varnish or other media.

The method of treatment shall be as follows:-

A weighed quantity of the material which has been dried at 100 degree centigrade and thoroughly

mixed shall be continuously shaken for one hour, at the common temperature with 1,000 times its

weight of an aqueous solution of hydrochloric acid containing 0.25 per cent by weight of

hydrogen chloride. This solution shall thereafter be allowed to stand for one hour and then filtered.

The lead salt contained in the clear filtrate shall then precipitate as lead sulphate and weighed as lead

sulphate;

(b)

―efficient exhaust draught‖ means localized ventilation effected by mechanical means for

the removal of gas, Vapour, dust or fumes so as to prevent them (as far as practicable under the

atmospheric conditions usually prevailing) from escaping into the air of any place in which work is

carried on. No draught shall be deemed efficient which fails to remove smoke generated at the point

where such gas, Vapour, fume, or dusts originate.

3.

Application – This schedule shall apply to all factories or parts of factories in which any of

the following operations are carried on:-

(a)

work at a furnace where the reduction or treatment of zinc or lead ores is carried on;

(b)

the manipulation, treatment or reduction of ashes containing lead, the DE silvering of

lead or the melting of scrap lead or zinc;

(c)

the manufacture of solder or alloys containing more than ten percent of lead;

(d)

the manufacture of any oxide, carbonate, sulphate, chromate, acetate, nitrate or silicate of

lead;

(e)

the handling or mixing of lead tetra-ethyl;

(f)

any other operation involving the use of a lead compound; and

(g)

The cleaning of workrooms where any of the operations aforesaid are carried on.

4.

Prohibition relating to pregnant women and Adolescent – No pregnant women or

adolescent shall be employed or permitted to work in any of the operations specified in paragraph

3.

5.

Requirements to be observed – No person shall be employed or permitted to work in any

process involving the use of lead compounds if the process is such that dust or fume from a lead

compound is produced therein, or the persons employed there in are liable to be splashed with any

lead compound in the course of their employment unless the provisions of paragraphs 5 to 13 are

complied with.

6.

Exhaust draught – (1) Where dust, fume, gas or Vapour is produced in the process,

272

DELHI GAZETTE : EXTRAORDINARY

PART IV]

provision shall be made for removing them by means of an efficient exhaust draught to contrived

as to operate on the dust, fume, gas or Vapour as closely as possible to the point of origin.

(2) All equipment for the extraction or suppression of dust shall at least once in every six

months be examined and tested by competent person, and any defect disclosed by such

examination and test shall be rectified as soon as practicable.

(3)

A register containing particulars of such examination and test shall be kept in Form No.

26

7.

Medical examination by the Medical officer – (1) every worker employed in the

operations referred to in paragraph 3 shall be examined by a Medical officer within 15 days of his

first employment. Such examination shall include pulmonary function tests for lead in blood and

urine, ALA in urine. hemoglobin content, stippling of cells and steadiness tests. No worker shall

be allowed to work after 15 days of his first employment in the factory unless certified fit for such

employment by the Medical officer.

(2)

Every worker employed in the said processes shall be re-examined by a Medical officer at

least once in every 3 calendar months. Such re-examination shall, wherever the Medical officer

considers appropriate, include tests as specified in sub-paragraph (1).

(3)

The Medical officer after examining a worker, shall issue a Certificate of Fitness in Form-

24. The record of examination and re-examinations carried out shall be entered in the Certificate

and the Certificate shall be kept in the custody of the occupier of the factory. The record of each

examination carried out under subparagraphs(1) and (2), including the nature and the results of the

tests, shall also be entered by the Medical officer in a health register in Form- 25.

(4)

The Certificate of Fitness and the health register shall be kept readily available for

inspection by the Inspector-cum-Facilitator.

(5)

If at any time the Medical officer is of the opinion that a worker is no longer fit for

employment in the said processes on the ground that continuance therein would involve special

danger to the health of the worker he shall make record of his findings in the said certificate and

the health register. The entry of his findings in those documents should also include the period for

which he considers that the said person is unfit for work in the said processes. The person so

suspended from the process shall be provided with alternate placement facilities unless he is fully

incapacitated in the opinion of the Medical officer, in which case the person affected shall be

suitably rehabilitated.

(6)

No person who has been found unfit to work as said in sub-paragraph (5) shall be re-

employed or permitted to work in the said processes unless the Medical officer, after further

examination, again certifies him fit for employment in those processes.

8.

Food, drinks, etc. Prohibited in workroom – No food, drink, pan and supari or tobacco

shall be brought into or consumed by any worker in any worker in any workroom in which the

process is carried on and no person shall remain in any such room during intervals for meals or

[PART IV

DELHI GAZETTE : EXTRAORDINARY

273

rest.

9.

Protective clothing – Suitable protective overalls and head coverage shall be provided,

maintained and kept clean by the occupier and such overalls and head coverings shall be worn by

the persons employed.

10.

Cleanliness of workrooms, tools, etc. – The rooms in which the persons are employed and

all tools and apparatus used by them shall be kept in a clean state.

11.

Washing facilities – (1)The occupier shall provide and maintain for the use of all persons

employed suitable washing facilities consisting of –

(a)

a trough with a smooth impervious surface fitted with a waste pipe, without plug, and of

sufficient length to allow of at least two feet for every five such persons employed at any one time,

and having a constant supply of water from taps or jets above the trough at intervals of not more

than 60 centimeters; or

(b)

At least one wash-basin for every ten persons employed at any one time, fitted with a waste

pipe and plug and having a constant supply of clean water; together with, in either case, a

sufficient supply of nail brushes, soap or other suitable cleansing material and clean towels.

(2) The facilities so provided shall be placed under the charge of a responsible person and shall be

kept clean.

12.

Mess room or canteen – The occupier shall provide and maintain for the use of the

persons employed suitable and adequate arrangements for taking their meals. The arrangements

shall consist of the use of a room separate from any workroom which shall be furnished with

sufficient tables and benches, and unless a canteen serving hot meals is provided, adequate means of

warming the food. The room shall be adequately ventilated by the circulation of fresh air, shall be

placed under the charge of a responsible person and shall be kept clean.

13.

Cloakroom – The occupier shall provide and maintain for the use of persons employed,

suitable accommodation for clothing not worn during working hours, and for the drying of wet

clothing.

SCHEDULE-VII

GENERATING PETROL GAS FROM DANGEROUS PETROLEUM

1.

Prohibition relating to pregnant women and Adolescent – No pregnant woman or

adolescent shall be employed or permitted to work in or shall be allowed to enter any building in

which the generation of gas from dangerous petroleum is carried on.

2.

Flame traps – The plant for generation of gas from dangerous petroleum and associated

piping and fittings shall be fitted with at least two efficient flame traps so designed and

maintained as to prevent a flash back from any burner to the plant. One of these traps shall be

fitted as close to the plant as possible. The plant and all pipes and valves shall be installed and

274

DELHI GAZETTE : EXTRAORDINARY

PART IV]

maintained free form leaks.

3.

Generating building or room – All plants for generation of gas from dangerous

petroleum erected after the coming into force of the provisions specified in this schedule, shall be

erected outside the factory building proper in a separate well-ventilated building (hereinafter

referred to as ―generating building‖). In the case of such plants erected before the coming into

force of the provisions specified in this schedule, there shall be no direct communication between the

room where such plants are erected (hereinafter referred to as ―the generating room‖) and the

remainder of the factory building. So far as practicable, all such generating rooms shall be

constructed of fire-resisting materials.

4.

Fire extinguishers – An efficient means of extinguishing petrol fires shall be maintained

in an easily accessible position near the plant for generation of gas from dangerous petroleum.

5.

Plant to be approved by Chief Inspector-cum-Facilitator – gas from dangerous

petroleum shall not be manufactured except in a plant for generating gas, the design and

construction of which has been approved by the Chief Inspector-cum-Facilitator.

6.

Escape of dangerous petroleum – Effective steps shall be taken to prevent dangerous

petroleum from escaping into any drain or sewer.

7.

Prohibition relating to smoking – No person shall smoke or carry matches, fire or naked

light or other means of producing a naked light or spark in the generation room or building or in

the vicinity thereof and a warning notice in the language understood by the majority of the

workers shall be posted in the factory prohibiting smoking and the carrying of matches, fire or

naked light or other means of producing a naked light or spark into such room or building.

8.

Access to dangerous petroleum or container – No unauthorized person shall have

access to any dangerous petroleum or to a vessel containing or having actually contained

dangerous petroleum.

9.

Electric fittings – All electric fittings shall be of flameproof construction and all electric

conductors shall either be enclosed in metal conduits or be lead-sheathed.

10.

Construction of doors – All doors in the generating room or building shall be constructed

to open outwards or to slide and no door shall be locked or obstructed or fastened in a such a

manner that it cannot be easily and immediately opened from the inside while gas is being

generated and any person is working in the generating room or building.

11.

Repair of containers- No vessel that has contained dangerous petroleum shall be repaired

in a generating room or building and no repairs to any such vessel shall be undertaken unless live

steam has been blown into the vessel and until the interior is thoroughly steamed out or other

equally effective steps have been taken to ensure that it has been rendered free from dangerous

petroleum or inflammable Vapour.

[PART IV

DELHI GAZETTE : EXTRAORDINARY

275

SCHEDULE-VIII

CLEANING OR SMOOTHING, ROUGHENING, ETC. OF ARTICLES, BY A JET OF

SAND, METAL SHOT, OR

GRIT, OR OTHER ABRASIVE PROPELLED BY A BLAST OF COMPRESSED AIR

OR STEAM

(BLASTING REGULATIONS)

1.

Definitions – For the purposes of this schedule –

(a)

―blasting‖ means cleaning, smoothing, roughening, or removing of any part of the surface

of any article by the use of an abrasive of a jet of sand, metal shot, or grit or other material,

propelled by a blast of compressed air or steam ;

(b)

―blasting enclosure‖ means a chamber, barrel, cabinet or any other enclosure designed for

the performance of blasting therein;

(c)

―blasting chamber‖ means a blasting enclosure in which any person may enter at any time in

connection with any work or otherwise; and

(d)

―cleaning of castings‖ where done as an incidental or supplemental process in connection with

the making of metal castings, means the freeing of the casting from adherent sand or other

substance and includes the removal of cores and the general smoothening of a casting, but does

not include the free treatment.

2.

Prohibition of sand blasting – Sand or any other substance containing free silica shall

not be introduced as an abrasive into any blasting apparatus and shall not be used for blasting :

Provided that this clause shall come into force two years after the coming into operation

of this schedule.

Provided further that no pregnant woman or adolescent shall be employed or permitted to

work at any operation of sand blasting.

3.

Precautions in connection with blasting operations – (1) Blasting shall not be done

except in a blasting enclosure and no work other than blasting and any work immediately

incidental thereto and clearing and repairing of the enclosure including the plant and appliances

situated therein, shall be kept closed and air tight while blasting is being done therein.

(2)

Maintenance of blasting enclosure: Blasting enclosure shall always be maintained in good

condition and effective measures shall be taken to prevent dust escaping from such enclosure, and

from apparatus connected therewith, into the air of any room.

(3)

Provision of separating apparatus: There shall be provided and maintained for and in

connection with every blasting enclosure, efficient apparatus for separating, so far as practicable,

abrasive which has been used for blasting and which is to be used again as an abrasive, from dust

or particles of other materials arising from blasting; and no such abrasive shall be introduced into

276

DELHI GAZETTE : EXTRAORDINARY

PART IV]

any blasting apparatus and used for blasting until it has been so separated:

Provided that this clause shall not apply, except in the case of blasting chambers, to blasting

enclosures constructed or installed before the coming into force of this schedule, if the Chief

Inspector-cum-Facilitator is of opinion that it is not reasonably practicable to provide such

separating apparatus.

(4)

Provision of ventilating plant: There shall be provided and maintained in connection with

every blasting enclosure efficient ventilating plant to extract, by exhaust draught effected by

mechanical means, dust produced in the enclosure. The dust extracted and removed shall be

disposed of by such method and in such manner that it shall not escape into the air of any room; and

every other filtering or settling device situated in a room in which persons are employed, other than

persons attending to such bag or other filtering or settling device, shall be completely separated

from the general air of that room in an enclosure ventilated to the open air.

(5)

Operation of ventilating plant: The ventilating plant provided for the purpose of

subparagraph(4) shall be kept in continuous operation whenever the blasting enclosure is in use

whether or not blasting is actually taking place therein, and in the case of a blasting chamber, it

shall be in operation even when any person is inside the chamber for the purpose of cleaning.

4.

Provision of protective helmets, gauntlets and overalls – (1) There shall be provided

and maintained for the use of all persons who are employed in a blasting chamber, whether in

blasting or in any work connected therewith or in cleaning such a chamber, protective helmets of a

type approved by a certificate of the Chief Inspector-cum-Facilitator; and every such person shall

wear the helmet provided for this use whilst he is in the chamber and shall not remove it until he is

outside the chamber.

(2)

Each protective helmet shall carry a distinguishing mark indicating the person by whom it

is intended to be used and no person shall be allowed or required to wear a helmet not carrying

his mark or a helmet which has been worn by another person and has not since been thoroughly

disinfected.

(3)

Each protective helmet when in use shall be supplied with clean and not unreasonably cold

air at a rate of not less 170 liters per minute.

(4)

Suitable gauntlets and overalls shall be provided for the use of all persons while performing

blasting or assisting at blasting, and every such person shall while so engaged, wear the gauntlet

and overall provided.

5.

Precautions in connection with cleaning and other work – (1) Where any person is

engaged upon cleaning of any blasting apparatus or blasting enclosure or of any apparatus or

ventilating plant connected therewith or the surroundings thereof or upon any other work in

connection with any blasting apparatus or blasting enclosure or with any apparatus or ventilating

plant connected therewith so that he is exposed to the risk of inhaling dust which has arisen from

blasting, all practicable measures shall be taken to prevent such inhalation.

[PART IV

DELHI GAZETTE : EXTRAORDINARY

277

(2) In connection with any cleaning operation referred to in paragraph 5, and with the removal of dust

from filtering or settling devices all practicable measures shall be taken to dispose of the dust in such

a manner that it does not enter the air of any room. Vacuum cleaners shall be provided and used

wherever practicable for such cleaning operations.

6.

Storage accommodation for protective wear – Adequate and suitable storage

accommodation for the helmets, gauntlets and overalls required to be provided by paragraph 5

shall be provided outside and conveniently near to every blasting enclosure and such

accommodation shall be kept clean. Helmets, gauntlets and overalls when not in actual use shall be

kept in this accommodation.

7.

Maintenance and cleaning of protective wear – All helmets, gauntlets, overalls and

other protective devices or clothing‘s provided and worn for the purposes of this schedule, shall

be kept in good condition and so far as is reasonably practicable shall be cleaned on every

weekday in which they are used. Where dust arising from the cleaning of such protective clothing or

devices is likely to be inhaled, all practicable measures shall be taken to prevent such inhalation.

Vacuum cleaners shall, wherever practicable, be used for removing dust from such clothing and

compressed air shall not be used for removing dust from any clothing.

8.

Maintenance of vacuum cleaning plant – Vacuum cleaning plant used for the purpose

of this schedule shall be properly maintained.

9.

Restrictions in employment of Adolescent – (1) No person under 18

years of age shall be employed in blasting or assisting at blasting or in any blasting chamber or in

the cleaning of any blasting apparatus or any blasting enclosure or any apparatus or ventilating

plant connected therewith or be employed on maintenance or repair work at such apparatus,

enclosure or plant.

(2) No person under 18 years of age shall be employed to work regularly within twenty feet of

any blasting enclosure unless the enclosure is in a room and he is outside that room where he is

effectively separated from any dust coming from the enclosure.

10.

Power to exempt or relax – (1) If the Chief Inspector-cum-Facilitator is satisfied that in

any factory or any class of factory, the use of sand or other substance containing free silica as an

abrasive in blasting is necessary for a particular manufacture or process (other than the process

incidental or supplemental to making of metal castings) and that the manufacture or process cannot

be carried on without the use of such abrasive or that owing to the special conditions or special

method of work or otherwise any requirement of this schedule can be relaxed without endangering

the health of the persons employed or that application of any such requirements is for any reason

impracticable or inappropriate, he may, with the previous sanction of the Government, by an order

in writing exempt the said factory or class of factory from such provisions of this schedule, to such

an extent and subject to such conditions and for such period as may be specified in the said order.

278

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(2) Where an exemption has been granted under sub-paragraph (1), a copy of the order shall be

displayed at a notice board at a prominent place at the main entrance or entrances to the factory

and also at the place where the blasting is carried on.

11.

Medical examination by the Medical officer – (1) every worker employed in any of the

processes to which this schedule shall be examined by a Medical officer within 15 days of his first

employment. Such examination shall include pulmonary function tests and chest X-rays. No

worker shall be allowed to work after 15 days of his first employment in the factory unless

certified fit for such employment by the Medical officer.

(2)

Every worker employed in the said processes shall be re-examined by a Medical officer at

least once in every 12 calendar months and such re- examination shall, wherever the Medical

officer considers appropriate, include pulmonary function test and chest X-ray once in every three

years.

(3)

The Medical officer after examining a worker shall issue a Certificate of Fitness in Form-

24. The record of examination and re-examinations carried out shall be entered in the Certificate

and the Certificate shall be kept in the custody of the occupier of the factory. The record of each

examination carried out under subparagraphs(1) and (2), including the nature and the results of the

tests, shall also be entered by the Medical officer in a health register in Form- 25.

(4)

The Certificate of Fitness and the health register shall be kept readily available for

inspection by the Inspector-cum-Facilitator.

(5)

If at any time the Medical officer is of the opinion that a worker is no longer fit for

employment in the said processes on the ground that continuance therein would involve special

danger to the health of the worker he shall make record of his findings in the said certificate and

the health register. The entry of his findings in those documents should also include the period for

which he considers that the said person is unfit for work in the said processes. The person so

suspended from the process shall be provided with alternate placement facilities unless he is fully

incapacitated in the opinion of the Medical officer, in which case the person affected shall be

suitably rehabilitated.

(6)

No person who has been found unfit to work as said in sub-paragraph (5) shall be re-

employed or permitted to work in the said processes unless the Medical officer, after further

examination, again certifies him fit for employment in those processes.

SCHEDULE-IX

LIMING AND TANNING OF RAW HIDES AND SKINS AND PROCESSES

INCIDENTAL THERETO.

1.

Cautionary notices – (1) Cautionary notices as to anthrax in the form specified by the

Chief Inspector-cum-Facilitator shall be affixed in prominent positions in the factory where they

may be easily and conveniently read by the persons employed.

(2)

A copy of a warning notice as to anthrax in the form specified by the Chief Inspector-

cum-Facilitator shall be given to each person employed when he is engaged, and subsequently if

[PART IV

DELHI GAZETTE : EXTRAORDINARY

279

still employed, on the first day of each

calendar year.

(3)

Cautionary notices as to the effects of chrome on the skin shall be affixed in prominent

positions in every factory in which chrome solutions are used and such notices shall be so placed as

to be easily and conveniently read by the persons employed.

(4)

Notices shall be affixed in prominent places in the factory stating the position of the first-

aid box or cupboard and the name of the person in charge of such box or cupboard.

(5)

If any person employed in the factory is illiterate, effective steps shall be taken to explain

carefully to such illiterate person the contents of the notice specified in subparagraphs (1), (2) and

(4) and if chrome solutions are used in the factory, the contents of the notice specified in sub-

paragraph (3).

2.

Protective clothing – The occupier shall provide and maintain in good condition the

following articles of protective clothing :-

(a)

waterproof footwear leg coverings, aprons and gloves for persons employed in processes

involving contact with chrome solutions, including the preparation of such solutions;

(b)

gloves and boots for persons employed in lime yard;

(c)

protective footwear, aprons and gloves for persons employed in processes involving the

handling of hides and skins, other than in processes specified in subparagraphs(a) and (b) above :

Provided that:-

(i)

the gloves, aprons, leg coverings or boots may be of rubber or leather, but the gloves and boots

to be provided under sub-paragraphs (a) and (b) shall be of rubber.

(ii)

the gloves may not be provided to persons fleshing by hand or employed in processes in

which there is no risk of contact with lime, sodium sulphide or other caustic liquor.

3.

Washing facilities, mess room and cloakroom – There shall be provided and maintained

in a clean state and in good repair for the use of all persons employed –

(a)

a trough with a smooth impervious surface fitted with a waste pipe, without plug, and of

sufficient length to allow of at least 60 centimeters for every five such persons employed at any one

time, and having a constant supply of water from taps or jets above the trough at intervals of not

more than 60 centimeters; or

(b)

at least on wash-basin for every ten such persons employed at any one time, fitted with a

waste pipe and plug and having a constant supply of clean water; together with, in either case, a

sufficient supply of nail brushes, soap or other suitable cleansing material and clean towels;

(c)

a suitable mess room, adequate for the number remaining on the premises during the meal

intervals, which shall be furnished with sufficient tables and benches and adequate means for

warming food and for boiling water. The mess room shall –

(i)

be separate from any room or shed in which hides or skins are stored, treated or

manipulated;

(ii)

be separate from the cloakroom; and

(iii)

be placed under the charge of a responsible person; and

(d)

the occupier shall provide and maintain for use of all persons employed suitable

accommodation for clothing put off during working hours and another accommodation for

protective clothing and also adequate arrangements for drying up the clothing in both the cases, if

wet. The accommodation so provided shall be kept clean at all times and placed under the charge

of a responsible person.

4.

Food, drinks, etc. Prohibited in workrooms – No food, drink, pan and supari or

tobacco shall be brought into or consumed by any worker in any workroom or shed in which

280

DELHI GAZETTE : EXTRAORDINARY

PART IV]

hides or skins are stored, treated or manipulated.

5.

Medical Examination by Medical officer – (1) every worker employed in shall be

examined by a Medical officer within 15 days of his first employment. Such examination shall

include No worker shall be allowed to work after 15 days of his first employment in the factory

unless certified fit for such employment by the Medical officer.

(2)

Every worker employed in the said processes shall be re-examined by the Medical officer

at least once in every twelve calendar months. Such re- examination shall, wherever the Medical

officer considers appropriate, include tests as specified in subparagraph(1).

(3)

The Medical officer after examining a worker shall issue a Certificate of Fitness in Form-

05. The record of examination and re-examination carried out shall be entered in the Certificate and

the Certificate shall be kept in the custody of the occupier of the factory. The record of each

examination carried out under sub-paragraph (1) and (2),including the nature and the results of

the tests, shall also be entered by the Medical officer in a health register in Form- 25.

(4)

The Certificate of Fitness and the health register shall be kept readily available for

inspection by the Inspector-cum-Facilitator.

(5)

If at any time the Medical officer is of the opinion that a worker is no longer fit for

employment in the said processes on the ground that continuance therein would involve special

danger to the health of the worker, he shall make a record of his findings in the said certificate and

the health register. The entry of his findings in those documents should also include the period for

which he considers that the said person is unfit for work in the said processes. The person so

suspended from the process shall be provided with alternate placement facilities unless he is fully

incapacitated in the opinion of the Medical officer, in which can the person affected shall be suitable

rehabilitated.

(6)

No person who has been found unfit to work as said in sub-paragraph (5) above shall be re-

employed or permitted to work in the said processes unless the Medical officer, after further

examination, again certifies him fit for employment in those processes.

SCHEDULE-X

CARRYING ON OF CERTAIN PROCESSES OF LEAD AND LEAD MATERIAL IN

PRINTING PRESSES AND TYPE

FOUNDRIES

1.

Exemption – Where the Chief Inspector-cum-Facilitator is satisfied that all or any of the

provisions of this schedule are not necessary for the protection of persons employed, he may by

certificate in writing exempt any factory from all or any such provisions subject to such conditions

as he may specify therein. Such certificate may at any time be revoked by the Chief Inspector-

cum- Facilitator.

2.

Definitions – For the purpose of this schedule –

(a)

―lead material‖ means material containing not less than five per cent of lead;

(b)

―lead process‖ means –

(i)

the melting of lead or any lead material for casting and mechanical composing;

(ii)

the recharging of machines with used lead material;

(iii)

any other work including removal of dross from melting pots and cleaning of plungers; and

(iv)

Manipulation, movement or other treatment of lead material.

(c)

―efficient exhaust draught‖ means localized ventilation effected by head or mechanical

means for the removal of gas, Vapour, dust or fumes so as to prevent them from escaping into the

air of any place in which work is carried on. No draught shall be deemed efficient which fails to

remove smoke generated at the point where such gas, Vapour, fume, or dust originate.

3.

Exhaust draught –

(1)

None of the following processes shall be carried on except with an efficient exhaust draught

[PART IV

DELHI GAZETTE : EXTRAORDINARY

281

unless carried on in such a manner as to prevent free escape of gas, Vapour, fumes or dust into

any place in which work is carried on, or unless carried on in electrically heated and

thermostatically controlled melting pots:-

(a)

melting lead material or slugs; and

(b)

Heating lead material so that Vapour containing lead is given off.

Provided that the aforesaid processes may be carried on without efficient exhaust draught if they

are carried on in such a manner as to prevent free escape of gas, Vapour, fume or dust into any

place in which work is being done or is carried on in electrically-heated and thermostatically

controlled melting pots.

(2)

Such exhaust draught shall be affected by mechanical means and so contrived as to

operate on the dust, fume, gas or Vapour given off as closely as may be at its point of origin.

(3)

(a) All equipment for the extraction or suppression of dust shall at least once in every six

months be examined and tested by competent person, and any defect disclosed by such

examination and test shall be rectified as soon as practicable.

(b) A register containing particulars of such examination and test shall be kept in Form No.

26

4.

Prohibition relating to pregnant women and Adolescent – No pregnant woman or

adolescent shall be employed or permitted to work in any lead process.

5.

Separation of certain processes.- Each of the following processes shall be carried on in

such a manner and under such conditions as to secure effectual separation from one another and

from any other processes :-

(a)

melting of lead or any lead material;

(b)

casting of lead ingots; and

(c)

Mechanical composing.

6.

Container for dross – A suitable receptacle with tightly fitting cover shall be provided and

used for dross as it is removed from every melting pot. Such receptacle shall be kept covered

while in the workroom near the machine except when the dross is being deposited therein.

7.

Floor of workroom – The floor of every workroom where lead process is carried on shall

be –

(a)

of cement or similar material so as to be smooth and impervious to water;

(b)

maintained in sound condition; and

(a) Shall be cleansed throughout daily after being thoroughly damped with water at a time when

no other work is being carried on at the place.

8.

Mess room – There shall be provided and maintained for the use of all persons employed

in a lead process and remaining on the premises during the meal intervals, a suitable mess room

which shall be furnished with sufficient tables and benches.

9.

Washing facilities – (1) There shall be provided and maintained in a cleanly state and in

good repair for the use of all persons employed in a lead process –

(a)

a wash place with either –

(i)

a trough with a smooth impervious surface fitted with a waste pipe without plug, and of

sufficient length to allow at least 60 centimeters for every five such persons employed at any one

time, and having a constant supply of water from taps or jets above the trough at intervals of not

more than 60 centimeters; or

(ii)

at least one wash basin for every five such persons employed at any one time, fitted with a

waste pipe and plug and having an adequate supply of water laid on or always readily available;

and

(b)

a sufficient supply of clean towels made of suitable materials renewed daily, with a

282

DELHI GAZETTE : EXTRAORDINARY

PART IV]

sufficient supply of soap or other suitable cleansing material.

10.

Medical examination by Medical officer – (1) Every worker employed in a lead processes

shall be examined by a Medical officer within 15 days of his first employment. Such examination

shall include tests for lead in urine and blood. ALA in urine, hemoglobin content, stippling of

cells and steadiness test. No worker shall be allowed to work after 15 days of his first employment

in the factory unless certified fit for such employment by the Medical officer.

(2)

Every worker employed in the said processes shall be re-examined by a Medical officer at

least once in every six calendar months. Such re-examination shall, wherever the Medical officer

considers appropriate, include tests as specified in sub- paragraph (1).

(3)

The Medical officer after examining a worker, shall issue a Certificate of Fitness in Form-

24. The record of examination and re-examinations carried out shall be entered in the Certificate

and the Certificate shall be kept in the custody of the occupier of the factory. The record of each

examination carried out under subparagraphs (1) and (2), including the nature and the results of the

tests, shall also be entered by the Medical officer in a health register in Form- 25.

(4)

The Certificate of Fitness and the health register shall be kept readily available for

inspection by the Inspector-cum-Facilitator.

(5)

if at any time medical officer is of the opinion that a worker is no longer fit for employment

in the said process on the ground that continuance therein would involve special danger to the

health of the worker he shall make a record of his findings in the said Certificate and the health

register. The entry of his findings in these documents should also include the period for which he

considers that the said person is unfit for work in the said processes. The person so suspended

from the process shall be provided with alternate placement facilities unless he is fully incapacitated in

the opinion of the Medical officer, in which case the person affected shall be suitably rehabilitated.

(6)

No person who has been found unfit to work as said in sub-paragraph (5) above shall be re-

employed or permitted to work in the said processes unless the Medical officer, after further

examination, again certifies him fit for employment in those processes.

11.

Food, drinks, etc. Prohibited in workrooms – No food, drink, pan and supari or tobacco

shall be consumed or brought by any worker into any workroom in which any lead process is carried

on.

12.

The occupier shall provide to all persons employed in lead process two full sleeve overall

every year, arrange for their weekly washing and maintain these in good condition. The person

employed in such a process shall wear these overall while engaged in such work.

SCHEDULE-XI

CHEMICAL WORKS

PART I

1.

Application – This schedule shall apply to all manufacture and processes incidental there

to be carried on in chemical works.

2.

Definitions – For the purpose of this schedule –

(a)

―chemical works‖ means any factory or such parts of any factory as are listed in appendix

`A‘ to this schedule;

(b)

―efficient exhaust draught‖ means localized ventilation effected by mechanical or other

means for the removal of gas, Vapour, fume or dust to prevent it from escaping into the air of any

place in which work is carried on;

(c)

―bleaching powder‖ means the bleaching powder commonly called chloride of lime;

(d)

―chlorate‖ means chlorate or per chlorate;

(e)

―caustic‖ means hydroxide of potassium or sodium;

(f)

―chrome process‖ means the manufacture of chromate or dichromate of potassium or

sodium, OT the manipulation, movement or other treatment of these substances;

[PART IV

DELHI GAZETTE : EXTRAORDINARY

283

(g)

―nitro or amino process‖ means the manufacture of nitro or amino derivatives of phenol and of

benzene or its homologues, and the making of explosives with the use of any of these substances;

(h)

the term `permit to work‘ system means the compliance with the procedures laid down under

Para 20 of Part II;

(i)

―toxic substances‖ means all those substances which when they enter into the human body,

through inhalation or ingestion or absorption through skin, in sufficient quantities cause fatality or

exert serious affliction of health, or chronic harmful effects on the health of persons exposed to it due to

its inherent chemical or biological effects. In respect of substances whose TLV is specified in Rule-

131exceeding the concentration specified therein would make the substance toxic;

(j)

―emergency‖ means a situation or condition leading to a circumstance or set of

circumstances in which there is danger to the life or health of persons or which could result in big

fire or explosion or pollution to the work and outside environment, affecting the workers or

neighborhood in a serious manner, demanding immediate action;

(k)

―dangerous chemical reactions‖ means high speed reactions, runaway reactions, delayed

reactions, etc. And are characterized by evolution of large quantities of heat, intense release of

toxic or flammable gases or vapours, sudden pressure build-up etc.;

(l)

―manipulation‖ means mixing, blending, filling, emptying, grinding, sieving, drying, packing,

sweeping, handling, using, etc.;

(m)

―approved personal protective equipment‖ means items of personal protective equipment

conforming to the relevant ISI specifications or in the absence of it, personal protective equipment

approved by the Chief Inspector- cum-Facilitator;

(n)

―appropriate personal protective equipment‖ means that when the protective equipment is

used by the worker, he shall have no risk to his life or health or body; and

(o)

―confined space‖ means any space by reason of its construction as well as in relation to the

nature of the work carried therein and where hazards to the persons entering into or working

inside exist or are likely to develop during working.

PART II

General Requirements

Applying to all the works in Appendix `A‘

1.

Housekeeping –

(1)

Any spillage of materials shall be cleaned up before further processing.

(2)

Floors, platforms, stairways, passages and gangways shall be free of any obstructions.

(3)

There shall be provided easy means of access to all parts of the parts of the plant to

facilitate cleaning.

2.

Improper use of chemicals-No chemicals or solvents or empty containers containing

chemicals or solvents shall be permitted to be used by workers for any purpose other than in the

processes for which they are supplied.

3.

Prohibition on the use of food to be specified clearly – No food, drink, tobacco, pan or

any edible item shall be stored or heated or consumed on or near any part of the plant or

equipment.

4.

Cautionary Notices and Instructions –

(1)

Cautionary notices in a language understood by the majority of workers shall be

prominently displayed in all hazardous areas drawing the attention of all workers about the

hazards to health, hazards involving fire and explosion and any other hazard such as consequences

of testing of material or substances used in the process or using any contaminated container for

drinking or eating, to which the workers‘ attention should be drawn for ensuring their safety and

health.

284

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(2)

In addition to the above cautionary notice, arrangement shall be made to instruct and educate

all the workers including illiterate workers about the hazards in the process including the specific

hazards to which they may be exposed to, in the normal course of their work. Such instructions and

education should also deal with the hazards involved in unauthorized and unsafe practices

including

the properties of substances used in the process under normal conditions as well as abnormal

conditions and the precautions to be observed against each and every hazard. Further, an

undertaking from the workers shall be obtained within one month of their employment to the

effect that they have read the contents of the cautionary notices and instructions, understood them

and would abide by them. The training and instructions to all workers and all supervisory personnel

shall include the significance of different types of symbols and colours used on the labels stuck or

painted on the various types of containers and pipe lines.

5.

Evaluation and provision of safeguards before the commencement of process –

(1)

Before commencing any process or any experimental work, or any new manufacture

covered under Appendix `A‘, the occupier shall take all possible steps to ascertain definitely all the

hazards involved both from the actual operations and the chemical reactions including the

dangerous chemical reactions. The properties of the raw materials used, the final products to be

made and any by-products derived during manufacture, shall be carefully studied and provisions shall

be made for dealing with any hazards including effects on workers, which may occur during

manufacture.

(2)

Information in writing giving details of the process, its hazards and the steps taken or

proposed to be taken from the design stage to disposal stage for ensuring the safety as in sub-

paragraph (1) should be sent to the Chief Inspector-cum-Facilitator at the earliest but in no case

less than 15 days before commencing manufacture, handling, or storage of any of items covered

under Appendix `A‘, whether on experimental basis, or as pilot plant or as trial production, or as

large scale manufacture.

(3)

The design, construction, installation, operation, maintenance and disposal of the buildings,

plant and facilities shall take into consideration effective safeguards against all the safety and

health hazards so evaluated.

(4)

The requirements under the sub-Paragraphs (1) (2) and (3) shall not act in lieu of or in

derogation to, any other provisions contained in any Act governing the work.

6.

Authorized entry – Authorized persons only shall be permitted to enter any section of

the factory or plant where any dangerous operations or processes are being carried on or where

dangerous chemical reactions are taking place or where hazardous chemicals are stored.

7.

Examination of instruments and safety devices –

(1)

All instruments and safety devices used in the process shall be tested before taking into

use and after carrying out any repair to them and examined once in six months, by a competent

person.

(2)

All instruments and safety devices used in the process shall be operated daily or as often as it

is necessary, to ensure its effective and efficient working at all times.

8.

Electrical installations – All electrical installations used in the process covered in

Appendix `A‘ shall be of an appropriate type to ensure safety against the hazard prevalent in that

area such as suitability against dust, dampness, corrosion, flammability and explosively etc. And

shall confirm to the relevant ISI specifications governing their construction and use for that area.

9.

Handling and storage of chemicals –

(1)

The containers for handling and storage of chemicals shall be of adequate strength taking

into consideration the hazardous nature of the contents. They shall also be provided with adequate

labelling and colour coding arrangements to enable identification of the containers and their contents

indicating the hazards and safe handling methods and shall conform to the respective ISI standards.

[PART IV

DELHI GAZETTE : EXTRAORDINARY

285

The instructions given in the label shall be strictly adhered to. Damaged containers shall be

handled only under supervision of a knowledgeable and responsible person and spillage shall be

rendered innocuous in a safe manner using appropriate means.

(2)

The arrangements for the storage of chemicals including charging of chemicals in

reaction vessels and containers shall be such as to prevent any risk of fire or explosion or

formation of toxic concentration of substances above the limits specified in these Rules.

(3)

Without prejudice to the generality of the requirements in sub- Para (2) above, the

arrangements shall have suitable ventilation facilities and shall enable the maintenance of safe levels

in vessels and containers. Such arrangements

shall also take into consideration, the type of flooring and the capacity of flooring and the compatibility

requirements of substances with other chemicals stored nearby.

(4)

(a) Storage of chemicals and intermediate products, which are highly unstable or reactive

or explosive, shall be limited to the quantities required for two months.

(b)

Whenever the quantities laid down in the above clause (a) are to be exceeded, the

permission of the Chief Inspector-cum-Facilitator shall be obtained.

(c)

Notwithstanding anything contained in clause (a) and (b) above, the Chief Inspector-cum-

Facilitator may direct any factory carrying out processes covered in Appendix `A‘ to further limit the

storage of hazardous substances to quantities less than two months on considerations of safety.

(5)

Standby arrangements equal to the biggest container shall always be available to transfer

the toxic substances quickly into the standby storage facility if any defect develops in any of the

container resulting in the release of toxic substances.

(6)

Any storage facility constructed using non-metallic material such as Fiber glass Reinforced

Plastics (FRP), all glass vessels etc., shall have adequate strength to withstand the stress, if any,

exerted by the contents and shall be properly anchored. Working platforms, access ladders,

pipelines etc. used in such storage facility shall not have any support on the structure of the

storage facility and shall be independently supported.

10.

Facility for isolation – The plant and equipment shall be so constructed and maintained as

to enable quick isolation of plant or part of plant or equipment, with appropriate indication. One copy

of the layout plan indicating the isolation facilities shall always be available with the security

personnel, the maintenance and the health and safety personnel and these isolation facilities shall be

checked for its effectiveness once in a month.

11.

Personal protective equipment –

(1)

All workers exposed to the hazards in the processes covered by this Schedule shall be

provided with appropriate and approved type of personal protective equipment. Such equipment

shall be in a clean, sterile and hygienic condition before issue.

(2)

The occupier shall arrange to inform, educate and supervise all the workers in the use of

personal protective equipment while carrying out the job.

(3)

As regards any doubt regarding the appropriateness of any personal protective equipment,

the decision of the Chief Inspector-cum-Facilitator will be final.

12.

Alarm Systems –

(1)

Suitable and effective alarm systems giving audible and visible indications, shall be installed at

the control room as well as in all strategic locations where process control arrangements are

available so as to enable corrective action to be taken before the operational parameters exceed the

predetermined safe levels or lead to conditions conducive for an outbreak of fire or explosion to

occur. Such alarm systems shall be checked daily and tested every month at least once to ensure

its performance efficiency at all times.

(2)

The Chief Inspector-cum-Facilitator may direct such system to be installed in case of plants or

286

DELHI GAZETTE : EXTRAORDINARY

PART IV]

processes where toxic materials are being used and spillage or leakage of which may cause wide

spread poisoning in or around the plant.

13.

Control of escape of substances into the work atmosphere –

(1)

Effective arrangements such as, enclosure, or by pass, or efficient exhaust draught,

maintenance of negative pressure etc., shall be provided in all plants, containers, vessels, sewers,

drains, flues, ducts, culverts, and buried pipes and equipment, to control the escape and spread or

substances which are likely to give rise to fire or explosion or toxic hazards during normal working

and in the event of accident or emergency.

(2)

In the event of the failure of the arrangements for control resulting in the escape of

substances in the work atmosphere immediate steps shall be taken to control the process in such a

manner, that further escape is brought down to the safe level.

(3)

the substances that would have escaped into the work atmosphere before taking immediate

steps as required in sub-Para (2), shall be rendered innocuous by diluting with air or water or any

other suitable agent or by suitably treating the substances.

14.

Control of dangerous chemical reactions – Suitable provision, such as automatic and or

remote-control arrangements, shall be made for controlling the effects of dangerous chemical

reactions‘. In the event of failure of control arrangements automatic flooding or blanketing or other

effective arrangements shall come into operation.

15.

Testing, examination and repair of plant & equipment –

(1)

All parts of plant, equipment and machinery used in the process which in the likely event of

their failure may give rise to an emergent situation shall be tested by a competent person before

commencing process and retested at an interval of two years or after carrying out repairs to it.

The competent person shall identify the parts of the plant, equipment and machinery required to

be tested as aforesaid and evolve a suitable testing procedures. In carrying out the test mentioned

above in respect of pressure vessels or reaction vessels the following precautions shall be

observed, namely –

(a)

before the test is carried out, each vessel shall be thoroughly cleaned and examined

externally, and as far as practicable, internally also for surface defects, corrosion and foreign matters.

During the process of cleaning and removal of sludge, if any, all due precautions shall be taken

against fire or explosion, if such sludge is of pyrophoric nature or contains spontaneously

combustible chemicals;

(b)

as soon as the test is completed, the vessel shall be thoroughly dried internally and shall

be clearly stamped with the marks and figures indicating the person by whom testing has been

done, and the date of test;

(c)

and any vessel which fails to pass the test or which for any other reason is found to be

unsafe for use shall be destroyed or rendered unusable under intimation to the Chief Inspector-

cum-Facilitator.

(2)

All parts of plant, equipment, machinery which is the likely event of failure may give rise to

an emergent situation shall be examined once in a month by the competent person.

(3)

Records of testing and examination referred to in paragraphs (1) and (2) shall be

maintained as long as that part of the plant, equipment and machinery are in use.

(4)

All repair work including alteration, modification and addition to be carried out to the plant,

equipment and machinery shall be done under the supervision of a responsible person who shall

evolve a procedure to ensure safety and health of persons doing the work. When repairs or

modification is done on pipelines, and joints are required to be welded, butt welding of joints

shall be preferred. Wherever necessary, the responsible person shall regulate the aforesaid work

through a ‗Permit to work system‘.

16.

Staging –

(1)

All staging that is erected for the purpose of maintenance work or repair work or for work

[PART IV

DELHI GAZETTE : EXTRAORDINARY

287

connected with entry into confined spaces and used in the processes included in Appendix `A‘,

shall be stable, rigid and constructed out of substantial material of adequate strength. Such staging

shall conform to the respective Indian Standard specifications.

(2)

Staging shall not be erected over any closed or open vessel unless the vessel is so

constructed and ventilated to prevent exposure of persons working on the stages.

(3)

All the staging constructed for the purpose of this Paragraph shall have appropriate access

which are safe and shall be fitted with proper hand rails to a height of one meter and toe board.

17.

Seating Arrangements – The seating arrangements provided for the operating personnel

working in processes covered in Appendix `A‘ shall be located in a safe manner as to prevent the

risk of exposure to toxic, flammable and explosive substances evolved in the work environment in

the course of manufacture or repair or maintenance, either due to failure of plant and equipment

or due to the substances which are under pressure, escaping into the atmosphere.

18.

Entry into or work in confined spaces –

(1) The occupier of every factory to which the provisions of this schedule apply, shall ensure the

observance of the following precautions before permitting any person to enter or work inside the

confined spaces –

(a)

identify all confined spaces and the nature of hazards that are encountered in such spaces,

normally or abnormally, and arrange to develop the most appropriate safeguards for ensuring the

safety and health of persons entering into or working inside, the confined spaces;

(b)

regulate the entry or work inside the confined spaces through a `permit to work system‘

which should include the safeguards so developed as required under sub-clause (a) above;

(c)

before testing the confined space for entry into or work, the place shall be rendered safe

by washing or cleaning with neutralizing agents; or purging with steam or inert gases and making

adequate forced ventilation arrangements or such measure which will render the confined space

safe;

(d)

Shall arrange to carry out such tests as are necessary for the purpose by a competent

person and ensure that the confined space is safe for the persons to enter or work. Such testing

shall be carried out as often as is necessary during the course of work to ensure its continued

safety;

(e)

shall arrange to educate and train the personnel who would be required to work in

confined spaces about the hazards involved in the work. He shall also keep in readiness the

appropriate and approved personal protective equipment including arrangements for, rescue

resurrection and first aid, and shall arrange supervision of the work at all times by a responsible

and knowledgeable person.

(f)

The occupier shall maintain a log of all entry into or work in, confined spaces and such

record shall contain the details of persons assigned for the work, the location of the work and such

other details that would have a bearing on the log book so maintained shall be retained as long as

the concerned workers are in service and produces to the Inspector-cum-Facilitator when

demanded.

19.

Maintenance work etc. –

(1)

All the work connected with the maintenance of plants and equipment including cleaning

of empty containers which have held hazardous substances used in the processes covered in this

Schedule, shall be carried out under

`permit to work system‘ employing trained personnel and under the supervision of responsible person,

having knowledge of the hazards and precautions required to deal with them.

(2)

Maintenance work shall be carried out in such a manner that there is no risk to persons in

the vicinity or to persons who pass by. If necessary, the place of such work shall be cordoned off or

288

DELHI GAZETTE : EXTRAORDINARY

PART IV]

the presence of unconnected persons effectively controlled.

20.

Permit to work system – The permit to work system shall inter-alia include the

observance of the following precautions while carrying out any specified work to be subjected to

the permit to work system –

(a)

all work subject to the permit to work system shall be carried out under the supervision of a

knowledgeable and responsible person;

(b)

all parts of plant or machinery or equipment on which permit to work system is carried

out, shall remain isolated from other parts throughout the period of permit to work and the place

of work including the parts of plant, machinery shall be rendered safe by cleaning, purging,

washing, etc.;

(c)

All work subject to the permit to work system shall have predetermined work procedures

which integrate safety with the work. Such procedures shall be reviewed whenever any change

occurs in material or equipment so that continued safety is ensured;

(d)

persons who are assigned to carry out the permit to work system shall be physically fit in

all respects taking into consideration the demands and nature, of the work before entering into the

confined space. Such person shall be adequately informed about the correct work procedures as

well as the precautions to be observed while carrying out the permit to work system;

(e)

adequate rescue arrangements wherever considered necessary and adequate first aid,

rescue and resurrection arrangements shall be available in good working condition near the place of

work while carrying out the permit to work system, for use in emergency;

(f)

appropriate and approved personal protective equipment shall be used while carrying out the

`permit to work system‘;

(g)

after completion of work subject to the `permit to work system‘ the person responsible shall

remove all the equipment and tools and restore to the original condition so as to prevent any danger

while carrying out regular process.

21.

Safety sampling personnel – The occupier shall ensure the safety of persons assigned

for collecting samples by instructing them on the safe procedures. Such personnel shall be provided

with proper and approved personal protective equipment, if required.

22.

Ventilation – Adequate ventilation arrangements shall be provided and maintained at all

times in the process area where dangerous or toxic or flammable or explosive substances could be

evolved. These arrangements shall ensure that concentrations, which are either harmful or could

result in explosion, are not permitted to be built up in the work environment.

23.

Procedures for meeting emergencies –

(1)

The occupier of every factory carrying out the works covered in Appendix

`A‘, shall arrange to identify all types of possible emergencies that could occur in the processes

during the course of work or while carrying out maintenance work or repair work. The

emergencies so identified shall be reviewed every year.

(2)

The occupier shall formulate a detailed plan to meet all such identified emergencies

including arrangements for summoning outside help for rescue and firefighting arrangements for

making available urgent medical facilities.

(3)

The occupier shall send the list of emergencies and the details of procedures and plans

formulated to meet the emergencies, to the Chief Inspector-cum- Facilitator.

(4)

The occupier shall arrange to install distinctive and recognizable warning arrangements to

caution all persons inside the plant as well as the neighboring community, if necessary, to enable

evacuation of persons and to enable the observance of emergency procedures by the persons who

are assigned emergency duties. All concerned must be well informed about the warning

arrangements and their meaning. The arrangements must be checked for its effectiveness every

month.

(5)

Alternate power supply arrangements shall be made and interlocked with the normal

[PART IV

DELHI GAZETTE : EXTRAORDINARY

289

power supply system so as to ensure constant supply of power to the facilities and equipment

meant for compliance with requirements of Paragraphs 10, 11, 12, 13,14, 18, 22, and this

paragraph of Part II, Part III, Part IV and Part V of this Schedule.

(6)

The occupier shall arrange to suspend the further process work in a place where

emergency is established and shall forthwith evacuate all persons in that area except workers

who have been assigned emergency duties.

(7)

All the employees of the factory shall be trained about the action to be taken by them

including evacuation procedures during emergencies.

(8)

All emergency procedures must be rehearsed every three months and deficiencies, if any,

in the achievement of the objectives shall suitably be corrected.

(9)

The occupier shall arrange to have ten percent of the workers trained in the use of First

Aid Fire Fighting appliances and in the rendering of specific hazards of the particular process.

(10)

The occupier shall furnish immediately on request the specific chemical identity of the

hazardous substance to the treating physician where the information is needed to administer

proper emergency or first-aid treatment to exposed persons.

24.

Danger due to effluents –

(1)

Adequate precautions shall be taken to prevent the mixing of effluents from different

processes and operations which may cause dangerous or poisonous gases to be evolved.

(2)

Effluents which contain or give rise in the presence of other effluents to poisonous gases

shall be provided with independent drainage systems to ensure that they may be trapped and

rendered safe.

PART III

Fire and Explosion Risks

1.

Sources of ignition including lighting installation.-

(1)

No internal combustion engine and no electric motor or other electrical equipment, and

fittings and fixtures capable of generating sparks or otherwise causing combustion or any other

source of ignition or any naked light shall be installed or permitted to be in the process area where

there could be fire and explosion hazards.

(2)

All hot exhaust pipes shall be installed outside a building and other hot pipes or hot surface or

surfaces likely to become hot shall be suitably protected.

(3)

The classification of work areas in terms of its hazard potential and the selection of

electrical equipment or other equipment that could constitute a source of ignition shall be in

accordance with the respective Indian Standard.

(4)

Where a flammable atmosphere may be prevalent or could occur, the soles of footwear

worn by workers shall have no metal on them, and the wheels of trucks or conveyors shall be

conductive type.

(5)

All tools and appliances used for work in this area shall be of non-sparking type.

(6)

Smoking in process areas where there are risks of fire and explosion shall be prohibited,

and warning notices in the language understood by majority of workers shall be posted in the

factory prohibiting smoking into specified areas.

2.

Static Electricity –

(1)

All machinery and plant, particularly, pipe lines and belt drives, on which static charge is

likely to accumulate, shall be effectively earthed. Receptacles for flammable liquids shall have

metallic connections to the earthed supply tanks to prevent statics parking. Where necessary,

humidity shall be regulated.

(2)

Mobile tanker wagons shall be earthed during filling and discharge, and precautions shall

290

DELHI GAZETTE : EXTRAORDINARY

PART IV]

be taken to ensure that earthing is effective before such filling or discharge take place.

3.

Lightning protection – Lightening protection arrangement shall be fitted where

necessary, and shall be maintained.

4.

Process heating – The method of providing heat for a process likely to result in fire and

explosion shall be as safe as possible and where the use of naked flame is necessary, the plant

shall be so constructed as to prevent any escaping flammable gas, Vapour, or dust coming into

contact with the flame, or exhaust gases, or other sources likely to cause ignition. Wherever

possible, the heating arrangement shall be automatically controlled at a pre-determined

temperature below the danger temperature.

5.

Leakage of flammable liquids –

(1)

Provision shall be made to confine by means of bund walls, dykes, sumps etc. Possible

leakages from storage vessels containing flammable liquids.

(2)

Waste material in contact with flammable substances shall be disposed offsuitably under

the supervision of knowledgeable and responsible person.

(3)

Adequate and suitable fire-fighting appliances shall be installed in the vicinity of such vessels.

6.

Safety valves – Every still and every closed vessel which gas is evolved or into which gas

is passed, and in which the pressure is liable to rise above the atmospheric pressure, shall have

attached to it a pressure gauge, and a proper safety valve or other equally efficient means to

relieve the pressure. These appliances shall be maintained in good condition.

7.

Installation of pipe line etc. – All pipelines carrying flammable or explosive substances

shall be protected from mechanical damage and shall be examined by a responsible person once a

week to detect any deterioration or defects, or accumulation of flammable or explosive

substances, and record kept of any defects found and repairs made.

8.

Firefighting systems –

(1)

Every factory employing 250 or more persons and carrying out processes listed in

Appendix `A‘ shall provide –

(a)

Trained and responsible firefighting squad so as to effectively handle the fire fighting and

lifesaving equipment in the event of fire or another emergency. Number of persons in this squad

will necessarily depend upon the size of risk involved, but in no case shall be less than 8 such

trained persons to be available at any time. The squad shall consist of watch & ward personnel,

fire pump man and departmental supervisors and operators trained in the operation of fire &

emergency services.

(b)

Squad leaders shall preferably be trained in a recognised government institution and their

usefulness enhanced by providing residence on the premises.

(c)

Squad personnel shall be provided with clothing and equipment including helmets, boots

and belts.

(2)

A muster roll showing the duties allocated to each member of the squad shall be prepared

and copies supplied to each leader as well as displayed in prominent places so as to be easily

available for reference in case of emergency.

(3)

The pump man shall be thoroughly conversant with the location of all appliances. He shall

be responsible for maintaining all firefighting equipment in proper working order. Any defect

coming to his notice shall be immediately be brought to the notice of squad leader.

(4)

As far as is practicable, the fire pump room and the main gate(s) of the factory be

connected to all manufacturing or storing areas through telephone inter lined and placed in a

convenient location near such areas.

[PART IV

DELHI GAZETTE : EXTRAORDINARY

291

PART IV

Risks of Toxic Substances

1.

Leakage –

(1)

All plants shall be so designed and constructed as to prevent the escape of toxic substance.

Where necessary, separate buildings, rooms, or protective structures shall be used for the

dangerous stages of the process and buildings shall be so designed as to localize any escape of

toxic substances.

(2)

Catch pits, bund walls, dykes, or other suitable safeguards shall be provided to restrict the

serious effects of such leakages. Catch pits shall be placed below joints in pipelines where there

is danger involved to maintenance and other workers from such leakage.

2.

Drainage – Adequate drainage shall be provided and shall lead to collection tanks

specifically provided for this purpose wherein deleterious material shall be neutralized, treated or

otherwise rendered safe before it is discharged into public drains or sewers.

3.

Covering of vessels –

(1)

Every fixed vessel or structure containing any toxic substance and not so covered as to

eliminate all reasonable risk of accidental contact of any portion of the body of a worker, shall be

so constructed as to avoid physical contact.

(2)

Such vessel shall, unless its edge is at least 90 centimeters above the adjoining ground or

platform, be securely fenced to a height of at least 90 centimeters above such adjoining ground or

platform.

(3)

Where such vessels adjoin and the space between them, clear of any surrounding brick or

other work is either less than 45 centimeters in width or is 45 or more centimeters in width, but is

not securely fenced on both sides to a height of at least 90 centimeters, secure barriers shall be so

placed as to prevent passage between them :

Provided that sub-paragraph (2) of this paragraph shall not apply to –

(a)

saturators used in the manufacture of sulphate of ammonia; and

(b)

That part of the sides of brine evaporating pans which require raking, drawing or filling.

4.

Continuous exhaust arrangement –

(1)

Any process evolving toxic Vapour, gas, fume and substance shall have efficient

continuous exhaust draught. Such arrangement shall be interlocked in the process control wherever

possible.

(2)

In the event of failure of continuous exhaust arrangement means shall be provided to

automatically stop the process.

5.

Work Bench – All the work benches used in the processes involving the manipulation of

toxic substances, shall be graded properly and shall be made of smooth impervious surface which

shall be washed daily after the completion of work.

6.

Waste disposal –

(1)

There shall be provided a suitable receptacle made of non-absorbable material with a

tightly fitting cover for depositing waste material soiled with toxic substances and the contents of

such receptacle shall be destroyed by burning or using other suitable methods under the

supervision of a responsible person.

(2)

During the course of manufacture, whenever any batch or intermediate products having

toxicity is rejected on considerations of quality, sufficient precautions shall be taken to render

them innocuous or otherwise treat them or inactivate them, before disposal.

(4) The empty containers of toxic substances shall be cleaned thoroughly before disposal under the

supervision of a responsible person.

292

DELHI GAZETTE : EXTRAORDINARY

PART IV]

PART V

Special Provisions

1.

Special precautions for Nitro or Amino Processes –

(1)

Unless the crystallized intro or amino substances or any of its liquor is broken or agitated

in a completely enclosed process so as not to give rise to dust or fume, such process shall be

carried on under an efficient exhaust draught or by adopting any other suitable means in such a

manner as to prevent

the escape of dust or fume in the working atmosphere.

(2)

No part of the plant or equipment or implements which was in contact with nitro or amino

compounds shall be repaired, or handled unless they have been emptied and thoroughly cleaned

and decontaminated.

(3)

Filling of containers with nitro or amino compounds shall be done only by using a suitable

scoop to avoid physical contact and the drying of the containers in the store shall be done in such a

manner that the hot and contaminated air from the stove is not drawn into the work room.

(4)

Processes involving the steaming into or around any vessel containing nitro or amino

compounds or its raw materials shall be carried out in such a manner that the steam or Vapour is

effectively prevented to be blown back into the working atmosphere.

(5)

Suitable antidotes such as methylene blue injections shall always be available at designated

places of work for use during emergency involving the poisoning with nitro or amino compounds.

2.

Special precautions for `chrome processes –

(1)

Grinding and sieving of raw materials in chrome processes shall be carried on in such a

manner and under such condition as to secure effective separation from any other processes and

under an efficient exhaust draught.

(2)

There shall be washing facilities located very near to places where wet chrome processes

such as leaching, acidification, sulphate settling, evaporation, crystallization, centrifugation or

packing are carried out, to enable quick washing of affected parts of body with running water.

(3)

Weekly inspection of hand and feet of all persons employed in chrome process shall be

done by a qualified nurse and record of such inspections shall be maintained in a form approved by

the Chief Inspector-cum-Facilitator.

(4)

There shall be always available at designated places of work suitable ointment such as

glycerin, Vaseline, etc. And water proof plaster in a separate box readily accessible to the

workers so as to protect against perforation of nasal septum.

3.

Special precautions for processes carried out in all glass vessels –

(1)

Processes and chemical reactions such as manufacture of vinyl chloride,

benzyl chloride etc. Which are required to be carried out in all glass vessels shall have suitable

means like substantial wire mesh covering to protect persons working nearby in the event of

breakage of glass vessel.

(2)

Any spillage or emission of Vapour from the all-glass vessel due to breakage, shall be

immediately inactivated or rendered innocuous by suitable means such as dilution with water or

suitable solvents so as to avoid the risks of fire or explosion or health hazards.

4.

Special precautions for processes involving chlorate manufacture –

(1)

Crystallization, grinding or packing of chlorate shall not be done in a place used for any

other purpose and such places shall have hard, smooth and impervious surface made of non-

combustible material. The place shall be thoroughly cleaned daily.

(2)

The personal protective equipment likes overall, etc. Provided for the chlorate workers

shall not be taken from the place of work and they shall be thoroughly cleaned daily.

(3)

Adequate quantity of water shall be available near the place of chlorate process for use

during fire emergency.

(4)

Wooden vessels shall not be used for the crystallization of chlorate or to contain

[PART IV

DELHI GAZETTE : EXTRAORDINARY

293

crystallized ground chlorate.

5.

Special precautions in the use of plant and equipment made from reinforced

plastics –

(1)

All plant and equipment shall conform to appropriate Indian or any other National

Standard.

(2)

Care shall be taken during storage, transport, handling and installation of plant and

equipment to avoid accidental damage.

(3)

All plant and equipment shall be installed in such a way as to ensure that loads are

distributed as intended in design or as per the recommendations of the manufacture.

(4)

All pipe work shall be supported so that total loads local to the branches on the vessel or

tank do not exceed their design values.

(5)

After erection all plant and equipment shall be subjected to a pressure test followed by a

thorough examination by a competent person. The test and examination shall be as per

relevant Standard. A certificate of test andexamination by a competent person shall be obtained

and kept available at site.

(6)

All plant and equipment shall be subjected to periodical test and examination and record

maintained as per Paragraph 15 in Part II of this Schedule

(7)

Plant and equipment during their use shall not be subjected to over filling or overloading

beyond rated capacity.

PART VI

Medical Requirements

1.

Decontamination facilities – In all places where toxic substances are used in processes

listed in Appendix `A‘ the following provisions shall be made to meet an emergency:

(a)

fully equipped first aid box;

(b)

readily accessible means of drenching with water persons, parts of body of persons, and

clothing of persons who have been contaminated with such toxic and corrosive substances, and

such means shall be as shown in the Table below:-

No. of persons employed at any

No. of drenching showers time

Up to 50 persons

2

Between 51 to 100

3

101 to 200

3 + 1 for every 50 persons thereafter

201 to 400

5 + 1 for every 100 persons thereafter

401 and above 7 + 1 for every 200 persons thereafter

(c)

a sufficient number of eye wash bottles filled with distilled water or suitable liquid, kept in

boxes or cupboards conveniently situated and clearly indicated by a distinctive sign which shall be

visible at all times.

2.

Occupational health center – In all the factories carrying out processes covered in

Appendix `A‘ there shall be provided and maintained in good order an occupational health center

with facilities as per scale laid down hereunder

294

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(1)

For factories employing up to fifty workers –

(a)

the services of a qualified medical practitioner hereinafter known as Factory Medical Officer,

available on a retainer ship basis, in his notified clinic near to the factory for seeking medical help

during emergency. He will also carry out the pre-employment and periodical medical

examinations as stipulated in paragraph 4 of this Part.

(b)

A minimum of five persons trained in first aid procedures, amongst whom at least one shall

always be available during the working period.

(c)

A fully equipped first aid box.

(2)

For factories employing 51 to 200 workers –

(a)

The occupational health center shall have a room having a minimum floor area of 15 sq.m.,

with floors and walls made of smooth, hard and impervious surface and shall be adequately

illuminated, ventilated and equipped.

(b)

A part-time Medical Officer will be in overall charge of the Centre who shall visit the

factory minimum twice in a week and whose services shall be readily available during

emergencies.

(c)

There shall be one qualified and trained dresser-cum-compounder on duty throughout the

working period.

(d)

A fully equipped first aid box.

(3)

For factories employing above 200 workers –

(a)

There shall be one full-time Factory Medical Officer for factories employing up to 500

workers and one more medical officer for every 1000 workers or part thereof.

(b)

The occupational health center in this case shall have a minimum of 2 rooms each having

a minimum floor area of 15 sq.m. with floors and walls made of smooth, hard and impervious

surface and shall be adequately illuminated, ventilated and equipped.

(c)

There shall be one trained nurse, one dresser-cum-compounder and one sweeper-cum-

ward boy throughout the working period.

(d)

The Occupational Health Centre in this case shall be suitably equipped to manage medical

emergencies.

3.

Ambulance van –

(1)

In every factory carrying out processes covered in Appendix `A‘, there shall be provided

and maintained in good condition, a suitably constructed and fully equipped ambulance van as per

Appendix `C‘ manned by a full-time driver- cum mechanic and a helper, trained in first aid for the

purposes of transportation of serious cases of accidents or sickness unless arrangements for

procuring such facility at short notice during emergencies have been made with the nearby

hospital or other places. The ambulance van shall not be used for any purpose other than the

purpose stipulated herein and will always be available near the Occupational Health Centre.

(2)

The relaxation to procure Ambulance Van from nearby places provided for in sub para (1)

above will not be applicable to factories employing more than 500 workers.

4.

Medical examination –

(1)

Workers employed in processes covered in Appendix `A‘ shall be medically examined by

Medical Officer in the following manner –

i.

Once before employment, to ascertain physical suitability of the person to do the particular

job;

ii.

Once in a period of 6 months, to ascertain the health status of the worker, and

iii

The details of pre-employment and periodical medical examinations carried out as aforesaid

shall be recorded in the prescribed Form-24 and 25.

(2)

Any finding of the Medical Officer revealing any abnormality or unsuitability of any person

employed in the process shall immediately be reported to the Medical officer who shall in turn,

examine the concerned workers and communicate his findings within 30 days. If the Medical officer

[PART IV

DELHI GAZETTE : EXTRAORDINARY

295

is of the opinion that the person so examined is required to be suspended from the process for

health protection he will direct the occupier accordingly, who shall not employ the said worker in

the same process. However, the person so suspended from the process shall be provided with

alternate placement facilities unless he is fully incapacitated in the opinion of the Medical

officer, in which case the person affected shall be suitably rehabilitated :

Provided that the Medical officer on his own may examine any other worker

whom he feels necessary to be examined for ascertaining the suitability of his employment in the

process covered in Appendix `A‘ or for ascertaining the health status of any other worker and his

opinion shall be final.

(3)

No person shall be newly appointed without the Certificate of Fitness granted by the Medical

Officer. If the Medical Officer declares a person unfit for being appointed to work in the process

covered in Appendix `A‘, such person shall have a right of appeal to the Medical officer, whose

opinion shall be final in this regard.

(4)

The worker suspended from the process owing to the circumstances covered in sub-

paragraph (2) shall be employed again in the same process only after obtaining the Fitness

Certificate from the Medical officer and after making entries to that effect in the health register.

PART VII

Additional Welfare Amenities

1.

Washing facilities –

(1)

There shall be provided and maintained in every factory for the use of all the workers taps

for washing, at the rate of one every 15 persons including liquid soap in a container with tilting

arrangements and nail brushes or other suitable means for effective cleaning. Such facilities shall

be conveniently accessible and shall be kept in a clean and hygienic condition.

(2)

If washing facilities as required above are provided for women, such facilities shall be separate

for them and adequate privacy at all times shall be ensured in such facilities.

2.

Mess room facilities –

(1)

The occupier of all the factories carrying out processes covered in Appendix

`A‘ and employing 50 workers or more, shall provide for all the workers working in a shift mess room

facilities which are well ventilated and provided with tables and sitting facilities along with the

provision of cold and hygienic drinking water facilities.

(2)

Such facilities shall include suitable arrangements for cleaning and washing and shall be

maintained in a clean and hygienic condition.

3.

Cloakroom facilities –

(1)

The occupier of every factory carrying out any process covered in Appendix

`A‘ shall provide for all the workers employed in the process cloak room facilities with lockers. Each

worker shall be provided with two lockers, one for work clothing and another separately for

personal clothing and the lockers should be such as to enable the keeping of the clothing in a

hanging position.

(2)

The cloak room facilities provided in pursuance of sub-para (1) shall be located as far as

possible near to the facilities provided for washing in pursuance of para 1(1). If it is not possible to

locate the washing facilities the cloakroom facilities shall have adequate and suitable arrangements

for cleaning & washing.

4.

Special bathing facilities –

(1)

The occupier of any factory carrying out the process covered under Appendix

`B‘ shall provide special bathing facilities for all the workers employed and such facilities shall

be provided at the rate of 1 for 25 workers or less workers than 25 workers, and shall be maintained

296

DELHI GAZETTE : EXTRAORDINARY

PART IV]

in a clean and hygienic condition.

(2)

The occupier shall insist all the workers employed in the processes covered in Appendix `B‘

to take bath after the completion of the day‘s or shift work using the bathing facilities so provided

and shall also effectively prevent such of those workers taking bath in any place other than the

bathing facilities.

(3)

Notwithstanding anything contained in sub-para (1) above, the Chief Inspector-cum-

Facilitator may require in writing the occupier of any factory carrying out any other process for

which his opinion bathing facilities are essential from the health point of view, to provide special

bathing facilities.

PART VIII

1. Duties of workers –

(1)

Every worker employed in the processes covered in Appendix ‗A‘ and Appendix ‗B‘

shall not make safety device or appliance or any guarding or fencing arrangement, inoperative or

defective and shall report the defective condition of the aforesaid arrangements as soon as he is

aware of any such defect.

(2)

Before commencing any work, all workers employed in processes covered in Appendix ‗A‘

shall check their workplace as well as the machinery, equipment or appliance used in the processes

and report any mal-function or defect immediately to the supervisor or any responsible person of

the management.

(3)

All workers shall co-operate in all respects with the management while carrying out any

work or any emergency duty assigned to them in pursuance of this schedule and shall always use

all the personal protective equipment issued to them in a careful manner.

(4)

All workers employed in the processes covered in Appendix `A‘ or Appendix

`B‘ shall not smoke in the process area or storage area. If special facilities are provided by the

management only such facilities should be used.

(5)

All workers employed in the processes covered in Appendix `A‘ shall not remain an

unauthorized place or carry cut unauthorized work or improvise any arrangement or adopt short out

method or misuse any of the facilities provided in pursuance of the Schedule, in such a manner as

to cause risk to themselves as well as or to others employed.

(6)

The workers shall not refuse undergoing medical examination as required under these

rules.

PART IX

Restrictions on the employment of Women and Adolescent

(1)

The Chief Inspector-cum-Facilitator may by an order in writing, restrict or prohibit the

employment of women and adolescent , in any of the processes covered in Appendix `A‘ of this

schedule on considerations of health and safety of women and young persons.

(2)

Such persons who are restricted or prohibited from working in the process due to the order

issued in pursuance of sub-para (1) above shall be provided with alternate work which is not

detrimental to their health or safety.

PART X

Exemptions

(1)

Power of exemption – The Government or subject to the control of the Government the

Chief Inspector-cum-Facilitator may exempt from the compliance with any of the requirements of

this Schedule partly or fully, any factory carrying out processes covered in Appendix `A‘, if it is

clearly and satisfactorily established by the occupier that the compliance with any of the

requirement is not necessary to ensure the safety and health of persons employed suitable and

effective alternate arrangements are available to any of the requirements covered in this schedule.

[PART IV

DELHI GAZETTE : EXTRAORDINARY

297

Appendix `A’

Any works or that part of works in which –

(a)

the manufacture, manipulation or recovery of any of the following is carried on :-

(i)

sodium, potassium, iron, aluminum, cobalt, nickel, copper, arsenic, antimony, chromium, zinc,

selenium, magnesium, cadmium, mercury, beryllium and their organic and inorganic salts, alloys,

oxides and hydroxides;

(ii)

ammonia, ammonium hydroxide and salts of ammonium;

(iii)

the organic or inorganic compounds of sulphurous, sulphuric, nitric, nitrous, hydrochloric,

hydrofluoric, hydriodic, hydro sulphuric, hydrobromic, boric;

(iv)

cyanogens compounds, cyanide compounds, cyanate compounds;

(v)

phosphorous and its compounds other than oregano phosphorus insecticides.

(vi)

chlorine

(b)

hydrogen sulphide is evolved by the decomposition of metallic sulphides, or hydrogen

sulphide is used in the production of such sulphides;

(c)

bleaching powder is manufactured or chlorine gas is produced in chlor- alkali plants;

(d)

(i) gas tar or coal tar or bitumen or shale oil asphalt or any residue of such tar is distilled or

is used in any process of chemicals manufacture;

(ii) tar based synthetic colouring matters or their intermediates are produced;

(e)

nitric acid is used in the manufacture of nitro compounds;

(f)

explosives are produced with the use of nitro compounds;

(g)

aliphatic or aromatic compounds or their metallic and non-metallic derivatives or substituted

derivatives, such as chloroform, ethylene glycol, formaldehyde, benzyl chloride, phenol, methyl ethyl

keystone peroxide, cobalt carbonyl, tungsten carbide etc. Are manufactured or recovered.

Appendix `B’

Concerning Special Bathing Accommodation in pursuance of Para 4 of Part IV

1.

Nitro or amido processes

2.

All chrome processes

3.

Processes of distilling gas or coal tar or processes of chemical manufacture in which tar is

used

4.

Processes involving manufacture, manipulation, handling or recovery of cyanogens

compound, cyanide compound, cyanate compounds

5.

Processes involving manufacture of bleaching powder or production of chlorine gas in

chlor alkali plants

6.

Manufacture, manipulation or recovery of nickel and its compounds

7.

All processes involving the manufacture, manipulation or recovery of aliphatic or aromatic

compounds or their derivatives or substituted derivatives.

Appendix `C’

Ambulance should have the following equipment :

General :

•

An wheeled stretcher with folding and adjusting devices; Head of the stretcher must

be capable of being tilted upward;

•

Fixed suction unit with equipment;

•

Fixed oxygen supply with equipment;

•

Pillow with case;

298

DELHI GAZETTE : EXTRAORDINARY

PART IV]

•

Sheets;

•

Blankets;

•

Towels;

•

Emesis bag;

•

Bed pan;

•

Urinal;

•

Glass

Safety equipment :

•

Flares with life of 30 minutes

•

Flood lights;

•

Flash lights;

•

Fire extinguisher dry powder type;

•

Insulated gauntlets. Emergency care equipment :- Resuscitation :

•

Portable suction unit;

•

Portable oxygen unit;

•

Bag-valve-mask, hand operated artificial ventilation unit;

•

Airways;

•

Mouth gags;

•

Tracheostomy adapters;

•

Short spine board;

•

I.V. Fluids with administration unit;

•

B.P. manometer;

•

Cugg;

•

Stethoscope

Immobilization

•

Long & short padded boards;

•

Wire ladder splints;

•

Triangular bandage;

•

Long & short spine boards.

Dressings :

•

Gauze pads – 4‖ x 4‖ ;

•

Universal dressing 10‖ x 36‖ ;

•

Roll of aluminum foils;

•

Soft roller bandages 6‖ x 5 yards;

•

Adhesive tape in 3‖ roll;

•

Safety pins;

•

Bandage sheets;

•

Burn sheet.

Poisoning :

•

Syrup of Ipecac; } } Pre packeted in doses

•

Activated charcoal; }

•

Snake bite kit;

•

Drinking water.

Emergency Medicines:

•

As per requirement (under the advice of Medical Officer only)

[PART IV

DELHI GAZETTE : EXTRAORDINARY

299

SCHEDULE-XII

MANUFACTURE OF POTTERY

1 Definitions – For the purposes of this schedule –

(a)

―pottery‖ includes earthenware, stoneware, porcelain, China tiles, and any other articles

made from such clay or from a mixture containing clay and other materials such as quartz, flint,

feldspar, and gypsum;

(b)

―efficient exhaust draught‖ means localized ventilation effected by mechanical or other

means for removal of dust or fume so as to prevent it from escaping into air of any place in

which work is carried on. No draught shall be deemed efficient which fails to remove effectively

dust or fume generated at the point where dust or fume originates;

(c)

―fettling‖ includes scalloping, towing, sand papering, sand sticking, brushing or any other

process of cleaning of pottery ware in which dust is given off;

(d)

―leadless glaze‖ means a glaze which does not contain more than one per cent of its dry

weight, of a lead compound calculated as lead monoxide;

(e)

―low solubility glaze‖ means a glaze which does not yield to dilute hydrochloric acid more than

five per cent of its dry weight, of a soluble lead compound calculated as lead monoxide when

determined in the manner described below :

A weighed quantity of the material which has been dried at 100 degrees centigrade and

thoroughly mixed shall be continuously shaken for one hour at the common temperature with 1000

times its weight of an aqueous solution of hydrochloric acid containing 0.25 per cent by weight of

hydrogen chloride. This solution shall thereafter be allowed to stand for one hour and then filtered.

The lead salt contained in the clear filtrate shall then be precipitated as lead sulphide and weighed

as lead sulphide;

(f) ―ground or powdered flint or quartz‖ does not include natural sands; and

(g)

―potter‘s shop includes all places where pottery is formed by pressing or by any other

process and all places where shaping, fettling or other treatment of pottery articles prior to placing

for the biscuit fire is carried on.

2.

Efficient exhaust draught – (1) The following processes shall not be carried on without

the use of an efficient exhaust draught –

(a)

all processes involving the manipulation or use of a dry and un fritted lead compound;

(b)

the fettling operations of any kind, whether on green ware or biscuit, provided that this shall

not apply to the wet fettling, and to the occasional finishing of pottery articles without the aid of

mechanical power;

(c)

the shifting of clay dust or any other material for making tiles or other articles or other

300

DELHI GAZETTE : EXTRAORDINARY

PART IV]

articles by pressure, except where –

(i)

this is done in an machine so enclosed as to effectually prevent the escape of dust; or

(ii)

the material to be shifted is so damp that no dust can be given off;

(d)

the pressing of tiles from clay dust, an exhaust opening being connected with each press,

and pressing from clay dust of articles other than tiles, unless the material is so damp that no dust is

given off;

(e)

the fettling of tiles made from clay dust by pressure, except where the fettling is done

wholly on, or with, damp material, and fettling of other articles made from clay dust, unless the

material is so damp that no dust is given off;

(f)

the process of loading and unloading of saggars where handling and manipulation of

ground and powdered flint, quartz, alumina or other materials are involved;

(g)

the brushing of earthenware biscuit, unless the process is carried on in a room provided

with efficient general mechanical ventilation or other ventilation which is certified by the Inspector-

cum-Facilitator as adequate having regard to all the circumstances of the case;

(h)

fettling of biscuit ware which has been fired in powdered flint or quartz except where this

is done in machines so enclosed as to effectually prevent the escape of dust;

(i)

Ware cleaning after the application of glaze by dipping or other process;

(j)

crushing and dry grinding of materials for pottery bodies and saggars, unless carried on in

machines so enclosed as to effectively prevent the escape of dust or is so damp that no dust can be

given off;

(k)

sieving or manipulation of powdered flint, quartz, clay grog or mixture of these materials

unless it is so damp that no dust can be given off;

(l)

grinding of tiles on a power-driven wheel unless an efficient water spray is used on the

wheel;

(m)

lifting and conveying of materials by elevators and conveyors unless they are effectively

enclosed and so arranged as to prevent escape of dust into the air in or near to any place in which

persons are employed;

(n)

preparation or weighing out of flow material, lawning of dry colours, colour dusting and

colour blowing;

(o)

mold making unless the bins or similar receptacles used for holding plaster of Paris are

provided with suitable covers; and

(p)

manipulation of calcined material unless the material has been made and remains so wet

that no dust is given off.

(2)

(i) All equipment for the extraction or suppression of dust shall at least once in every six

months be examined and tested by competent person, and any defect disclosed by such

examination and test shall be rectified as soon as practicable.

[PART IV

DELHI GAZETTE : EXTRAORDINARY

301

(ii) A register containing particulars of such examination and test shall be kept in Form No. 26

3.

Carrying of process- Each of the following processes shall be carried on in such a

manner and under conditions so as to secure effectual separation from one another and from

another processes;

(a)

crushing and dry grinding or sieving of materials, fettling, pressing of tiles, drying of clay

and green ware, loading and unloading saggars

(b)

all processes involving use of dry lead compound

4 Use of glaze – No glaze which is not a leadless glaze or a low solubility glaze shall be used in

a factory in which pottery is manufactured.

5.

Prohibition relating to pregnant women and Adolescent - No pregnant woman or

adolescent shall be employed or permitted to work in any of the operations specified in clause 2

or at any place where such operations are carried on

6.

Potter’s wheel. – The potter‘s wheel (Jolly and Jigger) shall be provided with screens or

so constructed as to prevent clay scrapings being thrown off beyond the wheel.

7.

Measures to be taken to prevent dust flowing:-

(1)

All practical measures shall be taken by damping or otherwise to prevent dust arising

during cleaning of floors.

(2)

Damp saw-dust or other suitable material shall be used to render the moist method effective

in preventing dust rising into the air during the cleaning process which shall be carried out after work

has ceased.

8.

Cleaning of Floors :- The floors of potter‘s shops, slip houses, dipping houses and ware

cleaning rooms shall be hard, smooth and impervious and shall be thoroughly cleaned daily by an

adult male using a moist method.

9.

Medical examination by Medical officer –

(1)

Every worker employed in any process mentioned under paragraph 3, shall be examined by a

Medical officer within 15 days of his first employment. Such examination shall include tests for

lead in urine and blood, ALA in urine, hemoglobin content, stippling of cells and. No worker

shall be allowed to work after 15 days of his first employment in the factory unless certified fit for

such employment by the Medical officer.

(2)

All persons employed in any of the processes included under subparagraphs 3(a) and 3(n)

shall be examined by a Medical officer once in every 3 calendar months. Those employed in any

other processes mentioned in the remaining sub-paragraphs of paragraph 3 shall be examined by a

Medical officer one in every 12 calendar months. Such examinations in respect of all the workers

shall include all the tests as specified in sub-paragraph (1) except chest X-ray which will be once

in 3 years.

302

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(3)

The Medical officer after examining a worker, shall issue a Certificate of Fitness in Form-

24. The record of examination and re-examinations carried out shall be entered in the Certificate

and the Certificate shall be kept in the custody of the occupier of the factory. The record of each

examination carried out under sub-paragraphs (1) and (2), including the nature and the results of

the tests, shall also be entered by the Medical officer in a health register in Form-05.

(4)

The Certificate of Fitness and the health register shall be kept readily available for

inspection by the Inspector-cum-Facilitator. If at any time the Medical officer is of the opinion

that a worker is no longer fit for employment in the said process on the ground that continuance

there in would involve special danger to the health of the worker he shall make a record of his

findings in the said Certificate and the health register. The entry of his findings in these documents

should also include the period for which he considers that the said person is unfit for work in the

said processes. The person so suspended from the process shall be provided with alternate

placement facilities unless he fully is incapacitated in the opinion of the Medical officer, in which

case the person affected shall be suitably rehabilitated.

(5)

No person who has been found unfit to work as said in sub-paragraph (4) above shall be

re-employed or permitted to work in the said processes unless the Medical officer, after further

examination, again certifies him fit for employment in those processes.

10.

Protective equipment –

(1)

The occupier shall provide and maintain suitable overalls and hand coverings for all persons

employed in process included under paragraph 3.

(2)

The occupier shall provide and maintain suitable aprons of a of a waterproof or similar

material, which can be sponged daily, for the use of the dippers, dippers assistants, throwers,

jolly workers, casters, mold makers and filter press and pug mill workers.

(3)

Aprons provided in pursuance of paragraph 10(2) shall be thoroughly cleaned daily by the

wearers by sponging or other wet process. All overalls and head coverings shall be washed,

cleaned and mended at least once a week, and this washing, cleaning or mending shall be provided

for by the occupier.

(4)

No person shall be allowed to work in emptying sacks of dust materials, weighing out and

mixing of dusty materials and charging of ball mills and plungers without wearing a suitable and

efficient dust respirator.

11.

Washing facilities –

(1)

The occupier shall provide and maintain, in a clean state and in good repair for the use

of all persons employed in any of the processes specified in paragraph 3 –

(a)

a wash place under cover, with either –

(i)

a trough with a smooth impervious surface fitted with a waste pipe without plug, and of

sufficient length to allow of at least one feet for every five such persons employed at any one

time, and having a constant supply of clean water from taps or jets above the trough at intervals

[PART IV

DELHI GAZETTE : EXTRAORDINARY

303

of not more than two minutes; or

(ii)

at least one tap or stand pipe for every five such persons employed at any one time, and

having a constant supply of clean water, the tap or stand pipe being spaced not less than 1.20

meters apart; and

(b)

a sufficient supply of clean towels made of suitable materials changed daily, with a

sufficient supply of soap and nail brushes.

12.

Time allowed for washing – Before each meal and before the end of the day‘s work, at

least ten minutes, in addition to the regular meal times, shall be allowed for washing to each person

employed in any of the processes mentioned in paragraph 2.

13.

Mess room –

(1)

There shall be provided and maintained for use of all persons remaining within the

premises during the rest intervals, a suitable mess room providing accommodation of 0.93 square

meter per head and furnished with –

(a)

a sufficient number of tables and chairs or benches with back rest;

(b)

arrangements for washing utensils;

(c)

adequate means for warming food; and

(d)

adequate quantity of drinking water.

(2)

The room shall be adequately ventilated by the circulation of fresh air and placed under the

charge of a responsible person and shall be kept clean.

14.

Food, drinks, etc. Prohibited in workrooms – No food, drink, pan and supari or tobacco

shall be brought into, or consumed by any worker in any workroom in which any of the processes

mentioned in paragraph 3 are carried on and no person shall remain in any such room during

intervals for meals or rest.

15.

Cloakrooms etc. – There shall be provided and maintained for the use of all persons

employed in any of the processes mentioned in paragraph 2.

(a)

a cloakroom for clothing put off during working hours and such accommodation shall be

separate from any mess room; and

(b)

Separate and suitable arrangements for the storage of protective equipment provided under

paragraph 11

16.

Applications – These provisions shall not apply to a factory in which any of the following

articles, but no other pottery, are made :-

(a)

unglazed or salt glazed bricks and tiles; and

(b)

Architectural terra-cotta made from plastic clay and either unglazed or glazed with a

leadless glaze only.

304

DELHI GAZETTE : EXTRAORDINARY

PART IV]

17.

Exemption – If in respect of any factory the Chief Inspector-cum- Facilitator is satisfied

that all or any of the provisions of this schedule are not necessary for the protection of the persons

employed in such factory, he may by a certificate in writing exempt such factory from all or any of

such provisions, subject to such conditions as he may specify therein. Such certificate may at any

time be revoked by the Chief Inspector-cum-Facilitator without assigning any reasons.

SCHEDULE-XIII

COMPRESSION OF OXYGEN AND HYDROGEN PRODUCED BY ELECTROLYSIS

OF WATER

1.

Location of electrolyte plant – The room in which electrolysis plant is installed shall be

separate from the plant for storing and compressing the oxygen and hydrogen and also the electric

generator room.

2.

Testing of purity – (1)The purity of oxygen and hydrogen shall tested by a competent

person at least once in every shift at the following posts:-

(a)

in the electrolysis room;

(b)

at the gas holder inlet; and

(c)

at the suction and of the compressor.

(2) The purity figures shall be entered in a register and signed by the persons carrying out such

test:

Provided, however, that if the electrolysis plant is fitted with automatic recorder of purity of

oxygen and hydrogen with alarm lights, it shall be sufficient if the purity of gases is tested at the

suction and of the compressor only.

3.

Restriction as to the compression – The oxygen and hydrogen gases shall not be

compressed if their purity as determined under paragraph 2 above falls below 98%at any time.

4.

Provision of negative pressure switch – In addition to the limit switch in the gasholder, a

sensitive negative pressure switch shall be provided in or adjacent to the suction main for

hydrogen close to the gas holder and between the gas holder and the hydrogen compressor to

switch off the compressor motor in the event of the gas holder being emptied to the extent as to

cause vacuum.

5.

Switch for gas holder – The bell of any gas holder shall not be permitted to go within

the 30 centimeters of its lowest position when empty and a limit switch shall be fitted to the gas

holder in such a manner as to switch off the compressor motor when the limit is reached.

6.

Purity of caustic soda – The water, caustic soda and caustic potash used for making lye

shall be of standards suitable for electrolysis.

7.

Precautions against reversal of polarity – Electrical connections at the electrolyze cells

and at the electric generator terminals shall be so constructed as to preclude the possibility of

[PART IV

DELHI GAZETTE : EXTRAORDINARY

305

wrong connections leading to the reversal of polarity and in addition an automatic device shall be

provided to cut off power in the event of reversal of polarity owing to wrong connections either at

the switch board or at the electric generator terminals.

8.

Colouring of gas pipes – Oxygen and hydrogen gas pipes shall be painted with

distinguishing colours. Whenever an Hydrogen pipe is opened for repair or any other work, on

reconnection the pipe shall be purged of all air before hydrogen is allowed to pass through that

pipe.

9.

Use of flame proof fittings – All electrical wiring and apparatus in the electrolyser room

shall be of flameproof construction or enclosed in flameproof fittings and no naked light or flame

shall be allowed to be taken either in the electrolyser room or where compression and filling of

the gases is carried on and such warning notices shall be exhibited in prominent places.

10.

Prohibition of hot work – No part of the electrolyser plant and the gas holders and

compressor shall be subjected to welding, brazing, soldering or cutting until steps have been

taken to remove any explosive substance from that part and render the part safe for such

operations and after the completion of such operations no explosive substance shall be allowed to

enter that part until the metal has cooled sufficiently to prevent risk of explosion.

11.

Repair, etc. to be done under supervision – No work or operations, repair or

maintenance shall be undertaken except under the direct supervision of a person who, by his

training, experience and knowledge of the necessary precautions against risk of explosion is

competent to supervise such work. No electric generator after erection or repairs shall be

switched on/the electrolysers unless the same is certified by the competent persons under whose

direct supervision erection or repairs are carried on to be in a safe condition and the terminals

have been checked for the polarity as required by paragraph 7.

12.

Checking of plant – Every part of the electrolysis plant and the gas holders and

compressor shall have a regular schedule of overhaul and checking and every defect noticed shall be

rectified forthwith.

SCHEDULE – XIV

MANIPULATION OF STONE OR ANY OTHER MATERIAL CONTAINING FREE

SILICA

1.

Application – This schedule shall apply to all factories or parts of factories in which

manipulation of stone or any other material containing free silica is carried on.

2.

Definitions- For the purpose of this Schedule –

(a)

―manipulation‖ means crushing, breaking, chipping, dressing, grinding, sieving, mixing, grading

or handling of stone or any other material containing free silica or any other operation involving such

stone or material;

306

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(b)

―Stone or any other material containing free silica‖ means a stone or any other solid

material containing not less than 5% by weight of free silica.

3.

Precautions in manipulation- No manipulation shall be carried out in a factory or part of

a factory unless one or more of the following measures, namely

(a)

damping the stone or other material being processed,

(b)

providing water spray,

(c)

enclosing the process,

(d)

isolating the process, and

(e)

providing localized exhaust ventilation are adopted so as to effectively control the dust in

any place in the factory where any person is employed, at a level equal to or below the maximum

permissible level for silica dust as laid down in Table 2 appended to Rule-131

Provided that such measures as above said are not necessary if the process or operation itself

is such that the level of dust created and prevailing does not exceed the permissible level referred

to above.

4.

Maintenance of floors-

(1)

All floors or places where fine dust is likely to settle on and whereon any person has to

work or pass shall be of impervious material and maintained in such condition that they can be

thoroughly cleaned by a moist method or any other method which would prevent dust being

airborne in the process of cleaning.

(2)

The surface of every floor of every work room or place where any work is carried on or

where any person has to pass during the course of his work, shall be cleansed of dust once at least

during each shift after being sprayed with water or by any other suitable method so as to prevent

dust being airborne in the process of cleaning.

5.

Prohibition relating Adolescent - No adolescent shall be employed or permitted to work

in any of the operations involving manipulation or at any place where such operations are carried

out.

6.

Medical examination by Medical officer –

(1)

Every worker employed in the processes specified in paragraph 1, shall be examined by a

Medical officer within 15 days of his first employment. Such medical examination shall include

tests for lead in urine and blood. ALA in urine, hemoglobin content, stippling of cells and

steadiness test. No worker shall be allowed to work after15 days of his first employment in the

factory unless certified fit for such employment by the Medical officer.

(2)

Every worker employed in the said processes shall be re-examined by a Medical officer

at least once in every twelve months. Such re-examination shall, wherever the Medical officer

considers appropriate, include all the tests as specified in subparagraph(1) except chest X-ray

which will be once in 3 years.

[PART IV

DELHI GAZETTE : EXTRAORDINARY

307

(3)

The Medical officer after examining a worker shall issue a Certificate of Fitness in Form-

24. The record of examination and re-examinations carried out shall be entered in the Certificate

and the Certificate shall be kept in the custody of the occupier of the factory. The record of each

examination carried out under sub-paragraphs (1) and (2), including the nature and the results of the

tests, shall also be entered by the Medical officer in a health register in Form- 25.

(4)

The Certificate of Fitness and the health register shall be kept readily available for

inspection by the Inspector-cum-Facilitator.

(5)

If at any time the Medical officer is of the opinion that a worker is no longer fit for

employment in the said process on the ground that continuance therein would involve special

danger to the health of the worker he shall make a record of his findings in the said Certificate and

the health register. The entry of his findings in these documents should also include the period for

which he considers that the said person is unfit for work in the said processes. The person so

suspended from the process shall be provided with alternate placement facilities unless he fully is

incapacitated in the opinion of the Medical officer, in which case the person affected shall be

suitably rehabilitated.

(6)

No person who has been found unfit to work as said in sub-paragraph (5) above shall be

re-employed or permitted to work in the said processes unless the Medical officer, after further

examination, again certifies him fit for employment in those processes.

7. Exemptions – If in respect of any factory, the Chief Inspector-cum- Facilitator is satisfied that

owing to the exceptional circumstances or in frequency of the processes or for any other reason, all

or any of the provisions of this schedule is not necessary for protection of the workers in the

factory, the Chief Inspector-cum-Facilitator may by a certificate in writing, which he may in his

discretion revoke at any time, exempt such factory from all or any of such provisions subject to

such conditions, if any, as he may specify therein.

SCHEDULE – XV

HANDLING AND PROCESSING OF ASBESTOS, MANUFACTURE OF ANY

ARTICLE OF ASBESTOS AND ANY OTHER PROCESS OF MANUFACTURE OR

OTHERWISE IN WHICH ASBESTOS IS USED IN ANY FORM.

1.

Application – This schedule shall apply to all factories or parts of factories in which any of

the following processes is carried on :-

(a)

breaking, crushing, disintegrating, opening, grinding, mixing or sieving of asbestos and any

other processes involving handling and manipulation of asbestos incidental thereto;

(b)

all processes in the manufacture of asbestos textiles including preparatory and finishing

processes;

308

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(c)

making of insulation slabs or sections, composed wholly or partly of asbestos, and processes

incidental thereto;

(d)

making or repairing of insulating mattresses, composed wholly or partly of asbestos, and

processes incidental thereto;

(e)

manufacture of asbestos cardboard and paper;

(f)

manufacture of asbestos cement goods;

(g)

application of asbestos by spray method;

(h)

sawing, grinding, turning, abrading and polishing in dry state of articles composed

wholly or partly of asbestos;

(i)

cleaning of any room, vessel, chamber, fixture or appliance for the collection of asbestos

dust; and

(j)

Any other processes in which asbestos dust is given off into the work environment.

2.

Definition – For the purpose of this Schedule –

(a)

―asbestos‖ means any fibrous silicate mineral and any admixture containing actinolite,

amosite, anthophyllite, chrysotile, crocidolite, tremolite or any mixture thereof, whether crude,

crushed or opened;

(b)

―asbestos textiles‖ means yarn or cloth composed of asbestos or asbestos

mixed with any other material;

(c)

―approved‖ means approved for the time being in writing by the Chief Inspector-cum-

Facilitator;

(d)

―breathing apparatus‖ means a helmet or face piece with necessary connection by means

of which a person using it breathes air free from dust, or any other approved apparatus;

(e)

―Efficient exhaust draught‖ means a localized ventilation by mechanical means for the

removal of dust so as to prevent dust from escaping into air of any place in which work is carried

on. No draught shall be deemed to be efficient which fails to control dust produced at the point

where such dust originates;

(f)

―preparing‖ means crushing, disintegrating, and any other processes in or incidental to the

opening of asbestos;

(g)

―Protective clothing‖ means overalls and head covering, which (in either case) will when

worn exclude asbestos dust.

3.

Tools and equipment – Any tools or equipment used in processes to which this schedule

applies shall be such that they do not create asbestos dust above the permissible limit or are

equipped with efficient exhaust draught.

4.

Exhaust draught –

(1)

An efficient exhaust draught shall be provided and maintained to control dust from the

[PART IV

DELHI GAZETTE : EXTRAORDINARY

309

following processes and machines:

(a)

manufacture and conveying machinery namely –

(i)

preparing, grinding, or dry mixing machines;

(ii)

carding, card waste and ring spinning machines, and looms;

(iii)

machines or other plant fed with asbestos;

(iv)

machines used for the sawing, grinding, turning, drilling, abrading or polishing; in the dry state,

of articles composed wholly or partly of asbestos;

(b)

cleaning, and grinding of the cylinders or other parts of a carding machine;

(c)

chambers, hoppers or other structures into which loose asbestos is delivered or passes;

(d)

work-benches for asbestos waste sorting or for other manipulation or asbestos by hand;

(e)

workplaces at which the filling or emptying of sacks, skips or other portable containers,

weighing or other process incidental thereto which is affected by hand, is carried on;

(f)

sack cleaning machines;

(g)

mixing and blending of asbestos by hand; and

(h)

any other process in which dust is given off into the work environment.

(2)

Exhaust ventilation equipment provided in accordance with sub-paragraph

(1) shall, while any work of maintenance or repair to the machinery, apparatus or other plant or

equipment in connection with which it is provided is being carried on, be kept in use so as to

produce an exhaust draught which prevents the entry of asbestos dust into the air of any work

place.

(3)

Arrangements shall be made to prevent asbestos dust discharged from exhaust apparatus

being drawn into the air of any workroom.

(4)

The asbestos bearing dust removed from any workroom by the exhaust system shall be

collected in suitable receptacles or filter bags which shall be isolated from all work areas.

5.

Testing and examination of ventilating systems –

(1)

All ventilating systems used for the purpose of extracting or suppressing dust as required

by this schedule shall be examined and inspected once every week by responsible person. It shall

be thoroughly examined and tested by a competent person once in every period of 12 months.

Any defects found by such examinations or test shall be rectified forthwith.

(2)A register containing particulars of such examination and test shall be kept in Form No. 26

6.

Segregation in case of certain process – Mixing or blending of asbestos by the hand, or

making or repairing of insulating mattresses composed wholly or partly of asbestos shall not be

carried on in any room in which any other work is done.

7.

Storage and distribution of loose asbestos –

310

DELHI GAZETTE : EXTRAORDINARY

PART IV]

All loose asbestos shall while not in use be kept in suitable closed receptacles

which prevent the escape of asbestos dust therefrom and such asbestos shall not be distributed in

the factory except in such receptacles or in totally enclosed system of conveyance.

8.

Asbestos sacks

(1)

All sacks used as receptacles for the purpose of transport of asbestos within the factory

shall be constructed of impermeable materials and shall be kept in good repair.

(2)

A sack which has contained asbestos shall not be cleaned by hand beating but by a

machine, complying with paragraph 4.

9.

Maintenance of floors and workplaces –

(1)

In every room in which any of the requirements of this schedule apply –

(a)

the floors, work-benches, machinery and plant shall be kept in a clean state and free from

asbestos debris and suitable arrangements shall be made for the storage of asbestos not

immediately required for use; and

(b)

the floors shall be kept free from any materials, plant or other articles not immediately

required for the work carried on in the room, which would construct the proper cleaning of the floor.

(2)

The cleaning as mentioned in sub-rule (1) shall so for as is practicable, as carried out by

means of vacuum cleaning equipment so designed and constructed and so used that asbestos dust

neither escapes nor is discharged into the air of any work place.

(3)

When the cleaning is done by any method other than that mentioned in subparagraph.

(2), the persons doing cleaning work and any other person employed in that room shall be

provided with respiratory protective equipment and protective clothing.

(4)

The vacuum cleaning equipment used in accordance with provisions of subparagraph(2),

shall be properly maintained and after each cleaning operation, its surfaces kept in a clean state and

free from asbestos waste and dust.

(5)

Asbestos waste shall not be permitted to remain on the floors or other surfaces at the work

place at the end of the working shift and shall be transferred without delay to suitable receptacles.

Any spillage of asbestos waste occurring during the course of the work at any time shall be

removed and transferred to the receptacles maintained for the purpose without delay.

10.

Breathing apparatus and protective clothing –

(1)

An approved breathing apparatus and protective clothing shall be provided and maintained

in good conditions for use of every person employed –

(a)

in chambers containing loose asbestos;

(b)

in cleaning, dust settling or filtering chambers of apparatus;

(c)

in cleaning the cylinders, including the defer cylinders, or other parts of a carding machine

by means of hand-strikes;

[PART IV

DELHI GAZETTE : EXTRAORDINARY

311

(d)

in filling, beating , or levelling in the manufacture or repair of insulating mattresses; and

(e)

in any other operation or circumstances in which it is impracticable to adopt technical

means to control asbestos dust in the work environment within the permissible limit.

(2)

Suitable accommodation in conveniently accessible position shall be provided for the use of

persons when putting on or taking off breathing apparatus and protective clothing provided in

accordance with this rule and for the storage of such apparatus and clothing when not in use.

(3)

All breathing apparatus and protective clothing washing not in use shall be stored in the

accommodation provided in accordance with sub-rule (2) above.

(4)

All protective clothing in use shall be de-dusted under an efficient exhaust draught or by

vacuum cleaning and shall be washed at suitable intervals. The cleaning schedule and procedure

should be such as to ensure the efficiency in protective the wearer.

(5)

All breathing apparatus shall be cleaned and disinfected at suitable intervals and thoroughly

inspected once every month by a responsible person.

(6)

A record of the cleaning and maintenance and of the condition of the breathing apparatus

shall be maintained in a register provided for that purpose which shall be readily available for

inspection by an Inspector-cum-Facilitator.

(7)

No person shall be employed to perform any work specified in sub-paragraph

(1) for which breathing apparatus is necessary to be provided under that sub- paragraph unless he

has been fully instructed in the proper use of that equipment.

(8) No breathing apparatus provided in pursuance of sub-paragraph (1) which has been worn by a

person shall be worn by another person unless it has been thoroughly cleaned and disinfected

since last being worn and the person has been fully instructed in the proper use of that equipment.

11.

Separate accommodation for personal clothing – A separate accommodation shall

be provided in a conveniently accessible position for all persons employed in operation to which

this schedule applies for storing of personal clothing. This should be separated from the

accommodation provided under sub-paragraph (2) of paragraph 10 to prevent contamination of

personal clothing.

12.

Washing and bathing facilities –

(1)

There shall be provided and maintained in a clean state and in good repair for the use of all

workers employed in the processes covered by the schedule, adequate washing and bathing places

having a constant supply of water under cover at the rate of one such place for every 15 persons

employed. The washing places shall have standpipes place at intervals of not less than one meter.

(2)

Not less than one half of the total number of washing places shall be provided with

bathrooms.

312

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(3)

Sufficient supply of clean towels made of suitable material shall be provided:

Provided that such towels shall be supplied individually for each worker if so ordered by the

Inspector-cum-Facilitator.

(4)

Sufficient supply of soap and nail brushes shall be provided.

13.

Mess room –

(1)

There shall be provided and maintained for the use of all worker employed in the factory

covered by this schedule, remaining on the premises during the rest intervals, a suitable mess room

which shall be furnished with:-

(a)

sufficient tables and benches with back rest, and

(b)

adequate means for warming food.

(2)

The mess room shall be placed under the charge of a responsible person and shall be kept

clean.

14.

Prohibition of employment of Adolescent – No adolescent shall be employed in any of

the process covered by this schedule.

15.

Prohibition relating to smoking – No person shall smoke in any area where processes

covered by this schedule are carried on. A notice in the language understood by majority of the

workers shall be posted in the plant prohibiting smoking at such areas.

16.

Cautionary notices –

(1)

Cautionary notices shall be displayed at the approaches and along the perimeter of every

asbestos processing area to warn all persons regarding –

(a)

hazards to health from asbestos dust,

(b)

need to use appropriate protective equipment,

(c)

Prohibition of entry to unauthorized persons, or authorized persons but without protective

equipment.

(2)

Such notices shall be in the language understood by the majority of the workers.

17.

Air monitoring – To ensure the effectiveness of the control measures, monitoring of

asbestos fibre in air shall be carried out once at least in every shift and the record of the results so

obtained shall be entered in a register specially maintained for the purpose.

18.

Medical examination by Medical officer –

(1)

Every worker employed in the processes specified in paragraph 1 shall be examined by a

Medical officer within 15 days of his first employment. Such examination shall include

pulmonary function test, tests for detecting asbestos fibers in sputum and chest X-ray. No worker

shall be allowed to work after 15 days of his first employment in the factory unless certified fit for

such employment by the Medical officer.

[PART IV

DELHI GAZETTE : EXTRAORDINARY

313

(2)

Every worker employed in the process referred to sub-paragraph (1) shall be re-examined

by a Medical officer at least once in every twelve calendar months. Such examination shall,

wherever the Medical officer considers appropriate, include all the tests specified in sub-

paragraph (1) except chest X-ray which will be carried out once in 3 years.

(3)

The Medical officer after examining a worker shall issue a Certificate of Fitness in Form-

24. The record of examination and re-examinations carried out shall be entered in the certificate

and the certificate shall be kept in the custody of the occupier of the factory. The record of each

examination carried out under sub-paragraphs (1) and (2), including the nature and the results of the

tests, shall also be entered by the Medical officer in a health register in Form-05.

(4)

The certificate of Fitness and the health register shall be kept readily available for inspection by

the Inspector-cum-Facilitator.

(5)

If at any time the Medical officer is of the opinion that a worker is no longer fit for

employment in the said processes on the ground that continuance therein would involve special

danger to the health of the worker, he shall make a record of his findings in the said certificate and

the health register. The entry of his findings in those documents should also include the period for

which he considers that the said person is unfit to work in the said processes. The person so

suspended from the process shall be provided with alternate placement facilities unless he is fully

incapacitated in the opinion of the Medical officer, in which case the person affected shall be

suitably rehabilitated.

(6)

No person who has been found unfit to work as said in sub-paragraph (5) shall be re-

employed or permitted to work in the said processes unless the Medical officer, after future

examination, again certifies him fit for employment in these processes.

20. Exemptions – If in respect of any factory, the Chief Inspector-cum- Facilitator is satisfied

that owing to the exceptional circumstances or infrequency of the processes or for any other reason,

all or any of the provisions of this schedule is not necessary for protection of the workers in the

factory, the Chief Inspector-cum-Facilitator may by a certificate in writing, which he may at his

discretion revoke at any time, exempt such factory from all or any of such provisions subject to

such conditions, if any, as he may specify therein.

SCHEDULE – XVI

HANDLING OR MANIPULATION OF CORROSIVE SUBSTANCE

1.

Definitions – For the purposes of this schedule –

(a)

―corrosive operation‖ means an operation of manufacturing, storing, handling processing,

packing, or using any corrosive substance in a factory; and

(b)

―corrosive substance‖ includes sulphuric acid, nitric acid, hydrochloric acid,

314

DELHI GAZETTE : EXTRAORDINARY

PART IV]

hydrofluoric acid, carbolic acid, phosphoric acid, liquid chlorine, liquid bromine, ammonia, sodium

hydroxide and potassium hydroxide and a mixture thereof, and any other substance which the

Government by notification in the Official Gazette specify to be corrosive substance.

2.

Flooring – The floor of every workroom of a factory in which corrosive operation is

carried on shall be made of impervious, corrosion and fire resistance material and shall be so

constructed as to prevent collection of any corrosive substance. The surface of such flooring shall

be smooth and cleaned as often as necessary and maintained in a sound condition.

3.

Protective equipment- (a) the occupier shall provide for the use of all persons employed

in any corrosive operation suitable protective wear for hands and feet, suitable aprons, face shields,

chemical safety goggles, and respirators. The equipment shall be maintained in good order and shall

be kept in clean and hygienic condition by suitably treating to get rid of the ill effects of any absorbed

chemicals and by disinfecting. The occupier shall also provide suitable protective creams and other

preparations wherever necessary.

(b) The Protective equipment and preparations provided shall be used by the persons employed in

any corrosive operation.

4.

Water facilities – Where any corrosive operation is carried on, there shall be provided as

close to the place of such operation as possible, a source of clean water at a height of 210

centimetres from a pipe of 1.25 centimetres diameter and fitted with a quick acting valve so that

in case of injury to the worker by any corrosive substance, the injured part can be thoroughly

flooded with water. Whenever necessary, in order to ensure continuous water supply, a storage tank

having a minimum length, breadth and height of 210 centimetres, 120 centimetres and 60

centimetres respectively or such dimensions as are approved by the Chief Inspector-cum-

Facilitator shall provide as the source of clean water.

5.

Cautionary notice – A cautionary notice in the following form and printed in the language

which majority of the workers employed understand, shall be displayed prominently close to the

place where a corrosive operation is carried out and where any of the operation mentioned in clause

2 above is carried out and where it can be easily and conveniently read by the workers. If any worker

is illiterate, effective steps shall be taken to explain carefully to him the contents of the notice so

displayed.

CAUTIONARY NOTICE DANGER

Corrosive substances cause severe burns and vapours thereof may be extremely hazardous. In case of

contact, immediately flood the part affected with plenty of water for at least 15 minutes.

Get medical attention quickly.

6.

Transport – (1) Corrosive substances shall not be filled, moved or carried except in

containers or through pipes and when they are to be transported in containers, they shall be p laced

in crates of sound construction and of sufficient strength.

(2)

A container with a capacity of 11.5 liters or more of a corrosive substance shall be placed

in a receptacle or crate and then carried by more than one person at a height below the waist line

[PART IV

DELHI GAZETTE : EXTRAORDINARY

315

unless a suitable rubber wheeled truck is used for the purpose.

(3)

Containers for corrosive substances shall be plainly labelled.

7.

Devices for handling corrosive – (1) Tilting, lifting of pumping arrangements shall be

used for emptying jars, carboys and other containers of corrosives.

(2) Corrosive substance shall not be handled by bare hands but by means of a suitable scoop or

other device.

8.

Opening of valves – Valves fitted to containers holding a corrosive substance shall be

opened with great care. If they do not work freely, they shall not be forced open. They shall be

opened by a worker suitably trained for the purpose.

9.

Cleaning tanks, stills, etc. – (1) In cleaning out or removing residues from stills or other

large chambers used for holding any corrosive substance, suitable implements made of wood or

other material shall be used to prevent production of arseniuretted hydrogen (arsine).

(2)

Whenever it is necessary for the purpose of cleaning or other maintenance work for any

worker to enter chamber, tank, vat, pit or other confined space where a corrosive substance had

been stored, all possible precautions required under rules framed under Schedule II of the Code

shall be taken to ensure the worker‘s safety.

(3)

Wherever possible, before repairs are undertaken to any part of equipment in which a

corrosive substance was handled, such equipment or part thereof shall be freed of any adhering

corrosive substance by adopting suitable methods.

10.

Storage – (1) Corrosive substances shall not be stored in the same room with other

chemicals, such as turpentine, carbides, metallic powders and combustible materials, the

accidental mixing with which may cause a reaction which is either violent or gives rise to toxic

fumes and gases.

(2)

Pumping or filling overhead tanks, receptacles, vats or other containers for storing corrosive

substances shall be so arranged that there is no possibility of any corrosive substance overflowing

and causing injury to any person.

(3)

Every container having a capacity of twenty liters or more and every pipeline, valve, and

fitting used for storing or carrying corrosive substances shall be thoroughly examined every year

for finding out any defects, and defects so found out shall be removed forthwith. A register shall be

maintained of every such examination made and shall be produced before the Inspector- cum-

Facilitator whenever required.

11.

Fire extinguishers and firefighting equipment – An adequate number of suitable types

of fire extinguishers or other stored, shall be provided. Such extinguishers or other equipment

shall be regularly tested and refilled. Clear instructions as to how the extinguishers or other

equipment should be used, printed in the language which majority of the workers employed

316

DELHI GAZETTE : EXTRAORDINARY

PART IV]

understand, shall be affixed near each extinguisher or other equipment.

12.

Exemption – If in respect of any factory on application made by the manager, the Chief

Inspector-cum-Facilitator is satisfied that owing to the exceptional circumstances, or the

infrequency of the process or for any other reason to be recorded by him in writing, all or any of

the provisions of this schedule are not necessary for the protection of the persons employed

therein, he may by a certificate in writing, which he may at any time revoke, exempt the factory

from such of the provisions and subject to such conditions as he may specify therein.

SCHEDULE – XVII

USE OF OVENS AND DRIERS IN FACTORIES

1.

Application- this schedule shall apply to ovens and driers, except those used in

laboratories and kitchens of any establishment and those which have a capacity below 325 liters.

2.

Definitions- for the purpose of this schedule, oven or drier means any enclosed structure,

receptacle, compartment or box which is used for baking, drying or otherwise processing of any

article or substance at a temperature higher than that ambient temperature of air in the room of

space in which the oven or drier is situated, and in which the flammable or explosive mixture of air

and flammable substance is likely to be evolved with the enclosed structure, receptacle,

compartment or box or part thereof on account of article or substance which is baked or dried or

otherwise processed within it.

3.

Separate electric connection- Electric power supplied to every oven or drier shall be by

means of separate circuit provided with an isolated switch.

4.

Design, construction, examination and testing- (1) every oven or drier shall be

properly designed on sound engineering practice and be of good construction, sound materials and

adequate strength free from any patent defect and safe, if properly used.

(2)

no oven or drier shall be taken into use in factory for the first time unless a competent

person has thoroughly examined all its parts carried out the tests as are required to establish that the

necessary safe systems and control provided for safety in operation for the processes for which it

is to be used and a certificate of such examination and tests signed by that competent person has

been obtained and are kept available for inspection.

(3)

all parts of an oven or drier has undergone any alteration or repair which has the effect of

modifying any of the design characteristics, shall not be used unless a thorough examination and

tests as have been mentioned in clause (b) have been carried by the competent person and a

certificate of such examination and tests signed by that competent person has been obtained and

are kept available for inspection.

5.

Safety, Ventilation- (1) every oven or drier shall be provided with a positive and effective

safety ventilation system using one or more motor driven centrifugal fans so as to dilute any

mixture of air and flammable substance that may be formed within the oven or drier and maintain

the concentration of the flammable substance in the air at safe level of dilution.

[PART IV

DELHI GAZETTE : EXTRAORDINARY

317

(2)

The safe level of dilution referred to in clause (a) shall be so as to achieve a concentration

of concerned flammable material in air of not more than 25 % of its lower explosive limit;

Provided that level of concentration in the air up to 50% of the lower explosive limit of the

concerned flammable substance may be permitted to exist subject to installation and maintenance

of an automatic device which:-

(a)

Shows continuously the concentration of the flammable substance in air present in the

oven or drier at any instant;

(b)

Sounds an alarm when the concentration of the flammable substance in air presenting any

part of oven or drier reaches a level of 50% of explosive limit

(c)

Shuts down the heating system of the oven or drier automatically when the concentration of

the flammable substance in air present in any part of oven or drier reaches a level of 60% of lower

explosive limit, is provided to the oven or drier and maintained in the efficient working condition.

(d)

No oven or drier shall be operated without its safety ventilation system working

inefficient manner.

(e)

no oven or drier shall be operated with a level of dilution less than what is referred in

clause (b)

(f)

exhaust ducts of safety ventilation system should be so designed and placed that their ducts

discharge the mixture of air and flammable substance away from the workroom and not near

windows or doors or other openings from where the mixture could re-enter the work room.

(g)

The fresh air admitted into the oven or drier by means of safety ventilation system shall be

circulated adequately by means of circulating fans or fans through all parts of the oven or drier so

as to ensure that there is no location where the flammable substance can accumulate in the air

become pocketed to any dangerous degree.

(h)

Throttling dampers in any safety ventilation system should be so designed by cutting away

the portion of damper or otherwise that system will handle at least the minimum ventilation rate

required for safety when they are set in their maximum throttling position.

6.

Explosion panels – (1) every oven or drier having an internal total space of not less than

half cubic meter shall be provided with suitably design explosion panel so as to allow the release of

the pressure of any possible explosion within the oven or drier through explosions vents. The area

of opening of any access doors which are provided with suitable arrangements for their release in

case of an explosion shall not be less than2200 sq cm for every 1 cu m of the volume of the oven or

drier. The design of the explosion panel and doors as stated above shall be such as to secure their

complete release under an internal pressure of 0.25 kg/sq cm.

(2) The explosion releasing panel shall, as far as practicable, be situated on the roof of the oven or

drier or at those portions of the walls where persons don‘t remain in connection with operation of

oven or drier.

318

DELHI GAZETTE : EXTRAORDINARY

PART IV]

7.

Inter locking arrangement – In each oven or drier efficient inter locking arrangement

shall be provided and maintain to insure that

(a)

All ventilating fans and circulating fans whose failure would adversely affect the

ventilation rate of flow pattern, are in operation before any mechanical conveyor that may be

provided for feeding the article or substances to be processed in the oven or drier, input into

operation

(b)

Failure of any the ventilating or circulating fans will automatically stop any conveyor as

referred to in clause (a) as may be provided as well as so the fume supply by closing the shut of

valve and shut off the ignition in the case of gas or oil-fired ovens and in case of electrically heated

oven switch off the electrical supply to the heater

(c)

The afore said mechanical conveyor is set in operation before the said shut off valve can be

energies

(d)

The failure of the aforesaid conveyor will automatically closed the said shut off valve in

the case of oven and drier heated by gas , oil or steam and deactivate the ignition system or cut

off the electrical heater in the case of electrically heated ovens are furnaces

8.

Automatic ventilation; - Every oven or drier heated by oil, gas, steam or electricity shall

be provided with an efficient arrangement for automatic ventilation consisting of at least three

volume changes with fresh air by operation of safety ventilation fans and circulating fans so as to

effect purging of the oven or drier of any mixture of air and flammable substance before the

heating system can be activated and before the conveyor can be placed in position.

9.

Temperature control – Every oven or drier shall be provided with an automatic

arrangement to ensure that the temperature which does not exceed a maximum temperature

required in respect of the particular process is being carried out

10.

Multi stage processes – Whatever material are to be processed in ovens or driers in

successive operation suitable arrangements should be provided to ensure that the operating

temperature necessary for safe operation at each stage are maintain within the design limit

11.

Combustible substances not to drip on electrical heater or burner flame –

Effecting arrangement shall be provided in every oven or drier to prevent dripping of

combustible substances on electrical heater or burner flame used for heating.

12.

Periodical examination, testing and maintenance – (a) All parts of every oven or drier

shall be properly maintain and thoroughly examined and the various control as mentioned in the

schedule and the working of the oven or drier shall be tested at frequent interval to ensure its safe

operation by a responsible person authorized by the occupier or manager in this behalf who by his

experience and knowledge of necessary precaution against risk of explosion, is fit to undertake

such work

13.

- Training of operator – No person shall be assigned any task connected with operation of

any oven or drier unless his has completed 18 yrs of a and is properly trained

[PART IV

DELHI GAZETTE : EXTRAORDINARY

319

14.

Polymerizing machine – (a) Printed fabric shall be thoroughly dried by passing them

over drying canes or through hot flue or other equally effecting means before the same is allowed

to pass through polymerizing machines

(c)

Infra ray heater of polymerizing machines shall be cut off while running the print.

SCHEDULE – XVIII

MANUFACTURE OR MANIPULATION OF CARCINOGENIC DYE

INTERMEDIATES

1.

Application – The schedule shall apply in respect of all factories or any part thereof where

processes in which the process of manufacturing or manipulation of a carcinogenic Dye

Intermediates (here in referred to as the said manufacturing processes) is carried on.

Provided that Paragraphs 25 and 26 shall only to a process involving manufacturing,

manipulation of compounds mentioned in Appendix B ( here in referred to as the said

manufacturing processes B)

PART-I

2.

Definition – (a) For the purpose of this schedule a nitro or amino compounds means a

nitrated or aminated compound of aromatic hydrocarbons mentioned in Appendix A or B attached

there to.

(b)

―Approved ―means approved by Chief Inspector-cum-Facilitator.

(c)

―efficient exhaust draught‖ means localized ventilation effected by mechanical means for

the removal of gas, Vapour, dust or fume so as to prevent them from escaping into the air of any

place in which work is carried on. No draught, shall be deemed to be efficient which fails to remove

smoke generated at the point where such gas, Vapour, fume or dust originates; and

(d)

Manipulation shall include mixing, blending, filling, emptying, grinding, sieving, drying,

packing, sweeping, handling, using or chemical processing of a nitro- amino compound.

(e)

―Airline respirator‖ means a helmet or face piece with necessary connections by means of

which a person using it in a poisonous or irritant atmosphere breathes ordinary air or any suitable

apparatus approved in writing by Chief Inspector-cum-Facilitator.

3.

Cautionary placards – Cautionary placards in the form specified in appendix attached to this

schedule and printed in the language of the majority of the workers employed in the said

processes shall be affixed in prominent places frequented by them in the factory, where the

placards can be conveniently read. Arrangements shall be made by the manager to instruct

periodically all such workers regarding the precautions contained in the cautionary placards.

320

DELHI GAZETTE : EXTRAORDINARY

PART IV]

4.

Prohibition relating to employment of pregnant women and Adolescent – No

pregnant woman or adolescent shall be employed or permitted to work in any room in which the

said processes are carried on.

5.

Air space- in every room in which the said manufacturing process is carried on there shall at

least 15 cubic-meters of air space excluding any space occupied by machinery equipment or any

other article for each person employed there in and in computing this air space no height over 4.25

meters shall be taken into account.

6.

Efficient exhaught draught- unless the said process is completely enclosed so as to not to

give rise to dust or fume it shall not be carried on without the use of an efficient exhaught draught

when a nitro amino compound;

(a)

Is introduced into a tank, hopper, machine, or container or filled into cartridge; or

(b)

Is ground, crushed, mixed, sieved, or blended.

7.

Floors of workroom – The floor of every workroom in which the said processes are

carried on shall be

(a)

Smooth and impervious to water provided that asphalt or tar shall not be used in the

composition of the floor,

(b)

Maintained in a state of good repair,

(c)

With a suitable slope for easy draining and provided with gutters and

(d)

Thoroughly washed daily with the drain water being led into a sewer through a closed

channel.

8.

Work benches- work benches on which a nitro or amino compound is manipulated

shall-

(a)

Have a smooth impervious surface preferably of stainless steel; and

(b)

Be washed daily with hose-pipe or cleaned by means of suction cleaning apparatus at the

time when no other work is carried on there at.

9.

Waste disposal –

(1)

There shall be provided a suitable receptacle made of non-absorbable material with a

tightly fitting cover for depositing waste material like cloth paper or other material soiled with a

nitro or amino compound.

(2)

Such receptacle shall be destroyed by burning or using other suitable methods under the

supervision of a responsible person.

10.

Disposal of empty containers – Empty containers used for holding compounds included

under Appendix-A shall be thoroughly cleaned of their contents and treated with an inactivating

agent before being discarded.

11.

Decontamination of Pits, Tanks etc.-

[PART IV

DELHI GAZETTE : EXTRAORDINARY

321

(a)

before a worker enters a pit, tank, kettle or any other confined space which contains a nitro

or amino compound it shall be thoroughly washed and cleaned.

(b)

No part of the plant which contains nitro or amino compounds shall be repaired or opened

for repairs unless it has been emptied of such compounds and thoroughly cleaned

&decontaminated.

(c)

Records of such treatments shall be maintained in a register approved by the Chief

Inspector-cum-Facilitator and the register shall be made available for inspection when required

by Inspector-cum-Facilitator.

12.

Manual handling – Controlled substances shall not be allowed to be mixed, filled,

emptied or handled except by means of a scoop with a handle. Such scoop shall be thoroughly

cleaned daily

13.

Protective wears- the occupier shall provide, maintain clean and in good condition

protective clothing and other equipment as specified in the table below:-

TABLE

Protective clothing and other equipment

(i)

For manipulation of

(ii)

(a)

Long trousers and shirts compounds

or

overalls with full sleeves and

head

coverings. The shirt or overall shall

cover the neck completely; and

(b)

rubber hand gloves, rubber

aprons, rubber gum boots and airline respirator

For manipulation of compounds

(a) White clean clothing

(iii)

Mentioned in Appendix-B

mentioned in (A) as above

In addition to white clean shirts. Singlet and protective equipment as mentioned in

(a)

above

(b)

White long sleeve apron

14.

Instructions regarding risk – Every worker on his first employment in the said processes

shall be fully instructed on the properties of the toxic chemicals to which he is likely to be exposed to, of

the dangers involved and the precautions to be taken. Workers shall also be instructed on the

measures to be taken to deal with an emergency.

15.

Medical examination by medical officer – (1) every worker employed in the processes

specified in paragraph 1 shall be examined by a Medical officer within15 days of his first

322

DELHI GAZETTE : EXTRAORDINARY

PART IV]

employment. Such examinations shall include skin test for dermatitis and no worker shall be

allowed to work after 15 days of his first employment in the factory unless certified fit for such

employment by the Medical officer.

(2)

Every worker employed in a manganese process shall be re-examined by a Medical officer

at least once in every three calendar months and such examination shall, wherever the Medical

officer considers appropriate, include all the tests in sub-paragraph (1).

(3)

The Medical officer after examining a worker shall issue a Certificate of Fitness in Form-

24. The record of examination and re-examinations carried out shall be entered in the Certificate

and the Certificate shall be kept in the custody of the occupier of the factory. The record of each

examination carried out under sub-paragraph (1) and (2), including the nature and the results of this

test, shall also be entered by the Medical officer in a health register in Form- 25.

(4)

The Certificate of Fitness and the health register shall be kept readily available for

inspection by the Inspector-cum-Facilitator.

(5)

If at any time the Medical officer is of the opinion that a worker is no longer fit for

employment in the said processes on the ground that continuance therein would involve special

danger to the health of the worker, he shall make a record of his findings in the said certificate and

the health register. The entry of his findings in those documents should also include the period for

which he considers that the said person is unfit to work in the said process shall be provided with

alternate placement facilities unless he is fully incapacitated in the opinion of the Medical officer,

in which case the person affected shall be suitably rehabilitated.

(6)

No person who has been found unfit to work as said in sub-paragraph (5) shall be re-

employed or permitted to work in the said processes unless the Medical officer , after further

examination, again certifies him fit for employment in those processes.

16.

Washing and bathing facilities –

(1)

The following washing and bathing facilities shall be provided and maintained in a clean state

and in good repair for the use of all workers employed in the said processes:-

(a)

a wash place under cover having constant supply of water and provided with clean

towels, soap and nail brushes and with at least one stand pipe for every five such workers;

(b)

50 percent of the stand pipes provided under clause (a) shall be located in bathrooms

where both hot and cold water shall be made available during the working hours of the factory

and for one hour thereafter;

(c)

The washing and bathing facilities shall be in close proximity of the area housing the said

processes;

(d)

Clean towels shall be provided individually to each worker; and

(e)

in addition to the taps mentioned under clause (a), one stand pipe, in which warm water is

made available, shall be provided on each floor.

(2)

Arrangement shall be made to wash factory uniforms and other work

clothes every day.

[PART IV

DELHI GAZETTE : EXTRAORDINARY

323

17.

Washing and bathing- (a) all the workers employed in the said manufacturing process

shall carefully wash their hands and faces before taking food or leaving factory.

(b) Bath register- the workers employed in the said manufacturing process shall take bath at

factory premises and will enter their names in the bath register as token of having done so.

18.

Food, drinks, etc. Prohibited in workroom – No worker shall consume food, drink, pan,

supari or tobacco or shall smoke in any workroom in which the said processes are carried on and

no worker shall remain in any such room during intervals for meals or rest.

19.

Cloakroom – There shall be provided and maintained in a clean state and in good repair

for the use of the workers employed in the said processes

(a)

a cloakroom with lockers having two compartments – one for street clothes and the other for

work clothes, and

(b)

a place separate from the locker room and the mess room, for the storage of protective

equipment provided under paragraph 7. The accommodation so provided shall be under the care

of a responsible person and shall be kept clean.

20.

Mess room – There shall be provided and maintained for the use of workers employed in

the said processes who remain on the premises during the meal intervals, a mess room which shall

be furnished with tables and benches and provided with suitable means for warming food. The

mess room shall be placed under the charge of a responsible person and shall be kept clean.

21.

Time allowed for washing – Before each meal and the end of the day at least 10 minutes

addition to the regular interval shall be allowed for washing to each person who has been employed

in the said process.

22.

Drying stoves- (a) every drying stove shall be efficiently ventilated to the outside air in

such a manner that hot air from stove shall not be drawn into any work room.

(b) No person shall enter into stove to remove the contents until a free current of air has been

passed through by mechanical means.

23.

non-sparking tools- non sparking tools shall be provided for the purpose

of cleaning or repairing machinery or operating any process where vapours of beta naphthyl amine

are evolved.

24.

Testing of atmosphere- Amines in the atmosphere of the work room where the

manufacturing process is carried on shall be estimated once in every week and records of such

estimations shall be made available when required by an Inspector-cum-Facilitator.

PART-II

25.

Separation of process- the said manufacturing process ‗B‘ shall be carried on in rooms

which shall not communicate with the other rooms except through a passage open entirely to

324

DELHI GAZETTE : EXTRAORDINARY

PART IV]

outside atmosphere.

26.

Limitation of exposure- (a) no worker under the age of 40 years shall be engaged in the

factory for the said manufacturing process ‗B for the first time after the date on which these rules

come into force.

(b) before the end of the day at least one hour shall be allowed for bathing to each person who is

employed in the said manufacturing process ‗B‘ including the time allowed under paragraph 22.

27.

Exemptions – If in respect of any factory, the Chief Inspector-cum- Facilitator is satisfied

that owing to the exceptional circumstances or infrequency of the processes or for any other reason,

all or any of the provisions of this schedule is not necessary for the protection of the workers in

the factory, the Chief Inspector-cum-Facilitator may be a certificate in writing (which he may in his

discretion revoke at any time), exempt such factory from all or any of such provisions subject to

such conditions, if any, as he may specify therein.

APPENDIX-A

[SEE PARAGRAPH 2, 10, 13]

The benzenes, Toluene, Xylenes, having undergone nitration once or several times (nitro, dinitro

and trinitro benzene and its homologues) and chlorinated compounds, nephelines, having

undergone nitration once or several times, anilines and its homologues( toludine, Xylidine,

cuminide) anisidine, phenetidine and their chlorinated nitrated and alkyl led compounds

(dimethylailine, toluylendiamine, toludine phenyhydrazine, toluylhydrazine)

APPENDIX-B

[SEE PARAGRAPH 2 & 13]

1.

Alphanaphthylamine

2.

betanaphthylamine

3.

Benzidine and its salts

4.

dianisidine

5.

Toludine

6.

Dichlorobenzidine

APPENDIX – C CAUTIONARY PLACARD/NOTICE

1.

Nitro and amino compounds are aromatic hydro carbons are dangerous .In this factory you

have to handle them carefully.

2.

All items of protective wear provided should be made use of to safeguard your health.

3.

Maintain cleanliness at all times. Before meals wash hands and feet. A bath before leaving

the factory is essential taking care to wash the hands well.

4.

If any chemicals fall on your body wash it off immediately with soap and water. Change

clothing at once. If soap with a cynoticnitromino compound contact the appointed doctor

immediately.

[PART IV

DELHI GAZETTE : EXTRAORDINARY

325

5.

Do not handle any nitro or amino compounds bare hand. Use a long handle scoop.

6.

Avoid alcoholic drinks as these can cause risk of poisoning.

7.

In case of illness contact the factory manager and the appointed doctor.

8.

Don‘t chew, eat, drink or smoke in the work room or with soiled hands. Keep food and

drinks away from the work place.

9.

If you work with betanaphthylamine or benzidine or its salt alphanapthalymine or

dianisidine :-

(a)

Remember the serious effects will follow after a number of year if great care is not taken

to observe absolute cleanliness of body, close, missionary and tools

(b)

At meal time wash face and hands twice with soap and water to remove all chemicals; wear

a long sleeve clean apron while eating

(c)

Before leaving the factory take a bath using soap and water twice after this put on your

home clothes

SCHEDULE – XIX

PROCESS OF EXTRACTING OILS AND FATS FROM VEGETABLES AND ANIMAL

SOURCES IN SOLVENT EXTRACTION PLANTS

1.

Definitions – For the purposes of this schedule –

(a)

―solvent extraction plant‖ means a plant in which the process of extracting oils and fats

from vegetable and animal sources by use of solvents is carried on;

(b)

―solvent‖ means an flammable liquid such as pentane, hexane and heptane use for the

recovery of vegetable oils;

(c)

―flameproof enclosure‖ as applied to electrical machinery or apparatus means an

enclosure that will withstand, when covers or other access doors are properly secured, an internal

explosion of the flammable gas or Vapour which may enter or which may originate inside the

enclosure without suffering damage and without communicating internal inflammation (or explosion)

to the external flammable gas or Vapour;

(d)

―competent person‖ for the purpose of this schedule shall be at least a member of the

Institution of Engineers ( India) or an Associate Member of the said Institution with 10 years‘

experience in a responsible position as may be approved by the Chief Inspector-cum-Facilitator:

Provided that a graduate in mechanical engineering or chemical technology with specialized

knowledge of oils and fats and with a minimum experience of 5 years in a solvent extraction plant

shall also be considered to a competent person.

Provided further that the Government may accept any other qualifications if in its opinion they

are equivalent to the qualifications aforesaid.

2.

Location and layout – (1) No solvent extraction plant shall be permitted to be constructed

326

DELHI GAZETTE : EXTRAORDINARY

PART IV]

or extended to within a distance of 30 meters from the nearest residential locality.

(2)

A 1.5-meter-high continuous wire fencing shall be provided around the solvent/extraction

plant up to a minimum distance of 15 meters from the plant.

(3)

No person shall be allowed to carry any matches or an open flame or fire

inside the area round by the fencing.

(4)

Boiler houses and other buildings where open flame processes are carried on shall be

located at least 30 meters away from the solvent extraction plant;

(5)

If god owns and preparatory processes are at a distance of less than 30 meters from the

solvent extraction plant, these shall be at least 15 meters distant from the plant, and a continuous

barrier wall of non-combustible material

1.5 meters high shall be erected at a distance of not less than 15 meters from the solvent

extraction plant so that it extends to at least 30 meters of Vapour travel around its ends from the

plant to the possible sources of ignition.

3.

Electrical installations – (1) all electrical motors and wiring and other electrical

equipment installed or housed insolvent extraction plant shall be of flameproof construction.

(2) All metal parts of the plant and building including various tanks and containers where solvents are

stored or are present and all parts of electrical equipment not required to be energized shall be

properly bonded together and connected to earth so as to avoid accidental rise in the electrical

potential of such parts above the earth potential.

4.

Restriction on smoking – Smoking shall strictly prohibited within 15 meters distance from

solvent extraction plant. For this purpose, ―NO smoking‖ signs shall be permanently displayed in

the area.

5.

Precautions against friction – (1) All tools and equipment including ladders, chains and

other lifting tackle required to be used in solvent extraction plant shall be of non-sparking type.

(2)

No machinery or equipment in any solvent extraction plant shall be belt driven, unless the

belt used is of such a type that it does not permit accumulation of static electricity to a dangerous

level.

(3)

No person shall be allowed to enter and work in the solvent extraction plant if wearing

clothes made of nylon or such other fiber that can generate static electrical charge, or wearing

footwear which is likely to cause sparks by friction.

6.

Firefighting apparatus – (1) Adequate number of portable fire extinguishers suitable for

use against flammable liquid fires shall be provided in the solvent extraction plant.

(2) An automatic water spray sprinkler system on a wet pipe or open-head deluge system with

sufficient supply of storage water shall be provided over solvent extraction plant and throughout

the building housing such plant.

7.

Precautions against power failure – Provision shall be made for the automatic cutting

[PART IV

DELHI GAZETTE : EXTRAORDINARY

327

off of steam in the event of power failure and also for emergency overhead water supply for

feeding water by gravity to condensers which shall come into play automatically with the power

failure.

8.

Magnetic Separators – Oil cake shall be fed to the extractor by a conveyer through a

hopper and a magnetic separator shall be provided to remove any pieces of iron during pressure

in the event of fire.

9.

Venting – (1) Tanks containing solvents shall be protected with emergency venting to

relieve excessive internal pressure in the event of fire.

(2) All emergency relief vents shall terminate at least 6 meters above the ground and be so

located that vapours will not re-enter the building in which solvent extraction plant is located.

10.

Waste water – Process waste water shall be passed through a flash evaporator to remove

any solvent before it is discharged into a sump which should be located within the fenced area

but not closer than 8 meters to the fence.

11.

Ventilation – The solvent extraction plant shall be well ventilated and if the plant is

housed in a building, the building shall be provided with mechanical ventilation with provision for at

least six air changes per hour.

12.

Housekeeping – (1) Solvents shall not be stored in an area covered by solvent extraction

plant except in small quantities which shall be stored in approved safety cans.

(2)

Waste materials such as oily rags, other wastes and absorbents used to wipe off solvent

and paints and oils shall be deposited in approved containers and removed from the premises at

least once a day.

(3)

Space within the solvent extraction plant and within 15 meters from the plant shall be

kept free form any combustible materials and any spills of oil or solvent, shall be cleaned up

immediately.

13.

Examination and repairs – (1) the solvent extraction plant shall be examined by the

competent person to determine any weakness or corrosion and wear once in every 12 months.

Report of such examination shall be supplied to the Inspector-cum-Facilitator with his observation

as to whether or not the plant is in safe condition to work.

(2)

No repairs shall be carried out to the machinery or plant except under the direct

supervision of the competent person.

(3)

Facility shall be provided for purging the plant with inert gas or steam before opening for

cleaning or repairs and before introducing solvent after repairs.

14.

Operating personnel – The operation of the plant and machinery in the solvent extraction

plant shall be in the charge of such duly qualified and trained persons as are certified by the

328

DELHI GAZETTE : EXTRAORDINARY

PART IV]

competent person to be fit for the purpose and no other person shall be allowed to operate the

plant and machinery.

15.

Employment of pregnant women and Adolescent – No pregnant woman or adolescent

shall be employed in the solvent extraction plant.

16.

Vapour detection – A suitable type of flameproof and portable combustible gas indicator

shall be provided and maintained in good working order and a schedule of routine sampling of

atmosphere at various locations as approved by the Chief Inspector-cum-Facilitator shall be

drawn out and entered in a register maintained for the purpose.

17.

Exemption – If in respect of any factory, the Chief Inspector-cum- Facilitator is satisfied

that owing to the exceptional circumstances or infrequency of the processes or for any other reason,

all or any of the provisions of this schedule is not necessary for the protection of the workers in

the factory, the Chief Inspector-cum-Facilitator may by a certificate in writing (which he may in his

discretion revoke at any time) exempt such factory from all or any of such provisions subject to

conditions, if any, as he may specify therein.

SCHEDULE – XX

MANUFACTURE OR MANIPULATION OF MANGANESE AND ITS COMPOUNDS

1.

Definitions – For the purposes of this schedule –

(a)

―manganese process‖ means processing, manufacture or manipulations of

manganese or any ore or any mixture containing manganese;

(b)

―first employment‖ means first employment in any manganese process and includes also

re-employment in any manganese process followed any cessation of employment for continuous

period of 3 calendar months.

(c)

―Manipulations‖ means mixing, blending, filling, emptying, grinding, sieving, drying, packing,

sweeping, or otherwise handling of manganese, or mixture containing manganese; and

(d)

―efficient exhaust ventilation‖ means localized ventilation effected by mechanical means

for the removal of dust or fume or at its source of origin so as to prevent it from escaping into the

atmosphere of any place where any work is carried on. No draught shall be deemed to be

efficient which fails to remove the dust or fume or mist at the point where it is generated and fails

to prevent it from escaping into and spreading into the atmosphere of a work place.

2.

Application – This schedule shall apply to every factory in which or in any part of which

any manganese process is carried on.

3.

Exemption – If in respect of any factory, the Chief Inspector-cum- Facilitator is satisfied

that owing to any exceptional circumstances, or infrequency of the process, or for any other

reason, application of all or any of the provisions of this schedule is not necessary for the protection

of the persons employed in such factory, he may by an order in writing which he may at his

discretion revoke, exempt such factory from all or any of the provisions on such conditions and

[PART IV

DELHI GAZETTE : EXTRAORDINARY

329

for such period as he may specify in the said order.

4.

Isolation of a process – Every manganese process which may give rise to dust, Vapour or

mist containing manganese, shall be carried on in a totally enclosed system or otherwise

effectively isolated from other processes so that other plants and processes and other parts of the

factory and persons employed on other processes may not be affected by the same.

5.

Ventilation of process – No process in which any dust, Vapour or mist containing

manganese is generated, shall be carried out except under an efficient exhaust ventilation which shall

be applied as near to the point of generation as practicable.

6.

Medical examination by medical officer – (1) Every worker employed in any

manganese process shall be medically examined by a Medical officer within 15days of his first

employment. Such examinations shall include tests for detection of serum calcium, serum

phosphate and manganese in blood and urine and also include steadiness tests and other neuro-

muscular coordination tests. No worker shall be allowed to work after 15 days of his first

employment in the factory unless certified for such employment by the Medical officer.

(2)

Every worker employed in a manganese process shall be re-examined by a Medical officer

at least once in every three calendar months and such examination shall, wherever the Medical

officer considers appropriate, include all the tests in sub-paragraph (1).

(3)

The Medical officer after examining a worker shall issue a Certificate of Fitness in Form-

24. The record of examination and re-examinations carried out shall be entered in the Certificate

and the Certificate shall be kept in the custody of the occupier of the factory. The record of each

examination carried out under sub-paragraph (1) and (2),including the nature and the results of this

test, shall also be entered by the medical officer in a health register in Form- 25.

(4)

The Certificate of Fitness and the health register shall be kept readily available for

inspection by the Inspector-cum-Facilitator.

(5)

If at any time the Medical officer is of the opinion that a worker is no longer fit for

employment in the said processes on the ground that continuance therein would involve special

danger to the health of the worker, he shall make a record of his findings in the said certificate and

the health register. The entry of his findings in those documents should also include the period for

which he considers that the said person is unfit to work in the said process shall be provided with

alternate placement facilities unless he is fully incapacitated in the opinion of the Medical officer,

in which case the person affected shall be suitably rehabilitated.

(6)

No person who has been found unfit to work as said in sub-paragraph (5) shall be re-

employed or permitted to work in the said processes unless the Medical officer, after further

examination, again certifies him fit for employment in those processes.

7.

Personal protective equipment – (1) the occupier of the factory shall provide and

maintain in good and clean condition suitable overalls and head coverings for all persons

330

DELHI GAZETTE : EXTRAORDINARY

PART IV]

employed in any manganese process and such overalls and head coverings shall be worn by the

persons while working on a manganese process.

(2)

The occupier of the factory shall provide suitable respiratory protective equipment for use

by works in emergency to prevent inhalation of dusts, fumes or mists. Sufficient number of

complete sets of such equipment shall always be kept near the work place and the same shall be

properly maintained and kept always in a condition to be used readily.

(3)

The occupier shall provide and maintain for the use of all persons employed, suitable

accommodation for the storage and make adequate arrangements for cleaning and maintenance if

personal protective equipment.

8.

Prohibition relating to pregnant women and Adolescent – No pregnant women or

adolescent shall be employed or permitted to work in any manganese process.

9.

Food, drinks, etc. Prohibited in the work rooms – No food, drink, pan and supari or

tobacco shall be allowed to be brought into or consumed by any worker in any workroom in which

any manganese process is carried on.

10.

Mess room – There shall be provided and maintained for the use of the persons

employed in a manganese process a suitable mess room which shall be furnished with sufficient

tables and benches and adequate means for warming of food. The mess room shall be placed

under the charge of a responsible person and shall be kept clean.

11.

Washing facilities – There shall be provided and maintained in a clean state and in good

condition, for the use of persons employed on manganese process –

(a)

A wash place under cover, with either –

(i)

a trough with a smooth impervious surface fitted with a waste pipe without plug, and of

sufficient length to allow at least 60 centimeters for every ten such persons employed at any one

time, and having a constant supply of water from taps or jets above the trough at intervals of not

more than 60 centimeters;

(ii)

at least on wash basin for every five such persons employed at any one time, fitted with a

waste pipe and plug and having a constant supply water; and

(b)

sufficient supply of soap or other suitable cleaning material and nail brushes and clean

towels.

12.

Cloakroom – If the Chief Inspector-cum-Facilitator so requires there shall be provided

and maintained for the use of persons employed in manganese process a cloakroom for clothing put

off during working hours with adequate arrangements for drying the clothing.

13.

Cautionary placard and instructions – Cautionary notices in the form specified in

appendix and printed in the language of the majority of the workers and employed, shall be affixed

in prominent places in the factory where they can be easily and conveniently read by the workers

and arrangement shall be made by the occupier to instruct periodically all workers employed in a

manganese process regarding the health hazards connected with their duties and the best

[PART IV

DELHI GAZETTE : EXTRAORDINARY

331

preventive measures and methods to protect themselves. The notices shall always be maintained

in a legible condition.

APPENDIX CAUTIONARY NOTICE

( Manganese and Manganese Compounds)

1.

Dust free and mists of manganese and its compounds are toxic when inhaled or when

ingested.

2.

Do not consume food or drink near the work place.

3.

Take a good wash before taking meals.

4.

Keep the working area clean.

5.

Use the protective clothing and equipment provided.

6.

When required to work in situations where dusts, fumes or mists are likely to be inhaled,

use respiratory protective equipment provided for the purpose.

7.

If you get severe head-aches, prolonged sleeplessness or abnormal sensations on the

body, report to the occupier who would make arrangements for your examination and treatment.

SCHEDULE – XXI

MANUFACTURE, HANDLING AND USAGE OF BENZENE AND SUBSTANCES

CONTAINING BENZENE

1.

Application – This schedule is made to provide protection against hazards of poisoning

from benzene and shall apply in respect of factories or parts

thereof in which benzene or substances containing benzene are manufactured, handled or used.

2.

Definitions – For the purpose of this schedule –

(a)

―substances containing benzene‖ means substances wherein benzene content exceeds 1

per cent by volume;

(b)

―substitute‖ means a chemical which is harmless or less harmful than benzene and can be

used in place of benzene;

(c)

―enclosed system‖ means a system which will not allow escape of benzene vapours to the

workers atmosphere; and

(d)

―efficient exhaust draught‖ means localized ventilated effected by mechanical means for

the removal of gases, vapours and dusts or fumes so as to prevent them from escaping into the air

of any workroom. No draught shall be deemed to be efficient if it fails to remove smoke generated

at the point where such gases, vapours, fumes or dusts originate.

332

DELHI GAZETTE : EXTRAORDINARY

PART IV]

3.

Prohibition and substitution –

(1)

Benzene and substances containing benzene shall not be used as solvent or dilutant unless

the process in which it is used is carried on in an enclosed system or unless the process is carried

on in manner which is considered equally safe as if it were carried out in an enclosed manner.

Use of benzene and substances containing benzene is prohibited in the following processes :-

(a)

manufacture of varnishes, paints and thinners; and

(b)

Cleaning and degreasing operations.

(2)

Where suitable substitutes are available, they shall be used instead of benzene or substances

containing benzene. This provision, however, shall not apply to the processes specified in

Appendix A.

(3)

The Chief Inspector-cum-Facilitator may, subject to confirmation by the Government,

permit exemptions from the percentage laid down in sub- paragraph 2(a) and also from the

provisions of sub-paragraph (2) of this paragraph temporarily under conditions and within limits of

time to be determined after consultation with the employers and workers concerned.

4.

Protection against installation –

(1)

The process involving the use of benzene or substances containing benzene shall be as far as

practicable be carried out in an enclosed system.

(2)

Where, however, it is not practicable to carry out the process in an enclosed system, the

workroom in which benzene or substances containing benzene are used shall be equipped with an

efficient exhaust draught or other means for the removal of benzene vapours to prevent their

escape into the air of the workroom so that the concentration of benzene in the air does not

exceed 10 parts per million by volume or30 milligrams per cubic meter.

(3)

Air analysis for the measurement of concentration of benzene vapours in air shall be

carried out every 8 hours or at such intervals as may be directed by the Chief Inspector-cum-

Facilitator at places where process involving use of benzene is carried on and the result of such

analysis shall be recorded in a register specially maintained for this purpose. If the concentration

of benzene vapours in air as measured by air analysis, exceeds 10 parts per million by volume or

30 milligrams per cubic meter, the occupier shall forthwith report the concentration to the Chief

Inspector-cum-Facilitator stating the reasons for such increase.

(4)

Workers who for special reasons are likely to be exposed to concentration of benzene in

the air of the workroom exceeding the maximum referred to in subparagraph (2) shall be provided

with suitable respirators or face masks. The duration of such exposure shall be limited as far as

possible.

5.

Measures against skin contact –

(1)

Workers who are likely to come in contact with liquid benzene or liquid substances

containing benzene shall be provided with suitable gloves, aprons, boots and where necessary

[PART IV

DELHI GAZETTE : EXTRAORDINARY

333

Vapour tight chemical goggles, made of material not affected by benzene or its vapours.

(2)

The protective wear referred to in sub-paragraph (1) shall be maintained in good condition

and inspected regularly.

6.

Prohibition relating to employment of pregnant women and Adolescent – No

pregnant woman or adolescent shall be employed or permitted to work in any workroom involving

exposure to benzene or substances containing benzene.

7.

Labelling – Every container holding benzene or substances containing benzene shall

have the word ―Benzene‖ and approved danger symbols clearly visible on it and shall also display

information on benzene content, warning about toxicity and warning about infallibility of the

chemical.

8.

Improper use of benzene-

(1)

The use of benzene substances containing benzene by workers for cleaning their hands or

their work clothing shall be prohibited.

(2)

Workers shall be instructed on the possible dangers arising from such misuse.

9.

Prohibition of consuming food, etc. in workrooms – No worker shall be allowed to

store or consume food or drink in the workroom in which benzene or substances containing benzene

are manufactured, handled or used. Smoking and chewing tobacco or pan shall be prohibited in

such workrooms.

10.

Instructions as regards risks – Every worker on his first employment shall be fully

instructed on the properties of benzene or substances containing benzene which he has to handle

and of the dangers involved. Workers shall also be instructed on the measures to be taken to deal

with in an emergency.

11.

Cautionary notices – Cautionary notices in the form specified in appendix and printed in

the language easily read and understood by the majority of the workers shall be displayed in

prominent places in the workrooms where benzene or substances containing benzene are

manufactured, handled or used.

12.

Washing facilities, cloakroom and mess room – In factories in which benzene or

substances containing benzene are manufactured, handled or used, the occupier shall provide and

maintain in a clean state and in good repair –

(a)

washing facilities under cover, of the standard of at least one tap for every 10 persons

having constant supply of water with soap, and a clean towel provided individually to each

worker if so ordered by the Inspector-cum- Facilitator;

(b)

cloakroom with lockers for each worker, having two compartments – one for street-

clothing and one for work-clothing; and

(c)

a mess room furnished with tables and benches with means for warming food, provided

334

DELHI GAZETTE : EXTRAORDINARY

PART IV]

that where a canteen or other proper arrangements exist for the workers to take their meals, the

requirements of mess room shall be dispensed with.

13.

Medical examination by Medical officer –

(1)

Every worker employed in the processes specified in paragraph 1 shall be examined by a

Medical officer within 15 days of his first employment. Such examinations shall include skin test

for dermatitis and no worker shall be allowed to work after 15 days of his first employment in the

factory unless certified fit for such employment by the Medical officer.

(2)

Every worker employed in a manganese process shall be re-examined by a Medical officer

at least once in every 12 months and such examination shall, wherever the Medical officer

considers appropriate, include all the tests in subparagraph (1).

(3)

The Medical officer after examining a worker, shall issue a Certificate of Fitness in Form-

24. The record of examination and re-examinations carried out shall be entered in the Certificate

and the Certificate shall be kept in the custody of the occupier of the factory. The record of each

examination carried out under sub-paragraph (1) and (2),including the nature and the results of this

test, shall also be entered by the Medical officer in a health register in Form- 25.

(4)

The Certificate of Fitness and the health register shall be kept readily available for

inspection by the Inspector-cum-Facilitator.

(5)

If at any time the Medical officer is of the opinion that a worker is no longer fit for

employment in the said processes on the ground that continuance therein would involve special

danger to the health of the worker, he shall make a record of his findings in the said certificate and

the health register. The entry of his findings in those documents should also include the period for

which he considers that the said person is unfit to work in the said process shall be provided with

alternate placement facilities unless he is fully incapacitated in the opinion of the Medical officer ,

in which case the person affected shall be suitably rehabilitated.

(6)

No person who has been found unfit to work as said in sub-paragraph (5) shall be re-

employed or permitted to work in the said processes unless the Medical officer, after further

examination, again certifies him fit for employment in those processes.

APPENDIX-A

[SEE CLAUSE 3(B)]

1

production of benzene

2

process where benzene is used for chemical synthesis

3

motor spirits (used as fuel)

[PART IV

DELHI GAZETTE : EXTRAORDINARY

335

APPENDIX-B [SEE CLAUSE 11]

CAUTIONARY NOTICE

(Benzene and substances containing benzene)

1.

Hazards

(a)

Benzene and substances containing benzene are harmful.+

(b)

Prolonged or repeated breathing of benzene vapours may result in acute or chronic

poisoning.

(c)

Benzene can also be absorbed through skin which may cause skin or other diseases.

2.

Preventive measures

(a)

Avoid breathing of benzene vapours.

(b)

Avoid prolonged or repeated contact of benzene with the skin.

(c)

Remove benzene soaked or wet clothing promptly.

(d)

If any time you are exposed to high concentration of benzene vapours and exhibit signs and

symptoms such as dizziness, difficulty in breathing, excessive excitation and losing of consciousness,

immediately inform your factory manager.

(e)

Keep all the containers of benzene closed

(f)

Handle, use and process benzene and substances containing benzene carefully in order to

prevent their spillage on floor.

(g)

Maintain good housekeeping.

3.

Protective equipment

(a)

Use respiratory protective equipment in places where benzene vapours are present in high

concentration.

(b)

In emergency, use self-generating oxygen mask or oxygen or air cylinder masks.

(c)

Wear hand gloves, aprons, goggles and gum boots to avoid contact of benzene with

your skin and body parts.

4.

First-aid measures in case of acute benzene poisoning

(a)

Remove the clothing immediately if it is wetted with benzene.

(b)

If liquid benzene enters eyes, flush thoroughly for at least 15 minutes with clean running

water and immediately secure medical attention.

(c)

In case of unusual exposure to benzene Vapour, call a physician immediately. Until he arrives,

do the following :-

(i)

If the exposed person is conscious –

336

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(a)

Move him to fresh air in open.

(b)

Lay down without a pillow and keep him quiet and warm.

(ii)

If the exposed person is unconscious –

(aa) Lay him down preferably on the left side with the head low.

(bb) Remove any false teeth, chewing gum, tobacco or other foreign objects which may be in his

mouth.

(cc) Provide him artificial respiration in case difficulty is being experienced in breathing.

(dd) In case of shallow breathing or cyanosis (blueness of skin, lips, ears, finger nail beds), he

should be provided with medical oxygen or oxygen carbon dioxide mixture. If needed, he should be

given artificial respiration. Oxygen should be administered by a trained person only.

SCHEDULE – XXII

MANUFACTURING PROCESS OR OPERATION IN CARBON DISULPHIDE

PLANTS

1.

Application – This schedule shall apply to all electric furnaces in which carbon

disulphide is generated and all other plants where carbon disulphide after generation, is

condensed, refined and stored. This schedule is in addition to and not in derogation of any of the

provisions of the Code and Rules made there under.

2.

Construction, installation and operation-

(1)

The buildings in which electric furnaces are installed and carbon disulphide after generation

is condensed and refined shall be segregated from other parts of the factory and shall be of open

type to ensure optimum ventilation and the plant layout shall be such that only a minimum number

of workers are exposed to the risk of any fire or explosion at any one time.

(2)

Every electric furnace and every plant in which carbon disulphide is condensed, refined

and stored with all their fittings and attachments shall be of good construction, sound material and of

adequate strength to sustain the internal pressure to which the furnace or the plant may be subjected

to and shall be so designed that carbon disulphide liquid and gas are in closed system during their

normal working.

(3)

The electric furnace supports shall be firmly grouted about 60 centimeters in concrete or by

other effective means.

(4)

Every electric furnace shall be installed and operated according to manufacturers‘

instructions and these instructions shall be clearly imparted to the personnel in charge of

construction and operation.

(5)

The instructions regarding observance of correct furnace temperature, sulphur dose,

admissible current or power consumption and periodical checking of charcoal level shall be strictly

complied with.

[PART IV

DELHI GAZETTE : EXTRAORDINARY

337

3.

Electrodes –

(1)

Where upper ring electrodes made of steel are used in the electric furnace, they shall be of

seamless tube construction and shall have arrangement for being connected t cooling water system

through a siphon built in the electrodes or through a positive pressure water-pump.

(2)

The arrangement for cooling water referred to in sub-paragraph (1) shall be connected

with automatic alarm system which will actuate in the event of interruption of cooling water in

the electrodes and give visible and audible alarm signals in the control room and simultaneously

stop power supply for the furnace operation and to stop the further supply of water. The alarm

system and the actuating device shall be checked every day.

4.

Charcoal level indicator and vibrator – Means shall be provided on each electric

furnace for indicating the correct level of charcoal in the furnace

and vibrating the charcoal. This mean shall employed often as necessary to maintain correct

charge and level of charcoal.

5.

Charcoal separator – A cyclone type of charcoal separator shall be fitted on the off-take

pipe between the electric furnace and sulphur separator to prevent entry of pieces of charcoal into

the condensers and piping.

6.

Rupture discs and safety seal –

(1)

At least two rupture discs of adequate size which shall blow off at a pressure twice the

maximum operating pressure shall be provided on each furnace and shall either be mounted

directly on the top of the furnace or each through an independent pipe as close as possible to the

furnace.

(2)

A safety water seal shall be provided and tapped from a point between the charcoal

separator and the sulphur separator.

7.

Pyrometer and manometers –

(1)

Each electric furnace shall be fitted with adequate number of pyrometers to give an

indication of the temperature as correctly as reasonably practicable at various points in the furnace.

The dials for reading the temperatures shall be located in the control room.

(2)

Manometers or any other suitable devices shall be provided for indicating pressure–

(a)

In the off-take pipe before and after the sulphur separator; and

(b)

In primary and secondary condensers.

8.

Check valves – All piping carrying carbon disulphide shall be fitted with check valves at

suitable positions so as to prevent gas from flowing back into any electric furnace in the event of

its shut down.

9.

Inspection and maintenance of electric furnaces –

338

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(1)

Every electric furnace shall be inspected internally by a competent person.

(a)

Before being placed in service after installation;

(b)

Before being placed in service after reconstruction or repairs; and

(c)

Periodically every time the furnace is opened for cleaning or de- or for replacing

electrodes.

(2)

When an electric furnace is shut down for cleaning or de–

(a)

The brick lining shall be checked for continuity and any part found defective removed;

(b)

After removal of any part of the lining referred to in (a) the condition of the shell shall be

closely inspected; and

(c)

Any plates forming shall found corroded to the extent that safety of the furnace is

endangered shall be replaced.

10.

Maintenance of records – The following hourly records shall be maintained in a logbook.

(a)

Manometer readings at the points specified in sub-paragraph 7(2);

(b)

Gas temperature indicated by pyrometers and all other vital points near the Sulphur

separator and primary and secondary condensers;

(c)

Water temperature and flow of water through the siphon in the electrodes; and

(d)

Primary and secondary voltages and current and energy consumed.

11.

Electrical apparatus, wiring and fittings – All buildings in which carbon disulphide is

refined or stored shall be provided with electrical apparatus, wiring and fittings which shall afford

adequate protection from fire and explosion.

12.

Prohibition relating to smoking – No person shall smoke or carry matches, fire or naked

light or other means of producing a naked light or spark in buildings in which carbon disulphide is

refined or stored, and a notice in the language understood by a majority of the workers shall be

posted in the plant prohibiting smoking and carrying of matches, fire or naked light or other means of

producing naked light or spark into such rooms.

13.

Means of escape – Adequate means of escape shall be provided and maintained to enable

persons to move to a safe place as quickly as possible in case of an emergency. At least two

independent staircases of adequate width shall be provided in every building housing the furnaces at

reasonable intervals at opposite ends. These shall always be kept clear of all obstructions and so

designed to afford easy passage.

14.

Warnings in case of fire – There shall be adequate arrangements for giving warnings in

case of fire or explosion which shall operate on electrically and in case of failure of electricity by

some mechanical means.

15.

Fire-fighting equipment –

(1)

Adequate number of suitable fire extinguishers or other fire-fighting equipment shall be

[PART IV

DELHI GAZETTE : EXTRAORDINARY

339

kept in constant readiness for dealing with risks involved and depending on the amount and nature

of materials stored.

(2)

Clear instructions as to how the extinguishers or other equipment should be used printed in

the language which the majority of the workers employed understand, shall be affixed to each

extinguisher or other equipment and the personnel trained in their use.

16.

Bulk Sulphur –

(1)

Open or semi-enclosed spaces for storage of bulk Sulphur shall be sited with due regard

to the dangers which may arise from sparks given off by nearby locomotives, etc., and

precautions shall be taken to see that flames, smoking and matches and other sources of ignition do

not come in contact with the clouds of dust arising during handling of bulk Sulphur.

(2)

All enclosures for bulk Sulphur shall be of non-combustible construction, adequately

ventilated and so designed as to provide a minimum of ledges on which dust may lodge.

(3)

The bulk Sulphur in the enclosures shall be handled in such a manner as to minimize the

formation of dust clouds and no flame, smoking and matches or other sources of ignition shall be

employed during handling and non-sparking tools shall be used whenever Sulphur is shoveled or

otherwise removed by hand.

(4)

No repairs involving flames, heat or use of hand or power tools shall be made in the

enclosure where bulk Sulphur is stored.

17.

Liquid Sulphur – Open flames, electric sparks and other sources of ignition, including

smoking and matches, shall be excluded from the vicinity of molten Sulphur.

18.

Training and supervision –

(1)

All electric furnaces and all plants in which carbon disulphide is condensed, refined or stored

shall be under adequate supervision at all times while the furnaces and plant are in operation.

(2)

Workers in charge of operation and maintenance of electric furnaces and the plants shall

be properly qualified and adequately trained.

19.

Washing facilities –

(1)

The occupier shall provide and maintain in a clean state and in good repair, for the use of all

persons employed wash place under cover with at least one tap or stand-pipe, having a constant

supply of clean water for every five such persons, the taps or stand-pipes being spaced not less

than 120 centimeters apart with a sufficient supply of soap and clean towels, provided that towels

shall be supplied individually to each worker if so ordered by the Inspector- cum-Facilitator.

(2)

All the workers employed in the Sulphur storage, handling and melting operations shall

be provided with a nail brush.

340

DELHI GAZETTE : EXTRAORDINARY

PART IV]

20.

Personal protective equipment –

(1)

Suitable goggles and protective clothing consisting of overalls without packets, gloves

and foot-wear shall be provided for the use of operatives –

(a)

when operating valves or cocks controlling fluids etc.,

(b)

drawing off a molten Sulphur from Sulphur pots;

(c)

handling charcoal or Sulphur.

(2)

Suitable respiratory protective equipment shall be provided and stored in the appropriate

place for use during abnormal conditions or in an emergency.

(3)

Arrangements shall be made for proper and efficient cleaning of all such protective

equipment.

21.

Cloakrooms – There shall be provided and maintained for the use of all persons

employed in the processes a suitable cloakroom for clothing put off during work hours and a

suitable place separate from the cloakroom for the storage or overalls or working clothes. The

accommodation so provided shall be placed in the charge of a responsible person and shall be

kept clean.

22.

Unauthorized persons – Only maintenance and repair personnel, persons directly connected

with the plant operation and those accompanied by authorized persons shall be admitted into the

plant.

SCHEDULE – XXIII

OPERATIONS INVOLVING HIGH NOISE LEVELS AND VIBRATION LEVELS

PART-A High Noise Level

1.

Application – This part of schedule shall apply to all operations in any manufacturing

process having high noise level.

2.

Definitions – For the purpose of this schedule –

(a)

―Noise‖ means any unwanted sound.

(b)

‖High noise level‖ means any noise level measured on the A-weighted scale is 85 Db or

above.

(c)

‖Decibel‖ means one-tenth of ―Bel‖ which is the fundamental division of a logarithmic scale

used to express the ratio of two specified or implied quantities, the number of ―Bels‖ denoting such a

ratio being the logarithm to the base the of 10 of this ratio. The noise level (or the sound pressure

level) 6 corresponds to a reference pressure of 20 x 10 power(-6) Newton per square meter or

0.0002 dynes per square centimeter which is the threshold of hearing, that is, the lowest sound

pressure level necessary to produce the sensation of hearing in average healthy listeners. The

[PART IV

DELHI GAZETTE : EXTRAORDINARY

341

decibel in abbreviated form is Db.

(d)

―Frequency‖ is the rate of pressure variations expressed in cycles per second or hertz.

(e)

―dBA‖ refers to sound level in decibels as measured on a sound level meter operating on

the A-weighting network with slow meter response.

(f)

―A-weighting‖ means making graded adjustments in the intensities of sound of various

frequencies for the purpose of noise measurement, so that the sound pressure level measured by an

instrument reflects the actual response of the human ear to the sound measured.

3.

Protection against noise –

(1)

In every factory, suitable, a suitable engineering control or administrative measures shall

be taken to ensure, so far as is reasonably practicable, that no worker is exposed to sound levels

exceeding the maximum permissible noise exposure levels specified in Tables 1 and 2.

Table 1

Permissible exposure in cases of continuous noise

Total time of exposure (continuous

Sound pressure level or

number of short-term exposures) a per

in dBA

day, in hours

8

85

6

87

4

90

3

92

1 ½

97

1

100

¾

102

½

105

¼

110

Notes: 1. No exposure in excess of 110 dBA is to be permitted.

2. For any period of exposure falling in between any figure and the next higher or lower figure as

indicated in column 1, the permissible sound pressure level is to be determined by extrapolation

on a proportionate basis.

Table 2

Permissible exposure levels of impulsive or impact noise

Peak sound pressure level in Dba

Permitted number of impulses or impact per

day

342

DELHI GAZETTE : EXTRAORDINARY

PART IV]

140

100

135

315

130

1,000

125

3,160

120

10,000

Notes: 1. No exposure in excess of 140 dB peak sound pressure level is permitted.

2. For any peak sound pressure level falling in between any figure and the next higher or lower

figure as indicated in column 1, the permitted number of impulses or impacts per day is to be

determined by extrapolation on a proportionate basis.

(2)

For the purposes of this schedule, if the variations in the noise level involve maximum at

intervals of one second or less, the noise is to be considered as a continuous one and the criteria

given in Table 1 would apply. In other cases, the noise is to be considered as impulsive or impact

noise and the criteria given in Table 2 shall apply.

(3)

When the daily exposure is composed of two or more periods of noise exposure at

different levels their combined effect should be considered, rather than the individual effect of

each. The mixed exposure should be considered to exceed the limit value if the sum of the

fractions C1/T1 + C2/T2 +.

Cn/Tn exceeds unity, -

Where the C1, C2 etc. Indicate the total time of actual exposure at a specified noise level and T1,

T2, etc. Denote the time of exposure of less than 90 dBA may be ignored in the above calculation.

(4)

Where it is not possible to reduce the noise exposure to the levels specified in sub-rule (1) by

reasonably practicable engineering control or administrative measures, the noise exposure shall

be reduced to the greatest extent feasible by such control measures, and each worker so exposed

shall be provided with suitable ear protectors so as to reduce the exposure to noise to the levels

specified in sub-rule (1).

(5)

Where the ear protectors provided in accordance with sub-paragraph

(2) and worn by a worker cannot still attenuate the noise reaching near his ear, as determined by

subtracting the attenuation value in Dba of the ear protectors concerned from the measured sound

pressure level, to a level permissible under Table 1 or Table2 as the case may be, the noise

exposure period shall be suitably reduced to correspond to the permissible noise exposures specified

in sub-paragraph (1).

(6)

(a) In all cases where the prevailing sound levels exceed the permissible levels specified in

sub-paragraph (1) there shall be administered an effective hearing conservation Programme

which shall include among other hearing conservation measures, pre-employment and

periodicalauditory surveys conducted on workers exposed to noise exceeding the permissible

levels, and rehabilitation of such workers either by reducing the exposure to the noise levels or by

transferring them to places where noise levels are relatively less or by any other suitable means.

[PART IV

DELHI GAZETTE : EXTRAORDINARY

343

4. Medical examination by Medical officer–

(1)

The occupier shall ensure that the workers who are likely to be exposed to high noise at

above exposure action value are subjected to periodical medical examination once in a year. The

medical examination shall include tests which the Medical officer may consider appropriate and

shall include determination of auditory thresholds for pure tones of 125, 250, 500, 1000, 2000,

4000 and 8000 cycles per second..

( 2) Every worker exposed to high noise level shall be examined by a Medical officer within 15

days of his first employment. No worker shall be allowed to work after 15 days of his first

employment in the factory unless certified fit for such employment by the Medical officer.

( 3) Every worker employed in process involving high noise shall be re- examined by a Medical

officer at least once in every 12 months and such examination shall, wherever the Medical officer

considers appropriate, include all the tests in subparagraph (1).

(4)

The Medical officer after examining a worker, shall issue a Certificate of Fitness in

Form-24. The record of examination and re- examinations carried out shall be entered in the

Certificate and the Certificate shall be kept in the custody of the occupier of the factory. The

record of each examination carried out under sub-paragraph (1) and (2),including the nature and

the results of this test, shall also be entered by the Medical officer in a health register in Form-05.

(5)

The Certificate of Fitness and the health register shall be kept readily available for inspection

by the Inspector-cum-Facilitator.

(6)

If at any time the Medical officer is of the opinion that a worker is no longer fit for

employment in the said processes on the ground that continuance therein would involve special

danger to the health of the worker, he shall make a record of his findings in the said certificate and

the health register. The entry of his findings in those documents should also include the period for

which he

considers that the said person is unfit to work in the said process shall be provided with alternate

placement facilities unless he is fully incapacitated in the opinion of the Medical officer , in which

case the person affected shall be suitably rehabilitated.

(7)

No person who has been found unfit to work as said in sub- paragraph (6) shall be re-

employed or permitted to work in the said processes unless the Medical officer, after further

examination, again certifies him fit for employment in those processes.

PART-B

HIGH VIBRATION LEVELS

1.

Applications

This part of the Schedule shall apply to all operations in a manufacturing part of the process having

high undesired vibrations.

344

DELHI GAZETTE : EXTRAORDINARY

PART IV]

2.

Definition:

(a)

―daily exposure‖ means the quantity of mechanical vibration to which a worker is exposed

during a working day, which takes account of the magnitude and duration of the vibration;

(b)

―Vibration‖ means a mechanical phenomenon where by oscillations occur about equilibrium

point. The oscillations may be periodic or random.

(c)

―high vibration‖ means any exposure greater than the exposure limit value and action value

specified in clause-3.

(d)

―exposure action value‖ means the level of daily exposure set out in clause-3 for any

worker which, if reached or exceeded, requires specified action to be taken to reduce risk;

(e)

―exposure limit value‖ means the level of daily exposure for any worker which must not be

exceeded, as specified in sub clause-3

(f)

―hand-arm vibration‖ means mechanical vibration which is transmitted into the hands and

arms during a work activity;

(g)

―mechanical vibration‖ means vibration occurring in a piece of machinery or equipment or in

a vehicle as a result of its operation; and

(h)

―whole-body vibration‖ means mechanical vibration which is transmitted into the body,

when seated or standing, through the supporting surface, during a work activity or as described in

sub clause 3(2).

3.

Exposure limit values and action values.

(1)

For hand-arm vibration

(a)

the daily exposure limit value is 5 m/s2 A(8);

( b) the daily exposure action value is 2.5 m/s2A(8), and daily exposure shall be ascertained on the

basis set out in the relevant National/ International Standards specified in table 1 below.

(2)

For whole body vibration

(a)

the daily exposure limit value is 1.15 m/s2A(8);

(b)

the daily exposure action value is 0.5 m/s2A(8), and daily exposure shall be ascertained on

the basis set out in the relevant National/ International Standards

Table 1

The Threshold Limit Values (TLVs) for exposure of the hand to vibration in X, Y, or Z direction of

axes in the three-dimensional system shall be as given below:

Total Daily Exposure

Maximum

value

of

frequency

weighted Duration (hours)

acceleration (m/s2) in any direction

4

to less than 8 hours

4

2 to less than 4 hours

6

1 to less than 2 hours

8

[PART IV

DELHI GAZETTE : EXTRAORDINARY

345

less than 1hour

12

3 Assessment of vibration exposure shall be made for each applicable direction (X, Y, Z)) since

vibration is a vector quantity (magnitude and direction). In each direction, the magnitude of the

vibration during normal operation of the power tool, machine or work piece should be expressed

by the root-mean- square (RMS) value of the frequency –weighted component acceleration, in

units of meter per second squared (m/s2)

4.

Assessment of risk to health due to vibration at the work place.

(1)

An occupier who carries out work which is liable to expose any Worker from vibration

shall make a suitable and sufficient assessment of the risk created by that work to the health and

safety of those and the risk assessment shall identify the control measures that need to be taken.

(2)

The risk assessment should be reviewed whenever it is felt the changes in the process makes

the earlier risk assessment no longer valid.

5.

Engineering control measures

(a)

Where it is not reasonably The occupier shall ensure that risk from the exposure of workers to

vibration is either eliminated at source or, where this is not reasonably practicable, reduced to as low a

level as is reasonably practicable to eliminate risk at source pursuant to paragraph.

(b)

and an exposure action value is likely to be reached or exceeded, the employer shall reduce

exposure to as low a level as is reasonably practicable by establishing and implementing a Programme

of engineering control measures which are appropriate to this type of activity.

(c)

The occupier shall ensure that the workers are provided with the following measures:-

(i)

work equipment of appropriate ergonomic design which, taking account of the work to be

done, produces the least possible vibration;

(ii)

the provision of auxiliary equipment which reduces the risk of injuries caused by vibration; and

install appropriate maintenance programmes for work equipment, the workplace and workplace

systems;

(iii)

Subject to sub clause 5, the employer shall ensure that his employees are not exposed to

vibration above an exposure limit value; and shall take necessary to identify the reasons for the limit

being exceeded and take appropriate steps to reduce the exposure to vibration to below limit value.

Provided that where the exposure of an employee to vibration is usually below the

exposure action value but varies markedly from time to time and may occasionally exceed the

exposure limit value.

Provided further that– any exposure to vibration averaged over one week is less than the

exposure limit value and there is evidence to show that the risk from the actual pattern of exposure

is less than the corresponding from constant exposure at the exposure limit value; and that the

(b) risk is reduced to as low a level as is reasonably practicable, taking into account the special

346

DELHI GAZETTE : EXTRAORDINARY

PART IV]

circumstances.

6.

Medical examination by Medical officer–

(1)

The occupier shall ensure that the workers who are likely to be exposed to vibration at

above exposure action value are subjected to periodical medical examination once in a year. The

medical examination shall include general and physical examination as well as special test for

Reynaud‘s phenomenon.

(2)

Every worker employed in the processes specified in paragraph 1 shall be examined by a

Medical officer within 15 days of his first employment. No worker shall be allowed to work after

15 days of his first employment in the factory unless certified fit for such employment by the

Medical officer.

(3)

Every worker employed in a manganese process shall be re-examined by a Medical officer

at least once in every 12 months and such examination shall, wherever the Medical officer

considers appropriate, include all the tests in subparagraph (1).

(4)

The Medical officer after examining a worker, shall issue a Certificate of Fitness in Form-

24. The record of examination and re-examinations carried out shall be entered in the Certificate

and the Certificate shall be kept in the custody of the occupier of the factory. The record of each

examination carried out under sub-paragraph (1) and (2),including the nature and the results of this

test, shall also be entered by the Medical officer in a health register in Form- 25.

(5)

The Certificate of Fitness and the health register shall be kept readily available for

inspection by the Inspector-cum-Facilitator.

(6)

If at any time the Medical officer is of the opinion that a worker is no longer fit for

employment in the said processes on the ground that continuance therein would involve special

danger to the health of the worker, he shall make a record of his findings in the said certificate and

the health register. The entry of his findings in those documents should also include the period for

which he considers that the said person is unfit to work in the said process shall be provided with

alternate placement facilities unless he is fully incapacitated in the opinion of the Medical officer ,

in which case the person affected shall besuitably rehabilitated.

(7)

No person who has been found unfit to work as said in sub-paragraph (5) shall be re-

employed or permitted to work in the said processes unless the Medical officer, after further

examination, again certifies him fit for employment in those processes.

7.

Personal Protective equipment

(1)

The occupier shall ensure that the worker who are likely to be exposed to high level of

vibration are provided with appropriate PPE and protective clothing confirming to national or

international standards. Such Personal Protective Equipment should include hand gloves and safety

shoes. The protective clothing shall be able to protect the workers from cold and dump.

(2)

The occupier shall ensure that workers are given periodical training in the use care and

[PART IV

DELHI GAZETTE : EXTRAORDINARY

347

maintenance of the Personal Protective Equipment.

8.

Administrative Control Measures

(1)

The occupier shall ensure that as far as reasonably practicable as all necessary control

measures are taken to ensure that the unwanted vibrations does not affect the health of the workers

employed in the process to which this part of schedule apply.

(2)

The occupier shall provide all workers with information instruction and training to be

adopted to limit the exposure limit values and action values as set out in sub clause-3.

(3)

Without prejudice to the generality of paragraph (1), the information, instruction and

training provided under that paragraph shall include–

I.

the exposure limit values and action values set out in sub clause -3.

II.

safe working practices to minimize exposure to vibration; and

III.

suitable and sufficient information and training for employees, such that work equipment

may be used correctly and safely, in order to minimize their exposure to vibration;

IV.

limitation of the duration and magnitude of exposure to vibration;

V.

appropriate work schedules with adequate rest periods; and

VI.

The information, instruction and training required by paragraph (2) shall be updated to take

account of significant changes in the type of work carried out or the working methods used by

the employer.

(4)

The Occupier shall display pictorial cautionary notices/warning signs at conspicuous

places where there are possibilities of workers being exposed to undesired high vibrations.

9.

Prohibition in employment of pregnant women, adolescent and persons with

disabilities.

No pregnant women or adolescent or persons with disabilities shall be employed in the process

covered by this part of the schedule

10.

Exemptions

If in respect of any factory, the Chief Inspector-cum-Facilitator is satisfied that owing to any

exceptional circumstances, or infrequently of the process, or for any other reason, application of all

or any of the provisions of this schedule is not necessary for the protection of the persons employed

in such factory, he may by an order in writing which he may at his discretion revoke, exempt such

factory from all or any of the provisions on such conditions and for such period as he may specify in

the said matter.

348

DELHI GAZETTE : EXTRAORDINARY

PART IV]

SCHEDULE – XXIV

MANUFACTURE OR MANIPULATION OF DANGEROUS PESTICIDES

1.

Application –This schedule shall apply in respect of all factories or any part thereof in

which the process of manufacture or manipulation of dangerous pesticide hereinafter referred to as

the said manufacturing process is carried on.

2.

Definitions – For the purpose of this Schedule –

(a)

―dangerous pesticides‖ means any product proposed or used for controlling, destroying or

repelling any pest or for preventing growth or mitigating effects of such growth including any of

its formulations which is considered toxic under and is covered by the Insecticides Act, 1968 and

the rules made there under and any other product, as may be notified from time to time by the

Government;

(b)

―manipulation‖ includes mixing, blending, formulating, filling, emptying, packing or

otherwise handling;

(c)

―efficient exhaust draught‖ means localized mechanical ventilation for removal of smoke,

gas, Vapour, dust, fume or mist so as to prevent them from escaping into the air of any work room

in which work is carried on. No exhaust draught shall be considered efficient if it fails to remove

smoke generated at the point where such gas, fume, dust, Vapour or mist originates from the process.

3.

Instruction to workers – Every worker on his first employment shall be fully instructed

on the properties including dangerous properties of the chemicals handled in the said manufacturing

process and the hazards involved. The employees shall also be instructed in the measures to be

taken to deal with any emergency. Such instructions shall be repeated periodically.

4.

Cautionary notice and placards – Cautionary notices and placards in the form specified

in appendix to this schedule and printed in the language of the majority of the workers shall be

displayed in all work places in which said manufacturing process is carried on so that they can be

easily and conveniently read by the workers. Arrangements shall be made by the occupier and the

manager of the factory to periodically instruct the workers regarding the health hazards arising to in

the said manufacturing process and methods of protection. Such notices shall include brief

instructions regarding the periodical clinical tests required to be undertaken for projecting health

of the workers.

5.

Prohibition relating to employment of pregnant women or Adolescent

– No pregnant woman or adolescent shall be employed or permitted to work in any room in which

the said manufacturing process is carried on or in any room in which dangerous pesticide is stored.

6.

Food drinks, and smoking prohibition – (1) No food, drink, tobacco, pan or supari shall

be brought into or consumed by any worker in any workroom in which the said manufacturing

process is carried out.

(2) Smoking shall be prohibited in any workroom in which the said manufacturing process is carried

out.

[PART IV

DELHI GAZETTE : EXTRAORDINARY

349

7.

Protective clothing and protective equipment – (1) Protective clothing consisting of

long pants and shirts or overalls with long sleeves and head coverings shall be provided for all

workers employed in the said manufacturing process.

(2)

(a) Protective equipment consisting of rubber gloves, gum boots, rubber

aprons, chemical safety goggles and respirators shall be provided for all workers employed in the

said manufacturing process.

(b) Gloves, boots, aprons shall be made from synthetic rubber where a pesticide contains oil.

(3)

Protective clothing and equipment shall be worn by the workers supplied with such

clothing and equipment.

(4)

Protective clothing and equipment shall be washed daily from inside and outside if the

workers handle pesticides containing nicotine or phosphorous and shall be washed frequently if

handling other pesticides.

(5)

Protective clothing and equipment shall be maintained in good condition.

8.

Floors and work-benches – (1) Floors in every workroom where dangerous pesticides are

manipulated shall be of cement or other impervious material giving a smooth surface.

(2)

Floors shall be maintained in good repair, provided with adequate slope leading to a drain

and thoroughly washed once a day with the hose pipe.

(3)

Work-benches where dangerous pesticides are manipulated shall be made of smooth, non-

absorbing material preferably stainless steel and shall be cleaned at least once daily.

9.

Spillage and waste – (1) If a dangerous pesticide during its manipulation splashes or

spills on the work-bench, floor or on the protective clothing worn by a worker, immediate action

shall be taken for through decontamination of such areas or articles.

(2)

Cloth, rags, paper or other material soaked or soiled with a dangerous pesticide shall be

deposited in a suitable receptacle with tight fitting cover. Contaminated waste shall be destroyed

by burning at least once a week.

(3)

Suitable deactivating agents, where available, shall be kept in a readily accessible place

for use while attending to a spillage.

(4)

Easy means of access shall be provided to all parts of the plant for cleaning, maintenance

and repairs.

10.

Empty containers used for dangerous pesticides – Containers used for dangerous

pesticides shall be thoroughly cleaned of their contents and treated with an inactivating agent

before being discarded or destroyed.

11.

Manual handling – (1) A dangerous pesticide shall not be required or allowed to be

manipulated by hand except by means of a long-handled scoop.

350

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(2) Direct contact of any part of the body with a dangerous pesticide during its manipulation shall

be avoided.

12.

Ventilation – (1) In every workroom or area where a dangerous pesticide is manipulated,

adequate ventilation shall be provided at all times by the circulation of fresh air.

(2)

Unless the process is completely enclosed, the following operations during manipulation of

a dangerous pesticide shall not be undertaken without an efficient exhaust draught :-

(a)

emptying a container holding a dangerous pesticide;

(b)

blending a dangerous pesticide;

(c)

preparing a liquid or powder formulation containing a dangerous pesticide; and

(d)

Changing or filling a dangerous pesticide into a container, tank hopper or machine or small

sized containers.

(3)

In the event of a failure of the exhaust draught provided on the above operation, the said

operations shall be stopped forthwith.

(4)

(i) All equipment for the extraction or suppression of dust shall at least once in every six

months be examined and tested by competent person, and any defect disclosed by such

examination and test shall be rectified as soon as practicable.

(ii) A register containing particulars of such examination and tests shall be kept in Form-50.

13.

Time allowed for washing – (1) Before each meal and before the end of the day‘s work at

least ten minutes in addition to the regular rest interval shall be allowed for washing to each

worker engaged in the manipulation of dangerous pesticide.

(2) Every worker engaged in the manipulation of dangerous pesticides shall have a thorough

wash before consuming any food and also at the end of the day‘s work.

14.

Washing and bathing facilities – (1) There shall be provided and maintained in a

clean state and in good repair for the use of all workers employed in the factory where the said

manufacturing process is carried on, adequate washing and bathing places having a constant

supply of water under cover at the rate of one such place for every 5 persons employed.

(2)

The washing places shall have standpipes placed at intervals of not less than one meter.

(3)

Not less than one half of the total number of washing places shall be provided with

bathrooms.

(4)

Sufficient supply of clean towels made of suitable material shall be provided :

Provided that such towels shall be supplied individually for each worker is so ordered

by the Inspector-cum-Facilitator.

(5)

Sufficient supply of soap and nail brushes shall be provided.

15.

Cloakroom – There shall be provided and maintained for the use of all workers

employed in the factory where the said manufacturing process is carried on –

[PART IV

DELHI GAZETTE : EXTRAORDINARY

351

(a)

a cloakroom for clothing put off during working hours with adequate arrangements for

drying clothing, if wet; and

(b)

separate and suitable arrangements for the storage of protective clothing provided under

paragraph 7.

16.

Mess room – (1) There shall be provided and maintained for the use of all workers

employed in the factory in which the said manufacturing process is carried on and remaining on the

premises during the rest intervals, suitable mess room which shall be furnished with –

(a)

sufficient tables and benches with back rest, and

(b)

Adequate means for warming food.

(2) The mess room shall be placed under the charge of responsible person and shall be kept clean.

17.

Manipulation not be undertaken – Manufacture or manipulation of a pesticides shall

not be undertaken in any factory unless a certificate regarding its dangerous nature or otherwise is

obtained from the Chief Inspector-cum- Facilitator.

18.

Medical examination by medical officer – (1) every worker employed in the processes

specified in paragraph 1 shall be examined by a Medical officer within15 days of his first

employment. Such examinations in respect of Halogenated Pesticides, shall include tests for

determination of chemical in blood and in fat tissues, E.E.G. abnormalities and memory tests. In

respect of organo phosphate compounds, such examinations shall include tests for depression of

cholinesterase in plasma and red blood cells. No worker shall be allowed to work after 15 days of

his first employment in the factory unless certified fit for such employment by the Medical

officer.

(2)

Every worker employed in the said process shall be re-examined by a Medical officer at

least once in every six calendar months. Such examination shall, wherever the Medical officer

considers appropriate, include the tests specified in sub-paragraph (1). Further every worker

employed in the said processes shall also be examined once in every three months by the factory

medical officer.

(3)

The Medical officer after examining a worker, shall issue a Certificate of Fitness in Form-

24. The record of examination and re-examinations carried out shall be entered in the Certificate

and the Certificate shall be kept in the custody of the occupier of the factory. The record of each

examination carried out under subparagraph(1) and (2), including the nature and the results of

these test, shall also be entered by the medical officer in a health register in Form-05.

(4)

The Certificate of Fitness and the health register shall be kept readily available for

inspection by the Inspector-cum-Facilitator.

(5)

If at any time the Medical officer is of the opinion that a worker is no longer fit for

employment in the said processes on the ground that continuance there in would involve special

352

DELHI GAZETTE : EXTRAORDINARY

PART IV]

danger to the health of the worker, he shall make a record of his findings in the said certificate and

the health register. The entry of his findings in those documents should also include the period for

which he considers that the said person is unfit to work in the said process shall be provided with

alternate placement facilities unless he is fully incapacitated in the opinion of the Medical officer,

in which case the person affected shall be suitably rehabilitated.

(6)

No person who has been found unfit to work as said in sub-paragraph (5) shall be re-

employed or permitted to work in the said processes unless the Medical officer, after further

examination, again certifies him fit for employment in those processes.

20. Exemption – If in respect of any factory the Chief Inspector-cum- Facilitator is satisfied that

owing to the exceptional circumstances or the infrequency of the said manufacturing process or

for any other reason which shall record in writing all or any of the provisions of this schedule are

not necessary for the protection of workers employed in the factory, he may by a certificate in

writing exempt such factory, from all or any of the provisions on such condition as he may specify

therein

APPENDIX

CAUTIONARY NOTICE

(Insecticides and pesticides)

1.

Chemicals handled in this plant are poisonous substances.

2.

Smoking, eating food or drinking, chewing tobacco in this area is prohibited. No food stuff or

drink shall be brought in this area.

3.

Some of these chemicals may be absorbed through skin and may cause poisoning.

4.

A good wash shall be taken before meals.

5.

A good bath shall be taken at the end of this shift.

6.

Protective clothing and equipment supplied shall be used while working in this area.

7.

Containers of pesticides shall not be used for keeping food stuffs.

8.

Spillage of the chemicals on any part of the body or on the floor or workbench shall

be immediately washed away with water.

9.

Clothing contaminated sue to splashing shall be removed immediately.

10.

Scrupulous cleanliness shall be maintained in this area.

11.

Do not handle pesticides with bare hands, use scoops provided with handle.

12.

In case of sickness like nausea, vomiting, giddiness, the manager should be informed who

will make necessary arrangements for treatment.

13.

All workers shall report for the prescribed medical tests regularly to protect their own

health.

[PART IV

DELHI GAZETTE : EXTRAORDINARY

353

SCHEDULE – XXV

MANUFACTURE OF RAYON BY VISCOSE PROCESS

1.

Definitions – For the purpose of this schedule –

(a)

―approved‖ means approved for the time being in writing by the Chief Inspector-cum-

Facilitator;

(b)

―breathing apparatus‖ means a helmet or face piece with necessary connections by means

of which the person using it in a poisonous, asphyxiating or irritant atmosphere breathes unpolluted

air; or any other approved apparatus;

(c)

―churn‖ means the vessel in which alkali cellulose pulp is treated with carbon disulphide;

(d)

―dumping‖ means transfer of cellulose xanthate from a dry churn to a dissolver;

(e)

―efficient exhaust draught‖ means localized ventilation by mechanical means for the removal

of any gas or Vapour, so as to prevent it from escaping into the air of any place in which work is

carried on. No draught shall be deemed to be efficient if it fails to control effectively any gas or

Vapour generated at the point where such gas or fume originates;

(f)

―fume process‖ means any process in which carbon disulphide or hydrogen sulphide is

produced, used or given off;

(g)

―life belt‖ means a belt made of leather or other suitable material which can be securely

fastened round the body with a suitable length of rope attached to it, each of which is sufficiently

strong to sustain the weight of a man;

(h)

‖protective equipment‖ means apron, goggles, face shields, footwear, gloves and overalls

made of suitable materials.

2.

Ventilation –

(1)

In all workrooms where a fume process is carried on, adequate ventilation by natural or

mechanical means shall be provided so as to control, in association with other control measures, the

concentration of carbon-di-sulphide and hydrogen sulphide in the air of every work environment

within the permissible limits.

(2)

Notwithstanding the requirements in sub-paragraph (1) an efficient exhaust draught shall be

provided and maintained to control the concentration of carbon- disulphide and hydrogen sulphide in

the air at the following locations :-

(a)

dumping hoppers of dry churns;

(b)

spinning machines;

(c)

trio rollers and cutters used in steple fiber spinning;

354

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(d)

gydro-extractors for yarn cakes;

(e)

after treatment processes; and

(f)

spin baths.

(3)

In so far as the spinning machines and trio rollers and cutters used in staple fiber spinning

are concerned, they shall be, for the purpose of ensuring the effectiveness of the exhaust draft to

be provided as required in sub-paragraph (1), enclosed as fully as practicable and provided with

suitable shutters in sections to enable the required operations to be carried out without giving rise

to undue quantities of carbon-di-dulphide escaping to the work environment.

(4)

No dry churn shall be opened after completion of reaction without initially exhausting the

residual vapours of carbon-di-sulphide by operation of a suitable and efficient arrangement for

exhausting the vapours which shall be continued to be operated as long as the churn is kept

opened.

(5)

Whenever any ventilation apparatus normally required for the purpose of meeting the

requirements in sub-paragraphs (2), (3), and (4) is ineffective, fails, or is stopped for any purpose

whatsoever, all persons shall be required to leave the work areas where the equipment or processes

specified in the above said sub-paragraphs are in use, as soon as possible, and in any case not later

than 15 minutes after such an occurrence.

(6)

(a) All ventilating systems provided for the purposes as required in subparagraphs(2), (3)

and (4) shall be examined and inspected once every week by a responsible person. It shall be

thoroughly examined and tested by a competent person once In every period of 12 months. Any

defects found by such examinations or test shall be rectified forthwith.

(b) A register containing particulars of such examinations and tests, and the state of the systems

and the repairs or alterations (if any) found to be necessary

shall be kept and shall be available for inspection by an Inspector-cum-Facilitator.

3.

Waste from spinning machines- Waste yarn from the spinning machines shall be

deposited in suitable containers provided with close fitting covers. Such waste shall be disposed

of as quickly as possible after decontamination.

4.

Lining of dry churns – The inside surface of all dry churns shall be coated with a non-

sticky paint so that cellulose xanthate will not stick to the surface of the churn. Such coating shall be

maintained in good condition.

5.

Air monitoring –

(1)

To ensure the effectiveness of the control measures, monitoring of carbon- disulphide and

hydrogen sulphide in air shall be carried out once at least in every shift and the record of the

results so obtained shall be entered in a register specially maintained for the purposes.

(2)

For the purpose of the requirement in sub-paragraph (1), instantaneous gas detector tubes

[PART IV

DELHI GAZETTE : EXTRAORDINARY

355

shall not be used. Samples shall be collected over duration of not less than 10 minutes and

analyzed by an approved method. The locations where such monitoring is to be done shall be as

directed by the Inspector-cum- Facilitator.

(3)

If the concentration of either carbon disulphide or hydrogen sulphide exceeds the permissible

limits for such Vapour or gas as laid down in Rules, suitable steps shall be taken for controlling the

concentrations in air of such contaminants. A report of such occurrences shall be sent to the Chief

Inspector-cum- Facilitator forthwith.

6.

Prohibition to remain in fume process room – No person during his intervals for meal,

or rest shall remain in any room wherein fume process is carried on.

7.

Prohibition relating to employment of Adolescent – No adolescent shall be employed

or permitted to work in any fume process or in any room in which any such process is carried on.

8.

Protective equipment – (1) the occupier shall provide and maintain in good condition

protective equipment as specified in the Table for use of persons employed in the processes referred

to therein.

Table

Name of Process

Name of Protective equipment 1

2

Dumping

Overalls, face-shields, gloves and footwear. All made of suitable material

2

Spinning

Suitable aprons, gloves and footwear

3

Process involving or likely

Suitable gloves and footwear to involve

contact with

viscose solution

4

Handling of Sulphur

Suitable chemical goggles

5

Any other process

Protective

equipment

as

may

be

involving contact with directed by the Chief Inspector-cum- hazardous chemicals Facilitator by

an order in writing

(2) A suitable room, rooms or lockers shall be provided exclusively for the storage of all

protective equipment supplied to workers and no such equipment shall be stored at any place other

than the room, rooms or lockers so provided.

9.

Breathing apparatus – (1) There shall be provided in every factory where fume process

is carried on, sufficient supply of –

(a)

breathing apparatus,

(b)

oxygen and a suitable appliances for its administration, and

356

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(c)

life belts.

(2) (a) The breathing apparatus and other appliances referred to in subparagraph

(1) shall be maintained in good condition and kept in appropriate locations so as to be readily

available.

(b)

The breathing apparatus and other appliances referred to in clauses (a) and (b) of sub-

paragraph (1) shall be cleaned and disinfected at suitable intervals and thoroughly inspected once

every month by a responsible person.

(c)

A record of the maintenance of the condition of the breathing apparatus and other

appliances referred to in sub-clause (1) shall be entered in a register provided for that purpose

which shall be readily available for inspection by an Inspector-cum-Facilitator.

(3)

Sufficient number of workers shall be trained and periodically retrained in the use of

breathing apparatus and administering artificial respiration so that at least 2 such trained persons

would be available during all the working hours in each room in which fume process is carried on.

(4)

Breathing apparatus shall be kept properly labelled in clean, dry, light-proof cabinets and if

liable to be affected by fumes, shall be protected by placing them in suitable containers.

(5)

No person shall be employed to perform any work for which breathing apparatus is

necessary to be provided under sub-paragraph (1) unless he has been fully instructed in the proper

use of that equipment.

(6)

No breathing apparatus provided in pursuance of sub-paragraph (1) which has been worn by

a person shall be worn by another person shall be worn by another person unless it has been

thoroughly cleaned and disinfected since last being worn and the person has been fully instructed

in the proper use of that equipment.

10.

Electric fittings – All electric fittings in any room in which carbon-di- sulphide is

produced, used or given off or is likely to be given off into the work environment, other than a

spinning room, shall be of flame-proof construction and all electric conduct or shall either be

enclosed in metal conduits or be lead- sheathed.

11.

Prohibition relating to smoking, etc. – No person shall smoke or carry matches, fire or

naked light or other means of producing a naked light or spark in a room in which fume process is

carried on.

A notice in the language understood by the majority of the workers shall be posted at prominent

locations in the plant prohibiting smoking and carrying of matches, fire or naked light or other

means of producing naked light or spark into such rooms.

Provided that fire, naked light or other means of producing a naked light of spark maybe

carried on in such room only when required for the purposes of the process itself under the direction

of a responsible person.

12.

Washing and bathing facilities – (1)There shall be provided and maintained in a clean

state and in good repair for the use of all workers employed and in the processes covered by the

[PART IV

DELHI GAZETTE : EXTRAORDINARY

357

schedule, adequate washing and bathing places having a constant supply of water under cover at

the rate of one such place for every 25 persons employed.

(2)

The washing places shall have stand pipes placed at intervals of not less than one meter.

(3)

Not less than one half of the total number of washing places shall be provided with

bathrooms.

(4)

Sufficient supply of clean towels made of suitable material shall be provided. Provided that

such towels shall be supplied individually for each worker if so ordered by the Inspector-cum-

Facilitator.

(5)

Sufficient supply of soap and nail brushes shall be provided.

13.

Rest Room –

(1)

A rest room shall be provided for the workers engaged in doffing operations of filament yarn

spinning process.

(2)

Such rest room shall be provided with fresh air supply and adequate seating arrangement.

14.

Cautionary notice and instructions – (1) the following cautionary notice shall be

prominently displayed in each fume process room.

Cautionary Notice

I.

Carbon disulphide (CS2) and Hydrogen Sulphide (H2S) which may be present in this room

are hazardous to health.

II.

Follow safety instructions.

III.

Use protective equipment and breathing apparatus as and when required.

IV.

Smoking is strictly prohibited in this area.‖

This notice shall be in a language understood by the majority of the workers and displayed where

it can be easily and conveniently read. If any worker is illiterate, effective steps shall be taken to

explain carefully to him the contents of the notice so displayed.

(2)

Arrangements shall be made to instruct each worker employed in any room in which a

fume process is carried on regarding the health hazards connected with their work and the

preventive measures and methods to protect themselves. Such instructions shall be given on his

first employment and repeated periodically.

(3)

Simple and special instructions shall be framed to ensure that effective measures will be

carried out in case of emergency involving escape of carbon di-sulphide and hydrogen sulphide.

Those instructions shall be displayed in the concerned areas and workers shall be instructed and

trained in the actions to be taken in such emergencies.

15.

Medical examination by medical officer – (1) every worker employed in the processes

specified in paragraph 1 shall be examined by a Medical officer within15 days of his first

358

DELHI GAZETTE : EXTRAORDINARY

PART IV]

employment. Such examinations shall include skin test for dermatit is and no worker shall be

allowed to work after 15 days of his first employment in the factory unless certified fit for such

employment by the Medical officer.

(2)

Every worker employed in a manganese process shall be re-examined by a Medical officer

at least once in every three calendar months and such examination shall, wherever the Medical

officer considers appropriate, include all the tests in sub-paragraph (1).

(3)

The Medical officer after examining a worker shall issue a Certificate of Fitness in Form-

24. The record of examination and re-examinations carried out shall be entered in the Certificate

and the Certificate shall be kept in the custody of the occupier of the factory. The record of each

examination carried out under sub-paragraph (1) and(2) including the nature and the results of

these test, shall also be entered by the Medical officer in a health register in Form-05.

(4)

The Certificate of Fitness and the health register shall be kept readily available for

inspection by the Inspector-cum-Facilitator.

(5)

If at any time the Medical officer is of the opinion that a worker is no longer fit for

employment in the said processes on the ground that continuance there in would involve special

danger to the health of the worker, he shall make a record of his findings in the said certificate and

the health register. The entry of his findings in those documents should also include the period for

which he considers that the said person is unfit to work in the said process shall be provided with

alternate placement facilities unless he is fully incapacitated in the opinion of the Medical officer ,

in which case the person affected shall be suitably rehabilitated.

(6)

No person who has been found unfit to work as said in sub-paragraph

(7) shall be re-employed or permitted to work in the said processes unless the Medical officer,

after further examination, again certifies him fit for employment in those processes.

17. Exemptions – If in respect of any factory, the Chief Inspector-cum- Facilitator is satisfied

that owing to the exceptional circumstances or in frequency of the processes or for any other

reason, all or any of the provisions of this schedule is not necessary for the protection of the workers

in the factory, the Chief Inspector-cum-Facilitator may be a certificate in writing which he may in

his discretion revoke at any time, exempt such factory from all or any of such provisions subject to

such conditions, if any, as he may specify therein.

SCHEDULE – XXVI

HIGHLY FLAMMABLE LIQUIDS AND FLAMMABLE COMPRESSED GASES

1.

Application – These rules will be applicable to all factories where highly flammable

liquids or flammable compressed gases are manufactured, stored, handled or used.

2.

Definition – For the purpose of this schedule –

(a)

―highly flammable liquid‖ means any liquid including its solution, emulsion , or

suspension which when tested in a manner specified by sections 14 and 15 of the Petroleum Act,

1934, (30 of 1934) gives off flammable vapours at a temperature less than 32 degree centigrade;

[PART IV

DELHI GAZETTE : EXTRAORDINARY

359

(b)

―flammable compressed gas‖ means flammable compressed gas as defined in section 2 of

the Static and Mobile Pressure Vessels (Unfired) Rules 1981 framed under the Explosive Act,

1884.

3.

Storage –

(1)

Every flammable liquid or flammable compressed gas used in every factory shall be stored in

suitable fixed storage tank, or in suitable closed vessel located in a safe position under the ground,

in the open or in a store room of adequate fire-resistant construction.

(2)

Except as necessary for use, operation or maintenance, every vessel or tank which

contains or had contained highly flammable liquid or flammable

compressed gas shall be always kept closed and all reasonably practicable steps shall be taken to

contain or immediately drain off to a suitable container any spill or leak that may occur.

(3)

Every container, vessel, tank, cylinder, or store room used for storing highly flammable

liquid or flammable compressed gas shall be clearly and in bold letters marked ―Danger-

Highly Flammable Liquid‖ or ―Danger- Flammable Compressed Gas‖.

4.

Enclosed Systems for Conveying Highly Flammable Liquids – Wherever it is

reasonably practicable, highly flammable liquids shall be conveyed within a factory in totally enclosed

systems consisting of pipe lines, pumps and similar appliances from the storage tank or vessel to

the point of use. Such enclosed systems shall be so designed, installed, operated and maintained as

to avoid leakage or the risk of spilling.

5.

Preventing Formation of Flammable Mixture with Air – Wherever there is a possibility

for leakage or spill of highly flammable liquid or flammable compressed gas from any equipment,

pipe line, valve, joint or other part of a system, all practicable measures shall be taken to contain,

drain off or dilute such spills or leakage as to prevent formation of flammable mixture with air.

6.

Prevention of Ignition –

(1)

In every room, work place or other location where highly flammable liquid or flammable

combustible gas is stored, conveyed, handled or used or where there is danger of fire or explosion

from accumulation of highly flammable liquid or flammable compressed gas in air, all

practicable measures shall be taken to exclude the sources of ignition. Such precautions shall

include the following:

(a)

All electrical apparatus shall either be excluded from the area of risk or they shall be of

such construction and so installed and maintained as to prevent the danger of their being a source of

ignition;

(b)

Effective measures shall be adopted for prevention of accumulation of static charges to a

dangerous extent;

(c)

no person shall wear or be allowed to wear any foot wear having iron or steel nails or any

360

DELHI GAZETTE : EXTRAORDINARY

PART IV]

other exposed ferrous materials which is likely to cause sparks by friction;

(d)

Smoking, lighting or carrying of matches, lighters or smoking materials shall be

prohibited;

(e)

Transmission belts with iron fasteners shall not be used; and

(f)

all other precautions, as are reasonably practicable, shall be taken to prevent initiation of

ignition from all other possible sources such as open flames, frictional sparks, overheated surfaces of

machinery or plant, chemical or physical- chemical reaction and radiant heat.

7.

Prohibition of smoking – No person shall smoke in any place where highly flammable

liquid or flammable compressed gas is present in circumstances that smoking would give a risk

of life. The occupier shall take all practicable measures to ensure compliance with this requirement

including display of a bold notice indicating prohibition of smoking at every place where this

requirement applies.

8.

Fire Fighting – In every factory where highly flammable liquid or flammable compressed

gas is manufactured, stored, handled or used, appropriate and adequate means of fighting a fire

shall be provided. The adequacy and suitability of such means which expression includes the fixed

and portable fire extinguishing systems, extinguishing material, procedures and the process of

firefighting, shall be to the standards and levels prescribed by the Indian Standards applicable,

and in any case not inferior to the standards prescribed by Central Government under the Code.

9.

Exemptions – If in respect of any factory, the Chief Inspector-cum- Facilitator is

satisfied that owing to the exceptional circumstances or in frequency of the processes or for any

other reason, all or any of the provisions of this schedule is not necessary for the protection of the

workers in the factory, the Chief Inspector-cum-Facilitator may be a certificate in writing which

he may in his discretion revoke at any time, exempt such factory from all or any of such provisions

subject to such conditions, if any, as he may specify therein.

SCHEDULE – XXVII

OPERATIONS IN FOUNDRIES

1.

Application – Provisions of this schedule shall apply to all parts of factories where any of

the following operations or processes are carried on:

(a)

the production of iron castings or, as the case may be, steel castings by casting in molds

made of sand, loam, moulding composition or other mixture of materials, or by shall moulding, or

by centrifugal casting and any process incidental to such production;

(b)

the production of non-ferrous castings by casting metal in molds made of sand, loam , metal,

moulding composition or other material or mixture of materials, or by shall moldings, die-casting

(including pressure die casting), centrifugal casting or continuous casting and any process

incidental to such production; and

(c)

the melting and casting of non-ferrous metal for the production of ingots, billets, slabs or

other similar products, and the stripping thereof;

[PART IV

DELHI GAZETTE : EXTRAORDINARY

361

But shall not apply with respect to –

(a)

Any process with respect to the smelting and manufacture of lead and the Electric

Accumulators;

(b)

Any process for the purpose of a printing works; or

(c)

Any smelting process in which metal is obtained by a reducing operation or any process

incidental to such operation; or

(d)

The production of steel in the form of ingots; or

(e)

Any process in the course of the manufacture of solder or any process incidental to such

manufacture; or

(f)

the smelting and casting of lead or any lead-based alloy for the production of ingots, billets,

slabs or other similar products or the stripping thereof, or any process incidental to such melting,

casting or stripping.

2.

Definition – For the purpose of this schedule –

(A)

―approved respirator‖ means a respirator of a type approved by the Chief Inspector-cum-

Facilitator;

(B)

―cupola of furnace‖ includes a receiver associated therewith;

(C)

―dressing or fettling operations‖ includes stripping and other removal of adherent sand,

cores, runners, risers, flash and other surplus metal from a casting and the production of

reasonably clean and smooth surface, but does not include (a) the removal of metal from a casting

when performed incidentally in connection with the machining or assembling of castings after

they have been dressed or fettled, or (b) any operation which is knock-out operation within the

meaning of this schedule;

(D)

―foundry‖ means those parts of a factory in which the production of iron or steel or non-

ferrous castings (not being the production of pig iron or the production of steel in the form of

ingots) is carried on by casting in molds made of sand, loam, moulding composition or other

mixture of materials, or by shell moulding or by centrifugal casting in metal molds lined with sand,

or die casting including pressure die casting, together with any part of the factory in which any of

the following processes are carried on as incidental processes in connection with and in course of,

such production, namely, the preparation and preparation of molds and cores, knock out operations

and dressing or fettling operations;

(E)

―knock-out operations‖ means all methods of removing castings from molds and the following

operations, when done in connection therewith, namely, stripping, coring-out and the removal of

runners and risers;

(F)

―pouring aisle‖ means an aisle leading from a main gangway or directly from a cupola or

furnace to where metal is poured into molds.

362

DELHI GAZETTE : EXTRAORDINARY

PART IV]

3.

Prohibition of use of certain materials as parting materials –

(1)

A material shall not be used as a parting material if it is a material containing compounds of

silicon calculated as silica to the extent more than 5 percent by weight of the dry material :

Provided that this prohibition shall not prevent the following being used as a parting

material if the material does not contain an admixture of any other silica –

(a)

Zirconium silicate (Zircon)

(b)

Calcined China clay

(c)

Calcined aluminous fireclay

(d)

Sillimanite

(e)

Calcined or fused alumina

(f)

Olivine

(g)

Natural sand

(2)

Dust or other matter deposited from a fettling or blasting process shall not be used as a

parting material or as a constituent in a parting material.

4.

Arrangement and storage – For the purposes of promoting safety and cleanliness in

workrooms the following requirements shall be observed:-

(a)

moulding boxes, loam plates, ladles, patterns, pattern plates, frames, boards, box weights,

and other heavy articles shall be so arranged and placed as to enable work to be carried on

without unnecessary risk;

(b)

Suitable and conveniently accessible racks, bins, or other receptacles shall be provided and

used for the storage of other gear and tools;

(c)

Where there is bulk storage of sand, fuel, metal scrap or other materials or residues,

suitable bins, bunkers or other receptacles shall be provided for the purpose of such storage.

5.

Construction of floors –

(1)

Floors of indoor workplaces in which the processes are carried on, other than parts which

are of sand, shall have been surface of hard material.

(2)

No part of the floor of any such indoor workplace shall be of sand except where this is

necessary by reason of the work done.

(3)

All parts of the surface of the floor of any such indoor workplace which are of sand shall,

so far as practicable, be maintained in an even and firm condition.

6.

Cleanliness of indoor workplaces.-

(1)

All accessible parts of the walls of every indoor workplace in which the processes are

carried on and of everything affixed to those wall shall be effectively cleaned by a suitable

method to a height of not less than 4.2 meters from the floor at least once in every period of

fourteen months. A record of the carrying out of every such effective cleaning in pursuance of this

[PART IV

DELHI GAZETTE : EXTRAORDINARY

363

paragraph including the date (which shall be not less than five months nor more than nine months

after the last immediately preceding washing, cleaning or other treatment.)

(2)

Effective cleaning by a suitable method shall be carried out at least once every working

day of all accessible parts of the floor of every indoor workplace in which the processes are carried

on, other than parts which are of sand; and the parts which are of sand shall keep in good order.

7.

Manual operations involving molten metal –

(1)

There shall be provided and properly maintained for all persons employed on manual

operations involving molten metal with which they are liable to be splashed, a working space for

that operation –

(a)

Which is adequate for the safe performance of the work and

(b)

Which, so far as reasonably practicable, is kept free from obstruction

(2)

Any operation involving the carrying by hand of a container holding molten metal shall be

performed on a floor all parts of which were any person walks while engaged in the operation shall

be on the same level:

Provided that, where necessary to enable the operation to be performed without undue

risk, nothing in this paragraph shall prevent the occasional or exceptional use of a working space

on a different level from the floor, being a space provided with a safe means of access from the

floor for any person while engaged in the operation.

8.

Gangways and pouring aisles –

(1)

In every workroom to which this paragraph applies constructed, reconstructed or

converted for use as such after the making of this Schedule and, so far as reasonably practicable,

in every other workroom to which this Paragraph applies, sufficient and clearly defined main

gangway shall be provided and properly maintained which –

(a)

shall have an even surface of hard material and shall, in particular, not be of sand or have on

them more sand than is necessary to avoid risk of flying metal from accidental spillage;

(b)

shall be kept, so far as reasonably practicable, free from obstruction;

(c)

if not used for carrying molten metal, shall be at least 920 millimeter in width;

(d)

if used for carrying molten metal shall be –

(i)

Where truck ladles are used exclusively, at least 600 millimeters wider than the overall

width of the ladle;

(ii)

Where hand shanks are carried by not more than two men, at least 920 millimeters in

width;

(iii)

Where hand shanks are carried by more than two men, at least 1.2matters in width; and

(iv)

Where used for simultaneous travel in both directions by men carrying hand shanks, at

364

DELHI GAZETTE : EXTRAORDINARY

PART IV]

least 1.8 meters in width.

(2)

In workroom to which this Paragraph applies constructed, reconstructed or converted for

use as such after the making of this Schedule, sufficient and clearly defined pouring aisles shall

be provided and properly maintained which –

(a)

shall have an even surface of hard material and shall, in particular, not be sand or have on

them more sand than is necessary to avoid risk of flying metal from accidental spillage;

(b)

Shall be kept so far as reasonably practicable free from obstruction;

(c)

if molten metal is carried in hand ladles or bulk ladles by not more than two men per ladle,

shall be at least 460 millimeters wide, but where any molds alongside the aisle are more than 510

millimeters above the floor of the aisle, the aisle shall be not less than 600 millimeters wide;

(d)

if molten metal is carried in hand ladles or bull ladles by more than two men per ladle, shall

be at least 760 millimeters wide;

(e)

if molten metal is carried in crane, trolley or truck ladles, shall be of a width adequate for the

safe performance of the work.

(3)

Requirements of sub-paragraph (1) and (2) shall not apply to any workroom or part of a

workroom if, by reason of the nature of the work done therein, the floor of that workroom or, as

the case may be, that part of a workroom has to be of sand.

(4)

In this paragraph ―workroom to which this paragraph applies‖ means a part of a ferrous

or non-ferrous foundry in which molten metal is transported or used, and a workroom to which

this paragraph applies shall be deemed for the purposes of this paragraph to have been

constructed, reconstructed or converted for use as such after the making of this schedule if the

construction, reconstruction or conversion thereof was begun after the making of this schedule.

9.

Work near cupolas and furnaces – No person shall carry out any work within a

distance of 4 meters from a vertical line passing through the delivery end of any spout of a cupola

or furnace, being a spout used for delivering molten metal, or within a distance of 2.4 meters

from a vertical line passing through the nearest part of any ladle which is in position at the end of

such a spout, except, in either case, where it is necessary for the proper use of maintenance of a

cupola or furnace that work should be carried out within that distance of that work is being carried

out at such a time and under such conditions that there is no danger to the person carrying it out

from molten metal which is being obtained from the cupola or furnace or is in a ladle in position

at the end of the spout.

10.

Dust and fumes.-

(1)

Open coal, coke or wood fires shall not be used for heating or drying ladles inside a

workroom unless adequate measures are taken to prevent, so far as practicable, fumes or other

impurities from entering into or remaining in the atmosphere of the workroom.

(2)

No open coal, coke or wood fires shall be used for drying molds except in circumstances in

[PART IV

DELHI GAZETTE : EXTRAORDINARY

365

which the use of such fires is unavoidable.

(3)

Mold stoves, core stoves and annealing furnaces shall be so designed constructed,

maintained and worked as to prevent, so far as practicable, offensive or injurious fumes from

entering into any workroom during any period when a person is employed therein.

(4)

All knock-out operations shall be carried out –

(a)

in a separate part of foundry suitably partitioned off, being a room or part in which, so far as

reasonably practicable, effective and suitable local exhaust ventilation and a high standard of

general ventilation are provided; or

(b)

in an area of the foundry in which, so far as reasonably practicable, effective and suitable

local exhaust ventilation is provided, or where compliance with this requirement is not reasonably

practicable, a high standard of general ventilation is provided.

(5)

All dressing or fettling operations shall be carried out –

(a)

In a separate room or in a separate part of foundry suitably partitioned off; or

(b)

In an area of the foundry set apart for the purpose; and shall, so far as reasonably

practicable, be carried out with effective and suitable local exhaust ventilation or other equally

effective means of suppressing dust, operating as near as possible to the point of origin of the dust.

11.

Maintenance and examination of exhaust plant –

(1)

All ventilation plant used for the purpose of extracting, suppressing or controlling dust or

fumes shall be properly maintained.

(2)

All ventilating plant used for the purpose of extracting, suppressing or controlling dust or

fumes shall be examined and inspected once every week by a responsible person. It shall be

thoroughly examined and tested by a competent person at least once in every such examination and

test shall be entered in an register in Form-25 which shall be available for inspection by an

Inspector- cum-Facilitator. Any defect found on any such examination and carrying out the

examination and test to the occupier of the factory.

12.

Protective equipment –

(1)

The occupier shall provide and maintain protective equipment specified for the protection of

workers,

(a)

suitable gloves to other protection for the hands for workers engaged in handling any hot

material likely to cause damage to the hands by burn, scald, or scar, or in handling pig iron, rough

castings or other articles likely to cause damage to the hands by cut or abrasion;

(b)

approved respirators for workers carrying out any operations creating a have dust

concentration which cannot be dispelled quickly and effectively by the existing ventilation

arrangements.

366

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(2)

No respirator provided for the purposes of clause 1(b) has been worn by a person shall be

worn by another person if it has not since been thoroughly cleaned and disinfected.

(3)

Persons who for any of their time –

(a)

work at a spout of or attend to, a cupola or furnace in such circumstances that material

there from may come into contact with the body, being material at such a temperature that its

contact with the body would cause a burn; or

(b)

Are engaged in, or in assisting with, the pouring of molten metal; or

(c)

carry by hand or move by manual power any ladle or mold containing molten metal; or

(d)

are engaged in knocking-out operations involving material at such a temperature that its

contact with the body would cause a burn;

Shall be provided with suitable footwear and gaiters which worn by them prevent, so far as

reasonably practicable, risk of burns to his feet and ankles.

(4)

Where appropriate, suitable screens shall be provided for protection against flying materials

(including splashes of molten metal and sparks and chips thrown off in the course of any process).

(5)

The occupier shall provide and maintain suitable accommodation for the storage and

make adequate arrangements for cleaning and maintaining of the protective equipment supplied in

pursuance of this paragraph.

(6)

Every person shall make full and proper use of the equipment provided for his protection in

pursuance of sub-paragraph (1) and (4) and shall without delay report to the occupier, manager,

or other appropriate person any defect in, or less of, the same.

13.

Washing and bathing facilities –

(1)

There shall be provided and maintained in clean state and good repair for the use of all

workers employed in the foundry –

(a)

A wash place under cover with either –

(i)

a trough with impervious surface fitted with a waste pipe without plug, and of sufficient

length to allow at least 60 centimeters for every 10 such persons employed at any one time and

having a constant supply of clean water from taps or jets above the trough at intervals of not

more than 60 centimeters or

(ii)

at least one tap or stand pipe for every 10 such persons employed at any one time, and

having a constant supply of clean water, the tap or stand pipe being spaced not less than 1.2

meters apart; and

(b)

Not less than one half of the total number of washing places provided under clause (a)

shall be in form of bath rooms.

(c)

A sufficient supply of clean towels made of suitable material changed daily, with sufficient

supply of nail brushes and soap.

(2)

The facilities provided for the purposes of sub-paragraph (1) shall be placed in charge of a

[PART IV

DELHI GAZETTE : EXTRAORDINARY

367

responsible person or persons and maintained in a clean and orderly condition.

14.

Disposal of dross and skimming – Dross and skimming removed from molten metal or

taken from a furnace shall be placed forthwith in suitable receptacles.

15.

Disposal of waste – Appropriate measures shall be taken for the disposal of all waste

products from shell moulding (including waste burnt sand) as soon as reasonably practicable after

the castings have been knocked-out.

16.

Material and equipment left out of doors – All material and equipment left out of doors

(including material, and equipment so left only temporarily or occasionally) shall be so arranged

and placed as to avoid unnecessary risk. There shall be safe means of access to all such material

and equipment and, so far as reasonably practicable, such access shall be by roadways or

pathways which shall be properly maintained. Such roadways or pathways shall have a firm and

even surface and shall, so far as reasonably practicable be kept free from obstruction.

17.

Medical examination by medical officer – (1) every worker employed in the processes

specified in paragraph 1 shall be examined by a Medical officer within15 days of his first

employment. Such examinations shall include skin test for dermatitis and no worker shall be

allowed to work after 15 days of his first employment in the factory unless certified fit for such

employment by the Medical officer.

(2)

Every worker employed in a manganese process shall be re-examined by a Medical officer

at least once in every 12 months and such examination shall, wherever the Medical officer

considers appropriate, include all the tests in subparagraph(1).

(3)

The Medical officer after examining a worker, shall issue a Certificate of Fitness in Form-

24. The record of examination and re-examinations carried out shall be entered in the Certificate

and the Certificate shall be kept in the custody of the occupier of the factory. The record of each

examination carried out under sub-paragraph (1)and (2) including the nature and the results of

these test, shall also be entered by the Medical officer in a health register in Form-05.

(4)

The Certificate of Fitness and the health register shall be kept readily available for

inspection by the Inspector-cum-Facilitator.

(5)

If at any time the Medical officer is of the opinion that a worker is no longer fit for

employment in the said processes on the ground that continuance therein would involve special

danger to the health of the worker, he shall make a record of his findings in the said certificate and

the health register. The entry of his findings in those documents should also include the period for

which he considers that the said person is unfit to work in the said process shall be provided with

alternate placement facilities unless he is fully incapacitated in the opinion of the Medical officer ,

in which case the person affected shall be suitably rehabilitated.

(6)

No person who has been found unfit to work as said in sub-paragraph (5) shall be re-

employed or permitted to work in the said processes unless the Medical officer, after further

368

DELHI GAZETTE : EXTRAORDINARY

PART IV]

examination, again certifies him fit for employment in those processes.

19. Exemptions – If in respect of any factory, the Chief Inspector-cum- Facilitator is satisfied that

owing to the exceptional circumstances or infrequency of the processes or for any other reason, all

or any of the provisions of this schedule is not necessary for the protection of the workers in the

factory, the Chief Inspector-cum-Facilitator may be a certificate in writing which he may in his

discretion revoke at any time, exempt such factory from all or any of such provisions subject to

such conditions, if any, as he may specify therein.

SCHEDULE – XXVIII

TEXTILE MACHINERY EXCEPT MACHINERY USE IN JUTE MILLS

1.

Application: - This Schedule shall apply to the machinery in factories engaged in

manufacturing or processing of textiles other than jute textiles excluding the machinery in

factories engaged exclusively in the manufacture of synthetic fibers.

2.

Definitions;-For the purposes of this Schedule.

(a)

―Calendar‖ means a set of heavy roller mounted on vertical side frames and arranged to

pass cloth between them which may have two to ten rollers or bowls some of which may be

heated:

(b)

―Card‖ means a machine consisting of cylinders various sizes and includes flats. Covered

with card clothing and set in relation to each so that fibers in ; staple form may be Separated into

individual relationship

(c)

―Card clothing‖ means the material with which the surfaces of the cylinder, Doffer flats, etc.

Of a card are covered and consists of a thick foundation material made of either textile fabrics,

through which many fine closely spaced

specially bent wires or mounted saw-toothed wires are passed;

(d)

―Comber‖ means a machine for combing fibers of cotton. Wool etc. The essential parts

whereof are device for feeding forward a fringe of fibers at regular intervals and an arrangement

of combs or pins, which at the right time, pass through the fringe and by which tangled fibers.

Short fibers, and nips are removed and the long fibers are laid parallel;

(e)

―Combing machinery‖ means a general classification of machinery, including combers, silver

lap machines. Ribbon lap machines and gill boxes, but excluding cards;

(f)

―Continuous bleaching range‖ means a machine used for bleaching of cloth in rope or open-

width form;

Explanation: (1) The cloth after wetting out, passes through a squeeze roll into a saturator,

containing a solution of caustic soda and then to an enclosed J. Box. A V shaped arrangement is

attached to the front part of J. Box uniform and rapid saturation of the cloth, with steam before it is

packed down in the J. Box; the cloth, in a single strand rope form passes over a guide roll down

the first arm of the ―V‖ at the upper end of the second arm so that the cloth is rapidly saturated

[PART IV

DELHI GAZETTE : EXTRAORDINARY

369

with steam at this point; the J. Box capacity is such that cloth will remain hot for a sufficient time

to complete the scouring action; it then passes through a series of washers with a squeeze roll in

between; the cloth then passes through a second set of saturator, J-Box and washer, where it is

treated with the peroxide solution;

Explanation:- 2) by slight modification of the form of the unit, the same process as is explained in

Explanation (1), can be applied to open-width cloth;

(g)

―embossing calendar‖ means a calendar with two or more rolls, one of which is engaged

for producing figure effects of various kinds on a fabric;

(h)

―garnet machine‖ means any number of types of machines for opening hard twisted waste

of wool, cotton, silk, etc., essentially consisting of a locker- in-one or more cylinders each having a

complement worker and stringer rolls, and a fancy roll and doffer.

Explanation: - The action of such machines is somewhat like that of a wool card, but it is much

more severe in that the various rolls are covered with garnet wire instead of card clothing;

(i)

―gill box‖ means a machine used in the worsted system of manufacturing yarns which

functions to arrange it in a parallel order and essentially, it consists of a pair of feed rolls and a

series of follower where the followers move at a faster surface speed and perform as combine

action;

(j)

―in-running rolls‖ means any pair of rolls or drums between which there is a ‗nip‘;

(k)

―Inter-locking arrangement‖ means a device that prevents the setting in motion of a

dangerous part of a machine or the machine itself while the guard, cover or door provided to safe-

guard against danger is open or un-locked, and which will also hold the guard, cover or door

closed and locked- while the machine or the dangerous part thereof is in motion;

(I)

―Kier‖ means large metal vat, usually a pressure type in which fabrics may be boiled out,

bleached etc.

(m)

―loom‖ means a machine for effecting the interlocking of two series of yarns crossing one

another at right angles by which the warp yarns are wound on a warp beam and pass through

headless and reads and the filling is shot across in a shuttle and settled in place by read and slay,

and the fabric is wound on a cloth beam;

(n)

―mule‖ means a type of spinning frame having a head stock and a carriage as its two main

sections, the head stock is stationery and the carriage is movable and its carries the spindles which

draft and spin the roving into yarn and extends over the whole of the machine, moves slowly toward

and away from the head stock during the spinning operation;

(0) ―mercerizing range‖ means a 3-bowl mangle, a tenter frame, and a number of boxes for washing

and scouring, the whole set up where of is in a straight line and all parts operate continuously;

Note :-The combination is used to saturate the cloth with sodium hydroxide, stretch it while

370

DELHI GAZETTE : EXTRAORDINARY

PART IV]

saturated and washing out most of the caustic before releasing tension;

(p)

―Nip‖ means the danger zone between two rolls or drums, which by virtue of their

positioning and movement create a nipping hazard;

(q)

―Openers and pickers‖ mean a general classification of machinery, which includes breaker

pickers, intermediate pickers, finisher pickers, single process

pickers, willow machines, card and picker waste cleaners, thread extractors shredding machines,

roving waste openers, shoddy pickers, bale breakers, feeders, vertical openers, lattice cleaners

horizontal cleaners and any similar machinery equipped with either cylinders, screen section

calendar section, rollers or beaters used for the preparation of stock for further processing;

(r)

―paddler‖ means a trough for a solution and two or more squeeze rolls between which

cloth passes after being passed through a mordent or dye bath;

(s)

―Plating machine‖ means a machine used to lay cloth into folds of regular length for

convenience of subsequent process or use;

(t)

―ribbon lapper‖ means a machine or a part of a machine used to prepare laps for feeding a

cotton comb the purpose of which is to provide a uniform lap in which the fibers have been

straightened as much as possible;

(u)

―rotary staple cutter‖ means a machine consisting of one or more rotary blades used for

the purpose of cutting textile fibers into staple lengths;

(v)

―roller printing machine‖ means a machine used for printing fabrics and consisting of a

large central cylinder, or pressure bowl around the lower part of the perimeter of which is placed a

series of engraved color rollers (each having a color trough), a furnisher roller, doctor blades, etc.;

(w)

―silver lapper‖ means a machine or a part of a machine in which a number of parallel card

silvers are drafted slightly, laid side by side in a compact sheet and wound into a cylindrical

package;

(x)

―starch mangle‖ means a mangle which is use specifically for starching cotton goods, and

generally consists of two large rolls and a shallow open vat with several immersion rolls;

(y)

―sulfurizing machine‖ means a machine consisting of a large steam-heated cylinder and

endless, thick woolen felt blanket which is in close contact with the cylinder for most of its

perimeter and an electrically heated shoe which presses the cloth against the blanket while the

latter is in a stretched condition as it curves around feed-in roll;

(z)

―shearing machine‖ means a machine used for shearing cloth in which cutting action is

provided by a number of steel blades spirally mounted on a roller which rotates in close contact

with a fixed edge blade.

(aa) ―singeing machine‖ means a machine which comprises of a heated roller

a plate, or an open gas flame by which the cloth or yarn is rapidly passed over the roller or the plate

or through the open gas flame to remove fuzz of hairiness by burning;

[PART IV

DELHI GAZETTE : EXTRAORDINARY

371

(ab) ―slasher‖ means a machine used for applying a size mixture to warp yarns which essentially

consists of a stand for holding section beams a size box, one or more cylindrical dryers or an

enclosed hot air dryer, and a beaming end for winding the yarn on the loom beams;

(ac) ―tented frame‖ means a machine for drying cloth under tension which essentially consists of

a pair of endless travelling chains fitted with clips of fine pins and carried on tracks and the cloth is

firmly held at the selvages by the two chains which diverge as they move forward so that the cloth

is brought to the desired width;

(ad) ―warper‖ means a machine for preparing and arranging the yarn intended for the warp of

fabric, specifically a beam warper; and

(ae) ―Water mangle‖ means a calendar having two or more rolls used for squeezing water form

fabrics before drying or for the finishing of various fabrics.

3.

General safety requirements;-

(1)

Every textile machine shall be provided with individual mechanical or electrical means

for starting and stopping such machines and the belt shifter on machines driven by belts and

shafting should be provided with a belt shifter lock or an equivalent positive locking device.

(2)

Stopping and starting handles or other controls shall be of such design and so positioned as

to prevent the operator‘s hand or fingers from striking against any moving part or any other part of

the machine.

(3)

All belts, pulleys, gears, chains, sprockets wheel and other dangerous moving parts of

machinery which either form part of the machinery or are used in association with it, shall be

securely guarded.

4.

Openers and pickers .- (1) In all operating or picker machinery;-

(i)

Beaters and other dangerous parts shall be securely fenced by guards so as to prevent

contact with them; and

(ii)

Guards and doors or cover of openings giving access to any dangerous part of the

machinery shall be provided with inter-locking arrangement:

Provided that in the case of doors or covers of openings giving

access to any dangerous part, other than beater covers, instead of the inter, locking arrangement.

Such openings may be so fenced by guards which prevent access to any such dangerous part and

which is either kept positively locked in position or fixed in such a manner that it cannot be

removed without the use of hand tools.

(2)

The feed rolls on all opening and picking machinery shall be covered with a guard designed

to prevent the Operator from reaching the nip while the machinery is in operation.

(3)

The lap forming rollers shall be fitted with a guard or cover which shall prevent access to

the nip at the intake of the lap roller and fluted roller as long as the weighted rack is down and the

guard or cover shall be so locked that it cannot be raised until the machine is stopped, and

372

DELHI GAZETTE : EXTRAORDINARY

PART IV]

machine cannot be started until the Cover of guard is closed:

Provided that the foregoing provision shall not apply to the machines equipped with

automatic lap forming devices:

Provided further that any such machine equipped with automatic lap forming device

shall not be used unless the automatic lap forming device is in efficient working order.

5.

Cotton Cards.-(1) all cylinder doors shall be secured by an interlocking arrangement

which shall prevent the door being opened until the cylinder has ceased to revolve and shall render

it impossible to restart the machine until the door has been closed:

Provided that the latter requirement in respect of the automatic locking device shall not

apply while stripping or grinding operations are carried out:

Provided further that stripping or grinding operation shall be carried out only by specially

trained adult workers wearing tight ―fitting clothing.

The licker-in shall be guarded so as to prevent access to the dangerous parts.

(2)

Every card shall be equipped with an arrangement that would enable the card cylinder to

be driven by power during stripping or grinding operations without having to either shift the main

belt to the fast pulley of the machine or

dismantle the interlocking mechanism and such an arrangement shall be used only for strip or

grinding operations.

6.

Garnett Machines. (1) Garnett licker-ins shall be enclosed and the garnet fancy rolls shall

be enclosed by guards and shall be installed in a way that keeps work rolls reasonably accessible

for removal or adjustment.

(2) The underside of the garnet shall be guarded by a screen mess or other form of enclosures to

prevent access.

7.

Gill boxes.-(1) The feed and shall be guarded so as to prevent fingers being caught in the

pins of the intersecting fillers.

(2) All nips of in-running rolls shall be guarded by Suitable nip guards conforming to the following

specifications.

Any opening which the guard may permit when fitted in position shall be so restricted with

respect to the distance of the opening from any nip point through that opening from any nip point

through that the maximum width of the opening shall not exceed the following :-

Distance of opening from nip point Maximum width of opening 0 to 38 mm

6 mm

39 to 63 mm

10 mm

64 to 88 mm

13 mm

89 to 140 mm

15 mm

[PART IV

DELHI GAZETTE : EXTRAORDINARY

373

141 to 165 mm

19 mm

166 to 190 mm

22 mm

191 to 215 mm

32 mm

8.

Silver aid ribbon lappers (cotton). – The cylinder drums and the laps pool shall be

provided with a guard to prevent access to the nip between the in- running rolls.

9.

Speed frame Jack Box wheels at the head stock shall band guard shall have interlocking

arrangement.

10.

Spinning Mules.-Wheels on spinning mule carriages shall be provided with substantial

wheel guards, extending to within 6 mm of the rails.

11.

Warpers.- Swiveled double-bar gates shall be installed on all warpers operating in

excess of 410 meters minimum and shall have interlocking arrangements, except for the purpose

of inching or jogging.

Provided that top and bottom bars of gates shall be at least 1.05 and 0.53 meters high from the floor

or working plate form, and gate shall be locked 38 mm from vertical tenement to the bean head.

12 Slashers: - (1) Cylinder dryers:- a) All open nips of in running rolls shall be guarded by nip

guards conforming to the requirements in clause 7.

b)

When slashers are operated by control levers, these levers shall be connected to a horizontal

bar or treadle located not more than 170mm above the floor to control the operation from any

point.

c)

Slashers operated by such button control shall have stop and start buttons located at each

end of the machine, and additional buttons located on both sides of the machine at the size box

and the delivery end and if calendar rolls are used, additional buttons shall be provided at both

sides of machines at points near the nips, except when slashers are equipped with an enclosed

dryer as in such clause (b).

2 Enclosed hot air dryer –

(a)

All open nips of the top squeezing rollers shall be guarded by nip guards conforming to the

requirement specified in sub-clause (2) of clause 7.

(b)

When slashers are operated by control layers, these levers shall be connected to a

horizontal bar or treadle located not more than 170 cm. Above the floor to control the operation

from any point.

(c)

Slashers operated by push-button control shall have stop and start buttons located at each

end of the machine and additional stop and start buttons located on both sides of the machine at

intervals spaced not more than 1.83 meters on centers.

13

Looms –

(a)

Each loom shall be equipped with suitable guards designed to minimize the danger from

374

DELHI GAZETTE : EXTRAORDINARY

PART IV]

flying shuttles.

(b)

Beam weights for tension in beam shall be of such construction so as prevent it from falling

during its adjustment.

14

Valves of Kiers, tanks, and other containers. –

(a)

Each valve controlling the flow of steam injurious gases or liquids into a kier or any other

tank or container into which a person is likely to enter in connection with a process, operation,

maintenance or for any other purpose, shall be provided with a suitable lock the valve securely in

the closed position and retain the key with him before entering the kier tank or container.

(b)

Wherever boiling tanks, caustic tanks and any other containers from which liquids, which

are hot, corrosive or toxic, may overflow or splash, are so located that the operator cannot see the

contents from the floor or working areas, emergency shut off valves which can be controlled from

a point not subject to danger of splash shall be provided to prevent danger.

15.

Shearing machines: - All revolving blades on shearing machines shall be guarded so that

the opening between the cloth surface and the bottom of the guard will not exceed 10 mm.

16.

Continuous bleaching range (cotton and rayon):- The nip of all in running rolls on

open-width bleaching machine rolls shall be protected with a guard to prevent the worker from

being caught at the nip and the guard shall extend across the entire length of the nip.

17

Mercerizing range (piece goods) :-

(1)

A stopping device shall be provided at each end of the machine.

(2)

A guard shall be provided at each end of the frame between the in running chain and the

clip opener.

(3)

A nip guard shall be provided for the in-running rolls of the mangle and washers and the

guard shall conform to the requirements specified in sub- clause (2) of clause 7.

18

Tented frames:-

(1)

A stopping device shall be provided at each end of the machine.

(2)

A guard shall be provided at each end of the machine frame at the in running chain

and clip opener.

19

Paddlers. –

(1)

Suitable nip guards conforming to the requirements specified in sub clause (2) of clause 7

shall be provided to all dangerous in-running rolls.

20

Centrifugal extractors.-

(1)

Each extractor shall be provided with a guard for the basket, and the guard shall have

interlocking arrangement.

(2)

Each extractor shall be equipped with a mechanically or electrically operated brake to

quickly stop the basket when the power driving the basket is shut off.

[PART IV

DELHI GAZETTE : EXTRAORDINARY

375

21. Squeezer of wringer extractor, water mangle, starch mangle, back washer (worsted

yarn) crabbing machines and decanting machine: - All in-running rolls shall be guarded with nip

guards conforming to the requirements specified in sub-clause (2) of clause 7.

22

Sulfurizing and palmer machine: - (i) Nip guards shall be provided on all accessible in-

running rolls and these shall conform to the requirements specified in sub-clause (2) of clause 7.

(ii)

Access from the sides to the nips of running rolls should be fenced by suitable side

guards.

(iii)

A safety trip rod, cable or wire center cord shall be provided across the front and back of

all palmer cylinders extending the length of the face of the cylinder, which operate readily

whether pushed or pulled and the safety trip shall not be more than 170 cm. Above the level at

which the operation stands and shall be readily accessible.

23

Rope washers:- (1) Splash guards shall be installed in all rope washers unless the machine

is so designed as to prevent the water or liquid from splashing the operator, the floor or working

surface.

(2) A safety trip rod, cable or wire center cord shall be provided across the front and back of all

rope was hers extending the length of the face of the washer which shall operate readily whether

pushed or pulled and the safety trip shall be not more than 170 cm. Above the level on which the

operator stands and shall be readily accessible.

24

Laundry washer tumbler or shaker:

(1)

Each drying tumbler, each double cylinder shaker or clothes tumbler, and each washing

machine shall be equipped with an interlocking arrangement which will prevent the power

operation of the inside cylinder when the outer door on the case or shall is open, and which will

also prevent the outer door in the case or shall from being opened without shutting off the power

and the cylinder coming to a stop but which should not prevent the movement of the inner-

cylinder by means of a hand operated mechanism or an inching device.

(2)

Each closed barrel shall also be equipped with adequate means for holding open the doors

or covers of the inner and outer cylinders, of shells while it is being loaded or unloaded.

25.

Printing machine (roller type) –

(1)

All in-running rolls shall be guarded by nip guards conforming to the requirements

specified in sub-clause(2) of clause 7

(2)

The engraved roller gears and the large crown wheel shall be guarded.

26.

Calendars –The Nip at the in-running side of the rolls shall be provided with a guard

extending across the entire length of the nip and arranged to prevent the fingers of the workers

from being pulled in between the rolls or between the guard and the rolls, and so contracted that

the cloth can be fed into the rolls safely.

376

DELHI GAZETTE : EXTRAORDINARY

PART IV]

27.

Rotary staple cutters: - The cutter shall be protected by a guard to prevent hands

reaching the cutting zone.

28.

Plating machines.- Access to the trap between the knife and card bar shall be prevented

by a guard.

29.

Hand baling machine. –An angle iron handle-stop guard shall be installed at right angle to

the frame of the machine, the stop guard of which shall be so designed and so located that it will

prevent the handle from travelling beyond the vertical position should be handle slips from the

operator‘s hand when the pawl has been released from the teeth of the take-up gear.

30 Flat-Work ironer.- Each flat-work or collar ironer shall be equipped with a safety bar or other

guard across the entire from of the feed or first pressure rolls, so arranged that the striking of the

bar or guard by the hand of the operator or other person will stop the machine. The guard shall be

such that the operator or other person cannot reach into the rolls without removing the guard. This

may be either a vertical guard on all sides or a complete cover. If a vertical guard is used, the

distance from the floor or working platform to the top of guard shall not be less than 1.83 meters.

31. Medical examination and records:-

(1)

Every worker employed on machinery to which this schedule applies shall be examined

by a medical officer within 15 days of his first employment. Such examination shall include

pulmonary test, immunoglobin test, Audiometry test etc. No worker shall be allowed to work after

15 days of his first employment in the factory unless certified fit for such employment by the

medical officer

(2)

Every worker employed in the said processes shall be re-examined by a medical officer at

least once in every twelve calendar months. Such re- examination shall, wherever the medical

officer considers appropriate, include tests as specified in sub- paragraph (1).

(3)

The medical officer after examining a worker, shall issue a Certificate of Fitness in Form-

24. The record of examination and re-examinations carried out shall be entered in the Certificate

and the Certificate shall be kept in the custody of the occupier of the factory. The record of each

examination carried out under sub paragraphs(1) and (2), including the nature and the results of the

tests, shall also be entered by the medical officer in a health register in Form- 25.

(4)

The Certificate of Fitness and the health register shall be kept readily available for

inspection by the Inspector-cum-Facilitator.

(5)

if at any time medical officer is of the opinion that a worker is no longer fit for employment

in the said process on the ground that continuance therein would involve special danger to the

health of the worker he shall make a record of his findings in the said Certificate and the health

register. The entry of his findings in these documents should also include the period for which he

considers that the said person is unfit for work in the said processes. The person so suspended

from the process shall be provided with alternate placement facilities unless he is fully incapacitated in

[PART IV

DELHI GAZETTE : EXTRAORDINARY

377

the opinion of the Medical officer, in which case the person affected shall be suitably rehabilitated.

(6)

No person who has been found unfit to work as said in sub-paragraph (5) above shall be

re-employed or permitted to work in the said processes unless the Medical officer, after further

examination, again certifies him fit for employment in those processes.

SCHEDULE – XXIX

PROCESS OF MELTING IN INDUCTION FURNACE

1.

Application:

Provisions of this schedule shall apply to all parts of factories operations where melting of metal is

done in induction furnace and other allied processes are carried on.

2.

Definitions:

(1)

―Induction Furnace‖ means furnace in which a strong magnetic field created by passing

an electric current through a coil wrapped around the furnace. The magnetic field in turn creates a

voltage across, and subsequently an electric current through, the metal to be melted.

(2)

―Coil‖ means coil of Induction Furnace

(3)

―Ladle‖ means equipment used to carry melted metal

(4)

―Mold‖ means molds made of steel, sand, loam, moulding composition or other mixture

of materials.

(5)

―Personal Protective Equipment‖ Personal Protective Equipment (PPEs) refers to

protective clothing, helmets, goggles, or other garments or equipment designed to protect the

wearer's body from injury or infection.

(6)

― Refractory‖ means lining of refractory bricks made in pit

3.

Arrangement and storage – For the purposes of promoting safety and cleanliness in

workrooms the following requirements shall be observed:-

(a)

moulding boxes, loam plates, ladles, patterns, pattern plates, frames, boards, box weights,

and other heavy articles shall be so arranged and placed as to enable work to be carried on

without unnecessary risk;

(b)

Suitable and conveniently accessible racks, bins, or other receptacles shall be provided and

used for the storage of other gear and tools;

(c)

Where there is bulk storage of sand, fuel, metal scrap or other materials or residues,

suitable bins, bunkers or other receptacles shall be provided for the purpose of such storage.

Construction, maintenance of platform and floors –

(1)

The platform of furnace should be of good construction, sound material and adequate

378

DELHI GAZETTE : EXTRAORDINARY

PART IV]

strength to withstand explosion

(2)

The platform must be of adequate size to accommodate persons working there and raw

material to be charged

(3)

The platform must be provided with at least two stairs

(4)

Floors of indoor workplaces in which the processes are carried on, other than parts which

are of sand, shall have been surface of hard material.

(5)

No part of the floor of any such indoor workplace shall be of sand except where this is

necessary by reason of the work done.

(6)

All parts of the surface of the floor of any such indoor workplace which are of sand shall,

so far as practicable, be maintained in an even and firm condition.

4.

Authorized person : – (1) No person except those authorized to work on platform or near

furnace shall be allowed on the platform or near furnace.

(2)

Person covered under exception of sub-rule (1) must be trained and provided with prescribed

personnel protective equipment.

(3)

No person shall carry out any work within a distance of 4 meters from a vertical line

passing through the delivery end of any spout of a furnace, being a spout used for delivering

molten metal, or within a distance of 2.4 meters from a vertical line passing through the nearest

part of any ladle which is in position at the end of such a spout, except, in either case, where it is

necessary for the proper use of maintenance of furnace that work should be carried out within that

distance of that work is being carried out at such a time and under such conditions that there is no

danger to the person carrying it out from molten metal which is being obtained from the cupola or

furnace or is in a ladle in position at the end of the spout.

5.

Maintenance and examination of exhaust plant –

(1)

All ventilation plant used for the purpose of extracting, suppressing or controlling dust or

fumes shall be properly maintained.

(2)

All ventilating plant used for the purpose of extracting, suppressing or controlling dust or

fumes shall be examined and inspected once every week bya responsible person. It shall be

thoroughly examined and tested by a competent person at least once in every such examination and

test shall be entered in an register in Form-49 which shall be available for inspection by an

Inspector- cum-Facilitator. Any defect found on any such examination and carrying out the

examination and test to the occupier of the factory.

6.

Ladle

(1)

Before the ladle is placed for pouring the hot liquid metal, it shall be thoroughly

inspected

(2)

Place the ladle below the spout.

[PART IV

DELHI GAZETTE : EXTRAORDINARY

379

(3)

Before pouring is started, it shall be ensured that:

(a)

Only minimum required nos. of persons shall be present.

(b)

They all shall use PPEs like face shield, flame retardant suit, anklets, goggles, hand gloves,

helmets and safety shoes.

(4)

Ladle shall be removed only after clearance from the Furnace In-charge.

(5)

Ladle shall not be transported in tilted condition.

7.

Operation and Maintenance of furnace:

(1)

The occupier shall operate the furnace as per instructions supplied by manufacturer.

(2)

The occupier shall keep the maintenance of furnace as per maintenance schedule

supplied by manufacturer.

(3)

The coil should be checked at regular intervals

(4)

The refractories shall be changed at regular interval

8.

Work Permit

The occupier shall issue work permit to the person supposed to work in confined space, at height

or on electric equipment.

9.

Washing facilities –

The occupier shall provide and maintain, in a clean state and in good repair for the use of all persons

employed a wash place under cover with sufficient supply of water and soap, towel etc.

Protective equipment –

The occupier shall provide and maintain suitable PPEs for all persons employed in process as

specified in sub-rule (2).

10.

Prohibition of employment of pregnant Woman and Adolescent – No pregnant

woman or adolescent shall be employed in any of the process covered by this schedule

11.

Medical examination by medical officer – (1) every worker employed in the processes

specified in paragraph 1 shall be examined by a Medical officer within 15 days of his first

employment. Such examinations shall include skin test, Audiometric test, Pulmonary test and no

worker shall be allowed to work after 15 days of his first employment in the factory unless certified

fit for such employment by the Medical officer.

(2)

Every worker employed in a manganese process shall be re-examined by a Medical

officer at least once in every 12 months and such examination shall, wherever the Medical officer

considers appropriate, include all the tests in subparagraph(1).

(3)

The Medical officer after examining a worker, shall issue a Certificate of Fitness in Form-

380

DELHI GAZETTE : EXTRAORDINARY

PART IV]

24. The record of examination and re-examinations carried out shall be entered in the Certificate

and the Certificate shall be kept in the custody of the occupier of the factory. The record of each

examination carried out under sub-paragraph (1)and (2) including the nature and the results of

these test, shall also be entered by the Medical officer in a health register in Form-05.

(4)

The Certificate of Fitness and the health register shall be kept readily available for

inspection by the Inspector-cum-Facilitator.

(5)

If at any time the Medical officer is of the opinion that a worker is no longer fit for

employment in the said processes on the ground that continuance therein would involve special

danger to the health of the worker, he shall make a record of his findings in the said certificate and

the health register. The entry of his findings in those documents should also include the period for

which he considers that the said person is unfit to work in the said process shall be provided with

alternate placement facilities unless he is fully incapacitated in the opinion of the Medical officer ,

in which case the person affected shall be suitably rehabilitated.

(6)

No person who has been found unfit to work as said in sub-paragraph (5) shall be re-

employed or permitted to work in the said processes unless the Medical officer, after further

examination, again certifies him fit for employment in those processes.

12.

Exemptions – If in respect of any factory, the Chief Inspector-cum- Facilitator is satisfied

that owing to the exceptional circumstances or infrequency of the processes or for any other reason,

all or any of the provisions of this schedule is not necessary for the protection of the workers in

the factory, the Chief Inspector-cum-Facilitator may be a certificate in writing which he may in his

discretion revoke at any time, exempt such factory from all or any of such provisions subject to

such conditions, if any, as he may specify therein.

SCHEDULE – XXX

WOODWORKING MACHINERY

1. Definitions: -For the purposes of this Schedule:-

a)

Woodworking machine means a circular saw, band saw, planning machine, chain mortising

machine or vertical spindle moulding machine, operating on wood or cork.

b)

Circular saw means a circular saw working in a bench (including rack bench) but does not

include a pendulum or similar saw which is moved towards the wood for the purpose of cutting

operation.

c)

Band saw means a band saw, the cutting portion of which runs in vertical direction but

does not include a log saw or band resaving machine.

d)

Planning machine means a machine for overhand planning or thicknessing or for both

operations.

2

Stopping and starting device: - An efficient stopping and starting device shall be

[PART IV

DELHI GAZETTE : EXTRAORDINARY

381

provided on every woodworking machine. The control of this device shall be in such a position as

to be readily and conveniently operated by the person in charge of the machine.

3

Space around machine: - The space surrounding every woodworking machine in motion

shall be kept free from obstruction.

4

Floors:- the floor surrounding every woodworking machine shall be maintained in

good and level condition, and shall not be allowed to become slippery, and as far as practicable

shall be kept free from chips or other loose material,

5

Training and Supervision:-

(1)

No person shall be employed at a woodworking machine unless he has been sufficiently

trained to under the adequate supervision of a person who has a thorough knowledge of the

working of the machine.

(2)

A person who is being, trained to work woodworking machine shall be fully and carefully

and the precautions to be observed to secure safe working of the machine.

6.

Circular Saws: - Every circular saw shall be fenced as follows:-

(A)

Behind and in direct line with the saw there shall be a riving knife, which shall have a

smooth Surface, shall be strong, rigid and easily adjustable and shall also conform to the following

conditions:-

(i)

The edge of the knife nearer the saw shall form as are of a circle having a radius of not

exceeding the radius of largest saw used on bench.

(ii)

The Knife shall be maintained as close as practicable to the saw, having regard to the

nature of the work being done at the time and at the level of the bench table the distance between

the front edge of the knife and the teeth of the saw shall not exceed 12 mm.

(iii)

For a saw of a diameter of less than 0.6 meter, the knife extends upwards from the bench

table to within 25 mm3 of the top of the saw, and for a saw of a diameter of 0.6 meter or over

shall extend upwards from the bench teeth of the saw shall not exceed 12 mm.

(B)

The top of the saw shall be covered by a strong and easily adjustable guard with a flange

at the side of the saw farthest from the fence. The guard shall be kept so adjusted that the said

flange shall extend below the roots of the teeth of the saw. The guard shall extend from the top of

the riving knife to a point as low as practicable at the cutting edge of the saw.

(C)

The part of the saw below the bench table shall be protected by two plates of metal or other

Suitable material one on each side of the saw; such plates shall not be more than 15 cm apart,

and shall extend from the axis of the outwards to a distance of not less then.5cm. Beyond the

teeth of the saw-Metal plates, if not headed, shall be of a thickness of at least .25 cm. Or if

headed be of a thickness of at least.125 centimeters‘.

7.

Push Sticks: - A push stick or other suitable appliance shall be provided for use at every

382

DELHI GAZETTE : EXTRAORDINARY

PART IV]

circular saw and at every vertical spindle molding machine to enable the work to be done without

unnecessary risk.

8.

Band Saws: - Every band saw shall be guarded as follows:-

•

Both sides of the bottom pulley shall be completely encased by sheet or expanded

metal or other suitable material.

•

The front of the top pulley shall be covered with sheet or expanded metal or other suitable

material.

•

All portions of the blade shall be enclosed or otherwise secure guarded except the

portion of the blade between the bench table and the top guide.

9.

Planning Machines-

(I)

a planning machine (other than a planning machine which is mechanically fed shall not be

used for overhand planning unless it is fitted with a cylindrical cutter block.

(II)

Every planning machine used for over hand planning shall be provided with a ―bride‖

guard capable of covering the full length and breadth of the cutting slot in the bench, and so

constructed as to be easily adjusted both in a vertical and horizontal director.

(III)

The feed roller of every planting machine used for thicknessing except the combined

machine for overhand planning and thicknessing, shall be provided with an efficient guard.

10.

Vertical spindle moulding machines:-

•

The cutter of every vertical spindle moulding machine shall be guarded by the most

efficient guard having regard to the nature of the work being performed.

•

The wood being molded at vertical spindle moulding shall. If practicable be held in a jig or

holder of such construction as to reduce as for as possible the risk of accident to the worker.

11.

Chain mortising machines: -The chain of every chain mortising machine shall be

provided with a guard which shall enclose the cutters as far as practicable.

12.

Adjustment and maintenance of guards. The guards and other appliances required under

this Schedule shall be:-

maintained in an efficient state. Constantly kept in position while the machinery in motion, and So

adjusted as to enable the work to be done without unnecessary risk.

13.

Exemption:- Paragraphs 6,8,9, and 10 shall not apply to an woodworking machine in

respect of which it can be proved that other safeguards are provided, maintained and used which

render the machine as safe as it would be if guarded in the manner prescribed in this Schedule.

14.

Medical examination and records:-

(1)

Every worker employed on machinery to which this schedule applies shall be examined

by a medical officer within 15 days of his first employment. Such examination shall include

pulmonary test, immunoglobin test, Audiometry test etc. No worker shall be allowed to work after 15

[PART IV

DELHI GAZETTE : EXTRAORDINARY

383

days of his first employment in the factory unless certified fit for such employment by the medical

officer.

(2)

Every worker employed in the said processes shall be re-examined by a medical officer at

least once in every twelve calendar months. Such re-examination shall, wherever the medical

officer considers appropriate, include tests as specified in sub- paragraph (1).

(3)

The medical officer after examining a worker, shall issue a Certificate of Fitness in Form-

24. The record of examination and re-examinations carried out shall be entered in the Certificate

and the Certificate shall be kept in the custody of the occupier of the factory. The record of each

examination carried out under sub paragraphs(1) and (2), including the nature and the results of the

tests, shall also be entered by the medical officer in a health register in Form- 25.

(4)

The Certificate of Fitness and the health register shall be kept readily available for

inspection by the Inspector-cum-Facilitator.

(5)

if at any time medical officer is of the opinion that a worker is no longer fit for employment

in the said process on the ground that continuance therein would involve special danger to the

health of the worker he shall make a record of his findings in the said Certificate and the health

register. The entry of his findings in these documents should also include the period for which he

considers that the said person is unfit for work in the said processes. The person so suspended

from the process shall be provided with alternate placement facilities unless he is fully incapacitated in

the opinion of the Medical officer, in which case the person affected shall be suitably

rehabilitated.

(6)

No person who has been found unfit to work as said in sub-paragraph (5) above shall be re-

employed or permitted to work in the said processes unless the Medical officer, after further

examination, again certifies him fit for employment in those processes.

15.

Appointment of person on machinery:-

(1)

No person shall be allowed to work on machinery specified in this Schedule unless he:-

(a)

has attained the age of eighteen years;

(b)

has been trained in accordance with the sub-paragraph (2); and

(c)

The name of every such person has been entered in a register in Form-48.

(2)

The training shall include suitable and sufficient practical instructions in the matter in

relation to each type of woodworking machinery and safety device.

SCHEDULE – XXXI

RUBBER MILLS

1.

Installation of machines: - Mills for breaking down, cracking, grating, mixing, refining

and warming rubber or rubber compounds shall be so installed that the top of the front roll is not

384

DELHI GAZETTE : EXTRAORDINARY

PART IV]

less than 85cm. Above the floor or working level. Provided that in existing installations where the

top of the front roll is below this height a strong rigid distance bar shall be fitted across the front

of the machine in such position that the operator cannot reach the nip of the rolls.

2.

Safety devices: - (1) Rubber Mills shall be equipped with-

(1)

Hoppers so constructed or guarded that it is impossible for the operator to come into

contact in any manner with the nip of the rolls.

(2)

Horizonatal-satety trop rods or tight wire cables across both front and rear which will

when pushed or pulled, operate instantly to disconnect the power and apply the brakes or to

reverse the rolls.

(3)

Safety trip rods or tight wire cables on rubber mills shall extend across the entire length of

the face of the rolls and shall be located not more than 1.75 meter above the floor or working

level.

(4)

Safety-trip rods and tight wire cables on all rubber mills shall be examined and tested daily

in the presence of the Manager or other responsible person and if any defect is disclosed by such

examination and test the mill shall not be used until such defect has been remedied.

SCHEDULE – XXXII

CENTRIFUGAL MACHINES

1. Definition: -―Centrifugal Machines‖ include centrifugal extractors, separators and driers.

2 Every part of a centrifugal machine shall be

(a)

of good design and construction and of adequate strength;

(b)

properly maintained; and

(c)

examined thoroughly by a competent person at regular intervals.

3.

Interlocking guard for drum or basket-

3.

The cage housing, the rotating drum or basket of every centrifugal machine shall be

provided with a strong lid. The design, construction of the cage as well as the lid should be such that

no access is possible to the drum or basket when the lid is closed.

4.

Every centrifugal machine shall be provided with an efficient interlocking device that

will effectively prevent the lid referred to in sub-paragraph (1) from being opened while the drum

or basket is in motion and prevent the drum or basket being set in motion while the lid is in the open

position.

4.

Braking arrangement:-Every centrifugal machine shall be provided with an effective

arrangement capable of bringing the drum or basket to rest within as short a period of time as

reasonably practicable after the power is cut off.

5.

Operating speed:- No centrifugal machine shall be operated at a speed in excess of the

manufacturers rating which shall be legibly stamped at easily visible places both on the inside of

[PART IV

DELHI GAZETTE : EXTRAORDINARY

385

the basket and on the outside of the machine casing.

6.

Exceptions:—Sub-paragraph (2) of paragraph 3, paragraphs 4 and 5 shall not apply in

case of top lung machines or similar machines used in the sugar manufacturing industry.

SCHEDULE – XXXIII

POWERS PRESSES

1.

Application: - This Schedule shall apply to all types of power presses including press

brakes, except when used for working hot metal.

2.

Definition: -For the purpose of this Schedule,-

(i)

― approved‖ means approved by the Chief Inspector-cum-Facilitator;

(ii) ―fixed fencing‖ means fencing provided for the tools of a power press being fenced which has

no moving part associated with or dependent upon the mechanism of a power and includes that

part of a closed tool which acts as a guard;

(iii)

―power press‖ means a machine used in metal or other industries for moulding, pressing,

blanking, raising, [ drawing and similar other purposes;

(iv)

―safety device‖ means the fencing and any other safeguard provided for the tools of a

power press.

3.

Starting and stopping mechanism: - The starting and stopping mechanism shall be provided

with a safety stop so as to prevent over running of the press or descent of the ram during tool

shutting. Etc.

4.

Protection of tool and die:-

(v)

Each press shall be provided with a fixed guard with slip plate on the underside enclosing the

front and all sides of the tool.

(vi)

Each die shall be provided with a fixed guard surrounding its front and sides, and extending

to the back in the form of a tunnel through which the pressed article falls to the rear of the press.

(vii)

The design, construction and mutual position of the guards referred to in sub- Para-graphs

(1) and (2) shall be such as to preclude the possibility of the worker‘s hand or fingers reaching

the danger zone.

(viii)

The machine shall be fed through a small aperture at the bottom of the dye guard, but a

wider aperture may be permitted for second or subsequent operations if feeding is done through a

chute.

(ix)

Notwithstanding anything contained in sub-paragraphs (1) and (2) an automatic or an

interlocked guard may be used in place of a fixed guard, but where such guards are used they shall

be maintained in an efficient working condition and if any guard develops a defect, the power shall

not be operated unless the defect guard is removed.

(x)

Appointment of persons to prepare power presses for use:-

386

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(1)

Except as provided in sub-paragraph (4) of paragraph 4, no person shall set, re-set, adjust

or try out the tools on a power press or install or adjust any safety device thereon, being installation

or adjustment preparatory to production of die proving, or carry out an inspection and test of any

safety device thereon required by paragraph 8 unless he:-

(a)

has attained the age of eighteen years;

(b)

has been trained in accordance with the sub-paragraph (2); and

(c)

has been appointed by the occupier of the factory to carry out those duties in respect of the

class or description of power press or the class or description of safety device, as the case may be

belongs; and the name of every such person shall be entered in a register in Form-48.

(2)

The training shall include suitable and sufficient practical instructions in the matter in

relation to each type of power press and safety device in respect of which it is proposed to appoint

the person being trained.

5.

Examination and testing of power presses and safety devices:

(1)

No power press or safety device shall be taken into use in any factory for the first time in

that factory or in case of a safety device for the first time on any power press, unless it has been

thoroughly examined and tested, in the case of a power press, after installation in the factory or in

the power press in connection with which it is to be used.

(2)

No power press shall be used unless it has been thoroughly examined and tested by a

competent person within the immediately preceding period of twelve months.

(3)

No power press shall be used unless every safety device (other than fixed fencing) thereon

has within the immediately preceding period of six months when in position on that power press,

been thoroughly examined and tested by a competent person.

(4)

The competent person carrying out an examination and test under the foregoing provision

shall make a report of examination and test containing the following particulars and every such

report shall be kept readily available for inspection;

(a)

Name of the occupier of the factory;

(b)

Address of the factory;

(c)

Identification number or mark sufficient to identify the power press or the safety device, as

the case may be;

(d)

Date on which the power press or the safety device was first taken into use in the factory;

(e)

The date of each periodical thorough examination carried out as per requirements of sub-

paragraph (2) above;

(f)

Particulars of any defects affecting the safe working of the power press or the safety device

found during such thorough examinations and steps taken to remedy such defects.

6.

Defect disclosed through examination and tests:-

(1)

Where any defect is disclosed in any power press or in any safety device by any

examination and test under paragraph 6 and in the opinion of the competent person carrying out

[PART IV

DELHI GAZETTE : EXTRAORDINARY

387

the examination and test, either:-

(a)

the said defect is a cause of danger to workers and in consequence the power press or

safety device, as the case may be ought not to be used until the said defect has been remedied; or

( b) the said defect may become a cause of danger to workers and in consequence the

power press or safety device as the case may be, ought not to be used after the expiration of a

specified period unless the said defect has been remedied, such defect shall, as soon as possible

after the completion of the examination and test, be notified in writing by the competent person to

the occupier of the factory and in the case of a defect falling within clause (b) of this sub-

paragraph, such notification shall include the period within which, in the opinion of the competent

person, the defect ought to be remedied.

(2)

In every case where notification has been notified under this paragraph, a copy of the

report made under sub-paragraph, a copy of the report made under sub-paragraph (4) of

paragraph 6 shall be sent by the competent person to the Inspector-cum-Facilitator of the

concerned area within fourteen days of the completion of the examination and test.

( 3) Where any such defect is notified to the occupier in accordance with the foregoing provisions

of this paragraph, the power press or safety device as the case may be, having the said defect, shall

not be used;

(a)

in the case of a defect falling within clause (a) of sub-paragraph (1) until the said defect

has been remedied; and

( b) in the case of defect falling within clause (b) of sub-paragraph (1) until the said defect has been

remedied after the expiration of the specified period.

( 4) As soon as is practicable, after any defect of which notification has been notified under sub-

paragraph (1), has been remedied, a record shall be made by or on behalf of the occupier stating

the measures by which and the date on which the defect was remedied.

7.

Inspection and test of safety devices:

(1)

No power press shall be used after the setting, resetting or adjustment of the tools thereon

unless a person appointed or authorized for the purpose under paragraph 5 has inspected and tested

every safety device thereon while it is in position on the said power press and has certified it to in

order:

Provided that no inspection, test and certificate shall be required where any adjustment of the

tools has not caused or resulted in any alteration to or disturbance of any safety device on the

power press, and, if after the adjustment of the tools, the safety device remain, in the opinion of

the said person in efficient working order.

(2)

Every power press and every safety devices thereon while it is in position on the said

power press shall be inspected and tested by a trained person every day.

388

DELHI GAZETTE : EXTRAORDINARY

PART IV]

8.

Defects disclosed during an inspection and test:-

(1)

Where it appears to any person as a result of any inspection and test carried out by him

under paragraph 8 that any necessary safety device is not in proper position on a power press or that

any safety device which is in position on a power press, is not in his opinion suitable he shall

notify the same to the manager forthwith.

(2)

Except as provided in sub-paragraph (3) where any defect is disclosed in a safety device

any inspection and test under paragraph 8, the person carrying out the inspection and test shall

notify the same to the manager forthwith.

(3)

Where any defect in a safety device is the subject of a notification in writing under

paragraph 7 by virtue of which the use of the safety device may be continued during the specified

period without the said defect having been remedied, the requirement in sub-paragraph (2) of this

paragraph shall not apply to the said defect until the said period has expired.

9.

Identification of power presses and safety devices:-For the purpose of identification

every power press and every safety device provided for the same, shall be distinctively and plainly

marked.

10.

Training the instructions to operators:-The operators shall be trained and instructed in

the safe method of work before starting work on any power press.

12 Exemptions:-

(1)

If in respect of any factory, the Chief Inspector-cum-Facilitator of Factories is satisfied that

owing to the circumstances or infrequency of the processes or for any other reason, all or any of

the provisions of this schedule are not necessary for the protection of the workers employed on

any power press or in the factory, the Chief Inspector-cum-Facilitator may by a certificate in

writing (which he may in his discretion revoke at any time), exempt such factory from all or any

of such provisions subject to such conditions, if any, as he may specify therein.

(2)

Where such exemption is granted, a legible copy of the certificate, showing the conditions if

any, subject to which it has been granted, shall be kept posted in the factory on a place where it

may be conveniently read by the persons employed.

SCHEDULE – XXXIV

SHEARS SLITTERS AND GUILLOTINE MACHINES

1. Definitions:-For the purpose of this schedule:-

(a)

―guillotine‖ means a machine ordinarily equipped with straight, bevel edged blade operating

Vertically against a stationery resisting edge and used for cutting metallic or non-metallic or non-

metallic substances;

(b)

―Shears‖ or ―shearing machine‖ means a machine ordinarily equipped with straight, bevel

edged blades operating vertically against resisting edged, or with rotary, overlapping cutting

wheels and used for shearing metals or non- metallic substances; and

[PART IV

DELHI GAZETTE : EXTRAORDINARY

389

(c)

―Slitter‖ or slitting machine‖ means a machine ordinarily equipped with circular disc-type

knives, and used for trimming or cutting into metal or non- metallic substances or for slitting them

into narrow strips; for the purpose of this schedule, this term includes bread or other food slices

equipped with rotary knives or cutting discs.

2 Guillotine and Shears:-

(1)

Where practicable, a barrier metal guard of adequate strength shall be provided at the

front of the knife, fastened to the machine frame and shall be so fixed as would prevent any part

of the operator‘s body to reach the descending blade from above, below or through the barrier

guard or from the sides:

Provided that in case of machines used in the paper printing and allied industries, where

a fixed barrier metal guard is not suitable on account of the height and volume of the material being

bed, there shall be provided suitable staring devices which require simultaneous action of both the

hands of the operator or an automatic device when will remove both the hands of the operator from

the danger zone at every descent of the blade.

(2)

At the back of such machines, an inclined guard shall be provided over which the slit

pieces would slide and be collected at a safe distance in a manner as would prevent a person at the

back from reaching the descending bladed

(3)

Power-driven guillotine cutters, except continuous feed trimmers, shall be equipped with:-

(a)

starting devices which require the simultaneous action of both hands to start the cutting

motion and of at least one hand control during the complete stroke of the knife: or

(b)

an automatic guard will remove the hands of the operator from the danger zone at every

decent of the blade, used in conjunction with one hand starting devices which require two distinct

movements of the device to start the cutting motion, and so designed as to return positively to the

non-starting position after each complete cycle of the knife.

(4)

Where two or more workers are employed at the same time on the same power-driven

guillotine cutter equipped with two-hand control, the device shall be so arranged that each worker

shall be required to use both hands simultaneously on the safety trip to start the cutting motion,

and at least one hand on a control to complete the cut.

(5)

Power-driven guillotine cutters, other than continuous trimmer, shall be provided, in

addition to the brake or other stopping mechanism, with an emergency device which will prevent

the machine from operating in the event of failure of the brake when the starting mechanism is in

the non-starting position.

3.

Slitting Machine:-

(1)

Circular disc type knives on machines for cutting metal and leather, paper, rubber, textile or

other nonmetallic substances shall, if within reach of operators standing on the floor of working

390

DELHI GAZETTE : EXTRAORDINARY

PART IV]

level, be provided with guards enclosing the knife edges at all times as near as practicable to the

surface of the material, and which may either:-

(a)

automatically adjust themselves to the thickness of the material; or

(b)

be fixed or manually adjusted so that the space between the bottom of the guard and the

material will not exceed 6 mm (1/4inch) at any time.

(2)

Portions of blades underneath the tables or benches of slitting machines shall be covered

by guards.

4.

Index cutters and Vertical Paper Slotters:- Index cutter, and other machines for cutting

strips from the ends of books, and for similar operations, shall be provided with fixed guards, so

arranged the fingers of the operators cannot come between the blades and the tables.

5.

Corner Cutters:-Corner cutters used in the manufacture of paper boxes, shall be

equipped with:-

(a)

suitable guard, fastened to the machines in front of the knives and provided with slots or

perforations to afford visibility of the operations ;or

(b)

other guards equally efficient for the protection of the fingers of the workers.

6.

Band Knives:- Band Wheels on band knives, and all portions of the blades except the

working side between the sliding guide and the table on vertical machines, or between the wheel

guards on horizontal machines, shall be completely enclosed with hinged guards of sheet metal

not less than 1 mm (0.04 inch) in thickness or of other material of equal strength.

SCHEDULE – XXXV

THERMIC FLUID HEATERS

1.

All heaters shall be of such construction that coils are removal for periodic cleaning, visual

inspection and hydraulic test.

2.

Suitable arrangements shall be made for cooling the furnace effectively in case of power

failure.

3.

Before restarting the furnace, it shall be effect purged.

4.

Velocity or flow of the thermic fluid shall not be allowed to fall below the minimum

recommended by the manufactures while the heater is in operation.

5.

The thermic fluid shall be circulated in a closed-circuit formation with an expansion–

cum-deaerator tank. This tank shall be located outside the shed where the heater is installed

6.

Every heater shall be provided with a photo-resistor actuated auto-visual alarm to indicate

flame failure and automatic burner cut

7.

The stack temperature monitor-cum-controller with audiovisual alarm shall be provided so

as to warn operator in case the outlet temperature exceeds the specific minimum.

[PART IV

DELHI GAZETTE : EXTRAORDINARY

391

8.

Where inspection doors are provided on the furnace they shall be interlocked with the burner

itself so that they cannot be opened until burner is shut off and furnace is cooled sufficiently.

9.

All heaters shall also be provided with the following safety devices:-

(i)

Level control in the expansion tank

(ii)

temperature control of thermic fluid;

(iii)

differential pressure switch on the outlet line of the heater tubes; and

(iv)

temperature control device for the fuel oil supply to the burner.

10.

All devices specified in paragraph (9) shall have interlocking arrangement with burner so

that in case of any predetermined limits being crossed, the supply of fuel and air shall

automatically be cut-off.

11.

All safety interlock when operated shall be indicated on the control panel of the heater by a

suitable audio-visual alarm

12.

Every heater unit shall be provided as a standard accessory an arrangement for shifting with

low pressure steam or nitrogen for putting out the fire.

13.

Electoral panel for the heater shall be located near the heater but not so close as to be

exposed to spilling or leaking oil.

14.

The heater shall be located in a place partitioned off with fire proof material from other

manufacturing activities.

15.

Explosion vent shall be installed that release thanks place at safe location.

16.

The heater coil shall be subjected to pressure test by competent person once at least in

every twelve months. The test pressure shall not be less than twice the operating pressure.

17.

If repairs are carried out to the coil, it shall be tested before taking it into use.

18.

The thermic fluid shall conform to the specifications specified by the manufacturers and

shall be tested by competent person for suitability at least once in every three months period.

Such test shall include test for acidity, suspended matter, ash contents, viscosity and flash point.

19.

Cleaning of internal surface of the heater so at checkup of refractory surface on the inside

shall be carried out every month or as often as required depending upon working conditions. The

coils shall be removed and surface of the coils cleaned thoroughly once at least in a period of six

months. The burner, nozzles, oil filters and pumps shall be cleaned once a week during the period of

use.

20.

A separate register containing the following information shall be maintained:-

(a)

weekly checks carried out confirming the effectiveness of the interlock;

(b)

weekly checks confirming that all accessories are in good state of repairs; and

392

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(c)

information regarding fuel , oil temperature, pressure, thermic fluid inlet/outlet pressure and

temperature, fuel gas temperature, recorded at four hourly intervals.

21.

The heater when in operation shall always be kept in charges of a trained operator.‖

SCHEDULE XXXVI

MANUFACTURE OF CHROMIC ACID OR MANUFACTURE OR RECOVERY OF

THE BICHROMATE OF SODIUM, POTASSIUM OR AMMONIUM

1.

Definition:

the purposes of this schedule –

(a)

―Chrome process‖ means the manufacture of chromic acid or bichromate of sodium or

potassium or ammonium or the manipulation, movement or other treatment of these substances in

connection with their manufacture.

(b)

―Efficient exhaust draught‖ means localized ventilation effected by mechanical or other

means for the removal of gas, Vapour, dust or fume so as to prevent them from escaping into the

air of any place in which work is carried on. No draught shall be deemed efficient which fails to

remove smoke generated to the point where such gas, Vapour, fumes or dust originate.

(c)

―Suspension‖ means suspension from employment in any of the chrome process specified

by written certificate in the Health Register (Form No. 20) signed by the Certifying Surgeon, who

shall have power of suspension as regards all persons employed in any such process.

2.

Prohibition relating to pregnant women and Adolescent

No pregnant woman or adolescent shall be employed or permitted to work on any chrome process.

3.

Efficient Exhaust System

(1)

The following chrome processes shall not be carried on without the use of an efficient

exhaust-draught, namely :-

(a)

grinding;

(b)

sieving;

(c)

batch mixing;

(2)

(i) All equipment for the extraction or suppression of dust/fumes shall at least once in

every six months be examined and tested by competent person, and any defect disclosed by such

examination and test shall be rectified as soon as practicable.

(3)

A register containing particulars of such examination and test shall be kept in

Form No. 26

4.

Separation of certain processes

[PART IV

DELHI GAZETTE : EXTRAORDINARY

393

The following chrome processes namely :-

(a)

grinding of raw materials, and

(b)

sieving of raw materials, shall be carried on in such manner and under such conditions as

to secure effectual separation from any processes.

5.

Washing facilities

(1)

Where acidification, sulphate settling or washing, concentration, crystallization,

centrifugation or packing is carried out, there shall be provided close to each worker‘s station –

(a)

wash places installed for washing hands and feet frequently in running water, and

(b)

a container holding at least 20 ounces of 10 per cent solution of sodium bisulphite or any

other suitable reducing agent.

(2)

There shall also be provided and maintained in a cleanly stated and good repair washing

accommodation under cover with a sufficient supply of soap and towels on the scale indicated

below. At least one tap or stand pipe for every 10 employees and the tap or pipe shall be spaced

not less than 1.2 meters apart.

Note. – In computing the total number of taps required for the purposes of this rule, the taps or

stand pipes as required under clause 5 (1) (c) shall be included.

6.

Time allowed for washing

Before each meal and before the end of the day‘s work at least ten minutes, in addition to the

regular meal time shall be allowed for washing to each person employed in a chrome process.

7.

Floorings

No pregnant woman or young person shall be employed or permitted to work in any

room in which the said processes are carried on.

(a)

of cement or similar other material so as to be smooth and impervious to water and provided

with suitable gradient and drainage;

(b)

maintained in sound condition and cleaned daily.

8.

Medical Examination by Medical Officer:

(1)

Every worker employed in a processes to which this schedule applies shall be examined

by a medical officer within 15 days of his first employment. Such examination shall include tests

as required by medical officer. No worker shall be allowed to work after 15 days of his first

employment in the factory unless certified fit for such employment by the medical officer

(2)

Every worker employed in the said processes shall be re-examined by a medical officer at

least once in every twelve calendar months. Such re- examination shall, wherever the medical

officer considers appropriate, include tests as specified in sub- paragraph (1).

(3)

The medical officer after examining a worker, shall issue a Certificate of Fitness in Form-24.

394

DELHI GAZETTE : EXTRAORDINARY

PART IV]

The record of examination and re-examinations carried out shall be entered in the Certificate and the

Certificate shall be kept in the custody of the occupier of the factory. The record of each examination

carried out under sub paragraphs(1) and (2), including the nature and the results of the tests, shall

also be entered by the medical officer in a health register in Form-05.

(4)

The Certificate of Fitness and the health register shall be kept readily available for

inspection by the Inspector-cum-Facilitator.

(5)

if at any time medical officer is of the opinion that a worker is no longer fit for employment

in the said process on the ground that continuance therein would involve special danger to the

health of the worker he shall make a record of his findings in the said Certificate and the health

register. The entry of his findings in these documents should also include the period for which he

considers that the said person is unfit for work in the said processes. The person so suspended from

the process shall be provided with alternate placement facilities unless he is fully incapacitated in the

opinion of the Medical officer, in which case the person affected shall be suitably rehabilitated.

(6)

No person who has been found unfit to work as said in sub-paragraph

(5) above shall be re-employed or permitted to work in the said processes unless the Medical officer,

after further examination, again certifies him fit for employment in those processes.

9.

Protective Equipment

The occupier shall provide and maintain for the use of all persons employed –

a.

in grinding, sieving or mixing raw materials, sufficient and suitable respirators (issued

separately for each individual) the filtering materials of which shall be renewed daily;

b.

in roasting process, suitable footwear;

c.

in acidification, settling concentration, crystallization, centrifugation or packing suitable

aprons and protective coverings for hands and feet.

Arrangements shall be made by the occupier for the examination and cleaning of all the

protective equipment at the close of each day‘s work and for the repairs or renewal thereof when

necessary.

10.

Use of Protective Equipment

Every person employed in a chrome process shall make use of the protective equipment provided

under rule 8

11.

Cloak Room

There shall be provided and maintained in a clean state and in good repair for the use of all

persons employed in any chrome process –

(a)

a cloak-room for street clothing put off during working hours including adequate,

arrangements for drying such clothing when wet, such accommodation shall be separate from

any mess room;

(b)

separate and suitable arrangements for the storage of protective clothing provided under

[PART IV

DELHI GAZETTE : EXTRAORDINARY

395

paragraph 8.

12.

Mess Room

There shall be provided and maintained for the use of all persons remaining within the premises

during the meal intervals a suitable mess-room providing accommodation of at least 0.9 sq. meters

per head and furnished with –

a.

a sufficient number of tables and chairs or benches;

b.

arrangements for washing utensils;

c.

adequate means for warming food.

The mess-room shall be placed under the charge of a responsible person and shall be kept clean.

13.

Prohibition of foods, drinks etc.

No food, drink, ―pan‖, ―supari‖, or tobacco shall be brought or consumed by any worker or in any

work-room in which chrome process is carried on and no person shall remain in any such room

during intervals for meals or rest.

14.

Fencing of Vessel

Every fixed vessel, whether pot, pan vat or other structure, containing any dangerous material,

and not so covered as to eliminate all reasonable risk of accidental immersion of any portion of the

body of a person employed shall be fenced as follows :-

(a)

Each such vessel shall, unless its edge is at least 91.4 centimeters the adjoining ground or

platform be securely fenced to a height of at least 91.4 centimeters above such adjoining ground or

platform;

(b)

No plank or gang-way shall be placed across or inside any such vessel unless such plank

or gang-way is –

(i)

at least 45.7 centimeters in width, or

(ii)

securely fenced on both sides, either by upper and lower rails to a height of 91 centimeters

or by other equally efficient means;

(c)

If any two such vessels are near each other and the space between them clear of any

surrounding brick-work or other work, is either –

(i)

less than 45.7 centimeters in width, or is 45.7 or

(ii)

more centimeters in width, but is not securely fenced on both sides to a height of at least

91.4 centimeters secure barriers shall be placed so as to prevent any passage between them.

15.

Cautionary Notices

A cautionary notice in the form specified by the Chief Inspector-cum- Facilitator and printed in

the language of the majority of the workers, employed shall be affixed in a prominent place in

the factory where it can be easily and conveniently read by the workers.

396

DELHI GAZETTE : EXTRAORDINARY

PART IV]

16.

Exemption

If in respect of any factory the Chief Inspector-cum-Facilitator is satisfied that owing to the

exceptional circumstances or the in frequency of the process, or for any other reason, all or any of

the provisions of this Schedule are not necessary for the protection of the persons employed in such

factory, he may be certificate in writing exempt such factory from all or any of the provisions

indicated in such certificate on such conditions as he may specify therein. Such certificate may at

any time be revoked by the Chief Inspector-cum-Facilitator without assigning reasons.

SCHEDULE XXXVII

WELDING/CUTTING OPERATION WITH THE USE OF LPG

1.

Applicability:

This Schedule is applicable to all operations in welding/cutting of materials with the use of Liquefied

petroleum gas or acetylene gas or argon etc.; in on junction with oxygen gas.

2.

Equipment:

(1)

Gas cylinders whether filled of empty shall not be stored in rooms where welding or

cutting work is being done.

(2)

Liquefied gas cylinder, when is use shall always be kept in an upright position and shall be so

placed that they cannot be knocked over.

(3)

Open flames, lights, lighting of fire and smoking shall be prohibited in close proximity to any

cylinder containing flammable gases, except those which are in use for welding, cutting or heating.

(4)

All cylinders shall be stored at a safe distance of not less than 10 meters from all operations

which produce, flames, sparks of molten metal or result in excessive heat.

(5)

Every gas cylinder shall be provided with efficient standard type pressure regulator and back

flow of gas will be restricted by second non-return type valve.

(6)

All welding/cutting torch shall be of standard type which should be provided with non-return

valve.

(7)

Suitable type of fire extinguishers shall be provided near the welding/ cutting place and also

near the gas cylinder storage.

(8)

Pipe lines from gas cylinders shall be painted with distinctive colours for identification of each

gas.

3.

General:

(1)

Welding and cutting operation shall be prohibited in areas containing explosive of flammable

dusts, gases, oil or vapours.

(2)

Welding/cutting operations that are carried out in places where persons other than the

welders and their helpers are working or passing shall be enclosed by means of suitable stationary

[PART IV

DELHI GAZETTE : EXTRAORDINARY

397

or portable screens at least 2.15 meters (7 ft.) in height.

(3)

All equipment like welding/cutting torch, pipe lines, brackets, non- return valves and

pressure regulators shall be examined by a competent person having know-how of such

equipment, at least once in a period of 15 days.

(4)

The welding/cutting process shall be carried out by workers specially trained in that job and

know of the hazards of fire, back-fire and explosion.

(5)

A log book of examination of equipment and a register of trained workers for welding /

cutting operation shall be maintained in the forms as directed by the Inspector-cum-Facilitator.

SCHEDULE- A (Competent Person)

See Rule 2(c)

1

The Chief Inspector-cum-Facilitator as stipulated in sub-rule (1) of Rule 33 of may

recognize any person as a "Competent person", for such area and for such period as may be

specified, for the purpose of carrying out tests, examination and inspections of such dangerous

machineries, hoists and lifts, lifting machines and lifting tackles, pressure plants, confined

spaces, ventilation systems and such other processes or plants and equipment located in a factory

or an establishment, as stipulated in the Code and the rules, if such a person possesses the

qualifications, experience and other requirements given below.

Provided that, the Chief Inspector-cum-Facilitator may relax the requirements of

qualifications (but not the requirements in respect of the facilities at the command of such a

person) if such a person is exceptionally experienced and knowledgeable.

2

The person to be recognised as the competent person under the Code shall not be above

the age of sixty-five years and shall be physically and medically fit for the purpose of carrying

out the requisite tests, examination and inspection.

Sl.

No.

Equipment

to

which

competency

is

recognised.

Qualification

required

Experience for the purpose

Facilities at his

command

1

2

3

4

5

1.

Certificate

of stability

for

buildings

Degree in Civil

or

Structural

engineering or

Equivalent

(i) A minimum of 7 years‘

experience in the design of

construction

or

testing

or

repairs of structures.

(ii)

Knowledge

of

non-

destructive

testing,

various

codes of practices that are

current and the effect of the

vibrations and natural forces on

the stability of the building, and

398

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(iii) Ability to arrive at a

reliable conclusion with regard

to the safety of the structure of

the building.

2.

―Dangerous

machines‖

Degree

in

Electrical

or

Mechanical or

Production

or

Textile

Engineering or

equivalent

(i) A minimum of 7 years‘

experience in :-

(a) design or operation or

maintenance, or

(b) testing, examination and

inspection

of

relevant

machinery, their guards, safety

devices and appliances.

(ii) He shall –

(a) be conversant with safety

devices

and

their

proper

functioning.

(b) be able to identify defects

and any other cause leading to

failure; and

(c) have ability to arrive at a

reliable conclusion with regard

to the proper functioning of

safety device and appliance and

machine guard.

Gauges

for

measurement,

instruments

for

measurement of

speed and any

other equipment

or

device

to

determine

the

safety in the use

of the dangerous

machines.

3.

Lifts

and

Hoists

A

degree

in

Electrical

or

Mechanical or

Production

Engineering or

its Equivalent

(i) A minimum experience of 7

years in :-

(a)

design

or

erection

or

maintenance, or

(b)

inspection

and

test

procedures, of lifts and hoists;

(ii)

He

shall

be

--

(a) Conversant with relevant

codes of practices and test

procedures that are current.

(b)

Conversant

with

other

statutory requirements covering

the safety of the Hoists and

Lifts;

(c) able to identify defects and

arrive at a reliable conclusion

with regard to the safety of

Hoists and Lifts.

4.

Lifting

Machinery

and Lifting

Tackle

Degree

in

Mechanical or

Electrical

or

Production

or

Metallurgical

Engineering or

(i) A minimum experience of 7

years ---

(a)

design

or

erection

or

maintenance, or

(b) testing, examination and

inspection, of lifting machinery,

Facilities

for

load

testing,

tensile

testing,

heat

treatment,

equipment/

gadget

for

[PART IV

DELHI GAZETTE : EXTRAORDINARY

399

its equivalent

chains, ropes and lifting tackles.

(ii)

He

shall

be

--

(a) Conversant with relevant

codes of practices and test

procedures that are current.

(b) Conversant with fracture

mechanics and metallurgy of

the material of construction;

(c)

Conversant

with

heat

treatment/

stress

relieving

techniques as applicable to

stress bearing components and

parts of lifting machinery and

lifting tackles.

(d)

capable

of

identifying

defects and arriving at a reliable

conclusion with regard to the

safety of lifting machinery,

chains, ropes and lifting tackles.

measurement,

gauges and such

other equipment

to determine the

safe

working

conditions of the

lifting machinery

tackle.

5.

Pressure

Plant

Degree

in

Chemical

or

Electrical

or

Metallurgical

or Mechanical

or

Production

Engineering or

its equivalent

(i) A minimum experience of 7

years ---(a) design or erection

or maintenance, or (b) testing,

examination and inspection, of

pressure plant.

(ii)

He

shall

be

--

(a) Conversant with relevant

codes of practices and test

procedures relating to pressure

vessels.

(b) Conversant with statutory

requirements concerning the

safety

of

unfired

pressure

vessels

and

equipment

operating

under

pressure;

(c)

Conversant

with

non-

destructive testing techniques

as are applicable to pressure

vessels.

(d) able to identifying defects

and arriving at a reliable

conclusion with regard to the

safety of pressure plants.

Facilities

for

carrying

out

hydraulic test, on

destructive test,

gauges

equipment/

gadgets

for

measurement,

and

any

other

equipment

or

gauges

to

determine

the

safety in the use

of

Pressure

vessels.

6.

Precautions

against

dangerous

fumes

Master‘s degree

in

Chemistry

or a degree in

Chemical

Engineering.

(i) A minimum of 7 years in

collection

and

analysis

of

environmental

samples

and

calibration

of

monitoring

equipment;

Meters,

instruments and

devices

duly

calibrated

and

certified

for

400

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(ii)

He

shall

be

--

(a) Be conversant with the

hazardous

properties

of

chemicals and their permissible

limit values.

(b) Be conversant with the

current techniques of sampling

and

analysis

of

the

environmental

contaminants

(c) be able to arrive at a reliable

conclusion as regards the

safety in respect of entering and

carrying out hot work.

(ii)

He

shall

be

--

(a) Be conversant with the

hazardous

properties

of

chemicals and their permissible

limit values.

(b) Be conversant with the

current techniques of sampling

and

analysis

of

the

environmental contaminants.

(c) be able to arrive at a reliable

conclusion as regards the

safety in respect of entering and

carrying out hot work.

carrying out the

tests

and

certification

of

safety in working

in

confined

spaces.

7.

Ventilation

systems

(i) Grinding

or

glazing

metals and

processes

incidental

thereto.

(ii) Cleaning

or

smoothing,

roughening

etc.

of

articles, by a

jet

and

metal shot,

or grit, or

other

abrasive

propelled by

a blast of

compressed

air

or

Degree

in

Mechanical or

Production

or

Electrical

Engineering or

equivalent.

(i) A minimum of 7 years in the

design, fabrication, installation

testing of ventilation system

and systems used for extraction

and collection of dusts, fumes

and vapours and other ancillary

equipment.

(ii) He shall be conversant with

relevant codes of practice and

tests procedures that are current

in respect of ventilation and

extraction system for fumes and

be able to arrive at a reliable

conclusion

with

regard

to

effectiveness of the system.

Facilities

for

testing

the

ventilation

systems,

instruments and

gauges

for

testing

the

effectiveness of

the

extraction

systems

for

dusts,

vapours

and fumes and

any

other

equipment

needed

for

determining the

efficiency and a

adequacy

of

these

systems.

He shall have the

assistance of a

suitable qualified

technical person

[PART IV

DELHI GAZETTE : EXTRAORDINARY

401

(3) The Chief Inspector-cum-Facilitator shall, on receipt of an application as per Proforma-I or

Proforma-II from a person or institution respectively, intending to be recognized as a

"Competent person", register such application immediately and after having satisfied himself as

regard competence and facilities available at the disposal of the applicant, either recognise the

applicant as a "Competent person" and issue a certificate of competency as prescribed in

Proforma-III within a period of sixty days from the date of receipt of the application or reject the

application specifying the reasons therefore.

(4) Competency Certificate under the Code shall be issued for a period of one calendar year.

(5) The Chief Inspector-cum-Facilitator may, after giving an opportunity to the person of being

heard, revoke the certificate of competency:-

(i) if he has a reasons to believe that competent person:-

(a) has violated any of the conditions stipulated in the certificate of competency or;

(b) has carried out a test, examination and inspection or has acted in a manner inconsistent with

the intent or the purpose of the Code and rules or has omitted to act as required under the Code

and Rules; or

(ii) for any other reasons to be recorded in writing.

PROFORMA-I

APPLICATION FOR GRANT OF CERTIFICATE OF COMPETENCY TO A PERSON

1. Name :

2. Date of Birth :

3. Designation :

4. Name of organisation, if any:

5. Education Qualifications :

(Copies of testimonials to be attached)

6. Details of Professional experience :

(in chronological order)

Period of Service

Designation

Area of Responsibility

7. Membership, if any, of Professional bodies :

8. (a) Details of Facilities (Examination, testing, etc.,) at his disposal:

stream.

(iii)

Handling

and

processing

of asbestos,

(iv)

manufacture

of Rayan by

Viscose

process.

(v) Foundry

operations.

who can come to

a

reasonable

conclusion as to

the adequacy of

the system.

402

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(b) Arrangement for calibrating and maintaining the accuracy of these facilities:

9. Purpose for which competency certificate is sought (Specify Sections of the Code) :

10. Whether the applicant has been declared as a competent person under any other statute. ( If

so, furnish details):

11. Any other relevant information :

12. Declaration by the applicant :

I, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ., hereby declare that the information furnished

above, is true, I undertake :

a) that in the event of any change in the facilities at my disposal (either addition or deletion) or

my leaving the aforesaid organization, I will promptly inform The Chief Inspector-cum-

Facilitator;

b) to maintain the facilities in good working order, calibrated periodically as per manufacturer‘s

instructions or as per National Standards ; and

c) to fulfil and abide by all the conditions stipulated in the Certificate of Competency and

instructions issued by Chief Inspector-cum-Facilitator from time to time.

Date and Place :

SIGNATURE OF THE APPLICANT

(NAME IN BLOCK LETTER)

PROFORMA-II

FORM OF APPLICATION FOR GRANT OF CERTIFICATE OF COMPETENCY TO

AN INSTITUTION

1. Name and full address of the Institution :

2. Institutions status (Specify whether Government, Autonomous, Co-operative, Corporate,

Private, etc.,):

3. Purpose for which Competency Certificate is sought (Specify Section(s) of the Code):

4. Whether the Institution has been declared as a competent person under this or any other

statute. If so, give details:

5. Particulars of persons employed and possessing qualification & experience :

Sl. No. Name &

Designation

of

Testing

Engineer

Qualification

Experience

Section(s) and the rules under

which competency is sought for

6. Details of facilities (relevant to item 3 above) and arrangements made for their maintenance

and calibration periodically :

7. Any other Relevant information:

8. Declaration:

I, . . . . . . . . . . . . . . . . . . . . . . . hereby, on behalf of . . .. . . . . . . . . . .. . . . , certify the details

furnished above, are correct to the best of my knowledge. I undertake to :

[PART IV

DELHI GAZETTE : EXTRAORDINARY

403

a) maintain the facilities in good working order, calibrated periodically as per manufactures

instructions or as per National Standards ; and

b) fulfil and abide by all conditions stipulated in the Certificates of competency and instructions

issued by the Chief Inspector-cum-Facilitator, from time to time

SIGNATURE OF HEAD OF THE INSTITUTION OR OF THE PERSONS AUTHORISED TO

SIGN ON HIS BEHALF.

DESIGNATION :

Date and place:

PROFORMA-III

FORM OF CERTIFICATE OF COMPETENCY ISSUED TO A PERSON

OR AN INSTITUTION

I, . . . . . . . . . . . . . . . . . . . in exercise of the powers conferred on me under Section 2 (l) of the

occupational Safety, Health and Working Conditions Code, 2020 and the rules made there under,

hereby recognize . . . . . . . . . . . . . . . (Name of the Institution) with its testing engineer(s)

Sh……………………………………..or Shri . . . . . . . . . . . . . (Name of the person), testing

engineer of (Name of the Organization) to be a competent person for the purpose of carrying out

tests, examinations, inspections and certification for such buildings, dangerous machinery, lifts

and hoists, lifting machines and lifting tackles, pressure plants, confined space, ventilation

system and process or plant and equipment as the case may be, used in a factory located in. . . . . .

. . . . . . . . . . . . . * under section(s) . . . . . . . . . . . . . . . . . . . . . . and the rules made there under.

*Strike out the words not applicable.

This certificate is valid from . . . . . . . . . . . . . . . . . . . . . . to . . . . . . . . . . . . .. . . . .

This certificate is issued subject to the conditions stipulated hereunder :-

(i) Tests, examinations and inspections shall be carried out in accordance with the provisions of

the Code and the Rules made there under ;

(ii) Tests, examinations and inspections shall be carried out under direct supervision of the

competent person or by a testing engineer so authorized by an institution that is recognized as a

competent person ;

(iii) The Certificate of Competency issued in favour of a person/testing engineer shall stand

cancelled if the person leaves the organization mentioned in his application ;

(iv) The institution recognized as competent person shall keep the Chief Inspector-cum-

Facilitator informed of the names, designations and qualifications of the persons or the persons

authorized by it, to carry out tests, examinations and inspections.

Date :

Place :

Signature of Chief Inspector-cum-Facilitator

404

DELHI GAZETTE : EXTRAORDINARY

PART IV]

FORM-01

[See rule 4(1)]

Application for registration of an establishment as specified in section 3

1

Name of the establishment

2

Address of the establishment

3

Nature of core activity to be carried in the establishment

4

Type of establishment

5

Labour Identification Number

6

Name and address of the employer

7

Email, mobile of employer

8

a

Maximum number of employees to be employed on any day during the year

b

Maximum number of employees were employed on any day during the last twelve

months

9

Date of commencement of activity in the establishment

10

Electric load connected (in kilowatts)

11

Constitution of establishment ( Proprietorship / partnership / limited company/

government department/ local authority/ cooperative)

12

Is building in which establishment situated own/ rented/allotted/through mutual agreement

13

Is establishment employing or will employ inter- state migrant workers?

14

National Industrial Classification Code

15

Contractor Details

a

Name and Address of Contractor

b

Number of contract labour to be engaged

c

Nature of work of contract labour

16

Particulars of fee deposited amount Rs

dated

17

Declaration by the employer:

(i)

I hereby declare that the particulars given above are true to the best of my

knowledge and belief.

(ii)

I undertake to abide by the provisions of The Occupational Safety, Health and

Working

Conditions Code 2020 and rules made there under.

Signature of Employe

FORM-02

[See rule 4 (3)]

Details of inter-state migrants employed/to be employed in an establishment

1.

Name of establishment:

2.

Address of establishment:

3.

Name and address of employer:

4.

Details of inter-state migrant workers:

[PART IV

DELHI GAZETTE : EXTRAORDINARY

405

S.

No.

Name of Inter State

Migrant Worker

Father/Husband‘s

Name

Permanent Address

(Village/ Tehsil/

District/ State)

Aadhaar

No.

Mobile

No.

Signature of Employer

FORM-03

[See rule 4(6)]

Register of Establishments

Sr.

No.

Registration

number and

date

Name and address

of the

establishment

Name, Address,

contract no. and e-mail

ID of the employer

Nature of core

activity to be under

taken in the on any

day

1

2

3

4

5

Maximum workers to be

employed

Probable date of

commencement

Date of cessation

Remarks if any

6

7

8

9

Signature of Employer

FORM-04

(See rule 6)

Notice of Commencement / Cessation of operation:

1. Registration No:

2. Name and Address of Establishment:-

3. Name & Designation of employer (who has ultimate control over the affairs of the

406

DELHI GAZETTE : EXTRAORDINARY

PART IV]

establishment :-

4. Full address to which communication relating to the establishment to be sent:-

5. Nature of work of the establishment:-

6. In case of the notice is for commencement of work the approximate duration of work:-

7. In case of cessation, the date of cessation:-

I/We hereby intimate that the work of establishment having registration No.

……………………………………………..dated …………………………………… is likely to

commence/ cease operation with effect from …………………………………………………….

(Date)/ On ………………………….. (Date)

In case of cessation of work:

I/we hereby certify that the payments of all dues to the workers employed in the

establishment have been made and the premises are kept free from storage of hazardous

chemicals and substances.

Signature of the Employer

FORM-05

[(See rule 7(4)]

Record of Medical Examination

Sr. No.

Name of Employee

Date of Employment

Age

Gender

1

2

3

4

5

Nature of

Job

Date of Medical

Examination

Results of Medical

Examination

Signature of the qualified

medical Practitioner

Signature

of

Employer

6

7

8

9

10

Signature of Employer/Manager

[PART IV

DELHI GAZETTE : EXTRAORDINARY

407

FORM-06

(See rule 8) Appointment Letter

1.

Name of the employee and date of joining:

2.

Name of employee`s father:

3.

Aadhaar Number of employee and age:

4.

UAN/ESI Number of employee:

5.

Name and address of establishment:

6.

(a) Registration number :

(b) Labour Identification Number:

7.

Designation:

8.

Skill category of employee:

9.

Wages (basic , dearness allowance):

10.

Other allowances:

11.

Avenues for achieving higher wages/position:

12.

Medical Examination details:

13.

Nature of duty:

14.

Any other information:

Signature of Employer/Manager

FORM-07

(See rule 9)

NOTICE OF ACCIDENT OR DANGEROUS OCCURRENCE

E.S.I.C. Employer‘s Code number:

1. Name of employer:

2. Address of works / premises where the accident or dangerous occurrence took place:

3. Nature of establishment and LIN:

4. Branch or department and exact place where the accident or dangerous occurrence took place:

5. Details of the injured worker, if any:

(a) Name and residential address:

(b) Age and Sex:

(c) Occupation:

(d) E.S.I.C. Number:

6. Date, shift and hour of accident or dangerous occurrence:

7. (a) Hour at which the injured person started work on the day of accident or dangerous

occurrence :

(b) Whether wages in full or part are payable to him for the day of the accident or dangerous

occurrence:

8. (a) Cause or nature of accident or dangerous occurrence

408

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(b) If caused by machinery-

(i) Give the name of machine and the part causing the accident or dangerous occurrence:

(ii) State whether it was moved by mechanical power at the time of accident or dangerous

occurrence:

(c) State exactly what the injured person was doing at the time:

9. In case the accident or dangerous occurrence took place while travelling in the employer‗s

transport, state whether –

(a) the injured person was travelling as a passenger to or from his workplace; :

(b) the injured person was travelling with the express or implied permission of his employer; :

(c) the transport is being operated by or on behalf of the employer or some other person by

whom it is provided in pursuance of arrangements made with the employer; and :

(d) the vehicle is being/not being operated in the ordinary course of public transport service :

10. Describe briefly how the accident or dangerous occurrence took place:

11. (a) Nature and extent of injury (e.g., fatal, loss of finger, fracture of leg, scald, scratch

followed by sepsis, etc.) :

12. (a) If the accident or dangerous occurrence was not fatal, state whether the injured person

was disabled for more than 48 hours :

13. (a) Physician, dispensary or hospital from whom or which the injured person received or is

receiving treatment :

I certify that to the best of my knowledge and belief the above particulars are correct in every

respect.

Signature of Employer/Manager

Date of dispatch of report:

Place:

FORM-08

(See rule 10) Notice of Disease

1.

Name of Establishment

2.

Address of Establishment

3.

Address of employer

4.

Nature of activity being carried out

5.

Particulars of worker/employee

(a)

Name

(b)

Address

(c)

Gender

(d)

Age

6.

Precise occupation of worker/employee

7.

Nature of disease from which worker/employee is suffering

Signature of Employer or Qualified Medical Practitioner

[PART IV

DELHI GAZETTE : EXTRAORDINARY

409

FORM-09

(See rule 27) Notice of periods of work

1.

Name and address of the establishment:

Registration No.:

Weekly off/Rest Day:

Period

of

work

Total No. of Men

employed

Total

No.

of

Women employed

Nature

of

Work

Remarks

Adolescent Adult

Adolescent Adult

1

2

3

4

5

6

7

Signature of Employer/Manager

FORM-10

(See Rule-28)

REGISTER OF WORKERS EMPLOYED IN AN ESTABLISHMENT, WAGES,

OVERTIME, FINE,

DEDUCTION FOR DAMAGE OR LOSS

Register of Wages, Overtime, Fine, Deduction for damage and Loss

Name of the Establishment:

Name

of

the

Employer:

Name of the Owner:

PAN/TAN

of

the

Employer:

Labour Identification Number (LIN):

Sr. no. in

Employee

Register

Name of

the

employee

Designation/

Department

Duration of Payment

of Wages

(Monthly/Fortnightly

/Weekly/Daily/Piece

rated)

Wage

Period

From-

To-

Total

no. of

days

worked

during

the

period

Total

overtime

(hours

worked or

production

in case of

piece

workers)

Rates of wages

Basic

DA

Allowances

1

2

3

4

5

6

7

8

9

10

410

DELHI GAZETTE : EXTRAORDINARY

PART IV]

Overtime

earning

Nature of

acts and

omissions

for which

fine

imposed

with date

Amount

of fine

imposed

Damage or

loss

caused to

the

employer

by neglect

or default

of the

employee

Amount of

deduction

from

wages

Total

amount

of wages

paid

Date of

Payment

Attendance

Date

Signature

11

12

13

14

15

16

17

18

19

Signature of Employer/Manager

FORM-11

(See rule 28) Muster-Roll

Name and Address of establishment:

Registation No.

Weekly off

Time of

Commencement of

work

Rest Period

Time of

Completion of

work

Sl.

No.

Name

Father‘s

Name

Nature

of Work

For the period ending………………..

Remarks

1 2 3 4 5

Signature of Employer/Manager

FORM -12

(See rule 29)

Leave with wages register

1

Name of employee

:

2

Number in Adult/Adolescent Register

:

3

Date of joining

:

4

Wage rate

:

[PART IV

DELHI GAZETTE : EXTRAORDINARY

411

5

Date of resignation/superannuation/ dismissal/death/etc. :

6

Total number of days worked during the calendar year;

:

i

January

:

ii

February

:

iii

March

:

iv

April

:

v

May

:

vi

June

:

vii

July

:

viii August

:

ix

September

:

x

October

:

xi

November

:

xii

December

:

7

Leaves earned during the year

:

8

Balance of leaves from previous year

:

9

Total number at credit in the end of year

:

10

Leaves enjoyed during the year

:

11

Leaves encashed during the year

:

12

Balance leaves at the end of the year

:

13

Remarks

:

Signature of Employer/Manager

412

DELHI GAZETTE : EXTRAORDINARY

PART IV]

FORM-13

(See rule 30)

Register of Accidents and Dangerous Occurrences

Name and Address of the establishment:

Registration No.

Date/month/year

of accident or

dangerous

occurrence

Date/month/year

of

report

to

authorities

Description

of

accident

or dangerous

occurrence

Details

of

injured/died

person ( if

any)

Date

of

return

of

injured

person

to

duty

Total

man-

hours

lost

due

to

accident

or

Dangerous

Occurrence

1

2

3

4

5

6

Signature of Employer/Manager

FORM-14

[See rule 31]

Display of Notice Board

Notice showing the name and address of the establishment, hours of work, wage period, date of

payment of such wages, details of accident and dangerous occurrence in the establishment for the

last five years, name and address of the Inspector-cum-facilitator having jurisdiction to such

establishment and date of payment of unpaid wages to such workers in English, Hindi and in the

Local Language understood by the majority of the workers.

FORM-15

(See rule 32) Annual Return

For the Year ending 31st December,

1.

Registration number of establishment:

2.

Name of establishment:

3.

Address of establishment:

4.

Name of occupier./Employer

5.

Name of the manager.

6.

type of establishment:

A. Factory [ 2w(i)/2w(ii)/81]

B. Motor transport

C. BAOC

D. Other

7.

Nature of activity

8.

NIC Code

[PART IV

DELHI GAZETTE : EXTRAORDINARY

413

9.

hazardous: MAH or Non-MAH

10.

Ownership

(a)

Public sector

(b)

Private sector

(c)

Joint sector

(d)

Co-operative sector

(e)

proprietorship

(f)

partnership

(g)

government department/local authority

11. is the establishment seasonal?

12. no. of days worked in year.

13.

(i) No. of Man-days worked during the year.

Particular

Male

Female

Total

Local

Migrant Local

Migrant Local

Migrant

Adult

Adolescent

Total

(iii)

Average number of workers employed daily (man-days worked divided by days worked)

Particular

Male

Female

Total

Local

Migrant

Local

Migrant

Local

Migrant

Adult

Adolescent

total

Particular

Male

Female

Total

Local

Migrant

Local

Migrant

Local

Migrant

Adult

Adolescent

414

DELHI GAZETTE : EXTRAORDINARY

PART IV]

14. Total No. of man-hours worked including overtime but excluding the rest interval

15.

Average number of workers per week

16.

In respect of establishments carrying on processes or operation declared dangerous

under furnish the following information

Name of the

Average number of

Number of persons dangerous process

persons employed

or operation

daily in each of the

Medically examine declared unfit carried on (See

process or operation

explanatory

given (See explanatory

Note ‗G‘)

Note ‗D‘)

Male

Female

Male

Female

1

2

3

4

5

6

(i)

(ii)

(iii) etc.

17.

In respect of establishments carrying on processes or operation declared hazardous

under section 14, furnish the following information

Name of the

Average number of

Number of persons dangerous process

persons employed

or operation

daily in each of the

Medically examine declared unfit carried on (See

process or operation

explanatory

given (See explanatory

Note ‗G‘)

Note ‗D‘)

Male

Female

Male

Female

1

2

3

4

5

6

(i)

(ii)

(iii) etc.

Leave with wages

[PART IV

DELHI GAZETTE : EXTRAORDINARY

415

particular

Total No.

of workers

No.

of

workers

entitled

for

leave

with

wages

No.

of

workers

granted leaves

No. of

workers

dismissed/

died/

discharged/left

the service

No. of workers

in respect of

whom wages

in lieu of leave

were paid

Adult

male female

Adolescent

male

female

transgender

Safety officers

Number of safety officer

Number of safety officer

required

appointed

WELFARE OFFICERS

Number of welfare officer

Number of welfare officer

required

appointed

Welfare facilities

Shelters or Rest-Rooms or Lunch-Rooms

Canteen

Ambulance Room

Type of accidentNumber of

Man-days lost

Man-days lost

Number of

Accident

In case worker

In case worker

accidents

returned to duty

returned to

covered under

during year in

duty during

MSIHC

which accident

succeeding

Rules

occurred

year in which

accident occurred

Fatal

416

DELHI GAZETTE : EXTRAORDINARY

PART IV]

Non-fatal

Dangerous occurrence total

Certified that the information furnished above is to the best of my knowledge and belief and

correct.

Signature of Employer/Manager

Date.......

Explanatory Notes :

1

The average number of workers employed daily should be calculated by dividing the

aggregate number of attendance on working days (that is, men-days worked) by the number of

working days in the year. In reckoning attendance, attendance by temporary as well as permanent

employed should be counted, and all employees should be included, whether they are employed

directly or under contractors. Attendance on separate shifts (e.g. night and day shifts) should be

counted, separately. Days on which the establishment was closed for whatever cause, and days

on which the manufacturing processes were not carried on should not be treated as working days.

Partial attendance for less than half a shift on a working day should be ignored, while attendance

for half a shift or more on such day should be treated as full attendance.

2

For seasonal establishment, the average number of workers employed during the

working season and the off-season should be given separately. Similarly the number of days worked

and average number of man hours worked per week during the working and off-season should be

given separately.

3

The average number of hours worked per week means the total actual hours

worked by all workers during the year excluding the rest intervals but including overtime work

divided by the product of total number of workers employed in the establishment during the year

and 52 weeks. In case the establishment has not worked for the whole year, the number of weeks

during which the factory worked should be used in view of the figure 52.

Every person killed or injured should be treated as one separate accident. If in one occurrence six

persons were injured or killed it should be counted as six accidents.

FORM-16

(See rules 40 and 41)

Application for grant, renewal of licence for a contractor

(i)

Whether the application is for: (a) Grant of licence (b) renewal of licence (c) work-specific

licence

[PART IV

DELHI GAZETTE : EXTRAORDINARY

417

(ii)

Name and address of the contractor (including his father‘s name in case of

individuals)

(iii)

Father`s name

(iv)

Particulars of establishment where contract labour is to be employed:

(a) Name and address of the establishment:

(b) Type of business, trade, industry, manufacture or occupation carried on in the

establishment.

Number & date of Certificate of licence of the establishment under the code.

(c) Name and address of the Principal Employer:

(v) Particulars of the Contract Labour:

(a) Nature of work in which contract labour is employed or to be employed in the

establishment:

(b) Duration of proposed contract work (give particular of proposed date of commencing

& ending)

(c) Name and address of the authorised person of Contractor at establishment

(d) Maximum number of contract labour proposed to be employed in the establishment

on any date

(e) No. of inter-state migrant workers to be employed: Fill details in Form no. 2 as

mentioned in Rule 4(3)

(vi)

Amount and particulars of Licence fee deposited:

(vii)

Amount and particulars of security deposit, if any, or requested to be adjusted:

Signature of the Applicant-Contractor

FORM-17

[See rules 40]

Government of NCT Delhi

Office of the Contract Labour Licencing Authority

Under The Occupational Safety, Health And Working Conditions Code 2020

(Licence to Contractor)

Licence No: …………

Date: ……….

Fee paid: …………..

418

DELHI GAZETTE : EXTRAORDINARY

PART IV]

Security deposited.....................

Licence is hereby granted to…………………………………………

under Section 47(1) of The Occupational Safety, Health And Working Conditions Code 2020

subject to the conditions specified in annexure.

2. This licence is for doing the work of ………………………………………...

in the establishment M/S……………………………………………………………….

3.

The number of workmen employed, as contract labour in the establishment shall not, on

any day, exceed……….

4.

This licence shall remain in force till ….......…

5.

The licence is granted subject to the conditions specified in Annexure (attached)

Place :

Date:

Signature of Licencing Authority

FORM-18

[See rules 41 & 42]

Government of NCT Delhi

Office of the Contract Labour Licencing Authority

Under The Occupational Safety, Health And Working Conditions Code 2020

(Renewal/Amendment of Contractor Licence)

Licence No: …………

Date: ……….

Fee paid: …………..

Security deposited.....................

Licence No. ………………………… issued under Section 47(1) of The Occupational Safety,

Health And Working Conditions Code 2020 to the contractor M/s ……………………… is

hereby renewed/amended as under:

1.

Licence has been renewed/amended upto ………….. for ……. maximum number of

[PART IV

DELHI GAZETTE : EXTRAORDINARY

419

workmen to be employed on any day.

Place :

Date:

Signature of Licencing Authority

FORM-19

(See Rule 42)

Application for amendment of licence for a contractor

(i)

Name and address of the contractor

(ii)

Licence number:

(iii)

Particulars of amendment:

(a)

Name

(b)

address :

(c)

Number of contractor labour to be employed/supplied

(d)

No. of interstate migrant workers to be employed : Fill details in Form no. 2 as mentioned

in Rule 4(3)

(e)

Nature of work for contractor labour to be employed/supplied

(iv)

Amount of additional Licence fee deposited:

(vi)

Amount of additional security:

Signature of the Applicant-Contract

Form- 20

[Rule-49]

Experience Certificate to Contract Labour

Reference No.-……………

Date:-

1.

Must be on letter head of contractor;

2.

Salutation or declaration ―TO WHOM SOEVER IT MAY CONCERN‖;

3.

Name of employee as per record;

4.

Period of employment (from the date of joining to date of relieving);

5.

Designation or position;

420

DELHI GAZETTE : EXTRAORDINARY

PART IV]

6.

Salary;

7.

Remarks; and

8.

Seal and signature of contractor.

FORM-21

(See rule 54)

Format of agreement

This agreement is made on this ................. of ................20..............

between Messers ................... having office at ........................ (a sole proprietary concern/a firm

registered under the Partnership Act, 1932/a Company incorporated and registered under the

Companies Act, 1956) (hereinafter referred to as the "Producer") on the first part and

Shri/Smt/Kumari

..................... son/daughter/wife of Shri .................. residing at .........

(hereinafter referred to as the "Audio Visual Worker") on the second part. The terms 'Producer' and '

Audio Visual Worker' shall include their heirs, successors, administrators and legal representatives:

Whereas the Producer is engaged in the audio visaul production as defined in section 2(e) of The

Occupational Safety, Health And Other Working Conditions Code 2020.

Whereas the said producer is desirous to engage the Audio Visual Worker in the capacity of a

.................... in the aforesaid Audio Visual production and the Audio Visual Worker accepts the

same :

Now, therefore this agreement is made as follows:

1.

That both the parties agree that the duration of this agreement shall be form the date

hereof till the completion of the Audio Visual production and this period shall not exceed.

consecutive months.

2.

That the Audio Visual worker agrees to attend studio, location or work place, as the case

may be, subject to the requirement of his previous engagement and on his confirmation, to his

respective job punctually as and when he shall be required by a written intimation by the Producer or

the person duly authorised by him in writing.

3. ........................................................................................... That inconsideration of the Audio

Visual Workers' services, as aforesaid, the Producer agrees to pay and the Audio Visual Worker

agrees to receive a sum of Rs. ............................... (Rupees .... ) payable as advance

on signing of this agreement and the balance of Rs. ................................. payable

in ......................................... equal installments.

4.

within the stipulated period and the Producer still needing the services of the

Audio Visual Worker to complete the film, the producer agrees to pay and the Audio Visual

Worker agrees to receive additional remuneration on pro-rata basis, payable in the same manner as

stated in Clause 3 above, till the completion of the Audio Visual production.

[PART IV

DELHI GAZETTE : EXTRAORDINARY

421

5.

That in case the assignment of the Audio Visual worker is completed earlier that the

period stipulated in Clauses 1 and 4 above, the producer shall settle the account of the Audio

Visual Worker and pay the remaining balance of the agreement amount in full before the

commencement of re-recording work/censor of the Audio Visual production, whichever is earlier.

6.

It is agreed by the Producer that for the purposes of this agreement,

(a)

a working day shall mean a period not exceeding eight consecutive hours (to include one

hours' break for rest and refreshments) ;

(b)

a working week shall mean a six-day week from Monday to Saturday, both inclusive, and

the Audio Visual Worker is not liable to work on Sundays and Public Holidays :

(c)

the Audio Visual worker shall not be required to work for more than five consecutive hours

without a break ; and

(d)

a period of not less than twelve hours shall elapse between the Audio Visual Worker's

release from the studio/location/work-place and the next succeeding call.

7.

That the Audio Visual Worker shall, if so required,-

(a)

attend the studios, location or work-place, as the case may be, earlier than the a scheduled

time of the shift, for preparatory work, and in that case, he/she shall be paid by the Producer

extra wages at the rate of Rs. per

hour or part thereof for such early attendance.

(b)

continue to work beyond the working day, with one hour break and in that case, he/she

shall be paid by the Producer extra wages at the rate of Rs.

................ for the work during the extended hours and refreshments, and transport facilities.

8.

That the Producer shall provide transport and food or pay travelling allowances to and fro

to report to duty and food allowance while on duty as are customary or fixed by bilateral

arrangements between the Producer's and Audio Visual Worker's representative organisations.

9.

That the Producer shall also pay for all travelling and accommodation

expenses, fares, cost of food and such other allowances as are customary when the Audio Visual

Worker is required to work on location outdoors.

10.

That the Producer shall get the Audio Visual Worker insured for any injury or damage to

his/her person including death caused by accident arising out of or in the course of his/her

employment and/or during the period of his/ her assignment under this agreement.

11.

That where the Producer is prevented from proceeding with the production of the Audio

Visual by reason of fire, riot, natural calamity, order of the public authority or any other reason

beyond his control :-

(a)

he shall be entitled to suspend the operation of this agreement during the period of

suspension of production in case the production is suspended. The producer shall serve notice in

writing of such suspension on the Audio Visual Worker and shall pay all his/her dues up to the

422

DELHI GAZETTE : EXTRAORDINARY

PART IV]

date of service of such notice. Upon resumption of work on the film, this agreement shall revive

and shall remain valid for the period stipulated in Clause I excluding the period of suspension

therefrom ; or

(b)

he shall be entitled to terminate this agreement as from the cessation of production, in case

the production ceases completely. The producer shall serve a notice in writing of such cessation on

the Audio Visual Worker and make payment of all the amount due to the Audio Visual Worker

at the time of termination.

12.

That in case if the Producer desires to terminate this agreement before the expiry of its term

for reasons other than misconduct in relation to performance of the Audio Visual Worker's duties or

of his/her unwillingness to perform the services required under this agreement, the producer shall

be entitled to do so only upon payment of the balance of the stipulated amount of the agreement.

Only after such payment to the Audio Visual Worker, the Producer shall be titled to employ another

Audio Visual Worker in his/her place.

13.

That the Producer shall have the right to terminate this agreement on ground of

misconduct on the part of the Audio Visual worker in relation to performance of his/her duties or

his/her unwillingness to perform the service required under the agreement, upon payment to the

Audio Visual completed till the date of termination of this agreement. Termination under this clause

shall not be made unless the charges of the Producer against the Audio Visual worker are proved

before a forum comprising equal number of representatives of the Producers' Organisation and the

Audio Visual workers' Organisation to which the Producer and the Audio Visual worker

respectively may belong. The decision of the forum shall be binding on both the parties. The producer

can engage another Audio Visual worker for the job towards this agreement only after the forum

has given a decision in favour of such termination and the Audio Visual worker has been paid all his

dues.

14.

That in case of premature termination of this agreement, it shall be the option of the

Producer whether or not to retain the work of the Audio Visual worker in the film and at the same

time, it shall be option of the Audio Visual worker whether or not to allow his/her name to go on

the credit titles of the Audio Visual production.

15.

That the Producer shall have the right to decide the manner of representing the Audio Visual

Worker's personality on the screen, his/her clothes, make-up and hair-style and the Audio Visual

Worker shall fully and willingly comply with the direction of the Producer in this regard, provided

that the requirements of the Producer in this respect have been notified to the Audio Visual Worker

and accepted by him/her.

16.

That the Audio Visual Worker agrees that he/she shall render his/her services to the best

of his/her ability in such manner as the Producer or, at his instance, the Director of the Audio

Visual production may direct and shall comply with all reasonable instructions that he may give

for the production of the Audio Visual production.

17.

That the Audio Visual -worker shall comply with all the regulations of the studio, location or

[PART IV

DELHI GAZETTE : EXTRAORDINARY

423

work place as the case may be.

18.

That the Producer shall not without the consent in writing of the Audio Visual Worker,

assign or transfer the benefit of this agreement to any other person.

19.

That the provisions of the Employees' Provident Funds and Miscellaneous Provisions Act,

1952 shall be applicable to this agreement.

20.

That the Producer shall not utilize the work of the Audio Visual worker in any Audio Visual

production, other than the Audio Visual production under

this agreement, without prior permission of the Audio Visual worker.

The parties have put their hands to this agreement on the date, month and year said above in the

presence of each other and in the presence of the witnesses.

1.

Witness Producer

Name Address

2.

Witness Audio Visual Worker Name

Address

FORM-22

(See rules 59, 60 and 61)

Application for grant/ renewal/ amendment of a Licence to a factory and engagement of

contractor

1.

Application for licence –

(a)

as a factory

(b)

for engagement of contractor

2.

Full name and postal address of the establishment

3.

Registration of establishment under the Code:

4.

Details of person who will be occupier/principal employer

(a)

Name

(b)

Permanent address

424

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(c)

Local address

(d)

Email

(e)

Mobile number

5.

Full name and address of the owner of the Premises or building (including the percents

Thereof)

6.

Core activity to be under taken along with details of hazardous substances as per section

2(za) of the Code.

7.

NIC code

8.

(a)

Total Number Workers to be employed in the period of licence

(b)

Total Number Workers were employed during last calendar year

9.

Particulars of Contract Labour:

(a)

Nature of work in which contract labour is employed or to be employed:

(b)

Maximum number of contract labour to be Employed on any day:

(c)

Number of Inter-State Migrants

(d)

Estimated date of commencement of each Contract work under each

contractor:

(e)

Estimated date of termination of employment of contract labour under each

contractor:

10.

Power:

Connected or proposed to be connected (in KW)

11.

Details of fee

S.No

Particular

Amount

Date a

Factory

b

Engagement of contractor

Signature of Employer/ Occupier

[PART IV

DELHI GAZETTE : EXTRAORDINARY

425

FORM-23

(See rules 59, 60 and 61)

Grant/ Renewal/ Amendment of Licence for Factory

or

Common Licence for Factory and Engaging Contract Labour

Government of Delhi

Office of Chief Inspector-cum-Facilitator under section The Occupational Safety, Health And

Working Conditions Code 2020

Licence number:

Date of issue:

Licence is granted to Shree.................(Name of Occupier) of establishment

M/s

registered under the section-3 of the code having registration

number

as below;

A.

To run as a factory in which manufacturing process

shall be carried

by employing not more than workers and power not more than HP for the purpose of The

Occupational Safety, Health And Working Conditions Code 2020 and rules made there under

This licence will remain in force from till

Fee

Date of deposit

B.

Engagement of contract labour subject to the conditions annexed to this licence as given

below;

Fee .............

Date of deposit...........

1

Maximum number of workers to be employed as contractor labour

2

Nature of activity for which contractor labour shall be engaged

Name and DSC of Chief Inspector-cum-Facilitatator

FORM-24

(See rules 6 5 , 72 and 87)

CERTIFICATE OF FITNESS FOR HAZARDOUS PROCESS OR DANGEROUS

OPERATIONS

1. Serial No.________________________

2.

I certify that I have Personally examined

(Name of person examined)

having serial Number

(In Adult Worker Register) who is

426

DELHI GAZETTE : EXTRAORDINARY

PART IV]

desirous of being employed in___________(hazardous process/ dangerous operation) in

factory______________________

3.

He is fit to be employed

4.

He

may

be

produced for further examination after a period of

5.

He has gone undergone following tests/examinations:

S.No.

Name of test/examination

remarks

6.

Remarks of medical officer:

Name and signature of medical officer

FORM- 25

(See rule 65, 72 and 87)

Health Register

S. No.

Name of

Worker

Serial

Number in

Adult

Worker

Register

Sex

Age

Date of

Employment

on present

work

Date of

leaving Or

Transferred

Or

discharge

1

2

3

4

5

6

7

Nature of

Job or

occupation

Date of

medical

examination

by medical

officer

results of

medical

examination

If

suspended

from work,

state period

of

suspension

with

detailed

reasons

Rectified

fit to

resume

duty on

(with

signature

of medical

officer)

If

certifying

of

unfitness

or

suspension

issued to

worker

Signature

with

date

of medical

officer

8

9

10

11

12

13

14

[PART IV

DELHI GAZETTE : EXTRAORDINARY

427

FORM-26

(See rule 65)

Examination of ventilation/exhaust system

1

Description of ventilation/exhaust system

2

Hood

(a)

Serial No. of Hood.

(b)

Contaminant captured.

(c)

Capture velocities (at points to be specified).

(d)

Volume exhausted at Hood.

(e)

Hood static pressure Design Actual Value

3

Total pressure drop at

(a)

Joints

(b)

Other points of system (to be specified)

4

Transport Velocity in Duct (at points alone dust to be specified)

5

Air cleaning Device.

(a)

Type used.

(b)

Velocity at inlet.

(c)

Static Pressure at inlet.

(d)

Velocity at outlet.

(e)

State Pressure at outlet.

6

Fan.

(a)

Type used.

(b)

Volume handled.

(c)

Static pressure.

(d)

Pressure drop at outlet of fan.

7

Fan Motor

(a)

…………………………………….… Type

(b)

…………………………………….. Speed and Horse Power

8

……………………………............

Particulars of Defects, if any, disclosed during test in any of the above components.

428

DELHI GAZETTE : EXTRAORDINARY

PART IV]

I certify that on this …….. day of ……. the above ventilation/Exhaust system was thoroughly

cleaned and (so far as its construction permits) made accessible for thorough examination. I further

certify that on the said date, I thoroughly examined the above dust extraction system including its

components and that the above is a true report of my examination.

Name and signature of Competent Person

FORM-27

(See rule 66)

Format of Application to the site appraisal committee

1)

Name and address of the applicant.

2)

Site Ownership Date.

2.1 Revenue details of site such as survey No., Plot No etc.

2.2. Whether the site is classified as forest and if so whether approval of the Central Government

under Section 5 of the Indian Forests Act, 1927 has been taken.

2.3. Whether the proposed site attracts the provisions of Section 3 (2) (v) of the E.P. Act., 1986,

if so the nature of the restrictions.

2.4. Local authority under whose jurisdiction the site is located.

3)

Site Plan.

3.1. Site Plan with clear identification of boundaries and total area proposed to be occupied and

showing the following details nearby the proposed site –

(a) Historical monument, if any, in the vicinity;

(b) Name of neighbouring manufacturing units and human habitats educational and training

institutions, petrol installations, storages of LPG and other hazardous substances in the vicinity

and their distances from the proposed unit;

(c) Water sources (rivers, streams, canals, dams, water filtration plants, etc.) in the vicinity;

(d) Nearest hospitals, fire-stations, civil defence stations and police stations and their distances;

(e) High tension electrical transmission lines, pipe lines for water, oil, gas or sewerage, railway

lines, road, stations, jetties and other similar installations.

3.2. Details of soil conditions and depth at which hard strata obtained.

[PART IV

DELHI GAZETTE : EXTRAORDINARY

429

3.3. contour map of the area showing nearby hillocks and difference in levels.

3.4. plot plan of the factory showing the entry and exit points, roads within, water drains, etc.

4)

Project Report.

4.1. A summary of the salient features of the project.

4.2. Status of the organisation (Govt. Semi-Government, Public or private etc.)

4.3. Maximum number of persons likely to be working in the factory.

4.4. Maximum amount of power and water requirements and source of their supply.

4.5. Block diagram of the buildings and installations, in the proposed site.

4.6. Details of housing colony, hospital, school and other infrastructural facilities proposed.

5)

Organisation structure of the proposed manufacturing unit/factory

5.1 Organisation diagrams of - proposed enterprise in general. - Health, safety and environment

protection departments and their linkage to operation and technical departments.

5.2. Proposed Health and Safety policy.

5.3. Area allocated for treatment of wastes and effluent.

5.4. Percentage outlay on safety, health and environment protection measures.

6)

Meteorological data relating to the site.

6.1. Average, minimum and maximum of. - Temperature. - Humidity. - Wind velocities. during

the previous ten years.

6.2. Seasonal variations of wind direction.

6.3. Highest water level reached during the floods in the area recorded so far.

6.4. Lightening and seismic data of the area.

7)

Communication Links.

7.1. Availability of telephone/telex/wireless and other communication facilities for outside

communication.

7.2. Internal communication facilities proposed.

8)

Manufacturing Process Information.

8.1. Process flow diagram.

8.2. Brief write up on process and technology.

8.3. Critical process parameters such as pressure build-up, temperature rise and run-away

reactions.

430

DELHI GAZETTE : EXTRAORDINARY

PART IV]

8.4. Other external effects critical to the process having safety implications, such as ingress of

moisture or water, contact with incompatible substances, sudden power failure.

8.5. Highlights of the build-in safety pollution control devices or measures/incorporated in the

manufacturing technology.

9)

Information of Hazardous Materials.

9.1. Raw materials, intermediates, products and by-products and their quantities (Enclose

Material Safety Data Sheet in respect of each hazardous substance).

9.2. Main and intermediate storages proposed for raw materials/intermediates/products/by-

products (maximum quantities to be stored at any time).

9.3. Transportation methods to be for materials inflow and outflow, their quantities and likely

routes to be followed.

9.4. Safety measures proposed for: - handling of materials. - internal and external transportation;

and. - disposal (packing & forwarding of finished products.)

10)

Information on Dispersal/Disposal of Wastes and Pollutants.

10.1. Major pollutants Transportation methods to be for materials inflow and outflow, their

quantities and likely routes to be followed. (gas, liquid, solid) their characteristics and quantities

(average and at peak loads).

10.2. Quality and quantity of solid wastes generated, method of their treatment and disposal.

10.3. Air, water and soil pollution problems anticipated and the proposed measures to control the

same, including treatment and disposal of effluents. 11. Process Hazards Information.

11)

Process Hazards Information.

11.2. Enclose a copy of report on Risk Assessment study.

11.3. Published (open or classified) reports, if any, on accident situations/occupational health

hazards or similar plants elsewhere (within or outside the country).

12)

Information of proposed safety and Occupational Health Measures.

12.1. Details of firefighting facilities and minimum quantity of water, CO2 and or other

firefighting measures needed to meet the emergencies.

12.2. Details of in-house medical facilities proposed.

13)

Information on Emergency Preparedness.

13.1. Onsite emergency plan

[PART IV

DELHI GAZETTE : EXTRAORDINARY

431

13.2. Proposed arrangements, if any, for mutual aid scheme with the group of neighbouring

factories.

14)

Any other relevant information. I certify that the information furnished above is correct to

best of my knowledge and nothing of importance has been concealed while furnishing it.

(Name and signature of the Occupier)

FORM-28

(See rule 68)

Material Safety Data Sheet

1.

CHEMICAL IDENTITY

(i)

Chemical Name

(ii)

Chemical Classification

(iii)

Synonyms Trade Name

(iv)

Formula

(v)

C.A.S. No.

(vi)

U N. No.

1. 2.

3. 4.

2.

PHYSICAL AND CHEMICAL DATA :

(i)

Boiling Range/Point oC

(ii)

Physical State Appearance

(iii)

Melting Freezing Point oC

(iv)

Vapur Pressure Odour at 350 C mm Hg

(v)

Vapur Density (Air-I) Solubility in Water at 300 C Others

(vi)

Specific Gravity Water-1

3.

FIRE AND EXPLOSION HAZARD DATA :

(i)

Flammability Yes/No

(ii)

LEL %

(iii)

UEL %

432

DELHI GAZETTE : EXTRAORDINARY

PART IV]

(iv)

Flash Point 0C

(v)

Autoignition Temperature

(vi)

TDG

(vii) Explosive

(viii) Sensitivity to impact

(ix)

Explosion Senstivity to Static Electricity

(x)

Hazardous Combustion Products

(xi)

Hazardous Polymerisation

(xii) Combustible Liquid

(xiii) Corrosion Material

(xiv) Flammable Material Oxidiser Others Pyrophoric Material Organic Peroxide

4.

REACTIVITY DATA :

(i)

Chemical Stability

(ii)

Incompatibility With other Material

(iii)

Reactivity

(iv)

Hazardous Reaction Products

5.

HEALTH HAZARD DATA :

(i)

Routes of Entry

(ii)

Effects of Exposure / Symptoms

(iii)

Emergency Treatment

(iv)

ILV (ACGIH) ppm mg/m3

(v)

STEL ppm mg/m3

(vi)

Permissible Exposure Limit ld ppm mg/m3 Odour

Threshold ppm mg/m3 50 LD

50 NFPA Hazards Signals Health Flammability Stability Special

6.

PREVENTIVE MEASURES :

(i)

Personnel Protective Equipment

(ii)

Heading and Storage

(iii)

Precautions

7.

EMERGENCY AND FIRST AID MEASURE :

(i)

FIRE EXTINGUISHING Media

(ii)

FIRE Special Procedures

[PART IV

DELHI GAZETTE : EXTRAORDINARY

433

(iii)

Unusal Hazards

(iv)

First – Aid Measures

(v)

EXPOSURE

(vi)

Antidots/ Desag

(i)

Steps to be taken SPILLS

(ii)

Waste Disposal Method

8.

ADDITIONAL INFORMATION OR REFERENCE:

9.

MANUFACTURE AND SUPPLIERS DATA :

(i)

Name of Firm

(ii)

Mailing Address

(iii)

Telephone / Telex Contact person

(iv)

Nos. Telegraphic in Emergency

(v)

Address

(vi)

Local Bodies involved

(vii)

Standard Packing

(viii)

Trameard Detail of reference

(ix)

Others

10.

DISCLAIMER

Information contained in this material data sheet is believed to be reliable but no representation

guarantee or warranties of any kind are made as to its accuracy, suitability for a particular

application or results to be obtained from them. It is up to the manufacturer / seller to ensure that

the information contained in the material safety data sheet is relevant to the product manufacture

handled or sold by him as the case may be. The Government makes, no warranties expressed or

implied in respect of the adequacy of this document for any particular purpose.

434

DELHI GAZETTE : EXTRAORDINARY

PART IV]

FORM-29

(See rule 91)

Performa for Appeal before the Appellate Authority against Order of Imposing Penalty

To,

The Appellate Authority

I undersigned with following details prefer an appeal against order of ----------------- (details

of officer imposing penalty) under section 111(2) of The Occupational Safety, Health And

Working Conditions Code 2020.

1.

Name and address of the establishment.

2.

Name of the person preferring appeal and address details

3.

Amount of penalty imposed by the officer.

4.

Ground for Appeal with supporting documents Declaration

I, hereby declare that the particulars given above are true to the best of my/our knowledge and

belief and I hereby declare that nothing has been concealed or any fact has been mis-represented in

the above calculation made by me.

Signature of person preferring appeal:

Date:

Place:

Mobile Number:

E-mail (if any):

Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064

and Published by the Controller of Publications, Delhi-110054.

GORAKHA NATH

YADAVA

Digitally signed by GORAKHA NATH

YADAVA

Date: 2025.12.17 16:23:11 +05'30'