झारखÖड गजट

असाधारण अंक

झारखÖड सरकार ɮवारा Ĥकाͧशत

24 फाãगुन, 1945 (श०)

संÉ या – 154 राँची, गुǾवार, 14 माच[, 2024 (ई०)

वन, पया[वरण एवं जलवायु पǐरवत[न ͪवभाग

--------

अͬधसूचना

2 माच[, 2024

झारखÖड वन सेवा (ǓनयुिÈत, ĤोÛनǓत एवं अÛय सेवा शत[) Ǔनयमावलȣ, 2024

सं॰-2/रा0व0से0(èथा0)-06/2013 –746/व॰प॰--भारतीय संͪवधान के अनुÍछेद 309 के परÛतुक ɮवारा Ĥदƣ

शिÈतयɉ का Ĥयोग करते हुए झारखÖड के राÏयपाल एतɮ ɮवारा झारखÖड वन सेवा मɅ ǓनयुिÈत, ĤोÛनǓत एवं

अÛय सेवा शत[ को ͪवǓनयͧमत करने हेतु Ǔनàनͧलͨखत Ǔनयमावलȣ बनाते हɇ:-

भाग-I

संͯ¢Üत नाम, ͪवèतार एवं Ĥारàभ-

(1)

यह Ǔनयमावलȣ झारखÖड वन सेवा (ǓनयुिÈत, ĤोÛनǓत एवं अÛय सेवा शत[) Ǔनयमावलȣ, 2024

कहलायेगी।

(2)

यह Ǔनयमावलȣ पूरे झारखÖड राÏय मɅ लागू होगी।

झारखÖडगजट(असाधारण) गुǾवार, 14 माच[, 2024

(3)

यह Ǔनयमावलȣ झारखÖड गजट मɅ Ĥकाशन कȧ Ǔतͬथ से Ĥवृत होगी।

पǐरभाषाएँ-इस Ǔनयमावलȣ मɅ जब तक कोई बात ͪवषय अथवा संदभ[ के ĤǓतकूल न हो –

(i)

’’राÏय’’ से अͧभĤेत है झारखÖड राÏय;

(ii)

’’सरकार’’ से अͧभĤेत है झारखÖड सरकार;

(iii)

’’आयोग’’ से अͧभĤेत है झारखÖड लोक सेवा आयोग;

(iv)

’’ͪवभाग’’से अͧभĤेत है वन, पया[वरण एवं जलवायु पǐरवत[न ͪवभाग, झारखÖड;

(v)

’’ǓनयुिÈत Ĥाͬधकार’’ से अͧभĤेत है झारखÖड सरकार।

(vi)

’’Ĥधान मुÉय वन संर¢क’’ से अͧभĤेत है, वन, पया[वरण एवं जलवायु पǐरवत[न ͪवभाग,

झारखÖड, राँची मɅ Ĥधान मुÉय वन संर¢क के पद पर पदèथाͪपत एवं वन बल के Ĥमुख के

Ǿप मɅ काय[रत पदाͬधकारȣ ;

(vii)

’’मुÉय वन संर¢क’’ से अͧभĤेत है, ¢ेğीय मुÉय वन संर¢क तथा मुÉय वन संर¢क के

समक¢ अÛय पदाͬधकारȣ;

(viii)

’’सेवा का सदèय’’ से अͧभĤेत है इस Ǔनयमावलȣ के Ĥावधानɉ के अधीन सेवा मɅ ǓनयुÈत कोई

åयिÈत िजसमɅ सहायक वन संर¢क के पद पर पूव[ से ǓनयुÈत åयिÈत भी सिàमͧलत हɉगे।

(ix)

’’सेवा’’ से अͧभĤेत है झारखÖड वन सेवा;

(x)

’’संवग[’’ से अͧभĤेत है झारखÖड वन सेवा के ͪवͧभÛन पद

(xi)

“पंचाग वष[” से अͧभĤेत है पहलȣ जनवरȣ से 31 Ǒदसंबर तक कȧ अवͬध।

संवग[ कȧ संरचना मɅ Ǔनयमावलȣ के Ǔनयम 27 मɅ राÏय वन सेवा कȧ मूल कोǑट सहायक वन संर¢क,

वरȣय सहायक वन संर¢क, वन Ĥमंडल पदाͬधकारȣ/समक¢ पद, वरȣय वन ĤमÖडल पदाͬधकारȣ एवम्

वन संर¢क के समक¢ के èतर के पदाͬधकारȣ होगɅ।

(1)

ǓनयुिÈत - झारखÖड वन सेवा के मूल कोǑट के पदɉ पर ǓनयुिÈत Ǔनàनवत् कȧ जायेगी :-

(क)

इस Ǔनयमावलȣ के भाग-II मɅ अंͩकत ĤͩĐया के अनुसार आयोग ɮवारा आयोिजत

ĤǓतयोͬगता परȣ¢ा के आधार पर सीधी भतȸ ɮवारा;

(ख)

वǐरçठ Įेणी वन ¢ेğ पदाͬधकारȣ के Ǿप मɅ काͧम[क, ĤशासǓनक सुधार तथा राजभाषा

ͪवभाग, झारखÖड के संकãप संÉया-3286 Ǒदनांक-04.04.2014 एंव समय-समय पर

यथासंशोͬधत Ǔनयमɉ के अनुसार अपनी अपेͯ¢त सेवा अवͬध पूरȣ कर चुके हɉ तथा

झारखÖड वन ¢ेğ पदाͬधकारȣ सेवा (ǓनयुिÈत, ĤोÛनǓत एवं अÛय सेवा शत[)

Ǔनयमावलȣ के अनुसार ĤोÛनǓत के योÊय पाये गये हɉ, कȧ ĤोÛनǓत ɮवारा;

झारखÖडगजट(असाधारण) गुǾवार, 14 माच[, 2024

(2)

सेवा के मूल कोǑट के कुल पदɉ कȧ संÉया के पचास ĤǓतशत पद ĤोÛनǓत से तथा पचास

ĤǓतशत पद सीधी भतȸ से भरे जायɅगे।

सेवा के पदाͬधकाǐरयɉ कȧ ĤǓतǓनयुिÈत राÏय या केÛġ सरकार के ͩकसी भी ͪवभाग अथवा उनके

अधीन बोड[, Ǔनगम, पष[द, Ĥाͬधकार सǑहत èवायƣशासी संèथाओं मɅ कȧ जा सकेगी।

आर¢ण - झारखÖड पदɉ एवं सेवाओं कȧ ǐरिÈतयɉ मɅ आर¢ण (अनुसूͬचत जाǓतयɉ, अनुसूͬचत

जनजाǓतयɉ एवं अÛय ͪपछड़े वगȾ के ͧलए) अͬधǓनयम-2001, काͧम[क, ĤशासǓनक सुधार तथा राजभाषा

ͪवभाग, झारखÖड, राँची के संकãप सं0-1072 Ǒदनांक-17.02.2009 तथा संकãप सं0-1433 Ǒदनांक-

15.02.2019 एवं राÏय सरकार ɮवारा समय-समय पर यथाͪवǑहत अɮयतन अͬधसूचना के अनुसार

आर¢ण लागू हɉगे।

भाग-II

सीधी भतȸ ɮवारा ǓनयुिÈत

(खुलȣ ĤǓतयोͬगता परȣ¢ा के माÚयम से)

राÏय सरकार सामाÛयतया Ĥ×येक वष[ कȧ पहलȣ जनवरȣ को Ǔनयम-4(2) के अनुसार ǐरिÈतयɉ कȧ

गणना करेगी। रोèटर ÈलȣयरɅस के उपरांत, राÏय सरकार, आयोग को 28/29 फरवरȣ तक ǐरिÈतयɉ कȧ

अͬधयाचना भेजेगी। अͬधयाचना कȧ ĤािÜत पर, आयोग Ĥ×येक वष[, उस रȣǓत से, िजसे वह उͬचत

समझे, ĤǓतयोͬगता परȣ¢ा का आयोजन करेगा। आयोग सीधी भतȸ ɮवारा भरȣ जानेवालȣ ǐरिÈतयɉ कȧ

अͬधयाचना के ͪवǾɮध अनुशंसा उपलÞध करायेगा।

8. (क) आयु, शै¢ͨणक अह[ƣा एवं शारȣǐरक योÊयता:-

(I)

उàमीदवार कȧ आयु अͬधयाचना वष[ कȧ पहलȣ अगèत को 21 वष[ से कम नहȣं होनी चाǑहये।

अͬधकतम उĨ सीमाः- (काͧम[क, ĤशासǓनक सुधार तथा राजभाषा ͪवभाग के संकãप संÉया-29, Ǒदनांक-

04.01.2021 ɮवारा यथा Ǔनधा[ǐरत)

(i)

अनारͯ¢त/आ॰क॰व॰

35 वष[

(ii)

अ×यÛत ͪपछड़ा वग[ (अनुसूची-1) एवं ͪपछड़ा वग[

अनुसूची-2 (पुǾष)

37 वष[

(iii)

मǑहला

{अनारͯ¢त, आ॰क॰व॰, अ×यÛत ͪपछड़ा वग[ (अनुसूची-1) एवं

ͪपछड़ा वग[ अनुसूची-2}

38 वष[

(iv)

अनुसूͬचत जनजाǓत/अनुसूͬचत जाǓत (पुǾष एवं मǑहला)

40 वष[

झारखÖडगजट(असाधारण) गुǾवार, 14 माच[, 2024

¢ैǓतज आर¢ण - मǑहला, आǑदम जनजाǓत एवं खेलकूद कोटे के ͧलए झारखÖड सरकार ɮवारा Ǔनग[त

अɮयतन संकãप/पǐरपğ Ĥभावी हɉगे।

(ii)

उàमीदवार को अÍछे èवाèØय का होना अǓनवाय[ होगा। उसे झारखÖड वन सेवा के सदèय के Ǿप मɅ

द¢तापूव[क कत[åयपालन करने मɅ बाधा डालने वालȣ शारȣǐरक ͪवकलांगता से मुÈत होना चाǑहए।

वणाɍधता, रतɋधी एवं Ýलैट फुट वाले उàमीदवार इस पद के ͧलए अयोÊय माने जायɅगे। काͧम[क,

ĤशासǓनक सुधार तथा राजभाषा ͪवभाग, झारखÖड, राँची के संकãप सं0-2249, Ǒदनांक-03.04.2018 कȧ

कंͫडका-5(ख)(ii) के तहत मǑहला, बाल ͪवकास एवं सामािजक सुर¢ा ͪवभाग, झारखÖड, राँची के पğांक-

1960, Ǒदनांक-14.07.2023 ɮवारा झारखÖड वन सेवा संवग[ के पदाͬधकाǐरयɉ कȧ ǓनयुिÈत मɅ

Ǒदåयांगजनɉ के ͧलए ¢ैǓतज आर¢ण इस शत[ के साथ ¢ांत ͩकया गया है ͩक यह exemption माğ

एकबार के ͧलए होगी।

(iii)

उàमीदवार को माÛयता ĤाÜत ͩकसी ͪवæवͪवɮयालय से एक ͪवषय यथा-कृͪष, कृͪष अͧभयांǒğकȧ,

पशुपालन एवं पशु ͬचͩक×सा ͪव£ान, वनèपǓत शाèğ, रसायन ͪव£ान, वाǓनकȧ, भूगभ[ शाèğ, गͨणत,

भौǓतकȧ, सांिÉयकȧ, जÛतु ͪव£ान, पया[वरण ͪव£ान के साथ èनातक मɅ ͩकसी एक ͪवषय के Ǿप मɅ

अथवा संबंͬधत ͪवषय मɅ ĤǓतçठा के Ǿप मɅ सिàमͧलत रहा हो अथवा ͧसͪवल, मैकेǓनकल एवं

केͧमकल मɅ अͧभयंğण ͫडĒी।

(ख)

आवेदन कȧ ĤͩĐया संयुÈत असैǓनक सेवा ĤǓतयोͬगता परȣ¢ा के अनुसार होगी।

(iv)

शारȣǐरक योÊयता हेतु Ûयूनतम मानदÖड Ǔनàनवत् ͪवǑहत ͩकये जाते है:-

अनुसूͬचत जाǓत/अनुसूͬचत जनजाǓत के उàमीदवार

अÛय कोǑट

ऊँचाई (पुǾष)

152.5 से॰मी॰

163 से॰मी॰

ऊँचाई (मǑहला)

145 से॰मी॰

150 से॰मी॰

सीना (ǒबना फुलाए) पुǾष

79 से॰मी॰ (05 से॰मी॰) फुलान

शारȣǐरक जाँच

पुǾष

04 घंटे मɅ 25 ͩक॰मी॰ पैदल चलना

मǑहला

04 घंटे मɅ 14 ͩक॰मी॰ पैदल चलना

झारखÖडगजट(असाधारण) गुǾवार, 14 माच[, 2024

आवेदन पğ के साथ उàमीदवार को Ǔनàनͧलͨखत अͧभलेख समͪप[त करना अǓनवाय[ होगा:-

(i)

Ǔनयम 8 के अधीन यथा ͪवǑहत शै¢ͨणक अह[ता का Ĥमाण पğ कȧ èव अͧभĤमाͨणत

छायाĤǓत;

(ii)

आयु Ĥमाण के Ǿप मɅ 10^th बोड[ अथवा राÏय/भारत सरकार ɮवारा माÛयता ĤाÜत इसके

समक¢ संèथा ɮवारा Ǔनग[त Ĥमाण पğ कȧ èव-अͧभĤमाͨणत छायाĤǓत;

(iii)

आर¢ण का दावा करने वाले अßयथȸ को त×संबंधी Ĥमाण पğ कȧ èव अͧभĤमाͨणत

छायाĤǓत।

10.

इस भाग के Ǔनयम 6, 8 एवं 9 मɅ यथा ͪवǑहत ͩकसी अपे¢ा के होते हुये भी, आयोग ͩकसी उàमीदवार

से उसकȧ उàमीदवारȣ एवं/अथवा उपयुÈतता के ͧलए िजसे आवæयक समझा जाये, अÛय कोई

अǓतǐरÈत Ĥमाण-पğ ͩकसी समय पर भेजने कȧ अपे¢ा कर सकेगा।

11.

ĤǓतयोͬगता परȣ¢ा के Ǔनàनͧलͨखत भाग हɉगे तथा Ǔनàन Đम मɅ आयोिजत ͩकए जायɅगे-

(क)

Ĥारंͧभक परȣ¢ा

(ख)

मुÉय ͧलͨखत परȣ¢ा

(ग)

शारȣǐरक परȣ¢ण

(घ)

सा¢ा×कार

(ड़)

ͬचͩक×सकȧय परȣ¢ण

12.

Ĥारंͧभक परȣ¢ा - अͬधयाͬचत ǐरिÈत के दस गुणा से अͬधक अßयथȸ हɉगे तो Ĥारंͧभक परȣ¢ा का

आयोजन ͩकया जायेगा जो वèतुǓनçठ Ĥकार कȧ होगी। Ĥारंͧभक परȣ¢ा माğ सामाÛय अÚययन का

होगा, जो एक पğ का होगा एवं िजसका पूणाɍक 150 अंक एवं अवͬध दो घÖटे कȧ होगी। यǑद

अͬधयाͬचत ǐरिÈत के दस गुणा अथवा उससे कम हो तो सीधे मुÉय ͧलͨखत परȣ¢ा आयोिजत कȧ जा

सकेगी या आयोग जैसा उͬचत समझे। मुÉय ͧलͨखत परȣ¢ा का पाɫयĐम (पǐरͧशçट-1) मɅ वͨण[त है।

Ĥारंͧभक परȣ¢ा मɅ अͬधयाͬचत ǐरिÈत के दस गुणा अßयͬथ[यɉ का चयन मुÉय परȣ¢ा के ͧलए ͩकया

जायेगा।

Ĥारंͧभक परȣ¢ा मɅ कोǑटवार Ûयूनतम अहताɍक Ǔनàनवत् होगा:-

सामाÛय वग[

40 ĤǓतशत

ͪपछड़ा वग[

36.5 ĤǓतशत

ͪपछड़ा वग[ एनेÈचर-1

34 ĤǓतशत

अनुसूͬचत जाǓत/जनजाǓत एवं मǑहला वग[

32 ĤǓतशत

आǑदम जनजाǓत

30 ĤǓतशत

आͬथ[क Ǿप से कमजोर वग[ (EWS)

40 ĤǓतशत

झारखÖडगजट(असाधारण) गुǾवार, 14 माच[, 2024

Ĥारंͧभक परȣ¢ा हेतु सामाÛय अÚययन का पाɫयĐम Ǔनàनवत् होगा तथा वèतुǓनçठ (Objective)

ĤकृǓत का होगा एवं Ĥ×येक Ĥæन एक अंक के हɉगे:-

ͪवषय

Ĥæनɉ कȧ संÉया

भारतीय इǓतहास एवं भारतीय राçĚȣय आÛदोलन

ii.

भारत एवं ͪवæव का भूगोल

iii.

भारतीय राजåयवèथा एवं भारत का संͪवधान

iv.

भारतीय अथ[åयवèथा

झारखÖड का इǓतहास, भूगोल, अथ[åयवèथा एवं संèकृǓत

vi.

राÏय, देश एवं ͪवæव कȧ मह×वपूण[ समसामǓयक घटनाएँ

vii.

सामाÛय ͪव£ान

कुल

150

13.

मुÉय ͧलͨखत परȣ¢ा -झारखÖड लोक सेवा आयोग के ɮवारा, ǓनयुिÈत हेतु लȣ जाने वालȣ परȣ¢ाओं के

ͧलये संचालन Ǔनयमावलȣ के अनुसार आयोग मुÉय ͧलͨखत परȣ¢ा आयोिजत करेगा। ͧलͨखत परȣ¢ा

का èवǾप Ǔनàनवत् होगाः-

परȣ¢ा के ͪवषय एवं पूणाɍक Ǔनàनवत् रहɅगे:-

सामाÛय ǑहÛदȣ-50 अंक

सामाÛय अंĒेजी-50 अंक

100 अंक Qualifying

समय

03 घंटा

सामाÛय अÚययन

पğ-I

200 अंक

समय

03 घंटा

पğ-II

200 अंक

समय

03 घंटा

वैकिãपक ͪवषय-I

पğ-I

200 अंक

समय

03 घंटा

पğ-II

200 अंक

समय

03 घंटा

वैकिãपक ͪवषय-II

पğ-I

200 अंक

समय

03 घंटा

पğ-II

200 अंक

समय

03 घंटा

सा¢ा×कार

150 अंक

कुल-

1350 अंक

झारखÖडगजट(असाधारण) गुǾवार, 14 माच[, 2024

नोट: मेधा सूची सामाÛय अÚययन एवं वैकिãपक ͪवषय मɅ तथा सा¢ा×कार मɅ ĤाÜत अंक के योग के

अनुसार होगा।

वैकिãपक ͪवषयɉ कȧ सूची तथा परȣ¢ा का पाɫयĐम पǐरͧशçट-1 पर उपलÞध है। अßयथȸ को ͩकÛहȣं

दो वैकिãपक ͪवषय का चयन करना होगा िजसकȧ परȣ¢ा लȣ जायेगी। दोनɉ वैकिãपक ͪवषयɉ मɅ 2-2

पğ हɉगे।

झारखÖड वन सेवा ĤǓतयोͬगता परȣ¢ा कȧ मुÉय परȣ¢ा के ͪवषय:-

भाषा को छोड़कर सभी ͪवषयɉ के उƣर ǑहÛदȣ या अंĒेजी मɅ Ǒदये जा सकɅ गे। Ĥ×येक ͪवषय के अंक

उसके सामने दशा[ये गये हɇ।

ͪवषय

अंक

क.

अǓनवाय[

(i) ǑहÛदȣ (माÚयͧमक èतर)

100

(ii) अंĒेजी (माÚयͧमक èतर)

ǑहÛदȣ (उƣर ǑहÛदȣ एवं देवनागरȣ ͧलͪप मɅ ͧलखे जायɅगे) के पाɫयĐम एवं अंक:-

Ǔनबंध

सं¢ेपण

åयाकरण

अंĒेजी (उƣर अंĒेजी एवं रोमन ͧलͪप मɅ ͧलखे जायɅगे) के पाɫयĐम एवं अंक:-

Essay

Comprehension -

Grammar

अह[ƣांक 30 हɉगे। ǑहÛदȣ व अंĒेजी ÈवाͧलफाɃग नेचर के हɉगे जो ͪवषयǓनçठ (Subjective) ĤकृǓत के हɉगे।

इसके अंक ͧलͨखत परȣ¢ा के कुल ĤाÜतांक मɅ नहȣं जोड़े जायɅगे। यǑद अßयथȸ अंĒेजी के Ĥæनɉ के उƣर नहȣं

दे पाते हɇ एवं ǑहÛदȣ मɅ 30 अंक ĤाÜत कर लेते हɇ तो भी वे Èवाͧलफाई हɉगे।

सामाÛय अÚययन का पाɫयĐम Ǔनàनवत् होगा तथा

ͪवषयǓनçठ (Subjective) ĤकृǓत का होगा:-

पğ-I -

200

भारतीय इǓतहास एवं भारतीय राçĚȣय आÛदोलन

ii.

भारत एवं ͪवæव का भूगोल

iii.

भारतीय राजåयवèथा एवं अथ[åयवèथा

पğ-II -

200

झारखÖडगजट(असाधारण) गुǾवार, 14 माच[, 2024

iv.

झारखÖड का इǓतहास, भूगोल, अथ[åयवèथा एवं संèकृǓत

राÏय, देश एवं ͪवæव कȧ मह×वपूण[ समसामǓयक घटनाएँ

vi.

सामाÛय ͪव£ान

ख.

ऐिÍछक ͪवषयɉ कȧ सूची (ͪवषयǓनçठ-Subjective ĤकृǓत के)

कृͪष

कृͪष अͧभयांǒğकȧ

पशुपालन एवं पशु ͬचͩक×सा ͪव£ान

वनèपǓत शाèğ

रसायन ͪव£ान

असैǓनक अͧभयंğण (Civil Engineering)

वाǓनकȧ

भू-गभ[ शाèğ

यांǒğकȧ अͧभयंğण (Mechanical Engineering)

10.

गͨणत

11.

भौǓतकȧ

12.

सांिÉयकȧ

13.

जÛतु ͪव£ान

14.

रासायǓनक अͧभयंğण (Chemical Engineering)

15.

पया[वरण ͪव£ान

परÛतु उàमीदवार को Ǔनàनͧलͨखत संयोजन को लेने कȧ अनुमǓत नहȣं दȣ जायेगी:-

(क)

कृͪष एवं कृͪष अͧभयंğण।

(ख)

कृͪष एवं वाǓनकȧ ।

(ग)

कृͪष एवं पशुपालन एवं पशु ͬचͩक×सा ͪव£ान।

(घ)

रसायन शाèğ एवं रासायǓनक अͧभयंğण।

(च)

गͨणत एवं सांिÉयकȧ।

(छ)

अͧभयंğण के ͪवषयɉ मɅ से एक से अͬधक नहȣं।

उपरोÈत मे से ͩकÛहȣं दो ͪवषयɉ का चयन ͩकया जा सकेगा, जो दो-दो पğɉ का होगा। Ĥ×येक पğ 200

अंक के हɉगे, िजसमɅ Ĥæन ͪवषयǓनçठ (Subjective) ĤकृǓत के पूछे जायɅगे। परȣ¢ा तीन घंटे कȧ होगी।

मुÉय ͧलͨखत परȣ¢ा मɅ कोǑटवार Ûयूनतम अहताɍक Ǔनàनवत् होगा:-

झारखÖडगजट(असाधारण) गुǾवार, 14 माच[, 2024

सामाÛय वग[

40 ĤǓतशत

ͪपछड़ा वग[

36.5 ĤǓतशत

ͪपछड़ा वग[ एनेÈचर-1

34 ĤǓतशत

अनुसूͬचत जाǓत/जनजाǓत एवं मǑहला वग[

32 ĤǓतशत

आǑदम जनजाǓत

30 ĤǓतशत

आͬथ[क Ǿप से कमजोर वग[ (EWS)

40 ĤǓतशत

मुÉय ͧलͨखत परȣ¢ा वैकिãपक ͪवषयɉ के अंको को जोड़कर (सामाÛय ǑहÛदȣ एवं सामाÛय अंĒेजी को

छोड़कर) समेͩकत मɅ तथा सामाÛय अÚययन के दोनɉ पğɉ के अंको को जोड़कर समेͩकत Ǿप मɅ

Ûयूनतम अह[ƣांक ĤाÜत करना अǓनवाय[ होगा। अंǓतम मेधा सूची सा¢ा×कार एवं ͧलͨखत परȣ¢ा मɅ

कुल ĤाÜत ĤाÜतांक के आधार पर तैयार ͩकया जायेगा। ÈवाͧलफाɃग पेपर के ĤाÜतांक अंǓतम मेधा

सूची मɅ नहȣं जोड़े जायɅगे।

ग.

सा¢ा×कार

150

अंक

आयोग ɮवारा सा¢ा×कार बोड[ का गठन ͩकया जायेगा। सा¢ा×कार कȧ ĤͩĐया आयोग ɮवारा Ĥचͧलत

पɮधǓत के अनुǾप लȣ जायेगी। सा¢ा×कार मɅ उपिèथत होना अǓनवाय[ होगा। सा¢ा×कार मɅ Ûयूनतम

अहताɍक ĤाÜत करना आवæयक नहȣं होगा।

14.

शारȣǐरक परȣ¢ण-ͧलͨखत परȣ¢ा मɅ सफल पाये जाने वाले उàमीदवारɉ के ͧलए Ǔनयम-8 (4)के अनुसार

एक शारȣǐरक परȣ¢ण आयोग ɮवारा आयोिजत ͩकया जायेगा। इस परȣ¢ण हेतु आयोग, यǑद उͬचत

समझे, ͪवभाग कȧ मदद ले सकेगा। आयोग के ͩकसी सदèय कȧ अÚय¢ता मɅ ͪवभागीय पदाͬधकाǐरयɉ

कȧ एक सͧमǓत इस Ĥयोजनाथ[ गǑठत कȧ जा सकेगी। यǑद कोई उàमीदवार शारȣǐरक समथ[ता

परȣ¢ण मɅ असफल होता है, तो उसे केवल ͧलͨखत परȣ¢ा मɅ ĤाÜत अंकɉ के आधार पर ǓनयुिÈत हेतु

अनुशंͧसत नहȣं ͩकया जायेगा।

15.

ͬचͩक×सीय परȣ¢ण-(1)संयुÈत ĤǓतयोͬगता परȣ¢ा के अनुसार मेͫडकल बोड[ का गठन ͧसͪवल सज[न,

रांची कȧ अÚय¢ता मɅ गǑठत मेͫडकल बोड[ से ͧलͨखत परȣ¢ा मɅ सफल पाये जाने वाले उàमीदवारɉ

का आयोग ͪवǓनिæचत Ĥपğ मɅ ͬचͩक×सीय Ĥमाण-पğ ĤाÜत कर सकेगी। आयोग ɮवारा आवæयकता

आधाǐरत एक अपीलȣय मेͫडकल बोड[ गǑठत ͩकया जायेगा। मेͫडकल बोड[ के Ǔनण[य के ͪवǽɮध

अपीलȣय मेͫडकल बोड[ के सम¢ अपील ͩकया जा सकेगा।

16.

राÏय सरकार ɮवारा Ĥेͪषत ǐरिÈतयɉ के ͧलए आयोग ɮवारा मेधा के आधार पर आर¢ण कोǑटवार ऐसे

उàमीदवारɉ कȧ सूची, जो शारȣǐरक एवं ͬचͩक×सकȧय जांच मɅ सफल हो चुके हɉ, को सेवा मɅ ǓनयुिÈत

हेतु अनुशंͧसत ͩकया जायेगा।

झारखÖडगजट(असाधारण) गुǾवार, 14 माच[, 2024

17.

Ǔनयम 16 के अधीन आयोग ɮवारा अनुशंसा माğ के कारण ͩकसी उàमीदवार को सेवा मɅ ǓनयुÈत

होने का कोई अͬधकार Ĥोɮभूत नहȣं होगा, जबतक ͩक राÏय सरकार का, ऐसी जांचोपरांत, जैसी

आवæयक समझɅ, समाधान न हो जाए ͩक उàमीदवार सेवा मɅ ǓनयुिÈत हेतु सभी Ĥकार से उपयुÈत है।

18.

अंǓतम Ǿप से चयǓनत उàमीदवार कȧ ǓनयुिÈत सहायक वन संर¢क के Ǿप मɅ 2 वष[ के ͧलये

पǐरवी¢ा पर कȧ जा सकेगी तथा उनसे राÏय सरकार/भारत सरकार ɮवारा यथावधाǐरत माÛयता ĤाÜत

संèथानɉ मɅ åयवसाǓयक Ĥͧश¢ण के साथ-साथ राÏय मɅ कत[åय Ĥͧश¢ण (On the job training) मɅ

जाने कȧ अपे¢ा कȧ जायेगी। åयवसाǓयक Ĥͧश¢ण का काय[Đम तथा इस दौरान लȣ जाने वालȣ

परȣ¢ाओं के Ĥ×येक ͪवषय का ĤाÜतांक संèथान ɮवारा Ǔनधा[ǐरत ͩकया जायेगा।

पǐरवी¢ा पर ǓनयुÈत सहायक वन संर¢कɉ के नाम संबंͬधत संèथानɉ मɅ Ǔनàनͧलͨखत

दèतावेजɉ के साथ भेज Ǒदये जायɅगे:-

(क)

पǐरवी¢ा पर ǓनयुÈत Ĥ×येक सहायक वन संर¢क के उĨ का साêय Ĥमाण पğ;

(ख)

पǐरवी¢ा पर ǓनयुÈत Ĥ×येक सहायक वन संर¢क का Ǔनयम 8 क (iii) मɅ यथा ͪवǑहत शै¢ͨणक

अह[ता का मूल Ĥमाण पğ;

(ग)

Ǔनयम 14 के अधीन ͪवǑहत Ĥपğ मɅ Ǔनग[त शारȣǐरक उपयुÈतता का Ĥमाण पğ;

19.

Ǔनयम 18 के अधीन पǐरवी¢ा पर ǓनयुÈत åयिÈत यǑद ͪवǑहत Ĥͧश¢ण सफलतापूव[क पूण[ करने मɅ

असफल रहता है तो उस åयिÈत कȧ पǐरवी¢ा-अवͬध अͬधकतम एक वष[ के ͧलये बढ़ाई जा सकती है

एवं ͩफर भी यǑद वह उÈत बढ़ाई गई अवͬध मɅ Ĥͧश¢ण को पूरा करने मɅ असफल रहता है तो

उसकȧ सेवा सàपुçट नहȣं कȧ जायेगी।

20.

(क) सेवा संपुिçट-Ǔनयम 19 के अधीन सेवा सàपुिçट के ͧलए दो वषȾ कȧ परȣêयमान अवͬध

कुशलतापूव[क पूण[ करना, तथा राजèव पष[द ɮवारा आयोिजत ͪवभागीय परȣ¢ा के यथा- ǑहÛदȣ, ͪवͬध

पğ पाट[-I पेपर-I (पुèतक रǑहत), ͪवͬध पğ पाट[-I पेपर-II (पुèतक सǑहत), ͪवͬध पğ पाट[-II पेपर-I

(पुèतक रǑहत), ͪवकास एवं पया[वरण, काय[Ĥणालȣ एवं लेखा (पुèतक सǑहत), ͩकसी एक जनजातीय

भाषा परȣ¢ा (हो, संथालȣ, कुड़ुख, मुÖडारȣ) मɅ उƣीण[ होना अǓनवाय[ होगा।

(ख)

Ĥधान मुÉय वन संर¢क कȧ अनुशंसा से ͪवभाग को समाधान हो गया हो ͩक वह सàपुçट

होने योÊय है।

(ग)

Ĥथम वेतन वृɮͬध हेतु राजèव पष[द ɮवारा आयोिजत ǑहÛदȣ कȧ परȣ¢ा मɅ उƣीण[ता अǓनवाय[

होगी। उÈत परȣ¢ा मɅ अनुƣीण[ रहने पर वेतन वृɮͬध असंचया×मक Ǿप से अवǾɮध रहेगी तथा परȣ¢ा

मɅ उƣीण[ हो जाने पर अनुमाÛय वेतन वृɮͬध देय होगी लेͩकन बकाया वेतन देय नहȣं होगा। ɮͪवतीय

वेतन वृɮͬध कȧ èवीकृǓत हेतु सेवा संपुिçट अǓनवाय[ होगी।

21.

Ǔनयम 18 के अधीन इस Ĥकार ǓनयुÈत åयिÈत, पǐरवी¢ा अवͬध के दौरान, राÏय सरकार ɮवारा

समय-समय पर, यथा पुनरȣͯ¢त सहायक वन संर¢क के पद के ͧलए यथा अनुमाÛय वेतन एवं भƣे

का हकदार होगा एवं Ǔनयम 20 के अधीन उसकȧ सेवा सàपुçट होने पर पǐरवी¢ा पर उनकȧ योगदान

कȧ Ǔतͬथ को सेवा मɅ मूल ǓनयुिÈत कȧ Ǔतͬथ मानी जायेगी और वह उÈत Ǔतͬथ से सेवा के अधीन

सभी देय पावनाओं के ͧलए हकदार होगा।

झारखÖडगजट(असाधारण) गुǾवार, 14 माच[, 2024

भाग-III

ĤोÛनǓत ɮवारा ǓनयुिÈत

22. (1) Ǔनयम 4(1) (ख) के अधीन सेवा के मूल कोǑट के पद पर वǐरçठ Įेणी वन ¢ेğ पदाͬधकाǐरयɉ कȧ

ĤोÛनǓत पर, झारखÖड लोक सेवा आयोग के अÚय¢ या सदèय कȧ अÚय¢ता मɅ गǑठत ĤोÛनǓत

सͧमǓत ɮवारा उनकȧ मेधा-सह-वरȣयता के अनुसार ͪवचार ͩकया जायेगा। ĤोÛनǓत के ͧलए ǐरिÈतयɉ

कȧ गणना Ǔनयम 4(2) के अनुसार, Ĥ×येक वष[ पहलȣ जनवरȣ को कȧ जायेगी।

(2)

ĤोÛनǓत सͧमǓत-वन, पया[वरण एवं जलवायु पǐरवत[न ͪवभाग ɮवारा अĒेͪषत दèतावेजɉ (सेवा

अͧभलेखɉ, काय[ अनुपालन एवं वाͪष[क गोपनीय अͧभयुिÈतयɉ, आरोप/Ǔनगरानीवाद, आǑद) कȧ समी¢ा के

आधार पर, ĤोÛनǓत हेतु वǐरçठ Įेणी वन ¢ेğ पदाͬधकाǐरयɉ कȧ मेधा-सह-वरȣयता के आधार पर

उपलÞध ǐरिÈत के अनुसार अनुशंसा करेगी।

23.

सेवा के मूल कोǑट के पद पर ĤोÛनǓत होनेवाले वǐरçट Įेणी वन ¢ेğ पदाͬधकाǐरयɉ कȧ ĤोÛनǓत

ͪवभाग ɮवारा Ǔनयम 22 के अधीन आयोग कȧ अनुशंसा के आधार पर स¢म Ĥाͬधकार के अनुमोदन

से कȧ जायेगी।

24.

नवĤोÛनत सहायक वन संर¢क को, राÏय सरकार/भारत सरकार ɮवारा माÛयता ĤाÜत संèथानɉ मɅ, छह

सÜताह का åयवसाǓयक/Induction Ĥͧश¢ण लेना होगा।

भाग-IV

वरȣयता

25. (1) सीधी भतȸ ɮवारा ǓनयुÈत एवं Ǔनयम 20 के अधीन सàपुçट सेवा के सदèयɉ कȧ दशा मɅ उनकȧ

आपसी वरȣयता झारखÖड लोक सेवा आयोग ɮवारा अंǓतम Ǿप से अनुशंͧसत उàमीदवारɉ के मेधांक

तथा Ǔनयम 18 के अधीन åयवसाǓयक Ĥͧश¢ण मɅ ĤाÜत अंकɉ को 75:25 के अनुपात मɅ जोड़कर कुल

ĤाÜतांक के आधार पर धाǐरत सूची के Đम मɅ Ǔनधा[ǐरत कȧ जायेगी। कुल ĤाÜतांक कȧ समानता कȧ

दशा मɅ Ĥͧश¢ण मɅ ĤाÜतांक पर वरȣयता ͪवǓनिæचत कȧ जायेगी।

(2)

उस दशा मɅ जहाँ सेवा मɅ ǓनयुÈत, एक हȣ पंचाग वष[ कȧ ǐरिÈतयɉ के ͪवǾɮव सीधी भतȸ ɮवारा एवं

ĤोÛनǓत ɮवारा ǓनयुिÈतयाँ हुई हो, वहाँ ĤोÛनत सदèय सीधी भतȸ ͩकये गये सदèय से वरȣय हɉगे।

भाग-V

वेतन

26.

इस सेवा के ͪवͧभÛन कोǑट के पदɉ का वेतनमान वहȣ होगा जो राÏय सरकार ɮवारा समय-समय पर

Ǔनधा[ǐरत कȧ जायेगी।

झारखÖडगजट(असाधारण) गुǾवार, 14 माच[, 2024

भाग-VI

ĤोÛनǓत

27.

झारखÖड वन सेवा के सदèयɉ के पदनाम एवं ĤोÛनǓत के पदसोपान ǓनàनǾपेण हɉगे:-

Đ0

सं0

पदनाम

वेतनमान

ĤǓतशत[

सहायक वन संर¢क

(मूल पद)

पी॰बी॰II Ēेड पे॰-Ǿ॰ 5400 (Level-9)

50 %

वरȣयसहायक वन संर¢क

पी॰बी॰III Ēेड पे॰-Ǿ॰ 6600 (Level-11)

22 %

वन Ĥमंडल पदाͬधकारȣ एवं

समक¢ पद

पी॰बी॰III Ēेड पे॰-Ǿ॰ 7600 (Level-12)

18 %

वरȣय वन ĤमÖडल पदाͬधकारȣ।

पी॰बी॰III Ēेड पे॰-Ǿ॰ 8700 (Level-13)

08 %

वन संर¢क एवं समक¢ पद

पी॰बी॰IV Ēेड पे॰-Ǿ॰ 8900 (Level-13A)

02 %

झारखÖड वन सेवा के Ǔनͧमƣ उपरोÈत पदɉ का कणाɍकन Ĥधान मुÉय वन संर¢क, झारखÖड, राँची कȧ

अनुशंसा पर वन, पया[वरण एवं जलवायु पǐरवत[न ͪवभाग, झारखÖड, राँची ɮवारा ͩकया जायेगा।

28.

झारखÖड वन सेवा के पदाͬधकारȣ पदसोपान के अनुǾप अÛय उÍचतर पदɉ पर पदɉ कȧ ǐरिÈत िजस

पर ĤोÛनǓत दȣ जानी हो, कȧ उपलÞधता के अनुसार Ǔनयम 27 के अधीन ĤोÛनǓत के पाğ हɉगे।

उÈत ĤोÛनǓत के पद सोपान पर ĤोÛनǓत हेतु Ûयूनतम कालावͬध काͧम[क, ĤशासǓनक सुधार तथा

राजभाषा ͪवभाग, झारखÖड, राँची ɮवारा Ǔनग[त Ĥावधान के अनुसार होगा।

29.

इस सेवा का संवग[ बल तथा संरचना राÏय सरकार ɮवारा Ǔनधा[ǐरत कȧ जाएगी एवम् Ĥ×येक 5 (पाँच)

वष[ मɅ या उससे पूव[ आवæयकतानुसार संशोͬधत कȧ जा सकेगी।

30.

(क) सेवा के ͪवͧभÛन वेतनमानɉ मɅ ĤोÛनǓत के ͧलये सदèय, राजèव पष[द, झारखÖड, राँची कȧ

अÚय¢ता मɅ ͪवभागीय ĤोÛनǓत सͧमǓत Ǔनàनवत् होगी:-

(1)

सदèय, राजèव पष[द, झारखÖड, राँची-अÚय¢

(2)

अपर मुÉय सͬचव/Ĥधान सͬचव/सͬचव, वन, पया[वरण एवं जलवायु पǐरवत[न ͪवभाग, झारखÖड, राँची-

सदèय

(3)

अपर मुÉय सͬचव/Ĥधान सͬचव/सͬचव, पय[टन, कला संèकृǓत,खेलकूद एवं युवा काय[ ͪवभाग, झारखÖड,

राँची- सदèय

(4)

Ĥधान मुÉय वन संर¢क, झारखÖड, राँची।

झारखÖडगजट(असाधारण) गुǾवार, 14 माच[, 2024

(5)

संबंͬधत Ĥशाखा के संयुÈत सͬचव/उप सͬचव से अÛयुन पदाͬधकारȣ, वन, पया[वरण एवं जलवायु

पǐरवत[न ͪवभाग, झारखÖड, राँची- सदèय

(6)

काͧम[क, ĤशासǓनक सुधार तथा राजभाषा ͪवभाग, झारखÖड, राँची के ɮवारा नाͧमत अनुसूͬचत

जाǓत/अनुसूͬचत जनजाǓत के संयुÈत संͬचव/उप सͬचव से अÛयुन पदाͬधकारȣ- सदèय

(ख)

मेधा-सह-वरȣयता के ͧसɮधांत के आधार पर सͧमǓत ͪवचारण ¢ेğ मɅ आने वाले पदाͬधकाǐरयɉ के

Ǔनàनͧलͨखत अͧभलेखɉ कȧ समी¢ा कर ͪवचार करेगी एवं अपनी अनुशंसा ͪवभाग को भेजेगी:-

(1)

ͪवभागीय परȣ¢ा (ĤोÛनत वन ¢ेğ पदाͬधकारȣ के संदभ[ मɅ)।

(2)

सेवा सàपुिçट।

(3)

Ûयूनतम कालावͬध।

(4)

सेवा èवÍछता।

(5)

पाँच वषɟ का गोपनीय चाǐरğी/APR ĤǓतवेदन।

(6)

Ǔनगरानी/लोकायुÈत èवÍछता।

(7)

अचल संपͪƣ ͪववरणी का समप[ण।

भाग-VII

Ĥकȧण[

31.

सेवा के सदèयɉ से संबंͬधत अÛय सेवाशतɏ, जो इस Ǔनयमावलȣ से आÍछाǑदत न हो, झारखÖड सेवा

संǑहता ɮवारा शाͧसत हɉगे।

32.

इस Ǔनयमावलȣ मɅ से ͩकसी Ǔनयम के Ǔनव[चन मɅ कोई संदेह कȧ Ǒदशा मɅ उसे ͪवभाग को ǓनǑद[çट

ͩकया जायेगा और िजसपर ͪवभाग का ͪवǓनæचय अंǓतम होगा।

33.

इस Ǔनयमावलȣ के Ĥावधानɉ मɅ से ͩकसी को Ĥभावी करने मɅ यǑद कोई कǑठनाई उ×पÛन हो तो

ͪवभाग राजपğ मɅ Ĥकाͧशत[ आदेश ɮवारा, इस Ǔनयमावलȣ के Ĥावधानɉ से असंगत ना हो ऐसा Ĥावधान

कर सकेगी जो कǑठनाईयɉ के Ǔनराकरण के ͧलए आवæयक या समीचीन Ĥतीत हो।

34.

अनुशासन, Ǔनयंğण एवं अपील- झारखÖड सरकारȣ सेवक (वगȸकरण, Ǔनयमावलȣ एवम् अपील

Ǔनयमावलȣ, 2016) समय-समय पर यथासंशोͬधत, के Ĥावधान अनुशासन, Ǔनयंğण एवं अपील के मामले

मɅ झारखÖड वन सेवा के सदèयɉ पर लागू हɉगे।

35.

Ǔनरसन एवं åयावृǓत-

(1)

इस Ǔनयमावलȣ के Ĥवृत होने कȧ Ǔतͬथ से, राजèव ͪवभाग कȧ अͬधसूचना संÉया-C/F-1012/55-1635-R

Ǒदनांक-30.04.1955 ɮवारा Ĥकाͧशत ǒबहार वन सेवा Ǔनयमावलȣ, 1953 समय-समय पर यथासंशोͬधत

को अंगीकृत करते हुए,ͧसवाय वैसे राÏय वन सेवा के पदाͬधकारȣ जो इस Ǔनयमावलȣ के Ĥवृत होने

वालȣ Ǔतͬथ से पूव[ से ǓनयुिÈत हुए हो और इस Ǔनयमावलȣ के Ĥवृत होने कȧ Ǔतͬथ को ĤोÛनǓत हेतु

Ǔनधा[ǐरत अह[ता धाǐरत करते हो, को सीधे वन Ĥमंडल पदाͬधकारȣ के पद पर ĤोÛनǓत दȣ जा सकेगी।

(2)

इस Ǔनरसन के होते हुये भी Ǔनरͧसत Ǔनयमावलȣ ɮवारा या उसके अधीन Ĥदƣ ͩकसी शिÈत के Ĥयोग

से ͩकया गया कोई काय[ अथवा कȧ गई कोई कार[वाई इस Ǔनयमावलȣ ɮवारा या के अधीन Ĥदƣ

शिÈतयɉ के Ĥयोग मɅ ͩकया गया या कȧ गई मानी जायेगी मानɉ यह Ǔनयमावलȣ उस Ǒदन Ĥवृत थी

िजस Ǒदन वह काय[ ͩकया गया अथवा वह कार[वाई कȧ गई थी।

झारखÖडगजट(असाधारण) गुǾवार, 14 माच[, 2024

अनुसूची-’’क’’

झारखÖड वन सेवा ĤǓतयोͬगता परȣ¢ा के ͧलए पाठयĐम । परȣ¢ा के ͧलये Ǔनàनͧलͨखत ͪवषय हɉगे। भाषा

को छोड़कर सभी ͪवषयɉ के उƣर ǑहÛदȣ या अंĒेजी मɅ Ǒदये जा सकते हɇ। Ĥ×येक ͪवषय के अंक उसके सामने

दशा[ये गये हɇ।

ͪवषय

अंक

क.

अǓनवाय[

सामाÛय अÚययन का पाɫयĐम Ǔनàनवत् होगा तथा

ͪवषयǓनçठ (Subjective) ĤकृǓत का होगा:-

पğ-I -

200

भारतीय इǓतहास एवं भारतीय राçĚȣय आÛदोलन

ii.

भारत एवं ͪवæव का भूगोल

iii.

भारतीय राजåयवèथा एवं अथ[åयवèथा

पğ-II -

200

iv.

झारखÖड का इǓतहास, भूगोल, अथ[åयवèथा एवं संèकृǓत

राÏय, देश एवं ͪवæव कȧ मह×वपूण[ समसामǓयक घटनाएँ

vi.

सामाÛय ͪव£ान

(i) ǑहÛदȣ (माÚयͧमक èतर)

100

(ii) अंĒेजी (माÚयͧमक èतर)

(Ĥ×येक के ͧलए 50 अंक एवं कुल-100 अंको के ͧलए अह[ƣांक 30 हɉगे। ǑहÛदȣ व अंĒेजी

ÈवाͧलफाɃग नेचर के हɉगे जो ͪवषयǓनçठ (Subjective) ĤकृǓत के हɉगे। इसके अंक ͧलͨखत

परȣ¢ा के कुल ĤाÜतांक मɅ नहȣं जोड़े जायɅगे।)

ख.

ऐिÍछक ͪवषयɉ कȧ सूची

कृͪष

कृͪष अͧभयांǒğकȧ

पशुपालन एवं पशु ͬचͩक×सा ͪव£ान

वनèपǓत शाèğ

रसायन ͪव£ान

असैǓनक अͧभयंğण (Civil Engineering)

वाǓनकȧ

भू-गभ[ शाèğ

यांǒğकȧ अͧभयंğण (Mechanical Engineering)

10.

गͨणत

झारखÖडगजट(असाधारण) गुǾवार, 14 माच[, 2024

11.

भौǓतकȧ

12.

सांिÉयकȧ

13.

जÛतु ͪव£ान

14.

रासायǓनक अͧभयंğण (Chemical Engineering)

15.

पया[वरण ͪव£ान

परÛतु उàमीदवार को Ǔनàनͧलͨखत संयोजन को लेने कȧ अनुमǓत नहȣं दȣ जायेगी:-

(क)

कृͪष एवं कृͪष अͧभयंğण।

(ख)

कृͪष एवं वाǓनकȧ ।

(ग)

कृͪष एवं पशुपालन एवं पशु ͬचͩक×सा ͪव£ान।

(घ)

रसायन शाèğ एवं रासायǓनक अͧभयंğण।

(च)

गͨणत एवं सांिÉयकȧ।

(छ)

अͧभयंğण के ͪवषयɉ मɅ से एक से अͬधक नहȣं।

उपरोÈत मे से ͩकÛहȣं दो ͪवषयɉ का चयन ͩकया जा सकेगा, जो दो-दो पğɉ का होगा। Ĥ×येक पğ 200 अंक के

हɉगे।

ग.

सा¢ा×कार

150

अंक

Ĥपğ ’’क’’ (Ǔनयम 17)

एकरारनामा

इस

ͪवलेख

के

ɮवारा

सबɉ

को

यह

£ात

हो

ͩक

हमलोग

.......................................

के..............................(Ĥधान बाÚयकारȣ)......................... के ..................... एवं ......................... के

.......................(ĤǓतभूǓतयɉ) संयुÈत एवं åयिÈतगत Ǿप से झारखÖड के महामǑहम राÏयपाल से

......................... Ǿपये उÈत राÏयपाल को, उनके पदोƣरवतȸ अथवा समनुदेͧशतȸ अथवा उन लोगɉ के

एटोǓन[यɉ अथवा कोई एटोनी को अदा करने हेतु आबɮव हɇ तथा उÈत भुगतान भलȣ-भांǓत एवं वाèतͪवक Ǿप

से कȧ जानी है। हमलɉग अपने को अपने उƣराͬधकाǐरयɉ, Ǔनçपादकɉ, Ĥशासकɉ एवं ĤǓतǓनͬधयɉ को आबɮव

करते हɇ तथा हमलोगɉ मɅ से Ĥ×येक åयिÈत अपने को अपने उƣराͬधकाǐरयɉ Ǔनçपादकɉ Ĥशासकɉ एवं

ĤǓतǓनͬधयɉ को Ǻढ़ता से इन ͪवलेखɉ, मुहरɉ के साथ अपने मुहरɉ मɅ आज Ǒदनांक-........................................

Ǒदन ...................... दो हजार ........................ को आबɮव होते है।

जबͩक झारखÖड के महामǑहम राÏयपाल ने अपने एवं अपने पदोƣरवतȸ एवं समनुदेͧशतȸ को

(करार मɅ तय कȧ गई शतɟ के अÚयधीन जो इसके साथ एक Ǔतͬथ मɅ एक तथा िजसके Ĥथम भाग का

..................................... करार ......................... के बीच तथा दूसरे भाग के उÈत एवं झारखÖड के

महामǑहम राÏयपाल के बीच) उÈत को वन ͪव£ान, वन काय[ एवं वन Ĥशासन से संबंͬधत सभी ͪवषयɉ को

राÏय वन सेवा महाͪवɮयालय मɅ पढ़ाने का वचन ͧलया है तो उÈत महाͪवɮयालय के Ĥधानाचाय[ ɮवारा उÈत

...................................... को पढ़ाया जाना आवæयक समझा जाना चाǑहये तथा वे इस बात पर भी सहमत

झारखÖडगजट(असाधारण) गुǾवार, 14 माच[, 2024

हुये हɇ ͩक उÈत महाͪवɮयालय मɅ उनके ठहरने के दौरान उÛहɅ .................................... Ǿपये कȧ दर से

भुगतान ͩकया जाय एवं जबͩक ǒबना ͩकसी ऐसे भƣे को जोड़े हुए इस ͧश¢ा पर वाͪष[क खच[ का आंकलन

............................. Ǿपये ĤǓत मǑहना है िजसे ͧलया जायेगा तथा इन ͪवलेखɉ के Ĥयोजन से उÈत खच[

का वाèतͪवक मानने पर एतत् ɮवारा सहमǓत हुई है तथा जबͩक उÈत .............................. को उÈत

राÏयपाल एवं उनके पदोƣरवतȸ अथवा समनुदेͧशतȸ ɮवारा ऐसी ͧश¢ा एवं वेतन देने पर ͪवचार करने का

समय उÈत ......................... ने उÈत राÏयपाल एवं उनके समनुदेͧशतȸ के साथ करार ͩकया है ͩक उÈत

महाͪवɮयालय मɅ ͧश¢ा ĤाÜत करने के बाद आवæयकतानुसार, झारखÖड सरकार, वन एवं पया[वरण ͪवभाग मɅ

कम से कम 5 वष[ तक सेवा करेगा तथा इस सàपूण[ अवͬध मɅ यह त×परतापूव[क एवं द¢तापूव[क सभी काय[

सàपÛन करेगा तथा उÈत ͪवभाग के अͬधकारȣ के Ǿप मɅ उससे अपेͯ¢त सभी काय[ सàपÛन करेगा, एवं

जबͩक उÈत राÏयपाल कȧ सहमत हुये हɇ ͩक उÈत ........................... को इस सेवा के ͧलये कम से कम

....................... ĤǓत महȣने कȧ दर से भुगतान ͩकया जायेगा बशतȶ ͩक उÈत ......................... ने उÈत

संèथान के अÚय¢ के संतोषĤद Ǿप मɅ पाɫयĐम पूरा ͩकया हो तथा वह अपने वेतन Įेणी के अनुसार

ͪवभाग के Ǔनयमɉ एवं ͪवǓनयमɉ के अधीन उस समय मɅ अͬधकाǐरयɉ को ͪवभाग ɮवारा दȣ जानेवाले वेतन,

पɅशन एवं ĤोÛनǓत का हकदार होगा होगा एवं जबͩक उÈत राÏयपाल, उनके पदोƣरवतȸ एवं समुनदेͧशतȸ को

हुए हाǓन एवं ¢Ǔत जो उÈत ............................ के अपने अÚययन को अथवा राÏयपाल उनके पदोŸ◌ारवतȸ

एवं समुनदेͧशतȸ को हुए हाǓन एवं ¢Ǔत जो पूरा करने से पूव[ हȣ बखा[èत कर Ǒदये जाने अथवा ऐसे अÚययन

को पूरा करने कȧ Ǔतͬथ से 5 वष[ बीतने से पूव[ हȣ ǒबना अनुमǓत के महाͪवɮयालय छोड़कर जाने से उÛहɅ

उÈत हाǓन एवं ¢Ǔत भुगतान पड़ सकता है, त×संबंधी सुर¢ा एवं ¢ǓतपूǓत[ ĤाÜत करने हेतु तथा उÈत

राÏयपाल उनके पदोƣरवतȸ एवं समनुदेͧशतȸ को सàपूण[ åयय (िजसमɅ उÈत को उपरोÈत महाͪवɮयालय मɅ

ͩकया जानेवाला भुगतान भी सͧमिàलत है) जो ͩक उपरोÈत राÏयपाल उनके पदोƣरवतȸ एवं समनुदेͧशतȸ

ɮवारा उÈत ...................... को उÈत महाͪवɮयालय मɅ ͧश¢ा उपलÞध कराने हेतु वहन ͩकया गया है, के

ĤǓतदाय को ĤाÜत करने के ͧलये तथा उपरोÈत भुगतान एवं ͧश¢ा पर जो उÈत .................... को एवं

महाͪवɮयालय को उÈत ................... के उÈत महाͪवɮयालय मɅ नामांकन हेतु एक शत[ के Ǿप मɅ Ǒदया

गया। यह भी करार ͩकया गया है ͩक उÈत ........................ एवं उÈत ...................... एवं उपरोÈत

ͧलͨखत एकरारनामा ͪवǑहत शतɟ के अÚयधीन ǓनçपाǑदत करɅ। अब उपरोÈत ͧलͨखत एकरारनामा अथवा

बाÚयता का शत[ यह है ͩक यǑद उÈत ................................... उस महाͪवɮयालय मɅ भलȣ-भाँǓत Ǔनçठापूव[क

एवं त×परतापूव[क अÚययन करने उसे पूरा करता है तथा उÈत वन सेवा के ͧलये अह[ता ĤाÜत करता है तथा

उस महाͪवɮयालय मɅ अÚययन काय[ पूरा करने के उपरांत आवæयकता पड़ने पर उÈत राÏयपाल, उनके

पदोƣरवतȸ एवं समनुदेͧशतȸ के झारखÖड सरकार के वन एवं पया[वरण ͪवभाग मɅ कम से कम 5 वष[ तक सेवा

देगा तथा इस सàपूण[ अवͬध के दौरान सभी काय[ त×परतापूव[क एवं द¢तापूव[क करेगा तथा उस ͪवभाग के

अͬधकारȣ के Ǿप मɅ उससे अपेͯ¢त सभी कत[åयɉ का Ǔनव[हन करेगा तथा अपने एकरारनामा एवं तɮ ɮवारा

Ǔतͬथ के करार से संतुçट करेगा और यǑद उÈत .................................. और उनमɅ से कोई एक, उनके अथवा

उनके उƣराͬधकाǐरयɉ मɅ से कोई Ǔनçपादक Ĥशासक एवं ĤǓतǓनͬध भलȣ-भाँǓत एवं स×यǓनçठा से उÈत

राÏयपाल, उनके पदोƣरवतȸ एवं समनुदेͧशतȸ को उस हाǓन एवं ¢Ǔत कȧ ĤǓत[ करेगा जो उÈत

............................ उस महाͪवɮयालय कȧ अवͬध मɅ अथवा सरकारȣ सेवा मɅ बखा[èत हो जाने अथवा ǒबना

झारखÖडगजट(असाधारण) गुǾवार, 14 माच[, 2024

अनुमǓत के ͧश¢ा सàपूण[ ͩकये ǒबना उस महाͪवɮयालय को छोड़ देने अथवा उÈत राÏयपाल, उनके पदोƣरवतȸ

अथवा समनुदेͧशतȸ कȧ सेवा को उनके सàपण[ होने कȧ Ǔतͬथ से 5 वष[ पूव[ हȣ छोड़ देने के कारण हुआ हो

तथा उपरोÈत इस Ĥकार कȧ ͩकसी भी बखा[èतगी अथवा ǒबना अनुमǓत के छोड़ देने के कारण हुआ हो तथा

उपरोÈत इस Ĥकार कȧ ͩकसी भी बखा[èतगी अथवा ǒबना अनुमǓत के छोड़ने पर उपरोÈत राÏयपाल, उनके

पदोƣरवतȸ अथवा समनुदेͧशतȸ को उÈत ............................ के उस महाͪवɮयालय मɅ हुए ͧश¢ण पर खच[

(िजसमɅ उपरोÈत ͩकये जानेवाले माͧसक खचȶ भी शाͧमल हɇ) का भी भुगतान करेगा और तब उपरोÈत ͧलͨखत

एकरारनामा शूÛय करार Ǒदया जायेगा अÛयथा वह पूरȣ माÛयता एवं ¢मता से कायम रहेगा और तब उपरोÈत

ͧलͨखत एकरारनामा शूÛय करार Ǒदया जायेगा अÛयथा वह पूरȣ माÛयता एवं ¢मात से कायम रहेगा। परÛतु

यह भी ͩक यह èपçट Ǿप से करार पाता है तथा उɮघोͪषत ͩकया जाता है ͩक यह ͪवलेख महामǑहम

राÏयपाल, झारखÖड के आदेश के अधीन उÈत ............................... के लोक कत[åय के Ǔनव[हन के ͧलये

तथा एक ऐसे काय[ के Ǿप मɅ माना एवं समझा जाता है िजसमɅ लोग भारत के ͪवधान पǐरषɮ के 1872 के

अͬधǓनयम IX कȧ धारा 74 के ता×पय[ के अधीन Ǒहतबɮव है।

इस ͪवलेख के प¢कारɉ ने गवाह के Ǿप मɅ यहाँ पर अपना हèता¢र एवं मुहर आज एवं इस वष[

Ǒदया ।

सा¢ीगण

हèता¢र

झारखÖडगजट(असाधारण) गुǾवार, 14 माच[, 2024

Ĥपğ ’’ख’’

(Ǔनयम 17)

अनुबंध

अनुबंध के ͪवषय जो ͩक आज Ǒदन ..................................... वष[ ............................ दो हजार

......................... को Ĥथम अंश तथा उÈत ɮͪवतीय अंश के ĤǓतपाãय तथा झारखÖड महामǑहम राÏयपाल

के बीच तय पाये गये। िजसके ɮवारा Ĥ×येक प¢कार ɮवारा जहाँ तक ͩक एतत् पæचात् Ǒदये गये शतɟ का

Ǔनàन Ǿप से अनुपालन ͩकया जाना है न ͩक अपनो Ĥसंͪवदा का दूसरे के साथ Ĥदश[न:-

उÈत ................................ एतɮ ɮवारा अपनी इÍछा एवं सहमǓत से राÏयपाल, उनके पदोƣरवतȸ

एवं समनुदेͧशतȸ के बीच हुए इस अनुबंध को Ǔनçपादन करके उसके ɮवारा Ĥमाͨणत करना है ͩक

उÈत.............................. महाͪवɮयालय के ........................ वष[ के पाठयĐम के सàपूण[ ͪवǑहत

अवͬध के दौरान त×परतापूव[क, Ǔनçठापूव[क अपने अÚययन का अनुसरण करेगा तथा झारखÖड सरकार

कȧ वन सेवा मɅ अह[ता हाͧसल करने के ͧलए अपने तरफ से अͬधकतम Ĥयास करेगा।

उÈत .......................... उÈत महाͪवɮयालय मɅ अपना अÚययन समाÜत करने के पæचात्

आवæयकतानुसार राÏयपाल, उनके पदोƣरवतȸ, समनुदेͧशतȸ कȧ सेवा मɅ झारखÖड सरकार के वन एवं

पया[वरण ͪवभाग के Đम मɅ कम 5 साल तक रहेगा तथा उÈत सàपूण[ अवͬध मɅ उÈत ͪवभाग के

एक अͬधकारȣ के Ǿप मɅ उससे अपेͯ¢त सभी कायȾ का Ǔनव[हन त×परतापूव[क एवं द¢तापूव[क करेगा।

राÏयपाल èवयं, उनके पदोƣरवतȸ एवं समनुदेͧशतȸ उÈत ...................................... को राÏय वन

सेवा महाͪवɮयालय मɅ वन ͪव£ान, वन काय[ एवं वन Ĥशासन से संबंͬधत सभी मामलɉ मɅ िजसे

ͪव£ान माना जाता हो तथा उÈत महाͪवɮयालय के अÚय¢ ɮवारा उÈत के ͧलये आवæयक समझा

जाय ͧश¢ा देने का वचन देते हɇ।

उस महाͪवɮयालय मɅ अÚययन के दौरान ठहरने के Đम मɅ राÏयपाल ........................ Ǿपये ĤǓत

महȣने कȧ दर से भुगतान करɅगे िजसे बढ़ाया जा सकता है बशतȶ ͩक उÈत महाͪवɮयालय के

Ĥधानाचाय[ उसके काय[ आचरण से संतुçट हɉ तथा त×पæचात् बशतȶ ͩक उÈत झारखÖड मɅ सेवा मɅ

सीधी ǓनयुिÈत हेतु लागू वत[मान Ǔनयमɉ का पालन करता हो तथा त×पæचात उÈत वन एवं पया[वरण

ͪवभाग के एक अͬधकारȣ के Ǿप मɅ Ǔनçठापूव[क एवं त×परतापूव[क कम से कम ...................... Ǿपये

ĤǓत महȣने पर सेवा देगा बशतȶ ͩक उÈत ......................... मɅ उÈत संèथान के अÚय¢ के संतोषĤद

Ǿप मɅ पाɫयĐम को पूरा ͩकया हो तथा उÈत अपने वेतन के आधार पर उÈत ͪवभाग के अͬधकारȣ

को अनुमाÛय वेतन, एवं ĤोÛनǓत से संबंͬधत सभी अͬधकार का उÈत ͪवभाग के Ǔनयम एवं ͪवǓनयमɉ

के अधीन उस समय के ͧलये हकदार होगा।

अंत मɅ, एतɮ ɮवारा यह अनुबंͬधत एवं उɮघोͪषत ͩकया जाता है ͩक राÏयपाल उनके पदोƣरवतȸ

अथवा उनके समनुदेͧशतȸ उÈत ........................ को उÈत सेवा के दौरान महाͪवɮयालय के

पाɫयĐम को पूरा करने कȧ अवͬध के दौरान उसके ɮवारा ͩकये गये ͩकसी तरह कȧ लापरवाहȣ, कत[åय

Ǔनव[हन करने मɅ असफल रहना, बीमारȣ अथवा अव£ाकाǐरता या दुःåयवहार िजसके ͧलये उÈत

महाͪवɮयालय के Ĥधानाचाय[ अथवा मुÉय वन संर¢क ɮवारा Ǔनग[त Ĥमाण पğ हȣ इस अनुबंध को

झारखÖडगजट(असाधारण) गुǾवार, 14 माच[, 2024

Ǔनरèत करने तथा उसे उस महाͪवɮयालय से बखा[èत करने अथवा उÈत ͪवभाग कȧ सेवा से बखा[èत

करने अथवा दोनɉ के ͧलये Ǔनण[या×मक साêय होगा तथा ऐसे मामले मɅ उÈत एɮ ɮवारा èवीकृत

ͩकसी भी सुͪवधा का हकदार नहȣं होगा तथा उÈत राÏयपाल, उनके पदोƣरवतȸ अथवा समनुदेͧशतȸ को

ĤǓतदाय (िजसमɅ उÈत ..................को ͩकया जानेवाला ĤǓत महȣना भुगतान जो ͩक उसे उपरोÈत

महाͪवɮयालय मɅ ठहरने के दौरान ͧमलना था) संबंधी सारे खच[ जो ͩक राÏयपाल उनके पदोƣरवतȸ

अथवा समनुदेͧशतȸ ɮवारा उÈत ..............................के ͪष¢ा के उस महाͪवɮयालय मɅ ठहरने के

दौरान खच[ सǑहत (उÈत भुगतान सǑहत) वहन ͩकया गया, Ǒदया जाना (वापस ͩकया जाना) है जो इन

ͪवलेखɉ के Ĥयोजन हेतु ͧलये जानेवाले ..................... Ǿपये हɇ।

इस अनुबंध को उÈत .................................. ɮवारा अͧभपुिçट ͩकया जाना है जब वह अपनी

åयèकता ĤाÜत कर ले ......................... इस ͪवलेख के गवाह के Ǿप मɅ उÈत प¢कारɉ ने अपने-

अपने हèता¢र एवं मुहर आज उपरोÈत ͧलͨखत वष[ को ͩकये।

गवाह

हèता¢र

Ĥपğ-ग

ͬचͩक×सा ĤǓतवेदन

ͬचͩक×सा परȣ¢क के Ǒदशा Ǔनदȶशन के ͧलये Ǔनàनͧलͨखत संकेत Ǒदये जाते हɇ:-

ऐसे ͩकसी åयिÈत को लोक सेवा मɅ Ĥवेश हेतु अयोÊय माना जायेगा जो सरकार अथवा ǓनयोÈता

Ĥाͬधकार, जैसा भी मामला हो, के संतोषĤद Ǿप मɅ यह èपçट नहȣं कर दɅ ͩक उÛहɅ ऐसी कोई बीमारȣ अथवा

शारȣǐरक गठन से संबंͬधत अèवèथता अथवा शारȣǐरक अशÈतता हो िजसके कारण वह उस सेवा के अयोÊय

हो, अथवा होनेवाला हो।

आयोग का यह Ǔनवेदन है ͩक इस तØय को समझा जाना चाǑहये ͩक उपयुÈतता के साथ भͪवçय एवं

वत[मान दोनɉ जुड़े है तथा ͬचͩक×सकȧय जांच का मुÉय उɮदेæय लगातार Ĥभावकारȣ सेवा से है तथा èथायी

ǓनयुिÈत वाले उàमीदवारɉ के मामले मɅ उनके अकाल मृ×यु होने कȧ िèथǓत मɅ उÛहɅ जãद पɅशन अथवा

भुगतान Ǒदये जाने को रोकना है। साथ हȣ साथ इस तØय पर भी गौर ͩकया जाना है ͩक एक उàमीदवार कȧ

उàमीदवारȣ को रɮद करने कȧ सलाह केवल उसके शरȣर मɅ ͩकसी लघु दोष कȧ वजह से नहȣं दȣ जानी चाǑहये

जो ͩक उसके अनवरत Ĥभावकारȣ सेवा मɅ बाधा डालता हो।

Ĥपğ भरने से पूव[ उàमीदवार से यह सुǓनिæचत कर ͧलया जाना चाǑहये ͩक Èया ͩक पूव[ मɅ ͩकसी

ͪवͬधवत गǑठत भारत सरकार के ͬचͩक×सा Ĥाͬधकार अथवा अÛयğ सरकारȣ सेवा के ͧलये उसे अयोÊय

ठहराया गया है।

(क)

उàमीदवार का कथन और उɮघोषणा

ͬचͩक×सकȧय जांच से पूव[ उàमीदवार Ǔनàन अपेͯ¢त कथन दɅ एवं उससे संलगन उɮघोषणा पर

अǓनवाय[ Ǿप से हèता¢र करɅ। उसका Úयान ͪवशेषकर Ǔनàनͧलͨखत चेतावनी पर आकृçट ͩकया जाता है:-

अपना पूरा नाम (बड़े अ¢रɉ मɅ) ͧलखɅ।

अपना उĨ एवं जÛम èथान ͧलखे।

झारखÖडगजट(असाधारण) गुǾवार, 14 माच[, 2024

Èया आप कभी छोटा चेचक, आव[तक अथवा ͩकसी अÛय बुखार, पीव सǑहत ͬगãटȣ के

अपवृɮͪव, रÈत वमन, अèथमा, फेफड़ो के सूजन, ǿदय कȧ बीमारȣ, बेहोषी का दौरा, गǑठया,

उÖडुक पुÍछ से पीͫड़त हुये हɇ?

(क)

दुघ[टना जǓनत कोई अÛय िजसमɅ पǐररोध अपेͯ¢त हो अथवा कोई ͬचͩक×सकȧय या शãय

ͬचͩक×सा अपेͯ¢त हो? शरȣर पर कोई èथायी कुĤभाव अथवा ͪवकलांगता का उãलेख करɅ।

आपका अंǓतम टȣकाकरण कब हुआ था?

Èया आप अथवा आपके कोई संबंधी यêमा, गÖडमाला, गǑठया, अèथमा, पूŝछा ͧमगȸ अथवा

पागलपन से Ēͧसत हुये हɇ?

Èया आप अ×यͬधक काय[वश अथवा ͩकसी अÛय कारणवश अधीरता से Ēͧसत हुये हɇ?

Èया आप कभी हेपेटाइǑटस या एɬस से Ēͧसत हुये हɇ?

अपने पǐरवार से संबंͬधत Ǔनàनͧलͨखत ͪववरणी को भरɅ –

ͪपता एवं माता कȧ उĨ

तथा यǑद जीͪवत हɉ तो

èवाèØय कȧ िèथǓत

ͪपता एवं माता कȧ मृ×यु

के समय उनकȧ उĨ

तथा मृ×यु का कारण

जीͪवत भाई एवं

बहन कȧ संÉया

एवं उनकȧ उĨ

मृत भाई एवं बहन

कȧ संÉया, उनकȧ उĨ

तथा मृ×यु का कारण

मɇ उɮघोषणा करता हूँ ͩक उपरोÈत सारे उƣर मेरे अͬधकतम ͪवæवास मɅ स×य एवं सहȣ है

तथा मैनɅ ͩकसी भी ऐसी सूचना को नहȣं Ǔछपाया है िजसका Ĥभाव मेरे ǓनयुिÈत पर पड़े।

उàमीदवार का हèता¢र

ǑटÜपणी:-उपरोÈत कथन कȧ यथाथ[ता के ͧलये उàमीदवार उƣरदायी होगा। जानबूझकर ͩकसी सूचना को दबाने

के उसे ǓनयुिÈत खाने के खतरे का सामना करना होगा तथा यǑद उसकȧ ǓनयुिÈत हो जाती है, तो उसे सेवा

ǓनवृǓत से संबंͬधत सभी दावे, अथवा उपादान से वंͬचत होना पडे

़

गा

।

(ख)

उàमीदवार का नाम -

ͬचͩक×सा पष[द का ĤǓतवेदन

Ĥæन

उƣर

अßयुिÈत

Èया उɮघोषणा Ĥपğ पर उàमीदवार का हèता¢र है?

Èया ͩकसी Ĥकार कȧ गलत सूचना जÛमजात उथवा अिज[त के

संबंध मɅ कोई Ĥमाण है?

झारखÖडगजट(असाधारण) गुǾवार, 14 माच[, 2024

Èया वह (èğी)/(पुǾष) दाग या धÞबे

से मुÈत है तथा वह

(èğी)/(पुǾष) अपने अंगो का सàयक Ĥयोग करता/करती है?

Èया दुब[ल èवाèØय कȧ ओर संकेत करनेवालȣ कोई संवेदनशील

अथवा पुरानी बीमारȣ का Ĥमाण है?

(क) Èया ͪवगत 5 वषȾ मɅ उàमीदवार का सफलतापूव[क

टȣकाकरण ͩकया गया है?

(ख) Èया वह कभी चेचक से Ēͧसत हुआ है? अथवा उसके ͪवǾɮव

उसकȧ ĤाकृǓत ĤǓतर¢ा हुई है?

Èया उàमीदवार संचारȣ बीमारȣ से मुÈत है?

Èया उसके तंǒğका तंğ संबंधी बीमारȣ से Ēͧसत होने के कोई

Ĥमाण है?

Èया उसकȧ सुğण शिÈत अÍछȤ है? Èया वह कान से èवèथ है?

Èया उसके आँख सहȣ है? Èया उसके रंग के Ĥ×य¢ बोध मɅ कोई

कमी है? Èया उसका Ǻिçट ¢ेğ दोषपूण[ है? Èया उàमीदवार रतɋधी से

Ēͧसत है? उसकȧ Ǻिçट तीêणता का उãलेख करɅ?

10.

Èया उàमीदवार हकलाने अथवा बोलने संबंधी अÛय गंभीर दोषɉ

से Ēͧसत है?

11.

Èया उसके हɬडी, जोड़ɉ अथवा उससे जुड़े अंगɉ से संबंͬधत कोई

बीमारȣ है?

12.

Èया उसे कोई गंभीर चम[ रोग है?

13.

Èया उसके ǿदय एवं धमǓनयाँ èवèथ है? उसके रÈतचाप का

उãलेख करɅ?

झारखÖडगजट(असाधारण) गुǾवार, 14 माच[, 2024

14.

Èया उसके अंडकोष मɅ वृɮͪव èफȧत (ͪषरा) अथवा उसे बवासीर

कȧ बीमारȣ से Ēͧसत है िजससे उसका चलना-ͩफरना कǑठन है तथा वह

अपने कत[åय का भलȣभाँǓत Ǔनव[हन करने मɅ असमथ[ है?

15.

Èया उसके æवसन तंğ के अंगɉ मɅ ͩकसी बीमारȣ का Ĥमाण है?

16.

Èया उसके पाचन तंğ के अंगɉ मɅ ͩकसी बीमारȣ के Ĥमाण है?

17.

Èया उसके दांत गंभीर Ǿप से ¢ǐरत हो गये हɇ अथवा दोषपूण[

हɇ?

18.

Èया उसे पायǐरया होने के कोई Ĥमाण है?

19.

Èया उàमीदवार हǓन[या से मुÈत है?

20.

Èया उसके जननांग कȧ बीमारȣ से Ēèत होने के कोई Ĥमाण है?

Èया उसका मूğ (1) एलबुमेन (2) सुगर से मुÈत हɇ?

21.

Èया उàमीदवार हेपेटाइǑटस एवं एɬस से मुÈत है?

22.

Èया उàमीदवार का मूğ (1) एलबुमेन (2) सुगर से मुÈत हɇ?

23.

Èया उसका मूğ सामाÛय है?

(1)

(2)

24.

Èया उàमीदवार के èवाèØय मɅ कुछ ऐसा है जो उसे अयोÊय

बना सकता है? अथवा उस सेवा के िजसका वह उàमीदवार है, के कत[åयɉ

के द¢तापूव[क Ǔनव[हन करने के अयोÊय बन सकता है?

25.

Èया आप उàमीदवार को झारखÖड वन सेवा मɅ द¢तापूव[क एवं

लगातार सेवा करने हेतु सभी Ǻिçटकोण से योÊय समझते है?

झारखÖडगजट(असाधारण) गुǾवार, 14 माच[, 2024

Ǻिçट कȧ तीêणता खुलȣ आँखɉ से चæमे के साथ, चæमे कȧ शिÈत

अशुɮवीकृत, शुɮवीकृत

दूर Ǻिçट दाǑहना आँख

दूर Ǻिçट बायां आँख

Ǔनकट Ǻिçट दाǑहना आँख

Ǔनकट Ǻिçट बायां आँख

वणाɍधता दाǑहना आँख

वणाɍधता बायां आँख

उंचाई - ǒबना जूता पहने हुये

छाती का घेरा -

(पूण[ अÛतः æवसन के बाद)

(पूण[ Ǔनः æवास के बाद)

वजनः

èथान :

अÚय¢

Ǔतͬथ :

सदèय

.......................................

सं॰ ....................................................................................................... झारखÖड वन सेवा (ǓनयुिÈत,

ĤोÛनǓत एवं अÛय सेवा शत[) Ǔनयमावलȣ, 2024 का अंĒेजी मɅ Ǔनàनͧलͨखत अनुवाद झारखÖड-राÏयपाल के

Ĥाͬधकार से इसके ɮवारा Ĥकाͧशत ͩकया जाता है जो भारतीय संͪवधान के अनुÍछेद-348 के खंड (3) के अधीन

अंĒेजी भाषा मɅ इसका Ĥाͬधकृत पाठ समझा जाएगा।

झारखÖड राÏयपाल के आदेश से,

Ĥधान सͬचव

झारखÖडगजट(असाधारण) गुǾवार, 14 माच[, 2024

Appendix-1

AGRICULTURE

PAPER-I

Ecology and its relevance to man, natural resources, their sustainable management and conservation.Physical and

social environment as factors of crop distribution and production. Climatic elements as factors of crop growth,

impact of changing environment on cropping pattern as indicators of environments. Environmental pollution and

associated hazards to crops, animals, and humans.Cropping pattern in different agro-climatic zones of the

country.Impact of high yielding and short-duration varieties on shifts in cropping pattern. Concepts of multiple

cropping, multi storey, relay and intercropping, and their importance in relation to food production. Package of

practices for production of important cereals, pulses, oil seeds, fibres, sugar, commercial and fodder crops grown

during Kharif and Rabi seasons in different regions of the country.Important features, scope and propagation of

various types of forestry plantations such as extension, social forestry, agro-forestry, and natural forests.Weeds,

their characteristics, dissemination and association with various crops; their multiplication; cultural, biological and

chemical control of weeds.Soil-physical, chemical and biological properties.Processes and factors of soil

formation.Modern classification of Indian soils, Mineral and organic constituents of soils and their role in

maintaining soil productivity.Essential plant nutrients and other beneficial elements in soils and plants. Principles of

soil fertility and its evaluation for judicious fertilizer use, integrated nutrient management. Losses of nitrogen in

soil, nitrogen-use efficiency in submerged rice soils, nitrogen fixation in soils.Fixation of phosphorus and

potassium in soils and the scope for their efficient use.Problem soils and their reclamation methods.Soil

conservation planning on watershed basis.Erosion and run-off management in hilly, foot hills, and valley lands;

processes and factors affecting them.Dry land agriculture and its problems. Technology of stabilising agriculture

production in rain fed agriculture area. Water-use efficiency in relation to crop production, criteria for scheduling

irrigations, ways and means of reducing run-off losses of irrigation water. Drip and sprinkler irrigation.Drainage of

water-logged soils, quality of irrigation water, effect of industrial effluents on soil and water pollution. Farm

management, scope, important and characteristics, farm planning. Optimum resources use and budgeting.

Economics of different types of farming systems. Marketing and pricing of agricultural inputs and outputs, price

fluctuations and their cost; role of co-operatives in agricultural economy; types and systems of farming and factors

affecting them. Agricultural extension, its importance and role, methods of evaluation of extension programmes,

socio-economic survey and status of big, small, and marginal farmers and landless agricultural labourers; farm

mechanization and its role in agricultural production and rural employment. Training programmes for extension

workers; lab to- land programmes.

PAPER-II

Cell Theory, cell structure, cell organelles and their function, cell division, nucleic acids-structure and function,

gene structure and function.Laws of heredity, their significance in plant breeding.Chromosome structure,

chromosomal aberrations, linkage and cross-over, and their significance in recombination breeding. Polyploidy,

euploid and aneuploids. Mutation-micro and macro-and their role in crop improvement.Variation, components of

variation.Heritability, sterility and incompatibility, classification and their application in crop improvement.

Cytoplasmic inheritance, sex-linked, sex influenced and sex-limited characters. History of plant breeding.Modes of

reproduction, selfing and crossing techniques. Origin and evolution of crop plants, centre of origin, law of

homologous series, crop genetic resources-conservation and utilization. Application of principles of plant breeding

to the improvement of major field crops.Pure-line selection, pedigree, mass and recurrent selections, combining

ability, its significance in plant breeding.Hybrid vigour and its exploitation, backcross method of breeding, breeding

for disease and pest resistance, role of inter-specific and inter-generic hybridization.Role of biotechnology in plant

breeding.Improved varieties, hybrids, composites of various crop plants.Seed technology, its importance.Different

kinds of seeds and their seed production and processing techniques.Role of public and private sectors in seed

production, processing and marketing in India.Physiology and its significance in agriculture.Imbibitions, surface

tension, diffusion and osmosis.Absorption and translocation of water, transpiration and water economy. Enzymes

and plant pigments; photosynthesis-modern concepts and factors affecting the process, aerobic and non-aerobic

respiration; C, C and CAM mechanisms. Carbohydrate, protein and fat metabolism.Growth and development;

photo-periodism and vernalization.Auxins, hormones, and other plant regulators and their mechanism of action and

importance in agriculture.Physiology of seed development and germination; dormancy.Climatic requirements and

cultivation of major fruits, plants, vegetable crops and flower plants; the package of practices and their scientific

basis. Handling and marketing problems of fruit and vegetables. Principal methods of preservation of important

fruits and vegetable products, processing techniques and equipment.Role of fruits and vegetables in human

nutrition.Raising of ornamental plants, and design and layout of lawns and gardens. Diseases and pests of field

vegetables, orchard and plantation crops of India.Causes and classification of plant pests and diseases.Principles of

control of plant pests and diseases Biological control of pests and diseases.Integrated pest and disease

management.Epidemiology and forecasting.Pesticides, their formulations and modes of action.Compatibility with

rhizobial inoculants.Microbial toxins.Storage pests and diseases of cereals and pulses, and their control.Food

production and consumption trends in India.National and international food policies.Production, procurement,

झारखÖडगजट(असाधारण) गुǾवार, 14 माच[, 2024

distribution and processing constraints.Relation of food production to national dietary pattern, major deficiencies of

calorie and protein.

AGRICULTURAL ENGINEERING

PAPER – I

SECTION A

1. Soil and Water Conservation :Scope of soil and water conservation. Mechanics and types of erosion, their

causes. Mechanics and types of erosion, their causes. Rainfall, runoff and sedimentation relationships and

their measurement. Soil erosion control measures - biological and engineering including stream bank

protectionvegetative barriers, contour bunds, contour trenches, contour stone walls, contour ditches, terraces,

outlets and grassed waterways. Gully control structures - temporary and permanent - design of permanent soil

conservation structures such as chute, drop and drop inlet spillways. Design of farm ponds and percolation

ponds. Principles of flood control-flood routing. Watershed Management - investigation, planning and

implementation - selection of priority areas and water shed work plan, water harvesting and moisture

conservation. Land development - leveling, estimation of 19 earth volumes and costing. Wind Erosion

process - design for shelter belts and wind brakes and their management. Forest (Conservation) Act. 2.

Aerial Photography and Remote Sensing :Basic characteristics of photographic images, interpretation

keys, equipment for interpretation, imagery interpretation for land use, geology, soil and forestry. Remote

sensing - merits and demerits of conventional and remote sensing approaches. Types of satellite images,

fundamentals of satellite image interpretation, techniques of visual and digital interpretations for soil, water

and land use management. Use of GIS in planning and development of watersheds, forests including forest

cover, water resources etc. Section B 3. Irrigation and Drainage :Sources of water for irrigation. Planning

and design of minor irrigation projects. Techniques of measuring soil moisture - laboratory and in situ, Soil-

water plant relationships. Water requirement of crops. Planning conjunctive use of surface and ground water.

Measurement of irrigation water, measuring devices - orifices, weirs and flumes. Methods of irrigation -

surface, sprinkler and drip, fertigation. Irrigation efficiencies and their estimation. Design and construction of

canals, field channels, underground pipelines, head-gates, diversion boxes and structures for road crossing.

Occurrence of ground water, hydraulics of wells, types of wells (tube wells and open wells) and their

construction. Well development and testing. Pumps-types, selection and installation. Rehabilitation of sick

and failed wells. Drainage causes of water logging and salt problem. Methods of drainage- drainage of

irrigated and unirrigated lands, design of surface, sub-surface and vertical drainage systems. Improvement

and utilization of poor quality water. Reclamation of saline and alkali soils. Economics of irrigation and

drainage systems. Use of waste water for irrigation - standards of waste water for sustained irrigation,

feasibility and economics. 4. Agricultural Structures : Site selection, design and construction of farmstead

- farm house, cattle shed, dairy bam, poultry shed, hog housing, machinery and implement shed, storage

structures for food grains, feed and forage. Design and construction of fences and farm roads. Structures for

plant environment – green houses, poly houses and shade houses. Common building materials used in

construction - timber, brick, stone, tiles, concrete etc and their properties. Water supply, drainage and

sanitation system.

PAPER-II

Section A

1. Farm Power and Machinery :Agricultural mechanization and its scope. Sources of farm power - animate

and electro-mechanical. Thermodynamics, construction and working of internal combustion engines. Fuel,

ignition, lubrication, cooling and governing system of IC engines. Different types of tractors and power

tillers. Power transmission, ground drive, power take off (p.t.o.) and control systems. Operation and

maintenance of farm machinery for primary and secondary tillage. Traction theory. Sowing transplanting and

interculture implements and tools. Plant protection equipment – spraying and dusting. Harvesting, threshing

and combining equipment. Machinery for earth moving and land development - methods and cost estimation.

Ergonomics of man-machine system. Machinery for horticulture and agro-forestry, feeds and forages.

Haulage of agricultural and forest produce. 2. Agro-energy :Energy requirements of agricultural operations

and agro-processing. Selection, installation, safety and maintenance of electric motors for agricultural

applications. Solar (thermal and photovoltoic), wind and bio-gas energy and their utilization in agriculture.

Gasification of biomass for running IC engines and for electric power generation. Energy efficient cooking

stoves and alternate cooking fuels. Distribution of electricity for agricultural and agro-industrial applications.

Section B 3. Agricultural Process Engineering :Post harvest technology of crops and its scope.

Engineering properties of agricultural produces and by-products. Unit operations - clearing grading, size

reduction, densification, concentration, drying/dehydration, evaporation, filtration, freezing and packaging of

agricultural produces and by20 products. Material handling equipment belt and screw conveyors, bucket

elevators, their capacity and power requirement. Processing of milk and dairy products - homogenization,

cream separation, pasteurization, sterilization, spray and roller drying, butter making, ice cream, cheese and

झारखÖडगजट(असाधारण) गुǾवार, 14 माच[, 2024

shrikhand manufacture. Waste and by-product utilization - rice husk, rice bran, sugarcane bagasse, plant

residues and coir pith. 4. Instrumentation and computer applications in Agricultural Engineering

:Electronic devices and their characteristics-rectifiers, amplifiers, oscillators, multivibrators. Digital circuits -

sequential and combinational system. Application of microprocessors in data acquisition and control of

agricultural engineering processesmeasurement systems for level, flow, strain, force, torque, power, pressure,

vacuum and temperature. Computers - introduction, input/output devices, central processing unit, memory

devices, operating systems, processors, keyboards and printers. Algorithms, flowchart specification,

programme translation and problem analysis in Agricultural Engineering. Multimedia and Audio-Visual aids.

ANIMAL HUSBANDRY AND VETERINARY SCIENCE

PAPER-I

1. Animal Nutrition-Energy sources, energy, metabolism and requirements for maintenance and production of

milk, meat, eggs and wool. Evaluation of feeds as sources of energy. 1.1. Trends in protein nutrition: sources

of protein metabolism and synthesis, protein quantity and quality in relation to requirements. Energy protein

ratios in ration. 1.2. Minerals in animal diet : Sources, functions, requirements and their relationship of the

basic minerals nutrients including trace elements. 1.3. Vitamins, Hormones and Growth Stimulating,

substances : Sources, functions, requirements and inter-relationship with minerals. 1.4. Advances in

Ruminant Nutrition-Dairy Cattle: Nutrients and their metabolism with reference to milk production and its

composition. Nutrient requirements for calves, heifers, dry and milking cows and buffaloes. Limitations of

various feeding systems. 1.5 Advances in Non-Ruminant Nutrition-Poultry-Nutrients and their metabolism

with reference to poultry, meat and egg production, Nutrients requirements and feed formulation and broilers

at different ages. 1.6 Advances in Non-Ruminant Nutrition-Swine-Nutrients and their metabolism with

special reference to growth and quality of meat production, Nutrient requirement and feed formulation for

baby-growing and finishing pigs. 1.7. Advances in Applied Animal Nutrition-A critical review and

evaluation of feeding experiments, digestibility and balance studies. Feeding standards and measures of food

energy. Nutrition requirements for growth, maintenance and production. Balanced rations. 2. Animal

Physiology : 2.1 Growth and Animal Production : Prenatal and postnatal growth, maturation, growth

curves, measures of growth, factors affecting growth, conformation, body composition, meat quality. 2.2

Milk Production and Reproduction and Digestion :Current status of hormonal control of mammary

development, milk secretion and milk ejection. Male and Female reproduction organ, their components and

function. Digestive organs and their functions. 2.3 Environmental Physiology : Physiological relations and

their regulation; mechanisms of adaptation, environmental factors and regulatory mechanism involved in

animal behaviour, methods of controlling climatic stress. 2.4 Semen quality :Preservation and Artificial

Insemination-Components of semen, composition of spermatozoa, chemical and physical properties of

ejaculated semen, factors affecting semen in vivo and in vitro. Factors affecting semen production and

quality preservation, composition of diluents, sperm concentration, transport of diluted semen. Deep Freezing

techniques in cows, sheep and goats, swine and poultry. Detection of estrus and time of insemination for

better conception. 21 3. Livestock Production and Management : 3.1 Commercial Dairy Farming-

Comparison of dairy farming in India with advanced countries. Dairying under fixed farming and as a

specialised farming, economic dairy farming, Starting of a dairy farm. Capital and land requirement,

organisation of the dairy farm. Procurement of goods; opportunities in dairy farming, factors determining the

efficiency of dairy animal, Herd recording, budgeting, cost of milk production; pricing policy; Personnel

Management. Developing Practical and Economic ration for dairy cattle; supply of greens throughout the

year, field and fodder requirements of Dairy Farm, Feeding regimes for day and young stock and bulls,

heifers and breeding animals, new trends in feeding young and adult stock; Feeding records. 3.2

Commercial meat, egg and wool production: Development of practical and economic rations for sheep,

goats, pigs, rabbits and poultry. Supply of greens, fodder, feeding regimens for young and mature stock. New

trends in enhancing production and management. Capital and land requirements and socio-economic concept.

3.3 Feeding and management of animals under drought, flood and other natural calamities. 4. Genetics and

Animal Breeding :Mitosis and Meiosis; Mendelian inheritance; deviations to Mendelian genetics;

Expression of genes; Linkage and crossing over; Sex determination, sex influenced and sex limited

characters; Blood groups and polymorphism; Chromosome aberrations; Gene and its structure; DNA as a

genetic material; Genetic code and protein synthesis; Recombinant DNA technology, Mutations, types of

mutations, methods for detecting mutations and mutation rate. 4.1 Population Genetics Applied to Animal

Breeding: Quantitative Vs. qualitative traits; Hardy Weinberg Law; Population Vs. individual; Gene and

genotypic frequency; Forces changing gene frequency; Random drift and small populations; Theory of path

coefficient; Inbreeding, methods of estimating inbreeding coefficient, systems of inbreeding; Effective

population size; Breeding value, estimation of breeding value, dominance and epistatic deviation; partitioning

of variation; Genotype X environment correlation and genotype X environment interaction; Role of multiple

measurements; Resemblance between relatives. 4.2 Breeding Systems : Heritability, repeatability and

genetic and phenotypic correlations, their methods of estimation and precision of estimates; Aids to selection

and their relative merits; Individual, pedigree, family and within family selection; Progeny testing; Methods

झारखÖडगजट(असाधारण) गुǾवार, 14 माच[, 2024

of selection; Construction of selection indices and their uses; Comparative evaluation of genetic gains

through various selection methods; Indirect selection and Correlated response; Inbreeding, upgrading, cross-

breeding and synthesis of brees; Crossing of inbred lines for commercial production; Selection for general

and specific combining ability; Breeding for threshold character.

Paper II

Health and Hygiene 1.1. Histology and Histological Techniques : Stains-Chemical classification of stains

used in biological work-principles of staining tissues-mordants-progressive & regressive stains-differential

staining of cytoplasmic and connective tissue elements- Methods of preparation and processing of tissues-

celloidin embedding-Freezing microtomy-Microscopy-Bright field microscope and electron microscope.

Cytologystructure of cell, organells& inclusions; cell division-cell types-Tissues and their classification-

embryonic and adult tissues-Comparative histology of organs:- vascular, Nervous, digestive, respiratory,

musculo-skeletal and urogenital systems-Endocrine glands-Integuments-sense organs. 1.2. Embryology

:Embryology of vertebrates with special reference to aves and domestic mammals-gametogenesis-

fertilization-germ layers-foetal membranes & placentation-types of placenta in domestic mammals-

Teratology-twin &twinningorganogenesis- germ layer derivatives-endodermal, mesodermal and ectodermal

derivatives. 1.3 Bovine Anatomy-Regional Anatomy: Paranasal sinuses of OX-surface anatomy of salivary

glands. Regional anatomy of infraorbital, maxillary, mandibuloalveolar, mental & coronal nerve block-

Regional anatomy of para-vertebral nerves, pudental22 nerve, median, ulnar & radial nerves-tibial, fibular

and digital nerves-Cranial nervesstructures involved in epidural anaesthesia-superficial lymph nodes-surface

anatomy of visceral organs of thoracic, abdominal and pelvic cavities-comparative features of locomotor

apparatus & their application in the biomechanics of mammalian body. 1.4 Anatomy of Fowl :Musculo-

skeletal system-functional anatomy in relation to respiration and flying, digestion and egg production. 1.5

Physiology of blood and its circulation, respiration; excretion, Endocrine glands in health and disease.

1.5.1 Blood constituents :Properties and functions-blood cell formation- Haemoglobin synthesis and

chemistry-plasma proteins production, classification and properties; coagulation of blood; Haemorrhagic

disorders-anticoagulants-blood

groups-Blood

volume-Plasma expanders-Buffer systems in blood.

Biochemical tests and their significance in disease diagnosis.1.5.2. Circulation: Physiology of heart, cardiac

cycle-heart sounds, heartbeat, electro-cardiograms, Work and efficiency of heart-effect of ions on heart

functionmetabolism of cardiac muscle, nervous and chemical regulation of heart, effect of temperature and

stress on heart, blood pressure and hypertension, Osmotic regulation, arterial pulse, vasomotor regulation of

circulation, shock. Coronary & pulmonary circulation, Blood-Brain barrier-Cerebrospinal fluid-circulation in

birds.1.5.3 Respiration :Mechanism of respiration, Transport and exchange of gasesneural control of

respiration-chemo receptors-hypoxia-respiration in birds. 1.5.4 Excretion: Structure and function of kidney-

formation of urine methods of studying renal function-renal regulation of acid-base balance; physiological

constituents of urine-renal failure-passive venous congestion-Urinary recreation in chicken-Sweat glands and

their function. Biochemical tests for urinary dysfunction. 1.5.5 Endocrine glands :Functional disorders,

their symptoms and diagnosis. Synthesis of hormones, mechanism and control of secretion-hormonal

receptors classification and function.1.6. General knowledge of pharmacology and therapeutics of drugs :

Cellular level of pharmaco-dynamics and pharmaco-kinetics-Drugs acting on fluids and electrolyte balance-

drugs acting on Autonomic nervous system-Modern concepts of anaesthesia and dissociative Anaesthetics-

Autocoids-Antimicrobials and principles of chemotherapy in microbial injections-use of hormones in

therapeutics-chemotherapy of parasitic infections-Drug and economic persons in the Edible tissues of

animalschemotherapy of Neoplastic diseases. 1.7. Veterinary Hygiene with reference to water, air and

habitation : Assessment of pollution of water, air and soil-Importance of climate in animal health-effect of

environment on animal function and performance-relationship between industrialization and animal

agriculture-animal housing requirements for specific categories of domestic animals viz. pregnant cows &

sows, milking cows, broiler birdsstress, strain & productivity in relation to animal habitation. 2. Animal

Diseases : 2.1 Pathogenesis, symptoms, postmortem lesions, diagnosis, and control of infection diseases of

cattle, pigs and poultry, horses, sheep and goats. 2.2 Etiology, symptoms, diagnosis, treatment of production

diseases of cattle, pig and poultry. 2.3 Deficiency diseases of domestic animals and birds. 2.4 Diagnosis and

treatment of nonspecific condition like impaction, Bloat, Diarrhoea, Indigestion, dehydration, stroke,

poisoning. 2.5 Diagnosis and treatment of neurological disorders. 2.6 Principles and methods of

immunization of animals against specific diseases-hard immunity-disease free zones-'zero' disease concept-

chemoprophylaxis. 2.7 Anesthesia-local, regional and general-pre-anesthetic medication, Symptoms and

surgical interference in fractures and dislocation, Hernia, choking, abomassal displacement-Caesarian

operations, Rumenotomy-Castrations. 2.8 Disease investigation techniques-Materials for laboratory

investigation- Establishment Animal Health Centres-Disease free zone. 3. Veterinary Public Health 23

3.1Zoonoses : Classification, definition; role of animals and birds in prevalence and transmission of zoonotic

diseases occupational zoonotic diseases. 3.2. Epidemiology :Principles, definition of epidemiological terms,

application of epidemiological measures in the study of diseases and disease control, Epidemiological

features of air, water and food borne infections. 3.3 Veterinary Jurisprudence : Rules and Regulations for

improvement of animal quality and prevention of animal diseases-state and control Rules for prevention of

झारखÖडगजट(असाधारण) गुǾवार, 14 माच[, 2024

animal and animal product borne diseases-S.P. C.A.-veterolegal cases-certificates- Materials and Methods of

collection of samples for veterolegal investigation. 4. Milk and Milk Products Technology : 4.1 Milk

Technology : Organization of rural milk procurement, collection and transport of raw milk. Quality, testing

and grading raw milk, Quality storage grades of whole milk, Skimmed milk and cream. Processing,

packaging, storing, distributing, marketing defects and their control and nutritive properties of the following

milks : Pasteurized, standardized, toned, double toned, sterilized, homogenized, reconstituted, recombined

and flavoured milks. Preparation of cultured milks, cultures and their management, youghurt, Dahi, Lassi and

Srikhand. Preparation of flavoured and sterlized milks. Legal standards, Sanitation requirement for clean and

safe milk and for the milk plant equipment. 4.2 Milk Products Technology : Selection of raw materials,

assembling, production, processing, storing, distributing and marketing milk products such as Butter, Ghee,

Khoa, Channa, Cheese; Condensed, evaporated, dried milk and baby food; Ice cream and Kulfi; by products;

whey products, butter milk, lactose and casein. Testing Grading, judging milk products-BIS and Agmark

specifications, legal standards, quality control nutritive properties. Packaging, processing and operational

control Costs. 5. Meat Hygiene and Technology : 5.1 Meat Hygiene : 5.1.1 Ante mortem care and

management of food animals, stunning, slaughter and dressing operations; abattoir requirements and designs;

Meat inspection procedures and judgement of carcass meat cuts-drading of carcass meat cuts-duties and

functions of Veterinarians in Wholesome meat production. 5.1.2 Hygienic methods of handling production

of meat-spoilage of meat and control measures-Post slaughter physicochemical changes in meat and factors

that influence them-quality improvement methods-Adulteration of meat and defection-Regulatory provisions

in Meat trade and Industry. 5.2. Meat Technology 5.2.1 Physical and chemical characteristics of meat-meat

emulsions-methods of preservation of meat-curing, canning, irradiation, packaging of meat and meat

products; meat products and formulations. 5.3. Byproducts :Slaughter house by products and their

utilisation-Edible and inedible byproducts-social and economic implications of proper utilisation of slaughter

house byproducts-Organ products for food and pharmaceuticals. 5.4. Poultry Products Technology

:Chemical composition and nutritive value of poultry meat, pre slaughter care and management. Slaughtering

techniques, inspection, preservation of poultry meat, and products.Legal and BIS standards.Structure,

composition and nutritive value of eggs.Microbial spoilage.Preservation and maintenance.Marketing of

poultry meat, eggs and products.5.5. Rabbit/Fur Animal farming :Care and management of rabbit meat

production. Disposal and utilization of fur and wool and recycling of waste byproducts. Grading of wool.6.

Extension :Basic philosophy, objectives, concept and principles of extension. Different Methods adopted to

educate farmers under rural conditions. Generation of technology, its transfer and feedback.Problems of

constraints in transfer of technology. Animal husbandry programmes for rural development.

BOTANY

PAPER-I

Microbiology and Plant Pathology: Viruses, bacteria, and plasmids-structure and reproduction. General

account of infection, Phytoimmunology. Applications of microbiology in agriculture, industry, medicine and

pollution control in air, soil and water. Important plant diseases caused by viruses, bacteria, mycoplasma, fungi

and nematodes. Mode of infection and dissemination.Molecular basis of infection and disease resistance/

defence.Physiology of parasitism and control measures.Fungal toxins.2. Cryptogams: Algae, Fungi,

Bryophytes, Pteridophytes-structure and reproduction from evolutonary viewpoint. Distribution of Cryptogams

in India and their economic potential.3. Phanerogams: Gymnosperms: Concept of Progymonosperms.

Classification and distribution of Gymnosperms. Salient features of Cycadales, Coniferrals and Gnetales, their

structures and reproduction. General account of Cycadofilicales, Bennettitales and Cordaitales.Angiosperms:

Systematics, anatomy, embryology, palynology and phylogeny. Comparative account of various systems of

Angiosperm Classiification. Study of angiospermic families-Magnoliaceae, Ranunculaceae, Brassicaceae

(Cruciferae), Rosaceae, Leguminosae, Euphorbiaceae, Malvaceaie, Dipterocarpaceae, Apiaceae (Umbelliferae),

Asclepiadaceae, Verbenaceae, Solanaceae, Rubiaceae, Cucurbitaceae, Asteraceae (Composite), Poaceae

(Gramineae), Arecaceae (Palmae), Liliaceae, Musaceae, Orchidaceae. Stomata and their types.Anomalous

secondary growth, Anatomy of C 3 and C 4 plants.Development of male and female gametophytes, pollination,

fertilization.Endospermits development and function.Patterns of embryo development.Polyembryony, apoxmix,

Applications of palynology.4. Plant Utility and Exploitation: Origin of cultivated plants, Vavilov's centres of

origin. Plants as sources for food, fodder, fibres, spices, beverages, drugs, narcotics, insecticides, timber, gums,

resins and dyes.Latex, cellulose Starch and their products.Perfumery.Importance of Ethnobotany in Indian

context.Energy plantation.Botanical Gardens and Herbaria.5. Morphogenesis: Totipotency, polarity, symmetry

and differentiation. Cell, tissue, organ and protoplast culture.Somatic hybrids and Cybrids.

PAPER-II

1. Cell Biology: Techniques of Cell Biology. Prokaryotic and eukaryotic cells - structural and ultra structural

details. Structure and function of extra cellular matrix or ECM (cell wall) and membranes cell adhesion,

membrane transport and vesicular transport. Structure and function of cell organelles (chloroplasts,

mitochondria, ER, ribosome's, embosoms, lissome, peroxisomes, hydrogeno-some). Nucleus, nucleolus,

nuclear pore complex. Chromatin and nucleosome. Cell signalling and cell receptors. Signal transduction

झारखÖडगजट(असाधारण) गुǾवार, 14 माच[, 2024

(G-1 proteins, etc.). Mitosis and meisdosis; molecular basis of cell cycle. Numerical and structural

variations in chromosomes and their significance. Study of polygene, lamp brush and B-chromosomes-

structure, behaviour and significance. 2. Genetics, Molecular Biology and Evolution: Development of

genetics, and gene versus allele concepts (Pseudo alleles). Quantitative genetics and multiple factors.

Linkage and crossing over-methods of gene mapping including molecular maps (idea of mapping function).

Sex chromosomes and sex linked inheritance, sex determination and molecular basis of sex differentiation.

Mutation (biochemical and molecular basis). Cytoplasmic inheritance and cytoplasmic genes (including

genetics of male sterility). Prions and prion hypothesis. Structure and synthesis of nucleic acids and

proteins. Genetic code and regulation of gene expression. Multigene families. Organic evolution-evidences,

mechanism and theories. Role of RNA in origin and evolution. 25 3. Plant Breeding, Biotechnology and

Biostatistics: Methods of plant breedingintroduction, selection and hybridization (pedigree, backcross, mass

selection, bulk method). Male sterility and heterosis breeding. Use of apomixes in plant breeding. Micro

propagation and genetic engineering-methods of transfer of genes and transgenic crops; development and

use of molecular markers in plant breeding. Standard deviation and coefficient of variation (CV). Tests of

significance (Z-test, t-test and chi-square tests). Probability and distributions (normal, binomial and Poisson

distributions). Correlation and regression. 4. Physiology and Biochemistry: Water relations, Mineral

nutrition

and

ion

transport,

mineral

deficiencies.

Photosynthesis-photochemical

reactions,

photophosphorylation and carbon pathways including C pathway (photorespiration), C, C and CAM

pathways. Respiration (anaerobic and aerobic, including fermentationelectron transport chain and oxidative

phosphorylation. Chemiosmotic theory and ATP synthesis. Nitrogen fixation and nitrogen metabolism.

Enzymes, coenzymes, energy transfer and energy conservation. Importance of secondary metabolites.

Pigments as photoreceptors (plastidial pigments and phytochrome). Photoperiodism and flowering,

vernalization, senescence. Growth substances-their chemical nature, role and applications in agri-

horticulture, growth indices, growth movements. Stress physiology (heat, water, salinity, metal). Fruit and

seed physiology. Dormancy, storage and germination of seed. Fruit ripening -- its molecular basis and

manipulation. 5. Ecology and Plant Geography: Ecological factors. Concepts and dynamics of

community. Plant succession. Concepts of biosphere. Ecosystems and their conservation. Pollution and its

control (including phytoremediation). Forest types of India -- afforestation, deforestation and social forestry.

Endangered plants, endemism and Red Data Books. Bio-diversity. Convention of Biological Diversity,

Sovereign Rights and Intellectual Property Rights. Biogeochemical cyeles. Global warming.

CHEMISTRY

PAPER-I

1. Atomic structure Quantum theory, Heisenberg's uncertainty principle, Schrödinger wave equation (time

independent). Interpretation of wave function, particle in one-dimensional box, quantum numbers, hydrogen

atom wave functions. Shapes of s, p and d orbitals. 2. Chemical bonding Ionic bond, characteristics of ionic

compounds, factors affecting stability of ionic compounds, lattice energy, Born-Haber cycle; covalent bond

and its general characteristics, polarities of bonds in molecules and their dipole moments. Valence bond

theory, concept of resonance and resonance energy. Molecular orbital theory (LCAO method); bonding in

homonuclear molecules: H2+, H2 to Ne2, NO, CO, HF, CN, CN-, BeH2 and CO2. Comparison of valence

bond and molecular oribtal theories, bond order, bond strength and bond length. 3. SOLID STATE Forms of

solids, law of constancy of interfacial angles, crystal systems and crystal classes (crystallographic groups).

Designation of crystal faces, lattice structures and unit cell. Laws of rational indices. Bragg's law. X-ray

diffraction by crystals. Close packing, radius ratio rules, calculation of some limiting radius ratio values.

Structures of NaCl, ZnS, CsCl, CaF2, CdI2 and rutile. Imperfections in crystals, stoichiometric and non-

stoichiometric defects, impurity defects, semi-conductors. Elementary study of liquid crystals. 4. The

gaseous state Equation of state for real gases, intermolecular interactions, liquification of gases and critical

phenomena, Maxwell's distribution of speeds, intermolecular collisions, collisions on the wall and effusion. 5.

Thermodynamics and statistical thermodynamics Thermodynamic systems, states and processes, work,

heat and internal energy; first law of thermodynamics, work done on the systems and heat absorbed in

different types of processes; calorimetry, energy and enthalpy changes in various processes and their

temperature dependence. 26 Second law of thermodynamics; entropy as a state function, entropy changes in

various process, entropy-reversibility and irreversibility, Free energy functions; criteria for equilibrium,

relation between equilibrium constant and thermodynamic quantities; Nernst heat theorem and third law of

thermodynamics. Micro and macro states; canonical ensemble and canonical partition function; electronic,

rotational and vibrational partition functions and thermodynamic quantities; chemical equilibrium in ideal gas

reactions. 6. Phase equilibria and solutions Phase equilibria in pure substances; Clausius-Clapeyron

equation; phase diagram for a pure substance; phase equilibria in binary systems, partially miscible liquids-

upper and lower critical solution temperatures; partial molar quantities, their significance and determination;

excess thermodynamic functions and their determination. 7. Electrochemistry Debye-Huckel theory of

strong electrolytes and Debye-Huckel limiting Law for various equilibrium and transport properties. Galvanic

cells, concentration cells; electrochemical series, measurement of e.m.f. of cells and its applications fuel cells

झारखÖडगजट(असाधारण) गुǾवार, 14 माच[, 2024

and batteries. Processes at electrodes; double layer at the interface; rate of charge transfer, current density;

overpotential; electroanalytical techniques-voltametry, polarography, amperometry, cyclic-voltametry, ion

selective electrodes and their use. 8. Chemical kinetics Concentration dependence of rate of reaction;

defferential and integral rate equations for zeroth, first, second and fractional order reactions. Rate equations

involving reverse, parallel, consecutive and chain reactions; effect of temperature and pressure on rate

constant. Study of fast reactions by stop-flow and relaxation methods. Collisions and transition state theories.

9. Photochemistry Absorption of light; decay of excited state by different routes; photochemical reactions

between hydrogen and halogens and their quantum yields. 10. Surface phenomena and catalysis Adsorption

from gages and solutions on solid adsorbents, adsorption isotherms- Langmuir and B.E.T. isotherms;

determination of surface area, characteristics and mechanism of reaction on heterogeneous catalysts. 11. Bio-

inorganic chemistry Metal ions in biological systems and their role in ion-transport across the membranes

(molecular mechanism), ionophores, photosynthesis-PSI, PSII; nitrogen fixation, oxygen-uptake proteins,

cytochromes and ferredoxins. 12. Coordination chemistry (a) Electronic configurations; introduction to

theories of bonding in transition metal complexes. Valence bond theory, crystal field theory and its

modifications; applications of theories in the explanation of magnetism and electronic spactra of metal

complexes. (b) Isomerism in coordination compounds. IUPAC nomenclature of coordination compounds;

stereochemistry of complexes with 4 and 6 coordination numbers; chelate effect and polynuclear complexes;

trans effect and its theories; kinetics of substitution reactions in square-planer complexes; thermodynamic and

kinetic stability of complexes. (c) Synthesis and structures of metal carbonyls; carboxylate anions, carbonyl

hydrides and metal nitrosyl compounds. (d) Complexes with aromatic systems, synthesis, structure and

bonding in metal olefin complexes, alkyne complexes and cyclopentadienyl complexes; coordinative

unsaturation, oxidative addition reactions, insertion reactions, fluxional molecules and their characterization.

Compounds with metal-metal bonds and metal atom clusters. 13. General chemistry of 'f' block elements

Lanthanides and actinides; separation, oxidation states, magnetic and spectral properties; lanthanide

contraction. 14. Non-Aqueous Solvents 27 Reactions in liquid NH3, HF, SO2 and H2 SO4. Failure of

solvent system concept, coordination model of non-aqueous solvents. Some highly acidic media,

fluorosulphuric acid and super acids.

PAPER II

Delocalised covalent bonding :Aromaticity, anti-aromaticity; annulenes, azulenes, tropolones, kekulene,

fulvenes, sydnones. 2 (a) Reaction mechanisms : General methods (both kinetic and non-kinetic) of study of

mechanism or organic reactions illustrated by examples-use of isotopes, cross-over experiment, intermediate

trapping, stereochemistry; energy diagrams of simple organic reactions-transition states and intermediates; energy

of activation; thermodynamic control and kinetic control of reactions. (b) Reactive intermediates :Generation,

geometry, stability and reactions of carbonium and carbanium ions, carbanions, free radicals, carbenes, benzynes

and niternes. (c) Substitution reactions :SN1, SN2, SNi, SN1', SN2', SNi' and SRN1 mechanisms; neighbouring

group participation; electrophilic and nucleophilic reactions of aromatic compound including simple heterocyclic

compounds-pyrrole, thiophene, indole. (d) Elimination reactions :E1, E2 and E1cb mechanisms; orientation in

E2 reactions-Saytzeff and Hoffmann; pyrolyticsyn elimination-acetate pyrolysis, Chugaev and Cope eliminations.

(e) Addition reactions :Electrophilic addition to C=C and C=C; nucleophilic addition to C=O, C=N, conjugated

olefins and carbonyls. (f) Rearrangements :Pinacol-pinacolune, Hoffmann, Beckmann, Baeyer-Villiger,

Favorskii, Fries, Claisen, Cope, Stevens and Wagner-Meerwein rearrangements. 3. Pericyclicreactions

:Classification and examples; Woodward-Hoffmann rulesclectrocyclic reactions, cycloaddition reactions [2+2

and 4+2] and sigmatropic shifts [1, 3; 3, 3 and 1, 5] FMO approach. 4. Chemistry and mechanism of reactions :

Aldol condensation (including directed aldol condensation), Claisen condensation, Dieckmann, Perkin,

Knoevenagel, Witting, Clemmensen, Wolff-Kishner, Cannizzaro and von Richter reactions; Stobbe, benzoin and

acyloin condensations; Fischer indole synthesis, Skraup synthesis, Bischler- Napieralski, Sandmeyer, Reimer-

Tiemann and Reformatsky reactions. 5. Polymeric Systems (a) Physical chemistry of polymers : Polymer

solutions and their thermodynamic properties; number and weight average molecular weights of polymers.

Determination of molecular weights by sedimentation, light scattering, osmotic pressure, viscosity, end group

analysis methods.(b) Preparation and properties of polymers :Organic polymers-polyethylene, polystyrene,

polyvinyl chloride, Teflon, nylon, terylene, synthetic and natural rubber. Inorganic polymers-phosphonitrilic

halides, borazines, silicones and silicates.(c) Biopolymers :Basic bonding in proteins, DNA and RNA. 6.

Synthetic uses of reagents :OsO4, HIO4, CrO3, Pb(OAc)4, SeO2, NBS, B2H6, Na- Liquid NH3, LiA1H4,

NaBH4 n-BuLi, MCPBA. 7. Photochemistry :Photochemical reactions of simple organic compounds, excited

and ground states, singlet and triplet states, Norrish-Type I and Type II reactions. 8. Principles of spectroscopy

and applications in structure elucidation (a) Rotational spectra-diatomic molecules; isotopic substitution and

rotational constants. (b) Vibrational spectra-diatomic molecules, linear triatomic molecules, specific

frequencies of functional groups in polyatomic molecules. (c) Electronic spectra :Singlet and triplet states. N-

>π* and π->π* transitions; application to conjugated double bonds and conjugated carbonyls-Woodward-Fieser

rules.(d) Nuclear magnetic resonance :Isochronous and anisochronous protons; chemical shift and coupling

constants; Application of H1 NMR to simple organic molecules. (e) Mass spectra :Parent peak, base peak,

झारखÖडगजट(असाधारण) गुǾवार, 14 माच[, 2024

daughter peak, metastable peak, fragmentation of simple organic molecules; £-cleavage, McLafferty

rearrangement. (f) Electron spin resonance :Inorganic complexes and free radicals.

CIVIL ENGINEERING

PAPER-I

Part-A

: ENGINEERING MECHANICS, STRENGTH OF MATERIALS AND STRUCTURAL ANALYSIS.

ENGINEERING MECHANICS :Units and Dimensions, SI Units, Vectors, Concept of Force, Concept of

particle and rigid body. Concurrent, Non Concurrent and parallel forces in a plane, moment of force and

Varignon's theorem, free body diagram, conditions of equilibrium, Principle of virtual work, equivalent force

system. First and Second Moment of area, Mass moment of Inertia.Static Friction, Inclined Plane and bearings.

Kinematics and Kinetics : Kinematics in Cartesian and Polar Coordinates, motion under uniform and nonuniform

acceleration, motion under gravity. Kinetics of particle : Momentum and Energy principles, D' Alembert's

Principle, Collision of elastic bodies, rotation of rigid bodies, simple harmonic motion, Flywheel. STRENGTH

OF MATERIALS : Simple Stress and Strain, Elastic constants, axially loaded compression members, Shear

force and bending moment, theory of simple bending, Shear Stress distribution across cross sections, Beams of

uniform strength, Leaf spring. Strain Energy in direct stress, bending & shear. Deflection of beams :Mecaulay's

method, Mohr's Moment area method, Conjugate beam method, unit load method. Torsion of Shafts,

Transmission of power, close coiled helical springs, Elastic stability of columns, Euler's Rankine's and Secant

formulae. Principal Stresses and Strains in two dimensions, Mohr's Circle, Theories of Elastic Failure, Thin and

Thick cylinder : Stresses due to internal and external pressure-Lame's equations. STRUCTURAL ANALYSIS

:30 Castiglianio's theorems I and II, unit load method, method of consistent deformation applied to beams and pin

jointed trusses. Slope-deflection, moment distribution, Kani's method of analysis and column Analogy method

applied to indeterminate beams and rigid frames. Rolling loads and Influences lines : Influences lines for Shear

Force and Bending moment at a section of a beam. Criteria for maximum shear force and bending Moment in

beams traversed by a system of moving loads. Influences lines for simply supported plane pin jointed trusses.

Arches : Three hinged, two hinged and fixed arches, rib shortening and temperature effects, influence lines in

arches. Matrix methods of analysis : Force method and displacement method of analysis of indeterminate beams

and rigid frames. Plastic Analysis of beams and frames : Theory of plastic bending, plastic analysis, statical

method, Mechanism method. Unsymmetrical bending : Moment of inertia, product of inertia, position of Neutral

Axis and Principle axes, calculation of bending stresses. Part-B DESIGN OF STRUCTURES : STEEL,

CONCRETE AND MASONRY STRUCTURES. STRUCTURAL STEEL DESIGN :Structural Steel :

Factors of safety and load factors. Rivetted, bolted and welded joints and connections. Design of tension and

compression members, beams of built up section, rivetted and welded plate girders, gantry girders, stancheons

with battens and lacings, slab and gusseted column bases. Design of highway and railway bridges : Through and

deck type plate girder, Warren girder, Pratt truss. DESIGN OF CONCRETE AND MASONRY

STRUCTURES :Concept of mix design. Reinforced Concrete : Working Stress and Limit State method of

design-Recommendations of I.S. codes design of one way and two way slabs, staircase slabs, simple and

continuous beams of rectangular, T and L sections. Compression members under direct load with or without

eccentricity, Isolated and combined footings. Cantilever and Counter fort type retaining walls. Water tanks :

Design requirements for Rectangular and circular tanks resting on ground. Prestressedconcrete : Methods and

systems of prestressing, anchorages, Analysis and design of sections for flexure based on working stress, loss of

prestress. Design of brick masonry as per I.S. Codes.Design of masonry retaining walls.Part-C FLUID

MECHANICS, OPEN CHANNEL FLOW AND HYDRAULIC MACHINES Fluid Mechanics :Fluid

properties and their role in fluid motion, fluid statics including forces acting on plane and curve surfaces.

Kinematics and Dynamics of Fluid flow : Velocity and accelerations, stream lines, equation of continuity,

irrotational and rotational flow, velocity potential and stream functions, flownet, methods of drawing flownet,

sources and sinks, flow separation, free and forced vortices. Control volume equation, continuity, momentum,

energy and moment of momentum equations from control volume equation, Navier-Stokes equation, Euler's

equation of motion, application to fluid flow problems, pipe flow, plane, curved, stationary and moving vanes,

sluice gates, weirs, orifice meters and Venturi meters. Dimensional Analysis and Similitude: Buckingham's Pi-

theorem, dimensionless parameters, similitude theory, model laws, undistorted and distorted models. Laminar

Flow :Laminar flow between parallel, stationary and moving plates, flow through tube. Boundary layer

:Laminar and turbulent boundary layer on a flat plate, laminar sublayer, smooth and rough boundaries, drag and

lift. Turbulent flow through pipes : Characteristics of turbulent flow, velocity distribution and variation of pipe

friction factor, hydraulic grade line and total energy line, 31 siphons, expansion and contractions in pipes, pipe

networks, water hammer in pipes and surge tanks. Open channel flow :Uniform and non-uniform flows,

momentum and energy correction factors, specific energy and specific force, critical depth, resistance equations

and variation of roughness coefficient, rapidly varied flow, flow in contractions, flow at sudden drop, hydraulic

jump and its applications surges and waves, gradually varied flow, classification of surface profiles, control

section, step method of integration of varied flow equation, moving surges and hydraulic bore. HYDRAULIC

MACHINES AND HYDROPOWER :Centrifugal pumps-Types, characteristics, Net Positive Suction Height

झारखÖडगजट(असाधारण) गुǾवार, 14 माच[, 2024

(NPSH), specific speed. Pumps in parallel.Reciprocating pumps, Airvessels, Hydraulic ram, efficiency

parameters, Rotary and positive displacement pumps, diaphragm and jet pumps. Hydraulic turbines, types

classification, Choice of turbines, performance parameters, controls, characteristics, specific speed. Principles of

hydropower development.Type, layouts and Component works. Surge tanks, types and choice. Flow duration

curves and dependable flow. Storage anpondage. Pumped storage plants.Special features of mini, micro-hydel

plants.Part-D GEO TECHNICAL ENGINEERING Types of soil, phase relationships, consistency limits

particles size distribution, classifications of soil, structure and clay mineralogy. Capillary water and structural

water, effective stress and pore water pressure, Darcy's Law, factors affecting permeability, determination of

permeability, permeability of stratified soil deposits. Seepage pressure, quick sand condition, compressibility and

consolidation, Terzaghi's theory of one dimensional consolidation, consolidation test.Compaction of soil, field

control of compaction. Total stress and effective stress parameters, pore pressure coefficients. Shear strength of

soils, Mohr Coulomb failure theory, Shear tests. Earth pressure at rest, acive and passive pressures, Rankine's

theory, Coulomb's wedge theory, earth pressure on retaining wall, sheetpile walls, Braced excavation.Bearing

capacity, Terzaghi and other important theories, net and gross bearing pressure.Immediate and consolidation

settlement.Stability of slope, Total Stress and Effective Stress methods, Conventional methods of slices, stability

number.Subsurface exploration, methods of boring, sampling, penetration tests, pressure meter tests. Essential

features of foundation, types of foundation, design criteria, choice of type of foundation, stress distribution in

soils, Boussinessq's theory, Newmarks's chart, pressure bulb, contact pressure, applicability of different bearing

capacity theories, evaluation of bearing capacity from field tests, allowable bearing capacity, Settlement analysis,

allowable settlement. Proportioning of footing, isolated and combined footings, rafts, buoyancy rafts, Pile

foundation, types of piles, pile capacity, static and dynamic analysis, design of pile groups, pile load test,

settlement of piles, lateral capacity. Foundation for Bridges. Ground improvement techniques-preloading, sand

drains, stone column, grouting, soil stabilisation.

PAPER-II

Part-A

CONSTRUCTION

TECHNOLOGY,

EQUIPMENT,

PLANNING AND

MANAGEMENT

Construction Technology : Engineering Materials : Physical properties of construction materials : Stones,

Bricks and Tiles; Lime, Cement and Surkhi Mortars; Lime Concrete and Cement Concrete, Properties of freshly

mixed and hardened concrete, Flooring Tiles, use of ferrocement, fibre-reinforced and polymer concrete, high

strength concrete and light weight concrete. Timber :32 Properties and uses; defects in timber; seasoning and

preservation of timber. Plastics, rubber and damp-proofing materials, termite proofing, Materials, for Low cost

housing.Construction :Building components and their functions; Brick masonry : Bonds, jointing. Stone

masonry. Design of Brick masonry walls as per I.S. codes, factors of safety, serviceability and strength

requirements; plastering, pointing. Types of Floors & Roofs.Ventilators, Repairs in buildings. Functional

planning of building : Building orientation, circulation, grouping of areas, privacy concept and design of energy

efficient building; provisions of National Building Code. Building estimates and specifications; Cost of works;

valuation.2. Construction Equipment : Standard and special types of equipment, Preventive maintenance and

repair, factors affecting the selection of equipment, economical life, time and motion study, capital and

maintenance cost. Concreting equipments :Weigh batcher, mixer, vibration, batching plant, Concrete pump.

Earth-work equipment :Power shovel hoe, bulldozer, dumper, trailors, and tractors, rollers, sheep foot roller. 3.

Construction Planning and Management :Construction activity, schedules, job layout, bar charts, organization

of contracting firms, project control and supervision. Cost reduction measures. New-work analysis :CPM and

PERT analysis, Float Times, cashing of activities, contraction of network for cost optimization, updating, Cost

analysis and resource allocation. Elements of Engineering Economics, methods of appraisal, present worth,

annual cost, benefit-cost, incremental analysis.Economy of scale and size.Choosing between alternatives

including levels of investments.Project profitability. Part-B SURVEY AND TRANSPORTATION

ENGINEERING Survey :Common methods of distance and angle measurements, plane table survey, leveling

traverse survey, triangulation survey, corrections, and adjustments, contouring, topographical map. Surveying

instruments for above purposes. Tacheometry.Circular and transition curves.Principles of photo-

grammetry.Railways : Permanent way, sleepers, rail fastenings, ballast, points and crossings, design of turn outs,

stations and yards, turntables, signals, and interlocking, levelcrossing. Construction and maintenance of

permanent ways : Super-elevation, creep of rail, ruling gradient, track resistance, tractive effort, relaying of track.

Highway Engineering :Principles of highway planning, Highway alignments. Geometrical design : Cross

section, camber, super-elevation, horizontal and vertical curves. Classification of roads : low cost roads, flexible

pavements, rigid pavements. Design of pavements and their construction, evaluation of pavement failure and

strengthening. Drainage of roads : Surface and sub-surface drainage. Traffic Engineering :Forecasting

techniques origin and destination survey, highway capacity. Channelised and unchannelised intersections, rotary

design elements, markings, sign, signals, street lighting; Traffic surveys.Principle of highway financing.Part-c :

HYDROLOGY, WATER RESOURCES AND ENGINEERING : Hydrology : Hydrological cycle,

precipitation, evaporation, transpiration, depression storage, infiltration, overland flow, hydrograph, flood

frequency analysis, flood estimation, flood routing through a reservoir, channel flow routing-Muskingam method.

Ground water flow : Specific yield, storage coefficient, coefficient of permeability, confined and unconfined

झारखÖडगजट(असाधारण) गुǾवार, 14 माच[, 2024

aquifers, aquitards, radial flow into a well under confined 33 and unconfined conditions, tube wells, pumping and

recuperation tests, ground water potential. WATER RESOURCES ENGINEERING :Ground and surface

water resource, single and multipurpose projects, storage capacity of reservoirs, reservoir losses, reservoir

sedimentation, economics of water resources projects. IRRIGATION ENGINEERING :Water requirements of

crops : consumptive use, quality of water for irrigation, duty and delta, irrigation methods and their efficiencies.

Canals : Distribution systems for canal irrigation, canal capacity, canal losses, alignment of main and distributory

canals, most efficient section, lined canals, their design, regime theory, critical shear stress, bed load, local and

suspended load transport, cost analysis of lined and unlined canals, drainage behind lining. Water logging :

causes and control, drainage system design, salinity. Canal structures : Design of cross regulators, head

regulators, canal falls, aqueducts, metering flumes and canal outlets. Diversion head work : Principles and design

of weirs of permeable and impermeable foundation, Khosla's theory, energy dissipation, stilling basin, sediment

excluders. Storage works : Types of dams, design, principles of rigid gravity and earth dams, stability analysis,

foundation treatment, joints and galleries, control of seepage. Spillways : Spillway types, crest gates, energy

dissipation. River training : Objectives of river training, methods of river training. Part-D

ENVIRONMENTAL ENGINEERING Water Supply : Estimation of surface and subsurface water resources,

predicting demand for water, impurities, of water and their significance, physical, chemical and bacteriological

analysis, waterborne diseases, standards for potable water. Intake of water :pumping and gravity schemes.

Water treatment : principles of coagulation, flocculation and sedimentation; slow-; rapid-, pressure-, filters;

chlorination, softening, removal of taste, odour and salinity. Water storage and distribution :storage and

balancing reservoirs : types, location and capacity. Distribution system : layout, hydraulics of pipe lines, pipe

fittings, valves including check and pressure reducing valves, meters, analysis of distribution systems, leak

detection, maintenance of distribution systems, pumping stations and their operations. Sewage systems :

Domestic and industrial wastes, storm sewage-separate and combined systems, flow through sewers, design of

sewers, sewer appurtenances, manholes, inlets, junctions, siphon. Plumbing in public buildings.Sewage

characterization :BOD, COD, solids, dissolved oxygen, nitrogen and TOC. Standards of disposal in normal

water course and on land.Sewage treatment :Working principles, units, chambers, sedimentation tanks, trickling

filters, oxidation ponds, activated sludge process, septic tank, disposal of sludge, recycling of waste water. Solid

waste :collection and disposal in rural and urban contexts, management of long-term ill-effects. Environmental

pollution :Sustainable development. Radioactive wastes and disposal.Environmental impact assessment for

thermal power plants, mines, river valley projects.Air pollution. Pollution control acts.

FORESTRY

PAPER-I

Section A

1. Silviculture - General : General Silvicultural Principles : ecological and physiological factors influencing

vegetation, natural and artificial regeneration of forests; methods of propagation, grafting techniques; site

factors; nursery and planting techniques-nursery beds, polybags and maintenance, water budgeting, grading and

hardening of seedlings; special approaches; establishment and tending. 2. Silviculture - systems :Clear felling,

uniform shelter wood selection, coppice and conversion systems. Management of silviculture systems of

temperate, subtropical, humid tropical, dry 34 tropical and coastal tropical forests with special reference to

plantation silviculture, choice of species, establishment and management of standards, enrichment methods,

technical constraints, intensive mechanized methods, aerial seeding thinning. 3. Silviculture - Mangrove and

Cold desert : Mangrove : habitat and characteristics, mangrove, plantation-establishment and rehabilitation of

degraded mangrove formations; silvicultural systems for mangrove; protection of habitats against natural

disasters. Cold desert - Characteristics, identification and management of species. 4. Silviculture of trees

:Traditional and recent advances in tropical silvicultural research and practices. Silviculture of some of the

economically important species in India such as Acacia catechu, Acacia nilotica, Acacia auriculiformis,

Albizzialebbeck, Albizziaprocera, AnthocephalusCadamba, Anogeissuslatifolia, Azadirachtaindica, Bamboo

spp,

Buteamonosperma,

Cassia

siamea,Casuarinaequisetifolia,

Cedrusdeodara,

Chukrasiatabularis,

Dalbergiasisoo, Dipterocarpus spp., Emblicaofficindils, Eucalyptus spp, GmelinaArborea, Hardwickiabinata,

LargerstroemiaLanceolata, Pinusroxburghi, Populusspp, Pterocarpusmarsupium, Prosopisjuliflora, Santalum

album, Semecarpusanacardium,. Shorearobusta, Salmaliamalabaricum, Tectonagrandis, Terminalistomemtosa,

Tamarindusindica. Section B 1. Agroforestry, Social Forestry, Joint Forest Management and Tribology :

Agroforestry - scope and necessity; role in the life of people and domestic animals and in integrated land use,

planning especially related to (i) soil and water conservation; (ii) water recharge; (iii) nutrient availability to

crops; (iv) nature and ecosystem preservation including ecological balances through pest-predator relationships

and (v) providing opportunities for enhancing bio-diversity, medicinal and other flora and fauna. Agro forestry

systems under different agro-ecological zones; selection of species and role of multipurpose trees and NTFPs,

techniques, food, fodder and fuel security. Research and Extension needs. Social/Urban Forestry :objectives,

scope and necessity; peoples participation. JFM - principles, objectives, methodology, scope, benefits and role

of NGOs. Tribology - tribal scene in India; tribes, concept of races, principles of social grouping, stages of

tribal economy, education, cultural tradition, customs, ethos and participation in forestry programmes. 2. Forest

झारखÖडगजट(असाधारण) गुǾवार, 14 माच[, 2024

Soils, Soil Conservation and Watershed management : Forests Soils: classification, factors affecting soil

formation; physical, chemical and biological properties. Soil conservation - definition, causes for erosion;

types - wind and water erosion; conservation and management of eroded soils/areas, wind breaks, shelter belts;

sand dunes; reclamation of saline and alkaline soils, water logged and other waste lands. Role of forests in

conserving soils. Maintenance and build up of soil organic matter, provision of loppings for green leaf

manuring; forest leaf litter and composting; Role of microorganisms in ameliorating soils; N and C cycles,

VAM. Watershed Management - concepts of watershed; role of mini-forests and forest trees in overall

resource management, forest hydrology, watershed development in respect of torrent control, river channel

stabilization, avalanche and landslide controls, rehabilitation of degraded areas; hilly and mountain areas;

watershed management and environmental functions of forests; water-harvesting and conservation; ground

water recharge and watershed management; role of integrating forest trees, horticultural crops, field crops, grass

and fodders. 3. Environmental Conservation and Biodiversity : Environment; components and importance,

principles of conservation, impact of deforestation; forest fires and various human activities like mining,

construction and developmental projects, population growth on environment. Pollution - types, global

warming, green house effects, ozone layer depletion, acid rain, impact and control measures, environmental

monitoring; concept of sustainable development. Role of trees and forests in environmental conservation;

control and prevention of air, water and noise pollution. Environmental policy and legislation in 35 India.

Environmental Impact Assessment. Economics assessment of watershed development vis-a-vis ecological and

environmental protection. 4. Tree Improvement and Seed Technology : General concept of tree

improvement, methods and techniques, variation and its use, provenance, seed source, exotics; quantitative

aspects of forest tree improvement, seed production and seed orchards, progeny tests, use of tree improvement in

natural forest and stand improvement, genetic testing programming, selection and breeding for resistance to

diseases, insects, and adverse environment; the genetic base, forest genetic resources and gene conservation in

situ and ex-situ. Cost benefit ratio, economic evaluation.

PAPER II

Section A

Forest Management and Management Systems :Objective and principles; techniques;

stand structure and dynamics, sustained yield relation; rotation, normal forest, growing stock; regulation of yield;

management of forest plantations, commercial forests, forest cover monitoring. Approaches viz., (i) site-specific

planning, (ii) strategic planning, (iii) Approval, sanction and expenditure, (iv) Monitoring (v) Reporting and

governance. Details of steps involved such as formation of Village Forest Committees, Joint Forest Participatory

Management. 2. Forest Working Plan :Forest planning, evaluation and monitoring tools and approaches for

integrated planning; multipurpose development of forest resources and forest industries development; working

plans and working schemes, their role in nature conservation, bio-diversity and other dimensions; preparation and

control. Divisional Working Plans, Annual Plan of Operations.3. Forest Mensuration and Remote Sensing

:Methods of measuring - diameter, girth, height and volume of trees; form-factor; volume estimation of stand,

current annual increment; mean annual increment. Sampling methods and sample plots. Yield calculation; yield

and stand tables, forest cover monitoring through remote sensing; Geographic Information Systems for

management and modeling. 4. Surveying and Forest Engineering :Forest surveying - different methods of

surveying, maps and map reading. Basic principles of forest engineering.Building materials and

construction.Roads and Bridges; General principles, objects, types, simple design and construction of timber

bridges.Section B 1. Forest Ecology and Ethnobotany : Forest ecology - Biotic and aboitic components, forest

eco-systems; forest community concepts; vegetation concepts, ecological succession and climax, primary

productivity, nutrient cycling and water relations; physiology in stress environments (drought, water logging

salinity and alkalinity). Forest types in India, identification of species, composition and associations; dendrology,

taxonomic classification, principles and establishment of herbaria and arboreta.Conservation of forest ecosystems.

Clonal parks, Role of Ethnobotanyin Indian Systems of Medicine; Ayurveda and Unani - Introduction,

nomenclature, habitat, distribution and botanical features of medicinal and aromatic plants. Factors affecting

action and toxicity of drug plants and their chemical constituents.2. Forest Resources and Utilization :

Environmentally sound forest harvesting practices; logging and extraction techniques and principles,

transportation system, storage and sale; Non-Timber Forest Products (NTFPs) definition and scope; gums, resins,

oleoresins, fibres, oil seeds nuts, rubber, canes, bamboos, medicinal plants, charcoal, lac and shellac, Katha and

Bidi leaves, collection; processing and disposal. Need and importance of wood seasoning and preservation;

general principles of seasoning, air and kiln seasoning, solar dehumidification, steam heated and electrical kilns.

Composite wood; adhesives-manufacture, properties, uses, plywood manufacture-properties, uses, fibre boards-

manufacture properties, uses; particle boards manufacture; properties uses. Present status of composite wood

industry in 36 India in future expansion plans. Pulp-paper and rayon; present position of supply of raw material to

industry, wood substitution, utilization of plantation wood; problems and possibilities. Anatomical structure of

wood, defects and abnormalities of wood, timber identification - general principles.3. Forest Protection &

झारखÖडगजट(असाधारण) गुǾवार, 14 माच[, 2024

Wildlife Biology :Injuries to forest - abiotic and biotic, destructive agencies, insect-pests and disease, effects of air

pollution on forests and forest die back. Susceptibility of forests to damage, nature of damage, cause, prevention,

protective measures and benefits due to chemical and biological control.General forest protection against fire,

equipment and methods, controlled use of fire, economic and environmental costs; timber salvage operations after

natural disasters.Role of afforestation and forest regeneration in absorption of CO2. Rotational and controlled

grazing, different methods of control against grazing and browsing animals; effect of wild animals on forest

regeneration, human impacts; encroachment, poaching, grazing, live fencing, theft, shifting cultivation and control.

4. Forest Economics and Legislation : Forest economics: fundamental principles, cost-benefit analyses;

estimation of demand and supply; analysis of trends in the national and international market and changes in

production and consumption patterns; assessment and projection of market structures; role of private sector and

co-operatives; role of corporate financing. Socio-economic analyses of forest productivity and attitudes; valuation

of forest goods and service.Legislation-History of forest development; Indian Forest Policy of 1894, 1952 and

1990. National Forest Policy, 1988 of People's involvement, Joint Forest Management, Involvement of women;

Forestry Policies and issues related to land use, timber and non-timber products, sustainable forest management;

industrialization policies; institutional and structural changes. Decentralization and Forestry Public

Administration. Forest laws, necessity; general principles, Indian Forest Act 1927; Forest Conservation Act, 1980;

Wildlife Protection Act 1972 and their amendments; Application of Indian Penal Code to Forestry. Scope and

objectives of Forest inventory.

GEOLOGY

PAPER I

Section-A

(i) General Geology The Solar System, meteorities, origin and interior of the earth. Radioactivity and age of earth;

Volcanoes- causes and products, volcanic belts. Earthquakes-causes, effects, earthquake belts, seismicity of India,

intensity and magnitude, seismongraphs. Island arcs, deep sea trenches and mid-ocean ridges. Continental

driftevidences and mechanics; seafloor spreading, plate tectonics. Isostasy, orogeny and epeirogeny. Continents

and oceans. (ii) Geomorphology and Remote Sensing Basic concepts of geomorphology. Weathering and mass

wasting. Landforms, slopes and drainage. Geomorphic cycles and their interpretation. Morphology and its relation

to structures and lithology. Applications of geomorphology in mineral prospecting, civil engineering, hydrology

and environmental studies. Geomorphology of Indian subcontinent. Aerial photographs and their interpretation-

merits and limitations. The Electronmagnetic Spectrum. Orbiting satellites and sensor systems. Indian Remote

Sensing Satellites. Satellites data products. Applications of remote sensing in geology. The Geographic

Information System and its applications. Global Positioning System. (iii) Structural geology Principles of

geologic mapping and map reading, projection diagrams, stress and strain ellipsoid and stress-strain relationships

of elastic, plastic and viscous materials. Strain markers in deformed rocks. Behaviour of minerals and rocks under

deformation conditions. Folds and faults classification and mechanics. Structural analysis of folds, foliations,

lineations, joints and faults, unconformities. Superposed 37 deformation. Time-relationship between crystallization

and deformation. Introduction to petro-fabrics. Section-B (iv) PaleontologySpecies- definition and

nomenclature. Megafossils and Microfossils. Modes of preservation of fossils. Different kinds of microfossils.

Application of microfossils in correlation, petroleum exploration, paleoclimatic and paleoceanographic studies.

Morphology, geological history and evolutionary trend in Cephalopoda, Trilobita, Brachiopoda, Echinoidea and

Anthozoa. Stratigraphic utility of Ammonoidea, Trilobita and Graptoloidea. Evolutionary trend in Hominidae,

Equidae and Proboscidae. Siwalik fauna. Gondwana flora and its importance. (v) Stratigraphy and Geology of

India Classification of stratigraphic sequences: litho-stratigraphic, biostratigraphic, chronostratigraphic and

magneto-stratigraphic and their interrelationships. Distribution and classification of Precambrian rocks of India.

Study of stratigraphic distribution and lithology of Phanerozoic rocks of India with reference to fauna, flora and

economic importance. Major boundary problems- Cambrian/Precambrian, Permian/Triassic, Cretaceous/Tertiary

and Pliocene/Pleistocene. Study of climatic conditions, paleogeography and igneous activity in the Indian

subcontinent in the geological past. Tectonic framework of India. Evolution of the Himalayas. (vi) Hydrogeology

and Engineering Geology :Hydrologic cycle and genetic classification of water. Movement of subsurface water.

Springs. Porosity, permeability, hydraulic conductivity, transmissivity and storage coefficient, classification of

aquifers. Water-bearing characteristics of rocks. Groundwater chemistry. Salt water intrusion. Types of wells.

Drainage basin morphometry. Exploration for groundwater. Groundwater recharge. Problems and management of

groundwater. Rainwater harvesting. Engineering properties of rocks. Geological investigations for dams, tunnels

and bridges. Rock as construction material. Alkali-aggregate reaction. Landslides-causes, prevention and

rehabilitation. Earthquake-resistant structures.

Paper-II

Section-A

(i)

Mineralogy Classification of crystals into systems and classes of symmetry. International system of

crystallographic notation. Use of projection diagrams to represent crystal symmetry. Crystal defects.

Elements of X-ray crystallography. Petrological microscope and accessories. Optical properties of common

झारखÖडगजट(असाधारण) गुǾवार, 14 माच[, 2024

rock forming minerals. Pleochroism, extinction angle, double refraction, birefringence, twinning and

dispersion in minerals. Physical and chemical characters of rock forming slilicate mineral groups. Structural

classification of silicates. Common minerals of igneous and metamorphic rocks. Minerals of the carbonate,

phosphate, sulphide and halide groups. (ii) Igneous ad Metamorphic Petrology :Generation and

crystallisation of magma. Crystallisation of albite-anorthite, diopsideanorthite and diopside-wollastonite-

silica systems. Reaction principle. Magmatic differentation and assimilation. Petrogenetic significance of

the textures and structrues of igneous rocks. Petrography and petrogenesis of granite, syenite, diorite, basic

and ultrabasic groups, charnockite, anorthosite and alkaline rocks. Carbonatites. Deccan volcanic province.

Types and agents of metamporphism. Metamporphic grades and zones. Phase rule. Facies of regional and

contact metamorphism. ACF and AKF diagrams. Textures and structures of metamporphic rocks.

Metamorphism of arenaceous, argillaceous and basic rocks. Minerals assemblages Retrograde

metamorphism. Metasomatism and granitisation, migmatites, Granulite terrains of India. (iii)

Sedimentology Sedimentary rocks: Processes of formation, diagenesis and lithification. Properties of

sediments. Clastic and non-clastic rocks-their classification, petrography and depositional environment.

Sedimentary facies and provenance. Sedimentary 38 structures and their significance. Heavy minerals and

their significance. Sedminetary basins of India. Section-B (iv) Economic Geology Ore, ore minerals and

gangue, tenor of ore, classification of ore deposits. Process of formation of minerals deposits. Controls of

ore localisation. Ore textures and structures. Metallogenic epochs and provinces. Geology of the important

Indian deposits of aluminium, chromium, copper, gold, iron, lead zinc, manganese, titanium, uranium and

thorium and industrial minerals. Deposits of coal and petroleum in India. National Mineral Policy.

Conservation and utilization of mineral resources. Marine mineral resources and Law of Sea. (v) Mining

Geology Methods of prospecting-geological, geophysical, geochemical and geobotanical. Techniques of

sampling. Estimation of reserves or ore. Mehtods of exploration and mining metallic ores, industrial

minerals and marine mineral resources. Mineral beneficiation and ore dressing. (vi) Geochemistry and

Environmental Geology Cosmic abundance of elements. Composition of the planets and meteorites.

Structure and composition of earth and distribution of elements. Trace elements. Elements of crystal

chemistry-types of chemical bonds, coordination number. Isolmorphism and polymorphism. Elementary

thermodynamics. Natural hazards-floods, landslides, coastal erosion, earthquakes and volcanic activity and

mitigation. Environmental impact of urbanization, open cast mining, industrial and radioactive waste

disposal, use of fertilizers, dumping of mine waste and fly-ash. Pollution of ground and surface water,

marine pollution Environment protection legislative measures in India.

Mathematics

Paper-I

Section-A

Linear Algebra Vector, space, linear dependence and independence, subspaces, bases, dimensions. Finite

dimensional vector spaces. Matrices, Cayley-Hamiliton theorem, Eigen values and Eigenvectors, matrix of

linear transformation, row and column reduction, Echelon form, equivalence, congruence and similarity,

reduction to canonical form, rank, orthogonal, symmetrical, skew symmetrical, unitary, hermitian, skew-

hermitian forms their Eigen values. Orthogonal and unitary reduction of quadratic and hermitian forms,

positive definite quadratic forms.Calculus Real numbers, limits, continuity, differentiability, mean-value

theorems, Taylor's theorem with remainders, indeterminate forms, maxima and minima, asymptotes.

Functions of several variables: continuity, differentiability, partial derivatives, maxima and minima,

Lagrange's method of multipliers, Jacobian. Riemann's definition of definite integrals, indefinite integrals,

infinite and improper integrals, beta and gamma functions. Double and triple integrals (evaluation techniques

only).Areas, surface and volumes, centre of gravity.Analytic Geometry : Cartesian and polar coordinates in

two and three dimensions, second degree equations in two and three dimensions, reduction to canonical forms,

straight lines, shortest distance between two skew lines, plane, sphere, cone, cylinder, paraboloid, ellipsoid,

hyperboloid of one and two sheets and their properties. Section-B Ordinary Differential Equations :

Formulation of differential equations, order and degree, equations of first order and first degree, integrating

factor, equations of first order but not of first degree, Clariaut's equation, singular solution. Higher order linear

equations, with constant coefficients, complementary function and particular integral, general solution, Euler-

Cauchy equation. 39 Second order linear equations with variable coefficients, determination of complete

solution when one solution is known, method of variation of parameters. Dynamics, Statics and

Hydrostatics : Degree of freedom and constraints, rectilinear motion, simple harmonic motion, motion in a

plane, projectiles, constrained motion, work and energy, conservation of energy, motion under impulsive

forces, Kepler's laws, orbits under central forces, motion of varying mass, motion under resistance.

Equilibrium of a system of particles, work and potential energy, friction, common catenary, principle of

virtual work, stability of equilibrium, equilibrium of forces in three dimensions. Pressure of heavy fluids,

equilibrium of fluids under given system of forces Bernoulli's equation, centre of pressure, thrust on curved

झारखÖडगजट(असाधारण) गुǾवार, 14 माच[, 2024

surfaces, equilibrium of floating bodies, stability of equilibrium, metacentre, pressure of gases. Vector

Analysis :Scalar and vector fields, triple, products, differentiation of vector function of a scalar variable,

gradient, divergence and curl in cartesian, cylindrical and spherical coordinates and their physical

interpretations. Higher order derivatives, vector identities and vector equations. Application to Geometry:

Curves in space, curvature and torsion. Serret-Frenet's formulae, Gauss and Stokes' theorems, Green's

identities.

Paper-II

Section-A

Algebra: Groups, subgroups, normal subgroups, homomorphism of groups quotient groups basic

isomorphism theorems, Sylow's group, permutation groups, Cayley theorem. Rings and ideals, principal ideal

domains, unique factorization domains and Euclidean domains.Field extensions, finite fields.Real Analysis :

Real number system, ordered sets, bounds, ordered field, real number system as an ordered field with least

upper bound property, Cauchy sequence, completeness, Continuity and uniform continuity of functions,

properties of continuous functions on compact sets. Riemann integral, improper integrals, absolute and

conditional convergence of series of real and complex terms, rearrangement of series.Uniform convergence,

continuity, differentiability and integrability for sequences and series of functions. Differentiation of functions

of several variables, change in the order of partial derivatives, implicit function theorem, maxima and minima.

Multiple integrals.Complex Analysis :Analytic function, Cauchy-Riemann equations, Cauchy's theorem,

Cauchy's integral formula, power series, Taylor's series, Laurent's Series, Singularities, Cauchy's residue

theorem, contour integration. Conformal mapping, bilinear transformations.Linear Programming :Linear

programming problems, basic solution, basic feasible solution and optimal solution, graphical method and

Simplex method of solutions. Duality.Transportation and assignment problems.Travelling salesman

problems.Section-B Partial differential equations: Curves and surfaces in three dimensions, formulation of

partial differential equations, solutions of equations of type dx/p=dy/q=dz/r; orthogonal trajectories, Pfaffian

differential equations; partial differential equations of the first order, solution by Cauchy's method of

characteristics; Charpit's method of solutions, linear partial differential equations of the second order with

constant coefficients, equations of vibrating string, heat equation, laplace equation. Numerical Analysis and

Computer programming: Numerical methods: Solution of algebraic and transcendental equations of one

variable by bisection, Regula-Falsi and Newton-Raphson methods, solution of system of linear equations by

Gaussian elimination and Gauss-Jordan (direct) methods, Gauss-Seidel(iterative) method. Newton's (Forward

and backward) and Lagrange's method of interpolation.40 Numerical integration: Simpson's one-third rule,

trapezoidal rule, Gaussian quadrature formula. Numerical solution of ordinary differential equations:

Euler and RungeKuttamethods. Computer Programming: Storage of numbers in Computers, bits, bytes and

words, binary system. arithmetic and logical operations on numbers. Bitwise operations. AND, OR , XOR,

NOT, and shift/rotate operators. Octal and Hexadecimal Systems.Conversion to and Form decimal Systems.

Representation of unsigned integers, signed integers and reals, double precision reals and long integers.

Algorithms and flow charts for solving numerical analysis problems. Developing simple programs in Basic for

problems involving techniques covered in the numerical analysis. Mechanics and Fluid Dynamics

:Generalised coordinates, constraints, holonomic and non-holonomic, systems. D'Alembert's principle and

Lagrange' equations, Hamilton equations, moment of intertia, motion of rigid bodies in two dimensions.

Equation of continuity, Euler's equation of motion for inviscid flow, stream-lines, path of a particle, potential

flow, two-dimensional and axisymetric motion, sources and sinks, vortex motion, flow past a cylinder and a

sphere, method of images. Navier- Stokes equation for a viscous fluid.

Mechanical Engineering

Paper I

Theory of Machines Kinematic and dynamic analysis of planar mechanisms. Cams, Gears and gear trains,

Flywheels, Governors, Balancing of rigid rotors, Balancing of single and multicylinder engines, Linear

vibration analysis of mechanical systems (single degree and two degrees of freedom), Critical speeds and

whirling of shafts, Automatic Controls, Belts and chain drives. Hydrodynamic bearings.2. Mechanics of

Solids :Stress and strain in two dimensions. Principal stresses and strains, Mohr's construction, linear elastic

materials, isotropy and an isotropy, Stress-strain relations, uniaxial loading, thermal stresses. Beams :Banding

moment and shear force diagrams, bending stresses and deflection of beams, Shear stress distribution. Torsion

of shafts, helical springs. Combined stresses, Thick and thin walled pressure vessels. Struts and columns,

Strain energy concepts and theories of failure. Rotation discs. Shrink fits. 3. Engineering Materials :Basic

concepts on structure of solids, Crystalline materials, Defects in crystalline materials, Alloys and binary phase

diagrams, structure and properties of common engineering materials. Heat treatment of steels.Plastics,

Ceramics and composite Materials, common applications of various materials.4. Manufacturing Science

:Marchant's force analysis, Taylor's tool life equation, machinability and machining economics, Rigid, small

and flexible automation, NC, CNC. Recent machining methods- EDM, ECM and ultrasonics. Application of

lasers and plasmas, analysis of forming processes. High energy rate forming.Jigs, fixtures, tools and gauges,

झारखÖडगजट(असाधारण) गुǾवार, 14 माच[, 2024

Inspection of length, position, profile and surface finish.5. MANUFACTURING MANAGEMENT

:Production Planning and Control, Forecasting-Moving average, exponential smoothing, Operations

sheduling; assembly line balancing. Product development. Breakeven analysis, Capacity planning. PERT and

CPM. Control Operations : Inventory control-ABC analysis. EOQ model.Materials requirement planning.Job

design, Job standards, work measurement, Quality management-Quality control. Operations Research : Linear

programming-Graphical and Simplex methods. Transportation and assignment models.Single server queuing

model.41 Value Engineering : Value analysis, for cost/value. Total quality management and forecasting

techniques. Project management.6. ELEMENTS OF COMPUTATION :Computer Organisation, Flow

charting. Features of Common Computer Languages- FORTRAN d Base III, Lotus 1-2-3 C and elementary

programming.

PAPER-II

1. THERMODYNAMICS :Basic concept. Open and closed systems, Applications of Thermodynamic Laws,

Gas equations, Clapeyron equation, Availability, Irreversibility and Tds relations. 2. I.C. Engines, Fuels and

Combustion :Spark Ignition and compression ignition engines, Four stroke engine and Two stroke engines,

mechanical, thermal and volumetric efficiency, Heat balance. Combustion process in S.I. and C.I. engines,

pre-ignition detonation in S.I. engine Diesel knock in C.I. engine. Choice of engine fuels, Octane and Cetane

ratings. Alternate fuels Carburration and Fuel injection, Engine emissions and control. Solid, liquid and

gaseous fuels, stoichometric air requirements and excess air factor, fuel gas analysis, higher and lower

calorific values and their measurements. 3. HEAT TRANSFER, REFRIGERATION AND AIR

CONDITIONING :One and two dimensional heat conduction. Heat transfer from extended surfaces, heat

transfer by forced and free convection. Heat exchangers. Fundamentals for diffusive and connective mass

transfer, Radiation laws, heat exchange between black and non black surfaces, Network Analysis. Heat pump

refrigeration cycles and systems, Condensers, evaporators and expansion devices and controls. Properties and

choice of refrigerant, Refrigeration Systems and components, psychometrics, comfort indices, cooling loading

calculations, solar refrigeration. 4. TURBO-MACHINES AND POWER PLANTS :Continuity, momentum

and Energy Equations. Adiabatic and Isentropic flow, Fanno lines, Raylegh lines. Theory and design of axial

flow turbines and compressors, Flow through turbo-machine blade, cascades, centrifugal compressor.

Dimensional analysis and modelling. Selection of site for steam, hydro, nuclear and stand-by power plants,

selection base and peak load power plants Modern High pressure, High duty boilers, Draft and dust removal

equipment, Fuel and cooling water systems, heat balance, station and plant heat rates, operation and

maintenance of various power plants, preventive maintenance, economics of power generation.

Physics

Paper I

Section-A

1. Classical Mechanics (a) Particle dynamics: Centre of mass and laboratory coordinates conservation of

linear and angular momentum. The rocket equation. Rutherford scattering, Galilean transformation, inertial and

non-inertial frames, rotating frames, centrifugal and Coriolis forces, Foucault pendulum. (b) System of

particles: Constraints, degrees of freedom, generalized coordinates and moments. Lagrange's equation and

applications to linear harmonic oscillator, simple pendulum and central force problems. Cyclic coordinates,

Hamiltonian Lagrange's equation from Hamilton's principle. (c) Rigid body dynamics: Eulerian angles,

inertia tensor, principal moments of inertia. Euler's equation of motion of a rigid body, force-free motion of a

rigid body, Gyroscope.2. Special Relativity, Waves & Geometrical Optics (a) Special Relativity:

Michelson-Morley experiment and its implications. Lorentz transformations-length contraction, time dilation,

addition of velocities, aberration and Doppler effect, massenergy relation, simple applications to a decay

process. Minkowski diagram, four dimensional momentum vector. Covariance of equations of physics.(b)

Waves: 42 Simple harmonic motion, damped oscillation, forced oscillation and resonance. Beats.Stationary

waves in a string.Pulses and wave packets.Phase and group velocities. Reflection and Refraction from

Huygens' principle. (c) Geometrical Optics: Laws of reflection and refraction from Fermat's principle. Matrix

method in paraxial optic-thin lens formula, nodal planes, system of two thin lenses, chromatic and spherical

aberrations. 3. Physical Optics: (a) Interference: Interference of light-Young's experiment, Newton's rings,

interference by thin films, Michelson interferometer. Multiple beam interference and Fabry-Perot

interferometer. Holography and simple applications.(b) Diffraction: Fraunhofer diffraction-single slit, double

slit, diffraction grating, resolving power. Fresnel diffraction: - half-period zones and zones plates. Fresnel

integrals. Application of Cornu's spiral to the analysis of diffraction at a straight edge and by a long narrow slit.

Diffraction by a circular aperture and the Airy pattern.(c) Polarisation and Modern Optics: Production and

detection of linearly and circularly polarised light. Double refraction, quarter wave plate.Optical activity.

Principles of fibre optics attenuation; pulse dispersion in step index and parabolic index fibres; material

dispersion, single mode fibres. Lasers-Einstein A and B coefficients.Ruby and He-Ne lasers.Characteristics of

laser light-spatial and temporal coherence.Focussing of laser beams.Three-level scheme for laser

झारखÖडगजट(असाधारण) गुǾवार, 14 माच[, 2024

operation.Section-B 4. Electricity and Magnetism: (a) Electrostatics and Magnetostatics: Laplace and

Poisson equations in electrostatics and their applications.Energy of a system of charges, multiple expansion of

scalar potential.Method of images and its applications.Potential and field due to a dipole, force and torque on a

dipole in an external field.Dielectrics, polarisation.Solutions to boundary-value problemsconducting and

dielectric spheres in a uniform electric field.Magnetic shell, uniformly magnetized sphere.Ferromagnetic

materials, hysteresis, energy loss.(b) Current Electricity: Kirchhoff's laws and their applications. Biot-Savart

law, Ampere's law, Faraday's law, Lenz' law.Self-and mutual-inductances. Mean and r.m.s. values in AC

circuits. LR CR and LCR circuits-series and parallel resonance.Quality factor.Principal of transformer.5.

Electromagnetic Theory & Black Body Radiation: (a) Electromagnetic Theory: Displacement current and

Maxwell's equations. Wave equations in vacuum, Pointing theorem.Vector and scalar potentials. Gauge

invariance, Lorentz and Coulomb gauges. Electromagnetic field tensor, covariance of Maxwell's

equations.Wave equations in isotropic dielectrics, reflection and refraction at the boundary of two

dielectrics.Fresnel's relations.Normal and anomalous dispersion.Rayleigh scattering.(b) Blackbody radiation:

Balckbody radiation ad Planck radiation law-Stefan-Boltzmann law, Wien displacement law and Rayleigh-

Jeans law. Planck mass, Planck length, Planck time,.Planck temperature and Planck energy.6. Thermal and

Statistical Physics : (a) Thremodynamics: Laws of thermodynamics, reversible and irreversible processes,

entropy. Isothermal, adiabatic, isobaric, isochoric processes and entropy change. Otto and Diesel engines,

Gibbs' phase rule and chemical potential.van der Waals equation of state of a real gas, critical constants.

Maxwell-Boltzman distribution of molecular velocities, transport phenomena, equipartition and virial

theorems.Dulong-Petit, Einstein, and Debye's theories of specific heat of solids.Maxwell relations and

applications.43 Clausius-Clapeyronequation. Adiabatic demagnetisation, Joule-Kelvin effect and liquefaction

of gases.(b) Statistical Physics: Saha ionization formula. Bose-Einstein condensation. Thermodynamic

behavior of an ideal Fermi gas, Chandrasekhar limit, elementary ideas about neutron stars and pulsars.

Brownian motion as a random walk, diffusion process.Concept of negative temperatures.

Paper-II

Section-A

1. Quantum Mechanics I : Wave-particle duality. Schroedinger equation and expectation values. Uncertainty

principle. Solutions of the one-dimensional Schroedinger equation free particle (Gaussian wave-packet), particle

in a box, particle in a finite well, linear harmonic oscillator. Reflection and transmission by a potential step and

by a rectangular barrier. Use of WKB formula for the life-time calculation in the alpha-decay problem. 2.

Quantum Mechanics II & Atomic Physics: (a) Quantum Mechanics II: Particle in a three dimensional box,

density of states, free electron theory of metals. The angular momentum problem. The hydrogen atom. The spin

half problem and properties of Pauli spin matrices. (b) Atomic Physics: Stern-Gerlack experiment, electron

spin, fine structure of hydrogen atom. LS coupling, J-J coupling. Spectroscopic notation of atomic states.

Zeeman effect. Frank- Condon principle and applications. 3. Molecular Physics: Elementary theory of

rotational, vibrational and electronic spectra of diatomic molecules. Raman effect and molecular structure. Laser

Raman spectroscopy. Importance of neutral hydrogen atom, molecular hydrogen and molecular hydrogen ion in

astronomy Fluorescence and Phosphorescence. Elementary theory and applications of NMR. Elementary ideas

about Lamb shift and its significance. Section-B 4. Nuclear Physics: Basic nuclear properties-size, binding

energy, angular momentum, parity, magnetic moment. Semi-empirical mass formula and applications. Mass

parabolas. Ground state of a deuteron magnetic moment and non-central forces. Meson theory of nuclear forces.

Salient features of nuclear forces. Shell model of the nucleus-success and limitations. Violation of parity in beta

decay. Gamma decay and internal conversion. Elementary ideas about Mossbauer spectroscopy. Q-value of

nuclear reactions. Nuclear fission and fusion, energy production in stars. Nuclear reactors. 5. Particle Physics

& Solid State Physics: (a) Particle Physics: Classification of elementary particles and their interactions.

Conservation laws. Quark structure of hadrons. Field quanta of electroweak and strong interactions. Elementary

ideas about Unification of Forces. Physics of neutrinos. (b) Solid State Physics: Cubic crystal structure. Band

theory of solids-conductors, insulators and semiconductors. Elements of superconductivity, Meissner effect,

Josephson junctions and applications. Elementary ideas about high temperature superconductivity. 6.

Electronics :Intrinsic and extrinsic semi-conductors-p-n-p and n-p-n transistors. Amplifiers and oscillators. Op-

amps. FET, JFET and MOSFET. Digital electronics-Boolean identities, De; Morgan's laws, Logic gates and

truth tables, Simple logic circuits. Thermistors, solar cells. Fundamentals of microprocessors and digital

computers.

Statistics

Paper-I

Probability : Sample space and events, probability measure and probability space, random variable as a

measurable function, distribution function of a random variable, discrete and 44 continuous-type random

variable probability mass function, probability density function, vector-valued random variable, marginal and

conditional distributions, stochastic independence of events and of random variables, expectation and moments

of a random variable, conditional expectation, convergence of a sequence of random variable in distribution, in

झारखÖडगजट(असाधारण) गुǾवार, 14 माच[, 2024

probability, in p-th mean and almost everywhere, their criteria and inter-relations, Borel-Cantelli lemma,

Chebyshev's and Khinchine's weak laws of large numbers, strong law of large numbers and Kolmogorov's

theorems, Glivenko-Cantelli theorem, probability generating function, characteristic function, inversion

theorem, Laplace transform, related uniqueness and continuity theorems, determination of distribution by its

moments. Linderberg and Levy forms of central limit theorem, standard discrete and continuous probability

distributions, their interrelations and limiting cases, simple properties of finite Markov chains.Statistical

Inference: Consistency, unbiasedness, efficiency, sufficiency, minimal sufficiency, completeness, ancillary

statistic, factorization theorem, exponential family of distribution and its properties, uniformly minimum

variance unbiased (UMVU) estimation, Rao- Blackwell and Lehmann-Scheffe theorems, Cramer-Rao inequality

for single and several-parameter family of distributions, minimum variance bound estimator and its properties,

modifications and extensions of Cramer-Rao inequality, Chapman-Robbins inequality, Bhattacharyya's bounds,

estimation by methods of moments, maximum likelihood, least squares, minimum chi-square and modified

minimum chi-square, properties of maximum likelihood and other estimators, idea of asymptotic efficiency, idea

of prior and posterior distributions, Bayes’ estimators. Non-randomised and randomised tests, critical function,

MP tests, Neyman-Pearson lemma, UMP tests, monotone likelihood ratio, generalised Neyman-Pearson lemma,

similar and unbiased tests, UMPU tests for single and several-parameter families of distributions, likelihood

rotates and its large sample properties, chi-square goodness of fit test and its asymptotic distribution. Confidence

bounds and its relation with tests, uniformly most accurate (UMA) and UMA unbiased confidence bounds.

Kolmogorov's test for goodness of fit and its consistency, sign test and its optimality. Wilcoxon signed-ranks test

and its consistency, Kolmogorov-Smirnov two-sample test, run test, Wilcoxon-Mann-Whiltney test and median

test, their consistency and asymptotic normality. Wald's SPRT and its properties, OC and ASN functions, Wald's

fundamental identity, sequential estimation. Linear Inference and Multivariate Analysis : Linear statistical

models, theory of least squares and analysis of variance, Gauss- Markoff theory, normal equations, least squares

estimates and their precision, test of significance and interval estimates based on least squares theory in one-

way, two-way and three-way classified data, regression analysis, linear regression, curvilinear regression and

orthogonal polynomials, multiple regression, multiple and partial correlations, regression diagnostics and

sensitivity analysis, calibration problems, estimation of variance and covariance components, MINQUE theory,

multivariate normal distribution, Mahalanobis D2 and Hotelling's T2 statistics and their applications and

properties, discriminant analysis, canonical correlations, one-way MANOVA, principal component analysis,

elements of factor analysis. Sampling Theory and Design of Experiments: An outline of fixed-population and

super-population approaches, distinctive features of finite population sampling, probability sampling designs,

simple random sampling with and without replacement, stratified random sampling, systematic sampling and its

efficacy for structural populations, cluster sampling, two-stage and multi-stage sampling, ratio and regression,

methods of estimation involving one or more auxiliary variables, two-phase sampling, probability proportional

to size sampling with and without replacement, the Hansen-Hurwitz and the Horvitz-Thompson estimators, non-

negative variance estimation with reference to the Horvitz-Thompson estimator, non-sampling errors, Warner's

randomized response technique for sensitive characteristics. 45 Fixed effects model (two-way classification)

random and mixed effects models (two-way classification per cell), CRD, RBD, LSD and their analyses,

incomplete block designs, concepts of orthogonality and balance, BIBD, missing plot technique, factorial

designs : 2n, 32 and 33, confounding in factorial experiments, split-plot and simple lattice designs.

PAPER-II

I. Industrial Statistics Process and product control, general theory of control charts, different types of

control charts for variables and attributes, X, R, s, p, np and c charts, cumulative sum chart, V-mask, single,

double, multiple and sequential sampling plans for attributes, OC, ASN, AOQ and ATI curves, concepts of

producer's and consumer's risks, AQL, LTPD and AOQL, sampling plans for variables, use of Dodge-Romig

and Military Standard tables. Concepts of reliability, maintainability and availability, reliability of series and

parallel systems and other simple configurations, renewal density and renewal function, survival models

(exponential), Weibull, lognormal, Rayleigh, and bath-tub), different types of redundancy and use of

redundancy in reliability improvement, problems in life-testing, censored and truncated experiments for

exponential models. II. Optimization Techniques: Different, types of models in Operational Research, their

construction and general methods of solution, simulation and Monte-Carlo methods, the structure and

formulation of linear programming (LP) problem, simple LP model and its graphical solution, the simplex

procedure, the two-phase method and the M-technique with artificial variables, the duality theory of LP and its

economic interpretation, sensitivity analysis, transportation and assignment problems, rectangular games, two-

person zero-sum games, methods of solution (graphical and algerbraic). Replacement of failing or deteriorating

items, group and individual replacement policies, concept of scientific inventory management and analytical

structure of inventory problems, simple models with deterministic and stochastic demand with and without lead

time, storage models with particular reference to dam type. Homogeneous discrete-time Markov chains,

transition probability matrix, classification of states and ergodic theorems, homogeneous continuous-time

Markov chains, Poisson process, elements of queueing theory, M/M/1, M/M/K, G/M/1 and M/G/1 queues.

Solution of statistical problems on computers using well known statistical software packages like SPSS. III.

झारखÖडगजट(असाधारण) गुǾवार, 14 माच[, 2024

Quantitative Economics and Official Statistics: Determination of trend, seasonal and cyclical components,

Box-Jenkins method, tests for stationery of series, ARIMA models and determination of orders of

autoregressive and moving average components, forecasting. Commonly used index numbers-Laspeyre's,

Paashe's and Fisher's ideal index numbers, chain-base index number uses and limitations of index numbers,

index number of wholesale prices, consumer price index number, index numbers of agricultural and industrial

production, tests, for index numbers like proportionality test, time-reversal test, factor-reversal test, circular test

and dimensional invariance test. General linear model, ordinary least squares and generalised least squires

methods of estimation, problem of multicollinearity, consequences and solutions of multicollinearity,

autocorrelation and its consequences, heteroscedasticity of disturbances and its testing, test for independence of

disturbances, Zellner's seemingly unrelated regression equation model and its estimation, concept of structure

and model for simultaneous equations, problem of identification-rank and order conditions of identifiability,

two-stage least squares method of estimation. Present official statistical system in India relating to population,

agriculture, industrial production, trade and prices, methods of collection of official statistics, their reliability

and limitation and the principal publications containing such statistics, various official agencies responsible for

data collection and their main functions. 46 IV. Demography and Psychometry: Demographic data from

census, registration, NSS and other surveys, and their limitation and uses, definition, construction and uses of

vital rates and ratios, measures of fertility, reproduction rates, morbidity rate, standardized death rate, complete

and abridged life tables, construction of life tables from vital statistics and census returns, uses of life tables,

logistic and other population growth curves, fitting a logistic curve, population projection, stable population

theory, uses of stable population and quasi-stable population techniques in estimation of demographic

parameters, morbidity and its measurement, standard classification by cause of death, health surveys and use of

hospital statistics. Methods of standardisation of scales and tests, Z-scores, standard scores, scores, percentile

scores, intelligence quotient and its measurement and uses, validity of test scores and its determination, use of

factor analysis and path analysis in psychometry.

ZOOLOGY

PAPER-1

Section-A

1. Non-chordata and chordata : (a) Classification and relationship of various phyla upto sub-classes;

Acoelomata and Coelomata; Protostomes and Deuterostomes, Bilateralia and Radiata; Status of Protista,

Parazoa, Onychophora and Hemichordata; Symmetry. (b) Protozoa : Locomotion, nutrition, reproduction;

evolution of sex; General features and life history of Paramaecium, Monocystis, Plasmodium, and Leishmania.

(c) Porifera : Skeleton, canal system and reproduction. (d) Coelenterata : Polymorphism, defensive structures

and their mechanism; coral reefs and their formation; metagenesis; general features and life history of Obelia

and Aurelia. (e) Platyhelminthes : Parasitic adaptation; general features and life history of Fasciola and

Taeniaand their relation to human. (f) Nemathelminthes : General features, life history and parasitic adaptation

of Ascaris; nemathelminths in relation to human. (g) Annelida : Coelom and metamerism; modes of life in

polychaetes; general features and life history of nereis (Neanthes), earthworm (Pheretima) and leach

(Hirudinaria). (h) Arthropoda : Larval forms and parasitism in Crustacea; vision and respiration in arthropods

(prawn, cockroach and scorpion); modification of mouth parts in insects (cockroach, mosquito, housefly, honey

bee and butterfly); metamorphosis in insects and its hormonal regulation; social organization in insects (termites

and honey bees). (i) Mollusca : Feeding, respiration, locomotion, shell diversiy; general features and life history

of Lamellidens, Pila and Sepia, torsion and detorsion in gastropods. (j) Echinodermata : Feeding, respiration,

locomotion larval forms; general features and life history of Asterias. (k) Protochordata : Origin of chordates;

general features and life history of Branchiostoma and Herdamania. (l) Pisces : Scales, respiration, locomotion,

migration. (m) Amphibia : Origin of tetrapods; parental care, paedomorphosis. (n) Reptilia : Origin of reptiles;

skull types; status of Sphenodon and crocodiles. (o) Aves : Origin of birds; flight adaptation, migration. (p)

Mammalia : Origin of mammals; dentition; general features of egg laying mammals, pouched-mammals, aquatic

mammals and primates; endocrine glands and other hormone producing structures (pituitary, thyroid,

parathyroid, adrenal, pancreas, gonads) and their interrelationships. (q) Comparative functional anatomy of

various systems of vertebrates (integument and its derivatives, endoskeleton, locomotory organs, digestive

system, respiratory system, circulatory system including heart and aortic arches; urinogenital system, brain and

sense organs (eye and ear). Section- B 1. Ecology : (a) Biosphere: Biogeochemical cycles, green-houses

effect, ozone layer and its impact; ecological succession, biomes and ecotones. 47 (b) Population,

characteristics, population dynamics, population stabilization. (c) Conservation of natural resources- mineral

mining, fisheries, aquaculture; forestry; grassland; wildlife (Project Tiger); sustainable production in agriculture

integrated pest management. (d) Environmental biodegradation; pollution and its impact on biosphere and its

prevention. II. Ethology : (a) Behaviour : Sensory filtering, responsiveness, sign stimuli, learning, instinct,

habituation, conditioning, imprinting. (b) Role of hormones in drive; role of pheromones in alarm spreading;

crypsis, predator detection, predator tactics, social behaviour in insects and primates; courtship (Drosophila, 3-

spine stickleback and birds). (c) Orientation, navigation, homing; biological rhythms; biological clock, tidal,

seasonal and circadian rhythms. (d) Methods of studying animal behaviour. III. Economic Zoology : (a)

Apiculture, sericulture, lac culture, carp culture, pearl culture, prawn culture. (b) Major infectious and

झारखÖडगजट(असाधारण) गुǾवार, 14 माच[, 2024

communicable diseases (small pox, plague, malaria, tuberculosis, cholera and AIDS) their vectors, pathogens

and prevention. (c) Cattle and livestock diseases, their pathogens (helminthes) and vectors (ticks, mites,

Tabanus, Stomoxys). (d) Pests of sugar cane (Pyrillaperpusiella), oil seed (Achaea janata) and rice

(Sitophilusoryzae). IV. Biostatistics :Designing of experiments; null hypothesis; correlation, regression,

distribution and measure of central tendency, chi square, student t-test, F-test (oneway& two-way F-test). V.

Instrumental methods : (a) Spectrophotometry, flame photometry, Geiger-Muller counter, scintillation

counting. (b) Electron microscopy .

PAPER-II

Section-A

I. Cell Biology : (a) Structure and function of cell and its organelles(nucleus, plasma membrane,

mitochondria, Golgi bodies, endoplasmic reticulum, ribosome’s and Iysosomes), cell division (mitosis and

meiosis), mitotic spindle and mitotic apparatus, chromosome movement. (b) Watson-Crick model of DNA,

replication of DNA, protein synthesis, transcription and transcription factors. II. Genetics a) Gene structure

and functions; genetic code. (b) Sex chromosomes and sex determination in Drosophila, nematodes and

human. (c) Mendel's laws of inheritance, recombination, linkage, linkage maps, multiple alleles, citron

concept; genetics of blood groups. (d) Mutations and mutagenesis : radiation and chemical. (e) Cloning

technology, plasmids and cosmids as vectors, transgenic, transposons, DNA sequence cloning and whole

animal cloning (Principles and methodology). (f) Regulation and gene expression in pro-and eukaryotes. (g)

Signal transduction; pedigreeanalysis; congenital diseases in human. (h) Human genome mapping; DNA

finger-printing. III. Evolution (a) Origin of life (b) Natural selection, role of mutation in evolution, mimicry,

variation, isolation, speciation. (c) Fossils and fossilization; evolution of horse, elephant and human. (d)

Hardy-Weinberg Law, causes of change in gene frequency. (e) Continental drift and distribution of animals.

IV. Systematics 48 Zoological nomenclature; international code; cladistics. Section-B I. Biochemistry (a)

Structure and role of carbohydrates, fats, lipids, proteins, amino acids, nucleic acids; saturated and unsaturated

fatty acids, cholesterol. (b) Glycolysis and Krebs cycle, oxidation and reduction, oxidative phosphorylation;

energy conservation and release, ATP, cyclic AMP-its structure and role. (c) Hormone classification (steroid

and peptide hormones), biosynthesis and function. (d) Enzymes : types and mechanisms of action;

immunoglobulin and immunity; vitamins and coenzymes. (e) Bioenergetics. II Physiology (with special

reference to mammals) (a) Composition and constituents of blood; blood groups and Rh factor in human;

coagulation, factors and mechanism of coagulation; acid-base balance, thermo regulation. (b) Oxygen and

carbon dioxide transport; haemoglobin : constituents and role in regulation. (c) Nutritive requirements; role of

salivary glands, liver, pancreas and intestinal glands in digestion and absorption. (d) Excretory products;

nephron and regulation of urine formation; osmoregulation. (e) Types of muscles, mechanism of contraction of

skeletal muscles. (f) Neuron, nerve impulse-its conduction and synaptic transmission; neurotransmitters. (g)

Vision, hearing and olfaction in human. (h) Mechanism of hormone action. (I) Physiology of reproduction,

role of hormones and phermones.III. Developmental Biology (a) Differentiation from gamete to neurula

stage; dedifferentiation; metaplasia, induction, morphogenesis and morphogen; fate maps of gastrulae in frog

and chick; organogenesis of eye and heart, placenation in mammals. (b) Role of cytoplasm in and genetic

control of development; cell lineage; causation of metamorphosis in frog and insects; paedogenesia and

neoteny; growth, degrowth and cell death; ageing; blastogenesis; regeneration; teratogenesis; neoplasia. (c)

Invasiveness of placenta; in vitro fertilization; embryo transfer, cloning. (d) Baer's law; evo-devo concept.

CHEMICAL ENGINEERING

PAPER-I

Section A

(a) Fluid and Particle Dynamics Viscosity of fluids. Laminar and turbulent flows. Equation of continuity and

Navier- Stokes equition-Bernoulli's theorem. Flow meters. Fluid drag and pressure drop due to friction,

Reynold's Number and friction factor - effect of pipe roughness. Economic pipe diameter. Pumps, water,

air/steam jet ejectors, compressors, blowers and fans. Agitation and mixing of liquids. Mixing of solids and

pastes. Crushing and Grinding - principles and equipment. Rittinger's and Bond's laws. Filtration and filtration

equipment. Fluid-particle mechanics - free and hindered settling. Fluidisation and minimum fluidization

velocity, concepts of compressible and incompressible flow. Transport of Solids. (b) Mass Transfer

Molecular diffusion coefficients, First and second law and diffusion, mass transfer coefficients, film and

penetration theories of mass transfer. Distillation, simple distillation, relative volatility, fractional distillation,

plate and packed columns for distillation. Calculation of theoretical number of plates. Liquid-liquid equilibria.

Extraction - theory and practice; Design of gas-absorption columns. Drying. Humidification, dehumidification.

Crystallisation. Design of equipment. (c) Heat Transfer Conduction, thermal conductivity, extended surface

heat transfer. Convection - free and forced. Heat transfer coefficients - Nusselt Number. LMTD and

effectiveness. NTU methods for the design of Double Pipe and Shell & Tube Heat Exchangers. Analogy

between heat and momentum transfer. Boiling and condensation heat transfer. Single and multiple-effect

evaporators. Rediation - Stefan- Boltzman Law, emissivity and absorptivity. Calculation of heat load of a

furnace. Solar heaters. Section B (d) Noval Separation Processes Equilibrium separation processes – ion-

झारखÖडगजट(असाधारण) गुǾवार, 14 माच[, 2024

exchange, osmosis, electro-dialysis, reverse osmosis, ultra-filtration and other membrane processes. Molecular

distillation. super critical fluid extraction. (e) Process Equipment Design Factors affecting vessel design

criteria - Cost considerations. Design of storage vessels-vertical, horizontal spherical, underground tanks for

atmospheric and higher pressure. Design of closures flat and elliptical head. Design of supports. Materials of

construction-characteristics and selection. (f) Process Dynamics and Control Measuring instruments for

process variables like level, pressure, flow, temperature pH and concentration with indication in

visual/pneumatic/analog/digital signal forms. Control variable, manipulative variable and load variables.

Linear control theory- Laplace, transforms. PID controllers. Block diagram representation transient and

frequency response, stability of closed loop system. Advanced control strategies. Computer based process

control.

Paper-II

Section A

(a) Material and Energy Balances Material and energy balance calculations in processes with

recycle/bypass/purge. Combustion of solid/ liquid/gaseous fuels, stoichiometric relationships and excess air

requirements. Adiabatic flame temperature. (b) Chemical Engineering Thermodynamics Laws of

thermodynamics. PVT relationships for pure components and mixtures. Energy functions and inter-

relationships - Maxwell's relations. Fugacity, activity and chemical potential. Vapour-liquid equilibria, for

ideal/non-ideal, single and multicomponent systems. criteria for chemical reaction equilibrium, equilibrium

constant and equilibrium conversions. Thermodynamic cycles - refrigeration and power. (c) Chemical

Reaction Engineering :29 Batch reactors - kinetics of homogeneous reactions and interpretation of kinetic

data. Ideal flow reactors - CSTR, plug flow reactors and their performance equations. Temperature effects and

run-away reactions. Heterogeneous reactions – catalytic and non-catalytic and gas-solid and gas-liquid

reactions. Intrinsic kinetics and global rate concept. Importance of inter-phase and intra-particle mass transfer

on performance. Effectiveness factor. Isothermal and non-isothermal reactors and reactor stability. Section B

(d) Chemical Technology Natural organic products - Wood and wood-based chemicals, pulp and paper, Agro

industries - sugar, Edible oils extraction (including tree based seeds), Soaps and detergents. Essential oils –

Biomass gasification (including biogas). Coal and coal chemical. Petroleum and Natural gas-Petroleum refining

(Atomospheric

distillation/cracking/reforming)

Petrochemical

industries

–

Polyethylenes

(LDPE/HDPE/LLDPE), Polyvinyl Chloride, Polystyrene. Ammonia manufacture. Cement and lime industries.

Paints and varnishes. Glass and ceremics. Fermentation - alcohol and antibiotics. (e) Environmental

Engineering and Safety Ecology and Environment. Sources of pollutants in air and water. Green house effect,

ozone layer depletion, acid rain. Micrometeorology and dispersion of pollutants in environment. Measurement

techniques of pollutant levels and their control strategies. Solid wastes, their hazards and their disposal

techniques. Design and performance analysis of pollution control equipment. Fire and explosion hazards rating

- HAZOP and HAZAN. Emergency planning, disaster management. Environmental legislations - water, air

environment protection Acts. Forest (Conservation) Act. (f) Process Engineering Economics :Fixed and

working capital requirement for a process industry and estimation methods. Cost estimation and comparison of

alternatives. Net present value by discounted cash flow. Pay back analysis. IRR, Depreciation, taxes and

insurance. Break-even point analysis. Project scheduling - PERT and CPM. Profit and loss account, balance

sheet and financial statement. Plant location and plant layout including piping.

ENVIRONMENTAL SCIENCE

PAPER-I

Environment, Ecology and Ecosystem Dynamics Unit I: Concept of environment, scope of

Environmental Science, environmental components, scope and subdivisions of ecology, ecological

principles pertaining to population, community, ecosystem and biome. Unit II: Population dynamics

and population regulations, concept of carrying capacity, population fluctuations, population dispersion,

r and k selection, ecotypes and ecophene, habitats and niches. Unit III: Energy in ecosystem, Primary

and secondary production, Biomass, Methods of measuring productivity, Pattern of primary production

in the major ecosystems of the world, Energy flow in ecosystems, Feedback and control mechanism,

Pathways of energy transfer- grazing and detritus food chain, Ecological efficiency and ecological

pyramids. Unit IV: Biogeochemical cycles: nutrient cycling in the ecosystems, Gaseous cycles

(Carbon and Nitrogen) and sedimentary cycles (Phosphorus and Sulphur), Impact of man on nutrient

cycles; Major ecosystems of the world: A general idea of forest, grassland, desert, wetland, freshwater

and marine ecosystems. Environmental Pollution Unit I: Types and sources of air, water and soil

झारखÖडगजट(असाधारण) गुǾवार, 14 माच[, 2024

pollution, monitoring of air and water pollution, noise pollution, impact of pollution on human health,

environment and assets; Water Pollution control technologies: Waste water treatment, primary

treatment, secondary treatment and Advance treatment. Unit II: Air pollution control technologies and

devices: Limestone injection and fluidized bed combustion, Desulfurization; Catalytic converter and

control of vehicular emission, Gravity settling chamber, Centrifugal collectors- cyclone collector and

dynamic precipitators; Electrostatic precipitators; Fabric filters. Unit III: Solid, Toxic, and Hazardous

waste management; solid waste disposal methods – open dumps, ocean dumping, Landfills,

Incineration; Recycling and reuse, Organic pollutants; pesticides- organochlorine insecticides,

organophosphates and carbamates; fertilizers, Hazardous waste disposal and management corporate

social Responsibility. Unit IV: Electronic waste (E-waste): Sources and types, constituents of E-

wastes, recycling of e- waste and its environmental consequences, Transboundary movement and

management of e-wastes, Basel convention, Radioactive wastes: Types, hazards, storage and

management. Environmental Microbiology, Biotechnology and Toxicology Unit I: Scope and

importance of microorganisms; Microorganism in different environments- soil, water, air and extreme

environments, Reproduction and growth, methods for determining bacterial numbers, Role of

microorganisms in waste treatment, Anaerobic (methanogenesis) and aerobic (trickling filter, activated

sludge, oxidation pond) treatment of wastewater, production of enzymes and alcohol. Unit II: Basic

techniques in genetic engineering: Nucleic acid hybridization and polymerase chain reaction as

sensitive detection methods, Gene cloning, Introduction of cloned genes into new hosts using plasmids

and phage vector systems, expression of genes in new host, Genetically Modified Organisms (GMOs)

and their possible environmental implications. Unit III: Principles in toxicology; Toxicants and

toxicity, Factors affecting concentration of toxicants in environment, Toxicity tests and concepts of

LD50 and LC50, Sources and types of toxicants and their health hazards, Dose-effect and Dose response

relationship, Absorption, translocation and excretion of toxicants. Environmental Impact

Assessment, Environmental Policies and Ethics Unit I: Introduction to environmental impact

assessment (EIA), origin and development of EIA, Environmental impact statement and environmental

management plan. EIA Notifications & Guidelines 1994, 2006, and 2009, Stages of granting

Environmental Clearance: Screening, Scoping, Public consultation, Appraisal & recommendations and

grant of environmental clearance and its validity. Unit II: Components of an EIA report; Generation of

baseline data & preparation of EIA report, procedure for reviewing EIA report, Authorities/ Institutions

involved in granting environmental clearance at Central & State Government levels. Unit III:

Environmental policy 2006, Environmental policy resolution, Legislation, Public policy strategies in

pollution control, International and National Conservation agencies, policies and strategies, Convention

on biodiversity, Convention on Climate change, Kyoto protocol, Carbon credit and Carbon trading.

Unit IV: Concept of environmental ethics, philosophies of biocentrism and ecocentrism, application of

ethics to environmental issues, eastern and western philosophical traditions/religious treatises on the

relationships between humans, animals, and the natural environment, value of wilderness.

Environmental Law Unit I: Basics of Law: Rights and Privileges ,Article 21 of the Constitution of

India, Acquisition of Rights Indian Penal code; Laws of Criminal procedure ,Cognizable and non –

cognizable offences, Search warrant; Indian Forests Act 1927: Application of Indian Penal code (Act

XLV of 1860 to forest offences, Land Acquisition Act ,1894 Forest Act :Salient features and

amendments.; Classification of forests as per IFA, 1927:Reserved forests (Sections 3, 4, 6, 7, 9, 10, 11,

13, 20, 23, 25, 26 and 27); Village forests (Section 28) and Protected forests (Sections 29, 30, 32),

Biological Diversity Act (2002) Forest (Conservation) Act, 1980.with explanations (amendments made

on the basis of verdict of the High Court and Apex court) Sixth schedule and Article 371A of the

Constitution of India: Vis-a Vis Forest Conservation Act,1980: A critical appraisal. Unit II:

Environment (Protection) Act, (1986) and Rules (1986); Water Prevention and control of Pollution Act,

1974; Air Prevention and control of Pollution Act, 1981, Disaster management act 2005; Disaster

management and administrative reforms. Salient features of Wildlife (Protection) Act, 1972: Protection

of specified plants (Sections 17A to 17H). Sanctuaries, National parks and Closed areas (Sections 18 to

38). Trade in wild animals, animal articles and trophies (Sections 39 to 41). Major amendments of

Wildlife (Protection) Act, 1972.

झारखÖडगजट(असाधारण) गुǾवार, 14 माच[, 2024

PAPER-II

Environmental Geoscience and Energy Unit I: Primary differentiation and formation of core, mantle,

crust, atmosphere and hydrosphere; Geomagnetism: remnant magnetization, paleomagnetism. Gravity

and figure of the Earth: mass inhomogeneties and associated gravity anomalies; Stress and Strain:

Definition, classification and types. Behavior of rocks under of stress and strain.Unit II: Seismology:

causes and space distribution of earthquakes; seismic waves; (body and surface waves), Precursors to the

earthquakes. Sea floor spreading; Plate tectonics theory: types of plate boundaries, processes and

corresponding geophysical and geological signatures; Himalayan tectonics. Unit III: Energy resources

and their exploitation. Energy: Conventional and non-conventional energy sources. Renewable sources

of energy- hydroelectric power, solar, tidal, wind, geothermal energy, biomass and biofuels.

Environmental impacts of conventional and renewable energy. Sun as source of energy, nature of solar

radiation, heat budget of the earth, earth’s temperature and atmosphere, Photovoltaics and Solar

collectors. Energy use pattern in India and the world. Unit IV: Concept of Minerals and Rocks. Atomic

minerals as a source of energy.Atomic fuel, radioactive wastes and their management, Fossil fuels-

physico-chemical characteristics and energy content of coal, petroleum and natural gases, Petroleum and

coal deposits of Northeast India.

Research Methods, Techniques and Statistical Analyses Unit I: Definition of applied science and

research. Classification of research. Critical appraisal of research studies, Planning research projects,

Advance planning and its value, Methods of data collection and analysis, interpretation and presentation.

Unit II: Sampling techniques: Sampling of air, water and soil, sampling of plant and animal populations,

concept of species area curve, concept of random and stratified sampling, Methods of Social Science

research, PRA. Unit III: Population and sample, frequency table, mean, mode, median, measure of

dispersion, standard deviation, variance, correlation, regression and prediction, multivariate analysis.

Test of significance- (Z & T test) variance in one and two sample cases. Test of equality of K– variance

(Bartlett’s test). Unit IV: Basic principles of field experimentation: Randomization, Replication and

Local Control. Lay out and analysis of data of completely Randomized block design, Latin square

designs, Factorial design, Split plot and Strip plot designs. Disaster Management Unit I: Introduction

and Concept of disasters and hazards related to Earthquakes, Tsunami, Volcanic eruption, Cyclones,

Floods, Drought, Landslides, Forest fires, Avalanches and Pest infestation. Prediction and perception of

hazards and adjustments to hazardous activities; Rates of natural cycles and residence time.Unit II:

Landslide: causes, prevention and correction. Landslide hazard mitigation. Earthquakes: intensity and

magnitude of earthquakes; geographic distribution of earthquake zones; precursors to the earthquakes,

seismic waves, travel-time and location of epicentre; nature of destruction; ground subsidence;

protection from earthquake hazards; do’s and don’ts during earthquake; Tsunamis- causes and

consequences. Unit III: Floods: Causes, nature and frequency of flooding: nature and extent of flood

hazard; urban floods, environmental effects of flooding; flood mitigation methods. Tropical cyclone-

formation and consequences.Coastal erosion; sea level changes and its impact on coastal areas. Drought:

Nature and effect on plant and animal systems. Study of pattern and mitigation of forest fires.Unit IV:

Geological and environmental investigations for the construction of dams, bridges, highways and

tunnels. Impact of major geotechnical projects on the environment. Disaster Management: Capability-

Vulnerability- risk- preparedness and mitigation- Disaster management cycle; Disaster Risk Reduction

and Resilience; Disaster Management Act and Policy.

Environmental Issues and Problems Unit I: Population growth, urbanization, growth of

vehicles and its impact on air quality. Changes in forest cover, biodiversity loss and conservation

measures, issues and concerns related to sacred forests and sacred groves. Impact of introduction of high

yielding varieties, use of fertilizers and pesticides, issues and problems associated with shifting

agriculture; Industrialization: environmental impacts of oil refineries, cement plants, paper mills, wood

based industries and tea industry. Unit II: Environmental impacts of coal and lime stone mining,

quarrying of sand from hills and rivers, Extraction of petroleum and natural gas; Environmental and

socio-economic implications of mega hydro electric projects; Issues relating to conservation of Ramsar

sites of north-east India: Loktaklake, Deeporbeel, Impact of tourism, social conflicts and environment.

Environmental Economics and Sociology Unit I: Introduction to Environmental Economics and

Natural Resource Accounting; Natural Goods and Services; Valuation methods of Natural Resources;

Valuation of tangibles and intangibles; Accounting of Forest, Land and Water resources; Natural

Resource Accounting and sustainable development; System of Environmental and Economic

Accounting, and Green Accounting. Unit II: Population growth of humans; Malthusian theory of

population; factors affecting human population growth and distribution; Impact of human population

झारखÖडगजट(असाधारण) गुǾवार, 14 माच[, 2024

growth on natural resources and environment, city and village ecosystem. Unit III: Environmental

sociology: concept of culture, inequality, gender and equity, interaction between society and

environment, environmental problems in historical perspective, individual interaction with environment

and impact thereof, social movements influencing environmental protection, society and resources

management, decision making. Unit IV: Communication: definition, models, characteristics, process

and approach, learning experience, principles and types, learning in groups, group defined, group size

and characteristics, task and techniques: Snowball groups and Buzz group. Motivation: definition,

models; Training- concept, type and steps required to be followed to train different level of

functionaries. .

---------

अधी¢क

अधी¢क, झारखÖड

झारखÖड राजकȧय मुġणालय

राजकȧय मुġणालय, राँची ɮवारा Ĥकाͧशत एवं मुǑġत

राँची ɮवारा Ĥकाͧशत एवं मुǑġत,

झारखÖड गजट

झारखÖड गजट (असाधारण

असाधारण)

) 154 – 50