PART III
Stores Purchase
Agriculture Department
Z¿Lmkv ]ckyw
\º¿ Fkv.hn.F^v.28/2015˛16.
2015 BKÃv 5.
h≠n-s∏-cn-bm¿ ]®-°dn tXm´-Ønse Bh-iy-Øn-\mbn
Xmsg -]-d-bp∂ Xq°-Ønepw FÆ-Ønepw Ib¿]nØ
ItºmÃv, t{Km _mKv (B-h-iy-amb tcJ-s∏-Sp-Ø-ep-Iƒ
\S-Øn) hnX-cWw sNøp-∂-Xn\v k∂-≤-X-bp≈
IcmdpIm-cn¬\n∂pw ap{Z-sh® Z¿Lm-kp-Iƒ £Wn-®p-
sIm-≈p∂p. Z¿Lm-kp-Iƒ ka¿∏n-°p∂ Ih-dn\v ]pdØv
“2015˛--16 h¿jtØ°v Ib¿]nØv ItºmÃv, t{Km_m-Kp-Iƒ
hnX-cWw sNøp-∂-Xn-\p≈ Z¿Lmkv” F∂v tcJ-s∏-SpØn
^mw kq{]-≠ns‚ hnem-k-Øn¬ 2015 sk]v‰w-_¿ 17 ]I¬
11 aWn-°Iw ^mw Hm^o-kn¬ e`n-®n-cn-°-Ww. Z¿Lm-kn¬
]d-™n-cn-°p∂ \nc°v Ib-‰n-d°p Iqen klnXw
62-˛mw ssaen¬ ÿnXn sNøp∂ ^man¬ kssπ sNøp-∂-Xn-
\p-≈-Xm-bn-cn-°-Ww. Z¿Lm-kn-t\m-sSm∏w ` 5,000 ^mw
kq{]-≠ns‚ t]cn¬ Fkv. _n. ‰n. h≠n-s∏-cn-bm¿
imJ-bn¬ amdm-hp∂ Unam‚ v {Um^v‰v IqSn \nc-X-{Z-hy-ambn
\¬tI-≠-Xm-Wv.
Z¿Lmkv AwKo-I-cn®v kssπ Hm¿U¿ \¬In-bm¬
7 Znh-k-Øn-\Iw Z¿Lm-kn¬ ]d-™n-cn-°p∂ D¬]-∂-߃
hnX-cWw sNtø-≠-Xm-Wv. 17-˛9-˛2015-˛\v D®bv°v 12 aWn°v
Z¿Lm-kp-Iƒ At∏mƒ lmP-cp≈ sS≥U¿Im-cp-sStbm
Ah-cpsS {]Xn-\n-[n-I-fp-sStbm km∂n-≤y-Øn¬ ^mw
kq{]t≠m At±lw A[n-Im-c-s∏-Sp-Øp∂ DtZym-K-ÿt\m
Xpd-°p-∂Xpw G‰hpw Ipd™ \nc°v {]n≥kn-∏¬ Irjn
Hm^o-k¿, CSp-°n-bpsS AwKo-Im-c-Øn\v hnt[-b-ambn
Dd-∏n-°p-∂-Xp-am-bn-cn°pw. Z¿Lmkv Xpd-°p∂ Znhkw
GsX-¶nepw Imc-W-h-im¬ Ah[n Znh-k-am-bm¬ sXm´-SpØ
{]hrØn Znhkw apI-fn¬ ]-d™ hyh-ÿ-bnepw
ka-bØpw Z¿Lm-kp-Iƒ hmßp-∂-Xpw Xpd-°p-∂-Xp-
am-bn-cn°pw. Z¿Lmkv ssIs°m-≈p-∂-bmƒ ` 100˛s‚
ap{Z]{XØn¬ Icm¿ DS-ºSn H∏phbvt°-≠-Xm-Wv.
Z¿Lmkv t^md-Øns‚ hne ` 400˛w hn¬]\
\nIp-Xn-bp-am-bn-cn°pw Z¿Lmkv t^md-Øns‚ hn¬]\
17-˛9-˛2015- ]I¬ 10.30 aWn hsc-bm-bn-cn-°pw.
©
tIcf k¿°m¿
Government of Kerala
2015
tIcf Kkddv
KERALA GAZETTE
B[nImcnIambn {]kn≤s∏SpØp∂Xv
PUBLISHED BY AUTHORITY
Regn. No. KERBIL/2012/45073
dated 5-9-2012 with RNI
Reg. No. KL/TV(N)/634/2015-17
Xncph\¥]pcw,
sNmΔ
Thiruvananthapuram,
Tuesday
hmeyw 4
Vol. IV
2015 sk]v‰w-_¿ 15
15th September 2015
1191 Nnßw 30
30th Chingam 1191
1937 `m{Zw 24
24th Bhadra 1937
36
\º¿
No.
}
}
15th SEPT. 2015]
STORES PURCHASE
1090
k¿°m¿ Z¿Lm-kp-Iƒ°v _m[-I-amb F√m
\n_-‘-\-Ifpw Cu Z¿Lm-kn\pw _m[-I-am-bn-cn°pw.
Z¿LmkpIƒ bmsXmcp Imc-Whpw ImWn-°msX
\nc-kn-°p-∂-Xn\pw ]p\¿Z¿Lmkv \S-Øp-∂-Xn-\pap≈
A[n-Imcw ^mw kq{]-≠n¬ \n£n-]vX-am-bn-cn-°pw. IqSp-X¬
hnh-c-߃ {]h¿Øn Znh-k-ß-fn-ep≈ ka-b-ß-fn¬
^mw Hm^o-kn¬ \n∂pw Adn-bm-hp-∂-Xm-Wv.
Bh-iy-ap≈ Dev]-∂-ß-fpsS hnhcw
1. t{Km_mKv—15000 \º¿ (40" × 24" × 24" sskkv,
600 tKPv, 150 ssat{Im¨ I\w Bh-iy-amb
tcJ-s∏-Sp-Ø-ep-Iƒ \S-Øn-bn-´p-≈-h).
2. Ib¿ ]nØv ItºmÃv—10 sa{SnIv S¨.
kwÿm\ ]®-°-dn-tØm-´w,
(H∏v)
h≠n-s∏-cnbm¿.
^mw kq{]-≠v.
Z¿Lmkv ]ckyw
\º¿ _n.228/2015.
2015 BKÃv 10.
s\√n-bm-ºXn Kh¨sa‚ v Hmd©v B‚ v shPn-‰-_nƒ
^man-t\m-S-\p-_-‘n®v {]h¿Øn-°p∂ ]g kwkvI-c-W
-im-e-bn¬ D¬]m-Zn-∏n-°p∂ D¬]-∂-߃ \nd-bv°p-∂-Xn\v
Bh-iy-amb Xmsg hnh-cn-®n-´p≈ km[-\߃ hnX-cWw
sNøp-∂-Xn-\mbn Xm¬]y-ap-≈-h-cn¬\n∂pw a’-c-
kz-`m-h-ap≈ ap{Z-h® Z¿Lm-kp-Iƒ £Wn-®p-sIm-≈p-∂p.
{Ia
km[-\-Øns‚ t]cpw
FÆw
\º¿
AS-¶¬ XpIbpw
1
700 an√n ¢nb¿ sh¿Pn≥ πmÃnIv s]‰v
t_m´n¬ Npcp-ßn-bXv 30 {Kmw Xq°-ap-≈Xv
28 mm PP PCO White Colour AS∏v klnXw—
` 4,75,000
60000
2
500 {Kmw ¢nb¿ sh¿Pn≥•mkv Pm¿
{]n‚ v sNbvX AS∏v klnXw—` 4,50,000
25000
\nc-X-{Z-hyw—1 %
Z¿Lmkv {]am-W-߃ 10-˛8-˛2015-˛\v cmhnse 10 aWn-
ap-X¬ 6˛10-˛2015 Hcp aWn-hsc ` 1,500˛w hm‰pw
AS®v At]-£n-°p-∂-h¿°v Cu Hm^o-kn¬\n∂pw
hnX-cWw sNøp-∂Xpw ]qcn-∏n® Z¿Lm-kp-Iƒ 6˛10-˛2015
]I¬ 2 aWn-hsc kzoI-cn-°p-∂Xpw At∂-Zn-hkw ]I¬
3 aWn°v (A-t∂-Zn-hkw Ah-[n-bm-bm¬ sXm´-SpØ
{]hr-Øn-Zn-h-kw) At∏mƒ lmP-cp≈ Icm-dp-Im-cpsS
km∂n-≤y-Øn¬
Xpd-°p-∂Xpw
G‰hpw
Ipd™
\nc°v tcJ-s∏-Sp-Ønb Z¿Lmkv tae-[n-Im-cn-I-fpsS
AwKo-Im-c-Øn\phnt[-b-ambn ÿnc-s∏-Sp-Øp-∂-Xp-am-Wv.
Z¿Lmkv {]am-W-tØm-sSm∏w ` 200˛s‚ ap{Z-]-{X-Øn¬
\n›nX amXr-I-bn-ep≈ {]mY-anI DS-ºSn D≈-S°w
sNbvXn-cn-°Ww. Hmtcm km[-\-Øn\pw {]tXyIw sS≠¿
ka¿∏n-t°-≠-Xm-Wv.
Ih-dn\p
apI-fn¬
ksπ
sNøm≥ Dt±-in-°p∂ km[\w GsX∂v hy‡-ambn
Fgp-Xn-bn-cn-°Ww. Z¿Lm-kn¬ \nIp-Xn-b-S°w Hcp
t_m´n-ens‚/Pmdns‚ hne {]tXyIw tcJ-s∏-Sp-tØ-≠-Xm-Wv.
Z¿Lmkv AwKo-I-cn-®-Xmbn Adn-bn∏p e`n-®m¬ Izm´p
sNbvX XpI-bpsS 5% s]¿t^m-a≥kv skIyq-cn-‰n-bmbn
(\n-c-X-{Zhyw Dƒs∏-sS) kq{]≠v, Kh¨sa‚ v Hmd©v &
shPn-‰-_nƒ ^mw, s\√n-bm-º-Xn-bpsS t]cn¬ Fkv. _n. ‰n.
s\∑md
{_m©n¬
amd-Ø°hn[w
DD-bmbn
ka¿∏n-t°-≠Xpw 10 Znh-k-Øn-\Iw km[-\-߃ kz¥w
sNe-hn¬ ^man¬ FØn-®p-X-tc-≠-Xpam-Wv.
Bb-Xn\p hn]-co-X-ambn {]hr-Øn®v k¿°m-cn\v
Fs¥-¶nepw \jvSw hcp-Øn-bm¬ Sn \jvSw Z¿Lm-kp-
Im-c-\n¬\n∂pw dh\yq dn°-hdn BIvSv {]Imcw
hkq-em-°p-∂-Xm-Wv.
k¿°m¿ Z¿Lm-kp-Iƒ°p≈ F√m \n_-‘-\-Ifpw
Cu Z¿Lm-kn\pw _m[-I-am-bn-cn-°pw. IqSp-X¬
hnh-c-߃ {]hrØn Znh-k-ß-fn¬ ^mw Hm^o-kn¬ \n∂pw
Adn-bm-hp-∂-Xm-Wv.
Kh¨sa‚ v Hmd©v B‚ v
shPn-‰-_nƒ ^mw,
(H∏v)
s\√n-bm-ºXn.
kq{]≠v.
Ayurveda Medical Education Department
Z¿Lmkv ]ckyw
[\º¿ 24/2015-˛16]
\º¿ Fkv1-/5722/2015/F.hn.kn.
2015 BKÃv 12.
Xncp-h-\-¥-]pcw Kh¨sa‚ v Bbp¿thZ tImtfPnse-
hnhn[ Un∏m¿´p-sa‚p-I-fn-te°pw Un. Fkv. bp. F∂n-hn-S-
ß-fn-te°pw Bhiyamb sIan-°-ep-Iƒ hnXcWw
sNøp-∂-Xn\v Xøm-dp≈-h-cn¬\n∂pw ap{Zh® Z¿Lm-kp-Iƒ
£Wn-®p-sIm-≈p-∂p.
AS-¶¬ XpI—` 3,00,000.
Hmtcm Z¿Lm-kp-Ifpw Bbp¿thZ tImtfPv {]n≥kn-∏mfns‚
ta¬hnem-k-Øn¬ {]tXyIw Ih-dnem°n ko¬ sNbvXv
Ihdn\p]pdØv ""Xncp-h-\-¥-]pcw Kh¨sa‚ v Bbp¿tΔZ
tImtfPv˛hnhn[ Un∏m¿´p-sa‚p-I-fn-te°v Bh-iy-amb
sI-an-°-ep-Iƒ hnX-cWw sNøp-∂-Xn\v ÿm]n-°p-∂-Xn-\p≈-
Z¿Lmkv'' F∂v tcJ-s∏-Sp-Øn 22˛9˛2015, 3 aWn hsc
ka¿∏n-°mhp∂-Xm-Wv. 22˛9˛2015 D®-bv°ptijw
3.30 aWn°v Z¿Lm-kp-Iƒ \nb-am-\p-k-cWw Xpd-°p-∂-Xm-bn-
cn-°pw. bmsXmcp Imc-Wh-imepw Z¿Lmkv t^md-߃
ssIam‰w sNøm≥ ]mSn-√m-Ø-Xm-Ip-∂p. Z¿Lmkv
t^md-ß-fpsS hn¬∏\ 21˛9-˛2015 D®bv°ptijw 3 aWn°v
Ah-km-\n-°p-∂-Xm-Wv. t^md-߃ X]m¬am¿§w Bh-iy-
ap≈-h¿ Z¿Lmkv t^md-Øns‚ hne-tb-°mƒ ` 50 IqSp-X¬
aWntbm¿U-dmbn Abbv-t°-≠-Xm-Ip-∂p. Z¿Lm-kn¬
tcJ-s∏-Sp-Øn-bn-c-n°p∂ hne \nc-°p-Iƒ Z¿Lmkv
AwKoIcn®v \¬Ip∂ XobXn apX¬ Hcp h¿jw
hsc-bp≈
Ime-b-f-hn-\p≈n¬
am‰whcpØm≥
]mSn√mØXmIp∂p. Hcp Z¿Lm-kns‚ hne ` 945 B-Wv
(` 900 + hm‰v ` 45). Uyq-πn-t°‰v t^md-Øns‚
hne ` 473.
340
15th SEPT. 2015]
STORES PURCHASE
1091
]qcn-∏n® Z¿Lmkv t^md-Øn-t\m-sSm∏w tcJs∏SpØnb
XpIbpsS 1% \ncX{Zhyambn Xncp-h-\-¥-]pcw Bbp¿thZ
tImtfPv {]n≥kn-∏m-fns‚ t]cn¬ FSpØ Unam‚ v
{Um^v‰pw ` 100˛s‚ tIcf kwÿm\ ap{Z-∏-{X-Øn¬
tcJ-s∏-Sp-Ønb Hcp {]nenan\dn F{Kn-sa‚pw lmP-cm-t°-≠-
Xm-Wv. GsXmcp sS≠dpw ImcWw ImWn-°msX
\nc-kn-°m-t\m
am‰nhbv°mt\m
D≈
A[n-Imcw
Xncp-h-\-¥-]pcw Bbp¿thZ tImtfPv {]n≥kn-∏m-fn¬
\n£n-]vX-am-bn-cn-°pw. GsX-¶nepw Imc-W-Øm¬ 22˛9-˛2015˛\v
k¿°m¿ Ah[n {]Jym-]n-°p-I-bm-sW-¶n¬ ASpØ
{]hrØn Znhkw AtX kabw Z¿LmkpIƒ Xpd-°p-∂-Xm-
bn-cn-°pw. IqSpX¬ hnhc߃ tImtfPv Hm^okn¬ \n∂v
Adnbmhp∂XmWv.
[No. 24/2015-16]
No. S1-5722/2015/AVC.
12th August 2015.
Sealed competitive tenders are invited for the “Supply
of Chemicals and other Lab items” as per the list
appended herewith for the Departments of Government
Ayurveda College, Thiruvananthapuram and Drug
Standardisation Unit of Government Ayurveda College for
the year 2015-16 (list attached). Brand name and Pack size
should be mentioned in the tender.
Estimate cost—` 3,00,000.
Tenders should be superscribed “Supply of
Chemicals and other Lab items”as per the list appended
herewith for the Departments of Government Ayurveda
College, Thiruvananthapuram and Drug Standardisation
Unit
of
Government
Ayurveda
College,
Thiruvananthapuram addressed to the Principal,
Government Ayurveda College, Thiruvananthapuram.
The last date of the receipt of tenders will be at 3 p. m.
on 22-9-2015. The late tenders will not be accepted. The
tenders will be opened at 3.30 p. m. on 22-9-2015 in the
presence of such of the tenderers or their authorized
representatives who may be present at that time.
Intending tenderers may on application to the
Principal, Govt. Ayurveda College, Thiruvananthapuram to
obtain tender forms on which tenders should be
submitted. Application for the tender forms should be
accompanied by cash remittance of ` 945 (cost of tender
form ` 900 + VAT ` 45) which is the price fixed for a form
and which is not refundable under any circumstances.
Tender forms are not transferable. Sale of tender forms will
be closed at 3 p. m. on 21-9-2015. Cheque, Postal Orders etc.
will not be accepted towards the cost of forms. Those who
wish to purchase tender forms by post shall send an
additional amount of ` 50 by money order to cover
postal charges. Duplicate tender forms, if required will be
issued at ` 473.
Intending tenderers should submit an amount of 1%
of the quoted amount as Earnest Money Deposit by
Demand Draft in favour of the Principal, Government
Ayurveda College, Thiruvananthapuram together with an
agreement in Kerala Stamp Paper worth ` 500. The rate
quoted shall remain firm for acceptance till one year from
the date of acceptance. The Principal, Ayurveda College,
Thiruvananthapuram will have the powers to postpone/
cancel the tender. If Government have declared
22-9-2015 as a public holiday, the tender will be opened at
the same time on next working day. Further details can be
had from the office during office time.
Office of the Principal,
Government Ayurveda College,
DR. P. K. ASOK,
Thiruvananthapuram.
Principal.
Collegiate Education Department
Z¿Lmkv ]ckyw
\º¿ F4-/377/2015.
2015 BKÃv 18.
]p√q‰v sI.-sI.-Sn.-Fw. Kh¨sa‚ v tImtf-Pnse hnhn[
hn`m-K-ß-fnse et_m-d-´-dnIƒ-°m-h-iy-amb GI-tZiw
` 10,00,000-˛s‚ D]-I-c-W-ßfpw sIan-°¬kpw \¬Ip-∂-Xn\v
ap{Zsh® Z¿Lm-kp-Iƒ £Wn-®p-sIm-≈p-∂p. Z¿Lmkv
AS°w sNbvX Ih-dn\v ]pdØv πm≥ ^≠v 2015-˛16
{]Imcw em_v D]-I-c-W-ßfpw sIan-°¬kpw \¬Ip-∂
-Xn-\p≈Z¿Lmkv F∂v Fgp-Xn-bn-cn-t°-≠Xpw, {]n≥kn-∏mƒ,
sI.-sI.-Sn.-Fw. Kh¨sa‚ v tImtf-Pv, ]p√q‰v ]n. H.,
Xr»q¿ Pn√, ]n≥-˛680 663 F∂ hnem-k-Øn¬ Ab-bvt°
-≠-Xpam-Wv. Z¿Lmkv kzoI-cn-°p∂ Ah-km\ Znhkw
5˛10-˛2015 ]I¬ 2 aWn-hsc Bbn-cn°pw. ta¬
ka-b-Øn-\p-≈n¬ e`n-°p∂ Z¿Lm-kp-Iƒ At∂Znhkw
]I¬ 3 aWn°v At∏mƒ lmP-cp≈ Z¿Lm-kp-I-mcp-sS-tbm
Ah¿ A[n-Im-c-s∏-Sp-Øn-bn-´p≈ hy‡n-I-fp-sStbm
km∂n-≤y-Øn¬ Xpd-°p-∂-Xm-Wv. sshIn e`n-°p∂
Z¿Lm-kp-Iƒ bmsXmcp Imc-W-h-imepw kzoI-cn-°p-∂-X-√.
\n¿±njvS t^md-Øn-emWv Z¿Lm-kp-Iƒ ka¿∏n-t°-≠-Xv.
{]kvXpX t^md-Øn\v ` 1,500 + VAT {]Imcw AS®v
At]-£n-t°-≠-Xm-Wv. t^md-Øns‚ hne aWn-tbm¿U-dmbn
kzoI-cn-°p-∂-XmWv. F∂m¬ {Um^v‰v, sN°v, t]mì
Hm¿U¿ F∂nh hne-bmbn kzoI-cn-°p-∂-X-√. Z¿Lmkv
t^md-Øns‚ ]I¿∏v Bh-iy-ap-s≠-¶n¬ ]I¿∏v H∂n\v
` 800 + VAT {]Imcw AS®v At]-£n-t°-≠-Xm-Wv. Z¿Lm-kv
t^m-d-w ssIam‰w sNøm≥ ]mSp-≈-X-√. Z¿Lm-kv
t^md-Øns‚ hnev]\ 5˛10-˛2015 ]I¬ 12 aWn°v
Ah-km-\n°pw. Z¿Lmkv t^mdw X]m-en¬ e`n-°-W-sa∂v
Xm¬-]-cy-ap-≈-h¿ Bhiyamb X]m¬ Ãmºv H´n®v
ta¬hnemkw FgpXnb I-h¿ At]-£-tbm-sSm∏w
Abbv-t°-≠-Xm-Wv.
15th SEPT. 2015]
STORES PURCHASE
1092
No. A4/377/2015/Lab.
18th August 2015.
Sealed tenders are invited for the supply of Lab
equipments and Chemicals for an amount of ` 10,00,000 to
K.K.T.M. Government College, Pullut P. O., Thrissur
District, Pin-680 663 under Plan Fund 2015-16.
Tender should be superscribed “Tender for the
Supply of Lab equipments and Chemicals to the College
under plan Fund 2015-16” and should be addressed to the
Principal, K. K. T. M. Government College, Pullut P. O.,
Thrissur District, Kerala State, Pin-680 663. Last date of the
receipt of tenders will be at 2 p. m. on 5-10-2015. Late
tenders will not be accepted. Tender will be opened at
3 p. m. on 5-10-2015 in the presence of such tenderers or
representatives who may be present at that time.
Intending tenderers may on application to the
Principal, K. K. T. M. Government College, Pullut P. O.,
Thrissur District, Kerala State, Pin-680 663 to obtain the
requisite tender forms on which tenders should be
submitted. Application for the tender form should be
accompanied by a cash remittance of ` 1,500 +VAT
which is the price fixed for a tender form and is not
refundable under any circumstances. Sale of tender forms
will be closed at 2 p. m. on every day. The tender forms
are not transferable. Cheques, Postal Orders, Demand
Drafts etc. will not be accepted towards the cost of tender
form or will not be sent by V. P. P. Sale of tender form will
be closed at 12 noon on 5-10-2015.
Duplicate forms if required will be issued at
` 800+VAT per copy. Those who wish to receive the
tender forms by post may send a self addressed,
sufficiently stamped envelope in addition to the cost of
tender forms.
K. K. T. M. Government College,
(Sd.)
Pullut, Kodungallur.
Principal.
Z¿Lmkv ]ckyw
[\º¿ 05/2015˛16]
\º¿ F1˛916/2015/kn.sF.-bp.]n.(1)
2015 BKÃv 20.
ae-∏pdw Kh¨sa‚ v tImtf-Pnte°v 2015-˛16 kmº-ØnI
h¿j-Ønse
πm≥
kvIoan¬
`
2,80,000-˛s‚
aƒ´n-Pnw-t\jyw ÿm]n-°p-∂-Xn-\p≈ km[-\-߃ hnX-cWw
sNøp-∂-Xn\v Xøm-dp-≈-h-cn¬ \n∂pw ap{Z-sh® Z¿Lm-kp-Iƒ
£Wn-®psIm≈p-∂p. Z¿LmkpIƒ AS°w sNbvX
Ih-dn\v apI-fn¬ “aƒ´n-Pnw-t\jyw ÿm]n-°p-∂-Xn-\p≈
km[-\-߃ hnX-cWw sNøp-∂-Xn-\p≈ Z¿Lmkv”
Fs∂-gpXn {]n≥kn-∏mƒ, Kh¨sa‚ v tImtfPv, ]n. H.
ap≠p-]-dºv, ae-∏pdw Pn√, tIc-fw, ]n≥tImUv-˛676 509
F∂ hnemk-Øn¬ Abbv-t°-≠-Xm-Wv. Z¿Lm-kp-Iƒ
kzoI-cn-°p-∂ Ah-km\ XobXn 30˛9˛2015 D®bv°ptijw
1 aWn-hscbmIp-∂p. Z¿Lm-kp-Iƒ At∂ Znhkw D®-bv°p-
tijw 2.30 aWn°v Xpd-°p-∂-Xm-Wv. ]qcn-∏n® A ¬
Z¿Lm-kp-Iƒ am{Xta kzoI-cn-°p-I-bp-≈q. Z¿Lmkv t^mdw
e`n-°p-∂Xn\v Xmsg ImWn® hnem-k-Øn¬ At]-£n-
t°-≠-Xm-Wv. At]£tbmsSm∏w Z¿Lmkv t^md-Øns‚
hne-bmb ` 630 (aqey h¿≤nX \nIpXn Dƒs∏sS)
Ab-bvt°-≠-Xm-Wv. (Uyqπn-t°‰v t^md-Øns‚ hne ` 315)
{]kvXpX kwJy bmsXmcp Imc-W-h-imepw aS-°n -
sImSp°p∂-X-√. Z¿Lmkv t^md߃ ssIam‰w sNøm≥
]mSp-≈-X-√. Z¿Lmkv t^md-Øns‚ hn¬]\ 30˛9˛2015
D®bv°v 12 aWn°v Ah-km-\n-°p-∂-Xm-Wv. Z¿Lmkv t^md-
Øns‚ hne-bmbn sN°pIƒ, {Um^v‰p-Iƒ F∂nh
kzoI-cn°p-∂-X-√. Z¿Lm-kpIƒ hn.-]n.-]n. Bbpw
Abbv°p∂-X-√.- Z¿L-mkv cPn-tÿUv X]men¬
e`n-°p-hm≥ Hdn-Pn-\¬ Z¿L-mkv t^m-d-Øns‚ hne-bpw,
cPn-tÿUv X]m¬ Nm¿÷pw Dƒs∏sS ` 662
aWn-tbm¿U-dmbn Abbvt°-≠-Xm-Wv. Z¿Lm-kv t^md
Øns‚ IqsS ` 500 hne-bp≈ tIcf ap{Z-]-{X-Øn¬ Icm¿
FgpXn ka¿∏n-t°-≠-Xm-Wv. tIc-f-Øn\v ]pd-Øp≈
ÿm]-\߃ sS≠¿ t^mdw X]m-en¬ e`n-°m≥ sS≠¿
t^mdØns‚ hne-bpsS IqsS tIcf ap{Z-]-{X-Øns‚
hne-bmb ` 500 IqSn A[n-I-ambn Ab®pXtc-≠-Xm-Wv.
km[-\-߃ hnX-cW DØ-chv e`n®v 30 Znh-k-Øn-\Iw
tImtf-Pnse ^nkn-°¬ FUyq-t°-j≥ Un∏m¿´p-sa‚n¬
kz¥w sNe-hn¬ FØn-t°-≠-Xm-Wv. Htcm km[-\-Øn-
s‚bpw hne\nc°pw hn¬]\ \nIp-Xnbpw a‰v D]m-[n-Ifpw
{]tXy-I-ambn ImWn-t°-≠-Xm-Wv. hne \ne-hm-c-Øn\v
31-˛3-˛2016 hsc {]m_-ey-ap-≠m-bn-cn-°p-∂-Xm-Wv.
-Z¿Lmkv t^md-Øns‚ IqsS ‘\nc-X-{Z-hy-ambn’
hnX-cWw sNøm-\p-t±-in-°p∂ km[-\-ß-fpsS hne-bpsS Hcp
iX-am\w \nc-°n¬ hcp∂ XpIbv°v {]n≥kn-∏m-fns‚
t]cn¬ Fkv. _n. Sn., ae-∏pdw, knhn¬ kvt‰j≥
{_m©n¬\n∂v amdm-hp∂ Unam‚ v {Um^v‰v AS°w
sNtø-≠-XmWv. \nc-X-{Zhyw ASbv°p∂-Xn¬\n-∂pw
Hgnhm-°n-bn-´p-s≠-¶n¬ Iº-\n-Iƒ Hgn-hm-°nb DØ-c-hns‚
km£y-s∏-Sp-Ønb ]I¿∏v AS°w sNtø-≠-Xm-Wv. G‰hpw
Npcp-ßnb \nc-X-{Z-hy-XpI ` 1,500 (Bbn-cØn A™qdv)
BWv. aXn-bmb \nc-X-{Zhyw AS°w sNømØ Z¿Lm-kp-Iƒ
\nc-kn-°p-∂-Xm-Wv. \ncX-{Z-hy-Øn\v ]eni e`n-°p-∂-X-√.
hni-Z-hn-h-c-߃ Hm^okv {]hrØn ka-bØv t\cn´v
At\z-jn®v Adn-bm-hp-∂-Xm-Wv.
bmsXmcp ap∂-dn-bn∏pw IqSmsX Z¿Lmkv am‰p-hmt\m
d±m-°p-hmt\m D≈ A[n-Imcw Xmsg H∏n-´n-´p≈ Bfn¬
\n£n-]vX-am-Wv.
[No. 05/2015-16]
No. A1-916/2015/CIUP (1).
20th August 2015.
Sealed tenders are invited for the supply of Items for
setting up of Multigymnasium to Government College,
Malappuram for Total Cost of ` 2,80,000 under 2015-16
Plan Scheme. The envelope containing the tender should
be superscribed “Items for setting up of Multigymnasium”
and addressed to the Principal, Government College,
Munduparamba P. O., Malappuram District, Kerala,
Pin-676 509. The last date of receipt of tender is at
1 p. m. on 30-9-2015. Late tenders will not be accepted
at any account. The tenders will be opened at 2.30 p. m.
on the same day. The intending tenderers may make an
application to the Principal to obtain the requisite tender
form, in which tenders should be submitted. The original
tender form duly filled only will be accepted.
342
15th SEPT. 2015]
STORES PURCHASE
1093
Application for the tender form should be
accompanied by a cash remittance of ` 630 (Including
VAT). Rate of duplicate tender form is ` 315, which is
the price fixed for a tender form and which is not
refundable under any circumstances. The tender forms
are not transferable. Sale of tender forms will be closed at
12 Noon on 30-9-2015. Cheques, Drafts and postal orders
will not be accepted towards the cost of tender form and
the tender form will not be sent by V.P.P. Those who
require tender form by registered post should sent the
cost of tender form ` 662 including postal charges for
registered post by money order. Every tender should be
accompanied by an agreement in the Kerala Stamp Paper
worth ` 500. Those firms outside Kerala want to get
tender form by post will be sent ` 500 as cost of Kerala
Stamp Paper along with the cost of tender form. The
articles should be supplied within 30 days on receipt of
the purchase order in the Physical Education Department
of this College at your expenses.
The period of firmness of rate quoted will be upto
31-3-2016. Rates, S. T. and condition of supply of articles
should clearly be stated separately in respect of each of
them.
The tenders should be accompanied by an EMD 1%
(one percent) of the quoted value in the form of
Demand Draft in favour of the Principal payable at SBT,
Civil Station Branch, Malappuram. The minimum EMD
should be ` 1,500 (One Thousand Five Hundred only).
Tenders without sufficient EMD are liable to be rejected.
EMD will not carry any interest. The firm who are
exempted from furnishing EMD should be enclosed the
attested copy of exemption order. More details can be
had from the college office during the working days.
The undersigned will have the right to cancel or
extend the tender at any time without further notice.
Government College,
Munduparamba P. O.,
(Sd.)
Malappuram-676 509.
Principal.
]p\¿ Z¿Lmkv ]ckyw
\º¿ F2/1011/2013.
2015 BKÃv 19.
tImgn-t°mSv Kh¨sa‚ v B¿Svkv & kb≥kv
tImtf-Pnse bp. Pn. kn. XII πm≥ ^≠v (tIm-tfPv
sUh-e-∏vsa‚ v Akn-Â vkv) ` 2,00,000 D]-tbm-Kn®v
aqhn Iymad hnX-cWw sNøp∂-Xn\v ap{Z-h® Z¿Lm-kv
£Wn-®p-sIm-≈p-∂p.
Z¿Lm-kp-Iƒ Abbv°p∂ Ih-dn\p apI-fn¬
tImgn-t°mSv Kh¨sa‚ v B¿Svkv & kb≥kv
tImtf-Pnte°v D]-I-c-W-߃ hnX-cWw sNøp-∂-Xn-\p≈
]p\x-Z¿Lmkv
F∂v
Bte-J\w
sNtø-≠-Xpw,
{]n≥kn-∏mfns‚ t]cn¬ Ab-bvt°-≠-Xp-am-Ip-∂p.
Z¿Lm-kp-Iƒ 22˛9˛2015˛\v D®bv°v 12 aWn-hsc am{Xw
kzoI-cn-°p∂Xpw
At∂Zn-hkw
2
aWn-°v
Xpd-°p-∂-Xp-am-Ip∂p.
Z¿Lmkv t^md-߃ 22˛9-˛2015˛-\v cmhnse 11 aWn-hsc
tImtfPv Hm^o-kn¬\n∂v e`n-°p-∂-Xm-Wv. Z¿Lmkv
t^md-Øns‚ hne- 420 cq]-bpw, (\nIpXn Dƒs∏-sS)
Uyqπn-t°‰v
tIm∏n-bpsS
hne
210
cq]-bpw
(\nIpXn Dƒs∏-sS) BWv. X]m-en¬ Bh-iy-ap-≈-h¿
Z¿Lmkv t^md-Øns‚ hnebpw, \n-Ip-Xn-bpw, cPn-kvt{SUv
X]m-en¬ e`n-°p-∂-Xn-\p-th≠ X]m¬ Nm¿÷pw
AS-°-ap≈ XpIbv°v (470 cq]) aWn-tbm¿U¿
Ab-bvt°-≠-Xm-Wv. Z¿Lmkv t^md-߃ ssIam‰w
sNøp-hm≥
]mSp-≈-X-√.
-hn-X-cWw
sNtø≠
km[-\-km-a-{Kn-I-fpsS ]´n-I Z¿Lmkv t^md-Øn-s\m∏w
e`n-°p-∂-Xm-Wv.
Z¿Lmkv t^md-Øn-s\m∏w ` 500˛s‚ tIcf k¿°m-cns‚
ap{Z-]-{X-Øn¬ DS-º-Sn-bpw ` 2000 \nc-X-{Z-hyhpw
\¬tI-≠-Xm-Wv. \n›nX kab]cn-[n-°ptijw In´p-∂-Xpw,
\nc-X-{Zhyw IqsS-bn-√m-Ø-Xpw, ap{Z-]-{X-Øn¬ DS-ºSn
ka¿∏n-°m-Ø-Xp-amb Z¿Lm-kp-Iƒ \nc-kn-°p-∂-Xm-Wv.-
\n-c-X-{Zhyw Hgn-hm-t°-≠-h¿ _‘-s∏´ tcJ-Iƒ IqsS
ka¿∏n-t°-≠-Xm-Wv. -\n-Ip-Xn-bpƒs∏-sS-bp≈ hne-bmWv
Z¿Lm-kn¬ tcJ-s∏-Sp-tØ-≠-Xv. X°-Xmb Imc-Ww -Iq-Sm-sX,
Z¿Lm-kp-Iƒ \nc-kn-°m-\p≈ Ah-Imiw {]n≥kn-∏m-fn¬
\n£n-]vX-am-Wv.
No. A2-1011/2013.
19th August 2015.
Sealed tenders are invited for Movie Camera for the
Government Arts & Science College, Kozhikode for
` 2,00,000 under UGC XII P1an (College Development
Assistance).
The Envelope should be superscribed as Re- tender
for the Supply of Movie Camera for Government Arts &
Science College, Kozhikode and addressed to the
undersigned.
Last date for the receipt of the tender is 22-9-2015 at
12 Noon and will be opened on the same day at 2 p.m.
Tenderer should submit their tenders in the prescribed
form which can be had from the undersigned on Cash
payment or Money Order of ` 420 (Rupees Four
hundred and twenty only) (inclusive of all Taxes) for
original tender and ` 210 (Rupees two hundred and ten
only) for the duplicate.
The tender forms are not
transferable.
The list of articles will be available with the
tender form.
Those who have required tender form by
Registered Post, send ` 470 (Rupees Four hundred
and seventy only) (Cost of tender form, VAT and
Registered postal charges).
An agreement in the prescribed form in Kerala
Government Stamp Paper worth ` 500 should be executed
along with the tender, accompanied with an E. M. D. of
` 2,000 in the form of Demand Draft in the name of the
undersigned from any Nationalized Bank.
Sale of tender form will be closed on 11 a.m. on
22-9-2015. Tenders without accompanied by the DD and
the agreement in the Stamp Paper will not be accepted
on any account.
The Principal reserves the right to reject any or
all tenders without any reason thereof.
Government Arts & Science
(Sd.)
College, Kozhikode-673 018.
Principal.
15th SEPT. 2015]
STORES PURCHASE
1094
Z¿Lmkv ]ckyw
\º¿ F2/1302/2015.
2015 BKÃv 21.
tImgn-t°mSv Kh¨sa‚ v B¿Svkv & kb≥kv
tImtf-Pnse 2015˛-16 kmº-ØnI h¿jsØ πm≥ ^≠v
D]-tbm-Kn®v ` 3,15,000 D]-tbm-Kn®v HmUntbm t]mUnbw
hnX-cWw sNøp∂-Xn\v ap{Z-h® Z¿Lm-kv £Wn-®p-sIm-≈p-∂p.
Z¿Lm-kp-Iƒ Abbv°p∂ Ih-dn\p apI-fn¬
2015-˛16
h¿j-tØ°v
tImgn-t°mSv
Kh¨sa‚ v
B¿Svkv & kb≥kv tImtf-Pnte°v HmUntbm t]mUnbw
hnX-cWw sNøp-∂-Xn-\p≈ -Z¿Lmkv F∂v Bte-J\w
sNtø-≠-Xpw, {]n≥kn-∏mfns‚ t]cn¬ Ab-bvt°-≠-Xp
-am-Ip-∂p. Z¿Lm-kp-Iƒ 29˛9˛2015˛\v D®bv°v 12 aWn-hsc
am{Xw kzoI-cn-°p∂Xpw, At∂Zn-hkw 2 aWn-°v
Xpd-°p-∂-Xp-am-Ip∂p.
Z¿Lmkv t^md-߃ 29˛9-˛2015˛-\v D®bv°v 12 aWn-hsc
tImtfPv Hm^o-kn¬\n∂v e`n-°p-∂-Xm-Wv. Z¿Lmkv
t^md-Øns‚ hne- ` 735˛w (\nIpXn Dƒs∏-sS)
Uyqπn-t°‰v
tIm∏n-bpsS
hne
`
368˛w
(\nIpXn Dƒs∏-sS) BWv. X]m-en¬ Bh-iy-ap-≈-h¿
Z¿Lmkv t^md-Øns‚ hnebpw, \n-Ip-Xn-bpw, cPn-kvt{SUv
X]m-en¬ e`n-°p-∂-Xn-\p-th≠ X]m¬ Nm¿÷pw
AS-°-ap≈ XpIbv°v (785 cq]) aWn-tbm¿U¿
Ab-bvt°-≠-Xm-Wv. Z¿Lmkv t^md-߃ ssIam‰w
sNøp-hm≥ ]mSp-≈-X-√. -hn-X-cWw sNtø≠ km[-\-km-a-{Kn-
I-fpsS ]´n-I Z¿Lmkv t^md-Øn-s\m∏w e`n-°p-∂-Xm-Wv.
Z¿Lmkv t^md-Øn-s\m∏w ` 500˛s‚ tIcf
k¿°m-cns‚ ap{Z-]-{X-Øn¬ DS-º-Sn-bpw, ` 1,350˛s‚
\nc-X-{Z-hyhpw (A-S-¶¬ XpI-bpsS 1 %) \¬tI-≠-Xm-Wv.
\n›nX kab ]cn-[n-°ptijw In´p-∂-Xpw, \nc-X-{Zhyw
IqsS-bn-√m-Ø-Xpw, ap{Z-]-{X-Øn¬ DS-ºSn ka¿∏n-°m-Ø-Xp-amb
Z¿Lm-kp-Iƒ
\nc-kn-°p-∂-Xm-Wv.
-\n-c-X-{Zhyw
Hgn-hm-t°-≠-h¿ _‘-s∏´ tcJ-Iƒ IqsS ka¿∏n-t°-≠-
Xm-Wv. -\n-Ip-Xn-bpƒs∏-sS-bp≈ hne-bmWv Z¿Lm-kn¬
tcJ-s∏-Sp-tØ-≠-Xv. X°-Xmb Imc-Ww- Iq-Sm-sX, Z¿Lm-kp-Iƒ
\nc-kn-°m-\p≈ Ah-Imiw {]n≥kn-∏m-fn¬ \n£n-]vX-am-Wv.
No. A2-1302/2015.
21st August 2015.
Sealed tenders are invited for Audio Podium for use
in Government Arts & Science College, Kozhikode for
` 3,15,000 under P1an 2014-15 (Modernization of Edusat
Class Room).
The Envelope should be superscribed as tender for
the Supply of Audio Podium for the use in Government
Arts & Science College, Kozhikode and addressed to the
undersigned.
Last date for the receipt of the tender is 29-9-2015 at
12 Noon and will be opened on the same day at 2 p.m.
Tender should submit their tenders in the prescribed form
which can be had from the undersigned on Cash payment
or Money Order of ` 735 (inclusive of all Taxes) for
Original tender and ` 368 for the duplicate.
The tender
forms are not transferable.
The list of articles will be
available with the tender form.
Those who have required
tender form by Registered Post, send ` 785 (Cost of
tender form, VAT and Registered postal charges).
An agreement in the prescribed form in Kerala
Government Stamp Paper worth ` 500 should be executed
along with the tender, accompanied with an E. M. D. (1%
of total amount) of ` 3,150 in the form of Demand Draft
in the name of the undersigned from any Nationalized
Bank.
Sale of tender form will be closed on 12 Noon on
29-9-2015. Tenders without accompanied by the EMD and
the agreement in the Stamp Paper will not be accepted on
any account.
The Principal reserves the right to reject any or all
tenders without any reason thereof.
Government Arts & Science
(Sd.)
College, Kozhikode-673 018.
Principal.
eLp Z¿Lmkv ]ckyw
[\º¿ 2/2015-˛16 (πm≥)]
\º¿ F1. 808/2015-/sI.Fw.-Fw.
2015 BKÃv 10.
IÆq¿ IrjvW-ta-t\m≥ Kh¨sa‚ v h\nXm tImtfPn¬ πm≥ ^≠v {]Imcw 2015-˛16 h¿j-tØ°v ImbnI hnZym-`ymk
-hIp-∏n-te°v kvt]m¿Svkv D]-I-c-W-߃ hnX-cWw sNøp-hm≥ Xm¬∏-cy-ap-≈-h-cn¬ \n∂pw ap{Z-h® Z¿Lm-kp-Iƒ
£Wn-®p-sIm-≈p-∂p.
Z¿Lmkv kwJy—` 2,00,000.
ap{Z-h® Ih-dn\papI-fn¬ “sI.- Fw. Fw. Kh¨sa‚ v h\nXm tImtfPnte°v 2015-˛16 h¿jØn¬ kvt]m¿Svkv
D]-I-c-W-߃ hnX-cWw sNøp∂Xn\v” F∂v tcJ-s∏-SpØn {]n≥kn-∏mƒ, sI.- Fw.- Fw. Kh¨sa‚ v h\nXm tImtf-Pv,
]n.- H.- ]-≈n-°p-∂v, IÆq¿-˛4 F∂ hnem-k-Øn¬ e`n-°-Ø-°-hn[w Abbv-t°-≠-XmWv.
Z¿Lmkv t^md-Øns‚ hne ` 420 (\n-Ip-Xn-b-S-°w), Uyqπn-t°-‰ns‚ hne ` 210. Z¿Lmkv
t^md-Øns‚ hne Xncn®p sImSp-°-s∏-Sp-∂-X-√. Z¿Lmkv t^md-ß-fpsS hn¬∏\ 18˛9˛2015˛\v D®bv°v 1 aWn°v
Ah-km-\n-°p-∂-Xm-Wv. ]qcn-∏n® Z¿Lm-kp-Iƒ 18˛9˛2015-˛\v 2 aWnhsc Hm^o-kn¬ kzoI-cn-°p-∂-Xm-Wv. A∂p-Xs∂
D®bv°ptijw 3 aWn°v Z¿Lm-kp-Im-cp-sS-tbm Ah-cpsS {]Xn-\n-[n-I-fpsStbm km∂n-≤y-Øn¬ Z¿Lm-kp-Iƒ Xpd-°p-∂-Xm-Wv.
Z¿Lmkv t^md-߃ ssIam‰w sNøm≥ ]mSp-≈-X-√.
344
15th SEPT. 2015]
STORES PURCHASE
1095
Z¿Lm-kp-Iƒ X]m¬ apJm-¥ncw Bh-iy-ap-≈-h¿ Bb-Xn\v ` 457 (X]m¬ sNeh-S-°w) {]n≥kn-∏m-fns‚ t]cn¬
aWn-tbm¿U¿ Ab-bvt°-≠-Xm-Wv. sN°p-Iƒ, Unam‚ v {Um^v‰v F∂nh kzoI-cn-°p-∂-X-√. Z¿Lm-kp-I-fn¬ tcJ-s∏-Sp-Ønb
XpI F√m \nIp-Xn-Ifpw Dƒs∏-sS-bm-bn-cn-°-Ww.
]qcn-∏n® Z¿Lm-kp-I-tfmsSm∏w Hcp iX-am\w (1%) \nc-°n¬ (Ip-d™ XpI ` 1,500-) \nc-X-{Z-hy-ambn
IÆq¿ sI.-Fw.-Fw. Kh¨sa‚ v h\nXm tImtf-Pv {]n≥kn-∏m-fns‚ t]cn¬ FSpØ Unam‚ v {Um^v‰v tIcf k¿°m-cns‚
` 500 hne-bp≈ ap{Z]{X-Øn¬ tcJ-s∏-Sp-Ønb F{Kn-sa‚n-t\m-sSm∏w Abbvt°-≠-Xm-Wv. GsXm-cm-fp-sSbpw Z¿Lmkv
ImcWw IqSmsX \nc-kn-°p-hm\p≈ AhImiw {]n≥kn-∏m-fn\v D≠m-bn-cn-°pw. IqSp-X¬ hnh-c-߃ Hm^o-kn¬ \n∂pw
{]hrØn Znh-k-ß-fn¬ e`n-°p-∂-Xm-Wv.
[No. 2/2015-16 (PLAN)]
No. A1-808/2015/KMM
10th August 2015.
Sealed tenders are invited for the supply of Sports Equipments/Accessories to the Department of Physical
Education of K. M. M. Govt. Women’s College, Kannur under Colleges Infrastructure Upgradation Programme
(Plan Scheme) for the year 2015-16 for an estimated cost of ` 2,00,000. The list of articles with required specification will
be supplied along with the tender form.
The tender should be superscribed as “Tender No. 2/2015-16 (Plan) dated 10-8-2015 for the Supply of Sports
Equipments/Accessories to the Department of Physical Education for the year 2015-16 at K. M. M. Govt. Women’s
College, Kannur-4” and addressed to the Principal, K.M.M. Govt. Women’s College, Kannur, P. O. Pallikunnu, Pin-670 004.
Cost of tender form :
Original—` 400 + 20 (VAT) = ` 420.
Duplicate—` 200 + 10 (VAT) = ` 210.
(Costs are non-refundable)
The date and time of closing of sale of tender form—18-9-2015, 1 p. m.
Last date and time of receipt of tender form—18-9-2015, 2 p. m.
Date and time of opening of tender—18-9-2015, 3 p. m.
Tender forms can be had directly from the college office on all working days before 2 p. m. on remittance of the
cost mentioned above.
The tender forms if required by post will be sent on payment of ` 457 (cost of tender form ` 400+ VAT
` 20 and postage charge ` 37) by money order to the Principal, K. M. M. Govt. Women’s College, Kannur, P. O.
Pallikkunnu, Pin-670 004. Cheque or Demand Draft are not acceptable. The rate quoted should be inclusive of all taxes.
The tender will be opened in the presence of such tenderers or their authorized representatives who may be present
at that time. The tender forms are not transferable. Late tenders will not be accepted under any circumstances.
Intending tenderers should deposit an amount of 1% of the total cost of the articles tendered for quoted as Earnest
Money Deposit (This is subject to a minimum of ` 1,500) by DD in favour of the Principal, K. M. M. Govt. Women’s
College, Kannur together with an agreement in Kerala Govt. Stamp Paper worth ` 500 towards the rate quoted remains firm
till 31-3-2016. The undersigned reserves the right to reject or accept any tender without assigning any reason.
More details if any can be obtained from the College Office.
List of Items
Sl.
Item with Specifications
Qty
Rate
No.
(Nos.)
(1)
(2)
(3)
(4)
1
Football synthetic all Weather proof Nivia
5
2
Football Boot Star impact good quality
20
3
Football stockings Double thick yellow
20
4
Archery Bow with full accessories Indian Round Apoorva/Manipur
4
Superior quality
15th SEPT. 2015]
STORES PURCHASE
1096
5
Archery arrows Indian round superior quality
80
6
Archery target faces 120 cm. Dia.
10
7
Archery target face 80 cm. Dia.
10
8
Shuttle Cock As2 Tournament quality
2 box
9
Shuttle Cock Navis 350 Nylone-Practice
5 box
10
Shuttle Racket Cosco-CB 150 Practice
4
11
Shuttle net Vixen Tournament quality Nylone
2
12
Volleyball-coscopasted-super-international match quality
2
13
Volleyball Net-Nivia Superior Quality
2
14
Table Tennis ball stiga cup
20
15
Table Tennis Net with Stand Vixen
1
16
Measuring Tape 50mts. fibre glass good Quality
1
17
Yoga Mat 6cm. Thickness good quality
12
18
Marking Cones-Plastic-Vexen-9”
25
19
Sports medals heavy quality 2” size Name and emblem moulded
golden colour
100
20
Inflater-microball pump-Nivia
1
21
Basketball playing shoes Panther Nivia-Superior quality
12
22
Volleyball playing shoes-Super court-Nivia superior quality
12
23
Football Team Uniform Honycon-thick-college name, emblem and
20
number printed with goal keeper jersy-with sample cloth .
24
Volleyball Uniform-sublimation printing college name, emblem and
12
number printed with sample cloth
25
Basketball Uniform-sublimation printing college name, number and
12
emblem printed with sample cloth.
26
T shirt for badminton, Table Tennis, Archery, Athletics, Volleyball and
40
Basketball Teams Lacost good quality College name and emblem printed
with sample cloth.
27
Weighing machine 200kg., Digital superior quality-Diety
1
28
Stadio meter (Height measuring stand) make with Teakwood base
1
and stand superior quality make
29
Table Tennis Table 18 mm thickness stiga-movable and foldable-
1
good quality
Krishna Menon Memorial Govt. Women’s College,
(Sd.)
Kannur.
Principal.
(1)
(2)
(3)
(4)
346
15th SEPT. 2015]
STORES PURCHASE
1097
Fire and Rescue Services Department
e-TENDER NOTICE
No. J1-9154/2015.
22nd August 2015.
e-Tenders in two cover system are invited from competent manufacturers or their authorised dealers with adequate
stock and spares and repair capabilities for the fabrication of 5 Nos. of Emergency Tenders as per the specifications of
Fire and Rescue Services Department. The tender is to be submitted as e-tenders through https://etenders.kerala.gov.in.
Since this is an e-tender, only those bidders who have enrolled in the above portal with their own Digital Signature
Certificate (DSC) can participate in the tender.
e-Tender document and other details can be obtained from the above e-portal.
The tender has two parts.
1.
Technical bid.
2.
Financial bid (BOQ).
Tender No. with PAC—KFRS-E-TENDER No. 06/2015-16— ` 550 Lakhs.
Closing date and time of e-tender—25-9-2015, 4 p. m.
Last date and time of receipt of e-tender—25-9-2015, 4 p. m.
Date and time of opening of e-Tender:
1.
Technical bid—29-9-2015, 11 a. m.
2.
Financial bid—1-10-2015, 11 a. m.
Cost of e-Tender (online submission)—` 25,000 + VAT @ 5%.
Date upto which the rates are to remain firm for acceptance—31-3-2016.
EMD—1% of PAC in online payment.
Security Deposit—5% of total contract amount inclusive of EMD to be furnished as online payment or as bank
guarantee of a scheduled bank.
Period of supply—Within 120 days of receipt of supply order.
AMC—Five years. AMC amount of 5 years will be added to the equipment price in order to decide the successful
tenders, but equipment price and Annual AMC amount for the first five years after the warranty period shall be quoted
separately in the Financial bid.
The bidder desiring to take part in the bid shall log into https://etenders.kerala.gov.in and then select tender and
make the payment. Bidders will be directed to the payment gateway page of the State Bank of Travancore. There are two
options-State Bank of Travancore SBT Net banking payment, payment through NEFT from other banks to the payment
gateway of SBT.
For obtaining Digital Signature Certificate (DSC) and necessary portal enrolment bidders can visit the website
https://etenders.kerala.gov.in.
Tenders will be opened online in the presence of such tenderers or their authorized representatives who have
logged in before the prescribed time of opening of technical & financial bids. If the date fixed for opening happens
to be a holiday/due to net failure, the tenders will be opened in the next working day at the same time.
The price of the e-tender form shall be received only through online payment SBT/SBT NEFT.
The cost should be quoted in Indian currency only.
The tender has two covers
•
Technical cover
•
Financial cover
15th SEPT. 2015]
STORES PURCHASE
1098
The first cover i.e., the technical cover shall be uploaded with the following documents:
1.
Scanned copy of complete specifications of the product along with diagrams intended to supply.
2.
Scanned copy of the agreement in the prescribed format in Kerala Stamp Paper worth ` 100.
3.
Brochure of the vehicles.
4.
Work experience certificate or other relevant details.
5.
Scanned copies of the declaration by the bidder on Kerala Stamp Paper worth ` 100 to the effect that he/his
partner/s or any of his/her directors is not involved in any Vigilance Case registered in connection with any
supply made to this Department or are blacklisted by any Government agencies in Kerala.
Soon on opening of the technical bid of e-tenders, the committee constituted to evaluate the tender will meet and
scrutinize the tender documents along with technical specification of the equipment submitted with the e-tender. The
tenderers are requested to attend the opening on the date and time specified in this tender in the Mini Conference Hall
of the Headquarters of the Kerala Fire and Rescue Services in Thiruvananthapuram and there will not be any further
communications about the opening of the technical and financial bids separately.
The financial bid belonging to those manufacturers or their authorised dealers who qualified in the technical bid of
the equipment required by Kerala Fire & Rescue Services Department alone will be considered. Tenderers are encouraged
and advised to come prepared for ppt presentation on all the technical aspects of the equipment along with samples if
possible or appropriate for the full understanding of the Head Office Technical Purchase Committee at the time of opening
or subsequently during the period of tender evaluation.
On finalization of the same, the second cover i.e., the financial bid of the concerned competent firm will be opened
for consideration.
The originals of Complied Technical Specification, Agreement in Stamp Paper worth ` 100, the declaration on
Kerala Stamp Paper worth ` I00 Brouchers/Photograph and the sample of the item intended to supply shall be produced
before the undersigned soon after the Financial Bid opening.
After opening the financial bid, financial evaluation is made only after consultation with the DPC and the decision
of the DPC shall be final and will be uploaded in the financial evaluation field of the e-tender site whether the tender is
financially admitted or not and thereafter the awarding of the contract.
The Head Office Technical Purchase Committee headed by the Divisional Officer, Kerala Fire & Rescue Services,
Thiruvananthapuram will scrutinize the tenders received evaluate them and will take decision suitably. The decision of the
Head Office Technical Purchase Committee will be final for the award of the contract.
The right of acceptance or rejection of e-tender or cancelling the tender without assigning any reason is solemnly
vested with the Head Office Managing Committee, headed by the Director (Administration), Kerala Fire and Rescue
Services.
The rules and regulations prescribed for e-tenders by the Government of Kerala will be applicable to this
e-tender also. If any tenderer wants any clarification on any aspect of the tender he/she can send email to the
[email protected] or fax to 0471-2337422.
Details with respect to the e-tender and the details of specifications of the item to be purchase
can be obtained from the e-tender website https://etenderskerala.gov.in.
Any legal disputes that may arise in relation to the e-tender formalities will be restricted to the jurisdiction of
Thiruvananthapuram District Court.
Conditions
1.
Whether Samples are
:
Pamphlets, Photograph, Drawings, CDs etc., should be forwarded along with the tender.
essential
2.
Period within which
:
Within 120 days from receipt of supply order.
goods should be delivered
3.
Rates should be quoted :
f.o.r., Thiruvananthapuram
including all taxes, and
transportation charge &
AMC
4.
Payment
:
100% payment against delivery at Thiruvananthapuram in good condition.
348
15th SEPT. 2015]
STORES PURCHASE
1099
5.
Other Special Conditions :
(1)
A Warranty of 36 months from the delivery of the item.
(2)
EMD 1% of PAC in online payment.
(3)
Security Deposit/Bank guaranty 5% of total contract amount inclusive of EMD to be furnished
as mentioned in the Notice inviting e-Tender.
(4)
Any firm whose Proprietor, Partner or Director is involved in a Vigilance Case registered in connection
with a supply made to this Department/Kerala Government earlier shall be barred from participating in this tender.
(5)
The tenderers should produce latest Solvency Certificate of ` 5 crore or more and should have an average
annual turnover of ` 30 crores for the last 3 years.
(6)
A 5 years AMC should be provided by the qualified firm after the warranty period. Amount also quoted in the
bid.
(7)
The bidder should have sufficient previous experience in fabricating Water tender/ Emergency tender. The
copies of supply order for fabricating Water tender/ Emergency tender placed by states, UT and DS US during
the calander year 2012, 2013 & 2014 should be produced in support of previous experience.
(8)
They should also produce the latest VAT clearance and latest Income Tax return copies.
(9)
On receipt of supply order the renderer should provide Insurance cover for the Kerala Government property
for minimum Rs. 5.5 Crore for fire and theft.
(10)
The fabricator’s establishment industry should be ISO certified and the latest certificate should be
furnished.
(11)
Canvassing in any manners at any time shall disqualify of the tenderer.
(12)
Renewal of temporary registration processes shall be performed by the fabricator at their own expense.
A valid Temporary Registration Certificate (T.P.) shall be produced before the department at the time of delivery.
(13)
The undersigned retains the right to increase or decrease the number of chassis for fabrication by 20%
if necessary. In other words, the number of chassis may vary from 4 to 6.
DETAILED TECHNICAL SPECIFICATION
1. General
1.
The emergency rescue tender shall be fabricated on the Chassis (TATA 1613 Turbo) Cowl Chassis, supplied by the
department at fabricator’s yard.
2.
The appliances shall be designed to carry all the equipment listed in Annexure A.
3.
The fabricated vehicle shall be strictly within the purview of the motor vehicle Act and rules in prevailing Kerala.
4.
All items used for the fabrication of the rescue tender shall confirm to the relevant BIS and where the standard
specification do not exist, best available commercial quality material shall be used.
5.
The centre of gravity of the Rescue Tender shall be kept as low as possible under all conditions of the loading.
6.
The fabrication of the unit shall be designed in such a manner that whole unit is unitized within the chassis.
7.
The actual gross weight of the vehicle with full equipment accessories, tools, crew etc. shall not exceed the
maximum permissible weight limit of the chassis as prescribed by the manufacturer. The distribution of load shall
confirm to the specification laid down by the original manufacturer.
8.
The top of the vehicle shall be adequately reinforced to permit the crew members to perform their duties while being
on the top of the vehicle.
9.
The fabricator shall furnish a guarantee for a period of 36 months for material and workmanship including PTO for
smooth functioning of the vehicle from the date of acceptance of the vehicle by the department at Viyyur, Thrissur.
10.
The fabricator shall have a work experience in fabrication of fire fighting or rescue vehicle for a minimum of
10 years and shall have supplied atleast 10 Numbers of fabricated Emergency Rescue Tenders of any class for
different agencies in India. The relevant substantiating document shall be produced.
11.
The fabricator shall supply the manual, repair kit and tools for all the equipment and accessories stowed in or
attached to the vehicle.
15th SEPT. 2015]
STORES PURCHASE
1100
12.
The fabricator shall conduct classes and demonstrations to the departmental personnel regarding the working of
vehicle and equipment and accessories attached to the vehicles as and when required by the department, at their
own cost.
13.
The fabricator shall supply a clean diagrammatic representation of the Emergency Rescue Tender that they will be
fabricating with the accessories and equipment specifications as per conditions enlisted herewith.
14.
The fabricator shall arrange for proper service of the equipments and accessories in the vehicle.
15.
On the body of the vehicles details of chassis, engine number, year of manufacture, name of manufacturer, fabricator
etc. shall be etched on a brass plate and fixed on the rear portion of the body.
16.
Fabrication shall be done in such a way that no rattling sound is produced while running/operating the vehicle, by
providing adequate sealing/packing materials.
17.
The fabricator shall arrange the repair or replacement of any equipment or accessories of the vehicle which became
faulty in the normal course of usage upto 3 years.
18.
If the fabricator is not in a position to repair the equipment and accessories provided in the vehicle, they shall
arrange for total replacement of that particular items as the case may be upto a period of 3 years from the date of
acceptance of the vehicle by the department at Viyyoor, Thrissur.
19.
Renewal of temporary registration processes shall be performed by the fabricator at their own expense. A valid
Temporary Registration Certiticatce (T.P.) shall be produced before the department at the time of delivery.
20.
3rd Party insurance shall be taken by the department.
21.
Load distribution chart and detailed drawing from the competent authority shall be submitted for obtaining approval
from the department, before commencing fabrication.
22.
The fabrication of the vehicle sha1l be completed within 90 days from the date of receipt of chassis.
23.
ABS shall be provided by the fabricator at their own cost.
24.
Stage inspection shall be conducted on completion of each stage of fabrication. After the completion of each stage
the fabricator shall report the matter to the department. Only after the inspection of one stage and a clearance is
obtained from the department, the work to next stage shall be started. Inspection shall be done at the following
stages,
Stage I.—Structural framework ready, but panelling not started.
In this stage, the inspection team will check whether the material for fabrication of the vehicle is as per the
specification the dimensions of the materials for fabrication and the square tubes, channels etc. used for the
structural frame work are measured.
Stage II.—Panelling completed, all equipment and appliances ready.
In this stage the inspection board will check the body fabrication and working of the equipment to be
stowed. The board will also check whether the equipment are as per the specification.
Stage III.—Final stage inspection.
Fabrication completed, all appliances and equipment mounted in position and safely fastened.
2.
Selection of Material
1.
The material to be used in the Construction of the appliance shall be made with a view of combining lightness with
strength and durability
2.
Timber shall not be used for the construction of any part
3.
Fittings made from ferrous material coated with nickel or chromium shall not be used
4.
All metal parts exposed to atmosphere shall be either treated with anti-corrosive materials or non corrosive materials
shall be used
5.
Wherever aluminium is used for fabrication it shall be anodized
6.
No M. S. Sheet shall be used for either body panelling or for the lockers
7.
The super structure shall be of welded construction and made from 2 mm thick MS pressed sections and square
tubes. The angles and channels used shall be having minimum 3 mm thickness. The complete structural material
shall be treated for anticorrosion by zinc plating. The plating thickness shall not be less than 20 microns.
Two coats of epoxy paint shall be applied to the completely welded.
8.
The entire vehicle shall be paneled from outside with 1.60 mm aluminium sheets.
350
15th SEPT. 2015]
STORES PURCHASE
1101
3.
Driver cum Crew Cabin:
1.
The cabin compartment shall provide enclosed accommodation to six persons including a driver and officer in
charge.
2.
The driver seat shall be adjustable - forward, backward & vertically and bucket type.
3.
Seat belt shall be provided for both driver and officer seat.
4.
At the rear end of the driver cabin, a crew seat running along the width of cab shall be fabricated in the form of a
box with three compartment, one for the batteries, one for housing spare BA cylinders with anti rolling fastener and
the other for placing mechanical tool kit. The crew seat shall be enough for 4 persons.
5.
The cabin shall have provision for sunk-in stowage of two breathing apparatus sets on either flanks of the crew
seat. The BA sets should not be hanged. They shall be fastened with suitable straps/clamps with proper cushioning
material.
6.
All seats shall be cushioned with 100 mm foam and upholstered with good quality rexin.
7.
All seats shall be rigidly fixed to the floor.
8.
The cabin floor should be covered with 3mm thick aluminium chequered plate rigidly fixed to the under frame cross
members. Trap doors for draining spilled oil or water shall be provided at proper places.
9.
A grab bar shall be fixed in the cabin between the crew and the driver portion. It shall be strengthened by a
support at the middle and the support shall fixed rigidly.
10.
The driver cum crew cabin shall be provided with full four doors, one for the driver, one for the officer and two
doors on the rear of the cabin on either side for the crew, ie., on one side there shall be two doors.
11.
All the four doors of the cabin shall be fitted with toughened glass and winding type regulators.
12.
All the four doors shall be hinged, opening outwards, hanging forward and shall have catch locks and flush type
handles provided outside. Aluminium tower bolt shall be provided inside for all the doors.
13.
Adequate grab rails shall be provided for easy boarding and alighting from the appliance.
14.
The cabin shall be panelled externally with 1.6 mm aluminium sheet.
15.
The cabin shall be internaly lined with good quality PVC coated 1.6 mm (1.2 mm) aluminium sheet.
16.
The entire cabin floor shall be covered with chequered aluminium sheet of 3 mm thickness.
17.
One roof light shall be provided in the drivers cabin.
18.
The driver shall be provided with two large size rear view mirrors and convex round mirrors for overall rear view of
the vehicle from top to bottom, left to right.
19.
Front windshield glass shall be provided as low as possible to provide the driver with clear visibility of traffic, on
the flanks and in the front. The glass shall be 5 mm thick toughened safety glass. The windshield glass shall be of
curved type to give better vision on the sides and aerodynamic efficiency with a better look.
20.
The rubber beading used for fitting glasses and window frame shall be PDM rubber.
21.
A fire bell of 250 mm diameter shall be provided on the rear left hand side of the cabin (above firemen seat) and
arrangements shall be so made to enable the fireman to ring the bell from inside the cabin.
22.
Wire mesh guards shall be provided for front wind screen glass, side door glasses (4 numbers), light bar, head
lights, fog lights and for rear lights. These wire mesh guards shall be of removable type, fitted with butter fly nuts.
4.
Body and Stowage Lockers:
1.
The stowage lockers shall be provided with Roll in and Roll out type of drawers with opening in tapered position
giving easy and immediate access to all equipments.
2.
All equipments should be stowed scientifically and systematically, in the drawers, with facility to locate and remove
each equipment, easily. Each drawer shall be labelled with the name and number of equipments in each stowage and
any vacant position in the locker shal1 indicate that the particular equipment is missing.
15th SEPT. 2015]
STORES PURCHASE
1102
3. Each equipment in the stowage shall be properly clamped and strapped, to prevent the shifting and rolling of the
equipment during vehicular movement and negotiating the curves.
4. The drawer sides shall be constructed from aluminium angles of minimum 100 mm x 4 mm thickness and the bottom
floor of the drawers shall be made from 3 mm thick aluminium sheets and then covered with good quality neoprene
rubber sheets.
5. The bottom edges of the drawers shall be covered with SS angles of minimum 2 mm thickness.
6. The drawers should have self locking system to prevent accidental opening while the vehicle is in motion.
7. The drawers shall be made according to the required size of the equipment that is to be stowed.
8. The roller shutters shall be made of hollow rectangular shaped properly anodized aluminium links which shall be
interconnected with plastic/PVC profiles scaling the roller shutter water light when closed.
9. The opening of the shutters should be done by means of a lift bar provided, with self locking system to prevent
accidental opening during vehicular movement and while negotiating a curve.
10. The roller shutters shall be rolled inwards underneath the roof giving
unobstructed access to the equipment
drawers.
11. Guide rails shall support the shutters over entire length on both sides to make them absolutely torsion free.
12. For mounting on top of the appliance, two separate ladders on either side at the rear portion of the appliance with
anti-skid round shall be provided. It shall integrate with the body and it shall be strong, firm and sturdy.
13. Quick removable type wire mesh guard made from 2.5 mm x 2.5 mm size mild steel wire mesh of l.6 mm size covered
in mild steel angle frame shall be provided to all the glasses of driver-cum-crew cabin and Tail lamp.
14. Grab-rails and non-slip steps be provided, wherever necessary. A ladder made out of stainless steel round or square
pipe of 2.5 mm diameter shall be provided at the rear of the appliance to provide easy access to the roof of the
vehicle.
15. Two numbers of 2.5 mm diameter aluminium pipe railing with sufficient number of aluminium double socket brackets
shall be provided to the rear body over the deck.
16. A heavy duty towing hook shall be provided and fitted the rear bumper by means of nuts and bolts.
17. Propeller shaft shall be protected with proper guard.
18. Stepney carrier shall be provided on the top of vehicle.
5. Electrical System :
1.
All the electrical wiring shall be of concealed nature.
2.
All lockers shall be fitted with internal individual lighting which shall be capable of being automatically switched
on and off by the opening and closing of the roller shutter. A master switch for isolating the locker lighting
circuit shall also be provided in the driver’s cabin.
3.
Two numbers of spot lights shall be fitted.
4.
Two numbers of quality fog lamps shall be fitted on the front of the vehicle.
5.
L.E.D Mini Light bar ( Flasher) shall be provided on both side & back top portion (3 Nos. each on both side
and 2 Nos. on the Rear) They shall be fitted integrally to the body.
6.
An electrically operated light bar emitting red, white and blue light with siren of 1km range and two tone hooter
with public address system shall be provided. This system shall be protected with metal guard.
7.
A master switch shall provided in the driver cabin for operating the individual lights provided in the lockers,
Cabin and rear portion of the vehicles.
8.
The switches of the hooter, siren, light bar and public address system shall be provided on dash board in a
convenient place indicated by the inspecting officers.
9.
Reversing lights shall be fixed on either side.
10.
One Pair of additional Electric Horn shall be provided.
11.
Reverse gear and indicator buzzer shall be provided.
12.
Two Nos. of Wind shield wiper shall be provided.
352
15th SEPT. 2015]
STORES PURCHASE
1103
6. Alternator unit/D.G set :
1. Honda GX630 V Twin E/Start 9.5 Kva - An in-built but petrol driven portable 230 Volt alternator of 9.5 KV A
capacity - Electric Start.
2. The unit shall be installed on the vehicle in the roll in roll out locker, preferably towards drivers side, having
a panel board with three sockets (plugs) and switches with 3 phase connection; four sockets (plugs) and switches
(MCB’s) with single phase connections of minimum 20 Amps capacity; four sockets (plugs) and switches (MCB’s)
with single phase connection of minimum 10 Amps capacity; one number of digital RPM. meter; one number of
KW meter; three number of ampere meters, separate for each phase; one number of frequency meter; one number
of 32 Amps TPN MCB. Exhaust gas of the engine shall be delivered to outside.
1. Telescopic Light Mast :
2. A compact, low profile, roof mounted lighting system fitted with 4 Nos. of metal halide lamp, each of 1000 watts,
vertically elevated and pneumatically extended up to 15 feet (4.6 m). Lighting shall be control1ed by a pistol grip
remote control luminium.
3. It shall have directional lighting system with rotation and tilt lamps to provide total coverage. The remote control
unit should allow a person to operate all the functions of the light mast and accurately aim for complete directional
positioning.
4. The unit should comprise of pistol grip handled remote control with cable, RCP rotation and tilt luminium,
mounting frame with built in tilt system etc.
7.
Ladder Gallows :
1.
The ladders gallows shall be strong to carry the weight of the specified aluminium, double extension ladder.
2.
1t shall be mounted on the roof with locks to hold the ladder in position, while the vehicle is in motion or
negotiating bends.
8.
Winch :
.
1. A good quality pulling winch which shall operate with engine power through PTO unit, shall be provided for
pulling an object up to 5 ton capacity.
2. Maximum through torque of the PTO shall not be less than the max
through torque of the engine.
3. The PTO shall be connected to the chassis gear box and the winch pump through heavy duty propeller shafts
and centre bearings preferably of Hardy Spicer make.
4. Tow eye should be provided in the front of the vehicle and it shall be operated from the drivers cab. The winch
unit should be with rope drum and 30 meter long heavy duty galvanized EIPS wire rope with replaceable self
locking clevis hook and shall be mounted on the front of the vehicle with suitable strong supports.
9. Painting & Labeling:
1. The driver cum crew’s cabin shall be painted cream.
2. The appliances shall be painted fire red in colour conforming to shade No. 536 of IS 5: 1978. The paint shall
confirm to IS 2932.
3. The whole vehicle shall be painted internally and externally with one coat of zinc chromate and under coat and
two finishing coats.
4. Painting and phosphating of the chassis shall be carried out to withstand seasonal climate effects.
5. The words “KERALA FIRE & RESCUE SERVICES” shall be painted.in letters of 10 cm height on either side of the
body and of vehicle in golden yellow colour paint. Same text in Malayalam Font” shall be painted over the other
side in same manner.
6. The name of the department “KERALA FIRE & RESCUE SERVICES” in form of sticker in fluorescent red letter in
yellow background shall be affixed on the top of the front wind screen glass.
7. Emblem of the department shall be affixed on either side of the cabin front door (Model shall be provided by the
department).
8. ‘Dial 101’ Shall be written on all the four sides of the vehicle on yellow background in black letters.
15th SEPT. 2015]
STORES PURCHASE
1104
9. Accessories and equipments- Annexure-A
(l)
Ladder with Gallows - 1 No.
An luminium extension ladder of trussed type 10.5 meters height shall be provided with the vehicle and mounted on
suitable ladder gallows. The design of the gallows shall be such that the ladder can be released without difficulty
from a reasonably accessible position. Means shall be provided for looking the ladder when stowed.
(2)
Hydraulic Rescue Tool Set - 1 No.
• The Hydraulic Rescue tools shall be portable and light-weight, and shall be suitable to use by one man. The
Hydraulic Rescue tools shall be supplied in set form, consist of main equipment like spreader, cutter, telescopic ram
and hoses and power pack and manual pump along with all the accessories.
• The Hydraulic Rescue tools and its accessories shall comply with all the requirements stipulated under EN13204 or
equivalent national/international standards.
• For the safety of the operators, victims and bystanders, the tools shall be powered by non-toxic, mineral based
hydraulic oil. Any toxic fluid shall not be used.
• All pressure hoses shall have a safety factor of not less than 4 times the maximum working pressure. All hoses shall
be provided with anti kink springs with exception of the non-kinking one hose system.
• All tools, hoses and pumps shall be equipped compact, non-drip, quick-connect couplings fast and easy
connection. All female couplers shall be equipped with automatic self-locking to prevent accidental disconnection.
The couplers would have 360 degrees free movement for easy uncoiling.
• The hydraulic rescue tools shall be designed to withstand a test pressure of two times their maximum working
pressure. Each tool has to be equipped with two internal safety valves for protection against any type of
mechanical or hydraulic overload for each cylinder and each tool shall have a separate safety valve for protection
against overpressure, in case one of the return couplers is disconnected. Moreover, all tools shall comply with the
European CE safety standards and European Norm EN 13204 or equivalent national/ international standards.
• All hydraulic rescue tools shall be equipped with automatic devices to hold any load in any position when the
control valve is in neutral position, or in cases of disconnected couplers or sudden pressure drops.
• The cutters and spreaders shall be provided with a non-slip, U-shaped carrying handle which allows
free movement of the tool from one side to the other. The carrying handle would be mounted in such a way that
the tool is fully balanced, even when the tool is picked up with one hand. The position of the carrying handle and
the control handle shall allow easy operation for right handed as well as left handed operators.
• Hydraulic rescue tools shall be provided with, double acting hydraulic cylinder with a dead mans type control and
shall be able to operate with one hand by the operator in any position.
• The tools shaft be provided either with two hoses, one for pressure line and other for return line, or one hose
having pressure line and return line within the same hose. The hoses shall be fitted in the center of the control
handle to avoid personal harm in case of leakage. The hoses shall allow full 360° rotation and shall be equipped
with anti-kink springs over the entire length, in the case of dual hose system.
• The tool body, yokes, and spreader arms shall be made out of high quality aluminum alloy for solid construction
with low weight. All aluminum alloy parts shall be ANODISED as a made out of high tensile (heat treated) tool
steel and blackened as protection against corrosion.
• The construction of the tool should be so as to allow its use under water for long periods without the risk of any
material damage to any part of the tool.
• All hydraulic tools, pumps, hoses and accessories would be fully operational for longer periods at temperatures
ranging from –5° to 50°C.
• The tools shall be supplied with proper operation/ safety instruction manuals, according to the CE, NFPA or
equivalent standards. Operation and safety instructions shall be on the tools and shall be in pictogram style so that
they can be understood by all operators easily.
354
15th SEPT. 2015]
STORES PURCHASE
1105
The Tools should be as follows :
Hydraulic Power Pack (Petrol Engine Operated) :
• The petrol driven hydraulic power pack shall be capable of powering tools independently and have connection
possibility for additional tools. For this purpose the pump shall be provided with separate connecting valves,
incorporating a manually operated pressure release valve. The valve shall have two positions, operation or neutral.
Even when under full pressure the release valve should be easy to operate and to release the pressure. This
arrangement is not applicable for one hose system. The hydraulic pump shall be driven by a 4-cycle, single cylinder,
air cooled petrol engine. The power of the engine shall be sufficient to drive the hydraulic pump to give output
sufficient to operate the two tools simultaneously without reduction in the speed.
• The petrol tank capacity shall be such that, it allows the engine to run for minimum one hour when the tools are
in continuous operation.
• The starting system of the engine shall be hand recoil type and the starting rope shall wound automatically in,
when released.
• The engine and the pump shall be mounted on suitable tubular carrying frame with integrated carrying handle.
• Suitable gauges shall be provided to find out the quantity of fuel and hydraulic oil in the power pack and same
shall be easily accessible. The provision shall also be made to refill the petrol and hydraulic oil through wide filling
opening which shall be covered with threaded cap.
• All the hot parts of the power pack shall be property shielded to avoid possibility of injury to the operator.
• Preferably there shall be provision of light near the valve block for ease in operation during the night time.
• All the controls on the power pack shall be easily accessible and properly labeled in English language.
• The weight of the power pack including hydraulic oil and fuel shall not be more than 25 kgs.
• The power pack shall be provided with 3 stage axial/radial piston pump with a minimum output of 2500 -3000 cc/min
per valve in the first stage and at least 1000 -1250 cc/min per valve in the second stage and at least 500cc in the
third stage. Each pump shall be provided with an automatic change-over valve that switches the first stage output
to no load to assure the high output in first, second stage and third stage. Each pump shall be protected with
internal safety valves for factory set at a suitable maximum pressure.
• The capacity of hydraulic oil tank shall be 2.5 to 4 litres to supply the sufficient quantity of oil to two tools
simultaneously with ample reserve capacity for the re-circulation of oil to avoid the over heating in prolonged
operation. Specifications are given below :
• The two hoses shall be in two different colours to identify easily. Non-interchangeable hydraulic coupling designed
for quick connection/disconnection shall be provided with dust caps and complete with automatic self-locking
system.
• The hoses shall have the pressure suitable for tools and the busting pressure of the hoses be 4 times the working
pressure.
• The pump shall have capacity to allow the Ram to reach full extension since Rams use more hydraulic fluid during
operation than spreader-cutters.
• Other requirement shall be as given in the table below
Engine
—
Petrol engine
Capacity oil tank (effective)
—
Approx. 4 liters
Pump
—
3 stage axial/radial Piston Pump
Weight
—
Not more than 60 kgs
No. of tools that can be
connected
—
Two
No. of tools to be
operated simultaneously
—
Two
15th SEPT. 2015]
STORES PURCHASE
1106
Cutter :
• The cutter be double acting hydraulically operated device of light weight construction made of
anti-corrosive high strength material. The details and design features of the cutter and its controls and material used
for Construction of major components such as blades, cylinders and other components shall be given in the offer.
• The cutter shall be capable of cutting various sections such as solid ground bar, hollow round bar, flat section,
square tube, rectangular tube etc. It should also be enough to cut the door pillars of new generation cars.
• In the tool with two hose system the tool shall be supplied with connection hoses of 0.5 meter long and complete
with coupling, dust cap and protection springs over total length. The female coupler should be of automatic self-
locking system type. In the case of one hose system, a male connector shall be fitted to the tool to connect the
hose.
• The cutter blade shall be parrot type, the cutting blades shall be of shock resistant non corroding alloy steel,
hardened and shall be exchangeable and regrindable. The material specification of the cutting blades and hardness
shall be indicated in the offer.
The cutter shall have following specifications:
Blade opening
— More than 180 mm
Cutting force
— Not less than 900 kn
Weight ready for use
— Not more than 22 Kg.
The material of the steel profiles shall conform to EN, NFPA or equivalent standards.
Spreader :
• The spreader shall be double acting hydraulically operated device, of light weight construction made of anti
corrosive high strength material capable of being lifted, and operated manually with ease. The details and design
features of the spreader and its controls and material used for construction of its major components such as arms,
cylinders and other components shall be given in the offer.
• The spreader would be capable of spreading and pulling with the combination of chains. In the tool with two hose
system the tool shall be supplied with connection hoses of 0.5 long and complete with coupling, dust cap and
protection springs over total length. The female coupler should be of automatic self-locking system type. In the
case of one hose system a male connector shall be fitted to the tool to connect the hose.
• The spreader shall be provided with spreading tips made of fully hardened, high tensile tool steel with proper
serrations outside and inside for a perfect grip during spreading as well as tips for cutting tips or pulling adaptors
with single hand without loosing any parts and without the need for extra tools.
Max. Spreading distance
— Greater than or equal to 650 mm
Min. Spreading force
— Not less than 40 kn
Max. Spreading force
— Not less than 300 kn
Max. Squeezing force
— Not less than 60 kn
Max. Pulling force with
pulling attachments
— Not less than 80 kn
Weight
— Not more than 22 kgs.
Ram :
It should be compact, powerful and ensure high performances. The equipment should allow for faster, more efficient
tool placement. The handle shall be deadman’s type with accurate spring return to neutral position and the max. rotation
to the right and to the left shall be less than 30°.
The Ram shall be preferably single plunger type. It shall be a hydraulically operated device of light weight, made
of anti corrosive high strength material capable of being lifted, and operated manually with ease. The details and design
features of the RAM and its controls and material used for construction of its major components such as plunger,
cylinders and other components shall be given in the offer. The RAM would be capable of spreading and pulling with
the combination of chains. In the tool with two hose system the tool shall be supplied with connection hoses of 0.5
long and complete with coupling, dust cap and protection springs over total length. The female coupler should be of
automatic self-locking system type. In the case of one hose system a male connector shall be fitted to the tool to
connect the hose.
356
15th SEPT. 2015]
STORES PURCHASE
1107
The Ram shall be provided with suitable and adequate number of accessories for lifting and pulling purpose like
chains, pulleys, extension pipes etc. The type and number of accessories that are to be provided with the Ram should be
listed and submitted along with the offer.
The Ram should comply with the following specifications:
Stroke
— 250mm to 700 mm
Length closed
— 500 to 900 mm
Length open
— 750 to 1500 mm
Weight
— Less than 15 Kg.
Max. Operating Pressure
— 720 Bar
Max. Spreading Force,
1st Section
— Approx. 200 Kn
Max. Spreading Force,
2nd Section
— Approx. 75 Kn
Manual Pump :
A suitable manual and portable pumping unit shall be provided with the tool set, which can be used to operate the
above specified tools easily and effectively to effect rescue operations when the hydraulic pumping unit is out of service.
(3)
Pneumatic Rescue Bags (Flat Type) and its Accessories—1 Set
I. General
1.1.
The manufacturing company of Pneumatic Lifting Bags should be certified ISO 9001 company.
1.2.
The pneumatic Lifting Bags should be portable and light-weight, and should be in set form, consisting of bags,
hose assembles Pressure gauges, pressure.
1.3.
The Pneumatic Lifting Bags should be in single and the lifting capacities should be of 10 ton, 20 ton, 40 ton
and 67 ton at 8-bar air pressure. The lifting capacity on higher side by 10% is allowed than the specified loads.
1.4.
The Pneumatic Lifting Bags and its accessories should comply with all the requirments stipulated under EN
13731. The copy of the EN certificate must be enclosed with the tender.
1.5.
The Pneumatic Lifting Bags should be type tested for artificial aging, 34 bar bursting pressure, dynamic fatigue
loading, impact test, impulse loading, drop test, piercing test and abrasion test and certificate to that effect
should be attached with tender.
1.6.
Each Pneumatic (air) Lifting Bags should be constructed of Kevlar reinforced nitrile rubber with 3 layers aramide
reinforcement covering the entire top and bottom surface of each lifting bag.
1.7.
Each Pneumatic Lifting Bags should be equipped with brass valve connection 1/8" NPT internal thread and
vulcanized into the reinforced corner of bag to which a male connector of quick connect coupling should be
threaded in. This male connector should be replaceable if it gets damaged.
1.8.
Each Pneumatic Lifting bags should have a center mark moulded into both sides of the lifting bags to centralize
the bags when used in multiples. It should have reflective markings on the corners for easy identification when
operating in the dark areas.
1.9.
The lifting bags should have an inter locking non skid surface moulded into each side of the bags. A separate
non skid ply which has been vulcanized separatly is not acceptable.
1.10.
The bags should be provided with a warning and information labels. The information and the warning labels
must be in English language and in pictograms for clear understanding. Also it should be marked with date of
manufacturing and serial number in such a way that they cannot be erased without damaging the surface.
Reflective stickers should be provided on all corners of the bags and a yellow centre cross should be marked
in the centre of the bag.
1.11.
The insertion height of deflated lifting bag should not be more than 25 mm.
15th SEPT. 2015]
STORES PURCHASE
1108
1.12.
The pneumatic Lifting Bags should have maximum working pressure of 8 bar and minimum bursting pressure
of 32 bar.
1.13.
The air bags should be chemical and some ozone resistant with carrying straps attached to 40 and 67 ton
bags.
1.14.
Pneumatic Lifting Bags should be able to use in a temp. Range of -30º c to +80º c.
1.15.
Each set of air bags should be supplied with follwing accessories
1.16.1
Dual Dead man controller 8 bar, housed in a plastic housing with pressure gauge, pressure relief valve, and
quick connect couplings. This controller should he suitable to inflate two bags at a time.
1.16.2.1
Pressure regulator 200/300 bar with finger tight connector and 2 mts Hose with couplings.
1.16.3
Inflation hoses should be polyester or thermo plastic of 10 meter length 2 Nos. in different colours with
suitable couplings to both side to connect Dead man controller and air bags.
2.
Technical Specifications Of Air Bags :
Discription
10 Ton
20 Ton
40 Ton
67 Ton
Capacity
Capacity
Capacity
Capacity
Working Pressure
8 bar
8 bar
8 bar
8 bar
Capacity (min)
10 ton
20 ton
40 ton
67 ton
Insertion height
Max. 25 mm
Max. 25 mm
Max. 25 mm
Max. 25 mm
Lifting height
Min. 200 mm
Min. 275 mm
Min. 400 mm
Min. 450 mm
Dimensions (Approx)
500 X550 mm
550 X650 mm
780 X780 mm
850X850 mm
Weight (Approx)
5 kgs
8 kgs
16 kgs
18 kgs
3.
Lifting Height and Capacities:
3.1
The tenderer must give the lifting capacities of each bag at various height at interval of 25 mm in numerical as
well as graphical form along with tender.
4.
Pressure Regulator:
4.1
The pressure Regulator should be capable of reducing the pressure form 300 bar to 8 bar.
4.2
The pressure regulator should be provided with threaded quick connect couplings suitable to fit to normal BA
air cylinder by hand without the use of any spanner.
4..3
The pressure regulator should be provided with two pressure gauges of suitable capacity to show the air pressure
in the cylinder and set pressure.
4.4
The pressure regulator should be provided with pressure settings knob and safety valve with 2 mts. Hose with
couplings to connect to Dual Dead man controller.
5.
Dual Deadman Controller:
5.1
The controller should be suitable to inflate two airlifting bags at a time.
5.2
All the air valves, pressure gauges, pressure relief valve, safety valve should be housed in a ergonomically
designed plastic housing.
5.3
Each control lever should be dead man type and should be capable of being raised held and lowered by means
of control lever.
5.4
The Pressure gauge should be provided for individual air outlet line with a Red line set at a 8 bar.
6.
Hoses:
6.1
All the hoses should be equipped with a quick connect/disconnecting male and female couplings, compatible
with entire air lifting bag system.
6.2
The hoses should be minimun working pressure of 16 bar and should be capable of using temp range of -40º c
to + 80ºc.
6.3
The hoses should be either of polyester or thermo plastic material.
6.4
The hoses should be resistant to Ultra Violet Light, change of colour stress or cracking.
6.5
Two shut off hoses with built in safety valve should be provided to release the pressure between 8.5 bar
and l0 bar.
358
15th SEPT. 2015]
STORES PURCHASE
1109
7.
One set of airbags will comprise of the following:—
Sl.
Description
Quantity
No.
1
Lifting Bag 10 tons capacity
1 No.
2
Lifting Bag 20 tons capacity
1 No.
3
Lifting Bag 40 tons capacity
1 No.
4
Lifting Bag 67 tons capacity
1 No.
6
Dual Controller with pressure gauges
1 No.
7
Air Hose 5 Mtrs. with couplings
2 Nos.
8
Air Hose 10 Mts. with couplings
2 Nos.
9
Single control Unit
4 Nos.
10
Shut off hose with safety valve
4 Nos.
11
Connection piece to connect two air cylinder
2 Nos.
(8)
Operation and Maintenance Manual: The manufacturer should supply operation and maintenance manual
with each set in English language.
(9)
Guarantee: The manufacturer should be give the guarantee of min. 12 calendar months from the date of
supply of goods against any manufacturing defects.
4. OXY-Acetyline Cutting Set—1 No.
Complete with 5 l cylinders or equivalent and 10 m. lengths of tubing, portable or trolley mounted
Oxygen cylinder, spare
1 No.
Gauges for oxy-acetylene cutting plan spare
1 No.
Leather gloves
2 pairs
Goggles dark glasses
4 pairs
5. Aska - Inflatoble Lighting Tower—1 No.
6. Exhaust Blower Set -Electrical—1 No.
Exhaust pipe-300 mm, 100 mm dia, flexible of 5 meter long each with a reducer attachment from 300 mm to 100 mm.
Motor 0.75 HP 2200 RPM,single phase, 230 volt. It should work on both side one for throwing Air out & other
is for sucking the Air in from out side. Flexible pipe should be foldable type with wire core made from abrasion
resistant material. The close size 1 meter max. and the extended size shall not be less than 5 meter. Preferably
yellow or any other bright colour.
7.
Exhaust blower with spiral duct petrol driven —1 No.
Engine. 4Hp- 4 Strock, 2500-3000 rpm,
Air Flow 4500-4750 CFM, Size 400 x 500 x 600 (Max).
Spiral Duct: Length-20mtr (Min), Shall be durable, long lasting with adaptor for attaching to the machine, on
either the positive pressure or negative pressure end.
15th SEPT. 2015]
STORES PURCHASE
1110
8.
Small and Special Gears
Spades (see IS 2238 : 1979)
2 Nos.
Shovel [See IS 274 (Part I and 2): 1981]
2 Nos.
Picks, with handle (see IS 273: 1973)
2 Nos.
Axes: felling (see IS 703: 1966)
2 Nos.
Crow bars, 1 m long (see IS 704: 1968)
2 Nos.
Crow bars, 1.5 m long (see IS 704:1968)
1 No.
Sledge hammer 10 kg (see IS 841: 1968)
1 No.
Hammer, 5 kg (see IS 841: 1968)
1 No.
Rake, 3 prong (see IS 5991: 1971)
1 No.
Rubber, gloves tested to 25000 volts (see IS 4770: 1968)
2 Pair
Shears, bolt cropper, large with handle, 900 mm
2 Pair
Shear, bolt cropper, small with handle 600 mm
2 Pair
Fire mans Axe with carrying pouch
2 Nos.
Cieling Hook with insulated (Fibre) Pole -3 Meter.
1 No.
9.
Breathing apparatus set - 4 Set with 1 Spare Cylinder Each
Sl. No.
Details
Description
(1)
(2)
(3)
1
General
requirements:
•
The set shall be self-contained open circuit type compressed air breathing apparatus set
fully confirming to EN-137 CLASS II standards.
•
The BA set shall contained air cylinder, back plate, face mask lung demand regulator,
pressure reducing valve, hose, electronic signaling and warning whistle unit and must be
facilitated with buddy breathing system.
•
The compressed air breathing apparatus shall be so designed that it should operate in any
harsh environment and must be capable to withstand the rough use of fire brigade. Also
the wearer could breathe comfortably, without any risk of poisonous of gas entering the
breathing circuit.
•
The maximum duration of the use of set shall not be less than 45 minutes.
•
The main valve of the air cylinder shall be arranged that it can be operated in the worn
position by the wearer.
•
The weight of set should be minimum as far as possible, in no way the Gross weight of
the BA Set with face mask and fully charged compressed air cylinder shall not exceed 12 kg .
2
Αir
•
The cylinder of the set shall be approved PESO India/CCOE approved and certificate to
Cylinder
the effect shall be submitted along with the tender.
•
The air cylinder shall have a minimum water capacity of 6/6.6 liters and free air capacity
of minimum 1800 liters when filled at a pressure of 300 bar.
•
The working pressure of the cylinder shall not be less than 300 Bar and the
•
The cylinder of the set should be made of light weight composite cylinders with
aluminum liners wrapped in carbon fiber with a glass over wrap and surface should be
resin finished.
•
The cylinder should be marked with photo luminescent strip for following the BA set
wearere.
360
15th SEPT. 2015]
STORES PURCHASE
1111
3
Cylinder
•
The cylinder shall be supplied with valve made of nickel plated brass and shall comply
valve
with EN 144 II. A test certificate from an authorized test lab should be produced.
•
The design of the valve shall be such that it shall be protected against blockage and
shall avoid transmission of particulate matter that may be contained in the compressed air.
•
The design of the valve should be such that it should be located in such a way that it
cannot be closed advertently during the use.
4
Full face
•
The face mask shall have double reflex sealing, speech diaphragm, inner mask, neck,
Mask
strap five finger head band with push-in type connection lung demand valve.
•
The side sealing of the face mask shall be gas tight and shall be possible to fit the face
mask on almost all face counters.
•
The visor fitted on the face mask shall be made from scratch proof poly carbonate with
maximum view to the wearer and shall have demisting characteristics.
•
It should have the approval of the latest EN 136 Clause 3 and should have EC mark of
conformity.
•
The face mask shall be made from silicone rubber.
5
Pressure
•
The set shall be supplied with a small, light sturdy and encapsulated, high air delivery
reducer
Pressure reducer valve which directly be fitted to the cylinder valve assembly.
•
The pressure reduce valve shall reduce the pressure from 300 Bar to 8-10 Bar.
•
The pressure reducer valve shall have a high pressure outlet and low Pressure outlet with
warning whistle.
•
The high pressure outlet shall be connected to electronic signaling and warning unit and
the low pressure outlet shall be connected to Lung Demand Valve.
•
The pressure reducer valve shall have a provision of safety pressure Relief valve.
•
The pressure reducer valve shall comply with the entire safety requirement stipulated
under EN-137. The pressure reducer should provide upto 1000 LPM flow of air.
•
High and low pressure hose shall be made from the neoprene and natural rubber and shall
instant the respective pressure.
6
Lung
•
The set shall be provided with plug-in quick removable type lung demand valve with a
demand
rubber hose having a quick connect coupling connected to the low pressure side of
valve
pressure reducing valve. The LDV should be connected from the front side of the mask.
The LDV should be a balanced piston design offering stability, quick operation & first
breath activated with a centrally located switch off button & tough wrap around silicone
cover incorporated in an elegant streamlined shape for easy handling - even when
wearing gloves.
•
Lung demand valve retainer should be provided on waist-belt to plug in the demand valve
when not being used to prevent dust & other particles entering the valve.
•
Flame Retardant To NFPA (Self Extinguishing 1000 Degree Centigrade 10 Second).
Intrinsically safe certified.
•
The warning unit should have pneumatic whistle of 90 Decibels sound Intensity.
•
The warning unit should give warning whistle audible 10 minutes before the nominal
duration of the set or the pressure in the cylinder falls to + 55 bars.
•
The cover of the lung demand valve shall be made from silicon.
7
Back Plate
•
The back plate of BA set shall be glass fiber reinforce polyamide to withstand high heat
and flames and automatically shaped to give a comfortable distribution of masses &
remain steady on the user’s back even when crouching or crawling. It should have
soft padded harness made of flame retardant fabric. Extra secure fasteners are made for
quick on and off and should be aramid blend material for extra durability.
The backplate should be approved to EN 137 class II and CE marked and designed to
accept cylinder having diameter from 110 mm to 170mm. Strong Carrying handle should be
provided.
•
Cylinder strap should be made of heat resistant material and should be capable of
accommodating cylinders of different diameters. The strap should have quick release
coupling for changing cylinder.
(1)
(2)
(3)
361
15th SEPT. 2015]
STORES PURCHASE
1112
8
Warning
•
Low Pressure Warning Whistle: BA set must be provided with low pressure warning
Whistle
whistle, which shall operate automatically, when cylinder pressure drops to a
predetermined pressure (i.e. air in the cylnder is left for 10 minutes at the rate of 40 liters/
minute) for safety margins. It should not be externally adjustable, and the consumption air
by warning whistle should not exceed 5 liters/ minute. It should be positioned at left
shoulder for easy hearing and should not produce sound less that 90 db.
9
Harness
•
The padded harness should be fire resistance, should not deteriorate or shrink in contact
with water/moisture/water miscible substances or on contact with oil grease etc., and also
provide resistance to chemicals, it neither should not built up static electricity nor should
retain static charge. It should be fully adjustable to be worn by a fireman having variation
in height and waist size. The design should be such that wearer could don the apparatus
quickly without the aid of another including the chest and hip strap, if provided should be
easily distinguishable by touch. The method of fastening should be of similar and also
the adjustment. The buckles provided should be quick release type. The light weight
ebbing harness ensures optimal load distribution balance comfort and reduced wearer
faligue.
10
Integrated
•
Water proof pressure gauge having luminous dial reading upto 400 bars should be
Pressure
positioned in such a way that it can be read by BA wearer conveniently. It should be
Gauge
mounted in stainless steel case having corrosion resistance and protected by rubber cover.
Gauge dial should be photo luminescent and shatter proof poly carbonate glass. It should
be mounted on left shoulder. The dial must be marked red to indicate low pressure in the
cylinder, in addition to warning whistle set to operate at a pressure when it is left with a
10 minutes air in the cylinder. It should be protected by safety device including restriction
valve that will limit the loss of air in event of damage of pressure gauge to 10 liters/
minute maximum.
11
Carrying
•
A strong carrying case to store complete assembled BA set along with BA cylinder should
Case
be provided. It should. be designed in such a way that all parts of the assembled set
could be placed in its proper position.
•
A black colour plastic bag to avoid deterioration due to the effect of ultra violet light and
also to prevent mask being contaminated by oil, fuel, dust etc. It will be used to cover the
face mask and then store it in the carrying case.
12
Instruction
•
An instruction book in English, for the guidance of the user including both operating and
Book
normal maintenance procedure must be supplied. The book must include an remized
and illustrated spare parts list, giving reference numbers to all parts.
13
Spares
•
Supplier shall ensure availability and supply of fast moving spares at short notice
for at least five years. The supplier shall provide a price list of such spares along with
commercial bid.
14
AMC
•
The company should provide AMC for 5 years.
15
Warranty
•
The company should provide warranty for a minimum period of one year.
16
Marking
•
The trade mark of manufactures identification shall be marked on the face mask demand
valve, pressure reducer and back place. The serial number of the set and the date of
manufacturing shall be marked on the back plate.
10.
Underwater Breathing Apparatus set—1 Set
The Self-Contained Underwater Breathing Apparatus (SCUBA) proposed is for carrying out under
diving.
The complete set is certified to EN 250.
General
The apparatus should be rugged, lightweight suitable for carrying by a single person. The set should have
its
standard and optional equipments and should comprise of following.
(a)
Compressed air cylinder pack—2 cylinders with one cylinder valve. Robust design suitable for
demanding environments.
•
Perfectly balanced under water
•
Low profile allows for safer access to confined spaces minimized resistance in current water.
•
The regulator position simplified cylinder valve handling and the carrying handle protects the regular.
362
(1)
(2)
(3)
15th SEPT. 2015]
STORES PURCHASE
1113
(b) Full Face mask with breathing/demand valve balanced positive pressure with low volume visor
The Full Face Mask consists of a balanced breathing valve with high air flow capacity and low
breathing resistance. The Breathing Valve is available with safety pressure for diving in contaminated
water.
•
The low volume visor reduce the positive buoyancy generated from air inside the mask. Low volume
“dead space” reduces re-inhalation of CO2.
•
The Full Face Mask is very easy to drain from water filling, simply press one button and hold the lower
part of the face mask our from the face.
•
The mask is equipped with retainers spectacle inserts and it is prepared for underwater communication.
The communication capabilities are enhanced by the airflow design that considerably reduces turbulence
noise.
(c) A regulator unit with reserve air valve with Pressure indicating guage.
Regulators have extremely high flow capacity. Their design ensures that the intermediate pressure leading
to the breathing valve is stable and is not affected by pressure variations in the air supply of the
depth of the dive. Both regulators have convenient air supply connections for buoyancy compensating
jacket, dry suit and Octopus breathing valve.
•
Chest mounted reserve valve and surface supply connection.
•
Approved for use in cold water.
•
The function of the reserve valve can be checked pre-dive.
•
The reserve valve is self-resetting at pressure above, 100 bar (1450 psi)
(d) Buoyancy Compensating Device
•
The Primary design of BCD Harness allows a diver to maintain natural buoyancy through out the dive.
The BCD Harness is portable and can be slipped on the cylinder pack with ease in a moments notice.
•
The BCD Harness ensures that negative buoyancy of Steel .Cylinder Pack is over come with out the
compulsory use of fixed buoyancy devices like neoprene suits etc which provide fixed positive buoyancy
and hence are of little use at deeper depth.
•
The BCD Harness system also provides the Divers and nearby divers an Emergcncy Air Source of
supply as the Divers can breathe from the BCD itself. In addition it also acts as a life jacket/f1otation
device on surface for the Divers waiting for pick up/unconscious on surface.
Dimensions:
01
Nominal capacity of set
8-10 liters.
02
Charging pressure
200- 300 bars.
03
Capacity of set after charging
At least 2400 liters.
04
Weight of set
Not more than 24 kgs.
(a) The set to have wide vision full-face mask. The 5 head straps provided should from an effective seal on to
the face.
(b) Re-breathing of carbon dioxide enriched exhaled air must be elimenated and breathing resistance must be as low
as possible whilst the equipment must have sufficient capacity
(d) As far as possible the set should be designed for use in temperatures range of minus 10 degree Celsius to 50
degree Celsius.
(e) The set should withstand sea state up to 5.
Documents:
The following documents are to be provided:
(a) General arrangement drawing giving overall and all-important dimensions and with sufficient details so that all
standard equipment can be identified.
(b) Operational Manual giving details of maintenance and repair instructions.
(c) Test report, if any along with inspection certificate.
15th SEPT. 2015]
STORES PURCHASE
1114
11. Life Buoy —5 Nos.
(1)
Manufactured from durable synthetic material in bright orange colour which requires no maintenance.
(2)
Totally moisture proof and non-inflammable.
(3)
High glow reflective material identifies victims in distress.
(4)
Internal diameter—43 cm, Outer diameter-72 cm, Width - 11 cm, Floatability -17.5 Kg, Weight—Not less
than 4 Kg.
5
Approved and Stamped by Indian Register of shipping (IRS).
12. Life jacket—5 Nos.
(1)
Made up of light visibility, nylon orange cloth filled with high Quality soft Polyethylene foam.
(2)
Jacket to be provided with plastic quick lock buckle and welcro for tightening.
(3)
Jacket to be attached with a whistle and soles approved retro reflection tape stitched at visible locations.
(4)
Size of jacket is 68 cm x 37 cm x 10 cm.
(5)
Number of floating pads—4 Numbers at front side and 2 Numbers at back side with neck support.
(6)
Approximate weight 750 gms.
(7)
The light of the Life Jacket is integrated with Lithium Battery.
(8)
Approval Indian Register (lRS) of shipping approval.
13. Chain Saw Electric—2 Nos.
Electric Powered Chain Saw Small
Power Input: 2100W
Chain Bar Length: 400 mm
Chain Pitch: 3/8"
(With 3 Spare Chains)
Chain Speed: 12.00 m/s
Cable Length : 2.5 meter
Chain Gauge l.3 mm
Weight : Not more than 5 Kg.
14. Chain Saw Petrol Operated Stihl MS381—1 No.
15. Concrete Cutter Petrol Operated Stihl MS400 —1 No.
16. Portable Drilling Machine (Rottary Hammer—1 No.
With 3 mtr. long electrical cable with plug.
Drilling Dia.- Concrete: 26 mm, Steel 13 mm.
Weight Less than 3 Kg.
Should be supplied along with different size Drill Bits, Adaptor, Chuck, Accessories. Manuals etc.
17. Multi Gas Detector—l No.
1. General
(a) This specification covers the requirement of an electronic portable 5-gas detector that simultaneously and
continuously measures the combustible gases, oxygen and toxic gases in the ambient air. When the gas
concentration exceeds the preset alarm level, it must provide both audible and visual alarms to the user. It
shall be capable of detecting the following gases.
364
15th SEPT. 2015]
STORES PURCHASE
1115
(i)
Explosive gases-0 to 100% LEL using catalytic Ex sensor with 1% resolution.
(ii)
Carbon Monoxide-0 to 1000 ppm using electrochemical sensor with 1 ppm resolution.
(iii)
Hydrogen Sulphide-0 to 100 ppm using electrochemical sensor with 0.1 ppm resolution
(iv)
Oxygen-0 to 25 Vol. % using eIectrochemical sensor with 0.1 % resolution
(v)
Sulphur dioxide-0.1 to 100 ppm with 0 .1 ppm resolution.
(b) This detector must have gas sensors that are intelligent and have interchangeable capability that allows you to
add or switch to a different gas sensor at a later time.
2. Description
(a) The gas detector must be portable and include rechargeable interchangeable Lithium-ion and alkaline battery
packs. It shall come with the following accessories;
(i) Universal battery charging set, comprising of the charging module and the single charger
(ii) Special antistatic sampling hose of up to 3 meters in length with filter for water and dust integrated in the
external pump.
(iii)Flexible goose neck probe for leak detection.
(iv)Leather carrying case for portable gas detector.
(v) Carrying case for keeping and transporting with pre-cut foam
(b) The portable gas detector shall be fully equipped with all the sensors to detect all 5 gases at the same time. It
shall come with an external pump (hose with up to 20 meters length) and it should be robust and comfortable
for the users;
(c) The portable gas detector must have the folIowing sensor combination that allows for future upgrade:
(i) One channel with one Catalytic Ex sensor
(ii) Three channels for electrochemical sensors that can detect any of the following gases;
3. Technical requirement
(a)
The portable gas detector shall be equipped with an external sampling pump, which is capable of drawing the
gas to be measured through a hose length of up to 20 m/65.6 ft in depth. Warning should be provided when
blockage by water, dust or foreign particles while sampling.
(b)
The digital display shall be in liquid crystal display and it should show simultaneously the gas being measured,
real time gas concentration, the measuring units, gas alarm status and low battery status.
(c)
The portable gas detector shall be capable of performing on board diagnostic continuously and automatically to
ensure fail safe operation. If a failure should occur with the electronics, the battery or the gas sensors, the user
must be infomed immediately with a clear fault alarm and indication on the display.
(d)
The acoustic alarm shall be that of a multi-frequency tone alarm with volume that shall exceed 90dB A at a
distance of 30 cm from the instrument. The optical alarm shall be bright and visible i.e. 180 ÷.
(e) The instrument housing shall be made durable with an integrated rubber boot for accidental dropping from a
height of 1 meter.
(f)
The portable gas detector shall be suitable for used in environmental condition with temperature ranging from
-20÷ C to 50÷ C and relative humidity ranging from 10 - 95% non-condensing.
(g)
The protection class for dust and water ingress must be IP67.
(h)
The portable instrument shall come equipped with a data logger that has a storage capacity
of recording approx. 1000 hours based on a one minute interval. The storage interval of 1/10/30 sec. or 1/2/5/10/
30 min. can be selected by the user. The data in the instrument shall be transmitted to a PC by an Infrared
interface and can be evaluated by a software program.
15th SEPT. 2015]
STORES PURCHASE
1116
(i)
The portable gas detector shall be powered by a rechargeable battery pack that is capable of providing upto
12 hours. The max. operation time of the external pump shall be upto 30 hours.
(j)
Each portable gas detector shall be provided with a single universal battery charging set.
(k)
The portable gas detector must carry international standards such as those from Europe and the United States
of America:
All certificates shall be attached
(l)
A list of equipment and materials with detail technical information and their unit prices, required for the
calibration of the portable gas detector shall be submitted.
(m)
All additional accessories required for operations for the portable gas detector must be stated and the cost each
of every accessory must be provided accordingly.
4. Instruction and Service Manual
Comprehensive and easy to read manuals shall be provided with the portable gas detector.
(a) An instruction manual which cover the description and the operational procedure for the user.
(b) A technical handbook which cover the specifications, calibration procedures and the maintenance procedures.
(c) A list of the consumable parts.
(d) Calibration should be done Free of cost within the warranty period.
(e) The Multi Gas Detector should have a minimum warranty of Five years.
18.
Retro Reflective Traficcone — 4 Nos.
19.
Folding Stretcher—1 No.
20.
First Aid Box—1 No.
21.
Safety Belt—3 Nos.
(1) It should be of full body harness in catchy colours of green and black.
(2) It should be equipped with unique features that provide full comfort and ergonomics to the wearer.
(3) It should withstand the highest of safety standards as laid out in European Norms and CE certified.
(4) Attachment elements such as 1 Dorsal D ring for fall arrest, Ventral D ring at waist level in front for
rope access and 2 lateral D rings at waist level on the sides for work positioning shall be provided.
(5) It shall be provided with adjustable shoulder, thigh-strap and waist belt.
(6) It shall have an ideal combination of fall arrest, Rescue and Rope access application.
(7) It shall conform to EN 361 : 2002, EN 358 :- 2000 & EN 813.
(8) There shall be Karabiner at front of harness which enables the wearer to easily wear or remove the
harness by detaching the shoulder strap.
(9) Warranty of Minimum 2 years shall be provided.
22.
Kernmantle Rope
100 ft long 16 mm dia BOB rope
— 2 lengths
40 ft long 12 mm dia BOB lashing lines
— 2 lengths
20 ft long 10 mm dia BOB rope
— 2 lengths
23. Wire Rope
50 ft long 5/8” dia wire rope with suitable D-Shackle attachment (2 Nos.)—1 Length
20 ft long 5/8” dia wire rope with suitable D-Shackle attachment (2 Nos.)—2 Length
24. Wire Reel 30 Meter—2 Nos.
3 Core 4 mm2 with water proof high quality Sockets shall be handled and operated easily. With the exception of the
coated steel carrying frame all other parts of the reel are made of frame. The cable is fitted with an all rubber 3-pole male
CEE plug 3 female sockets 16A 230 Volt I-phase current.
366
15th SEPT. 2015]
STORES PURCHASE
1117
25. Extension Box—l No.
2 Amperage —16 Amp. Min. Voltage—220 - 230 V. Single phase with minimum 30 m cord cable, electric fuse
attachment facility, atleast three universal sockets.
26. Halegon Flood Light System —1 No.
2000 watt works on 230 volt AC. Suitable for connection to the electrical mains or a portable generator. Dust-and
water resistant as per IP 56. Each set consists of: Two Halogen floodlights 1000 watt each, for 230 volt I-phase current,
Two fixing handles with adapter bridge, One tripod, extendable upto 1500 mm, One cable reel with 30m of cable, including
plug and socket with 2 spare Halogen lamps, 1000 watts.
27. Led Re-chargeable Head Light—5 Nos.
The head lamp shall be made from impact resistance housing, unbreakable polycarbonate lens, ‘O’ ring sealed,
water resistant. The light capacity of 1 watt, super high flux LED of 34 Lumens, min. run 7 time 10 hrs. The head strap
shall be made from elastic or rubber and suitable for fireman helmet. It shall have operate on AA alkaline battery. The
weight of device shall not be more than 250 gms. The unit should be Class 1 Div. 1 hazardous location approved.
Orange or yellow colour, CE approved Stream light, Pelican, wolf, make or equivalent.
28. Led Re-chargeable Torch—2 Nos.
Rechargeable battery of Lead Acid type having 4 AH capacity, High intensity halogen 4 watt bulb, 150 lumens,
Made from High Impact ABS Thermoplastic housing, with rubberized impact bumpers, and scratched resistant lens
cushion grip handle & hook for attaching to the belt, upto 3hrs. Continuous run time, ATEX or FM approved and approx.
Weight 1.5 kg with AC & DC Charger with mounted Rack and shoulder strap. Orange or yellow colour, Stream light,
Pelican, wolf make or equivalent.
28. Engineers Tool Kit—1 No.
Mechanical Tools: Double End spanner set 6 mm to 36 mm, Ring spanner set 6 mm to 36 mm, Box spanner set
6 mm to 36 mm with Ratchet, T- bar and Extension Rods etc.,
Allen Key Set, Insulated plier 8" Screw Driver with insulated handle, flat/Square tip of different sizes, VISE GRIP
PLIER: Size - 10" length Should have teeth on both jaws Made of forged steel, Cold Chisel, Adjustable Wrench 12” &
24" etc.
Shall be quality products and arranged in a Carry box properly.
29. Salvage Sheet—12 × 12 Feet No.
Heavy grade Salvage Sheets suitable for more rugged purposes.
Ready to use eyelets are spaced at one meter intervels in the reinforced hems and all four corner eyelets are
reinforced by a corner patch.
UV protected, rot proof, flexible and easy to handle. 100% waterproof, 100% rot proof.
Material should satisfy relevant standards like BS 3566: 1982
30. Fire Entry Suit—2 Nos.
SPECIFICATIONS
General Description:
These shall be used for entry into extreme heat and situations requiring protection from
total flame engulfment. Highly insulated Fire Entry suits worn by personnel in preparation for possible fire eruption in the
immediate work area or for stand by operations should a rescue or evasive action require passage through a fire zone.
Material: Not less than 7 layer construction includes: Aluminized outer shell, 1-inch fibreglass insulation,
aluminized vapour barrier, flame-resistant cotton lining. It shall be made of zetex/Vermiculite or equivilent.
Temperature Rating: Short duration ambient heat of 1500° F (815°C), total flame of 2000° F (1093ºC). Radiant heat
to 3000° F.
Construction:
A. Hood: Designed for use with an air mask. Built-in shell for structural support. Inner drape seals and underarm
adjustment straps. Ratchet-adjustable hard cap with speedy clip for support. Hardened aluminium window frame with two
suitable plated tempered glass lenses backed by two additional lenses for thermal protection.
B. Coat: Double storm fly front. Flame seal with drawstring at coat bottom.
15th SEPT. 2015]
STORES PURCHASE
1118
C. Pants: High waist with 2" wide adjustable suspenders and adjustment straps on leg bottoms.
D. Boots: Designed to fit over work shoes. Rear entry with overlap snap enclosure and adjustable take-up straps.
Boot sole made from 2" of layered insulation, flame retardant cotton lining, aluminium foil, and wire-reinforced, flame-
retardant neoprene fibreglass.
E. Mitts: Heavy construction; made with fabric. Aluminized outer layer.
F.
Size and Weight: Suit One size fits all. Approximate weight: Not more than 26 Kg.
The Suit shall comply NFPA 701 requirements or equivalent and meets the following requirements:
• EN 532:1992 Limited Flame Spread
• EN 367:1992 Convective Heat
• EN 366: 1993 Method B Radiant Heat
• EN 407: 2004 Molten Metal Splash
3l.
Chemical Suit—2 Nos.
Technical requirements.—The required TYPE 1 gas tight chemical protective suits shall be used during work in
incidents where there are chemical substances/gases leakage.
(1)
The Gas tight should be fully encapsulating Type 1/leveI A gas tight suit covering both the wearer and the
breathing apparatus.
(2)
It should have the latest technology in both fabric and suit design and should be compatible with any
manufacturer’s breathing apparatus.
(3)
The suit shall be gas tight and approved as per EN 943-2 Type 1a-Reusable.
(4)
For emergency team the fabric of the suit should be of HIGHVISIBLF color HIGH PERFORMANCE
CHEMICAL BARRIER material which is puncture resistant high strength, high tear resistant and 100% non woven and
should be CE marked to the latest standard EN 943- 2, Protective clothing against liquid and gaseous chemicals, including
liquid aerosols and solid particles. Performance requirement for “gas - tight” Type 1.
(5)
The suit shall be light weight and flexible multi layer high performance chemical barrier fabric.
(6)
The suit shall have wide chemically resistant and mechanically strong visor providing clear undistorted vision.
(7)
The suit should be sewn and double taped for maximum performance with adjustable internal support belt and
“Bat-Wing” sleeves for providing ease of movement within the suit allowing the wearer to withdraw his arm to attend to
his breathing apparatus and give optimal wearer comfort along with the replaceable dual glove system.
(8)
The suit should be fitted with detachable/replaceable chemically resistant safety boots with steel toecap and
midsole. The boots should be certified to EN-ISO 20345-1, EN 20345 -1, EN 13287, EN 943-2, EN 13832 and NFPA 1991 &
EN 20345-1S5 or equivalent.
(9)
The main features of the boots to include. Minimum 200 Joule Steel Toecap. Slip resistant Sole. Injection
moulded seamless construction. Non absorbent polyester lining, Kick off lug for easy removal, Energy absorbing Tunnel
System, Stainless steel midsole. Shall be oil resistant Rubber out sole for superior grip. Hygro exothermic insole for
maximum wearer comfort Antistatic.
(10) The suit should be one piece protective suit with sewn seams taped on both inside and outside.
(11)
The suit should include a back pod to accommodate the wearing of self contained breathing apparatus [SCBA].
(l2)
The suit shall have double glazed anti mist visor giving clear undistorted vision. The mechanical strength of
the visor conforms to EN 146: 1991 or equivalent. Resists chemical permeation for the substances listed in the European
Standard EN 943-2:2002 for more than 480 minutes.
(13)
The suit should have two exhale valves to the rear of the hood to ensure the pressure within the suit does not
exceed 4mbar.
(14)
The suit should have heavy duty gas tight zip fitted to right hand side of suit, closing at bottom shrouded by
double outer storm flaps with a Velero closure.
368
15th SEPT. 2015]
STORES PURCHASE
1119
(15)
The suit shall have five fingered dual gloves assembly comprising lined Neoprene outer gloves providing a
high level of mechanical strength with bonded silver shield chemical barrier laminate gloves on the inside with the locking
cuff mechanism allowing the replacement of the gloves.
(16)
The suit should have internal fitting adjustable internal support belt to enable wearers of varying sizes to
comfortably use the suit and two blank external fittings for waist belt support.
(17)
The suit shall have manufacturing, design and all-quality procedures should be pretested in excess of
European Standard requirements.
(18)
Every suit shall be accompanied with the hard box/case made of PVC or other similar material of suitable sizes,
as to secure the proper handling and storing, grease for the zipper, a users manual for storing, Maintaining and repairing
in English language.
(19)
The temperature range of the fabric should be-70 degree centigrade to 90 degree centigrade. .
(20)
The fabric should not brittle or fracture after immersion in liquid nitrogen [-196º C ] for 1 hour.
(21)
The breakthrough time in Chlorine Gas and Liquid should be above 480 min.
(22)
The suit shall be of reputed make such as MSA, AUER, RESPIRAX, DRAGGER. TRIELLBORG.
(23)
All relevant certificates shall be furnished along with the product.
32.
Rubber Dinghy with OB Engine—1 No.
Inflatable Boat :
(l)
The boat shall be inflatable with air pressure by foot pump and Electric pump (12 Volts DC/230Volt AC Supply)
along with necessary accessories.
(2)
The boat shall be suitable for 7-10 (Seven to ten) persons, or for 2000 lbs/l000 Kgs weight.
(3)
The boat shall have reinforced strips under air chamber and keep rubbing strake for extra strength, under the
main air chamber.
(4)
The design of the boat shall be such that it shall have minimum four separate air chambers. Out of which three
air chambers shall be in main hull, and fourth air chamber shall be in the inflatable keel, the hull, air tubes
(Chambers), Keels shall be made from Hyplon with 1670 DENI the fabric to carry an approval of BSMA
(British standard manufacture association) 16 or IMO (International Maritime Organization) LSA (Life Saving
Appliance) regulation or equivalent.
(5)
The boat shall be provided with plastic coated Transom to form a water proof cocoon.
(6)
The exterior size of the boat shall be min. 4200mm × l800mm
(7)
The interior size of the boat shall be min. 2925mm × 1000mm
(8)
The deflated size hull shall be approx. l150x650x350mm and floor board shall be 775 × 950 × l50mm
(9)
The boat shall have four chambers situated at Port, Starboard, Bow and Keel.
(10)
The diameter of the tube shall be minimum 19".
(11)
There shall be inflatable keel of 7" diameter for stability in sea and swift water rescue.
(12)
The seams of the boat shall be quadruple overlap.
(13)
The air valves shall be one way type of approved type and make.
(14)
There shall be 5/8" grab line along sides for safety.
(15)
The weight of boat without floor board & OBM shall not be more than 187 lbs.
(16)
The floor board shall be inter-locking type of polyethylene materials/marine plywood with fibre glass reinforced
plastic coating with carry bag.
(17)
The boat shall have round/conical pontoons for rapid planning.
(18)
There shall have built in oarloks for easy rowing. There shall be two stainless steel “D” rings for Rowing.
(19)
The boat shall have four carrying handles and front lifting handle.
(20)
There shall be strake around hull and under keel for extra protection.
15th SEPT. 2015]
STORES PURCHASE
1120
(21)
There shall be two layers of material on lower tubes for better abrasion and puncture resistance.
(22)
There shall be two self bailing drain valves.
(23)
The design of the hull shall be wide beam type for better stability.
(24)
The boat shall be supplied with carrying bag.
(25)
The boat shall be supplied with Bow storage bag and repair kit.
(26)
The boat shall have quick attachment for OBM.
(27)
There shall be two paddle provided for emergency rowing.
Accessories :—
Foot Pump—2 Nos.
Electric Pump with necessary accessories—1 No.
Floor board—1 set
Paddle of aluminium handle and moulded plastic blades—2 Nos.
Anchor with rope—l No.
Repair Kit consists: Rubber Patches—10 Nos. Adhesive — ½ Kg, Roughtening Tools—2 Nos.
(28)
The items to be new, unused and suiting to latest design and relevant specifications.
(29)
The drawing, design. manufacturing materials and the manufacturing firms to be approved by LRS/IRS
(Liyod’s Register of shipping/ Indian Registered of Shipping).
(30)
Approved drawing of general arrangement of boat must be enclosed with tender.
Out Board Engine (25HP)
(1) The boat shall be provided with outboard motor which can be quickly attached whenever required.
(2) The engine of the out board motor gasoline engine of reputed brand (Honda/Suzuki/Yamaha).
(3) The capacity of OBM should be 25 HP ,4 Stroke and will run with Gasoline (Petrol)
(4) The RPM of the engine shall be 5000-6000 or as per IRS/LRSI approval.
(5) The engine cooling system shall be water cooled type
(6) The Exhaust system shall through prop. Shaft.
(7) The lubrication system shall be manual type or Better.
(8) The engine and drive line shall be fitted in enclosed housing to protect from Sea/River/Canal water.
33. LEAKAGE ARRESTER KIT—l No.
1. Bandage Set Pneumatic Leak Seal
Hazmat Pneumatic leak sealing bandages set.
This shall be pneumatically operated bandage which will first arrest the leak using ratchet and belt
arrangement after wrapping arrangement and then by inflation of the bandage.
(a)
Two bag shall be supplied in the set for use in pipes with diameter 5-48cm.
(b)
The sizes of the bags shall be minimum 98 × 21 cm and 177 × 21 cm respectively.
(c)
Sealing area shall be minimum 19cm wide.
(d)
Belt shall be fitted directly on the bag with ratchet.
(e)
It shall be able to withstand a counter pressure upto 1.4 bar.
(t)
The set shall be supplied with inflation hoses 1.5 bar - controllers 1.5 bar and
foot-pump for inflation.
The leak sealing system shall comply with the following regulations in their standard design.
(a) Machinery directive 89/392/EEC as amended by directives 9l/368/EEC-99/44/EEC 94/68/EEC.
(b) EN 292 Part 1/2.
370
15th SEPT. 2015]
STORES PURCHASE
1121
The material of construction of the bag shall have excellent abrasion resistance good dielectric properties -
resistance to acids - resistance to solvents like aliphatic hydrocarbons - aromatic hydrocarbons - oxygenic solvents -
paint solvents. It shall also have resistance to swelling in lubricant oils, mineral oils and fuels - ozone -sunlight heat and
aging - heat aging - flames high temperatures and cold.
2. Bag Hazmat Pneumatic Leak Seal
Hazmat Pneumatic Leak Sealing Bag with guiding loops.
(a)
This shall be capable of sealing hazardous material leaks from containers with minimum diameter of 50cm.
(b)
This shall able to withstand a counter pressure.
(c)
The sealing are a shall be upto 50cm x 30cm.
(d)
Heavy duty acid protection cover shall be supplied along with.
(e)
The loops shall be able to turn upto 45 degrees.
The leak sealing bag shall be supplied as full set in a transparent case. Minimum following items shall be there
in the set.
(a)
Foot pump with safety valve (1.5 bar)—1 No.
(b)
Inflation hose 1.5 bar - 10 meter blue colour with necessary quick coupling —1 No.
(c)
Acid protection cover PVC yellow—1 No.
(d)
2 Nos. Sealing plates 60 × 30 × 3 cm.
(e)
I No Sealing plates 100 × 30 × 3 cm.
(f)
4 Nos. tension and extension belts with ratchet - 10 meter - orange and blue.
The leak sealing system shall comply with the following regulations in their standard design.
(a) Machine directive 89/392/EEC as amended by directives 91/368/ EEC-99/44/EEC - 94/68 EEC.
(b) EN 292 Part 1/2.
The material of construction of the bag shall have excellent abrasion resistance -good dielectric properties
resistance to acids - resistance to solvents like aliphatic hydrocarbons aromatic hydrocarbons - oxygenic solvents paint
solvents. It shall also have resistance to swelling in lubricant oils mineral oils and fuels - ozone -sunlight heat and
aging - heat aging-flames high temperatures and cold.
10.
Workmanship and finish:
1. A high quality workmanship and the finish is expected during the fabrication and at the time of delivery
of the unit.
2. All the sharp edges shall be grinded.
3. All the joints shall be even and accurate.
4. All the welding shall be perfect without air blows.
l1. lnstruction Book:
1. A detailed instruction book for the guidance of the user shall be prepared and
2. It shall contain the details of operation, maintenance and proper use of the vehicle, all the appliances and
equipment.
12.
Acceptance:
The fully fabricated vehicle with all equipment and accessories shall be delivered at Fire & Rescue Services
Accademy, Viyyur, Thrissur Free on road.
The delivered vehicle will be inspected by a board of officers for the general functioning of vehicle and associated
equipment and accessories. The vehicle shall be accepted by the department based on this report.
15th SEPT. 2015]
STORES PURCHASE
1122
COMPLIANCE STATEMENT
A specification compliance statement in the following Performa shall be submitted along with the offer, and the
statement should be complete in all aspect and should cover each and every details of specification.
Specification compliance statement for Emergency Rescue Tender
Sl.
Detail of Departmental
Detail of the product
Deviation from
No.
Technical Specification
offered
Departmental Technical
Specification, if any
1
Fire & Rescue Services Head quarters,
Fire Force Junction,
(Sd.)
Thiruvananthapuram.
Director (Administration).
E-TENDER NOTICE
No. Jl- 9155/2015.
22nd August 2015.
e-Tenders in two cover system are invited from competent manufacturers or their authorised dealers with
adequate stock and spares and repair capabilities for the fabrication of 24 Nos. of Mini Water Tenders as per the
specifications of Fire & Rescue Services department. The tender is to be submitted as e-tenders through
https://etenders.kerala.gov.in. Since this is an e-tender, only those bidders who have enrolled in the above portal with
their own Digital Signature Certificate (DSC) can participate in the tender.
e- Tender document and other details can be obtained from the above e-portal
The tender has two parts
1. Technical bid
2. Financial bid (BOQ)
Tender No. with PAC—KFRS-e-Tender No. 07/2015-16—` 720 Lakh.
Closing date of e-tender—25-9-2015, 4 p. m.
Last date & time of receipt of e-Tender—25-9-2015, 4 p. m.
Date & Time of opening of e- Tender:
1. Technical bid—29-9-2015, 11 a. m.
2. Financial bid—1-10-2015, 11 a. m.
Cost of e-Tender (online submission)—` 25,000 + VAT @ 5%.
Date up to which the rates are to remain firm for acceptance—31-3-2016.
E.M.D.—1% of PAC in online payment.
Security Deposit—5% of total contract amount inclusive of E.M.D. To be furnished as online payment or as
bank guarantee of a scheduled bank.
Period of Supply — Within 120 days of receipt of supply order.
The bidder desiring to take part in the bid shall log into https://etenders.kerala.gov.in. and then select tender
and make the payment. Bidders will be directed to the payment gateway page of the State Bank of Travancore. There are
two options-State bank of Travancore SBT Net banking payment, payment through NEFT from other banks to the
payment gateway of SBT.
For obtaining Digital Signature Certificate (DSC) and necessary portal enrolment bidders can visit the website
https://etenders.kerala.gov.in
Tenders will be opened online in the presence of such tenderers or their authorized representatives who have
logged in before the prescribed time of opening of technical and financial bids. If the date fixed for opening happens to
be a holiday/due to net failure the tenders will be opened in the next working day, at the same time.
372
15th SEPT. 2015]
STORES PURCHASE
1123
The price of the e-tender form shall be received only through online payment SBT/SBT NEFT.
The cost should be quoted in Indian currency only.
The tender has two covers
• Technical cover
• Financial cover
The first cover ie: the technical cover shall be uploaded with the following document
1.
Scanned copy of complete specifications of the product along with diagrams intended to supply.
2.
Scanned copy of the agreement in the prescribed format in Kerala Stamp Paper worth ` 100.
3.
Brochure of the vehicles intended to supply.
4.
Work experience certificate or other relevant details.
5.
Scanned copies of the declaration by the bidder on Kerala Stamp Paper worth ` 100 to the effect that
he/his partner/s or any of his/her directors is not involved in any Vigilance Case registered in connection
with any supply made to this Department or are blacklisted by any Government agencies in Kerala.
Soon on opening the technical bid of e-tenders, the committee constituted to evaluate the tender will meet and
scrutinize the tender documents along with technical specification of the equipment submitted with the e-tender. The
tenderers are requested to attend the opening on the date and time specified in this tender in the Mini
Conference Hall of the Headquarters of the Kerala Fire and Rescue Services in Thiruvananthapuram and there will not be
any further communications about the opening of the technical and financial bids separately.
The financial bid belonging to those manufacturers or their authorised dealers who qualified in the technical bid of
the equipment required by Kerala Fire & Rescue Services Department alone will be considered. Tenderers are
encouraged and advised to come prepared for ppt presentation on all the technical aspects of the equipment along with
samples if possible or appropriate for the full understanding of the Head Office Technical Purchase Committee at the time
of opening or subsequently during the period of tender evaluation.
On finalization of the same, The second cover ie: the financial bid of the concerned competent firm will be opened
for consideration.
The originals of Complied Technical Specification, Agreement in Stamp Paper worth ` 100, the declaration on
Kerala Stamp Paper worth ` 100 Brouchers/Photograph and the sample of the item intended to supply shall be
produced before the undersigned soon after the Financial Bid opening.
After opening the financial bid, financial evaluation is made only after consultation with the DPC and the decision
of the DPC shall be final and will be uploaded in the financial evaluation field of the e-tender site whether the tender is
financially admitted or not and thereafter the awarding of the contract.
The Head Office Technical Purchase committee headed by the Divisional Officer, Kerala Fire & Rescue Services,
Thiruvananthapuram will scrutinize the tenders received evaluate them and will taken decision suitably. The decision of
the Head Office Technical Purchase Committee will be final for the award of the contract.
The right of acceptance or rejection of e-tendcr or cancelling the tender without assigning any reason is
solemnly vested with the Head Office Managing Committee, headed by the Director (Administration), Kerala Fire and
Rescue Services.
The rules and regulations prescribed for e-tenders by the Government of Kerala will be applicable to this e-tender
also. If any tenderer wants any clarification on any aspect of the tender he/she can send email to the
[email protected] or fax to 0471-2337422.
Details with respect to the e-tender and the details of specifications of the item to be purchase can be obtained
from the e-tender website https//etenders. kerala.gov.in.
Any legal disputes that may arise in relation to the e-tender formalities will be restricted to the jurisdiction of
Thiruvananthapuram District Court.
15th SEPT. 2015]
STORES PURCHASE
1124
Conditions
1.
Whether Samples are essential:
Pamphlets, Photograph, Drawings CDS etc. should be forwarded along with the
tender.
2.
Period with in which goods
:
Within 120 days from receipt of supply order.
should be delivered
3.
Rates should be quoted
:
F.O.R., Thiruvananthapuram.
including all taxes, and
transportation charge
4.
Payment
:
100% payment against delivery at Thiruvananthapuram in good condition.
5.
Other Special conditions
:
(1) A Warranty of 36 months from the delivery of the item.
(2) EMD—1% of PAC in online payment.
(3) Security Deposit/Bank Guaranty 5 % of total contract amount inclusive of EMD to be furnished as
mentioned in the Notice inviting e-Tender.
(4) Any firm whose proprietor, Partner or Director is involved in a Vigilance Case registered in
connection with a supply made to this Department/Kerala Government earlier shall be barred from par
ticipating in this tender.
(5) The tenderers should produce latest Solvency Certificate of ` 5 crore or more and should
have an average annual turnover of ` 30 crores for the last 3 years.
(6) The bidder should have sufficient previous experience in fabricating Water tender/ Emergency
tender. The copies of supply order for fabricating Water tender/ Emergency tender placed by states,
UTs and P.S.Us during the calander year 2012, 2013 & 2014 should be produced in
support of previous experience.
(7) They should also produce the latest VAT clearance and latest Income Tax return copies.
(8) On receipt of supply order the tenderer should provide Insurance cover for the Kerala
Government property for minimum ` 7.2 Crore for fire and theft.
(9) The fabricator’s establishment industry should be ISO certified and the latest certificate should be
furnished.
(10) Canvassing in any manners at any time shall disqualify of the tenderer.
(11) Renewal of temporary registration processes shall be performed by the fabricator at their own expense.
A valid Temporary Registration Certificate (T.P) shall be produced before the
department at the time of delivery.
(12) The undersigned retains the right to increase or decrease the number of chassis for fabrication by 20%
if necessary. In other words, the number of chassis may vary from 20 to 28.
Detailed Technical Specification for Fabrication of Mini Water Tender with Fire Fighting Equipments/Accessories
1. General:
The Mini Water Tender shall be fabricated on the chasis mentioned below. The Mini Water Tender shall be
designed to efficiently carry 3000 liters of Water. A centrifugal fire pump with a discharge capacity of 2250 LPM at
7 kg/ cm2 and 250 LPM at 30 Kgs/ cm2 driven through heavy duty Power Take Off (PTO) unit.
2. Chassis:
Eicher (Pro 1110 XP G-cab, BS-3) Chasis with ABS will be supplied to the fabricators yard by the Department.
(a)
Renewal of temporary registration processes shall be performed by the fabricator at their own
expense. A valid Temporary Registration Certificate (T.P) shall be produced before the department
at the time of delivery.
(b)
3rd Party insurance shall be taken by the department.
374
15th SEPT. 2015]
STORES PURCHASE
1125
(c)
Load distribution chart and detailed drawing from the competent authority shall be submitted for
obtaining approval from the department, before commencing fabrication.
(d)
The fabrication of the vehicle shall be completed within 90 days from the date of receipt of chassis.
(e)
If the fabricator is not in a position to repair the equipment and accessories provided in the vehicle,
they shall arrange for total replacement of that particular item as the case may be up to a period of
3 year from the date of acceptance of the vehicle by the department at Viyyoor, Thrissur.
3. Pump (Multi Stage)
(a)
The pump shall be centrifugal type, multi stage having out put capacity of not less than 2250 LPM
at 7 kg/Cm2 and 250 LPM at 30 kgs/cm2 at 3 mtrs suction lift at NTP condition.
(b)
The low-pressure side will be of single stage and the high-pressure side also with single stage
having regenerative type impeller.
(c)
The pump shall be multistage centrifugal pump.
(d)
The details of the pump such as its make and model, supported with catalogs/brochures/drawings etc.
should be attached with the offer.
(e)
The overall pump shall be constructed from gunmetal. The normal (low) pressure impeller, volute,
and impeller bearing shall be made from gunmetal confirming to Gr. II of Is 318/1981 and the
regenerative type high pressure impeller shall be of Aluminum, Bronze (AB-2).
(f)
The pump shaft shall be made from stainless steel confirming to IS 6603/ 1972. The bearing housing
will be made of C. I. and all the studs and bolts coming in contact with water shall be of stainless
steel. The bearings used in the pump shall be of reputed make.
(g)
The normal and high-pressure impeller shall be mounted on a single shaft and normal (low) pressure
impeller shall be dynamically balanced.
.
(h)
The pump shall be provided with self-adjusting mechanical carbon seal assy. The mechanical seal
assembly shall with stand dry running of pump upto 2 minutes without any damages.
(i)
The pump shall be provided with an Inbuilt filter of easily removable type, which shall filter the
water before entering into the high-pressure stage impeller.
(j)
The size of high-pressure outlet shall be of 25 mm connected to high-pressure hose reel.
(k)
The pump shall be provided with one suction inlet of 100 mm dia. having round threads confirming
to IS: 902 of 1974 and two(2) numbers of 63 mm delivery outlets having screw.
(m)
Cooling System:—Indirect cooling system of open circuit type consisting of special heat
exchanger will be provided to the vehicle to enable full power output to be maintained during
pumping duty without overheating and hot water shall return to the pump suction inlet.
4. Power Take off Unit :
(a)
Heavy duty full torque Power Take Off unit of Indegenous Make to drive the pump to get
satisfactory performance should be provided.
(b)
PTO Unit shall be fitted behind the engine gear box, to drive the pump at the rear.
(c)
The lever of the PTO unit will be fitted in the driver’s cabin. A suitable cooling system (copper coil)
will be inbuilt in the PTO to cool the oil.
(d)
Maximum through torque of the PTO will not be less than the max through torque of the engine.
(e)
The PTO will be connected to the chassis gear box and the pump through heavy duty propeller
shafts and centre bearings preferably of Hardy Spicer make.
(f)
The ratio should be suitable to drive the pump at its rated output.
(g)
The make, model and the capacity of the PTO and its power range should be mentioned
in the offer.
(h)
5 Years warranty for PTO and connecting drives shall be provided by the fabricator.
15th SEPT. 2015]
STORES PURCHASE
1126
5. Water Tank:
(a) A water tank of 3000 Ltrs. capacity shall be fitted on the chassis on heavy bearers with internal
baffle plates to avoid water surging while accelerating braking or turning.
(b) Tank Fabrication—
1. The water tank should be fabricated from 5 mm MS sheet.
2. Full Breadth of the tank shall be welded to the cradle and not to the tank plate and shall be
mounted with suitable plates on the chassis immediately behind the cab so as to allow full
contents to flow to the pump.
2. Full Breadth of the tank shall be welded to the cradle and not to the tank plate and shall be
mounted with suitable plates on the chassis immediately behind the cab so as to allow full
contents to flow to the pump.
3. The welding of the tank shell shall be in such a manner that the first beading is from inside the
shell and subsequent bead from outside the shell.
4. Suitable eye shall be provided on the shell of the tank, to enable the tank to be lifted-off the
vehicle for repairs/maintenance/replacement as and when required.
5. The tank shall be mounted on rigid mountings which shall prevent distortion due to chassis
flexion and the mounting shall permit the full contents of tank to flow into the pump.
(c) Corrosion Protection:—
1.
The tank plates should be completely zinc plated before being welded and the welded joints will be
thoroughly cleaned and a coating of zinc rich primer should be immediately applied before corrosion
sets in.
2.
The tank will be coated internally with good quality epoxy paint. The whole vehicle including
the chassis shall be coated with best quality of anticorrosive treatment and be guaranteed for
5 years.
(d) Baffles:—
1.
The tank should be suitably baffled to prevent surge while the vehicle is accelerating, cornering
and braking.
2.
The design of the baffles shall provide access to all compartmens for repairs and maintenance.
3.
The baffles shall be easily removable and only SS nut-bolts, should be used.
4.
The baffle shall be arranged in a manner to facilitate the movement of a person throughout the
tank for cleaning and welding purposes
(e) Connections:—
1.
The tank shall be fitted with a filling orifice and bolted Manhole of 500mm dia on the top of the
tank for cleaning.
2.
The filling orifice on the top cover shall be of not less than 250mm dia thread and shall be fitted
with a removable filler cap.
3.
One overflow pipe of suitable diameter shall be fitted to the tank. The diameter of the overflow pipe
shall be determined as per the filling connections provided. However it shall not be less than 50mm
diameter in any case and taken down below the chasis but without reducing the ground clearance.
4.
A 50mm diameter drain line with a valve will be provided to drain the tank for maintenance.
(f) Miscellaneous:—
1.
The top of the tank and rear portion of the vehicle including foot board should have an
anti-slip coating.
2.
It shall be hydraulically tested at 0.5kg/cm2 pressure for leakage. This test may be carried out in the
presence of the inspecting officers or done by the manufacturers as per their own internal quality
program.
376
15th SEPT. 2015]
STORES PURCHASE
1127
3.
All welded seams shall be checked for leakage on the outsides.
4.
A water level indicator will be provided near the control panel. The level indicator calibrated on full,
¾, ½, ¼ and empty shall be of the graduated glass tube, clear acrylic or electronic type.
5.
In case of the graduated glass tube or the clear acrylic type, means will be provided to isolate the
same from the tank for maintenance as well as to extend the life of the tubes.
6.
A three way valve will be provided at the bottom to drain the tube and extend its life.
6. Water Monitor:—
1.
A long range water monitor will be fitted on rooftop where the pump is located and capable of
delivering not less than 1800 LPM @ 7kg/cm2.
2.
The monitor would be capable of traversing 360° in horizontal plane and would be capable of
elevation up to 45° and depression of up to 15°.
3.
The Monitor and nozzle to be made of SS and light alloy components and would be capable of
throwing water to a distance of not less than 35 Mtrs. in still air.
4.
A monitor shall be of AKRON /ROSENBAUER/TET/ELKHART/SCORPE make.
5.
The monitor have a five year warranty support in written from the manufacturer.
6.
The model, catalogs and relevant certificates shall be submitted along with the bid.
7. High Pressure Hose Reel with Gun
1.
One high-pressure hose reel shall be provided and fixed at suitable location preferably in lockers.
This hose reels shall be connected to H.P. outlet of pump with reputed make ball valve
of suitable size.
2.
The design and size of hose reel shall be such that, it shall accommodate 30 mtrs. H.P. hose having
25mm bore.
3.
The HP hose reel shall be provided with High Pressure fog/Jet trigger type gun preferably
AWG/ROSENBAUER/FIRECO.
8. Body Work and Stowage :
1.
Drivers’ Cabin:—
The driver’s cabin shall be original cabin supplied by the chassis manufacturer.
2.
Crew Cabin:—The original. cabin of chassis manufacturer shall be extended to accommodate the
four rnembers.
3.
It shall be comfortable for 4 men and shall have seat belts for each person and be with foam cushions and
shall be upholstered with Rexene.
4.
The cabin structure shall be modified as per guidelines laid down by the chassis manufacturer.
5.
The complete cabin shall be duly treated for corrosion resistance by two pack epoxy treatment.
6.
Adequate lighting will be provided in the crew cab. Good quality insulation will be done in the cabin to prevent
ingress of heat during the summer months to the maximum extent possible.
7.
The glasses of the windows shall be of the tinted type so that heat is reflected as much as possible.
8.
Grab rails and non-slip steps will be provided wherever necessary.
9.
Structure and Paneling:—The outer paneling of the cabin shall be in line with the chassis manufacturers
recommendations.
10.
The paneling of the rear superstructure shall be done from 3 mm aluminum sheets and the interna1 paneling will
be done from 2 mm aluminum sheets.
11.
The complete top of the rear superstructure shall be covered with 2 mm aluminum sheets treated for
anti slippage or with chequered sheets.
12.
The doors will be fitted with winding/sliding safety glasses. Sheets of the outer panels will be glued to the
frame work. Riveting/bolting/screws of any kind shall not be permitted.
15th SEPT. 2015]
STORES PURCHASE
1128
13.
Interiors of the cabin:—The entire floor of the crew cabin shall be provided with a good quality anti skid type
vinyl matting.
14.
A First aid box shall be provided in the cabin.
15.
Seating:—The driver’s and officer’s seat will be provided by the chassis OEM.
16.
All seats would have foam cushions.
18.
Other Works:—
(a) The doors of the cabin will be fitted with safety glasses.
(b) Wire nets shall be fitted at appropriate places.
(c) Guards shall be provided for propeller shafts.
19.
The driver will be provided with large size rear view mirrors on both sides of the cab and convex round mirrors
for overall view of the vehicle from top to bottom and left to right.
20.
Lockers:—
1. Suitable lockers shall be provided for storage of equiprnents and accessories listed in these specifications.
2. Sufficient numbers of lockers shall be provided to accommodate all the equipment/accessories in an easily
accessible manner.
21.
Roller Shutters:
(1) For the easy operation of the Fire tender Ziegler, or Rosenbauer make Roller-shutters covering the
equipment lockers shall be installed on both sides of the appliance.
(2) These shutters shall be rolled inwards underneath the roof giving unobstructed access to the equipment
lockers and the equipment/accessories fitted in the vehicle.
(3) Roller shutters shall be made of hollow rectangular shaped aluminum links which will be inter connected
with the help of plastic/rubber profiles, sealing the roller shutter watertight when closed.
(4) Roller shutters shall be durable, maintenance free, weather and corrosion resistant and capable of opening
in every position of the vehicle even in rough terrain and on slopes.
(5) The sections of the shutter shall be powder-coated/anodized to a smooth finish and aesthetic look.
(6) Guide rails should support the shutters over the entire length
(7) The shutters shall have a sturdy locking mechanism which will prevent accidental opening during
movement of the vehicle.
(8) A master switch for isolating locker lighting circuit (which will be fully LED based) shall be fitted in the
driver’s cabin. The complete shutter assembly, the side, bottom and main profiles as well as the locking
system shall be from the shutter manufacturer only.
22.
Stowage of Equipments:
A.
For all water fittings like branch pipes etc. quick release type couplings or snap clamps of spring steel
(as per the manufacturers standards) shall be provided which shall enable the operator to locate the desired
equipment instantly and save valuable time.
B.
The fittings shall ensure that none of the items damage internal paneling.
C.
Suitable straps, brackets etc. will be provided for all other items.
9.
Electrlcal System:
1.
All important electrical circuits shall have separate fuses suitably indicated and shall be grouped into a common
fuse box located in an accessible position in Driver’s cab and fitted with means for carrying, spare fuses.
2.
The wiring should be single pole and should not be exposed to the atmosphere.
3.
Conduits should be used wherever necessary.
4.
All equipmcnts lockers should have individual lights and these should be operated by means of a master
switch on the dash board in the driver’s cabin.
5.
The switch of the light/siren should be provided on the dash board.
378
15th SEPT. 2015]
STORES PURCHASE
1129
10. Other Electricals:
1.
Two fog lamps and two spot lights in front shall be installed on an extra pipe.
2.
Four Blinker type traffic indicators (OEM supplied) shall be provided.
3.
Reversing lights on either side should be fixed suitably at the rear of the appliance with wire mesh in such a
manner to prevent accidental damage by the fireman while mounting the tank top.
4.
A spot light of 50W power shall be provided at the rear portion of appliance near the pump.
5.
Two-tone hooter cum P.A. System having 25 watt capacity with speaker, LED Light bar with red, blue and white
flasher lights of minimum 75-100 watts, 1200 mm shall be mounted on the cabin roof and amplifier in the cabin.
6.
Lights with flasher shall be fitted on top of Driver cabin.
7.
Electronic siren-l00w
8.
Suitable brackets should be provided on top of the tank for the spare wheel.
9.
One pair of additional electric horn shall be provided.
10.
Reverse gear and indicator buzzers shall be provided.
11.
Two Nos. of wind shield wipers shall be provided.
12.
L.E.D Mini Light bar (Flasher) shall be provided on both side & back top portion. (2 Nos. each on Both side
and 2 Nos. on the Rear) They shall be fitted integrally to the body.
11. Rear of the Appliance:
(a) Strong grab rails with support at the rear should be provided.
(b) The entire rear portion including foot board should be covered with 1.60 mm aluminum chequered plate.
(c) A cat ladder shall be provided and fitted at the rear of water tank and fabricated out of 1” dia. M. S.
tubular pipe and 2 mm.
(d) An adequately illuminated control panel shall be provided near the pump and easily accessible to operator
for operating different controls. The control panel of required size shall be made from 3.15 mm. aluminum
sheet.
(e) The control panel of the rear should have following arrangement.
1. Throttle control for engine.
2. Compound guage.
3. Pressure guage high pressure.
4. Pressure guage normal pressure.
5. Primer control valve lever.
6. Cooling water valve.
7. Tube type level indicator showing level of water in the tank.
8. Suitable panel lights and all other required items.
(f)
The main pump and control panel shall be covered with Rolling Shutter at the rear of the appliances.
12. Ladder And Ladder Gallows:
1.
Ladder Gallows: Ladder gallows shall be provided for carrying 10.5 m aluminum double extension trussed
type ladder.
2.
The ladder shall be trussed/boxed design.
3.
Means will be provided for locking the ladder when it is stowed.
13. Workmanship and Material:
1.
Workmanship executed shall be of the highest order.
2.
All rivets and bolt holes shall have a coat of approved paint on both surfaces before riveting or bolting or
welding. All steel screws, bolts, nuts, rivets etc. shall be zinc coated or shall have rust proof coats by a
recognized process.
3.
The roof joints shall be subjected to rigid water test at vendor’s workshop in presence of purchaser’s
representatives.
4.
All directions and instructions on all points related to the fabrication shall be executed whenever given by
the purchaser’s representative for quality and workmanship.
15th SEPT. 2015]
STORES PURCHASE
1130
14. Painting:
1.
The driver cum crew’s cabin shall be painted cream.
2.
The appliances and body shall be painted fire red in colour conforming to shade No. 536 of IS 5: 1978.
The paint shall confirm to IS 2932.
3.
The whole vehicle shall be painted internally and externally with one coat of zinc chromate and under coat
and two finishing coats.
4.
Painting and phosphating of the chassis shall be carried out to withstand seasonal climate effects.
5.
The words “KERALA FIRE & RESCUE SERVICES” shall be painted in letters of 10 cm height on either
side of the body and of vehicle in golden yellow colour paint. Same text in “Malayalam Font” shall be
painted over the other side in same manner.
6.
The name of the department “KERALA FIRE & RESCUE SERVICES” in form of sticker in fluorescent
red letter in yellow background shall be affixed on the top of the front wind screen glass.
7.
Emblem of the department shall be affixed on either side of the cabin front Door (Model shall be provided
by the department).
8. ‘Dial 101’ shall be written on all the four sides of the vehicle on yellow background in black letters.
15. Accessories:
The following accessories shall be supplied along with each vehicle.
Sl. No.
Particulars of Accessories
Qty.
(1)
(2)
(3)
1
Heavy duty plastic Dutron or equivalent coupled with round threaded
4 Nos.
gunmental couplings suction hoses 100 mm of in 2.5 m. Each hose to be
of a length to be kept just above the water tank in special brackets.
2
Suction Metal Strainer
1 No.
4
Suction Wrenches, universal type
1 pair
5
Delivery Hose
1. It shall be non-perculating and synthetic type.
2. Minimum length shall be 15m (2 and 1" size).
3. Shall be provided with instantaneous male and female couplings
10 Nos.
of size 2 and ½" (brass)
4. Size of the hose should be 2 and ½".
5. Delivery Hose should comply with IS-636-2004.
6
Standard Brach pipe with 19m Nozzle
4 Nos.
7
Foam Making Brach Fb 2 with Pick up tube
1 No.
8
Portable fire extinguisher, DCP Type, 5 kgs, capacity BIS marked
1 No.
9
Portable fire extinguisher, CO2 type, 3.2 kgs. capacity BIS marked
2 Nos.
10
Poly Propylene rope 25mm dia, 50m with ends spliced and one end with a
1 No.
running noose.
11
Poly Propylene rope 20mm dia, 30m with ends spliced and one end with a
2 Nos.
running noose
12
Shears/Bolt cutter (28" and 36" each) The machine shall be brand new and
2 Nos.
of reputed make/Everest/Jhalany
13
Screw jack 20 ton. standard make
1 No.
14
Sledge hammers of 2.5 kgs and 5 kgs each
2 Nos.
15
Crowbar 20 mm of 1 meter
1 No.
16
Crowbar 25 mm of 1.2 meters
1 No.
17
Axe, large
1 No.
380
15th SEPT. 2015]
STORES PURCHASE
1131
18
Spade
1 No.
19
Pick axe
1 No.
20
Showel
21
Door breaker
1 No.
22
Fire hook
2 Nos.
23
Tool kit
1 No.
24
Grease gun
1 No.
25
Multi Purpose Nozzle:
1.
Selectable multi-flow settings: 95-125-150-200-250GPM@
100PSI360-475-565-755-950LPM@7kg/cm2
2.
Shut off ball valve for nozzle operation.
3.
Jet-Spray mode by twist rotation of bumper.
4.
Spray upto 120°.
5.
Abrasion and corrosion resistant.
6.
Flush without shutting off.
7.
Anti-slip finger lock rubber moulded pistol grip.
8.
Excellent performance when used with suitable educator for AFFF foam
applications.
9.
Available with 64mm(2.1/2")BS (M) Inst., OR 64mm(2.1/2")/38mm(1.1/2")
BSP/NH/NST(F) Threaded Swivel/Storz/JIS OR required inlet.
10.
Weight: 3 Kgs (6.2lbs) Performance at 7 Kg/cm2 (100PSI)
Flow Settings
GPM
95
125
150
200
250
LPM
360
475
565
755
950
2 Nos.
Jet Throw Range
Feet
65
82
92
130
155
Meters
20
25
28
40
47
Inspection and Acceptance Tests:
1. The following stage inspection and acceptance test shall be given to the complete satisfaction of the owner.
2. All the testing parameters should be carried out at the manufacturer’s premises and the details (photographic
evidence) of the testing infrastructure shall be provided.
3. The Bidder shall offer proof of having these facilities at his workshop failing which the tender is liable for
rejection.
4. Vendor shall ensure that design of tender will not affect chassis parameters such as speed, turning circle,
acceleration etc.
5. All inspection and testing records for tank, pump, PTO, piping, valves, monitor etc.
6. First Stage:—
6.1
Structural work.
7. Second Stage:—
7.1
Paneling work.
7.2
Tank testing, Mounting of water tank, pump, PTO.
7.3
All the piping shall be subjected to hydraulic test pressure of 15 Kg/cm2 for a period of min. 10
minutes.
7.4
The pump casing shall be subjected to a hydraulic test pressure of a minimum 21 Kg/cm2.
7.5
In case of the high pressure section, it shall be tested at a minimum of 45 Kg/cm2.
7.6
Tank shall be hydro at a minimum pressure of 0.3 bar for a period of one hour before mounting on
the vehicle.
(1)
(2)
(3)
15th SEPT. 2015]
STORES PURCHASE
1132
8. Final Stage:—
8.1
Stability:
8.1.1 Stability of appliance will be such that when fully equipped & laden, if the surface on which the
appliance stands is titled to either side at an angle of 27° from horizontal it will not overturn.
8.2
Gradient:
8.2.1 The vehicle will be tested on a gradient test ramp at an angle of 1:4
8.3
Endurance Test:
8.3.1
The pump will be tested for a continuous period of four hours non stop and the water will not be
replenished during this test and the engine will not show signs of over heating.
8.3.2
The first Three hours the pump shall deliver rated out put of 2250 LPM at 7 kg/cm2 and next one
hour will be 250 LPM at 30 kg/cm2.
8.3.3
This test will be offered at the pump manufacturer’s workshop prior to shipment.
8.3.4
The testing charges for the same shall be borne by the vendor.
8.4
Priming/Deep Lifting Test: 20.8.4.1 The priming shall be tested as per the latest standards and the
system shall be subjected to a test at a suction of 7 Mtrs 20.8.4.2. The priming should be achieved in less than
23-24 seconds. 20.8.5 Articulation Test: 20.8.5.1. The vehicles shall be tested for articulation and shall not show any signs
of stress during this test. The clearance in the wheel wells shall be checked for tolerances. 20.8.6 Shower Test: 20.8.6.1.1.
After completion of the fabrication, the vehicle shall be subjected to shower test as per the norms laid down under BIS.
SIGNATURE & STAMP OF BIDDER Page 35 of 54 20.8.6.1.2. The appliance shall not show any signs of leakages during
this test. 20.8.7 Road Test: 20.8.7.1 After completion of all the above mentioned tests, a road test shall be carried out
where the vehicle shall be tested as per the parameters laid down by the BIS. 20.8.7.2. The braking, acceleration and top
speed tests shall be checked and recorded by the inspecting officers.
9. Workmanship and finish:
1.
A high quality workmanship and the finish is expected during the fabrication and at the time of delivery of the
unit.
2.
All the sharp edges shall be grinded.
3.
All the joints shall be even and accurate.
4.
All the welding shall be perfect without air blows.
10. Instruction Book:
1.
A detailed instruction book for the guidance of the user shall be prepared
2.
It shall contain the details of operation, maintenance and proper use of the vehicle, all the appliances and
equipment.
11. Acceptance:
The fully fabricated vehicle with all equipment and accessories shall be delivered at Fire and Rescue Services
Accademy, Viyyur, Thrissur Free on road. The delivered vehicle will be inspected by a board of officers for the general
functioning of vehicle and associated equipment and accessories. The vehicle shall be accepted by the department based
on this report.
COMPLIANCE STATEMENT:
A specification compliance statement in the following Performa shall be submitted along with the offer, and the
Statement should be complete in all aspect and should cover each and every details of specification.
Specification Compliance Statement For Mini Water Tender
Deviation from Departmental
Sl.
Detail of Departmental
Detail of the product
Technical Specification,
No.
Technical Specification
offered
if any
1
Fire and Rescue Services Hqrs.,
(Sd.)
Fire Force Junction, Thiruvananthapuram.
Director (Administration).
382
15th SEPT. 2015]
STORES PURCHASE
1133
Health Services Department
Z¿Lmkv ]ckyw
\º¿ Fkv/2709/2014 (1).
2015 BKÃv 20.
hnjbw:—BtcmKy hIp∏—Kh. am\knI BtcmKy
tI{μw, tImgnt°mSv—πm≥ ^≠v 2015˛16—
Bip]{Xnbnte°mhiyamb CeIv{Sn°¬,
CeIvt{SmWnIv D]IcW߃ hmßp∂Xv
kw_‘n®v.
tImgn-t°mSv am\knImtcmKy tI{μØnte°mhiyamb
CeIv{Sn°¬ CeIvt{SmWnIv D]IcW߃ hmßp∂Xn\v
Xmsg ]dbp∂ \n_‘\Iƒ°v hnt[bambn AXpambn
_‘s∏´ hy‡nIfn¬ \n∂pw ÿm]\ßfn¬ \n∂pw
ap{Zsh® Z¿LmkpIƒ £Wn-®p-sIm-≈p-∂p.
Z¿Lmkv \º¿—Fkv/2709/2014 (1)
AS-¶¬ XpI—` 3,00,000
\nc-X-{Zhyw—tcJs∏SpØp∂ XpIbpsS 1%
Z¿Lmkv t^mdØns‚ hne:
HdnPn\¬—` 600 + hm‰v 4% + sk v 1%
Uyqπnt°‰v—` 300 + hm‰v 4% + sk v 1%
Z¿Lmkv hn¬∏\ \SØp∂ XobXnbpw ka-bhpw—
7˛10˛2015, 3 aWn.
Z¿Lmkv t^mdw kzoIcn°p∂ Ahkm\ Xob-Xnbpw
ka-bhpw—8-˛10˛2015, 3 aWn.
Z¿Lmkv Xpd°p∂ Xob-Xnbpw ka-bhpw—9˛10˛2015,
12 aWn.
Z¿Lmkv Ab-®psImSpt°-≠ DtZymKÿs‚
ta¬ hnemkw—kq{]-≠v, Kh¨sa‚ v am\knI
BtcmKytI{μw, tImgn-t°m-Sv.
k¿°m¿ Z¿Lmkv/tee \S]SnIƒ°v _m[Iamb
F√m \nbamhenIfpw Cu Z¿Lmkv/tee \S]SnIƒ°pw
_m[Iambncn°pw.
CXpambn _‘s∏´ IqSpX¬ hnhc߃ Hm^okv
{]h¿Øn kabØv Hm^okn¬ \n∂pw e`n°p∂XmWv.
No. S/2709/2014 (1).
20th August 2015.
Sealed competitive tenders are invited for the
purchase of Electrical/Electronics items mentioned in the
enclosed list to the institution by utilising Plan Fund-
2015-16 from the approved persons/firms for Govt.
Mental Health Centre, Kozhikode.
Estimated Cost—` 3,00,000
Cost of tender form (Original)—` 600 + VAT @ 4% +
Cess 1%
Duplicate—` 300 + VAT @ 4% + Cess 1%
Date and time for issue of tender form—
7-10-2015, 3 p.m.
Date
and
time
for
receipt
of
tender—
8-10-2015, 3 p. m.
Date and time for opening of tender—
9-10-2015, 12 Noon.
•
The tender should be addressed to "The
Superintendent, Govt. Mental Health Centre
Kozhikode" in a sealed cover. Late tenders will not
be accepted.
•
EMD 1% (One percent) of rate quoted in the
tender should be remitted along with the execution
of agreement.
•
The Rate of one quantity of item should be quoted
separately in the tender inclusive of all taxes, cess,
duties etc.,
•
In case any difference or dispute arisen in
connection with the contract, all legal proceedings
relating to the matter shall be instituted in the
court within whose jurisdiction of the purchasing
officer voluntarily resides.
•
The undersigned reserves the right to reject or
cancel the tender on without assigning any reason
whatever and his decision will be final.
•
Details regarding the tender if any can be obtained
from this office on all working days during office
hours.
•
Specification regarding the items tenderd may be
obtained from the office/RMO/Electrician/Store
Superintendent of this Hospital on all working
days on working hours.
•
An agreement has to be executed by you in the
prescribed proforma on Kerala Stamp Paper worth
` 100 (Rupees One hundred only) with all the
guarantee/warrantee/onsite service details with
contact number.
•
Invoice in triplicate should be sumitted for payment
and the payment will be released only after the
satisfactory report from the concerned with the
sanction of the undersigned.
•
If any technical problems affect the supplied items,
you should provide your on site service through
telephone call/message/any other electronic media
within due time.
•
Any laxity or any time laps will be treated as
negligence on your part and the time gap will be
treated as an extension of the guarantee/warrantee
period.
•
Violation of the agreement or any loss or damage
will be seriously viewed and has to be
compensated or else may lead to further strict
actions.
•
The items quoted in the tender should be confirm
to IS standards by reputed manufacturer.
•
Special conditions, if any, will be intimated later.
15th SEPT. 2015]
STORES PURCHASE
1134
No. S/2709/2014 (1)
List of Electrical/Electronic Items
Sl.
Name of Item
Quantity required
No.
in Number
(1)
(2)
(3)
1
3 KVA UPS
1
2
Refrigerator with Stabilizer
Capacity-180 Litre
2
3
LED bulb/Lamp-9W
75
4
LED bulb/Lamp-7W
76
5
Tube 5 28 W Fixture
75
6
28 W Choke for TS Tube
20
7
40W Tube Fixture
50
8
Street light fixture-70W HPSU
10
9
Street light fixture-2*40W Tube
10
10
6A Ordinary switch
25
11
6A Modular Switch
25
12
6A Ordinary Socket 5 pin
10
13
6A Modular Socket 5 pin
20
14
1.5 SQ MM PVC Cable meters
100
15
2.5 SQ MM PVC Cable meters
100
16
Insulation tap RYB
25
17
Drill bit set concrete 5 mm-12mm
1
18
Drill bit set metal 5 mm-12mm
1
19
15A one socket
10
20
Enclosure for 5 in one
10
21
Pendent Holder
100
22
Plastic wire in meters
100
23
MCB Din Rail Monting-6A-ISI marked
10
24
MCB Din Rail Monting-20A-ISI marked
5
25
DP isolator MCB Type 32A-ISI marked
5
26
Side holder 40W Tube
100
27
Side holder 28W TS Tube
100
28
Water Tap (Plastic) ½ inch
100
29
Solvent Cement-100 ml
50
Govt. Mental Health Centre,
(Sd.)
Kozhikode.
Superintendent.
Medical Education Department
Z¿Lmkv ]ckyw
(1)
\º¿ kn7-˛17157/2015/-Fw.-kn.-‰n.
2015 BKÃv 4.
Xncph\¥]pcw saUn°¬ tImtfPv Bip]{Xnbnte°v
B-hiyamb Xmsg ]d-bp∂ D]IcWw hnX-cWw
sNøp-∂-Xn\v ap{Z-h® Z¿-Lm-kp-Iƒ £Wn®psIm≈p-∂p.
Z¿LmkpIƒ
Z¿Lmkv
\ºtcmSpIqSn
\n›nX
XobXn°v ap≥]v {]n≥kn∏mƒ, saUn°¬ tImtfPv,
Xncph\¥]pcw˛695 011 F∂ hnemkØn¬ FØn®ncn
t°≠XmWv.
Z¿Lmkv \ºcpw D]IcWØns‚ t]cpw Afhpw—
14/2015—amen\y \n¿am¿÷\ πmÃnIv _mKv a™\ndw
(hepXv) (50 en)—3000 In.{Kmw, Nph∏v \ndw (hepXv)—
(50 en)—3000 In. {Kmw (_tbm saUn°¬ Fwªhpw
ÿm]\Øns‚ t]tcmSpw IqSn).
Z¿Lmkv t^mdØns‚ hne:
A ¬—` 1,500.
icn∏I¿∏v—` 750.
Z¿Lmkv t^mdw hn¬°p∂ Ahkm\ XobXnbpw
kabhpw—15˛9˛2015, 3 aWn.
Z¿Lmkv t^mdw kzoI-cn-°p∂ Ahkm\ XobXnbpw
kabhpw—16˛9˛2015, 2.30 aWn.
Z¿Lmkv Xpd-°p∂ XobXnbpw kabhpw—
16-˛9˛2015, 3 aWn.
Z¿Lmkv t^md߃ X]men¬ th≠h¿ Abbv°p
∂Xn\pth≠ XpI (` 50) A[nIambn Abbvt°≠XmWv.
Z¿Lm-kv t^mdØns‚ hne Hm^okn¬ t\cnt´m
aWntbm¿U¿ Btbm kzoIcn°p∂XmWv. A√msXbp≈
F√m At]£Ifpw \nckn°p∂XmWv. t^mdtØmsSm∏w
ap{Z∏{Xßtfm at‰sX¶nepw tUmIypsa‚pItfm Abbv°m≥
Bhiys∏´psIm≠p≈Xpw
ta¬hnemkw
hy‡
a√mØXpamb aWntbm¿UdpIƒ \nckn°p∂XmWv.
aWntbm¿UdpIƒhgn t^md߃ Bhiys∏´psIm≠p≈
At]£Iƒ Cu Hm^okn¬ 2˛9˛2015˛\v apºv
In´nbncn°Ww. Xmakn®pIn´p∂ aWntbm¿UdpIƒ
\nckn°p∂XmWv. Z¿Lmkv t^mdw ssIamdm≥
]mSn√mØXpw Hcn°¬ AS® XpI Xncn®p In´p∂Xpa√.
Xmakn®v In´p∂ Z¿LmkpIƒ bmsXmcp ImcWhimepw
kzoIcn°p∂X√. IqSpX¬ hnhc߃ {]hrØn Znhk
ßfn¬ Cu Hm^okn¬\n∂pw e`n°p∂XmWv.
No. C7/17157/2015/MCT.
1st August 2015.
Sealed limited tenders are invited for the supply
of the following items required for the Medical College
Hospital, Medical College, Thiruvananthapuram. Tender
should be superscribed tender number and addressed to
the Principal, Medical College, Thiruvananthapuram,
Pin-695 011. Details can be had from this office on
working hours till 3.30 p. m.
384
15th SEPT. 2015]
STORES PURCHASE
1135
Tender No. and Name of item with Quantity—
14/2015—Waste Segregation Plastic Disposable Bag
printed with bio medical emblem (1) Yellow colour
(Big) 50 L—3000 kg., (2) Red colour (Big) 50 L -3000 kg.
Cost of tender form (inclusive Sales Tax):
Original—` 1,500.
Duplicate—` 750.
Last date and time of sale of tender form—15-9-2015,
3 p. m.
Last date and time of receipt of tender form—
16-9-2015, 2.30 p. m.
Opening date and time of tender—16-9-2015, 3 p. m.
Tender form will be sent through post if required
provided due amount with sufficient postage charge
( ` 50) is sent by way of Money Order in favour
of The Principal, Medical College, Thiruvananthapuram,
Kerala State, Pin-695 011. Money Order should reach this
office on or before 2-9-2015. No other forms of remittance
will be accepted.
TENDER SCHEDULE
1.
The period for which the rates to be in firm
One year.
2.
The rates should be inclusive of all taxes,
otherwise tender will be rejected without any
notice and for free delivery at the department
concerned.
3.
Advance payments conditions will not be
considered.
4.
Tender forms are neither transferable nor the cost
of it will be refundable under any circumstances.
5.
Tenders are to be sent with details and illustrated
pamphlet (wherever necessary) neatly typed.
Manuscripts should be avoided as far as possible.
6.
Tenders should be accompanied with a formal
agreement executed in ` 100 Kerala non-judicial-
Stamp Paper together with required sum of Earnest
Money Deposits.
7.
Earnest Money Deposits (One Percentage) of the
total cost of the articles quoted for, can be remitted
by way of crossed Demand Drafts drawn in favour
of the Principal, Government Medical College,
Thiruvananthapuram.
8.
Firms will be exempted from furnishing Earnest
Money Deposit if they had produced the duly
attested copies of relevant certificate along with
their tenders.
9.
Tenders unsealed, unsigned or submitted without
superscription as specified are liable to be rejected.
10.
Tenders submitted with insufficient Earnest Money
Deposit will not be entertained.
11.
Belated tenders will not be considered under any
circumstances.
12.
For Medicines, Surgicals and Materials, samples
should be submitted along with the tender. Tenders
without samples will not be considered for
selection.
13.
Tenders should bear the signature and full postal
address of the tenderers and witnesses wherever
necessary.
14.
The undersigned reserves the right to reject any
tender wholly or partially without any prior
information to the tenderers.
15.
Specifications of the items are given in the list.
16.
Negotiation will be made only with the firm
offering lowest price whose specifications confirms
to the requirements in the tender notice.
17.
Tender will be opened in the presence of each of
the tenderers or his authorized representatives who
may present at the time.
18.
More details can be had from this office on
working hours.
(2)
\º¿ kn7-˛17158/2015/-Fw.-kn.-‰n.
2015 BKÃv 4.
Xncph\¥]pcw saUn°¬ tImtfPv Bip]{Xnbnte°v
B-hiyamb Xmsg ]d-bp∂ km[\߃ hnX-cWw
sNøp-∂-Xn\v a’ckz`mhap≈ ap{Z-h® Z¿-Lm-kp-Iƒ
£Wn®psIm≈p-∂p.
Z¿Lmkv \ºcpw C\Øns‚ t]cpw Afhpw—
15/2015—amen\y
\n¿am¿÷\
πmÃnIv
_mKv
(F) Idp∏v \ndw (sNdpXv)–(25 en)—2500 In. {Kmw
(_n) ]® \ndw (sNdpXv)–(25 en)–3500 In. {Kmw (_tbm
saUn°¬ Nn”tØmSpw ÿm]\Øns‚ t]tcmSpw
IqSnbX).
Z¿Lmkv t^mdØns‚ hne:
A ¬—` 1,500
icn∏I¿∏v—` 750
Z¿Lmkv t^mdw hn¬°p∂ Ahkm\ XobXnbpw
kabhpw—15˛9˛2015, 3 aWn.
Z¿Lmkv t^mdw kzoI-cn-°p∂ Ahkm\ XobXnbpw
kabhpw—16˛9˛2015, 2.30 aWn.
Z¿Lmkv Xpd-°p∂ XobXnbpw kabhpw—
16-˛9˛2015, 3 aWn.
385
15th SEPT. 2015]
STORES PURCHASE
1136
Z¿Lmkv t^md߃ X]men¬ th≠h¿ Abbv°p
∂Xn\pth≠ XpI (` 50) A[nIambn Abbvt°≠XmWv.
Z¿Lm-kv t^mdØns‚ hne Hm^okn¬ t\cnt´m
aWntbm¿U¿ Btbm kzoIcn°p∂XmWv. A√msXbp≈
F√m At]£Ifpw \nckn°p∂XmWv. t^mdtØmsSm∏w
ap{Z∏{Xßtfm at‰sX¶nepw tUmIypsa‚pItfm Abbv°m≥
Bhiys∏´psIm≠p≈Xpw ta¬hnemkw hy‡a√mØ
Xpamb
aWntbm¿UdpIƒ
\nckn°p∂XmWv.
aWntbm¿UdpIƒhgn t^md߃ Bhiys∏´psIm≠p≈
At]£Iƒ Cu Hm^okn¬ 2˛9˛2015˛\v ap≥]v
In´nbncn°Ww. Xmakn®pIn´p∂ aWntbm¿UdpIƒ
\nckn°p∂XmWv. Z¿Lmkv t^mdw ssIamdm≥
]mSn√mØXpw Hcn°¬ AS® XpI Xncn®p In´p∂Xpa√.
Xmakn®v In´p∂ Z¿LmkpIƒ bmsXmcp ImcWhimepw
kzoIcn°p∂X√. IqSpX¬ hnhc߃ {]hrØn
Znhkßfn¬ Cu Hm^okn¬ \n∂pw e`n°p∂XmWv.
No. C7/17158/2015/MCT.
3rd August 2015.
Sealed competitive tenders in the form prescribed
are invited for Medical College Hospital, Medical College,
Thiruvananthapuram.
Tender should be superscribed tender number and
addressed to the Principal, Medical College,
Thiruvananthapuram, Pin-695 011. Details can be had from
this office on working hours till 3.30 p. m.
Tender No. and Name of items with Quantity—
15/2015—Waste Segregation Plastic Bags (a) Black colour
(Small) (25 L)—2500 kg. (b) Green colour (Small)
(25 L)—3500 kg. (Printed with Bio medical emblem and
name of institution)
Cost of tender form (inclusive Sales Tax):
Original—` 1,500.
Duplicate—` 750.
Last date and time of sale of tender form—15-9-2015,
3 p. m.
Last date and time of receipt of tender form—
16-9-2015, 2.30 p. m.
Opening date and time of tender—16-9-2015, 3 p. m.
Tender form will be sent through post if required
provided due amount with sufficient postage charge
( ` 50) is sent by way of Money Order in favour
of The Principal, Medical College, Thiruvananthapuram,
Kerala State, Pin-695 011. Money Order should reach this
office on or before 2-9-2015 at 3 p.m.
TENDER SCHEDULE
1.
The period for which the rates to be in firm—
One year.
2.
The rates should be inclusive of all taxes,
otherwise tender will be rejected without any
notice and free delivery at the department
concerned.
3.
Advance payments conditions will not be
considered.
4.
Tender forms are neither transferable nor the cost
of it will be refundable under any circumstances.
5.
Tenders are to be sent with details and illustrated
pamphlet (wherever necessery) neatly typed.
Manuscripts should be avoided as far as possible.
6.
Tenders should be accompanied with a formal
agreement executed in ` 100 Kerala non-judicial-
Stamp Paper together with required sum of Earnest
Money Deposits.
7.
Earnest Money Deposits (One Percentage) of the
total cost of the articles quoted for, can be remitted
by way of crossed Demand Drafts drawn in favour
of the Principal, Government Medical College,
Thiruvananthapuram.
8.
Firms will be exempted from furnishing Earnest
Money Deposit if they had produced the duly
attested copies of relevant certificate along with
their tenders.
9.
Tenders unsealed, unsigned or submitted without
superscription as specified are liable to be rejected.
10.
Tenders submitted with insufficient Earnest Money
Deposit will not be entertained.
11.
Belated tenders will not be considered under any
circumstances.
12.
For Medicines, Surgicals and Materials, Samples
should be submitted along with the tender. Tenders
without samples will not be considered for
selection.
13.
Tenders should bear the signature and full postal
address of the tenderers and witness wherever
necessary.
14.
The undersigned reserves the right to reject any
tender wholly or partially without any prior
information to the tenders.
15.
Specifications of the items are given in the list.
16.
Negotiation will be made only with the firm
offering lowest price whose specification confirm
to the requirements in the tender notification.
17.
Tender will be opened in the presence of each of
the tenderers or his authorized representative who
may present at the time.
18.
More details can be had from this office on
working hours.
386
15th SEPT. 2015]
STORES PURCHASE
1137
(3)
\º¿ kn2˛12467/2015/Pn.Fw.kn.‰n.
2015 BKÃv 13.
Xncph\¥]pcw k¿°m¿ saUn-°¬ tImtf-Pv Bip-]{Xn,
Fkv. F. ‰n. Bip-]{Xn F∂o ÿm]-\-ß-fn¬ 2014-˛2015
h¿j-Øn¬ AUvan‰v sNø-s∏-Sp∂ tcmKn-Iƒ°v {_Uv
hnX-cWw sNøm≥ Xm¬]-cy-ap≈ ÿm]-\-ß-fn¬ \n∂pw
ap{Z-h® Z¿-Lm-kp-Iƒ £Wn®psIm-≈p∂p {_Uv
apXn¿∂-h¿°pw Ip´n-Iƒ°pw {]tXyIw hnX-cWw
sNø-Ø°hn[-Øn¬ AXmXp Bip]{Xn kq{]-≠p-am-cpsS
\n¿t±-i-a-\p-k-cn®v \n›nX Af-hp-I-fp≈ ]mbv°-‰p-I-fn-em°n
thWw hnX-cWw sNtø-≠-Xv.
Z¿Lmkv \º¿—21/2015.
km[-\-ß-fpsS t]cv—{_Uv (ssh‰v km≥hn®v
s{_Uv)—68800 In. {Kmw (800 {Kmw ]mbv°-‰p-I-fn¬)
Z¿Lmkv t^mdØns‚ hne:
A ¬—` 6,200.
icn∏I¿∏v—` 3,100.
Z¿Lmkv t^mdw hn¬°p∂ Ahkm\ XobXnbpw
kabhpw—28˛9˛2015, 3 aWn.
Z¿Lmkv t^mdw kzoI-cn-°p∂ Ahkm\ XobXnbpw
kabhpw—29˛9˛2015, 2.30 aWn.
Z¿Lmkv Xpd-°p∂ XobXnbpw kabhpw—29˛9˛2015,
3 aWn.
Z¿Lmkv t^mdw Xncp-h-\-¥-]pcw k¿°m¿ saUn-°¬
tImtfPv {]n≥kn-∏m-fns‚ B^o-kn¬ \n∂pw {]h¿Øn
Znh-k-ß-fn¬ sshIp-t∂cw 3 aWn-hsc e`y-am-Wv.
Z¿Lm-kp-Iƒ \nivNnX t^md-Øn¬ am{Xta ka¿∏n-°p-hm≥
]mSp-≈p. ]qcn-∏n® Z¿Lm-kp-Iƒ sSw]-ddn-tkmƒh≥kn,
\nc-X-{Zhyw F∂n-h-tbm-Sp-IqSn ka¿∏n-t°-≠-Xm-Wv. Ih-dn\v
]pdØv Z¿Lmkv \ºcpw km[-\-Øns‚ t]cpw Z¿Lmkv
Xpd-°p∂ Xob-Xnbpw hy‡-ambn tcJ-s∏-Sp-Øn-bn-cn-°-Ww.
Z¿Lmkv hyh-ÿ-I-fpsS 22-˛mw hIp∏v A\p-k-cn®v
A[n-Im-c-s∏-Sp-Ønb DtZym-K-ÿ≥ \¬Inb ssek≥kv
IqSn ka¿∏n-t°-≠-Xm-Wv. ssek≥kv IqSmsX
ka¿∏n-°p∂ Z¿Lm-kp-Iƒ ]cn-K-Wn-°p-∂-X-√. Icm¿
e`n-°p-∂-bmƒ \n›nX Af-hp-I-fn-ep≈ ]mbv°-‰p-I-fn-em°n
AXmXp ÿm]-\-ß-fn¬ \¬Ip-hm≥ _m[y-ÿ-\m-Wv.
t^md-߃ X]m-en¬ th≠-h¿ Ab-bv°p-∂-Xn-\p-th≠ XpI
(`100) A[nIambn Abbvt°≠XmWv. Z¿Lm-kv
t^mdØns‚ hne Hm^okn¬ t\cnt´m aWntbm¿U¿
Btbm kzoIcn°p∂XmWv. A√msXbp≈ F√m
At]£Ifpw \nckn°p∂XmWv. t^mdtØmsSm∏w
ap{Z∏{Xßtfm at‰sX¶nepw tUmIypsa‚pItfm Abbv°m≥
Bhiys∏´psIm≠p≈Xpw ta¬hnemkw hy‡a√mØXpamb
aWntbm¿UdpIƒ \nckn°p∂XmWv. aWntbm¿UdpIƒ
hgn t^md߃ Bhiys∏´psIm≠p≈ At]£Iƒ Cu
Hm^okn¬ 14˛9˛2015˛\v ap≥]v In´nbncn°Ww.
Xmakn®pIn´p∂ aWntbm¿UdpIƒ \nckn°p∂XmWv.
Z¿Lmkv t^mdw ssIamdm≥ ]mSn√mØXpw Hcn°¬ AS®
XpI Xncn®p In´p∂Xpa√. Xmakn®v In´p∂ Z¿LmkpIƒ
bmsXmcp ImcWhimepw kzoIcn°p∂X√. IqSpX¬
hnhc߃ {]hrØn Znhkßfn¬ Cu Hm^okn¬ \n∂pw
e`yamWv.
No. C2/12467/2015/GMCT.
13th August 2015.
Sealed competitive tenders in the form prescribed
are invited for the supply of the following items for the
MCH & SATH, Govt. Medical College, Thiruvananthapuram.
Tenders should be superscribed as tender number
and addressed to the Principal, Medical College,
Thiruvananthapuram, Pin-695 011. Details can be had
from this office on working hours till 3.30 p. m.
Tender No. —21/2015.
Details of items— Bread (White Sandwich Bread)—
68800 kg. (800 gm/pkt.)
Cost of tender form (VAT inclusive):
Original—` 6,200.
Duplicate— ` 3,100.
Last date and time for sale of tender form—
28-9-2015, 3 p. m.
Last date and time of receipt of tender form—
29-9-2015, 2.30 p. m.
Opening date and time of tender—29-9-2015, 3 p. m.
Tender forms can be had from the office of the
Principal, Medical College, Thiruvananthapuram-11 upto
3 p. m. on working days. Tender forms will be sent
through post if required provided due amount with
sufficient postage charge ( ` 50 each) is sent by way of
Money Order in favour of The Principal, Government
Medical College, Thiruvananthapuram, Kerala State,
Pin-695 011. Money Order should reach this office on or
before 14-9-2015. No other form of remittance will be
accepted.
Requirement of Breads for MC & SATH
MCH —40000 kg.
SATH —28800 kg.
Total Qty. Required —68800 kg.
Rate `—45.70/kg.
Total Cost — ` 31,44,160.
TENDER SCHEDULE
1.
The period for which the rates to be in firm—
One year.
2.
The rates should be inclusive of sales tax and for
free delivery at the department concerned,
otherwise the tender will be rejected.
3.
Advance payments conditions will not be
considered.
15th SEPT. 2015]
STORES PURCHASE
1138
4.
Tender forms are neither transferable nor the cost
of it will be refundable under any circumstances.
5.
Tenders are to be sent with details and illustrated
pamphlet (wherever necessery) neatly typed.
Manuscripts should be avoided as far as possible.
6.
Tenders should be accompanied with a formal
agreement executed in ` 100 Kerala non-judicial-
Stamp Paper together with required sum of Earnest
Money Deposits.
7.
Earnest Money Deposits (One Percentage) of the
total cost of the articles quoted for, can be remitted
by way of crossed Demand Drafts drawn in favour
of the Principal, Government Medical College,
Thiruvananthapuram.
8.
Firms will be exempted from furnishing Earnest
Money Deposit if they had produced the duly
attested copies of relevant certificate along with
their tenders.
9.
Tenders unsealed, unsigned or submitted without
superscription as specified are liable to be rejected.
10.
Tenders submitted with insufficient Earnest Money
Deposit will not be entertained.
11.
Belated tenders will not be considered under any
circumstances.
12.
For Medicines, Surgicals and Materials, Samples
should be submitted along with the tender. Tenders
without samples will not be considered for
selection.
13.
Tenders should bear the signature and full postal
address of the tenderers wherever necessary.
14.
The undersigned reserves the right to reject any
tender wholly or partially without any prior
information to the tenders.
15.
Specifications of the items are given in the list.
16.
Negotiation will be made only with the firm
offering lowest price whose specification confirms
to the requirement in the tender notification.
17.
Tender will be opened in the presence of such of
the tenderers or his authorized representatives who
may present at the time. They should have valid
authorization letters.
18.
More details can be had from this office on
working hours.
19.
Amount quoted should be in Indian Rupees.
(4)
\º¿ kn3˛7430(2)/2015/k.-sa.-tIm.
2015 BKÃv 20.
Xncph\¥]pcw saUn-°¬ tImtf-Pv Bip-]-{Xn-
bnse k¿Pdn Un∏m¿´vsa‚n-te°v Bh-iy-amb Un. hn. ‰n.
]ºv (2 FÆw) hnXcWw sNøp∂Xn\v \n›nX
t^md-Øn¬ ap{Z-h® Z¿-Lm-kp-Iƒ £Wn®psIm-≈p-∂p.
Z¿LmkpIƒ Z¿Lmkv \ºtcmSpIqSn \n›nX XobXn°v
ap≥]v {]n≥kn∏mƒ, Kh¨sa‚ v saUn°¬ tImtfPv,
Xncph\¥]pcw˛695 011 F∂ hnemkØn¬ FØn®ncn
t°≠XmWv.
Z¿Lmkv \º¿—24/2015.
Z¿Lmkv t^mdØns‚ hne: (hn¬∏\ \nIpXn
Dƒs∏-sS)
A ¬—` 950.
icn∏I¿∏v—` 415.
Z¿Lmkv t^mdw hn¬°p∂ Ahkm\ XobXnbpw
kabhpw—28˛9˛2015, 3 aWn.
Z¿Lmkv t^mdw kzoI-cn-°p∂ Ahkm\ XobXnbpw
kabhpw—29˛9˛2015, 2.30 aWn.
Z¿Lmkv Xpd-°p∂ XobXnbpw kabhpw—29˛9˛2015,
3 aWn.
t^md߃ X]men¬ th≠h¿ Abvb°p∂
Xn\pth≠ XpI (` 50) A[nIambn Abbvt°≠XmWv.
Z¿Lm-kv t^mdØns‚ hne Hm^okn¬ t\cnt´m
aWntbm¿U¿ Btbm kzoIcn°p∂XmWv. A√msXbp≈
F√m At]£Ifpw \nckn°p∂XmWv. t^mdtØmsSm∏w
ap{Z∏{Xßtfm at‰sX¶nepw tUmIypsa‚pItfm Abbv°m≥
Bhiys∏´psIm≠p≈Xpw ta¬hnemkw hy‡a√mØXpamb
aWntbm¿UdpIƒ \nckn°p∂XmWv. aWntbm¿UdpIƒ hgn
t^md߃ Bhiys∏´psIm≠p≈ At]£Iƒ Cu
Hm^okn¬ 10˛9˛2015˛\v 3 aWn°p ap≥]v In´nbncn°Ww.
Xmakn®pIn´p∂ aWntbm¿UdpIƒ \nckn°p∂XmWv.
Z¿Lmkv t^mdw ssIamdm≥ ]mSn√mØXpw Hcn°¬ AS®
XpI Xncn®p In´p∂Xpa√. Xmakn®v In´p∂ Z¿LmkpIƒ
bmsXmcp ImcWhimepw kzoIcn°p∂X√. IqSpX¬
hnhc߃ {]hrØn Znhkßfn¬ Cu Hm^okn¬\n∂pw
e`n°p∂XmWv.
No. C3/7430 (2)/2015/MCT.
20th August 2015.
Sealed
competitive tenders are invited for the
purchase of DVT Pump (2 Nos.) required for the Surgery
Department, Medical College, Thiruvananthapuram.
Tenders should be superscribed tender number and
addressed to the Principal, Government Medical College,
Thiruvananthapuram, Pin-695 011. Details can be had from
this office on working hours till 3.30 p. m.
Tender No.—24/2015
Cost of tender form (inclusive Sale Tax).
Original—` 950.
Duplicate— ` 475.
Last date and time for sale of tender form—
28-9-2015, 3 p. m.
388
15th SEPT. 2015]
STORES PURCHASE
1139
Last date and time for receipt of tender form—
29-9-2015, 2.30 p. m.
Last date and time for opening of tender —
29-9-2015, 3 p. m.
Tender form will be sent through post if required
provided due amount with sufficiant postage charges
(` 50) is sent by way of Money Order in favour of
The
Principal,
Government
Medical
College,
Thiruvananthapuram, Kerala State, Pin-695 011. Money
Order should reach this office on or before 10-9-2015,
3 p. m. No other forms of remittance will be accepted.
SPECIFICATIONS
Intermittent Pneumatic Compression DVT Pump
The compression system should have:
1.
Sequential gradient and circumferential
compression arround the ankle, calf and then the
thigh.
2.
Gradient compression in decreasing range of
pressure from ankle to thigh.
3.
Venous retum of individual patients should be
sensed by compression system itself using the
tachnique of air plethismography (VRD System)
4.
Provides animated alarm resolution were animated
icons communicate the cause of alarm and remedies
for alarms.
5.
Controller should provide reduced noise by having
vibration dampeners and soft over moulding.
6.
Controller should have graphic user inter face of
3.2 inch colour LCD screen which provides large
icons for greater visibility.
7.
Controller should have USB port.
8.
Battery back up with heavy duty batter which
supplies power for 8 hours for uninterrupted
compression.
9.
System should accommodate signle length
operation or both if needed.
10.
Leg sleeves should have bladder geometry evenly
distribute pressure across these bladders with
minimal pressure points.
11.
25 Nos. disposabale leg sleeves (medium and small)
to be supplied with each installation.
12.
FDA/ISO/CE mark certified qualified product.
(5)
\º¿ kn3˛7430(4)/2015/Fw. kn. ‰n.
2015 BKÃv 18.
Xncph\¥]pcw saUn-°¬ tImtfPnse k¿Pdn
Un∏m¿´p-sa‚n-te°v B-h-iy-amb kndn©v ]ºv—3 FÆw
hnX-cWw sNøm≥ Xm¬]-cy-ap-≈-h-cn¬ \n∂v ap{Z-h®
Z¿-Lm-kp-Iƒ £Wn®psIm≈p-∂p.
Z¿Lmkv \º¿—25/2015.
Z¿Lmkv t^mdØns‚ hne:
A ¬—` 630.
icn∏I¿∏v—` 315.
Z¿Lmkv t^mdw hn¬°p∂ Ahkm\ XobXnbpw
kabhpw—28-˛9˛2015, 3 aWn.
Z¿Lmkv t^mdw kzoI-cn-°p∂ Ahkm\ XobXnbpw
kabhpw—29˛9˛2015, 2.30 aWn.
Z¿Lmkv Xpd-°p∂ XobXnbpw kabhpw—
29-˛9˛2015, 3 aWn.
Z¿Lmkv t^md߃ X]men¬ th≠h¿ Abbv°p∂
Xn\pth≠ XpI (` 50) A[nIambn Abbvt°≠
XmWv. Z¿Lm-kv t^mdØns‚ hne Hm^okn¬ t\cnt´m
aWntbm¿U¿ Btbm kzoIcn°p∂XmWv. A√msXbp≈
F√m At]£Ifpw \nckn°p∂XmWv. t^mdtØmsSm∏w
ap{Z∏{Xßtfm at‰sX¶nepw tUmIypsa‚pItfm
Abbv°m≥ Bhiys∏´psIm≠p≈Xpw ta¬hnemkw
hy‡a√mØXpamb aWntbm¿UdpIƒ \nckn°p∂XmWv.
aWntbm¿UdpIƒhgn t^md߃ Bhiys∏´psIm≠p≈
At]£Iƒ Cu Hm^okn¬ 10˛9˛2015˛\v ap≥]v
In´nbncn°Ww. Xmakn®pIn´p∂ aWntbm¿UdpIƒ
\nckn°p∂XmWv. Z¿Lmkv t^mdw ssIamdm≥
]mSn√mØXpw Hcn°¬ AS® XpI Xncn®p In´p∂Xpa√.
Xmakn®v In´p∂ Z¿LmkpIƒ bmsXmcp ImcWhimepw
kzoIcn°p∂X√. IqSpX¬ hnhc߃ {]hrØn
Znhkßfn¬ Cu Hm^okn¬\n∂pw e`n°p∂XmWv.
No. C3/7430(4)/2015/MCT.
18th August 2015.
Sealed limited tenders are invited for the supply
of 3 Numbers of Syringe Pump required for
the Department of Surgery, Medical College,
Thiruvananthapuram. Tender should be superscribed
Tender numbers and addressed to the Principal, Medical
College, Thiruvananthapuram, Pin-695 011. Details can be
had from this office on working hours till 3.30 p. m.
Tender Number—25/2015.
Cost of tender form (inclusive of Sales Tax):
Original—` 630.
Duplicate— ` 315.
Last date and time of sale of tender form—
28-9-2015, 3 p. m.
Last date and time of receipt of tender—
29-9-2015, 2.30 p. m.
Opening
date
and
time
of
tender—
29-9-2015, 3 p. m.
389
15th SEPT. 2015]
STORES PURCHASE
1140
Tender form will be sent through post if required
provided due amount with sufficient postage charge
( ` 50) is sent by way of Money Order in favour of
The Principal, Medical College, Thiruvananthapuram,
Kerala State, Pin-695 011. Money Order should reach this
office on or before 10-9-2015, No other forms of
remittance will be accepted.
Technical Specifications
1.
Should be easy to use and nurse friendly.
2.
Should have large format LED/LCD/TFT display.
3.
Should have manual/automatic syringe loading with
automatic syringe recognition.
4.
Should have a minimum flow rate range from
0.1-1200 ml/hr for 50ml syringe, 0.1—100ml/hr for
20ml syringe and 0.1-60ml/hr for 10ml syringe.
5.
Syringe range from 10-50/60ml.
6.
Should have a flow rate accuracy of ± 2%.
7.
Should have a bolus rate upto 1000ml/hr for 50ml
syringe.
8.
Should have automatic and manual bolus.
9.
Should have atleast 3 levels of programmable
occlusion pressure.
10.
Should have automatic bolus reduction system to
avoid accidental bolus delivery after occlusion
incident.
11.
Should have a rechargeable battery with back up
time of minimum 2 hours.
12.
Pump must trigger following alarms with visual
indication:—
(a)
Occlusion Pressure Alarm
(b)
KVO or 3 min Pre-alarm
(c)
Syringe empty and volume infused alarm
(d)
Internal malfunction and Battery Charge Low
Alarm
(e)
Syringe disengaged and incorrectly placed
alarm
(f)
Alaram loudness control
(g)
No mains
(h)
Line disconnected (rapid pressure drop)
13. Should work with input 200 to 240 Vac 50 Hz
supply.
14. Should have safety certificate from a competent
authority CE/FDA (US)/STQC CB certificate/STQC S
certificate or valid detailed electrical and functional
safety test report from ERTL. Copy of the certificate/
test report shall be produced along with the
technical bid.
Government Medical College,
(Sd.)
Thiruvananthapuram.
Principal.
Z¿Lmkv ]ckyw
(1)
\º¿ kn2˛3625/2015/Un. kn. ‰n.
2015 BKÃv 17.
Xncp-h-\-¥-]pcw Kh¨sa‚ v Z¥¬ tImtf-Pn¬ 2015-˛16 h¿jw Hmd¬ ]tØm-fPn hIp-∏n¬ Hcp {^≠v temUnwKv
sUkvIv tSm∏v Hmt´m-t¢hv, H.Fw.F^v.Fkv. hIp-∏n-te°v c≠v {^≠v temUv (20 en‰¿ I∏m-kn-‰n)
Hmt´m-t¢hv, t{]mkvtXm-tUm-≠nIvkv hIp-∏n-te°v Hcp tjm¿´v ssk°nƒ Hmt´m-t¢hv, ]otUm-tUm-≠nIvkv
hIp-∏n-te°v c≠v {^≠v temUv Hmt´m-t¢hv hnØv hmIzw B‚ v {UbnwKv ssk°nƒ F∂nh hnX-cWw
sNøp-∂-Xn-\v \n›nX t^md-Øn¬ a’-c-kz-`m-hØ-n-ep≈ Z¿Lm-kp-Iƒ £Wn-®p-sIm-≈p-∂p. Xm¬∏cyap≈ sS≠d¿am¿
sSIv\n-°¬ _nUpw ^n\m≥jy¬ _nUpw {]tXyIw Ih-dp-I-fn¬ ap{ZWw sNbvXv ka¿∏n-t°-≠-Xm-Wv. sSIv\n-°¬ _nUv
Dƒs°m-≈n® Ih-dn\p]pdØv “sS≠¿ \º¿ 14/2015˛sSIv\n-°¬ _nUv” F∂pw ^n\m≥jy¬ _nUv Dƒs°m-≈p∂Ih-
dn\p]pdØv “sS≠¿ \º¿ 14/2015˛^n\m≥jy¬ _nUv” F∂pw Fgp-Xn- tN¿t°-≠-Xm-Wv. sSIv\n-°¬ _nUns‚bpw
^n\m≥jy¬ _nUns‚bpw Ih-dp-I-ƒ Hcp -I-h-dn-em°n Ih-dn\p]pdØv “sS≠¿ \º¿ 14/2015 hnhn[ hIp-∏pIfnte°v
Hmt´m-t¢hv hnX-cWw sNøp-∂-Xn-\pth≠n” F∂v tcJ-s∏-SpØn “Zn {]n≥kn-∏mƒ, Kh¨sa‚ v Z¥¬ tImtf-Pv, Xncp-h-\-¥-]p-cw,
]n≥-˛695 011” F∂ ta¬hn-em-k-Øn¬ FØn®pXtc-≠-Xm-Wv.
Z¿Lmkv \º¿—14/2015.
Z¿Lmkv t^md-Øns‚ hne:
A ¬—` 600.
]I¿∏v—` 300.
Z¿LmkpIƒ e`n-°p-∂-Xn-\p≈ Ah-km\ XobXn 23˛9-˛2015, 2 aWn BWv. Xma-kn®v e`n-°p∂ Z¿Lm-kp-Iƒ
kzoI-cn-°p-∂-X-√. sSIv\n-°¬ _nUv 23˛9-˛2015˛\v 3 aWn°v Z¿Lmkv \¬In-b-h-cpsStbm Ah-cpsS AwKo-IrX
{]Xn-\n-[n-I-fp-sStbm km∂n-≤y-Øn¬ Xpd-°p-∂-Xm-Wv.
390
15th SEPT. 2015]
STORES PURCHASE
1141
Z¿Lmkv ka¿∏n-°m≥ B{K-ln-°p-∂-h¿ {]n≥kn-∏mƒ, Kh¨sa‚ v Z¥¬ tIm-tf-Pv, Xncp-h-\-¥-]p-cw˛11
]n≥-˛695 011˛t\mSv At]-£n-t°-≠Xpw \n›nX sS≠¿ t^mdw hmtß-≠-Xp-am-Wv. sS≠¿ t^md-Øn-\m-bp≈
At]-£tbm-sSm∏w apI-fn¬ kqNn-∏n-®n-cn-°p∂ \nc-°n¬ Hcp t^md-Øns‚ \n›nX hne HSp-t°-≠Xpw AXv Hcp
Imc-W-h-imepw XncnsI \¬Ip-∂-Xp-a-√. Z¿Lmkv t^md-߃ ssIam‰w sNø-s∏-Sm-hp-∂-X-√. Z¿Lmkv
t^md-Øns‚ hn¬∏\ 10˛-9˛2015˛\v 3 aWn-hsc Bbn-cn-°pw. Z¿Lmkv t^md-Øns‚ hne-bmbn sN°p-I-tfm t]mtÃPv
Ãmºp-Itfm kzoI-cn-°p-∂-X-√. Z¿Lmkv t^mdw hn.]n.]n. Bbn Ab-bv°p-∂-X-√. Z¿Lmkv t^md-Øns‚ ]I¿∏v
Hmtcm-∂n-s‚bpw hne apI-fn¬ kqNn-∏n-®n-cn-°p-∂-Xm-bn-cn-°pw. X]m-en¬ Z¿Lmkv t^mdw thW-sa-∂p-≈-h¿ Z¿Lmkv
t^md-Øns‚ hne-tbm-sSm∏w ` 50 A[nIw t]mì sNe-hn-te-°mbn aWn-tbm¿U¿ aptJ\ ka¿∏n-t°≠-Xm-Wv.
aWn-tbm¿U¿ e`n-t°≠ Ah-km\ XobXn 11-˛9-˛2015˛\v 3 aWn-hsc Bbn-cn-°pw.
No. C2/3625/2015/DCT.
17th August 2015.
Sealed competitive tenders in the prescribed form are invited for the supply of a Front loading desk top autoclave
( 1 No.) for Department of Oral Pathology, Front loading 20 litre capacity autoclave (2 Nos.) for OMFS Department, Short
cycle autoclave ( 1 No.) for Department of Prosthodontics and front loading autoclave with vaccum and drying cycle
(2 Nos.) for the Department of Pedodontics of Government Dental College, Thiruvananthapuram for the year 2015-16.
Interested tenderers may submit separate “Technical bid” in one envelope superscribing “Tender
No. 14/2015-Technical bid” and separate “Financial bid” in another cover superscribing “Tender No.14/2015-Financial Bid”
and should be addressed to the ‘Principal, Government Dental College, Thiruvananthapuram, Kerala State’. Both covers
should be inserted in one cover duly sealed and should be addressed to the Principal, Government Dental College,
Thiruvananthapuram, Pin-695 011, Kerala State, superscribing “Tender No. 14/2015 for the supply of Autoclave for various
Departments”.
Tender No.—14/2015.
Cost of tender form:
Original—` 600.
Duplicate—` 300.
Last date of receipt of tenders will be 23-9-2015 at 2 p. m. Late tenders will not be accepted. The Technical bid will
be opened at 3 p. m. on 23-9-2015 in the presence of such of the tenderers or their authorized representatives, who may
be present at that time. The Financial bid will be opened after the date of opening of Technical bid under intimation to
the tenders whose Technical bid found to be acceptable and that the date of opening of Financial bid will be intimated
through e-mail, by fax and by telephone. No communication will be sent to tenderers whose Technical bid seemed to be
not acceptable.
Intending tenderers may, on application to the Principal, Government Dental College, Thiruvananthapuram,
Pin-695 011, Kerala, obtain requisite tender forms on which tenders should be submitted. Application for the tender form
should be accompanied by a cash remittance shown above, which is the price fixed for a form and which is non
refundable at any circumstances. The tender forms are not transferable. Sale of tender forms will be closed at 3 p. m. on
22-9-2015. Cheques, Postage Stamps etc. will not be accepted towards the cost of forms, nor will the forms be sent by
VPP. Duplicate tender forms, if required, will be issued by a cash remittance shown above, per copy. Tender forms will be
sent, if required, by post on payment of an additional amount of ` 50 as Postage Charge in the form of money order. Last
date of receipt of money order is 11-9-2015 at 3 p. m. The specifications and tender schedule attached to the tender
notice will forms part of this tender notice.
SCHEDULE
1.
Superscription—Tender No. 14/2015 for purchase of
(a)
Front loading desk top autoclave (1 No.) for Department of Oral Pathology,
(b)
Front loading 20 litre capacity autoclave (2 Nos.) for OMFS department,
(c)
Short cycle autoclave (1 No.) for Department of Prosthodontics and
(d)
Front loading autoclave with vaccum and drying cycle (2 Nos.) for the Department of Pedodontics.
2.
Tender form can be had from—Principal, Government Dental College, Thiruvananthapuram, Pin-695 011, Kerala,
Tel: 0471-2444092, Fax No. 2444092, [email protected].
3.
To whom tenders are to be sent—Principal, Government Dental College, Thiruvananthapuram, Pin-695 011, Kerala,
Tel: 0471-2444092, Fax No. 2444092, [email protected].
15th SEPT. 2015]
STORES PURCHASE
1142
4.
The date up to which the rates to be in firm—One year from the date of submission of tender.
5.
The rate should be inclusive of S.T. and other taxes, Duties, Levies, Insurance, Freight charges, Packing and
Forwarding charges etc. and free delivery at concerned Department/Section/Office.
6.
Tenders to be submitted in details with illustrated pamphlet (Wherever necessary) neatly typed, written manuscripts
should be avoided.
7.
All offers to the tender should be accompanied with the formal agreement executed in ` 500 Kerala Stamp Paper
contemplated in Annexure 2 Store Purchase Manual 2013, Kerala, together with the required sum of Earnest Money
Deposit (One percent of the total cost of articles strictly tendered which can be remitted by way of Crossed Demand
Draft only favouring the following.)
“ PRINCIPAL, GOVERNMENT DENTAL COLLEGE, THIRUVANANTHAPURAM ”
8.
Advance payment conditions will not be considered.
9.
Tender forms are neither transferable nor the cost refundable under any circumstances.
10.
Sample should be produced and demonstration done as and when requested.
11.
For each item the upper limit of No. of offers/rate is restricted to 2 (two) and the 2nd offer/rate for an item must be
substantiated with sufficient EMD, if the second offer is not accompanied with sufficient EMD that will not be
considered for selection. Tenders quoting more than 2 offers/ rate for an item will not be considered for selection.
12.
Soft copy of tender rate and specification in Microsoft Exce1 should be furnished along with original tender in the
following format:
Sl. No.
Item
Specification
Unit
Rate
13.
Brand name/make of item should be clearly mentioned.
14.
Tenders with insufficient EMD will not be considered for selection.
15.
Belated tenders will not be considered under any circumstances.
16.
Tenders unsealed, unsigned on all pages and appropriate spaces or submitted without superscription will be
rejected.
17.
Distributor/supplier should produce authorization from the manufacturer in their official stationary.
18.
Negotiation will be made only with the firm offering lowest price whose specification conforms to the requirements
in the tender notification and tender schedule.
19.
If complaints are reported the supplier should take back the item at their cost and risk.
20.
The undersigned reserves the right to reject any tender wholly or partially without any prior information to the
tenderers.
21.
The rate should be quoted in Indian currency and payment will be made only in Indian currency.
22.
The only jurisdiction of any dispute regarding the purchase will be at Thiruvananthapuram.
23.
The photocopies of the documents produced along with tender should be attested by a Gazetted Officer.
24.
If the date scheduled for opening of tender is declared as a holiday, tenders will be opened on the next working
day at the same time, same place.
25.
Tenders should bear the Signature/Seal and full Postal Address, Fax No., Telephone No. and Mobile Phone No. of
the tenderer wherever necessary.
26.
Tenders will be opened in the presence of such of the tenderers or their authorized representatives who may be
present at that time and they should have valid authorization letter.
27.
Compliance statements of each of the specification should be furnished, clearly.
28.
Warranty condition should be stated.
29.
Offer of AMC/CAMC should be specifically mentioned.
30.
The conditions prescribed in the schedule and detailed specification of equipments will form part of tender notice.
31.
Warranty prescribed for the tender is as follows: Tender No. 07/2015—2 years.
32.
AMC/CAMC prescribed for the tender is as follows: Tender No. 07/2015—5 years after warranty period.
33.
The conditions prescribed in the schedule and detailed specification of equipments will form part of tender notice.
392
15th SEPT. 2015]
STORES PURCHASE
1143
Details of Items
Tender No.—14/2015
Sl. No.
Department
Name of Equipment and Quantity
Specification
4
Oral Pathology
Autoclave—1 No.
Front loading desktop
9
OMFS
Autoclave—2 Nos.
Front loading-20 litre capacity
34
Prosthodontics
Short cycle
Shortcycle and high volume pre and
Autoclave—1 No.
post vacuum pump for perfect
class B sterilization results.
316 L grade stainless steel chamber
and
door with
electro
polish
finish. A built in steam generator
provides steam and facilitates a
standby.
38
Pedodontics
Front loading Autoclave
Table top, 22 lts or higher capacity,
with Vacuum and Drying
Fully automatic micro-processor
Cycle —2 Nos.
based control. Sterilization chamber
made up of thick stainless steel
sheet, tested for high pressure.
Digital timer both for wet &
dry cycle. Auto drain of water to
reservoir tank & also condensation.
Alarm after the total command is
completed. CE certified for safety and
sterilisation capacity.
(2)
\º¿ kn2˛3928/2015/Un. kn. ‰n.
2015 BKÃv 17.
Xncp-h-\-¥-]pcw Kh¨sa‚ v Z¥¬ tImtf-Pn¬ 2015-˛16 h¿jw ]otUm-tUm-≠nIvkv hIp-∏n-te°v Hcp ^vfmjv Hmt´m-t¢-hv,
s]cn-tbm-tUm-≠nIvkv hIp-∏n-te°v c≠v t]m¿´-_nƒ Hmt´m-t¢-hv F∂nh hnX-cWw sNøp-∂-Xn-\v \n›nX t^md-Øn¬
a’-c-kz-`m-h-Øn-ep≈ Z¿Lm-kp-Iƒ £Wn-®p-sIm-≈p-∂p. Xm¬∏cyap≈ sS≠¿am¿ sSIv\n-°¬ _nUpw ^n\m≥jy¬
_nUpw {]tXyIw Ih-dp-I-fn¬ ap{ZWw sNbvXv ka¿∏n-t°-≠-Xm-Wv. sSIv\n-°¬ _nUv Dƒs°m-≈n® Ih-dn\p]pdØv “sS≠¿
\º¿ 15/2015—sSIv\n-°¬ _nUv” F∂pw ^n\m≥jy¬ _nUv Dƒs°m-≈p∂Ih-dn\p]pdØv “sS≠¿ \º¿
15/2015˛^n\m≥jy¬ _nUv” F∂pw Fgp-Xn-tN¿t°-≠-Xm-Wv. sSIv\n-°¬ _nUns‚bpw ^n\m≥jy¬ _nUns‚bpw
Ih-dp-I-ƒ Hcp -I-h-dn-em°n Ih-dn\p]pdØv “sS≠¿ \º¿ 15/2015 hnhn[ hIp-∏pIfnte°v Hmt´m-t¢hv hnX-cWw
sNøp-∂-Xn-\pth≠n F∂v tcJ-s∏-SpØn “Zn {]n≥kn-∏mƒ, Kh¨sa‚ v Z¥¬ tImtf-Pv, Xncp-h-\-¥-]p-cw, ]n≥-˛695 011”
F∂ ta¬hn-em-k-Øn¬ FØn®p Xtc-≠-Xm-Wv.
Z¿Lmkv \º¿—15/2015.
Z¿Lmkv t^md-Øns‚ hne:
A ¬—` 900.
]I¿∏v—` 450.
Z¿LmkpIƒ e`n-°p-∂-Xn-\p≈ Ah-km\ XobXn 23˛9-˛2015, 2 aWn BWv. Xma-kn®v e`n-°p∂ Z¿Lm-kp-Iƒ
kzoI-cn-°p-∂-X-√. sSIv\n-°¬ _nUv 23˛9-˛2015, 3 aWn°v Z¿Lmkv \¬In-b-h-cpsStbm Ah-cpsS AwKo-IrX
{]Xn-\n-[n-I-fp-sStbm km∂n-≤y-Øn¬ Xpd-°p-∂-Xm-Wv.
Z¿Lmkv ka¿∏n-°m≥ B{K-ln-°p-∂-h¿ {]n≥kn-∏mƒ, Kh¨sa‚ v Z¥¬ tIm-tf-Pv, Xncp-h-\-¥-]p-cw,
]n≥-˛695 011 F∂ hnem-k-Øn¬ At]-£n-t°-≠Xpw \n›nX sS≠¿ t^mdw hmtß-≠-Xp-am-Wv. sS≠¿ t^md-Øn-\m-bp≈
At]-£tbm-sSm∏w apI-fn¬ kqNn-∏n-®n-cn-°p∂ \nc-°n¬ Hcp t^md-Øns‚ \n›nX hne HSp-t°-≠Xpw AXv Hcp
Imc-W-h-imepw XncnsI \¬Ip-∂-Xp-a-√. Z¿Lmkv t^md-߃ ssIam‰w sNø-s∏-Sm-hp-∂-X-√. Z¿Lmkv
t^md-Øns‚ hn¬∏\ 22˛-9˛2015˛\v 3 aWn-hsc Bbn-cn-°pw. Z¿Lmkv t^md-Øns‚ hne-bmbn sN°p-I-tfm t]mtÃPv
Ãmºp-Itfm kzoI-cn-°p-∂-X-√. Z¿Lmkv t^mdw hn.]n.]n. Bbn Ab-bv°p-∂-X-√. Z¿Lmkv t^md-Øns‚ ]I¿∏v
Hmtcm-∂n-s‚bpw hne apI-fn¬ kqNn-∏n-®n-cn-°p-∂-Xm-bn-cn-°pw. X]m-en¬ Z¿Lmkv t^mdw thW-sa-∂p-≈-h¿ Z¿Lmkv
t^md-Øns‚ hne-tbm-sSm∏w ` 50 A[nIw t]mì sNe-hn-te-°mbn aWn-tbm¿U¿ aptJ\ ka¿∏n-t°≠-Xm-Wv.
aWn-tbm¿U¿ e`n-t°≠ Ah-km\ XobXn 11-˛9-˛2015˛\v 3 aWn-hsc Bbn-cn-°pw.
393
15th SEPT. 2015]
STORES PURCHASE
1144
No. C2/3928/2015/DCT.
17th August 2015.
Sealed competitive tenders in the prescribed form are invited for the supply of Flash Autoclave
( 1 No.) for Department of Pedodontics and Portable Autoclave (2 Nos.) for Periodontics Department of Government
Dental College, Thiruvananthapuram for the year 2015-16. Interested tenderers may submit separate “Technical bid” in
one envelope superscribing “Tender No. 15/2015—Technical bid” and separate “Financial bid” in another cover
superscribing “Tender No.15/2015—Financial Bid” and should be addressed to the ‘Principal, Government Dental College,
Thiruvananthapuram, Kerala State’. Both covers should be inserted in one cover duly sealed and should be addressed
to the Principal, Government Dental College, Thiruvananthapuram, Pin-695 011, Kerala State, superscribing ‘Tender
No. 15/2015 for the supply of Autoclave for Pedodontics and Periodontics Departments’.
Tender No.—15/2015.
Cost of tender form:
Original—` 900.
Duplicate—` 450.
Last date of receipt of tenders will be 23-9-2015 at 2 p. m. Late tenders will not be accepted. The Technical bid will
be opened at 3 p. m. on 23-9-2015 in the presence of such of the tenderers or their authorized representatives, who may
be present at that time. The Financial bid will be opened after the date of opening of Technical bid under intimation to
the tenderers whose Technical bid found to be acceptable and that the date of opening of Financial bid will be intimated
through e-mail, by fax and by telephone. No communication will be sent to tenderers whose Technical bid seemed to be
not acceptable.
Intending tenderers may, on application to the Principal, Government Dental College, Thiruvananthapuram,
Pin-695 011, Kerala, obtain requisite tender forms on which tenders should be submitted. Application for the tender form
should be accompanied by a cash remittance shown above, which is the price fixed for a form and which is not
refundable at any circumstances. The tender forms are not transferable. Sale of tender forms will be closed at 3 p. m. on
22-9-2015. Cheques, postage stamps etc. will not be accepted towards the cost of forms, nor will the forms be sent by
VPP. Duplicate tender forms, if required, will be issued by a cash remittance shown above, per copy. Tender forms will be
sent, if required, by post on payment of an additional amount of ` 50 as postage charge in the form of money order.
Last date of receipt of money order is 11-9-2015 at 3 p. m. The specifications and tender schedule attached to the tender
notice will form part of this tender notice.
SCHEDULE
1.
Superscription—Tender No. 15/2015 for purchase of
(a)
Flash Autoclave 1 No. for Department of Pedodontics.
(b)
Portable Autoclave for Periodontics Department
2.
Tender form can be had from Principal, Government Dental College, Thiruvananthapuram, Pin-695 011, Kerala,
Tel: 0471-2444092, Fax No. 2444092 [email protected]
3.
To whom tenders are to be sent—Principal, Government Dental College, Thiruvananthapuram, Pin-695 011, Kerala,
Tel: 0471-2444092, Fax No. 2444092 [email protected]
4.
The date up to which the rates to be in firm—One year from the date of submission of tender.
5.
The rate should be inclusive of S.T. and other taxes, duties, levies, insurance, freight charges, packing and
forwarding charges etc. and free delivery at concerned Department/Section/Office.
6.
Tenders to be submitted in details with illustrated pamphlet (wherever necessary) neatly typed, written manuscripts
should be avoided.
7.
All offers to the tender should be accompanied with the formal agreement executed in ` 500 Kerala Stamp Paper
contemplated in Annexure 2 Store Purchase Manual 2013, Kerala, together with the required sum of Earnest Money
Deposit (One percent of the total cost of articles strictly tendered which can be remitted by way of Crossed Demand
Draft only favouring the following.)
“ PRINCIPAL, GOVERNMENT DENTAL COLLEGE, THIRUVANANTHAPURAM ”
394
15th SEPT. 2015]
STORES PURCHASE
1145
8.
Advance payment conditions will not be considered.
9.
Tender forms are neither transferable nor the cost refundable under any circumstances.
10.
Sample should be produced and demonstration done as and when requested.
11.
For each item the upper limit of No. of offers/rate is restricted to 2 (two) and the 2nd offer/rate for an item must be
substantiated with sufficient EMD, if the second offer is not accompanied with sufficient EMD that will not be
considered for selection. Tenders quoting more than 2 offers/ rate for an item will not be considered for selection.
12.
Soft copy of tender rate and specification in Microsoft Exce1 should be furnished along with original tender in the
following format.
Sl. No.
Item
Specification
Unit
Rate
13.
Brand name/make of item should be clearly mentioned.
14.
Tenders with insufficient EMD will not be considered for selection.
15.
Belated tenders will not be considered under any circumstances.
16.
Tenders unsealed, unsigned on all pages and appropriate spaces or submitted without superscription will be
rejected.
17.
Distributor/supplier should produce authorization from the manufacturer in their official stationary.
18.
Negotiation will be made only with the firm offering lowest price whose specification conforms to the requirements
in the tender notification and tender schedule.
19.
If complaints are reported the supplier should take back the item at their cost and risk.
20.
The undersigned reserves the right to reject any tender wholly or partially without any prior information to the
tenderers.
21.
The rate should be quoted in Indian currency and payment will be made only in Indian currency.
22.
The only jurisdiction of any dispute regarding the purchase will be at Thiruvananthapuram.
23.
The photocopies of the documents produced along with tender should be attested by a Gazetted Officer.
24.
If the date scheduled for opening of tender is declared as a holiday, tenders will be opened on the next working
day at the same time, same place.
25.
Tenders should bear the signature/seal and full Postal address, Fax No., Telephone No. and Mobile Phone No. of
the tenderer wherever necessary.
26.
Tenders will be opened in the presence of such of the tenderers or their authorized representatives who may be
present at that time and they should have valid autherization letter.
27.
Compliance statements of each of the specification should be furnished, clearly.
28.
Warranty condition should be stated.
29.
The conditions prescribed in the schedule and detailed specification of equipments will form part of tender notice.
Details of Items
Tender No. 15/2015.
Sl.No.
Department
Name of Equipment and Quantity
Specification
42
Periodontics
Portable Autoclave—2 (Two)
Portable autoclave, chamber capacity
19L, size 210, dia x 550mm dia, power
230 VAC 50HZ 4KW
39
Pedodontics
Flash Autoclave —1 (One)
Designed to provide fast, 8 minute
point
of
use
sterilisation
of
unwrapped dental hand pieces
for immediate use, CE certification
Preferably
Scican
Statim
2000S & 5000S - CLASSIC
15th SEPT. 2015]
STORES PURCHASE
1146
(3)
\º¿ kn2˛3624/2015/Un. kn. ‰n.
2015 BKÃv 17.
Xncp-h-\-¥-]pcw Kh¨sa‚ v Z¥¬ tImtf-Pn¬ 2015-˛16 h¿jw hnhn[ hIp-∏pIfn-te°v b{¥-km-a-{Kn-Iƒ
hnX-cWw sNøp-∂-Xn-\v \n›nX t^md-Øn¬ a’-c-kz-`m-h-Øn-ep≈ Z¿Lm-kp-Iƒ £Wn-®p-sIm-≈p-∂p. Xm¬]cyap≈
sS≠¿am¿ sSIv\n-°¬ _nUpw ^n\m≥jy¬ _nUpw {]tXyIw Ih-dp-I-fn¬ ap{ZWw sNbvXv ka¿∏n-t°-≠-Xm-Wv.
sSIv\n-°¬ _nUv Dƒs°m-≈n® Ih-dn\p]pdØv “sS≠¿ \º¿ 16/2015˛sSIv\n-°¬ _nUv” F∂pw ^n\m≥jy¬ _nUv
Dƒs°m-≈p∂Ih-dn\p]pdØv “sS≠¿ \º¿ 16/2015˛^n\m≥jy¬ _nUv” F∂pw Fgp-Xn -tN¿t°-≠-Xm-Wv. sSIv\n-°¬
_nUns‚bpw ^n\m≥jy¬ _nUns‚bpw Ih-dp-I-ƒ Hcp -I-h-dn-em°n Ih-dn\p]pdØv “sS≠¿ \º¿ 16/2015-˛hnhn[
b{¥-km-a-{Kn-Iƒ hnX-cWw sNøp-∂-Xn-\pth≠n” F∂v tcJ-s∏-SpØn “Zn {]n≥kn-∏mƒ, Kh¨sa‚ v Z¥¬ tImtf-Pv,
Xncp-h-\-¥-]p-cw, ]n≥-˛695 011” F∂ta¬hn-em-k-Øn¬ FØn®p Xtc-≠-Xm-Wv.
Z¿Lmkv \º¿—16/2015.
Z¿Lmkv t^md-Øns‚ hne:
A ¬—` 1,000.
]I¿∏v—` 500.
Z¿LmkpIƒ e`n-°p-∂-Xn-\p≈ Ah-km\ XobXn 1˛10˛2015, 2 aWn BWv. Xma-kn®v e`n-°p∂ Z¿Lm-kp-Iƒ
kzoI-cn-°p-∂-X-√. sSIv\n-°¬ _nUv 1˛10˛2015˛\v 3 aWn°v Z¿Lmkv \¬In-b-h-cpsStbm Ah-cpsS AwKo-IrX
{]Xn-\n-[n-I-fp-sStbm km∂n-≤y-Øn¬ Xpd-°p-∂-Xm-Wv.
Z¿Lmkv ka¿∏n-°m≥ B{K-ln-°p-∂-h¿ {]n≥kn-∏mƒ, Kh¨sa‚ v Z¥¬ tIm-tf-Pv, Xncp-h-\-¥-]p-cw,
]n≥-˛695 011 F∂ hnem-k-Øn¬ At]-£n-t°-≠Xpw \n›nX sS≠¿ t^mdw hmtß-≠-Xp-am-Wv. sS≠¿
t^md-Øn-\m-bp≈ At]-£tbm-sSm∏w apI-fn¬ kqNn-∏n-®n-cn-°p∂ \nc-°n¬ Hcp t^md-Øns‚ \n›nX hne HSp-t°-≠Xpw
AXv Hcp Imc-W-h-imepw XncnsI \¬Ip-∂-Xp-a-√. Z¿Lmkv t^md-߃ ssIam‰w sNø-s∏-Sm-hp-∂-X-√. Z¿Lmkv
t^md-Øns‚ hn¬∏\ 30˛-9˛2015˛\v 3 aWn-hsc Bbn-cn-°pw. Z¿Lmkv t^md-Øns‚ hne-bmbn sN°p-I-tfm t]mtÃPv
Ãmºp-Itfm kzoI-cn-°p-∂-X-√. Z¿Lmkv t^mdw hn.]n.]n. Bbn Ab-bv°p-∂-X-√. Z¿Lmkv t^md-Øns‚ ]I¿∏v
Hmtcm-∂n-s‚bpw hne apI-fn¬ kqNn-∏n-®n-cn-°p-∂-Xm-bn-cn-°pw. X]m-en¬ Z¿Lmkv t^mdw thW-sa-∂p-≈-h¿ Z¿Lmkv
t^md-Øns‚ hne-tbm-sSm∏w ` 50 A[nIw t]mì sNe-hn-te-°mbn aWn-tbm¿U¿ aptJ\ ka¿∏n-t°≠-Xm-Wv.
aWn-tbm¿U¿ e`n-t°≠ Ah-km\ XobXn 19˛9-˛2015˛\v 3 aWn- Bbn-cn-°pw.
No. C2/3624/2015/DCT.
17th August 2015.
Sealed competitive tenders in the prescribed form are invited for the supply of Equipments required for various
Departments of this College for the year 2015-16 as detailed in the specification appended. Interested tenderers may
submit separate “Technical bid” in one envelope superscribing “Tender No. 16/2015-Technical bid” and separate
“Financial bid” in another cover superscribing “Tender No.16/2015-Financial Bid” and should be addressed to the
‘Principal, Government Dental College, Thiruvananthapuram, Kerala State’. Both covers should be inserted in one
cover duly sealed and should be addressed to the Principal, Government Dental College, Thiruvananthapuram, Pin-695 011,
Kerala State, superscribing ‘Tender No. 16/2015 for the supply of Equipments for various Departments”.
Tender No.—16/2015.
Cost of tender form:
Original—` 1,000.
Duplicate—` 500.
Last date of receipt of tenders will be 1-10-2015 at 2 p. m. Late tenders will not be accepted. The Technical bid will
be opened at 3 p. m. on 1-10-2015 in the presence of such of the tenderers or their authorized representatives, who may
be present at that time. The Financial bid will be opened after the date of opening of Technical bid under intimation to
the tenderers whose Technical bid found to be acceptable and that the date of opening of Financial bid will be intimated
through e-mail, by fax and by telephone. No communication will be sent to tenderers whose Technical bid seemed to be
not acceptable.
Intending tenderers may, on application to the Principal,Government Dental College, Thiruvananthapuram, Pin-695 011,
Kerala, obtain requisite tender forms on which tenders should be submitted. Application for the tender form should be
accompanied by a cash remittance shown above, which is the price fixed for a form and which is not refundable under
any circumstances. The tender forms are not transferable. Sale of tender forms will be closed at 3 p. m. on 30-9-2015.
Cheques, Postage Stamps etc. will not be accepted towards the cost of forms, nor will the forms be sent by VPP.
Duplicate tender forms, if required, will be issued by a cash remittance shown above, per copy. Tender forms will be
sent, if required, by post on payment of an additional amount of ` 50 as postage charge in the form of money order.
Last date of receipt of money order is 19-9-2015 at 3 p. m. The specifications and tender schedule attached to the tender
notice will forms part of this tender notice.
396
15th SEPT. 2015]
STORES PURCHASE
1147
SCHEDULE
1.
“Superscription—“Tender No. 16/2015 for purchase of equipments required for Various Departments”.
2.
Tender form can be had from—Principal, Government Dental College, Thiruvananthapuram, Pin-695 011, Kerala,
Tel: 0471-2444092, Fax No. 2444092 [email protected]
3.
To whom tenders are to be sent—Principal, Government Dental College, Thiruvananthapuram, Pin-695 011, Kerala,
Tel: 0471-2444092, Fax No. 2444092 [email protected]
4.
The date up to which the rates to be in firm—One year from the date of submission of tender.
5.
The rate should be inclusive of S.T. and other taxes, duties, levies, insurance, freight charges, packing and
forwarding charges etc. and free delivery at concerned Department/Section/Office.
6.
Tenders to be submitted in details with illustrated pamphlet (Wherever necessary) neatly typed, written manuscripts
should be avoided.
7.
All offers to the tender should be accompanied with the formal agreement executed in ` 500 Kerala Stamp Paper
contemplated in Annexure 2 Store Purchase Mannual 2013, Kerala, together with the required sum of Earnest Money
Deposit (One percent of the total cost of articles strictly tendered which can be remitted by way of Crossed Demand
Draft only favouring the following.)
“ PRINCIPAL, GOVERNMENT DENTAL COLLEGE, THIRUVANANTHAPURAM ”
8.
Advance payment conditions will not be considered.
9.
Tender forms are neither transferable nor the cost refundable under any circumstances.
10.
Sample should be produced and demonstration done as and when requested.
11.
For each item the upper limit of No. of offers/rate is restricted to 2 (two) and the 2nd offer/rate for an item must be
substantiated with sufficient EMD, if the second offer is not accompanied with sufficient EMD that will not be
considered for selection. Tenders quoting more than 2 offers/ rate for an item will not be considered for selection.
12.
Soft copy of tender rate and specification in Microsoft Exce1 should be furnished along with original tender in the
following format.
Sl. No.
Item
Specification
Unit
Rate
13.
Brand name/make of item should be clearly mentioned.
14.
Tenders with insufficient EMD will not be considered for selection.
15.
Belated tenders will not be considered under any circumstances.
16.
Tenders unsealed, unsigned on all pages and appropriate spaces or submitted without superscription will be
rejected.
17.
Distributor/supplier should produce authorization from the manufacturer in their official stationary.
18.
Negotiation will be made only with the firm offering lowest price whose specification conforms to the requirements
in the tender notification and tender schedule.
19.
If complaints are reported the supplier should take back the item at their cost and risk.
20.
The undersigned reserves the right to reject any tender wholly or partially without any prior information to the
tenderers.
21.
The rate should be quoted in Indian currency and payment will be made only in Indian currency.
22.
The only jurisdiction of any dispute regarding the purchase will be at Thiruvananthapuram.
23.
The photocopies of the documents produced along with tender should be attested by a Gazetted Officer.
24.
If the date scheduled for opening of tender is declared as a holiday, tenders will be opened on the next working
day at the same time, same place.
25.
Tenders should bear the signature/seal and full Postal address, Fax No., Telephone No. and Mobile Phone No. of
the tenderer wherever necessary.
397
15th SEPT. 2015]
STORES PURCHASE
1148
26.
Tenders will be opened in the presence of such of the tenderers or their authorized representatives who may be
present at that time and they should have valid authorization letter.
27.
Compliance statements of each of the specification should be furnished, clearly.
28.
Warranty condition should be stated.
29.
Offer of AMC/CAMC should be specifically mentioned.
30.
The conditions prescribed in the schedule and detailed specification of equipments will forms part of tender notice.
Details of Items
Tender No. 16/2015
Item
Department
Name of the Equipment
Specification
No.
with Quantity
6
OMFS
Electrocautery—2
Bipolar and unipolar lead outlets and
leads, foot control, patient plate with
accessories along with control box
10
OMFS
Portable Pulse
Portable with battery with optional
Oxymeter—1
ECG monitoring
21
OMFS
Vacuum Cleaner—1
3 in one
22
OMFS
Surgical Loupe—1
x4 magnification with adjustable
frame
24
OMFS
Debrillator—1
25
OMFS
Fibre optic headlight—2
Storz type
35
Prosthodontics
Compact desktop
Box type, Dreve polylux 500 light
light curing unit—1
curing
unit,
Built
in
timer,
Dimensions:External W215xD190 x HI
10 mm,
Intemal-W 150 x D95 x H50mm.
398 PLX500 Model
44
Periodontics
Surgical Loupes with
Magnification 4-25 range
magnifying glass—1
Microneedle holder and scissors
48
Periodontics
Implant Surgical kit—1
Equinox myraid
(4)
\º¿ kn2˛3958/2015/Un. kn. ‰n.
2015 BKÃv 17.
Xncp-h-\-¥-]pcw Kh¨sa‚ v Z¥¬ tImtf-Pn¬ 2015-˛16 h¿jw hnhn[ hIp-∏pIfn-te°v b{¥-km-a-{Kn-Iƒ
hnX-cWw sNøp-∂-Xn-\v \n›nX t^md-Øn¬ a’-c-kz-`m-h-Øn-ep≈ Z¿Lm-kp-Iƒ £Wn-®p-sIm-≈p-∂p. Xm¬∏cyap≈
sS≠d¿am¿ sSIv\n-°¬ _nUpw ^n\m≥jy¬ _nUpw {]tXyIw Ih-dp-I-fn¬ ap{ZWw sNbvXv ka¿∏n-t°-≠-Xm-Wv.
sSIv\n-°¬ _nUv Dƒs°m-≈n® Ih-dn\p]pdØv “sS≠¿ \º¿ 17/2015˛sSIv\n-°¬ _nUv” F∂pw ^n\m≥jy¬ _nUv
Dƒs°m-≈p∂Ih-dn\p]pdØv “sS≠¿ \º¿ 17/2015˛^n\m≥jy¬ _nUv” F∂pw Fgp-Xn -tN¿t°-≠-Xm-Wv. sSIv\n-°¬
_nUns‚bpw ^n\m≥jy¬ _nUns‚bpw Ih-dp-I-ƒ Hcp -I-h-dn-em°n Ih-dn\p]pdØv “sS≠¿ \º¿ 17/2015 hnhn[
b{¥-km-a-{Kn-Iƒ hnX-cWw sNøp-∂-Xn-\pth≠nv” F∂v tcJ-s∏-SpØn “Zn {]n≥kn-∏mƒ, Kh¨sa‚ v Z¥¬ tImtf-Pv,
Xncp-h-\-¥-]p-cw, ]n≥-˛695 011” F∂ta¬hn-em-k-Øn¬ FØn®p Xtc-≠-Xm-Wv.
Z¿Lmkv \º¿—17/2015.
Z¿Lmkv t^md-Øns‚ hne:
A ¬—` 1,000.
]I¿∏v—` 500.
398
15th SEPT. 2015]
STORES PURCHASE
1149
Z¿LmkpIƒ e`n-°p-∂-Xn-\p≈ Ah-km\ XobXn 1˛10˛2015, 2 aWn BWv. Xma-kn®v e`n-°p∂ Z¿Lm-kp-Iƒ
kzoI-cn-°p-∂-X-√. sSIv\n-°¬ _nUv 1˛10˛2015˛\v 3 aWn°v Z¿Lmkv \¬In-b-h-cpsStbm Ah-cpsS AwKo-IrX
{]Xn-\n-[n-I-fp-sStbm km∂n-≤y-Øn¬ Xpd-°p-∂-Xm-Wv.
Z¿Lmkv ka¿∏n-°m≥ B{K-ln-°p-∂-h¿ {]n≥kn-∏mƒ, Kh¨sa‚ v Z¥¬ tIm-tf-Pv, Xncp-h-\-¥-]p-cw,
]n≥-˛695 011 F∂ hnem-k-Øn¬ At]-£n-t°-≠Xpw \n›nX sS≠¿ t^mdw hmtß-≠-Xp-am-Wv. sS≠¿
t^md-Øn-\m-bp≈ At]-£tbm-sSm∏w apI-fn¬ kqNn-∏n-®n-cn-°p∂ \nc-°n¬ Hcp t^md-Øns‚ \n›nX hne HSp-t°-≠Xpw
AXv Hcp Imc-W-h-imepw XncnsI \¬Ip-∂-Xp-a-√. Z¿Lmkv t^md-߃ ssIam‰w sNø-s∏-Sm-hp-∂-X-√. Z¿Lmkv
t^md-Øns‚ hn¬∏\ 30˛-9˛2015˛\v 3 aWn-hsc Bbn-cn-°pw. Z¿Lmkv t^md-Øns‚ hne-bmbn sN°p-I-tfm t]mtÃPv
Ãmºp-Itfm kzoI-cn-°p-∂-X-√. Z¿Lmkv t^mdw hn.]n.]n. Bbn Ab-bv°p-∂-X-√. Z¿Lmkv t^md-Øns‚ ]I¿∏v
Hmtcm-∂n-s‚bpw hne apI-fn¬ kqNn-∏n-®n-cn-°p-∂-Xm-bn-cn-°pw. X]m-en¬ Z¿Lmkv t^mdw thW-sa-∂p-≈-h¿ Z¿Lmkv
t^md-Øns‚ hne-tbm-sSm∏w ` 50 A[nIw t]mì sNe-hn-te-°mbn aWn-tbm¿U¿ aptJ\ ka¿∏n-t°≠-Xm-Wv.
aWn-tbm¿U¿ e`n-t°≠ Ah-km\ XobXn 19˛9-˛2015˛\v 3 aWn- Bbn-cn-°pw.
No. C2/3958/2015/DCT.
17th August 2015.
Sealed competitive tenders in the prescribed form are invited for the supply of Equipments required for various
Departments of Government Dental College, Thiruvananthapuram for the year 2015-16 as detailed in the specification
appended. Interested tenderers may submit separate “Technical bid” in one envelope superscribing “Tender No. 17/2015—
Technical bid” and separate “Financial bid” in another cover superscribing “Tender No.17/2015-Financial Bid” and should
be addressed to the ‘Principal, Government Dental College, Thiruvananthapuram, Kerala State’. Both covers should be
inserted in one cover duly sealed and should be addressed to the Principal, Government Dental College,
Thiruvananthapuram, Pin-695 011, Kerala State, superscribing “Tender No. 17/2015 for the supply of Equipments for
various Departments”.
Tender No.—17/2015.
Cost of tender form:
Original—` 1,000.
Duplicate—` 500.
Last date of receipt of tenders will be 1-10-2015 at 2 p. m. Late tenders will not be accepted. The Technical bid will
be opened at 3 p. m. on 1-10-2015 in the presence of such of the tenderers or their authorized representatives, who may
be present at that time. The Financial bid will be opened after the date of opening of Technical bid under intimation to
the tenderers whose Technical bid found to be acceptable and that the date of opening of Financial bid will be intimated
through e-mail, by fax and by telephone. No communication will be sent to tenderers whose Technical bid seemed to be
not acceptable.
Intending tenderers may, on application to the Principal,Government Dental College, Thiruvananthapuram, Pin-695 011,
Kerala, obtain requisite tender forms on which tenders should be submitted. Application for the tender form should be
accompanied by a cash remittance shown above, which is the price fixed for a form and which is not refundable at any
circumstances. The tender forms are not transferable. Sale of tender forms will be closed at 3 p. m. on 30-9-2015.
Cheques, Postage Stamps etc. will not be accepted towards the cost of forms, nor will the forms be sent by VPP.
Duplicate tender forms, if required, will be issued by a cash remittance shown above, per copy, Tender forms will be
sent, if required, by post on payment of an additional amount of ` 50 as postage charge in the form of money order.
Last date of receipt of money order is 19-9-2015 at 3 p. m. The specifications and tender schedule attached to the tender
notice will forms part of this tender notice.
SCHEDULE
1.
Superscription—Tender No. 17/2015 for purchase of equipments for Various Departments.
2.
Tender form can be had from—Principal, Government Dental College, Thiruvananthapuram, Pin-695 011, Kerala,
Tel: 0471-2444092, Fax No. 2444092 [email protected]
3.
To whom tenders are to be sent—Principal, Government Dental College, Thiruvananthapuram, Pin-695 011, Kerala,
Tel: 0471-2444092, Fax No. 2444092 [email protected]
4.
The date up to which the rates to be in firm—One year from the date of submission of tender.
5.
The rate should be inclusive of S.T. and other taxes, duties, levies, insurance, freight charges, packing and
forwarding charges etc. and free delivery at concerned Department/Section/Office.
6.
Tenders to be submitted in details with illustrated pamphlet (Wherever necessary) neatly typed, written manuscripts
should be avoided.
15th SEPT. 2015]
STORES PURCHASE
1150
7.
All offers to the tender should be accompanied with the formal agreement executed in ` 500 Kerala Stamp Paper
contemplated in Annexure 2 Store Purchase Mannual 2013, Kerala, together with the required sum of Earnest Money
Deposit (One percent of the total cost of articles strictly tendered which can be remitted by way of Crossed Demand
Draft only favouring the following).
“ PRINCIPAL, GOVERNMENT DENTAL COLLEGE, THIRUVANANTHAPURAM ”
8.
Advance payment conditions will not be considered.
9.
Tender forms are neither transferable nor the cost refundable under any circumstances.
10.
Sample should be produced and demonstration done as and when requested.
11.
For each item the upper limit of No. of offers/rate is restricted to 2 (two) and the 2nd offer/rate for an item must be
substantiated with sufficient EMD, if the second offer is not accompanied with sufficient EMD that will not be
considered for selection. Tenders quoting more than 2 offers/ rate for an item will not be considered for selection.
12.
Soft copy of tender rate and specification in Microsoft Exce1 should be furnished along with original tender in the
following format.
Sl. No.
Item
Specification
Unit
Rate
13.
Brand name/make of item should be clearly mentioned.
14.
Tenders with insufficient EMD will not be considered for selection.
15.
Belated tenders will not be considered under any circumstances.
16.
Tenders unsealed, unsigned on all pages and appropriate spaces or submitted without superscription will be
rejected.
17.
Distributor/supplier should produce authorization from the manufacturer in their official stationary.
18.
Negotiation will be made only with the firm offering lowest price whose specification conforms to the requirements
in the tender notification and tender schedule.
19.
If complaints are reported the supplier should take back the item at their cost and risk.
20.
The undersigned reserves the right to reject any tender wholly or partially without any prior information to the
tenderers.
21.
The rate should be quoted in Indian currency and payment will be made only in Indian currency.
22.
The only jurisdiction of any dispute regarding the purchase will be at Thiruvananthapuram.
23.
The photocopies of the documents produced along with tender should be attested by a Gazetted Officer.
24.
If the date scheduled for opening of tender is declared as holiday, tenders will be opened on the next working day
at the same time, same place.
25.
Tenders should bear the signature/seal and full Postal address, Fax No., Telephone No. and Mobile Phone No. of
the tenderer wherever necessary.
26.
Tenders will be opened in the presence of such of the tenderers or their authorized representatives who may be
present at that time and they should have valid authorization letter.
27.
Compliance statements of each of the specification should be furnished, clearly.
28.
Warranty condition should be stated.
29.
Offer of AMC/CAMC should be specifically mentioned.
30.
The conditions prescribed in the schedule and detailed specification of equipments will forms part of tender notice.
400
15th SEPT. 2015]
STORES PURCHASE
1151
Details of items
Tender No. 17/2015.
Item.
Name of
Name of the Equipment
Specification
No.
Department
with Quantity
28
Prosthodontics
Hanau wide Vue
Articulator with all accessories
Articulator—1 No.
Spring face bow
3 Pairs of mounting rings
30
Prosthodontics
High Speed Lathe—1 No.
(i)
Variable Speed Lathe 1/3 HP
(Trimming &
(ii)
Model PR 92 Lathe
polishing)
(iii)
Ray Foster type
(iv)
300-4000 RPM Speed Range
(v)
Quick change chuck is easily mounted on
right side
(vi)
Constant torque 1/3 HP through the entire
speed range
(vii) Standard dental taper shafts with chuck
removers will accomodate all types of chucks
(viii) lndustrial grade, sealed ball bearings never
need lubrication
(ix)
UL recognized and CSA certified for electrical
safety
(x)
Rugged construction modern design
(xi)
Base can be bench mounted
32
Prosthodontics
Spindle Grinder with
High and low belt controlled speed
Vaccum suction—1 No.
(i)
Adjustable spindle working height
(ii)
Heavy duty,1/4 HP capacitor start motor in a
totally enclosed housing
(iii)
2.5" suction port for connection to Ray
Foster Cyclone Dust Collector or other dust
collector system
(iv)
Power output connection for automatic on/off
of dust collector
(v)
New compact design
(vi)
Motor is UL-recognized and CSA-certified for
electrical safety
49
Periodontics
Physiodispensor with
(i)
Upto 80 Ncm torque
hand piece—1 No.
(ii)
Flexible speed control between 200-40,000/min
(iii)
User programmable preset memories
(iv)
Hands free operation via foot control unit
(v)
Autoclave Handpiece
(vi)
Max. Output/max. Torque:210W/80Ncm
(vii) Poer supply : AC120V/230V, 50/60 Hz
(viii) Max.Pump Output : 75mL/min
52
Orthodontics
Lab Micromotor—4 Nos.
Lab micromotor with heavy duty hand piece
401
15th SEPT. 2015]
STORES PURCHASE
1152
(5)
\º¿ kn2˛3974/2015/Un.kn.‰n.
2015 BKÃv 18.
Xncp-h-\-¥-]pcw Kh¨sa‚ v Z¥¬ tImtf-Pn¬ 2015-˛16 h¿jw Hm¿tØm-tUm-≠nIvkv hIp-∏n¬
hmIzw tamƒUnwKv/{]j¿ hnX-cWw sNøp-∂-Xn-\v \n›nX t^md-Øn¬ a’-c-kz-`m-h-Øn-ep≈ Z¿Lm-kp-Iƒ £Wn-®p
-sIm-≈p-∂p. Xm¬∏cyap≈ sS≠d¿am¿ sSIv\n-°¬ _nUpw ^n\m≥jy¬ _nUpw {]tXyIw Ih-dp-I-fn¬ ap{ZWw sNbvXv
ka¿∏n-t°-≠-Xm-Wv. sSIv\n-°¬ _nUv Dƒs°m-≈n® Ih-dn\p]pdØv “sS≠¿ \º¿ 18/2015˛sSIv\n-°¬ _nUv” F∂pw
^n\m≥jy¬ _nUv Dƒs°m-≈p∂Ih-dn\p]pdØv “sS≠¿ \º¿ 18/2015˛^n\m≥jy¬ _nUv” F∂pw Fgp-Xn-tN¿t°-≠-Xm-Wv.
sSIv\n-°¬ _nUns‚bpw ^n\m≥jy¬ _nUns‚bpw Ih-dp-I-ƒ Hcp -I-h-dn-em°n Ih-dn\p]pdØv “sS≠¿
\º¿ 18/2015 I¨k¿th-‰ohv hIp-∏nte°v ^m‚w slUv bqWn‰v hnX-cWw sNøp-∂-Xn-\pth≠n” F∂v tcJ-s∏-SpØn
“Zn {]n≥kn-∏mƒ, Kh¨sa‚ v Z¥¬ tImtf-Pv, Xncp-h-\-¥-]p-cw, ]n≥-˛695 011” F∂ta¬hn-em-k-Øn¬ FØn®pXtc-≠-Xm-Wv.
Z¿Lmkv \º¿—18/2015.
Z¿Lmkv t^md-Øns‚ hne:
A ¬—` 700.
]I¿∏v—` 350.
Z¿LmkpIƒ e`n-°p-∂-Xn-\p≈ Ah-km\ XobXn 5˛10˛2015, 2 aWn BWv. Xma-kn®v e`n-°p∂ Z¿Lm-kp-Iƒ
kzoI-cn-°p-∂-X-√. sSIv\n-°¬ _nUv 5˛10˛2015˛\v 3 aWn°v Z¿Lmkv \¬In-b-h-cpsStbm Ah-cpsS AwKo-IrX
{]Xn-\n-[n-I-fp-sStbm km∂n-≤y-Øn¬ Xpd-°p-∂-Xm-Wv.
Z¿Lmkv ka¿∏n-°m≥ B{K-ln-°p-∂-h¿ {]n≥kn-∏mƒ, Kh¨sa‚ v Z¥¬ tIm-tf-Pv, Xncp-h-\-¥-]p-cw˛11
]n≥-˛695 011˛t\mSv At]-£n-t°-≠Xpw \n›nX sS≠¿ t^mdw hmtß-≠-Xp-am-Wv. sS≠¿ t^md-Øn-\m-bp≈
At]-£tbm-sSm∏w apI-fn¬ kqNn-∏n-®n-cn-°p∂ \nc-°n¬ Hcp t^md-Øns‚ \n›nX hne HSp-t°-≠Xpw AXv Hcp
Imc-W-h-imepw XncnsI \¬Ip-∂-Xp-a-√. Z¿Lmkv t^md-߃ ssIam‰w sNø-s∏-Sm-hp-∂-X-√. Z¿Lmkv
t^md-Øns‚ hn¬∏\ 3˛10˛2015˛\v 3 aWn-hsc Bbn-cn-°pw. Z¿Lmkv t^md-Øns‚ hne-bmbn sN°p-I-tfm t]mtÃPv
Ãmºp-Itfm kzoI-cn-°p-∂-X-√. Z¿Lmkv t^mdw hn.]n.]n. Bbn Ab-bv°p-∂-X-√. Z¿Lmkv t^md-Øns‚ ]I¿∏v
Hmtcm-∂n-s‚bpw hne apI-fn¬ kqNn-∏n-®n-cn-°p-∂-Xm-bn-cn-°pw. X]m-en¬ Z¿Lmkv t^mdw thW-sa-∂p-≈-h¿ Z¿Lmkv
t^md-Øns‚ hne-tbm-sSm∏w ` 50 A[nIw t]mì sNe-hn-te-°mbn aWn-tbm¿U¿ aptJ\ ka¿∏n-t°≠-Xm-Wv.
aWn-tbm¿U¿ e`n-t°≠ Ah-km\ XobXn 22˛9-˛2015˛\v 3 aWn-hsc Bbn-cn-°pw.
No. C2/3974/2015/DCT.
18th August 2015.
Sealed competitive tenders in the prescribed forms are invited for the supply of Vaccum Moulding/Pressure required
for Orthodontics Departments of Government Dental College, Thiruvananthapuram for the year 2015-16. Interested
tenderers may submit separate “Technical bid” in one envelope superscribing “Tender No. 18/2015-Technical bid” and
separate “Financial bid” in another cover superscribing “Tender No.18/2015-Financial Bid” and should be addressed to the
‘Principal, Government Dental College, Thiruvananthapuram, Kerala State’. Both covers should be inserted in one
cover duly sealed and should be addressed to the Principal, Government Dental College, Thiruvananthapuram, Pin-695 011,
Kerala State, superscribing ‘Tender No. 18/2015 for the supply of Vaccum Moulding/Pressure for Orthodontics
Department’’.
Tender No.—18/2015.
Cost of tender form:
Original—` 700.
Duplicate—` 350.
Last date of receipt of tenders will be 5-10-2015 at 2 p. m. Late tenders will not be accepted. The Technical bid will
be opened at 3 p. m. on 5-10-2015 in the presence of such of the tenderers or their authorized representatives, who may
be present at that time. The Financial bid will be opened after the date of opening of Technical bid under intimation to
the tenderers whose Technical bid found to be acceptable and that the date of opening of Financial bid will be intimated
through e-mail, by fax and by telephone. No communication will be sent to tenderers whose Technical bid seemed to be
not acceptable.
Intending tenderers may, on application to the Principal, Government Dental College, Thiruvananthapuram-11
Pin-695 011, Kerala, obtain requisite tender forms on which tenders should be submitted. Application for the tender form
should be accompanied by a cash remittance shown above, which is the price fixed for a form and which is not
refundable at any circumstances. The tender forms are not transferable. Sale of tender forms will be closed at 3 p. m. on
3-10-2015. Cheques, Postage Stamps etc. will not be accepted towards the cost of forms, nor will the forms be sent by
VPP. Duplicate tender forms, if required, will be issued by a cash remittance shown above, per copy, Tender forms will be
sent, if required, by post on payment of an additional amount of ` 50 as postage charge in the form of money order.
Last date of receipt of money order is 22-9-2015 at 3 p. m. The specifications and tender schedule attached to the tender
notice will forms part of this tender notice.
402
15th SEPT. 2015]
STORES PURCHASE
1153
Schedule
1.
Superscription—Tender No. 18/2015 for purchase of Vacuum Moulding/Pressure for Orthodontics department
2.
Tender form can be had from—Principal, Government Dental College, Thiruvananthapuram, Pin-695 011, Kerala,
Tel: 0471-2444092, Fax No. 2444092 [email protected]
3.
To whom tenders are to be sent—Principal, Government Dental College, Thiruvananthapuram, Pin-695 011, Kerala,
Tel: 0471-2444092, Fax No. 2444092 [email protected]
4.
The date upto which the rates to be in firm—One year from the date of submission of tender.
5.
The rate should be inclusive of S.T. and other taxes, duties, levies, insurance, freight charges, packing and
forwarding charges etc. and free delivery at concerned Department/Section/Office.
6.
Tenders to be submitted in details with illustrated pamphlet (Wherever necessary) neatly typed, written manuscripts
should be avoided.
7.
All offers to the tender should be accompanied with the formal agreement executed in ` 500 Kerala Stamp Paper
contemplated in Annexure 2 Store Purchase Mannual 2013, Kerala, together with the required sum of Earnest Money
Deposit (One percent of the total cost of articles strictly tendered which can be remitted by way of Crossed Demand
Draft only favouring the following.)
“ PRINCIPAL, GOVERNMENT DENTAL COLLEGE, THIRUVANANTHAPURAM ”
8.
Advance payment conditions will not be considered.
9.
Tender forms are neither transferable nor the cost refundable under any circumstances.
10.
Sample should be produced and demonstration done as and when requested.
11.
For each item the upper limit of No. of offers/rate is restricted to 2 (two) and the 2nd offer/rate for an item must be
substantiated with sufficient EMD, if second offer is not accompanied with sufficient EMD that will not be
considered for selection. Tenders quoting more than 2 offers/ rate for an item will not be considered for selection.
12.
Soft copy of tender rate and specification in Microsoft Excel should be furnished along with original tender in the
following format.
Sl. No.
Item
Specification
Unit
Rate
13.
Brand name/make of item should be clearly mentioned.
14.
Tenders with insufficient EMD will not be considered for selection.
15.
Belated tenders will not be considered under any circumstances.
16.
Tenders unsealed, unsigned on all pages and appropriate spaces or submitted without superscription will be
rejected.
17.
Distributor/supplier should produce authorization from the manufacturer in their official stationery.
18.
Negotiation will be made only with the firm offering lowest price whose specification conforms to the requirements
in the tender notification and tender schedule.
19.
If complaints are reported the supplier should take back the item at their cost and risk.
20.
The undersigned reserves the right to reject any tender wholly or partially without any prior information to the
tenderers.
21.
The rate should be quoted in Indian currency and payment will be made only in Indian currency.
22.
The only jurisdiction of any dispute regarding the purchase will be at Thiruvananthapuram.
23.
The photocopies of the documents produced along with tender should be attested by a Gazetted Officer.
24.
If the date scheduled for opening of tender is declared as holiday, tenders will be opened on the next working day
at the same time, same place.
25.
Tenders should bear the signature/seal and full Postal address, Fax No., Telephone No. and Mobile Phone No. of
the tenderer wherever necessary.
26.
Tenders will be opened in the presence of such of the tenderers or their authorized representatives who may be
present at time and they should have valid autherization letter.
27.
Compliance statements of each of the specification should be furnished, clearly.
28.
Warranty condition should be stated.
29.
Offer of AMC/CAMC should be specifically mentioned.
30.
The conditions prescribed in the schedule and detailed specification of equipment will forms part of tender notice.
15th SEPT. 2015]
STORES PURCHASE
1154
Specification of Vacuum Moulding/Pressure
Sl. No. 50
Tender No.—18/2015.
(i)
Dental pressure moulding unit-imported, with thermally controlled infra red heater, display with programmed heating
and cooling time, 230V A/c, pressure 0.5-6.0 bar 450 x 230 x 260 size (LxWxH), weight 16 kg.
Model A. BIOSTAR
Model B. MINISTAR
Model C. BIOSTAR
With starter kit materials
Model D. MINISTAR
With starter kit materials
(ii) No. Required—1 (One)
Govt. Dental College,
(Sd.)
Thiruvananthapuram.
For Principal.
.
Z¿Lmkv ]ckyw
\º¿ Fkv1/9789/2015.
2015 BKÃv 3.
tImgn-t°mSv saUn-°¬ tImtfPv Bip-]-{Xn-bnte°v
Xmsg ]d-bp-∂h kssπ sNøp-∂-Xn\v \n›nX
t^md-Øn¬ ko¬ sNbvX sS≠-dp-Iƒ £Wn-®p-
sIm-≈p-∂p.
C\hnhcw—C. kn. Pn. t]∏¿—3000 tdmƒkv
(80mm × 20mm Chemical coated) (Machine Model—Eden
SE3 and Machine Model Mindray Beneheart R3)
AS-¶¬ XpI—` 1,05,000.
sS≠¿ Abbv-°p∂ Ih-dn\papI-fn¬ \º¿
Fkv1/9789/2015 F∂v hy‡-ambn ImWn-®n-cn-t°-≠-Xm-Wv.
\nc-X-{Zhyw—1%.
sS≠¿ t^md-Øns‚ hne—` 458.
sS≠¿ t^md-w hn¬°p∂ Ah-km\ Xob-Xnbpw
ka-bhpw—17-˛9-˛2015, 3 aWn.
sS≠¿
Int´≠
Ah-km\
Xob-Xnbpw
ka-bhpw—18˛9˛2015, 5 aWn.
sS≠¿ Xpd°p∂ Xob-Xnbpw ka-bhpw—19˛-9˛2015,
D®bv°v 12 aWn.
sS≠dn¬ ]d-bp∂ \nc-°p-Iƒ {]m_-ey-Øn-en-cn-t°≠
Ah-km\ Xob-Xn—31˛1-˛2016.
sS≠¿ t^mdw In´p-∂-Xn\pw ]qcn-∏n®v Ab-bvt°-≠-Xp-amb
hnemkw—kq{]-≠v, saUn-°¬ tImtfPv Bip-]-{Xn,
tImgn-t°m-Sv.
No. S1/9789/2015.
3rd August 2015.
Sealed tenders in the prescribed form are invited for
the supply of the following items to Medical College
Hospital, Kozhikode.
Name of Item—ECG Paper—3000 Rolls (80mm × 20mm
Chemical coated) (Machine Model—Eden SE3 and
Machine Model Mindray Beneheart R3).
Tender Cost— ` 1,05,000.
Superscription Tender No. should be specifically
noted as S1/9789/2015.
EMD—1%.
Price of tender (in duplicate) ST Cash only/Money
Order— ` 458.
Date and time of close of sale of tender forms—
17-9-2015, 3 p.m.
Date
and
time
for
receipt
of
tender—
18-9-2015, 5 p. m.
Date and time for opening of tender—19-9-2015,
12 Noon.
Date upto which rates are to be firm—31-1-2016.
Address of Officer from whom tender forms are to
be obtained and whom tenders are to be sent—
The Superintendent, Medical College Hospital, Calicut.
Medical College Hospital,
(Sd.)
Kozhikode.
Superintendent.
404
15th SEPT. 2015]
STORES PURCHASE
1155
Z¿Lmkv ]ckyw
(1)
\º¿ Fkv.3˛5933/15/Fw.kn-.kn.
2015 BKkv‰v 7.
tImgn-t°mSv
saUn°¬
tImtfPnse
aƒ´n
Unkn-πn-\dn dnk¿®v bqWn‰v ]tØm-fPn hn`m-K-Øn-te°v
hnhn[ D]-I-c-W-߃ hnX-cWw sNøp-∂-Xnte°v
\n¿Ωm-Xm-°-fn¬ \nt∂m AwKo-IrX hnX-c-W-°m-cn¬
\nt∂m ap{Zh®Xpw a’-cm-[n-jvTn-X-hp-amb Z¿Lmkp-Iƒ
£Wn-®p-sIm-≈p-∂p.
{Ia
Z¿Lmkv \ºcpw
\º¿
C\hpw GI-tZi sNehpw
1
Fkv 3/5933/15/Fw.kn-.kn.—CeIvt{Smt^m-dn-knkv-
A∏m-c‰kv—-` 4,52,948.
2
Fkv 3/5933(4)/15/Fw.kn-.kn.—hm´¿_mØv—
-` 2,05,483.
3
Fkv 3/5933(17)/15/Fw.kn-.kn.—Ce-Ivt{Sm-WnIv
]n∏‰v—-` 2,00,000.
Z¿Lmkv t^md-Øns‚ hne:
A ¬—{Ia\º¿ 1-˛\v ` 950, {Ia\º¿ 2, 3 Chbv°v
` 420.
]I¿∏v—{Ia\º¿ 1-˛\v ` 475, {Ia\º¿ 2, 3 Chbv°v
` 210.
X]m¬ hgn-—{Ia\º¿ 1-˛\v ` 1,000, {Ia\º¿ 2, 3
Chbv°v ` 470.
X]m¬ hgn Z¿Lmkv t^mdw hn¬°p∂ Ahkm\
XobXnbpw kabhpw—18˛9˛2015, 3 aWn.
Z¿Lmkv t^mdw hn¬°p∂ Ahkm\ XobXnbpw
kabhpw—23˛9˛2015, 3.30 aWn.
Z¿Lmkv t^mdw e`n-t°≠ XobXnbpw kabhpw—
25˛9˛2015, 11 aWn.
Z¿Lmkv Xpd°p∂ XobXnbpw kabhpw—25˛9˛2015,
11.30 aWn.
Z¿Lmkv \nP-ambncn°p∂ XobXn—31˛3˛2016.
Z¿Lmkv t^mdhpw hni-Zmw-i-ßfpw saUn-°¬
tImtfPv Hm^o-kn¬ \n∂v {]hrØn ka-bØv e`y-am-Wv.
(0495-˛2350212) ` 200˛s‚ tIcf ap{Z-]-{X-Øn¬ \nivNnX
amXr-I-bn-ep≈ kΩX]{Xhpw hmKvZØ XpI-bpsS
1 iX-am\w \nc-X-{Z-hy-tØmSpw IqSn Xmsg \¬In-bn-cn-°p∂
tase-gp-Øp-ambn Z¿Lmkv ka¿∏nt°-≠-Xm-Wv. kwÿm-\-
Øn\v ]pd-Øp≈ ÿm]-\-߃°v ap{Z]{Xw e`n-°p-∂-Xn\v
` 250 aWn-Hm¿U-¿ klnXw {]n≥kn-∏mƒ, Kh. saUn-°¬
tImtf-Pv, tImgn-t°m-Sv- F∂ hnem-k-Øn¬ At]-£n-t°-≠-
Xm-Wv. \nc-X-{Zhy kΩ-X-]-{X-Øns‚ amXrI Z¿Lmkv
t^md-Øn¬ A\p_‘ambn tN¿Øn-´p-≠v.
hne C¥y≥ cq]-bn¬ tcJ-s∏-Sp-Øn-bn-cn-t°-≠-Xm-Wv.
\nIp-Xn-Ifpw a‰pw shtΔsd ]cm-a¿in-t°-≠-Xm-Wv. IS-Øv,
C≥jz-d≥kv, Ib-‰n-d-°v, b{¥-km-a-{Kn-Iƒ ÿm]n-°¬,
IΩo-j≥ F∂o sNe-hp-Iƒ Z¿Lm-kp-Im-¿ kzbw
hln-t°-≠-Xm-Wv. XpI \¬Ip-∂Xv C¥y≥ cq]-bn¬
Bbn-cn-°pw.
sshIn e`n-°p-∂Xpw aXn-bmb \nc-X-{Z-hyw,
kΩ-X-]-{Xw, a‰v Z¿Lmkv hyh-ÿ-Iƒ F∂nh
]men-°m-Ø-Xp-amb Z¿Lm-kp-Iƒ as‰mcp Adn-bn∏pw
IqSmsX Xs∂ \nc-kn-°p-∂-Xm-Wv. Z¿Lmkv t^mdw
ssIam‰w sNøm≥ ]mSp-≈-X-√. Z¿Lmkv t^md-Øns‚
hne-bmbn aWn Hm¿U¿ HgnsI as‰m∂pw kzoI-cn-°p-∂-X-√.
Z¿Lmkv t^md-Øns‚ Uyqπn-t°‰v hne \¬In hmßm-hp-
∂-Xm-Wv. Z¿Lm-kp-Iƒ apI-fn¬ kqNn-∏n-®n-cn-°p-∂-Xv
-{]-Imcw Z¿Lm-kp-Im-c-s‚tbm AwKoIrX {]Xn-\n-[n-bp-sStbm
km∂n-≤y-Øn¬ Xpd-°p-∂-Xm-Wv.
\n_-‘-\-Iƒ
1.
\n¿Ωm-Xm-hn¬ \n∂p≈ ssI]p-kvXIw (X-\-Xv)
Z¿Lm-kn-s\m∏w ka¿∏n-t°-≠-Xm-Wv.
2.
Bh-iy-s∏-Sp∂ ]£w Z¿Lm-kp-Im-c≥ kz¥w
sNe-hn¬ km[\ kma-{Kn-Iƒ ]cn-tim-[-\bv°v
hnt[-b-am-t°-≠-Xm-Wv.
3.
hmd≠n Npcp-ßn-bXv 2 h¿jw.
4.
hm¿jnI
A‰-Ip-‰-∏Wn/ka{K
hm¿jnI
A‰-Ip-‰-∏Wn (Np-cp-ßn-bXv 5 h¿jw) \nc-°p-Iƒ
shtΔsd kqNn-∏n-®n-cn-t°-≠-Xm-Wv. Bh-iy-sa-¶n¬
km[\ kma-{Kn-I-fpsS sXc-s™-Sp-∏n\v Cu
\nc-°p-Iƒ ]cn-K-Wn-t°≠Xm-Wv.
5.
ap≥Iq¿ XpI \¬Ip∂-X√.
No. S3/5933/2015/MCC.
7th August 2015.
Sealed and competitive tenders in the prescribed form
are invited from the manufacturers/authorized dealers for
the supply of Various Equipment for Multi Disciplinary
Research Unit, Pathology Department, Govt. Medical
College, Kozhikode. Tender forms and details can be
obtained from the office of the Principal, Government
Medical College, Kozhikode on payment of tender cost.
Tender should be superscribed with tender number and
addressed to the Principal, Government Medical College,
Kozhikode. Belated tenders will not be accepted. Each
tender should be submitted along with an agreement
signed and executed in Kerala Stamp Paper worth ` 200
and Earnest Money Deposit @ 1% of the total cost of
items tendered for Stamp paper will be supplied to the firm
outside Kerala on request along with remittance of ` 250
by Money Order in favour of Principal, Govt. Medical
College, Kozhikode. Specimen copy of the agreement is
annexed with the tender form. Rates should be quoted in
Indian Rupees only. All the taxes applicable is to be
clearly mentioned. Freight, Insurance, loading, unloading,
erection and commission charges and installation should
be borne by the tenderer, Payment also will be made in
Indian Rupees.
405
15th SEPT. 2015]
STORES PURCHASE
1156
Sl.
Tender Number
No.
Name of the Item and
Approximate Cost
1
S3/5933/15/MCC—Electrophoresis apparatus—
` 4,52,948
2
S3/5933(4)/15/MCC—Water Bath —` 2,05,483
3
S3/5933/(17)/15/MCC—Electronic Pipette—
` 2,00,000
Cost of tender form:
Original—` 950 for Sl. No. 1, ` 420 for
Sl. Nos. 2 and 3.
Duplicate—` 475 for Sl. No. 1, ` 210 for
Sl. Nos. 2 and 3.
By post—` 1,000 for Sl. No. 1, ` 470 for
Sl. Nos. 2 and 3.
Closing date and time of of tender by post —
18-9-2015, 3 p. m.
Closing date and time of sale of tender—23-9-2015.
3.30 p.m.
Due date and time for receipt of tender—25-9-2015,
11 a. m.
Due date and time for opening of tender—25-9-2015,
11.30 a. m.
Date upto which rates are to be firm—31-3-2016.
The tender without required earnest money deposit,
agreement and not satisfying other tender conditions are
liable to be rejected without further notice. Tender form is
not transferable. Cheque, Draft, Postage stamps etc., will
not be accepted towards the cost of tender forms.
Duplicate copy of tender form can be obtained on
payment of cost. The tender will be opened in
the presence of the tenderers or their authorized
representatives as scheduled.
SPECIAL CONDITIONS
1. The brochure issued by the manufacturer in original
should be attached.
2. The firm should be arranged demonstration at his
own cost, if requested.
3. Warranty: Minimum 2 years.
4. AMC and CAMC : Minimum 5 years. AMC and
CAMC rate (to be mentioned separately) will be
considered for selection if necessary.
5. No advance payment will be made.
(2)
\º¿ Fkv.1˛3650/15/Fw.kn-.kn.
2015 BKkv‰v 10.
tImgn-t°mSv saUn°¬ tImtfPnse hnhn[
hIp-∏p-I-fn-te°v D]-I-c-W-߃ hnX-cWw sNøp-∂-Xnte°v
\n¿Ωm-Xm-°-fn¬ \nt∂m AwKo-IrX hnX-c-W°m-cn¬
\nt∂m ap{Zh®Xpw a’-cm-[n-jvTn-X-hp-amb Z¿Lmkp-Iƒ
£Wn-®p-sIm-≈p-∂p.
{Ia
Z¿Lmkv \ºcpw C\hpw
\º¿
Un∏m¿´p-sa‚pw GI-tZi sNehpw
1
Fkv.1/13559/15/Fw.kn-.kn.—s]bn≥ekv slb¿ dnaqh¬
sajo≥ (1 FÆw)—sU¿sa-t‰m-fPn—-` 4 e£w
2
Fkv.1/13560/15/Fw.kn-.kn.—tkmtWm-ssk‰v
en\n-b¿ hmkvIp-em¿ t{]m_v (1 FÆw) Fa¿P≥kn
saUn-kn≥—` 2,00,000
3
F kv . 1 / 1 3 5 6 1 / 1 5 / F w . k n - . k n . — a ƒ ´n-]mc
tamWn-‰¿ (5 FÆw) P\-d¬ saUn-kn≥—` 5 e£w
4
Fkv.1/13563/15/Fw.kn-.kn.—]h¿{Un¬ B‚ v
doa¿ (1 FÆw)—Hm¿tØm-]o-UnIvkv—` 5 e£w
5
Fkv.1 /1356 4/15/Fw.kn-.kn.— tImƒUv sse‰v
tkmgvkv F¬. C. Un. hnØv tI_nƒ—C . F≥.Sn.-
h-Ip∏v—` 4 e£w
Z¿Lmkv t^md-Øns‚ hne:
A ¬—{Ia\º¿ 1, 5 Chbv°v ` 840, {Ia\º¿
2˛\v ` 420, {Ia\º¿ 3, 4 Chbv°v ` 1,050.
]I¿∏v—{Ia\º¿ 1, 5 Chbv°v ` 420, {Ia\º¿
2˛\v ` 210, {Ia\º¿ 3, 4 Chbv°v ` 525.
X]m¬ hgn-—{Ia\º¿ 1, 5 Chbv°v ` 870,
{Ia\º¿ 2˛\v ` 470, {Ia\º¿ 3, 4 Chbv°v
` 1,100.
X]m¬ hgn Z¿Lmkv t^mdw hn¬°p∂ Ahkm\
XobXnbpw kabhpw—1˛10˛2015, 3 aWn.
Z¿Lmkv t^mdw hn¬°p∂ Ahkm\ XobXnbpw
kabhpw—8˛10˛2015, 3.30 aWn.
Z¿Lmkv e`n-t°≠ XobXnbpw kabhpw—9˛10˛2015,
11 aWn.
Z¿Lmkv Xpd°p∂ XobXnbpw kabhpw—9˛10˛2015,
11.30 aWn.
Z¿Lmkv \nP-ambncn°p∂ XobXn—31˛3˛2016.
Z¿Lmkv t^md-hpw hni-Zmw-i-ßfpw saUn-°¬ tImtfPv
{]n≥-kn-∏m-fns‚ Hm^o-kn¬ \n∂v {]hrØn ka-bØv
e`y-am-Wv. (0495-˛2350212) ` 200 hne-°p≈ tIcf
ap{Z-]-{X-Øn¬ \nivNnX amXr-I-bn-ep≈ kΩX ]{Xhpw
hmKvZØ XpI-bpsS 1 iX-am\w \nc-X-{Z-hy-tØmSpw IqSn
Xmsg \¬In-bn-cn-°p∂ tase-gp-Øp-ambn Z¿Lmkv
ka¿∏nt°-≠-Xm-Wv. kwÿm-\-Øn\v ]pd-Øp≈ ÿm]-\-
߃°v ap{Z]{Xw e`n-°p-∂-Xn\v ` 250- aWtbm¿U-¿
klnXw {]n≥kn-∏mƒ, Kh. saUn-°¬ tImtf-Pv,
tImgn-t°m-Sv-˛8 F∂ hnem-k-Øn¬ At]-£n-t°-≠-Xm-Wv.
\nc-X-{Zhy kΩ-X-]-{X-Øns‚ amXrI Z¿Lmkv
t^md-Øn¬ A\p_‘ambn tN¿Øn-´p-≠v.
406
15th SEPT. 2015]
STORES PURCHASE
1157
hne C¥y≥ cq]-bn¬ tcJ-s∏-Sp-Øn-bn-cn-t°-≠-Xm-Wv.
\nIp-Xn-Ifpw a‰pw shtΔsd ]cm-a¿in-t°-≠-Xm-Wv. IS-Øv,
C≥jz-d≥kv, Ib-‰n-d-°v, b{¥-km-a-{Kn-Iƒ ÿm]n-°¬,
IΩo-j≥ F∂o sNe-hp-Iƒ Z¿Lm-kp-Im-c≥ kzbw
hln-t°-≠-Xm-Wv. XpI \¬Ip-∂Xv C¥y≥ cq]-bn¬
Bbn-cn-°pw.
sshIn e`n-°p-∂Xpw aXn-bmb \nc-X-{Z-hyw,
kΩ-X-]-{Xw, a‰v Z¿Lmkv hyh-ÿ-Iƒ F∂nh
]men-°m-Ø-Xp-amb Z¿Lm-kp-Iƒ as‰mcp Adn-bn∏pw
IqSmsX Xs∂ \nc-kn-°p-∂-Xm-Wv. Z¿Lmkv t^mdw
ssIam‰w sNøm≥ ]mSp-≈-X-√. Z¿Lmkv t^md-Øns‚
hne-bmbn aWn Hm¿U¿ HgnsI as‰m∂pw kzoI-cn-°p-∂-X-√.
Z¿Lmkv t^md-Øns‚ Uyqπn-t°‰v hne \¬In hmßm-hp-
∂-Xm-Wv. Z¿Lm-kp-Iƒ apI-fn¬ kqNn-∏n-®n-cn-°p-∂-Xv
-{]-Imcw Z¿Lm-kp-Im-c-s‚tbm AwKoIrX {]Xn-\n-[n-bp-sStbm
km∂n-≤y-Øn¬ Xpd-°p-∂-Xm-Wv.
\n_-‘-\-Iƒ
1.
\n¿Ωm-Xm-hn¬ \n∂p≈ ssI]p-kvXIw (X-\-Xv)
Z¿Lm-kn-s\m∏w ka¿∏n-t°-≠-Xm-Wv.
2.
Bh-iy-s∏-Sp∂]£w Z¿Lm-kp-Im-c≥ kz¥w
sNe-hn¬ km[\ kma-{Kn-Iƒ ]cn-tim-[-\bv°v
hnt[-b-am-t°-≠-Xm-Wv.
3.
hmd≠n Npcp-ßn-bXv 2 h¿jw.
4.
hm¿jnI A‰-Ip-‰-∏Wn, ka{K hm¿jnI A‰-Ip-‰-∏Wn
(Np-cp-ßn-bXv 5 h¿jw) \nc-°p-Iƒ shtΔsd
kqNn-∏n-®n-cn-t°-≠-Xm-Wv. Bh-iy-sa-¶n¬ km[\
kma-{Kn-I-fpsS sXc-s™-Sp-∏n\v Cu \nc-°p-Iƒ
]cn-K-Wn-°p∂Xm-Wv.
5.
ap≥Iq¿ XpI \¬Ip∂-X√.
No. S1/3650/2015/MCC.
10th August 2015.
Sealed and competitive tenders in the prescribed form
are invited from the manufacturers/authorized Dealers for
the supply of Equipments to the Various Department of
Govt. Medical College, Kozhikode. Tender forms and
details can be obtained from the office of the Principal,
Medical College, Kozhikode on payment of tender cost.
Tender should be superscribed with tender number and
addressed to the Principal, Government Medical College,
Kozhikode. Belated tenders will not be accepted. Each
tender should be submitted along with an agreement
signed and executed in Kerala Stamp Paper worth ` 200
and Earnest Money Deposit @ 1 % of the total cost of
items tendered for. Stamp paper will be supplied to the
firm outside Kerala, on request along with remittance of
` 250 by Money Order in favour of Principal, Govt.
Medical College, Kozhikode. Specimen copy of the
agreement is annexed with the tender form. Rates should
be quoted in Indian Rupees only. All the taxes applicable
is to be clearly mentioned. Freight, Insurance, loading,
unloading, erection and commission charges and
installation should be borne by the tenderer. Payment
also will be made in Indian Rupees.
Sl.
Tender Number, Name of the Items,
No.
Department and Approximate Cost
1
S1/13559/15/MCC—Painless Hair Removal
Machine (1 No.) Dermatology—` 4,00,000
2
S1/13560/15/MCC—Sonosite Linear Vascular
Probe— (1 No.) Emergency Medicine—
` 2,00,000
3
S1/13561/15/MCC—Multipara Monitor
(5 Nos.) General Medicine—` 5,00,000
4
S1/13563/15/MCC—Power Drill & Reamer
(1 No.) Orthopaedics—` 5,00,000
5
S1/13564/15/MCC—Cold Light Source LED with
Cable (1 No.)E. N. T.—` 4,00,000
Cost of tender form:
Original—` 840 for Sl. Nos. 1 and 5, ` 420 for
Sl. No. 2, ` 1,050 for Sl. Nos. 3 and 4.
Duplicate—` 420 for Sl. Nos. 1 and 5, ` 210 for
Sl. No. 2, ` 525 for Sl. Nos. 3 and 4.
By post—` 870 for Sl. Nos. 1 and 5, ` 470 for
Sl. No. 2, ` 1,100 for Sl. Nos. 3 and 4.
Closing date and time of tender by post —1-10-2015,
3 p. m.
Closing date and time of sale of tender form—
8-10-2015, 3.30 p.m.
Due date and time for receipt of tender—9-10-2015,
11 a. m.
Due date and time for opening of tender— 9-10-2015,
11.30 a. m.
Date upto which rates are to be firm—31-3-2016.
The tender without the required earnest money
deposit, agreement and not satisfying other tender
conditions are liable to be rejected without further notice.
Tender form is not transferable. Cheque, Draft, Postage
stamps etc., will not be accepted towards the cost of
tender forms. Duplicate copy of tender form can be
obtained on payment of cost. The tender will be opened
in the presence of the tenderers or their authorized
representatives as scheduled.
SPECIAL CONDITIONS
1. The brochure issued by the manufacturer in original
should be attached.
2. The firm should be arranged demonstration at his
own cost, if requested.
3. Warranty: Minimum 2 years.
4. AMC and CAMC : Minimum 5 years. AMC and
CAMC (rate to be mentioned separately) will be
considered for selection if necessary.
5. No advance payment will be made.
15th SEPT. 2015]
STORES PURCHASE
1158
(3)
\º¿ Fkv5˛12952/2015/Fw.kn-.kn.
2015 BKkv‰v 13.
tImgn-t°mSv saUn°¬ tImtfPnse P\-d¬ k¿P-dn,
saUn-kn≥ hn`m-K-Øn-te°v k¿Pn-°¬ Ubm-sX¿an,
C≥^yq-j≥ ]ºv thmeypsa{SnIv F∂nh hnX-cWw
sNøp-∂-Xnte°v \n¿Ωm-Xm-°-fn¬ \nt∂m Ah-cpsS
AwKo-IrX hnX-c-W-°m-cn¬ \nt∂m ap{Zh®Xpw
a’-cm-[n-jvTn-X-hp-amb Z¿Lmkp-Iƒ £Wn-®p-sIm-≈p-∂p.
{Ia
Z¿Lmkv \ºcpw C\hpw
\º¿
Un∏m¿´p-sa‚pw GI-tZi sNehpw
1
Fkv 5/12951/15/Fw.kn-.kn.—k¿Pn-°¬ Ubm-sX¿an
(1 FÆw)—P\-d¬ k¿Pdn-—` 2,50,000.
2
Fkv 5/12956/15/Fw.kn-.kn.—C≥^yq-j≥ ]ºv
thmeyp-sa-{Sn°v—(5 FÆw)—saUn-kn≥-—` 3,50,000.
Z¿Lmkv t^md-Øns‚ hne:
A ¬—{Ia\º¿ 1-˛\v ` 525, {Ia\º¿ 2˛\v ` 735.
]I¿∏v—{Ia\º¿ 1-˛\v ` 260, {Ia\º¿ 2˛\v ` 370.
X]m¬ hgn-—{Ia\º¿ 1-˛\v ` 575, {Ia\º¿
2˛\v ` 785.
X]m¬ hgn Z¿Lmkv t^mdw hn¬°p∂ Ahkm\
XobXn—22˛9˛2015.
Z¿Lmkv t^mdw hn¬°p∂ Ahkm\ XobXnbpw
kabhpw—29˛9˛2015, 3 aWn.
Z¿Lmkv t^mdw kzoI-cn-°p∂ Ahkm\ XobXnbpw
kabhpw—30˛9˛2015, 11 aWn.
Z¿Lmkv Xpd°p∂ XobXnbpw kabhpw—30˛9˛2015,
11.30 aWn.
hne \nP-ambncn°p∂ Ahkm\ XobXn—31˛3˛2016.
Z¿Lmkv t^md-hpw hni-Zmw-i-ßfpw saUn-°¬ tImtfPv
Hm^o-kn¬ \n∂v {]hrØn ka-bØv e`y-am-Wv.
(0495-˛2350212) ` 200 hne-°p≈ tIcf ap{Z-]-{X-Øn¬
\nivNnX amXr-I-bn-ep≈ kΩX]{Xhpw hmKvZØ
XpI-bpsS 1 iX-am\w \nc-X-{Z-hy-tØmSpw IqSn Xmsg
\¬In-bn-cn-°p∂ tase-gp-Øp-ambn Z¿Lmkv ka¿∏n
t°-≠-Xm-Wv. kwÿm-\-Øn\v ]pd-Øp≈ ÿm]-\-߃°v
ap{Z]{Xw e`n-°p-∂-Xn\v ` 250-˛s‚ aWn-Hm¿U-¿ klnXw
{]n≥kn-∏mƒ, Kh. saUn-°¬ tImtf-Pv, tImgn-t°m-Sv- F∂
hnem-k-Øn¬ At]-£n-t°-≠-Xm-Wv. \nc-X-{Zhy kΩ-X-]-{X-
Øns‚ amXrI Z¿Lmkv t^md-Øn¬ A\p_‘ambn
tN¿Øn-´p-≠v.
hne C¥y≥ cq]-bn¬ tcJ-s∏-Sp-Øn-bn-cn-t°-≠-Xm-Wv.
\nIp-Xn-Ifpw a‰pw shtΔsd ]cm-a¿in-t°-≠-Xm-Wv. IS-Øv,
C≥jz-d≥kv, Ib-‰n-d-°v, b{¥-km-a-{Kn-Iƒ ÿm]n-°¬,
IΩo-j≥ F∂o sNe-hp-Iƒ Z¿Lm-kp-Im-c≥ kzbw
hln-t°-≠-Xm-Wv. XpI \¬Ip-∂Xv C¥y≥ cq]-bn¬
Bbn-cn-°pw.
sshIn e`n-°p-∂Xpw aXn-bmb \nc-X-{Z-hyw,
kΩ-X-]-{Xw, a‰v Z¿Lmkv hyh-ÿ-Iƒ F∂nh
]men-°m-Ø-Xp-amb Z¿Lm-kp-Iƒ as‰mcp Adn-bn∏pw IqSmsX
Xs∂ \nc-kn-°p-∂-Xm-Wv. Z¿Lmkv t^mdw ssIam‰w
sNøm≥ ]mSp-≈-X-√. Z¿Lmkv t^md-Øns‚ hne-bmbn
aWntbm¿U¿ HgnsI as‰m∂pw kzoI-cn-°p-∂-X-√. Z¿Lmkv
t^md-Øns‚ Uyqπn-t°‰v hne \¬In hmßm-hp-∂-Xm-Wv.
Z¿Lm-kp-Iƒ apI-fn¬ kqNn-∏n-®n-cn-°p-∂-Xv -{]-Imcw
Z¿Lm-kp-Im-c-s‚tbm AwKoIrX {]Xn-\n-[n-bp-sStbm
km∂n-≤y-Øn¬ Xpd-°p-∂-Xm-Wv.
\n_-‘-\-Iƒ
1.
\n¿Ωm-Xm-hn¬ \n∂p≈ ssI]p-kvXIw (X-\-Xv)
Z¿Lm-kn-s\m∏w ka¿∏n-t°-≠-Xm-Wv.
2.
Bh-iy-s∏-Sp∂]£w Z¿Lm-kp-Im-c≥ kz¥w
sNe-hn¬ km[\ kma-{Kn-Iƒ ]cn-tim-[-\bv°v
hnt[-b-am-t°-≠-Xm-Wv.
3.
hmd≠n Npcp-ßn-bXv 2 h¿jw \n¿_-‘w.
4.
hm¿jnI A‰-Ip-‰-∏Wn/ka{K hm¿jnI A‰-Ip-‰-∏Wn
(Np-cp-ßn-bXv 5 h¿jw \n¿_‘w) \nc-°p-Iƒ
shtΔsd kqNn-∏n-®n-cn-t°-≠-Xm-Wv. Bh-iy-sa-¶n¬
km[\ kma-{Kn-I-fpsS sXc-s™-Sp-∏n\v Cu
\nc-°p-Iƒ ]cn-K-Wn°p∂Xm-Wv.
5.
ap≥Iq¿ XpI \¬Ip∂-X√.
No. S5/12952/2015/MCC.
13th August 2015.
Sealed and competitive tenders in the prescribed form
are invited from the manufacturers/authorized dealers for
the supply of Surgical Diathermy and Infusion Pump
Volumetric to the Department of General Surgery and
Medicine, to the Govt. Medical College, Calicut.
Sl.
Tender Number, Name of the Item
No.
Department and Approximate Cost
1
S5/12952/15/MCC—Surgical Diathermy-1 No. of
General Surgery—` 2,50,000
2
S5/12953/15/MCC—Infusion Pump Volumetric
5 Nos. of Medicine—` 3,50,000
Cost of tender form:
Original—` 525 for Sl. No. 1 and ` 735
for Sl. No. 2.
Duplicate—` 260 for Sl. No. 1 and ` 370 for
Sl. No. 2.
By post—` 575 for Sl. No. 1 and ` 785 for
Sl. No. 2.
Closing date of tender by post —22-9-2015.
Closing date and time of sale of tender form—
29-9-2015, 3 p.m.
Due date and time for receipt of tender—30-9-2015,
11 a. m.
Date and time for opening of tender—30-9-2015,
11.30 a. m.
Date upto which rates are to be firm—31-3-2016.
408
15th SEPT. 2015]
STORES PURCHASE
1159
Tender forms and details can be had from the office
of the Principal, Government Medical College, Calicut
during working hours (Phone-0495-2350212). Tender
should be superscribed with tender number as specified
below. The tender should be submitted along with an
agreement executed in Kerala Stamp Paper worth ` 200
and Earnest Money Deposit @ 1 % of quoted price.
Stamp paper will be supplied to the firm outside Kerala,
on request along with remittance of ` 250 by Money
Order taken in favour of Principal, Govt. Medical College,
Calicut. Specimen copy of the agreement is annexed with
the tender form. Rate should be quoted in Indian Rupees
only. All the taxes applicable is to be clearly mentioned.
Freight, Insurance, loading, unloading, erection and
commission charges and installation should be borne by
the tenderer. Payment also will be made in Indian Rupees.
The tender without required earnest money deposit,
agreement and not satisfying other tender conditions are
liable to be rejected without further notice. Tender form is
not transferable. Cheque, Draft, Postage stamps etc., will
not be accepted towards the cost of tender forms.
Duplicate copy of tender form can be obtained on
payment of cost. The tender will be opened in the presence
of the tenderers or their authorized representatives as
scheduled.
SPECIAL CONDITIONS
1. The brochure issued by the manufacturer in original
should be attached.
2. The firm should be arranged demonstration at his
own cost, if requested.
3. Warranty: Minimum 2 years.
4. AMC and CAMC : Minimum 5 years. AMC and
CAMC (rate to be mentioned separately) will be
considered for selection if necessary.
5. No advance payment will be made.
Office of the Govt. Medical College,
(Sd.)
Kozhikode.
Principal.
Z¿Lmkv Zo¿Ln-∏n-°¬ ]ckyw
\º¿ Fkv4/10710/2015/Fw.-kn.-kn.
2015 BKÃv 17.
tImgn-t°mSv saUn°¬ tIm-tfPnse \yqtdm-k¿Pdn
hn`m-KØn-te°v C≥^yq-j≥ ]ºv (3 FÆw) hnX-cWw
sNøp-∂-Xn-te°v \n¿Ωm-Xm-°-fn¬\nt∂m Ah-cpsS
AwKo-IrX hnX-c-W-°m-cn¬\nt∂m ap{Zh®Xpw
a’-cm-[n-jvTn-X-hp-amb Z¿Lmkp-Iƒ £Wn-®p-sIm-≈p-∂p.
AS-¶¬ XpI—` 1,95,000.
\nc-X-{Zhyw—sS≠¿ XpI-bpsS 1%.
Z¿Lmkv t^md-Øns‚ hne:
Hdn-Pn-\¬—` 420.
Uyqπn-t°‰v—` 210.
X]m¬ hgn-—` 470.
Z¿Lmkv t^map-Iƒ X]m¬ hgn hn¬∏\ Xocp∂
XobXnbpw kabhpw—9˛9˛2015, 3 aWn.
Z¿Lmkv t^map-Iƒ t\cn´v e`n-°p∂ Ahkm\
XobXnbpw kabhpw—15˛9˛2015, 3 aWn.
Z¿LmkpIƒ kzoI-cn-°p∂ Ahkm\ XobXnbpw
kabhpw—16˛9˛2015, 11 aWn.
Z¿LmkIƒ Xpd°p∂ XobXnbpw kabhpw—16˛9˛2015,
11.30 aWn.
Z¿Lm-kp-Iƒ Fkv4/10710/2015/Fw.-kn.-kn. F∂
tase-gp-tØm-Sp-IqSn t\cn´p \¬Ip-Itbm {]n≥kn-∏mƒ,
Kh. saUn-°¬ tImtf-Pv, tImgn-t°m-Sv-˛8 F∂
hnem-k-Øn¬ Ab-bv°p-Itbm sNtø-≠-Xm-Ip-∂p. sshIn
e`n-°p∂ Z¿Lm-kp-Iƒ kzoI-cn-°p-∂-X-√. Z¿Lm-kp-Iƒ
apIfn¬ kqNn-∏n-®n-cn-°p∂ Znhkw 11.30 aWn°v
Z¿Lm-kp-Imc-s‚tbm AwKo-IrX {]Xn-\n[n-bp-sS-tbm
km∂n-≤y-Øn¬ Xpd-°p∂XmWv. X]m-en¬ e`n-t°-≠
Z¿Lm-kv t^md-Øns‚ hne-bmbn aWn-tbm¿U¿ HgnsI
as‰m∂pw kzoI-cn-°p-∂-X-√.
` 200˛s‚ hne-bp≈ tIcf ap{Z-]-{X-Øn¬ \nivNnX
amXr-I-bn-ep≈ kΩX]{Xw hmKvZØ XpIbpsS
1 iX-am\w \nc-X-{Z-hy-tØmSpw IqSn Z¿Lmknt\msSm∏w
ka¿∏nt°-≠-Xm-Wv.
IqSp-X¬ hnh-c-߃ saUn-°¬ tImtf-Pns‚
B^o-kn¬\n∂pw {]h¿Øn ka-b-ß-fn¬ e`y-am-Wv.
No. S4/10710/2015/MCC.
17th August 2015.
Sealed and Competitive tenders in the prescribed
form are invited from the manufacturers or authorized
dealers for the supply of Infusion Pumps (3 Nos.) to the
Department of Neurosurgery of Govt. Medical College,
Kozhikode as detailed. Demonstration of the item is to be
done if necessary.
Estimated Cost—` 1,95,000.
E. M. D.—1% of the quoted amount.
Cost of tender form:
Original—` 420.
Duplicate—` 210.
By Post—` 470.
Last date and time of sale of tender form by post—
9-9-2015, 3 p. m.
Last date and time of sale of tender form —
15-9-2015, 3 p. m.
Last date and time of receipt of tender form—
16-9-2015, 11 a. m.
Last date and time of opening of tender form—
16-9-2015, 11.30 a. m.
Tender should be superscribed with tender
No. S4/10710/2015/MCC and addressed to the Principal,
Medical College Hospital, Kozhikode. Each tender should
be submitted along with an agreement signed and
executed in Kerala Stamp Paper worth ` 200
(Two hundred only) and Earnest Money Deposit @ 1 %
of the total cost of the items tendered for. The tenders
will be opened on the above date in the presence of the
tenderer or their authorized representatives.
409
15th SEPT. 2015]
STORES PURCHASE
1160
Rates should be quoted in Indian Rupees only
against payment. The tenders without the agreement and
sufficient Earnest Money Deposit and the tenders that do
not satisfy the conditions are liable to be rejected without
any cheque, draft, postage stamps etc., will not be
accepted towards the cost of tender forms. Stamp Paper
will be supplied to the firms outside Kerala, on request
along with remittance of ` 250 (Two hundered and Fifty
only) by Money Order taken in favour of Principal,
Medical College, Kozhikode.
Further details can be had from the Office of the
Principal, Medical College during working hours
(0495-2350212).
Office of the Govt. Medical College,
(Sd.)
Kozhikode-8.
Principal.
Z¿Lmkv ]ckyw
\º¿ Fkv1/4919/15/sF.Fw.-kn.-F-®v.
2015 BKÃv 7.
tImgn-t°mSv saUn-°¬ tImtf-Pv amXr-in-ip-kw-c-£W
tI{μ-Øn-te°v Bhiyamb Xmsg ]d-bp∂ _tbm-sI-ankv{Sn
dotb-P‚ vkv hnX-cWw sNøp-∂-Xn-te°v \n›nX
t^md-Øn¬ ap{Z-h® sS≠-dp-Iƒ £Wn-®psIm-≈p-∂p.
Z¿Lmkv AS°w sNøp∂ Ih-dn-\p-ap-I-fn¬ Z¿Lmkv \º¿
Fgp-tX-≠Xpw kq{]≠v, amXr-in-ip-kw-c-£W tI{μ-w,
tImgn-t°mSv˛8, tIcfw F∂ hnem-k-Øn¬ Ab-®n-cn-t°-≠-
Xm-Wv. Z¿Lm-kp-Iƒ Xmsg tN¿Øn-´p≈ Xob-Xnbnepw,
ka-bØpw At∏mƒ lmP-cm-bn-´p≈ Z¿Lmkv
ka¿∏n-®-h-cp-sS-tbm Ah¿ Npa-X-e-s∏-Sp-Øn-bn´p≈
GP‚p-am-cp-sStbm km∂n-≤y-Øn¬ Xpd-°p-∂-Xm-Wv. sshIn
In-´p∂Z¿Lm-kp-Iƒ ]cn-K-Wn°p-∂-X-√.
Z¿Lmkv ka¿∏n-°p-hm≥ Xm¬]-cy-ap-≈-h¿
sF.Fw.kn.F®v. Hm-^o-kn¬ At]-£n-°p-∂-]£w
Bh-iy-amb Z¿Lmkv t^md-߃ Xmsg sImSp-Øn-cn-°p-∂-
{]-Imcw XpI AS-®m¬ e`n-°p-∂-Xm-Wv. Z¿Lmkv
t^md-߃ ssIam‰w sNøm≥ ]mSp-≈-X-√. sN°p-Iƒ,
t]mtÃPv Ãmºv, {Um^v‰v F∂nh Z¿Lmkv t^md-Øns‚
hne-bmbn kzoI-cn-°p-∂-X-√. Z¿Lmkv t^mdw
hn.-]n.]n. Bbn Ab-bv°p-∂-X-√.
AS¶¬ XpI—` 14,83,487.
\nc-X-{Zhyw—1%.
Z¿Lmkv t^md-Øns‚ hne (\nIpXn klnXw):
H-dn-Pn-\¬—` 2,519.
Uyqπn-t°‰v—` 1,260
Z¿Lmkv t^mdw hn¬°p∂ Ah-km\ XobXnbpw
kabhpw—28-˛9˛2015, 3 aWn.
Z¿Lmkv kzoI-cn-°p∂ Ah-km\ Xob-Xnbpw
ka-bhpw—29˛9˛2015, 5 aWn.
Z¿Lmkv Xpd-°p∂ Xob-Xn-bpw ka-bhpw—
30˛9˛2015, 11 aWn.
Z¿Lmkv \nc°v {]m_-ey-Øn-en-cn-t°≠ XobXn—
31-˛9˛2016.
IqSpX¬ hnh-c-߃ {]hrØn ka-bØv Cu
Hm-^o-kn¬ At\z-jn-®m¬ Adn-bm-hp-∂-Xm-Wv. sS≠¿
\S-]-Sn-Iƒ ap∂-dn-bn-∏n-√msX \o´n- h-bv°p-∂-Xnt\m
\n¿Ønh-bv°p-∂-Xnt\m D≈ A[n-Imcw kq{]-≠n¬
\n£n-]vX-am-Wv.
No. S3-4919/15/IMCH.
7th August 2015.
Sealed tenders are invited for the supply of
Biochemistry Reagents Items in IMCH Medical College,
Calicut-8. List of items can be had from the office of
undersigned during office hours on any working days.
Envelop containing tenders should be superscribed with
tender number and should be addressed to the
Superintendent, IMCH, Medical College, Calicut-8, Kerala.
Tender must be submitted in sealed cover. Tender will be
opened in the presence of such of the tenderers or their
authorized persons who may be present at that time.
Late tenders will not be accepted.
Intending tenderers may on application to the
Superintendent, IMCH, Medical College, Calicut, Kerala
will obtain the requisite tender form in which the tenders
should be submitted.
Application for tender forms should be accompanied
by the cash remittance as noted below for a set of tender
forms in which will not be refunded under any
circumstances.
The tenderers should under take the responsibility
for the intimate service even if any change in the
dealership of the product supply.
The tender forms are not transferable. Checks,
postage stamp, draft etc. will not be accepted towards the
cost of tender forms. Tender forms will not be sent by
V.P.P. Tender should be accompanied by EMD amounting
to 1% (Rounded to next 1 Rupee) of the total cost of
articles tendered for. The tenders not accompanied by
sufficient EMD will not be entertained.
Approximate Cost—` 14,83,487.
Cost of tender form (Including Tax):
Original—` 2,519.
Duplicate—` 1,260.
If sent by post, Postage Charge—` 50.
Closing date and time of sale of tender forms—
28-9-2015, 3 p. m.
Last date and time of receipt of tender—
29-9-2015, 5 p. m.
Opening date and time of tender—30-9-2015,
11.30 a. m.
Date upto which rates are to be firm—31-9-2016.
Further details can be had from the office of the
undersigned during office hours on any working day. The
undersigned has the right to postpone/cancel the tender
without further notice.
410
15th SEPT. 2015]
STORES PURCHASE
1161
List of Items
Sl.
Items
Qty.
No.
1
SGPT (5×20ml)
150
2
Total Bilirubin (4×50ml)
140
.
3
Conjugate Bilirubin (4×50ml)
140
4
Urea (10×50 ml)
30
5
Creatinine (4×50ml)
150
6
Uric Acid (5×20ml)
110
7
Glucose (5×60ml)
100
8
Total Protein (1×10ml)
140
9
Albumin (1×100ml)
140
10
Calcium (2×50ml)
10
11
Cholesterol (5×30ml)
10
12
Phosphorous (1×50ml)
40
13
Magnesium (4×25ml)
40
14
CRP Turbidometry (100 T)
200
15
Alkaline Phosphatase (8×50ml)
30
16
XL wash (10×100ml)
40
17
Microprotein (1×50ml)
20
Institute of Maternal & Child Health,
(Sd.)
Govt. Medical College, Kozhikode.
Superintendent.
Museums and Zoos Department
Z¿Lmkv ]ckyw
\º¿ Fw. CkUv (C) 2224/2014.
2015 BKÃv 12.
Xncp-h-\-¥-]pcw ayqknbw arK-ime hIp-∏nse
Poh-\-°m¿°m-h-iy-amb 84 sdbn≥tIm-´p-Iƒ NphsS
tN¿°p∂ \n_‘-\-Iƒ°v hnt[-b-ambn kssπ
sNøp-∂-Xn\v CXp-ambn _‘-s∏´ ÿm]-\-߃/hy‡n-Iƒ
F∂n-h-cn¬ \n∂pw ko¬-sh® Z¿Lm-kp-Iƒ £Wn-®p
-sIm-≈p-∂p.
\n_-‘-\-Iƒ
1.
U_nƒ tIm-´nw-Kn-ep≈ sdbn≥tIm-´m-IWw.
2.
\√ \ne-hm-c-ap≈ Cd-°p-aXn sNbvX ss\tem¨
XpWn ]pdsa D≈-Xm-IWw.
3.
AIsØ ]mfn-bn¬ d∫¿ tIm´nw-Kp≈ ss\tem¨
Bbn-cn-°-Ww.
4.
Xmsg AS-t∏m-Sp-Iq-Snb c≠v t]m°-‰p-≈-Xm-I-Ww.
5.
]m‚pw j¿´pw {]tXy-Iw {]tXyIw D≠m-I-Ww.
6.
\n¿t±-im-\p-k-cWw XXL, XLL sskkpIfn¬
kssπ sNø-Ww.
7.
Izm´v sNøp∂ tamU-ens‚ kmºnƒ
sS≥Udn-
t\msSm∏w hbvt°-≠-Xm-Wv.
8.
kssπ Hm¿U¿ e`n-°p∂ÿm]\w tIm´n\v apI-fn¬
\n¿t±-in-°p∂ ÿm\Øpw hen-∏-Ønepw ayqknbw
arK-ime hIp-∏ns‚ t]cpw Nn”hpw Bte-J\w
sNtø-≠-Xm-Wv.
9.
sXm∏n-tbmSpIqSnbXv Bbn-cn-°-Ww.
ko¬sh®v Z¿Lm-kp-Iƒ Ub-d-IvS¿, ayqknbw
arK-ime hIp∏v, Xncp-h-\-¥-]pcw˛695 033 F∂ hnem-k-Øn¬
Bbn-cn-°Ww Ab-bvt°-≠-Xv. sS≥U¿ t^map-Iƒ 19-˛9-˛2015
apX¬ 24-˛9-˛2015- sshIp-t∂cw 3.30 aWnhsc B^o-kn¬
\n∂pw e`n-°p-∂-Xm-Wv. Z¿Lm-kp-Iƒ kzoI-cn-°p∂
Ah-km\ XobXn 25-˛9-˛2015-˛\v D®bv°v 3 aWn-h-sc-bm-Wv.
At∂ Znhkw 3. 30- Z¿Lm-kp-Iƒ ka¿∏n-®-h-cp-sStbm
Ah¿ Npa-X-e-s∏-Sp-Øn-b-h-cp-sStbm km∂n-≤y-Øn¬
Z¿L-kp-Iƒ Xpd-°p-∂-Xm-Wv. Xma-kn®v e`n-°p∂
Z¿Lm-kp-Iƒ kzoI-cn-°p-∂-X√.
sS≥U¿ t^mdw Bh-iy-ap-≈-h¿ Ubd-IvS¿, ayqknbw
arK-ime hIp-∏ns‚ t]cn¬ At]£ \¬tI-≠Xpw
t^mans‚ hne-bmb ` 400˛w hm‰pw Uyqπn-t°-‰n\v ` 200˛w,
hm‰pw
HSp-t°-≠-Xm-Wv.
sS≥U¿
t^map-Iƒ
ssIamdm-hp-∂-X-√. IqSmsX Izm´v sNøp∂ XpI-bpsS 1%
\nc-X-{Zhyambn Ub-d-IvS¿, ayqknbw B‚ v kq F∂
t]cn¬ amdm-hp∂ Un.Un.˛bpw sS≥U¿ t^man-s\m∏w
ka¿∏n-t°-≠-Xm-Wv. sS≥U¿ bmsXmcp Imc-Whpw IqSmsX
\nc-kn-°m\pw amddn hbv°m-\p-ap≈ A[n-Imcw
Ub-d-IvS-dn¬ \n£n-]vX-am-Wv. CXns\Ipdn®v IqSp-X¬
hnh-c-߃ ayqknbw arK-ime hIp-∏ns‚ B^o-kn¬
\n∂pw {]h¿Øn Znh-k-ß-fn¬ B^okv ka-bØv
Adn-bm-hp-∂-Xm-Wv.
Ub-d-IvS-td‰v,
ayqkn-bhpw arK-im-e-bpw,
(H-∏v)
Xncp-h-\-¥-]pcw.
Ub-d-IvS¿.
Police Department
Z¿Lmkv ]ckyw
\º¿ C1-˛13224/2015/M.
2015 BKÃv 11.
ae-∏pdw Fw. Fkv. ]n. Bÿm\ Iº\nbnse
sa nse D]-tbm-K-Øn-\mbn Xmsg ]d-bp∂ D]-I-c-W-߃
hnX-cWw sNøm≥ Xøm-dp≈ AwKo-IrX ÿm]-\-ß-fn¬
\n∂pw ap{Z-h® Z¿Lm-kp-Iƒ £Wn-®p-sIm-≈p-∂p.
Z¿Lmkv 22-˛9-˛2015 D® Ign™v 2 aWn°papºmbn Cu
B^o-kn¬ e`n-°-Ø° hn[-Øn¬ ka¿∏n-t°-≠-Xm-Wv.
Z¿Lm-kn-s\m∏w ` 100˛s‚ ap{Z]{X-Øn¬ F{Kn-sa‚pw
\nb-am-\p-krX skIyq-cn‰n XpI-bpsS Unam≥Uv {Um^v‰pw
ka¿∏n-t°-≠-Xm-Wv. C{]-Imcw e`n-°p∂ Z¿Lmkv
\n_-‘-\-Iƒ°v hnt[-b-ambn 25-˛9-˛2015 cmhnse
11 aWn°v Cu B^o-kn¬ sh®v Xpd-°p-∂-Xm-bn-cn°pw.
Z¿Lmkv ka¿∏n-°p-∂-Xn-\p≈ t^mdw `1,200 hne
{Ia-Øn¬ 10-˛9-˛2015 XobXn apXep≈ {]h¿Øn Znh-k-ß-
fn¬ Cu B^o-kn¬ \n∂v e`n-°p-∂-Xm-Wv. Z¿Lmkv
t^md-Øns‚
\ne-hn-ep≈
hne-bnepw
hn¸\
\nIp-Xn-bnepw am‰w h∂m¬ t^mdw hne-bmbn AS®
411
15th SEPT. 2015]
STORES PURCHASE
1162
XpI-bpsS _m°n XpI-bpsS sNem≥ lmP-cm-t°-≠-Xm-Wv.
ka¿∏n-°-s∏-Sp∂
Z¿Lmkv
kzoI-cn-°p-hm\pw
\nc-kn-°p-hm\pw Z¿Lmkv Xpd-°p∂ Xob-Xn-bn¬ am‰w
hcp-Øp-hm-\pap≈ A[n-Imcw Fw. Fkv. ]n. Iam-≠‚n¬
\n£n-]vX-am-Wv.
Z¿Lm-kp-Iƒ
ka¿∏n-°p-hm≥
Dt±-in-°p-∂-h¿ Z¿Lmkv \n_-‘-\Iƒ I¿i-\-ambn
]men-t°-≠-Xm-Wv.
Spectification
Cappacity
Remarks
of item
Steamer
At a time 30 Kg. rice
All body
Set (Rice, Sambar,
cooking bow (2 Nos.),
stainless
Tea, Idly & Puttu,
Curry vessel-1 No. 1dly
steel with
Meat and Milk
1000 Nos./hour-1 No. and
ISI Mark
Puttu Kutty 16 Kutty
set-1No.
ae-_m¿ kvs]jy¬ t]meokv,
Da, sF.-]n.-F-kv.,
ae-∏p-dw.
Iam-≠‚ v.
Survey and Land Records Department
eLp Z¿Lmkv ]ckyw
d^v. Un˛2492/2013.
2015 BKÃv 13.
IÆq¿ Pn√-bnse X-fn-∏dºv Xmeq-°n¬s∏´ ]ø-∂q¿,
Ib-cfw, ]∂n-bq¿ F∂o hnt√-Pp-I-fn¬ dok¿sΔ
{]h¿Ø-\-Øn-\mbn k¿sΔ-I-√p-Iƒ hnX-cWw sNøp-∂-Xn\v
Pn√m Ie-IvS¿ \n›-bn® {]mtZ-inI \nc-°n¬ sS≠-dp-Iƒ
£Wn-®p-sIm-≈p-∂p.
\√ Dd-∏p≈ Icn-¶-√n¬ 60 × 15 × 15 sk‚o-ao-‰¿
Af-hn-ep≈ I√p-Iƒ (2200 I√p-Iƒ).
F√m I√p-Ifpw Dd-∏p≈ Icn-¶-√n¬ Xo¿ØXpw
Hmtcm I√n-s‚bpw apI-fn¬ \n∂v Xmtg°v aq∂n-semcp
`mKw NXp-c-s∏-Sp-ØnbXpw Ah-bpsS Hcp hiØv
1 sk.ao. Bg-Ønepw 12 sk.ao. \of-Ønepw 7 sk.ao.
hoXn-bnepw sXßv AS-bmfw sImØnbXpw Bbn-cn-°Ww.
sXßv AS-bm-f-Øns‚ apI-f‰w I√ns‚ apI-fn¬ \n∂v
7 sk.ao. Xmsg-bm-bn-cn-°-Ww. Hmtcm I√n-s‚bpw apI-fn¬
a[y-Øn¬ 1 sk.ao. Bg-Øn-ep-≈ πa‰v tlmfpw
D≠m-bn-cn-°-Ww.
samØw AS-¶¬ XpI —` 2,00,000 (c≠v e£w)
sS≠-dp-Iƒ AS°w sNbvX Ih-dn≥ta¬ Xfn-∏-dºv
Xmeq-°n¬ dok¿sΔ°v k¿sΔ- I-√p-Iƒ hnX-cWw
sNøp-∂-Xn-\p≈ sS≠¿ Fs∂-gpXn Akn- v Ub-d-IvS¿,
k¿sΔbpw `qtc-Jbpw hIp∏v (do-k¿sΔ) IÆq¿- F∂
hnem-k-Øn¬ 16-˛9-˛2015˛mw Xob-Xn°v D®bv°v 2 aWnt°m
AXn-\p-aptºm In´-Ø-°-hÆw Ab-®n-cn-t°-≠-Xm-Ip-∂p.
sshIn-In-´p∂ sS≠-dp-Iƒ kzoI-cn-°p-∂-X-√. sS≠-dp-Iƒ
A∂p-Xs∂ aq∂v aWn°v X¬k-abw lmP-cp≈
sS≠-dp-Im-cp-sS-tbm Ah¿ tcJm-aqew A[n-Im-c-s∏-Sp-Ønb
{]Xn\n-[n-I-fp-sStbm km∂n-≤y-Øn¬ Xpd-°p-∂-Xm-Wv.
k¿sΔ I√p-Iƒ dok¿sΔbv°v \ntbm-Kn-®n-´p≈
DtZym-K-ÿ¿ \¬Ip∂ C‚‚n¬ ]d-bp∂ ÿe-ß-fn¬
C‚‚ v In´n 15 Znh-k-Øn-\Iw hnX-cWw sNtø-≠-Xm-Wv.
sS≠¿ ka¿∏n-°p-hm≥ Dt±-in-°p-∂-h¿ AS-¶¬
XpI-bpsS 10 iX-am-\-Øn¬ Ipd-bm-sX-bp≈ XpIbv°v
G‰hpw Npcp-ßn-bXv ` 20,000 (Ccp]-Xn-\m-bn-cw) F∂-Xn\v
hnt[-b-ambn sS≠-dp-Im-cs‚ kzImcy kzØp-°-fpsS
hnh-c-߃ ImWn®n-´p≈ Hcp A ¬ tkmƒh≥kn
k¿´n-^n-°‰v ` 50 ap{Z-]-{X-Øn¬ Icm¿ Xob-Xn°v 6
amk-Øn-\Iw _‘-s∏´ Xmeq-°p-I-fnse Xl-io¬Zmcn¬
\n∂pw hmßn-bn-´p-≈Xv sS≠-dn-t\m-sSm∏w AS°w
sNtø-≠-Xm-Wv.
ÿnc-s∏-Sp-Øp∂ sS≠-dp-Im-c≥ tkmƒh≥kn
k¿´n-^n-°-‰n¬ ImWn® kzØns‚ ]Ip-Xn-`mKw Icm¿
Ign-bp-∂-Xp-hsc Kh¨sa‚n-te°v ]W-b-s∏-Sp-tØ-≠Xpw
A√mØ]£w Icm¿ aXn∏p hne-bpsS 5 iX-am-\w hcp∂
XpI _m¶n-e-S®v _m¶v {Um^vt‰m _m¶v Kymc‚ntbm Icm¿
Ign-bp-∂-Xp-hsc Kh¨sa‚n-te°v ]W-b-s∏-Sp-tØ-≠Xpw
BIp-∂p. Cu XpI Icm¿ a-Xn-∏phn-e-bpsS 5 iX-am\w
Pmay-Xp-I-bmbn sS≠¿ kzoI-cn-®-Xn-\p-tijw sS≠-dp-Im-c≥
\nba{]Imcw HSp-°p-∂-Xn\v ]pd-sa-bm-Ip-∂p. sS≠¿
ka¿∏n-°p-∂-Xn-\p≈ \n›nX t^mdw dok¿sΔ Akn-Â v
Ub-d-IvS¿, IÆq¿ F∂ hnem-k-Øn¬ At]£ sImSpØv
hmßm-hp-∂-Xm-Wv.
sS≠¿ t^md-Øn-\p≈ At]-£-tbm-Sp-IqSn sS≠¿
t^md-Øns‚ hne-bmb ` 2,000 hn¬∏\ \nIp-Xnbpw
A[nI hn¬∏\ \nIp-Xnbpw ]W-ambn HSp-t°-≠-Xm-Ip∂p.
bmsXmcp Imc-W-h-im-epw sS≠¿ t^md-Øns‚ hne aS°n
sImSp-°p-∂-X-√. sS≠¿ t^md-ß-fpsS hn¬∏\ 16-˛9-˛2015-˛mw
XobXn D®bv°v 12 aWn°v Ah-km-\n-°p-∂-Xm-Wv.
sN°p-Iƒ, X]m¬ ap{Z-Iƒ apX-em-bh sS≠¿
t^md-Øns‚ hne-bmbn kzoI-cn-°p-Itbm sS≠¿ t^mdw
hn. ]n. ]n. Bbn Ab-bv°p-Itbm sNøp-∂-X-√. Bh-iy
-ap-≈-h¿°v Uyqπn-t°‰v sS≠¿ t^mdw ` 1,000 hn¬∏\
\nIp-Xnbpw A[nI hn¬∏\ \nIp-Xnbpw HSp-°n-bm¬
e`n-°p-∂-Xm-Wv.
Hmtcm sS≠-dn-s‚bpw IqsS k¿sΔ Ub-d-IvS-dpsS
t]cn¬ amdm-hp∂ Xc-Øn¬ AS-¶¬ XpI-bpsS 1 iX-am\w
` 2,000 (c-≠m-bncw cq]) \nc-X-{Zhyw 16-˛9-˛2015-˛mw
XobXn D®bv°v 1 aWn°v apºmbn Cu B^o-kn¬ AS®v
ckoXn hmßn-s°m-t≈-≠-Xm-Wv. \nc-X-{Zhyw _m¶v
{Um^v‰mtbm {Sjdn tkhnwKvkv _m¶v sU-t∏m-kn-‰mtbm
\¬Im-hp-∂-Xm-Wv. \nc-X-{Zhyw sI´n-h®v cioXn AS°w
sNømØ sS≠-dp-Iƒ ]cn-K-Wn-°p-∂-X-√. sS≠-dns‚
s]mXp \n_-‘-\-I-fn¬ 33-˛mw JWvUn-I-bn¬ \n¿t±-in®
{]Imcw ` 50 ap{Z-]-{X-Øn¬ \n›nX t^md-Øn¬ Xøm-dm°n
km£y-s∏-Sp-Ønb Hcp Icm¿ IqSn sS≠-dn-t\m-sSm∏w
AS°w sNbvXn-cn-°-Ww. ta¬ hhy-ÿ-Iƒ ]men-°-
s∏-Sm-sX-bp≈ sS≠-dp-Iƒ ]cn-K-Wn-°-s∏-Sp-∂-X-√.
-IqSpX¬ hnh-c-߃ dok¿sΔ Akn-Â v Ub-d-IvS¿,
Akn-Â v Ub-d-IvS¿ IÆq¿ B^o-kn¬ \n∂pw B^okv
ka-b-ß-fn¬ Adn-bm-hp-∂-Xm-Wv. (Phone No. 0497-2700513).
dok¿sΔ Hm^o-kv,
(H-∏v)
IÆq¿.
Akn-Â v Ub-d-IvS¿.
412
15th SEPT. 2015]
STORES PURCHASE
1163
Technical Education Department
eLp Z¿Lmkv ]ckyw
\º¿ Un-˛372/2015.
2015 BKÃv 10.
amthen°c cmPm chnh¿Ω tImtfPv Hm^v ss^≥
B¿Svknse s]bn‚nwKv Un∏m¿´vsa‚n-te°v Cu-k-ep-Iƒ
kssπ sNøp∂Xn\v ap{Z-h® Z¿Lm-kp-Iƒ £Wn-®-p-
sIm≈p∂p.
Z¿Lmkv \º¿-—-Un-˛372/2015.
AS¶¬ XpI—` 4,00,000.
Z¿Lmkv t^md-Øns‚ hne (\nIpXn Dƒs∏sS) :
HdnPn\¬—` 832.
Uyqπnt°‰v—` 416.
Z¿Lmkv t^md߃ e`n°p∂ Ah-km\ Xob-Xnbpw
ka-bhpw—30˛9˛2015, 2 aWn.
Z¿Lm-kpIƒ kzoIcn°p∂ Ah-km\ Xob-Xnbpw
ka-bhpw—30˛9˛2015, 2.30 aWn.
Z¿Lmkv Xpd-°p∂ Xob-Xnbpw ka-bhpw—30˛9˛2015,
3 aWn.
Z¿Lmkv t^md߃ Sn Hm^okn¬\n∂pw t\cnt´m
aWntbm¿U¿ Btbm hnebS®v ssI∏‰mhp∂XmWv.
Z¿Lmkv t^md߃ cPntÿUv X]men¬ Bhiyap≈h¿
AhbpsS hnetbmsSm∏w ` 36 A[n-Iw Xmsg
H∏n´ncn°p∂ ka£w 25˛9˛2015, 3 aWn°papºmbn-
e`n°Ø°hn[w aWn-tbm¿U¿ Ab-bvt°-≠-Xm-Wv.
sN°pIƒ, t]mtÃPv ÃmºpIƒ, {Um^v‰pIƒ apXembh
Z¿Lmkv t^mdßfpsS hnebmbn kzoIcn°p∂X√.
Z¿Lmkv t^md߃ ssIamdm≥ A\phZn°p∂X√.
Z¿LmkpIƒ ka¿∏n°p∂h¿ ` 100-˛s‚ hnebp≈
ap{Z]{XØn¬ kΩX]{Xw H∏n´p\¬tI≠Xpw samØw
hnebpsS 1% \ncX{Zhyambn sI´nhbvt°≠XpamWv.
kΩX]{Xhpw \ncX{Zhyhpw C√mØ F√m Z¿LmkpIfpw
\nckn°p∂XmWv. Z¿LmkpIƒ ka¿∏n°p∂ Ihdns‚
]pdØv Z¿Lmkv \ºcpw kzoIcn°p∂ Ahkm\ XobXnbpw
FgpXnbncnt°≠XmWv.
Z¿Lmkv t^mdhpw Z¿Lmkv {]Imcw \¬tI≠
km[\ßfpsS hniZmwißfpw Sn Hm^okn¬\n∂pw
{]hrØn kabßfn¬ e`n°p∂XmWv.
No. D-372/2015.
10th August 2015.
Sealed and competitive tenders are invited for the
supply of Easels for the Painting Department of
Raja Ravi Varma College of Fine Arts, Mavelikara,
Pin-690 101, Alappuzha District, Tel: 0479-2341199,
email: [email protected].
Tender Number—D-372/2015.
Estimated Amount—` 4,00,000.
Cost of tender form (Including all Taxes):
Original—` 832.
Duplicate—` 416.
Last date and time for sale of tender form—
30-9-2015, 2 p. m.
Last date and time for receipt of tender—30-9-2015,
2.30 p. m.
Date and time for opening of tender—30-9-2015,
3 p. m.
Tender forms can be had from the office of the
undersigned on cash remittance as above or by Money
Order on all working days between 10 a. m. and 3 p. m.
Those who want tender forms by Registered Post
should send additional ` 36 for each tender along with
the cost of tender forms by Money Order to the
undersigned, which should reach this office on or before
3 p. m. on 25-9-2015. Any other mode of payment as cost
of tender form will not be accepted. The tender forms are
not transferable.
Tender No. and date of opening must be
superscribed on the envelope contains the tender. Tenders
must be accompanied with an agreement executed and
signed on Kerala Stamp Paper of value ` 100 and 1% of
the total cost of articles tendered as EMD. Tenders
without agreement and EMD will be rejected. Detailed list
of items required with specification of the materials can
be obtained from the office of the undersigned on
working hours.
LIST OF ITEMS
Items with Specification and Quantity—Heavy Duty
Studio Easl size :56 x 61 x 241cms Made of Beech/Elm
wood with an oiled/ varnished finishing, This heavy duty
Studio Easel hdds canvas—upto 213 cms and large format
canvas—16 Nos.
Raja Ravi Varma College of
(Sd.)
Fine Arts, Mavelikkara.
Principal.
eLp Z¿Lmkv ]ckyw
(1)
\º¿ Un1/3769/2015.
2015 BKÃv 8.
tIm´bw
cmPohvKm‘n
C≥Ãn-‰yq´v
Hm^v
sSIvt\m-f-Pnbnse hnhn[ Un∏m¿´vsa‚pIfn-te°v {]n‚-dp-Iƒ
\¬Ip-∂-Xn\v Xm¬∏cy-ap≈ Icm-dp-Im-cn¬\n∂pw ap{Z-h®
Ih-dp-I-fn¬ a’ckz`m-h-ap≈ Z¿Lm-kp-Iƒ £Wn-®p-
sIm-≈p-∂p.
AS¶¬ XpI—` 3,16,000.
Z¿Lmkv t^mdØns‚ hne :
A ¬—` 735.
]I¿∏v—` 420.
Z¿Lmkv t^mdw hn¬°p∂ Ah-km\ Xob-Xnbpw
ka-bhpw—16˛9˛2015, 1 aWn.
]qcn-∏n® Z¿Lm-kv kzoIcn°p∂ Ah-km\
Xob-Xnbpw ka-bhpw—17˛9˛2015, 11 aWn.
413
15th SEPT. 2015]
STORES PURCHASE
1164
Z¿Lmkv Xpd-°p∂ Xob-Xnbpw ka-bhpw—
17˛9˛2015, 2 aWn.
Z¿Lmkv t^mdw X]m¬ aptJ\ Bh-iy-ap-≈-h¿
` 35 A[n-I-ambn Hmtcm Z¿Lmkv t^md-Øn-s‚bpw
hne-tbm-sSm∏w aWn-tbm¿Udmbn Ab-bvt°-≠-Xm-Wv.
aWn-tbm¿U¿ kzoI-cn-°p∂ Ah-km\ XobXn 9˛9˛2015
Bbn-cn-°pw. apIfn¬ ]d-™n-cn-°p∂ Z¿Lmkv
t^mdØns‚ hne F√m \nIp-Xnbpw Dƒs∏-sS-bm-Wv.
Z¿Lmkv t^md-߃ {]n≥kn-∏mƒ, cmPo-hvKm‘n
C≥Ãn-‰yq´v Hm^v sSIvt\m-f-Pn, sh≈q¿ ]n.- H., ]mºmSn,
tIm´bw˛686 501 F∂hnem-k-Øn¬ t\cnt´m aWn-tbm¿U¿
aptJ-\tbm F√m {]hrØn Znh-k-ß-fnepw cmhnse
10 aWn apX¬ sshIp-t∂cw 3 aWnhsc e`n-°p-∂-Xm-Wv.
Z¿Lmkv ka¿∏n-°p∂ Ih-dn\papI-fn¬ Z¿Lmkv
\ºcpw Xob-Xnbpw tcJ-s∏-Sp-tØ-≠-Xm-Wv. Z¿Lmkv
t^md-߃ bmsXmcp Imc-W-h-imepw ssIam‰w
sNøp-hm≥ ]mSp-≈-X-√. sN°v, {Um^v‰v, t]mì Hm¿U¿,
X]m¬ Ãmºv apX-em-bh kzoI-cn-°p-∂-X-√.
Z¿Lmkv \nbaw A\p-k-cn®v Z¿Lmkv ka¿∏n-°p∂
Bƒ Z¿Lm-kn-t\m-sSm∏w ` 100--- hne-bp≈ tIc-f
ap-{Z-∏-{X-Øn¬ kΩ-X-]-{Xhpw samØw XpI-bpsS Hcp
iX-am\w \nc-X-{Z-hyhpw ka¿∏nt°-≠-Xm-Wv. Ch C√mØ
Z¿Lm-kp-Iƒ \ncp-]m-[nIw \nc-kn-°s∏Sp-∂-Xm-Wv.
D]-I-c-W-ß-fpsS hni-Z-hn-h-c-߃ Z¿Lmkv t^md-Øn-s\m∏w
e`n-°p-∂-XmWv.
No. D1/3769/2015/RIT.
8th August 2015.
Sealed tenders are invited for the supply of Printers
to Various Department of Rajiv Gandhi Institute of
Technology, Kottayam.
Total Estimate Cost—` 3,16,000.
Cost of tender forms (Including Taxes):
Original— ` 735.
Duplicate— ` 420.
Last date and time of sale of tender—
16-9-2015, 1 p. m.
Last date and time of receipt of tender—
17-9-2015, 11 a. m.
Date
and
time
of
opening
of
tender—
17-9-2015, 2 p. m.
Those who want tender forms by Registered post
should send ` 35 extra for each tender besides the cost
of tender forms by Money Order to the undersigned
which should be received on or before 9-9-2015.
Tender forms can be had from the Office of the
Principal, Rajiv Gandhi Institute of Technology,
Velloor P. O., Pampady, Kottayam-686 501 on a cash
remittance as above or by Money Order on all working
days between 10 a.m. to 3 p.m. The tender should be
superscribed as Tender No. and date. Cheque, Postage
Stamp, Draft, Postal Order etc. will not be accepted
towards the cost of the tender forms. The tender forms
are not transferable.
As per the tender condition, the tenderer should
send along with this tender with an agreement executed
duly signed in Kerala Stamp Paper of value of ` 100 and
EMD 1% of total cost of the articles tendered by way of
DD in favour of the Principal, Rajiv Gandhi Institute of
Technology, Kottayam. Tender without agreement and
EMD will be rejected. Detailed specification will be issued
along with the tender forms.
(2)
\º¿ Un1/3960/2015.
2015 BKÃv 12.
tIm´bw
cmPohvKm‘n
C≥Ãn-‰yq´v
Hm^v
sSIvt\m-f-Pnbnse
knhn¬
F©n-\o-b-dnwKv
Un∏m¿´vsa‚n-te°v Double stage single head light duty
multi mill and 7 Nos. of Exhaust fans \¬Ip-∂-Xn\v
Xm¬∏cy-ap≈ Icm-dp-Im-cn¬\n∂pw ap{Z-h® Ih-dp-I-fn¬
a’ckz`m-h-ap≈ Z¿Lm-kp-Iƒ £Wn-®p-sIm-≈p-∂p.
AS¶¬ XpI—` 1,11,500.
Z¿Lmkv t^mdØns‚ hne :
A ¬—` 420.
]I¿∏v—` 210.
Z¿Lmkv t^mdw hn¬°p∂ Ah-km\ Xob-Xnbpw
ka-bhpw—15˛9˛2015, 1 aWn.
]qcn-∏n® Z¿Lm-kv kzoIcn°p∂ Ah-km\
Xob-Xnbpw ka-bhpw—16˛9˛2015, 11 aWn.
Z¿Lmkv Xpd-°p∂ Xob-Xnbpw ka-bhpw—
16˛9˛2015, 2 aWn.
Z¿Lmkv t^mdw X]m¬ aptJ\ Bh-iy-ap-≈-h¿
` 35 A[n-I-ambn Hmtcm Z¿Lmkv t^md-Øn-s‚bpw
hne-tbm-sSm∏w aWn-tbm¿Udmbn Ab-bvt°-≠-Xm-Wv.
aWn-tbm¿U¿ kzoI-cn-°p∂ Ah-km\ XobXn 8˛9˛2015
Bbn-cn-°pw. apIfn¬ ]d-™n-cn-°p∂ Z¿Lmkv
t^mdØns‚ hne F√m \nIp-Xnbpw Dƒs∏-sS-bm-Wv.
Z¿Lmkv t^md-߃ {]n≥kn-∏mƒ, cmPo-hvKm‘n
C≥Ãn-‰yq´v Hm^v sSIvt\m-f-Pn, sh≈q¿ ]n.- H., ]mºmSn,
tIm´bw˛686 501 F∂hnem-k-Øn¬ t\cnt´m aWn-tbm¿U¿
aptJ-\tbm F√m {]hrØn Znh-k-ß-fnepw cmhnse
10 aWn apX¬ sshIp-t∂cw 3 aWnhsc e`n-°p-∂-Xm-Wv.
Z¿Lmkv ka¿∏n-°p∂ Ih-dn\papI-fn¬ Z¿Lmkv
\ºcpw Xob-Xnbpw tcJ-s∏-Sp-tØ-≠-Xm-Wv. Z¿Lmkv
t^md-߃ bmsXmcp Imc-W-h-imepw ssIam‰w
sNøp-hm≥ ]mSp-≈-X-√. sN°v, {Um^v‰v, t]mì Hm¿U¿,
X]m¬ Ãmºv apX-em-bh kzoI-cn-°p-∂-X-√.
Z¿Lmkv \nbaw A\p-k-cn®v Z¿Lmkv ka¿∏n-°p∂
Bƒ Z¿Lm-kn-t\m-sSm∏w ` 100--- hne-bp≈ tIc-f
ap-{Z-∏-{X-Øn¬ kΩ-X-]-{Xhpw samØw XpI-bpsS Hcp
iX-am\w \nc-X-{Z-hyhpw ka¿∏nt°-≠-Xm-Wv. Ch C√mØ
Z¿Lm-kp-Iƒ \ncp-]m-[nIw \nc-kn-°s∏Sp-∂-Xm-Wv.
D]-I-c-W-ß-fpsS hni-Z-hn-h-c-߃ Z¿Lmkv t^md-Øn-s\m∏w
e`n-°p-∂-XmWv.
414
15th SEPT. 2015]
STORES PURCHASE
1165
No. D1/3960/2015/RIT.
12th Agust 2015.
Sealed tenders are invited for the supply of Double
stage single head light duty multi mill and 7 Nos. of
Exhaust Fans to CE Department of Rajiv Gandhi
Institute of Technology, Kottayam.
Estimate Cost—` 1,11,500.
Cost of tender forms (Including Taxes).
Original— ` 420.
Duplicate— ` 210.
Last date and time of sale of tender from—
15-9-2015, 1 p. m.
Last date and time of receipt of tender—
16-9-2015, 11 a. m.
Date
and
time
of
opening
of
tender—
16-9-2015, 2 p. m.
Those who want tender forms by Registered Post
should send ` 35 extra for each tender besides the cost
of tender forms by Money Order to the undersigned
which should be received on or before 8-9-2015.
Tender forms can be had from the Office of the
Principal, Rajiv Gandhi Institute of Technology,
Velloor P. O., Pampady, Kottayam-686 501 on a cash
remittance as above or by Money Order on all working
days between 10 a.m. to 3 p.m. The tender should be
superscribed with Tender No. and date. Cheque, Postage
Stamp, Drafts, Postal Order etc. will not be accepted
towards the cost of the tender forms. The tender forms
are not transferable.
As per the tender condition, the tenderer should
send along with this tender with an agreement executed
duly signed in Kerala Stamp Paper of value of ` 100 and
EMD 1% of total cost of the articles tendered by way of
DD in favour of the Principal, Rajiv Gandhi Institute of
Technology, Kottayam. Tender without agreement and
EMD will be rejected. Detailed specification will be issued
along with the tender forms.
(3)
\º¿ Un1/4131/2015.
2015 BKÃv 12.
tIm´bw cmPohv Km‘n C≥Ãn-‰yq´v Hm^v
sSIvt\m-f-Pnbnse B¿°n-sS-Iv®¿ Un∏m¿´vsa‚n-te°v
3 Fb¿ I≠o-j-W¿ \¬Ip-∂-Xn\v Xm¬∏cy-ap≈ Icm-dp-
Im-cn¬\n∂pw ap{Z-h® Ih-dp-I-fn¬ a’ckz`m-h-ap≈
Z¿Lm-kp-Iƒ £Wn-®p-sIm-≈p-∂p.
AS¶¬ XpI—` 1,05,000.
Z¿Lmkv t^mdØns‚ hne :
A ¬—` 420.
]I¿∏v—` 210.
Z¿Lmkv t^mdw hn¬°p∂ Ah-km\ Xob-Xnbpw
ka-bhpw—17˛9˛2015, 1 aWn.
]qcn-∏n® Z¿Lm-kv kzoIcn°p∂ Ah-km\
Xob-Xnbpw ka-bhpw—18˛9˛2015, 11 aWn.
Z¿Lmkv Xpd-°p∂ Xob-Xnbpw ka-bhpw—
18˛9˛2015, 2 aWn.
Z¿Lmkv t^mdw X]m¬ aptJ\ Bh-iy-ap-≈-h¿
` 35 A[n-I-ambn Hmtcm Z¿Lmkv t^md-Øn-s‚bpw
hne-tbm-sSm∏w aWn-tbm¿Udmbn Ab-bvt°-≠-Xm-Wv.
aWn-tbm¿U¿ kzoI-cn-°p∂ Ah-km\ XobXn 8˛9˛2015
Bbn-cn-°pw. apIfn¬ ]d-™n-cn-°p∂ Z¿Lmkv
t^mdØns‚ hne F√m \nIp-Xnbpw Dƒs∏-sS-bm-Wv.
Z¿Lmkv t^md-߃ {]n≥kn-∏mƒ, cmPo-hvKm‘n
C≥Ãn-‰yq´v Hm^v sSIvt\m-f-Pn, sh≈q¿ ]n.- H., ]mºmSn,
tIm´bw˛686 501 F∂hnem-k-Øn¬ t\cnt´m aWn-tbm¿U¿
aptJ-\tbm F√m {]hrØn Znh-k-ß-fnepw cmhnse
10 aWn apX¬ sshIp-t∂cw 3 aWnhsc e`n-°p-∂-Xm-Wv.
Z¿Lmkv ka¿∏n-°p∂ Ih-dn\papI-fn¬ Z¿Lmkv
\ºcpw Xob-Xnbpw tcJ-s∏-Sp-tØ-≠-Xm-Wv. Z¿Lmkv
t^md-߃ bmsXmcp Imc-W-h-imepw ssIam‰w
sNøp-hm≥ ]mSp-≈-X-√. sN°v, {Um^v‰v, t]mì Hm¿U¿,
X]m¬ Ãmºv apX-em-bh kzoI-cn-°p-∂-X-√.
Z¿Lmkv \nbaw A\p-k-cn®v Z¿Lmkv ka¿∏n-°p∂
Bƒ Z¿Lm-kn-t\m-sSm∏w ` 100--- hne-bp≈ tIc-f
ap-{Z-∏-{X-Øn¬ kΩ-X-]-{Xhpw samØw XpI-bpsS Hcp
iX-am\w \nc-X-{Z-hyhpw ka¿∏nt°-≠-Xm-Wv. Ch C√mØ
Z¿Lm-kp-Iƒ \ncp-]m-[nIw \nc-kn-°s∏Sp-∂-Xm-Wv.
D]-I-c-W-ß-fpsS hni-Z-hn-h-c-߃ Z¿Lmkv t^md-Øn-s\m∏w
e`n-°p-∂-XmWv.
No. D1/4131/2015/RIT.
12th Agust 2015.
Sealed tenders are invited for the supply of 3 Nos.
of Air Conditioners to Architecture Department of
Rajiv Gandhi Institute of Technology, Kottayam.
Estimate Cost—` 1,05,000.
Cost of tender form (Including VAT).
Original— ` 420.
Duplicate— ` 210.
Last date and time of sale of tender from—
17-9-2015, 1 p. m.
Last date and time of receipt of tender—
18-9-2015, 11 a. m.
Date and time of opening of tender—18-9-2015,
2 p. m.
Those who want tender forms by Registered Post
should send ` 35 extra for each tender besides the cost
of tender forms by Money Order to the undersigned
which should be received on or before 8-9-2015.
Tender forms can be had from the Office of the
Principal, Rajiv Gandhi Institute of Technology,
Velloor P. O., Pampady, Kottayam-686 501 on a cash
remittance as above or by Money Order on all working
days between 10 a.m. to 3 p.m. The tender should be
superscribed with Tender No. and date. Cheque, Postage
Stamp, Drafts, Postal Order etc. will not be accepted
towards the cost of the tender forms. The tender forms
are not transferable.
15th SEPT. 2015]
STORES PURCHASE
1166
As per the tender condition, the tenderer should
send along with this tender with an agreement executed
duly signed in Kerala Stamp Paper of value of ` 100 and
EMD 1% of total cost of the articles tendered by way of
DD in favours of the Principal, Rajiv Gandhi Institute of
Technology, Kottayam. Tender without agreement and
EMD will be rejected. Detailed specification will be issued
along with the tender forms.
Rajiv Gandhi Institute of
(Sd.)
Technology, Kottayam.
Principal.
eLp Z¿Lmkv ]ckyw
\º¿ ]n1/2491/2015.
2015 BKÃv 6.
tImgn-t°mSv
Kh¨sa‚ v
F©n-\o-b-dnwKv
tImtf-Pnse sIan-°¬ F©n-\o-b-dnwKv Un∏m¿´vsa‚n
-te-°v B-h-iy-amb sIan-°¬kpw •mkv \n¿ΩnX
D¬∏-∂-ßfpw hnX-cWw sNøp-∂-Xn-te°mbn ap{Zh®
Z¿LmkpIƒ £Wn-®p-sIm-≈p-∂p.
Z¿Lmkv \ºcpw t]cpw AS-¶¬ XpIbpw—
]n1/13/2015-˛16—kn. kn. F^v.- te-°p≈ 1.5 SÆns‚
F kn-—3 FÆw—` 1,80,000.
Z¿Lm-kv ka¿∏n-°p∂ Ih-dn\papI-fn¬ Z¿Lmkv
\º¿ ]n1/13/2015˛16 XobXn 29˛9˛2015 Ch tcJ-s∏-SpØn
Xmsg H∏n´ DtZym-K-ÿ\v 29˛9-˛2015, 3 aWn°v apºv
ka¿∏nt°-≠-Xm-Wv. Xma-kn®p In´p∂ Z¿Lm-kp-Iƒ
]cn-K-Wn-°p-∂-X-√. Z¿Lm-kp-Iƒ 30˛9˛2015-˛\v cmhnse
11 aWn°v Z¿Lm-kp-Iƒ ka¿∏n® Bfp-I-fpsS
km∂n-≤y-Øn¬ B[n-Im-cn-I-ambn Xpd-°p-∂-Xm-Wv.
Z¿Lm-kp-Iƒ Bh-iy-ap-≈-h¿ ` 420 (\n-IpXn
Dƒs∏-sS) hne \¬In Z¿Lmkv t^md-߃ hmtß-≠-
Xm-Wv. 29-˛9-˛2015-˛\v D®bv°v 2 aWn hsc Z¿Lmkv
t^md-߃ hmßm-hp-∂-Xm-Wv. Z¿Lmkv t^m-d-߃
bmsXmcp Imc-W-h-imepw ssIam‰w sNø-p-hm≥
]mSp-≈-X-√. sN°v, {Um^v‰v, t]mtÃPv Ãmºv XpS-ßn-bh
kzoI-cn-°p-∂-X-√. hn. ]n. ]n. Bbn Z¿Lmkv t^md-߃
Ab-bv°p-∂-X-√. Uyq-πnt°‰v Z¿Lmkv t^md-߃
Bh-iy-ap-≈-h¿ Hcp- {]-Xn°v ` 210 (\n-IpXn Dƒs∏-sS)
IqSn AS-bvt°-≠-Xm-Wv (X-]m-¬ hgn ` 260).
Z¿Lmkv \nb-a-a-\p-k-cn®v Z¿Lmkv ka¿∏n-°p-
tºmƒ Z¿Lm-kn-t\m-sSm∏w ` 500 hne-bp≈ tIcf
ap{Z-]-{X-Øn¬ kΩ-X-]-{Xhpw 1% \nc-X-{Z-hyhpw
hbvt°-≠-Xm-Wv. kΩ-X-]{Xhpw \nc-X-{Z-hyhpw C√mØ
Z¿Lm-kp-Iƒ kzoI-cn-°p-∂-X-√. Z¿Lm-kp-Iƒ X]m¬hgn
Bh-iy-ap-≈-h¿ ` 470 aWntbm¿Udmbn {]n≥kn-∏mƒ,
Kh¨sa‚ v F©n-\o-b-dnwKv tImtfPv, shÃv ln¬ ]n. -H.,
tImgn-t°mSv˛673 005 F∂ t]cn¬ Ab-®p-X-tc-≠-Xm-Wv.
tIc-f-Øn\v ]pd-Øp≈ Iº-\n-°m¿°v tIcf ap{Z]{Xw
Bh-iy-am-sW-¶-n¬ Z¿Lmkv t^md-Øns‚ hne-tbm-sSm∏w
` 150 IqSn A[n-I-ambn Ab-bvt°-≠-Xm-Wv.
No. P1/2491/2015.
6th August 2015.
Sealed tenders are invited for the supply of
Chemicals and Glassware for the Chemical Engineering
Department of Government Engineering College,
Kozhikode.
PAC— ` 1,80,000.
Tender No. and name of Item–P1/13/2015-16– ACs for
CCF.
The tenders should be superscribed as Tender
No. P1/13/2015-16 due on 29-9-2015 at 3 p.m. and
addressed to the undersigned to reach him before
29-9-2015 at 3 p.m. Late tenders will not be accepted. The
tenders will be opened at 11 a.m. on 30-9-2015 in the
presence of such of the tenderers or their authorized
representatives who may be present at that time.
Intending tenderers may on application to the
undersigned, to obtain the requisite tender forms on
which tenders should be submitted. Application for the
tender form should be accompanied by a cash remittance
of ` 420 including VAT which is the price fixed for the
same and which is non-refundable under any circumstances.
The tender forms are not transferable. Sale of tender form
will be closed at 2 p.m. on 29-9-2015. Drafts, Cheques,
Postage Stamps etc. will not be accepted towards the cost
of forms, nor will the form be sent per V.P.P. Duplicate
tender forms, if required will be issued at
` 210 including VAT per copy. (By post ` 260).
As per tender condition the tenderer should send
along with the tender an agreement executed and signed in
Kerala Stamp Paper of value ` 500 and an EMD of 1% of
the total cost of the articles tendered. Tenders without
agreement and EMD will be rejected. Those who want the
tender form by post should sent ` 470 including VAT by
Money Order to the undersigned. Outside firms who
desire to get Kerala Stamp Paper should send an additional
amount of ` 550 along with the cost of tender forms.
Govt. Engineering College,
(Sd.)
Kozhikode.
Principal.
Water Transport Department
eLp Z¿Lmkv ]ckyw
\º¿ kn5˛6716/2015.
2015 BKÃv 18.
kwÿm\ PeK-Xm-KX hIp-∏v Be-∏p-gbn-te°v
Xmsg ]d-bp∂ km[-\-߃ kssπ sNøp-∂-Xn\v ap{Z-h®
Z¿Lm-kp-Iƒ £Wn®p-sIm-≈p-∂p.
Z¿Lmkv \º¿—50/kn5/2015-˛16.
kssπ sNtø≠ hkvXp— Hull Plate Sheet,
Angle Iron.
AS-¶¬ XpI—` 3,02,100.
\nc-X-{Zhyw—` 3,021.
Z¿Lmkv t^md-Øns‚ hne—` 630 (\nIpXn
Dƒs∏sS).
Z¿Lmkv
t^mdw
hn¬°p∂
Ah-km\
Xob-Xnbpw ka-bhpw—26˛9˛2015, 1 aWn.
Z¿Lmkv e`n-t°≠ Ah-km\ Xob-Xnbpw
ka-bhpw—26˛9˛2015, 3 aWn.
Z¿Lmkv Xpd-°p∂ Xob-Xnbpw ka-bhpw—
26˛9˛2015, 3.15 aWn.
Z¿Lmkv kw_-‘n® IqSp-X¬ hnh-c-߃ {]hr-Øn-
Zn-h-k-ß-fn¬ sshIp-t∂cw 5 aWn hsc Cu Hm^o-kn¬
e`y-am-Wv. sSe-t^m¨ \º¿ : 0477-˛2252015.
kwÿm\ Pe-K-Xm-KX hIp-∏v
(H-∏v)
Ub-d-IvS-td-‰v, Be-∏p-g.
Ub-d-IvS¿.
416