PART III
Stores Purchase
Gaz. No. 41/2018/DTP (Stores Purchase).
707
©
tIcf k¿°m¿
Government of Kerala
2018
tIcf Kkddv
KERALA GAZETTE
B[nImcnIambn {]kn≤s∏SpØp∂Xv
PUBLISHED BY AUTHORITY
Regn. No. KERBIL/2012/45073
dated 5-9-2012 with RNI
Reg. No. KL/TV(N)/634/2018-20
Xncph\¥]pcw,
sNmΔ
Thiruvananthapuram,
Tuesday
hmeyw 7
Vol. VII
2018 HIvtSm_¿ 16
16th October 2018
1194 I∂n 30
30th Kanni 1194
1940 Bizn\w 24
24th Aswina 1940
}
\º¿
No. } 41
Ayurveda Medical Education Department
Z¿Lmkv ]ckyw
[\º¿ 7/2018-˛19]
\º¿ Fkv˛4609/2018/Fhn-kn-F-®v.
2018 sk]v‰w_¿ 11.-
IÆq¿
Kh¨sa‚ v
Bbq¿thZ
tImtf-Pv
Bip-]-{Xn-bnse em_n-te°v Bh-iy-amb hm´¿
]yqcn-^-b¿/Unkvs]≥k¿-˛-Iw-˛-Iq-f-¿˛-Iw-˛-tlm´v sajo≥
hnXcWw sNøp∂Xn\v ap{Zsh® Z¿-LmkpIƒ £Wn®p-
sIm-≈p-∂p.
aXn∏v sNehv—` 2,00,000.
“kq{]-≠v,- Kh¨sa‚ v Bbq¿thZ tImtf-P-v
Bip-]{Xn, IÆq¿, sa-Un-°¬ tImtf-Pv ]n. H., ]cn-bmcw”
F∂ hnemkØnemWv Z¿Lmkv Abbvt°≠Xv.
Z¿Lmkv Ih-dn\p ]pdØv “IÆq¿ Kh¨sa‚ v
Bbq¿thZ tImtf-Pv Bip-]-{Xn-bnte°v Bh-iy-amb
hm´¿ ]yqcn-^-b¿/Unkvs]≥k¿-˛-Iw-˛-Iq-f-¿˛-Iw-˛-tlm´v
sajo≥v” F∂v tcJ-s∏-Sp-Øn-bn-cn-°-Ww. Z¿Lm-kn¬
hm´¿ ]yqcn-^-b¿/Unkvs]≥k¿-˛-Iw-˛-Iq-f-¿˛-Iw-˛-tlm´v
sajos‚ {_m≥Uv t]cpw kvs]kn-^n-t°-j\pw tcJ-s∏-Sp-
Øn-bn-cn-t°-≠-Xm-Wv. ]qcn-∏n® Z¿Lm-kp-Iƒ 30-˛10-˛2018-˛\v
sshIp-t∂cw 3 aWn°v apºv Hm-^o-kn¬ e`n-®n-cn-°-Ww.
sshIn In´p∂ Z¿Lmkp-Iƒ kzoI-cn-°p-∂-X-√. Z¿Lmkv
hmßn-b-h-cp-sStbm Ah-cpsS AwKo-IrX {]Xn-\n-[n-I-fp-
sStbm km∂n≤yØn¬ 30˛10˛2018˛\v sshIp-t∂cw 3.30˛\v
Z¿Lmkv Xpd°p-∂-Xm-bn-cn°pw. Z¿Lmkv t^md-Øns‚
hne ` 630 + 18% Pn. Fkv. Sn. sS≠¿ tcJIƒ
e`n°p∂Xn\v Pn. Fkv. Sn. HSp°nb ckoXv lmP-cm-t°-
≠-Xm-Wv. t^mdw X]m-en¬ e`n-°p-hm≥ hne-tbm-sSm∏w
` 50 A[n-I-ambn aWn-tbm¿U¿ Abbvt°≠XmWv.
Z¿Lmkv t^md-Øns‚ hne \n›n-Xhpw Hcn-°epw
Xncn®p \¬Im-Ø-Xp-am-Wv. Z¿Lmkv as‰m-cm-fpsS
t]cnte°v am‰m-hp-∂-X-√. Z¿Lmkv t^mdß-fpsS hn¬∏\
Cu Hm^o-kn¬ 14˛9˛2018-˛\v cmhnse 10 aWn- ap-X¬
Bcw-`n-°p-∂Xpw 29˛10˛2018˛\v sshIp-t∂cw 5 aWn°v
Ah-km-\n-°p-∂-Xp-am-Wv. sN°v, t]mì Hm¿U¿,
Unam‚ v {Um^v‰v XpS-ßn-bh kzoI-cn-°p-∂-X-√. t^md߃
hn. ]n. ]n. Bbn Abbv°p-∂-X√. Uyqπn-t°‰v
t^md߃
Bh-iy-sa¶n¬
(`
320
+
18%
Pn. Fkv. Sn.˛°v) e`n-°p-∂-Xm-Wv. ]qcn-∏n® Z¿Lm-kn-
t\m-sSm∏w tcJ-s∏-Sp-Ønb samØw XpI-bpsS
1% \nc-X-{Z-hyambpw (G{dhpw IpdRvXv ` 1,500) ` 200˛s‚
tIcf ap{Z-IS-emkn¬ A∏‚n-Ivkv-˛17 {]Im-c-ap≈ {]nen-an-
\dn F{Kn-sa‚pw ka¿∏n-t°-≠-Xm-Wv. 30˛10˛2018˛\v
16th OCT. 2018]
STORES PURCHASE
1368
k¿°m¿ Ah[n {]Jym-]n-°p-I-bmsW-¶n¬ ASpØ
{]hrØn Znhkw 3.30-˛\v sS≠¿ Xpd-°p-∂-Xm-bn-cn-°pw.
sS≠¿ AwKoI-cn-°mt\m \nc-kn-°mt\m D≈ ]q¿Æ
A[n-Imcw kq{]≠n-\m-bn-cn°pw. IqSp-X¬ hnh-c-߃
Bip-]{Xn Hm-^o-kn¬ \n∂pw {]hrØn Znhk-ß-fn¬ Adn-
bm-hp-∂-Xm-Wv.
[No. 7/2018-19]
No. S-4609/2018/AVCH.
11th September 2018.
Sealed competitive tenders are invited for the supply
of Water Purifier/Dispenser-cum-Cooler-cum-Hot
Machine for Government Ayurveda College Hospital,
Kannur, Pariyaram for the year 2018-19.
Estimate Cost—` 2,00,000.
Tenders should be superscribed “Tender for the
supply of Water Purifier/Dispenser-cum-Cooler-cum-Hot
Machine” addressed to the Superintendent, Government
Ayurveda College Hospital, Kannur, Pariyaram. Last date
of receipt of duly filled tender form is at 3 p. m. on
30-10-2018. Late tenders will not be accepted under any
circumstances. Tenders will be opened at 3.30 p. m. on
30-10-2018 in the presence of the tenderers or their
authorized representatives who may be present at
that time.
Intending tenderers may on application to the
Superintendent, Government Ayurveda College Hospital,
Kannur, Pariyaram to obtain the required tender forms
in which tenders should be submitted.
Cost of original
tender form is ` 630 + 18% G.S.T. Duplicate form is
` 320 + 18% G.S.T. Tender documents will be issued to
the intending tenderer only on the submission of
G. S. T. remittance receipts. Those who wish to purchase
tender form by post should send an additional amount
of ` 50 as postage charge. The price fixed for a tender
form or a set of form is not refundable under any
circumstances. The tender forms are not transferable.
The sale of tender forms will be started at 10 a. m. on
14-9-2018 and will be closed at 5 p. m. on
29-10-2018. Demand Draft, Cheque, Postal Order etc.
will not be accepted towards the cost of tender forms.
A preliminary agreement as per Appendix XVII of Store
Purchase Manual Rules on Kerala Stamp Paper worth of
` 200 together with an EMD of 1% of the total amount
quoted not less than ` 1,500 by a way of D.D. should
be attached with the tender form. The Superintendent,
Government Ayurveda College Hospital, Kannur,
Pariyaram has the right to accept or reject the tender.
If 30-10-2018 will be declared as a public holiday, the
tender will be opend at 3.30 p. m. on the next working
day. Those who wish to purchase tender form by post
shall obtain the forms early so as to avoid postal delay.
Further details can be had from the Hospital Office
during the office time.
Office of the Superintendent,
Government Ayurveda College Hospital,
(Sd.)
Kannur, Pariyaram.
Superintendent.
Central Prisons and Correctional Home
Kannur
Z¿Lmkv ]ckyw
\º¿ Fw˛5/2018-˛19.
2018 sk]v‰w-_¿ 27.
IÆq¿
sk≥{S¬
{]nk¨
&
Id-£-W¬
tlmante°v sk£W¬ hm¿∏nwKv sajo\pw a‰v
A\p-_‘ D]-I-c-W-ßfpw anX-amb- \n-c-°n¬
hnX-cWw sNøp-∂-Xn\v sS≠-dp-Iƒ £Wn-®p-
sIm-≈p-∂p.
]´nI
{Ia
C\
FÆw
kvs]kn-^n-t°j≥
\º¿
hnhcw
1
sk£-W¬ hm¿∏nwKv
1
{Uw \ofw—85"
sajo≥ (lm‚ veqan\pw
{Uw Np‰-fhv—2 ao‰¿
]h¿eq-an\pw D]-tbm-Kn
{Io≥ Afhv—200
-°m≥ ]‰m-hp∂-Xv)
tIm¨ tlmƒUv
sNøm-hp-∂Xv
tamt´m¿—1 HP
2
k¿°p-e¿ t]¨ssh‚nwKv 1
kv]n‚n¬
sajo≥
I∏m-kn‰n—24 FÆw
t]¨ Afhv—7"
tamt´m¿—1 HP
3
lmIvSp t_m_n≥
1
kv]n‚n¬
ssh‚nwKv sajo≥—
I∏m-kn‰n—12 FÆw
(Single Side)
t_m_n≥ Ãm‚ v—
200 FÆw. tlmƒUv
sNøm-hp-∂Xv
t_m_n≥ Afhv—
6" × 3"
Imen t_m_n≥—
100 FÆw
(Single Colour)
AS-¶¬ XpI—` 3 e£w.
\nc-X-{Zhyw—` 7,500.
sS≠¿ t^md-Øns‚ hne (Including G. S. T.) :
Hdn-Pn-\¬—` 710.
]I¿∏v—` 355.
sS≠¿ t^md-Øns‚ hn¬∏-\-bpsS Ah-km\
Xob-Xnbpw ka-bhpw—29-˛10-˛2018 D®bv°v 1 aWn.
sS≠¿ t^mdw e`n-t°≠ Ah-km\ Xob-Xnbpw
ka-bhpw—5-˛11˛2018 sshIp-t∂cw 3 aWn.
sS≠¿ Xpd∂v ]cn-tim-[n-°p∂ Xob-Xnbpw
ka-bhpw—5˛11-˛2018, 4 aWn.
708
16th OCT. 2018]
STORES PURCHASE
1369
sS≠¿ t^md-߃ Hm^okv ka-b-ß-fn¬ hne
]W-ambS-®m¬ IÆq¿ sk≥{S¬ {]nk¨ & Id-£-W¬
tlman¬ \n∂pw e`y-amIpw. “sk£-W¬ hm¿∏nwKv
sajo≥
A\p-_‘
D]-I-c-W-߃
hnX-cWw
sNøp-∂-Xn-\p≈ sS≠¿” F∂ tase-gp-tØmSp
IqSnb ap{Z-sh® Ih-dp-I-fn¬ kq{]-≠v, sk≥{S¬
{]nk¨ & Id-£-W¬ tlmw, ]≈n-°p∂v ]n. H.,
IÆq¿ F∂ hnem-k-Øn¬ kv]oUv t]mtÃm,
cPn-tÿUv t]mtÃm Bbn sS≠-dp-Iƒ ka¿∏n-°m-hp-∂-
Xm-Wv.
kq{]≠m^okv, sk≥{S¬ {]nk¨ &
Id-£-W¬ tlmw,
(H-∏v)
IÆq¿.
kq{]-≠v.
Collegiate Education Department
Z¿Lmkv ]ckyw
\º¿ F1˛657/2018˛19(]n).
2018 sk]v‰w-_¿ 14.
Xncq¿ Sn. Fw. Kh¨sa‚ v tImtf-Pnte°v 2018˛19
kmºØnI h¿j-Øn¬ πm≥ ]≤Xnbn¬ em_v
sse{_dnIfpsS hnIk\w F∂ io¿jIØn¬ Cu
tImtfPnse ^nknIvkv em_nte°v ` 2,00,000˛\v
em_v D]-I-c-W-߃ hnX-cWw sNøm≥- Xøm-dp-≈-h-cn¬
\n∂pw ap{Z-h® a’-c-kz-`m-h-ap≈ Z¿Lm-kp-Iƒ £Wn-®p-
sIm-≈p-∂p.
Z¿Lm-kp-Iƒ AS°w sNbvX Ih-dn\p apI-fn¬
“Z¿Lmkv t\m´okv \º¿ F1/657-˛2018˛19(-]n)/em_v/
sse{_dnIfpsS hnIk\w” F∂ io¿jIØn¬
“^nknIvkv
em_nte°v
em_v
D]IcW߃
hnXcWw sNøp∂Xn\p≈ Z¿LmkpIƒ” Fs∂-gpXn
{]n≥kn-∏mƒ, Sn.- Fw. Kh¨sa‚ v tImtf-Pv, Xncq¿,
hm°m-Sv ]n. H., ae∏pdw Pn√, tIcfw, ]n≥˛676 502
F∂ hnem-k-Øn¬ Ab-bvt°-≠-Xm-Wv. Z¿Lm-kp-Iƒ
kzoI-cn-°p∂ Ah-km\ XobXn 26-˛10˛2018˛\v D®bv°v
tijw 2 aWn-hsc BIp-∂p. Z¿Lm-kp-Iƒ At∂
Znhkw D®bv°ptijw 3 aWn°v lmP-cmbn´p≈
Z¿Lmkp-Im-cp-sS km∂kn-≤y-Øn¬ Xpd∂v ]cn-tim[n-
°p-∂-Xm-Wv. Z¿Lmkv t^md-Øns‚ hn¬∏\
26-˛10-˛2018,-
12.30-˛\v
Ah-km-\n-°p-∂-Xm-Wv.
sshIn In´p∂Xpw A]q¿Æ-hp-amb sS≠-dp-Iƒ
bmsXmcp Imc-W-h-imepw kzoI-cn-°p-∂-X-√. Z¿Lmkv
t^mdw e`n-°p-∂-Xn\v Z¿Lmkv t^mdØns‚ hnebmb
` 672 (sS≠¿ t^mdØns‚ hne ` 600˛w Pn.Fkv.Sn. 12%
Dƒs∏-sS) AS-bvt°-≠-XmWv. Z¿Lmkv t^md-Øns‚
hne bmsXmcp Imc-W-h-imepw aS°n \¬Ip-∂-X-√.
Z¿Lmkv t^md-߃ ssIam‰w sNøm≥ ]mSp-≈-X-√.
Z¿Lmkv t^md-Øns‚ hne-bmbn sN°p-Iƒ, t]mì
Hm¿U-dp-Iƒ, t]mì Ãmºp-Iƒ F∂nh kzoI-cn-
°p-∂tXm Z¿Lm-kp-Iƒ hn. ]n. ]n. Bbn Ab-®p
-sIm-Sp-°p-∂tXm A√. Z¿Lmkv t^mdw X]m-en¬ e`n-°p-
∂-Xn\v Z¿Lmkv t^md-Øns‚ hnebpw X]m¬ Nm¿÷pw
Dƒs∏sS ` 722 aWn Hm¿U¿ Ab®pXtc-≠-Xm-Wv.
]qcn-∏n-®Xpw H∏n-´-Xp-amb Z¿Lmkv t^mdØns‚
IqsS \nc-X-{Z-hy-ambn BsI XpI-bpsS 1% XpIbv°v
(an-\n-aw ` 1,500) {]n≥kn-∏m-fns‚ t]cn¬ Xncq¿
Fkv._n.-sF. {_m-©n¬ amdm-hp∂ Xc-Øn¬ Unam‚ v
{Um^v‰v AS°w sNtø-≠-Xm-Wv. \nc-X-{Z-hy-Øn\v
]eni \¬Ip-∂-X-√. Hmtcm D]-I-c-W-Øn-s‚bpw hne,
\nIpXnIƒ, a‰p sNe-hp-Iƒ hniZhnhcw t{_mj¿
klnXw F∂nh {]tXyIw ImWn-t°-≠-Xm-Wv. hnX-cWw
sNøp∂ km[\ kma{KnIfpsS hmd≠n/k¿Δokv
hyhÿIƒ {]Xn]mZn®ncn°Ww. hnXcW DØ-chv In´n
Hcp amk-Øn-\p≈n¬ D]-I-c-W-߃ kz¥w sNe-hn¬
tImtf-Pn¬ FØn-t°-≠-Xm-Wv. hne\ne-hm-c-Øn\v
31-˛3˛-2019 hsc {]m_eyap≠m-bn-cn-°p-∂-Xm-Wv.
Hmtcm sS≠-dns‚ IqsSbpw ` 200 hne-bp≈
tIcf ap{Z-]-{X-Øn¬ Icm¿ FgpXn ka¿∏n-t°-≠-Xm-Wv.
\nc-X-{Zhyw AS-bv°p-∂-Xn¬ \n∂pw Hgn-hm-°n-bn-´p≈
ÿm]-\-߃ DØ-c-hns‚ icn-]-I¿∏v Z¿Lm-kns‚ IqsS
AS°w sNtø-≠-Xm-Wv. bmsXmcp ap∂-dn-bn∏pw IqSmsX
Z¿Lmkv \S-]-Sn-Iƒ d±m-°p-∂-Xnt\m \o´nhbv°p-∂
-Xnt\m D≈ A[n-Imcw Xmsg H∏n-´n-´p≈ Bfn¬
\n£n-]vX-am-Wv. Hm^o-knse ]W-an-S-]mSv kabw
cmhnse 10 aWn apX¬ D®-bv°v- 2 aWn-h-sc-bm-Ip-∂p.
IqSp-X¬ hnh-c-߃ B^okv {]hrØn ka-bßfn¬
t\cn´v At\z-jn-®m¬ e`n-°p-∂-Xm-Wv.
No. A1-657/2018-19/(P). 14th September 2018.
Sealed competitive tenders are invited for the
supply of Lab Equipments to Physics Lab of
T. M. Government College, Tirur for a total cost of
` 2,00,000 under the scheme of Development of Lab
and Library 2018-19 (Plan).
The envelope containing the tender should be
superscribed as “Tender No. A1/657/2018-19(P) Supply
of Lab Equipments to Physics Lab under the scheme of
Development of Lab and Library 2018-19 Plan” and
addressed to “The Principal, T. M. Govt. College, Tirur,
Vakkad P. O., Malappuram Dist., Kerala, Pin-676 502”.
The last date and time for receipt of filled tender is at
2 p. m. on 26-10-2018. The tenders will be opened at
3 p. m. on the same day in the presence of such
tenderers or their authorized representatives who may be
present at that time. Sale of tender form will be closed
on 26-10-2018 at 12.30 p. m. Late tenders will not be
accepted at any account.
Intending tenderers may make an application to the
Principal to obtain the requisite tender form, in which
tenders should be submitted. The original tender form
dully filled and signed only will be accepted.
Application for the tender form should be accompanied
by a cash remittance of ` 672 (cost of tender for
` 600 + GST 12%) which is the price fixed for a tender
form and which is not transferable. Cheques, Postal
Orders and Postal Stamps will not be accepted towards
the cost of tender form and the tender form will not be
709
16th OCT. 2018]
STORES PURCHASE
1370
sent by V.P.P. Those who require tender form by
Registered Post should sent the cost of tender form
` 722 including postal charges for registered post by
Money Order. Every tender should be accompanied by an
agreement in Kerala Stamp Paper worth ` 200.
The articles should be supplied within one month on the
receipt of the purchase order to the college at your own
expenses.
The period of firmness of rate quoted will be up to
31-3-2019. Rates, G.S.T. and condition of supply of
articles should clearly be stated separately in respect of
each item.
The tenders should be accompanied by an EMD of
1% (Minimum ` 1,500) of the total cost in the form of
Demand Drafts drawn in favour of the Principal,
T. M. Govt. College, Tirur, payable at SBI, Tirur Branch
only. Tenders without sufficient EMD are liable to be
rejected. EMD will not carry any interest. The firm who
are exempted from furnishing EMD should be enclosed
the attested copy of exemption orders. More details can
be had from the college office during working days.
The undersigned will have the right to cancel or
extend the tender formalities at any time without
further notice. Cash hours of the office will be 10 a. m.
to 2 p. m. in all working days.
T. M. Govt. College,
(Sd.)
Tirur.
Principal.
Fire and Rescue Services Department
e-TENDER NOTICE
No. M1-9220/2018.
17th September 2018.
e-Tenders in two cover system are invited from competent manufacturers or their authorised dealers with
adequate stock and spares and repair capabilities for the supply of 25 numbers of First Respose Vehicles Set as per the
specifications of this Department. The tender is to be submitted as e-tenders through https://etenders.kerala.gov.in
Since this is an e-tender, only those bidders who have enrolled in the above portal with their own Digital Signature
Certificate (DSC) can participate in the tender.
e-Tender document and other details can be obtained from the above e-portal.
The tender has two parts.
1.
Technical Bid.
2.
Financial Bid (BOQ).
Tender No. with PAC—KFRS-E-Tender No. 03/2018-19/SN—` 750 Lakhs.
EMD—1% of PAC in online payment.
Cost of e-tender (online submission)—` 29,500 (` 25,000 + GST @ 18%).
Date of pre bid meeting—25-9-2018, 11 a. m.
Closing date and time of e-tender—17-10-2018, 4 p. m.
Last date and time of receipt of e-tender—17-10-2018, 4 p. m.
Date of Presentation and evaluation—24-10-2018, 2.30. p. m.
Date and time of opening of e-tender:
1.
Technical Bid—24-10-2018, 11 a. m.
2.
Financial Bid—25-10-2018, 11 a. m.
Date upto which the rates are to remain firm for acceptance—31-3-2019.
Security Deposit—5% of total contract amount. To be furnished as bank guarantee of a nationalised or scheduled
commercial bank.
Period of supply—Within 90 days of from the date of supply order.
710
16th OCT. 2018]
STORES PURCHASE
1371
The bidder desiring to take part in the bid shall log into https://etenders.kerala.gov.in and then select tender and
make the payment. Bidders will be directed to the payment gateway page of the State Bank of India. There are two
options-State Bank of India Net banking payment, payment through NEFT from other banks to the payment
gateway of SBI.
For obtaining digital signature certificate (DSC) and necessary portal enrollment bidders can visit the website
https://etenders.kerala.gov.in.
Tenders will be opened online in the presence of such tenderers or their authorized representatives who have
logged in before the prescribed time of opening of technical & financial bids. If the date fixed for opening happens to
be a holiday/due to internet failure the tenders will be opened in the next working day, at the same time.
The tenderer, or his representative, shall be physically present at the Fire and Rescue Services Headquarters on
the date prescribed, with the necessary documents and presentations on all the technical aspects of the equipment and
accessories for the total understanding and verification of the technical committee.
The price of the e-tender form shall be received only through online payment SBI/SBI NEFT.
The cost should be quoted in Indian currency only.
The tender has two covers:
•
Technical cover
•
Financial cover
The first cover i.e., the technical cover shall be uploaded with the following documents.
1.
Scanned copy of Departmental Technical specification of the product intended to supply duly signed and stamped
by the bidder.
The Bidder should sign, stamp and upload the Departmental Technical Specification as such, along with the tender.
Uploading the Duly signed and stamped Departmental Technical Specification will be treated as the applicant is ready to
supply the product as per the Departmental Technical Specification without any deviation.
In case of any deviation from the Departmental Technical Specification, the bidder shall fill and upload
Specification Compliance Statement in the following proforma, clearly marking the details of deviation. The committee
will check the admissibility of the deviation mentioned by the bidder and the tender will be admitted only if the deviation
proposed by the bidder is acceptable for the Departmental Technical Committee. Deviations, if any, shall be strictly
marked in the Specification Compliance Statement itself. If the applicant uploaded the Specification Compliance
Statement and no marking is made in the column provided for marking deviation in the statement, it will be treated as
the applicant is ready to supply the product as per the Departmental Technical Specification without any deviation.
Specification Compliance Statement for First Response Vehicle
Sl.
Details of Departmental
Details of the product offered
Deviation from Departmental
No.
Technical Specification
Technical Specification, if any
2.
Scanned copy of the agreement in the prescribed format in Kerala Stamp Paper worth ` 200.
3. Brochure of the product intended to supply.
4. Work experience certificate, O. E. M. Authorisation Letter and other relevant details.
5. Scanned copies of the declaration by the bidder on Kerala Stamp Paper worth ` 200 to the effect that no
Vigilance Case has been charge sheeted and pending trial at Court against him/his partner/s or any of his
directors in connection with fabrication/supply of similar product made earlier to this department.
I, ................... (Name, Address, firm), do hereby declare that no Vigilance Case have been charge sheeted and
pending trial at court against me, any of my partner/s or any of my directors, in connection with fabrication/
supply of similar product made earlier to Kerala Fire and Rescue Services Department/Government of Kerala and
none of us or our firm is blacklisted by any Government agencies/PSUs in Kerala.
711
Gaz. No. 41/2018/DTP (Stores Purchase).
16th OCT. 2018]
STORES PURCHASE
1372
Pre-bid meeting
A pre bid meeting will be held at Fire and Rescue Services Headquarters, Thiruvananthapuram on the date and
time as mentioned above. Bidders can participate in the pre bid meeting and clarify their doubts, if any. They can clarify
their doubts by sending an e-Mail to [email protected] and by contacting The Divisional Officer, Fire and Rescue
Services, Thiruvananthapuram in phone number 09497920101.
Tender Opening and evaluation
(a) Soon after the opening of the tender, the tenderers are requested to come to the Fire and Rescue Services
Headquarters with documents and presentations.on all the technical aspects of the equipment and accessories for the full
understanding of the Head Office Purchase Committee (Technical), on the date specified.
(b) There will not be any further communications about the opening of the technical and financial bids
separately. Soon on opening the technical bid of e-tenders, the committee constituted to evaluate the technical aspects,
will meet and scrutinize the technical specification of equipment submitted with the e-tender.
(c) During evaluation, the tenders will be first evaluated for the compliance of Departmental Technical
Specification. Only those tenders which comply the Departmental Technical Specifications will be considered for
subsequent financial evaluation.
(d) Those bidders who can comply with all the requirements and conditions of the tender only need to
participate in the tender. Any special condition uploaded by the bidder will not be considered for evaluation.
(e) The financial bid belonging to those dealers/suppliers who qualified in the technical bid of the equipment
as required above by Kerala Fire & Rescue Services Department alone will be considered.
(f) On finalization of technical evaluation, the second cover i.e., the financial bid of the concerned competent
firm will be evaluated by the Head Office Committee (Finance) for consideration.
The bidder should upload the supporting documents along with the Technical cover.
(g) The originals of Technical Specification Compliance Statement of the product, agreement in Kerala Stamp
Paper worth ` 200, the declaration on Kerala Stamp Paper worth ` 200 and the Brouchers/Photograph of the item
intended to supply, OEM Authorisation Letter and other documents shall be produced before the undersigned soon after
the financial Bid opening.
(h) After opening the financial bid, financial evaluation will be done and the details will be uploaded in the
financial evaluation field of the e-tender site, only after consultation with the DPC. The decision of the DPC shall be
final on the admissibility of the tender and thereafter awarding of the contract.
(i) The right of acceptance or rejection of e-tender or cancelling the tender without assigning any reason,
at any stage of tendering, is solemnly vested with the Director General, Kerala Fire and Rescue Services, or a
committee appointed by him.
The rules and regulations prescribed for e-tenders by the Government of Kerala/Store Purchase Manual,
Government of Kerala shall be applicable to this e-tender also. If any tenderer wants any clarification on any aspect of
the tender, he/she can send e-mail to [email protected] or Fax to 0471-2337422.
Details with respect to the e-tender and the details of specifications of the item to be purchased can be obtained
from the e-tender website https//etenders.kerala.gov.in.
Any legal dispute that may arise in relation to the e-tender formalities will be restricted to the jurisdiction of
Thirivananthapuram District Court.
DETAILED TECHNICAL SPECIFICATION FOR THE FIRST REPONSE VEHICLE
l. General
The First Response Vehicle shall be fabricated on the chassis with the specification mentioned below. First
Response vehicle shall be designed to efficiently carry 3 crew members including the driver and equipments.
712
16th OCT. 2018]
STORES PURCHASE
1373
2. Chassis
Chassis shall be supplied by the. Department with the following specifications:
Details of Chassis
Wheel Base
—
Not Less than 3100mm
Length
—
Not Less than 5100mm
G. V. W.
—
Not Less than 2900 Kg.
Pay load
—
Not Less than 1000 Kg.
Power
—
Not Less than 75 bhp
Torque
—
Not Less than 220 Nm
Steering
—
Power assisted steering, tiltable type
Fuel tank capacity
—
Not Less than 55 litre
Suspension
—
Front—Double Wishbone Type with Torision Bar,
Rear-leaf Springs
Wheels & tyres
—
Radial tubeless
Preferable make : MAHINDRA IMPERIO/TATA XENON or similar make
The overall weight of the fabricated vehicle with water, Foam Compound, equipments and crew members should
not be above the rated GVW of the chassis.
3. Description
The vehicle shall comprise of the following equipments:
Sl. No.
Items
Quantity
Remarks
3.1
Water mist system
1 No
Specification appended
3.2
Hydraulic Rescue Tool
1 No
Specification appended
(Power pack and Combi tool only)
3.3
Chain saw (Petrol engine operated)
1 No
Power output : Not less than 3.9 Kw
Chain Bar Length : 400mm
Weight : Not more than 6.6 Kg.
Spare chain : 3 numbers
Preferable make : STIHL MS381
3.4
LED Torch (Rechargeable)
2 Nos.
Bulb 3W
Range above 1500 mtr,
Battery : Ni — Cad — not less than
7000 mAh
Body : Aircraft aluminium alloy
3.1 Water Mist Fire Fighting System
The water mist fire fighting system shall have a filling volume of 400 litres of Water and 50 litres of Foam
(Total 450 ltrs. maximum). It should be designed to be mounted on most standard pickups and other small vehicles.
It should have minimizing the water and other collateral damage in comparison to conventional water tender. The Unit
design shall incorporate foam induction system which provides foam dosing and suction of water from an external
source for direct fire fighting or filling of the tank.
The fire fighting unit should have an approval/certification from an international testing, supervision &
certification organisation for fire extinguishing media and equipment for class A and B fires (VdS/CNPP/MPA).
713
16th OCT. 2018]
STORES PURCHASE
1374
Specification/Details of the Unit
Weight of empty Unit ......................................
150 kgs. (Max.)
Max. Measurements of the unit (in mm) ......
As compact as possible
Usable Water capacity ......................................
400 ltrs.
Usable Foam capacity ......................................
50 ltrs
System..................................................................
12V electrical system
Gear Box..............................................................
Reduction type
Pump.....................................................................
Triplex high pressure plunger type
Connection for external water supply to unit......
Storz coupling
Frame work of the unit......................................
Stainless Steel with carrying handles
Standard tool set.................................................
Micro nozzle removing tool, spanners
No. of deliveries ...............................................
1 or 2 Nos.
(If the system is provided with 1 Delivery, it
shall be capable of discharging both foam and
water mist.)
Main Extinguishing Gun
The gun shall be provided with a suitable stainless steel filter. The design of gun shall be such that there is no
appreciable re-coil pressure. If the system is provided with double delivery, the second delivery shall have an attachment
for discharging foam with suitable aeration facility. The Gun should have a Handle, should be provided with facility to
adjust the flow rate, High pressure ball valve with locking lever to select the type of jet. The gun should be robust to
change the spray pattern during operation of the unit. The nozzle head of the gun should have several very fine fog
nozzles and one central fog nozzle.
The Main extinguishing Gun shall be capable of producing following spray patterns:
(a)
Very Fine Water Fog
(b)
Combination of very fine water fog (for protecting the operator from heat exposure) and broad centre
jet of fog.
(c)
Combination of very fine water fog and narrow central jet of fog.
(d)
Central jet of fog.
(e)
Full jet.
Flow rate .........................................................
7-25 LPM
Weight of extinguisher gun .........................
4 kgs Max.
Gun Dimensions ...........................................
As compact as possible.
Working pressure on the nozzle .................
100 to 120 bars
(with Nominal réactión.)
Throw.....................................
Jet —not less than 14mts. (+/- 10%)
Spray: not less than 6m (+/- 10%)
Hose reel ............................
60mts (std) on manual Drum with extension of 30m.
The water mist micro nozzle used in the gun should be tested for conductivity up to minimum 30KV and test
certificate for the same needs to be submitted along with the technical bid Preferably Rosenbauer/AFT/Fogtec or similar
reputed make.
714
16th OCT. 2018]
STORES PURCHASE
1375
Main Pump
The pump should be capable of suction of water from tank or open source and to maintain adequate discharge
rate and pressure for operation of nozzle at optimum efficiency.
Working Pressure ......................................
Should not be less than 120Bars.
Flow Rate ...................................................
20-25 LPM
Engine
Preferably Honda/Vanguard/Briggs & Stratton or any other reputed make.
The prime mover for pump shall be 4-stroke Petrol driven engine and shall have compatible electrical and
lubrication system. The engine should preferably start on 12V battery, for which adequate charger shall also be provided.
Suitable system shall be provided on the body of engine/panel for indicating fuel level, battery and temperature.
Power of the engine ...........................
Not less than 15 BHP, 2 Cylinder 4 Stroke OHV
Fuel ........................................................
Unleaded Petrol
Fuel Tank ..............................................
approx. 5.5 litres
Fuel Consumption.................................
approx. 3.5 litres/hr
Starter ....................................................
Electric starter and Pull cord over-ride
Fuel Level Indicator ............................
Mechanical
Control Panel on the unit frame
Control panel should have following provisions:
- Ignition switch and starter button
- Emergency stop switch
- Pressure Gauge
- Battery charge indicator
- Oil pressure control
- Choke
- Hour meter
Foam Induction
A suitable means shall be provided for induction of foam from tank so that proportion for single or double
delivery remains constant and foam quality is maintained.
Size of foam tank.........................
50 lts (Min)
Max. induction .............................
6% (adjustable)
Accessories
Foam Compound AFFF (50 ltrs filled in the foam tank)
Tool kit : comprising of 1 No. adjustable spanner 12"—1 No. Plier—1, Set of double end spanners—1
screw driver set —1, foam nozzle and other special tools as per the requirement of the unit.
Design & Development:
Equipment details:—The Water Mist Fighting System will be a self driven fire fighting unit operated with inbuilt
Petrol Engine coupled to a pump and attached with a reducer & hose pipes, Mist/Foam generating Guns.
The water mist system shall be capable of carrying 400 litres of water and Foam tank of 50 litre made of GRP
in suitable shape to keep the gravity centre of the vehicle as low as possible. For Foam Compound a separate system to
pump and mix the required ratio, which can be discharged.
The discharge gun shall be of light weight stainless steel nozzle capable of producing Water Mist with the ability
to control the discharge in short burst and long shots.
715
Gaz. No. 41/2018/DTP (Stores Purchase).
16th OCT. 2018]
STORES PURCHASE
1376
The size of mist particle shall be in the range of 10 to 100 microns for several fog nozzles which are mounted
on the nozzle head other than the central jet. Valid proof for the same should be attached (Droplet Spectrum of micro
nozzles).
A suitable pressure reducer with a safety.valve, capable of reducing to a low pressure not more than 150 bars &
jerk free working pressure shall be incorporated. The main vessel shall be corrosion free.
The foam required shall be aqueous film forming foam (AFFF).
The unit shall have adequate provisions for safety of the system.
Safety Devices
The following safety device shall form part of equipment:
I
The system shall be provided with pressure safety valve.
II
The system will have proper heat & exhaust outlet for the engine without causing any interference to
the operator while operating the unit. (exhaust pipe must be extended outside the fabricated body).
III Any other safety device which is felt necessary to be a part of the equipment.
Main Water Tank
The water tank of the Water Mist System shall be made of GRP for giving a corrosion free life and making
system lightweight, having useable storage capacity of 450 Litres (400 for water and 50 litres capacity for foam).
The tank should be properly baffled into segments to reduce water surge. The thickness of the water tank should be
minimum 5mm. A man hole of φ 330 mm with overflow pipe and an optical water level indicator should be part of the
tank. The refilling inlet unit of both water tank and foam tank should have minimum 63 mm φ with threaded cap, and shall
be arranged in such a way that, both the tanks are easily refillable. The mounting of the tank should be in such a way
that it should maintain optimum stability of the vehicle on loaded condition.
Hoses
The hoses provided in the system shall be high quality and shall be capable of holding the temp. ranges
-20º to + 55º C. The material specification, working pressure, test pressure and cracking pressure should be indicated
for each type of hose. The length of hose should be 90 M (60 metre + 30 metre). The hose should be flame resistant.
The seals and O-rings used in the system should be of synthetic material like Nitrile rubber or equivalent.
Test of acceptance of fire fighting system
Physical dimensions, performance & weight check of equipment as given under different items shall form part of
test of acceptance.
Conductivity test certificate of the GUN min. 30KVA. (International third party approval for the unit from VdS/
CNPP/MPA should he produced).
3.2 Hydraulic Rescue Tool Set
General Requirement
•
The Hydraulic Rescue tools shall be portable and light-weight, and shall be suitable to use by one man.
The Hydraulic Rescue tools shall be supplied in set form, consist of main equipment like Combi tool,
hoses, and power pack along with all the accessories.
•
The Hydraulic Rescue tools and its accessories shall comply with all the requirements stipulated under
EN 13204 or equivalent national/international standards (Certificates to be produced).
•
For the safety of the operators, victims and bystanders, the tools shall be powered by non-toxic, mineral
based hydraulic oil. Any toxic fluid shall not be used.
•
All pressure hoses shall have a safety factor of not less than 4 times the maximum working pressure.
All hoses shall be provided with anti kink springs with the non-kinking one hose system.
•
All tools, hoses and pumps shall be equipped with compact, non-drip, quick-connect couplings fast and
easy connection. All female couplers shall be equipped with automatic self-locking to prevent accidental
disconnection. The couplers would have 360 degrees free movement for easy uncoiling.
716
16th OCT. 2018]
STORES PURCHASE
1377
•
The hydraulic rescue tools shall be designed to withstand a test pressure of two times their maximum
working pressure. Each tool has to be equipped with two internal safety valves for protection against any
type of mechanical or hydraulic overload for each cylinder and each tool shall have a separate safety valve
for protection against overpressure, in case one of the return couplers is disconnected.
•
All hydraulic rescue tools shall be equipped with automatic devices to hold any load in any position when
the control valve is in neutral position or in cases of disconnected couplers or sudden pressure drops.
•
Hydraulic rescue tools shall be provided with, double acting hydraulic cylinder with a dead man’s type
control and shall be able to operate with one hand by the operator in any position.
•
The tools shall be provided with one hose having pressure line and return line within the same hose.
The hoses shall be fitted in the centre of the control handle through a mono coupling, to avoid personal
harm in case of leakage. The hose shall allow full 360º rotation and shall be equipped with anti-kink
springs over the entire length.
•
The tool body, yokes, and spreader arms shall be made out of high quality aluminium alloy for solid
construction with low weight. All aluminium alloy parts shall be Anodised as a protection against
corrosion and scratching. All hinge pins, levers and cutter blades shall be made out of high tensile (heat
treated) tool steel and blackened as protection against corrosion.
•
The construction of the tool should be so as to allow its use under water for long periods without the risk
of any material damage to any part of the tool.
•
Chain attachment with accessories from the OEM should be supplied with tool set.
•
All hydraulic tools, pumps, hoses and accessories would be fully operational for longer periods at
temperatures ranging from-5° to 50°C
•
The tools shall be supplied with proper operation/safety instruction manuals (in English), according to the
CE, NFPA or equivalent standards. Operation and safety instructions shall be on the tools and shall be in
pictogram style so that they can be understood by all operators easily.
The tools should be as follows:—
HYDRAULIC POWER PACK (PETROL ENGINE OPERATED)
•
The petrol driven hydraulic power pack shall be capable of powering tools independently and have
connection possibility for additional tools. For this purpose the pump shall be provided with separate
connecting valves, incorporating a manually operated pressure release valve. The valve shall have two
positions, operation or neutral. Even when under full pressure the release valve should be easy to operate
and to release the pressure. The hydraulic pump shall be driven by a 4-cycle, single cylinder, air cooled
petrol engine. The power of the engine shall be sufficient to drive the hydraulic pump to give output
sufficient to operate the two tools simultaneously without reduction in the speed.
•
The petrol tank capacity shall be such that, it shall allow the engine to run for minimum one hour when the
tools are in continuous operation.
•
The starting system of the engine shall be hand recoil type and the starting rope shall wound automatically
in, when released.
•
The engine and the pump shall be mounted on suitable tubular carrying frame with integrated carrying
handle.
•
Suitable gauges shall be provided to find out the quantity of fuel and hydraulic oil in the power pack, and
same shall be easily accessible. The provision shall also be made to refill the petrol and hydraulic oil
through wide filling opening which shall be covered with threaded cap.
•
All the hot parts of the power pack shall be properly shielded to avoid possibility of injury to the operator.
•
All the controls on the power pack shall be easily accessible and properly labelled in English language.
•
The weight of the power pack including hydraulic oil and fuel shall not be more than 30 kgs.
•
The power pack shall be provided with 2 or 3 stage-axial/radial piston pump. Each pump shall be
protected with internal safety valves for factory set at a suitable maximum pressure.
717
16th OCT. 2018]
STORES PURCHASE
1378
•
The capacity of hydraulic oil tank shall be sufficient to operate two tools (including RAMS)
simultaneously.
•
High quality ‘Thermo Plastic’ hose of 10 mtrs in length for pressure and return line with quick connect
couplings suitable to connect power pack and tools shall be supplied with the pump.
•
Other requirement shall be as given in the table bellow:
Engine—Petrol engine
Pump—2 or 3 stage Axial/radial piston Pump
No. of tools to be operated simultaneously—Min. Two
No. of tools that can be connected—Min. Two
Combi Tool
The Combi Tool shall be double acting hydraulically operated device, of light weight construction made of
anticorrosive high strength material capable of being lifted, and operated manually with ease. The Combi Tool shall be
provided with spreading tips made of fully hardened, high tensile tool steel with proper serrations outside and inside for
a perfect grip during spreading as well as squeezing operation. The tips shall be mounted on the arms by means of a
quick locking system. This quick lock system shall provide the possibility to change the spreading tips for cutting tips
or pulling adaptors with single hand without loosening any parts and without the need for extra tools.
Cutting force—Not less than 800 KN
Spreading distance—Not less than 400 mm
Weight—Not more than 20 Kg.
The performance rating of the equipment shall conform to NFPA A7, B9, C7. D9 & E9 of
6.13.1 of NFPA 1936 or equivalent standards.
Tool Kit, Oil & Instructions
Necessary tool kit along with first fill of oil and operating manual should be supplied with each set of Hydraulic
Rescue Tool. Additional 1 litre of Hydraulic Oil, for each rescue tool set should be provided by supplier.
Body Work of Vechicle
The rear body structure/frame work shall be of welded constructions and made from 2mm thick MS pressed
sections and square tubes. The Angles and channels used shall be of min. 3mm thickness. The complete structure
material shall be treated for anti corrosion by Zinc Plating. The plating thickness shall not be less than.20 microns. Two
coats of Epoxy paint shall be applied to the completely welded structure.
The structure shall be so designed so as to avoid any vibration/rattling/deformation in the intended usage of the
vehicle.
The interior panelling shall be done from 1.22mm thick aluminium sheets & the exterior panelling shall be done
from 1.60mm thick aluminium sheets. Floor vinyl mat should be provided to the cabin. Rexine Seat cover to be
provided.
The load body of vehicle should not be fabricated beyond 50 cm in height, from height of the roof top of the
cabin, as the height increases the body roll will also increases. Aerodynamic deflector to be provided to reduce the air
resistance. Shape of the fabricated body should be in tune with the design of the original cabin.
Lockers
The lockers should be provided for storage of all equipments mentioned in the specification. All equipments
should be stowed very scientifically & systematically in the lockers & each piece of equipment shall have its designated
location so that at the time of emergency the required equipment can be located very easily & removed for use. Floor
of lockers shall be covered with good quality neoprene rubber sheets.
All the equipment should be properly clamped and strapped in the lockers to prevent shifting of the equipments
while the vehicle is in motion.
718
16th OCT. 2018]
STORES PURCHASE
1379
All the lockers should be covered (Rear side also) with Push-Pull type aluminium roller shutters only, for faster
& smoother operation at the time of emergency.
The roller shutters shall be made from extruded aluminium sections with suitable roller, spring, guide channels
etc. All aluminium sections used shall be properly anodized.
The Roller shutters shall be rolled inwards underneath the roof giving unobstructed access to the equipment
lockers and the firefighting material.
These roller shutters should open in every position of the vehicle even in rough terrain. Guide rails shall support
the shutters over entire length on both sides to make them absolutely torsion free.
The opening of the roller shutters should be done by means of a lift bar provided. This should be of the self
locking type so that while the vehicle is moving, the shutters do not open accidentally during movement of vehicle.
Roller shutters shall be made of hollow rectangular shaped aluminium links which shall be inter connected with
rubber/plastic/PVC profiles sealing the roller shutter watertight when closed. These roller shutters should be durable,
maintenance free, weather and corrosion resistant.
Preferable make (Shutters): MCD or equivalent models from Rosenbauer/Ziegler.
All lockers shall be fitted with internal lighting which shall be capable of being automatically switched ‘ON’ and
‘OFF’ by the opening and closing of the roller shutters. A master switch for isolating the locker lighting circuit shall
also be provided.
Painting of Vehicle
The whole vehicle shall be painted externally & internally with anti corrosive paint i.e., epoxy coating and 2 coats
of fire red polyurethane paint with metallic finishing (If the cab chassis has already been painted red in colour by the
chassis manufacturer it is not necessary to paint again over that paint coat, however in such case the final decision on
painting will be done in consultation with KFRS Department).
For stowage lockers, cab etc., with cream colour and areas not visible with black colour. The Service lettering
(FIRE & RESCUE SERVICES) in Malayalam & English shall be painted/(stickered) on both sides with golden-yellow
colour. The name of the department “FIRE & RESCUE SERVICES” in fluorescent red letter in yellow background shall
be affixed (sticker) on the top of the front wind screen. The Logo of the department shall be displayed in the two sides
and in the bonnet of the vehicle. ‘Dial 101’ shall be painted/(stickered) on all the four sides of the vehicle on yellow
background. in black letters.
Other Electricals
Two fog lamps in addition to normal head lights shall be installed. Blinker type traffic indicators provided by the
OEM shall be maintained in the vehicle after fabrication. Reversing lights on either side should be fixed suitably at the
rear of the appliance.
A spot light not less than 30 W (LED) power shall be provided.
Two-tone hooter cum P. A. System having 25 watt capacity with speaker. LED Light bar with red, blue and white
flasher lights of minimum 75-100 watts and not less than 1000 mm size shall be mounted on the cabin roof with
amplifier in the cabin.
One pair of additional Megasonic High Tone. electric horn shall be provided.
Reverse gear and indicator buzzers shall be provided.
Rear View Camera
Rear view camera shall be provided for the vehicle with 7 inch LCD screen within the cabin.
Spark arrestor
One spark arrestor should be fitted in the exhaust.
INSTRUCTION BOOK:
Instruction book for the guidance of the user including both operating and normal maintenance procedure shall be
supplied. The book shall include an itemized and illustrated spare parts list giving reference number of all the wearing
part. A set of all operating manual for the guidance of the user including both operation and normal maintenance
procedures for all of the appliances and accessories.
The book along with the drawing should be itemwised and illustrate spare list giving reference number to all
wearing parts are made easily available. When necessary, it shall also include line diagrams showing all plumbing
connections between water tank, pump mixing chamber etc.
719
Gaz. No. 41/2018/DTP (Stores Purchase).
16th OCT. 2018]
STORES PURCHASE
1380
MARKING:
Each appliance shall be clearly and permanently marked with the following preferably on a metal plate attached in
the driving compartment and also near/on the pump operating control panels:
(a)
Manufacturer’s name or trade mark.
(b)
Year of manufacturer.
(c)
Capacity of pump in 1/min
(d)
Water/Foam tank in litres.
(e)
Engine and chassis number.
(f)
Pump number
Stagewise Inspection:
The stages of inspection will be as under:—
1st stage inspection
(a)
Structural Inspection
(b)
Testing of Water Tank/Foam Tank hydro testing
(c)
Inspection of Panel Work.
(d)
Inspection of Water Mist Unit
Final stage Inspection
(a)
Final finishing, painting of the appliance.
(b)
Compliance of non conformities, if any
(c)
Water Mist test as per standards
(d)
Pump Testing & Hose Reel Gun performance
(e)
Complete functions-operations of all systems installed.
(f)
Check & maintaining of all catalogues, Operation manual of appliance.
(g)
Road Test of fully laden vehicle up to a distance of 40 kms.
Acceptance Test
The vehicle will be tested after delivery at Fire & Rescue Services
Head Quarters, Thiruvananthapuram and based on this inspection, the vehicle
will be accepted by the department.
Specifications and Drawings
Considering the detailed Specifications, the Auto CAD drawings (both the Hard copy as well as Soft Copy shall
be included) and load calculation chart shall be submitted by the Vendor. The Director General, Kerala Fire & Rescue
Services or his representatives may suggest modifications to the drawings. However, modified drawing should be
submitted by the Vendor within 3 days from the suggestion/discussion. The Bidder shall start the work only after getting
the drawings approved by The Director General, Kerala Fire & Rescue Services. The CAD drawings should clearly
illustrate the detail of the floor structural members of the side, roof cabins, location of Water Tank, foam tank, pump &
equipment lockers etc. with full detailed specifications. Two sets of complete and final CAD Drawings (both the Hard
copy as well as Soft Copy shall be included), in respect of fabrication, stowage arrangements,. fittings, electric circuit
arrangement etc., shall be supplied at the time of delivery of the appliance. These drawing shall be supplied free of
charge. One proto type of the FIRST RESPONSE VEHICLE should be fabricated and get it approved by the Director
General, Kerala Fire & Rescue Services, before commencing the fabrication of entire lot of FIRST RESPONSE
VEHICLES.
Quality of Goods
The equipment/product must conform to the highest quality and standard. Vendor should guarantee that the items
delivered to the purchaser are brand new. All tools/motors/machines must be supplied with their original and complete
printed documentation and technical specifications and Test Certificates, if any. For imported items, the Vendor should
submit the import documents.
Consistency must be maintained for the entire lot of the FIRST RESPONSE VEHICLE based on Mist Technology.
All the required items in schedule of requirement must be of the same brand and of the same or higher technical
specification.
All the equipment should be supplied with the relevant Indian or International standards.
720
16th OCT. 2018]
STORES PURCHASE
1381
Workmanship and Material
Workmanship executed shall be of high order. All rivets and belts-holes shall be drilled (not punched) and fitted
with well fittings. All steel joints shall have a coat of approved paint on both surfaces before reverting or bolting or
welding. All steel screws, bolts, nuts, rivets, etc., shall be zinc coated or rust proofed by recognized process. All
directions and instructions (oral or in writing) on all points relative to the mode or manner of carrying out the works or
as to the nature and quality of materials used or workmanship executed whenever given by The Director General, Kerala
Fire & Rescue Services shall be received and complied with.
R. T. O.’s Requirements
The vehicle shall conform in all respect with provisions contained in the Motor Vehicles Act of 1988 and Motor
Vehicles Rules of 1989 or to any other statutory modifications or re-enactments made from time to time. All the
equipment necessary for R. T. O. passing shall be provided on vehicles and the offer shall be inclusive of all such
equipments.
Warranty
The complete structure & equipments provided and erected on the FIRST RESPONSE VEHICLE, which are not
mentioned specifically, shall be subject to an overall performance warrantee for a period of 24 months from the date of
acceptance.
The Vendor shall be responsible for the maintenance of the FIRST RESPONSE VEHICLE except for the chassis
for any defects or damages to Vehicle due to bad workmanship or of any inferior material, accessories, apparatuses etc.
Onsite Training—Training Schedule & Module should be submitted by the Vendor for actual operation of the
system. Minimum 3 days onsite training should be given by the vendor at their own cost to the fire and rescue personnel.
CONDITIONS
1.
Essential documents to be
:
Pamphlets, Photograph, Drawings, CD etc.
submitted along with the tender
2.
Period of delivery
:
Within 90 days from the date of supply order.
3.
F. O. R.
:
Thiruvananthapuram.
4.
Payment
:
100% payment against delivery of First Response Vehicle at
Thiruvananthapuram and acceptance by an acceptance
committee
5.
Warranty
:
A warranty of 24 months for fabrication and accessories from
the date of acceptance.
6.
Other Special Conditions
1.
EMD—l% of PAC in online payment.
2.
Security deposit—5% of total contract amount to be furnished as mentioned in the Notice Inviting
e-Tender, which will be released after the expiry of the warrantee period.
3.
Any firm whose proprietor, Partner or Director is involved in a Vigilance Case has been charge
sheeted and pending trial at court in connection with fabrication/supply of similar product made earlier to this
Department/Kerala Government are not eligible to participate and shall be barred from participating in
this tender.
4.
The tenderers should produce latest solvency certificate of ` 3 Crores or more and should have an average
annual turnover of ` 2 Crores for the last 3 years.
5.
The bidder should have sufficient previous experience (Minimum 3 years) in fabricating Fire Fighting
Vehicles (atleast 15 Fire fighting vehicles should have been fabricated by the bidder during the last three
years). The copies of supply order for Fabricating Fire Fighting Vehicles placed by States, Union Territories,
and Public Sector Undertakings during the calendar year 2015, 2016 & 2017 should be produced in support.
6.
On receipt of supply order the tenderer should provide Insurance cover for the Kerala Govt. property for
an amount equal to the cost of total number of chassis for fire, damages due to other natural or manmade
calamities and theft.
721
16th OCT. 2018]
STORES PURCHASE
1382
7.
Renewal of temporary registration processes shall be performed by the fabricator at their own expense.
A valid Temporary Registration Certificate (T. P.) Shall be produced before the department at the time of
delivery.
8.
The load distribution chart and detailed drawing of the First Response Vehicle shall be submitted and got
approved from the department by the fabricator, before commencing the fabrication.
9.
If the supplier is not in a position to repair the equipment or accessories provided in the vehicle, they shall
arrange for total replacement of that particular item, as the case may be up to a period of 3 years from the
date of acceptance of the vehicle by the department at Thiruvananthapuram.
10.
The vendor shall be responsible for the maintenance of the First Response Vehicle for any defects or damages
to vehicle due to bad workmanship or of any inferior material accessories, apparatuses etc.
11.
The vendor should provide service assistance and supply of spare parts for a period of minimum 5 years after
the expiry of warranty period, within 30 days since any complaint is reported to the vendor.
12.
Anybody attempting to offer bribe or otherwise influence in any manner the officials of the Kerala Fire and
Rescue Services or its supervisory levels in the Government will be disqualified.
13.
The chassis shall be collected by the vendor from the Chassis Supplier Location, final
Registration of the vehicle will be arranged by KFRS after the completed vehicle is delivered to the KFRS.
The vendor shall take temp. registration of completed vehicle & submit all relevant documents to the KFRS
for final registration.
14.
After collecting the chassis from the department by the vendor and till such time the completed vehicle is
delivered to the KFRS, it shall be the vendor’s responsibility to protect the chassis from damage, accident,
pilferage etc.
15.
Any damage/shortfall shall be made corrected by the vendor at no extra cost to KFRS. After receiving chassis
from the KFRS, and during the period of fabrication of First Response Vehicle, vendor shall arrange to carry
out all periodical services as recommended by the Chassis Manufacturer at its fabrication site.
16.
Any modification like welding, drilling etc. on framework of chassis should be done as per the guidelines
given by the chassis manufacturer. The vendor should .submit load distribution chart on axles before starting
the fabrication. All axles should be loaded within the maximum permissible pay load specified by the chassis
manufacturer.
17.
Any restriction on performance of chassis, observed during/after execution of order shall have to be rectified
by vendor in consultation with KFRS and chassis manufacturer. Such corrections shall be at no extra cost to
KFRS. The vendor shall be responsible’ for supplying all equipment/accessories and properly fixing them on
the chassis as described in the specification. Other delails and requirements which are not covered under the
specification, but may be necessary to complete the First Response Vehicle and/or to fulfil the operation/
performance requiretment shall be provided by the vendor, who shall be responsible for the designing,
engineering and construction of the complete appliance to the full satisfaction of the KERS. Before
finalization of design, the same needs to be approved by KFRS.
18.
At the end of complete fabrication of First Response Vehicle, the vehicle with fully laden conditions shall be
checked and certified by vendor for correct load distribution on individual axle. The actual individual load on
axle shall not exceed the allowable limit specified by chassis manufactrer or regulating authority, whichever
is lower. Chassis supplier shall be called at the vendors’ site to verify the correct load distribution &
fabrication of vehicle as per guidelines of chassis supplier.
Fire and Rescue Services Headquarters,
A. HEMACHANDRAN I.P.S.,
Thiruvananthapuram.
Director General.
722
16th OCT. 2018]
STORES PURCHASE
1383
723
Forest Department
]p\¿ C˛Z¿Lmkv ]ckyw
(1)
[\º¿ 04/2018˛19]
\º¿ ]n3/37328(F)/2018.
2018 sk]v‰w-_¿ 29.
tIcf h\w hIp¸nsâ D]-tbm-K-¯n-\mbn cv ‘‘an\n t^mdÌv ^bÀ sdkvt]m-À’’ h\w hIp¸v \ÂIp¶
hml-\-¯nsâ sNbvÊn ^m{_n-t¡äv sNbvXv \ÂIp-¶-Xn-te-¡mbn, Bh-i-ym-\p-k-cWw kvs]bÀ ]mÀ«vkpw Ah-bpsS
tÌm¡p-Ifpw DÅ {]apJ am\p-^m-Iv¨dÀ/^m{_n-t¡-äÀamcn¬ \n¶pw AUo-j-W {]n³kn-¸Â No^v I¬kÀthäÀ Hm^v
t^mdÌv (F^v, _n & F) aÕc kz`mhapÅ ZÀLmkpIÄ £Wn¡p¶p. D]IcW§Ä CtXm-sSm¸w A\p-_-‘-ambn
tN¿Øn-´p≈ {]Imcw \ne-hm-c-¯n-epw hnh-c-W-¯n-epw DÅh BtIXmWv. CXp kw_Ôn¨ ZÀLmkv {]amW§fpw
ZÀLmkv
sjUyqfqIfpw
www.etenders.kerala.gov.in
F¶
sh_vsskänÂ
e`yamWv.
ZÀLmknt\msSm¸w
kaÀ¸n¡p¶Xn\pÅ \ncX{Zhyw, ZÀLmkv ^o F¶nh Fkv._n.sF.þbpsS CâÀs\äv Hm¬sse³ _m¦nwKv hgntbm, aäv
_m¦pIÄ hgntbm sSdnt\msSm¸w Hm¬sse\mbn kaÀ¸n¡mhp¶XmWv.
FÃm sSÀ {]amW§fpw www.etenders.kerala.gov.in F¶ sh_vsskän ImWn¨ncn¡p¶ Hm¬sse³
IhdpIfn Hm¬sse\mbn am{Xw kaÀ¸nt¡XmWv. ZÀLmkpIÄ t\cnt«m X]mentem Hm^okn kzoIcn¡p¶XÃ.
Xmakn¨p kaÀ¸n¡p¶ sSdpIÄ \ncp]m[nIw \nckn¡p¶XmWv.
AS-¶¬ XpI—` 45 e£w.
\nc-X-{Zhyw (1%)—` 45,000.
Z¿Lmkv ^o—` 6,800.
hml\w ^m{_nt°‰v sNbvXv \¬tI≠ Imemh[n—hÀ¡v HmÀUÀ e`n¨v 60 Znh-k-¯n-\Iw.
]Ww \ÂIp¶ coXn—^m{_n-t¡äv sNbvX hml\w kzo-I-cn¨v 30 Znh-k-¯n-\p-ÅnÂ.
ZÀLmkv {]amWw sh_vsskän e`yamIp¶ XobXn—3˛10˛2018.
ZÀLmkv sh_vsskän kaÀ¸n¡mhp¶ Ahkm\ XobXnbpw kabhpw—29˛10˛2018, 10 aWn.
ZÀLmkv Xpd¡p¶ XobXnbpw kabhpw—2þ11þ2018, 11 aWn.
aqe-y-\nÀ®bw \nÀÆ-ln-¡p¶ XobXn—3þ11þ2018, 11 aWn.
ZÀLmkv Xpd¡p¶ Øew—t^mdÌv slUvI-zmÀt«-gvkv, hgp-X-bv¡m-Sv, Xncp-h-\-´-]p-cw, tIcfw.
ta¸dª D]-I-c-W-§-fpsS F®w Dt±iw am{X-am-Wv. D]IcW§fpsS F®w Iq«p-¶-Xn-\pw Ipd-bv¡p-¶-Xn\pw,
{]kvXpX ZÀLmkv ]qÀ®-ambpw d±v sN¿p-¶-Xn-\papÅ ]qÀ® A[n-Imcw ZÀLmkv £Wn¡p¶ A[nImcnbn \n£n-]vX-am-Wv.
Hm¬sse³ sSdnt\msSm¸w ` 200˛s‚ tIcf Ìm¼v t]¸dn X¿mdm¡n H¸n« {]nenan\dn F{Knsaânsâbpw
A\p-_Ô tcJ-I-fp-sSbpw kvIm³ sNbvX tIm¸n Hm¬sse\mbn kaÀ¸nt¡Xpw AhbpsS AÊ ZÀLmkv Xpd¶
DSs\ kaÀ¸nt¡Xpw AÃm¯]£w Sn ZÀLmkpIÄ bmsXmcp Adnbn¸pw IqSmsX \nckn¡p¶XpamWv.
CþsSdpambn _Ôs¸« hnhc§Ä www.etenders.kerala.gov.in-˛Â \nt¶m sh_vsskän ]dªncn¡p¶ CþsSÀ
sl¸v sUkvInÂ\nt¶m Hm^okv kab¯v Cu Hm^okn \nt¶m (t^m¬ 0471þ2529213) Adnbmhp¶XmWv.
Cþs]bvsaân\v Bhiyamb hnhc§Ä (IcmdpImc³ CS]mSp \S¯p¶ tImÀ _m¦nwKv kuIcyapÅ _m¦v A¡unsâ
hniZhnhc§fpw Cþsabn A{UÊpw) ZÀLmknt\msSm¸w kaÀ¸nt¡XmWv. Cu hnhc§Ä DÄs¸Sp¯m¯
ZÀLmkpIÄ \nckn¡s¸Sp¶XmWv.
ZÀLm-kp-Ifpw aäv A\p-_-Ô-§fpw A]vtemUv sN¿p¶Xnepw aäpw DmIp¶ AkuIcy§Ä¡pw \jvS¯n\pw
h\w-h-Ip¸v D¯chmZn Bbncn¡p¶XÃ.
Gaz. No. 41/2018/DTP (Stores Purchase).
723
1384
KERALA GAZETTE
[PART III
730
[No. 04/2018-19]
No. P3-37328(A)/2018.
29th September 2018.
The Kerala Forest Department invites competitive online tenders from competent Manufacturers/Fabricators or their
authorised dealers with adequate stock and spares and repair capabilities for the ‘Fabrication of two numbers of Mini Forest
Fire Responder Vehicles’ as per the specifications of this Department. The Fire Responder Vehicles should conform to the
technical standards and specifications attached to this notice. Tender documents and schedules are available in the website
www.etenders.kerala.gov.in. The Earnest Money Deposit (EMD) and tender fee should be submitted through the Internet
online banking of SBI or through NEFT for other banks.
All bid/tender documents are to be submitted online only and in the designated Online Cover (s)/envelope(s) in the
www.etenders.kerala.gov.in website and tenders submitted manually/through post will not be entertained. Late tenders will
not be accepted.
PAC—` 45 Lakh.
EMD (1 %)—` 45,000.
Tender fee—` 6,800.
Security Deposit—5% of total contract amount to be furnished as bank guarantee of a Scheduled Bank.
Period of supply of Fabricated Mini Forest Fire Responder Vehicles—Within 60 days from the receipt of the work order.
Mode of Payment—Within 30 days from the date of acceptance of the Fabricated Vehicle.
Date from which the e-tender will be available in the official website of KFD—3-10- 2018.
Last date and time of receipt of e-tender—29-10-2018, 10 a. m.
Opening of e-tender—2-11-2018, 11 a. m.
Date of Presentation & Evaluation—3-11-2018, 11 a. m.
Venue of opening of e-tender—Forest Headquarters, Vazhuthacaud, Thiruvananthapuram, Kerala.
The number of items mentioned above is approximate. The KFD will be at liberty to increase or decrease the number to
be procured/ installed or may decide not to procure at all.
Online tenders/bids are to be accompanied with a preliminary agreement executed on Kerala Stamp Paper worth ` 200.
Tenders/bids received online without the scanned copies of relevant documents, preliminary agreement, will not be
considered and shall be summarily rejected. The original documents should be submitted soon after the opening of tender.
Any further clarifications regarding this tender can be obtained from NIC/the e-tender Helpdesk Number available in the
www.etenders.kerala.gov.in website and from the office of the Additional Principal Chief Conservator of Forests (F, B & A)
during the office hours (Ph : 0471–2529213). The details regarding e-Payment (Bidder’s Bank Account No. where he/she is
having core banking facility and e-mail ID) should be submitted along with the tender. Tenders without these details will not
be accepted.
The Forest Department will not be responsible for any inconveniences or loss to the Bidder while uploading/
downloading the bid.
724
16th OCT. 2018]
STORES PURCHASE
1385
731
TECHNICAL STANDARDS AND SPECIFICATIONS OF THE
FOREST FIRE RESPONDER VEHICLES
Kerala Forest Department intends to get fabricated two Forest Fire Responder Vehicles for the use in forests areas. The
fabrication shall be done on the Chassis which will be supplied by the Department. Detailed technical specification for the
fabrication of a Forest Fire Responder Vehicle is furnished below.
I.
Specifications for the Water Mist System (1 No.)
1. Water Mist Fire Fighting System
The water mist fire fighting system shall have a filling volume of 450 Litres of Water. It should be designed
to be mounted on standard pickups and other small vehicles. It should ensure the reduced use of water and
minimise other collateral damages. The Unit shall be designed to suck water from an external source for direct fire fighting or
filling of the tank.
The fire fighting unit should have an approval/certification from an international testing, supervision & certification
organisation for fire extinguishing media and equipment (VdS/CNPP/MPA). In the absence of participants possessing
international quality and standards, the participants claiming quality, standard and certification of national level agencies like
TUV, Bureau Veritas, Tata Projects, L & T or SGS will be considered.
Specification/Details of the Unit
Weight of empty Unit—150 Kgs. (Max)
Max. Measurements of the unit (in mm)—As compact as possible
Usable Water capacity—450 Ltrs.
System—12V electrical system
Pump—Triplex high pressure plunger type
Connection for external water supply to unit—Storz coupling
Frame work of the unit—Stainless Steel with carrying handles
Standard tool set—Micro nozzle removing tool, spanners
No. of deliveries—1 or 2 Nos.
2.
Main Pump
The pump shall be capable of suction of water from tank or open source and to maintain adequate discharge rate and
pressure for operation of nozzle at optimum efficiency.
Working Pressure—120Bars.
Flow Rate—20-25 LPM
3.
Engine
The prime mover for pump shall be 4-stroke Petrol driven engine and shall have compatible electrical and
lubrication system. The engine should preferably start on 12V battery, for which adequate charger shall also be
provided. Suitable system shall be provided on the body of engine/panel for indicating fuel level, battery and temperature.
Power of the engine—Not less than 15 BHP, 2 Cylinder 4 Stroke OHV
Fuel—Unleaded Petrol
725
1386
KERALA GAZETTE
[PART III
730
Fuel Tank—Approx. 5 Litres
Fuel Consumption—3 to 4 Litres/hr.
Starter—Electric starter with Pull cord override
Fuel Level Indicator—Mechanical
Preferably Honda/Vanguard/Briggs & Stratton or other similar reputed make.
Control Panel on the unit frame
Control panel should have following provisions:
-
Ignition switch and starter button
-
Emergency stop switch
-
Pressure Gauge
-
Battery charge indicator
-
Oil pressure control
-
Choke
-
Hour meter
4.
Main Extinguishing Gun
The gun shall be provided with a suitable stainless steel filter. The design of gun shall be such that there is no
appreciable re-coil pressure. The Gun should have a Handle, should be provided with facility to adjust the flow rate and high
pressure ball valve with locking lever to select the type of jet. It should be possible to change the spray pattern during
operation of the unit. The nozzle head of the gun should have several very fine fog nozzles and one central fog nozzle.
The main extinguishing Gun shall be capable of producing following spray patterns.
(a)
Very Fine Water Fog
(b) Combination of very fine water fog and Broad central jet of fog
(c)
Full Jet.
Flow rate—7-25 LPM
Weight of extinguisher gun— 4 Kgs Max.
Gun Dimensions—As compact as possible.
Working pressure on the nozzle—100 to 120 bars
(with nominal reaction.)
Throw—Jet – not less than 14mts. (+/- 10%)
Fog—not less than 6m (+/- 10%)
Hose reel—60mts (std) on manual Drum with an extension pieces of 30m.
Preferably Rosenbauer/AFT/Fogtec or similar reputed make.
Accessories
Tool kit comprising of 1 No. adjustable spanner 12”—1 No. plier-1, Set of double end spanners—1, screw driver
set—1 and other special tools as per the requirement of the unit.
726
16th OCT. 2018]
STORES PURCHASE
1387
731
5.
Design & Development
Equipment details:—The Water Mist Fighting System will be a self driven fire fighting unit operated with
inbuilt Petrol Engine coupled to a pump and attached with a pressure reducer, delivery valves, hose pipes and Mist/jet
generating Guns.
The water mist system shall be capable of carrying 450 litres of water made of GRP in suitable shape to keep the
gravity centre of the vehicle as low as possible.
The discharge gun shall be of light weight stainless steel nozzle capable of producing Water Mist with the ability to
control the discharge in short burst and long shots.
The size of mist particle shall be in the range of 10 to 150 microns for several fog nozzles which are mounted on the
nozzle head other than the central jet. Valid proof for the same should be attached.
A suitable pressure reducer with a safety valve, capable of reducing to a suitable pressure & ensuring jerk free working
pressure shall be incorporated. The main vessel shall be corrosion free.
6.
Safety Devices
The unit shall have adequate provisions for safety of the system. The following safety device shall form part of
equipment.
(i)
The system shall be provided with pressure safety valve.
(ii) The system will have proper heat & exhaust outlet for the engine without causing any interference to
the operator while operating the unit (exhaust pipe must be extended outside the fabricated body).
(iii) Any other safety device which is felt necessary to be a part of the equipment.
7.
Main Water Tank
The water tank of the Water Mist System shall be made of GRP for giving a corrosion free life and making
system lightweight, having useable storage capacity of 450 Litres. The Tank should be properly baffled into segments
to reduce water surge. The thickness of the water tank should be minimum 5mm. A manhole of Φ 330 mm with
overflow pipe and an optical wat er level indicator should be part of the tank. The mounting of the Tank should be in
such a way that, it should maintain optimum stability of the vehicle on loaded condition.
8.
Hoses
The hoses provided in the system shall be high quality and shall be capable of holding the temp. ranges -200 to + 550 C. The
material specification, working pressure, test pressure and cracking pressure should be indicated for each type of hose. The
length of hose should be 90 M (30 metre +30 metre+30 metre). The hose should be flame resistant. The seals and O-rings
used in the system should be of synthetic material like Nitrile rubber or equivalent.
Test of acceptance of fire fighting system
Physical dimensions, performance & weight check of equipment as given under different items shall form part of
test of acceptance.
II.
Specifications of Portable Pump (1 No.)
Air Cooled 4 stroke
Fuel—Petrol
Priming—Self Priming
Gaz. No. 41/2018/DTP (Stores Purchase).
727
1388
KERALA GAZETTE
[PART III
730
Head—Not less than 25 Metre
Discharge—Approx. 900 Lpm
Weight—Not more than 26 Kg
Fuel tank—not less than 3 Litres
Preferable make—Honda WB30X
Each portable pump should be supplied with the following items:
1. Suction hose of suitable diameter and 10 metre length.
2. Suction Strainer–1 No.
3. Basket strainer–1 No.
4. Suction wrenches–2 Nos.
5. Delivery hose–15 metre, 2 length
Tool Kit–1 set
III. Specifications of Petrol engine operated chain saw (1 No.)
Power output—Not less than 3.9 Kw
Chain Bar Length—Not less than 400mm
Weight—Not more than 6.6 Kg.
Spare chain—3 numbers
Preferable make—STIHL MS381 or Equivalent
IV. General Conditions
1.
Body Work of Vehicle
The rear body structure/frame work shall be of welded constructions and made from 2mm thick MS pressed
sections and square tubes. The Angles and channels used shall be of min. 3mm thickness. The complete structure
material shall be treated for anti corrosion by zinc plating. The plating thickness shall not be less than 20 microns. Two
coats of Epoxy paint shall be applied to the completely welded structure.
The structure shall be so designed so as to avoid any vibration/rattling/deformation in the intended usage
of the vehicle.
The interior panelling shall be done from 1.22mm thick aluminium sheets & the exterior panelling shall be done
from 1.60mm thick aluminium sheets. Floor vinyl mat should be provided to the cabin. Rexene Seat cover to be provided.
The load body of vehicle should not be fabricated beyond 50 cm in height, from height of the roof top of the cabin,
since the body roll will also increase with the increase in height. Aerodynamic deflector to be provided to reduce the air
resistance. Shape of the fabricated body should be in tune with the design of the original cabin.
Lockers
The lockers should be provided for storage of all equipments mentioned in the specification. All equipments
should be stowed very scientifically & systematically in the lockers & each piece of equipment shall have its designated
location so that at the time of emergency the required equipment can be located very easily & removed for use. Floor of
lockers shall be covered with good quality neoprene rubber sheets.
All the equipment should be properly clamped and strapped in the lockers to prevent shifting of the equipments
while the vehicle is in motion.
728
16th OCT. 2018]
STORES PURCHASE
1389
731
All the lockers should be covered (rear side also) with Push-Pull type aluminium roller shutters only, for faster &
smoother operation at the time of emergency.
The roller shutters shall be made from extruded aluminium sections with suitable roller, spring, guide channels
etc. All aluminium sections used shall be properly anodized.
The Roller shutters shall be rolled inwards underneath the roof giving unobstructed access to the equipment lockers
and the firefighting material.
These roller shutters should open in every position of the vehicle even in rough terrain. Guide rails shall support
the shutters over entire length on both sides to make them absolutely torsion free.
The opening of the roller shutters should be done by means of a lift bar provided. This should be of the self
locking type so that while the vehicle is moving, the shutters do not open accidentally during movement of vehicle.
Roller shutters shall be made of hollow rectangular shaped aluminium links which shall be inter connected with
rubber /plastic/ PVC profiles sealing the roller shutter water tight when closed. These roller shutters should be durable,
maintenance free, weather and corrosion resistant.
Preferable make (Shutters): MCD or equivalent models from Rosenbauer/ Ziegler.
All lockers shall be fitted with internal lighting which shall be capable of being automatically switched 'ON' and
'OFF' by the opening and closing of the roller shutters. A master switch for isolating the locker lighting circuit shall also be
provided.
2.
Painting of Vehicle
The whole vehicle shall be painted externally & internally with anti corrosive paint i.e. epoxy coating and
2 coats of olive green camouflage polyurethane paint. (If the cab chassis has already been painted olive green
camouflage in colour by the chassis manufacturer, it is not necessary to paint again over that paint coat. However
in such case the final decision on painting will be done in consultation with the Department).
For stowage lockers, cab etc. with cream colour and areas not visible with black colour. The Service
lettering (FOREST) in Malayalam & English shall be painted/(stickered) on both sides with golden-yellow
colour. The name of the department “FOREST” in fluorescent red letter in yellow background shall be affixed
(sticker ) on the top of the front wind screen. The LOGO of the department shall be displayed in the two sides and
in the bonnet of the vehicle.
3.
Other Electricals
Two fog lamps in addition to normal head lights shall be installed. Blinker type traffic indicators provided by the OEM
shall be maintained in the vehicle after fabrication. Reversing lights on either side should be fixed suitably at the rear of the
appliance.
A spot light not less than 30 W (LED) power shall be provided.
Two-tone hooter cum P.A. System having 25 watt capacity with speaker, LED Light bar with red, blue and
white flasher lights of minimum 75-100 watts and not less than 1000 mm size shall be mounted on the cabin roof with
amplifier in the cabin.
One pair of additional Mega sonic High Tone electric horn shall be provided.
Reverse gear and indicator buzzers shall be provided.
Beacon light having multi colour has to be provided.
4.
Rear View Camera
Rear view camera shall be provided for the vehicle with 7 inch LCD screen within the cabin.
729
1390
KERALA GAZETTE
[PART III
730
5.
Instruction Book
Instruction book for the guidance of the user including both operating and normal maintenance procedure shall be
supplied. The book shall include an itemized and illustrated spare parts list giving reference number of all the wearing part.
A set of all operating manual for the guidance of the user including both operation and normal maintenance procedures
for all of the appliances and accessories.
The book along with the drawing should be item wised and illustrate spare list giving reference number to all
wearing parts are made easily available. When necessary, it shall also include line diagrams showing all plumbing
connections between water tank, pump mixing chamber etc.
6.
Marking
Each appliance shall be clearly and permanently marked with the following preferably on a metal plate attached in the
driving compartment and also near/on the pump operating control panels:
(a) Manufacturer’s name or trade mark.
(b) Year of manufacturer.
(c) Capacity of pump in l/min
(d) Water tank in litres.
(e) Engine and chassis number
(f) Pump number
7.
Stagewise Inspection
The stages of inspection will be as under:—
1st stage inspection
(a) Structural Inspection
(b) Testing of Water Tank hydro testing
(c) Inspection of Panel Work
(d) Inspection of Water Mist Unit
Final stage Inspection
(a) Final finishing, painting of the appliance.
(b) Compliance of non conformities, if any
(c) Water Mist test as per standards
(d) Pump Testing & Hose Reel Gun performance
(e) Complete functions-operations of all systems installed.
(f) Check & maintaining of all catalogues, Operation manual of appliance.
(g) Road Test of fully laden vehicle up to a distance of 40 kms.
Acceptance Test
The vehicle will be tested after delivery at Kerala Forest Department Headquarters, Vazhuthacaud,
Thiruvananthapuram and based on this inspection; the vehicle will be accepted by the
department.
730
16th OCT. 2018]
STORES PURCHASE
1391
731
8. Specifications and Drawing
Considering the detailed Specifications, the Auto CAD drawings (both the Hard copy as well as Soft Copy shall be
included) and load calculation chart shall be submitted by the Vendor. The Additional Principal Chief Conservator of Forests
(F, B & A) of the Kerala Forest Department or his representatives may suggest modifications to the drawings. However,
modified drawing should be submitted by the Vendor within 3 days from the suggestion/discussion. The Bidder shall start the
work only after getting the drawings approved by The Additional Principal Chief Conservator of Forests (F, B & A) of the
Kerala Forest Department; The CAD drawings should clearly illustrate the detail of the floor structural members of the side,
roof cabins, location of Water Tank, pump & equipment lockers etc. with full detailed specifications. Two sets of complete
and final Cad Drawings (both the Hard copy as well as Soft Copy shall be included), in respect of fabrication, stowage
arrangements, fittings, electric circuit arrangement etc. shall be supplied at the time of delivery of the appliance. These
drawing shall be supplied free of charge.
9. Quality of Goods
The equipment/product must conform to the highest quality and standard. Vendor should guarantee that the items
delivered to the purchaser are brand new. All tools/ motors/ machines must be supplied with their original and complete
printed documentation and technical specifications and Test Certificates, if any. For imported items, the Vendor should
submit the import documents.
Consistency must be maintained for the entire lot of the Forest Fire Responder vehicle based on Mist Technology. All
the required items in schedule of requirement must be of the same brand and of the same or higher technical
specification.
All the equipment should be supplied with the relevant Indian or International Standards.
10. Workmanship and Material
Workmanship executed shall be of high order. All rivets and belts - holes shall be drilled (not punched) and fitted with
well fittings. All steel joints shall have a coat of approved paint on both surfaces before reverting or bolting or welding. All
steel screws, bolts, nuts, rivets, etc. shall be zinc coated or rust proofed by recognized process. All directions and instructions
(oral or in writing) on all points relative to the mode or manner of carrying out the works or as to the nature and quality of
materials used or workmanship executed whenever given by The Additional Principal Chief Conservator of Forests
(F, B & A) of the Kerala Forest Department shall be received and complied with.
11. R. T. O’s Requirements
The vehicle shall conform in all respect with provisions contained in the Motor Vehicles Act of 1988 and Motor
Vehicles Rules of 1989 or to any other statutory modifications or re-enactments made from time to time. All the
equipment necessary for R.T.O. passing shall be provided on vehicles and the offer shall be inclusive of all such equipments.
12. Warranty
The complete structure & equipments provided and erected on the Forest Fire Responder vehicle, which are not
mentioned specifically, shall be subject to an overall performance warrantee for a period of 36 months from the date of
delivery.
The Vendor shall be responsible for the maintenance of the Forest Fire Responder vehicle except for the chassis for
any defects or damages to Vehicle due to bad workmanship or of any inferior material, accessories, apparatuses etc. for the
performance warranty period.
Onsite Training:—Training Schedule & Module should be submitted by the Vendor for actual operation of the system.
Minimum 3 days on site training should be given by the vendor at their own cost to the department personnel.
731
Gaz. No. 41/2018/DTP (Stores Purchase).
1392
KERALA GAZETTE
[PART III
730
Conditions
I.
General
1.
Competent manufacturers/fabricators or their authorised dealers with adequate stock and spares and repair
capabilities for the fabrication can participate in the e-tender.
2.
The Fire Responder Vehicles should conform to the technical standards and specifications attached to this
notice and should be fabricated as per the directions of this Department.
3.
Any firm whose Proprietor, Partner or Director is involved in a Vigilance Case has been charge sheeted and
pending trial at court in connection with fabrication/supply of similar product made earlier to this department/
Kerala Government are not eligible to participate and shall be barred from participating in this e-tender.
4.
The tenderers should produce latest solvency certificate of ` 30 Lakh or more.
5.
The bidder should have fabricated and supplied at least 10 fire fighting vehicles during the last 3 years. The
copies of supply order for fabricating Fire Fighting Vehicles placed by States, Union Territories, and Public
Sector Undertakings during the calendar year 2015, 16 & 17 should be produced in support of previous
experience.
6.
For obtaining Digital Signature Certificate (DSC) and necessary portal enrolment bidders can visit the website
https://etenders.kerala.gov.in
7.
All bid/tender documents are to be submitted online only and in the designated Online Cover (s) / envelope (s)
in the www.etenders.kerala.gov.in website.
8.
The tender fee and EMD shall be received only through online payment SBI/SBI NEFT
9.
e-tenders submitted manually/through post will not be entertained.
10. Late e-tenders will not be accepted.
11. Rates should be quoted in Indian Currency including all taxes and transportation charges.
12. Pamphlets, Photograph, Drawings, CD etc. should be forwarded/uploaded along with the e-tender.
13. The load distribution chart and detailed drawing from the competent authority shall be submitted and got
approved from the department by the fabricator, before commencing the fabrication.
14. The chassis will be handed over to the fabricator by the department and it is the responsibility of the fabricator
to arrange the mobilization of the chassis, if any required.
15. On receipt of the supply order the tenderer should provide Insurance cover for the Kerala Government Property
for an amount equal to the cost of total number of chassis for fire and theft.
16. The Fabricated vehicle should be delivered within 60 days from receipt of supply order.
17. 100% payment will be effected against delivery at Thiruvananthapuram and acceptance by an acceptance
committee.
18. A Warranty of 36 months for fabrication and accessories from the date of acceptance of the item by the
Department shall be provided by the fabricator.
19. Renewal of temporary registration processes shall be performed by the fabricator at their own expense. A valid
Temporary Registration Certificate (T.P.) shall be produced before the department at the time of delivery.
20. If the supplier is not in a position to repair the equipment or accessories provided in the vehicle, they shall
arrange for total replacement of that particular item, as the case may be up to a period of 3 year from the date of
acceptance of the vehicle by the department at Thiruvananthapuram.
732
16th OCT. 2018]
STORES PURCHASE
1393
731
21. The vendor shall be responsible for the maintenance of the Mini Forest Fire Responder Vehicle for any defects
or damages to vehicle due to bad workmanship or of any inferior quality material, accessories, apparatuses etc.
22. The vendor should provide service assistance and supply of spare parts for a period of minimum 5 years after
the expiry of warranty period within 15 days from the date of reporting complaint.
23. Anybody attempting to offer bribe or otherwise influence in any manner the officials of the Kerala Forest
Department or its supervisory levels in the Government will be disqualified.
24. All other charges and expenses related should be borne by the fabricator.
25. Bidders will be directed to the payment gateway page of the State Bank of India. There are two options – State
Bank of India (SBI) Net banking payment, payment through NEFT from other banks to the payment gateway
of SBI.
26. Tenders will be opened online in the presence of such tenderers or their authorized representatives who have
logged in before the prescribed time of opening of technical & financial bids.
27. If the date fixed for opening happens to be a holiday/unable to open the tender due to technical issues, the
tenders will be opened in the next working day, at the same time and place.
28. The tenderer, or his representative, shall be physically present at Forest Headquarters on the date prescribed,
with necessary documents and presentations on all the technical aspects of the vehicle to be fabricated and
accessories for the complete understanding of the evaluation committee and verification.
29. The firms shall give in writing any aspect of fabrication if asked by the evaluation committee during the
presentation.
30. The offer of any firm, which fails to represent in the presentation and evaluation in the prescribed date and
time, or fails to give complete details of the proposed fabrication including accessories during presentation, will
be rejected.
II Penalty
In case the successful tenderer could not supply the items as per the agreement within the specified delivery period,
penalty will be charged @ 1% of the total value of the contract for the initial first month after the allowed supply period and
thereafter enhancement @ 2% of the value of the contract for each subsequent month of delay in supply and installation,
subject to a maximum of 5%. In case the contract is not completely and satisfactorily performed, the Kerala Forest
Department has the right to terminate the contract and to arrange at the risk and cost of the successful tenderer to supply and
work from alternate sources at their discretion and to forfeit the security deposit. The cost of making alternative arrangement
will also be recovered from the tenderer.
In the case of extension of time the tenderer may request to the Agreement Authority well in advance, if extension is
required. Considering the eligibility of the request, if Agreement Authority satisfies about the situation, a fair and reasonable
extension of time for completion of the work can be allowed with or without imposing penalty as the authority deems fit.
III E-tender Cover System
The tender has two covers.
1.
Technical cover &
2.
Financial cover
1. The first cover ie. the technical cover shall be uploaded with the following document.
(i) The bidder should upload duly signed copies of all tender papers and all the supporting documents prescribed
in the tender notice.
(ii) Valid PAN and ID proof of the Manufacturer/Fabricator.
(iii) List of fabrication centres in Kerala and South India.
733
1394
KERALA GAZETTE
[PART III
730
(iv) Valid GST Registration Certificate of the Manufacturer/Fabricator.
(v)
Scanned copy of the Departmental Specification Compliance Statement in the given proforma along with
diagrams intended to supply.
(vi) The Bidder should prepare the specification compliance statement in the prescribed proforma (Format – I) and
upload it duly signed. The Specification Compliance Statement should contain all the details in the
Departmental technical specifications and the compliance to the same to be properly marked and deviation, if
any, shall be marked in the compliance statement.
(vii) Scanned copy of the agreement in the prescribed format (Format – II) in Kerala Stamp Paper worth ` 200.
(viii) Brochures of the product intended to supply.
(ix) Work experience certificate, O.E.M. Authorisation Letter and other relevant details.
(x)
Scanned copies of the declaration (Format – III) by the bidder on Kerala Stamp Paper worth ` 200 to the effect
that no Vigilance Case has been charge sheeted and pending trial at Court against him/his partner/s or any of
his directors in connection with fabrication/supply of similar product made earlier to this Department.
(xi) Scanned copy of Balance Sheet for the last 3 years and audit reports of CA for the last 3 years.
2. The second cover ie. the Financial Bid cover
(i)
The rate can be quoted in the BOQ.
(ii) Rates should be quoted in Indian currency including all taxes, transportation charges etc.
(iii) Financial evaluation will be done based on the total amount quoted for fabrication.
IV Tender Opening and evaluation
(a)
Soon after the opening of the tender, the tenderers are requested to come to the Kerala Forest and Wildlife
Department Headquarters, Thiruvananthapuram with documents and presentations on all the technical aspects
of the fabrication and accessories for the full understanding of the Technical Committee, on the date specified.
(b)
There will not be any further communications about the opening of the technical and financial bids separately.
Soon on opening the technical bid of e-tenders, the committee constituted to evaluate the technical aspects, will
meet and scrutinize the technical specification of equipment submitted with the e-tender.
(c)
During evaluation, the tenders will be first evaluated for the compliance of Departmental Technical
Specification. Only those tenders which comply the Departmental Technical Specifications will be considered
for subsequent financial evaluation.
(d)
The financial bid belonging to those dealers/suppliers who qualified in the technical bid of the equipment as
required above by the Kerala Forest and Wildlife Department alone will be considered subject to the conditions
in Administrative Sanction or any other directions from Government.
(e)
On finalization of technical evaluation, the second cover i.e. the financial bid of the concerned competent firm
will be evaluated by the Kerala Forest and Wildlife Department for consideration.
(f)
The originals of Technical specification compliance statement of the product, agreement in Kerala Stamp Paper
worth ` 200, the declaration on Kerala Stamp Paper worth ` 200 and Brouchers/Photograph/Diagrams of the
fabrication and accessories, OEM Authorisation Letter, if any, and other documents shall be produced before
the undersigned soon after the Financial Bid opening.
(g)
After opening the financial bid, financial evaluation will be done and the details will be uploaded in the
financial evaluation field of the e-tender site. The decision of the Departmental Purchase Committee (DPC)
will be final on the admissibility of the tender and thereafter awarding of the contract.
(h)
The right of acceptance or rejection of e-tender or cancelling the tender without assigning any reason, at any
stage of tendering, is solemnly vested with the Additional Principal Chief Conservator of Forests (F, B & A),
Kerala Forest and Wildlife Department or a committee appointed by him.
734
16th OCT. 2018]
STORES PURCHASE
1395
731
(i)
The rules and regulations prescribed for e-tenders by the Government of Kerala/Store Purchase Manual,
Government of Kerala shall be applicable to this e-tender also. If any tenderer wants any clarification on any
aspect of the tender, he/she can send email to [email protected] or fax to 0471-2337538.
(j)
Details with respect to the e-tender and the details of specifications of the item to be purchased can be obtained
from the e-tender website https//etenders.kerala.gov.in.
(k)
Any legal dispute that may arise in relation to the e-tender formalities will be restricted to the jurisdiction of
Thiruvananthapuram District Court.
(2)
[\º¿ 05/2018˛19]
\º¿ ]n.3/37328(_n)/2018.
2018 sk]v‰w-_¿ 29.
tIcf h\w hIp¸nsâ D]-tbm-K-¯n-\mbn cv an\n t^mdÌv ^bÀ sdkvt]m-À hml-\-§Ä \nÀ½n-¡p-¶-
Xn-te¡v ZÀLmkv ]c-k-y-¯n hnh-cn¡pw {]Im-c-apÅ hml-\-¯nsâ sNbvknÊv˛2 FÆw \ÂIp-¶-Xn-te-¡mbn Bh-i-ym-\p-k-
cWw kvs]bÀ ]mÀ«vkpw Ah-bpsS tÌm¡p-Ifpw DÅ {]apJ am\p-^m-IvNdÀ/UoeÀamcn \n¶pw AUo-j-W {]n³kn-
¸Â No^v I¬kÀthäÀ Hm^v t^mdÌv (F^v, _n & F) aÕc kz`mhapÅ ZÀLmkpIÄ £Wn¡p¶p. hml-\-¯nsâ
sNbvknÊv CtXm-sSm¸w A\p-_-Ô-ambn tNÀ¯n«pÅ ]«nIbn hnhcn¡pw {]Imcw \ne-hm-c-¯n-epw hnh-c-W-¯n-epw
DÅh BtIXmWv. CXp kw_Ôn¨ ZÀLmkv {]amW§fpw ZÀLmkv sjUyqfqIfpw www.etenders.kerala.gov.in F¶
sh_vsskän e`yamWv. ZÀLmknt\msSm¸w kaÀ¸n¡p¶Xn\pÅ \ncX{Zhyw, ZÀLmkv ^o F¶nh Fkv._n.sF.þbpsS
CâÀs\äv Hm¬sse³ _m¦nwKv hgntbm, aäv _m¦pIÄ hgntbm sSdnt\msSm¸w Hm¬sse\mbn kaÀ¸n¡mhp¶XmWv.
FÃm sSÀ {]amW§fpw www.etenders.kerala.gov.in F¶ sh_vsskän ImWn¨ncn¡p¶ Hm¬sse³
IhdpIfn Hm¬sse\mbn am{Xw kaÀ¸nt¡XmWv. ZÀLmkpIÄ t\cnt«m X]mentem Hm^okn kzoIcn¡p¶XÃ.
Xmakn¨p kaÀ¸n¡p¶ sSdpIÄ \ncp]m[nIw \nckn¡p¶XmWv.
AS-¶¬ XpI—` 15 e£w.
\nc-X-{Zhyw (1%)—` 15,000.
Z¿Lmkv ^o—` 2,300.
hnX-cWw sNt¿-p¶ Imem-h[n —hÀ¡v HmÀUÀ e`n¨v 21 Znh-k-¯n-\Iw.
]Ww \ÂIp¶ coXn—{]kvXpX {]hr¯n ]qÀ¯n-bm-¡n-b-Xn\ptijw 30 Znh-k-¯n-\p-Ån¬.
ZÀLmkv {]amWw sh_vsskän e`yam°p¶ XobXn—2018 HIvtSm_¿ 3.
ZÀLmkv sh_vsskän kaÀ¸n¡mhp¶ Ahkm\ XobXnbpw kabhpw—2018 HIvtSm-_À 29, ]I 10 aWn.
ZÀLmkv Xpd¡p¶ XobXnbpw kabhpw—2018 \hw-_À 2 ]IÂ 11 aWn.
aqe-y-\nÀ®bw \nÀÆ-ln-¡p¶ XobXn—2018 \hw-_À 3 ]I- 11 aWn.
ZÀLmkv Xpd¡p¶ Øew—h\whIp∏v Bÿm\w, hgp-X-bv¡m-Sv, Xncp-h-\-´-]p-cw.
ta¸dª hml\ßfpsS F®w Dt±iw am{X-am-Wv. hml\ßfpsS F®w Iq«p-¶-Xn-\pw Ipd-bv¡p-¶-Xn\pw {]kvXpX
ZÀLmkv d±v sN¿p-¶-Xn-\papÅ ]qÀ® A[n-Imcw ZÀLmkv £Wn¡p¶ A[nImcnbn \n£n-]vX-am-Wv.
Hm¬sse³ sSdnt\msSm¸w ` 200˛s‚ tIcf Ìm¼v t]¸dn X¿mdm¡n H¸n« {]nenan\dn F{Knsaâv kvIm³ sNbvX
tIm¸n Hm¬sse\mbn kaÀ¸nt¡Xpw AhbpsS AÊ ZÀLmkv Xpd¶ DSs\ kaÀ¸nt¡Xpw AÃm¯]£w Sn
ZÀLmkpIÄ
bmsXmcp
Adnbn¸pw IqSmsX \nckn¡p¶XmWv.
CþsSdpambn
_Ôs¸« hnhc§Ä
www.etenders.kerala.gov.in-˛Â \nt¶m, sh_vsskän ]dªncn¡p¶ CþsSÀ sl¸v sUkvIn¬\nt¶m, Hm^okv
kab¯v Cu Hm^okn \nt¶m (t^m¬ 0471þ2529213) Adnbmhp¶XmWv. Cþs]bvaân\v Bhiyamb hnhc§Ä
Gaz. No. 41/2018/DTP (Stores Purchase).
735
1396
KERALA GAZETTE
[PART III
730
(IcmdpImc³ CS]mSp \S¯p¶ tImÀ _m¦nwKv kuIcyapÅ _m¦v A¡unsâ hniZ hnhc§fpw CþsabnÂ
A{UÊpw) ZÀLmknt\msSm¸w kaÀ¸nt¡XmWv. Cu hnhc§Ä DÄs¸Sp¯m¯ ZÀLmkpIÄ \nckn¡s¸Sp¶XmWv.
ZÀLm-kp-Ifpw aäv A\p-_-Ô-§fpw A]vtemUv sN¿p¶Xnepw aäpw DmIp¶ AkuIcy§Ä¡pw \jvS¯n\pw
h\w-h-Ip¸v D¯chmZn Bbncn¡p¶XÃ.
[No. 05/2018-19]
No. P3-37328(B)/2018.
29th September 2018.
The Kerala Forest Department invites competitive online tenders from competent Original Equipment Manufacturers or
from their authorised dealers with adequate stock and spares and repair capabilities for the ‘Supply of Vehicle Chassis–2 Nos’
as per the specifications of this Department. The Vehicle Chassis should conform to the technical standards and specifications
attached to this notice. Tender documents and schedules are available in the website: www.etenders.kerala.gov.in. The
Earnest Money Deposit (EMD) and tender fee should be submitted through the Internet online banking of SBI or through
NEFT for other Banks.
All bid/tender documents are to be submitted online only and in the designated Online Cover (s)/envelope (s) in the
www.etenders.kerala.gov.in website and tenders submitted manually/through post will not be entertained. Late tenders will
not be accepted.
PAC—` 15 lakhs.
EMD (1%)—` 15,000.
Tender fee—` 2,300.
Security Deposit—5% of total contract amount to be furnished as Bank Guarantee of a Scheduled Bank.
Period of supply of Vehicle Chassis—Within 21 days from the receipt of the supply order.
Mode of Payment—Within 30 days from the date of acceptance of the Vehicle Chassis.
Date from which the e-tender will be available in the official website of KFD—From 3rd October 2018.
Last date & time of receipt of e-tender—29-10-2018, 10 a. m.
Opening date and time of e-tender—2-11-2018, 11 a. m.
Date of Presentation & Evaluation—3-11-2018, 11 a. m.
Venue of opening of e-tender—Forest Headquarters, Vazhuthacaud, Thiruvananthapuram, Kerala.
The number of items mentioned above is approximate. The KFD will be at liberty to increase or decrease the number to
be procured/installed or may decide not to procure at all.
Online tenders/bids are to be accompanied with a preliminary agreement executed on Kerala Stamp Paper worth ` 200.
Tenders/bids received online without the scanned copies of relevant documents, preliminary agreement, will not be
considered and shall be summarily rejected. Any further clarifications regarding this tender can be obtained from NIC/the
e-tender Helpdesk number available in the www.etenders.kerala.gov.in website and from the office of the Additional
Principal Chief Conservator of Forests (F, B & A) during the office hours (Ph : 0471–2529213). The details regarding
e-Payment (Bidder’s Bank Account No. where he/she is having core banking facility and email ID) should be submitted along
with the tender. Tenders without these details will not be accepted.
736
16th OCT. 2018]
STORES PURCHASE
1397
731
The Forest Department will not be responsible for any inconveniences or loss to the Bidder while uploading/
downloading the bid.
Technical standards and specifications of the Vehicle Chassis
Kerala Forest Department decided to purchase two Vechile Chassis for the fabrication of two Forest Fire Responder
Vehicles for the use in forest areas.
Sl. No.
Details of chassis
Specification
1
Wheel Base
Not less than 3200 mm
2
Length
Not less than 4800 mm
3
G. V. W.
Not less than 2750 Kg
4
Pay load
Not less than 1000 Kg
5
Power
Not less than 60 bhp
6
Torque
Not less than 190 Nm
7
Steering
Power assisted steering
8
Fuel tank capacity
Not less than 55 litre
9
Wheel & tyres
Radial
10
Wheel Type
4 X 4 (4WD)
11
Emission Compliance
BSIV
Conditions
I.
General
1.
Competent Original Equipment Manufacturers or their authorised dealers with adequate stock and spares and
repair capabilities for the fabrication can participate in the e-tender.
2.
The Vehicle chassis should conform to the technical standards and specifications attached to this notice and
should be supplied as per the directions of this Department.
3.
For obtaining Digital Signature Certificate (DSC) and necessary portal enrolment bidders can visit the website
https://etenders.kerala.gov.in.
4.
All bid/tender documents are to be submitted online only and in the designated Online Cover (s)/envelope (s) in
the www.etenders.kerala.gov.in website.
5.
The tender fee and EMD shall be received only through online payment SBI/SBI NEFT
6.
e-Tenders submitted manually/through post will not be entertained.
7.
Late e-tenders will not be accepted.
8.
Rates should be quoted in Indian Currency including all taxes, transportation charges, TP etc.
737
1398
KERALA GAZETTE
[PART III
730
9.
Pamphlets, Photograph, Drawings, CD etc. should be forwarded/uploaded along with the e-tender.
10.
The Vehicle Chassis should be delivered within 21 days from receipt of supply order.
11.
100% payment will be effected against delivery at Thiruvananthapuram.
12.
A Warranty of 36 months from the date of acceptance of the item by the Department shall be provided by
the supplier.
13.
A valid Temporary Registration Certificate (T.P.) shall be produced before the Department at the time of delivery.
14.
If the supplier is not in a position to repair the equipment or accessories provided in the vehicle, they shall
arrange for total replacement of that particular item, as the case may be upto a period of 3 years from the date
of acceptance of the vehicle chassis by the Department at Thiruvananthapuram.
15.
The vendor should provide service assistance and supply of spare parts for a period of minimum 5 years after
the expiry of warranty period within 30 days from the date of reporting complaint.
16.
Anybody attempting to offer bribe or otherwise influence in any manner the officials of the Kerala Forest
Department or its supervisory levels in the Government will be disqualified.
17.
All other charges and expenses related should be borne by the supplier.
18.
Bidders will be directed to the payment gateway page of the State Bank of India. There are two options–State
Bank of India (SBI) Net banking payment, payment through NEFT from other Banks to the payment
gateway of SBI.
19.
Tenders will be opened online in the presence of such tenderers or their authorized representatives who have
logged in before the prescribed time of opening of technical & financial bids.
20.
If the date fixed for opening happens to be a holiday/unable to open the tender due to technical issues, the
tenders will be opened in the next working day, at the same time and place.
21.
The tenderer or his representative, shall be physically present at Forest Headquarters on the date prescribed,
with necessary documents and presentations on all the technical aspects of the vehicle to be fabricated and
accessories for the complete understanding of the evaluation committee and verification.
22.
The offer of any firm, which fails to represent in the presentation and evaluation in the prescribed date and time
or fails to give complete details of the supply including accessories during presentation, will be rejected.
II.
Penalty
In case the successful tenderer could not supply the items as per the agreement within the specified delivery period,
penalty will be charged @ 1% of the total value of the contract for the initial first month after the allowed supply period and
thereafter enhancement @ 2% of the value of the contract for each subsequent month of delay in supply and installation,
subject to a maximum of 5%. In case the contract is not completely and satisfactorily performed, the Kerala Forest
Department has the right to terminate the contract and to arrange at the risk and cost of the successful tenderer to supply and
work from alternate sources at their discretion and to forfeit the security deposit. The cost of making alternative arrangement
will also be recovered from the tenderer.
In the case of extension of time the tenderer may request to the Agreement Authority well in advance, if extension is
required. Considering the eligibility of the request, if Agreement Authority satisfies about the situation, a fair and reasonable
extension of time for completion of the work can be allowed with or without imposing penalty as the authority deems fit.
III. E-tender Cover System
The tender has two covers.
1. Technical cover
2. Financial cover
1. The first cover i.e.: the technical cover shall be uploaded with the following document.
(i)
The bidder should upload duly signed copies of all tender papers and all the supporting documents
prescribed in the tender notice.
738
16th OCT. 2018]
STORES PURCHASE
1399
731
(ii)
Valid PAN and ID proof of the Manufacturer/Supplier.
(iii)
Valid GST Registration Certificate of the Manufacturer/Supplier.
(iv)
Valid vehicle dealership certificate issued by competent authority (RTO concerned)
(v)
List of service centres in Kerala and South India.
(vi)
The Bidder should prepare the specification compliance statement in the prescribed proforma
(Format–I) and upload it duly signed. The Specification Compliance Statement should contain all the
details in the Departmental technical specifications and the compliance to the same to be properly
marked and deviation, if any, shall be marked in the compliance statement.
(vii) Scanned copy of the agreement in the prescribed format (Format–II) in Kerala Stamp Paper
worth ` 200.
(viii) Brochures of the product intended to supply.
(ix)
Work experience certificate, O.E.M. Authorisation Letter and other relevant details.
(x)
Last 3 years balance sheet, audit report of CAs & turnover.
2. The second cover i.e.: the Financial Bid Cover
(i)
The rate can be quoted in the BOQ.
(ii)
Rates should be quoted in Indian currency including all taxes, 3rd party insurance, transportation
charges, Temporary Registration Certificate (T.P.) etc.
(iii)
Financial evaluation will be done based on the total amount quoted for the supply of Vehicle chassis.
IV. Tender Opening and evaluation
(a) There will not be any further communications about the opening of the technical and financial bids
separately. Soon on opening the technical bid of e-tenders, the committee constituted to evaluate the
technical aspects, will meet and scrutinize the technical specification of equipment submitted with the
e-tender.
(b) During evaluation, the tenders will be first evaluated for the compliance of Departmental Technical
Specification. Only those tenders which comply the Departmental Technical Specifications will be
considered for subsequent financial evaluation.
(c) The financial bid belonging to those manufactures/dealers/suppliers who qualified in the technical bid of the
equipment as required above by the Kerala Forest and Wildlife Department alone will be considered subject
to the conditions in Administrative Sanction or any other directions from the Government.
(d) On finalization of technical evaluation, the second cover i.e. the financial bid of the concerned competent
firm will be evaluated by the Kerala Forest and Wildlife Department for consideration.
(e) The originals of Technical specification compliance statement of the product, agreement in Kerala Stamp
Paper worth ` 200 and Brouchers/Photograph/Diagrams of the fabrication and accessories, OEM
Authorisation Letter, if any and other documents shall be produced before the undersigned soon after the
Financial Bid opening.
(f) After opening the financial bid, financial evaluation will be done and the details will be uploaded in the
financial evaluation field of the e-tender site. The decision of the Departmental Purchase Committee (DPC)
will be final on the admissibility of the tender and thereafter awarding of the contract.
(g) The right of acceptance or rejection of e-tender or cancelling the tender without assigning any reason, at any
stage of tendering, is solemnly vested with the Additional Principal Chief Conservator of Forests
(F, B & A), Kerala Forest and Wildlife Department or a committee appointed by him.
(h) The rules and regulations prescribed for e-tenders by the Government of Kerala/Store Purchase Manual,
Government of Kerala shall be applicable to this e-tender also. If any tenderer wants any clarification on
any aspect of the tender, he/she can send email to [email protected] or fax to 0471-2337538.
739
Gaz. No. 41/2018/DTP (Stores Purchase).
1400
KERALA GAZETTE
[PART III
730
(i) Details with respect to the e-tender and the details of specifications of the item to be purchased can be
obtained from the e-tender website https://etenders kerala.gov.in.
(j) Any legal dispute that may arise in relation to the e-tender formalities will be restricted to the jurisdiction of
Thiruvananthapuram District Court.
(3)
[\º¿ 06/2018˛19]
\º¿ ]n.3/37328(kn)/2018.
2018 sk]v‰w-_¿ 29.
tIcf h\w hIp¸nsâ D]-tbm-K-¯n-\mbn Bdv do¨mÀÖ-_nÄ Bb FÂ.-C.Un. tSmÀ¨v sseäp-I-fpw A©v
^bÀkyq«pIfpw (^pÄskäv), cv ^Ìv FbvUv Inäpw ZÀLmkv ]c-k-y-¯n hnh-cn¡pw{]Im-c-w \ÂIp-¶-Xn-te-¡mbn
Bh-i-ym-\p-k-cWw
]mÀ«vkpIfpw
Ah-bpsS
tÌm¡p-w
DÅ
{]apJ
am\p-^m-Iv¨À,
kπ-bÀ/UoeÀamcnÂ\n¶pw
aÕc kz`mhapÅ ZÀLmkpIÄ £Wn¡p¶p. ta ]cm-aÀin-¨h A\p-_-Ô-ambn hnhcn¡pw {]Imcw \ne-hm-c-¯n-epw
hnh-c-W-¯n-epw
DÅh
BtIXmWv.
CXp
kw_Ôn¨
ZÀLmkv
{]amW§fpw
ZÀLmkv
sjUyqfqIfpw
www.etenders.kerala.gov.in F¶ sh_vsskän e`yamWv. ZÀLmknt\msSm¸w kaÀ¸n¡p¶Xn\pÅ \ncX{Zhyw,
ZÀLmkv ^o F¶nh Fkv._n.sF.þbpsS CâÀs\äv Hm¬sse³ _m¦nwKv hgntbm aäv _m¦pIÄ hgntbm
sSdnt\msSm¸w Hm¬sse\mbn kaÀ¸n¡mhp¶XmWv.
FÃm sSÀ {]amW§fpw www.etenders.kerala.gov.in F¶ sh_vsskän ImWn¨ncn¡p¶ Hm¬sse³
IhdpIfn Hm¬sse\mbn am{Xw kaÀ¸nt¡XmWv. ZÀLmkpIÄ t\cnt«m X]mentem Hm^okn kzoIcn¡p¶XÃ.
Xmakn¨p kaÀ¸n¡p¶ sSdpIÄ \ncp]m[nIw \nckn¡p¶XmWv.
AS-¶¬ XpI—` 5.50 e£w.
\nc-X-{Zhyw (1%)—` 5,500.
Z¿Lmkv ^o—` 900.
hnX-cWw sNt¿-p¶ Imem-h[n—kssπ HmÀUÀ e`n¨v 45 Znh-k-¯n-\Iw
]Ww \ÂIp¶ coXn—{]kvXpX km[\߃ kzoIcn®v 30 Znh-k-¯n-\p-ÅnÂ
ZÀLmkv {]amWw sh_vsskän e`yam¡p¶ XobXn—2018 IvtSm-_¿ 3.
ZÀLmkv sh_vsskän kaÀ¸n¡mhp¶ Ahkm\ XobXnbpw kabhpw—29˛10˛2018, 10 aWn
ZÀLmkv Xpd¡p¶ XobXnbpw kabhpw—2˛11˛2018, 11 aWn
aqe-y-\nÀ®bw \nÀÆ-ln-¡p¶ XobXn—3˛11˛2018, 11 aWn
ZÀLmkv Xpd¡p¶ Øew—h\whIp∏v Bÿm\w, hgp-X-bv¡m-Sv, Xncp-h-\-´-]p-cw.
ta¸dª FÆ߃ Dt±iw am{X-am-Wv. ChbpsS FÆw Iq´p∂Xn\pw Ipdbv°p∂Xn\pw {]kvXpX ZÀLmkv
d±v sN¿p-¶-Xn-\papÅ ]qÀ® A[n-Imcw ZÀLmkv £Wn¡p¶ A[nImcnbn \n£n-]vX-am-Wv.
Hm¬sse³ sSdnt\msSm¸w ` 200˛s‚ tIcf Ìm¼v t]¸dn X¿mdm¡n H¸n« {]nenan\dn F{Knsaâv kvIm³
sNbvX tIm¸n Hm¬sse\mbn kaÀ¸nt¡Xpw AhbpsS AÊ ZÀLmkv Xpd°p∂Xn\v apºv kaÀ¸nt¡Xpw
AÃm¯]£w Sn ZÀLmkpIÄ bmsXmcp Adnbn¸pw IqSmsX \nckn¡p¶XpamWv. CþsSdpambn _Ôs¸« hnhc§Ä
www.etenders.kerala.gov.in-˛bn \nt¶m sh_vsskän ]dªncn¡p¶ CþsSÀ sl¸v sUkvIn \nt¶m Hm^okv
kab¯v Cu Hm^okn \nt¶m (t^m¬ 0471þ2529213) Adnbmhp¶XmWv. Cþt]bvaân\v Bhiyamb hnhc§Ä
(IcmdpImc³ CS]mSp \S¯p¶ tImÀ _m¦nwKv kuIcyapÅ _m¦v A¡unsâ hniZ hnhc§fpw CþsabnÂ
A{UÊpw) ZÀLmknt\msSm¸w kaÀ¸nt¡XmWv. Cu hnhc§Ä DÄs¸Sp¯m¯ ZÀLmkpIÄ \nckn¡s¸Sp¶XmWv.
ZÀLm-kp-Ifpw aäv A\p-_-Ô-§fpw A]vtemUv sN¿p¶Xnepw aäpw DmIp¶ AkuIcy§Ä¡pw \jvS¯n\pw
h\w-h-Ip¸v D¯chmZn Bbncn¡p¶XÃ.
740
16th OCT. 2018]
STORES PURCHASE
1401
731
[No. 06/2018-19]
No. P3-37328(C)/2018.
29th September 2018.
The Kerala Forest Department invites competitive online tenders from competent Original Equipment Manufacturers or
from their authorised dealers/suppliers with adequate stock and spares and repair capabilities for the ‘Supply of LED Torch
(Rechargeable), 6 Nos., Fire Suit (full set) (5 Nos.) and First Aid Kit (2 Nos.) as per the specifications of this Department. The
materials should conform to the technical standards and specifications attached to this notice. Tender documents and
schedules are available in the website: www.etenders.kerala.gov.in. The Earnest Money Deposit (EMD) and tender fee should
be submitted through the Internet online banking of SBI or troug NEFT for other Banks.
All bid/tender documents are to be submitted online only and in the designated online cover(s)/envelope(s) in the
www.etenders.kerala.gov.in website and tenders submitted manually/through post will not be entertained. Late tenders will
not be accepted.
PAC—` 5.50 lakhs.
EMD (1 %)—` 5,500.
Tender fee—` 900.
Security Deposit—5% of total contract amount to be furnished as bank guarantee of a Scheduled Bank.
Period of supply—Within 45 days from the receipt of the supply order.
Mode of Payment—Within 30 days from the date of acceptance of materials.
Date from which the e-tender will be available in the official website of KFD—From 3rd October 2018.
Last date & time of receipt of e-tender—29-10-2018, 10 a. m.
Opening of e-tender—2-11-2018, 11 a. m.
Date of Presentation & Evaluation—3-11-2018, 11 a. m.
Venue of opening of e-tender—Forest Headquarters, Vazhuthacaud, Thiruvananthapuram, Kerala.
The number of items mentioned above is approximate. The KFD will be at liberty to increase or decrease the number to
be procured/installed or may decide not to procure at all.
Online tenders/bids are to be accompanied with a preliminary agreement executed on Kerala Stamp Paper worth ` 200.
Tenders/bids received online without the scanned copies of relevant documents, preliminary agreement, will not be
considered and shall be summarily rejected. Any further clarifications regarding this tender can be obtained from NIC/the
e-tender Helpdesk number available in the www.etenders.kerala.gov.in website and from the office of the Additional
Principal Chief Conservator of Forests (F, B & A) during the office hours (Ph : 0471–2529213). The details regarding
e-Payment (Bidder’s Bank Account No. where he/she is having core banking facility and email ID) should be submitted along
with the tender. Tenders without these details will not be accepted.
The Forest Department will not be responsible for any inconveniences or loss to the Bidder while uploading/
downloading the bid.
TECHNICAL STANDARDS AND SPECIFICATIONS
Kerala Forest Department decided to purchase LED Torch (Rechargeable) Fire Suit (Full Set) and First Aid Kit for the
use in Forest Department. Detailed Technical Specification for the same are furnished below.
741
1402
KERALA GAZETTE
[PART III
730
I.
Specification of LED Torch (Rechargeable) (6 Nos.)
Bulb— 3W
Range—above 1500 Mtr.
Battery—Ni–Cad—not less than 7000 mAh
Body—Aircraft aluminium alloy
II.
Specification of Fire Fighting Suit (5 Nos.)
Each fire fighter suit should consist of one fire fighter jacket, one pants, One fire fighter hood, one pair of fire fighter
boots and one pair fire fighter gloves.
Standards
EN 469—2005 level-2 or latest version for fire proximity suits
EN 659—2008 or latest version for protective gloves
EN 13911—2004 or latest version for hoods
EN 15090—2012 type 2 or latest version for Fireman Boot
EN 443—2008 or latest version for Helmet with visor
Jacket
·
Three Layered Fire Fighter Suit should be made of inherently flame retardant material
·
Colour : Blue
·
Fire fighter Jacket should be provided with FR Zipper and FR Velcro ( Hook & Loop )
·
The Zipper should be Concealed by a flap of the outer shell with Velcro provision for extra protection
·
Under the armpits special features should be provided for easy movement of Arms
·
At the wrist FR Knitted material should be provided for firm fit and to ensure that heat is not transmitted through the
wrists
·
Reflective stripes.
Should be in line with visibility regulations as per Annex B of EN 469. 2'' FR Reflective stripes (Red -Silver-Red)
around the torso, sleeves, Additional vertical reflective stripes on the front side and slightly v-shaped stripes on the
back side of the jacket. Silver-coloured reflective stripes on the chest
·
Elbows should be ergonomically shaped with reinforcements made of flame-retardant, silicon-carbon coated
Para-aramid fabric
·
Two pockets with flaps at the bottom half on both sides and a pocket on the inside of the jacket with zipper for
closure and safe keeping of important documents
·
The entire Jacket should be stitched with FR Threads
·
Name patch with FR Velcro on the right chest
·
The word ‘KERALA FOREST’ in reflective red colour to be provided on the backside of jacket
·
The Jacket should be CE Certified meeting the requirements of EN 469:2005-02. The test report for the compliance
should be attached with the product
·
It should also pass through Ralph Manikin Testing as per ISO 13506:2008. Necessary Test Report to be enclosed
·
Article 11B Certificate for the Jacket showing name of the Manufacturer and complete address of the place of
production certifying PPE Category III Compliance is Mandatory
742
16th OCT. 2018]
STORES PURCHASE
1403
731
Pants
·
Fire Fighter Pant should be provided by two FR Zippers on the sides for easy wear and removal with comfort since
speed is essential to the fire fighter while wearing or removing
·
Colour : Blue
·
The FR Velcro should ensure that the zippers are concealed with flaps and held in place at the waist
·
FR Elastic should be provided at the waist for firm fit
·
Two side pockets should be provided for storing any important accessories
·
An additional layer of outer shell FR and Antistatic Fabric at the knee portion for additional reinforcement to
enhance the life of the garment during kneeling or any such rigorous fire and rescue operation should be provided
·
A pocket at the side thigh portion should be provided for holding a fire axe or any other tools
·
Reflective stripes should be there (Red -Silver-Red) around pant legs, silver-coloured reflective stripes vertically on
the pants legs
·
Knees should be Ergonomically shaped, with reinforcements and sewn-in knee pads made of water repellent
cellulose rubber
·
The pant should be CE certified meeting the requirements of EN 469 :2005-02, The test report for the compliance
should be attached with the product
·
It should also pass through Ralph Manikin Testing as per ISO 13506: 2008. Necessary Test Report to be enclosed
·
Article 11B Certificate for the Pant, showing name of the Manufacturer and complete address of the place of
production certifying PPE Category III Compliance is Mandatory
·
Material combination of the jacket & the pant should be as follows:
OUTER SHELL
Nomex III A, aramide fabric (a blend of aramide, para aramide) and shall be
antistatic.
MOISTURE BARRIER
PU/PTFE Membrane, inherently flame retardant fabric on basofil/Inherent
Non Woven Fabric.
THERMAL LINER
FR felt quilted to FR Face cloth.
Helmet with Visor
1. Helmet with visor should be Certified to EN 443: 2008 or NEPA 1971: 2007 standards or higher.
2. Helmet should be Red/Yellow-green/White/Orange in colour.
3. Helmet should be made of Composite Fibre Glass capable of providing full protection even against shorter flash over
flame temperature exposures of up to minimum 1000°C. (Test Certificate for the same should be provided).
4. Helmet with visor should have a modular design whereby the head is completely protected against flames.
5. Visor provided should be capable of withstanding extreme heat, impact.
6. Visor should be retractable type and should go inside the helmet shell when retracted.
7. The design of the Helmet should facilitate the passage of air inside the helmet.
8. The helmet should have provision for fixing 2 attachments together (Torches, Communication System etc.)
Gaz. No. 41/2018/DTP (Stores Purchase).
743
1404
KERALA GAZETTE
[PART III
730
9. The helmet should have a Neck Guard made of Flame Retardant Materials.
10. The helmet should have a possibility of wearing goggles or Breathing Mask with the visor pulled down.
11. Weight of the helmet with visor should be 1.5kg. (Approx.)
12. Interior shock absorption feature should be available for fitting various head size circumference (52-66) cm of
fireman.
13. The helmet shall be provided with a detachable light on the front to facilitate the wearer with enough light to work in
darkness. The light shall have minimum luminescence of 100 lumen, shall be intrinsically safe and shall have IP 67
rating. The light shall have minimum 5 hours runtime at low beam and Minimum 1 hour runtime at High beam. The
light shall be provided with rechargeable Lithium Batteries. Charger shall be supplied along with each helmet.
14. Sample should be produced before the Technical committee for technical evaluation as and when asked.
15. A warranty of 12 months shall be provided by the supplier.
Fire Fighter Boot
Colour
Yellow
Size range
38 to 48
Material
Rubber compounds containing fire extinguishing additives, mixed FR cotton fabric lining giving
increased abrasion resistance, sock lining increasing antistatic properties.
Outsole
With Steel anti-perforation insert, resistant to oil, fuels, acids and temperature to 250 Degrees C
and antistatic construction.
Insole
With anatomic replaceable innersole washable in water, absorbing treads energy in heel.
Weight
2 to 2.5 kg per pair.
·
The boot should be CE Certified meeting the requirements of EN 15090 type 2, The test report for the compliance
should be attached with the product.
·
It should also pass through Ralph Manikin Testing as per ISO 13506: 2008. Necessary Test Report to be enclosed.
·
Article 11B Certificate, showing name of the Manufacturer and complete Address of the place of production
Certifying PPE Category III Compliance is Mandatory.
Gloves
Outer Shell
Heat Resistant FR Leather
Second layer
Aramid Knit Fabric
Lining
Membrane
Thermal final Layer
FR Fleece fabric
Retro reflective Trim on Back side
3M
744
16th OCT. 2018]
STORES PURCHASE
1405
731
Design
Fire fighter gloves should be of Five finger type made from heat resistant FR Leather having the thermal lining of
aramid knit fabric and Water proof membrane lining and final layer of FR Face cloth lining. The Fire Fighter Gloves
should have FR Knitted rib at the wrist portion to have the better grip. Fire fighter gloves should CE marked
Certified to EN 659 Standard and, The test report for the compliance should be attached with the product. The
gloves should provided with retro reflective trim on back side to have the better visibility. Article 11A or 11B
Certificate for the Gloves Certifying PPE Category III Compliance is Mandatory.
Fire Fighter Anti-Flash Hood
The hood shall be made from inherently flame retardant knitted fabric. The hood shall protect the Fire Man from
any flash of heat. The hood should be EN approved as per EN 13911 and CE marked. Article 11B Certificate for the
hood showing the place of manufacture.
General
·
All the above mentioned items shall be supplied in sturdy carry case along with the CE Certificate for above
mentioned standards.
·
Authorisation from the Fibre supplier to the manufacturer of Fire Suit (Jacket & Pant) along with TLA (Trade
Licence Agreement) between the Fibre Supplier and Manufacturer of Fire Suit (Jacket & Pant) to sell the product in
India is mandatory. Authorisation must be enclosed along with the offer.
·
Authorisation from the Manufacturer of Fireman Boot to the bidder against the tender is mandatory.
·
Authorisation from the Manufacturer of Fireman Gloves & Hood to the bidder against the tender is mandatory.
·
Authorisation letter should be uploaded along with Technical Bid.
·
Make, Brand and Model No. shall be mentioned and catalogue to be uploaded.
·
Article 11B Certificate for the Fire Suit (Jacket & Pant), Hood and Gloves should mandatory.
·
The Fire Suit should be tested for Heat and Flame Protection as per Manikin Test Standard ISO 13506. This standard
will predict Burn injury giving rise to pain arising out of 1st, 2nd and 3rd Degree Burn.
III. Technical Specification of Medical First Responder/ Basic Life Saving Kit (First Aid Kit) (2 Nos.)
Sl. No.
Items
Nos.
(1)
(2)
(3)
1
MFR Bag
1
2
Soft Stretcher
1
3
Examination Gloves Pair
10
4
LED Torch Light with Battery
1
5
Face Mask 10 Pcs
1
6
Digital Thermometer
1
7
Normal Saline 100ml
1
8
Kindney Tray Plastic
1
9
Syringes 10ml
2
10
Syringes 5ml
2
11
Syringes 2ml
2
745
1406
KERALA GAZETTE
[PART III
730
(1)
(2)
(3)
12
Hand Sanitizer 50ml
2
13
Meassuring Cup 50ml
1
14
Adhesive Plasters
25
15
Cotton Wool 50gms
1
16
Sterile Wound Dressing 3 Sizes
3
17
Paracetamol 500MG, 10'S
2
18
Antiseptic Cream 10gms
3
19
Sterile Gauze Swabs Pack of 10's
1
20
Instant Cold Compress
3
Conditions
I.
General
1. Competent manufacturers or their authorised dealers/suppliers with adequate stock and spares and repair
capabilities for the supply can participate in the e-tender.
2. The materials should conform to the technical standards and specifications attached to this notice and should be
supplied as per the directions of this Department.
3. Any firm whose Proprietor, Partner or Director is involved in a Vigilance Case has been charge sheeted and
pending trial at court in connection with fabrication/supply of similar product made earlier to this
department/Kerala Government are not eligible to participate and shall be barred from participating in
this e-tender.
4. The tenderers should produce latest solvency certificate of ` 1 Lakh or more.
5. The bidder should have supplied at least 10 Nos. during the last 3 years. The copies of supply order for supplies
placed by States, Union Territories, and Public Sector Undertakings during the Calendar Year 2015, 16 & 17
should be produced in support of previous experience.
6. For obtaining Digital Signature Certificate (DSC) and necessary portal enrolment bidders can visit the website
https://etenders.kerala.gov.in.
7. All bid / tender documents are to be submitted online only and in the designated Online Cover(s)/envelope(s) in
the www.etenders.kerala.gov.in website.
8. The tender fee and EMD shall be received only through online payment SBI/SBI NEFT.
9. e-tenders submitted manually/through post will not be entertained.
10. Late e-tenders will not be accepted.
11. Rates should be quoted in Indian currency including all taxes and transportation charges.
12. Pamphlets, Photograph, Drawings, CD etc. should be forwarded/uploaded along with the e-tender.
13. The materials should be delivered within 45 days from receipt of supply order.
14. 100% payment will be effected against delivery at Thiruvananthapuram and acceptance by an acceptance
committee.
15. A Warranty of 12 months for Fire Suit & First Aid Kit and 36 months for the LED Torch from the date of
acceptance of the item by the Department shall be provided by the supplier.
16. If the supplier is not in a position to repair the equipment or accessories provided, they shall arrange for total
replacement of that particular item, as the case may be up to a period of 3 year from the date of acceptance of
the materials by the department at Thiruvananthapuram.
746
16th OCT. 2018]
STORES PURCHASE
1407
731
17. The vendor shall be responsible for the maintenance of the materials for any defects or damages due to bad
workmanship or of any inferior quality material, accessories, apparatuses etc.
18. Anybody attempting to offer bribe or otherwise influence in any manner the officials of the Kerala Forest
Department or its supervisory levels in the Government will be disqualified.
19. All other charges and expenses related should be borne by the supplier.
20. Bidders will be directed to the payment gateway page of the State Bank of India. There are two options – State
Bank of India (SBI) Net banking payment, payment through NEFT from other banks to the payment gateway
of SBI.
21. Tenders will be opened online in the presence of such tenderers or their authorized representatives who have
logged in before the prescribed time of opening of technical & financial bids.
22. If the date fixed for opening happens to be a holiday/unable to open the tender due to technical issues, the
tenders will be opened in the next working day, at the same time and place.
II.
Penalty
In case the successful tenderer could not supply the items as per the agreement within the specified delivery period,
penalty will be charged @ 1% of the total value of the contract for the initial first month after the allowed supply period and
thereafter enhancement @ 2% of the value of the contract for each subsequent month of delay in supply and installation,
subject to a maximum of 5%. In case the contract is not completely and satisfactorily performed, the Kerala Forest
Department has the right to terminate the contract and to arrange at the risk and cost of the successful tenderer to supply and
work from alternate sources at their discretion and to forfeit the security deposit. The cost of making alternative arrangement
will also be recovered from the tenderer.
In the case of extension of time the tenderer may request to the Agreement Authority well in advance, if extension is
required. Considering the eligibility of the request, if Agreement Authority satisfies about the situation, a fair and reasonable
extension of time for completion of the work can be allowed with or without imposing penalty as the authority deems fit.
III. E-tender Cover System
The tender has two covers.
1. Technical cover
2. Financial cover
1. The first cover i.e., the technical cover shall be uploaded with the following document.
(i)
The bidder should upload duly signed copies of all tender papers and all the supporting documents
prescribed in the e-tender notice.
(ii)
Valid PAN and ID proof of the Manufacturer/Dealer/Supplier.
(iii)
Valid GST Registration Certificate of the Manufacturer/Dealer/Supplier.
(iv)
The Bidder should prepare the specification compliance statement in the prescribed proforma (Format–I)
and upload it duly signed. The Specification Compliance Statement should contain all the details in the
Departmental technical specifications and the compliance to the same to be properly marked and
deviation, if any, shall be marked in the compliance statement.
(v)
Scanned copy of the agreement in the prescribed format (Format–II) in Kerala Stamp paper
worth ` 200.
(vi)
Brochures of the product intended to supply.
Gaz. No. 41/2018/DTP (Stores Purchase).
747
1408
KERALA GAZETTE
[PART III
730
(vii) Work experience certificate, O.E.M Authorisation Letter and other relevant details.
(viii) Scanned copies of the declaration (Format – III) by the bidder on Kerala Stamp Paper worth ` 200 to the
effect that no Vigilance Case has been charge sheeted and pending trial at Court against him/his partner/s
or any of his directors in connection with fabrication/supply of similar product made earlier to this
Department.
2. The second cover i.e., the Financial Bid cover
(i)
The rate can be quoted in the BOQ.
(ii)
Rates should be quoted in Indian currency including all taxes, transportation charges etc.
(iii)
Financial evaluation will be done based on the total amount quoted for the entire items.
IV. Tender Opening and evaluation
(a) There will not be any further communications about the opening of the technical and financial bids
separately. Soon on opening the technical bid of e-tenders, the committee constituted to evaluate the
technical aspects, will meet and scrutinize the technical specification of equipments submitted with the
e-tender.
(b) During evaluation, the tenders will be first evaluated for the compliance of Departmental Technical
Specification. Only those tenders which comply the Departmental Technical Specifications will be
considered for subsequent financial evaluation.
(c) The financial bid belonging to those manufactures/dealers/suppliers who qualified in the technical bid of the
equipment as required above by the Kerala Forest and Wildlife Department alone will be considered subject
to the conditions in Administrative Sanction or any other directions from the Government.
(d) On finalization of technical evaluation, the second cover i.e., the financial bid of the concerned competent
firm will be evaluated by the Kerala Forest and Wildlife Department for consideration.
(e) The originals of Technical specification compliance statement of the product, agreement in Kerala Stamp
Paper worth ` 200, the declaration on Kerala Stamp Paper worth ` 200 and Brouchers/Photograph/
Diagrams of the fabrication and accessories, OEM Authorisation Letter, if any, and other documents shall
be produced before the undersigned soon after the Financial Bid opening.
(f) After opening the financial bid, financial evaluation will be done and the details will be uploaded in the
financial evaluation field of the e-tender site. The decision of the Departmental Purchase Committee (DPC)
will be final on the admissibility of the tender and thereafter awarding of the contract.
(g) The right of acceptance or rejection of e-tender or cancelling the tender without assigning any reason, at any
stage of tendering, is solemnly vested with the Additional Principal Chief Conservator of Forests
(F, B & A), Kerala Forest and Wildlife Department or a committee appointed by him.
(h) The rules and regulations prescribed for e-tenders by the Government of Kerala/Store Purchase Manual,
Government of Kerala shall be applicable to this e-tender also. If any tenderer wants any clarification on
any aspect of the tender, he/she can send email to [email protected] or fax to 0471-2337538.
(i) Details with respect to the e-tender and the details of specifications of the item to be purchased can be
obtained from the e-tender website https//etenders kerala.gov.in.
(j) Any legal dispute that may arise in relation to the e-tender formalities will be restricted to the jurisdiction of
Thiruvananthapuram District Court.
Office of the Addl. Principal,
Chief Conservator of Forest,
(F, B & A), Thiruvananthapuram.
(Sd.)
Additional Principal Chief Conservator
of Forests (F, B & A)
(For and on behalf of the Governor of Kerala).
748
16th OCT. 2018]
STORES PURCHASE
1409
]p\¿ C˛Z¿Lmkv ]ckyw
\º¿ Iyq.kn 2˛270/2017.
2018 sk]v‰w-_¿ 24.
tIcf Kh¿Æ¿°p-th≠n sIm√w Z£nW taJe No^v t^mdÃv I¨k¿th-‰¿ & F^v. Un. F. sNb¿ams‚
A[o\Xbnep≈ ]p\eq¿ Unhn-j-\nse Xmsg ]dbp∂ ÿe-ß-fn¬ 5 sse≥ tkmfm¿s^≥knwKv ÿm]n-°p∂
{]hr-Øn-Iƒ°v KpW-\n-e-hm-c-ap-≈Xpw ISO AwKoIm-c-ap-≈-Xp-amb kma-{Kn-Iƒ D]-tbm-Kn®v h\w-˛-h-\y-Pohn hIp-∏ntem
a‰v k¿°m¿ hIp-∏p-I-fntem CØcw {]hr-Øn-Iƒ sNbvXv 5 h¿j-Øn¬ Ipd-bmØ ap≥]-cn-N-b-ap≈ s]mXp-a-cm-aØv
hIp-∏n¬ cPn-ÿ sNbvXn-´p≈ \n›nX tbmKy-X-bp≈ Icm-dp-Im-cn¬/ÿm]-\-ß-fn¬ \n∂pw Hm¨sse≥ Z¿LmkpIƒ
£Wn-°p∂p. Sn {]hr-Øn-Iƒ°v Hcp h¿jw hmd-≠nbpw XpS¿∂v 3 h¿jw AMC-bpw D≠m-bn-cn°p-∂-Xm-Wv. Z¿Lmkv
{]am-W-ßfpw Z¿Lmkv sjUyq-fp-Ifpw www.etenders.kerala.gov.in F∂ sh_vssk‰n¬ e`y-am-Wv. Z¿Lm-kn-t\m-sSm∏w
ka¿∏n-°p-∂-Xn-\p≈ \nc-X-{Zhyw, Z¿Lmkv {]amW hne F∂nh SBI-bpsS Internet online Banking hgn-tbm a‰v _m¶p-
IfpsS Imcy-Øn¬ NEFT hgntbm Hm¨sse≥ sS≠-dn-t\m-sSm∏w ka¿∏n-t°-≠-Xm-Wv.
F√m sS≠¿ {]am-W-ßfpw www.etenders.kerala.gov.in F∂ sh_vssk-‰n¬ ImWn-®n-cn-°p∂ Hm¨sse≥
Ih-dp-I-fn¬ Hm¨sse-\mbnam{Xw ka¿∏n-t°-≠-Xm-Wv. Z¿Lm-kp-Iƒ www.etenders.kerala.gov.in F∂ sh_vssk‰n-eqsS
Hm¨sse-\mbn am{Xta kzoI-cn-°p-I-bp-≈q. t\cnt´m X]m¬am¿§tam e`n-°p∂ Z¿LmkpIƒ Hcp
Imc-W-h-imepw kzoI-cn-°p-∂-X-√. \nivNnX ka-b-]-cn-[n-°p-tijw e`n-°p∂ sS≠-dp-Iƒ kzoI-cn-°p-∂-X-√.
Z¿Lmkv t^md-Øns‚ hne, {]hr-Øn-bpsS Dt±-in-°p∂AS-¶¬ XpI F∂nh Xmsg-]-dbpw {]Im-c-am-Wv. Sn
hnh-c-߃ GI-tZiw am{X-am-Wv. bYm¿∞ XpIbpw hnh-c-ßfpw Hm¨sse\n¬ e`y-am-bn-cn-°pw.
Unhnj≥—]p\eq¿.
{]hrØnbpsS t]cpw Dt±i AS-¶¬ XpIbpw—Supply, installation, commissioning and maintenance of solar
power fencing (including warranty for 1 year and 3 years AMC) at Poombara colony to Neduvannoorkkadavu
in Kalamkunnu Section of Anchal range during 2017-18 (2 km)—` 4,17,000.
\nc-X-{Zhyw—` 10,500.
Z¿Lmkv t^mdØns‚ hne—` 850 + G. S. T.
Z¿Lmkv {]amWß-fpsS hn¬∏\—www.etenders.kerala.gov.in F∂ sh_vssk-‰n¬ \n∂pw Uu¨temUv
sNøm-hp-∂-Xm-Wv.
Icm-dp-Im-cpsS ¢m v—A, B, C & D Class.
Unhn-j≥/sdbn©v—]p\-eq¿ Unhn-j≥, A©¬ sdbn©v.
{]hrØn sNbvXp Xo¿t°≠ Imem-h[n—25 Znhkw.
Z¿Lmkv {]amWw sh_vssk-‰n¬ e`y-am-Ip∂ Xob-Xnbpw ka-bhpw—17˛1-0˛2018 cmhnse 10 aWn apX¬.
Z¿Lmkv sh_vssk-‰n¬ ka¿∏n-°m-hp∂ Xob-Xnbpw ka-bhpw—17˛1-0˛2018 cmhnse 10 aWn apX¬ 30-˛10-˛2018
sshIn´v 5 aWn hsc.
Z¿Lmkv Xpd°p∂ Xob-Xnbpw ka-bhpw—31-˛10-˛2018 D®-bv°p-tijw 3 aWn.
Hm¨sse-≥ sS≠-dn-t\m-sSm∏w ` 200-˛s‚ tIcf k¿°m-cns‚ ap{Z-∏-{X-Øn¬ Xøm-dm°n H∏n´ {]mY-anI DS-ºSn
kvIm≥ sNbvX a‰p tcJ-I-fpsS ]I¿∏v EMD Hgnhm°p-∂-Xn-\p≈ k¿´n-^n-°‰v (D-s≠-¶n¬) apX-em-bh Hm¨sse-\mbn
ka¿∏n-t°-≠Xpw C{]-Imcw Hm¨sse-\mbn ka¿∏n-°p∂ tcJ-Iƒ kv]oUvt]mÃv/cPn.-t]mÃv Bbn sIm√w
Z£nW taJe No^v t^mdÃv I¨k¿th-‰¿ & F^v. Un. F. sNb¿am≥, h\-{io, Nn∂-°S, sIm√w-˛ --691 001
ap≥]msI sS≠-¿ Xpd-°p∂ XobXn°pap≥]mbn ka¿∏n-t°≠Xp-am-Wv. C{]-Imcw ka¿∏n-°m-ØXpw Ah-bpsS
Hdn-Pn-\¬ sS≠¿ Xpd-°p-∂-Xn-\p-apºv ka¿∏n-°m-Ø-Xp-amb Z¿Lm-kp-Iƒ \nc-kn-°-s∏-Sp-∂-Xm-Wv. C˛-sS-≠-dp-ambn
_‘-s∏´ a‰p hn-h-c-߃ NIC/KITM˛¬ \nt∂m www.etenders.kerala.gov.in F∂ sh_vssk-‰n¬ ]d-™n-cn-°p∂
contact us˛¬ \nt∂m Cu Hm^o-kn¬ \nt∂m Hm^okv ka-bØv Adn-bm-hp-∂-Xm-Wv. C˛-t]sa‚n\v Bh-iy-amb
hnh-c-߃ (I-cm-dp-Im-c≥ CS-]mSp \S-Øp∂ tIm¿ _m¶nwKv kuI-cy-ap≈ _m¶v A°u-≠ns‚ hni-Z-hn-h-c-ß-fpw
C˛-sa-bn¬ A{Ukpw) Z¿Lm-kn-t\m-sSm∏w ka¿∏n-t°-≠-Xm-Wv. Cu hnh-c-߃ Dƒs∏-Sp-ØmØ Z¿Lm-kp-Iƒ \nc-kn-°p-
∂-Xm-Wv. sSIv\n-°¬ _nUpw ^n\m≥jy¬ _nUpw AXn-\mbn ]d-™n-cn-°p∂ AXmXp Ih-dp-I-fn¬ am{Xw
ka¿∏n-t°-≠-Xm-Wv. Icm-dp-Im¿ hnh-c-߃ A]vtemUv sNøp-∂-Xnepw a‰pw D≠m-Ip∂ Aku-I-cy-߃°pw \jvS-Øn\pw
749
16th OCT. 2018]
STORES PURCHASE
1410
h\w hIp∏v DØc-hmZn Bbn-cn-°p-∂-X-√. sS≠¿ Xpd-°p∂ XobXn Hcp s]mXp Ah[nbmbn {]Jym-]n-°p-I-tbm
kmt¶-Xn-I-amb at‰-sX-¶nepw Imc-W-ß-fmtem -sS≠¿ Xpd-°msX h∂m¬ sXm´SpØ {]hrØn Znhkw AtX
ka-bØpw ÿeØpw Z¿Lm-kp-Iƒ Xpd-°p-∂-Xm-bn-cn-°pw. Icm-dp-Im-cp-sStbm Ah-cpsS {]Xn-\n-[n-I-fp-sStbm
km∂n-≤y-Øn¬ sIm√w Z£nW taJe No^v t^mdÃv I¨k¿th-‰¿ & F^v. Un. F. sNb¿am≥ Z¿Lm-kv
Xpd-°p-∂-Xm-Wv. Icm-dp-Imtcm Ah-cpsS {]Xn-\n-[n-I-tfm k∂n-ln-X-c-s√-¶nepw sIm√w Z£nW taJe No^v t^mdÃv
I¨k¿th-‰¿ & F^v. Un. F. sNb¿am≥ Z¿Lm-kv Xpd-°p-∂-Xm-Wv.
Z¿Lmkv kw_-‘-ambn h\w hIp-∏nepw ]n. Uªyq. Un.˛bnepw \ne-hn-ep≈ F√m \n_-‘-\-Ifpw tÃm¿
]¿t®k v dqfpw Cu Z¿Lm-kn\pw _m[-I-am-bn-cn-°pw.
IqS-pX¬ hnh-c-߃ sIm√w Z£nW taJe No^v t^mdÃv I¨k¿th-‰¿ & F^v. Un. F. sNb¿ams‚
Imcym-e-b-Øn¬ \n∂pw (t^m¨ : 0474-˛2742660-) {]h¿Øn Znh-k-ßfn¬ e`y-am-Wv.
sI. hnPbm\μ≥ IFS,
No^v t^mdÃv I¨k¿th‰¿,
No^v t^mdÃv I¨k¿th‰dpsS Imcymebw,
Z£nW taJe, sIm√w B‚ v
Z£nW taJe, sIm√w.
sNb¿am≥, F^v.Un.F.
C˛Z¿Lmkv ]ckyw
(1)
[sS≠¿ sFUn_2018_FD 236599_1]
sS≠¿ d^-d≥kv \º¿ 01/2018-˛19/Xr»q¿ FDA SPV PZP.
2018 HIvtSm-_¿ 4.
Xr»q¿ kpthm-f-Pn-°¬ ]m¿°n¬ \gvkdn \n¿Ωm-
W-Øns‚ `mK-am-bp≈ ÿew \nc-∏m-°¬, sjUv lukv
\n¿Ωm-Ww, Pe-hn-X-cW kwhn[m\w G¿s∏-Sp-ج
F∂n-h-bv°mbn kwÿm\/tI{μ k¿°m¿ hIp-∏p-I-fn¬
cPn-ÿ sNbvXn-´p≈ tbmKy-X-bp≈ tIm¨{Sm-IvS¿am-cn¬
\n∂pw tIcf k¿°m-cns‚ C˛-Pn]n sh_vssk‰n-eqsS
(www.etenders.kerala.gov.in) Hm¨sse-\mbn sS≠-dp-Iƒ
£Wn-°p-∂p.
AS-¶¬ XpI—` 16,55,000.
_nUv skIyq-cn‰n XpI—` 41,375.
sS≠¿ ^o—` 2,800.
]q¿Øo-I-cW Imem-h[n—3 amkw.
]cky XobXn—29-˛9-˛2018.
Hm¨sse-\n-eqsS sS≠¿ ka¿∏n-t°≠ XobXnbpw
ka-bhpw—24-˛10˛2018, 5 aWn.
sS≠¿ Xpd-°p∂ XobXnbpw ka-bhpw—29˛10˛2018,
11 aWn.
C˛sS≠¿ kw_-‘n-°p∂ hni-Z-hn-h-c-߃ tIcf
Kh¨sa‚ns‚ C˛-sS-≠¿ sh_vssk‰n¬ {]kn-≤-s∏-Sp-Øn-
bn-´p≈ sS≠¿ ]c-ky-Øn¬ e`y-am-Wv. Hm¨sse≥
sS≠-dns‚ 1˛mw Ih-dn¬ ]d-™n-´p≈ tcJ-I-fpsS
km£y-s∏-Sp-Ønb ]I¿∏p-Iƒ Xr»q¿ kpthm-f-Pn-°¬
]m¿°v Hm^o-kv, ]pØq¿ ]n. H., Ipcn-ip-aq-e,
Xr»q¿˛680 014 F∂ hnem-k-Øn¬ sS≠¿ Xpd-°p∂
ka-Øn-\p-ap≥]v e`y-am-bn-cn-°-Ww. IqSp-X¬ hnh-c-߃
ta¬ Hm^o-kn¬ \n∂pw e`y-amIpw. t^m¨ :- 9447979176.
[Tender ID 2018_FD_236599_1]
Tender Reference No. 01/2018-19/Thrissur FDA SPV PZP.
4th October 2018.
Qualified Contractors registered with State and
Central Government Departments are invited to bid for
the Work of Site Development, Shade House Construction
& Water Supply Arrangements for Establishing
Horticulture Nursery in Puthur Zoological Park through
online bid submission process in the e-GP website of
Kerala Government (www.etenders.kerala.gov.in).
Estimate Amount—` 16,55,000.
Bid Security Amount—` 41,375.
Tender Fee—` 2,800.
Period of completion—3 months.
Publish date—29-9-2018.
Last date and time for online bid submission—
24-10-2018, 5 p. m.
Bid opening date—29-10-2018, 11 a. m.
The details regarding the e-tender are available in the
notice inviting tender published in the e-tender website of
Kerala Government. The hard copy of the documents
mentioned in cover 1 should reach the Office of Thrissur
Zoological
Park,
Puthur
P.
O.,
Kurisumoola,
Thrissur-680 014 before the bid opening date and time.
More details can be had from the above office-
Phone : 9447979176.
750
16th OCT. 2018]
STORES PURCHASE
1411
(2)
\º¿ 2/2018-˛19.
2018 HIvtSm-_¿ 4.
em≥UvkvtI-∏nw-Kv, tlm¿´n-Iƒ®¿ F∂n-hbv-°mbn
hnhn[ C\w ssXIƒ D¬∏m-Zn-∏n®v hnX-cWw sNøp-∂-Xn\v
{]mho-Wy-ap≈ hy‡n-Iƒ, ÿm]-\-߃ F∂n-h-bn¬
\n∂pw ]pØq¿ kpthmf-Pn-°¬ ]m¿°nte°v apf, ]mw
F∂o h¿§-Øn¬s∏´ hnhn[ C\w ssXIƒ Xøm-dm°n
\¬Ip-∂-Xn\v
tIcf
k¿°m-cns‚
C˛-Pn]n
sh_v ssk‰phgn (www.etenders.kerala.gov.in) Hm¨sse-\mbn
sS≠-dp-Iƒ £Wn-°p-∂p.
apf-ssX-Iƒ—10000 FÆw.
]mw C\-Øn¬s∏´ ssXIƒ—10000 FÆw.
_nUv skIyq-cn‰n XpI—BsI Izm´p sNøp∂
XpI-bpsS 2.5 iX-am-\w.
sS≠¿ ^o—` 2,240.
Hm¨sse-\mbn sS≠¿ ka¿∏n-t°≠ Ahkm\
XobXnbpw ka-bhpw—25-˛10˛2018, 5 aWn.
sS≠¿ Xpd-°p∂ XobXnbpw ka-bhpw—30˛10˛2018,
11 aWn.
tPmen ]q¿Øo-I-cW Imem-h[n—12 amkw.
C˛sS≠¿ kw_-‘n-°p∂ hni-Z-hn-h-c-߃ tIcf
Kh¨sa‚ ns‚ C˛-sS-≠¿ sh_vssk‰n¬ {]kn-≤
-s∏-Sp-Øn-bn-´p≈ sS≠¿ ]c-ky-Øn¬ e`y-am-Wv.
Hm¨sse≥ sS≠-dns‚ 1˛mw Ih-dn¬ ]d-™n-´p≈
tcJ-I-fpsS km£y-s∏-Sp-Ønb ]I¿∏p-Iƒ Xr»q¿
kpthm-f-Pn-°¬ ]m¿°v Hm^o-kv, ]pØq¿ ]n. H.,
Ipcn-ip-aq-e, Xr»q¿˛680 014 F∂ hnem-k-Øn¬ sS≠¿
Xpd-°p∂ ka-bØn-\p-ap≥]v e`y-am-bn-cn-°-Ww. IqSp-X¬
hnh-c-߃ ta¬ Hm^o-kn¬ \n∂pw e`y-amIpw.
t^m¨ -: 9447979176.
No. 2/2018-19.
4th October 2018.
Qualified Individuals, Firms, Institutions etc. having
experience in developing seedling for landscaping and
Horticulture are invited to bid for the supply of
seedling of bamboo and palms for planting in Puthur
Zoological Park through online bid submission
process in the e-GP website of Kerala Government
(www.etenders.kerala.gov.in).
Bamboo seedlings—10000 Nos.
Palm seedlings—10000 Nos.
Bid Security Amount—2.5 percent of the total bid
amount.
Tender Fee—` 2,240.
Last date for online bid submission—25-10-2018,
5 p. m.
Bid opening date—30-10-2018, 11 a. m.
Period of completion—12 months.
The details regarding the e-tender are available in the
notice inviting tender published in the e-tender website of
Kerala Government. The hard copy of the documents
mentioned in cover 1 should reach the Office of Thrissur
Zoological
Park,
Puthur
P.
O.,
Kurisumoola,
Thrissur-680 014 before the bid opening date and time.
More details can be had from the above office
Phone : 9447979176.
(Sd.)
Office of the Chief
Chief Conservator of Forests,
Conservator of Forests,
Thrissur & CEO of the SPV for
Thrissur.
Thrissur Zoological Park.
E-TENDER NOTICE
No. D-7392/2016.
26th September 2018.
Online tenders in Two Bid system (Technical and Financial bids) are invited from reputed firms for the “Supply,
Installation, Testing and Commissioning of Solar Fencing” for use in Kerala Forest Department by CEO, FDA,
Mannarkkad. The Solar Fencing should conform to the technical standards and specifications detailed in Annexure A
attached to this notice. Tender documents and schedules are available in the website: www.etenders.kerala.gov.in. The
Earnest Money Deposit and tender fee should be submitted through the Internet online banking of SBI or through NEFT
for other Banks.
All Bid/Tender documents are to be submitted online only and in the designated online cover (s)/envelope (s) on
the www.etenders.kerala.gov.in websiste and tendere submitted manually/through post will not be entertained. Late tenders
will not be accepted.
751
Gaz. No. 41/2018/DTP (Stores Purchase).
16th OCT. 2018]
STORES PURCHASE
1412
Sl.
Tender No. and Item
Length in
PAC
EMD
No.
Kilometer
(in Lakhs)
(2.5%)
Tender
Fee
(approx.)
`
`
`
1
1/2018-19—Construction of New Solar Power Fencing
2 Km.
3.91
9,775
782+141
(5 Strands) from Ummattampadi to Chembuvattakkadu
(GST)=
(Division 1) under Attappady Range
923
2
2/2018-19—Construction of New Solar Power Fencing
3 Km.
5.32
13,300 1,064+192
(5 Strands) from Ummattampadi to Chembuvattakkadu
(GST)=
(Division 2) under Attappady Range
1,256
3
3/2018-19—Construction of New Solar Power Fencing
4 Km.
7.1
17,750 1,420+256
(5 Strands) from Pambanthodu -Cherumala-Odakunnu
(GST)=
under Mannarkkad Range
1,676
4
4/2018-19—Construction of New Solar Power Fencing
3 Km.
5.30
13,250 1,060+191
(5 Strands) from Vettilachola to Inchikunnu under Mannarkkad
(GST)=
Range
1,251
5
5/2018-19—Construction of New Solar Power Fencing
4 Km.
7.10
17,750 1,420+256
(5 Strands) from Aanakarnam to Varappara under Mannarkkad
(GST)=
Range
1,676
6
6/2018-19—Construction of New Solar Power Fencing
10 Km.
17.70
44,250 2,500+450
(5 Strands) from Kottamala to Puliyara under
(GST)=
Agali Range
2,950
Mode of Payment—Online payment after the successful completion of the works.
Place to be delivered—As per Annexure A.
Date and time from which the tender will be available in the website—17-10-2018, 11 a. m.
Last date and time for receipt of tender (Closing of tender)—24-10-2018 at 5 p. m.
Tender opening date and time—27-10-2018 at 11 a. m.
Period for completion—Within 60 days from the date of agreement.
The length in Kilometers mentioned above is approximate. The KFD will be at liberty to increase or decrease the
length/work to be done or may decide not to execute the work at all.
Tenderers are requested to go through the tender conditions before quoting the tender. Online tenders/bids are to
be accompanied with a preliminary agreement executed in Kerala Stamp Paper worth ` 200. Tenders/bids received
online without the scanned copies of relevant documents, preliminary agreement, will not be considered and shall be
summarily rejected. The original copies of the uploaded documents should be submitted to the undersigned on or before
the tender opening date. Any further clarifications regarding quoting on this tender/uploading of tender documents can be
obtained from NIC/the e-tender Helpdesk number available in the www.etenders.kerala.gov.in website. With respect to the
clarifications regarding the tender conditions and execution of works the tenderer can contact the office of the CEO,
FDA, Mannarkkad during the office hours. The details regarding e-Payment (Bidder’s Bank Account No. where he/she is
having core banking facility and email ID) should be submitted along with the tender. Tenders without these details will
not be accepted. Technical bid and financial bid shall be submitted in their respective designated online covers.
First the technical bids will be evaluated. After evaluation of the technical bids, the financial bids of those
tenderers who are qualified in the technical evaluation will be opened.
The Forest Department will not be responsible for any inconveniences or loss to the Bidder while uploading/
downloading the bid.
The Rate/Kilometre and the rate for annual maintenance contract for 3 years beyond the warranty period are to be
quoted separately.
752
16th OCT. 2018]
STORES PURCHASE
1413
ANNEXURE A
Part I Specification of Solar Fencing
The scope of work: includes supply, installation, testing, commissioning of solar power fencing systems.
The basic parameters for fencing will be as following:
1.
Maximum distance between two sections posts—150 Mtr.
2.
Distance between two intermediate posts—6 Metres.
3.
Nos. of lines of wire—5 Nos.
4.
Height of the fence—7 Feet.
TABLE NO. 1
Sl. No.
Name of Location, Village
Range, Division
Tentative length
1
Ummattampadi to Chembuvattakkadu
Attappady Range
2 Km
(Division 1)
2
Ummattampadi to Chembuvattakkadu
Attappady Range
3 Km
(Division 2)
3
Pambanthodu-Cherumala-Odakunnu
Mannarkkad Range
4 Km
4
Vettilachola to Inchikunnu
Mannarkkad Range
3 Km
5
Anakarnam to Varappara
Mannarkkad Range
4 Km
6
Kottamala to Puliyara
Agali Range
10 Km
The scope of work shall also include the following:
A. Supply, installation, testing and commissioning
1.
Collection of all relevant data at the proposed site which is necessary for proper designing, layout,
installation and successful commissioning of the system.
2.
Preparation & submission of realistic and pragmatic engineering designing of all the necessary device/
components and sub-systems that is required for systems. This shall have to be carried out in accordance
with the collected field data and general technical requirements/specifications.
3.
The design details should clearly indicate the number of wire/lines, distance between wires/lines, number of
sections, number of posts, number of corners, number pull through posts, number of intermediate posts and
other accessories and justification of the effectiveness of the fencing against each animal to be controlled.
The following drawings should be submitted with technical bid Part-I.
(a)
A section between two intermediate posts
(b)
Section post
(c)
Corner post
(d)
Gate including both posts showing all the .lines wires and accessories to be fixed.
(e)
Grouting details of posts.
4.
Supply and transportation of all required materials, components, devices, sub-systems and components of
Solar fences to the site and arrangements of safe-keeping and storing them at site.
5.
All the civil works related with installation, commissioning of systems.
6.
Arrangement of all the material, labour, tools and plants etc. required for proper completion and successful
implementation of projects.
753
16th OCT. 2018]
STORES PURCHASE
1414
7.
To provide all essential documents and manuals, clearly explaining the operation and maintenance and trouble
shooting of various portions of the systems.
8.
To impart necessary training to the technicians/users in each village during installation and commissioning of
the systems as well as classroom training after completion of the projects in fault diagnosis and repair.
Part II Guaranteed Technical Specifications of the components to be used for the work
TABLE NO. 2
Description
Specification
Remarks
Yes/No
Base Units
(1)
(2)
(3)
(4)
Energizer
Should be Battery Operated. Switch to high,
1.
Must confirm to all
medium and low power settings. Solar panel
National and International
option to recharge 12 Volt Battery. Full and
Standards of safety and
reduced power output terminal.
should not be fetal to
Should operate at one/different fences
human and animal life.
independently.
Should be capable to energize the length of fence
2.
Registration of the firm in
up to 3 Km. Should be suitable for
any Govt. Depts. (Like
other requirements of the work.
Directorate General of
Operating voltage at 50 K load-10 Kv Maximum.
Supplies and Disposals etc.)
Other parameters with 1 K Load
will be preferred.
Operating voltage—6.0-8.0 Kv-
At High setting
O/p energy—3.5 J minimum—
At High setting
Peak current—7.0 - 8.0 Amps-
At High setting
RMS Current—2.4-2.8 Amps-
At High setting
Output Charge—1.0-1.4 milli-Col.-
At High setting
Fib. Energy—3.5-4.5 MCA-
At High setting
Pulse duration—0.01-3 milli-sec.
Pulse interval—1.1- 1.4 sec.
Solar PV
100 Watts, 12 Volts rating with minimum 10 years
Must be of CEL/BHEL/
Modules
warrantee against manufacturing defects.
REIL/TATA BP Make
Module
GI angle, strips and pole 50 NB. Hot dip
To suit PV module
stand with
galvanized to minimum of 30 microns zinc coating
post
thickness. Tilted to 15 degrees. To be grouted
properly
Battery
12 Volts, 120 Ah low maintenance battery
Must be of Exide/
with 3 year guarantee
Kirlosker/Union make
Lightening
Must be capable of diverting stray Lightening.
With proper earthling
diverter kit
The diverter assembly must be adjustable for
system
spark gaps.
Adequate earthling to be provided.
754
16th OCT. 2018]
STORES PURCHASE
1415
Housing box
Made of 16 gauges GI sheet, painted and fixed
Should be capable
with post
on 100NB, class B pipe, and must be grouted
of housing battery and
energizer.
Accessories
Earthing
Must contain earth mixture capable of retaining
Should be capable of
Yes/No
system
moisture. 8-mm. Diameter stainless steel rod, non-
providing proper earthling
rusting quality of at least 4 feet length
to the system
Strain
Strain Insulator must be of Polycarbonate
UV stabilized & Rainwater
(Please specify
Insulators
material and should withstand 15 KV
run-off should be provided
if better
voltages
on the insulator
technical
specification
is quoted)
PP Reel
Must be of virgin plastic material.
UV stabilized.
Insulators
Polypropylene or equivalent
High tensile
High
2.5 mm. wire dia. High tensile wire with minimum
To be guaranteed for
Tensile wire
of 230-300 gms./sq.m zinc coated thickness.
more than 10 years
UTS 140.5kg/mm2, Break strength of
740 kgs. Zn purity above 99%.
14 gauge
14 gauge wires for binding insulators
High quality zinc coating
wire
Wire
In suit tighteners for proper tensioning of wires
tighteners
should be made from Al-alloy non-rusting quality
Tension
Spring steel capable of taking compression loads.
springs
Galvanized.
Joint
Positive locking mechanism. Zinc coating of more
clamps
than 25 microns.
Warning
Polyethylene plastic with statutory
Yellow with black
sign boards
colour and signs
letter in local language
Lead out
Must be double insulated withstanding 15 KV
For under gate and base
cable
voltages. Inner core wire must be hot dip
unit connection
galvanized
Rope gate
Steel rope with handle and spring assembly.
Length of rope to suit gate
kit
Handle made of polyethylene
width
Tool kit
Should contain : Wire tightener handle, Twisting
tool, Pliers, Double ended spanner for clamp
tightening
Drop chain
12.5 mm loop size (of 12 gauge G. I. Wire)
For rivers and streams
Flood gate
Should be capable of automatically cut off the
To be used in conjunction
controller
current in the drop chains, in case of floods
with drop chains
Cut out
Should be temper proof & capable of withstanding
Provision for switching
switch
high voltage from energizer
off the power, of a
section of the fence by
using a removable key
should be made
(1)
(2)
(3)
(4)
755
Gaz. No. 41/2018/DTP (Stores Purchase).
16th OCT. 2018]
STORES PURCHASE
1416
Elephant
2.5 mm dia galvanized iron wire and G. I. Clamps
For protection of posts
toupees
should be used
from elephants
Posts
Section/
50NB Class ‘B’ pipe-8.5 feet long Hot dip
Corner/End/
galvanized to more than 60 microns. Stay support
Yes/No
Pull through
25-mm. diameters with brackets also hot dip
posts
galvanized. Must include fasteners. Posts must
be grouted 1.5 feet in 2 × 2 × 2 feet size P.C.C.
in 1:2:4 cement sand & stone ballast
Intermediate
More than 60 microns galvanized T’ section post
(Please specify
post
8.5 feet long 25 × 25 × 3 mm., to be inserted
if better technical
1.5 feet in ground
specification
is quoted)
Testers
Digital volt
Must display fence voltage digitally up to
Yes/No.
meter
12 kv only. Made of non-shocking plastic
Xenon flash
Capable of flashing with each pulse to monitor
(Please specify
tube
the fence. Must be visible from a distance
if better technical
of 1000 m.
specification
is quoted)
Neon tester
Neon light measuring the fence for excellent,
very good, good and poor marking
Other General Technical Requirements
The tenderer firm shall have:
1.
ISO 9001 Certification preferably for “design, manufacture, install, maintaining the power
fence for animal control.
2.
Test report from any Govt. test laboratory to confirm the required technical specification of
the energizer.
3.
Test reports from any reputed test laboratory to confirm the required technical
specification of other major components.
(Attach the attested photocopies of all the above documents).
(Sd.)
Chief Executive Officer,
Office of the Divisional Forest Officer,
FDA & Divisional
Mannarkkad.
Forest Officer.
(1)
(2)
(3)
(4)
756
16th OCT. 2018]
STORES PURCHASE
1417
Z¿Lmkv ]ckyw
\º¿ F˛101/2018.
2018 HIvtSm-_¿ 3.
tIcf h\w-˛h-\y-Pohn h-Ip-∏n¬ k¿°m¿ DØ-chv
(-Fw.- F-kv.) \º¿ 26/2017 h\w XobXn 20-˛5-˛2017
{]Imcw cPn-ÿ sNbvXn-´p≈ \ne-hn¬ tbmKy-cmb
‘F, _n, kn’ ¢m v Icm-dp-Im-cn¬ \n∂pw Xmsg
]d-bp∂ {]hrØn-Iƒ sNøp-∂-Xn\v {]tXyIw
ap{Z-sh® Ih-dp-I-fn¬ Z¿Lm-kv £Wn°p-∂p. kmaqly
h\-h¬°-cW hn`mKw Imk-d-tKmUv Unhn-j≥
]cn-[n-bn-ep≈ Imk-d-tKm-Uv, tlmkvZp¿§v kmaqly
h\-h¬°-cWw sdbn-©p-I-fnse \gvk-dn-I-fn¬ 2018-˛19 &
2019-˛20 h¿j-tØ°v aZ¿ s_Uv \gvkdn, IqS-ssX-Iƒ
F∂nh D¬∏m-Zn-∏n®v hnX-cWw sNøp-∂-Xn\v Xm¬]-cy-ap≈
tbmKy-cmb cPn-tÿUv Icm-dp-Im-cn¬ \n∂pw Xmsg-
hnh-cn-°p∂ Xc-Øn¬ ap{Z-h® Z¿Lm-kp-Iƒ £Wn-®p-
sIm-≈p-∂p.
{Ia
Z¿Lmkv \ºcpw
\ncX{Zhyw
\º¿
{]h¿ØnbpsS t]cpw
`
AS-¶¬ XpIbpw
(1)
(2)
(3)
1
24/2018-˛19—tlmkvZp¿§v kmaqly h\
-
h¬°-cWw sdbn-©nse tN‰p-Ip≠v
F∂ ÿeØv 34 FÆw hnhn-[-bn\ w
a Z ¿ s _ U v \ g v k d n FSp-°¬—
` 3,50,000
8,750
2
25/2018-˛19—tlmkvZp¿§v kmaqly h\
-
h¬°-cWw sdbn-©nse tN‰p-Ip≠v
F ∂ ÿ e Ø v 5 0 0 0 0 hnhn-[-bn\w
IqS-ssX- \gvkdn FSp-°¬—` 4,55,000
11,375
3
26/2018-˛19—tlmkvZp¿§v kmaqly h\
-
h¬°-cWw sdbn-©nse amWn-t°mØv
F∂ ÿeØv 34 FÆw hnhn-[-bn\w
aZ¿ s_Uv \gvkdn FSp-°¬—` 3,50,000
8,750
4
27/2018-˛19—tlmkvZp¿§v kmaqly h\
-
h¬°-cWw sdbn-©nse amWn-t°mØv
F∂ ÿ e Ø v 5 0 0 0 0 hnhn-[-bn\w
IqS-ssX- \gvkdn FSp-°¬—` 4,55,000
11,375
5
28/2018-˛19—tlmkvZp¿§v kmaqly h\
-
h¬°-cWw sdbn-©nse CS-bn-e-°mSv
k u Ø v F ∂ ÿ e Ø v 3 4 F Æ w
h n h n - [ - b n\w aZ¿ s_Uv \gvkdn
FSp-°¬—` 3,50,000
8,750
6
29/2018-˛19—tlmkvZp¿§v kmaqly h\
-
h¬°-cWw sdbn-©nse CS-bn-e-°mSv
kuØv F∂ ÿeØv 50000 hnhn-[-
C\w I q S - s s X - \gvkdn FSp-°¬—
` 4,55,000
11,375
7
30/2018-˛19—tlmkvZp¿§v kmaqly h\
-
h¬°-cWw sdbn-©nse CS-bn-e-°mSv
t\ m ¿ Ø v F ∂ ÿeØv 34 FÆw
hn h n - [ - b n \ w a Z¿ s_Uv \gvkdn
FSp-°¬—` 3,50,000
8,750
8
31/2018-˛19—tlmkvZp¿§v kmaqly h\
-
h¬°-cWw sdbn-©nse CS-bn-e-°mSv
t\m¿Øv F∂ ÿeØv 50000 hnhn-[
-C\w IqS-ssX- \gvkdn FSp-°¬—
` 4,55,000
11,375
9
32/2018-˛19—Imk-d-tKmUv kmaqly h\
-
h¬°-cWw sdbn-©nse A W - ¶ q ¿
F ∂ ÿeØv 34 FÆw hnhn-[-bn\w
a Z ¿ s _ U v \ g v k dn FSp-°¬—
` 3,50,000
8,750
10
33/2018-˛19—Imk-d-tKmUv kmaqly h\
-
h¬°-cWw sdbn-©nse AW-¶q¿ F∂
ÿeØv 50000 hnhn-[bn\w IqS-ssX-
\gvkdn FSp-°¬—` 4,55,000
11,375
11
34/2018-˛19—Imk-d-tKmUv kmaqly h\
-
h¬°-cWw sdbn-©nse tIm´q¿ F∂
ÿeØ v 34 FÆw hnhn-[-bn\w a Z ¿
s _ U v \gvkdn FSp-°¬—` 3,50,000
8,750
12
35/2018-˛19—Imk-d-tKmUv kmaqly h\
-
h¬°-cWw sdbn-©nse tIm´q¿ F∂
ÿeØv 50000 hnhn-[-bn\w IqS-ssX-
\gvkdn FSp-°¬—` 4,55,000
11,375
13
36/2018-˛19—Imk-d-tKmUv kmaqly h\
-
h¬°-cWw sdbn-©nse aPo¿∏≈
F∂ ÿeØv 34 FÆw hnhn-[-bn\w
a Z ¿ s _Uv \gvkdn FSp-°¬—
` 3,50,000
8,750
14
37/2018-˛19—Imk-d-tKmUv kmaqly h\
-
h¬°-cWw sdbn-©nse aPo¿∏≈
F∂ ÿeØv 50000 hnhn-[bn\w
I q S - s s X - \ g v k d n F S p-°¬—
` 4,55,000
11,375
ASn-ÿm\
\nc°v—` 15.96.
(aZ¿s_Õn\pw
_mkv°-‰Uv s_Õn\pw Hcpan®v).
Z¿Lmkv t^md-Øns‚ hne— {Ia\º¿ 1, 3, 5, 7,
9, 11, 13 Chbv°v ` 735 + Pn. Fkv. ‰n., a‰p-≈-hbv°v
` 956 + Pn. Fkv. ‰n.
io¿jIw—2406-˛01-˛800-˛55-˛00-˛01˛Extn.Forestry (P).
Z¿Lmkv {]Imcw tcJ-s∏-Sp-Øn-bn-´p≈ Af-hpIfn¬
Bh-iym-\p-k-cWw hyXymkw D≠m-Im-hp-∂-Xm-Wv.
Z¿Lmkv t^md-߃ 25-˛10˛2018, 1 aWnhsc Imk-d-tKmUv
tkmjy¬ t^mdkv{Sn Unhn-j≥ Akn-Â v t^mdÃv
I¨k¿th-‰-dpsS B^o-kn¬ \n∂pw e`n-°p-∂-Xm-Wv.
]qcn-∏n® Z¿Lmkv t^md-߃ At∂Znhkw
3 aWnhsc kzoI-cn-°p-∂Xpw sS≠¿ `mKw˛1, 3.30
aWn°v ÿeØv lmP-cp≈ Z¿Lm-kp-Im-cpsS IqSn
km∂n-≤y-Øn¬
Xpd∂v
]cn-tim-[n-°p-∂Xpw
tbmKy-X-bp-≈h-cpsS am{Xw sS≠¿ `mKw˛2 At∏mƒ
\n›-bn-°p∂ ka-bØv Xpd-°p-∂-Xp-am-Wv. {]kvXpX
Znhkw s]mXp Hgnhv Znh-k-ambn {]Jym-]n-°p∂]£w
(1)
(2)
(3)
757
16th OCT. 2018]
STORES PURCHASE
1418
ASpØ {]hrØn Znhkw \n›nX ka-bØpw ÿeØpw
Z¿Lmkv t^md-߃ bYm-{Iaw e`y-am-°p∂Xpw
kzoI-cn-°p-∂Xpw Xpd∂v ]cn-tim-[n-°p-∂-Xp-am-Wv.
{]kvXpX Znhkw Z¿Lmkv \S-∂n-s√-¶n¬ Sn ÿeØpw
ka-bØpw 26˛10-˛2018 As√-¶n¬ 27˛10-˛2018˛mw
Xob-Xn-bn¬ ]p\¿ Z¿Lmkv \S-Øp-∂-Xm-bn-cn-°pw.
hyh-ÿ-Iƒ
1.
h\w hIp∏v _‘-s∏´ ÿe-ß-fn¬ aZ¿s_-Un¬
apf-∏n®v aXn-bmb hf¿®-bn¬ \n¬°p∂ hr£-ssX-
Iƒ 12 × 18 sk. ao. 50 ssat{Im¨ tKPv D≈ t]mfn-
Øo≥ Ih-dn¬ 3:1:1 F∂ A\p-]m-X-Øn¬ aÆv,
aW¬, NmWIw F∂nh \nd®v ssXIƒ IqS-I-fn¬
\´v, ]cn-]m-en-®v, Pq¨amkw 1˛mw XobXn apX¬
hnX-cWw sNøm≥ ]mI-Øn¬ e`y-am-t°-≠-Xm-Wv.
2.
_mkv°‰v s_Õn-\-\p-tbm-Py-amb ÿe-hpw
\\-bv°p-∂-Xn-\p≈ kwhn-[m-\-ß-fpw a‰v ]cn-]m-e-\-
Øn-\p≈ {Iao-I-c-W-ßfpw Z¿Lm-kp-Im-cs‚
DØ-c-hm-Zn-Xz-Øn¬ h\w-h-Ip-∏p-tZym-K-ÿ-cpsS
A\p-a-Xn-tbmsS \n¿Δ-ln-t°-≠-Xm-Wv.
3.
ssX hnX-cWw 2019 Pq¨ 1 apX¬ Pqsse 31 hsc
BI-bm¬ Pqsse 31 hsc ssXI-fpsS kwc-£Ww
Z¿Lm-kp-Im-c≥ Dd∏v hcp-tØ-≠-Xm-Wv.
4.
Pn. H. (Fw. Fkv.) \º¿ 26/17/F&WLD XobXn
20-˛5-˛2017˛¬ Dƒs°m-≈n-®n-´p≈ F√m hyh-ÿ-Ifpw
Cu Z¿Lm-kn\pw _m[-I-am-Wv.
5.
sS≠¿ ka¿∏n-°p-∂-Xn\p apºm-bn -Z¿Lm-kp-Im-c≥
ssXIƒ
D¬∏m-Zn-∏n-°p∂
ÿew
t\cn´v
]cn-tim-[n®v A\p-tbm-Py-amb \nc°v tcJ-s∏-Sp-tØ-
≠-Xm-Wv. ]n∂oSv GsX-¶nepw Imc-W-Øm¬ \nc°v
Db¿Øp-∂Xv A\p-h-Z-\o-b-a-√.
6.
\nc-X-{Zhyw
H∏n-´n-cn-°p∂
DtZym-K-ÿs‚
t]cn¬ πUvPv sNbvX ^nIvkUv/skIyq-cn‰n
sUt∏m-kn-‰mtbm Z¿Lm-kn-s\m∏w lmP-cm-t°≠-
XmWv.
7.
Fkv. Fkv. sF.
bqWn-‰p-Iƒ
\n-c-X-{Zhyw
\¬tI-≠-Xn-√. AØcw ÿm]-\-߃ AXmXv Pn√m
hyh-kmb tI{μw amt\-P-cpsS CXp kw_-‘n®
tbmKyXm k¿´n-^n-°‰v lmP-cm-t°-≠-Xm-Wv.
8.
hnP-bn-°p∂ Z¿Lm-kp-Im-c≥ \n-c-X-{Zhyw AS°w
samØw AS-¶¬ XpI-bpsS 10% skIyq-cn-‰n-bmbn
HSp°n Z¿Lmkv AwKo-I-cn-°p-∂-Xmbn Adn-bn-°p∂
XobXn
apX¬
7
ZnhkØn\Iw
Icm-dn¬
G¿s∏-tS-≠-Xm-Wv.
9.
Icm¿ {]Im-c-ap≈ tPmen-Iƒ \n›nX Znh-k-
Øn-\Iw Xr]vXn-I-c-ambn ]q¿Øn-bm°n Ign-™m¬
skIyq-cn‰n hnSp-X¬ sNøp-∂-Xn\v Bh-iy-am-b-
SmIvkv ¢nb-d≥kv k¿´n-^n-°-‰p-Iƒ lmP-cm°n
skIyq-cn-‰n aS°n hmtß-≠-Xm-Wv.
10.
tÃm¿ ]¿t®gvkv kw_-‘n®v tIcf k¿°m¿
]pd-s∏-Sp-hn-®n-´p≈ hyh-ÿ-Iƒ ]men-°p-hm≥
Z¿Lm-kp-Im-c≥ _m≤y-ÿ-\m-Wv.
11.
]n.-U-ªyq.-Un., tIcf t^mdÃv tImUv, tIcf tÃm¿
]¿t®gvkv
am\z-h¬
F∂n-h-bn¬
]d-bp∂
hyh-ÿ-Iƒ Cu Z¿Lm-kn\pw _m[-I-am-Wv.
12.
ImemImeß-fn¬ tIcf Kh¨sa‚ v \n›-bn-°p∂
\nIp-Xn-Iƒ Cu {]hrØn°pw _m[-I-am-Wv.
13.
kab_‘n-X-ambn Icm¿ Bcw-`n-°p-∂-Xn\v apºv
Xo¿t°≠ tPmen-bp-s≠-¶n¬ BbXv hIp∏p
Xe-Øn¬ sNbvXv _m°n tPmen-Iƒ am{X-am-bn-cn°pw
Icm¿hyh-ÿ-bn¬ sNtø-≠Xpw XpI \¬tI-≠Xpw.
14.
FÃn-ta‰v
Hmtcm
t]cnepw
ImWn-®n-´p≈
ÿe-ß-fn-ep≈ \gvk-dn-I-fnse aZ¿s_-Õn\pw,
_mkv°-‰Uv s_Õn\pw Hcp-an-®mWv \nc°v tcJ-s∏-
Sp-tØ-≠Xpw {]hrØn Gs‰-Sp-t°-≠-Xpw.
15.
bmsXmcp Imc-Whpw IqSmsX sS≠¿ d±m-°p-∂-
Xn-\p≈ ]q¿Æ-amb A[n-Imcw Akn v
t^mdÃv I¨k¿th-‰¿ (tkmjy¬ t^mdkv{Sn
Unhn-j≥)--˛¬ \n£n-]vX-am-Wv.
IqSp-X¬ hnh-c-߃°v {]hrØ-n Zn-h-k-ß-fn¬
Imk-d-tKmUv
kmaqly
h\-h¬°-cW
hn`mKw
B^o-kntem 04994-˛256910 F∂ t^m¨ \º-cntem
At\z-jn-°m-hp-∂-Xm-Wv.
No. A-101/2018.
3rd October 2018.
Separate sealed tenders are invited from the eligible
A, B, C class contractors registered in the Forest
Department in pursuance of G. O. (Ms) No. 26/2017/
F&WLD dated 20-5-2017 for execution of works noted in
schedule below. The tenderer is bound to comply with
the terms and conditions in force besides the conditions
that will be framed by the Govt. from time to time.
Sealed competitive tenders are invited from authorized
forest contractors for raising Mother Bed Nursery and
basketted bed seedling nursery in Kasaragod, Hosdurg
Social Forestry Ranges in Social Forestry Division,
Kasaragod 2018-19 & 2019-20.
SCHEDULE
Sl.
Tender No., and
EMD
No.
Name of Work with
`
Estimate amount
(1)
(2)
(3)
1
24/2018-19—Estimate for the cost of raising
34 Nos. Mother Bed Nursery of
Miscellaneous Species at Chettukund
under Hosdurg Social Forestry Range
during 2018-19—` 3,50,000
8,750
2
25/2018-19—Estimate for the cost of raising
50000 Misc. Basketted Bed Seedling at
Chettukund of Hosdurg SF Range during
2018-19 & 2019-20—` 4,55,000
11,375
758
16th OCT. 2018]
STORES PURCHASE
1419
3
26/2018-19—Estimate for the cost of raising
34 Nos. Bed Mother Bed Nursery of
Miscellaneous Species at Manikoth
under Hosdurg Social Forestry Range
during 2018-19—` 3,50,000
8,750
4
27/2018-19—Estimate for the cost of raising
50000 Misc. Basketted Bed Seedling at
manikkoth of Hosdurg SF Range during
2018-19 & 2019-20—` 4,55,000
11,375
5
28/2018-19—Estimate for the cost of raising
34 Nos. Bed Mother Bed Nursery of
Miscellaneous Species at Edayilekkad
South under Hosdurg Social Forestry Range
during 2018-19—` 3,50,000
8,750
6
29/2018-19—Estimate for the cost of raising
50000 Misc. Basketted Bed Seedling at
Edayilakkad South of Hosdurg SF Range
during 2018-19 & 2019-20—` 4,55,000 11,375
7
30/2018-19—Estimate for the cost of raising
34 Nos. Bed Mother Bed Nursery of
Miscellaneous Species at Edayilekkad
North under Hosdurg Social Forestry Range
during 2018-19—` 3,50,000
8,750
8
31/2018-19—Estimate for the cost of raising
50000 Misc. Basketted Bed Seedling at
Edayilakkad North of Hosdurg SF Range
during 2018-19 & 2019-20—` 4,55,000 11,375
9
32/2018-19—Estimate for the cost of raising
34 Nos. Bed Mother Bed Nursery of
Miscellaneous Species at Anangoor
under Kasaragod Social Forestry Range
during 2018-19—` 3,50,000
8,750
10
33/2018-19—Estimate for the cost of raising
50000 Misc. Basketted Bed Seedling at
Anangoor of Kasaragod SF Range during
2018-19 & 2019-20—` 4,55,000
11,375
11
34/2018-19—Estimate for the cost of raising
34 Nos. Bed Mother Bed Nursery of
Miscell a n e o u s S p e c i e s at Kottoor
under Kasaragod Social Forestry Range
during 2018-19—` 3,50,000
8,750
12
35/2018-19—Estimate for the cost of raising
50000 Misc. Basketted Bed Seedling at
Kottoor of Kasaragod SF Range during
2018-19 & 2019-20—` 4,55,000
11,375
13
36/2018-19—Estimate for the cost of raising
34 Nos. Bed Mother Bed Nursery of
Miscellaneous Species at Majeerpalla
under Kasaragod Social Forestry Range
during 2018-19—` 3,50,000
8,750
14
37/2018-19—Estimate for the cost of raising
50000 Misc. Basketted Bed Seedling at
Majeerpalla of Kasaragod SF Range during
2018-19 & 2019-20—` 4,55,000
11,375
The quantities of items as per tender may change as
per actual field requirements.
Basic Rate—` 15.96 for each combination Unit.
Cost of tender form—` 735 + 12% G.S.T. for
Sl. Nos. 1, 3, 5, 7, 9, 11, 13 and ` 936 + GST for others.
B. H.––2406-01-800-55-00-01-Extention Forestry (P).
Last date and time of sale of tender forms––
25-10-2018 upto 1 p. m.
Last date and time of receipt of sealed tenders––
25-10-2018 upto 3 p. m.
Date and time of opening of sealed tenders––
25-10-2018 at 3.30 p. m.
Part-I of the sealed tender––3.30 p. m.
Part-II of the sealed tender—will be decided at
venue of part-I of tender opening.
Name of officer from whom tender forms are to be
obtained and to whom sealed tenders are to be
submitted––The Asst. Conservator of Forests, Social
Forestry Division, Kasaragod.
If the date fixed for tender happens to be declared
as holiday, all proceedings will be done on the next
working day with the same time schedule specified
above. If tender cannot be conducted in the above date
tender will be conducted on 26-10-2018 or 27-10-2018
at the place and time with the same conditions.
Conditions
1.
Those seedlings should be transplanted to polythene
cover of size 12 × 18 cm 50 micron supplied by
department via tender filled with top soil, sand &
cowdung in ratio 3:1:1. These seedlings should be
maintained properly to attain minimum, 30cm
height and kept ready for distribution from
1st June.
2.
Distribution of seedling must be carried out from
1st June to 31st July of 2019 and tenderers is
liable for the protection of nursery till the
completion of the seedling distribution.
(1)
(2)
(3)
759
Gaz. No. 41/2018/DTP (Stores Purchase).
(1)
(2)
(3)
16th OCT. 2018]
STORES PURCHASE
1420
3.
All conditions in the G. O. (Ms.) No. 26/2017
F&WLD dated 20-5-2017 will be applicable to
this tender.
4.
Before submitting tender, tenderer should inspect
the area of concerned nursery and quote rate in
the tender form. Any deviation in the rate first
quoted shall not be allowed upon any reason.
5.
EMD
towards
tender
shall
be
remitted
fixed deposit/security deposit duly pledged in the
name of undersigned and same shall be submitted
along with the filled up tender forms.
6.
SSI units are exempted from remitting EMD. Such
units should produce necessary eligibility
certificates obtained from the Manager, District
Industries Centre concerned.
7.
The successful tenderer should remit 10% amount
of the PAC including the EMD as security deposit
for the contract, and enter into an agreement with
the Forest Department within 7 days from the date
of intimation regarding the acceptance of the
tender.
8.
After completing the work satisfactorily, the
security deposit shall be released to the tenderer
on production of necessary tax clearance
certificate.
9.
The tenderer is liable to follow Kerala Store
Purchase Rules.
10.
All conditions stipulated as per PWD, Kerala
Forest Code and Kerala Store Purchase Manual are
applicable for this tender also.
11.
All the taxes prevailing as per government rules for
the time being is applicable in this tender also.
12.
The undersigned reserves the right to cancel the
tender without assigning any reason thereto.
13.
Work for Nursery should be done as a combination
of as mother Bed and Basketted identified with the
same location noted in the estimate and should be
taken as one combination unit and rate should be
quoted for the combination.
14.
Timely operation of nursery which has to
completed before confirmation of tender will be
done by Forest Department and estimate amount
for the same will be deducted.
Further details and clarification can be available
from Social Forestry Division Office, Udayagiri, P. O.
Vidyanagar, Kasaragod and in telephone number
04994-256910 on working days.
Office of the Assistant
(Sd.)
Conservator of Forests,
Asst. Conservator of Forests
Social Forestry Division, (For and on behalf of the
Kasaragod.
Governor of Kerala).
760
Homoeopathy Department
eLp Z¿Lmkv ]ckyw
\º¿ 1235/F2/2018/Pn.-F-®v.-Fw.-kn.-F-®v.
2018 sk]v‰w-_¿ 10.
tImgnt°mSv Kh¨sa‚ v tlmantbm∏XnIv saUn-°¬
tImtfPv Bip-]-{Xn-bnte°m-h-iy-amb k¿Pn-°¬
C\-߃ hnX-cWw sNøp-hm≥ Xøm-dp-≈-h-cn¬ \n∂pw
ko¬ -sh® a¬kc kz`m-h-ap≈ Z¿LmkpIƒ
£Wn®psIm≈p∂p. hnX-cWw sNtø≠ k¿Pn-°-
ep-IfpsS enÃv sS≠¿ t^md-tØm-sSm∏w e`n-°p-∂-Xm-Wv.
AS-¶¬ XpI—` 2,00,000.
Z¿Lm-kpIƒ ka¿∏-n°p∂ Ih-dn\v ]pdØv
“k¿Pn-°-ep-Iƒ hnX-cWw sNøp-∂-Xn-\p≈ Z¿Lmkv”
F∂v tcJ-s∏-SptØ≠Xpw kq{]≠v, Kh¨sa‚ v
tlmantbm∏XnIv saUn-°¬ tImtfPv Bip-]{Xn,
Imc-∏-d-ºv, tImgn-t°m-Sv-˛10 F∂ hnem-k-Øn¬ 30˛10-˛2018-˛\v
]I¬ 11 aWn°v- apºmbn e`n-®n-cn-t°-≠-X-p-am-Wv. -sshIn
e`n-°p-∂h bmsXmcp Imc-W-h-imepw ]cn-K-Wn-°p-∂-X-√.
e`n® Z¿Lm-kpIƒ 30˛10-˛2018, 11.30 aWn°v
Z¿Lm-kpImcp-sStbm Ah¿ Npa-X-e-s∏-Sp-Øp∂-
hcp-sStbm km∂n-≤y-Øn¬ Xpd∂p ]cn-tim-[n-°p-∂Xpw
G‰hpw Ipd™ \nc°pw KpW-ta-∑-bp≈ D¬∏∂w-
tcJs∏-Sp-Ønb-Xp-amb Z¿Lm-kp-Iƒ AwKo-I-cn-°p-
∂-Xp-am-Wv.
Z¿Lm-kns‚ IqsS samØw XpI-bpsS Hcp iX-am\w
hcp∂ XpI-bv°p≈ Unam‚ v {Um^v‰v \nc-X-{Z-hy-ambpw
tIcf k¿°m-cns‚ ` 200˛s‚ ap{Z ]{X-Øn¬ \n›nX
amXr-Ibnep≈ kΩX ]{Xhpw D≈-S°w sNtø-≠-Xm-Wv.
Z¿Lm-kp-Iƒ Bh-iy-ap-≈-h¿ kq{]≠v, Kh¨sa‚ v
tlmantbm∏XnIv saUn-°¬ tImtfPv Bip-]{Xn,
Imc-∏-d-ºv, tImgn-t°m-Sv-˛10 F∂ hnem-k-Øn¬ kz¥w
t]∏-dn¬ At]£n-t°-≠-Xm-Wv. Z¿Lmkv t^mdØns‚
hne ` 472 BWv (\n-Ip-Xn Dƒs∏sS). Cu XpI
bmsXmcp Imc-W-h-imepw Xncn®p\¬Ip-∂-X√. Z¿Lm-kv
t^mdw ssIam‰w sNøp-hm≥ ]mSp-≈-X-√. Z¿Lm-kv
t^mdw X]m-en¬ e`n-°-W-sa-¶n¬ ` 50 X]m¬
Nm¿Pmbpw Abbv-t°-≠-Xm-Wv. Uyqπnt°‰v t^mdw
Bh-iy-ap-≈-h¿ ` 236 IqSp-X-embn Ab-bvt°-≠-Xm-Wv.-
Z¿Lmkv t^mdw 29-˛10˛2018-˛\v ]I¬ 3 aWn-hsc
t\cn´pw 20˛10˛2018-˛\v sshIp-t∂cw 3 aWn-hsc X]m¬
aptJ-\bpw e`n-°p-∂-Xm-Wv. X]m-¬ aptJ\
e`n-°p∂Xn\v aWn- Hm¿U¿ am{Xta kzoI-cn-°p-I-bp-≈q.
hnX-cWw sNøphm≥ Dt±-in-°p∂ k¿Pn°-ep-I-fpsS
hniZ hnh-c-߃ (Afhv, Iº\n apX-em-b-h) Z¿Lm-
kns‚ IqsS AS°w sNtø-≠Xm-Wv. Bip-]{Xn
kq{]-≠ns‚ \n¿t±-im-\p-k-cWw D¬∏-∂߃ hnX-cWw
sNtø-≠-Xm-Wv.
IqSp-X¬ hnh-c-߃°v {]h¿Øn Znh-k-ß-fn¬
Bip-]{Xn Hm^o-kp-ambn _‘-s∏-Smhp-∂-Xm-Wv.
16th OCT. 2018]
STORES PURCHASE
1421
No. 1235/A2/18/GHMCH.
10th September 2018.
Competitive sealed tenders are invited to supply
Various Surgical Items for the use of Government
Homoeo Medical College Hospital, Karaparamba,
Calicut. The list of Surgicial items will be obtained
along with the tender forms.
Estimate Amount—` 2,00,000.
The tenders shall be superscribed as “Tender for
the supply of Surgical Items” and addressed to the
Superintendent, Govt. Homoeo Medical College Hospital,
Karaparamba, Calicut-10. The last date for receipt of
tender is on 30-10-2018 at 11 a. m. Late tenders will
not be considered. Tenders will be opened at 30-10-2018,
11.30 a. m. in the presence of such tenderers or their
authorised representatives who may be present at that time.
Those who want tender forms should apply to the
Superintendent, Govt. Homoeo Medical College Hospital,
Karaparamba, Calicut-10. Application for tender form
should be accompanied by a cash remittance of
` 472 (Including Tax) which is the price fixed
for a form, which is not refundable under any
circumstances. Sale of tender form will be closed at
3 p. m. on 29-10-2018 (20-10-2018 by post).
The tender forms will be obtained from the Hospital
office on direct payment or Money Order only on
working days. Those who want tender forms by post
should send an additional amount of ` 50 towards
postage charge. Duplicate forms, if required will be
issued for ` 236 (Including Tax) per copy.
A Demand Draft for an amount of 1% of the total
cost of items should be enclosed along with the tender as
EMD. Specification also is to be attached with tender.
An agreement in the prescribed form executed and signed
in Kerala Government Stamp paper worth ` 200 should
also be submitted along with tender.
The tender without the required EMD, and agreement
will summarily be rejected. Late tenders will not be
entertained on any account. Any additional information
required can be had from the office of the undersigned
during working hours.
Govt. Homoeopathic Medical
College Hospital,
(Sd.)
Kozhikode.
Superintendent.
]p\¿ eLpZ¿Lmkv ]ckyw
\º¿ 1338/F2/2018/Pn.-F-®v.-Fw.-kn.-F-®v.
2018 HIvtSm-_¿ 5.
tImgnt°mSv Kh¨sa‚ v tlmantbm∏XnIv saUn-°¬
tImtfPv Bip-]-{Xn-bn¬ 1˛11-˛2018 apX¬ 31-˛10-˛2019 hsc-
bp≈ Ime-b-fhnte°m-h-iy-amb sdm´n (sh≈) hnX-cWw
sNøp-hm≥ Xøm-dp-≈-h-cn¬ \n∂pw koep-sh® a¬kc
kz`m-h-ap≈ Z¿LmkpIƒ £Wn®psIm≈p∂p. Z¿Lmkv
kw_-‘n-®p≈ hyh-ÿ-Iƒ, D¬]-∂-Øns‚ Af-hv,
Z¿Lmkv t^mdw F∂nh Bip-]{Xn kq{]-≠ns‚
Hm^o-kn¬ \n∂pw e`y-am-Wv.
Z¿Lm-kpIƒ ka¿∏-n°p∂ Ih-dn\v ]pdØv “1˛11-˛2018
apX¬ 31-˛10-˛2019 hsc-bp≈ Ime-b-fhn¬ sdm´n hnX-cWw
sNøp-∂-Xn-\p≈ Z¿Lmkv” F∂v tcJ-s∏-SptØ≠Xpw
kq{]≠v, Kh¨sa‚ v tlmantbm∏XnIv saUn-°¬
tImtfPv Bip-]{Xn, Imc-∏-d-ºv, tImgn-t°m-Sv-˛10 F∂
hnem-k-Øn¬ e`n-®n-cn-t°-≠-X-p-am-Wv. - Z¿Lm-kpIƒ
29˛10-˛2018˛\v ]I¬ 11 aWnhsc kzoI-cn-°p-∂Xpw
sshIn e`n-°p-∂h \nc-kn-°p-∂-Xp-am-Wv. e`n®
Z¿Lm-kpIƒ At∂-Zn-hkw 12 aWn°v lmP-cp≈
Z¿Lm-kpIƒ ka¿∏n®hcp-sStbm Ah¿ Npa-X-e-s∏-Sp-
Øp∂-h-cp-sStbm km∂n-≤y-Øn¬ Xpd°p-∂XmWv. sdm´n-
bpsS hne Intem \nc-°n¬ tcJ-s∏-Sp-tØ-≠-Xm-Wv.
AS-¶¬ XpI—` 2,00,000.
Z¿Lm-kv t^mdw Bh-iy-ap-≈-h¿ kq{]≠v,
Kh¨sa‚ v tlmantbm∏XnIv saUn-°¬ tImtfPv
Bip-]{Xn, Imc-∏-d-ºv, tImgn-t°m-Sv-˛10 F∂ hnem-k-Øn¬
kz¥w t]∏-dn¬ At]£n-t°-≠-Xm-Wv. Z¿Lmkv
t^mdØns‚ hne ` 472 BWv (\n-Ip-Xn Dƒs∏sS). Cu
XpI bmsXmcp Imc-W-h-imepw Xncn®p\¬Ip-∂-X√.
Z¿Lm-kv t^mdw ssIam‰w sNøp-hm≥ ]mSp-≈-X-√.
Z¿Lm-kv t^mdw 26-˛10-˛2018˛\v sshIp-t∂cw 3 aWn hsc
t\cn´pw 20-˛10-˛2018-˛\v sshIp-t∂cw 3 aWn hsc X]m¬
am¿§hpw F√m {]h¿Øn Znh-k-ß-fnepw e`n-°p-∂-Xm-Wv.
X]m-¬ hgn Bh-iy-ap-≈-h¿ t^md-Øns‚ hne IqSmsX
` 50
X]m¬
Iqenbmbpw
Abbv-t°-≠-Xm-Wv.
XpI t\cnt´m aWn Hm¿U¿ Btbm am{Xta kzoI-cn-°p-
I-bp-≈q.
Uyqπnt°‰v
t^mdw
Bh-iy-ap-≈-h¿
` 236 A[n-Iambn \¬tI≠-Xm-Wv.-
Z¿Lm-kns\m∏w 6 amk-Øn-\p-≈n¬ Xl-io¬Zm-cn¬
\n∂pw e`n® Z¿Lm-kp-Im-cs‚ kmº-ØnItijn
sXfn-bn-°p-∂-Xn-\p≈ tkmƒh≥kn k¿´n-^n-°‰pw
` 2,000˛s‚ Unam‚ v {Um^v‰v (kq{]≠v, Kh¨sa‚ v
tlmantbm∏XnIv saUn-°¬ tImtfPv Bip-]{Xn,
tImgn-t°m-Sv F∂ t]cn-ep-≈Xv) \nc-X-{Z-hy-ambpw tIcf
k¿°m-cns‚
` 200˛s‚ ap{Z]{X-Øn¬ \n›nX
amXr-Ibnep≈ kΩX]{Xhpw lmP-cm-t°-≠-Xm-Wv.
ta¬∏-d-™h D≈-S°w sNømØh \nc-kn-°p-∂-Xm-Wv.
IqSp-X¬ hnh-c-߃°v Bip-]{Xn Hm^o-kp-ambn
_‘-s∏-Smhp-∂-Xm-Wv.
761
16th OCT. 2018]
STORES PURCHASE
1422
No. 1338/A2/18/GHMCH.
5th October 2018.
Competitive sealed tenders are invited for the supply
of bread (white) for the period from 1-11-2018 to
31-10-2019 to the Government Homoeo Medical College
Hospital, Karaparamba, Calicut. Tender forms can be
obtained from the office of the undersigned on request.
Estimate Amount—` 2,00,000.
The tender should be superscribed “Tender for
the supply of bread from 1-11-2018 to 31-10-2019” and
should
be
addressed
to
the
Superintendent,
Govt. Homoeo Medical College Hospital, Karaparamba,
Calicut-10. Last date for receipt of tender is on
29-10-2018 at 11 a.m. Late tenders will not be
considered. Tenders will be opened at 12 Noon
on the same day in the presence of tenderers or their
authorised representatives who may be present at that time.
Those who require tender forms should apply to the
Superintendent, Govt. Homoeo Medical College Hospital,
Karaparamba, Calicut-10. Application for tender form
should be accompanied by a cash remittance of
` 472 (inclusive of ST) which is not refundable on any
account. Sale of tender form will be closed at
3 p. m. on 26-10-2018 (20-10-2018 by post). Those
who want to obtain the tender forms by post should send
an additional amount of ` 50 towards the postage
charges. Duplicate forms, if required will be issued at
` 236 per copy.
Each tender should be accompanied by an original
solvency certificate issued from Tahsildar during the last
6 months with an attested copy (Original will be
returned). A Demand Draft for an amount of ` 2,000
should be attached with the tender forms as EMD drawn
in favour of the Superintendent, Govt. Homoeo Medical
College Hospital, Calicut-10. An agreement in the
prescribed form executed and signed in Kerala
Government Stamp Paper worth ` 200 should also be
submitted along with tender.
The tender without the required EMD, agreement and
Solvency Certificate will summarily be rejected.
Any additional information required can be had from
the office of the undersigned during the working hours.
Govt. Homoeo Medical
College Hospital,
(Sd.)
Kozhikode.
Superintendent.
Irrigation Department
E-TENDER NOTICE
No. CE(MECH)/T/5/2018-19.
8th October 2018.
The Superintending Engineer & Deputy Chief
Engineer, (Mechanical), PWD, Irrigation Department,
Thiruvananthapuram for and on behalf of the Governor of
Kerala invites e-tender in single bid system in
prescribed form from the PWD registered lift
companies-Group B/ Group A for the “Construction of
Capsule type Lift in the Nila Block of MLA Hostel”.
In accordance with respective specification for the
work as shown in tender schedule of this tender
document, the tender is to be submitted as
e-tenders through http://etenders.kerala.gov.in. Since this
is an e-tender, only those bidders who have enrolled in
the above portal with their own Digital Signature
Certificate (DSC) can participate in the tender. e-tender
document and other details can be obtained from the
above portal.
Cost of tender documents—` 2,500 + 18% GST
(Total ` 3,000).
Document sale starting date and time—9-10-2018 at
10 a. m.
EMD (Online payment)—` 50,000.
Date and time of commencement of online bid
submission—9-10-2018 at 11 a. m.
Date and time of closing of online bid submission—
23-10-2018 at 5 p. m.
Date and time of opening of bid—26-10-2018
at 2.30 p. m.
Bidders shall remit the tender document
fee and EMD using the online payment option of
e-procurement system only. Bidders are advised to
visit downloads section of e-procurement website
http://etenders.kerala.gov.in for detailed instructions on
making online payment using internet banking facility of
SBI or by NEFT facility. In the bid, the following
documents should be submitted by online.
1.
BOQ duly filled up and signed.
2.
Copy of PWD Regn. Certificate with validity and
class of registration attested by Gazetted Officer.
3.
Technical bid details duly filled up and signed.
(a) Technical data sheet duly filled up and signed.
(b) Drawings and specifications of the lifts.
(c) If additional technical information has to be
furnished, separate data sheet shall be
attached.
762
16th OCT. 2018]
STORES PURCHASE
1423
4.
Undertaking by the contractor for 3 years warranty
and 5 years comprehensive compulsory AMC.
5.
GST certificate.
6.
E-payment form duly filled and signed.
7.
Proof certificate describing the make of the
product.
8.
Scanned copy of preliminary agreement executed
in Kerala Stamp Paper worth ` 200.
9.
EMD exemption certificate (if any) should
be submitted online.
10.
Other details if any required to be furnished in this
special condition.
11.
Form No. 83 & 84 duly filled and signed.
12.
All tender documents duly signed.
Hard copy of all the above documents should be
submitted on or within 3 days after bid opening.
The bidders shall submit the hard copy of the bid
containing the documents as noted in the above paras in
sealed envelope. The sealed envelope addressed to the
Superintending Engineer & Deputy Chief Engineer, PWD
(Mechanical), Thiruvananthapuram should reach in this
office on or within 3 days after bid opening. The
envelope should be superscribed with Tender No. due date
and name of work.
Tenders will be opened online in the presence of
such bidders or their authorized representatives present at
the prescribed time of opening before the Superintending
Engineer & Deputy Chief Engineer, PWD (Mechanical),
Thiruvananthapuram. If date fixed for opening happens to
be a holiday or due to Net failure the tender will be
opened in the next working day at same time and place.
The right to accept or reject of e-tender without
assigning any reason is vested with the Superintending
Engineer & Deputy Chief Engineer, (Mechanical), PWD,
Thiruvananthapuram.The bidder is advised to submit the
bids well before the stipulated date and time to avoid any
kind of Net work issues. In this regard, the department
shall not be responsible for any kind of such issues
faced by the bidder. All the rules related to tender in
Irrigation Department along with the rules and regulation
prescribed for e-tenders by the Government of Kerala
shall be applicable to this tender.
(Sd.)
Superintending Engineer
Office of the Chief Engineer,
and Deputy Chief
Mechanical,
Engineer, Mechanical,
Thiruvananthapuram.
PWD.
Medical Education Department
Z¿Lmkv ]ckyw
\º¿ Fkv2/3981/2018/Un.-kn.kn.
2018 sk]v‰w-_¿ 13.
tImgn-t°mSv Kh. -Z-¥¬ tImtfPnte°v Xmsg-
Im-Wn-®n-cn-°p∂ sU‚¬ sa‰o-cn-b¬kv hnhn[ hIp-∏p-I-
fn-tebv°v -hnX-cWw sNøp-∂-Xn-\v ap{Z-h® Z¿Lm-kp-Iƒ
£Wn-®p-sIm-≈p-∂p.
Z¿Lmkv \º¿—Fkv2/3981/18/Un.-kn.-kn. apX¬
Fkv2/3990/18/Un.-kn.-kn. hsc.
tase-gpØv—Z¥¬ sa‰o-cn-b¬kv.
Z¿Lmkv X]m¬ hgn hn¬∏\ Ah-km\n°p∂
Xob-Xnbpw ka-bhpw—24˛10˛2018, 3 aWn.
Z¿Lmkv hn¬∏\ Ah-km\n°p∂ Xob-Xnbpw
ka-bhpw—31˛10˛2018, 3 aWn.
Z¿Lm-kv
e`n-t°≠
Ah-km\
Xob-Xnbpw
ka-bhpw—1˛11˛2018, 4 aWn.
Z¿Lmkv Xpd-°p∂ Xob-Xnbpw ka-bhpw—2˛11-˛2018,
11 aWn.
Z¿Lmkv t^mdØns‚ hne :
Hdn-Pn-\¬—` 1,500 + G. S. T.
Uyqπn-t°‰v—` 750 + G. S. T.
X]m¬hgn (Fw. H. am{Xw)—` 1,550 + G. S. T.
GI-tZi AS-¶¬ XpI—` 50,00,000.
\nc-X-{Zhyw—1 % (an\naw ` 1,500).
No. S2-3981/2018/DCC.
13th September 2018.
Sealed and competitive tenders in the prescribed
form are invited for the supply of the following Dental
materials to the DCC.
Tender No.—S2-3981/2018/DCC to S2-39902018/
DCC.
Superscription—Dental Materials.
Closing date of sale of tender form by post—
24-10-2018, 3 p. m.
Closing
date
of
sale
of
tender
form—
31-10-2018, 3 p. m.
Last date and time of receipt of tender—
1-11-2018, 4 p. m.
Date
and
time
of
opening
of
tender—
2-11-2018, 11 a. m.
Cost of tender forms :
Original—` 1,500 + G. S. T.
Duplicate—` 750 + G. S. T.
By post (M. O. only)—` 1,550 + G. S. T.
PAC—` 50,00,000.
EMD—1% (Minimum ` 1,500).
Govt. Dental College,
(Sd.)
Kozhikode.
Principal.
763
Gaz. No. 41/2018/DTP (Stores Purchase).
16th OCT. 2018]
STORES PURCHASE
1424
Police Department
TENDER NOTICE
No. C1/9787/2018/FSL.
25th September 2018.
Sealed tenders are invited for the Purchase of
Products of Qiagen for Forensic Science Laboratory,
Thiruvananthapuram, so as to reach Forensic Science
Laboratory, Thiruvananthapuram on or before 12 Noon on
25-10-2018. Tender is invited under single bid system.
Tender No.—22/2018-2019
List of Items
Name of Items
Specification
Quantity
required
Products of Qiagen
Investigater 24 plex QS
Qiagen
1
Kit (100)
Cat. No. 382415
Qiagen QIAmp DNA
Qiagen
2
Mini Kit (250)
Cat. No. 51306
Qiagen QIAmp DNA
Qiagen
2
Blood Mini Kit (250)
Cat. No. 51106
Investigater Argus × 12
Qiagen
1
Kit (100)
Cat. No. 383225
Approximate Cost—` 4,90,000.
E. M. D.—` 4,900.
Cost of tender form—` 1,500.
Date and time of opening of tender—25-10-2018,
4 p. m.
Conditions
1. The Tenders should be superscribed with Tender
Number and details of the items and addressed to
the Director, Forensic Science Laboratory,
Thiruvananthapuram, Kerala- 695 010 (Tel.
No. 0471- 2722155). Late tenders will not be
accepted. The tenders will be opened at the time
mentioned above, in the presence of the tenderer
or their authorized representatives (with proof of
identity) who may be present at that time. The sale
of tender form will be closed at 4 p. m. on
24-10-2018.
2. The tenders should be submitted in sealed
envelope clearly superscribed with Tender No. and
name of item. The rate is to be quoted in Indian
Money. No advance payment can be made for
procuring any of the above items.
3. Opening of tenders—The offers received with
requisite EMD or Bid security with samples will
be opened on 25-10-2018 at 4 p. m. in the
presence of the representatives of the firms who
may be present at that time. All tenders received
without EMD will be rejected outright. The bids
will be evaluated by a Committee and those that
do not conform to the specifications will be
rejected. All prices quoted should be inclusive of
all levies and taxes. Customs duty if any should be
mentioned specifically.
4. Intending tenderer may, on application to the
Director, Forensic Science Laboratory, Kerala
obtain requisite tender forms on which the tenders
should be submitted or download the tender
forms
from
the
Kerala
Police
website
www.keralapolice.gov.in. The tenderer who
download forms should submit the required tender
value as a Demand Draft along with the tender.
5. Earnest Money Deposit (EMD) should be
furnished along with the Tender. EMD may be
submitted either in crossed Bank Drafts/Treasury
Savings Bank Deposits/Government Promissory
notes/Bank Guarantee or National Saving
Certificates drawn in favour of Director, Forensic
Science
Laboratory,
Thiruvananthapuram,
Kerala-695 010. The name of the firm and tender
number should be mentioned in the reverse side of
the EMD and tender cost. Firms which are
exempted from furnishing EMD should produce a
copy of relevant authorized document for
verification. Without EMD, the tenders will be
rejected.
6. Preference will be given to the products submitted
by the manufacturer or their authorized dealers
having authorization from the original equipment
manufacturer. Similarly preference will be given to
the tenderer having experience of supplying
similar/same items to Govt. Departments or
Organizations, for which the tenderer has to
produce proof of purchase/installation/satisfaction
of the customer.
7. Police Department is not liable to send any
individual communication. Any clarification/
doubts regarding the specification or related
matters pertaining to the items tendered may be
got cleared through Manager FSL, Cl Section
(Phone-0471-2722155) or Director, FSL (0471-
2721533).
8. The Director, Forensic Science Laboratory is
empowered to reject any tender without assigning
any reason.
Forensic Science
Laboratory,
LATHA DEVI, M. A.,
Thiruvananthapuram.
Director.
764
16th OCT. 2018]
STORES PURCHASE
1425
Printing Department
E-TENDER NOTICE
No. 52/2018-19.
29th September 2018.
The Director of Printing, Government Central Press,
Thiruvananthapuram-695 001 (0471-2331458) invites on
behalf of Printing Department for the Purchase of
CTP Plates.
For more details please see the Kerala Government
E-procurement web portal.
List of Items
Sl.
Name of Items
Quantity
No.
1
770 × 927 × 0.28mm (viostar, violet)
6000 Nos.
2
608 × 914 × 0.28mm (viostar, violet)
4000 Nos.
3
608 × 914 × 0.28mm (Thermal)
500 Nos.
4
527 × 641 × 0.28mm (Thermal)
500 Nos.
Total Estimate Cost—` 30,10,000.
Cost of tender form—` 4,600 + G. S. T. @ 18%.
E. M. D @ 1% estimated cost—` 30,100.
Last date and time of application—20-10-2018,
5 p. m.
Date and time of opening —23-10-2018, 11 a. m.
General Conditions
1.
Bidder shall be made the EMD/Bid Security as
per G. O. (P) No. 448/05/Fin. dated 13-10-2005.
If availing EMD exemption should produced
documentary evidence for the same.
2.
Rate quoted should have inclusive of all taxes
and other charges including loading, transportation,
unloading
charges
for Department
Store,
Government Central Press, Thiruvananthapuram.
3.
Sample should be produced on or before the last
date of E-tender to the office of Director of
Printing.
4.
The supplier should be the authorised dealer of
the item.
5.
Payment will be made only after satisfacory
receipt and supply of items.
6.
The item should be supplied as when required
within 7 days with effect from the date of receipt
of the Supply Order.
7.
An agreement in Kerala Stamp Paper worth
` 200 should be executed along with the tender.
8.
The tenderer should produce documentary
evidence in proof of the following:—
(a) A Short list of the previous major supplies
(2 years)
(b) Peformance Certificate from reputed
customers.
9.
All conditions laid down in KFC Form 14 should
be completed in the agreement.
10.
The purchaser has the right to cancel the supply
order at any time without assigning.
11.
The rate quoted should be remain the same up to
31-3-2019.
Office of the Director of Printing,
Government Central Press,
(Sd.)
Thiruvananthapuram.
Director of Printing.
Z¿Lmkv ]ckyw
(1)
\º¿ 53/2018˛19.
2018 HIvtSm-_¿ 3.
k¿°m¿ A®pI-q-S-ßfnte°v t_mIvkvkv{Sm∏v 9 mm
(150 Roll) hnX-cWw sNøp-∂-Xn\v ap{Z-h® Z¿Lm-kp-Iƒ
£Wn®psIm≈p-∂p. Z¿Lm-kpIƒ 17-˛10˛2018 hsc
kzoI-cn-°p-∂Xpw At∂Znhkw 3 aWn°v Z¿Lm-kp-
Im-cpsStbm Ah¿ Npa-X-e-s∏-Sp-Ønb GP‚p-am-cp-sStbm
km∂n-≤y-Øn¬ Xpd-°p-∂-Xp-am-Wv. Z¿Lmkv Ab-bv°p∂
Ih-dn\p apI-fn¬ “Z¿Lmkv \º¿ 53/2018˛19
t_mIvkvkv{Sm∏v 9 mm hnX-cWw kw_-‘n®v ” F∂v
D]-te-J\w sNbvXncn-°-Ww. Xma-kn®p In´p∂
Z¿Lm-kp-Iƒ bmsXmcp Imc-W-h-imepw kzoI-cn-°p-∂-X-√.
AS-¶¬ XpI—` 1,05,000.
Z¿Lm-kp-Iƒ \n¿±n-jvS- t^m-d-Øn¬ kmºnƒ
klnXw ka¿∏n-t°-≠-Xm-Wv. Z¿Lmkv t^m-d-߃
` 400 + G. S. T. 18% \nc-°nepw Uyqπnt°‰v ` 200 +
G. S. T. 18% \nc-°nepw Xncp-h-\-¥-]pcw Kh¨sa‚ v
sk≥{S¬ {] n¬ \n∂pw t\cn´v hmßm-hp-∂-Xm-Wv.
Z¿Lmkv t^md-Øns‚ hnebmbn sN°v, Unam‚ v
{Um^v‰v, t]mì Hm¿U¿, X]m¬ Ãmºv F∂nh kzoI-
cn-°p-Itbm t^m-dw hn.-]n.-]n. Bbn Ab-bv°p-Itbm sNøp-
∂-X-√. F∂m¬ aWn-tbm¿U¿ apJm-¥ncw t]mÃv sNe-hn-
\p≈ ` 32 klnXw Ab-bv°p-I-bm-sW-¶n¬ Z¿-Lmkv
t^md-w cPntÿUv X]m-en¬ Ab-®p-sIm-Sp-°p-∂-Xm-Wv.
Z¿-Lmkv
t^md߃
ssIam‰w
sNøp-hm≥
]mSn-√m-Ø-Xm-Wv. ` 200 hne-bp≈ tIcf k¿°m¿
ap{Z∏{X-Øn¬ F{Kn-sa‚pw samØw XpI-bpsS 1 %
\n-c-X-{Z-hyhpw Z¿Lm-kn-t\m-sSm∏w ka¿∏n-t°-≠-Xm-Wv.
A√m-Øh bmsXmcp Imc-W-h-imepw kzoI-cn-°p-∂-X-√.
765
16th OCT. 2018]
STORES PURCHASE
1426
No. 53/2018-19.
3rd October 2018.
Sealed tenders superscribed as Tender No. 53/2018-19
for the supply of BOX STRAP 9mm (150 Roll) is
invited by the undersigned. The tenders along with
samples should reach this office on or before
17-10-2018 at 1 p. m. and the same will be opened at
3 p. m. on the same day in the presence of tenderers or
their authorized representatives who may be present at
that time. Tenders shall be submitted in the prescribed
form which can be had from the office of the
undersigned on cash payment of ` 400 + GST @ 18%
for original form and ` 200 + GST @ 18% for
duplicate. Cheques, Demand Draft, Postage Stamps,
Postal Orders etc., will not be accepted towards the cost
of forms, nor will the forms be sent by V. P. P.
The tender forms are not transferable. Sale of tender
forms will be closed at 12 Noon on 17-10-2018.
An agreement in Kerala Stamp Paper worth ` 200 should
be executed along with the tenders. Late tenders and
tenders not accompanied by Earnest Money Deposit @
1% of total cost and preliminary agreement in Kerala
Stamp Paper worth ` 200 will not be accepted on any
account.
PAC—` 1,05,000.
EMD—` 1% of the Amount of tender.
Name and designation of the officer to whom the
tenders are to be submitted—Superintendent of
Government Presses, Thiruvananthapuram.
Name of
Office—Directorate
of
Printing,
Government Central Press, Thiruvananthapuram-1.
GENERAL CONDITIONS
1. The rate quoted should be inclusive of all taxes,
transportation, loading and unloading expenses f.o.r.
Government Central Press, Thiruvananthapuram-
695 001.
2. Samples should be supplied.
3. The item should be supplied within 7 days on the
receipt of conformation.
4. The payment will be made only after satisfactory
receipt and survey reports.
5. Bank details should be furnished in the Bill.
6. The rates should be valid upto 31-3-2019.
7. The Purchaser has the right to cancel the supply
order at any time without assigning any reason.
(2)
\º¿ 51/2018˛19.
2018 HIvtSm-_¿ 5.
k¿°m¿ A®p°-q-S-ßfnte°v _\n-b≥ thÃv
(500 kg) & tIm´¨ thÃv (500 kg) F∂nh hnX-cWw
sNøp-∂-Xn\v ap{Z-h® Z¿Lm-kp-Iƒ £Wn®psIm≈p-∂p.
Z¿Lm-kpIƒ 17-˛10˛2018, 1 aWn-hsc kzoI-cn-
°p-∂Xpw At∂Znhkw 3 aWn°v Z¿Lm-kp-Im-cpsStbm
Ah¿
Npa-X-e-s∏-Sp-Ønb
GP‚p-am-cp-sStbm
km∂n-≤y-Øn¬ Xpd-°p-∂-Xp-am-Wv. Z¿Lmkv Ab-bv°p∂
Ih-dn\p apI-fn¬ “Z¿Lmkv \º¿ 51/2018˛19 _\n-b≥
thÃv & tIm´¨ thÃv hnX-cWw kw_-‘n®v ”F∂v
D]-te-J\w sNbvXncn-°-Ww. Xma-kn®p In´p∂
Z¿Lm-kp-Iƒ bmsXmcp Imc-W-h-imepw kzoI-cn-°p-∂-X-√.
AS-¶¬ XpI—` 1,40,000.
Z¿Lm-kp-Iƒ \n¿±n-jvS- t^m-d-Øn¬ kmºnƒ
klnXw ka¿∏n-t°-≠-Xm-Wv. Z¿Lmkv t^m-d-߃
` 400 + G.S.T. 18% \nc-°nepw Uyqπnt°‰v ` 200 + G.S.T. 18%
\nc-°nepw Xncp-h-\-¥-]pcw Kh¨sa‚ v sk≥{S¬ {] n¬
\n∂pw t\cn´v hmßm-hp-∂-Xm-Wv. Z¿Lmkv t^md-Øns‚
hnebmbn sN°v, Unam‚ v {Um^v‰v, t]mì Hm¿U¿,
X]m¬ Ãmºv F∂nh kzoI-cn-°p-Itbm t^m-dw hn.-]n.-]n.
Bbn Ab-bv°p-Itbm sNøp-∂-X-√. Z¿-Lmkv t^md߃
ssIam‰w sNøp-hm≥ ]mSn-√m-Ø-Xm-Wv. ` 200 hne-bp≈
tIcf k¿°m¿ ap{Z∏{X-Øn¬ F{Kn-sa‚pw samØw XpI-
bpsS 1 % \n-c-X-{Z-hyhpw Z¿Lm-kn-t\m-sSm∏w ka¿∏n-t°-
≠-Xm-Wv. A√m-Øh bmsXmcp Imc-W-h-imepw kzoI-cn-°p-
∂-X-√.
No. 51/2018-19.
5th October 2018.
Sealed tenders superscribed as Tender No. 51/2018-19
for the supply of Banyan waste (500 kg) & Cotton waste
(500 kg) invited by the undersigned. The tenders along
with samples should reach this office on or before
17-10-2018 at 1 p. m. and the same will be opened at
3 p. m. on the same day in the presence of tenderers or
their authorized representatives who may be present at
that time. Tenders shall be submitted in the prescribed
form which can be had from the office of the
undersigned on cash payment of ` 400 + G.S.T. @ 18%
for original form and ` 200 + G.S.T. @ 18% for
duplicate. Cheques, Demand Draft, Postage Stamps,
Postal Orders etc., will not be accepted towards the cost
of forms, nor will the forms be sent by V. P. P. The
tender forms are not transferable. Sale of tender forms
will be closed at 12 Noon on 17-10-2018. An agreement
in Kerala Stamp Paper worth ` 200 should be executed
along with the tenders. Late tenders and tenders not
accompanied by Earnest Money Deposit @ 1% of total
cost and preliminary agreement in Kerala Stamp Paper
worth ` 200 will not be accepted on any account.
PAC—` 1,40,000.
Name and designation of the officer to whom the
tenders are to be submitted—Superintendent of
Government Presses, Thiruvananthapuram.
GENERAL CONDITIONS
1. The rate quoted should be inclusive of all taxes,
transportation, loading and unloading expenses f.o.r.
Government Central Press, Thiruvananthapuram-
695 001.
2. Samples should be supply of if necessary.
3. The item should be supplied within 7 days on the
receipt of confirmation.
766
16th OCT. 2018]
STORES PURCHASE
1427
4. The payment will be made only after satisfactory
receipt and survey reports.
5. Bank details should be furnished in the Bill.
6. The rates should be valid upto 31-3-2019.
7. The purchaser has the right to cancel the supply
order at any time without assigning any reason.
Office of the Director of Printing,
(Sd.)
Government Central Press,
For Superintendent of
Thiruvananthapuram.
Govt. Presses.
Technical Education Department
eLp Z¿Lmkv ]ckyw
\º¿ ]n5/7042/17/kn.-C.-‰n.
2018 sk]v‰w-_¿ 25.
Xncp-h-\-¥-]pcw F©n-\o-b-dnwKv tImtf-Pn¬
km‰vsse‰v t{]mP-IvSn-\m-h-iy-amb PC Based Vibration
Controller and Analyser hnX-cWw sNøm≥ Xm¬∏-cy-ap≈
ÿm]-\-ß-fn¬ \n∂pw Z¿Lm-kp-Iƒ £Wn-®p-
sIm-≈p-∂p.
Z¿Lmkv \º¿—29/18/]n5/CET-SAT
www.etenders.kerala.gov.in F∂ ssk‰nse \º¿—
2018_DTE_234595_1.
C\w—PC Based Vibration Controller and Analyser
AS-¶¬ XpI—` 13,00,000.
\nc-X-{Zhyw—` 13,000.
Z¿LmkpI-fpsS hne—` 2,360 (` 2,000 + 18% GST)
www.etenders.kerala.gov.in F∂ ssk‰v aptJ\
ka¿∏n-t°≠ Ah-km\ Xob-Xnbpw ka-bhpw—
5˛11-˛2018, 3 aWn-.
Z¿Lmkv Xpd°p∂ Ah-km\ Xob-Xnbpw
ka-bhpw—9-˛11-˛2018, 11 aWn.
Z¿Lmkv hnebpw \nc-X-{Z-hyhpw Hm¨sse-\mbn
AS-bvt°-≠-Xm-Wv. Z¿Lmkv {]am-W-tØm-sSm∏w
` 200-˛s‚ hne-bp≈ tIcf ap{X-]-{X-Øn¬ {]mY-anI
I-cm¿ ]{Xhpw A]vtemUv sNtø-≠-Xm-Wv. Z¿Lmkv
Xpd-°p∂ Xob-Xn- ap-X¬ Bdv amkw-hsc hne \nc-°n\v
{]m_eyw D≠m-bn-cn-t°-≠-Xm-Wv.
(IqSp-X¬ hnh-c-߃ www.cet.ac.in/www.etenders.
kerala.gov.in˛¬ e`y-am-Wv.)
No. P5/7042/17/CET.
25th September 2018.
Tenders are invited for PC Based Vibration
Controller
and
Analyser
for
CET
Satellite
Project of the College of Engineering Trivandrum,
Thiruvananthapuram.
Tender No.—29/18/P5/CET-SAT
ID in www.etenders.kerala.gov.in:2018_DTE_
234595_1.
Item—PC based Vibration controller and
analyser for CET Satellite Project.
Estimate Cost—` 13,00,000.
EMD—` 13,000.
Cost of tender form—` 2,360 (` 2,000 + 18% GST).
Last date and time for uploading the documents in
the website www.etenders.kerala.gov.in—5-11-2018, 3 p. m.
Date and time of opening of tender—9-11-2018,
11 a. m.
The tender cost and EMD will be remitted through
e-payment facility provided by the e-Procurement system.
An agreement in Kerala Stamp Paper value of ` 200
must be executed and signed and scanned copy must be
uploaded along with other tender documents.
(For more details visit www.cet.ac.in/www.etenders.
kerala.gov.in).
College of Engineering Trivandrum,
(Sd.)
Thiruvananthapuram.
Principal.
eLp Z¿Lmkv Zo¿Ln-∏n-°¬ ]ckyw
\º¿ Un3-˛2781/2018/RIT.
2018 sk]v‰w-_¿ 10.
tIm´bw
cmPo-hvKm‘n
C≥Ãn-‰yq´v
Hm^v
sSIvt\m-f-Pn-bnse Iºyq-´¿ kb≥kv & F©n-\o-b-dnwKv
Un∏m¿´p-sa‚n-te°v Iºyq-´¿ tÃj-\dn \¬Ip-∂-Xn\v
Xm¬∏cy-ap≈ Icm-dp-Im-cn¬\n∂pw ap{Z-h® Ih-dp-I-fn¬
a’-c-kz-`m-h-ap≈ Z¿LmkpIƒ £Wn®psIm-≈p-∂p.
AS¶¬ XpI—` 2,39,650.
Z¿Lmkv t^mdØns‚ hne (\nIp-Xn-b-S°w) :
A ¬—` 560.
]I¿∏v—` 336.
Z¿Lmkv t^mdw hn¬°p∂ Ah-km\ XobXnbpw
ka-bhpw—30-˛10-˛2018, 2 aWn.
]qcn-∏n® Z¿Lmkv kzoI-cn-°p∂ Ah-km\
Xob-Xnbpw ka-bhpw—31-˛10-˛2018, 1 aWn.
Z¿Lmkv Xpd∂p ]cn-tim-[n-°p∂ Xob-Xnbpw
ka-bhpw—31-˛10-˛2018, 2 aWn.
Z¿Lmkv t^mdw X]m¬ aptJ\ Bh-iy-ap-≈-h¿
` 35 A[nIambn Hmtcm Z¿Lmkv t^md-Øn-s‚bpw
hne-tbm-sSm∏w aWn-tbm¿-U¿ Bbn Ab-bvt°-≠-Xm-Wv.
Z¿Lm-kp-Iƒ kzoI-cn-°p∂ Ah-km\ XobXn
20-˛10˛2018 Bbn-cn-°pw. apI-fn¬ ]d-™n-cn-°p∂ sS≠¿
t^mans‚ hne F√m \nIp-Xnbpw Dƒs∏-sS-bm-Wv.
Z¿Lmkv t^md-߃ {]n≥kn∏mƒ, cmPo-hvKm‘n
C≥Ãn-‰yq´v Hm^v sSIvt\m-f-Pn, sh≈q¿ ]n. H.,
]mºm-Sn, tIm´-bw-˛686 501 F∂ hnem-k-Øn¬ t\cnt´m
aWn-tbm¿-U¿ aptJ-\tbm F√m {]hrØn Znh-k-ß-fnepw
cmhnse 10 aWn apX¬ sshIp-t∂cw 3 aWn-hsc
e`n-°p-∂-Xm-Wv.
767
Gaz. No. 41/2018/DTP (Stores Purchase).
16th OCT. 2018]
STORES PURCHASE
1428
Z¿Lmkv ka¿∏n°p∂ Ihdn\pap-I-fn¬ Z¿Lmkv
\ºcpw XobXnbpw tcJ-s∏-SptØ≠XmWv. Z¿Lmkv
t^md-߃ bmsXmcp Imc-W-h-imepw ssIam‰w
sNøp-hm≥ ]mSp-≈-X-√. sN°v, {Um^v‰v, t]mì
Hm¿U¿, X]m¬ Ãmºv apX-em-bh kzoI-cn-°p-∂-X-√.
Z¿Lmkv \nbaw A\p-k-cn®v Z¿Lmkv ka¿∏n-°p∂
Bƒ Z¿Lm-kn-s\m∏w ` 200 hnebp≈ tIcf
ap{Z]{XØn¬ kΩ-X-]-{Xhpw samØw XpIbpsS
Hcp iX-am\w (1%) \ncX{Zhyhpw ka¿∏nt°
≠XmWv. Ch C√mØ Z¿Lm-kp-Iƒ \ncp-]m-[nIw
\nckn°s∏Sp∂XmWv. D]-I-c-W-ß-fpsS hni-Z-hn-h-c-߃
Z¿Lmkv t^md-Øn-s\m∏w e`n-°p-∂-Xm-Wv.
No. D3-2781/2018/RIT.
10th September 2018.
Extended Sealed tenders are invited for the supply of
Computer stationery items for the use of CSE Department
of this Institution at a total cost of ` 2,39,650.
Cost of tender form (Including Taxes):
Original—` 560.
Duplicate—` 336.
Last date and time of sale of tender form—
30-10-2018, 2 p. m.
Last date and time for receipt of tender—
31-10-2018, 1 p. m.
Date and time of opening of tender—31-10-2018,
2 p. m.
Those who want tender forms by registered post
should send ` 35 extra for each tender besides the cost of
tender forms by Money Order to the undersigned which
should be received on or before 20-10-2018.
Tender forms can be had from the Office of the
Principal, Rajiv Gandhi Institute of Technology, Velloor P. O.,
Pampady, Kottayam-686 501 on a cash remittance as
above or by Money Order on all working days between
10 a. m. to 3 p. m. The tender should be superscribed as
Tender No. and date. Cheques, Postage Stamps, Drafts,
Postal Orders etc. will not be accepted towards the cost
of tender forms. The tender forms are not transferable.
As per the tender condition the tenderer should send
along with this tender with an agreement executed duly
signed in Kerala Stamp Paper of value of ` 200 and EMD
1% of the total cost of the articles tendered by way of
DD in favours of the Principal, Rajiv Gandhi Institute of
Technology, Kottayam. Tender without agreement and
EMD will be rejected and detailed specification will be
issued along with the tender forms.
Rajiv Gandhi Institute of Technology,
(Sd.)
Kottayam.
Principal.
eLp Z¿Lmkv ]ckyw
[\º¿ 02/2018˛-19]
\º¿ C-˛1071/2017.
2018 sk]v‰w-_¿ 17.
s\cp-h{ºw Kh¨sa‚ v sSIv\n-°¬ sslkv°q-fnse Hm^o-kn-te°v Bh-iy-amb ^¿Wn-®-dp-Iƒ hnX-cWw
sNøphm≥ Xøm-dp-≈-h-cn¬ \n∂pw ap{Z-sh®Xpw a’-cmSn-ÿm-\-Øn-ep-ap-≈-Xp-amb Z¿LmkpIƒ £Wn®psIm-≈p-∂p.
AS¶¬ XpI—` 1,80,000.
Z¿Lmkv t^mdØns‚ hne—` 500 + Pn.-F-kv.-Sn.
Z¿LmkpIƒ hn¬°p∂ Ah-km\ XobXn—2˛11˛2018, 11 aWn.
Z¿LmkpIƒ kzoIcn°p∂ Ah-km\ XobXn—2˛11˛2018, 2 aWn.
Z¿Lmkv Xpd-°p∂ Xob-Xn—2-˛11-˛2018, 3 aWn.
Z¿Lmkv t^mdhpw hnh-c-߃ AS-ßnb enÃpw ta¬∏-d™ \nc-°n¬ s\cp-h{ºw Kh¨sa‚ v
sSIv\n-°¬ sslkv°qƒ kq{]-≠ns‚ Hm^o-kn¬ \n∂v t\cn´pw ` 500 + 18% Pn.-F-kv.-Sn.˛bv°v X]m-enepw e`n-°p-∂-
Xm-Wv. A ¬ t^md-Øn¬ Xs∂ Z¿Lm-kp-Iƒ ka¿∏n-t°-≠-Xm-Wv.
Z¿Lmkv t^md-߃ X]m¬am¿§w Bh-iy-ap-≈-h¿ 26-˛10-˛2018-˛\v apºmbn ` 27 X]m¬ Nm¿÷mbn A[nIw
Abbv-t°-≠-Xm-Wv.
Z¿Lmkv XpI-bpsS 1% (an-\naw ` 1,500) \nc-X-{Zhyhpw ` 200 hne-bp≈ tIcf k¿°m¿ ap{Z-]-{X-Øn¬ Xøm¿
sNbvX Hcp {]mcw` Icmdpw \n›-b-ambpw Z¿Lm-kns‚ IqsS AS°w sNtø-≠-Xm-Wv. Z¿Lmkv t^md-߃ ssIam‰w
sNøp-hm≥ ]mSp-≈-X-√. \n›nX Znh-k-Øn\pw ka-b-Øn\pw ap≥]mbn Z¿Lm-kp-Iƒ Xmsg H∏p-sh® tae-[n-Imcn
ap≥]msI e`n-®n-cn-t°-≠Xm-Wv. sshIn e`n-°p-∂tXm Bh-iy-amb D≈-S-°-߃ C√m-ØtXm Bb Z¿Lm-kp-Iƒ
\nc-kn-°p-∂-Xm-bn-cn-°pw. Z¿Lmkn\p-th-≠n-bp≈ aWn-tbm¿U-dp-Iƒ 25-˛10-˛2018˛t\m AXn\p ap≥t]m \n›-b-ambpw
Hm^o-kn¬ e`n-®n-cn-t°-≠-Xm-Wv. ta¬∏-d™ Xob-Xn-Iƒ GsX-¶nepw Imc-W-Øm¬ Ah[n Znh-k-ambn {]Jym-]n-
°p-∂-]£w sXm´-SpØ {]hrØn Znhkw Xs∂ ]cn-K-Wn-°p-∂-Xm-Wv. t^md-Øns‚ hne a‰p Xc-Øn¬
kzoI-cn-°p-∂-X-√.
768
16th OCT. 2018]
STORES PURCHASE
1429
[No.—02/2018-19].
No. E/1071/2017. 17th September 2018.
Sealed competitive tenders are invited for the supply of the following Furniture.
Superscription—Supply of furnitures for the use of Office.
Last date and time of sale of tender form—2-11-2018, 11 a. m.
Last date and time of receipt of tender form—2-11-2018, 2 p. m.
Opening date and time of tenders—2-11-2018, 3 p. m.
Tender forms and list can be had from the Office of the Superintendent, Govt. Technical High School,
Neruvambram, P. O. Payangadi, Pin-670 303, Kannur, on a cash/M.O. remittance of ` 500 + 18 % G.S.T. No other
form of remittance will be accepted.
Estimate Cost—` 1,80,000.
Those who want tender form by post should send an additional amount of ` 27 towards the postal charge on or
before 26-10-2018.
EMD—1% of the quoted value by means of Demand Draft/FDR drawn in favour of the Superintendent (Minimum
of ` 1500), Govt. Technical High School, Neruvambram from a Nationalized bank, Bankers cheque will not be accepted.
Tenders should be accomplished by an agreement in Kerala Stamp Paper worth ` 200. Tenders without
Agreement, EMD will be rejected. Tender should be clearly superscribed and the same will be opened at the specified
date and time on the presence of such tenderer or their authorized representative. Late tenders will not be considered.
If the opening date happens to be a holiday the tender will be opened on the next working day.
PURCHASE OF OFFICE FURNITURE
Sl. No.
Name and Specification
Quantity
1
(AW) Managers Table 1520 mm (L) × 760 mm (W) × 760 mm (H)
2 Nos.
2
Executive chair Revolving 590 AH 590(W) 1060 BH
1No.
3
(AW) Partition-Wood-glass 1.2 Mtr H 1000L 1000W 60D
8No.
4
(AW) Office Table Two Seater with computer facility (as per drg)
2400 L 760 W 910 H
1 No.
5
(AW) Executive Visitors Chair 590 AH 580W 950 BH
3Nos.
6
(AW) Partition-Wood-glass 1.5 Mtr. H for 7.5 mts dinning room 1000 L
1000 W 60 D
Total Cost including Transportation and fitting—` 1,80,000.
Govt. Technical High School,
Neruvambram, Payangadi P. O.,
(Sd.)
Kannur District, Pin-670 303.
Superintendent.
Z¿Lmkv ]ckyw
[\º¿ 01/2018˛-19]
\º¿ F3˛496/2018.
2018 sk]v‰w-_¿ 12.
sam{Km¬]p-Øq¿ Kh. sSIv\n-°¬ sslkv°q-fnse Ce-Ivt{Sm-WnIvkv em_n-te°v D]-I-c-W-߃ hnX-cWw
sNøp∂-Xn\v ap{Z-h® Z¿Lm-kp-Iƒ £Wn-®psIm-≈p-∂p.
AS-¶¬ XpI—` 2,43,450.
Z¿Lmkv \º¿—01/2018-˛19.
km[-\-ß-fpsS t]cv—Ce-Ivt{Sm-WnIvkv em_n-te°v D]-I-c-W-߃.
FÆw—16.
\nc-X-{Zhyw—1%.
769
16th OCT. 2018]
STORES PURCHASE
1430
Z¿Lm-kns‚ hne—` 500 + Pn.-F-kv.-Sn. 18%.
Z¿Lmkv sImSp-°p∂ Ah-km\ Xob-Xnbpw ka-bhpw—25˛10˛2018 D®bv°v 2 aWn.
Z¿Lmkv kzoIcn-°p∂ Ah-km\ Xob-Xnbpw ka-bhpw—29˛10˛2018 cmhnse 11 aWn.
Z¿Lmkv Xpd-°p∂ Xob-Xnbpw ka-bhpw—29˛10˛2018 D®bv°v 2 aWn.
Z¿Lm-kn\v ]pdØv “Z¿Lmkv \º¿ {]tXyIw tcJ-s∏-Sp-tØ-≠-Xm-Wv.” Z¿Lmkv kq{]≠v,
Kh. sSIv\n-°¬ sslkvIqƒ, _{ZUp° ]n. H., Imk-d-tKm-Uv- F∂ hnem-k-Øn¬ \n›nX Xob-Xn-bv°Iw FØn-t°-
≠-Xm-Wv. sshIn e`n-°p∂ Z¿Lm-kp-Iƒ kzoI-cn-°p-∂-X-√. Z¿Lm-kp-Iƒ \n›nX ka-bØv lmP-cm-°p∂
Icm-dp-Im-cpsStbm Ah¿ Npa-X-e-s∏-Sp-Øn-bn-cn-°p∂ {]Xn-\n-[n-I-fp-sStbm km∂n-≤y-Øn¬ Xpd-°p-∂-Xm-Wv.
Z¿Lmkv t^mdw apI-fn¬ ImWn-®n-cn-°p∂ \nc°v {]Im-chpw Uyqπn-t°‰v t^mdw ` 200 + 18% GST tN¿Øv
AS-®m¬ sSIv\n-°¬ sslkvIqƒ, sam{Km¬]p-Øq¿ Hm^o-kn¬ \n∂v F√m {]hrØn Znh-k-ß-fnepw cmhnse
9 aWn°pw D®bv°v 2 aWn-°p-an-S-bn¬ e`n-°p-∂-Xm-Wv. t^mdw X]m¬ hgn Bh-iy-ap-≈-h¿ ta¬]-d™ \nc-°n¬
IqSp-X-embn ` 50 aWn-tbm¿U¿ Ab-®p-X-tc-≠-Xm-Wv. sN°v, {Um^v‰v, X]m¬ Ãmºv apX-em-bh t^md-Øns‚
hne-bmbn kzoI-cn-°p-∂-X-√. hmßnb t^md-Øns‚ hne ]n∂oSv Xncn®v \¬Ip-∂-X-√. t^mdw hmßn-bm-fns‚
t]cn¬Xs∂ Z¿Lmkv ka¿∏n-t°-≠-Xm-Wv. Z¿Lmkv hyh-ÿ A\p-k-cn®v Z¿Lmkv t^md-tØm-sSm∏w ` 100˛s‚
tIcf ap{Z-∏-{X-Øn-ep≈ \n›nX amXr-I-bn-ep≈ Hcp DS-º-Snbpw km[\ kma-{Kn-I-fpsS samØw tcJ-s∏-Sp-Ønb
hne-bpsS Hcp iX-am\w \nc-X-{Z-hy-ambpw ka¿∏n-t°-≠-Xm-Wv. A√m-Øh \nc-kn-°p-∂-Xm-Wv. Z¿Lm-kp-Im-c≥
` 150 aWn-tbm¿U¿ klnXw Bh-iy-s∏-´m¬ tIcf ap{Z-∏{Xw X]m¬hgn e`y-am-°p-∂-Xm-Wv. Unam‚ v {Um^v‰pIfpw
a‰pw tÉv _m¶v Hm^v C¥y, Imk-d-tKmUv imJ-bn¬ \n∂v amd-Ø-°- coXn-bn¬ FSp-t°-≠-Xm-Wv.
km[-\-ßtfbpw Z¿Lm-kn-t\bpw kw_-‘n® IqSp-X¬ hnh-c-߃°v Hm^o-kp-ambn _‘-s∏-SpI.
Tools and Equipments-Electronic Lab:
Sl.
Items
Specification
Quantity
No.
(1)
(2)
(3)
(4)
1
Analog Oscilloscope
DC to 20MHz Bandwidth lmV/div Sensitivity on Both Channels CH1 & CH2
3
Independent Channels CH1 or CH2 Trigger Signal Output X-Y Operation
10ns/div to 0.2s/div Time Base Display Modes: CH1, CH2, DUAL (CH1,
CH2 ALT/CHOP), Algebraic ADD and SUBTRACT, CH2 INVT & X-Y
(CH1 as X, CH2 as Y). Input Impedance: 1 M ohms//25pF approx.
Maximum Input: 400 Volts (dc + peak ac).Voltage Internal Trigger:
CH1, CH2 or Alternate. Signal TRIGGER SIGNAL OUTPUT Output Voltage:
Minimum 100mV for 1 div of CH1/CH2 trigger signal. 8 × 10 cm
Display Internal Graticule TV Triggering Frame (V) & Line (H) Line
Trigger, ALT Triggering, Trigger Lock Facility Single Sweep, Variable
Hold Off, Component Tester.
2
Analog Function
Frequency Range 0.01 Hz to 1 MHz in 8 decade ranges. Maximum
5
Generator
Output Voltage
(a) Into 50 ohms 10V p-p output.
(b) Open Circuit 20V p-p output.
Output Waveforms Sinusoidal, Triangle, Square, Ramp,
Pulse, TTL (Sync) & DC Outputs.
Duty Cycle 10% to 90% variable
Frequency Indication±1%±1 digit. Sine Distortion<1% (typical).
Amplitude Indication 3 digit seven segment display (Vp-p)
3
Digital True RMS
DC millivolts
3
Multi Meter
Range: 600.0 mV
Resolution: 0.1 mV
Accuracy: ± ([% of reading] + [counts]): 0.5% + 2 DC volts
Range/Resolution: 6.000 V to 600.00 V/0.1 V
Accuracy: ± ([% of reading] + [counts]): 0.5% + 2
AC millivolts 1 true-rms
Range: 600.0 mV
770
16th OCT. 2018]
STORES PURCHASE
1431
Resolution: 0.1 mV
Accuracy: 1.0 % + 3 (dc, 45 Hz to 500 Hz)2.0 % + 3 (500 Hz to I kHz)
AC volts 1 true-rms
Range/Resolution: 0.01V to 600.0 V/0.1 V
Accuracy: 1.0 % + 3 (dc, 45 Hz to 500 Hz)2.0 % + 3 (500 Hz to l kHz)
Accuracy: Beeper on <20 Ω, off > 250 Ω; detectsopens or shorts of
500 µs or longer. Ohms
Range/Resolution: 0.1 Ω- 6.000 MΩ/0.001 MΩ
Diode Test Capacitance Range/Resolution: 1000 nF - 100 µF to 1000 µF
Range/Resolution: > 1000 µF
Accuracy: 5% + 20%
Lo-Z Capacitance
Range: 1 nF to 500 µF
AC amps true-rms (45 Hz to 500Hz)
20 A overload for 30-seconds max DC amps
Range/Resolution: 6.000 A/0.001 A
Range/Resolution: 10.00 A/ 0.01 A
Accuracy: 1.0% + 3
20 A overload for 30-seconds max
Range/Resolution: 0.1Hz to 50 kHz/0.01 kHz
4
Linear Regulated
Output Range 0-32V.
5
Power Supply
Regulation Line <0.01% ±3mV for 10% change in line.
Load <0.01% ±3mV for load change from zero to full load.
Ripple & Noise <1 mV rms max.
Indication CV mode LED Green.
Constant Current Mode Output Range 0-2A.
Regulation Line <0.01% ±2mA for 10% change in line.
Load <0.1% ±4mA for load change in output voltage from
zero to max. output voltage.
Ripple & Noise <2mA rms max.
Indication CC mode LED Red.
Protections Automatic overload and short circuit protection.
Metering Digital Standard Single meter to read V/A of each
output with a selector switch.
Input Line Voltage 230V AC ±10%, 50Hz.
5
Powered Bread
Input Power Source AC Line: 110/120V AC @ 60Hz, or 210-220V
10
Board
AC @ 50Hz
Power Supplies Fixed: +5V ± 0.2V DC, 1.0A max, current limited
Load Regulation better than 0.8% +/-
Ripple, <4mVp-p @1A
Variable DC: Factory Set to +15V DC, with internal
adjustment +5.5 to 18V DC, 0.5A max @ +15V DC
Load Regulation better than 1% +/-
Ripple less than l0mVp-p @ 0.5A
Variable DC: Factory Set to-15V DC
Load Regulation better than 1% +/-
Ripple less that 10m Vp-P @ 0.5A
Binding Posts (1) Black: Chassis Ground
(3) Red: Power Supply Outputs +5V DC, +15V DC & -15V DC
Breadboards 2250 Tie points with (8) 100 pin and (2)80
pin power rails and accommodates up to 24 (14 pin) IC’s
Weight 2.5 Kg. approx.
Dimensions 9.8 × 6.6 × 3.3" (249 × 167 × 86.7 mm)
(1)
(2)
(3)
(4)
771
Gaz. No. 41/2018/DTP (Stores Purchase).
16th OCT. 2018]
STORES PURCHASE
1432
6
Temperature
(a) Digital Temperature Readout for Set/Run Modes.
1
Controlled
(b) MCH Solid State Element used as compared to winding element used
Soldering Station
in other’s products.
(c) Temperature Range: 200 to 480 deg C.
(d) Guaranteed Operation 1000 hours.
(e) Genuine Soldron quality product with 6 months Warranty.
(f) Spare Accessories and Service available from Soldron, unlike similar
products from others.
(g) ESD Safe.
7
Audio Power
6 Mic & 2 Aux Inputs.
1
Amplifier
Preamplifier output for connecting to a
Booster Amplifier and for recording the programme.
Bass & Treble Controls.
TZA-1500 permits connecting 100V (LMT) type speakers
to one Zone and low impedance type speakers to other
Zone without causing overloading and over heating.
Instant transfer to DC power (Car Battery) if AC power fails.
Zone On/Off facility. Output levels of each Zone can be set
independently to desired levels and the zones can be
switched On/Off without disturbing the volume settings.
8
Speaker System
Input Power 100W RMS
2
Configuration Two Way
Frequency Response 55-20,000Hz
Speaker 1 × 12", ∅ 1.5" Voice Coil
High Frequency Unit 1 x Piezo Horn Tweeter 2" × 5" SPL at (1W/1m) 97 dB
Max. Rated SPL 117 dB
Nominal Impedance 8Ω
Sealed Enclosure
9
Microphone
High output Neodymium cartridge, wide frequency response for clean
2
sound reproduction. Must be Supplied with quick detachable holder
with 3-pin professional XLR connector & 6 mtrs. twin core shielded low
noise cable.
Dual channel VHF high band wireless microphones Handheld
dynamic unidirectional transmitter with a three position slide switch and
Low Battery LED indicator. ALC circuit handles high sound pressure levels
without distortion.
10
Wireless Microphone
Separate output volume controls for both channels on the front panel of the
1
receiver.
Power ON/OFF switch and 6.3mm (¼") phone jack for audio
output on the rear panel of the receiver.
Each transmitter operates on 1 × 9V battery.
Receiver operates on 12V DC through an AC adaptor,
supplied along with the transmitter.
11
LED TV
IPS LED Super Bright Panel
1
Screen Resolution - 1,366 (W) × 768 (H)
Picture Mode - Dynamic/Normal/Cinema/True Cinema
Hexa Chroma Drive Hexa Chroma Drive
V-Audio surround, Full Range × 2, Woofer × 1, Woofer -
Powerful Woofer 2.1, Speaker Output-TBD, Sound Mode-Music/Speech/User
Power Supply AC Auto 110-240 V, 50/60 Hz
USB 1 (side; USB 2.0), HDMI*8-1 (side), 1 (rear)
(1)
(2)
(3)
(4)
772
16th OCT. 2018]
STORES PURCHASE
1433
12
Soldering Iron
25W, 230v ac 50hz input supply
10
13
Wire Stripper
Wire Gauge screw in slot holds stripping die to proper size for repeated
10
jobs and prevent nipped wire
H-1 FEET L-1/2 FEET W-200 GM Fast cutting action with black oxide finish
Sharp cutting edges for all industrial uses.
Strips and cuts wire 12-24 gauge
14
Tweezer
17.6 × 4.4 × 04 cm SS material
20
15
Desoldering Pump
Manual type
20
16
Screw Driver Set
The blade is differentially hardened & tempered.
10
Hardness on tip: 55 to 58 HRC.
The blade tip is magnetized to lift small screw etc.
from confined spaces or to hold the screw in position
The handle is made from high grade CA Plastic.
Technical High School, Mogral Puthur,
(Sd.)
Badradukka Kasaragod.
Superintendent.
(1)
(2)
(3)
(4)
773