compose.kerala.gov.in

egazette.kerala.gov.in

printing.kerala.gov.in

േകരള സരകാര

GOVERNMENT OF KERALA

േകരള ഗസറ്

KERALA GAZETTE

ആധികാരികമായി ്പസിദെപടുതുനത

PUBLISHED BY AUTHORITY

Regn.No. KERBIL/2012/45073

dated 2012-09-05 with RNI

Reg No.KL/TV(N)/634/2021-2023

വാല്ം 13

Vol. XIII

നമര

No.

െചാവ, 2024 ഡിസംബര 10

Tuesday, 10th December 2024

1200 വൃശികം 25

25th Vrischikam 1200

1946 അ്ഗഹായനം 19

19th Agrahayana 1946

Part III

Store Purchase

േകരള സരകാര

GOVERNMENT OF KERALA

2024

This is a digitally signed Gazette.

Authenticity may be verified through https://compose.kerala.gov.in/

ദർഘാഴ് ഩയഴയൿ

[നമ്പർ 12/2024-2025]

നമ്പർ AHD/TVM/HVB/PALD/709/2024-B.

2024 നറൿഫർ 16

ഇൻസ്റ്റിറ്റ്യൂട്ട് ഒപ് ആനിഭൽ ഹവൽത്ത് ആൻഡ് ഹററ്റ്ിനറി ഫയമാളജിക്കൽഴ് എന്ന

സ്ഥാഩനത്തിഹര ആറലയത്തിയരമ്ക്കാമി ചുറഹെ ഩട്ടിക പ്ഩകായഭുള്ള ഴാധനങ്ങൾ ഴപ്ലൈ

ഹചയ്യുന്നതിന് താത്ഩയയഭുള്ള റയക്തികളിൽ നിന്നുൿ ഭുപ്ദ റച്ച ദർഘാഴുകൾ ക്ഷണിക്കുന്നു.

ഏകയദല റിര—` 1,83,965.

നിയതപ്ദറയൿ—എസ്റ്റിയഭറ്റ്് റിരമുഹെ 1%.

ദർഘാഴുകൾ ഉള്ളെക്കൿ ഹചമ്തിട്ടുള്ള കററിനുഩുറത്ത് "ദർഘാഴ് നമ്പർ 12/2024-

2025 രാഫ് ഹറമർ & ഗ്ലാഴ് ഹറമർ 2024-2025" എന്ന് യയഖഹെെുത്തിമിയിക്കണൿ. ദർഘാഴുകൾ

ഴവീകയിക്കുന്ന അറഴാന തീമതി 17-12-2024 ഉച്ചക്ക് 12 ഭണി ആണ്. ദർഘാഴുകൾ "ഡമറക്ടർ

ഐ.എ.എച്ച് & റി.ഫി, ഩച്ച ഩി. ഑., ഩായരാെ്" എന്ന യഭൽറിരാഴത്തിൽ നൽയകണ്ടതാണ്.

താഭഴിച്ചു രബിക്കുന്ന ദർഘാഴുകൾ ഴവീകയിക്കുന്നതല്ല. രബിച്ച ദർഘാഴുകൾ 17-12-2024

തീമതി ഉച്ചമ്ക്ക് 3 ഭണിമ്ക്ക് ഫന്ധഹെട്ട റയക്തിമുഹെയമാ അറഹയ പ്ഩതിനിധീകയിക്കുന്ന

ആളുഹെയമാ ഴാന്നിദ്ധ്യത്തിൽ തുറന്നു ഩയിയലാധിക്കുന്നതാമിയിക്കുൿ. 16-12-2024 തീമതി

3 ഭണിറഹയ ഡമറക്ടർ ഐ.എ. എച്ച് & റി.ഫി ഩച്ച ഩി.഑., ഩായരാെ് എന്ന യഭൽറിരാഴത്തിൽ

നിന്നുൿ ദർഘാഴ് യപാഭുകൾ താഹെഩറമുന്ന നിയക്കിൽ രബിക്കുന്നതാണ്.

ദർഘാഴ് യപാൿ അസ്സൽ— ` 400 + GST @ 18%.

ദർഘാഴ് യപാൿ ഡയൂൈിയക്കറ്റ്് — ` 200 + GST 18%.

ദർഘാഴ് യപാഭുകൾ VPP ആമി രബിക്കുന്നതല്ല. ദർഘാഴ് യപാഭിഹെ റിര ഹയാക്കൿ

ഩണഭാമിയട്ടാ ഭണിയമാർഡർ ആമിയട്ടാ ഭാപ്തയഭ ഴവീകയിക്കുകമുള്ളൂ. ഹചക്ക്, പ്ഡാപ്റ്റ്്, സ്റ്റാമ്പ്,

യഩാസ്റ്റൽ ഒർഡർ തുെങ്ങിമറ ദർഘാഴ് യപാഭിഹെ റിരമാമി ഴവീകയിക്കുന്നതല്ല. അെച്ച

ദർഘാഴ് റിര ഑യു കായണറലാരുൿ തിയിഹക നര്കുന്നതല്ല. ദർഘാഴ് യപാഭുകൾ പ്ലകഭാറ്റ്ൿ

ഹചയ്യാൻ ഩാെില്ല. ദർഘാഴിൽ ഩഹെെുക്കുന്നതിനാമി ` 1840 (ആമിയത്തി എണ്ണൂറ്റ്ി നാല്പത് യൂഩാ

ഭാപ്തൿ) EMD ആമി ഑െുയക്കണ്ടതാണ്. MSME ഹയജിഴ്യപ്െളൻ ഉഹണ്ടെിൽ, EMD ഑െുക്കന്നതിൽ

നിന്നുൿ ഇളറ് യനെുന്നതിനാമി, ഭതിമാമ യയഖ വാജയായക്കണ്ടതാണ്. കൂെുതൽ റിറയങ്ങൾ

പ്ഩറർത്തി ദിറഴങ്ങളിൽ ഒപീഴുഭാമി ഫന്ധഹെട്ടാൽ അറിമാറുന്നതാണ്.

പ്ഩയതയക കായണൿ ഇല്ലാഹത തഹന്ന ദർഘാഴുകൾ ഩൂർണഭായമാ ബാഗികഭായമാ

നിയഴിക്കുന്നതിയനാ ഴവീകയിക്കുന്നതിയനാ ഉള്ള അധികായൿ ഡമറക്ടർ, ഐ.എ.എച്ച് &

റി.ഫിമിൽ നിക്ഷിഩ്തഭാമിയിക്കുൿ.

[NO. 12/2024-2025]

No. AHD/TVM/HVB/PALD/709/2024-B. 16th November 2024.

Sealed competitive tenders are invited for the supply of labware and glassware as per the following

specification and requirement.

Estimated Approximate Cost—` 1,83,965.

EMD— 1% of the Estimated Cost.

914

KERALA GAZETTE

Part III

____________________________________________________________________________________________________________________________

This is a digitally signed Gazette.

Authenticity may be verified through https://compose.kerala.gov.in/

LIST OF ITEMS

Sl.

No.

Name of Article

Specification

Make & Product Code

Number

Actual

Requirement

(1)

(2)

(3)

(4)

(5)

1 Beaker, 250 ml

Stainless steel, 250 ml

2 ^{Blood Collection}

tubes

Blood collection tubes 2ml capacity ,

double cap with K3 EDTA 3.6 mg without

vacuum, Pack of 100 nos, in packs

3 Cavity slides

One deep cavity per slide, 10 nos in one

box, in boxes

Any Make

Conical Flask with

narrow mouth and

Rim, 100 ml

OD x Ht = 64 x 105 mm, Erlenmayer,

Graduated Borosilicate

Borosil Cat No.

4980016

Conical flask with

screw cap, 100 ml

capacity

With PP Screw Cap, Autoclavable upto

140 degree C with neck specification

GL 25

Borosil Cat No.

5021016

6 Culture tube-15ml

Flat bottom with screw cap & rubber liner

approx OD X L 25 mm X 57 mm

Borosil Cat No.

9910007

105

7 ^{Flexiloops -}

Disposable Plastic

Sterilized flexible, calibrated loop with a

streaker/stabber tip, size 4.4mm diameter,

calibrated to 0.01 ml and individually

sealed. Packing 1 x 100 in packets

Himedia Stabiflexiloop

Plus- 4. Product code:

PW053-1 x 100 No

8 Forceps

Stainless steel, Plain, 5 inch length

9 ^{Forceps Stainless}

steel

Thump type, Pointed, 5 inch length

10 Full arm gloves

in pairs

500

11 ^{Glass beads without}

holes

5 mm diameter, in Kg

12 ^{Glass beads without}

holes

3 mm diameter, in Kg

13 ^{Glass bottle, 100 ml}

capacity

With PP Screw Cap and PP pouring ring,

Autoclavable upto 140 degree C, OD x Ht

= 56 x 100 mm

Borosil Cat No

1501016

14 ^{Glass bottle, 500 ml}

capacity

With DIN threadgraduated, Clear, with PP

Screw Cap and PP pouring ring,

Autoclavable upto 140 degree C, Neck ID

GL 45 mm

Duran/ Borosil -

Catalogue No. 1501024

15 ^{Glass bottle, 5000 ml}

capacity

With DIN threadgraduated, Clear, with PP

Screw Cap and PP pouring ring,

Autoclavable upto 140 degree C, Neck ID

GL 45 mm

Duran/ Borosil -

Catalogue No. 1501033

Individually

Wrapped Sterile Tips

in peel off pouch

Medical grade PP confirming to USP

grade class VI, Capacity 1000 microliter,

Requirement in numbers

Tarson make Code

520057

10th December 2024

KERALA GAZETTE

915

____________________________________________________________________________________________________________________________

This is a digitally signed Gazette.

Authenticity may be verified through https://compose.kerala.gov.in/

17 ^{Lens cleaning tissue}

Paper

Book of 100 sheets

18 ^{Measuring Cylinder}

100 ml

Graduated, Borosilicate Glass

Borosil Cat No.

3022016

19 ^{Measuring Cylinder}

250 ml

Graduated, Borosilicate Glass

Borosil Cat No.

3022021

20 ^{Measuring cylinder}

50 ml

Graduated, Borosilicate glass

Borosil Cat No.

3022012

21 Metal loops holder

(without loop) Brass rod holder with heat

resistant handle where any size of Nichrome

wire can be inserted - 1 x 8 numbers

Himedia LA 040

22 ^{Microscope slide}

76x26x1mm

One end frosted, 50 numbers in one box,

in boxes

Borosil 9100D01

Microtip Box for

holding 96 numbers

of 1000 micro liter

tips

Material - PP Confirming to US FDA 21

CFR Autoclavable - capacity 200-1000µl

Tarson Cat No 524054

or equivalent

24 Needle Hypodermic Disposable, 18 gauge. 1.5 inch

220

25 Needle Hypodermic Disposable, 16 gauge

26 Needle, hypodermic Disposable, 1/2" length 21 G

27 Needle, hypodermic Disposable, 1" length 20 G

150

28 ^{Nichrome Loops}

assorted

Each pack containing 3 pieces of each

nichrome loop having dia meter 4 mm,

2mm, 1.3 mm and 1 no straight wire, 1 no

double wound - in packs

Himedia LA 023

Nitrile Examination

Gloves 9.5" length -

Size Medium

Material - Blue Nitrile Thickness 4 mils in

nos

Tarson Cat No 370110

or equivalent

1440

Nitrile Examination

Gloves 9.5" length -

Size Small

Material - Blue Nitrile Thickness 4 mils in

nos

Tarson Cat No 370100

or equivalent

200

31 Para film M

2 inch x 250 feet

32 Petri Dish, Glass

Ht x OD = 17 mm x 100 mm Borosilicate

Glass

Borosil Cat No

3160077

33 Petri Dish, Glass

Ht x OD = 17 x 100 mm Amber coloured

in numbers

Jain Scientific Cat No:

603/4

34 ^{Pipette, Glass, 10.0}

Graduated, 10 x 0.1 ml, etched, white

markings, Borosilicate glass

Borosil Cat No

7082P06

35 ^{Pipette, Plastic,}

Disposable

Sterilized, 25 ml capacity

Borosil Cat No

6502501018

Reservoir for

reagents with 75 ml

capacity

Material - PP Confirming to US FDA 21

CFR Autoclavable

Tarson Cat no 524090

or equivalent

Round Flat bottom

Flask with Beaded

Rim, 2000 ml

Capacity

OD x Ht = 167 x 237 mm; neck OD 50

mm, Borosilicate Glass

Borosil Cat No

4060030

916

KERALA GAZETTE

Part III

____________________________________________________________________________________________________________________________

This is a digitally signed Gazette.

Authenticity may be verified through https://compose.kerala.gov.in/

38 Roux Flask

1000 ml capacity, borosilicate glass.

Approximate Breadth x width x height

126 x 56 x 265 mm and neck ID 26 mm

Borosil Cat No

1290029

39 ^{Rubber teat, Red}

Colour

Medium, for use with 10 ml pipette

40 Sample container

Plastic, wide neck, transparent, 50 ml,

Material PP/ HDPE confirming to US

FDA 21 CFR , Sterile

Tarson make Code

510030

100

41 ^{Scalpel Blade B P No}

Stainless steel, sterile, To fit in Scalpel

handle No 3

42 Scissors

Stainless steel, Straight 8 "

43 Scissors

Stainless steel, straight 5"

44 ^{Scissors, Stainless}

steel

Curved, 6 "

45 ^{Scissors, Stainless}

steel

Long straight with plastic handle for cloth

cutting (Tailor's Scissors)

46 Spirit lamp

Glass 150 ml capacity

47 Surgical gloves

Size Small - Sterile, in pairs

48 Surgical gloves

Size Medium - Sterile, in pairs

500

49 Syringe

Glass make, 1 ml capacity

50 ^{Syringe with}

hypodermic needle

Disposable, 5 ml

120

51 ^{Syringe with}

hypodermic needle

Disposable, 10 ml

200

52 ^{Syringe, disposable 1}

1ml (Tuberculin, plastic), not insulin

syringe needle size 0.45 x 13 mm/ 26 G x

1/2, Sterile EO, in numbers

Dispovan make or

equivalent

160

Syringe, disposable

with hypodermic

needle

2 ml plastic with hypodermic needle of

size 23 guage

480

54 ^{Syringe, disposable,}

50 ml

Disposable, 50 ml plastic

55 Syringe filters

Presterilised, 0.2 µm size, made of

Durapore PVDF Membrane, 33 mm,

Gama sterilized; Pack of 100

Millipore Make

Millex-GV - 33 mm

Catalogue No:

SLGV033RS

56 Test tube with Rim

15 x 150 mm Borosilicate Glass

Borosil catalogue no

9800U05

57 Tuberculine Syringe Glass with metal piston

Any Make

58 Vacuutainer tubes

Blood collection tubes 4ml capacity

sterile for plain serum double cap without

vacuum 4ml capacity, Pack of 100 nos, in

packs

59 Wash bottle

250 ml capacity, Material - LDPE

TARSON Catalogue

No 561110

10th December 2024

KERALA GAZETTE

917

____________________________________________________________________________________________________________________________

This is a digitally signed Gazette.

Authenticity may be verified through https://compose.kerala.gov.in/

The tender should be superscribed "Tender No. 12/2024-2025 - Purchase of Labware and

Glassware- 2024-2025" and should be addressed to the "Director, Institute of Animal Health

&Veterinary Biologicals, Palode, Pacha P. O., Thiruvananthapuram, Kerala , Pin 695 562". Last date

for the receipt of tender is 3-12-2024 12.00 noon. Late tender will not be accepted. The tender will

be opened at 03.00 pm on the same day in the presence of the tenderers or their authorised

representatives who may present at the time of opening of tender.

Intended tenderers may apply to the "Director, Institute of Animal Health &Veterinary

Biologicals, Palode, Pacha P. O., Thiruvananthapuram, Pin. 695 562" for obtaining the prescribed

tender form on which the tender should be submitted. Application for the tender form should be

accompanied by a cash remittance of ` 400 plus GST 18% which is the price fixed for a set of

tender form and it is not refundable. The tender forms are not transferable. Sale of tender form will

be closed at 3 pm on 2-12-2024. Cheque, postal stamp, Demand Draft etc. will not be accepted

towards the cost of tender form. The form will not be sent by V P P. Duplicate forms if required will

be available at ` 200 plus GST 18 Extra per copy. The participating firm should present EMD of `

1840 (Rupees One Thousand Eight Hundred and Forty Only). If the participating firm is registered

as MSME, relevant documents should be submitted for EMD exemption. Further details if any can be

sought from this office on all working days during office hours.

Institute of Animal Health and

(Sd.)

Veterinary Biologicals, Palode,

Director.

Thiruvananthapuram.

918

KERALA GAZETTE

Part III

____________________________________________________________________________________________________________________________

This is a digitally signed Gazette.

Authenticity may be verified through https://compose.kerala.gov.in/

ദർഘാഴ് ഩയഴയൿ

[നമ്പർ 13/2024-2025]

നമ്പർ AHD/TVM/HVB/PALD/706/2024-B

2024 നറൿഫർ 16.

ഇൻസ്റ്റിറ്റ്യൂട്ട് ഒപ് ആനിഭൽ ഹവൽത്ത് ആൻഡ് ഹററ്റ്ിനറി ഫയമാളജിക്കൽഴ് എന്ന

ഏകയദല റിര—` 1,71,515.

നിയതപ്ദറയൿ—എസ്റ്റിയഭറ്റ്് റിരമുഹെ 1%.

ദർഘാഴുകൾ ഉള്ളെക്കൿ ഹചമ്തിട്ടുള്ള കററിനുഩുറത്ത് "ദർഘാഴ് നമ്പർ 13/2024-2025

ഹകഭിക്കൽഴ് 2024-2025" എന്ന് യയഖഹെെുത്തിമിയിക്കണൿ. ദർഘാഴുകൾ ഴവീകയിക്കുന്ന

അറഴാന തീമതി 19-12-2024 ഉച്ചക്ക് 12 ഭണി ആണ്. ദർഘാഴുകൾ "ഡമറക്ടർ ഐ.എ.എച്ച്

& റി.ഫി, ഩച്ച ഩി. ഑., ഩായരാെ്" എന്ന യഭൽറിരാഴത്തിൽ നൽയകണ്ടതാണ്. താഭഴിച്ചു

രബിക്കുന്ന ദർഘാഴുകൾ ഴവീകയിക്കുന്നതല്ല. രബിച്ച ദർഘാഴുകൾ 19-12-2024 തീമതി ഉച്ചമ്ക്ക്

ഭണിമ്ക്ക്

ഫന്ധഹെട്ട

റയക്തിമുഹെയമാ

അറഹയ

പ്ഩതിനിധീകയിക്കുന്ന

ആളുഹെയമാ

ഴാന്നിദ്ധ്യത്തിൽ തുറന്നു ഩയിയലാധിക്കുന്നതാമിയിക്കുൿ. 18-12-2024 തീമതി 3 ഭണിറഹയ

ഡമറക്ടർ ഐ.എ. എച്ച് & റി.ഫി ഩച്ച ഩി.഑., ഩായരാെ് എന്ന യഭൽറിരാഴത്തിൽ നിന്നുൿ

ദർഘാഴ് യപാഭുകൾ താഹെഩറമുന്ന നിയക്കിൽ രബിക്കുന്നതാണ്.

ദർഘാഴ് യപാൿ അസ്സൽ— ` 400 + GST @ 18%.

ദർഘാഴ് യപാൿ ഡയൂൈിയക്കറ്റ്് — ` 200 + GST 18%.

ദർഘാഴ് യപാഭുകൾ VPP ആമി രബിക്കുന്നതല്ല. ദർഘാഴ് യപാഭിഹെ റിര ഹയാക്കൿ

ദർഘാഴ് റിര ഑യു കായണറലാരുൿ തിയിഹക നര്കുന്നതല്ല. ദർഘാഴ് യപാഭുകൾ പ്ലകഭാറ്റ്ൿ

ഹചയ്യാൻ ഩാെില്ല. ദർഘാഴിൽ ഩഹെെുക്കുന്നതിനാമി ` 1715 (ആമിയത്തി എെുനൂറ്റ്ി ഩതിനഞ്ചു

യൂഩാ ഭാപ്തൿ) EMD ആമി ഑െുയക്കണ്ടതാണ്. MSME ഹയജിഴ്യപ്െളൻ ഉഹണ്ടെിൽ, EMD

഑െുക്കന്നതിൽ നിന്നുൿ ഇളറ് യനെുന്നതിനാമി, ഭതിമാമ യയഖ വാജയായക്കണ്ടതാണ്. കൂെുതൽ

റിറയങ്ങൾ പ്ഩറർത്തി ദിറഴങ്ങളിൽ ഒപീഴുഭാമി ഫന്ധഹെട്ടാൽ അറിമാറുന്നതാണ്.

പ്ഩയതയക കായണൿ ഇല്ലാഹത തഹന്ന ദർഘാഴുകൾ ഩൂർണഭായമാ ബാഗികഭായമാ

നിയഴിക്കുന്നതിയനാ ഴവീകയിക്കുന്നതിയനാ ഉള്ള അധികായൿ ഡമറക്ടർ, ഐ.എ.എച്ച് &

റി.ഫിമിൽ നിക്ഷിഩ്തഭാമിയിക്കുൿ.

[NO. 13/2024-2025]

No. AHD/TVM/HVB/PALD/706/2024-B. 16th November 2024.

Sealed competitive tenders are invited for the supply of Chemicals as per the following

specification and requirement.

Estimated Approximate Cost—` 1,71,515.

EMD— 1% of the Estimated Cost.

10th December 2024

KERALA GAZETTE

919

____________________________________________________________________________________________________________________________

This is a digitally signed Gazette.

Authenticity may be verified through https://compose.kerala.gov.in/

LIST OF ITEMS

Sl.

No.

Name of article

Specification

Make and product

code no

Packing

Actual

Requirement

(1)

(2)

(3)

(4)

(5)

(6)

1 Acacia Gum

in Kg

1000 g

2 Acetone

500 ml

3 Agar Powder

Bacteriological

grade

Himedia GRM 026

500 g

4 Anaerobic Gas Pack 3.5 L

Himedia LE002A

Nos

5 ^{Buffer Solution PH 7 (Neutral}

pH Buffer)

Standard solution

for calibration

Thermo Scientific

ECBU7BT

500 ml

6 Buffer Solution PH 10

Standard solution

for calibration

Thermo Scientific

ECBU10BT

500 ml

7 Carbol Fuchsin staining solution Strong

125 ml

8 Cedar Wood Oil

Himedia GRM 9971

30 g

9 Crystal Violet Staining Solution

Himedia S 012

125 ml

10 Dextrose Anhydrous

500 g

11 ^{Disodium Hydrogen Ortho}

Phosphate anhydrous

500 g

12 Fluid Thioglycolate Medium

Himedia MAP 009

100 g

13 Formaldehyde

40%

formaldehyde AR

Grade

CDH 531140

500 ml

14 Gram's Iodine Solution

Himedia S 013

125 ml

15 Hydrochloric acid

30% ULTRA Pure

500 ml

16 Immersion oil for Microscopy

Sigma Life Science

56822

50 ml

17 ^{Isopropyl Alcohol (PROPAN}

-2 -OL)

AR Grade

NICE Chemicals

71537

2.5 liter

18 Lactophenol cotton blue

Himedia S 016

100 ml

Lanolin anhydrous (with

Melting Point 38-

44°C,Saponification value 90-

105, Acid value 1, Peroxide

value 20) LR

Loss on drying

0.5%, sulphated

ash 0.15 %

CDH Product no

033069

500 g

920

KERALA GAZETTE

Part III

____________________________________________________________________________________________________________________________

This is a digitally signed Gazette.

Authenticity may be verified through https://compose.kerala.gov.in/

20 Leishman’s Stain Solution

Himedia S018S

250 ml

21 Liquid Paraffin light

Himedia GRM 1310-

2.5Lwhite/semi-

transparent cans

2500 ml

188

22 Mercuric chloride

AR Grade

Himedia GRM 1383

100g

23 Mycological Agar

Himedia M 094

100 g

24 Peptone

Bacteriological

Himedia RM 001

500 g

25 ^{Potassium Dihydrogen}

Orthophosphate anhydrous

500 g

26 Potato Infusion Agar

Himedia M 174

500 g

27 Skim Milk Powder

Himedia M 530

500 g

28 Sodium Chloride

Himedia RM 853/

Merck/ Qualigens

500 g

29 ^{Sodium chloride}

Cell culture grade

Himedia TC 046-

500G

500 g

Sodium Dihydrogen

Orthophosphate dihydrate

(NaH2PO4.2H2O)

AR Grade

500 g

31 Sodium Hydroxide Pellets

Himedia RM 467

500 g

32 ^{Soyabean Casein Digest}

medium

Himedia M011

100g

33 Standard Nutrient Agar

Himedia M 877

500g

34 Standard Nutrient Broth

Himedia M 116

500 g

35 Trypsin from Bovine Pancreas

Minimum activity

0.2 Anson U/g

(2000 u/g)

Himedia RM 618

500g

Tween 80

(Polyoxyethylenesorbitan

monooleate

Polysorbate - 80

(1 ml = 1.08 g)

Himedia GRM 159-

550G

500 g

37 Xylene

AR Grade

500 ml

38 Yeast Extract Powder *

Himedia RM 027

500 g

The quoted chemicals should have at least two year shelf life at the time of supply;

otherwise the chemical shall be rejected at the time of receipt.

10th December 2024

KERALA GAZETTE

921

____________________________________________________________________________________________________________________________

This is a digitally signed Gazette.

Authenticity may be verified through https://compose.kerala.gov.in/

The tender should be superscribed "tender No. 13/2024-2025, Supply of Chemicals - 2024-

2025" and should be addressed to the "Director, Institute of Animal Health & Veterinary

Biologicals, Palode, Pacha P. O, Thiruvananthapuram, Kerala Pin-695 562". Last date for the

receipt of tender is 19-12-2024 12.00 noon. Late tender will not be accepted . The tender will be

opened at 3 pm on the same day in the presence of the tenderers or their authorised representatives

who may present at the time of opening of tender.

Intended tenderers may apply to the "Director, Institute of Animal Health &Veterinary

BIologicals, Palode, Pacha P. O., Thiruvananthapuram, Pin- 695 562" for obtaining the prescribed

tender form on which the tender should be submitted. Application for the tender form should be

accompanied by a cash remittance of ` 400 plus GST 18% which is the price fixed for a set of

tender form and it is not refundable. The tender forms are not transferable. Sale of tender form will

be closed at 3 pm on 18-12-2024. Cheque, postal stamp, Demand Draft etc. will not be accepted

towards the cost of tender form. The form will not be sent by V P P. Duplicate forms if required will

be available at ` 200 plus GST 18% extra per copy. The participating firm should present EMD of

` 1715 (Rupees One Thousand Seven Hundred and Fifteen Only). If the participating firm is

registered as MSME, relevant documents should be submitted for EMD exemption. Further details

if any can be sought from this office on all working days during office hours.

Institute of Animal Health and

(Sd.)

Veterinary Biologicals, Palode,

Director.

Thiruvananthapuram.

922

KERALA GAZETTE

Part III

____________________________________________________________________________________________________________________________

This is a digitally signed Gazette.

Authenticity may be verified through https://compose.kerala.gov.in/

C˛sS≠¿ ]ckyw

No. SWTDHO/1707/2024--˛C5.

2024 \hw-_¿ 22.

kwÿm\ Pe-K-Xm-KX hIp-∏v, Be-∏p-g-bn-te°v Xmsg ]dbp∂ km[-\-ßƒ kssπ

sNøp∂Xn\v ap{Z-sh® C-˛sS≠¿ £Wn-®psIm-≈p-∂p.

C-˛sS≠¿ \º¿—88/C5/2024˛25.

kssπ sNtø≠ hkvXp—MS Sheet.

AS-¶¬ XpI—` 15,00,000.

\nc-X-{Zhyw—` 15,000.

C˛sS≠¿ t^mans‚ hne—` 2,300+414 (Pn. Fk.v Sn. Dƒs∏sS).

C˛sS≠¿ t^mdw kzoI-cn-°p∂ Ah-km\ Xob-Xnbpw ka-bhpw—16˛12˛2024, 6 aWnhsc.

C˛sS≠¿ t^mdw Xpd-°p∂ Xob-Xnbpw ka-bhpw—21˛12˛2024, 11 aWn.

C˛sS≠¿ kw_-‘n®v IqSp-X¬ hnh-c-ßƒ {]hrØn Znh-k-ß-fn¬ sshIp-t∂cw

5 aWnhsc Cu Hm^o-kn¬ e`y-am-Wv. sSe-t^m¨ \º¿: 0477-˛2252015.

kwÿm\ Pe-K-Xm-KX hIp∏v Ub-d-IvS-td‰,v

(H∏v)

Be-∏pg.

Ub-d-IvS¿.

10th December 2024

KERALA GAZETTE

923

____________________________________________________________________________________________________________________________

This is a digitally signed Gazette.

Authenticity may be verified through https://compose.kerala.gov.in/

ഇ-ദര്‍ഘാസ് പരസയം

(1)

നമ്പര്‍ ADFW/8308/2024- TG II(2) (1) NS.

2024 നവംബര്‍ 26.

കേരള ഗവര്‍ണര്‍കുകവണ്ടി േൃഷി വേുപ്പ് നബാര്‍ഡ് RIDF XXIX പദ്ധതിയിൽ താഴെ

പറയുന്ന ോര്‍ഷിേ പമ്പ് ഴസറ്റുേളും അനുബന്ധ ഘടേങ്ങളും കോട്ടയം ജില്ലയിഴെ കോട്ടയം,

േടുത്തുരുത്തി, ഉെവൂര്‍, ഏറ്റുമാനൂര്‍ കലാകുേളിഴെ 8 ഗ്ഗാമ പഞ്ചായത്തുേളിഴെ േുട്ടനാടന്‍

ഴനൽവയെുേളിഴെ ജെനിര്‍ഗമനത്തിനായി സ്ഥാപിച്ച് ഗ്പവര്‍ത്തന സജ്ജമാകി കേമാറുന്നതിന്

ോര്‍ഷിേ

പമ്പ്

ഴസറ്റ്

നിര്‍മാതാകള്‍/അംഗീേൃത

ഡീെര്‍മാര്‍/അംഗീേൃത

വിതരണകാര്‍

എന്നിവരിൽ നിന്നും മത്സര സവഭാവമുള്ള ദര്‍ഘാസുേള്‍ (2 േവര്‍ സംവിധാനത്തിൽ) ഇ - ദര്‍ഘാസ്

മുകേന ക്ഷണിച്ചു ഴോള്ളുന്നു.

ഇ-ദര്‍ഘാസ് നമ്പര്‍— 2024_AGRI_707450_1.

സാധന സാമഗ്ഗിേളുഴട കപരും എണവും— സബ്കമെ്സിബിള്‍ ഴവര്‍ട്ടികൽ ആേ്സിയൽ കലാ

പമ്പ് ഴസറ്റ് - 11 എണം

നിരതഗ്ദവയം—` 2,38,500.

ദര്‍ഘാസ് ക ാറത്തിഴെ വിെ— ` 47,700 + ` 8,586 (GST @18%).

ഇ- ദര്‍ഘാസ് ഗ്പസിദ്ധീേരികുന്ന തീയതിയും സമയവും— 26-11-2024, 6 മണി.

ഇ- ദര്‍ഘാസ് സവീേരികുന്ന അവസാന തീയതിയും സമയവും—30-12-2024, 3.00 മണി.

ഇ -ദര്‍ഘാസ് തുറകുന്ന തീയതിയും സമയവും— 31-12-2024 , 11.00 മണി.

ദര്‍ഘാസ്

കഡാേയുഴമെ്

ീസും

നിരതഗ്ദവയവും

SBI–യുഴട

NEFT

കപയ്ഴമെ്

സിസ്റ്റത്തിെൂഴട ഓണ്‍കെനായി അടയ്കകണ്ടതാണ്. മുേളിൽ പറഞ്ഞിരികുന്ന പമ്പ് ഴസറ്റിഴെ

സാകേതിേവും സാമ്പത്തിേവുമായ വിവരങ്ങള്‍ ഴവകേഴറ േവറുേളിൽ നൽകേണ്ടതാണ്.

ഗ്പിെിമിനറി എഗ്ഗിഴമെ്, ഴടണ്ടര്‍ ക ാറങ്ങള്‍ സമര്‍പ്പിച്ചതിഴെ രസീത്, KFC–14, ദര്‍ഘാസ്

ക ാറത്തിൽ ആവശ്യഴപ്പട്ടിരികുന്ന മറ്റ് കരേേളുഴട സാക്ഷയഴപ്പടുത്തിയ പേര്‍പ്പുേള്‍ എന്നിവ

ഴടണ്ടര്‍ തുറകുന്നതിന് തീരുമാനിച്ചിരികുന്ന സമയത്തിനു മുമ്പ് ആയി േിട്ടത്തകവിധം കസ്റ്ററ്റ്

അഗ്ഗിേള്‍ച്ചറൽ എഞ്ചിനീയര്‍, ോര്‍ഷിേ വിേസന േര്‍ഷേ കക്ഷമ വേുപ്പ് ഡയറക്ടറുഴട

ോരയാെയം, വിോസ്ഭവന്‍, തിരുവനന്തപുരം- 695 033 എന്ന വിൊസത്തിൽ രജികസ്റ്റര്‍ഡ് / സ്പീഡ്

തപാൽ മുകേന അയയ്കകണ്ടതാണ്. തപാെിൽ ഉണ്ടാേുന്ന ോെതാമസത്തിന് ഈ ഓ ീസ്

ഉത്തരവാദി ആയിരികുന്നതല്ല.

നിബന്ധനേള്‍

(1) ദര്‍ഘാസിഴന സംബന്ധികുന്ന വിശ്ദാംശ്ങ്ങള്‍ കേരള സര്‍കാരിഴെ ഔകദയാഗിേ ഴടണ്ടര്‍

ഴവബ് കസറ്റായ https://etenders.kerala.gov.in - ൽ നിന്നും െഭികുന്നതാണ്.

(2) ഴടണ്ടര്‍ ക ാറവും മറ്റ് കരേേളും സാധുവായ ഡിജിറ്റൽ സികേച്ചറിൽ ഒപ്പു ഴവച്ച് സര്‍കാരിഴെ

ഔകദയാഗിേ ഴടണ്ടര്‍ ഴവബ് കസറ്റായ https://etenders.kerala.gov.in-ൽ േൂടി സമര്‍പ്പികകണ്ടതാണ്.

(3) ഔകദയാഗിേ ഴവബ് കപാര്‍ട്ടെിൽ ഈ ദര്‍ഘാസിഴനപ്പറ്റി പറഞ്ഞിരികുന്ന മാതൃേയിെുള്ള BOQ

ക ാം മാഗ്തകമ ദര്‍ഘാസ് നടപടിേള്‍കായി ഉപകയാഗികുവാന്‍ പാടുള്ളൂ. അല്ലാത്തപക്ഷം

ദര്‍ഘാസ് നിരസികുന്നതായിരികും.

(4) നിരതഗ്ദവയം, ദര്‍ഘാസ് ീസ് എന്നിവ ഓണ്‍കെന്‍ വെി മാഗ്തകമ അടയ്കുവാന്‍ പാടുള്ളൂ.

(5) ദര്‍ഘാസ് സമര്‍പ്പികുന്നവര്‍ ` 200-ഴെ മുഗ്ദപഗ്തത്തിൽ കേരള സര്‍കാരിഴെ നിയമാവെി

അനുസരിച്ചുള്ള ഗ്പാഥമിേ േരാര്‍ ഉടമ്പടി േൂടി നൽകേണ്ടതാണ്. ഗ്പാഥമിേ േരാര്‍ ഉടമ്പടിയുഴട

മാതൃേ ദര്‍ഘാസ് പരസയകത്താഴടാപ്പം െഭയമാണ്.

924

KERALA GAZETTE

Part III

____________________________________________________________________________________________________________________________

This is a digitally signed Gazette.

Authenticity may be verified through https://compose.kerala.gov.in/

(6) ദര്‍ഘാസിൽ പരസയഴപ്പടുത്തിയിരികുന്ന തീയതിയിൽ നിശ്ചിത സമയത്ത് ദര്‍ഘാസുേള്‍

ഓണ്‍കെനായി https://etenders.kerala.gov.in എന്ന ഴവബ്കസറ്റിൽ തുറകുന്നതായിരികും.

(7) ഴടണ്ടര്‍ െഭിച്ച വയക്തി സകൈ ഓര്‍ഡറിൽ പറഞ്ഞിരികുന്ന ദിവസത്തികൊ അതിനുമുകമ്പാ

പമ്പ്ഴസറ്റും, അനുബന്ധ ഘടേങ്ങളും സകൈ ഴെയ്ത് സ്ഥാപിച്ച് ഗ്പവര്‍ത്തന സജ്ജമാകി

കേമാകറണ്ടതാണ്.

(8) ഓണ്‍കെന്‍

വെി

ഴടണ്ടര്‍

സമര്‍പ്പികുന്നതിൽ

എഴന്തേിെും

ോെതാമസകമാ

മറ്റ്

ഗ്പശ്്നങ്ങകളാ ഉഴണ്ടേിൽ ആയതിന് ഴടണ്ടര്‍ ക്ഷണികുന്ന സ്ഥാപനം ഉത്തരവാദി

ആയിരികുന്നതല്ല.

(9) ഈ നിബന്ധനേള്‍ക് പുറഴമ കേരള സര്‍കാരിഴെ കസ്റ്റാര്‍ പര്‍കച്ചസ് മാനവെിൽ

ഗ്പതിപാദിച്ചിരികുന്ന എല്ലാ നിബന്ധനേളും ഈ ദര്‍ഘാസിനും ബാധേമാണ്.

No. ADFW/8308/2024-TG II (2) (1) NS.

26th November 2024.

Notice inviting E-tender for the supply, installation, trial run and commissioning of Submersible

Vertical Axial Flow pumpsets under the project NABARD RIDF XXIX - Replacing of petty and para

indigenous technology with energy efficient pumpsets for dewatering Kuttanad paddy fields in 8 Grama

Panchayaths of Kottayam, Kaduthuruthy, Uzhavoor, Ettumanoor blocks in Kottayam District of Kerala

with prime mover, delivery line, panel board and all other accessories.

EMD (online payment) — ` 2,38,500.

E-tender ID— 2024_AGRI_707450_1.

On behalf of Governor of Kerala E-tender in two cover system is invited from

manufactures or their authorized dealers or authorized distributors or authorized suppliers for

the supply, installation, trial run and commissioning of Submersible Axial Flow Pumpsets and

all other accessories with the following specifications, by the Director of Agriculture,

Thiruvananthapuram.

Supply, installation, testing, trial run and commissioning of Submersible Vertical Axial

Flow Pumpset for various Padashekaram of Kottayam District with the specifications listed

below:-

Suitable for handling silty, fresh and salty water with rpm 960 (Syn) or less. The material

of construction of the casing, suction bell shall be CIFG 260 with 2% NiCl, impeller CF8M

(SS) with SS 316 shaft, vertical submerged column pipe should be of SS 304 and horizontal

delivery pipe (varies from 4 to 10 m length as per site conditions) of SS 304 with 6 mm

minimum thickness. A metallic non-corrosive strainer of mesh size not more than

50 mm x 50 mm should be fitted at mouth of suction column. Any hanging portion of the

delivery pipe should be supported with suitable metallic supporting frames or RCC pillars of

suitable size as per site requirements. The prime mover for the pump should be 3 phase Totally

Enclosed Water-Cooled squirrel cage submersible induction motor of reputed make operating

at 415V+/- 10%, 50Hz+/-5%, connection with "F" class insulation, control panel must have

dust and vermin proof vertical mounted cubical type panel board with FCMA soft starter of

reputed make, MCCB including phase failure protection, surge protection devise, dry run

protection, overload over current protection, thermal over load protection relay, earth fault relay,

voltmeter, ammeter, fault indication start and stop switches, power factor correction capacitor,

LED indicator, selector switch, wiring and earthing should be as per regulations and

specifications of KSEB and Electrical Inspectorate.

10th December 2024

KERALA GAZETTE

925

____________________________________________________________________________________________________________________________

This is a digitally signed Gazette.

Authenticity may be verified through https://compose.kerala.gov.in/

Separate cubical type energy meter panel with CT metering provision including 4 Pole

FN type isolator, HRC fuse carrier, RCCB, HRC fuses and required water proof copper cable

for connection from electric post to meter box and meter panel to motor control panel etc. with

proper earthing and cable termination should be as per the regulations and specifications of

KSEB and Electrical Inspectorate standards.

A screen with 6 mm GI welded mesh with 50 mm x 50 mm opening size, (about 20 sq.m

area) framed in GI angles and GI tubes shall be fitted at the opening on top and sides of sump

to prevent entry of unwanted materials to the pump through inflow water.

Rate quoted should be inclusive of all the charges for supply, installation including trial

run and commissioning, all types of transportation and conveyance, loading and unloading

charges, charges for factory testing, but excluding GST etc.

Sl.

No.

Duty

point

head

(m)

Minimum

discharge at

duty point

head (lps)

Working head

range (m)

Minimum

overall

efficiency

(%) at duty

point head

Available

connected

load (hp)

Quantity

(No.)

750

1 to 4.5

800

1 to 4.5

400

1 to 4.5

250

1 to 4.5

550

1 to 4.5

In accordance with respective specification as shown in the tender documents, the tender

is to be submitted as e-tenders through https://etenders.kerala.gov.in. Since this is an online

process only those bidders who have enrolled in the above portal with their own Digital

Signature Certificate (DSC) can participate in the tender. e-tender document and other details

can be obtained from the above portal. Details of locations of proposed installation and power

availability at sites are appended.

Tender Fee (online payment + GST payment) — ` 47,700 + ` 8,586 (18% GST paid directly to

GST Department)

Document sale start date and time—26-11-2024, 6 p. m.

Bid Submission start date and time— 29-11-2024, 6 p. m.

Last date and time of receipt of e-tender— 30-12-2024, 3 p. m.

Date and time of opening of technical bid— 31-12-2024, 11 a. m.

Date upto which the rate is to remain firm for acceptance— 120 days.

Performance Security— 5% of quoted amount.

Period of completion—12 months.

Bidders shall remit the tender document fee and EMD using the online payment option

of e-procurement system. GST for tender fee (` 8,586) should be paid separately and the Chelan

must be uploaded with the bid document.

Scanned copy of the preliminary agreement in the prescribed format in Kerala Stamp

paper worth ` 200 should be submitted online and original to the undersigned before the

opening of e-tender. The rate should be quoted in Indian Currency only. The rules and regulation

926

KERALA GAZETTE

Part III

____________________________________________________________________________________________________________________________

This is a digitally signed Gazette.

Authenticity may be verified through https://compose.kerala.gov.in/

prescribed for e- tenders by the Govt. of Kerala shall be applicable to this e-tender also. Tenders

will be opened online in the presence of such bidders or their authorized representatives who

have logged in at the prescribed time of opening. If the date fixed for opening happens to be a

holiday or due to net failure the tenders will be opened in the next working day at the same

time.

In the bid, the following documents should be submitted by online.

(1) BOQ duly filled uploaded in the e-tender portal.

(2) Technical data sheet duly filled and signed (Annexure I). Use separate data sheet for each

items quoted.

(3) If any more information to be furnished.

(4) Scanned copy of performance curve.

(5) Schedule of rates for spare parts and service charges for seven years after the warranty

period.

(6) Details of AMC for seven years after the warranty period.

(7) e-payment form duly filled and signed.

(8) Proof of original manufacturer/authorized dealers/distributor/supplier (copy of

authorization letter).

(9) Scanned copy of preliminary agreement executed in Kerala Stamp Paper worth ` 200.

(10) EMD exemption certificate (if any) should be submitted online.

(11) Form No.14 duly filled and signed.

(12) Tender notice and Special condition of tender duly signed.

(13) Experience Certificates.

(14) Proof of payment of GST amount of tender fee.

GENERAL REQUIREMENTS

(1) The efficiency of the pumping unit supplied shall be as high as practicable, consistent with

the best modern design.

(2) The pump set shall be capable of operating in open conditions in the range without being

overloaded at any point with a margin of at least 10% of power in the motor pump set over

entire operating range.

(3) The pump set characteristics shall be of stable nature such that the efficiency is fairly steady

for the water level variations. The maximum efficiency point will be nearer to the duty point

and fairly constant for larger range on either side. The pump sets should run smoothly over

the entire operating range without cavitations and vibration. The variation in the efficiencies

for any point of operation in the entire operating range should be minimum.

(4) The pump set shall be suitable for pumping of raw/brackish/saline water containing silt,

coarse sand and gravel/suspended solids up to 50 mm size.

(5) The pump set shall be suitable for non-stop continuous 24 hours operation without

interruption.

(6) The pump set shall be Axial Flow type with fixed blade angle according to the type used. The

pump sets shall be comprised of suction bell mouth pump casing, impeller and motor on

single common shaft, long life anti friction bearing (drive and non driving end) oil chamber

with mechanical seals etc.

10th December 2024

KERALA GAZETTE

927

____________________________________________________________________________________________________________________________

This is a digitally signed Gazette.

Authenticity may be verified through https://compose.kerala.gov.in/

(7) The supplier shall furnish the following documents

(a) Final constructional drawings of the pump set.

(b) Operation, maintenance and spare parts manual for pump set.

(d) Material of casting certificate for pump components

(8) The pump set manufacturer has to declare the performance parameters separately as

Guaranteed Performance Parameters. These shall include discharge, pump set efficiency and

overall efficiency.

(9) The manufacturer has to provide technical data as given in Annexure - I, declaration of the

product offered, for the product they have quoted.

(10) Bidders are permitted to submit only one make and model for each item. Quoting more than

one make and model for a single item will result in the rejection of the technical bid.

SPECIAL CONDITIONS

(1) The firm must have a minimum of two years of experience in similar types of work.

(2) The basic rate quoted should be inclusive of all charges for supply, installation, trial run,

commissioning, transportation, handling charge, etc., but excluding GST. Prevailing GST

rate at the time of procurement will be applicable separately.

(3) The firm has to supply the items at the location specified or as per direction from the

undersigned.

(4) The successful bidder will be bound to supply the items as per the requirement of the Tender

Inviting Authority (TIA).

(5) The bidders can quote, for all/any/some of the items as per their choice, but the cost of tender

form and EMD remains the same.

(6) Bidder has to pay the GST portion of tender fee directly to GST Department and upload the

chelan in the portal and also submit along with the hard copy of tender documents.

(7) The bidder should specify the Make and Model of pump set quoted.

(8) The bidder must provide authorization letter (manufacture/dealer/distributor/ supplier) from

the manufacturer.

(9) The supplier should confirm the repair and service facilities, availability of spare parts etc.

of the items supplied for a minimum period of 10 years. The selected bidder should attend

the pump set and rectify the trouble within 48 hours in case of registration of complaints.

(10) Schedules of rates for spare parts and services should be submitted along with the bid

documents.

(11) Training programmes in operation and minor repair should be arranged for selected pump

operators and Padasekhara samithi members (three times the number of pump sets supplied)

and training programme on repair and maintenance should be arranged for selected technical

persons (number equal to the number of pump sets supplied) by the supplier at their own cost.

(12) All pump set shall be subjected to performance test as per IS 9137 at manufacturer's work

for different head, discharge and efficiency in presence of tender inviting authority or

authorized persons.

928

KERALA GAZETTE

Part III

____________________________________________________________________________________________________________________________

This is a digitally signed Gazette.

Authenticity may be verified through https://compose.kerala.gov.in/

(13) The Tender Inviting Authority reserves the right to order full quantity of supply to any one

bidder or distribute the supply to different bidders as per decision of the technical committee

constituted for the purpose.

(14) The successful bidder will have to execute an agreement in Kerala Stamp Paper worth ` 200

in prescribed form and manner and to furnish the required security amount @ 5% of total

quoted amount within 14 days of the receipt of selection notice. The security deposit will be

disbursed within 28 days after the successful completion of the Defect Liability Period of

three years.

(15) Tenders, incomplete in any respect, will be summarily rejected and the decision of the TIA

will be final.

(16) The supply, installation, testing, trial run and commissioning should be completed within 12

months on receipt of the supply order.

(17) Satisfactory completion certification should submit for each installation from Electrical

Inspectorate.

(18) Bidders should be prepared to do necessary civil construction works associated with the

installation, if any required, within the quoted amount.

(19) Bidders are advised to visit the location of proposed installations, before quoting.

(20) The payment shall be released only after satisfying the quantity, quality and specifications

of the items supplied and successful commissioning and trail run of the item supplied by the

bidder and inspection of the technical committee constituted for the same.

(21) A minimum warranty period of three years is to be assured for all the items supplied and the

details of AMC, thereafter, for period of seven year should be mentioned along with the

tender documents.

(22) All Annexure should be duly filled and uploaded with the tender.

(23) Any legal disputes that may arise in relation to the e-tender formalities will be restricted to

the jurisdiction of Thiruvananthapuram District Court.

Communications to be addressed to:— Director of Agriculture,

Agriculture Development and Farmers Welfare Department,

Vikas Bhavan, Thiruvananthapuram,

Kerala PIN-695 033.

[email protected]

(2)

നമ്പര്‍ ADFW/8308/2024-TG II(2) (2) NS.

2024 നവംബര്‍ 26.

കേരള ഗവര്‍ണര്‍കു കവണ്ടി േൃഷി വേുപ്പ് നബാര്‍ഡ് RIDF XXIX പദ്ധതിയിൽ താഴെ

ോര്‍ഷിേ പമ്പ് ഴസറ്റ് നിര്‍മാതാകള്‍ / അംഗീേൃത ഡീെര്‍മാര്‍/ അംഗീേൃത വിതരണകാര്‍

മുകേന ക്ഷണിച്ചു ഴോള്ളുന്നു.

ഇ-ദര്‍ഘാസ് നമ്പര്‍— 2024_ AGRI_707451_1.

സാധന സാമഗ്ഗിേളുഴട കപരും എണവും— ഴവര്‍ട്ടികൽ ആേ്സിയൽ കലാ പമ്പ് ഴസറ്റ് - 10 എണം

10th December 2024

KERALA GAZETTE

929

____________________________________________________________________________________________________________________________

This is a digitally signed Gazette.

Authenticity may be verified through https://compose.kerala.gov.in/

ദര്‍ഘാസ് ക ാറത്തിഴെ വിെ— ` 35,900+ ` 6,462 (GST @18%).

നിരതഗ്ദവയം— ` 1,79,500.

ഇ- ദര്‍ഘാസ് ഗ്പസിദ്ധീേരികുന്ന തീയതിയും സമയവും— 26-11-2024, 6 മണി.

ഇ- ദര്‍ഘാസ് സവീേരികുന്ന അവസാന തീയതിയും സമയവും— 30-12-2024, 3 മണി.

ഇ -ദര്‍ഘാസ് തുറകുന്ന തീയതിയും സമയവും— 31-12-2024, 11 മണി.

ദര്‍ഘാസ് കഡാേയുഴമെ് ീസും നിരതഗ്ദവയവും SBI–യുഴട NEFT കപയ്ഴമെ് സിസ്റ്റത്തിെൂഴട

ഓണ്‍കെനായി അടയ്കകണ്ടതാണ്. മുേളിൽ പറഞ്ഞിരികുന്ന പമ്പ് ഴസറ്റിഴെ സാകേതിേവും

സാമ്പത്തിേവുമായ വിവരങ്ങള്‍ ഴവകേഴറ േവറുേളിൽ നൽകേണ്ടതാണ്. ഗ്പിെിമിനറി എഗ്ഗിഴമെ്,

ഴടണ്ടര്‍

ക ാറങ്ങള്‍

സമര്‍പ്പിച്ചതിഴെ

രസീത്,

KFC–14,

ദര്‍ഘാസ്

ക ാറത്തിൽ

ആവശ്യഴപ്പട്ടിരികുന്ന മറ്റ് കരേേളുഴട സാക്ഷയഴപ്പടുത്തിയ പേര്‍പ്പുേള്‍ എന്നിവ ഴടണ്ടര്‍

തുറകുന്നതിന്

തീരുമാനിച്ചിരികുന്ന

സമയത്തിന്

മുമ്പ ായി

േിട്ടത്തകവിധം

കസ്റ്ററ്റ്

തപാൽ മുകേന അയയ്കകണ്ടതാണ്. തപാെിൽ ഉണ്ടാേുന്ന ോെതാമസത്തിന് ഈ ഓ ീസ്

ഉത്തരവാദി ആയിരികുന്നതല്ല.

നിബന്ധനേള്‍

ഴവബ്കസറ്റായ https://etenders.kerala.gov.in–ൽ നിന്നും െഭികുന്നതാണ്.

ഔകദയാഗിേ ഴടണ്ടര്‍ ഴവബ്കസറ്റായ https://etenders.kerala.gov.in-ൽ േൂടി സമര്‍പ്പികകണ്ടതാണ്.

ദര്‍ഘാസ് നിരസികുന്നതായിരികും.

മാതൃേ ദര്‍ഘാസ് പരസയകത്താഴടാപ്പം െഭയമാണ്.

ഓണ്‍കെനായി https://etenders.kerala.gov.in എന്ന ഴവബ്കസറ്റിൽ തുറകുന്നതായിരികും.

കേമാകറണ്ടതാണ്.

(8) ഓണ്‍കെന്‍ വെി ഴടണ്ടര്‍ സമര്‍പ്പികുന്നതിൽ എഴന്തേിെും ോെതാമസകമാ മറ്റ് ഗ്പശ്്നങ്ങകളാ

ഉഴണ്ടേിൽ ആയതിന് ഴടണ്ടര്‍ ക്ഷണികുന്ന സ്ഥാപനം ഉത്തരവാദി ആയിരികുന്നതല്ല.

(9) ഈ

നിബന്ധനേള്‍ക്

പുറഴമ

കേരള

സര്‍കാരിഴെ

കസ്റ്റാര്‍

പര്‍കച്ചസ്

മാനവെിൽ

ഗ്പതിപാദിച്ചിരികുന്ന എല്ലാ നിബന്ധനേളും ഈ ദര്‍ഘാസിനും ബാധേമാണ്.

No. ADFW/8308/2024-TG- II (2) (2) NS.

26th November 2024.

Notice inviting e-tender for the supply, installation, trial run and commissioning of Vertical

Axial Flow Pump Sets under the project NABARD RIDF XXIX - Replacing of petty and para

indigenous technology with energy efficient pumpsets for dewatering Kuttanad paddy fields in 8 Grama

Panchayaths of Kottayam, Kaduthuruthy, Uzhavoor, Ettumanoor Blocks in Kottayam District of Kerala

with prime mover, delivery line, panel board and all other accessories.

e-tender ID — 2024_AGRI_707451_1.

930

KERALA GAZETTE

Part III

____________________________________________________________________________________________________________________________

This is a digitally signed Gazette.

Authenticity may be verified through https://compose.kerala.gov.in/

On behalf of Governor of Kerala e-tender in two cover system is invited from manufacturers

or their authorized dealers or authorized distributors or authorized supplier for the supply, installation,

trial run and commissioning of submersible axial flow pump sets and all other accessories with the

following specification, by the Director of Agriculture, Thiruvananthapuram.

Supply erection, testing and commissioning of Vertical Axial Flow pump set for various

padashekaram of Kottayam District with the specifications listed below:

Suitable for handling saline and silty water with rpm 960 (Syn) or less. The material of

construction of flange, suction bell, bowl, shroud shall be CI with 2% Nickel, impeller, shaft, shaft

sleeve, fastener and suction pipe shall be of SS 304. Delivery pipe should be in SS 304 with minimum

thickness 6 mm and of suitable length (varies from 2-10 m) or as per site condition. The prime mover

of the pump is to be 3 phase TEFC squirrel cage induction motor of reputed make operating at 415V +/-

10%, 50 Hz +/- 5% connection with F class insulation, control panel must have dust and vermin proof

vertical mounted cubical type panel board with FCMA soft starter of reputed make, MCCB including

phase failure protection, surge protection devise, dry run protection, overload over current protection,

thermal over load protection relay, earth fault relay, voltmeter, ammeter, fault indication start and stop

switches, power factor correction capacitor, LED indicator, selector switch, wiring and earthing should

be as per regulations and specifications of KSEB and Electrical Inspectorate.

Separate cubical type energy meter panel with CT metering provision including 4 Pole FN type

isolator, HRC fuse carrier, RCCB, HRC fuses and required water proof copper cable for connection

from electric post to meter box and meter panel to motor control panel etc. with proper earthing and

cable termination should be as per the regulations and specifications of KSEB and Electrical

Inspectorate standards.

A screen with 6mm GI welded mesh with 50mm x 50mm opening size (about 20 sq.m. area)

framed in GI angles and GI tubes fitted at the opening on top and sides of sump to prevent entry of

unwanted materials to the pump through inflow water. Proper I-section should be provided for

supporting the motor mountings and pedestal. Suitable chain block and tripod facilities to be provided

for lifting the motor at least 1.00 m above maximum flood level.

Rate quoted should be inclusive of all the charges for supply, installation including trial run and

commissioning, all types of transportation and conveyance, loading and unloading charges, charges for

factory testing, but excluding GST etc.

Sl.

No.

Duty

Point

Head

(m)

Minimum

Discharge at

Duty Point

Head (lps)

Working Head

Range (m)

Minimum

Overall

Efficiency (%) at

Duty Point Head

Available

Connected

Load (hp)

Quantity

(No.)

300

0.75 – 3.5

200

0.75 – 3.5

600

0.75 – 3.5

150

0.75 – 3.5

400

0.75 – 3.5

In accordance with respective specification as shown in the tender documents, the tender is to

be submitted as e-tenders through https://etenders.kerala.gov.in. Since this is an online process only

those bidders who have enrolled in the above portal with their own Digital Signature Certificate (DSC)

can participate in the tender. E tender document and other details can be obtained from the above portal.

Details of locations of proposed installation and power availability at sites are appended.

10th December 2024

KERALA GAZETTE

931

____________________________________________________________________________________________________________________________

This is a digitally signed Gazette.

Authenticity may be verified through https://compose.kerala.gov.in/

EMD (online payment)— ` 1,79,500.

Tender Fee (online payment + GST payment)— ` 35,900 + ` 6,462 (18% GST paid directly to GST

Department)

Document sale start date and time— 26-11-2024, 6 p. m.

Bid Submission start date and time— 29-11-2024, 6 p. m.

Last date and time of receipt of e-tender— 30-12-2024, 3 p. m.

Date and time of opening of technical bid— 31-12-2024, 11 a. m.

Date upto which the rate is to remain firm for acceptance—120 days

Performance Security— 5% of quoted amount.

Period of completion— 12 months.

Bidders shall remit the tender document fee and EMD using the online payment option of

e-procurement system. GST for tender fee (` 6,462) should be paid separately and the Chelan must be

uploaded with the bid document.

Scanned copy of the preliminary agreement in the prescribed format in Kerala Stamp paper

worth ` 200 should be submitted online and original to the undersigned before the opening of e-tender.

The rate should be quoted in Indian Currency only. The rules and regulation prescribed for e- tenders by

the Govt. of Kerala shall be applicable to this e-tender also.

Tenders will be opened online in the presence of such bidders or their authorized representatives

who have logged in at the prescribed time of opening. If the date fixed for opening happens to be a

holiday or due to net failure the tenders will be opened in the next working day at the same time.

In the bid, the following documents should be submitted by online.

(1) BOQ duly filled uploaded in the e tender portal.

(2) Technical data sheet duly filled up and signed (Annexure I). Use separate data sheet each item

quoted.

(3) If any more information to be furnished.

(4) Scanned copy of performance curve.

(5) Schedule of rates for spare parts and service charges for seven years after the warranty period.

(6) Details of AMC for seven years after the warranty period.

(7) E-payment form duly filled and signed.

(8) Proof of original manufacturer/authorized dealers/distributor/supplier (copy of authorization

letter).

(9) Scanned copy of preliminary agreement executed in Kerala Stamp Paper worth ` 200.

(10) EMD exemption certificate (if any) should be submitted online.

(11) Form No.14 duly filled and signed.

(12) Tender Notice and Special condition of tender duly signed.

(13) Experience Certificates.

(14) Proof of payment of GST amount of tender fee.

GENERAL REQUIREMENTS

(1) The efficiency of the pumping unit supplied shall be as high as practicable, consistent with the best

modern design.

932

KERALA GAZETTE

Part III

____________________________________________________________________________________________________________________________

This is a digitally signed Gazette.

Authenticity may be verified through https://compose.kerala.gov.in/

(2) The pump set shall be capable of operating in open conditions in the range without being overloaded

at any point with a margin of at least 10% of power in the motor pump set over entire operating

range.

(3) The pump set characteristics shall be of stable nature such that the efficiency is fairly steady for the

water level variations. The maximum efficiency point will be nearer to the duty point and fairly

constant for larger range on either side. The pump sets should run smoothly over the entire operating

range without cavitations and vibration. The variation in the efficiencies for any point of operation

in the entire operating range should be minimum.

(4) The pump set shall be suitable for pumping of raw/brackish/saline water containing silt, coarse sand

and gravel/suspended solids up to 50 mm size.

(5) The pump set shall be suitable for non-stop continuous 24 hours operation without interruption.

(6) The pump set shall be Axial Flow type with fixed blade angle according to the type used. The pump

sets shall be comprised of suction bell mouth pump casing, impeller and motor on single common

shaft, long life anti friction bearing (drive and non driving end) oil chamber with mechanical seals

etc.

(7) The supplier shall furnish the following documents

(a) Final constructional drawings of the pump set.

(b) Operation, maintenance and spare parts manual for pump set.

(d) Material of casting certificate for pump components.

(8) The pump set manufacturer has to declare the performance parameters separately as Guaranteed

Performance Parameters. These shall include discharge, pump set efficiency and overall efficiency.

(9) The manufacturer has to provide technical data as given in Annexure - I declaration of the product

offered for the product they have quoted.

(10) Bidders are permitted to submit only one make and model for each item. Quoting more than one

make and model for a single item will result in the rejection of the technical bid.

SPECIAL CONDITIONS

(1) The firm must have a minimum of two years of experience in similar types of work.

(2) The basic rate quoted should be inclusive of all charges for supply, installation, trial run,

commissioning, transportation, handling charge, etc., but excluding GST. Prevailing GST rate at the

time of procurement will be applicable separately.

(3) The firm has to supply the items at the location specified or as per direction from the undersigned.

(4) The successful bidder will be bound to supply the items as per the requirement of the Tender Inviting

Authority (TIA).

(5) The bidders can quote, for all / any/some of the items as per their choice, but the cost of tender form

and EMD remains the same.

(6) Bidder has to pay the GST portion of tender fee directly to GST Department and upload the Chelan

in the portal and also submit along with the hardcopy of tender documents.

(7) The bidder should specify the Make and Model of pump set quoted.

(8) The bidder must provide authorization letter (manufacture/dealer/distributor/supplier) from the

manufacturer.

10th December 2024

KERALA GAZETTE

933

____________________________________________________________________________________________________________________________

This is a digitally signed Gazette.

Authenticity may be verified through https://compose.kerala.gov.in/

(9) The supplier should confirm the repair and service facilities, availability of spare parts etc. of the

items supplied for a minimum period of 10 years. The selected bidder should attend the pump set

and rectify the trouble within 48 hours in case of registration of complaints.

(10) Schedules of rates for spare parts and services should be submitted along with the bid documents.

(11) Training programmes in operation and minor repair should be arranged for selected pump operators

and Padasekhara Samithi members (three times the number of pump sets supplied) and training

programme on repair and maintenance should be arranged for selected technical persons (number

equal to the number of pump sets supplied) by the supplier at their own cost.

(12) All pump set shall be subjected to performance test as per IS 9137 at manufacturer's work for

different head, discharge and efficiency in presence of tender inviting authority or authorized persons.

(13) The Tender Inviting Authority reserves the right to order full quantity of supply to any one bidder or

distribute the supply to different bidders as per decision of the technical committee constituted for

the purpose.

(14) The successful bidder will have to execute an agreement in Kerala Stamp Paper worth ` 200 in

prescribed form and manner and to furnish the required security amount @ 5% of total quoted amount

within 14 days of the receipt of selection notice. The security deposit will be disbursed within 28

days after the successful completion of the Defect Liability Period of three years.

(15) Tenders, incomplete in any respect, will be summarily rejected and the decision of the TIA will be

final.

(16) The supply, installation, testing, trial run and commissioning should be completed within 12 months

on receipt of the supply order.

(17) Satisfactory completion certification should submit for each installation from Electrical Inspectorate.

(18) Bidders should be prepared to do necessary civil construction works associated with the installation,

if any required, within the quoted amount.

(19) Bidders are advised to visit the location of proposed installations, before quoting.

(20) The payment shall be released only after satisfying the quantity, quality and specifications of the

items supplied and successful commissioning and trail run of the item supplied by the bidder and

inspection of the technical committee constituted for the same.

(21) A minimum warranty period of three years is to be assured for the items supplied and the details of

AMC, thereafter, for period of seven year should be mentioned along with the tender documents.

(22) All Annexure should be duly filled and uploaded with the tender.

(23) Any legal disputes that may arise in relation to the e-tender formalities will be restricted to the

jurisdiction of Thiruvananthapuram District Court.

Communications to be addressed to:— Director of Agriculture,

Agriculture Development and Farmers

Welfare Department, Vikas Bhavan,

Thiruvananthapuram, Kerala, PIN-695 033.

[email protected].

Directorate of Agriculture Development and Farmers’

(Sd.)

Welfare Department, Thiruvananthapuram.

Additional Director of Agriculture (CP).

934

KERALA GAZETTE

Part III

____________________________________________________________________________________________________________________________

This is a digitally signed Gazette.

Authenticity may be verified through https://compose.kerala.gov.in/

sS≠¿ ]ckyw

\º¿ SWTDHO/1741/2024˛C5.

2024 \hw-_¿ 22.

kwÿm\ PeKXmKX hIp∏v Be-∏p-gbnte°v Xmsg ]d-bp∂ km[-\-ßƒ kssπ

sNøp-∂-Xn\v ap{Z-sh® sS≠¿ £Wn-®psIm-≈p-∂p.

sS≠¿ \º¿—90/C5/2023˛24.

kssπ sNtø≠ hkvXp—Stern Tube.

AS-¶¬ XpI—` 2,20,000.

\nc-X-{Zhyw—` 2,200.

sS≠¿ t^m-ans‚ hne—` 400+72 (Pn. F-kv.- ‰n. Dƒs∏sS).

sS≠¿ t^mdw hn¬]-\-bpsS Ah-km\ Xob-Xnbpw ka-bhpw—26˛12˛2024, 1 aWn hsc.

sS≠¿ t^mdw kzoI-cn-°p∂ Ah-km\ Xob-Xnbpw ka-bhpw—26-˛12˛2024, 3 aWn hsc.

sS≠¿ t^mdw Xpd-°p∂ Xob-Xnbpw ka-bhpw—26˛12˛2024, 3.15 aWn.

sS≠¿ kw_-‘n®v IqSp-X¬ hnh-c-ßƒ {]hrØn Znh-k-ß-fn¬ sshIp-t∂cw 5 aWnhsc

Cu Hm^o-kn¬ e`y-am-Wv. sSen-t^m¨ \º¿: 0477-˛2252015.

kwÿm\ Pe-K-Xm-KX hIp∏v Ub-d-IvS-td‰,v

(H∏v)

Be-∏pg.

Ub-d-IvS¿.

10th December 2024

KERALA GAZETTE

935

____________________________________________________________________________________________________________________________

This is a digitally signed Gazette.

Authenticity may be verified through https://compose.kerala.gov.in/

]p\¿ Z¿Lmkv ]ckyw

[No. 30/2024-25]

No. PTGD/1978/2024-G4.

2024 Unkw_¿ 4.

k¿°m¿ A®p-Iq-S-ß-fnte°v Szn≥ eq∏v hb¿, ss\tem¨ tIm´Uv lmß¿ F∂nh

hnX-cWw sNøp-∂-Xn\v ap{Z-h® Z¿Lm-kp-Iƒ £Wn-®p-sIm-≈p-∂p. Z¿Lm-kp-Iƒ 17˛12-˛2024 D®bv°v

1 aWn hsc kzoI-cn-°p-∂Xpw At∂ Znhkw 3 aWn°v Z¿Lm-kp-Im-cp-sStbm Ah¿ Npa-X-e

-s∏-Sp-Ønb GP‚p-amcp-sStbm km∂n-≤y-Øn¬ Xpd-°p-∂-Xp-am-Wv. Z¿Lmkv Ab-bv°p∂ Ih-dn\p

apI-fn¬ “]p\¿ Z¿Lmkv \º¿ 30/2024˛25 Szn≥eq∏v hb¿, ss\tem¨ tIm´Uv lmß¿

hnX-cWw kw_-‘n®v’’ F∂v D]-te-J\w sNbvXn-cn-°-Ww. Xma-kn®p In´p∂ Z¿Lm-kp-Iƒ

bmsXmcp Imc-W-h-imepw kzoI-cn-°p-∂-X-√.

Z¿Lm-kp-Iƒ \n¿±njvS t^md-Øn¬ kmºnƒ klnXw ka¿∏n-t°-≠-Xm-Wv. Z¿Lmkv

t^md-ßƒ HdnPn-\¬ ` 500 (+ Pn. Fkv. Sn. 18%) \nc-°nepw Uyqπn-t°‰v ` 250 (+ Pn. Fkv. Sn. 18%)

\nc-°nepw Xncp-h-\-¥-]pcw Kh¨sa‚ v sk≥{S¬ {] n¬\n∂pw t\cn´v hmßmhp-∂-Xm-Wv.

Z¿Lmkv t^md-Øns‚ hne-bmbn sN°v, Unam‚ v {Um^v‰v, t]mÃ¬ Hm¿U¿, X]m¬

Ãmºv F∂nh kzoI-cn-°p-Itbm t^mdw hn.]n.]n. Bbn Abbv°pItbm sNøp∂X-√. Z¿Lmkv

^md-ßƒ ssIam‰w sNøphm≥ ]mSn-√m-Ø-Xm-Wv. Z¿Lmkv t^md-ß-fpsS hn¬∏\ 17-˛12-˛2024-˛\v

D®bv°v 12 aWn°v Ah-km-\n-°p-∂-Xm-Wv. ` 200 hne-bp≈ tIcf k¿°m¿ ap{Z]-{X-Øn¬

F-{Kn-sa‚pw samØw XpI-bpsS 1% \nc-X-{Z-hyhpw Z¿Lm-kn-t\m-sSm∏w ka¿∏n-t°-≠-Xm-Wv.

A√m-Øh bmsXmcp Imc-W-h-imepw kzoI-cn-°p-∂-X-√.

km[-\ -km-a-{Kn-Iƒ—1. Twin Loop wire 14.3 mm—27 Roll

2. Black Colour Nylon Coated Hanging Stump

[40cm(16") \of-ap-≈Xpw a≤y-Øn¬ A¿≤-hr-Øm-Ir-Xn-bn-ep-≈Xpw

7.9 mm L\-ap-≈-Xp-am-b-Xv]—4000 Nos.

AS-¶¬ XpI—` 2,15,070

hne \nP-am-bn-cn-t°≠ XobnXn—31-˛3-˛2025.

[No. 30/2024-25]

No. PTGD/1978/2024-G4.

4th December 2024.

Sealed tenders superscribed as Re-Tender No. 30/2024-25 for the supply of Twin Loop

Wire & Nylon Coated Hanger is invited by the undersigned. The tenders along with samples should

reach this office on or before 17-12-2024 at 1 p.m. and the same will be opened at

3 p. m. on the same day in the presence of tenderers or their authorized representatives who may

be present at that time. Tenders shall be submitted in the prescribed form which can be had from

the office of the undersigned on cash payment of ` 500 + GST @ 18% for original form and

` 250 + GST @ 18% for duplicate. Cheque, Demand Draft, Postage Stamps, Postal Orders etc. will

not be accepted towards the cost of forms nor will the forms be sent by V.P.P. The tender forms

are not transferable. Sale of tender forms will be closed at 12 Noon on 17-12-2024. An agreement

in Kerala Stamp Paper worth ` 200 should be executed along with the tenders. Late tenders and

tenders not accompanied by Earnest Money Deposit @ 1% of total cost and preliminary agreement

in Kerala Stamp Paper worth ` 200 will not be accepted on any account.

Item—1. Twin Loop wire 14.3 mm—27 Roll.

2. Black Colour Nylon Coated Hanging Stump

[40 cm(16") \of-ap-≈Xpw a≤y-Øn¬ A¿≤-hr-Øm-Ir-Xn-bn-ep-≈Xpw

7.9 mm L\-ap-≈-Xp-am-b-Xv]—4000 Nos.

936

KERALA GAZETTE

Part III

____________________________________________________________________________________________________________________________

This is a digitally signed Gazette.

Authenticity may be verified through https://compose.kerala.gov.in/

Total PAC——` 2,15,070.

Name and Designation of the officer to whom the tenders are to be submitted—

Janardhanan, K., Director of Printing, Govt. Central Press, Thiruvananthapuram.

Name of Office—Directorate of Printing, Government Central Press, Thiruvananthapuram-1.

General Conditions

The rate quoted should be inclusive of all taxes, transportations, loading and unloading

expenses f.o.r. Government Central Press, Thiruvananthapuram-695 001.

Samples should be supplied.

The item should be supplied within 7 days on the receipt of confirmation.

The payment will be made only after satisfactory receipt and survey reports.

Bank details should be furnished in the Bill.

The rates should be valid up to 31-3-2025.

The purchaser has the right to cancel the supply order at any time without assigning any

reason.

Office of the Director of Printing,

Govt. Central Press,

(Sd.)

Thiruvananthapuram.

Superintendent of Govt. Presses.

10th December 2024

KERALA GAZETTE

937

____________________________________________________________________________________________________________________________

This is a digitally signed Gazette.

Authenticity may be verified through https://compose.kerala.gov.in/

____________________________________________________________________________________________________________________________

PUBLISHED BY THE SUPERINTENDENT OF GOVERNMENT PRESSES

AT THE GOVERNMENT CENTRAL PRESS, THIRUVANANTHAPURAM, 2024