compose.kerala.gov.in

egazette.kerala.gov.in

printing.kerala.gov.in

േകരള സരകാര

GOVERNMENT OF KERALA

േകരള ഗസറ്

KERALA GAZETTE

ആധികാരികമായി ്പസിദെപടുതുനത

PUBLISHED BY AUTHORITY

Regn.No. KERBIL/2012/45073

dated 2012-09-05 with RNI

Reg No.KL/TV(N)/634/2021-2023

വാല്ം 15

Vol. XV

നമര

No.

െചാവ, 2026 ജനുവരി 06

Tuesday, 06th January 2026

1201 ധനു 22

22nd Dhanu 1201

1947 െപൗഷം 16

16th Pousha 1947

Part III

Agriculture Development and Farmers Welfare

േകരള സരകാര

GOVERNMENT OF KERALA

2026

This is a digitally signed Gazette.

Authenticity may be verified through https://compose.kerala.gov.in/

ADFW/AXE/KLM/200/2025-AE(3)

Date: 02.01.2026

e-Tender Notice

Notice inviting e- Tender for the Supply of Tools/ diagnostic devices/

workshop equipments/ spare parts to Farm Machinery Clinic, Kollam. (Annual

Plan 2025-26 – Support to Farm Mechanization)

The Assistant Executive Engineer (Agri), Kollam for and on behalf of the Governor

of Kerala invites online bids from competent dealers/manufactures/company for the supply of

following items

SL.

Part 1-HAND TOOLS

Nos

Mechanic Tool set

Supplying a comprehensive professional-grade The Mechanics Tool Kit with a

durable, impact-resistant moulded suitcase (BMC case) with designated

compartments for each component, ensuring easy portability and organization and

includes the Chrome-Vanadium tools and accessories listed as

Appendix 1

1. 1/2" Drive Set

a) Hexagonal Socket (19 Pcs) – Sizes: 8, to 32 mm

b) Star Socket (5 Pcs) – Sizes: E10, E12, E14, E16, E20

c) Flex Handle (1 Pc) – Length: 375 mm

d) Ratchet Wrench (1 Pc) – 1/2" Drive, 45 Teeth (Reversible)

e) Extension Bars (2 Pcs) – Lengths: 75 mm (3"), 250 mm (10")

f) Universal Joint (1 Pc) – 1/2" Drive

g) Three-way Adaptor (1 Pc) – 1/2" Female × 3/8" Male

h) Spark Plug Sockets (2 Pcs) – Sizes: 16 mm and 21 mm

i) L-Handle (1 Pc) – 1/2" × 10"

2. 3/8" Drive Set

a) 12-Point Socket (15 Pcs) – Sizes: 6, to 22 mm

b) Ratchet Wrench (1 Pc) – 3/8" Drive, 45 Teeth (Reversible)

c) Extension Bars (2 Pcs) – Lengths: 75 mm (3"), 150 mm (6")

d) Universal Joint (1 Pc) – 3/8" Drive

3. 1/4" Drive Set

a) Screwdriver Bits (26 Pcs, 25 mm Length, S2 Steel)

b) Phillips (PH): PH0, PH1, PH2, PH3

c) Pozidriv (PZ): PZ0, PZ1, PZ2, PZ3

d) Slotted (SL): SL4, SL5.5, SL7

e) Hex (H): H2, H3, H4, H5, H6, H7, H8, H10

06th January 2026

KERALA GAZETTE

____________________________________________________________________________________________________________________________

This is a digitally signed Gazette.

Authenticity may be verified through https://compose.kerala.gov.in/

f) Torx (T): T10H, T15H, T20H, T25H, T27H, T30H, T40H

g) Bit Holder (1 Pc) – 1/4" Hex

h) Hexagonal Sockets (9 Pcs) – Sizes: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10 mm

i) Star Sockets (5 Pcs) – Sizes: E4, E5, E6, E7, E8

j) Ratchet Wrench (1 Pc) – 1/4" Drive, 45 Teeth (Reversible)

k) Extension Bars (3 Pcs) – Lengths: 50 mm (2"), 100 mm (4"), 150 mm

(6")

l) Universal Joint (1 Pc) – 1/4" Drive

m) Three-way Adaptor (1 Pc) – 3/8" Female × 1/4" Male

n) Spinner Handle (1 Pc) – 1/4" × 150 mm

o) Flexible Extension Bar (1 Pc) – 1/4" × 150 mm

4. Combination Spanners (17 Pcs) – Sizes: 6, to 24 mm

5. Flare Nut Spanners (5 Pcs) – Sizes: 8×10, 10×12, 11×13, 12×14, 17×19

6. Hex Key Set (10 Pcs) – Sizes: 2.5, 3, 4, 5, 6, 7, 8, 10, 12, 14 mm

7. Machinist Hammer (1 Pc) – 300 g with fiberglass or wooden handle

8. Combination Pliers (1 Pc) – 7"

9. Locking Pliers (1 Pc) – 10" Curved Jaw Lock Wrench

10. Slotted Screwdrivers (2 Pcs) – SL6.5 × 100 mm and SL6.5 × 150 mm

11. Phillips Screwdrivers (2 Pcs) – PH2 × 100 mm and PH2 × 150 mm

12. Stubby Screwdrivers (2 Pcs) – PH2 × 38 mm and SL6.5 × 38 mm

All sockets, spanners, and ratchets shall be made from Chrome Vanadium Steel (Cr-

V), heat-treated, and chrome-plated for corrosion resistance. Screwdriver bits shall

be of S2 Alloy Steel for high torque resistance. Ratchets shall have a minimum of 45

teeth with a quick-release and reversible mechanism. All tools shall conform to DIN

/ ISO standards or equivalent. Suitcase colour should be Standard Industrial Colour

(Black / Blue / Grey or similar)- Preferably Tapariya or Eastman

Tee Spanner Set including spanners ranging from 8 mm to 19 mm made from

chrome vanadium steel (Cr-V), hardened and tempered for durability, the handle

shall be T-shaped, providing maximum torque and grip and surface finish shall be

nickel-chrome plated for corrosion resistance. Preferably Tapariya or

Eastman

Deep Socket Set consist of sockets from 8 mm to 22 mm, made of chrome

vanadium steel, fully hardened, tempered, and chrome-plated, the sockets shall have

six-point or twelve-point configurations for high torque applications, suitable for use

with ratchet handles and extension bars. Preferably Tapariya or Eastman

Combination plier 6" manufactured from high-grade alloy steel, with precision

machined jaws, cutting edges induction-hardened for long life. Handles shall be

double-dipped with insulated grips for comfort and safety. Preferably

Tapariya or Eastman

Combination plier 8" manufactured from high-grade alloy steel, with precision

machined jaws, cutting edges induction-hardened for long life. Handles shall be

double-dipped with insulated grips for comfort and safety. Preferably

Tapariya or Eastman

Circlip plier internal 7" made of high-grade alloy steel, with spring-loaded return

and polished tips for easy installation and removal of internal retaining rings,

Handle grips shall be PVC or rubber-coated. Preferably Tapariya or

Eastman

Circlip plier external 7" made of high-grade alloy steel, with spring-loaded return

and polished tips for easy installation and removal of internal retaining rings,

Handle grips shall be PVC or rubber-coated. Preferably Tapariya or

Eastman

KERALA GAZETTE

Part III

____________________________________________________________________________________________________________________________

This is a digitally signed Gazette.

Authenticity may be verified through https://compose.kerala.gov.in/

Locking plier (vice grip type) 10" with drop-forged steel jaws with heat-treated

teeth for firm gripping, include an adjustable screw and quick-release lever, Nickel-

plated surface for corrosion protection. Preferably Tapariya or Eastman

Diagonal cutting pliers, 6", made of forged alloy steel, with induction-hardened

cutting edges and insulated handles suitable for cutting wires and small metal parts.

Preferably Tapariya or Eastman

Long Nose Plier 6" Made of forged alloy steel with slim tapered jaws for precision

gripping and cutting in confined spaces, 6" overall length, with insulated handles.

Preferably Tapariya or Eastman

Long Nose Plier 8" Made of forged alloy steel with slim tapered jaws for precision

gripping and cutting in confined spaces, 8" overall length, with insulated handles.

Preferably Tapariya or Eastman

Adjustable pipe wrench suitable for gripping pipes up to 40 mm diameter made

of cast iron body with drop-forged steel jaws, serrated and induction-hardened and

handle painted or powder-coated. Preferably Tapariya or Eastman

Adjustable pipe wrench suitable for gripping pipes up to 75 mm diameter made

of cast iron body with drop-forged steel jaws, serrated and induction-hardened and

handle painted or powder-coated. Preferably Tapariya or Eastman

Heavy-duty pipe wrench with jaw opening up to 110 mm made of forged alloy

steel, precision-machined teeth for firm grip, designed for mechanical and plumbing

use. Preferably Tapariya or Eastman

Heavy-duty filter wrench with high-tensile rubber or nylon strap and steel handle

for removing large oil/fuel filters, Handle length: minimum 300 mm. Suitable for

heavy machinery maintenance. Preferably Tapariya or Eastman

Medium-duty filter wrench with adjustable steel band and handle, suitable for

medium-sized oil filters. Chrome-plated finish with non-slip grip. Preferably

Tapariya or Eastman

Ball pein hammer with 300 gm forged steel head, hardened and tempered. Fitted

with a strong fiberglass handle suitable for riveting, striking, and metal forming.

Preferably Tapariya or Eastman

Soft face hammer with dual rubber striking faces to prevent surface damage. Head

weight approx. 300–500 gm, handle made of fiberglass Preferably Tapariya

or Eastman

Non-marring mallet hammer with rubber or plastic head 40 mm and sturdy

handle. Head weight approx. 1 kg. Suitable for precision fitting without metal

deformation. Preferably Tapariya or Eastman

Sledge hammer with 500 gm (2 lb) drop-forged steel head, hardened and

tempered. Handle of strong wooden or fiberglass construction, securely fixed to

head. Preferably Tapariya or Eastman

Cold chisels made of chrome vanadium or carbon steel (18 mm dia approax) ,

hardened and tempered to 58–60 HRC. Size 25 mm, length 300 mm, Approax

Weight 500 gm Ground cutting edge with anti-slip striking end. Preferably

Tapariya or Eastman

Steel wedges, hardened and ground, used for splitting or aligning. Made of forged

alloy steel with a rust-resistant finish 230 mm Length 1.5 Kg. Preferably

Tapariya or Eastman

Adjustable torque wrench with working range 25–135 Nm. Drive size 3/8" or

1/2", accuracy ±4% of indicated value with reversible ratchet and quick-release

mechanism. Preferably Tapariya or Eastman

Heavy-duty adjustable torque wrench, range 70–340 Nm. 1/2" drive, accuracy

±4%, chrome vanadium construction with calibration certificate. Preferably

06th January 2026

KERALA GAZETTE

____________________________________________________________________________________________________________________________

This is a digitally signed Gazette.

Authenticity may be verified through https://compose.kerala.gov.in/

Tapariya or Eastman

High-capacity torque wrench, range 135–540 Nm. 3/4" drive, accuracy ±4%,

knurled handle for non-slip grip, supplied with protective case and calibration

certificate. Preferably Tapariya or Eastman

Part 2- Description ( Measuring Tools )

Steel scale Set (5 Nos) made of high-quality tempered stainless steel with etched

and permanently engraved graduations in both metric (mm/cm) and inch units.

straight, with accurately ground edges and smooth surfaces, Graduation accuracy

shall conform to IS 1481:1970 or equivalent. Lengths : 150 mm, 300 mm, 600 mm,

450 mm, 1000 mm. Each scale shall have clear visibility markings and corrosion-

resistant satin chrome finish. Preferably Mitutoyo or Bosch

Vernier calipers made of stainless steel, precision-ground and finished, with a

measuring range of 0–200 mm and least count 0.02 mm / 0.001 inch capable of

internal, external, depth, and step measurements. Vernier scale and main scale

markings shall be clearly etched for long-term readability. The instrument shall

conform to IS 3651:1981 or DIN 862 standards. A locking screw shall be provided

for measurement retention, and the tool shall be supplied in a protective case.

Preferably Mitutoyo or Bosch

Outside micrometer (0–25 mm range) of mechanical analog type, conforming to

IS 2967:1975 or DIN 863 standards. The frame shall be rigid and heat-insulated,

with carbide-tipped measuring faces, a friction thimble, and a ratchet stop for

consistent measuring pressure. The least count shall be 0.01 mm, and the thimble

and sleeve shall have clearly graduated markings. The micrometer shall be supplied

with a setting standard and calibration certificate. Preferably Mitutoyo or

Bosch

Outside micrometer (25-50 mm range) of mechanical analog type, conforming to

IS 2967:1975 or DIN 863 standards. The frame shall be rigid and heat-insulated,

with carbide-tipped measuring faces, a friction thimble, and a ratchet stop for

consistent measuring pressure. The least count shall be 0.01 mm, and the thimble

and sleeve shall have clearly graduated markings. The micrometer shall be supplied

with a setting standard and calibration certificate. Preferably Mitutoyo or

Bosch

Feeler gauges made of hardened and tempered spring steel, precision-ground to

required thickness, and permanently marked with size values. The set shall include

multiple 75 mm long blades of 30 different thicknesses 0.03 mm to 1.00 mm

assembled in a steel holder with pivot. Each blade shall be rust-resistant and

polished for smooth operation. The gauge shall conform to IS 3179:1982 or

equivalent standards. Preferably Mitutoyo or Bosch

Wire gauge (Standard BS 1505 type) manufactured from hardened and tempered

steel with precisely cut slots for wire sizes 1 to 36 SWG. The gauge shall be circular

or rectangular in shape with permanent engraved markings. The tool shall comply

with BS 3737 / IS 3177 standards for accuracy. Surface shall be satin chrome or

nickel plated to resist corrosion suitable for measuring diameters of wires, rods, and

drill bits. Preferably Mitutoyo or Bosch

Inside calipers shall be made of forged steel or stainless steel, polished and

hardened. The legs shall have finely ground points with a pivot joint and tension

adjustment for smooth movement. Measuring range: 20–170 mm suitable for

measuring internal dimensions and bore diameters. Shall conform to IS 3564:1985

standards. Preferably Mitutoyo or Bosch

KERALA GAZETTE

Part III

____________________________________________________________________________________________________________________________

This is a digitally signed Gazette.

Authenticity may be verified through https://compose.kerala.gov.in/

Outside calipers made of high-grade carbon or stainless steel with hardened tips,

spring joint, and knurled adjustment nut for precision. Shall conform to IS

3564:1985 or equivalent standards. Surface finish: polished or chrome-plated. 12

inch size Preferably Mitutoyo or Bosch

Centre punch manufactured as per IS 7177 - 1999 or equivalent, made of high

carbon or alloy tool steel, hardened and tempered at the striking end and point.

Length: approximately 150 mm, approximate weight 160 gm with point angle of 60°

± 2°. The striking end shall be chamfered to prevent mushrooming. Surface finish

shall be black oxide or polished. Suitable for marking centers on metal surfaces

before drilling operations. Preferably Mitutoyo or Bosch

Portable digital non-contact tachometer of reputed make, with a non-contact

measuring range of approximately 10 to 99,999 RPM and accuracy not inferior to

±0.04% ±2 digits. equipped with a digital LCD display, data hold, counting function,

and computer/USB interface for data transfer, a working distance of around 0.2 m

with a ±30° working angle, reflective tape, interface cable, and carrying case.

conforming to IEC 61010-1 / IS 13875. Preferably Mitutoyo or Bosch

Part 3- Description ( Auto Electrical and Pump)

Portable True-RMS Digital Multimeter of high-accuracy, capable of measuring

AC/DC voltage up to 1000 V, AC/DC current up to 10 A, resistance, capacitance,

frequency, diode, and continuity. The meter should have features like auto-ranging,

data-hold, min/max, and relative measurement functions with a large back-lit

display of minimum 4000 counts or higher. The instrument shall have overload

protection, fused input terminals, and comply with safety category CAT III 1000 V or

CAT IV 600 V as per IEC 61010-1. The unit shall be housed in a protective insulated

casing suitable for field use and supplied complete with test leads, batteries,

protective case, and calibration certificate. Preferably Continental or

Bosch

Handheld Clamp Meter (True-RMS type) designed for measurement of AC and DC

currents up to 1000 A, with additional functions for AC/DC voltage, resistance,

frequency, and continuity. The jaw opening shall accommodate conductors up to

40–60 mm in diameter. The meter shall feature a large digital display, auto-range

selection, data-hold and peak capture functions, and have an accuracy of ±2 % or

better. It shall meet CAT III 1000 V / CAT IV 600 V safety standards, include

overload and transient protection, and be built in a shock-resistant insulated body.

The clamp meter shall be supplied with test leads, carrying pouch, and calibration

certificate. Preferably Continental or Bosch

Wire Strippers suitable for removing insulation from copper conductors ranging

from 0.5 mm² to 6 mm² Preferably Continental or Bosch

Ratchet-type Crimping Tool designed for insulated and non-insulated terminals

1.5 mm² to 10 mm², with interchangeable dies and ergonomic handles.Alloy Steel

duly Hardened & Tempered Preferably Continental or Bosch

heavy-duty mechanical or ratchet type Cable Cutters suitable for cutting copper

and aluminium cables up to 300 mm² Preferably Continental or Bosch

Soldering Iron shall be of 40 W capacity insulated handle. Cable lugs and ferrules

shall be of tinned copper, crimp type, conforming to DIN 46234/46235 standards

Preferably Continental or Bosch

Infrared Thermometer (IR Gun) shall measure from -50 °C to +550 °C with laser

targeting and digital display. should have rugged, insulated housings and be

supplied with charger, carry case, and calibration certificate. Preferably

Continental or Bosch

06th January 2026

KERALA GAZETTE

____________________________________________________________________________________________________________________________

This is a digitally signed Gazette.

Authenticity may be verified through https://compose.kerala.gov.in/

Battery Load Tester (12V) shall provide controlled load up to 2–200 Ah to assess

battery condition by measuring voltage drop and internal resistance Instruments

shall have clear displays, polarity protection, insulated clamps, and rugged

enclosures for workshop use. Preferably Continental or Bosch

Smart Battery Charger shall provide automatic multi-stage charging for 12 V

batteries with protections for overcharge and polarity reversal. Preferably

Continental or Bosch

Part 4- Description ( Tractor & Auto Mobile)

Spring Compressor – Head Valve type, of reputed make made of high-strength

carbon steel with a corrosion-resistant finish, having an overall length of

approximately 750 mm and weight around 700 g conforming to relevant standards

for hand tools such as IS 5781 / IS 6131 / ISO 6787 or equivalent. Preferably

Tapariya or Bosch

Piston Ring Compressor (set of 3) of reputed make, made of hardened and

tempered alloy or carbon steel with a polished or chrome-plated corrosion-resistant

finish, and provided with a ratchet or key-type locking mechanism for uniform

compression and easy releasewith an adjustable diameter range suitable for

standard engine pistons (50 mm to 125 mm with 75 mm height, 90 mm to 175

mm with 100 mm height, and 90 mm to 175 mm with 150 mm height),

conforming to relevant standards such as IS 7347 / ISO 1174 to be supplied

complete with necessary tightening wrench or handle. Preferably Tapariya

or Bosch

Portable Diesel Injector Nozzle Pop Tester, with a dual-scale pressure gauge (0–

400 BAR / 0–6000 PSI), a manual hydraulic system with an oil cup capacity of 0.8

litres, constructed from high-grade plastic, and a rugged metallic pump body,

approximate weight of 4.25 kg, conforms to ISO 4113 (Calibration fluid for diesel

injection equipment) and ISO 4008-1 / ISO 4008-2 (Diesel fuel injection test

equipment – Testing of injection pumps and injectors). Preferably Tapariya

or Bosch

Injector Puller Set (8 pcs), including eight precision-engineered oxidized carbon

steel components comprising an inertia hammer, a joint for accessing hard-to-reach

areas, and six threaded adapters with sizes M12×1.75, M17×1, and M27×1, ensuring

compatibility with injectors from major manufacturers, hammer length of 350 mm

all conforms to ISO 6789:2017 (Torque tools – Requirements and test methods) and

DIN 3122 (Hand-operated tools for mechanical drive). Preferably Tapariya

or Bosch

Mechanical Puller (3″, 2/3-Jaw, Double Ended) of reputed make made of hardened

and tempered alloy or carbon steel and finished with corrosion-resistant coating,

with interchangeable 2-jaw and 3-jaw configuration, allowing both internal and

external gripping applications, nominal jaw size shall be 3 inch (76.2 mm), with a

spread of approximately 76 mm, reach of about 65 mm, and working diameter

range from 15 mm to 80 mm, threaded spindle length 125 mm, conforming to IS

6149 / ISO 2985 standards. Preferably Tapariya or Bosch

Mechanical Puller (8″, 2/3-Jaw, Double Ended) of reputed make made of hardened

and tempered alloy or carbon steel and finished with corrosion-resistant coating,

with interchangeable 2-jaw and 3-jaw configuration, allowing both internal and

external gripping applications, nominal jaw size shall be 8 inch (203.2 mm), with a

spread of approximately 203 mm, reach of about 177 mm, and working diameter

range from 30 mm to 210 mm, threaded spindle length 174 mm, conforming to IS

6149 / ISO 2985 standards. Preferably Tapariya or Bosch

KERALA GAZETTE

Part III

____________________________________________________________________________________________________________________________

This is a digitally signed Gazette.

Authenticity may be verified through https://compose.kerala.gov.in/

Valve Seat & Face Cutter Set of seat cutters, face cutters, arbors, and pilots (20 Nos)

of high-grade alloy steel with precision-ground cutting edges, hardened and

tempered to maintain cutting efficiency, conforms to IS 5517:1993 (Specification for

cutting tools – General requirements) and ISO 513 (Classification and application of

cutting tool materials) Preferably Tapariya or Bosch

T-Handle Spark Plug Socket Wrench (21 mm) carbon steel with a chrome-plated

finish, with a 360-degree swivel head for flexible operation, a plastic grip on the T-

handle, a rubber insert within the socket, an approximate weight of 110 grams, and

conforming to relevant standards for hand tools. Preferably Tapariya or

Bosch

10pcs carburetor adjusting tool kit including: 21-Teeth Splined, 7-Teeth Splined,

Single D, Small Head Single D, Double D, Pac Man, Small Head Pac Ma,n Hexagon

Shaped, Six Star, and carburetor cleaning tools all made of high-quality stainless

steel wear resistant and long lasting with ergonomic handle comfortable to grip and

stable to use. Preferably Tapariya or Bosch

The Heavy-Duty Spark Plug Cleaner and Tester designed to clean and test spark

plugs under simulated engine conditions, operates on a 220 V AC supply and

incorporates a 12 V / 12 kV ignition coil for spark generation and a 220 V / 12 V

electronic vibrator for cleaning including a pressurized testing chamber with a

working pressure of up to 12 kgf/cm² and a separate abrasive cleaning chamber

equipped with a double-acting valve for blasting and dust removal, should be

compatible with spark plug sizes M10, M12, M14, and M18 through interchangeable

rubber adapters and features a pressure regulator for maintaining safe and

consistent operation. Product should conform to general standards for electrical

safety and workshop equipment, such as IS 302 (Part 1): Safety of Electrical

Equipment, IS 10326: Automotive Service Equipment – Spark Plug Testers, or

equivalent international standards Preferably Tapariya or Bosch

Portable Fuel and Vacuum Gauge Tester Kit for testing fuel pump pressure, fuel

pump vacuum, carburettor intake, and manifold vacuum systems in petrol engines

with dual gauges — a pressure gauge ranging from 0 to 10 psi (0–0.7 kg/cm²) and a

vacuum gauge ranging from 0 to 28 in-Hg (0–70 cm-Hg) — for accurate

measurement of engine fuel and air system performance, with standard automotive

fittings for quick connection to various fuel and vacuum lines and conforming to IS

1446: Automotive Test Equipment – Pressure and Vacuum Gauges or equivalent

international standards like SAE J1812 for fuel system testing instruments.

Preferably Tapariya or Bosch

Petrol Engine Compression Tester Kit (400 mm) including threaded adaptors in

sizes M10, M12, M14, and M18, along with two rubber cone ends for both threaded

and non-threaded testing, equipped with straight and angled push-on connectors

and a 400 mm flexible hose, to diagnose issues related to piston rings, valves, or

head gaskets, suitable for cars, motorcycles, and small petrol engines. Preferably

Tapariya or Bosch

Heavy-duty Sprocket Chain Breaker and Splitter tool suitable for breaking,

splitting, and repairing chains of size 420 to 530 made of high-grade carbon steel

Preferably Tapariya or Bosch

Compact Chain Saw Grinder for precise grinding of chain saw blades for a rated

voltage of 220–230 V at 50/60 Hz, with an input power of 300 W and a no-load

speed of 8400 rpm, equipped with a 100 mm grinding wheel suitable for most

standard chain saw chains, weighing around 2.5 kg, conforming to general safety

and performance standards such as IS 302 (Part 2/Sec 201): Electrical Safety for

Hand-held Tools and IEC 60745-2-4 Preferably Tapariya or Bosch

06th January 2026

KERALA GAZETTE

____________________________________________________________________________________________________________________________

This is a digitally signed Gazette.

Authenticity may be verified through https://compose.kerala.gov.in/

Soldering Station Operating on a 220–240 V AC, 50/60 Hz supply, input power of

60 W, with a preheat time of approximately 1 minute, digital temperature display,

adjustable and thermostatic temperature control via a rotary knob, built-in ceramic

heating element, a straight tip head, a durable stand for iron placement, packed in a

color box, conforms to IEC 60335-2-45: Household and similar electrical appliances

– Safety of portable heating tools and IEC 61340-5-1: Protection of electronic

devices . Preferably Tapariya or Bosch

Compact, durable, and easy to operate portable High-Pressure Hand-Operated

Portable Grease Pump with a 10 kg grease capacity and delivers a material output

of approximately 3 grams per stroke, maximum block pressure of 140 kg/cm², a 2-

meter high-pressure rubber hose fitted with end connections. Preferably

Tapariya or Bosch

Double Piston Lever Grease Gun delivering up to 2.4 grams of grease per stroke,

pressures up to 6000 psi, with a double-piston mechanism, compact and lightweight

(approx. 2 kg). Preferably Tapariya or Bosch

Durable and easy-to-use steel Lubrication Oil Dispenser Can for smooth and

controlled lubrication with a 500 ml capacity, made from high-quality steel with a

powder-coated finish, the can is lightweight (approx. 200 g), waterproof, and

ergonomically designed for comfortable handling and precise oil flow. Preferably

Tapariya or Bosch

Part 5- Description (Power Tools & Equipments)

Corded type electric impact wrench conforming to IS 7151:1983 / IEC 60745-2-2

[vibration (≤11.5 m/s²), and noise (<104 dB(A))], with a continuous input rating of

400 W,. It shall provide a maximum fastening torque of 350 N·m, with a no-load

speed of 2000 rpm and impact rate of 2000 blows per minute, 12.7 mm (½”) square

drive, a 2.5 m power supply cord. The housing in impact-resistant polymer with

reinforced internal metal gear casing, suitable for tightening and loosening ensuring

efficient operation for both standard (M12–M22) and high-strength bolts (M12–

M16) in vehicle and machinery maintenance applications Preferably Makita

or Bosch

Heavy-Duty Angle Grinder, of reputed make, single phase 220–240 V, 50/60 Hz

AC supply, input power 2200 W no-load speed 8500 RPM to use with 180 mm (7")

diameter abrasive wheels, and equipped with side handle, wheel guard, and spindle

lock a 2.0 m power supply cord and conforming to IS 7554 / IEC 60745-2-3 / ISO

11148-7 or equivalent standards (low vibration level (≤6.5 m/s²), sound pressure

level not exceeding 91 dB(A)). Preferably Makita or Bosch

Electric Power Drill (corded type) of reputed make, single phase 220–240 V, 50

Hz AC supply, 350 W and variable speed range up to 3000 RPM (no load). including

a pistol-grip body, keyed or keyless chuck, and a 2.0 m power supply cord

complying with IS 7554 / IEC 60745 / ISO 11148 or equivalent standards, [low

vibration (≤3.0 m/s²) and sound pressure level below 80 dB(A)] supplied complete

with chuck key, side handle (if applicable), and instruction manual. Preferably

Makita or Bosch

Portable Electric Heat Gun powered by an 1800 W motor operating at 230 V AC,

for adjustable airflow between 350–550 L/min and a working temperature range of

60°C to 550°C, selectable in three stages (60/350/550°C), achieves full heat-up

within 1 minute, with a heat-resistant plastic body and heat isolation cap, weighs

750 g and features a 2 m cord length and conforming to IEC 60335-2-45: Household

and similar electrical appliances – Safety of portable heating tools and IEC 61000-3-

11/12: Electromagnetic compatibility standards. Preferably Makita or

Bosch

KERALA GAZETTE

Part III

____________________________________________________________________________________________________________________________

This is a digitally signed Gazette.

Authenticity may be verified through https://compose.kerala.gov.in/

Portable air compressor, of reputed make, single phase 230 V, 50 Hz AC supply,

fitted with an electric motor of 2.0 HP (1.5 kW) a maximum working pressure of 8

bar, free air delivery not less than 200 LPM (7.2 CFM), and a motor speed of 2850

RPM. air receiver tank of 50 liters capacity, conforming to IS 5456 / IS 2825

standards and the compressor shall conform to IS 10437 / ISO 1217, and fitted with

pressure gauge, safety valve, drain valve, and automatic pressure switch. The

complete unit shall be portable, vibration-damped, and equipped with wheels and

handle for easy movement. Preferably Makita or Bosch

Single Phase Arc Welding Machine of reputed make, with inverter-based IGBT

technology to be operated on AC 220V ±15%, 50/60 Hz single phase supply and

deliver a welding output current up to 400 Amp with a duty cycle of not less than

60%, an efficiency of minimum 80% and power factor not less than 0.73, with

insulation class F and protection grade IP21 as per IS 2879 / IS 3024 or equivalent

international standards. and necessary accessories such as welding cable, electrode

holder, and earth clamp etc. should be included. Preferably Makita or Bosch

Bench Grinder, of reputed make, single phase 220–240 V, 50 Hz AC supply

equipped with a 350 W induction motor of 2950 RPM. two 200 mm diameter

grinding wheels each provided with eye shields and wheel guards, heavy-duty

aluminum base with tool rest, tool storage box, and safety accessories etc. complete

conforming to IS 302 / IS 6932 / IEC 61029 or equivalent. Preferably Makita

or Bosch

Bench Drill Press, of reputed make, single phase 120 V AC, 50/60 Hz fitted with

electric motor of approximately 1/3 HP rating, manually adjustable work table with

depth stop for accurate drilling. chuck guard, power switch with overload

protection, and belt or gear-driven spindle system conforming to applicable safety

and performance standards such as IS 2425 / ISO 16089 / IEC 61029 or equivalent

supplied complete with drill chuck, key, and instruction manual. Preferably

Makita or Bosch

Part -6 Description ( Furniture and general)

Nos

bench vice of heavy-duty engineer’s type, suitable for fitting and general workshop

applications with jaw width 125 mm (5 inches), with replaceable serrated hardened

steel jaws for a firm grip on workpieces, the body and sliding jaw shall be made from

high-grade cast iron or forged steel, precision machined to ensure smooth operation

and alignment. The vice shall be equipped with a large-diameter acme-threaded

spindle and steel handle with knurled ends for easy tightening (1600 kg tightening

force) and release. The vice includes a 360° swivel base with locking mechanism,

allowing positioning and adjustment as required during work. The anvil surface on

the rear shall be machined and hardened, suitable for light hammering operations.

The vice shall have a clamping capacity of at least 150 mm, and all moving parts

shall be protected against rust and corrosion by paint or plating. The bench vice

should be suitable for mounting on heavy-duty wooden or steel workbenches and

capable of withstanding heavy mechanical use in workshops and maintenance

facilities. It shall conform to IS: 2586 (Specification for Bench Vices, Heavy Duty) or

equivalent standard. Preferably Goderej or Dewalt

06th January 2026

KERALA GAZETTE

____________________________________________________________________________________________________________________________

This is a digitally signed Gazette.

Authenticity may be verified through https://compose.kerala.gov.in/

Heavy-duty roller tool cabinet with 4 Drawers and One cupboard suitable for

use in mechanical, workshops for organized storage of hand tools, instruments, and

accessories made of high-quality cold-rolled steel sheet with a cabinet body

thickness of 0.8–1.0 mm and drawer sheet thickness of 0.7 mm, with an overall size

of 765 mm (L) × 465 mm (W) × 812 mm (H) and an overall height of 976 mm

including casters. drawers of size 536 mm (L) × 410 mm (W) × 74.5 mm (H),

mounted on precision ball-bearing slides and the top panel area should be suitable

for tool placement during maintenance work. The unit should be mounted on four

heavy-duty casters of size 5″ × 2″, two of which shall be swivel casters with locking

brakes for easy mobility and stability during use. The cabinet shall include a central

locking system for all drawers, should be surface-treated with powder coating for

corrosion resistance and a smooth finish. The tool cabinet shall conform, where

applicable, to the general guidelines of IS 7155 (Industrial Trolleys and Cabinets)

and ISO 9001:2015 quality manufacturing standards. Preferably Goderej or

Dewalt

Oil Drain Pan made of high-density polyethylene (HDPE) with a capacity of 16

litres including integrated handles, a pouring spout, and anti-spill lips to prevent

leakage during draining suitable for chemical resistance to engine oil, transmission

fluids, and coolants. Preferably Goderej or Dewalt

Oil Drain Pan made of high-density polyethylene (HDPE) with a capacity of 8 litres

including integrated handles, a pouring spout, and anti-spill lips to prevent leakage

during draining suitable for chemical resistance to engine oil, transmission fluids,

and coolants. Preferably Goderej or Dewalt

Rack for Batteries, made of well-seasoned hardwood or marine plywood with

sturdy MS frame or wooden supports. Includes 3–4 ventilated shelves with acid-

resistant coating and removable rubber or PVC mat. Designed to hold multiple

batteries safely and prevent corrosion. Approx. size: 1500 mm × 1000 mm × 450

mm. Preferably Goderej or Dewalt

Rack for Lubricants constructed from treated wood or plywood frame with raised-

edge shelves to contain spills. Each shelf shall carry at least 100 kg and be coated

with oil-resistant paint. Suitable for 1–20 L containers. Approx. size: 1800 mm ×

1200 mm × 450 mm. Preferably Goderej or Dewalt

Rack for Spares fabricated from high-quality wood or plywood with MS

reinforcement. Includes adjustable or fixed shelves (3–5 tiers), each supporting up

to 150 kg (UDL). Finished with protective paint or polish for workshop use. Approx.

size: 2000 mm × 900 mm × 450 mm. Preferably Goderej or Dewalt

Industrial Wet and Dry Type Vacuum Cleaner with a power rating of 1500 W

and operating voltage of 220–240 V, 50 Hz, suitable for workshop and service bay

cleaning applications with a capacity of 35 litres, a vacuum suction pressure of 200

mbar and an airflow rate of 53 L/s, ensuring high-efficiency dust and liquid removal.

The tank should be made of corrosion-resistant stainless steel (minimum SS 304

grade) with heavy-duty caster wheels for mobility. It should be provided with a

flexible 5 m power cable, washable filters, blower function, and accessories for both

wet and dry operation. The vacuum cleaner shall conform to IEC 60335-2-69 (Safety

for wet and dry vacuum cleaners for commercial use) or equivalent Indian Standard

IS 11621:1986, and include overload and thermal protection features for motor

safety. Preferably Goderej or Dewalt

Portable, electric-operated industrial pressure washer conforming to IEC

60335-2-79 / IS 8442 with a power rating of 1700 W (230 V, 50 Hz single-phase

supply) and a maximum working pressure of 130 bar and a flow rate of 7 litres per

minute, with self-priming capability of 0.5 m, high-pressure foam detergent system,

6 m PVC hose, manual hose reel, 5 m power cable, 3-in-1 nozzle and ergonomic

handle Preferably Goderej or Dewalt

Part 7-Description (Safety)

KERALA GAZETTE

Part III

____________________________________________________________________________________________________________________________

This is a digitally signed Gazette.

Authenticity may be verified through https://compose.kerala.gov.in/

ABC powder type Fire extinguishers, IS 15683:2018 compliant, portable type

with a minimum capacity of 4 kg suitable for Class A fires. Dry chemical powder

(mono ammonium phosphate) based, stored pressure type with working pressure

of 15 bar, suitable for electrical and combustible material fires.Extinguisher should

have ISI certification, pressure gauge, discharge nozzle, wall mounting brackets, and

color coding as per IS 2190. They shall be factory-filled, tested at twice working

pressure, and supplied with inspection tag and instruction label. Preferably

Honeywell or Karam

CO₂ type Fire extinguishers, IS 15683:2018 compliant, portable type with a

minimum capacity of 4.5 kg suitable for Class B fires . Carbon dioxide gas type with

seamless high-pressure steel cylinder conforming to IS 7285, discharge hose with

horn, and designed for electrical and flammable liquid fires. Extinguisher sould have

ISI certification, pressure gauge, discharge nozzle, wall mounting brackets, and color

coding as per IS 2190. They shall be factory-filled, tested at twice working pressure,

and supplied with inspection tag and instruction label. Preferably Honeywell

or Karam

Foam type Fire extinguishers, IS 15683:2018 compliant, portable type with a

minimum capacity of 9 L, suitable for Class C fires. Stored pressure or cartridge type

using aqueous film-forming foam suitable for flammable liquid fires. Extinguisher

should have ISI certification, pressure gauge, discharge nozzle, wall mounting

brackets, and color coding as per IS 2190. They shall be factory-filled, tested at twice

working pressure, and supplied with inspection tag and instruction label.

Preferably Honeywell or Karam

Fire blanket shall be made of 840 GSM glass fiber or Kevlar-coated woven fabric,

resistant to temperatures up to 550°C, conforming to IS 11871 / BS EN 1869, and

provided in a quick-release wall-mount case. Standard blanket size: 2.00 m × 1.00 m

for personnel protection and small fire suppression. Preferably Honeywell

or Karam

First aid box of size 32.5(H) X 28.5(W) X 8(D) cmshall conform to IS 13154 (Part 1–

3), made of powder-coated metal, GI or ABS plastic, waterproof and corrosion

resistant, to keep all essential medical supplies for industrial workshops (bandages,

antiseptics, gauze, adhesive strips, scissors, burn cream, splints, sterile pads, and

CPR mask). Preferably Honeywell or Karam

Eye wash station wall mount type, made of stainless steel Push Plate 12.7 mm (1/2

inch BSP) Inlet, 4810 SS, providing continuous flow at 1.5 L/min per outlet, operated

by a push plate, complying with ANSI Z358.1 / IS 10592. Preferably

Honeywell or Karam

Emergency safety shower shall deliver a minimum of 75 L/min at operating

pressure of 2–6 bar, with pull-rod activation and stay-open valve SS Stay Open Ball

Valve with Push Plate, materia of construction GI and ABS Plastic Preferably

Honeywell or Karam

Foldable stretcher shall be lightweight aluminum or high-tensile steel frame with

washable canvas sheet, capable of carrying 120 kg load, fitted with safety straps and

rubber handles, conforming to IS 1904 / EN 1865. Preferably Honeywell or

Karam

PPE: helmets HDPE or ABS shell, IS 2925 compliant, chin strap, sweatband, impact-

resistant up to 50 Joules. Preferably Honeywell or Karam

PPE: goggles Polycarbonate lenses, anti-scratch and UV-resistant, IS 5983 / EN 166

compliant, side shields. Preferably Honeywell or Karam

PPE Industrial Gloves: For mechanical work—leather or nitrile (IS 6994); for

chemical work—PVC/neoprene (EN 374); for electrical insulation—rubber Class 0

(IS 4770). Preferably Honeywell or Karam

06th January 2026

KERALA GAZETTE

____________________________________________________________________________________________________________________________

This is a digitally signed Gazette.

Authenticity may be verified through https://compose.kerala.gov.in/

PPE: Safety Boots confirming to IS 15298 / EN 20345 compliant, steel/composite

toe cap (200 J impact), oil- and slip-resistant sole, steel mid sole antistatic.

Preferably Honeywell or Karam

PPE: Protective Overalls with 100% cotton 210 GSM or fire-retardant fabric, full-

sleeve, high-visibility reflective tapes per IS 15748 / EN 20471. Preferably

Honeywell or Karam

Electrical Insulated Gloves conforming to IS 4770 / IEC 60903, suitable for Class 0

(1000 V AC / 1500 V DC) electrical protection, made of high-dielectric natural

rubber, seamless, and rolled cuff type. Each glove shall undergo routine dielectric

test at 5 kV for 1 minute with no puncture or flashover. The gloves shall be Category

RC (resistant to acid, oil, ozone, and low temperature) and provided with a cotton

inner liner and storage pouch. Supplied with test certificate indicating batch

number, test voltage, and date. Preferably Honeywell or Karam

Welding Face Shield suitable for full-face protection during welding, grinding, and

metal fabrication works with a shield size of approximately 9" x 12", made of

durable polypropylene providing high impact, heat, and corrosion resistance. The

face shield shall include an adjustable ratchet-type headgear with multiple

adjustment positions to ensure a secure and comfortable fit for prolonged use. The

approximate weight shall be 1.5 kg or less, and the product shall be supplied as one

complete unit. The face shield should conform to general industrial safety standards

suitable for use in workshops. Preferably Honeywell or Karam

Industrial-grade welding gloves suitable for providing protection, comfort, and

dexterity during welding, cutting, and metal fabrication operations, made from

premium split leather (cowhide or goatskin) with a minimum thickness of 1.2 mm,

offering high resistance to heat, sparks, and mechanical abrasion. The inner lining

shall be made of soft flame-retardant cotton or fleece, providing insulation against

heat and comfort for prolonged use. Each glove shall have reinforced palm and

finger patches for added durability and better grip while handling tools and hot

metal objects. The gloves should be stitched with heat-resistant thread to prevent

seam failure during exposure to high temperatures. The length shall not be less than

14 inches (350 mm), ensuring full hand and wrist protection, with extended cuffs to

safeguard the lower forearm against welding spatter and radiant heat. The gloves

should be conformed to EN 388 (Mechanical Risks) and EN 407 (Thermal Hazards)

or equivalent Indian Standards (IS 6153). They shall be suitable for MIG, TIG, arc,

and gas welding operations. should be heat and flame-resistant, puncture and tear-

resistant, and designed for repeated use in demanding industrial environments. The

pair shall be supplied in standard size (Large/Universal fit) and shall bear proper

labeling indicating brand, size, and conformity to relevant standards. Preferably

Honeywell or Karam

Part 8 -Lifting and Hoisting

Heavy-duty, low-profile type Hydraulic Trolley Jack suitable for lifting vehicles

or machinery up to a rated capacity of 3 tons. The jack shall be constructed from

high-grade steel with welded frame for superior strength and stability, a lifting

range from approximately 130 mm to 465 mm, operated through a hydraulic lifting

mechanism actuated by a detachable pump handle. should be equipped with a

safety overload valve to prevent lifting beyond rated capacity, and precision

hydraulic seals to prevent oil leakage. The unit shall feature a 360° swivel rear caster

and wide front wheels for easy maneuverability. The saddle shall be grooved or

rubber-coated for secure load contact. The jack shall conform to IS 7620 / ASME-

PASE or equivalent standards, and shall be finished with corrosion-resistant powder

coating. Supplied complete with hydraulic oil filled and ready for use. Preferably

Ravaglioli or ATSELGI

KERALA GAZETTE

Part III

____________________________________________________________________________________________________________________________

This is a digitally signed Gazette.

Authenticity may be verified through https://compose.kerala.gov.in/

Floor-mounted electro-hydraulic Two Post Lift of 4,000 kg capacity with

symmetric lifting arms (front and rear adjustable) and double hydraulic cylinders,

made of high-strength steel columns with a minimum inside column clearance of

approximately 2799 mm and a bay width of about 3419 mm, operates on single-

phase or three-phase power supply, 50 Hz frequency, power rating of

approximately 3.0 HP. full height achieved in less than 45 seconds, with an overall

height around 2844 mm including automatic arm locks, mechanical safety latches,

and overload protection etc. all conforming to IS/ISO 13849 standards.

Preferably Ravaglioli or ATSELGI

Industrial-grade, floor-operated type Hydraulic Trolley Jack suitable for lifting

heavy vehicles, machinery, or agricultural equipment up to a maximum capacity of

10 tons. The construction shall be of robust, all-steel design with reinforced chassis

and welded seams for durability. It shall have a lifting range from approximately

150 mm to 500 mm, operated by a long detachable handle providing sufficient

leverage for smooth lifting. The hydraulic system shall incorporate a safety overload

bypass system, precision machined piston and pump for consistent performance,

and a reliable lowering control valve for controlled descent. The jack shall be

equipped with steel swivel casters, wide stance for stability, and a saddle plate with

anti-slip surface. The surface finish shall be rust-resistant enamel or powder coating.

The unit shall comply with relevant IS/ANSI/CE safety standards, factory-tested for

rated load, and supplied ready for workshop service. Preferably Ravaglioli

or ATSELGI

The supply should be made in accordance with Annexures shown in the tender

document.

The

tender

submitted

e-tenders

through

https://etenders.kerala.gov.in. Since this is an e-tender, only those bidders who have

enrolled in the above portal with their own digital signature certificate (DSC) can

participate in the tender. E-Tender document and other details can be obtained from

the above e-portal.

Document sale start date

: 02.01.2026 – 09.00 AM

Last date & time of receipt of e-Tender : 17.01.2026 – 04.00 PM

Date & Time of opening of e-Tender : 19.01.2026 – 11.00 AM

Cost of Tender Form

: 2000/- + (18% GST)

EMD

: 1% of the quoted amount/-

Cost of e-Tender & E.M.D.

: to be paid online

Date up to which the rates are to

remain firm for acceptance

: 60 Days from the date of opening

Performance Security

: 5 % of total bid amount

Period of Supply

: Within 30 days of receipt of supply order.

The

bidder

desiring

take

part

the

bid

shall

log

into

https://etenders.kerala.gov.in/ and then select tender and submit tender online.

06th January 2026

KERALA GAZETTE

____________________________________________________________________________________________________________________________

This is a digitally signed Gazette.

Authenticity may be verified through https://compose.kerala.gov.in/

For obtaining digital signature certificate (DSC) and necessary portal enrolment

bidders can visit the website https://etenders.kerala.gov.in/

Scanned copy of the agreement (Annexure III) in the prescribed format in Kerala

Stamp paper worth Rs. 200/- should be submitted online and original to the undersigned

before the opening of the e-tender.

The rates should be quoted in Indian currency only.

Details with respect to the e-tender and the details of specifications of the item to be

purchased can be obtained from the e-tender website https://etenders.kerala.gov.in

The right of acceptance or rejection of e-tender without assigning any reason is

solemnly vested with Assistant Executive Engineer (Agri), Kollam

The rules and regulations prescribed for e-tenders by the Government of Kerala shall

be applicable to this e- tender also.

The rules and regulations prescribed for e-tenders by the Government of

Kerala shall be applicable to this e- tender also.

Special Conditions:

1. The manufacturers or their authorised dealers are eligible to participate in the

tender and necessary documents are to be produced along with tender.

2. The rates quoted should be inclusive of all taxes, GST etc.

3. The rate should be inclusive of transportation, installation, Demonstartion,

handling or any other cost of supply and the firm has to supply the items at O/o

The Assistant Executive Engineer (Agri), Kollam or as per the direction from the

under signed.

4. Tender evaluation will involve recording and analysing the merits of each

tender. The process will start with preparation of “Comparative Statement”

based on product offered statement and other documents furnished by

bidders incorporating the commercial terms offered. Comprehensive analysis

of the techno-commercial offer will form the basis for subsequent decision.

5. The catalogue/ leaflets/Pamphlet etc… of the product offered should be

submitted along with the tender.

6. Test certificate from competent authority (if any) should be attached along

with the tender.

7. The supplier should supply all necessary fittings and accessories including

safety equipment related to the product.

8. The materials supplied shall be from a recently manufactured batch and shall not

KERALA GAZETTE

Part III

____________________________________________________________________________________________________________________________

This is a digitally signed Gazette.

Authenticity may be verified through https://compose.kerala.gov.in/

include old or previously stocked items.

9. There will be no negotiation if price quoted is considered reasonable else

negotiation will be held only with the lowest bidder i.e. L1.

10. A minimum warranty period of one year is to be assured for the items

supplied.

11. The Assistant Executive Engineer (Agri), Kollam reserves the right to award

the full quantity of supply to any one supplier or distribute the supply to

different suppliers or to change the quantity/item of supply without

assigning reasons thereof.

12. A scanned copy of preliminary agreement signed in Kerala stamp paper

worth Rs. 200/- should be uploaded along with tender documents.

13. EMD and Cost of Tender form etc. should be made by way of online mode of

payment.

14. The successful tenderer will have to execute an agreement in stamp paper

worth as per rule in prescribed form and manner and also to furnish the

required security amount @ 5% of total quoted amount within 14 days of the

receipt supply order.

15. The payment shall be released only after satisfying the qualities and

specifications of the item supplied.

16. Tender received incomplete in any respect will be summarily rejected and the

decision of the under signed on such matters will be final.

17. The supply should be completed within thirty days on receipt of the supply

order.

18. The supplier ensure the availability of spares and timely service of the

machine free of cost/on payment as the case may be.

Communications to be addressed to:

The Assistant Executive Engineer (Agri)

Kavand P O., Kollam-

691003

Phone: 8606069173, 9745286112

E mail: [email protected]

Sd/-

Assistant Executive Engineer (Agri)

Kollam

06th January 2026

KERALA GAZETTE

____________________________________________________________________________________________________________________________

This is a digitally signed Gazette.

Authenticity may be verified through https://compose.kerala.gov.in/

Z¿Lmkv ]ckyw

\º¿ _n. 1255/2025.

2025 Unkw-_¿ 19.

Xøm-dm-°p-∂-Xn-\m-bp≈ KpW-ta-∑-bp≈ 100 FÆw tdmfp-Iƒ GI Weld Mesh (4 ASn hoXn,

50 ASn \ofw, 10 tKPv I\w, 1 X1 inch IÆn AI-ew) e`yam°p-∂-Xn\mbp≈ a’-c-kz-`m-h-ap≈

Z¿Lm-kp-Iƒ £Wn-°p-∂p.

{]Xo-£nX AS-¶¬ XpI—` 3,50,000.

\ncX{Zhyw—` 8,750.

sS≠¿ t^md-Øns‚ hne—` 700+Pn.-F-kv.-Sn.

Z¿Lmkv XobXnbpw ka-bhpw—22˛1-˛2026 cmhnse 10.30 aWnhsc.

Z¿Lmkv t^mdw kzoI-cn-°p∂ Ah-km\ Xob-Xnbpw ka-bhpw—22˛1˛2026

cmhnse 11 -aWnhsc.

t^mdw Xpd°p∂ XobXnbpw ka-bhpw—22˛1-˛2026, cmhnse 11.30 aWn°v.

\n_-‘-\Iƒ

sS≠-dn¬ ]s¶-Sp-°p-hm≥ B{K-ln-°p-∂-h¿ GI Weld Mesh ^man¬ hnX-cWw sNøp-∂-Xn-\p≈

G‰hpw Ipd™ \nc°v tcJ-s∏-Sp-Øn, ko¬ sNbvX sS≠-dp-Iƒ \n›nX \nc-X-{Z-hy-

hnem-k-Øn¬ ^mw Hm^o-kn¬ ka¿∏n-t°-≠-Xm-Wv. ap{Z-h® Ih-dn\p apI-fn¬

GI Weld Mesh (100 FÆw tdmfp-Iƒ) sS≠¿ F∂v tcJ-s∏-Sp-Øn-bn-cn-°-Ww.

2. Z¿Lmkv t^mdØn¬ X∂n-cn-°p∂ Icm¿ ` 200˛s‚ ap{Z-]-{X-Øn¬ Xøm-dm°n

Z¿Lm-kn-t\m-sSm∏tam At∂ Znhkw sshIp-t∂cw 5 aWn°v aptºm ka¿∏n-°Ww.

3. sS≠¿ XpI-Iƒ A°-Øn-epw A£-c-Ønepw hy‡-ambn tcJ-s∏-Sp-tØ-≠-Xpw sS≠¿

\¬Ip∂ hy‡n-bpsS hnem-kw, ]n≥tIm-Uv, t^m¨ \º¿ F∂nh hy‡-ambn

tcJ-s∏-Sp-tØ-≠-Xp-am-Wv.

4. sS≠-dn¬ ]s¶-Sp-°p-∂-h¿ B[m¿ Im¿Uns‚ ]I¿∏v lmP-cm-t°-≠-Xm-Wv.

5. Z¿Lm-kp-Iƒ IrXy-k-a-b-Øp-Xs∂ At∏mƒ lmP-cp-≈-h-cpsS km∂n-≤y-Øn¬ Xpd-°p-∂Xpw

sS≠-dn¬ G‰hpw Ipd™ XpI hmKvZm\w sNøp∂ hy‡n/ÿm]-\Øns‚ t]cn¬ sS≠¿

Xm¬°m-en-I-ambn ÿnc-s∏-Sp-Øp-∂Xpw a‰p-≈-h-cpsS \nc-X-{Zhyw At∏mƒXs∂ aS°n

\¬Ip-∂-Xp-am-Wv.

7. {]hrØn Znhkßfn¬ cmhnse 8 aWn apX¬ 5 aWn hsc-bp≈ ka-bØv ^mw

Hm^o-k¿am-cpsS

km∂n-≤y-Øn¬

am{Xta

^man¬

Cd-°m-\p≈

A\p-hmZw

D≠m-bn-cn°p-I-bp-≈q.

06th January 2026

KERALA GAZETTE

____________________________________________________________________________________________________________________________

This is a digitally signed Gazette.

Authenticity may be verified through https://compose.kerala.gov.in/

8. BZy Icm-dp-Im-cs‚ hogvN-sIm≠v ]p\¿ Z¿Lmkv \S-tØ≠n h∂m¬ k¿°m-cn-\p≈ \jvSw

dh\yq dn°-hdn \nb-a-{]-Imcw BZy Icm-dp-Im-c\n¬ \n∂pw CuSm-°p∂Xm-Wv. em`-amWv

D≠m-Ip-∂-sX-¶n¬ BZy Icm-dp-Im-c\v bmsXmcp Ah-Im-ihpw D≠m-bn-cn-°p-∂X-√.

9. sS≠¿ \S-]-Sn-Iƒ ImcWw ImWn-°msX \nc-kn-°p-∂-Xn-t\m, am‰nhbv°p-∂-Xnt\m D≈

A[n-Imcw ^mw kq{]-≠n¬ \n£n-]vX-am-bn-cn°pw.

10. \n›nX Znhkw GsX-¶nepw Imc-W-Øm¬ Ah-[n-bmbn {]Jym-]n-°p∂]£w, sXm´-SpØ

{]hrØn Znhkw AtX ka-b-Øp-Xs∂ sS≠¿ \S-Øp-∂-Xm-Wv. sS≠¿ kw_-‘n®v

\ne-hn-ep-≈Xpw k¿°m¿ Ime-mIm-e-ß-fn¬ ]pd-s∏-Sp-hn-°p-∂-Xp-amb F√m \nb-a-ßfpw

CXn\pw _m[-I-am-bn-cn-°pw.

11. CtX-∏-‰n-bp≈ IqSp-X¬ hnh-c-ßƒ F√m {]hrØn Znh-k-ß-fnepw ^mw B^o-kn¬ \n∂v

t\cn-t´m, sSe-t^m-Wn-eq-sStbm Adn-bm-hp-∂-Xm-Wv.

C˛-sa-bn¬: [email protected]

Pn√m Irjn ^mw kq{]-≠ns‚ Imcym-e-bw,

(H∏v)

kq{]≠v.

KERALA GAZETTE

Part III

____________________________________________________________________________________________________________________________

This is a digitally signed Gazette.

Authenticity may be verified through https://compose.kerala.gov.in/

____________________________________________________________________________________________________________________________

PUBLISHED BY THE SUPERINTENDENT OF GOVERNMENT PRESSES

AT THE GOVERNMENT CENTRAL PRESS, THIRUVANANTHAPURAM, 2026