PUNJAB GOVT. GAZ. (EXTRA), JUNE 4, 2020 (JYST 14, 1942 SAKA)

559

Regd. No. NW/CH-22

Regd. No. CHD/0092/2018-2020

EXTRAORDINARY

Published by Authority

CHANDIGARH, THURSDAY, JUNE 4, 2020 (JYAISTHA 14, 1942 SAKA)

( 559 )

GOVERNMENT OF PUNJAB

DEPARTMENT OF LOCAL GOVERNMENT

(Town Planning Wing)

NOTIFICATION

The 3rd June, 2020

No. LG/CTP(LG)/2020/1338.–In exercise of the powers conferred by sub-section (1) of section 201

of the Punjab Municipal Act, 1911 (Punjab Act No. 3 of 1911) and sub-section (2) of section 399 of the Punjab

Municipal Corporation Act,1976(Act No. 42 of 1976), and all other powers enabling him in this behalf, the

Governor of Punjab is pleased to make following amendments/additions/modifications in the clauses/schedules/

Tables of the Bye-Laws called “Punjab Municipal Building Bye-Laws 2018” notified vide No. CTP(LG)/

2018/3548 on 22.11.2018 to be read with subsequent amendment notified vide No. CTP(LG)/2019/3977 on

dated 31-12-2019. These shall come into effect from the date of notification.

Clause 4.13, 4.14 and 4.15 of the Amended Bye-laws 2019 are substituted by the following:

4.13 (a)

INDUSTRIAL: Coverage, F.A.R., Height etc.

Set back lines, ground coverage and height of industrial buildings in the government approved schemes/

Industrial Focal Points transferred to the local bodies shall be as per approved zoning plans/schedule

of clauses.

4.13(b)

In the non-scheme industrial land use zones ground coverage, F.A.R. and height shall be regulated

as following and other components shall be regulated as per the provisions of the Factories Act,

1948 and the rules made there under.

NOTE:

Residential components in the industrial plot / premises shall not exceed 15% of the area of

the site and shall be within the maximum permissible covered area.

PUNJAB GOVT. GAZ. (EXTRA), JUNE 4, 2020 (JYST 14, 1942 SAKA)

560

INDUSTRIAL PLOTTED & GODOWNS/ STORAGE BUILDINGS

Table 1

INDUSTRIAL PLOTTED:

Table is substituted by following:

Parameter

Permissible Limits

Minimum Approach Road

12 meters

Plot Size

upto 300 Square meters

Maximum Ground Coverage

65 % of the plot area*

Maximum Floor Area Ratio

1:3.0

Maximum Height of Building

15 meters for General Industry and 21m in case of Information

Technology, Textile, Knitwear and Sports Industry

Note: Excluding mumty, parapet, lift room and architectural

features

Setbacks around buildings

Front setback

20% of plot area

Rear and Side setback ,

15% of plot area

if left at any point of

the building,

Parking

General, Textile, Knitwear

1 ECS per 100 sq. meters of the

and Sports Industry

total covered area.

Information Technology

For site area upto 2 Acres, 1 ECS

per 100 sq. meters of the total

covered area.

For site area above 2 Acres, 2 ECS

per 100 sq. meters of the total

covered area.

*5% additional ground coverage shall be permitted in case of retail service industry.

Table 2

INDUSTRIAL PLOTTED

Table is substituted by following:

Parameter

Permissible Limits

Minimum Approach Road

12 meters

Minimum Plot Size

Above 300 Sq. meters

Maximum Ground Coverage

65 % of the plot area*

Maximum Floor Area Ratio

1:3.0

Maximum Height of Building

15 meters for General Industry and 21 meters in case of

Information Technology, Textile, Knitwear and Sports Industry.

Note: Excluding mumty, parapet, lift room, chimneys, towers

like structures etc. and architectural features.

Setbacks around buildings

Front and rear setback

1/4th of the height of building or

2 m whichever is more

PUNJAB GOVT. GAZ. (EXTRA), JUNE 4, 2020 (JYST 14, 1942 SAKA)

561

Side setback

Side setback, if left at any point

of the building shall be 1/5th of

the height of the building or 1.5 m

whichever is more

Parking

General, Textile, Knitwear

1 ECS per 100 sq. meters of the

and Sports Industry

total covered area.

Information Technology

For Site Area upto 2 Acres: 1.0

Equivalent Car Space per 100

sq.m. of the total covered area.

For Site Area above 2 Acres: 2

Equivalent Car Space per 100

sq.m. of the total covered area

*5% additional ground coverage shall be permitted in case of retail service industry.

4.15

INDUSTRIAL FLATTED:

Table 3

Table is substituted by following:

Parameter

Permissible Limits

Minimum Site area

2000 sq. meters

Minimum Approach Road

18 meters

Maximum Ground Coverage

40 %

Maximum Floor Area Ratio

1:3

Maximum height of the Building

No Restriction subject to clearance from Airport Authority and

fulfillment of norms such as setbacks around building, ground

coverage, F.A.R., structural safety and fire safety norms.

Setbacks

Refer table 5.4: ‘Provision of exterior open spaces around the

buildings’ of Chapter 5 of PMBBL 2018

Parking

2.0 ECS /100 square meters of the total covered area.

Other controls for Industrial Buildings.-

(i)

Upto 15 percent of the total covered area in industrial buildings will be permissible for the housing of

staff and/or workers.

If any difficulties arise in implementation of these amendments in Punjab Municipal Building Bye Laws or

if any clarification or interpretation of these Bye Laws is required, Government shall be competent to issue

such clarification or remove such difficulties by way of notification.

Chandigarh

SANJAY KUMAR, IAS

The 3rd June, 2020

Additional Chief Secretary to Government of Punjab,

Department of Local Government, Punjab

2032/6-2020/Pb. Govt. Press, S.A.S. Nagar