Panaji, 2nd January, 2025 (Pausa 12, 1946)

SERIES I No. 40

Reg. No. RNP/GOA/32/2024-2026

RNI No. GOAENG/2002/6410

PUBLISHED BY AUTHORITY

Suggestions are welcomed on e-mail: dir–[email protected]

1781

INDEX

Department

Not./Corri./Ord./Proc.

Subject

Pages

Animal Husbandry

Not.- 6-2(2)/Veterinary College/

Objectives and functions of Goa College

1781

/Part-II/2024-25/5713

of Veterinary & Animal Sciences.

Archaeology

Not.- 8/377/2020/DAA-642

Notifying of Protected Monuments.

1783

Inspectorate of

Not.- VI/FAC-6(L-1)Part-1/

The Goa Factories (Seventeenth Amendment)

1784

Factories and Boilers

/IFB-23-24/3461

Rules, 2024.

General

Corr.- 23/1/87-GA&C(Vol. V)/

Corrigendum

1801

Administration

/5025

Law & Judiciary

Not.- 1-53-82/-LD(Estt.)/Part/

Substitution of figures.

1801

/2439

Personnel

Not.- 1/7/2014-PER

RRs.— Goa Medical College & Hospital.

1801

NOTE

There is an Extraordinary issue to the Official Gazette, Series I No. 39 dated 26-12-2024, namely:—

(1) Extraordinary dated 31-12-2024 from pages 1755 to 1780, Notification from Department of Planning regarding the Goa

Registration of Births and Deaths (Amendment) Rules, 2024.

GOVERNMENT OF GOA

Department of Animal Husbandry

Directorate of Animal Husbandry &

Veterinary Services

–––

Notification

6-2(2)/Veterinary College/Part-II/

/2024-25/5713

In pursuance to Government approval for

establishment of Goa College of Veterinary and

Animal Sciences, it is mandatory to define the

objectives and functions of the “Goa College

of Veterinary and Animal Sciences” as

detailed hereunder.

I. Objectives.— 1. To develop patterns of

teaching in Undergraduate and Post graduate

technical education in any or all the branches

of Veterinary and Animal Sciences.

2. To produce graduates of high quality

caliber in Veterinary Education.

3. To provide a platform for research in

any or all branches of Veterinary and Animal

Sciences.

4. To provide state of art facilities for

training of personnel in all important

branches of Veterinary and Animal Sciences.

5. To undertake studies for efficient animal

production, product handling and inspect

animal products to prevent public health

hazards through them.

6. To identify communicable diseases and

diseases of public health importance and

control them.

OFFICIAL GAZETTE — GOVT. OF GOA

SERIES I No. 40

2ND JANUARY, 2025

1782

7. To organize farmers seminar to appraise

and motivate for adoption of lab to land

transfer of technologies.

8. To provide and facilitate farm advisory

services.

9. To coordinate with State Government,

Indian Council of Agriculture Research

(ICAR), other research and development

sponsoring agencies in all aspects of

research, extension, training and other allied

matters related to Veterinary and Animal

Sciences.

II. Functions:— 1. To establish, maintain

and carry on the administration and

management of Goa College of Veterinary and

Animal Sciences.

2. To provide Undergraduate and Post

graduate instructions.

3. Research in any or all branches of

Veterinary and Animal Sciences for the

advancement of learning and dissemination

of Knowledge.

4. Exchange information and expertise

with other institutions, associations and

organizations in India and Abroad in the field

of education, research and extension.

5. Prescribe courses and curricula for both

Undergraduate and Post graduate studies

other than University Degree.

6. To make arrangements for courses for

University degree as in accordance with the

status and regulation of the University to

which the college is affiliated.

7. Prepare, print and publish any papers

or periodicals and hold seminars, workshops

and conferences in furtherance of the

objectives of the College.

8. Institute and award Scholarships,

fellowships prizes and medals in furtherance

of the objectives of the College.

9. Confer honorary awards or other

distinctions.

10. Accept gifts of movable or immovable

property that are necessary for the

furtherance of the objectives of the College.

11. Solicit, obtain or accept subscriptions,

donations, grants, gifts, devisees and trusts

from any person, firm, corporation or

institution provided that there is no conditions

or obligation attached to it and contrary to

the spirit of furtherance of the objectives of

the College.

12. Invite representatives of the State

Government,

Universities

and

other

organizations of India and foreign countries

and outstanding scientists to participate in

the programme of the College.

13.

Cooperate

with

national

and

international agencies engaged in veterinary

education, research and training and arrange

for interchange of personnel, material and

data.

14. Constitute Committee or Committees as

it may deem fit for the disposal of any

business of the College or for tendering advice

or any matter pertaining to the College.

15. Do all such other lawful acts and things

either alone or in conjunction with other

organizations or persons as the College may

consider necessary, incidental, or conducive

to achieve the objectives of the College.

16. To provide for and supervise the

residence, health, discipline and well-being

of the students of the College.

17. To provide for the maintenance of the

units of National Cadet Corps (NCC) for the

students of the College.

18. To propose the creation of post and

regulate recruitment of staff as per national

regulatory body and as per the Government

of Goa rules and regulations.

19. Appoint and hire services of Personnel

and pay them in return for the services

rendered.

20. College shall prepare the budget

estimate for every financial year by such a

date as fixed by the State Government

through the Directorate of Animal Husbandry

and Veterinary Services.

21. To prepare and submit the returns and

reports

the

Government

through

OFFICIAL GAZETTE — GOVT. OF GOA

SERIES I No. 40

2ND JANUARY, 2025

1783

Directorate of Animal Husbandry & Veterinary

Services.

22. Prepare and maintain accounts and

other relevant records and to prepare annual

statement of accounts including balance

sheet of the College as prescribed by the

Government.

23. The Dean shall be the Chief Academic

and Executive Officer of the College for

imparting of instructions and maintenances

of discipline there in. All other staff shall be

subordinate to the Dean. He shall be the

custodian of the records, the funds of the

college. In addition, the Dean shall perform

the duties as delegated or assigned by the

Government.

This issues with the approval of

Government vide U.O. No. 1130/F dated

22-11-2024.

By order and in the name of the Governor

of Goa.

Dr. Nitin S. Naik, Director & ex officio Jt.

Secretary (AH).

Panaji, 2nd December, 2024.

———uuu———

Department of Archaeology

–––

Notification

8/377/2020/DAA-642

In pursuance of rule 6 of the “Goa Ancient Monuments and Archaeological Sites and

Remains Rules, 1980”, the Government of Goa hereby notifies the Protected Monuments as

specified in column (3) of the Schedule below, wherein entry can be made only on payment

of the fee as specified in rule 6 of the said Rules, 1980.

SCHEDULE

Serial

District

Locality

Name of Monument

Part of monument

No.

for which payment

of fee is required

(1)

(2)

(3)

(4)

(5)

(1)

North Goa

Chapora (Kaisuv), Bardez

Chapora Fort

Entire monument.

(2)

North Goa

Alorna, Pernem

Fort of Alorna

Entire monument.

(3)

South Goa

Cabo De Rama, Canacona

Cabo da Rama Fort

Entire monument.

(4)

North Goa

Khorjuve, Bardez

Fortress of Khorjuve

Entire monument.

(5)

South Goa

Khandepar, Ponda

Caves at Khandepar

Entire monument.

(6)

South Goa

Colomb within Rivona

Site of Rock Carving

Entire monument.

Village Panchayat, Sanguem

at Pansaimal

(7)

North Goa

Naroa, Divadi, Tiswadi

Site of the temple of

Entire monument.

Saptakoteshwar

(8)

North Goa

St. Estevam, Tiswadi

Site of Fortress at

Entire monument.

St. Estevam

(9)

South Goa

Vasco, Marmagoa

Fort of Marmagoa

Entire monument.

(10)

North Goa

Sanquelim, Bicholim

Fort of Sanquelim

Entire monument.

(11)

North Goa

Old Goa, Tiswadi

Chapel of Our Lady

Entire monument.

of Monte

This Notification shall come into force on the date of its publication in Official Gazette.

By order and in the name of the Governor of Goa.

Dr. Nilesh B. Fal Dessai, Director of Archaeology & ex officio Joint Secretary.

Panaji, 24th December, 2024.

OFFICIAL GAZETTE — GOVT. OF GOA

SERIES I No. 40

2ND JANUARY, 2025

1784

Inspectorate of Factories and Boilers

–––

Notification

VI/FAC-6(L-1)Part-1/IFB-23-24/3461

Whereas, the draft Rules, namely, the Goa Factories (Seventeenth Amendment) Rules, 2024

which the Government of Goa proposed to make in exercise of the powers conferred by Section

112 of the Factories Act, 1948 (Central Act No. 63 of 1948), so as to further amend the Goa

Factories Rules, 1985, were pre-published as required by Section 115 of the said Act vide the

Government Notification No. VI/FAC-6(L-1)Part-1/IFB-23-24/1758 dated 22-07-2024 of the

Inspectorate of Factories and Boilers, in the Official Gazette, Series I No. 17 dated 25-07-2024,

inviting objection and suggestion from all persons likely to be affected thereby within a period

of forty-five days from the date of publication of the said Notification in the Official Gazette;

And whereas, the said Official Gazette was made available to the public on 25th July, 2024;

And whereas, the objections and suggestions received from the public on the said draft

Rules have been considered by the Government.

Now, therefore, in exercise of the power conferred by Section 112 of the Factories Act, 1948

(Central Act No. 63 of 1948) and all other power enabling it in this behalf, the Government of

Goa hereby makes the following rules, namely:—

1. Short title and commencement.— (1) These rules may be called the Goa Factories

(Seventeenth Amendment) Rules, 2024.

(2) They shall come into force on the date of their publication in the Official Gazette.

2. Amendment of rule 6.— In sub-rule (2) of rule 6 of the Goa Factories Rules, 1985 (hereinafter

referred to as the “principal Rules), for the Schedule, the following Schedule shall be substituted,

namely:—

“SCHEDULE

Scale of fees payable for licence and annual renewal of licence by Factories

Maximum number of workers to be employed on any day during the year

Upto

From

4001

10 to

21 to

51 to

151 to

251 to

501 to

1001 to

2501 to

and

150

250

500

1000

2500

4000

above

Rs.

Nil

420

735

3150

4400

8800

17600

35200

52800

69300

Upto 10

630

1155

2835

6300

8800

13200

26400

52800

69300

85800

Above 10 but

840

3150

4200

8400

13200

17600

35200

64900

79200

94600

not above 50

Above 50 but

3150

4200

6300

12600

17600

26400

44000

77000

85800 103400

not above 100

Above 100 but

6300

7350

10500

25200

35200

44000

64900

85800 103400 119900

not above 500

Above 500 but

11000

12100

22000

35200

48400

57200

85800

103400 119900 137500

not above 1000

Quality of H.P.

Installed

(Maximum H.P.)

OFFICIAL GAZETTE — GOVT. OF GOA

SERIES I No. 40

2ND JANUARY, 2025

1785

Above 1000 but

15400

20900

28600

48400

57200

69300

94600

119900 137500 160600

not above 2000

Above 2000 but

20900

28600

48400

57200

69300

94600 119900

137500 160600 174900

not above 5000

Above 5000 but

30800

40700

71500

84700

103400 141900 189200

217800 233200 261800

not above 10000

Above 10000

45100

61600 106700 125400

160600 217800 276100

320100 348700 392700

Note:- (1) In respect of application made through online

mode, fees shall be paid through e-challan

payment gateway.

(2) Fees payable under this rule shall be increased

by five percent of such fees last payable, at

the beginning of each calendar year with effect

from 01-01-2026.”.

3. Substitution of rule 8.— For rule 8 of the

principal Rules, the following rule shall be

substituted, namely:—

“8. Amendment of licence.— (1) A licence

under rule 7 may be amended by the Chief

Inspector.

(2) A licensee shall be required to have

his licence amended if there is change in

the name of the factory or change in the

organization status or revision in the site

on which the factory is situated or by virtue

of addition or deletion to the premises in

which the factory is situated or change in

the manufacturing process, or addition of

new process or deletion of process, or if

the factory, for which the licence is

granted, exceeds the limits specified in the

licence in regard to horse-power or the

number of workers employed.

(3) The licensee whose licence is

required to be amended under sub-rule

(2), shall submit to the Chief Inspector

an application in Form No. 2 duly filled

in and signed stating the nature

of the amendment along with applicable

documents as per annexures to Form

No. 2. Where application for the amendment

of licence is duly made in accordance with

these rules, the Chief Inspector shall within

a period of twenty-one days from the date

of receipt of application, amend the license

or refuse the amendment thereof specifying

the reasons therefor failing which the

factory in respect of which the licence is

to be amended shall be deemed to be duly

amended:

Provided that no amendment of the

licence shall be necessary in respect of

changes in the number of workers or

horse-power or both unless such changes

involve higher licence or renewal fee.

Explanation.— For the purpose of this

rule, change in the manufacturing process,

or addition of new process or deletion of

process shall not include change which

does not result in change in the category

the

finished

products

being

manufactured. However, any such change,

which results in change or addition or

deletion of raw materials being used, the

same shall be intimated, alongwith the

complete details of the raw materials added

or deleted, to the Chief Inspector at least

fifteen days before such change.

(4) Where a licence is required to be

amended under sub-rule (2) is for—

(a) change in the name of the factory

or change in the organization status, the

fee to be paid for such amendment shall

be five hundred rupees;

(b) change in the name of the factory

due to acquisition or merger taking place,

the application for amendment of license

and notice of occupation shall be given

by the new occupier in whose name the

license is to be transferred and the fee

to be paid for such amendment shall be

five thousand rupees;

factory is situated by virtue of addition

OFFICIAL GAZETTE — GOVT. OF GOA

SERIES I No. 40

2ND JANUARY, 2025

1786

or deletion to the premises in which the factory is situated, the fee to be paid for such

amendment shall be five hundred rupees;

(d) change in the manufacturing process, or addition of new process or deletion of

process, the fee to be paid for such amendment shall be five hundred rupees; and

(e) exceeding the limits specified in the licence in regard to horse-power or the number

of workers employed, the fee to be paid for such amendment shall be equal the difference

between the licence or renewal fees due on the basis of the higher number of workers

and horse power and the fees for the grant of licence or renewal thereof already paid

for the year or part thereof.”.

4. Amendment of rule 11.— In rule 11 of the principal Rules, sub-rules (3) and (4) shall be

omitted.

5. Amendment of rule 90 O.— In rule 90 O of the principal Rules, in sub-rule (2), for the

expression “or three months certificate course in Associate Fellow of Industrial Health offered

by the Directorate General of Factory Advice Services and Labour Institute (DGFASLI)

Mumbai”, the expression “or three months certificate course in Associate Fellow of Industrial

Health offered either by the Directorate General of Factory Advice Services and Labour

Institute (DGFASLI) Mumbai or an Institute approved by the Central Government/any State

Government/Union Territory Administration, in accordance with the guidelines issued by

DGFASLI” shall be substituted.

6. Amendment of rule 95.— In rule 95 of the principal Rules, in sub-rule (1), in the proviso,

for the expression “or a three months certificate course in Associate Fellow of Industrial

Health offered by the Directorate General Factory Advice Services and Labour Institutes,

Mumbai”, the expression “or three months certificate course in Associate Fellow of Industrial

Health offered either by the Directorate General of Factory Advice Services and Labour

Institute (DGFASLI) Mumbai or an institute approved by the Central Government/any State

Government/Union Territory Administration, in accordance with the guidelines issued by

DGFASLI” shall be substituted.

7. Substitution of Form No. 1.— For Form No. 1 to the principal Rules, the following Form

shall be substituted, namely:—

“FORM No. 1

(See rule 3)

Application for Approval of Plans to Construct, Extend or take into use

any Building as a Factory or Revision in Plant and Machinery Layout

or Revision in Site on which the Factory is situated

(1) Application for - (Tick one or more, as applicable)

(a) Constructing a new building

_______________________

(b) Extending the existing building

_______________________

(d) Revision in Plant and Machinery Layout

_______________________

(e) Revision in site on which factory is situated :

_______________________

(2) Occupier’s details in block letters

(a) Full Name

_______________________

(b) Residential Address

_______________________

OFFICIAL GAZETTE — GOVT. OF GOA

SERIES I No. 40

2ND JANUARY, 2025

1787

_______________________

Phone No. _____________

Mobile No. _____________

e-mail id. ______________

(3) Full name and postal address of factory including Phone No.

(a) Name

M/s. ___________________

_______________________

(b) Address

_______________________

Phone No. _____________

e-mail id. ______________

(4)(a) Whether already registered as a factory

Yes/No

(b) If yes,

(i) Registration No.

_______________________

(ii) Licence No.

GOA/__________________

(iii) Valid upto

_______________________

Yes/No

If yes, date of start

_______________________

(d) Has the construction work been completed?

Yes/No

If yes, date of completion.

_______________________

(e) Has the manufacturing process commenced?

Yes/No

If yes, date of commencement

_______________________

(f) How many workers were employed on the

first day of the commencement of the

manufacturing process?

_______________________

(g) From which date you are employing more

than 19 workers with the aid of power or

more than 39 workers without the aid of

power?

_______________________

(h) What is/will be the maximum number of

Male - ______

workers employed per day? (Maximum,

Female - _____

counting all shifts in the entire factory)

(i) What is/will be the maximum number of

Male - ______

workers working in the entire factory at

Female - _____

any one time?

(j)

Does it fall in THE FIRST SCHEDULE under

Yes/No

section 2 (cb) of the Factories Act, 1948.

OFFICIAL GAZETTE — GOVT. OF GOA

SERIES I No. 40

2ND JANUARY, 2025

1788

If yes, state the category as per THE FIRST

_______________________

SCHEDULE of the Factories Act, 1948.

(Details given in Annexure V hereto).

(k) Dangerous Manufacturing Process or

Sr.

Schedule No.

No. of

Operation carried on or to be carried on

No.

as per Rule

workers

as per rule 131 of the Goa Factories Rules,

131

1985 along with No. of workers proposed

to be/engaged in each dangerous

manufacturing process or operation

(Details given in Annexure VI hereto)

(5) Other Particulars:

(i) Permission/Approval/NOC from Local

Authority i.e. Municipal Corporation or

Council/Panchayat/Goa Industrial Develop-

ment Corporation along with photo copy of

approved plans (in case of construction,

extension or taking into use any building

as a factory).

_______________________

(ii) Approval from Goa State Pollution Control

Board as under:-

(a) For new factories, Consent to Establish

_______________________

(b) For existing factories, Consent to Operate

_______________________

and Hazardous Waste Authorization

(iii) Approval/License from Petroleum and

Explosives Safety Organization in case of

factories using/manufacturing/storing

explosives, flammable or non-flammable or

toxic or non-toxic compressed gas, petroleum

product or any other inflammable

substance.

_______________________

(iv) List of directors/partners in case of company/

/firm with their permanent address and

telephone numbers.

_______________________

(v) Board Resolution appointing one of the

Directors/Resolution appointing one of the

Partners as Occupier of the factory as per

Annexure-I hereto.

_______________________

(vi) Ownership documents of the premises i.e.

Sale Deed/Lease Deed/Sub-Lease Deed/Leave

& License Agreement.

_______________________

(vii) List of raw material(s) used in the manu-

facturing process.

_______________________

(viii) List of finished products manufactured in

the factory.

_______________________

(ix) Schematic flow chart of the manufacturing

process.

_______________________

OFFICIAL GAZETTE — GOVT. OF GOA

SERIES I No. 40

2ND JANUARY, 2025

1789

(x) Brief description of the manufacturing

_______________________

process.

(xi) List of chemicals/oils/solvents/gases that

_______________________

are stored, produced or discharged to be

given as per Annexure-II hereto.

(xii) Statistical data to be submitted as per

Annexure-III hereto (to be obtained from

Architect/Engineer)

_______________________

(xiii) Stability Certificate of the building/shed/

/structure/work of engineering construction

in case of completion of construction work.

(to be obtained from Competent Person as

defined under Rule 5)

_______________________

(xiv) (i) List of machineries/equipment’s with

their power rating in HP

_______________________

(ii) List of other power/steam generating

equipment’s along with their details.

_______________________

(xv) Risk Analysis Report in case of Major Accident

Hazard installation/Chemical Unit. (For new

factories and in case of existing factories

if there is any change)

_______________________

(xvi) Plans in duplicate in blue print/CAD print :

Yes/No

signed by the occupier in original submitted

in hard format. (Refer Annexure-IV hereto

for guidelines of plan preparation)

Rubber stamp and Signature of the Occupier: _________________

Name of Occupier: _________________________________________

(in block letters)

Date:-

Notes: (1) Applicant shall be the occupier of the factory, as specified under the following circumstances:-

(a) The proprietor of proprietary concern, or

(b) Anyone of the individual partners of the firm by consent from all other partners.

(d) The person appointed by notification to manage the affairs of the factory, owned or controlled by the

Central Government or State Government or a local authority.

(2) The application in this Form is not valid after 3 months from the date of submission, if plans are not

approved.

(3) Application made by a person other than the occupier of a factory will not be entertained.

OFFICIAL GAZETTE — GOVT. OF GOA

SERIES I No. 40

2ND JANUARY, 2025

1790

ANNEXURE - I

Resolution

Extract of the Resolution passed in the Board of Directors Meeting/Partners Meeting held on

……………………… At ………………………….

Resolved that Shri ………………………………………………………………............ Director of the Company is

nominated as ‘Occupier’ for the Company’s factory at Plot No. ………………………………………… Goa, for the

purpose of the Factories Act, 1948 (Central Act No. 63 of 1948) and the Rules framed thereunder.

Certified by Company Secretary or Chairman

_______

ANNEXURE-II

Details of Oil/Solvents/Petroleum Products/Chemicals/Gases

those are Stored, Produced or Discharged

Sr.

Name of the

Physical

Maximum Type/Mode

Flash

Flammability

Toxicity

Exposure

Method of

No.

raw material/

state at

quantity

of storage

point

handling

/chemical/solvent

ambient

stored at

in ^oC

during

etc.

temp.

a time in

manufactu-

factory

ring process

(1)

(2)

(3)

(4)

(5)

(6)

(7)

(8)

(9)

(10)

Raw materials

Intermediate

products

Finished

products

Name and Signature of the Occupier

Date:

OFFICIAL GAZETTE — GOVT. OF GOA

SERIES I No. 40

2ND JANUARY, 2025

1791

Sr. No. of work room, office

room, etc. marked on plan

Name of room in factory

Length, breadth and height

(all in metres of each room)

Total volume of each room in

cubic metres

Total volume occupied by

machinery of each room in

cubic metres

Floor area occupied by

machinery in square metres

Breathing space in cubic

metres

No. & size of door

No. & sizes of window

opening in the outer wall (at

working level)

No. & size of ventilation &

other roof opening (above

working level)

Total area of windows and

doors in the outer wall in

square metres (8+9)

Total area of opening above

working level in square

metres

Maximum No. of persons

who may be employed in the

room at a time

Other remarks if any with

respect of special

arrangements made for

ventilation

ANNEXURE - III

Statistical Data

(1)

(2)

(3)

(4)

(5)

(6)

(7)

(8)

(9)

(10)

(11)

(12)

(13)

(14)

NOTE:— Breathing space of at least 14.2 cubic metres shall be provided for every worker employed in that

room and no account shall be taken of any space which is more than 4.2 mts. above the level of the

floor of the room, for calculating the breathing space.

Signature of Architect/Engineer preparing the plans.

_______

ANNEXURE-IV

For Reference of Occupier/Engineer/Architect-Guidelines

for Preparing Plans

(1) Shall be submitted in blue print drawing or CAD print.

(2) Shall be in duplicate.

(3) Shall be signed by Occupier and the Engineer/Architect indicating his registration number with

rubber stamp.

(4) Shall be drawn to scale, suitably dimensioned.

(5) The site and block plan must be drawn to a scale of 1cm = 5 mts. with North direction shown.

(6) The scale of building plans, elevations, equipment, layout, cross sections, must be drawn to a scale

of 1cm = 1mt.

(7) All dimensions shall be in metric systems.

(8) Shall be prepared by a person having requisite qualifications such as an Architect registered with

the Institution of Architects or Registered Engineer. Name and address of the Engineer/Architect

to be given.

(9) Site plan shall show immediate surroundings including adjacent buildings and other structures,

roads, drains, etc., factory boundary shall be shown in green including all its premises and precincts

therein.

Layout Plans

(10) Shall show all the departments, sections, aisles, stairs, floor openings, pits, reservoir sumps, tanks,

boiler house, coal yard, generator room, effluent plant, work benches, workshop, passageways through

the working room, etc. giving access to the means of escape in the case of fire and emergency.

OFFICIAL GAZETTE — GOVT. OF GOA

SERIES I No. 40

2ND JANUARY, 2025

1792

(11) Shall show placement of machinery and equipment, including lifting machines, pressure plants,

furnace, etc., indicating the distance of at least 1mt. between the machines, machines and adjacent

walls, pillars, etc.

(12) Shall show location of all the statutory facilities like latrines, urinals and washing facilities, cloak

room, canteen, rest/shelter room, lunch room, first aid room, drinking water centre’s, spittoons, etc.,

clearly marked and detailed plans with respect to each of these facilities.

(13) Shall show all figures, dimensions, specifications, distances and necessary schedules of doors and

windows, machineries and equipments on plans at proper places.

(14) Shall show proposed changes of additions and alterations in the following distinctive colours:-

(i) Proposed extension in pink colour.

(ii) Proposed demolition in yellow colour.

Technical Specifications for Factory Buildings

(1) Site:—

While considering the factory site, it shall be ensured that the proposed factory does not create any

nuisance to the neighborhood including adjacent industries or the general population. In case a

factory generating trade waste and effluents, then the care shall be taken to see that the same are

disposed off in a manner approved by the Goa State Pollution Control Board.

In case of industrial units having a potential danger of creating a major hazard that the factory shall

ensure that there is a green zone/clear distance around the factory including as per the directions

given by the Court in regard to location safety aspects of factories.

(2) Floor:—

(i) Floor shall be cemented.

(ii) There shall be mastic flooring in flammable areas to eliminate sparks.

(3) Height:—

(i) Height of the building will vary depending upon the manufacturing process. However minimum

height from floor to the lowest point of the roof shall not be less than 3.75 mts.

(ii) For spans of building upto 12 mts. the height shall not be less than 3.75 mts. for spans between

12-21 mts. the height shall not be less than 4.25 mts.

(iii) In case of A/c rooms lesser height upto 2.12 mts. could be accepted depending upon the number

of workers employed, size of the room, processes carried out, standby power supply, etc.

(4) Windows and Skylights:—

(i) Sill height of windows at working level shall not be more than 1 mt.

(ii) Windows shall be fully openable outwards.

(iii) Shall not be less than 152.5 x 91.5 cms.

(iv) Distance between the centres of consecutive windows shall not exceed 2.4 mts.

(v) If natural lighting is inadequate, sufficient number of transparent sheets or glass tiles shall be

provided.

(vi) For building over 3.75 mts. height, every additional 3.75 mts. height is considered as one floor for

providing additional openings.

(5) Doors:—

(i) Minimum size shall be 205 cms. x 120 cms.

(ii) Opening outside in the direction of nearest exit.

(6) Emergency Exit:—

(See rule 73 (10) of the Goa Factories Rules, 1985)

OFFICIAL GAZETTE — GOVT. OF GOA

SERIES I No. 40

2ND JANUARY, 2025

1793

(i) At least one for every room

(ii) Shall provide free and unobstructed passage.

(iii) Travel distance to the exit shall not be more than 30 mts.

(iv) In case of those factories where high hazard materials are stored or used, the travel distance to

the exit shall not exceed 22.5 mts.

(v) If any part of the factory building is above or below the level of the ground floor, then two or more

external, separate and substantial stairways of fireproof material shall be provided at diagonally

opposite levels to provide direct access to the ground floor.

(vi) Stairway shall not have angle greater than 45^o to the horizontal and width less than 90 cms.

(7) Breathing Space:—

Breathing space of 14.2 cubic mts./worker is required. Actual height upto 4.2 mts. shall only be taken

into account for calculating the breathing space (See Annexure-IV).

(8) Overcrowding:—

(i) Space for free movement.

(ii) In power factories at least 3.3 sq.mts. space is required for each worker.

(iii) Non-power factories, space required is 1.5-2.3 sq. mts. Space occupied by machinery and other

fixtures not to be considered.

(iv) For workers who squate on the floor and work, space required per worker is 1.47 sq. mts. in

addition to the space required for free movement.

(9) Spacing of Machinery:—

Minimum 1 meter distance is to be allotted in between machinery and fixtures like planers, etc. whose

traverse of the bed is towards the wall, then a clear space of at least 45 cms. between the wall and the

maximum traverse of the bed with the largest size of the object to be turned shall be left.

(10) Ventilation:—

(See rule 24 of the Goa Factories Rules, 1985)

(i) Ventilation standard specified in the Act and the Rules thereunder shall generally be

adhered to.

(ii) Openings in the wall shall be at least more than 15% of the floor area.

(iii) Minimum air movement-30 mts./min.

(iv) (a) every 3.75 mts. height is considered as one floor area.

(b) only openable window area is taken in consideration for ventilation.

(v) Ridge ventilators shall be provided for the full length of the roof.

(vi) Roof extractors, ventilation cowl to be provided.

(vii) Openings or openable ventilators needed for each bay of north light roof.

(11) Mezzanine Floor:—

(i) Sufficient head room over all working platforms is needed.

(ii) Platforms and stepways above floor level shall be provided with hand rails on all the sides and

toe boards.

(12) Exhaust:—

Effective dust/fume/heat extraction system is necessary for local exhaust wherever painting

buffing, heat processes, etc., are involved. Details of systems adopted to remove heat, dust, fume,

vapour, smoke, gases, air-borne contaminants, radio-active waste, etc. shall be given and shall

be shown in plans.

(13) Illumination and Electrical Fittings:—

(i) Standard of lighting shall be as per ISI specifications (See Rule 37 of the Goa Factories Rules, 1985).

OFFICIAL GAZETTE — GOVT. OF GOA

SERIES I No. 40

2ND JANUARY, 2025

1794

(ii) All wiring shall be of industrial type.

(iii) Flame-proof wiring and fittings to be provided in explosive environment.

(14) Sanitary Facilitites:—

(See Rules 47 to 56 of the Goa Factories Rules, 1985)

(i) Separately for male and female workers.

(ii) Independent entry for male and female workers.

(iii) Well distributed in convenient places.

(iv) In following number:-

(a) Latrines:-

One for every 25 upto 100 workers and thereafter one for every 50 workers.

(b) Urinals:-

One for every 50 upto 500 workers and thereafter one for every 100 workers.

(15) Washing Facilitites:—

(See Rule 91 of the Goa Factories Rules, 1985)

(i) Separately for male and female workers.

(ii) Independent entry for male and female workers.

(iii) Well distributed in convenient places.

(iv) In following number:-

(a) Wash places:-

One for every 20 upto 200 workers and thereafter one for every 50 workers.

(b) Bathrooms:-

One for every 25 upto 100 workers and thereafter one for every 50 workers.

(16) Arrangement for Drying of Wet Clothing and Keeping Clothing:—

(Applicable to factories listed under Rule 92 of the Goa Factories Rules, 1985.)

Separately for male and female workers.

(17) Canteen:—

(Applicable to factories employing 250 and more workers. See rule 96 of the Goa Factories

Rules, 1985.)

(i) 1 sq. mt. per worker.

(ii) To accommodate 30% workers working at a time.

(iii) 15 mts. away from source of obnoxious dust, fumes or smoke, coal-stack, latrines, urinals, boiler

house, ash dumps, noisy areas, etc.

(iv) Sufficiently lighted.

(v) Floor and inside walls upto a height of 1.2 mts. from the floor shall be of smooth and impervious

material.

(vi) Minimum height shall be 3.75 mts.

(18) Shelter/Rest Room and Lunch Room:—

(Applicable to those employing 150 and more workers).

(See rule 103 of the Goa Factories Rules, 1985.)

(i) In addition to dining hall required under section 46.

(ii) 1.12 sq. mts. of floor area per worker.

(iii) Heat resistant material for wall and roof.

(iv) Minimum height shall be 3.75 mts.

OFFICIAL GAZETTE — GOVT. OF GOA

SERIES I No. 40

2ND JANUARY, 2025

1795

(19) Creche:—

(Applicable when female employment is 30 and more).

(See Rule 104 of the Goa Factories Rules, 1985.)

(i) 2 sq. mts. of floor area for child required.

(ii) Washing arrangement for children.

(iii) Sanitary facilities.

(iv) Cupboard for storage.

(v) Room for the nurse.

(vi) Playground suitably fenced.

(vii) Arrangement for storing milk, food, etc.

(viii) Mother’s feeding room.

(ix) Minimum height shall be 3.75 mts.

(x) Shall be away from source of obnoxious dust, fumes or smoke, coal-stack, latrines, urinals, boiler

house, ash dumps, noisy areas, etc.

(20) Ambulance Room:—

(Applicable when 500 and more workers are employed)

(See rule 95 of the Goa Factories Rules, 1985.)

(i) Minimum area 24 sq. mts.

(ii) Floor and walls of smooth, hard and impervious material.

(iii) Doctor’s examination room.

(iv) Sitting room for visitors.

(v) Latrines, urinals and wash places.

(21) Drinking Water:—

(See rule 41 to 46 of the Goa Factories Rules, 1985.)

(i) 5 lts./worker/day.

(ii) Public water supply.

(iii) Any other source approved by Health Authorities.

(iv) One water centre for every 150 workers.

(v) One on each floor.

(22) Fire Fighting Arrangement:—

(See rule 73 of the Goa Factories Rules, 1985.)

(i) Fire hydrant in the form of 15 cms. diameter pipe to supply 500 lts. of water per minute, at a pressure

not less than 7 kgs./sq. cms., to give flow for 100 minutes. Hydrant point shall be positioned at

convenient location from store and other areas.

(ii) Fire extinguishers, fire buckets, etc.

(23) Decontamination Facilities:—

Decontamination facilities shall be provided in accordance with rule 90 Q of the Goa Factories

Rules, 1985.

OFFICIAL GAZETTE — GOVT. OF GOA

SERIES I No. 40

2ND JANUARY, 2025

1796

ANNEXURE - V

The First Schedule

(See section 2(cb) of the Factories Act,1948)

List of Industries Involving Hazardous Processes

(1) Ferrous metallurgical Industries

- Integrated Iron and Steel

- Ferro-alloys

- Special Steels

(2) Non-ferrous metallurgical Industries

- Primary Metallurgical Industries, namely, zinc, lead, copper manganese and aluminium

(3) Foundries (ferrous and non-ferrous)

- Castings and forgings including cleaning or smoothing/roughening by sand and shot blasting.

(4) Coal (including coke) Industries.

- Coal, Lignite, Coke, etc.

- Fuel Gases (including Coal gas, Producer gas, Water gas)

(5) Power Generating Industries

(6) Pulp and Paper (including paper products) Industries

(7) Fertilizer Industries

- Nitrogenous

- Phosphatic

- Mixed

(8) Cement Industries

- Portland Cement (including slag cement, puzzolona cement and their products)

(9) Petroleum Industries

- Oil Refining

- Lubricating Oils and Greases

(10) Petro-chemical Industries

(11) Drugs and Pharmaceutical Industries

- Narcotics, Drugs and Pharmaceuticals

(12) Fermentation Industries (Distilleries and Breweries)

(13) Rubber (Synthetic) Industries

(14) Paints and Pigment Industries

(15) Leather Tanning Industries

(16) Electro-plating Industries

(17) Chemical Industries

- Coke Oven by-products and Coaltar Distillation Products

- Industrial Gases (nitrogen, oxygen, acetylene, argon, carbon-dioxide, hydrogen, sulphur-dioxide,

nitrous oxide, halogenated hydro-carbon, ozone etc.)

- Industrial Carbon

- Alkalies and Acids

- Chromates and dichromates

- Leads and its compounds

- Electrochemicals (metallic sodium, potassium and magnesium, chlorates, perchlorates and

peroxides)

- Electrothermal produces (artificial abrasive, calcium carbide)

- Nitrogenous compounds (cyanides, cyanamides and other nitrogenous compounds)

OFFICIAL GAZETTE — GOVT. OF GOA

SERIES I No. 40

2ND JANUARY, 2025

1797

- Phosphorous and its compounds

- Halogens and Halogenated compounds (Chlorine, Fluorine, Bromine and Iodine)

- Explosives (including industrial explosives and detonators and fuses)

(18) Insecticides, Fungicides, Herbicides and other Pesticides Industries

(19) Synthetic Resin and Plastics

(20) Man-made Fibre (Cellulosic and non-cellulosic) Industry

(21) Manufacture and repair of electrical accumulators

(22) Glass and Ceramics

(23) Grinding or glazing of metals

(24) Manufacture, handling and processing of asbestos and its products

(25) Extraction of oils and fats from vegetable and animal sources

(26) Manufacture, handling and use of benzene and substances containing benzene

(27) Manufacturing processes and operations involving carbon disulphide

(28) Dyes and Dyestuff including their intermediates

(29) Highly flammable liquids and gases.

_______

ANNEXURE - VI

(See rule 131 of the Goa Factories Rules, 1985)

Schedules to said rule 131 Dangerous manufacturing processes or operations

(1)

Schedule I

Manufacture of aerated water and processes incidental thereto.

(2)

Schedule II

Electrolytic plating or oxidation of metal articles by use of an electrolyte

containing chromic acid or other chromium compounds.

(3)

Schedule III

Manufacture and repair of electric accumulators.

(4)

Schedule IV

Glass manufacture

(5)

Schedule V

Grinding or glazing of metals

(6)

Schedule VI

Manufacture and treatment of lead and certain compounds of lead.

(7)

Schedule VII

Generating petrol gas from petrol

(8)

Schedule VIII.

Cleaning or smoothing, roughening, etc. of articles by a jet of sand, metal

shot or grit or other abrasive propelled by a blast of compressed air or

steam.

(9)

Schedule IX

Liming and tanning of raw hides and skins and processes incidental

thereto.

(10)

Schedule X

Certain lead processes carried on in printing presses and type foundries.

(11)

Schedule XI

Manufacture of pottery.

(12)

Schedule XII

Chemical works

(13)

Schedule XIII

Manufacture of articles from refractory materials.

(14)

Schedule XIV

Handling and processing of asbestos, manufacture of any article of asbestos

and any other process of manufacture or otherwise in which asbestos is

used in any form.

(15)

Schedule XV

Handling or manipulation of corrosive substances.

(16)

Schedule XVI

Processing of cashew nuts

(17)

Schedule XVII

Compression of oxygen and hydrogen produced by the electrolysis of

water.

(18)

Schedule XVIII

Process of extracting oils and fats from vegetables and animal sources in

solvent extraction plants.

(19)

Schedule XIX

Manufacture or manipulation of manganese and its compounds.

OFFICIAL GAZETTE — GOVT. OF GOA

SERIES I No. 40

2ND JANUARY, 2025

1798

(20)

Schedule XX

Manufacture or manipulation of dangerous pesticides.

(21)

Schedule XXI

Manufacture, handling and usage of benzene and substances containing

benzene.

(22)

Schedule XXII.

Manufacturing process or operations in carbon disulphide plants.

(23)

Schedule XXIII

Manufacture or manipulation of carcinogenic dye intermediates.

(24)

Schedule XXIV

Operations involving high noise levels.

(25)

Schedule XXV

Manufacture of Rayon by Viscose Process.

(26)

Schedule XXVI

Handling and Processing of Highly Flammable liquids and flammable

compressed Gases.

(27)

Schedule XXVII

Operations in Foundries

(28)

Schedule XXVIII

Fireworks manufactories and match factories

(29)

Schedule XXIX

Manipulation of stone or any other material containing free silica.”.

8. Substitution of Form No. 2.— For Form No. 2 of the principal Rules, the following Form shall be

substituted, namely:—

“FORM No. 2

(See rules 6, 8, 11 and 15)

Application for Registration and Grant of License and/or Notice of Occupation or Amendment of

Licence or Transfer of License

Application for (Tick one or more, as applicable)

(a) Registration, Grant of Licence and/or Notice of Occupation : ………………………………............

(b) Amendment of license for

(i) Change in name of the factory due to acquisition or

: ………………………………............

merger or any other reasons to be specified

(ii) Addition/Deletion of the Manufacturing process/Product : ………………………………............

(iii) Increase/Decrease in maximum number of workers

: ………………………………............

on any day

(iv) Increase/Decrease in installed power

: ………………………………............

(v) Addition/Deletion of the premises

: ………………………………............

Last plan approval No. and date granted by Chief Inspector

: ………………………………….......

(a)

Name and complete residential address of the occupier,

that is–

(a) the proprietor; OR

: ………………………………….......

(b) one of the partners of the firm appointed by

Resolution; OR

: ………………………………….......

Resolution; OR

: ………………………………….......

(d) the person appointed to manage the affairs of the

factory owned or controlled by Central Government or

State Government or local authority; OR

: ………………………………….......

(e) any other (specify)

: ………………………………….......

(b) (i) Full name and postal address of the factory with

: ………………………………….......

Pin Code

(ii) Telephone No.

: ………………………………….......

(iii) e-mail id

: ………………………………….......

OFFICIAL GAZETTE — GOVT. OF GOA

SERIES I No. 40

2ND JANUARY, 2025

1799

Yes/No

(ii) If yes, registration No.

: ………………………………….......

(iii) Licence No.

: GOA/………………………….........

(iv) If no, date from which amenable under Factories Act,

: ………………………………….......

1948

Full name and address of the owner of the premises or

: ………………………………….......

building (including the precincts thereof) referred to in

: ………………………………….......

section 93.

: ………………………………….......

Full name and residential address of the person who shall be

the manager of the factory for the purposes of the Act

: ………………………………….......

(a) In case of application for registration and grant of license

Yes/No

and/or Notice of Occupation, documents as per Annexure I

annexed to this form enclosed

(b) In case of application for amendment of license, applicable :

Yes/No

documents as per Annexure II annexed to this form

enclosed

Yes/No

change of occupier, applicable documents as per

Annexure III annexed to this form enclosed

Number of workers employed in the factory- Employed in the Proposed to be

last 12 months employed in

next 12 months

(a) Maximum number

: ……………... …………….......

(b) Number ordinarily employed*

: ……………... …………….......

Total amount of installed power in HP-

: …………………………………….

Signature of the Occupier :

Full Name (in block letters) : ……………………………………………………………………

Telephone

Mobile

e-mail

No.: ……………….

id: …………………………………..

Signature of the Manager:

Full Name (in block letters) : ……………………………………………………………………

Telephone

Mobile

e-mail

No.: ……………….

id: …………………………………..

Dated:……………………

NOTE:

(1) This form shall be completed in block letters.

(2) If power is not used at the time of filling up this Form but introduced later, the fact shall be

communicated to the Chief Inspector of Factories.

(3) The term ‘ordinarily employed’ would mean the total number of workers working in all the shifts

which shall be over 50% of the working days in the factory.

ANNEXURE – I

For Registration and Grant of License and/or Notice of Occupation

(1) Letter of approval of plans granted by Chief Inspector

(2) Evidence (objective/documentary) in respect of compliance to the conditions laid, if any, at the time

of approval of plans.

OFFICIAL GAZETTE — GOVT. OF GOA

SERIES I No. 40

2ND JANUARY, 2025

1800

ANNEXURE - II

A. For change in name of factory

(1) Court Order for acquisition/merger (in case of company)

(2) Certificate of Incorporation issued by Registrar of Companies for change in name (in case of company)

(3) Purchase/Sale Agreement (other than in case of acquisition/merger)

(4) List of current Directors/Partners issued by Registrar of Companies/Registrar of Firms

(5) Board Resolution/Resolution appointing applicant Director/Partner as the Occupier duly signed by

all Directors/Partners or certified by Company Secretary (in case of Company) along with reg. No. &

seal.

(6) NOC issued by Local Authority/GIDC for change in name of the factory

(7) Declaration from the applicant Director/Partner/Proprietor stating that there is no change in the

previously approved building/shed/structure, plant & machinery layout and the process/product.

B. Addition/deletion of manufacturing process/product

(1) Letter of approval of plans granted by Chief Inspector for revision in plant & machinery layout for

addition/deletion of the process/product.

(2) List of products/processes carried out before addition/deletion

(3) List of products/processes carried out after addition/deletion

(4) Product/process wise name and quantities of raw materials to be used, intermediate products and

principal finished products to be produced after addition or deletion

(5) NOC issued by GSPCB (in case of addition of the process/product)

C. Increase/Decrease in maximum number of workers on any day

(1) Breakup of Safety, Health and Welfare facilities as per prescribed format only in case for increase in

maximum No. of workers.

D. Increase/Decrease in installed power

(1) Letter of approval of plans granted by Chief Inspector for revision in plant & machinery layout.

E. Addition/Deletion of the premises

(1) Letter of approval of plans granted by Chief Inspector for revision in site.

(2) Documents with respect to ownership of premises only in case of addition of premises.

ANNEXURE – III

Transfer of license by virtue of change of Occupier

(1) List of current Directors/Partners issued by Registrar of Companies/Registrar of Firms

(2) Board Resolution/Resolution appointing applicant Director/Partner as the Occupier duly signed by

all Directors/Partners or certified by Company Secretary (in case of Company) along with reg. No. &

seal.

(3) Letter from earlier Occupier regarding transfer of license in the name of new Occupier/DIR-12 issued

by Registrar of Companies indicating cessation of earlier Occupier as Director (in case of company)

(4) Order of Appointment issued by concerned Ministry/Department in case of Central/State Government

owned/controlled factory.

(5) Succession Deed in case of death of a proprietor along with NOC’s from remaining legal heirs in case

of multiple legal heirs.

NOTE:

In case the application submitted is for more than one criteria, the system while listing out the

documents shall indicate common document(s) only once.”.

By order and in the name of the Governor of Goa.

Anant S. Pangam, Chief Inspector of Factories and Boilers and ex officio Joint Secretary.

Panaji, 18th December, 2024.

OFFICIAL GAZETTE — GOVT. OF GOA

SERIES I No. 40

2ND JANUARY, 2025

1801

Department of General Administration

–––

Corrigendum

23/1/87-GA&C(Vol. V)/5025

In the Government Notification No. 23/1/

/87-GA&C (Vol.V)/2909 dated 23-07-2024,

published in the Official Gazette, Series I

No. 48, dated 01-08-2024, on page No. 519,

for the expression “III. Finance (Debt

Management/Institutional Finance) Division”,

the

expression

“II.

Finance

(Debt

Management/Institutional Finance) Division”

shall be substituted.

By order and in the name of the

Governor of Goa.

Shreyas Dsilva, Under Secretary (GA-II).

Porvorim, 23rd December, 2024.

———uuu———

Department of Law & Judiciary

Law (Establishment) Division

–––

Corrigendum

1-53-82/-LD(Estt.)/Part/2439

Read: Notification No. 1-53-82/LD(Estt.)/

/Part/442 Panaji dated 4th March,

2024.

Rule 2(i) of the Goa Judicial Service

(Second Amendment) Rules, 2024 be read as:

“(a) for the figure “25%”, the figure

“*35%” shall be substituted;

(b) for the figure “10%”, the figure

“**15%” shall be substituted;

Footnote

* From 25% to 35% w.e.f. 01-01-2020.

** From 10% to 15% w.e.f. 01-01-2020.”

By order and in the name of the

Governor of Goa.

Amir Y. Parab, Under Secretary, Law (Estt).

Porvorim, 30th December, 2024.

Department of Personnel

–––

Notification

1/7/2024-PER

In exercise of the powers conferred by the

proviso to article 309 of the Constitution of

India, the Governor of Goa hereby makes the

following rules to regulate the recruitment to

the Group ‘A’, Gazetted, Non-Ministerial post,

in the Goa Medical College and Hospital,

Government of Goa, namely:—

1. Short title, application and commence-

ment.— (1) These rules may be called the

Government of Goa, Goa Medical College and

Hospital, Group ‘A’, Gazetted, Non-Ministerial

post, Recruitment Rules, 2024.

(2) They shall apply to the post specified in

column (1) of the Schedule to these rules

(hereinafter called as the “said Schedule”).

(3) They shall come into force on the date

of their publication in the Official Gazette.

2. Number, classification and level in the

pay matrix.— The number of posts,

classification of the said post and level in the

pay matrix attached thereof shall be as

specified in columns (2) to (4) of the said

Schedule:

Provided that the Government may vary

the number of posts as specified in column

(2) of the said Schedule from time to time

subject to exigencies of work.

3. Method of recruitment, age limit

and other qualifications.— The method of

recruitment to the said post, age limit,

qualifications and other matters connected

therewith shall be as specified in columns

(5) to (13) of the said Schedule.

4. Disqualification.— No person who has

entered into or contracted a marriage with

OFFICIAL GAZETTE — GOVT. OF GOA

SERIES I No. 40

2ND JANUARY, 2025

1802

a person having a spouse living or

who, having a spouse living, has entered

into or contracted a marriage with any

person, shall be eligible for appointment

to the service:

Provided that the Government may,

if satisfied that such marriage is permissible

under the personal law applicable to

such person and the other party to the

marriage and that there are other grounds

for so doing, exempt any person from the

operation of this rule.

5. Power to relax.— Where, the Government

is of the opinion that it is necessary or

expedient so to do, it may, by order, for

reasons to be recorded in writing and in

consultation with the Goa Public Service

Commission, relax any of the provisions of

these rules with respect to any class or

category of persons.

6. Saving.— Nothing in these rules

shall affect reservation, relaxation of age

limit and other concessions required to

provided

for

Scheduled

Castes,

Scheduled Tribes, Other Backward Classes,

Ex-servicemen and other special categories

of persons in accordance with the orders

issued by the Government from time to

time in that regard.

These rules are issued in consultation with

the Goa Public Service Commission conveyed

vide its letter No. COM/II/13/30(4)/2024/1436

dated 17-12-2024.

By order and in the name of the

Governor of Goa.

Eshant V. Sawant, Under Secretary

(Personnel-I).

Porvorim, 23rd December, 2024.om

Whether age & educational

qualifications prescribed for the

direct recruits will apply in the

case of promotees

SCHEDULE

Number

posts

Period

proba-

tion,

if any

Method of

recruitment,

whether by

direct recruit-

ment or by

promotion or

by deputation/

/absorption

and percentage

of the vacancies

to be filled by

various methods

In case of

recruitment by

promotion/

/deputation/

/absorption,

grades from

which promo-

tion/deputation/

/absorption is to

be made

Educational

and other

qualifications

required for

direct recruits

Level in

the pay

matrix

Classifi-

cation

Whether

selection

post or

non-

-selec-

tion post

If a

D.P.C./

/D.S.C.

exists,

what is its

compo-

sition

Age

limit

for

direct

recruits

Circum-

stances in

which the

Goa Public

Service

Commission

is to be

consulted in

making

recruitment

Name/

/desig-

nation

of post

N.A.

Group ‘A’, D.P.C.

consisting of:—

(1) Chairman/

/Member of

the Goa

Public Ser-

vice Commi-

ssion —

Chairman.

N.A.

By direct

recruitment.

Embryo-

logist.

N.A.

(2024)

(Subject to

variation

dependent

on work-

load).

Goa

General

Service,

Group ‘A’,

Gazetted,

Non-

Ministe-

rial.

L-11.

Two

years.

Consultation

with the

Goa Public

Service

Commission

is necessary

for making

Not excee-

ding 45

years (Relax-

able for

Government

servants

upto five

years in

Essential:

(1) Post-Graduate

in Clinical

Embryology

(Graduate with

full time

program with

minimum four

OFFICIAL GAZETTE — GOVT. OF GOA

SERIES I No. 40

2ND JANUARY, 2025

1803

(2) Chief

Secretary or

his nominee

—Member.

(3) Administra-

tive Secretary/

Head of

Department

—Member.

(For confirm-

ation).

direct

recruitment,

confirmation

and for

amending/

/relaxing

any of the

provisions of

these rules.

accordance

with the

instructions

or orders

issued by

the Govern-

ment from

time to time).

semesters) from

a recognized

University with

additional three

years of human

Assisted

Reproductive

Technology

(ART) laboratory

experiences in

handling human

gametes and

embryos.

Ph.D. holder full

time Ph.D

project shall be

related to

Clinical

Embryology or

assisted

reproductive

technology or

Fertility from a

recognized

university with

an additional

one year of

human ART

laboratory

experience in

handling human

gametes and

embryos.

Medical

Graduate

(MBBS) or

Veterinary

Graduate

(BVSc) with a

post-graduate

Degree in

Clinical

Embryology (full

time program)

from a

recognized

OFFICIAL GAZETTE — GOVT. OF GOA

SERIES I No. 40

2ND JANUARY, 2025

1804

www.goaprintingpress.gov.in

Printed and Published by the Director, Printing & Stationery,

Government Printing Press,

Mahatma Gandhi Road, Panaji-Goa 403 001.

PRICE – Rs. 24.00

PRINTED AT THE GOVERNMENT PRINTING PRESS, PANAJI-GOA—313/100—01/2025.

University with

additional two

years of

Assisted

Reproductive

Technology

(ART) laboratory

experience in

handling human

gametes and

embryos.

Post-Graduate in

life sciences or

Biotechnology

with a minimum

of one year of

on-site, full time

Clinical

Embryology

certified training

in addition to

four years

experience in

handling human

gametes and

embryos in a

registered

Assisted

Reproductive

Technology

(ART) level 2

clinic.

(2) Knowledge of

Konkani.

Desirable:

Knowledge of

Marathi.