The Rules for a combined competitive Engineering Services Examination to be held by the Union Public Service Commission in (2002) for the purpose of filling vacancies in the following Services-Posts arc, with the concurrence of the Ministries-Departments concerned, published for general information.

REGD. NO. D. L.-33004/99

The Gazette of India

EXTRAORDINARY

PART I—Section 1

PUBLISHED BY AUTHORITY

No. 14] NEW DELHI, SATURDAY, JANUARY 19, 2002/PAUSA 29, 1923

207 GI/2002

(1)2 THE GAZETTE OF FNDIA: EXTRAORDINARY [PART 1—SEC. 1 ] i4 THE GAZETTE OF INDIA: EXTRAORDINARY [PART I—SEC. 11 5 6 THE GAZETTE OF INDIA: EXTRAORDINARY (PART I—SEC. 11 7 8 THE GAZETTE OF INDIA: EXTRAORDINARY [PART I—SEC. 11 9

" vn /rt"i^vm'i i

207 GI/2001—318 THE GAZETTE OF INDIA : EXTRAORDINARY [PART I—SEC. 1] 19 20 THE GAZETTE OF INDIA : EXTRAORDINARY [PAiir I—SEC. 1] 21 22 THE GAZETTE OF INDIA : EXTRAORDINARY [PART I—SEC. 1] 23 24 THE GAZETTE OF INDIA: EXTRAORDINARY [PART I—SEC. 1] 25 207 GI/2001—426 THE GAZETTE OF INDIA : EXTRAORDINARY [PART I—SEC. 1] 27 28 THE GAZETTE OF INDIA : EXTRAORDINARY [PART I—SEC. 1 ] 29 30 THE GAZETTE OF INDIA : EXTRAORDINARY [PART I—SEC. 1] 31 32 THE GAZETTE OF INDIA : EXTRAORDINARY [PART I—SEC. 11 33 207 G1/2001—534 THE GAZETTE OF INDIA : EXTRAORDINARY [PART I—SEC. 1] 35

MINISTRY OF RAILWAYS

(RAILWAY BOARD)

New Delhi, the 19th January 2002

(vii) Military Engineer Service (IDSE) (Electrical and Mechanical Cadre) (Mechanical Engineering Posts).

(viii) Central Electrical & Mechanical Engineering

RULES

No. 2001E(GR)/I/18/l.—The Rules for a combined competitive Engineering Services Examination to be held by the Union Public Service Commission in (2002), for the purpose of filling vacancies in the following Services/ Posts arc, with the concurrence of the Ministries/ Departments concerned, published for general information.

Service (Mechanical Engineering Posts).

(ix) Assistant Executive Engineer (Elect. & Mech.) (Mechanical Engineering Posts), Border Roads Engineering Service, Group-A.

(x) Mechanical Engineer (Junior) Group 'A' in Geological Survey of India.

CATEGORY I—CIVIL ENGINEERING

(xi) Drilling Engineering (Junior) Group A in Group-A Services/Posts

(i) Indian Railway Service of Engineers.

(ii) Indian Railway Stores Service (Civil Engineering Posts).

Geological Survey of India.

(xii) Central Engineering Service (Roads) Group 'A' (Mechanical Engineering Posts).

CATEGORY III—ELECTRICAL ENGINEERING

(iii) Central Engineering Service.

Group-A Services/Posts

(iv) Military Engineer Service (IDSE) (Building and Roads Cadre)

(v) Military Engineer Service (Surveyor of Works Cadre).

(vi) Survey of India Service, Group-A (Civil Engineering Posts).

(vii) Central Water Engineering Service (Civil Engineering Posts).

(viii) Central Engineering Service (Roads), Group- A (Civil Engineering Posts).

(ix) Assistant Executive Engineer (Civil) in Border Roads Engineering Service, Group-A.

(x) Indian Ordnance Factories Service (Engineering Branch) (Civil Engineering Posts).

(i) Indian Railway Service of Elcctrica Engineers.

(ii) Indian Railway Stores Service (Electrical Engineering Posts).

(iii) Central Electrical & Mechanical Engineering Service (Electrical Engineering Posts) (iv) Tndian Ordnance Factories Service (Engineering Branch) (Electrical Engineering Posts):

(v) Indian Naval Armament Service (Electrical Engineering Posts).

(vi) Central Power Engineering Service (Electrical Engineering Posts).

(vii) Military Engineering Service (IDSE) (Electrical and Mechanical Cadre) (Electrical Engineering Posts).

CATEGORY II— MECHANICAL ENGINEERING

Group-A Services/Posts

(i) Indian Railway Service of Mechanical Engineers.

(ii) Indian Railway Stores Service (Mechanical Engineering Posts).

(viii) Assistant Executive Engineer Group' A' (Electrical Engineering Posts) in the Corps of E.M.E., Ministry of Defence.

CATEGORY IV—ELECTRONICS AND TELE-

COMMUNICATION ENGINEERING

(in) Central Water Engineering Service Group-A Services/Posts

(Mechanical Engineering Posts).

'iv) Central Power Engineering Service (Mechanical Engineering Posts).

(v) Indian Ordnance Factories Service (Engineering Branch) (Mechanical Engineering Posts).

(vi) Indian Naval Armament Service (Mechanical Engineering Posts).

(i) Indian Railway Service of Signal Engineers.

(ii) Indian Railway Stores Service (Tele- communication/Electronics Engineering Posts).

N.B. (ii)—No request for addition/alteration in the

preferences indicated by a candidate in his detailed application form will be entertained by the Commission (iii) . Engineer in Wireless Planning and Co- ordination Wing/Monitoring Organisation; Ministry of Communications (Department of Telecommunication).

(IV) Indian Ordnance Factories Service (Engineering Branch) (Electronics Engineering Posts).

N.B. (iii)—Departmental candidates are the candidates admitted to the examination under age relaxation [Vide Rule 5(b)] Such candidates may give their preferences for the Services/Posts in other Ministries/Departments also.

(v) Indian Naval Armament Service (Electronics

Engineering Posts).

(vi) Central Power Engineering Service

(Telecommunication Engineering Posts),

N.B. (iv)—Candidates admitted to the examination under the proviso to Rule 6 will be considered only for the posts mentioned in the said proviso and their preference for other Services and Posts, if any, will be ignored.

(vii) Survey of India Service. Group 'A' (Electronics and Telecom. Engineering Posts).

N.B. (v)—The candidates will be allotted to various Services/Posts strictly in accordance with their merit position, preferences exercised by them and number of vacancies, subject to their medical fitness.

(viii) Assistant Executive Engineer, Group 'A' (Electronics Engineering Posts) in the Corps of E.M.E. Ministry of Defence.

Group 'B' Services/Posts

3. The number of vacancies to be filled on the results of the examination will be specified in the Notice issued by the Commission.

Reservation will be made for candidates belonging (ix) Assistant Engineer Group ' B' (Electronics & Telecommunication Engineering Posts) in the Corps of EM E., Ministry of Defence.

1. The examination will be. conducted by the Union Public Service Comnrs¹"pn in the manner prescribed in Appendix-1 to these kuics

to the Scheduled Castes, the Scheduled Tribes and the Other Backward Classes and physically disabled categories in respect of vacancies as may be fixed by the Government.

The dates on wl: - % '. the places at which the examination will b<: '-'; <%\ tall be fixed by the Commission.

No posts have been identified to be reserved in IRSE, IRSME, IRSEE, IRSSE and IRSS for physically handicapped persons.

4. A candidate must be either :—

(a) a citizen of India, or

(b) a subject of Nepal, or

(c) a subject of Bhutan, or

(d) a Tibetan refugee who came over to India before the 1st January, 1962 with the intention of permanently settling in India, or

2. A candidate may comp ;te in respect of any one of the categories of Sen iccs/Posis viz. Civil Engineering or Mechanical Engineering or Electrical Engineering or Electronics & Telecommunication Engineering. A candidate who qualifies on the result of the written part of the examination will be required to indicate clearly in the detailed application form t*ie Services/Posts for which he wishes to be considered in the order of preference. The candidate is advised to indicate as many preferences as he wishes to so that having regard to his rank in order of merit due consideration can be given to his preferences when making appointment.

N.B. (i)—Candidates are advised to indicate all the

(e) a person of Indian origin who has migrated from Pakistan, Burma, Sri Lanka, the East African countries of Kenya, Uganda, the United Republic of Tanzania, Zambia, Malawi, Zaire and Ethiopia or Vietnam with the intention of permanently settling in India.

Provided that a candidate belonging to categories (b), (c), (d) and (e) above shall be a person in whose favour a certificate of eligibility has been issued by the Government of India.

A candidate in whose case a certificate of eligibility

is necessary, may be admitted to the examination but the Services/Posts for which they are eligible in terms of the Rules in the order of preference in their detailed application form. In case a candidate does not give any preference for any Service/Post or does not include certain Services/Posts in his application form, it will be assumed that he has no specific preference for those Services/Posts and in that event he shall be allocated to any of the remaining Services/Posts in the order as appearing in the notification and in which there are vacancies after allocation of candidates according to the Services/Posts of their preference.

offer of appointment may be given only after the necessary eligibility certificate has been issued to him by the Government of India.

5. (a) A candidate for this examination must have attained the age of 21 years and must not have attained the age of 30 years on the 1st August, 2002 i.e. he must have been bom not earlier than 2nd August, 1972 and not later than the 1st August 1981.

(b) The upper age-limit of 30 years will be relaxable up to 35 years in the case of the Government servants of the following categories, if they are employed in a Department/ Office under the control of any of the authorities mentioned in column 1 below and apply for admission to the examination for all or any of the Service(s)/Post(s) mentioned in column 2, for which they are otherwise eligible.

(i) A candidate who holds substantively a permanent post in the particular Department/Office concerned. This relaxation will not be admissible to a probationer appointed against a permanent post in the Department/Office during the period of his probation.

(ii) A candidate who has been continuously in a temporary service on a regular basis in the particular Department/Office for at least 3 years on the 1st August, 2002.

Column 1

Column 2

(2)

(1)

Railway Department

I.R.S.E. I.R.S.M.E

I.R.S.E.E.

I.R.S.S.E.

Central Public Works

(2)

(1)

Group 'A¹

Technology

Geological Survey of India Drilling Engineer (Junior) Group'A' MechanicalEngineer (Junior) Group'A

Note—The period of apprenticeship if followed by appointment against a working post on the Railways may be treated as Railway Service for the purpose of age concession.

(c) The upper age-limit prescribed above will be further relaxable :

(i) Upto maximum of five years if a candidate belongs to a Scheduled Caste or a Scheduled Tribe.

(ii) Upto a maximum of three years in the case of candidates belonging to Other Backward Classes who are eligible to avail of reservation applicable to such candidates.

(iii) Upto a maximum of five years if a candidate had ordinarily been domiciled in the State of Jammu and Kashmir during the period from the 1st January, 1980 to the 31st day of December, 1989,

(iv) Upto a maximum of three years, in the case of Defence Services personnel, disabled in operations during hostilities with any foreign country or in a disturbed area, and released as a consequence hereof.

(vii) Upto a maximum of 10 years in the case of blind, deaf-mute and Orthopaedically handicapped persons.

NOTE I: Candidates belonging to the Scheduled Castes and the Scheduled Tribes and Other Backward Classes who are also covered under any other clauses of Rule (5) (c) above, viz. those coming under the category of Ex-Servicemen, persons domiciled in the State of J & K, blind, deaf-mute and orthopaedically handicapped etc. will be eligible for grant of cumulative relaxation under both the categories.

NOTE II: The term ex-servicemen will apply to the persons who are defined as ex-servicemen in the Ex- servicemen (Re-employment in Civil Services and Posts) Rules, 1979, as amended from time to time.

NOTE III: The age concession under Rule 5(c) (v) and (vi) will not be admissible to Ex-Servicemen and Commissioned Officers including ECOs/SSCOs, who are released on own request.

NOTE IV: Notwithstanding the provision of age- relaxation under Rule 5(cJ(vii) above, a physically handicapped candidate will be considered to be eligible for appointment only if he/she (after such physical examination as the Government or appointing authority, as the case may be, may prescribe) is found to satisfy the requirements of physical and medical standards for the concerned Service/Posts to be allocated to the physically handicapped candidate by the Government.

N.B.-Thc candidature of a person who is admitted to the examination under the age concession mentioned in Rule 5(b) above shall be cancelled if. after submitting his application he resigns from service or his services are terminated by his department/office cither before or after taking the examination. He will, however, continue to be eligible if he is retrenched from the service or post after submitting his application.

A candidate who after submitting his application to the department is transferred to other department/office will be eligible to compete under departmental age concession for the service/post for which he would have been eligible but for his transfer provided his application has been forwarded by his parent department. SAVE AS PROVIDED ABOVE THE AGE LIMITS PRESCRIBED CAN IN NO CASE BE RELAXED.

The date of birth accepted by the Commission is that entered in the Matriculation or Secondary School Leaving Certificate or in a certificate recognised by an Indian University as equivalent to Matriculation or in an extract from a Register of Matriculates maintained by a University which extract must be certified by the proper authority of the University or in the Higher Secondary or an equivalent examination certificate.

No other document relating to age like horoscope, affidavits, birth extracts from Municipal Corporation, Service records and the like will be accepted.

The expression Matriculation/Higher Secondary Examination Certificate in this part of the instructions include the alternative certificates mentioned above.

NOTE 1 : Candidates should note that only the date of birth as recorded in the Matriculation/ Secondary Examination Certificate or an equivalent certificate on the date of submission of application will be accepted by the Commission and no subsequent request for its change will be considered or granted.

NOTE 2 : Candidate should also note that once a date of birth has been claimed by them and entered in the records of the Commission for the purpose of admission to an Examination, no change will be allowed subsequently (or at any other Examination of the Commission) on any ground whatsoever.

6. A candidate must h a v e- fa) obtained a Degree in Engineering from a University incorporated by an Act of the Central or State Legislature in India or other Educational Institutes established by an Act of Parliament or declared to be deemed as University under Section 3 of the University Grants Commission Act, 1956; or (b) passed Sections A and B of the Institution Examinations of the Institution of Engineers (India); or

(c) obtained a Degree/Diploma in Engineering from such foreign University/College/ Institution and under such conditions as may be recognised by the Government for the purpose from time to lime; or

(d) passed Graduate Membership Examination of the Institution of Electronics and Tele- communication Engineers (India); or (e) passed Associate Membership Examination Parts II and Ill/Sections A and B of the Aeronautical Society of India, or

(f) passed Associate Membership Examination (Sections A and B) of the Institution of Mechanical Engineers (India); or

(g) passed Graduate Membership Examination of the Institution of Electronics and Radio Engineers, London held after November, 1959, Provided that a candidate for the posts of Engineer Group 'A' in Wireless Planning and Coordination Wing/39 Monitoring Organisation, Ministry of Communication and Indian Naval Armament Service (Electronics Engg. Posts) may possess any of the above qualifications or the qualification mentioned below namely:

MSc. degree or its equivalent with Wireless Communication Electronics, Radio Physics or Radio Engineering as a special subject.

NOTE 1.—A candidate who has appeared at an examination the passing of which would render him educationally qualified for this examination, but has not been informed of the result, may apply for admission to the examination. A candidate who intends to appear, at such a qualifying examination may also apply. Such candidates will be admitted to the examination, if otherwise eligible, but their admission would be deemed to be provisional and subject to cancellation, if they do not produce proof of having passed the requisite qualifying examination alongwith the detailed application which will be required to be submitted by the candidates who qualify on trie result of the written part of the examination.

NOTE. 2.—In exceptional cases the Commission may treat a candidate who has not any of the qualifications prescribed in this rule, as educationally qualified provided that he has passed examinations conducted by other institutions the standard of which in the opinion of the Commission justifies his admission to the examination.

NOTE 3.—A candidate who is otherwise qualified but who has taken a degree from a foreign University which is not recognised by Government, may also apply to the Commission and may be admitted to the examination at the discretion of the Commission

7. Candidates must pay the fee prescribed in the Commission's Notice.

8." All Candidates in Government service, whether in permanent or in temporary capacity or as workcharged employees, other than casual or daily rated employees or those serving under Public Enterprises will be required to submit an undertaking that they have informed in writing, their Head of Office/Department that they have applied for the Examination.

Candidates should note that in case a communication is received from their employer by the Commission withholding permission to the candidates applying for/appearing at the examination, their application will be liable to be rejected/ candidature will be liable to be cancelled.

9. The decision of the Commission as to the acceptance of the application of a candidate and his eligibility or otherwise for admission to the examination shall be final.

The candidates applying for ihe examination should ensure that they fulfil all the eligibility conditions for admission to the Examination. Their admission at all the stages of examination for which they are admitted by the Commission viz, written Examination and Interview Test will be purely provisional, subject to their satisfying the prescribed eligibility conditions. If on verification at any time before or after the written Examination or Interview Test it is found that they do not fulfil any of the eligibility conditions, their candidature for the examination will be cancelled by the Commission 10. No candidate shall be admitted to the examination unless he holds a certificate of admission from the Commission.

11. A Candidate who is or has been declared by the Commission to be guilty of:—

(i) obtaining support for his candidatures by any means; or

(ii) impersonating; or

(iii) procuring impersonation by any person; or (iv) submitting fabricated documents or documents which have been tampered with; or

(v) making statements which are incorrect or false or suppressing material information; or (vi) resorting to any other irregular or improper means in connection with his candidature for the examination; or

(vii) using unfair means during the examination;

or

(viii) writing irrelevant matter including obscene language or pornographic matter in the script(s); or

(ix) misbehaving in any other manner in the examination hall; or

(x) harassing or doing bodily harm to the staff employed by the Commission for the conduct of their examination; or

(xi) violating any of the instructions issued to candidates alongwith their admission certificate permitting them to take the examination; or4 0 THE GAZETTE OF INDIA : EXTRAORDINARY [PART I—SEC, 1] (xii) attempting to commit or as the case may be

abetting the commission of all or any of the acts specified in the foregoing clauses.

May in addition to rendering himself liable to

criminal prosecution be liable—

Scheduled Castes or the Scheduled Tribes or the Other Backward Classes may to the extent of the number of vacancies reserved for the Scheduled Castes, the Scheduled Tribes and the Other Backward Classes be recommended by the Commission by a relaxed standard subject to the fitness of these candidates for selection to the Service:

(a) to be disqualified by the Commission from the examination for which he is a candidate; and/or

(b) to be debarred either permanently or for a

specified period—

(i) by the Commission from any examination or selection held by them;

Provided that the candidates belonging to the Scheduled Castes, the Scheduled Tribes and the Other Backward Classes who have been recommended by the Commission without resorting to any relaxations/ concessions in the eligibility or selection criteria, at any stage of the examination shall not be adjusted against the vacancies reserved for the Scheduled Castes, the Scheduled Tribes and the Other Backward Classes.

(ii) by the Central Government, from any

"14. The prescribed qualifying standards will be employment under them; and

(c) if he is already in service under the

Government, to disciplinary action under the appropriate rules :

Provided that no penalty under this rule shall be

imposed except after—

(i) giving the candidate an opportunity of

making such representation in writing as he may wish to make in that behalf; and

relaxable at the discretion of the Commission at all the stages of examination in favour of physically handicapped candidates in order to fill up the vacancies reserved for them. In case, however, the physically handicapped candidates get selected on their own merit in the requisite number at the qualifying standards fixed by the Commission for General, SC, ST and OBC category candidates, extra physically handicapped candidates i.e. more than the number of vacancies reserved for them (PH) will not be recommended by the Commission on the relaxed standards,"

(ii) taking the representation if any submitted by the candidate, within the period allowed to him, into consideration.

12. Candidates who obtain such minimum

15. The form and manner of communication of the result of the examination to individual candidates shall be decided by the Commission in their discretion and the Commission will not enter into correspondence with them regarding the result.

qualifying marks in the written examination as may be fixed by the Commission in their discretion shall be summoned by them for an interview for a personality test:

Provided that candidates belonging to the

16. Subject to other provisions contained in these rules, successful candidates will be considered for appointment on the basis of the order of merit assigned to them by the Commission and the preferences expressed by them for various Services/Posts at the time of their application.

Scheduled Castes or the Scheduled Tribes or the Other Backward Classes may be summoned for an interview for a Personality Test by the Commission by applying relaxed standards if the Commission are of the opinion that sufficient number of candidates from these communities arc not likely to be summoned for interview for a personality test on the basis of the general standard in order to fill up the vacancies reserved for them.

17 Success in the examination confers no right to appointment unless the Government is satisfied after such an enquiry as may be considered necessary, that the candidate having regard to his character and antecedents, is suitable in all respects for appointment to the service.

13. (I) After the interviews the candidates will be arranged by the Commission in the order of merit as disclosed by the aggregate marks finally awarded to each candidate, and in that order so many candidates as are found by the Commission to be qualified at the examination shall be recommended for appointment up to the number of unreserved vacancies decided to be filled on the result of the examination.

(ii) The candidates belonging to any of the

18. To be passed as fit for appointment, acandidatc must be in good mental and bodily health and free from any physical defect likely to interfere with the discharge of his duties as an officer of the service. A candidate who after such medical examination as Government or the appointing authority, as the case may be may prescribe is found not to satisfy these requirements will not be appointed.

The attention of the candidates is invited to the Regulation relating to the Physical Examination published herewith, It will be seen therefrom that the physical standards prescribed vary for different services. The candidates arc therefore advised to keep these standards in view with specific reference to services for which they have competed/expressed preferences to the Union Public Service Commission.

THE CANDIDATES SHOULD NOTE THAT THEY WILL RECEIVE SEPARATE INTIMATION REGARDING MEDICAL EXAMINATION FROM THE MINISTRY OF RAILWAYS (RAILWAY BOARD).

S 6. Work performed by silting (onbench or chair) ST 7. Work performed by standing

W 8. Work performed by walking

SE 9. Work performed by seeing

H 10, Work performed by hearing/speaking RW 11. Work performed by reading and writing.

The functional classification in their case shall be, one or more of the following, consistent with the requirements of the concerned Services/Posts :—

FUNCTIONAL CLASSIFICATION

The candidates may also please note that:

(i) A sum of Rs. 50 (Rupees Fifty Only.) in cash, is required to be paid by them to the Medical Board;

(ii) No travelling allowance will be paid for the journey performed in connection with the medical examination, and (iii) the fact that a candidate has been physically examined will not mean or imply that he will be considered for appointment.

Note.—In order to prevent disappointment, candidates are advised to have themselves examined by a Government Medical Officer of the standing of a Civil Surgeon, before applying for admission to the examination. Particulars of the nature of the medical test to which candidates will be subjected before appointment and of the standards required are given in Appendix II, For the disabled/ex-Defence Services personnel the standards will be relaxed consistent with requirements of each service.

19 For being considered against the vacancies reserved for them, the physically disabled persons should have disability of Forty per cent (40%) or more. However, such candidates shall be required to meet one or more of the following physical requirements/abilities which may be necessary for performing the duties in the concerned Services/Posts :—

CODE PHYSICAL REQUIRMENTS F 1. Work performed by manipulating (with Fingers)

PP 2. Work performed by pulling & pushing L 3. Work performed by lifting.

KC 4. Work performed by kneeling and Grouching B 5. Work performed by bending

207 GI/2001—6

CODE FUNCTIONS

BL 1. both legs affected but not arms.

BA 2, both arms affected— a. impaired reach

b. weakness of grip, BL 3. both legs and both arms affected,

OL 4. one leg affected (R or L) a. impaired reach

b. weakness of grip

c. at axic

OA 5. one arm affected (R or L) - d o-

BH 6, stiff back and hips (cannot sit or stoop).

MW 7. muscular weakness and limited physical endurance

B 8. the blind

PB 9. partially blind

D 10. the deaf

PD 11. partially deaf.

20, No person :—

(a) who has entered into or contracted a marriage with a person having a spouse living, or (b) who having a spouse living has entered into or contracted a marriage with any person, shall be eligible for appointment to service;

Provided that Central Government may if satisfied that such marriage is permissible under the personal law applicable to such person and other party to the marriage and there arc other grounds for so doing exempt any person from the operation of this rule. 21. Candidates are informed that some knowledge of Hindi prior to entry into service would be of advantage in passing departmental examinations which candidates have to pass after entry into service4 2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART I—SEC. 1] 22. Brief particulars relating to the Services/Posts 1 2 3 Section II—Conventional Papers to which recruitment is being made through this examination are given in Appendix HI. 200 Mechanical Engineering Paper I 3 hrs. 200 3 hrs. Mechanical Engineering Paper II MANEESH KUMAR, Jt. Director, Railway Board

APPENDIX I

1. The examination shall be conducted according to the following plan :—

Part I.—The written examination will comprise two sections—Section I consisting only of objective type of questions and Section II of conventional papers. Both Sections will cover the entire syllabus of the relevant engineering disciplines viz. Civil Engineering, Mechanical engineering. Electrical Engineering and Electronics & Telecommunications Engineering. The Standard and syllabi prescribed for these papers arc given in Schedule to the Appendix, The details of the written examination i.e. subjects, duration and maximum marks allotted to each subject are given in para 2 below.

Part II—Personality test carrying a maximum of 200 marks of such of the candidates who qualify on the basis of the written examination.

2. The following will be the subjects for the written examination:—

Subject

Duration Maximum Marks

(2)

(3) (1)

Category -I—CIVIL ENGINEERING

Soction-I—Objeotive Papers General Ability Test

2hrs.

Papers 200 (Part A: Genera] English)

(Part B: General Studies)

Civil Engineering Paper-I

200

2hr8.

Civil Engineering Paper-II

2hrs.

200 Section II—Conventional Papers

Civil Engineering Paper I

3 hrs.

200

3hrs

Civil Engineering Paper II

200

TOTAL

1000 Category II—MECHANICAL ENGINEERING

Section I—Objective Papers

2. hrs.

200 General Ability Test

(Part A . General English)

(Part B : General Studies)

200 Mechanical Engineering Paper I

2 hrs.

200 Mechanical Engineering Paper II

2hrs.

1000

TOTAL

Category III—ELECTRICAL ENGINEERING

Section I—Objective Papers

200 General Ability Tost

2hrs.

(Part A ; General English)

(Part 0 : General Studies)

200 Electrical Engineering Paper I

2hrs.

200 Electrical Engineering Paper II

2hrs,

Section Q—Conventional Papers

Electrical Engineering Paper I

200

3hro.

200 Electrical Engineering Paper II

3 hrs.

1000

TOTAL

Category IV—ELECTRONICS AND TELECOMMUNI- CATION ENGINEERING

Section I—Objective Papers

200 General Ability Test

2hrs.

(Part A : General English)

(Part B : General Studies)

Electronics & Telecommunication

200 Engineering Paper I

2hrs.

Electronics & Telecommunication

200

2hrs.

Engineering Paper II

Section II—Conventional Papers

Electronics & Telecommunication

200

3hrs.

Engineering Paper I

Electronics & Telecommunication

200

3 hrs.

Engineering Paper II

1000

TOTAL

Note : Candidates are advised to read carefully special instructions to candidates for conventional type tests and objective type tests given in Appendix-IV (Part A & Part B) including the procedure regarding filling in the Answer Sheet of objective type tests in the Examination Hall published in the Employment News/ Rozgar Samachar dated 19-1-2002.

3. In the Personality Test special attention will be paid to assessing the candidate's capacity for leadership, initiative and intellectual curiosity, tact and other social qualities, mental and physical energy, powers of practical application and integrity of character.

4. Conventional papers must be answered in English. Question paper will be-sct in English only.

5. Candidates must write the papers in their own hand. In no circumstances will they be allowed the help of a scribe to write the answers for them.

6. The Commission have discretion to fix qualifying

CIVIL ENGINEERING

marks in any or all the subjects of the examination.

(for both objective and conventional type papers)

7. Marks will not be allotted for mere superficial

P A P E R!

knowledge.

1. BUILDING MATERIALS

8. Deduction upto five per cent of the maximum marks for the written papers will be made for illegible handwriting.

Timber ; Different types and species of structural timber, density-moisture relationship, strength in different directions, defects, influence of defects on permissible stress, preservation, dry and wet rots, codal provisions for designs. Plywood.

9. Credit will be given for orderly, effective and exact expression combined with due economy of words in the conventional pape?" of the examination.

10. In the question papers, wherever required, SI

units will be used.

Bricks : Types, Indian Standard classification, absorption, saturation factor, strength in masonry, influence of mortar strength on masonry strength.

Cement : Compounds of, different types, setting

times, strength.

NOTE:—Candidates will be supplied with standard tables/charts in SI units in the Examination hall for reference purpose, wherever considered necessary.

Cement Mortar: Ingredients, proportions, water

demand, mortars for plastering and masonry.

11. Candidates are permitted to bring and use battery operated pocket calculators £br conventional (essay) type papers only. Loaning or inter-changing of calculators in the Examination Hall is not permitted.

Concrete : Importance of W/C Ratio, strength, ingredients including admixtures, workability, testing for strength elasticity, non-destructive testing, mix design methods,

2. SOLID MECHANICS

It is also important to note that candidates arc not permitted to use calculators for answering objective type papers (Test booklets). They should not therefore, bring the same inside the Examination Hall.

Elastic constants, stress, plane stress, Mohr's circle of stress, strains, plane strain, Mohr's circle of strain, combined stress, Elastic theories of failure; Simple bending, shear; Torsion of circular and rectangular sections and simple members.

12. Candidates should use only International form of Indian numerals (e.g. 1,2, 3,4,5 etc.) while answering question papers.

3. STRUCTURAL ANALYSIS

SCHEDULE TO APPENDIX I

Analysis of determinate structures—different Standard and Syllabi

methods including graphical methods.

Analysis of indeterminate skeletal f r a m e s-

moment distribution, slope-deflection, stiffness and force methods, energy methods. Muller-Breslaie principle and application.

Plastic analysis of indeterminate beams and simple The standard of paper in. General Ability Test will be such as may be expected of an Engineering/Science Graduate. The standard of papers in other subjects will approximately be that of an Engineering Degree Examination of an Indian University. There will be no practical examination in any of the subjects.

frames—shape factors,

4. DESIGN OF STEEL STRUCTURES.

GENERAL ABILITY TEST

Part A : General English: The question paper in General English will be designed to test the candidate's understanding of English and workmanlike use of words.

Principles of working stress method/Design of connections, simple members. Built-up sections and frames. Design of Industrial roofs. Principles of-ultimate load design. Design of simple members and frames.

5. DESIGN OF C O N C R E TE AND MASONRY

STRUCTURES

Limit state design for bending, shear, axial Part B : General Studies : The paper in General Studies will include knowledge of cufrent events and of such matters of everyday observation and experience in their scientific aspects as may be expected of an educated person. The paper will also include questions on History of India and Geography of a nature which candidates should be able to answer without special study.

compression and combined forces. Codal provisions for slabs, beams walls and footings. Working stress method of design of R. C. members.

(b) WATER RESOURCES ENGINEERING

Principles of prestrcssed concrete design, materials, methods of prestressing, losses. Designs of simple members and determinate structures. Introduction of prestressing of indeterminate structures.

Design of brick masonry as per I.S. Codes.

6. CONSTRUCTION PRACTICE, PLANNING AND

MANAGEMENT

Concerting Equipment:

Weight Batcher, mixer vibrator, batching plant,

concrete pump.

Water resources of the globe; Multipurpose uses of Water: Soil-Plant-Water relationship, irrigation systems, water demand assessment; Storages and their yields, gToundwaier yield and well hydraulics; Water-logging, drainage design; irrigation revenue; Design of rigid boundary canals, Lacey's and Tractive force concepts in canal design, lining of canals; Sediment transport in canals; Non-overflow and overflow sections of gravity dams and their design. Energy dissipators and tailwater rating; Design of headworks distribution works, falls, cross-drainage works, outlets; River raining.

Cranes, hoists, lifting equipment. Earthwork

ENVIRONMENTAL ENGINEERING Equipment:

3 (a) WATER SUPPLY ENGINEERING Power shovel, hoe, dozer, dumper, trailers and

tractor, rollers, sheep foot rollers pumps.

Construction, Planning and Management:

Sources of Supply, yields, design of intakes and conductors; Estimation of demand; Water quality standards, Control of Water-borne diseases; Primary and secondary treatment detailing and maintenance of treatment units; Conveyance and distribution systems of treated water, leakages and control; Rural water supply; Institutional and industrial water supply.

Bar chart, linked bar chart, work-break down structures, Activity-on-arrow diagrams; Critical path, probabilistic activity durations. Event-based networks, PERT network ; Time-cost study, crashing ; resource allocation.

(b) WASTE WATER ENGINEERING PAPER-n

1 (a) FLUID MECHANICS, OPEN CHANNEL,

FLOW, PIPE FLC /

Fluid Properties, P ', -" Thrust, Buoyancy; Flow

Urban rain water disposal: Systems of sewage collection and disposal; Design of sewers and sewerage systems; pumping. Characteristics of sewage and its treatment. Disposal of products of sewage treatment, stream flow rejuvenation; Institutional and industrial sewage management; Plumbing Systems; Rural and semi urban sanitation.

(c) SOLID WASTE MANAGEMENT

Source, classification, collection and disposal;

Design and Management of Landfills.

(d) AIR AND NOISE POLLUTION AND ECOLOGY kinematics; lntegratU * \ " tnow equations; Flow measurement; Relative nM.>n Moment of momentum; Viscosity, Boundary layer and control. Drag, Lift : Dimentional Analysis. Modelling Cavitation; Flow oscillations; Momentum and Energy principles in open channel flow. Flow controls, Hydraulic jump, Flow section and properties; Nornul flow. Gradually varied flow: Surges, Flow development nnd losses in pipe flows, Measuremen, Siphons, SuTgcs and Water hammer. Delivery of Power, Pipe networks

(b) HYDRAULIC MACHINES AND

Sources and effects of air pollution, monitoring of air pollution; Noise pollution and Standards; Ecological chain and balance, Environmental assessment.

HYDROPOWER

4 (ft) SOIL MECHANICS

Centrifugal pumps, types, performance parameters, scaling pumps in parallel. Reciprocating pumps, air vessels, performance parameters, Hydraulic ram, Hydraulic turbines types, performance parameters/ controls, choice, power houses, classification and layout, storage, pondage, control of supply.

2. (a) HYDROLOGY

Hydrological cycle, precipitation and related data

Properties of soils, classification and interrelationship. Compaction behaviour, methods of compaction and their choice; Permeability and seepage, flownets. Inverted filters; Compressibility and consolidation; Shearing resistance, Stresses and failure; Soil testing in laboratory and in situ; Stress path and applications; Earth pressure, theories. Stress distribution in soils; Soil exploration, samplers, load tests penetration tests.

(b) FOUNDATION ENGINEERING

Types of foundations. Selection criteria, bearing capacity, settlement, laboratory and field tests; Types of piles and their design and layout. Foundations on analysis, PMP unit and synthetic hydrographs; Evaporation and transpiration; Floods and their management, PMF, Streams and their gauging: River morphology; Routing of floods; Capacity of Reservoirs.

expansive soils, swelling and its prevention foundation on swelling soils.

engines Engine Cooling, Emission and Control, Fuel gas analysis. Measurement of Calorific values. Conventional and Nuclear fuels. Elements of Nuclear power production.

5 (a) SURVEYING

Classification of surveys, scales accuracy; Measurement of distances—direct and indirect methods; optical and electronic devices; Measurement of directions, prismatic compass, local attraction; Theodolities-types; Measurement of elevations-Spirit and trigonometric levelling, Relief representation; Contours; Digital elevation modelling concept; Establishment of control by triangulation and traversing—measurements and adjustment of observations computation of coordinates; Field astoronomy. Concept of global positioning system; Map preparation by plane tabling and by photogrammetry Remote sensing concepts, map substitutes.

2. Heat Transfer and Refrigeration and (b) TRANSPORTATION ENGINEERING

Airconditioning Modes of heat transfer. One dimensional steady and unsteady condition. Composite slab and Equivalent Resistance. Heat dissipation from extended surfaces. Heat exchangers Overall heat transfer coefficient. Empirical correlations for heat transfer in laminar and turbulent flows and for free and forced Convection. Thermal boundary layer over a flat plate. Fundamentals of diffusive and convective mass transfer. Block, body and basic concepts in Radiation Enclosure theory. Shape factor. Net work analysis. Heat pump and Refrigeration cycles and systems. Refrigerants. Condensers. Evaporators and expansion devices. Psychromctry, Charts and application to airconditioning. Sensible heating and cooling. Effective temperature. Comfort indices, Load calculations. Solar refcrigcration. Controls, Duct design.

3. FLUID MECHANICS

Planning of highway systems, alignment and geometric design horizontal and vertical curves, grade separation; Materials and construction methods for different surfaces and maintenance; Principles of payment design; Drainage, Traffic Surveys; Intersection, signalling; Mass transit system, accessibility, networking.

Tunnelling, alignment, methods of construction, disposal of muck, drainage lighting and ventilation, traffic control, emergency management.

Planning of railway systems, terminology and designs relating to gauge, track, controls transits, rolling stock, tractive power and track modernisation; Maintenance, Appurtenant works, Constainnerisation.

Harbours—layouts, shipping lansc, anchoring, location identification, Literal transport with erosion and deposition; Sounding methods. Dry and wet docks, components and operations; Tidal data and analysis.

Properties and classification of fluids, Manometry. Forces on immersed surfaces. Center of pressure, Buoyancy, Elements of stability of floating bodies. Kinematics and Dynamics, irrotational and in- compressible, inviscid flow, velocity potential, Pressure field and Forces on immersed bodies Bernoulli's equations. Fully developed flow through pipes. Pressure drop calculations. Measurement of flow rate and Pressure, drop. Elements of boundary layer theory. Integral approach. Laminar and turbulent flows. Separations, Flow over weirs and notches. Open channel flows. Hydraulic jump. Dimensionless numbers Dimensional analysis, Similitude and modelling. One- dimensional isentronic flow, Normal shock wave. Flow through convergent—divergent ducts. Oblique shock- wave, Ravleigh and Fanno lines.

4. FLUID MACHINERY AND STREAM GENERA-

TORS

Airports—layout and orientation, Runway and Taxiway: design and drainage management, Zoning laws; Visual aids and air traffic control; helipads, hangers, service equipment.

MECHANICAL ENGINEERING

(For both objective and conventional type papers)

PAPER -1

Performance, Operation and control of hydraulic Pump and impulse and reaction Turbines. Specific speed Classification. Energy transfer. Coupling Power, transmission, Steam generators. Fire-tube and water-tube boilers, Flow of steam through nozzles and diffusers. Wetness and condensation. Various types of steam and gas turbines Velocity diagrams. Partial admission Reciprocating, Centrifugal and axial flow Compressors, Multi-stage compression, role of Mach Number, Reheat, Regeneration, Efficiency. Governace.

PAPER II

5. THEORY OF MACHINES

1. Thermodynamics, Cycles and 1 C Engines, Basic concepts. Open and Closed systems. Heat and work, Zeroth, First and Second Law, Application to non-flow and Flow processes. Entropy, Availability, irreversibility and Tds relations. Clapcyron and real gas equations. Properties of ideal gases and vapours. Standard vapour. Gas power and Refrigeration cycles. Two stage compressor. C. I. and S. I. Engines. Pre-ignition, Detcnation and Diesel-knock, Fuel injection and Crw'.i"i;ition Supercharging Tubro-prop and Rocket Kinematic and dynamic analysis of planner mechanisms, Cams. Gears and gear trains. Flywheels,4 6 THE GAZETTE OF INDIA : EXTRAORDINARY [PART I—SEC. 1] Governors, Balancing of rigid rotor and field balancing. Balancing of single and multicylinder engines. Linear vibration analysis of mechanical systems. Critical speeds and whirling of shafts. Automatic Controls,

Fits and tolerances, Measurement of surface texture. Comparators, Alignment tests and reconditioning of Machine Tools.

10. INDUSTRIAL ENGINEERING

6. MACHINE DESIGN

Design of Joints ; cotters, keys, spines, welded joints, threaded fasteners, joints formed by interference fits.

Design of friction drives: couplings and clutches, belt and chain drives, power screws.

Design of Power transmission systems : gears and gear drives, shaft and axle, wire ropes.

Design of bearings, Hydrodynamic bearings and rolling element bearings,

Production, Planning and Control: Forecasting— Moving average exponential smoothing, Operations scheduling; assembly line balancing Product development. Break-even analysis, capacity planning, PERT and CPM.

Control Operations : Inventory control—ABC analysis EOO model. Materials requirement planning. Job design, Job standards. Work measurement, Quality management— Quality analysis and control.

7. STRENGTH OF MATERIALS

Operations Research : Linear programming— Graphical and Simplex methods, Transportation and assignment models, Single server queuing model, Value Engineering : Value analysis for cost/value.

11. ELEMENTS OF COMPUTATION

Stress and strain in two dimensions. Principal stresses and strains, Mohr's construction, linear clastic materials, isotropy and anisotropy, stress-strain relations, uniaxial loading, thermal stresses, Beams : Bending moment and shear force diagram, bending stresses and deflection of beam. Shear stress distribution. Torsion of shafts, helical springs. Combined stresses, thick-and thin walled pressure vessels, Struts and Columns. Strain energy concepts and theories of failure,

Computer Organisation, Flow charting. Features of Common Computer Languages—FORTRAN, d' Base III. Lotus 1-2-3, C and elementary programming.

ELECTRICAL ENGINEERING

(for both objective and conventional type papers) 8. ENGINEERING MATERIALS

PAPER-I

1. K M Theorty

Basic concepts on structure of solids, Crystalline materials, Deffects in crystalline materials, Alloys and binary phase diagrams, structure and properties of common engineering materials. Heat treatment of steels. Plastics, Ceramics and composite materials. Common applications of various materials.

Electric and magnetic fields, Gauss's Law and Awpres Law, Fields in dielectrics, conductors and magnetic materials. Maxwell's equations. Time varying fields. Plane-Wave propagation in dielectric and conducting media. Transmission lines,

9. PRODUCTION ENGINEERING

2. Electrical Materials

Metal Forming : Basic Principles of Forming, drawing and extrusion; High energy rate forming; Powder metallurgy.

Metal Casting : Die casting, investment casting, Shell Moulding, Centrifugal Casting, Gating and Rising design; melting furnaces.

Band Theory, Conductors, Semi-conductors and Insulators, Super-Conductivity. Insulators for electrical and electronic applications. Magnetic materials, Ferro and feri-magnetism. Ceramics, properties and applications. Hall effect and its applications. Special semiconductors.

3. Electrical Circuits

Fabrication Processes : Principles of Gas, Arc. Shielded arc Welding; Advanced Welding Processes; weldability; Metallurgy of Welding.

Metal Cutting : Turning, Methods of Screw Production. Drilling, Boring. Milling, Gear Manu- facturing. Production of flat surfaces, Grinding and Finishing Processes. Computer Controlled Manufacturing Systems—CNC, DNC, FMS, Automation and Robotics.

Circuit elements, Kirchoffs Laws Mesh and nodal analysis. Network theorems and applications. Natural response and forced response. Transient response and steady-stat response for arbitrary inputs. Properties of networks in terms of poles and zeros, Transfer function. Resonant circuits. Three-phase circuits, Two-port network. Elements of two-element network systhesis.

4. Measurements and Instrumentation

Cutting Tool Materials, Tool Geometry Mechanism of Tool Wear, Tool Life and Machinability; Measurement of cutting forces. Economics of Machining. Unconventional Machining. Processes, Jigs and Fixtures.

Units and Standards. Error analysis. Measurement of current, Voltage Power, Power-factor and energy. Indicating instruments. Measurement of resistance.

inductance. Capacitance and frequency. Bridge Measurements. Electronic measuring instrument, digital voltmeter and frequency counters. Transducers and their applications to the measurement of non-electrical quantities like temperature, pressure, flow-rate displacement, acceleration, noise level etc. Data acquisition systems. A/D. and D/A Converters.

Power transmission lines. Modelling and performance characteristics. Voltage control. Load flow studies, Optimal power system operation. Load frequency control. Symmetrical short circuit analysis. Z-Bus formulation Symmetrical Components. Per unit representation. Fault analysis. Transient and steady-state stability of power systems. Equal area criterion.

5. Control Systems

Power system Transients. Power system Protection Circuit breakers Relays, HVDC transmission.

3. Analog and Digital Electronics and Circuits

Mathematical modelling of physical systems. Block diagrams and signal flow graphs and their reduction. Time domain and frequency domain analysis of linear dynamical system. Errors for different types of inputs and stability criteria for feedback systems. Stability analysis using Routh-Hurwitz array, Nyquist plot and Bode plot. Root locus and Nicols chart and the estimation of gain and phase margin. Basic concepts of compensator design. State variable matrix and its use in system modelling and design. Sampled data system and performance of such a system with the samples in the error channel. Stability of sampled data system. Elements of nonlinear control analysis, Control system component, electromechanical hydraulic pneumatic components.

Semiconductor device physics, PN junctions and transistors, circuits Models and parameters, FET Zener tunnel, Schotiky, photo diodes and their applications, rectifier circuits voltage ragulators and multipliers, switching behaviour diodes and transistors.

PAPER—11

1. Electrical Machines and power transformers.

Magnetic Circuits— Analysis and Design of Power transformers. Construction and testing. Equivalent circuits, losses and efficiency. Regulation. Auto- transformer. 3-phase transformer. Parallel operation.

Basic concepts in rotating machines. EMF, torque, basic machine types. Construction and operation, leakage, losses and efficinecy.

Small signal amplifiers biasing circuits, frequency response and improvement, multistage amplifiers and feed-back amplifiers, D C. amplifiers. Oscillators, Large signal amplifiers, coupling methods, push pull amplifiers, operational amplifiers, wave shaping circuits Multivibrators and flip-flops and their applications. Digital logic gate families, universal-gates-combinational circuits for arithmetic and logic operation sequential logic circuits. Counters Registers. RAM and ROMs.

4. Microprocessors

Microprocessor architecture—Instruction set and simple assembly language programming. Interfacing for memory and I/O Applications of Microprocessors in power system.

5. Communication Systems

D C. Machines, Construction. Excitation methods, Circuit models Armature reaction and communication. Characteristics and performance analysis. Generators and motors. Starting and speed control. Testing Losses and efficiency.

Types of modulation; AM, FM and PM, Demodulators, Noise and bandwidth consideration. Digital communication systems. Pulse code modulation and demodulation. Elements of sound and vision broadcasting Carrier communication. Frequency division and time division multiplexing. Telemetry system in power engineering.

6. Power Electronics

Synchronous Machines. Construction, Circuit model. Operating characteristics and performance analysis. Synchronous reactance. Efficiency. Voltage regulation. Salient pole machine. Parallel operation. Hunting. Short circuit transients.

Induction Machines. Construction. Principle of operation. Rotating fields. Characteristics and performance analysis. Determination of circuit model. Circle diagram. Starting and speed control.

Fractional KW motors. Single-phase synchronous and induction motors.

Power Semiconductor devices, Thyristor, Power transistor, GTOs and MOSFETs. Characteristics and operation. AC to DC Converters; 1-phase and 3-phasc DC to DC Converters.

AC regulators. Thyristor controlled reactors, switched capacity networks.

2. Power systems

Types of power Station Hydro, Thermal and Nuclear Stations. Pumped storage plants. Economics and operating factors.

Inverters : Single-phase and 3-phase. Pulse width modulation. Sinusoidal modulation with uniform sampling. Switched mode power supplies.

ELECTRONICS & TELECOMMUNICATION ENGINEERING

(For both objective and conventional type papers) basics of waveguides and resonators; Elements of antenna theory.

6. Electronic Measurements and Instrumentation

PAPER—I

1. Materials and components

Basic concepts standards and error analysis; Measurements of basic electrical quantities and parameters; Electronic measuring instruments and their principles of working: analog and digital, comparison characteristics, applications Transducers; Electronic measurements of non-electrical quantities like temperature, pressure, humidity etc. Basics of telemetry for industrial use.

PAPER— II

Structure and properties of Electrical Engineering materials Conductors, semiconductors and Insulators, Magnetic, Ferroelectric, piezoelectric Ceramic, Optical and Superconducting materials. Passive components and characteristics Resistors, Capacitors and Inductors: Ferritcs, Quartz crystal, Ceramic resonators, Electromagnetic and electro-mechanical components.

1. Analog Electronic Circuits

2. Physical Electronics, Electron Devices and ICs

Electrons and holes in semiconductors, Carrier Statistics, Mechanism of current flow in a semiconductor, Hall effect, lunction theory; Different types of diodes and their characteristics; Bipolar lunction transistor; Field effect transistors; Power switching devices like SCRs. CTOs, power MOSFETs; Basics of ICs-bipolar, MOS and CMOS types; Basics of Opto-Electronics.

3. Signals and Systems

Transistor biasing and stabilization. Small signal analysis. Power amplifiers. Frequency response. Wide banding techniques, Feedback amplifiers. Tuned amplifiers. Oscillators, Rectifiers and power; supplies Op Amp. PLL, other linear integrated circuits and applications. Pulse shaping circuits and waveform generator.

2. Digital Electronic Circuits

Classification of signals and systems; System modelling in terms of differential and difference equations; State variable representation; Fourier series; Fourier transforms and their application to system analysis; Laplace transforms and their application to system analysis; Convolution and superposition integrals and their applications; Z-transforms and their applications to the analysis and characterisation of discrete time systems; Random signals and probablity. Correlation functions, Spectral density; Response of linear system to random inputs,

Transistor as a switching clement; Boolean algobra simplification of Boolean functions, Karnaugh man and applications' IC Logic gates and their characteristics: 1C logic families: DTL, TTL, ECL, NMOS, PMOS and CMOS gates, and their comparison. Combinational logic circuits; Half adder, Full adder; Digital compartor; Multiplexer, Demultiplexer; ROM and their applications Flipflops, R-S, J.K., D and T np-nops; Different types of counters and resisters; Waveform generators. A/D and D/ A converters. Semiconductor memories.

3. Control Systems

4. Network Theory

Network analysis techniques: Network theorems, transient response steady state sipusoidal response; Network graphs and their applications in network analysis; Tcllegen's theorem Two port networks : Z, Y, h and transmission parameters Combination of two ports analysis of common two ports. Network functions; parts of network functions; obtaining a network function from a given part. Transmission criterion: daley and rise time, Elmore's and other definition effect of cascading Elements of network synthesis.

5. Electromagnetic Theory

Analysis of electrostatic and magnctostatic fields; Laplace's and Potson's equations; Boundary value problems and their solutions; Maxwell's equations, application to wave propagation in bounded and unbounded media; Transmission lines : basic theory, standing wave, matching applications microstrip lines;

Transient and steady state response of control systems, Effect of feedback on stability and sensivity; Root locus techniques; Frequncy response analysis. Concepts of gain and phase margins; constant-M and Consta. N Nichols's Chart; Approximation of transient response from Constant-N nichols Chart; Approximation of transient response from closed loop frequency response; Design of Control systems. Compensators; Industrial controllers.

4. Communication Systems

Basic information theory; Modulation and detection in analogue and digital systems; Sampling and data reconstruction. Quantization & Coding, Time division and frequency division multiplexing. Equalization; Optical Communication: in free space & fibre optic; Propagation of signals at HF, VHF, UHF and microwave frequency; Statcllile Communication.

5. Microwave Engineering

Microwave Tubes and solid state devices, Microwave generation and amplifiers, Waveguides and other Microwave Components and Circuits, Microstrip circuits. Microwave Antennas. Microwave Measurements, Masers Lasers; Microwave propagation, Microwave Communication systems-terrestrial and Satellite based.

However, the X-ray of the chest will be done in respect of only such candidates who are directed to appear before the Medical Board for Part II of the medical examination.

(b) However, for certain Services the Minimum standards for height and chest girth, without which candidate cannot be accepted are as follows :—

6. Computer Engineering

Number Systems; Data representation; Pro- gramming; Elements of a high level programming language PASCAL/ C. Use of basic data structures; Fundamentals of computer architecture, Processor design; Control unit design; Memory organisation. I/o System Organisation. Microprocessors : Architecture and instruction set of microprocessors 8085 and 8086. Assembly langu' . programming. Micro-processor based system design : typical examples. Personal computers and their typical uses.

APPENDIX II

REGULATIONS RELATING TO THE PHYSICAL EXAMINATION OF CANDIDATES * [These regulations are published for the convenience of candidates and in order to enable them to ascertain the probability of their coming up to the required physical standard, the regulations arc also intended to provide guidelines to the medical examiners and a candidate who docs not satisfy the minimum requirements prescribed in the regulations cannot be declared fit by the medical examiners. However, while holding that a candidate is not fit according to the norms laid down in these regulations, it would be permissible for a Medical Board to recommend to the Government of India for reasons specifically recorded in writing that he may be admitted to service without disadvantage to Government. 2 (a) the Government of India reserve to themselves absolute discretion to reject or accept any candidate after considering the report of the Medical Board.

2(b) To be passed as fit for appointment, a candidate must be in good mental and bodily health and free from any physical defect likely to interfere with the efficient performance of the duties of his/ her appointment.

3. (a) In the matter of the correlation of age, height and chest girth of candidates of Indian (including Anglo- Indian) race, it is left to the Medical Board to use whether correlation figures arc considered most suitable as a guide in the examination of the candidates, if there be any disproportion with regard to height, weight and chest girth, the candidates shoule be hospitalised for investigation and X-ray of the chest taken before the candidate is declared fit or not by the Board

207 GI/2001— 7

ieight

Name of Services I

Expan sion

1

Chest : girth fully expandec

al

B

Railway Engineering Service (Civil, Electrical Mechanical and Signal), Central Engineering Service Group A, CES (Roads), Central Electric &. Mechanical Engineering Service Group A in the C.P.W.D. Military Engineerin, Services, CWES.

152 cm.

5cm.

(a) For Male candidates

84 cm.

150 cm. 79 cm. 5cm.

(b) For Female Candidates

The minimum height prescribed is relaxablc in case of candidate belonging to Scheduled Tribes and to races such as Gorkhas, Garhwalis, Assamese, Nagaland Tribes, etc. whose average height is distinctly lower.

(c) For the Military Engineering Service and Indian Ordnance Factories Service Group a, a minimum expansion of 5 centimetres will be required in the matter of measurement of the chest.

4. The condidalc's height will be measured as follows:—

He will remove his shoes and be placed against the standard with his feet together and the weight thrown on the heels and not on the toes or other sides of the feet, he will stand erect without rigidly and with the heels, caves, buttocks and shoulders touching the standard, the chin will be repressed to bring the vertex of the head level under the horizontal bar and the height will be recorded in centimetres and parts of a centimetres to halves 5. The candidate's chest will be measured as follows :—

He will be made to stand erect with his feet together and to raise his arms over his head. The tape will be so adjusted round the chest that its upper edge touches the interior angles of the shoulders blades behind and lies in the same horizontal plane when the tape is taken round the chest. The arms will then be lowered to hang loosly by the side and care will be taken that the shoulders are5 0 THE GAZETTE OF INDIA : EXTRAORDINARY [PART I—SBC. 1] 2 1 3 : 4 6 5 not thrown upwards or backwards so as to displace the tape. The candidate will then be directed to take a deep inspiration several times and the maximum expansion of the chest will be carefully noted and the minimum and maximum will then be recorded in centimetres, 83—89, 86—93.5 etc. In recording the measurements fraction of less than half a centimetre should not be noted.

N.B.—The height and chest of the candidate should be measured twice before coming to a final decision.

6. The candidate will also be weighted and his weight recorded in kilograms—fraction of a Kilogram should not be noted.

7. The candidate's eye-sight will be tested in accordance with the following rules. The result of each test will be recorded:—

(i) General.—The candidate's eyes will be subjected lo a general examination directed to the detection of any disease or abnormality, The candidate will be rejected if he suffers from any morbid conditions of eye, eyelids or contiguous structure of such a sort as to render or are likely at future dale to render him unfit for Service,

(ii) Visual Acuity.—The examination for determining the acuteness of vision includes two tests—one for distant the other for near vision Each eye will be examined separately.

There shall be no limit for maximum nacked eye vision but the nacked eye vision of the candidates shall however, be recorded by the Medical Board or other medical authority in every case as it will furnish the basic information in regard to the conditions of the eye.

The standards for distant and near vision with or without glasses shall be as follows :—

Vision T

Service

Distant '

Vision

>Iear

Worse I Eye I

Worse Eye

Better ' Eye ] (cor- rected vision)

Jetter iye cor ( ected r dsion) ^

1 2

4

3

6

5 A. Technical

1. Railway Engine

2.

6/6

j/n

J/I

6/9

6/2 OR 6/9

T

f

Central Engineering Service Group A, i Central Electrical and Mechanical i Engineering Service Group A Central Wate Engineering Service Group A, Central Power Engineering Service Group A, Central Engineering Service (Roads) Group A and Post of Engineer Group A in WP&C Wing/ Monitoring Organisation, Ministr of Communications, Indian Naval Arma- ment Service, Indian Ordnance Factories Service Group A Border Road Engineering Service Group "A"

3. Assistant Executive Engineer (Group 'A') in the Corps of EME Military Engineer Service Group 'A'

B. Non-Technical

6/12 J/l JII

6/9

4. Indian Railway

Stores Service Drilling Engineer ' (Junior) Group "A"

r

(Mechanical Enginee (Junior) Group 'A' in G.S.I.

NOTE (1)

(a) In respect of the Technical Services mentioned at A above, the total amount of myopia (including the cylinder) shall not exceed—4.00 D. Total amount of Hypermetropia (including the cylinder) shall not exceed+4.00D.

> 6/1: j /n

6/i: 6/9

:ering 6/6 OR 6/9

Service (Civil, Electrical, Me- chanical and Signal)

Provided that in case a candidate in respect of the Servicf s classified as "Technical" (othcT than the Services under the Ministry of Railways) is found unfit on grounds of high myopia the matter shall be referred to a special boards of three Ophthalmologists to declare whether this myopia is Pathological or not In case it is not pathological the candidate shall be declared fit provided he fulfils the visual requirements otherwise.

(b) In every case of myopia fundus examination should be carried out and the results recorded. In the event of any pathological condition being present which is likely to be progressive and affect the efficiency of the candidate, he shall be declared unfit.

(c) Radial Keratotomy/lascr Correction etc. shall be considered as disqualification for appointment in Railway Technical Services (Civil, Mechanical, Electrical and Electronics). Permitted correction for conforming to prescribed visual standards is spectacles only.

NOTE (2)

The testing of colour vision shall be essential in respect of the Technical Services mentioned at A above.

Colour perception should be graded into higher and lower grade depending upon the size of aperture in the lantern as described in the table below :—

Grade

Higher Grade of colour preception

Lower Grade of colour preception 1,

16 feet

16 feet

Distance between the lamp and the candidate

1.3mm

Size of aperture

1.3 mm 2.

3. Time of exposure 5 seconds 5 seconds For the Railway Engineering Services (Civil, Electrical, Signal and Mechanical) and other service connected with the safety of the public, higher grade of colour vision is essential but for others lower grade of colour vision should be considered sufficient.

The categories of Services posts which require higher or lower grade colour perception areas indicated below :—

Technical Services or posts requiring higher grade colour Perception :—

(i) Railway Engineering Services.

(ii) Military Engineering Service (IDSE) and Surveyor Cadre.

(iii) Survey of India Group 'A' Service,

(iv) Central Engineering Service (Roads).

(v) Central Power Engineering Service, (vi) Border Roads Engineering Service, Group A. (vii) Assistant Executive Engineer (Group 'A') in the Corps of EME.

Technical Service or posts requiring lower grade colour Perception:—

(i) Central Engineering Service.

(ii) Central Electrical and Mechanical Engineering Service.

(iii) Indian Naval Armament Service,

(iv) Indian Ordnance Factory Service,

(v) Central Water Engineering Service.

(vi) Drilling Engineer (Junior) Group 'A' in Geological Survey of India.

(vii) Engineer Group 'A' in Wireless Planning and Coordination Wing/ Monitoring Organisation.

Satisfactory colour vision constitutes, recognition with case and without hesitation of Red, Green and Yellow colours. The use of Ishihara's plates, shown in good light and a suitable lantern like Edrige Green's shall be considered quite dependeble for resting colour vision, Both the Ishihara's plates and Edrige Green's lantern shall be used for testing colour vision of candidates for appointment to the Technical Services.

NOTE (3) Field of vision—The field of vision shall be tested in respect of all Services by the confrontation method. Where such test gives unsatisfactory or doubtful results the field of vision should be determined on the perimeter.

NOTE (4) For Night Blindness—Night blindness need not be tested as a routine but only in special cases. No standard test for the testing of night blindness or dark adaption is prescribed. The Medical Board should be given the discretion to improvise such rough test e.g. recording of visual acuity with reduced illumination or by making the candidate recognise various objects in a darkened room after he has been there for 20 to 30 minutes. Candidates own statements should not always be relied upon but they should be given due consideration.

NOTE (5) For Central Engineering Serviccs/CES (Roads)— Candidates may be required to pass the colour vision test and undergo test for night blindness when considered necessary by the Medical Board. For Survey of India Group 'A* Service the candidate may be required to pass a 'stereoscopic fusion' test.

NOTE (6) Ocular conditions, other than visual acuity—

(a) Any organic disease or a progressive refractive error, which is likely to result in lowering the visual acuity, should be considered as a disqualification.

(b) Squint : For technical services presence of binocular vision is essential. The presence of Squint, even if the vision acuity in each eye is of the prescribed standard should be considered a disqualification in the absence of binocularity. For non-technical services the presence of squint should not be considered as a disqualification if the visual acuity is of the prescribed standards.

(c) If a person has one eye or if he has one eye which has normal vision and the other eye is ambylyopic5 2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART I—SEC. 11 or has subnormal vision, the usual effect is that the person lacks stereoscopic vision for perception of depth. Such vision is not necessary for many civil posts. The medical board may recommend as fit, such persons provided the normal eye has—

(1) 6/6 distant vision and J/I near vision with or without glasses, provided the error in any meridian is not more than 4 dioptres for distant vision.

(ii) has full field of vision,

(iii) normal colour vision wherever required.

Provided the board is satisfied that the candidate can perform all the functions for the particular job in question.

The above relaxed standard of visual acuity will not apply to candidates for Posts/Services classified as "TECHNICAL".

NOTE (7) Contact Lenses :—During the medical examination of a candidate, the use of contact lenses is not to be allowed.

NOTE (8) It is necessary that when considering eye lest the illumination of the type letters for distant vision should have an illumination of 15 foot candles.

NOTE (9) It shall be open to Government to relax any one of the conditions n f?v

8. Blood Pressure

The Board will use n$ d ue ;Uon regarding Blood Pressure. A rough method of calculating normal, maximum, systolic pressure is as ijllows :-•—

(i) With young subjects IS--25 years of age the average is about 100 plus :>gc.

(ii) With subject over 25 years of age general rule of 110 plus half the age seems quite satisfactory.

N. B.—As a general rule any systolic prescription 140 mm and diastolic over 90 mm should be regarded as suspicious and the candidate should be hospitalised by (tic Board before giving their final opinion regarding the candidate's fitness or otherwise. The hospitalisation report should indicate whether the rise in blood pressure is of a transient nature due to excitement etc. or whether it is due to any organic disease. In all such cases X-ray and electro cardiographic examinations of heart and blood urea clearance test should also be done as routine. The final decision as to the fitness or otherwise of a candidate will, however, rest with the Medical board only.

Provided the patient and particularly his arm is relaxed, he may be either lying or sitting. The arm is supported comfortably at the patient's side in a more or less horizontal position. The arm should be free from clothes to the shoulder. The cuff completely deflated, should be applied with the middle of the rubber over the inner side of the arm and its lower edge an inch or two above the bend of the elbow. The following turns of cloth bandage should spread evenly over the bag to avoid bulging during inflation.

The brachial artery is located by palpitation at the bend of the elbow and the stethoscope is then applied lightly and centrally over it below, but not in contact with the cuff The cuff is inflated to above 200 mm. Hg. and then slowly deflated. The level at which the column stand when soft successive sounds are heard represents the Systolic Pressure. When more air is allowed to escape the sounds will be heard to increase in intensity The level at which the column well heard clear sounds change to soft muffled fading sounds' represents the diastolic pressure. The measurements should be taken in a fairly brief period of time as prolonged pressure of the cuff is irritating to the patient and will vitiate the readings. Re-checking if necessary, should be done only a few minutes after complete deflaction of the cuff. (Sometimes as the cuff is deflated sounds are heard at a certain level they may disappear as pressure falls and reappear at a still lower level. This "Silent Gap" may cause error in reading.) 9. The urine (passed in the presence of the examiner) should be examined and the results recorded. When a Medical Board finds sugar present in a candidate's urine by the usual chemical tests the Board will proceed with the examination with all its other aspects and will also specially note any signs or symptoms suggestive of diabetes. If except for the glycosuria the Board finds the candidate conforms to the standards of medical fitness required they may pass the candidate "fit subject to the Glycosuria 'being non-diabetic' and the Board will refer the case to a specified specialist in Medicine who has hospital and laboratory facilities at his disposal The Medical specialist will carry out whatever examinations, clinical and laboratory he considers necessary including a standard blood sugar tolerance test and will submit his opinion to the Medical Board upon which the Medical Board will base its final opinion fit or unfit. The candidates will not be required to appear in person befroe the Board on the second occasion. To exculdc the effects of medication it may be necessary to retain candidate for several days in hospital under strict supervision.

Method of taking Blood Pressure

The mercury manometer type of instrument should be used as a rule. The measurement should not be taken within fifteen minutes of any exercise of excitement.

10. A woman candidate who has a result of test is found to be pregnant ofl2 weeks standing or over should be declared temporary unfit until the confinement is over. k"Shc should be re-examined for a fitness certificate six weeks after the date of confinement subject to the53 1 2 3 production of a medical certificate of fitness from a registered medical practitioner. 11. The following additional points should be observed :—

(a) that the candidate's hearing in each ear is good and that there is no sign of disease of the ear. In case it is defective the candidate should be got examined by the ear specialist. Provided that if the defect in hearing is remediable by operation or by use of a hearing aid a candidate cannot be declared unfit on the account provided he/she has no progressive disease in the ear. This provision is not applicable in the case of Railway Services, other than Indian Railway Stores Services, the Military Engineer Services, the Indian Telecommunication Service Group A, Central Engineering Service Group A, CES (Roads), Central Electrical Engineering Service Group 'A' Engineering (Group 'A') in Wireless Planning and Coordination Wing/ Monitoring Organisation and the Border Roads Engineering Service Group' A'. The following are the guidelines for the medical examining authority in this regard:—

1 2

3

(1)

(2)

Fit for non-technical job i f the deafness is upto 30 dcciblcs in higher frequency, Fit in respect of both tech- nical and non-technical jobs if the deafness is upon 30 decibles in speech frequen- cies of 1000 to 4000.

(3)

Marked for total deafness in one ears other being normal. Perceptive deafness in both cars in which some improvement is possible by a hearing aid. Perforation of tympanic membrance of Central or marginal type.

(4) Ears with mastoid cavity sub normal hearing on one side/ on both sides.

(i) One ear normal other car Perforation of tympanic embrance present temporarily unfit. Under improved condi- tions of Ear Surgery a candi- date with marginal or other Perforation in both ears should be given a chance by declaring him temporarily un- fit and then he may be con- sidered under 4 (ii) below, (ii) Marginal or attic per- foration in both ears Unfit, (iii) Central perforation both ears— Temporarily unfit. (i) Either ear normal hearing other car, Mastoid cavity- Fit for both technical and non-technical jobs, (ii) Mastoid cavity of both sides Unfit for technical jobs—Fit for non-technical jobs if hearing improves to 30 decibles in either ear with or without hearing aid.

Persistently dis- Temporarily Unfit for both (5)

(6)

(7)

charging ear. operated/unoperated Chronic inflammatory/ allergic conditions of nose with or without bony deformities of nasal septum. Chronic inflam- matory/condition of tonsils and/or Larynix.

(8)

technical and non-technical jobs. r(i) A decision will be taken as per circumstance of individual cases. If deviated nasal septum is present with Symptoms Temporarily Unfit (i) Chronic inflammatory con- ditions of tonsils and/or Laiynix-Fit. (ii) Hoarseness of voice of severe degree if present then- Temporariry Unfit. (i) Benign Tumours— Temporarily Unfit, Benign or locally malignant tumours oftheE.N.T.

Otosclerosis.

(9)

(10) Congenital defects of ear, nose or throat.

Nasal Poly

(ii) Malignant Tumours-Un- fit. If the hearing is within 30 decibles after operation or with the help of hearing aid Fit (i) If non-interfering with functions-Fit, (ii) Stuttering of severe de- gree-Unfit. Temporarily Unfit.

(11)

(b) that his/her speech is without impediment;

(c) that his/her teeth are in good order and he/she is provided with dentures where necessary for effective mastication (well filled teeth) will be considered as sound;

(d) that the chest is well formed and his chest expansion is sufficent; and that his heart and lungs are sound;

(e) that there is no evidence of any abdominal diseases;

(f) that he is not raptured;

(g) that he does not suffer from hydrocele, varicose, veins or piles;

(h) that his limbs, hands and feet are well formed and developed and that there is free and perfect motion of all his joints;

(i) that he does not suffer from any inverterate skin disease;

(j) that there is no congenital malformation or defect;

(k) that he does not bear traces of acute chronic disease pointing to an impaired constitution;

(1) that he bears marks of efficient vaccination; and (m) that he is free from communicable disease.

12. Radiographic examination of the chest for detecting any abnormality of the heart and lungs, which may not be apparent by ordinary physical examination will be restricted to only such candidates who are declared finally successful at the concerned Engineering Services Examination.

The decision of the Chairman of the Central Standing Medical Board (conducting the medical examination of the concerned candidate) about the fitness of the candidate shall be final.

13. In case of doubt regarding health of a candidate the Chairman of the Medical Board may consult a suitable Hospital Specialist to decide the issue of fitness or unfitness of the candidate for Government Service e.g. if a candidate is suspected to be suffering from any mental defect or aberration; the Chairman of the Board may consult a Hospital Psychiatrist/Psychologist etc.

When any defect is found it must be noted in the Certificate and the medical examiner should state his opinion whether or not, it is likely to interfere with the efficient performance of the duties which will be required of the candidate.

14. The Candidates who desire to file an appeal against the decision of the Medical Board are required to deposit an appeal fee of Rs. 50/- in such a manner as may be prescribed by the Government of India, Ministry of Railways (Railway Board) in this behalf. This fee will be refundable only to those candidates who are declared fit by the Appellate Medical Board whereas in the case of others it will be forfeited. Alongwith, appeal the candidates must, submit a medical certificate by a registered doctor specifically mentioning that he is aware of the candidate having been declared unfit by a Medical Board. Candidates must have a copy of this certificate when, they present themselves before the Medical Board, The appeals should be submitted within 21 days of the date of communication in which the decision of the first Medical Board is conveyed to the candidate; otherwise request for medical examination by an appellate Medical Board will not be entertained. The medical examination by the Appellate Medical Board will be arranged only a candidate's own cost. No travelling allowance or daily allowance will be admissible for the journeys performed in connection with the medical examination of the Appellate Medical Board. Necessary action to arrange medical examination by the Appellate Medical Board will be taken by the Ministry of Railways (Railway Board) on receipt of appeals accompanied by the prescribed fee within the stipulated time.

15. The decision of the Appellate Medical Board will be final and no appeal shall be against the same.

Medical Board's Report

The following intimation is made for the guidance of the Medical Examiner:

1. The standard of physical fitness to be adopted should make due allowance of the age and length of service, if any of the candidate concerned.

No person will be deemed qualified for admission to the Public Service who shall not satisfy Government or the appointing authority as the case may be that he has no disease, constitutional affliction, or bodily in- firmity, unfitting him or likely to unfit him for that service.

It should be understood that the question of fitness involves the future as well as the present and that one of the main objects of medical examina- tion is to secure continuous effective service and in the case of candidates for permanent appoint- ment to prevent early pension or payment in case of premature death. It is at the same time to be noted that the question is one of the likelihood of continuous effective service, and that rejec- tion of a candidate need not be advised on ac- count of the presence of a defect which in only a small proportion of cases is found to interfere with continuous effective service.

A lady doctor will be co-opted as a member of the Medical Board whenever a woman candidate is to be examined.

The report of the Medical Board should be treated as confidential.

In case where a candidate is declared unfit for ap- pointment in the Government service, the ground for rejection may be communicated to the candidate in broad terms without giving minute details regarding the defects pointed out by the Medical Board.

In case where a Medical Board considers that a mi- nor disability disqualifying a candidate for Gov- ernment service can be cured by treatment (medical or surgical) a statement to that effect should be recorded by the Medical Board. There is no objection to a candidate being in- formed of the Board's opinion to this effect by the appointing authority and when a cure has been effected it will be open to the authority concerned to ask for another Medical Board.

In the case of candidates who are to be declared "Tem- porarily Unfit" the period specified for re-exami- nation should not ordinarily exceed six months at the maximum. On re-examination after the specified period these candidates should not be declared temporarily unfit for a further pe- riod but a final decision in regard to their fitness for appointment or otherwise should be given.

The Medical re-examination shall be deemed to be part of the 1st Medical Examination and candidates may, if they so desire, appeal against its decision.

(a) Candidate's statement and declaration.

The candidate must make the Statement required below prior to his Medical Examination and must sign the declaration 'appended thereto'. Their attention is specially directed to the warning contained in the Note below:—

1. State your name in full (in block letters) 2. State your age and birth place

2. (a) Do you belong to races such a Gorkhas, Garhwalis, Assamese, NagalandTribals etc. whose average height is distinctly lower ? Answer 'Yes' or 'No' and if the answer is 'Yes' state the name of the tribe race

5. Furnish the following particulars concerning your family .

Father'sage if living and state of health

Father'sage at death and cause of death

No. of brothers dead, their ages and cause of death

No. of brothers living their ages and state of health

(2)

(4)

(3)

(1)

6. Have you been examined by a Medical Board before ?

7. If answer to the above is 'Yes' please state what Servicc(s)/post(s) you were examined for ?

8. Who was the examining authority ?

9. When and where was the Medical Board held ?

10. Result of the Medical Board's examination, if communicated to you or if known:

11. All the above answers are to the best of my knowledge and belief, true and correct and I shall be liable for action under law for any material infirmity in the 3. (a) Have you ever had small pox, intermittent or any other fever, enlargement or suppuration of glands, spitting of blood asthma, heart disease, lungs disease, fainting attacks rheumatism appendicitis

or

(b) Any other disease or accident requiring confinement to bed and medical or surgical treatment ?

(c) Whether underwent myopic correction (Radial Keratotomy/Lasik/Excimer etc. etc.) at any time. If yes details thereof.

4. Have you suffered from any form of nervousness due to over work or any other causes.

Mother's age if living and state of health

Mother's age at death and cause of death

No. of sisters living their ages and state of health

No, of sisters dead their ages and cause of death

(7)

(6)

(5)

information furnished by me or suppression of relevant material information. The furnishing of false information or suppression of any factual information would be a disqualification and is likely to render me unfit for employment under the Government. If the fact that false information has been furnished or that there has been suppression of any factual information comes to notice at any time during my service, my services would be liable to be terminated.

Candidate's Signature

Signed in my presence Signature of the Chairman of the Board

PROFORMA-I

(b) Report of the Medical Board on (name' of candidate) Physical examination

1. General development Good Fair. Poor. Nutrition. Thin56 THE GAZETIEOFINDIA: EXTRAORDINARY [PART I—SEC. 1] average Obese Height (without shoes) Weight Best Weight

When ? Any recent change in weight Temperature

Girth of chest:—

(1) (After full inspiration)

(2) (After full expiration)

2. Skin any obvious disease

3. Eyes

(1) Any disease

(2) Night Blindness

(3) Defect in colour vision

(4) Fieldpf vision

(5) Visualacuity.

(6) Fundus Examination

9. Abdomen :Girth

Tenderness Hernia

(a) Palpable: Liver, Spleen

Kidneys Tumours

(b) Haemorhoids Fistula

10. Nervous System: Indications of nervous or mental disabilities

11. Loco-Motor System: Any abnormality.

12. Genito Urinary System : Any evidence of Hydrocele, Varicoccle etc. Urine analysis:

(a) Physical Appearance

(b)Sp.Gr.

(c)Albumien.

(d) Sugar.

(e) Casts

(f) Cells

Strength of glasses

Sph. Cyl. Axis

Acuity of vision

Naked eye

With glasses

Distant

RE.

vision

LE

RE.

Near

vision

LE.

Hypermatropia

RE.

LE.

(Manifest)

4. Ears: Inspection

Hearing: Right Ear.

Left Ear.

5. Glands Thyroid

6. Condition of teeth

7. Respiratory System; Does physical examination reveal anything abnormal in the respiratory organs?

If yes, explain fully.

8. Circulatory system;

(a) Heart: Any organic lesions ?

Rate Standing

After hopping 25 times

Two minutes after hopping

(b) Blood Pressure: Systolic

Diastouc

13. Is there anything in the health of the candidate likely to render him unfit for the efficient discharge of his duties in the Service for which he is a candidate?

NOTE : In the case of a female candidate, if it is found that she is pregnant of 12 weeks standing or over, she should be declared temporarily unfit, vide Regulation 9.

14. For which services of the following five categories has the candidate been examined and found in all respect qualified for the efficient and continuous discharge of his duties and for which of them is he considered unfit:—

(i) Railway Engineering Services Gr. A (Civil, Electrical, Mechnical and Signal), CES (Gr. A), CE&MES (Gr. A), CWES Gr. A, CES (Rds.) Gr. A and MES Gr. A. (ii) IIS Gr. A, CPES Gr. A, Assistant Executive Engineer and Assistant Engineer, P&T Building Works, Posts of Engineering Gr A (WP&C Wing Monitoring Organisation), IBS, INAS Gr. A. BRES Gr, A. (iii) Assistant Executive Engineer (Group A) and Assistant Engineer (Group B) in the corps of EME, Ministry of Defence, Survey of India.

(iv) IOFSGr.A.

(v) IRSS Gr. A, ISS Gr, A Drilling Engineer (Jr.) Group 'A', Mechnical Engineer (Jr.) Group 'A' in GSI.

Is the candidate fit for Field Service ?

NOTE: (I): The Board should record their findings under one of the following three categories:

(i) Fit

(ii) Unfit on account of

(iij) Temporarily unfit on account of.

NOTE:(H): The candidate has not undergone chest X-Ray test. In view of this, the above findings are not final and are subject to the report on chest X-Ray test.

Place:

Date:

1. INDIAN RAILWAY SERVICE OF ENGINEERS, INDIAN RAILWAY SERVICE OF ELECTRICAL ENGINEERS, INDIAN RAILWAY SERVICE OF SIGNAL ENGINEERS, INDIAN RAILWAY SERVICE OF MECHANICAL ENGINEERS AND INDIAN RAILWAY STORES SERVICE.

Signature

Chairman

Member

Member

Seal of Medical Board

PROFORMAH

Candidate's Statement/Declaration 1. State your Name:

(in block letter)

2. Roll No.

(a) Probation:—Candidates recruited to these Services will be on probation for a period of three years during which they will undergo training for two years and put in minimum of one year's probation in working post If the period of training has to be extended in any case, due to the training having not been completed satisfactorily, the total period of probation will be correspondingly extended. Even if the work during the period of probation in the working post is found not to be satisfactory, the total period of probation will be extended as considered necessary by the Government.

Candidate's Signature

(b) Training:—All the probationers will be required to undergo training for a period of two years in accordance with the prescribed training syllabus for the particular service/post at such place and in such manner and pass such examinations during this period as the Government may determine from time to time.

Signed in my persence

Signature of the Chairman of the Board To befllled-in by the Medical Board NOTE: The Board should record their findings underone of the following three categories in respect of chest X-Ray test of the candidate.

Name of the Candidate

CO Fit

(ii) Unfit on account of

(iii) Temporarily unfit on account of

Place;

Date:

(c) Termination of appointment:—The appointment of probationers can be terminated by three months notice in writing on either side during the period of probation. Such notice is not, however required in case of dismissal or removal as disciplinary measure after compliance with the provisions of clause (2) of Article 311 of the Constitution and compulsory retirement due to mental or physical incapacity. The Government however, reserve the right to terminate the services forthwith;

(i) If in the opinion of the Government the work or conduct of probationer is unsatisfactory or shows that he is unlikely to become efficient. Government may discharge him forthwith.

(ii) Failure to pass the departmental examination may result in termination of services, Failure to pass the examination in Hindi of an approved standard within the period of probation shall be liable to termination of services.

Signature

Chairman

Member

Member (d) Confirmation:—On the satisfactory completion of the period of probation and on passing all the prescribed departmental and Hindi examinations, the probationers will be confirmed in the Junior Scale of the Service if they are considered fit for appointment in all respect.

(e) Scales of pay :—

Seal of Medical Board

(i) Junior Scale—Rs. 8000-275-13500/-. (ii) Senior Scale—Rs. 10000-325-15200/-,

(iii) Junior Administrative Grade II—Rs, 12000-375-

APPENDIX in

BRIEF-PARTICULARS RELATING TO THE SERVICES/POSTS TO WHICH RECRUITMENT IS BEING MADE ON THE RESULTS OF THIS EXAMINATION.

207 GI/2001—B

16500/-.

(iv) Senior Administrative Grade II—Rs. 18400-500- 22400/-.

In addition there arc supertime scale posts carrying58 THE GA2ETTE0FINDIA: EXTRAORDINARY [PART I—SEC. 1] pay between Rs. 18400/- and Rs. 26000/- to which the officers of the above Services are eligible.

A probationer will start on the minimum of Junior Scale and will be permitted to count the period spent in probation towards leave, pension and increments in time scale.

Dearness and other allowances will be admissible in accordance with the orders issued by the Government of India from time to time.

Failure to pass the departmental and other examination during the period of probation may result in stoppage or postponment of increment.

(f) Refund of the cost of training.—If for any reasons which in the opinion of the Government; arc not beyond the control of the probationer a probationer wishes to withdraw from training or probation he shall be liable to refund the whole cost of his training and any other money paid to him during the period of his probation. For this purpose probationers will be required to furnish a Bond a copy of which will be enclosed alongwith their offers of appointment. The probationers permitted to apply for exmination for appointment to Indian Administrative service. Indian Foreign Service etc. will not however, be required to refund the cost of the training

(g) Leave—Officers of the Service will be eligible for leave in accordance with the Leave Rules in force from time to time.

(h) Medical Attendance:— Officers'will be eligible for medical attendance and treatment in accordance with the Rules in force from time to time.

(i) Passanger Privilege Ticket Orders:— Officers will be eligible for railway passes and Privilagc Ticket Orders in accordance with the Rules in force from time to time.

(j) Provident Fund and Pensions:-Candidates recruited to the Service will be governed by the Railway Pension Rules and shall subscribe to the State Railway Provident Fund (Non-contributory) under the rules of that Fund as in force from time to time.

(k) Candidates recruited to the Services/Posts are liable to serve in any Railway or Project in or out of India.

(I) Liability to serve in Defence Service:—The probationer appointed shall, if so required, be liable to serve i n any Defence Service or post connected with the Defence of India for a period of not less than four years including the period spent on training if any:—

Provided thai such person:—

(a) shall not be required to serve as aforesaid after the expiry often years from the date of appointment;

(b) shall not ordinarily be required to serve as aforesaid after attaining the age of forty years, 2. CENTRALENGINEERING SERVICE GROUP"A" AND CENTRAL ELECTRICAL AND MECHANICAL ENGINEERING SERVICE GROUP"A"

(a) The selected candidates will be appointed on probation for two years. They would be required to pass the prescribed departmental examination during the period of probation. On satisfactory completion of their probation they could be considered for confirmation or continuance in their appointment, Government may extend the period of probation of two years.

If on the expiration of the period of probation or of any extension thereof, Government are of opinion that the officer is not fit for permanent employment/retention or if at any time during such period of probation or extension, they are satisfied that the officer will not be fit for permanent appointmeni/retention on the expiration of such period or extension they may discharge the officer or pass such order as they think fit

(b) As things stand at present, all officers appointed ii Central Engineering Service Group 'A' are eligible for promotion to the next higher grade viz.. Executive engineer after competion of five years service in the graded of Assistant Executive Engineer subject to availability of vacancies and on condition that they are otherwise found fit for such promotion.

(c) Any perosn appointed on the results of this competitive examination shall, if, so required be liable to serve in any Defence Service or post connected with the Defence of India for a periosd of not less than four years including the period spent on training, if any.

Provided that such person :—

(i) shall not be required to serve as aforesaid after the expiry often years from the date of appointment

(ii) shall not ordinarily be required to serve as aforesaid after a training the age of forty years; (d) The following are the rates of pay admissible:—

(i) I.T.S. (A.E.E.) Rs. 8000-275-13500/-, (h) S.T.S. (E.E.) Rs. 10000-325-15200/-, (iji) Junior Administrative Grade (S.E.);

(a) Ordinary Grade Rs, 12000-375-16500/-.

(b) Selection Grade Rs. 14300-400-18300/-.

(iv) JuniorAdniinistrative Grade (C.E,)—Rs. 18400- 500-22400/-.

(v) Super time scales.

Additional D.G.—Rs. 22400-525-24500/-.

D. G. (W)—Rs. 26000/-fixed.

These posts are common to all the three disciplines i.e. Civil, Electrical and Mechanical and architectural.

NOTE—The pay of a Government servant who held a permanent post other than a tenure post in a substantive capacity prior to his appointment as probationer will be regulated subject to the provision of F.R. 22-B(I).

(e) Nature of duties and responsibilities attached to the posts in Central Engineering Service (Group A) and Central Electrical & Mechanical Engineering Service (Group A).

(i) Central Engineering Service Group A.

Candidates recruited to this Service through Engineering Services Examination are employed in the Central Public Works Department on Planning, Designing, Construction and Maintenance of various civil works (of Central Government) comprising residential buildings, office buildings, institutional and research centres, industrial buildings, hospitals and development schemes, aerodromes, highway and bridges etc. The candidates start their service in the Department as Assistant Executive Engineers (Civil) and in the course of their service are promoted to various senior ranks in the Department. (ii) Central Electrical and Mechanical/Engineering Service Group A.

Candidates recruited to this Service through Engineering Services Examination are employed in the Central Public Works Department on Planning. Designing, Construction and Maintenance of electrical components of various civil works (of Central Government) comprising of electrical installations, electrical substations and power houses, air-conditioning and refrigeration, runway lighting of aerodromes, operation cf mechanical workshops, procurement and upkeep of construction machinery etc. The candidates start their service in the Department as Assistant Executive Engineers (Electrical) and in the course ofthcir service are promoted to various senior ranks in the Department.

Probationers will be required to pass the MES Procedure Supdts. (B/R/E/M) Grade I Examination and Hindi Test during their probationary period of two years. The standard for Hindi Test should be "PRAGYA" (equivalent to Matriculation standard).

(b) The selected candidates shall if so required be liable to serve as commissioned officers in the Armed Forces for, period of not less than 4 years including the period spent on training if any.

Provided that such a candidate;—

(i) shall not be required to serve as aforesaid after the expiry of ten years from the date of appointment;

(ii) shall not ordinarily be required to serve as aforesaid after attaining the age of forty years;

(iii) The candidates shall also be subject lo Civilian in Defence Service (Field Liability) Rules, 1957 published under SRO No. 92, dated 9th March 1957. They will be medically examined in accordance with the medica! standard laid down therein.

(c) the following are the rates of pay :—

(a) Assistant Executive Engineer/Assistant Surveyor of Works—Rs. 8000-275-13500/-.

(b) Executive Engineer/Surveyor of Works—Rs. 10000-325-15200/-.

(c) Superintending Engineer/Superintending Surveyor of Works—Rs. 14300-400-18300/-.

(d) Additional Chief Engineer—Rs. 16400-450- 20000/- plus Special pay.

(e) Chief Engineer/Chief Surveyor of Works—Rs. 18400-500-22400/-.

(0 Additional Director General (Works)—Rs. 224OO-525-24500V

3. MILITARY ENGINEER SERVICE GROUP A.

The selected candidates will be appointed on probation for a poriod of two years. A probationer during his probationary period may be required to pass such departmental and language tests as Government may prescribe. If in the opinion of Government the work or conduct of an officer on probation is unsatisfactory or shows that he is unlikely to become efficient or if the probationer fails to pass the prescribed tests during the period Government may discharge him, On the conclusion of the period of probation, Government may confirm the officer in his appointment or if his work or conduct has in the opinion of Government been unsatisfactory. Government may either discharge him or extend the period of probation for such further periods as Government may consider fit.

4. INDIAN ORDNANCE FACTORY SERVICE GROUP-A (a) Selected candidates will be appointed on probation for a period of 2 years. The period of probation may be reduced or extended by the Government on the recommendation of Director General, Ordnance Factories &, Chairman, O.F. Board. Probationer will undergo such practical training, as shall be provided by the Government and are required to pass such departmental and language tests as Government may prescribe. The language test will be a test in Hindi.

On the conclusion of the period of his probation Government will confirm the officer in his appointment. If, however, during or at the end of the period of probation his work or conduct has in the opinion of Government been60 THEGAZETTEOFINDIAiEXTRAORDINARY [PART I—SFJC. 1] unsatisfactory. Government may either (discharge him or extend his period of probation for such period as Government may think fit.

(b) (i) Selected candidates shall if, so required be liable to serve as Commissioned officers in the Armed Forces for a period of not less than four years including the period spent on training if any provided that such persons (i) shall not be required to serve as aforesaid after the expiry often years from the date of appointment and (ii) shall not ordinarily be required to serve as aforesaid after attaining the age of forty years.

(ii) The candidate shall be subject to Civilian in Defence Service (Field Liability) Rules. 1957, published under SRO No. 92 dated 9th March, 1957. They will be medically examined in accordance with the medical standard laid down therein.

(c) The following are Scales of Pay admissible:-

Jr. Time Scale—Rs. 8000-275-13500/-..

Sr. Time Scale—Rs. 10000-325-15200'-.

Jr. Admin. Grade (OG>Rs. 12000-375-16500/-.

Jr, Admin. Grade (SG)-Rs. 143(XMOO-18300A.

Sr. Admin. Gr—Rs. 184O0-5O0-224O0/-.

Sr. General Manager—Rs. 22400-525-24500/-.

Addl. DGOF/MemberOFB—Rs, 24050-650-26000/-.

DGOF/ChairmanOFB—26000 (fixed).

Government are of the opinion that a candidate is notfitfor permanent appointment or if any time during such period of probation or extension they are satisfied that he will not be fit for permanent appointment, they may discharge or revert him to his substantive post or pass such order as they think fit.

During the period of probation the candidates may be requited by the Government to undergo such courses of training and instruction and to pass such examination and tests as it may think fit as a condition to satisfactory completion of probation.

(ii) Any person appointed on the result of this competitive examination shall, if so required, be liable to serve in any Defence Service or post connected with the Defence of India, for a period of not less than four years including the period spent on training, if any.

Provided that such person;—

(a) shall not be required to serve as aforesaid af- ter the expiry of ten years from the date of appointment;

(b) shall not ordinarily be required to serve as aforesaid after attaining the age of forty years.

(Hi) The officers appointed to the post of Assistant

Director Assistant Executive Engineer can look forward

for promotion to higher grade of Deputy Director/

Executive Engineer/Superintending Engineer/Director

(Ordinary Grade)/Director/Superintendlng Engineer

(Selection Grade) Chief Engineer/Member/Chairman,

CWC after fulfilling the prescribed conditions.

NOTE-The pay of Government servant who held a permanent post, other than a tenure post in substantive capacity prior to his appointment as a probationer will be regulated subject to the provisions of Ministry of Defence O.M. No. 15 (6) /64/D (Appts.) 105 D (Civ. 1) dated the 25th November, 1965 as amended from time to time.

(d) Probationers are required to undergo Foundational Training course at Ordnance Factories Staff College Ambajhare, Nagpur.

(c) A probationer so recruited shall have to execute a bond before joining the service.

5. CENTRAL WATER ENGINEERING (GROUP A) SERVICE

(i) Persons recruited to the post of Assistant Director/ Assistant Executive Engineer in the Central Water Engineering (Group 'A' Service) shall be on probation for a period of two years.

Provided that the Government may, where necessary extend the said period of two years for a further period not exceeding one year.

If on the expiration of the period of probation referred: to above or any extension thereof as the case may be, the (iv) The scales*of pay for Group 'A' Engineering post in Central Water Engineering (Group LA' Service) are as follows;-

(Civil and Mechanical Posts in the Central Water Engineering Group 'A' Service)

1 Assistant Director/

Rs. 8000-275-13500 Assistant Executive Engineer

Rs. 10000-375-15200.

2 Deputy Director/

Executive Engineer

*3. Superintending Engineer/ Rs. 12000-375-16500 Director (Ordinary Grade)

*4. Director/Superintending Rs. 14300-400-18300 Engineer Selection

5 Chief Engineer

Rs. 18400-500-22400 6 Member CWC

Rs. 22400-525-24500 Chairman GFCC

7 Chairman CWC

Rs. 26000 (Fixed) *The Scale of Pay and Recruitment Rules are under revision,61 (v) Nature of duties and responsibilities attached to the posts of Central Water Engineering (Group A) Service:— (a) At Headquarters

the Power Schemes (Generation, Transmission, Distribution and Utilisation of Power Supply) in the country arc scrutinised in the Central Electricity Authority in respect of feasibility, technical analysis, economic, viability, etc. to ensure that the schemes would fit into the overall development of the States as well as the Region and will conform to the overall context of National Economy. The organisation occupies pivotal position in the development of national economy for providing power; its main driving force.

(ii) Description of the grade to which the

recruitment is made through the Engineering Sendees

Examination held hy Union Public Service Commission.

Central Water Commission (CWC) is primarily responsible for almost all aspects of Water Resources Development. Officers in the headquarters are directly associated with planning, design, appraisal and monitoring of different water resources projects in the country. CWC through its various specialised Directorates fulfil its obligation towards these aspects. The officers at various levels in Design Units are associated with detailed studies in respect of design of various components of the Water resources projects under different stages of implementation. There are specialised Directorates on Hydro-civil Design, Concrete & Masonry Dam design. Earth & Rockfill Dam I Design, Barrage and Canal Design arid design of Gates on Hydraulic Structures. The activities relating to Water resources assessment, design flood estimation and sediment analysis are carried out through Hydrological Studies Organisation of CWC. CWC has specialised units for Project Appraisal, Project Monitoring and Environmental Management. The Central Mechanical Organisation of CWC is associated with Construction Equipment Planning and Contract Management of almost all the major Water Resources development projects. The activities of CWC at its headquarters also include development of flood forecasting models through its P&D Organisation and the planning & design of various flood management practices through its Flood Management Organisation.

Fifty per cent of vacancies in the grade of Assistant Director (Grade-I)/Assistant Executive Engineer in the scale of Rs. 8.000-13,500/- are filled by direct recruitment on the results of the Engineering Services Examination held by the Union Public Service Commission annually.

Persons appointed to the posts of Assistant Director (Grade-J)/Assistant Executive Engineer of the Central Power Engineering (Group A) shall be on probation for a period of two years provided that the Government may, where necessary, extend the said period of two years for a further period not exceeding one year,

(b) At field formation of CWC

The field organisations of CWC are directly involved with hydrological observation, project investigation, project appraisal of medium irrigation projects, monitoring of identified projects and flood forecasting on almost all the rivers in the States. These activities are-carried out through a net-work of regional offices headed by the Chief Engineer and Circles/Directorates headed by Superintending Engineer/ Director and Divisions headed by Executive Engineers. There are sub-Divisions/Conirol Rooms headed by Assistant Executive Engineers which are directly involved with investigation of water resources development projects, hydrological observation and flood forecasting.

If on the expiration of the period of probation referred, to above cr any extension thereof, as the case may be, the Government are of the opinion that a candidate is not fit for permanent appointment or if at any time during such period of probation or extension, they are satisfied that he will not be fit for permanent appointment on the expiration of such period of probation or extension, they may discharge or revert him to his substantive post or pass such order as they think fit.

During the period of probation, the candidate may be required by the Government to undergo such courses of training and instruction and to pass such examination and tests as it may think fit as a condition to satisfactory completion of probation,

Any person appointed on the result of this competitive examination shall if so required, be liable to serve in any Defence Service or post connected with Defence of India for a period of not less than four years including the period spent on training, if any, prov ided that such persons—

6. CENTRAL POWER ENGINEERING (GROUP A)

SERVICE

(i) Description of the Organisation

(a) shall not be required to serve as aforesaid after the expiry of ten years from the date of appointment;

(b) shall not ordinarily be required to serve as aforesaid after attaining the age forty years.

(Hi) Promotion to higher grades

The Central Electricity Authority was constituted under Section 3(1) of the Electricity (Supply) Act, 1948, and is vested with the responsibility to develop a sound adequate and uniform National Power Policy to co-ordinate the activities of the Planning agencies in relation to the control and utilization of the National Power resources. All The officers appointed to the post of Assistant Director (Grade-I) /Assistant Executive Engineer are eligible62 THEGAZETTEOFINDIAiEXTOAORDINARY IPARTI—SEC, 1] confirmation according to rules subject to the availability of substantive vacancies.

The persons appointed to the posts of Drilling for promotion to higher grade viz. Deputy Director/ Executive Engineer/Dircctor/Superintending Engineer (Ordinary Grade. )/Dircctor/Supcrintending Engineer (Selection Grade) and Chief Engineer subject to availability of vacancies in the grade concerned, after fulfilling the conditions laid down in the Central Power Engineering (Group A) Service Rules, 1965 as amended from time to time. (iv) Scale of pay

Engineer (Junior) and Mechanical Engineer (Junior) in the Geological Survey of India, shall, if so required, be liable to serve in any Defence Service or post connected with the Defence of India for a period of not less than four years including the period of training, if any.

Provided that such a person :—

(I) Shall not be required to serve as aforesaid after The scale of pay for the posts of Central Power Engineering (Group A) Services in the Central Electricity Authority arc as follows :—

Electrical, Mechanical and Tele-communication post

in the Central Electricity Authority:—

the expiry of ten years from the date of appointment as Drilling Engineer (Junior) or Mechanical Engineer (Junior) Geological Survey of India, and

Pay Scale

Name of the Post

SI. No.

(ii) Shall not ordinarily be required to serve as aforesaid after attaining the age of forty years.

Rs. 8000-275-13500

1. Assistant Director (Gradc-I) Assistant Ex-Engineer

Dy, Director/Ex-Engincer Rs. 10000-325-15200

2.

The following is the field of promotion open to those found fit according to the rules and instructions on the subject.

Rs. 12OOO-375-165OO

3.

A. For Drilling Engineer (Junior) Group lA'-Rs. 8,000- Non Functional Junior Administrative Grade

275-13,500.

Rs. 14300-400-18300

4. Dire^or/Supd. Engineer

0) Drilling Engineer (Senior)-Rs. 10,000-325-

Rs. 18400-500-22400

5.

15,200.

Chief Engineer/Member Secretary.

(ii) Director (Drilling)-Rs. 12,000-375-16,500.

(v) Duties and Responsibilities

(iii) Dy. Director General (ES)-Rs. 18,400-500-22,400

(iv) Sr. Dy. Director General-Rs. 22,400-600-26,000.

Nature of duties and responsibilities attached to the posts of Assistant Director (Grade-I)/Assistant Executive Engineer are:—

B. For Mechanical Engineer (Junior) Group 'A'—

Rs. 8,000-275-13,500,

(i) Mechanical Engineer (Senior)-Rs, 10,000-325-

15,200.

(ii) Director (Mechanical Engineering—

Rs. 12,000-375-16,500.

(iii) Deputy Director General (Engineering

Services)-Rs. 18,400-500-22,400.

{iv) Sr. Deputy Director General- Rs. 22,400-600-

26,000.

Collection, compilation and co-relation of technical data required for dealing with various types of problems in the fields of power development. He is also required to deal with cases and handle matters in relation thereto including erection; operation, maintenance of Hydro and Thermal Power Projects as well as Transmission and Distribution Power Systems, studying projects reports * providing assistance in preparation of power plans, designs or projects etc, While working in field Units, he is responsible for the Sub-Division or other works allotted to him 7.POSTS INTHEGEOLOGICALSURVEYOFINDIA

The officers recruited in Geological Survey of India will be required to serve anywhere in India or outside the country.

NOTE:-The pay of a Government servant who held a permanent post other than a tenure post in a substantive capacity prior to his appointment as probationer will be regulated subject to the provisions of F. R. 22 B(I).

Nature of duties & responsibilities attached to the

posts in Geological Survey of India.

The nature of duties and responsibilities of Persons recruited to the posts of Drilling Engineer (Junior) and Mechanical Engineer (Junior) (Group A posts) in the Geological Survey of India in a temporary capacity will be on probation for a period of two years. Retention in service for a further period over two years will depend on assessment of their work during the period of probation. This period may be extended at the discretion of the Government. They will receive pay in time scale of Rs. 8,000-275-13,500. On completion of their period of probation satisfactorily, if they are considered fit for permanent appointment they will be considered for Mechanical Engineer (Jr.) in GSI will be (a)fleetmanagement63 having a strength of approx. 300 vehicles, the deployment of vehicles in field areas with all the connected works concerning Road Transport Authority and upkeep of documents of vehicles fitness etc, (b) Responsibility of the maintenance of vehicles/ drill machine equipments and other Mechanical machine tools for their best performance/ preventive and major repairs, (c) Management of manufacturing works of drillirng accessories, laboratory equipments, design and fabrication modifications of special scientific equipments etc. and to take care of a machine shop having general purpose machine tools, (d) Personal management of technicians, supervisors of different trades in the Engineering Stream, (e) Updating of records of equipments/vehicles/machinerics and managing the establishment, (f) finalising technical specification for procurement of vehicle equipments and also the responsibilities of disposal of equipment, (g) Spare parts/ inventory management involving, indents, procurement including procurement of stock maintenance.

Drilling Engineer (Junior): Carrying out drilling operation in connection with mineral exploration with one or more drilling rigs, ensuring optimum percentage of ore, recovery upkeeping of machinery and vehicles deployed in good order, security of Govt stores and accounts and looking after the welfare of staff employed under him. 8, ENGINEERS (GROUP 'A' IN THE WIRELESS PLANNING AND COORDINATION WING/ MONITORING ORGANISATION, MINISTRY OF COMMUNICATION DEPARTMENT OF TELECOMMUNICATIONS).

(a) ScalcofpayRs. 8000-275-13,500/-.

(b) The incumbent of the post of Engineer is eligible for promotion against 100% of the vacancies in the grade of Assistant Wireless Adviser. Wireless Planning and Coordination Wing/Enginccr-in-Charge, Monitoring Organisation (Scale of pay Rs. 10,000-325-15,200/- plus Rs. 400/- per month as special pay for the post of Assistant Wireless Adviser) after putting in five years service in the grade. Promotion to the grade of Assistant Wireless Adviser/ Engineer-in-Chargc will be on the basis of their selection on the recommendations of the Departmental Promotion Committee as constituted for Group 'A' posts.

All Assistant Wireless Advisers and Engineeis-in- Charge with 5 years' service in the Grade of Assistant Wireless Adviscr/Engineer-in-Charge are eligible for being considered for promotion as Deputy Wireless Adviser/ Deputy Director (Scale Rs. 12,000-375-16,500/-). The vacancies in the grade of Deputy Wireless Adviser/Deputy Director arc filled 100% by promotion on the basis of selection on the reommendations of the DPC as constituted for Group 'A' posts,

The vacancies in the next higher grades of Joint Wireless Adviser/Director (WM) in the pay scale of Rs.

18400-500-22400 and Wireless Adviser to the government of India in the pay scale of Rs. 18400-500-22400 are filled 100% by promotion on the basis of selection on the recommendations of DPC as constituted for Group 'A' posts.

The requirements for promotion to the next higher grade, as laid down above, arc those of minimum eligibility and that promotion in the grade concerned will take place subject to availability of vacancies only.

(c) The person appointed to the post of Engineer is

liable to be posted anywhere in India

(d) Any person appointed to the post of Engineer shall if so required be liable to serve in any Defence Service or post connected with the Defence of India for a period of not less than 4 years including the period spent on training if any.

Provided that such a person :—

(i) Shal I not tie required to serve as aforesaid after the expiry of ten years from the date of appointment;

(ii) Shall not ordinarily be required to serve as aforesaid after attaining the age of forty years.

(c) Nature of Duties and Responsibilities Attached

to the Post.

(i) Supervision, guidance and training of staff in the different units of the WPC Wing/Wireless Monitoring Organisation.

(ii) Installation, calibration, testing and maintenance of various categories of electronic equipment, antenne and ancillaries employed in radio frequency monitoring covering the entire radio frequency spectrum and various types of commissions.

(iii) Licensing and inspection of wireless installations of the various user Departments/ Organisations for different types of the radio communication service.

(iv) All aspects relating to -National and International Coordination for the use of radio freqency spectrum and geostationary satellite orbit including preparation of allocation plants, catablishment of relevant technical standards, type-approved of equipment, studies of electromagnetic interference compatibility etc. (v) Administration of Internal Radio Regulations including formulation and implementation of corresponding national rules and regulations.

(vi) Conducting of examination for Certificate of Proficiency/Radio Armaturcs-etc. and issuing of respective Licenses.

(vii) Research and development work Iciev ant to radio frequency management and monitoring.

Services, Group 'AVGroup 'B' will be regulated subject to the provision of F. R. 22-B(l).

(d) Nature of duties and responsibilities attached to the post in Central Engineering Service (Roads) Group 'A'.

(i) Civil Engineering Posts:-

(viii) National level preparation for the conference and meeting of International Telecommunication Union, and as appropriate, or other International/Regional Organisations dealing with telecommunications.

9. CENTRAL ENGINEERING SERVICE (ROADS). GROUP'A'

To assist the Senior Technical Officers at Hqrs. and in the Regional Offices etc. of the Roads Wing, Ministry of Surface Transport in planning, preparing designs and estimates of roads/bridges work and scrutiny of proposals for such work received from the states,

(ii) Mechanical Engineering Posts :-

(a) The selected candidates will be appointed as Assistant Executive Engineer on probation for two years. On the completion of the period of probation, if they are considered fit for permanent appointments, they will be confirmed as Assistant Executive Engineer if permanent vacancies are available. The Government may extend the period of probation of two years.

To assist the Senior Technical officers at Hqrs. and in the Regional Offices etc. of the Roads Wing, Ministry of Surface Transport in planning, procurement, operation and maintenance of roads/bridges construction equipments, to prepare estimates for repairs and maintenance of such equipments and scrutiny of proposals and estimates received from the states,

10. INDIAN NAVAL ARMAMENT SERVICE

If on the expiration of the period of probation or of any extension thereof. Government arc of the opinion that an Assistant Executive Engineer is not fit for permanent employment or if at any time during such period of probation or extension they ate satisfied that an Assistant Executive Engineer will not be fit for permanent appointment on the expiration of such periods of extension, they may discharge the Assistant Executive Engineer or pass such orders as they think fit.

(a) Candidate selected for appointment to the service will be appointed as probationers for a period of two years which period may be extended at the discretion of competent authority. Failure to complete the probation to the satisfaction of the competent authority will render them liable to discharge from service.

(b) Any person appointed on the results of this compctiliuve examination shall if so required, be liable to serve in any Defence Service or post connected with the Defence of India for a period of not less than four years including the period spent on training, if any.

Provided that such person—

(i) shall not be required to serve as aforesaid after the expiry of ten years from the date of appointment.

(ii) shall not ordinarily be required to serve as aforesaid after attaining the age of forty years.

(c) The following arc the scale of pay admissible :

(b) The appointment can be terminated at any time by giving the required period of notice (one month in the case of temporary appointment and three months in the case of permanent appointment by competent authority). The Government, hovVcver, reserves the right of terminating services of the appointees forthwith or before the expiry of the stipulated period of notice by making payment of a sum equivalent to pay and allowances for the period of notice or the unexpired portion thereof.

Assistant Executive Engineer-^s. 8000-275-13500/-.

Executive Engineer-Rs. 10,000-325-15200/-.

Superintending Engineer-Rs, 12000-375-16500/-.

SupcrintendingEnginoer (Selection Grade)—Rs. 14300-

400-18300/-.

Chief Enginecr-Rs. 184OO-5OO-2240O/-,

(c) They will be subject to terms and conditions of the Service as applicable to Civilian Government Servants paid from the Defence Services Estimates in accordance with the orders issued by the Government of India from time to time they will be subjected to Field Service Liability Rules, 1957 as amended from time to time.

Additional Director General-Rs. 22400-525-24500/-.

(d) They will liable for transfer anywhere in India, Director General (Roads Development) and

or abroad.

Additional Secrctary-Rs. 22400-600-26000/-.

(e) Scale of pay and classification-Group A

Gazetted.

(i) Deputy Armament Supply Officer, Note:The pay of Government servant who held a permanent post other than a tenure post in substantive capacity prior to his appointment as a probation in the Central Engineering

Grade-II-Rs. 8000-275-13500.'65 (ii) Deputy Armament Supply Officer.

Grade-I-Rs. 10000-325-15200.

(iii) Naval Armament Supply Officer (Ordinary Grade)-Rs. 12000-37546500 (iv) Naval Armament Supply Officer (Selection Gradc)-Rs. 14300^00-18300.

(v) Senior Administrative Grade-Rs. 18400- 500-22400.

(vi) Director General of Armament Supply- Rs. 22400-525-24500.

(f) Prospects of promotion to higher grades: - (i) Deputy Armament Supply Officer, Grade I DASOs Grade-II with 4 years service are eligible for promotion to the grade of DASO Grade I in the scale of pay or Rs. 10000-325-15200/- on the basis of selection on the recommendations DPC provided that only those officers wiil be considered for promotion who have passed the departmental examination which may be held after technical training course or the Naval Technical Staff Officers Couiscatthe I.A.X, Kirkcc.

Naval Armament Supply OfTicer-(Ordinary Grade), (ii) Deputy Armament Supply Officer, Grade I with 5 years service as such are eligible for promotion to the grade of Naval Armament Supply Officer (Ordinary Grade) in the pay scale of Rs, 12000- 16500 on the basis of selection to be made by the appropriate DPC.

(iii) Naval Armament Supply Officer (Selection Grade).

Naval Armament Supply Officer, (Ordinary Grade) with 4 years service as such arc eligible for promotion to the grade or Naval Armament Supply Officer, (Selection Grade) in the pay scale of Rs. 14300-18300 on the basis of selection to be made by the appropriate DPC.

"(iv) Senior Administrative Grade-Naval Armament Supply Officer (Selection Grade) with 3 years service in the gradc(s) are eligible for promotion to the grade of Senior Administrative Grade in the pay scale of Rs. 18400-22400 on the basis of selection to be made by the appropriate DPCs."

(v) Director of Armament Supply.

Naval Armament Supply Officer (Selection Grade) with 3 years service in the grade

to the grade of Director General of Armament Supply in the pay scale of Rs. 18400-22400 on the basis of selection to be made by the appropriate DPC.

The requirements for promotion to next higher grade as laid down above, are those of minimum eligibility and that promotion in the grade concerned will take place subject to availability of vacancies only.

NOTE -.The pay of the Government servant who held a permanent post other than tenure post in a substantive capacity immediately prior to his appointment as a probationer may be regulated subject to the provision of F. R. 22B(f) and the Corresponding article in CSR applicable to probationer in the Indian Navy.

(g) Nature of duties and responsibilities attached to the post of Deputy Armament Supply Officer Grade II in the Indian Navy, Ministry of Defence.

(i) Production, planning and direction of work relating to repair, modification and maintenance of armaments, incorporating various mechanical, electronics and electrical devices and system production and productivity.

(ii) Provision of machinery, electronic and electrical equipment for repair, maintenance and overhaul.

(iii) Development work to establish import substitutes, preparation of indigenous design specifications.

(iv) Providing of mechanical, electronics and electrical spares for armaments.

(v) Periodical caliberation testing/ examination of sub-assemblies and assemblies of mechanical, electronics and electrical items of armaments (missiles, torpedos, mines and guns) measuring instruments etc.

(vi) Providing logistic support in respect of armament stores to Fleet and Naval Establishments.

(vii) Rendering of technical advise to the service in all matters relating to mechanical, electronic and electrical engineering in respect of armaments.

11. POSTS OF ASSISTANT EXECUTIVE

ENGINEER/ ASSISTANT ENGINEER IN THE CORPS OF EME, MINISTRY OFDEFENCE :—

(i) Candidates recruited to these posts through ESE are employed in lieu of Army Officers of the rank of Captain/Lieutenant. They will be66 THE GAZETTE OF INDIA: EXTRAORDINARY [PART 1—SEC 1 ] Assistant Executive/Assistant Engineer are as under:—

appointed on probation for a period of two years. On satisfactory completion of the probation, they would be considered for continuance in their appointment. Govt may either extend the period of probation of two years or discharge them from service, if their work or conduct, in the opinion of the Govt., has been unsatisfactory.

(aa) Candidates recruited in the Corps of Electrical and Mechanical Engineers through ESE are employed in production, planning & control and administration in various Army Base/ Station workshops.

(ii) Officers appointed shall be liable to serve

anywhere in India and abroad,

(iii) Officers appointed shall be liable to undergo courses' of instruction in India or abroad as the Govt. may decide from time to time.

(ab) They are responsible for achieving the given production targets such as manufacturing of spares, overhaul/repair of Army equipment, technical efficiency of sections under their control, preventive maintenance of plants and machineries, inventory management etc. (iv) Officers appointed shall, if so required, be liable to serve as commissioned officers in the Armed Forces for a period of not less than four years including the period spent on training, if any provided that such persons :-

(ac) Suitably qualified officers are posted as instructional staff in EME training establishments located at Sccunderabad, Baroda and Bhopal to train all ranks attending various courses on repair and maintenance of Army equipments.

(aa) shall not be required to serve as aforesaid after the expiry often years from the date of appointment.

12. BORDER ROADS ENGINEERING SERVICE (ab) shall not ordinarily be required to serve

GROUP—A¹

as aforesaid after attaining the age of forty years,

(v) The candidates will be subjected to civilians in Defence Services (field liability) Rules, 1957 published under SRO No, 92 dated 9 Mar, 57. They will be medically examined in accordance with the medical standards laid down therein.

(i) The selected candidates will be appointed as Assistant Executive Engineers on probation for a period of two years. The probationer during the probation period may be required to pass such departmental tests as Government may prescribe. At any time during the period of probation or on conclusion thereof, if his work and conduct has in the opinion of the Government, been unsatisfactory Government may either discharge him or extend the period of probation for such further period as Government may consider fit.

(vi) The candidates start their service in the department as Assistant Executive Engineer or Assistant Engineer as the case may be and in the course of their service are promoted to various senior grades in the Department subject to availability of vacancies and fulfilling the prescribed conditions. On line promotions and the scales of pay are as under:—

(aa) Assistant Engineer Group lB' post Rs.

Rs. (6500-200-10500)

(ii) The selected candidates shall be liable to serve in any part of India, or outside including the field area in war and in peace. They will be medically examined in accordance with the medical standards laid down for the field service,

(ab) Assistant Executive Engineer Rs. (8000-

(iii) The following are scales of pay admissible to 275-13500)

them:—

(ac) Executive Engineer Rs. (10000-325-

(a)AEE (Civil) Rs.8000-275-13500 15200)

Executive'Engineer (Civil) Rs. 1OOOO-325-15200 (ad) Superintending Engineer Rs. (12000-375-

SupcrintendingEngineer(Civil) Rs. 12000-375-16500 16500) Group-'A'post

(ae) Additional Chief Engineer Rs. (14300-

400-18300)

Superintending Engineer (Civil) Rs. 14300-400-18300 Engineer (Civil) (Selection Grade)

(af) Chief Engineer Rs. (16400-450-20000)

Chief Engineer (Civil) Rs. 18400-500-22400 Addl.DGBR Rs. 22400-525-24500 (vii) Duties and Responsibilities: Nature of responsibilities attached to the posts of67 (b)AEE(E&M) Rs. 8000-275-13500 Exeailive Engineer (E&M) Rs. 1OOOO-325-] 5200 Superintending Engineer Rs. 12000-375-16500 (HAM)

Superintending Engineer Rs. 14300400-18300 (E&M) (Selection Grade)

Chief Engineer (E&M) Rs. 18400-500-22400 (iv) The officers appointed to the post of Assistant Executive Engineer can look forward to promotion to the higher grades of Executive Engineer, Superintending Engineer, Chief Engineer after fulfilling the prescribed conditions.

The requirements for promotion to next higher grade, as laid down above are those of minimum eligibility and that promotion in the grade concerned will take place subject • to availability of vacancies only.

(v) The officers appointed to the service are entitled to Special Compensatory Allowance and Special Duty Allowance at prescribed rates when employed in certain specified areas and free ration or allowance in lieu of ration; besides other usual allowances such as HRA, CCA, etc. as admissible to the Central Government employees. They are also entitled to outfit allowance.

(vi) The Officers appointed to the Border Roads Engineering Service Group' A' post would also be subject to Army Act 1950 for the purpose of discipline,

(vii) Ladies are ineligible for appointment in Borders Roads, Engineering Service Group' A' in view- of the extention of the provisions of Section 12 of the Army Act to this Service.

13. SURVEY OF INDIA GROUP 'A' SERVICE

1. Appointments will be made on probation for a period of two years.

Provided that the Controlling Authority may extend the period of probation in accordance with the instructions issued by Government from time to time in this regard.

Provided further that any decision for extension of a probation period shall be taken ordinarily within eight weeks after the expiry of the previous probationary period and communicated in writing to the concerned officer together with the reasons for so doing within the said period,

On completion of the period of probation or any extension thereof, as the case may be, if the Government is of the opinion that an officer is not fit for permanent appointment, for reasons to be recorded in writing, may discharge or revert the officer to the post hold by him prior to his appointment in the service, as the case may be.

During the period of probation, or any extension thereof, candidates may be required by Government to undergo such courses of training and instructions and to pass examinations and tests (including examination in Hindi) as Government may deen fit, as a condition to satisfactory completion of the probation.

2. Officers appointed shall be liable to serve anywhere in India and abroad.

3. Officers appointed shall be liable to undergo such training and be detailed on courses ofinslruclion in India or abroad as the Government may decide from time to time.

4. Any person appointed on the result of competitive examination shall if so required be liable to serve in any defence services or posts connected with defence ofTndia for a period not less than 4 years including the period spent on training, if any, provided that such persons shall not be required:—

(i) to serve as aforesaid after the expiry of 10 years from the date of appointment;

(ii) ordinarily to serve as aforesaid after attaining the age of 40 years.

5. The following are the scales of pay admissible:—

Junior Scale Rs. 8000-275-13500 Senior Scale Rs, 10000-325-15200 Junior Administrative Grade Rs. 12000-375-16500 Selection Grade

Junior Administrative Grade Rs. 14300-400-18300 Senior Administrative Grade Rs. 18400-500-22400 Surveyor General of India Rs. 22400-525-24500 6. Nature of duties and responsibilities attached to the various posts.

Deputy Superintending Surveyor—Required to carry out Survey work in the fields of geodesty, photogrammctry, cartography and digital mapping as an individual worker, as well as Section Officer/Camp Officer to supervise Sections/ Camps. He will also assist Officer-in-Charge (Superintending Surveyor) in both—technical & administrative work of the unit.

Superintending Surveyor—Responsible for the organisation and discipline of the Party, custody, maintenance and accurate accounting of stores, economical expenditure of funds at his disposal, proper training of all his Officers and men in their duties and in the method of Survey best suited to the work execution and supervision of all technical work—field verification, fair mapping, photogrammetry and digital mapping etc.

management, budgeting monitoring and control of entire expenditure of the Directorate.

Deputy Director—Assist the functional Director in smooth and efficient functioning of the Directorate, responsible for s c r u t i n i s i n g, completion and monitoring of all technical, administrative and financial reports and returns, for arranging trade tests, training circles DPCs, presiding over procurement boards, finalising of tender and contract and all other matter delegated by the Director.

Additional Surveyor General-Complete overall responsibility for the efficient performance of the Circles under his charge in respect of Technical, Scientific. Administrative, Human Resources Development, finance and accounts, finalising the training, field, fair-mapping, digital mapping and reprography programmes and printing work for all Circles under his charge, monitoring progress of technical work according to the prescribed norms and ensure requisite standard of accuracy at every stage, responsible for development/adoption of new technical methods of work, advice to State Governments on all surveying matters falling in his Zone.

Director/Deputy Director Selection Grade— Responsible for all surveys and mapping, appointing and disciplinary authority for all Group LC staff, technical coordinating guidance, supervision and monitoring of Surveying & Mapping operations including advice to State Govt. Central project Authorities etc. etc., financial

Printed by the Manager, Oovt. of India Press, Ring Road, Mayapuri, New Delhi-110064 and Publiihed by the Controller of Publications, Dolhi-110054.