REGD. NO. D. L.-33004/99 रजिस्ट्री सं॰ डी॰ एल॰-33004/99
असाधरण
EXTRAORDINARY
भाग II—खण्ड 3—उप-खण्ड (i)
PART II—Section 3—Sub-section (i)
प्राध्किार से प्रकाशित
PUBLISHED BY AUTHORITY
सं. 534] नई दिल्ली, मंगलवार, जून 27, 2017/आषाढ़ 6, 1939
No. 534] NEW DELHI, TUESDAY, JUNE 27, 2017/ASADHA 6, 1939
सड़क परिवहन और राजमार्ग मंत्रालय
अधिसूचना
नई दिल्ली, 27 जून, 2017
सा.का.नि. 643(अ).—के न्(cid:7076)ीय मोटर यान नियम, 1989 का और संशोधन करने के लिए कतिपय प्रारूप नियम मोटरयान अधिनियम, 1988 (1988 का 59) की धारा 212 की उपधारा (1) की अपेक्षानुसार भारत सरकार के सड़क परिवहन और राजमार्ग मंत्रालय की अधिसूचना संख्या सा.का.नि. 402(अ), तारीख 21 अप्रैल , 2017 के अधीन भारत के राजपत्र, असाधारण, भाग II, खंड 3, उपखंड (i), तारीख 21 अप्रैल, 2017 में प्रकाशित किये गए थे, जिसमें उन सभी (cid:7390)क्तियों से, जिनके उससे प्रभावित होने की सम्भावना थी, उस तारीख से, जिसको भारत के राजपत्र में प्रकाशित रूप में उक्त अधिसूचना की प्रतियां जनता को उपलब्ध करा दी गई थी, सात दिन की समाप्ति का पूर्व आक्षेप और सुझाव मांगे गए थे;
और उक्त अधिसूचना की प्रतियां जनता को 21 अप्रैल, 2017 को उपलब् ध करा दी गई थी ;
उक्त प्रारूप नियमों की बाबत जनता से प्राप्त आक्षेप और सुझाव जनता से प्राप्त नह(cid:7277) किये गए थे;
अत:, अब कें (cid:7076)ीय सरकार, मोटर यान अधिनियम, 1988 (1988 का 59) की धारा 110 द्वारा प्रदत्त शक्तियों का प्रयोग करते हुए के न्(cid:7076)ीय मोटर यान नियम, 1989 का और संशोधन करने के लिए निम्नलिखित नियम बनाती है, अर्थात् :-- 1. (1) इन नियमों का संक्षिप्त नाम कें (cid:7076)ीय मोटर यान (दसवां संशोधन) नियम, 2017 है ।
(2) ये राजपत्र में उनके प्रकाशन की तारीख को प्रवृत्त होंगे ।
2. कें (cid:7076)ीय मोटर यान नियम, 1989 में, नियम 118 में, उप-नियम (1) के पहले परंतुक के , खंड (iv) का लोप किया जाएगा।
1. (1) इन नियमो का संक्षिप्त नाम कें (cid:7076)ीय मोटर यान (दसवां संशोधन) नियम, 2017 है ।
(2) ये राजपत्र में इनके अंतिम प्रकाशन की तारीख को प्रवृत्त होंगे ।
3942 GI/2017
(1)2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)] 2. कें (cid:7076)ीय मोटर वाहन नियम 1989, में
(i) 115 (ख) तत्प(cid:7391)ात उप-नियम (1) के रूप में संख्यांकित किया जाएगा और इस प्रकार पुनः संख्यांकित के रूप में, उपनियम (1) के प(cid:7391)ात निम्नलिखित अंतः स्थापित किया जाएगा, अर्थात:-
"(2) जब (cid:7076)वित प्राकृ तिक गैस को ईंधन के रूप में उपयोग किया जायेगा तो उप नियम (1) के तहत सामूहिक उत्सर्जन मानक जो सीएनजी समर्पित वाहनों के मूल उपकरण पर लागू हैं, वो जीवीडब्ल्यू> 3.5 टी वाले मूल उपकरण निर्मित्त वाहन पर लागू होंगे।
(3). उत्सर्जन में लागू होने वाले (cid:7076)वीकृ त प्राकृ तिक गैस संरचना उन ईंधन विनिद(cid:7287)शों के अनुसार होना चाहिए, जैसा कि यथास्थिति पेट्रोलियम और प्राकृ तिक गैस मंत्रालय, भारत सरकार या भारतीय मानक ब्यूरो के द्वारा, समय-समय पर मोटर वाहन आवेदन के लिए विनिद(cid:7287)शों द्वारा अधिसूचित किया गया है;:
परन्तु ऐसे समय तक (cid:7076)वित प्राकृ तिक गैस ईंधन, उपाबंध 4 - एलए में अपेक्षाओं का पालन करते हुए, प्रकार के अनुमोदन और उत्पादन की अनुरूपता के प्रयोजन के लिए किया जाएगा।
4. मूल उपकरण जी.वी.डब्लू. वाले वाहन समर्पित विनिर्मित्त (cid:7076)वित प्राकृ तिक गैस जिसमे जी.वी.डब्लू. > 3.5 टी है, वह एआईएस -024 और एआईएस -028, समय-समय पर संशोधित में, निर्धारित सुरक्षा अपेक्षाओं को पूरा करेगा। ", (ii) नियम 115 के उप-नियम (1) में,
पैरा ड. में, "सीएनजी" अक्षरों के स्थान पर, अक्षर और शब्द "सीएनजी / बायो-सीएनजी / एलएनजी" रखा जाएगा;
पैरा च के , टिप्पण में, (cid:7059)म संख्या 3 के प(cid:7391)ात, निम्नलिखित (cid:7059)म संख्या अंतःस्थापित किया जाएगा, अर्थात्:-
'3(क) "एलएनजी समर्पित वाहन से अभिप्रेत है वह वाहन जो उनके रजिस्ट्रीकरण से पहले, विनिर्माताओं द्वारा एलएनजी संचालन के लिए निर्मित किए जाते हैं,"
उपाबंध 9 के स्थान पर, निम्नलिखित उपाबंध रखा जाएगा, अर्थात् :-
उपाबंध 9
(नियम 115 ख की मद ई देखें)
आंतरिक दहन इंजन वाले वाहनों में सीएनजी/ जैव सीएनजी / एलएनजी ईंधन के उपयोग के लिए सुरक्षा जांच (एआईएस - 028 के अनुसार) और भारतीय गैस सिलेंडर नियम (समय-समय पर संशोधित)
| ᮓ. सं. | सीएनजी / जैव सीएनजी / एलएनजी किट घटक | प्रमाणीकरण / सत्यापन प्राधिकारी | एआईएस -028 / अन्य ख ंड, नियम, मानक आदि |
| 1. | सीएनजी / जैव सीएनजी / एलएनजी सिलेंडर * | पीईएसओ, नागपुर के मामले में विदेशों के निर्माण से प्रमाणित करने या पृष्ठांकन करने के लिए | ग ैस सिलेंडर नियम 2004,पीईएसओ द्वारा अनुमोदित अ ंतर्राष्ट्रीय मानक हैं |
| 1.1 | वाहन पर सिलेंडर निर्धारण का फिटमेंट | एआईएस -028 के अनुसार, सत्यापित करने के लिए परीक्षण अभिकरण | एआईएस - 028 की धारा 2.3, 2.5 और 2.6 |
| 2. | सीएनजी / एलएनजी (बंद वाल्व) सिलेंडर वाल्व | पीईएसओ, नागपुर को विदेशो से प्रमाणित करने या पृष्ठांकन करने क े लिए | (सीएनजी वाल्व्स के लिए) पीईएसओ द्वारा अनुमोदित गैस सिलेंडर नियम 2004 या अ ंतर्राष्ट्रीय मानक |
| 3. | नियामक (सीएनजी) / विनियमित और वाष्पीकरण / ताप एक्सचेंजर (एलएनजी) * | आईएस 15713 या आईएसओ -15500 के अनुसार, परीक्षण अभिकरण द्वारा घटक का परीक्षण । वैकल्पिक रूप से, परीक्षण अभिकरण, प्रमाणित परीक्षण प्रयोगशाला प्रत्यायित द्वारा जारी मानक के अनुसार, परीक्षण प्रमाण पत्र या रिपोर्ट की पुष्टि को प्रमाणित करने के लिए। एलएनजी नियामक और वाष्पीकरणकर्ता/ गर्मी एक्सचेंजर ईसीई आर110 या समतुल्य मानक की अपेक्षाओं को पूरा करेगा | आईएस: 15713 या आईएसओ -15500 ई सीई आर110 या समतुल्य मानक |
| 4 | ग ैस एयर मिक्सर | आईएस 15713 या आईएसओ -15500 के अनुसार, परीक्षण अभिकरण द्वारा घटक का परीक्षण । वैकल्पिक रूप से, परीक्षण अभिकरण, प्रमाणित परीक्षण प्रयोगशाला द्वारा जारी मानक के अनुसार, परीक्षण प्रमाण पत्र या रिपोर्ट की पुष्टि को प्रमाणित करने के लिए। | आई एस: 15714 या आईएसओ -15500 |
| 5. | ग ैस इंजेक्टर | आईएस -15500 के अनुसार, परीक्षण अभिकरण द्वारा घटक का परीक्षण । वैकल्पिक रूप से, परीक्षण अभिकरण, प्रमाणित परीक्षण प्रयोगशाला प्रत्यायित द्वारा जारी मानक के अनुसार, परीक्षण प्रमाण पत्र या रिपोर्ट की पुष्टि को प्रमाणित करने के लिए। | आईएसओ -15500 |
| 6 | प ेट्रोल सोलनॉइड वाल्व* | परीक्षण अभिकरण द्वारा आई एस: 15717 के अनुसार घटक का परीक्षण करना। वैकल्पिक रूप से, परीक्षण अभिकरण को प्रमाणित परीक्षण प्रयोगशाला द्वारा प्रत्यायित जारी मानक के अनुसार परीक्षण प्रमाण पत्र या रिपोर्ट की पुष्टि करने के लिए | आई एस: 15717 |
| 6.1 | ग ैस सोलेनोइड वाल्व* | आईएस के अनुसार घटक का परीक्षण: 15712 या परीक्षण अभिकरण द्वारा आईएसओ -15500। वैकल्पिक रूप से, परीक्षण अभिकरण को प्रमाणित परीक्षण प्रयोगशाला द्वारा प्रत्यायित जारी मानक के अनुसार परीक्षण प्रमाण पत्र या रिपोर्ट की पुष्टि करने के लिए । एलएनजी प्रणाली का स्वचालित वाल्व ईसीईआर110 या समतुल्य मानक की अपेक्षाओं को पूरा करेगा | आईएस: 15712या आईएसओ -15500 एलएनजी प्रणाली का स्वचालित वाल्व ईसीईआर110 या समतुल्य मानक की अपेक्षाओं को प ूरा करेगा |
| 7. | सीएनजी / एलएनजी प्रत्यारोपण क े लिए कनेक्शन भरना (एनजेडएस | एआईएस -028 के अनुसार, परीक्षण अभिकरण द्वारा वाहन पर स ंस्थापन की जानी चाहिए। | एआईएस -028 क े 2.2.2, 2.2.3, 2.2.4, 2.2.5 और 2.2.6 के ख ंड |
| और एनजीवी-1 प्रकार) | |||
| 8. | स ंवातन | सत्यापित करने के लिए परीक्षण अभिकरण | एआईएस -028 के खंड 2.4.2 |
| 9. | नाली का परीक्षण* | घटक का परीक्षण या प्रमाण पत्र का सत्यापन या आई एस: 15715 के अनुसार, परीक्षण अभिकरण द्वारा परीक्षण रिपोर्ट। | आई एस: 15715 |
| 10. | सीएनजी / जैव सीएनजी / एलएनजी ईंधन लाइन | ||
| 10.1 | उᲬ दबाव 100 के पीएसे अधिक | ||
| 10.1.1 | 2.15 एमपीए से अधिक | ||
| कठोर पाइप | घटक का परीक्षण या प्रमाण पत्र का सत्यापन या आई एस: 15716 के अनुसार, परीक्षण अभिकरण द्वारा परीक्षण रिपोर्ट। एलएनजी कठोर पाइपलाइन ईसीईआर 110 या समतुल्य मानक की अपेक्षाओं को पूरा करेगा। | आईएस:15716 इसीएसआर 110 या समतुल्य मानक | |
| नमनीय नली | घटक का परीक्षण या प्रमाण पत्र का सत्यापन या आई एस: 15718 के अनुसार, परीक्षण अभिकरण द्वारा परीक्षण रिपोर्ट। एलएनजी पाइपलाइन ईसीई आर110 या समतुल्य मानक की अपेक्षाओं को पूरा करेगा। | आई एस: 15718 ईसीई आर110 या समतुल्य मानक | |
| 10.1.2 | 2.15 एमपीए तक दबाव | घटक का परीक्षण या प्रमाणपत्र का सत्यापन या आई एस: 15722 के अनुसार, परीक्षण अभिकरण द्वारा परीक्षण रिपोर्ट। ईसीई आर 110 या समतुल्य मानक एलएनजी पाइपलाइन ईसीई आर110 या समतुल्य मानक की अपेक्षाओं को पूरा करेगा। | आई एस:15722 स ंशोधन के साथ ईसीई आर110 या समतुल्य मानक |
| 10.2 | जोड़ और संपर्क | परीक्षण अभिकरण द्वारा परीक्षण एलएनजी जोड़ और संपर्क को ईसीई आर110 या समतुल्य मानक की अपेक्षाओं को पूरा करेगा। | एआई एस-028 के खंड 3.2.1(ख) को ईसीई आर 110 या समतुल्य मानक |
| 11 | डिब्बे या उप डिब्बे | घटक का परीक्षण, परीक्षण अभिकरण द्वारा प्रमाण पत्र का सत्यापन या परीक्षण रिपोर्ट, आईएस 15720 के अनुसार है: | आई एस: 15720 |
| 12 | विर्निदिष्ट एलएनजी घटक | (क)निम्न विर्निदिष्ट घटक, जैसा की लागू है, ईसीईआर110 या अन्य समतुल्य मानक की अपेक्षाओं को पूरा करेगा | ईसीईआर 110 या समतुल्य मानक |
| (ख)इलेक्ट्रॉनिक नियंत्रण इकाई, दबाव और / या तापमान सेंसर (यदि एलएनजी सिलेंडर का भाग नहᱭ है) | |||
| 13. | सीएनजी / जैव सीएनजी / एलएनजी प्रणाली की संस्थापन के लिए सुरक्षा जांच | एआईएस -028 के अनुसार, परीक्षण अभिकरण द्वारा किए जाने वाले सुरक्षा जांच | एआईएस -028 की स ुसंगत के खंडो में |
*मूल देश की मान्यता प्रत्यायित प्राप्त परीक्षण अभिकरण द्वारा जारी प्रमाण पत्र या अंतरराष्ट्रीय स्तर पर मान्यता प्राप्त परीक्षण प्रयोगशाला द्वारा जारी एक रिपोर्ट भी स्वीकार किया जा सकता है।
टिप्पण 1 - के वल मानकों, समय-समय पर संशोधित, जैसा कि ऊपर निदिष् ट है, अनुपालन के लिए भेजा जाएगा।
टिप्पण 2 - एलएएनजी प्रणाली वाष्पीकरण / ऊष्मा एक्सचेंजर को काम करने वाले घटको को सीएनजी घटकों के रूप में माना जाएगा।
टिप्पण 3 - परीक्षण अभिकरण को वाणिज्यिक उपलब्ध एलएनजी ईंधन के साथ लागू होने वाले सीएमवीआर परीक्षण करना है, करने के लिए ।"
(iv) उपाबंध 4-ठ के प(cid:7391)ात, निम्नलिखित उपाबंध रखा जाएगा, अर्थात्:-
"उपाबंध 4-ठक"
(नियम 115 ख़ के उप-नियम (3) के परन्तुक को देखें)
संदर्भ एलएनजी ईंधन की तकनीकी विनिद(cid:7287)श
| ᮓमांक | घटक | सांᮤ |
| 1 | मीथेन% | 87.33-99.71 |
| 2. | ईथेन% | 0.09-10.26 |
| 3. | प्रोपेन% | 0.03-3.56 |
| 4. | ब्यूटेन% | 0.148 |
| 5. | सल्फर | <10 पीपीएम |
| 6. | एलएनजी घनत्व किलोᮕाम / एम 3 | 421.39-467.35 |
| 7. | विस्तार अनुपात एम 3 (एन) / एम 3 लिक | 558-600.0 |
| 8 | गैस जीसीवी एमजे / एम 3 (एन) | 39.91-46.24 |
| 9. | वोबी सूचकांक एमजे / एम 3 (एन) | 53.51-56.77". |
[फा. सं. आरटी-11028/15/2016-एमवीएल]
अभय दामले, संयुक्त सचिव
टिप्पण : मूल नियम, भारत के राजपत्र, असाधारण, भाग II, खंड 3, उपखंड (i) में अधिसूचना सं. सा.का.नि. 590(अ), तारीख 2 जून, 1989 को प्रकाशित किए गए थे और अंतिम बार अधिसूचना सं.सा.का.नि. 485(अ), तारीख 19.05.2017 को संशोधित किए गए ।
MINISTRY OF ROAD TRANSPORT AND HIGHWAYS
NOTIFICATION
New Delhi, the 27th June, 2017
G.S.R. 643(E).—Whereas, the draft of certain rules further to amend the Central Motor Vehicles Rules, 1989, was published as required by sub-section (1) of section 212 of the Motor Vehicles Act, 1988 (59 of 1988) vide notifications of Government of India in the Ministry of Road Transport and Highways number G.S.R. 402(E), dated the 21st April, 2017, in the Gazette of India, Extraordinary, Part II, Section 3, Sub-section (i), inviting objections and suggestions from all persons likely to be affected therby, within a period of seven days from the date on which copies of the Gazette containing the said notification were made available to public;
6 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]AND whereas, copies of the said Gazette notification were made available to the public on the 21st April, 2017;
And whereas, no objections and suggestions were received from the public in respect of the said draft rules;
Now, therefore, in exercise of the powers conferred by section 110 of the Motor Vehicles Act, 1988 (59 of 1988), the Central Government hereby makes the following rules further to amend the Central Motor Vehicles Rules, 1989, namely: -
1. Short title and commencement.—(1) These rules may be called the Central Motor Vehicles (10th Amendment) Rules, 2017.
(2) They shall come into force on the date of their publication in the Official Gazette.
2. In the Central Motor Vehicle Rules, 1989, -
(i) rule 115B shall be renumbered as sub-rule (1) thereof and after sub-rule (1) as so renumbered, the following shall be inserted, namely: -
"(2)The mass emission standards applicable to Original Equipment CNG Dedicated Vehicles under sub-rule (1) shall be applicable to Original Equipment manufactured vehicle having GVW ≥ 3.5 T, when Liquified Natural Gas is used as fuel.
(3)The Liquified Natural Gas composition used for carrying out emission shall meet the fuel specification as notified by the Government of India in the Ministry of Petroleum and Natural Gas, or Bureau of Indian Standard, as the case may be, for automotive application from time to time:
Provided that till such time the Liqiufied Natural Gas fuel complying to the requirements as provided in Annexure IV- LA shall be used for the purpose of type approval and conformity of production.
(4) The Original Equipment manufactued Liqiufied Natural Gas dedicated vehicle having GVW ≥3.5 T shall meet the safety requirements as laid down in AIS-024 and AIS- 028 as amended from time to time.";
(ii) in rule 115B, in sub-rule (1),-
(a) in para E, for the letters "CNG", the letters and word "CNG/bio-CNG/ LNG" shall be substituted;
(b) in para F, in the Note, after serial number 3, the following serial number shall be inserted, namely: - '3(a) "O.E. LNG Dedicated Vehicle" means the vehicles which are manufactured for LNG operation by the vehicle manufacturers prior to their first registration;';
(iii) for Annexure IX, the following Annexure shall be substituted, namely: -
"Annexure IX
(see para E of rule 115B)
SAFETY CHECKS FOR USE OF CNG / BIO-CNG/LNG FUELS IN INTERNAL COMBUSTION ENGINED VEHICLES (AS PER AIS-028) and
INDIAN GAS CYLINDER RULES
(as amended from time to time)
| Sr. No. | CNG / BIO- CNG/LNG Kit Component | Certifying /Verifying Authority | Clause of AIS-028 / Other Rules and Standards |
| 1 | CNG / BIO- CNG/LNG Cylinder* | PESO, Nagpur to certify or endorse in case of foreign make | Gas cylinder rules 2004 or International standards as endorsed by PESO |
| 1.1 | Fitment of cylinder on vehicle | Test agency to verify as per AIS-028 | Clause no. 2.3, 2.5 and 2.6 of AIS-028 |
| 2 | CNG/LNG (Shut off valve) Cylinder valves* | PESO, Nagpur to certify or endorse in case of foreign make | IS: 3224(for CNG valves) or Gas cylinder rules 2004 or International standards as endorsed by PESO |
| 3 | Regulator (CNG) / R egulator and Vaporiser/heat exchanger (LNG)* | Testing of the component as per IS: 15713or ISO- 15500 by test agency. Alternatively, test agency to verify the test certificate or report conforming to the above standard issued by accredited testing laboratory. L NG regulator and Vaporiser/heat exchanger shall meet requirements of ECE R110 or equivalent standard | IS: 15713 or ISO-15500 E CE R110 or equivalent standard |
| 4 | Gas-Air Mixer* | Testing of the component as per IS :15714 or ISO-15500 by test agency. Alternatively, test agency to verify the test certificate or report conforming to the above standard issued by accredited testing laboratory. | IS: 15714 or ISO-15500 |
| 5 | Gas Injector* | Testing of the component as per ISO-15500 by test agency. Alternatively, test agency to verify the test certificate or report conforming to the above standard issued by accredited testing laboratory. | ISO-15500 |
| 6 | Petrol Solenoid Valve* | Testing of the component as per IS: 15717 by test agency. Alternatively, test agency to verify the test certificate or report conforming to the above standard issued by accredited testing laboratory. | IS: 15717 |
| 6.1 | Gas Solenoid Valve* | Testing of the component as per IS: 15712 or ISO- 15500 by test agency. Alternatively, test agency to verify the test certificate or report conforming to the above standard issued by accredited testing laboratory. A utomatic valve of LNG System shall meet requirements of ECE R110 or equivalent standard | IS: 15712 or ISO-15500 A utomatic Valve for LNG System : ECE R110 or equivalent standard |
| 7 | Filling Connection (NZS & NGV-1 type) for CNG / LNG receptacle | Installation on vehicle to be checked by test agency as per AIS-028 | Clauses 2.2.2, 2.2.3, 2.2.4, 2.2.5 and 2.2.6 of AIS-028 |
| 8 | Ventilation | Test agency to verify. | Clause 2.4.2 of AIS-028 |
| 9 | Testing of Conduit* | Testing of the component or verification of certificate or test report as per IS: 15715by test agency. | IS: 15715 |
| 10 | CNG / BIO-CNG/LNG fuel line | ||
| 10.1 | High pressure — exceeding 100 kPa* | ||
| 10.1.1 | Exceeding 2.15 MPa | ||
| - Rigid pipe | Testing of the component or verification of certificate or test report as per IS: 15716 by test agency. L NG rigid pipeline shall meet requirements of ECE R110 or equivalent standard | IS: 15716 E CE R 110 or equivalent standard | |
| - Flexible hose | Testing of the component or verification of certificate or test report as per IS 15718 by test agency. L NG pipeline shall meet requirements of ECE R110 or equivalent standard | IS 15718 E CE R110 or equivalent standard | |
| 10.1.2 | Pressure upto 2.15 Mpa | Testing of the component or verification of certificate or test report as per IS: 15722 by test agency. L NG pipeline shall meet requirements of ECE R110 or equivalent standard | IS: 15722 with amendments E CE R110 or equivalent standard |
| 10.2 | Joints and connections* | Testing by test agency. L NG joints & connection shall meet requirements of ECE R110 or equivalent standard. | Clause 3.1.4.1, 3.2.1 (b) of AIS-028 E CE R110 or equivalent standard |
| 11 | Compartment or Sub-compartment* | Testing of the component or verification of certificate or test report as per IS: 15720by test agency. | IS: 15720 |
| 12 | Specific LNG components | (a) Following specific components, as applicable shall meet requirements of ECE R 110 or other International standards (b) Electronic Control Unit, Pressure and/or temperature sensor (if not part of LNG cylinder) | ECE R 110 or equivalent standard |
| 13 | Safety check for installation of CNG / BIO-CNG/LNG system | Safety checks to be carried out by test agency as per AIS-028. | Relevant clauses of AIS-028 |
* Certificate issued by accredited testing agency of the country of origin or a report issued by internationally accredited test laboratory may also be accepted.
Note 1 -Only the standards, as amended from time to time, as mentioned above, shall be referred for compliance.
Note 2 -LNG system Components downstream of Vaporiser or heat exchanger shall be considered as CNG components.
Note 3 - Test agency to conduct applicable CMVR test as applicable with commercial available LNG fuel.";
(iv) after Annexure IV- L, the following Annexure shall be inserted, namely: -
"Annexure IV-LA
(see the proviso to sub-rule (3) of rule 115B)
TECHNICAL SPECIFICATIONS OF THE REFERENCE LNG FUEL
| Sr. No | Component | Concentration |
| 1. | Methane % | 87.33-99.71 |
| 2. | Ethane % | 0.09-10.26 |
| 3. | Propane % | 0.03-3.56 |
| 4. | Butane + % | 0-1.48 |
| 5. | Sulphur | <10 ppm |
| 6. | LNG Density kg/m3 | 421.39-467.35 |
| 7. | Expansion ratio m3(n)/m3 liq | 558-600.0 |
| 8. | Gas GCV MJ/m3(n) | 39.91-46.24 |
| 9. | Wobbe Index MJ/m3(n) | 53.51-56.77". |
[F. No. RT- 11028/15/2016-MVL]
ABHAY DAMLE, Jt. Secy.
Note : The principal rules were published in the Gazette of India, Extraordinary, Part II, Section 3, Sub-section (i) vide notification number G.S.R. 590(E), dated the 2nd June, 1989 and last amended vide notification number G.S.R 485(E), dated 19.05.2017.
Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064 and Published by the Controller of Publications, Delhi-110054.