Servants of Knowledge
Extraordinary Gazette of India · Government of India

Notifying QCO for Hinges (Quality Control) Order, 2023.

Published 12 December 2023

Ministry
Ministry of Commerce and Industry
Department
DEPARTMENT FOR PROMOTION OF INDUSTRY AND INTERNAL TRADE
Office
Not Applicable
Gazetteid
CG-DL-E-12122023-250602
Identifier
in.gazette.central.e.2023-12-12.250602
Languages
English, Hindi
Published at
Original source ↗

click here for IIIF manifest

रजिस्ट्री सं. डी.एल.- 33004/99

REGD. No. D. L.-33004/99

सी.जी.-डी.एल.-अ.-12122023-250602

CG-DL-E-12122023-250602

xxxGIDHxxx

xxxGIDExxx

असाधारण

EXTRAORDINARY

भाग II—खण्ड 3—उप-खण्ड (ii)

PART II—Section 3—Sub-section (ii)

प्राधिकार से प्रकाशित

PUBLISHED BY AUTHORITY

सं. 5065] नई दिल्ली, मंगलवार, दिसम्बर 12, 2023/अग्रहायण 21, 1945

No. 5065] NEW DELHI, TUESDAY, DECEMBER 12, 2023/AGRAHAYANA 21, 1945

वाणिज्य और उद्योग मंत्रालय

(उद्योग संवर्धन और आंतरिक व्यापार विभाग)

आदेश

नई दिल्ली, 8 दिसम्बर, 2023

का.आ. 5294(अ).—भारतीय मानक ब्यूरो अधिनियम, 2016 (2016 का 11) की धारा 16 द्वारा प्रदत्त शक्तियों का प्रयोग करते हुए, कें द्र सरकार का, भारतीय मानक ब्यूरो के साथ परामर्श करने के बाद यह मत है कि यह जनहित में आवश्यक अथवा हितकर है, अत: एत्द्वारा निम्नलिखित आदेश करती है, नामत:-

1. संक्षिप्त शीर्षक और प्रारंभ - (1) इस आदेश को हिजेज (गुणवत्ता नियंत्रण) आदेश, 2023 कहा जाएगा।

(2) यह आदेश शासकीय राजपत्र में इस अधिसूचना के प्रकाशन की तारीख से छह माह के बाद लागू होगा। 2. मानक चिह्न का अनिवार्य प्रयोग – निचे दी गई तालिका के कॉलम (1) में विनिदिष्ट वस्तुएं या सामान उक्त तालिका के कॉलम (2) में उल्लिखित तदनुरूपी भारतीय मानक के अनुरूप होंगे तथा उनमें भारतीय मानक बब्यूरो (अनुपालन मूल्यांकन) विनियम, 2018 की अनुसूची-II की स्कीम-I के अनुसार भारतीय मानक ब्यूरो के लाइसेंस के तहत मानक चिह्न लगा होगा।

बशर्ते कि इस आदेश में से कु छ भी निर्यात की जाने वाली स्वदेश में विनिमित वस्तुओं या सामान पर लागू नहीं होगा। इसके अतिरिक्त बशर्ते कि सूक्ष्म उद्यमों के लिए, जैसा कि सूक्ष्म, लघु और मध्यम उद्यम विकास अधिनियम, 2006 (2006 का 27) की धारा 2 के क्रमशः खंड (ज) और (ड) में परिभाषित किया गया है, यह आदेश इस अधिसूचना के प्रकाशन की तारीख से बारह माह की अवधि की समाप्ति तक लागू नहीं होगा।

7687 GI/2023

(1) 2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(ii)] इसके अतिरिक् त बशर्ते कि लघु उद्यमों के लिए, जैसा कि सूक्ष्म, लघु और मध्यम उद्यम विकास अधिनियम, 2006 (2006 का 27) की धारा 2 के क्रमशः खंड (ज) और (ड) में परिभाषित किया गया है, यह आदेश इस अधिसूचना के प्रकाशन की तारीख से नौ माह की अवधि की समाप्ति तक लागू नहीं होगा।

3. प्रमाणन और प्रवर्तन प्राधिकरण – ब्यूरो उक्त तालिका में विनिदिष्ट वस्तुओं या सामान के लिए प्रमाणन और प्रवर्तन प्राधिकरण होगा।

4. उल्लंघन के लिए पेनल्टी– इस आदेश के प्रावधानों का उल्लंघन करने वाले व्यक्ति को भारतीय मानक ब्यूरो अधिनियम, 2016 के प्रावधानों के तहत दंडित किया जाएगा।

तालिका

वस्तु या सामान भारतीय मानक भारतीय मानक का शीर्षक
(1) (2) (3)
हिजेज 12817:2020 स्टेनलेस स्टील बट हिजेज
1341:2018 स्टील बट हिजेज
205:1992 नॉन-फे रस मेटल बट हिजेज
206:2010 टी एंड स्ट्रेप हिजेज
362:1991 पालियामेंट हिजेज
3818:1992 क ं टिन्यूअस (पियानो) हिजेज
3843:1995 स्टील बैक फ्लैप हिजेज
453:1993 डबल-ऐक्टिग स्प्रिग हिजेज
18297:2023 क ै बिनेट हिजेज

नोट – इस तालिका के प्रयोजन के लिए, भारतीय मानकों के संबंध में जारी संशोधनों सहित उनके नवीनतम संस्करण, जैसा कि भारतीय मानक ब्यूरो द्वारा समय-समय पर अधिसूचित किए गए हैं, लागू होंगे।

[फा.सं.पी-29026/11/2023– एलईआई]

संजीव, संयुक्त सचिव MINISTRY OF COMMERCE AND INDUSTRY

(Department for Promotion of Industry and Internal Trade)

ORDER

New Delhi, the 8th December,2023

S.O. 5294(E).—In exercise of the powers conferred by section 16 of the Bureau of Indian Standards Act, 2016 (11 of 2016), the Central Government, after consulting the Bureau of Indian Standards, is of the opinion that it is necessary or expedient so to do in the public interest, hereby makes the following order, namely:-

1. Short title and commencement.- (1) This order may be called the Hinges (Quality Control) Order, 2023.

(2) It shall come into force on the expiry of six months from the date of publication of this notification in Official Gazette.

2. Compulsory use of Standard Mark.- Goods or articles specified in column (1) of the Table below shall conform to the corresponding Indian Standard mentioned in column (2) of the said Table and shall bear the Standard Mark under a license from the Bureau of Indian Standards as per Scheme-1 of Schedule-II to the Bureau of Indian Standards (Conformity Assessment) Regulations, 2018:

{{^{{FOOTNOTE 3 }}}} [भाग II—खण्ड 3(ii)] भारत का राजपत्र : असाधारण

Provided that nothing in this order shall apply to goods or articles manufactured domestically for export:

Provided further that in relation to micro enterprises, as defined in clauses (h) and (m), respectively of section 2 of the Micro, Small and Medium Enterprises Development Act, 2006 (27 of 2006), it shall come into force on the expiry of twelve months from the date of publication of this notification.

Provided further that in relation to small enterprises, as defined in clauses (h) and (m), respectively of section 2 of the Micro, Small and Medium Enterprises Development Act, 2006 (27 of 2006), it shall come into force on the expiry of nine months from the date of publication of this notification.

3. Certification and enforcement authority.- The Bureau shall be the certifying and enforcing authority for the goods or articles specified in the Table.

4. Penalty for Contravention. – Any person who contravenes the provisions of this order shall be punishable under the provisions of the Bureau of Indian Standards Act, 2016.

TABLE

Goods or articles Indian Standard Title of Indian Standard
(1) (2) (3)
Hinges 12817:2020 Stainless steel butt hinges
1341:2018 Steel Butt Hinges
205:1992 Non-ferrous metal butt hinges
206:2010 Tee and strap hinges
362:1991 Parliament hinges
3818:1992 Continuous (Piano) hinges
3843:1995 Steel back flap hinges
453:1993 Double-acting spring hinges
18297:2023 Cabinet hinges

Note.- For the purposes of the table, the latest version of Indian Standards including the amendments thereof, as notified by the Bureau of Indian Standards from time to time shall apply.

[F. No. P-29026/11/2023-LEI]

SANJIV, Jt. Secy.

Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064 and Published by the Controller of Publications, Delhi-110054.

Cite this issue. Extraordinary Gazette of India, Government of India, 12 December 2023. Indian Gazettes, https://egazette.servantsofknowledge.in/details/in.gazette.central.e.2023-12-12.250602/. Archive identifier in.gazette.central.e.2023-12-12.250602.