This Gazette may contains Multiple Subjects

रजिस्ट्री सं. डीएल-33001 / 2003

REGISTERED No. DL -33001 /2003 भारत का राजपत्र The Gazette of India

प्राधिकार से प्रकाशित

PUBLISHED BY AUTHORITY

नई दिल्ली, शनिवार , 29 मार्च , 2003 ( चैत्र 8 , 1925 )

सं० 13]

NEW DELHI , SATURDAY, MARCH 29 , 2003 ( CHAITRA 8 , 1925 )

No. 13]

इस भाग में भिन्न पृष्ठ संख्या दी जाती है जिससे कि यह अलग संकलन के रूप में रखा जा सर्वहै । (Separate paging is given to this Part in order that it may be filed as a separate compilation)

भाग III-खण्ड 2

[PART III- SECTION 2 ]

[पेटेन्ट कार्यालय द्वारा जारी की गई पेटेन्टों और डिजाइनों से सम्बन्धित अधिसूचनाएं और नोटिस] [Notifications and Notices Issued by the Patent Office relating to Patents and Designs ] THE PATENT OFFICE

PATENTS AND DESIGNS

Kolkata, the 29th March 2003

ADDRESSES AND JURISDICTION OF THE OFFICES OF THE PATENT OFFICE

The Patent Office has its Head Office at Kolkata and Branch Offices at Mumbai , Delhi and Chennai having Territorial Jurisdiction on a Zonal basis as shown below:-

1. Patent Office Branch , Todi Estates , IlIrd Floor, SunMill Compound, Lower Parel (West) , MUMBAI -400 013 .

The States of Gujarat , Maharashtra , Madhya Pradesh, Goa and Chhattisgarh and the Union Territories of Daman and Diu & Dadra and Nagar Haveli .

Telegraphic Address " PATOFFICE "

Phone No. (022 ) 492 4058 , 496 1370 , 490 3684.

Fax No. (022 ) 490 3852.

1-517G1/2002

2. Patent Office Branch ,

W- 5 , West Patel Nagar ,

New Delhi - 110 008 .

The States of Haryana,

Jaınınu and Kashmir ,

Himachal Pradesh , Punjab , Rajasthan , ' Uttar Pradesh , Uttaranchal , Delhi and the Union Territory of Chandigarh .

Telegraphic Address " PATEN OFIC"

Phone No. (011 ) 587 1255, 587 1256 ,

587 1257 , 587 1258 , 587 7245.

Fax No. (011 ) 587 6209 , 587 2532 ..

3. Patent Office Branch ,

Guna Complex, 6th Floor , Annex - II , 443. Annasalai , Teynampet , Chennai - 600 018 .

The States of Andhra Pradesh,

Karnataka , Kerala, Tamilnadu and Pondicherry and the Union Territories of Lakshadweep .

(1117) 1118

Telegraphic Address " PATENTOFFIC"

Phone No. (044) 431 4324/4325/4326 . Fax No. ( 044) 431 4750/4751 .

4. Patent Office ( Head Office) , Nizam Palace, 2nd M.S.O. Building , 5th, 6th & 7th Floor, 234/4 , Acharya Jagadish Bose Road, Kolkata- 700 020.

Restof India .

Telegraphic Address " PATENTS " Phone No. ( 053 ) 247 4401 , 247 4402 , 247 4403. Fax No. (033) 247 3851 , 033 240 1353 .

पेटेंट कार्यालय एकस्व तथा अभिकल्प

कोलकाता, दिनांक 29 मार्च 2003

पेटेंट कार्यालय के कार्यालयों के पते एवं क्षेत्राधिकार पेटेंट कार्यालय का प्रधान कार्यालय कोलकाता में अवस्थित है तथा मम्बई, दिल्ली एवं चेन्नई में इसके शाखा कार्यालय हैं, जिनके प्रादेशिक क्षेत्राधिकार जोन के आधार पर निम्न रूप में प्रदर्शित हैं : -- 1. पेटेंट कार्यालय शाखा, टोडी इस्टेट, तीसरा तल, सन मिल कम्पाउंड, लोअर परेल ( वेस्ट) , मुम्बई - 400 031

गुजरात, महाराष्ट्र मध्य प्रदेश, गोआ तथा छत्तीसगढ़ राज्य क्षेत्र एवं संघ शासित क्षेत्र दमन तथा दीव, दादर और नगर हवेली ।

तार पता " पेटोफिस" फोन-(022)492 4058 , 496 1370 , 490 3684 . फैक्स ( 022 ) 490 3852.

2. पेटेंट कार्यालय शाखा, डब्ल्यू-5 , वेस्ट पटेल नगर, नई दिल्ली 110 0081

हरियाणा , हिमाचल प्रदेश, जम्मू तथा कश्मीर, पंजाब, राजस्थान, उत्तर प्रदेश , दिल्ली तथा उत्तरांचल राज्य क्षेत्रों एवं संघ शासित क्षेत्र चंडीगढ़ ।

तार पता " पेटेंटीफिक " फोन (011 ) 387 1255 , 587 1256, 587 1257 , 587 1258 , 587 7245 .

फैक्स (011) 587 6209 , 587 2532 .

[PART III-SEC . 2

THE GAZETTE OF INDIA , MARCH 29 , 2003 ( CHAITRA 8 , 1925)

All applications , notices , statements or other documents or any fees required by the Patents Act , 1970 as amended by the Patents (Amendment ) Act, 1999 or the Patents Rules , 1972 as amended by The Patents ( Amendment) Rules , 1999 will be received only at the appropriate offices of the Patent Office .

Fees : The fees may either be paid in cash or may be sent by Bank Draft or Cheques payable to the Controller of Patents drawn on a scheduled Bank at the place where the appropriate office is situated .

3. पेटेंट कार्यालय शाखा, गुना कम्प्लेक्स, छठा तल , एनेक्स II , 443, अन्नासलाई , तेनामपेट, चेन्नई 600.0181

आन्ध्र प्रदेश , कर्नाटक, केरल , तमिलनाडु तथा पाण्डिचेरी राज्य क्षेत्र एवं संघ शासित क्षेत्र लक्षद्वीप ।

तार पता " पेटेंटोफिक " फोन - (044) 431 4324/4325/4326. फैक्स ( 044 ) 431 4750/4751 .

4. पेटेंट कार्यालय ( प्रधान कार्यालय ) , निजाम पैलेस, द्वितीय बहुतलीय कार्यालय भवन, 5वां , 6ठा व 7 वां तल, 234/4, आचार्य जगदीश बोस मार्ग , कोलकाता - 700 0201

भारत का अवशेष क्षेत्र ।

तार पता -" पेटेंट्स " फोन-(033 ) 247 4401 , 247 4402, 247 4403. फैक्स ( 033 ) 247 3851 , ( 033 ) 240 1353 .

पेटेंट अधिनियम , 1970 तथा पेटेंट ( संशोधन ) अधिनियम , 1999 अथवा पेटेंट ( संशोधन) नियम , 1972 द्वारा अपेक्षित सभी आवेदन, सूचनाएं, विवरण या अन्य दस्तावेज या कोई फीस पेटेंट कार्यालय के केवल समुचित कार्यालय में ही ग्रहण किए जाएंगे ।

शुल्क : शुल्कों की अदायगी या तो नकद की जाएगी अथवा जहां उपयुक्त कार्यालय अवस्थित हैं , उस स्थान के अनुसूचित बैंक से नियंत्रक को भुगतान योग्य बैंक ड्राफ्ट अथवा चैक द्वारा की जा सकती है । 1119 THE GAZETTE OF INDIA , MARCH 29, 2003 ( CHAITRA 8, 1925)

PART III-SEC . 2 ]

THE PATENT OFFICE KOLKATA –29.03.2003

APPLICATION FOR THE PATENT FILED AT THE HEAD OFFICE 234/4 ACHARYA JAGDISH BOSE KOLKATA – 700 020.

The data shown in the crecent bracket are the dated claimed under section 135 , under Patent Act, 1970

03.01.2003

07 /KOL/03

MAZUMDAR TIRTHANKER. A RECIPROCATING I C ENGINE THAT DELIVERS COMPRESSED GAS DIRECTLY.

08/KOL/ 03

RAWATSONS ENGINEERS (P) LTD . A DEVICE FOR LUBRICATING THE GAUGE FACE OF THE RAIL AND WHEEL FLANGE.

07.01.2003

KONINKLIJKE PHILIPS ELECTRONICS N.V. TRANSMITTER OF A REDUCED COMPLEXITY SIGNAL TRANSMISSION SYSTEM.

09/KOL/03

(DIVIDED OUT OF NO . 112/CAL/ 97 ANTEDATED TO 21.01.1997 . ) KONINKLIJKE PHILIPS ELECTRONICS N.V. ENCODER OF A REDUCED COMPLEXITY SIGNAL TRANSMISSION SYSTEM .

10/KOL/03

(DIVIDED OUT OF NO . 112/CAL/ 97 ANTEDATED TO 21.01.1997 . )

13.01.2003

11/KOL/03

SANJAY BUDHIA. A STORAGE TANK MADE OF POLYMERIC MATERIAL FOR HOLDING WATER IN RAILWAY COMPARTMENTS .

CHUNG CHWAN ENTERPRISE CO . LTD . POSITIONING MECHANISM OF A ZIPPER SLIDE.

12/KOL/03

(CONVENTION NO . 91203179 FILED ON 15.3.2002 IN TAIWAN. )

14.01.2003

KONINKLIJKE PHILIPS ELECTRONICS N.V. TRANSMITTER OF A

REDUCED COMPLEXITY SIGNAL TRANSMISSION SYSTEM .

13 /KOL/03

(DIVIDED OUT OF NO . 98 /CAL/ 97 ANTEDATED TO 20.01.1997 ) 1120

THE GAZETTE OF INDIA , MARCH 29 , 2003 ( CHAITRA 8 , 1925)

[PART III-SEC. 2 JOHNSON & JOHNSON VISION CARE , INC . OPTHALMIC DEVICES CONTAINING HETEROCYCLIC COMPOUNDS AND METHODS FOR THEIR PRODUCTION.

14/KOL/03

( CONVENTION NOS . 60/348585 AND 10/320572 FILED ON 14.1.02 AND ON 16.12.02 IN U.S.A. RESPECTIVELY. )

15.01.2003

15/KOL/03

NIRMAL CHANDRA SUKUL. A METHOD FOR IDENTIFICATION OF A DRUG AT ULTRA HIGH DILUTION OR A HOMEOPATHIC POTENCY.

MORSE TEC EUROPE , S.R.L. HYDRAULIC TENSIONER OF THE HOLLOW 16/KOL/03 PISTON TYPE WITH A SCREW- TYPE RETAINING DEVICE .

( CONVENTIOΝ ΝΟ . 02425131.6 FILED ON 07.03.02 ΙΝ ΕΡΟ .)

16.01.03

17/KOL/03

GARDEN REACH SHIPBUILDERS & ENGINEERS LTD . DOUBLE LANE PORTABLE STEEL BRIDGE.

17.01.2003

18 / KOL/03

MITSUI CHEMICALS , INC . A PROCESS FOR THE PREPARATION OF A SOLID TITANIUM CATALYST COMPONENT .

( CONVENTION NO . 7-263237 FILED ON 11.10.95 IN JAPAN . )

MERCK PATENT GMBH . COSMETIC BODY PIGMENT AND PROCESS FOR PREPARING THE SAME.

19/KOL/03

(CONVENTION ΝΟ . 2002-013009 FILED ON 22.01.02 IN JAPAN)

20.01.2003

20/ KOL/0B

INFECTIO DIAGNOSTIC ( I.D.I ) I INC . A DIAGNOSTIC KIT FOR THE DETECTION AND/OR QUANTIFICATION OF THE NUCLEIC ACIDS OF ANY COMBINATION OF THE MICROBIAL SPECIES AND/ OR GENERA SELECTED FROM THE GROUP CONSISTING OF ENTEROCOCCUS FAECIUM, LISTERIA MONOCYTOGENES, NEISSERIA MMENINGITIDIS, STAPHYLOCOCCUS SAPROPHYTICUS, STREPTOCOCCUS AGALACTIAE, CANDIDA ALBICANS, ENTEROCOCCUS SPECIES, NEISSERIA SPECIES, STAPHYLOCOCCUS SPECIES, STREPTOCOCCUS SPECIES AND CANDIDA SPECIES. (DIVIDED OUT OF NO . 2153 /CAL/ 97 ANTEDATED TO 13.11.1997 .)

21/ KOL/03 MULTIPLE CORPORATION . RUBBER EXTRUDER .

1121 THE GAZETTE OF INDIA , MARCH 29 , 2003 ( CHAITRA 8 , 1925 )

PART III- SEC . 2]

COMPLETE SPECIFICATION ACCEPTED

Notice is hereby given that any person interested in opposing the grant of a patent on any of the applications concerned , may, at any time within four months from the date of this issue or within such further period not exceeding one month if applied for on Form 4 prescribed under the Patent (Amendment) Rules , 1999 before the expiry of the said period of four months , give notice to the Controller of Patents at the appropriate office on the prescribed Form 7 of such opposition . The written statement of opposition should be filed in duplicate alongwith evidence , if any, with said notice or within sixty days of its date as prescribed in Rule 36 as amended by the Patents ( Amendment ) Rules , 1999.

The Classification given below in respect of each specification are according to Indian Classification and International Classification Systems.

Printed copies of the specification and drawings , if any, can be supplied by the Patent Office or its branch offices on payment of prescribed charges of Rs . 30/- each .

In the event of non - availability of printed specification , photocopies of the specification and drawings , if any, can be supplied by the Patent Office and its branch offices on payment of prescribed photocopy charges @ Rs . 10/ - per page of such document plus Rs . 30/-.

स्वीकृत. संपूर्ण विनिर्देश

एतद्वारा यह सूचना दी जाती है कि संबद्ध आवेदनों में से किसी पर पेटेंट अनुदान के विरोध करने के इच्छुक व्यक्ति, इसके निर्गम की तिथि से चार ( 4 ) महीने या अग्रिम ऐसी अवधि जो उक्त चार ( 4 ) महीने की अवधि की समाप्ति के पूर्व, पेटेंट ( संशोधन ) नियम, 1999 के तहत् विहित प्ररूप 4 पर अगर आवेदित हो , एक महीने की अवधि से अधिक न हो, के भीतर कभी भी नियंत्रक एकस्व को उपयुक्त कार्यालय में ऐसे विरोध की सूचना विहित प्ररूप 7 पर दे सकते हैं । विरोध संबंधी लिखित वक्तव्य दो प्रतियों में साक्ष्य के साथ , यदि कोई हो, उक्त सूचना के साथ या पेटेंट ( संशोधन ) नियम , 1999 द्वारा संशोधित नियम 36 के तहत् यथाविहित उक्त सूचना की तिथि से 60 दिन के भीतर फाईल कर दिये जाने चाहिए ।

प्रत्येक विनिर्देश के संदर्भ में नीचे दिये वर्गीकरण , भारतीय वर्गीकरण तथा अन्तर्राष्ट्रीय वर्गीकरण के अनुरूप हैं । विनिर्देश तथा चित्र आरेख , यदि कोई हो, की अंकित प्रतियों की आपूर्ति पेटेंट कार्यालय या उसके शाखा कार्यालयों से यथाविहित 30/-रुपये प्रति की अदायगी पर की जा सकती है ।

ऐसी परिस्थिति में जब विनिर्देश की अंकित प्रति उपलब्ध नहीं हो, विनिर्देश तथा चित्र आरेख , यदि कोई हो, की फोटो प्रतियों की आपूर्ति पेटेंट कार्यालय या उसके शाखा कार्यालयों से यथाविहित फोटोप्रति शुल्क उक्त दस्तावेज के 10 रुपये प्रति पृष्ठ धन 30/-रुपये की अदायगी पर की जा सकती है । [PART III-SEC . 2 THE GAZETTE OF INDIA , MARCH 29 , 2003 ( CHAITRA 8 , 1925 )

1122

189551 :

IND . CL .

179 F [XL( 6) ]

: B:65 D - 53/00

INT . CL .

:

AN IMPROVED SEAL

TITLE

APPLICANT

JALOO JIMMY CANTEENWALLA, SORAB JIMMY CANTEENWALLA, PEENAZ JIMMY CANTEENWALLA , Y-5 , CAMA BUILDING , CAMA ROAD , ANDHERI WEST, MUMBAI 400 058 , MAHARASHTRA, INDIA . ALL INDIAN NATIONALS

JIMMY SORAB CANTEENWALLA

INVENTORS

APPLICATION NO : 310 BOM 1997 FILED ON 19.05.1997 PATENT OF ADDITION TO : 17 BOM 96 DATED 10.01.1996 APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4, PATENTS RULES 1972 ) , PATENT OFFICE BRANCH , MUMBAI - 13 .

11 CLAIMS

An improved seal comprises of a box open at its one end atleast one ' U" ring bracket provided integrally or otherwise fixed to an inside wall of the said box , the opening of the said ' U' ring bracket being co- axial to the open end of the said box, a short projecting spike provided below the said ' U' ring bracket; a plate slidably provided inside the said box and an arrow/anchor shaped insert having a shaft/stem in the middle and flukes on its both sides , the said flukes in the spreaded form having a span greater then the opening of the said ' U ' ring bracket of the said box, the said shaft/ stem of the insert being bisected by an elongated slit one or more hole ( s) being provided in the shaft/ stem of the said insert above the said slit , the said projecting spike provided below the said ' U' ring bracket of the box penetrating into the said slit on fully inserting the said arrow/anchor shaped insert into the said box.

023720

12A

FIG- 16

p23720

Drawings : 01 sheets

Comp.specn . 17 pages 1123 THE GAZETTE OF INDIA , MARCH 29 , 2003 ( CHAITRA 8, 1925 )

PART III-SEC . 2]

189552 :

189 [ LXVI (9 ) ]

IND . CL .

A 61 K 7/48

INT . CL .

TITLE

A PROCESS FOR PREPARING A SKIN CONDITIONING COMPOSITION CONTAINING RETINOL AND A RETINYL ESTER .

HINDUSTAN LEVER LIMITED ,

APPLICANT

HINDUSTAN LEVER HOUSE, 165/166, BACKBAY RECLAMATION, BOMBAY 400 020 , MAHARASHTRA,

INDIA , AN INDIAN COMPANY .

1. STEWART PATON GRANGER

INVENTOR( S)

2. ANTHONY VINCENT RAWLINGS

3. IAN RICHARD SCOTT

226 BOM 1997 FILED ON : 15.04.97

APPLICATION NO :

PRIORITY NO . 08/638074 DATED 25.04.96 OF U.S.A

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES 1972) , PATENT OFFICE BRANCH , MUMBAI - 13 .

06 CLAIMS

A process for preparing skin conditioning composition comprising:

(a) mixing 0.001 % to about 10 % of a compound selected from the group consisting of retinol and a retinyl ester ;

(b) 0.0001 % to about 50% of an azole ;

(d) a cosmetically acceptable vehicle .

Drawings Nil Sheets .

Complete Specification : 36 Pages ;

[PART III - SEC. 2 1124

THE GAZETTE OF INDIA , MARCH 29 , 2003 ( CHAITRA 8 , 1925)

189553

IND . L. : 98 E [ VIH (2 ) ]

F 24 H - 7/04

INT . CL .

: AN IMPROVED HEAT TRANSFER EQUIPMENT /SYSTEM TITLE

APPLICANT : THERMAX LIMITED , D - 13 , MIDC INDUSTRIAL AREA , CHINCHWAD , PUNE 411 019 , MAHARASHTRA , INDIA , AN INDIAN COMPANY

INVENTORS

(1)

DR.NARENDRA DATTATRAYA JOSHI

(2)

DILIP WAMAN BAPAT

(3)

ALTEN CARMO LOBO

(4)

SAMIR VASUDEO KULKARNI

(5)

CHARLES PHILOMINRAJ

261/BOM/ 1997 FILED ON 28.04.1997

APPLICATION NO :

Complete specification filed after provisional specification on: 23.07.1998

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES 1972 ) , PATENT OFFICE BRANCH , MUMBAI - 13.

06 CLAIMS

A system for transferring and recovering heat from products of combustion ( flue gases) of a fuel in radiant and two stage convection section comprising in combination

fuel burner assembly operably connected upstream to a turbo charger/turbo compressor.

ii ) said turbo charger/turbo compressor being provided with a start up mechanism

said fuel burner assembly operably connected down stream to a heat transfer and recovery system having one or more. preferably two heat exchangers of the convective heat exchange type and an exhaust or stack for the exit of spent flue gases .

iv) saidstart up device comprising an air eductor assembly , external air supply feed line. an external fuel supply source, a liquid/gaseous fuel burner and a mixing charnber assembly operably connecting said start up device to said turbo charger /turbo compressor and said heat recovery system and

v) said fuel burner assembly comprising a pilot burner , an ignition source such as an ignition transformer, a turbo compressed air inlet duct.a primary housing accommodating a burner rod and nozzle assembly and a secondary housing made of a combustion chamber having upsteam secondary air mixing assembly and an air diffuser assembly.

Drawings : Nil

Prov.specn . 04 pages

Drawings : 3 sheets

Comp.speen.23 pages .

1125 THE GAZETTE OF INDIA , MARCH 29, 2003 ( CHAITRA 8 , 1925 )

PART III- SEC . 2 )

189554

77 B (2) XI

IND . CL.

В 30В 9/00; 9/02

INT . CL .

TITLE

: A METHOD AND APPARATUS FOR SEPARATING OF TWO LIQUIDS OF DIFFERENT DENSITIES BY GRAVITY OBTAINED IN A LIQUID - LIQUID EXTRACTION.

APPLICANT

OUTOKUMPU TECHNOLOGY ΟΥ , RIIHITONTUNTIE 7, FIN - 02200 ESPOO, FINLAND , A FINNISH CO .

1. BROR NYΜΑΝ .

INVENTORS

2. LAUNO LILJA ,

3. STIG - ERIK HULTHOLM,

4. JUHANI LYYRA,

5. RAIMO KUUSISTO ,

6. PETRI TAIPALE ,

7. TIMO SAARENPAA ,

FILED ON : 29-04-1997

268/BOM/ 1997

APPLICATION NO .

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RIJLE 4 , PATENTS RULES 1972) , PATENT OFFICE BRANCH , MUMBAI 13 .

06 CLAIMS

Amethod for separating of two liquids of different densities by gravity obtained in a liquid- liquid extraction process which comprises (a) introducing a dispersion of said liquids by allowing same to flow into a feeding end of a settler ; (b ) adjusting the flow speed of the lighter liquid through a settler so that it is greater than that of the heavier liquid ; (c) preventing flow turbulence at the border of the two liquids caused by said differing flow speeds by providing a heavier liquid drop dispersion layer between the two liquids extending along said border of said liquids until a discharge point of said settler ; (d) passing said dispersion of liquids and settled liquids through at least three picket fences each of which forms a restricted transverse surface; (e) turning liquid flow at the first picket fence in a longitudinal direction of the settler; (f) allowing settled heavier liquid to flow freely in the bottom of the settler at the next picket fence; and (g ) recovering separated liquid.

00000000000

ष

Drawings : 04 Sheets

Complete specification: 17 pages ,

2-517G1/2002 1126

THE GAZETTE OF INDIA , MARCH 29 , 2003 ( CHAITRA 8. 1925)

[ PART III-SEC . 2 IND . CL .

189 VI (9)

189555 INT . CL .

A 61 K 7/00, 7/48

TITLE

A SKIN TREATMENT COMPOSITION

APPLICANT

HINDUSTAN LEVER LIMITED , HINDUSTAN LEVER HOUSE , 165/166, BACKBAY RECLAMATION , BOMBAY 400 020 , MAHARASHTRA , INDIA , AN INDIAN COMPANY .

INVENTOR( S) :

1. BRIAN JOHN DOBKOWSKI

2. ALEXANDER PAUL ZNAIDEN

3. MICHAEL CHARLES CHENEY

4. WALTER ROSE

APPLICATION NO :

364/BOM/ 1997 FILED ON : 19.06.97

PRIORITY NO . 60/020,745 DATED 28.06.96 OF U.S.A

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES 1972), PATENT OFFICE BRANCH. MUMBAI - 13 .

06 CLAIMS

Askin treatment composition comprising :

(i) from 0.1 to 30% of a crosslinked non - emulsifying siloxane elastomer ;

(ii) from 10 to 80% of a volatile siloxane ; and

(iii) from 50 to 85% by weight of water.

Complete Specification : 18 Pages :

Drawings NIL Sheets .

1127 THE GAZETTE OF INDIA , MARCH 29 , 2003 ( CHAITRA 8 , 1925)

PART III-SEC . 2]

189556

: 170D

IND . CL .

: C 11 D - 1 / 00,1 /32

INT . CL.

TITLE

A PROCESS FOR MANUFACTURE OF A

DETERGENT COMPOSITION

APPLICANT

HINDUSTAN LEVER LIMITED , HINDUSTAN LEVER HOUSE , 165/166 BACKBAY RECLAMATION, MUMBAI 400 020 , MAHARASHTRA , INDIA . AN INDIAN COMPANY.

1. CHRISTOPHER CLARKSON JONES

INVENTORS

2. AMANDA PERRY

APPLICATION NO : 379/BOM/ 1997 FILED ON 25.06.1997 Priority No.9613758.3 dated 01.07.1996 of GB .

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4 , PATENTS RULES 1972), PATENT OFFICE BRANCH, MUMBAI - 13.

12 CLAIMS

A process for manufacture of detergent composition comprising a surfactant and selectively providing a peptide or protein Deposition Aid having a high affinity for fibres / fabrics or any surface thereof and a benefit agent attached/adsorbed to the peptide or protein including enzymes Deposition Aid directly or via a linking group.

Drawings NIL

Comp.specn . 33 pages ,

tg 1128

THE GAZETTE OF INDIA , MARCH 29 , 2003 ( CHAITRA 8. 1925)

[PART III-SEC. 2 IND . CL

189557

147 C [ LX( 3) ]

INT . CL .

F 16 D 59/00

TITLE

SAFETY BRAKE ASSEMBLY .

APPLICANTS

CHR . MAYR GMBH & CO .

KG , EICHENSTRABE 1 , 87665 MAUERSTETTEN , FEDERAL REPUBLIC OF GERMANY .

INVENTORS

1. CHRISTOPH DROPMANN

2. KARL SCHILLING

APPLICATION NO . 393/BOM/1997

FILED ON : 02/07/1997 PRIORITY ΝΟ . 296 11 732.3 FILED ON 05/07/1996 OF FEDERAL REPUBLIC OF GERMANY .

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS RULE 4 , PATENTS RULES 1972) , PATENT OFFICE BRANCH , MUMBAI 13.

16 CLAIMS .

12 17 8 24

A safety brake assembly preferably for elevators and lifts which provides a braking effect between a housing and two brake discs (2.11 ) which rotate with respect to the housing comprising :

10.

the housing, having two friction surfaces (4.9) facing each other and held apart by one or more spacing rods , each carrying a bush ( 8) :

the two brake discs disposed inwardly from the friction surfaces (4,9) of the housing:

-22 an electromagnet assembly with armature disk (3 ) between said two brake discs (2.11 ) and having, two outwardly facing friction surfaces , resilient means (7) to urge the outwardly facing friction surfaces apart and into frictional engagement with the two brake discs (2,11 ) and the electromagnets ( 6) of said electromagnet assembly to pull the friction surfaces together and out of engagement with the two brake discs ( 2.11 ) ; the brake discs (2,11 ) being free to move in an axial direction; the electromagnet assembly being floatingly disposed between the two brake discs thereby allowing its free movement in the said axial direction, the said electromagnetic assembly being constrained against rotational movement by the one or more spacing rods .

Complete Specification : 19 Pages ;

Drawings 05 Sheet .

1129 THE GAZETTE OF INDIA , MARCH 29 , 2003 ( CHAITRA 8 , 1925)

PART III-SEC . 2 ]

189558 : 136 [ XIII ]

IND . CL .

: B 65 D, B 29 C

INT . CL .

TITLE

DRUM LIKE CONTAINER MADE OF PLASTIC AS WELL AS THE PROCESS AND EQUIPMENT FOR IT'S MANUFACTURE/ PRODUCTS .

APPLICANT

DIPL . - ING. GUNTER RICHTER, JOHANNISTAL 12, D- 57610 ALTENKIRCHEN, GERMANY .

-IDEM-

INVENTORS

APPLICATION NO : 455 /BOM/ 1997 FILED ON 29.07.1997 Priority No. 196 35 334.3 dated 31.08.1996 of GERMANY APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4 , PATENTS RULES 1972 ) , PATENT OFFICE BRANCH, MUMBAI - 13.

10 CLAIMS

Drum - like container consisting of a discontinuously extruded tube - like perform made of a thermoplastic plastic , in the blow moulding process , with a wall with an inner layer, an outer layer and at least one intermediate layer , characterized by the fact that the walls show a visible strip (2) made of translucent plastic which stretches in an axial direction. 9 13 13a 5 10

140

120

Comp.specn . 10 pages , Drgs . 1 sheet

-B

FIG.2 1130

THE GAZETTE OF INDIA , MARCH 29, 2003 ( CHAITRA 8 , 1925)

[PART III-SEC. 2 IND . CL .

123 I(4)

189559 INT . CL .

A 01 N 25/00 C 05 B 7/00

TITLE

A FERTILIZER COMPOSITION AND METHOD OF PREPARING THE SAME .

APPLICANT

MAX - PLANCK- GESELLSCHAFT ZUR FORDERUNG DER WISSENSCHAFTEN.

E.V. BERLIN , GERMANY , GERMAN COMPANY .

INVENTOR ( S) :

1. PROFESSOR AJIT VARMA

2. DR . PHILIPP FRANKEN

APPLICATION NO :

702/BOM / 1997 FILED ON : 05.12.97

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4, PATENTS RULES 1972) , PATENT OFFICE BRANCH, MUMBAI - 13 .

03 CLAIMS

A fertilizer composition comprising mixing in an aqueous solution or suspension the following ingredients :

a) 0.1 % to 80% by weight of fungi of genus Piriformospora DSM No. 11827 .

b ) 0.01 % to 25% by weight of 2- chloroethane phosphoric acid or ester or salt thereof:

and

c) 1 to 20% by mass of urea,

in a total amount of 1-95% by weight in admixture with additives suitable for floatation and/or dispersion of the solid phase and wetting agents .

194

FIG . 1

FIG . 2

Complete Specification : 44 Pages ;

Drawings 10 Sheets .

1131 THE GAZETTE OF INDIA , MARCH 29 , 2003 ( CHAITRA 8 , 1925)

PART III-SEC . 2].

189560

32F 2 a

IND. CL .

C 07 D 277/32

INT. CL.

213/61

405/06

417/14

TITLE

PROCESS FOR THE PREPARATION OF 1,3- DISUBSTITUTED 2 - NITROGUANIDINES .

: BAYER AKTIENGESELLSCHAFT ,

APPLICANT

D- 51368 LEVERKUSEN , GERMANY .

: 1. ΚΑΙ VAN LAAK.

INVENTORS

2. WOLFRAM SIRGES .

3. DETLEF WOLLWEBER .

FILED ON : 29-11-2000.

1081 MUM 2000

APPLICATION NO . :

PRIORITY NO . 199 61 604-3 DATED 21.12.99 OF GERMANY.

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES 1972 ) , PATENT OFFICE BRANCH, MUMBΑΙ 13 .

07 CLAIMS

1. Process for the preparation of 1 , 3 - disubstituted 2 -nitroguanidines of the formula (I)

Het-CH- NH

C=N-NO₂ ( 1)

R-NH

inwhich

R¹ is hydrogen or alkyl ,

R² is hydrogen , alkyl , cycloalkyl or – CH2R³ ,

R³ is alkenyl , alkinyl or aryl or heteroaryl each of which is optionally substituted ,

Het is an unsubstituted or substituted aromatic or non- aromatic , monocyclic or bicyclic heterocyclic radical , 1132

THE GAZETTE OF INDIA , MARCH 29 , 2003 ( CHAITRA 8 , 1925 )

[PART III-SEC . 2 Charaterized in that a compound of the formula (II )

R-CH -Het

R-N

(11)

N - NO₂

inwhich

R' , R² and Het are as defined above , and

R¹ is alkýl , cycloalkyl , aryl , arylalkyl or heterocyclylalkyl , each of which may be unsubstituted or substituted ,

is reacted

with anhydrous hydrogen chloride in the presence or absence of a diluent

or with one or more compounds which can generate hydrogen chloride with protic solvents , in particular with alcohols or carboxylic acids , where the hydrogen chloride generating compounds are selected from

a) GroupA: compounds of formula ( III)

(III)

inwhich

R' is alkyl , cycloalkyl , aryl , arylalkyl or heterocyclyalkyl , each of which may be substituted , and

b) Group B: reactive nonmetal and metal chlorides , and reactive nonmetal and metal oxychlorides.

Complete specification : 31 pages ,

Drawings : Nil Sheets 1133 THE GAZETTE OF INDIA . MARCH 29 , 2003 ( CHAITRA 8 , 1925)

PART IN SEC . 2]

189561 :

128G [XIX (2) ]

IND . CL

INT . CL .

A61 M 5/32 B 65 D 85/24

A SHARPS DISPOSAL SYSTEM

TITLE

BIO - PLEXUS , INC. ,

APPLICANTS

384 MERROW ROAD , TOLLAND, CONNECTICUT 06084 , UNITED STATES OF AMERICA .

INVENTORS

1. DOUGLAS A. RACICOT,

2. PHILIP S. KINSEY,

3. RICHARD G. HOLDAWAY ,

4. GARY L. EDMOND ,

5. GREGORY F. BIANCARDI

FILED ON : 28/05/1997

APPLICATION NO . 328 /BOM/ 1997

U.S. CONVENTION PRIORITY NO . 08/670 , 270 FILED JUNE 21 , 1996 .

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS RULE 4 , PATENTS RULES 1972 ) , PATENT OFFICE BRANCH, MUMBAI - 13 .

36 CLAIMS .

1) Asharps disposal system comprising:

a holder , said holder including movable actuator means for detachably mounting a hub to said holder; and

a sharps receptacle having a generally hollow base with an open end arıd a generally rigid cover for closing said open end of said base , said cover having a hub passage aperture sized and shaped to permit passage of a hub into the interior of the receptacle , said cover also having a release structure which aligns said holder with said aperture and which engages said actuator means or said holder , said release structure operating said actuator means to cause detachment of a mounted hub from said holder , said release structure extending upwardly from said cover and being in spaced relationship to said aperture in said cover such that a na detached from said holder by- operation of said release structure will pass into said sharps receptacle as a result of placement of said holder into engagement with said release structure .

1-00

FIG. 1

Drawings 6 Sheets

Complete Specification : 42 Pages ;

3-517 GI/2002 1134

THE GAZETTE OF INDIA , MARCH 29 , 2003 ( CHAITRA 8. 1925)

[PART III SEC. 2

189562

IND . CL .

55 ( A) [XIV( 3 ) ]

INT . CL .

A 61 K 7/00;

7/32

TITLE

A COSMETIC ANTIPERSPIRANT COMPOSITION INTENED FOR COOLING SKIN .

: HINDUSTAN LEVER LTD .

APPLICANT

HINDUSTAN LEVER HOUSE,

165/166 BACKBAY RECLAMATION ,

MUMBAI - 400 020,

MAHARASHTRA , INDIA .

INVENTORS

1 .

VERNON PETER JOHN MARTI

2. JOHN TEMPLE .

348/BOM/ 1997

FILED ON : 09-06-1997

APPLICATION NO . :

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES 1972) , PATENT OFFICE BRANCH , MUMBΑΙ 13 .

08 CLAIMS

A cosmetic antiperspirant composition intended for cooling skin comprising 0.1 to 20% by weight of known antiperspirant active , as herein described , 3.5 to 90% by weight of a liquefied volatile propellant, such as herein described, and 1 to 30%by weight of a volatile cyclomethicone liquid carrier which further contains a retardant of the volatilization of the propellant, that is 0.05 to 6% by weight of silicone polymer or a silicone fluid having a viscosity of greater than 60000 centistokes.

Complete specification: 21 pages ,

Drawings : 01 Sheets 1135 THE GAZETTE OF INDIA , MARCH 29 , 2003 ( CHAITRA 8. 1925 )

PART III-SEC . 2]

IND . CL

32F 3 B

189563 INT. CL .

C 07 C 53/00;

53/19

TITLE

A PROCESS FOR THE PREPARATION OF MONOESTERS OF ALIPHATIC SATURATED OR UNSATURATED, STRAIGHT OR BRANCHED CHAIN .

APPLICANTS

HINDUSTAN LEVER LIMITED ,

HINDUSTAN LEVER HOUSE,

165-166 , ВАСKBAY RECLAMATION

MUMBAI : 400 020 .

MAHARASHTRA ,

INDIA .

INVENTORS

1. CHRISTINE DAVIES .

2. ALASDAIR ROBIN MACRAE

349/BOM/ 1997

APPLICATION NO .:

FILED ON : 09/06/1997

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS RULE 4, PATENTS RULES 1972 ) , PATENT OFFICE BRANCH, MUMBAI - 13 .

10 CLAIMS .

1. A process for the preparation of a mono-ester of aliphatic, saturated or unsaturated, straight or branched chain, C2 - C24 monocarboxylic acid and a polyhydric alcohol which comprises contacting the acid and alcohol , in the presence of an enzyme , the improvement wherein the enzyme is potato lipid acyl hydrolase whereby the mono- ester is formed with a minimum formation of di - or higher- ester.

Complete Specification : 15 Pages ;

Drawings 02 Sheet .

[PART III SEC. 2 THE GAZETTE OF INDIA , MARCH 29 , 2003 (CHAITRA 8 , 1925 )

1136

189564 :

IND . CL .

25 A [ XXV ( 1 ) ] , 25 B [ XXV ( 1 ) ]

INT . CL.

В 32 B - 7 /00 ;31/00 , E 04 F - 15/00 ; 15/10

TITLE

A FLEXIBLE FLOOR COVERING TILES AND A PROCESS OF MANUFACTURING THE SAME .

APPLICANT

DLW AKTIENGESELLSCHAFT, 74319 BIETIGHEIMBISSINGEN , GERMANY

HANS - DIETER VIELUF

INVENTORS :

APPLICATION NO :

429/BOM / 1997 FILED ON 16.07.1997

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES 1972 ) , PATENT OFFICE BRANCH , MUMBAI - 13 .

13 CLAIMS

A flexible floor covering tile , comprising at least one upper and at least one lower service layer and a carrier arranged between service layers , wherein the at least one upper and the at least one lower service layers are linoleum service layers and wherein at least one auxiliary layer is arranged between the carrier and the service layers , the auxiliary layer(s ) is /are a heat insulating layer and/or layer for solid borne sound insulation .

Drawings :Nil

Comp.specn .: 19 pages .

1137 PART III-SEC . 2]

THE GAZETTE OF INDIA , MARCH 29 , 2003 ( CHAITRA 8 , 1925 )

189565 :

IND . CL .

141 E [XXXIII ( 8 ) ]

B 22F 3/10

INT . CL .

TITLE

AN IMPROVED SYNCHRONIZER RING FOR GEAR TRANSMISSION .

APPLICANT

NIPPON PISTON RING CO . , LTD . ,

2-6 , KUDAN -KITA

4 - CHOME , CHIYODA - KU , TOKYO 102 , JAPAN , JAPANESE CO .

1. YOSHIKATSU NAKAMURA

INVENTORS

2. TETSUO MASUYAMA

21-07-1997

FILED ON :

436 BOM 1997

APPLICATION NO .

DATED 30-08-1996 OF JAPAN PRIORITY ΝΟ . 8-230208

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4 , PATENTS RULES 1972 ) , PATENT OFFICE BRANCH , MUMBAI 13 .

09 CLAIMS

An improved synchronizer ring, made of Fe -based sintered alloy , having an internal circumferential surface , said internal circumferential surface being adapted to detachably engage in synchronized sliding with a rotating counterpart member thereof, wherein said internal circumferential surface being applied with aqueous vapor treatment to form iron oxide film therein .

100

103

104

102

101

103

104

FIG .

Drawings : 03 Sheets Complete specification : 17 pages , [PART III-SEC . 2 1138

THE GAZETTE OF INDIA , MARCH 29, 2003 ( CHAITRA 8 , 1925)

189566

55F

IND . CL

A 61 K 31/07

INT . CL .

TITLE

A PROCESS FOR THE PREPARATION OF A COSMETIC OIL - IN - WATER EMULSION

HINDUSTAN LEVER LIMITED ,

APPLICANTS

HINDUSTAN LEVER HOUSE ,

165-166, BACKBAY RECLAMATION

MUMBAI : 400 020.

MAHARASHTRA ,

INDIA.

1. STEPHAN SAMUEL HABIF

INVENTORS

2. JOHN BRIAN BARTOLONE

3. DENNIS BRIAN SINFIELD

4. FALGUNI SNEHAL NANAVATY.

FILED ON : 12/08/1997

APPLICATION NO . 479/BOM/ 1997

PRIORITY NO . 08/706, 009 FILED ON 30/08/1996 OF U.S.A.

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS RULE 4 , PATENTS RULES 1972 ) , PATENT OFFICE BRANCH, MUMBAI - 13 .

07 CLAIMS.

Aprocess for the preparation of a cosmetic oil - in- water emulsion comprising mixing :

(i )

a cosmetic benefit ingredient selected from the group consisting ofa hydroxy acid , retinol , retinoic acid, retinal , C2- C5 retinyl ester and mixtures thereof;

(ii) borage seed oil in an amount in an amount of from 0.05 to 10 wt.%; and

at least 50% water .

(iii)

Drawings Nil Sheet.

28 Pages ;

Complete Specification :

1139 THE GAZETTE OF INDIA , MARCH 29 , 2003 ( CHAITRA 8 , 1925 )

PART III- SEC . 2]

189567

55 F

IND . CL .

A61 K - 31/07

INT . CL .

TITLE

A METHOD OF MAKING A STABLE OIL IN

WATER EMULSION

APPLICANT

HINDUSTAN LEVER LIMITED , HINDUSTAN LEVER HOUSE , 165/166, BACKBAY RECLAMATION , MUMBAI 400 020 , MAHARASHTRA , INDIA . AN INDIAN COMPANY .

(1)

STEPHAN SAMUEL HABIF

INVENTORS

(2) ALEXANDER LIPS

(3) PREM CHANDAR

MARK EDWARD REREK

(4)

487 BOM 1997 FILED ON 18.08.1997

APPLICATION NO :

Priority No. 08 /717,046 dated 20.09.1996 of U.S.A.

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES 1972 ) , PATENT OFFICE BRANCH, MUMBAI - 13 .

07 CLAIMS

Amethod of making a stable oil in water emulsion comprising:

(1 ) preparing an aqueous phase and heating at temperature in the range of from about 75 ° C , to about 80 ° C, while mixing;

(2) preparing a mixture containing a fluid oil and barrier ingredient components and heating the mixture to a temperature in the range of from about 75 ° C, to about 80 ° C , while mixing;

(3) adding slowly the mixture of step (2 ) to the aqueous phase ;

(4) mixing the mixture obtained in step (3 ) for at least 15 minutes at a temperature in the range of from 75 ° C to about 80 ° C ;

(5) adding a retinoid after cooling the mixture obtained in step (4) to a temperature in the range of from about 50° C to about 55° C , while mixing ;

(6) filling in storage containers,

and optionally adding a hydroxy acid, after step 4, at a temperature in the range of from about 50° C, to about 60° C,

Drawings : Nil

Comp.specn.: 50 pages 1140

THE GAZETTE OF INDIA , MARCH 29 , 2003 ( CHAITRA 8 , 1925 )

[PART III-SEC . 2 :

189568 IND . CL .

22 [XL( 2) ]

B 65 D 1/00

INT . CL .

TITLE

AN IMPROVED PLASTIC CONTAINER .

APPLICANT

PRASHANT NISHIKANT JOSHI

DAILY SAGAR, BOMBAY GOA

ROAD , CHIPLUN RATNAGIRI , MAHARASHTRA , INDIA ,

INDIAN NATIONAL .

IDEM

INVENTOR ( S) :

APPLICATION NO :

499/BOM/ 1997 FILED ON : 26.08.97

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES 1972) , PATENT OFFICE BRANCH , MUMBAI – 13 .

01 CLAIMS

An improved plastic container having an enlarged body with an inbuilt handle at the top and a spout at the top corner closeable by a cap; the opening of the spout being bifurcated into two compartments forming a bigger opening , at the extreme top corner for filling and dispensing liquid and a smaller opening for air vent the said smaller opening being connected to an inbuilt tubing provided below the handle and emerging out at the other end of the body at its top portion.

FIG . 3

Drawings 01 Sheets .

Complete Specification: 07 Pages ;

1141 THE GAZETTE OF INDIA , MARCH 29, 2003 ( CHAITRA 8. 1925 )

PART III -SEC . 2]

189569 143 D 4

IND . CL

B 65D

INT. CL .

1/00,1/30

SPACING DEVICE FOR SPREADING STAMPED MATERIAL .

TITLE

HINDUSTAN LEVER LIMITED,

APPLICANTS

HINDUSTAN LEVER HOUSE ,

165-166, BACKBAY RECLAMATION

MUMBAI : 400 020.

MAHARASHTRA,

INDIA

1. DANIEL JOHN HEINZ

INVENTORS

2. OLIVER KLEIN

3. MARIO PETER NEUHOF

4. HANS - JUERGEN SOLERT

5. KEVIN JOHN STAMP .

FILED ON : 27/08/1997

APPLICATION NO .: 500 /BOM/ 1997

PRIORITY NO .: 19634867.6 FILED ON : 28/08/1996 OF DE - GERMANY

FILED ON : 12/09/1996 OF DE - GERMANY

PRIORITY NO .: 19637184.8

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS RULE 4 , PATENTS RULES 1972 ) , PATENT OFFICE BRANCH , MUMBAI - 13 .

10 CLAIMS .

1) A spacing device for spreading stamped material during transfer from a stamping means to packaging line , the device comprising:

atrain of at least a first carriage and a last carriage, each carriage being mounted for. movement along an axis , the carriages being coupled together to allow spacing therebetween upon movement of one of the carriages ; and

driving means which when operated moves the first carriage in a direction along the axis;

actuating means which includes a pivotable lever with a first end , a second end , and a pivot axis therebetween , said pivot axis being situated between the first and the last carriage on the longitudinal axis of a carriage train , said first end being pivotally linked to the first carriages through a single pivotable linkage , said second end being pivotally linked to the last carriage through a single pivotable linkage ;

wherein the driving means is a single driving means and the first carriages or the single driving means is operatively connected to an actuating means such that when the driving means moves the first carriage along the axis , the actuating means moves the last carriage along the axis in the direction opposite to the direction of movement of the first carriage thereby spacing the train of carriage apart .

Fig.1.

Fig.2.

Fig.3.

Drawings 03 Sheet .

Complete Specification : 15 Pages ;

4-517 G1/2002 1142

THE GAZETTE OF INDIA , MARCH 29 , 2003 ( CHAITRA 8 , 1925)

[PART III-SEC . 2 IND . CL.

189570

E 03 D , 1/00 , 1/30

INT . CL

: 45G(3)

TITLE

A SLIDE VALVE WITH MONOBLOCK CASING.

APPLICANT

WECO ARMATUREN GMBH

ELSENROTHER STRABE ,

51 , 51588 , NUMBRECHT, GERMANY .

INVENTOR ( S) :

GUMTER WEHR

APPLICATION NO :

509/BOM/ 1997 FILED ON : 01.09.1997

PRIORITY NO . 29611546.0 DATED 04.07.96 OF Germany .

PRIORITY NO . 19706575.9 DATED 20.02.97 OF Germany .

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4, PATENTS RULES 1972), PATENT OFFICE BRANCH , MUMBAI - 13 .

08 CLAIMS

Aslide valve for the installation in piping for liquid and gaseous media as well as for free- flowing granulous and powdery materials, with a casing which is composed of two casing elements ( 1,2 ; 51,52 ) which are each provided with a pass - through opening ( 11,12; 61,62) and are mutually connected by connecting means , and with a slider plate (3 , 53 ) which is guided between the two casing elements ( 1,2 ; 51,52) and is connected with a spindle (5,55) for slidingly controlling the slider plate between an opened and closed position for the pass - through opening of the causing and with sealing means which are inserted in the casing, enclose the pass - through opening of the casing in a sealing ring and have a sealing contact with respect to the slider plate (3 ) at least in the closed position of the slider plate, characterized in that the first casing element ( 1,51 ) forms a slider bed ( 13,63 ) for the slider plate ( 3,53 ), which encompassed the pass- through opening ( 11,61) of the first casing element and which receives the slider plate in the closed position of the slider plate, that the second casing element (2,52 ) is arranged as an annular lid which encompasses the pass - through opening ( 12,62 ) of the second casing element and occludes the slider bed (13 , 63 ) , that the first casing element ( 1 , 51 ) comprises a slider chamber (15,65) which is adjacent to the slider bed ( 13 , 63 ) , encloses the slider plate (3,53 ) completely in the opened position of the slider plate and beyond this is provided with a pass -through opening ( 16 , 66) for a shaft (6, 56) actuated by the spindle ( 5 , 55 ) and that the slider plate (3 , 53 ) is insertable into the slider chamber ( 15 , 65) exclusively through of the slider bed ( 13,63 ) .

FIO.1

Complete Specification : 19 Pages ;

FIO.2

Drawings 07 Sheets .

1143 THE GAZETTE OF INDIA , MARCH 29, 2003 ( CHAITRA 8. 1925 )

PART III- SEC . 2]

189571

IND . CL .

170 B + D [ XLIII ( 4 ) ]

C 11 D- 11/ 00

INT . CL .

TITLE

A PROCESS FOR PREPARATION OF A GRANULAR DETERGENT COMPOSITION .

APPLICANT

HINDUSTAN LEVER LIMITED , HINDUSTAN LEVER HOUSE , 165/166, BACKBAY RECLAMATION , MUMBAI 400 020 , MAHARASHTRA, INDIA . AN INDIAN COMPANY.

ANSHU MALI GUPTA

INVENTORS

APPLICATION NO : 513 BOM 1997 FILED ON 04.09.1997 Priority No.9618877.6 dated 10.09.1996 of G.B. United Kingdom .

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES 1972 ) , PATENT OFFICE BRANCH , MUMBAI - 13 .

12 CLAIMS

Aprocess for preparation of a granular detergent composition which process comprises the steps of

(i)

forming a liquid feedstock comprising a liquid binder containing

a nonionic surfactant;

(a)

a surfactant ; and

(b)

(c) an acid precursor selected from the group consisting of a fatty acid precursor of a soap and an acid precursor of an anionic surfactant;

( ii) dosing the liquid feedstock and a solid component into a high- speed mixer/densifier , to form a granular detergent material and forming further structurant in situ in the high - speed mixer/densifier by reaction of the acid precursor with an alkali metal hydroxide solution;

(iii)

subsequently treating the granular detergent material in a moderate - speed granulator/densifier, whereby it is brought into or maintained in a deformable state ; and

drying and/or cooling the product of step (iii ) .

(iv)

Drawings Nil

Comp.specn . 20 pages 1144

THE GAZETTE OF INDIA , MARCH 29 , 2003 ( CHAITRA 8 , 1925 )

[PART III- SEC . 2

189572

170 A

IND . CL .

INT . CL .

C 11 D 17/00, 17/04

TITLE

DEVICE FOR HANDLING A PLASTIC MATERIAL AND THE PROCESS FOR PRODUCING SUCH A DEVICE .

APPLICANT

HINDUSTAN LEVER HOUSE , 165/166 BACKBAY

HINDUSTAN LEVER LTD.

RECLAMATION

MUMBAI - 400 020 , MAHARASHTRA , INDIA .

1. OLIVER KLEIN

INVENTORS

2. MARIO PETER NEUHOF

3. HANS - JUERGEN SOLERT

APPLICATION NO .

04-09-1997

FILED ON :

514 /BOM| 1997

PRIORITY NO . 9619139.0

DATED 13-09-1996 OF GB - UK.

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES 1972 ) , PATENT OFFICE BRANCH , MUMBAI 13 ..

04 CLAIMS

A device for stamping a plastic material to produce shaped articles comprising a contact surface for contacting the plastic material , the contact surface having an elastomeric layer comprising at least two elastomeric coatings , said at least two elastomeric coatings being of different properties wherein the outer elastomeric coating such as herein defined provides a desired release property and the underlying elastomeric coating such as herein defined provides a desired adhesive property.

Complete specification: 20 pages ,

Drawings : 01 Sheets 1145 THE GAZETTE OF INDIA , MARCH 29 , 2003 ( CHAITRA 8 , 1925 )

PART III- SEC . 2]

189573 :

IND . CL .

55 A [ XIX ( 1 ) ]

A 61 K 7/32

INT . CL .

TITLE

A PROCESS FOR PREPARING A TOPICAL COSMETIC COMPOSITION FOR TOPICAL APPLICATION TO THE HUMAN SKIN.

APPLICANT

HINDUSTAN LEVER LIMITED , HINDUSTAN LEVER HOUSE, 165/166 BACKBAY RECLAMATION , MUMBAI 400 020 , MAHARASHTRA , INDIA . AN INDIAN COMPANY.

INVENTORS

1. MICHAEL RICHARD LOWRY

2. GORDON ROBERT WIGHT

534/BOM/ 1997 FILED ON 12/09/1997 .

APPLICATION NO :

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES 1972 ) , PATENT OFFICE BRANCH, MUMBAI - 13 .

09 CLAIMS

Aprocess for preparing a topical cosmetic composition, for topical application to the human skin , comprising mixing a deodorant active material comprising a cosmetically acceptable polyhexamethylene biguanide salt , a cosmetically suitable vehicle comprising a short chain monohydric alcohol , and a non polar propellant composition having a Hildbrand Solubility Parameter of less than 14.5 Mpa, characterized in that the composition additionally comprises an effective amount of water and optionally comprises a polarity modifier .

Drawings: Nil Sheets.

Comp.specn . 18 pages 1146

THE GAZETTE OF INDIA , MARCH 29 , 2003 ( CHAITRA 8 , 1925)

[PART III-SEC . 2 IND . CL .

61 I

-189574 INT . CL .

F 26B 11/04

TITLE

AERATION - TYPE ROTARY DRYER

APPLICANT

: YAMATO SANKO MFG . CO. LTD. , 1-2, KYOBASHI 3 - CHOME , CHUO - KU, TOKYO 104 , JAPAN .

INVENTOR ( S) :

YUKIO YAMATO

APPLICATION NO :

535/BOM/ 1997 FILED ON : 12.09.1997

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES 1972) , PATENT OFFICE BRANCH, MUMBAI - 13 .

08 CLAIMS

An aeration- type rotary dryer comprising an inlet box ( 11 ), an outlet box ( 12) , a rotary cylinder ( 10) having inlet- side and outlet- side ends thereof air- tightly and rotatably fitted in said inlet and outlet boxes , a material - feeding device ( 14) attached to said inlet box, outlet and exhaust ports ( 15, 16) disposed respectively in said outlet box, an air duct (21 ) axially extending through said cylinder from said outlet box to said inlet box, a plurality of radial pipes (27) branched slant downward from said air duct and having outer ends thereof located near to an inner surface of said cylinder, an inlet partition (31 ) formed with a central circular opening (32) and fixed to the inner surface of said cylinder at the inlet-side and thereof, an outlet partition (33 ) formed with a circular opening ( 34 ) and fixed to the inner surface of said cylinder at the outlet- side end thereof, characterized in that said air duct is composed of a plurality of longitudinally , successively connected tubular members (22,23 ) , 24 ) each nearer to said inlet box being smaller in diameter than the other nearer to said outlet box .

FIG.1

Complete Specification : 16 Pages ;

Drawings 07 Sheets .

PART III-SEC . 2]

1147 THE GAZETTE OF INDIA, MARCH 29, 2003 ( CHAITRA 8 , 1925 )

189575 :

IND . CL .

32F 2 [ IX( 1 ) ]

INT . CL .

: C 07 C 87/28 ; C 07 C 147/12

TITLE

: A PROCESS FOR THE PREPARATION OF AMINO DI ( ALKYLARYL) PHOSPHORODITHIOATE

APPLICANT

INDIAN OIL CORPORATION LIMITED , (A GOVT . OF INDIA UNDERTAKING) , OF G- 9 , ALI YAVAR JUNG MARG , BANDRA ( EAST) , MUMBAI - 400 051 . MAHARASHTRA , INDIA .

INVENTORS

1. DEEPAK KUMAR TULI .

2. RAKESH SARIN .

3. MADAN MOHAN RAI .

4. AKHILESH KUMAR BHATNAGAR.

540/BOM/ 1997

APPLICATION NO .

16-09-1997 .

FILED ON :

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES 1972 ) , PATENT OFFICE BRANCH , MUMBAI 13 .

06 CLAIMS

A process for the preparation of amino di (alkylaryl ) phosphorodithioate for use as an additive in a lubricant composition comprising :

a ) reacting distilled cashewnut shell liquid ( CNSL) or hydrogenated distilled CSNL with 70-80% phosphorus pentasulfide mixed therewith for a period of preferably one hour under stirring at a temperature of 10-140° C to obtain CNSL phosphorodithioic acid ;

b) subjecting said CNSL phosphorodithioic acid to the step of condensation with amines so as to obtain said amino di ( alkyaryl ) phosphorodithioate .

Drawings : NIL Sheets

Complete specification: 15 pages , [PART III-SEC . 2 THE GAZETTE OF INDIA , MARCH 29 , 2003 ( CHAITRA 8 , 1925)

1148

189576 :

IND . CL

40 B [ IV( 1 ) ]

INT . CL .

B 01 J 37/00

TITLE :

A NOVEL CATALYST COMPOSITION

APPLICANTS :

INDIAN OIL CORPORATION LTD .

(A GOVT . OF INDIA UNDERTAKING )

G-9 - ALI YAVAR JUNG MARG,

BANDRA ( EAST) ,

MUMBAI : 400 051 ,

MAHARASHTRA , INDIA .

INVENTOR :

1 ) RAKESH SARIN

2) SABYASACHI SINHA RAY

3 ) DEEPAK KUMAR TULI

4) MADAN MOHAN RAI

5) SOBHAN GHOSH

6) AKHILESH KUMAR BHATNAGAR

FILED ON : 16/09/1997

541 /BOM/ 1997

APPLICATION NO . :

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS RULE 4 , PATENTS RULES 1972 ) , PATENT OFFICE BRANCH , MUMBAI - 13 .

6 CLAIMS .

1 A catalyst composition for use in oligomerisation of olefins contained in refinery distillate streams comprising an aluminium halide component and a catalyst component selected from an alkoxide of a metal belonging to group IV B of the period i.e. table and mixed with each other in the molar ratio of 100 : 1 to 4 : 1 respectively.

Complete Specification : 17 Pages;

Drawings Nil Sheet .

1149 THE GAZETTE OF INDIA , MARCH 29 , 2003 (CHAITRA 8 , 1925 )

PART III -SEC. 2 ]

189577

55E-2

IND . CL

A61K - 7/48

INT . CL .

TITLE

AND A RETINOL OR RETINYL ESTER . SKIN CARE COMPOSITIONSCONTAINING AN AMIDE :

APPLICANTS

HINDUSTAN LEVER LIMITED ,

HINDUSTAN LEVER HOUSE,

165-166 , BACKBAY RECLAMATION

MUMBAI : 400 020 .

MAHARASHTRA ,

INDIA

A COMPANY INCORPORATED UNDER THE INDIAN COMPANIES ACT, 1913 .

1. STEWART PATON GRANGER

INVENTORS

2. ANTHONY VINCENT RAWLINGS

3. IAN RICHARD SCOTT.

FILED ON : 24/09/1997.

548/BOM/ 1997

APPLICATION NO .:

PRIORITY NO .: 08/722539 FILED ON : 27/09/1996 OF U.S.

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS. RULE 4 , PATENTS RULES 1972 ) , PATENT OFFICE BRANCH , MUMBAI - 13 .

5.CLAIMS .

1 . A skin care composition comprising:

(a) From 0.001 % to 10% of a compound selected from the group consisting of retinol . retinyl ester and mixtures thereof;

( b) From 0.0001% to 50% of an N - substituted fatty acid amide of the following structure:

H₂C

HC- NH

C R2

H₂C

0 R3

alkyl or alkoxy having from 1 to 10 carbon atoms ;

Wherein R₁

alkyl or alkenyl having from 8 to 25 carbon atoms : ..

alkyl containing 1 to 5 carbon atoms , or a phosphate ester ;

( c ) a cosmetically acceptable vehicle.

Drawings Nil Sheet .

Complete Specification : 35 Pages ;

5-517 G1/2002 .1150

THE GAZETTE OF INDIA , MARCH 29, 2003 ( CHAITRA 8 , 1925)

[PART III-SEC. 2 IND . CL

55E2

189578 INT . CL .

A 61 K - 7/48

TITLE

SKIN CARE COMPOSITIONSCONTAINING AN ACID AND A RETINOID .

APPLICANTS

: HINDUSTAN LEVER LIMITED, HINDUSTAN LEVER HOUSE , 165-166, ВАСКBAY RECLAMATION MUMBAI : 400 020 . MAHARASHTRA , INDIA

AN INDIAN COMPANY

INVENTORS

1. STEWART PATON GRANGER

2. IAN RICHARD SCOTT .

APPLICATION NO .: 550/BOM/ 1997 FILED ON : 24/09/1997

PRIORITY NO .: 08/721878 FILED ON : 27/09/1996 OF U.S.

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS RULE 4 , PATENTS RULES 1972) , PATENT OFFICE BRANCH, MUMBAI - 13 .

4 CLAIMS .

1. A Skin conditioning composition comprising

(a) From 0.001% to 10% of a retinoid selected from the group consisting of retinol , retinyl ester and mixtures thereof;

(b) From 0.0001% to 50% of an acid selected from the group consisting of oleanolic acid, ursolic acid , and mixtures thereof; and

Complete Specification : 25 Pages ;

Drawings Nil Sheet .

1151 PART III-SEC . 2]

THE GAZETTE OF INDIA , MARCH 29 , 2003 ( CHAITRA 8 , 1925 )

IND . CL..

189579

26 [ XLIII ( 1 ) ]

A 46B 15/00

INT . CL .

B 25 G 3/04

REPLACEABLE HEAD TOOTHBRUSH .

TITLE

HINDUSTAN LEVER LTD .

APPLICANT

HINDUSTAN LEVER HOUSE , 165/166 BACKBAY

RECLAMATION

MUMBAI - 400 020 , MAHARASHTRA , INDIA.

1. DONALD RICHARD LAMOND

INVENTORS

2. BERT DAVIS HEINZELMAN

3. JOHN MOLDAUER

25-09-1997

FILED ON :

558 BOM 1997

APPLICATION NO .

DATED 27-09-1996 OF U.S.A. 1 ) 60/026845

PRIORITY NO .

DATED 20-05-1997 OF U.S.A. 2) 08/864874

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES 1972 ) , PATENT OFFICE BRANCH , MUMBAI 13 .

Fig.1.

10 CLAIMS

A brushhead for a toothbrush handle , said brushhead comprising:

i) a base:

ii) bristle tufts projecting from the base:

a neck extending lengthwise from the base ; and

iv) a coupling anchor for engaging a reusable handle , the neck having first and second ends with the coupling anchor terminating at the second end , wherein the coupling anchor comprises a body portion with a pair of outwardly flexible wings which are rectangular and connected to the body on only a single side of their rectangular shape and that the wings flair outwardly from the second end of the neck toward the bristle tufts .

Drawings : 03 Sheets Complete specification : 12 pages , 1152

THE GAZETTE OF INDIA , MARCH 29 , 2003 ( CHAITRA 8 , 1925)

[PART III-SEC. 2 IND . CL

85I , R[XXXI ]

189580

INT. CL .

F 27D 3/18

TITLE

A MULTIADJUSTABLE BURNER FOR FEEDING AND DIRECTING REACTION GAS AND SOLIDS INTO SMELTING FURNACE .

APPLICANTS :

OUTOKUMPU TECHNOLOGY ΟΥ,

RIIHITONTUNTIE 7, FIN - 02200 ESPOO ,

FINLAND,

A FINNISH CO.

INVENTORS

1. ISMO HOLMI

2. TUOMO JOKINEN

3. LAUNO LILJA

4. JUSSI SIPILA

5. PEKKA TUOKKOLA

6. VESA TOROLA

7. LASSE VALLI .

APPLICATION NO . 561 /ΒOM/ 1997 FILED ON : 25/09/1997

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS RULE 4, PATENTS RULES 1972) , PATENT OFFICE BRANCH , MUMBAI - 13 .

30 CLAIMS.

1) A method for producing metal by suspension smelting , in which the flow velocity of reaction gas and dispersion air of pulverous solid material is adjusted when feeding reaction gas and finely divided solids to a reaction shaft of a suspension smelting furnace for creating a controlled and adjustable suspension , where reaction gas is fed into the furnace from around a finely divided solid material flow, said solids being distributed with an orientation towards the reaction gas by means of dispersion air, wherein the flow velocity and discharge direction of the reaction gas to the reaction shaft are adjusted. steplessly by means of a specially shaped adjusting member moving vertically in a reaction gas channel and by means of a specially shaped cooling block surrounding the reaction gas channel and located on an arch of the reaction shaft, so that the velocity of the reaction gas is adjusted to be suitable, irrespective of the gas quantity, in a discharge orifice located at a bottom edge of the reaction shaft arch , from which orifice the gas is discharged into the reaction shaft and forms there a suspension with the pulverous solid material , and the dispersion air needed for dispersing said material is adjusted according to the supply of the pulverous solid material , wherein the adjusting member adjusting the cross -sectional area and orientation of the peaction gas flow is cooled, and wherein curved surfaces of the adjusting member and ofthe cooling block located on the side of the reaction gas channel are designed so as to reduce the cross- sectional flow area in the discharge direction of the reaction gas.

Complete Specification ; 23 Pages;

Drawings 04 Sheet .

1153 THE GAZETTE OF INDIA , MARCH 29, 2003 ( CHAITRA 8 , 1925 )

PART III-SEC . 2]

189581 :

IND . CL

26[XLIII ( 1 ) ]

A 46B 9/06

INT . CL .

A TOOTH BRUSH

TITLE

APPLICANTS

HINDUSTAN LEVER LIMITED ,

HINDUSTAN LEVER HOUSE ,

165-166, BACKBAY RECLAMATION

MUMBAI : 400 020.

MAHARASHTRA ,

INDIA .

1. SHASHANK VAMAN DHALEWANDIKAR INVENTORS

2. NAGESH KESHAV PAL ..

FILED ON : 03/10/1997

APPLICATION NO . 577/BOM/ 1997

COMPLETE SPECIFICATION FILED AFTER PROVISIONAL

SPECIFICATION ON : 05/10/1998

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS RULE 4 , PATENTS RULES 1972) , PATENT OFFICE BRANCH , MUMBAI - 13 .

29 CLAIMS .

1) Atoothbrush comprising

a bristle head having length of at least one and a half times its breath;

said bristle head being provided with a plurality of thermoplastic nonelastomeric bristles and thermoplastic elastomeric elements arranged in a plurality of rows constituted by at least one intermediate row and two outer rows on the elongated side of the bristle head;

said nonelastomeric bristles constitutes at least 7% of the tufts on the outer rows .

Figure Ib

Elevation

Figure la i

Drawings 06 Sheet .

Provisional Specification : 09 Pages ;

Drawings 06 Sheet .

Complete Specification : 14Pages;

1154

THE GAZETTE OF INDIA , MARCH 29 , 2003 ( CHAITRA 8 , 1925 ).

[PART III-SEC . 2.

IND . CL .

: 64 B1 [ LVIII ( 1 ) ]

189582

INT . CL .

: H 02 G - 15/02

TITLE

: AN IMPROVED CABLE TERMINAL.

APPLICANT

: SHAM RAMCHANDRA KULKARNI, BIPIN SHAM KULKARNI , PARTNERS OF KAY VYBIN CORPORATION OF E/ 5 PRASHANT CO - OP HSG.SOCIETY, 139 SENAPATI BAPAT MARG , MATUNGA, MUMBAI 400.016, MAHARASHTRA , INDIA . INDIANS .

INVENTORS

BIPIN SHAM KULKARNI

APPLICATION NO :

609 BOM 1997 FILED ON 15.10.1997

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES 1972 ) , PATENT OFFICE BRANCH , MUMBAI - 13 .

01 CLAIM

An improved cable terminal comprising a plurality of positive negative wires separated by rubber tubing or extruded rubber separator placed in an alternative polarity and grouped.separately each of the said group of wires being crimped and brazed to the inner surface of a terminal , the said wires being again crimped in an exclusively małe, female pattern and housed in a hose pipe adopted for passing there through chilled water .

FIG.4

Comp.specn . 07 pages .

Drawings : 03 sheets PART III - SEC . 2 ]

1155 THE GAZETTE OF INDIA , MARCH 29 , 2003 ( CHAITRA 8 , 1925)

189583

29 C + A

IND . CL .

: Η 03 Κ - 3/00

INT . CL .

TITLE

: AN EQUIPMENT FOR ENUMERATING DYNAMICALLY GROWING MICROBIAL POPULATION .

APPLICANT

V.M.BIOTECH , N - 22 , INDRANAGARI , DAHANUKAR COLONY , KOTHRUD , PUNE 411 029 , MAHARASHTRA , INDIA . AN INDIAN COMPANY

INVENTORS

VISHNUKUMAR MAHADEO KULKARNI (1)

DR.ABHAY SHENDYE

(2)

(3)

NITIN AGNIHOTRI

641 BOM 1997 FILED ON 03.11.1997

APPLICATION NO :

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES 1972) , PATENT OFFICE BRANCH , MUMBAI - 13 .

01 CLAIM

An equipment for enumerating dynamically growing microbial population comprising cuvette in the form of a glass test tube provided with two platinum electrodes, an oscillator circuit with a transformer for providing 1 to 7.5 volts AC supply connected on one side of said cuvette , the other side of cuvette being connected to a phase sensitivity demodulator circuit having an eliminator circuit for providing 7.5 to 30 volts DC supply power to the said phase sensitivity demodulator circuit; the said phase sensitivity demodulator circuit connected to a low pass filter and onwards to an amplifier circuit which in turn is finally connected to a display unit.

-8

FIG.3

Drawings : 01 sheet

Comp.specn .: 07 pages , 1156

THE GAZETTE OF INDIA , MARCH 29 , 2003 ( CHAITRA 8 , 1925 )

[PART III-SEC . 2- IND . CL .

145 E 3

189584 INT . CL .

D 21 C 3/00.

TITLE

A MEHTOD OF PRODUCING PULP WITH HIGH BRIGHTNESS .

APPLICANT

CHEMPOLTS OY , TY- PPITIE 1 , FIN - 90650 , OULU, FINLAND, FINNISH CO. ,

INVENTOR( S)

1. PASI ROUSU

2. PAIVI ROUSU

3. ESA ROUSU

APPLICATION NO :

645/BOM/ 1997 FILED ON : 05.11.97

PRIORITY NO . 964466 DATED 06.11.96 OF FINLAND

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES 1972) , PATENT OFFICE BRANCH , MUMBAI - 13 .

16 CLAIMS

A method of producing pulp with high brightness by single stage cooking with formic acid utilizing good delignification characteristic of formic acid at temperature exceeding 80 ° C , preferably at a temperature higher than the normal boiling point of formic acid and subsequently bleaching the pulp by using oxidizing bleaching chemicals .

Complete Specification : 21 Pages ;

Drawings 01 Sheets .

1157 THE GAZETTE OF INDIA , MARCH 29 , 2003 ( CHAITRA 8, 1925 )

PART III-SEC . 2]

189585

IND . CL .

: 39, 62 A2

C 11 D- 3/39

INT . CL .

A PROCESS FOR PREARING BLEACHING COMPOSITIONS TITLE

APPLICANT

HINDUSTAN LEVER LIMITED , HINDUSTAN LEVER HOUSE, 165/166 , BACKBAY RECLAMATION, MUMBAI 400 020, MAHARASHTRA , INDIA . AN INDIAN COMPANY .

INVENTORS

(1)

KATHERINE MARY THOMPSON

DAVID WILLIAM THORNTHWAITE

(2)

654 BOM 1997 FILED ON 10.11.1997

APPLICATION NO :

Priority No. 9624840.6 dated 29.11.1996 of GB - United Kingdom .

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4 , PATENTS RULES, 1972 ) , PATENT OFFICE BRANCH , MUMBAI - 13 .

05 CLAIMS

A process for preparing a bleaching composition which comprises mixing , at a pH of 10-14, hydrogen peroxide with an oxygen transfer agent which is a compound comprising ions of the general structure:

(R₁ ) ( R2 ) C = N + ( R3 ) ( R4 )

wherein:

R, and R₁ are in a cis -relation and are substituted or unsubstituted radical selected from the group consisting or hydrogen , phenyl , aryl , heterocyclic ring , alkyl and cycloalkyl radicals;

R₂ is a substituted or unsubstituted radical selected from the group consisting of hydrogen , phenyl , aryl , heterocyclic ring , alkyl cycloalkyl , nito , halo cyano , alkoxt , keto , carboxylic acid and carboalkoxy groups ; and.

R; is a substituted or unsubstituted radical selected from the group consisting of hydrogen , phenyl , aryl , heterocyclic ring, alkyl , cycloalkyl , nito.halo and cyano groups .

Drawings NIL

Comp.specn . 26 pages .

6-517G1/2002 1158

THE GAZETTE OF INDIA , MARCH 29 , 2003 ( CHAITRA 8 , 1925)

[PART III-SEC. 2 IND. CL

128G

189586 INT . CL .

B44 B 1/06

TITLE

A SKETCHING DEVICE FOR USE BY A BLIND PERSON APPLICANTS

DILIP BAL MUKUND BHATT AND

PRAGNYA DILIP BHATT

BOTH INDIAN NATIONALS,

204, AAWAS APARTMENTS ,

BHAI KAKA NAGAR,

THALTEJ ROAD , AHMEDABAD : 380 059,

GUJARAT, INDIA.

INVENTOR

IDEM

APPLICATION NO .: 672/BOM/ 1997 FILED ON : 17/11/1997

COMPLETE SPECIFICATION FILED AFTER PROVISIONAL SPECIFICATION ON : 02/02/1999

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS RULE 4 , PATENTS RULES 1972 ), PATENT OFFICE BRANCH, MUMBAI - 13.

5 CLAIMS.

1. Asketching device for use by a blind person comprising a pen body secured to a metallic encloser, a T-slot being provided in the opposite sides of said encloser for holding a bobbin spool rotatably and removably therein for winding acrylic or woolen thread thereon, meansbeing provided at the writing end of the pen body for cutting the thread, a pilot end being provided with said bobbin spool for the replacement of said thread when required.

Fig 1

Provisional Specification: 05 Pages

Drawings :Nil .

Complete Specification : 09 Pages ; Drawings :02 Sheet.

PART III-SEC: 2]

1159 THE GAZETTE OF INDIA , MARCH 29 , 2003 ( CHAITRA 8 , 1925 )

189587

32F 3 C

IND . CL .

INT . CL .

C 08 В 15/00

TITLE

IMPROVEMENTS IN OR RELATING TO A PROCESS FOR THE PREPARATION OF HYDROXY PROPYLMETHYL CELLULOSE .

APPLICANT

GUJARAT ALKALIES AND CHEMICAL LIMITED P.O.PETROCHEMICALS 391346 , DISTRICT - VADODARA , GUJARAT.

1. MR . SHAILESH PATEL

INVENTOR( S) :

2. DR . SUNIL SINHA

3. DR . AMAR NATH MISRA

4. MR . MAYURKANT PADH

5. DR . GITESH SHAH

717/BOM/ 1997 FILED ON : 12.12.97

APPLICATION NO :

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES 1972 ) , PATENT OFFICE BRANCH, MUMBAI – 13 .

05 CLAIMS

An improved and economical method for preparation of hydroxy propyl methyl cellulose which is a single pot process characterize in that the reaction of cellulose powder with caustic lye under nitrogen atmosphere and efficient stirring to form alkali cellulose which is further reacted with propylene oxide followed by reacting with excess of methyl chloride giving high yield of uniformly substituted hydroxy propyl methyl cellulose in the absence of any solvent, conforming to all laid down Pharmacopoela Specifications .

Drawings NIL Sheets .

Complete Specification : 10 Pages ;

1 1160

THE GAZETTE OF INDIA , MARCH 29 , 2003 ( CHAITRA 8. 1925)

[PART II-Sec. 2 IND . CI

32F 2C

189588

INT . CL .

C 07 C 101/26

TITLE

IMPROVEMENTSIN OR RELATING TO A PROCESS FOR THE PREPARATION OF ETHYLENE DIAMINE TETRA ACETIC ACID.

APPLICANT

GUJARAT ALKALIES AND CHEMICALS LIMITED P.O. PETROCHEMICALS 391346, DISTRICT - VADODARA, GUJARAT, INDIA .

AnIndian Company

INVENTORS

1. MR . MUKUL SANGHVI

2. DR. SIDDHARTHA SHUKLA

3. DR. AMAR NATH . MISRA

4. MR. MAYURKANT PADH

5. DR. GITESH SHAH .

APPLICATION NO . :

718 / BOM/1997 FILED ON 12.12.97

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4, PATENTS RULES 1972) , PATENT OFFICE BRANCH, MUMBAI - 13

04- CLAIMS .

An improved process giving high purity and >96% yield of Tetra sodium salt of ethylene diamine tetra acetic acid (Na4EDTA) in solution comprises in that the formaldehyde solution is reacted with the mixture of ethylene diamine (EDA) and sodium cyanide (NaCN) solution at temperature 60-80 °C with the simultaneous removal of ammonia under the flow of nitrogen.

Complete specification 04 Pages

Drawings NIL Sheets .

1161 THE GAZETTE OF INDIA , MARCH 29 , 2003 ( CHAITRA 8 , 1925)

PART III-SEC. 2]

32B

IND . CL .

189589 :

C 08 B 15/00

INT . CL .

TITLE

IMPROVEMENTS IN OR RELATING TO A PROCESS FOR THE PREPARATION OF METHYL CELLULOSE.

APPLICANT

GUJARAT ALKALIES AND CHEMICALS LTD . ,

P.O. PETROCHEMICALS 391 346 ,

DIST . VADODARA , GUJARAT,

INDIA , AN INDIAN COMPANY .

1. SHAILESH PATEL

INVENTOR( S) :

2. DR . SUNIL SINHA

3. DR. AMAR NATH MISRA

4. MAYURKANT PADH

5. DR . GITESH SHAH

719 /BOM/ 97 FILED ON : 12.12.97

APPLICATION NO :

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4, PATENTS RULES 1972) , PATENT OFFICE BRANCH, MUMBAI – 13 .

05 CLAIMS

An improved and economical method which characterize in the formation of methyl cellulose by reacting cellulose powder with caustic under nitrogen atmosphere and efficient stirring , is further reacted with excess of methyl chloride giving high yield of uniformly substituted methyl cellulose without using any solvent and product conforming to all laid down Pharmacopoeia Specifications .

Drawings NIL Sheets .

Complete Specification: 09 Pages ;

1162

THE GAZETTE OF INDIA, MARCH 29, 2003 ( CHAITRA 8, 1925)

[PART III-SEC . 2 IND. CL.

: 32D

189590 INT. CL .

C07 F 7/28

TITLE

: A PROCESS FOR PREPARING LUBRICATING GREASE COMPOSITION.

APPLICANT

: INDIAN OIL CORPORATION LIMITED, (A GOVT. OF INDIA UNDERTAKING) , OF G -9 , ALI YAVAR JUNG MARG, BANDRA (EAST) , MUMBAI - 400 051 . MAHARASHTRA , INDIA .

AN INDIAN CO.

INVENTORS

1. ANOOP KUMAR .

2. SURESH CHANDRA NAGAR

3. KANTA PRASAD NAITHANI .

4. MADAN MOHAN RAI .

5. AKHILESH KUMAR BHATNAGAR.

APPLICATION NO .

720/BOM/ 1997

FILED ON : 12-12-1997 .

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES 1972) , PATENT OFFICE BRANCH, MUMBΑΙ 13.

07 CLAIMS

Aprocess for preparing a lubricating grease composition, comprising ;

i. Preparing a mixture of 1.0 to 20.0% by weight carboxylic acid , 1.0 to 30.0% by weight fatty acid and 20 to 90% by weight mineral oil /synthetic oil under stirring , and heating said mixture to a temperature of 40 to 110 deg C under vacuum,

ii. adding 1 to 20% by weight titanium alkoxide slowly under continuous stirring and maintaing the mixture at the above temperature for a period of 15 min 5 hours ,

iii. raising the temperature to 210 deg C, slowly and maintaining the same for 10 minutes to 5 hours, breaking the vacuum and cooling the same slowly to a temperature of 160 -60° C. and then subjecting said composition to the step of homogenization / milling to get grease thecomposition.

Complete specification : 17 pages ,

Drawings : NIL Sheets 1163 PART III-- SEC . 2]

THE GAZETTE OF INDIA , MARCH 29 , 2003 ( CHAITRA 8 , 1925)

Ind. Cl .:

72B

189591

IntCI :

C06B 31/28

"A CRYSTALLINE POROUS PRILLED AMMONIUM NITRATE AND HOLLOW MICROSPHERE COMPOSITION AND A METHOD OF PRODUCING THE SAME "

APPLICANT( S) :

SASOL CHEMICAL INDUSTRIES

( PROPRIETARY) LIMITED

A SOUTH AFRICAN COMPANY OF 1 STURDEE AVENUE, ROSEBANK JOHANNESBURG , 2196 REPUBLIC OF SOUTH AFRICA

INVENTOR( S):

1. EDWIN BALS;

2. JACOBUS BREEDT;

3. WILLIAM LUCIANO SPITERI ;

4. ADRIAAN JOHANNES GOOSEN .

989/MAS/94

filed on 14-Oct-94

Application No.

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES , 1972 ) PATENT OFFICE, CHENNAI BRANCH .

33 CLAIMS

A crystalline porous prilled ammonium nitrate and hollow microsphere composition of reduced density comprising 90.0% to 99.95% (mass per mass ) of ammoniurn nitrate and from 10% to 0.005 % ( mass per mass) of atleast one type of hollow microspheres selected from the group of known polymer balloons , glass balloons , hollow metal spheres , perlite fly ash floaters , said hollow microspheres being present in the crystalline structure of said porous prilled composition.

A method of producing a porous prilled ammonium nitrate/hollow microsphere composition of reduced density as claimed in any of the preceding claims comprising the steps of continuously adding hollow microspheres to a solution of ammonium nitrate during prilling, to disperse said microspheres in the ammonium nitrate solution and to incorporate the same in the crystalline matrix of ammonium nitrate while it solidifies during said prilling process .

26 PAGES DRAWING : I SHEET .

COMP . SPECN :

1164

THE GAZETTE OF INDIA , MARCH 29, 2003 ( CHAITRA 8 , 1925 )

[PART III-SEC. 2 Ind. Cl .:

33A

189592

IntC :

B 22D 11/10

B 22D 11/14

"CONTINUOUS CASTING PLANT AND A METHOD FOR THE MANUFACTURE OF THIN SLABS "

APPLICANT(S):

MANNESMANN AKTIENGESELLSCHAFT , A

GERMAN COMPANY, OF MANNESMANNUFER 2, 40213 DUSSELDORF GERMANY

INVENTOR(S):

1. DR . -ING.FRITZ - PETER PLESCHIUTSCHNIGG .

APPLICATION NO :

209 MAS 95 Filed on 22-Feb-95

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4, PATENTS RULES , 1972 ) PATENT OFFICE , CHENNAI BRANCH ..

10CLAIMS

Aprocess for continuously casting thin slabs , comprising the steps of:

Casting molten metal using an immersion nozzle in a tapered oscillating mold having a mold inlet cross sectional area and a smaller mold outlet cross sectional area while maintaining conditions for the immersion nozzle and the mold so that:

FST

----≤50,

FTA

Where FST a cross sectional area of a completely solidified slab , and FTA across sectional area of an outlet of the immersion nozzle ;

supplying casting powder to the molten so that a relationship

hsjag ≥hstrand shell

where hsing a height of a layer of slag proximate an upper surface of the mold, and

hstrand shell- a height of a portion of a strand shell in the mold which penetrates the layer ofslag proximate the upper surface of the mold, is maintained depending on the oscillating stroke , shape and frequency of mold movement;

reducing the strand cross sectional area directly below the mold in a plurality of steps in a cluster foll stand to form a forced convection in a remaining liquid interior of the strand parallel to a continuous strand thickness reduction, so that the strand achieves its final thickness while still having a liquid core at the end of the cluster roll stand; and controlling solidification so that two-phase zone is present within the strand after achieving the final thickness at an output of the cluster roll stand.

Fig.1.

COMP SPECN : 14 PAGES . DRAWING : 7 SHEETS .

12- PART III-SEC . 2]

1165 THE GAZETTE OF INDIA , MARCH 29 , 2003 ( CHAITRA 8 , 1925 )

102D

189593 Ind . Cl . :

Int.

G01 F 3/12

" A. VORTEX FLUID METER "

SCHLUMBERGER INDUSTRIES SA

APPLICANT( S ) :

50 AVENUE JEAN - JAURES

92120 MONTROUGE

FRANCE

A FRENCH COMPANY

1. BARBARA ZIELINSKA;

INVENTOR (S) :

2. SOUAD ZIKIKOUT .

359 MAS 95 filed on 23-Mar-95

APPLICATION NO :

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4, PATENTS RULES , 1972 ) PATENT OFFICE , CHENNAI BRANCH.

28 CLAIMS

A vortex fluid meter ( 1 ) comprising a pipe portion (2) of constant inside diameter D in which the fluid flows , at least two obstacles , consisting of an upstream obstacle (4) and a downstream obstacle (6) disposed in the middle of the fluid flow in said pipe portion (2) to generate main fluid vortices (20 ) in an oscillatory manner , each of said obstacles (4, 6) having a generally elongate shape with longitudinal and transverse dimensions perpendicular to the direction of the flow of the fluid, and means ( 10, 12, 14, 200-221 ) for detecting the signal corresponding to the oscillations of said vortices and for deducing therefrom the volume of fluid, characterized in that the upstream obstacle (4) of longitudinal dimension h has two larger faces (4a, 4b) perpendicular to the direction of flow of the fluid and spaced by a distance t, an upstream face (4a) of transverse dimension d greater than the transverse dimension of the downstream face (4b) and two symmetrical smaller lateral faces (4c, 4d) each at an angle B to said upstream face (4a) , the upstream obstacle (6) being in two parts (7, 8) joined together in a T- shape configuration, the first part (7) with longitudinal dimension h and transverse dimentionl having two parallel larger faces (7a, 7b) , consisting of an upstream face (7a) parallel to the downstream face (4b) of said upstream obstacle (4) and at distance dl from the latter and a downstream face (7b), and two smaller faces (7c , 7d) , the second part (8) having two larger faces (8a, 8b ) with the same dimensions and parallel to the direction of flow of the fluid and tow parallel smaller faces (8c, 8d) with the same dimensions and perpendicular to the direction of flow of the fluid.

AGENT: DePenning & Depenning

COMP.SPECN . 37 PAGES : DRAWING & SHEETS

REFERENCE CITED : EP- A - 0408 355 10 D -10d 100 106

7-517 G1/2002 1166

THE GAZETTE OF INDIA , MARCH 29, 2003 ( CHAITRA 8 , 1925)

[PART III-SEC. 2 Ind .Cl .:

4 OB and 32 E

189594 IntCi :

C 08 F 4/64

C 08 F10/02

"A PROCESS FOR PREPARING A CATALYST COMPOSITION FOR THE POLYMERIZATION OF ETHYLENE AND /OR 1 -OLEFINS "

APPLICANT( S) :

TICONA GMBH

A GERMAN COMPANPY OF AN DER B43 , 65451 KELSTERBACH GERMANY

INVENTOR( S):

1.DIETER BILDA; 2. LUDWIG BOHM .

Application No.

461/MAS/95

filedon 18-Apr-95

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES , 1972 ) PATENT OFFICE , CHENNAI BRANCH .

4 CLAIMS

Aprocess for preparing a catalyst composition for the polymerization of ethylene and/or 1- olefins for producing high molecular weight ethylene polymers having a molecular weight Mw equal of greater than 1.100 g/mol either in suspension or in the gas phase comprising reacting in a first reaction step (a) a magnesium compound of the formula I

R¹ -Mg -R² ( 1 )

Wherein R¹ and R² are identical or different , and are each a C1 - C20 alkyl radical , a Cs - C20 , cyclo alkyl radical , a C6 - C20 alkenyl radical with a halogenating agent of formula II

Xn- C- R3

(II)

Where X is a halogen atom, n is 3 and R³ is a hydrogen atom, a C1 -C20 alkyl radical , a Cs -C20 cyclo alkyl radical , a C6 - C20 aryl radical , or a C2 to C20 alkenyl radical to produce a catalyst support consisting of a compound of the formula III PART III-SEC . 2 ]

1167 THE GAZETTE OF INDIA , MARCH 29 , 2003 ( CHAITRA 8, 1925 )

X - Mg - X ( III)

Where X is a halogen atom , reacting said catalyst support in a second reaction step (b) with a hydrocarbon soluble titanium compound of the formula IV

Ram-Ti - R4-m (IV)

Where Rº and R' are identical and are each a halogen atom, a C₁ to Co alkoxy group, or C₁ C20 carbony radical , and m is a number from 0 to 4, in an inert hydrocarbon medium at a temperature from 0 to 100°C in a molar ratio of Ti :Mg of from 0.01 to 1 ; a known electron donor in an amount of from 0.01 to 1 mol per mol of said Magnesium compound of formula III being present in one of the reaction steps (a) or (b) , reducing the dissolved titanium compound of formula IV with an aluminum alkyl to precipitate the same, on said catalyst support , said precipitate having a particle size of < 10/ µm and a particle distribution of Dm/Dn ≤ 1.20 wherein Dm and Dn represent mass average diameter and number average diameter .

1168

THE GAZETTE OF INDIA , MARCH 29 , 2003 ( CHAITRA 8 , 1925 )

[PART III- SEC . 2

32E & 32 C

Ind . Cl .

189595

C 08 F2/ 38

IntCI 4

"A PROCESS FOR ( CO ) POLYMERISING MONOMERS "

AKZO NOBEL N V

APPLICANT( S) :

A COMPANY ORGANISED UNDER THE LAWS

OF THE NETHERLANDS

OF VELPERWEG 76 6824 BM ARNHEM THE NETHERLANDS

1. PETRUS JOHANNES THEODORUS ALFERINK;

INVENTOR( S) :

2. HANS WESTMIJZE ;

3. JOHN MEIJER .

Filed on

5-May-95

543 MAS 95

APPLICATION NO :

APPROPRIATE OFFICE OFFOSITION PROCEEDINGS

( RULE 4. PATENTS RULES , 1972 ) PATENT OFFICE , CHENNAI BRANCH .

8 CLAIMS

1. Aprocess for (co) polymerising at least one monomer seieciechdrom vinyl ester, vinyl halide, diene, acrylonitrile and a-olefin monomers either alone or in combination with each other optionally with one or more ethylenically unsaturated monomers, comprising the step of polymerising said monomer with a known polymerization initiator in the presence of at least one chain transfer agent for reducing the molecular weight of said polymer produced in comparison with a polymer made by the same process without said chain transfer agent, said peroxyacid chain transfer agent being selected from the group represented by the following formulae:

RC - O - О - Н

wherein R is selected from the group consisting of H, CH3, C( 0 )ООН, С( 0 )ОН, С( 0 )ОCH, C( O )OR, C-C20 alkyl, Cr-C20 Cycloalkyl, Co-Co aryl, CC20 aralkyl and CC alkaryl, wherein the alkyl groups may be linear or branched and wherein the alkyl, cycloalkyl, aryl, aralkyl and alkaryl are optionally substituted with one or more groups Y, wherein Y is a group selected from -C( O )OOH, hydroxy , alkoxy, aryloxy, epoxy, halogen, - C( 0 )ORL, -OC( O)R), C(O )OH, nitrile,, nitro , C( O )NR, R2 -C( O )NHR1 , - C( 0 ) NH2 -N (R )C( O)R2, -SO₂NR, R2 SO₂NHR , SO2NH2 1169 THE GAZETTE OF INDIA , MARCH 29, 2003 ( CHAITRA 8 , 1925)

PART III-SEC . 2 ]

and -N ( R1 ) SO2R2 ; wherein R1 and R2 are independently selected from the group consisting of C2 -C20 alkyl , C3 - C20 cycloalkyl , C6 - C20 aryl , C7 - C20 aralkyl and C7 - C20 alkaryl , wherein the alkyl groups may be linear or branched ; and

( III )

0 R3 - X - R4 - C - 0-0 - H

wherein R3 is selected from the group consisting of , hydrogen , C1 - C20 alkyl , C3 - C20 cycloalkyl , C6 - C20 aryl , C7 - C20 aralkyl , C7 - C20 alkaryl and imido - group containing radicals , wherein the alkyl groups may be linear or branched ; R4 is selected from C1 - C20 alkylene , C2 - C20 alkenylene , C6 - C20 arylene ,

C7 - C20 aralkylene , C7 - C20 alkarylene , C3 - C20 cycloalkylene and C3 - C20 cycloalkenylene , wherein the alkylene and alkenylene groups may be linear or branched ; and R3 and / or R4 are optionally substituted with one or more groups Y as defined above ; and X is selected from nothing , -SO2- , -N ( R5 ) C ( 0 ) - , -C ( O ) N ( R5 ) - , -C ( 0 ) N [ C ( 0 ) ( R5 ) ] - , and -NHC ( O ) N ( H ) - ; wherein R5 is selected from the group consisting of C2 - C20 alkyl , C3 - C20 cycloalkyl , C6 - C20 aryl , C7 - C20 aralkyl and C7 - C20 alkaryl , wherein the alkyl 25

groups may be linear or branched and are optionally substituted with one or more groups Y as defined above ; and R3 and R5 combine to form a ring containing substituent selected from cycloalkyl , aryl , aralkyl or alkaryl , which ring is optionally substituted with one or more groups Y as defined above . can COMP.SPECN : 25 PAGES DRAWING : NIL SHEETS .

1170

THE GAZETTE OF INDIA, MARCH 29, 2003 ( CHAITRA 8 , 1925)

[PART III-SEC . 2 Ind . Cl .

19 B 2

189596 IntCI

F16B - 21 / 00

" IMPROVED REACTION NUT "

APPLICANT( S) :

HEDLEY PURVIS LIMITED

COOPIES LANE INDUSTRIAL ESTATE

MORPETH , NORTHUMBERLAND

NE61 6JU , UNITED KNIGDOM

( A BRITISH COMPANY)

INVENTOR( S):

1. DAVID CAMPBELL.

APPLICATION NO :

673 MAS 95

filed on 6-Jun-95

CONVENTION NO :

9411313.1

7-Jun-94

GBSN APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS RULE 4, PATENTS RULES , 1972 ) PATENT OFFICE , CHENNAI BRANCH .

11 CLAIMS

Areaction nut for location on a threaded bolt, the nut comprising a plurality of internally- threaded segments ( 22 ) movable between an outermost inoperative position radially spaced from the bolt (2), and an operative position making threaded engagement with the bolt (2), said segments (22) having tapering surfaces thereon, and a primary ring member (16) movable axially relative to the segments (22 ) and having a corresponding tapering surface (18) thereon, characterised by first resilient means (20) biasing the tapering surface ( 18) of the primary ring member ( 16) into engagement with the tapering surfaces on said segments (22) , and cam means (26 ) actuation of which moves the primary ring member, ( 16) from a rest position to an axially displaced position against the bias of said first resilient means (20) whereby the segments (22 ) are movable by associated second resilient means (24) between their operative and inoperative e positions .

COMP.SPECN: 17 PAGES DRAWING : 5 SHEETS 1171 PART III-SEC . 2]

THE GAZETTE OF INDIA , MARCH 29 , 2003 ( CHAITRA 8 , 1925 )

32E

189597

Ind . Cl . :

C 08 F 114/06

Int CI :

"A PROCESS FOR THE PREPARATION OF MIGRATION RESISTANT PLASTICIZED POLY ( VINYL CHLORIDE) ( PVC) "

APPLICANT( S) :

SREE CHITRA TIRUNAL INSTITUTE FOR MEDICAL SCIENCES AND TECHNOLOGY,

BIO -MEDICAL TECHNOLOGY WING ,

SATELMOND PALACE,

THIRUVANANTHAPURAM 695 012 , INDIA,

AN INDIAN INSTITUTION

INVENTOR( S) :

1. ATHIPETTAH JAYAKRISHNAN .

709 MAS 95

APPLICATION NO :

13-Jun-95

filed on

Complete Specification Left : 6 Sept. 1996.

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES , 1972 ) PATENT OFFICE , CHENNAI BRANCH .

15 CLAIMS

Aprocess for the preparation of migration resistant polyvinyl chloride ( PVC) comprising in the steps of treating cleaned plasticized PVC tubing with a solution of an alkali metal salt of a nucleophile selected from thiosulphate and sulphide , in the presence of a phase transfer catalyst (PTC) such as herein described, at a temperature in the range of 60 to 80 ° C for 5 hrs. followed by washing the tubings and drying to obtain migration selected from sodium , potassium and ammonium salt.

Prov. Specn ,: 8 Pages

COMP . SPCEN : 7 PAGES DRAWING : NIL SHEETS 1172

[PART III-SEC . 2 THE GAZETTE OF INDIA , MARCH 29, 2003 ( CHAITRA 8 , 1925 )

Ind.Class - 188

189598 Int.Cl C 23 C 28/04

"A METHOD FOR COATING AT LEAST THE INTERNAL WALL OF FURNACE TUBES FOR HYDROCARBON STEAM - CRACKING " Applicant: INSTITUT FRANCAIS DU PETROLE , a French Company , 4, avenue de Bois Preau , 92502 Rueil Malmaison, France .

Inventors: ( 1 ) BROUTIN PAUL , ( FRANCE)

( 2) NISIO PASCAL, ( FRANCE )

( 3 ) ROPTIAL FRANCOIS , ( FRANCE )

Application No. 717/MAS/95 dated June 14, 1995 .

AppropriateOffice for Opposition Proceedings (Rule 4, Patents Rules , 1972 ),

Patent Office , Chennai Branch .

9 Claims

A method for coating at least the internal wall of furnace tubes for hydrocarbon steam-cracking , made of a nickel and iron based superalloy containing less than 3 % by weight of aluminium , wherein in order to effect the passivation of said wall and/ or inhibit the formation of catalytic coke thereon, said wall is successively coated with atleast one intermediate layer formed of a compound selected from the group formed by titanium carbide TiC , titanium nitride TiN, aluminium nitride, nitrides with general formula TiuAl ,Nw where u , v and w are positive numbers , where u is a number between 0.4 and 0.62 , and v and w, which may be identical or different and are a number between 0 and land carbonitrides of titanium with general formula TixCyNz where x, y and z are positive numbers where x is a number between 0.35 and 0.55 and y and z , which may be identical or different and are number between 0 and 1 , and having a thickness of 0.1 x 10 to 30 x 100m and resulting from the chemical 1173 PART III-SEC . 2]

THE GAZETTE OF INDIA , MARCH 29 , 2003 ( CHAITRA 8 , 1925)

vapour deposition of at least one compound of a suitable metal or metalloid, at a temperature equal to or higher than 800° C and under a mole flow rate of 1 x 10 to 102 molar per cm² and per second and with an external layer formed of at least one stoichiometric type compound or formed by at least one solid solution formed from the Si - Al - O -N - C system and having a thickness of 0.1 x 10 to 30 x 10 and resulting from chemical vapour deposition of at least one silicon compound such as herein described, at a temperature equal to or higher than 800° C and under a molar flow rate of 1 x 10 to 102 mole per cm² and per second , at a pressure of from 1000 to 10,000 Pascals to obtain a coating of uniform thickness .

( Com . - 23 pages)

8-517GI/2002 [PART III-SEC . 2 THE GAZETTE OF INDIA , MARCH 29, 2003 (CHAITRA 8 , 1925)

1174.

189599

98 E

Ina. Cl . :

D02G -1 / 00

IntCl 4:

"AN APPARATUS FOR HEATING AN ADVANCING YARN "

BARMAG AG

APPLICANT( S ) :

A GERMAN COMPANY

OF LEVERKUSER STRASSE 65

42897 REMSCHEID

GERMANY

1. MARTIN FISCHER .

INVIENTOR ( S) :

14-6-1995 Germany

Filed on

722 MAS 95

APPLICATION NO:

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS RULE 4 , PATENTS RULES , 1972 ) PATENT OFFICE , CHENNAI BRANCH .

21 CLAIMS

Anapparatus for heating an advancing yarn, comprising an elongate rail which extends in a longitudinal direction and which has a generally flat yarn contact surface , and yarn guide means comprising a plurality of guide members mounted in a longitudinally spaced apart and interdigitally disposed arrangement along the length of said rail for engaging opposite sides of an advancing yarn and guiding the advancing yarn along and in contact with the yarn surface in a laterally zigzagged path of travel .

-60

18-

144

101

fig. 1.

146

Fig.2 .

64-

COMP.SPECN : 23 PAGES DRAWING : 4 SHEETS .

1175 THE GAZETTE OF INDIA, MARCH 29 , 2003 ( CHAITRA 8 , 1925)

PART III-SEC . 2]

189600

32F3 a

Ind. Cl .:

C 07 B 57/00

Int Cl 4 :

" A PROCESS FOR PRODUCING

AN OPTICALLY ACTIVE ALDEHYDE "

APPLICANT( S ) :

BRUCE ARMIN BARNER OF 233 WHISPERING PINES, ALUM CREER , WV 25003 , USA, A US CITIZEN.

JOHN ROBERT BRIGGS, OF 1522 BEDFORD ROAD , CHARLESTON , STATEOF W VA,. 25314 , USA, A UK CITIZEN .

JONATHAN JOSHUA KURLAND , OF 1617 KIRKLEE ROAD CHARLESTON STATE OF W VA 25314 , USA, A UK CITIZEN & CHARLES GUTHRIE MOYERS , JR . , OF 5 QUAIL COVE ROAD CHARLESTON, STATE OF W.VA25314 , USA, A US CITIZEN.

3.JONATHAN JOSHUA KURLAND;

1.BRUCE ARMIN BARNER;

INVENTOR( S) :

4. CHARLES GUTHRIE MOYERS JR .

2.JOHN ROBERT BRIGGS;

16-Jun-95

filed on

726 MAS 95

APPLICATION NO :

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4, PATENTS RULES , 1972 ) PATENT OFFICE, CHENNAI BRANCH .

16 CLAIMS

R- 2-(2-

R-2-

R-2-(4 - isobutylphenyl )-butyraldehyde ,

phenylbutyraldehyde ,

phenoxypropionaldehyde ,

Aprocess for producing an optically active aldehyde (first aldehyde selected from S- 2-(p-isobutyl -phenyl ) propionaldehyde, S - 2- (6 - methoxy - 2-napthyl ) propionaldehyde , S- 2- (3-benzoylphenyl ) propionaldehyde , S - 2-(p - thienoylphenyl ) -propionaldehyde , S-2-(3 - fluro -4 -phenyl ) -phenylpropionaldehyde , S -2- [ 4- ( 1,3 - dihydro - 1 -oxo - 2H - isoindol- 2-yl ) phenyl ] -propionaldehyde , S - 2- (2 - methylacetaldehyde) -5 - benzoylthiophene , S - 2-(3- phenoxy) -propionaldehyde, butyraldehyde, S- 2 -phenoxypropionaldehyde , S - 2 - chloropropion - aldehyde, R- 2- (3- benzoylphenyl ) propionaldehyde or R-2-(3 - fluro - 4-phenyl ) -phenylpropionaldehyde) containing a reduced amount of the corresponding enantiomeric aldehyde (second aldehyde selected fromR- 2-(p- isobutyl -phenyl ) propionaldehyde , R- 2- (6 - methoxy -2- naphthyl ) -priopionaldehyde , R-2-(3 - benzoylphenyl ) propionaldehyde, R- 2- (p- thienoylphenyl ) -propionaldehyde , R- 2- (3 - fluoro -4 -phenyl ) -phenylpropionaldehyde, R-2- S-2-phenylbutyraldehyde , S-2-(4- isobutylphenyl )- [4- ( 1,3 - dihydro - 1 - oxo - 2H - isoindol - 2-yl ) phenyl ] -propionaldehyde , methylacetaldehyde ) -5 -benzoylthiophene, R-2- (3 -phenoxy )-propionaldehyde , R-2- chloropropion- aldehyde, S-2-(3 - benzoylphenyl ) propionaldehyde or S-2-(3 - fluro -4- phenyl )-phenylpropionaldehyde ) which process comprises: ( 1 ) providing an initial solution containing a non- eutectic mixture of the first 1176

THE GAZETTE OF INDIA , MARCH 29, 2003 ( CHAITRA-8 ,-1925 )

[PART III-SEC. 2 'aldehyde and the second aldehyde prepared by contacting a prochiral or chiral compound in the presence of an optically active metal- ligand complex catalyst, said optically active metal ligand complex catalyst comprising a metal complexed with an optically active ligand having the formula

Wherein each W is the same or different and is phosphorus, arsenic or antimony, each X is the same or different and is oxygen , nitrogen or a covalent bond linking W and Y, Y is a substituted or unsubstitued hydrocarbon residue , each Z is the same or different and is a substituted or unsubstituted hydrocarbon residue or the Z substituents bonded to W may be bridged together to form a substituted or unsbstituted cyclic hydrocarbon reside , and m is a value equal to the free valence of Y, provided at least one of Y and Z is optically active; the substituents referenced above being known said contacting being carried out at a total gas pressure of hydrogen, carbon monoxide and prochiral or chiral compound of less than 1500 psia, a temperature of from 0° C to 120°C and a molar ratio of gaseous hydrogen to carbon monoxide of from 1:10 to 100: 1 ; which mixture has a composition in the compositional region where only the first aldehyde crystallizes when its solubility limit in the solution limit in the solution is exceeded, such crystallization occurring under conditions of addition of a non - solvent to the solution, removal of any solvent from the solution, cooking the solution and combinations of these conditions, and (2) maintaining the solution at a temperature above the eutectic temperature of the mixture and under conditions such as controlling the relative concentration of the first and second aldehydes, temperature , and combinations of these conditions on a known manner such that the solubility limit of the first aldehyde is exceeded so as to form a crystalline first aldehyde containing relatively less of the second aldehyde than was present in the initial solution ; and in which the optically active product is in an enantiomeric excess of greater than 96% and the regioselectivity of the product, in terms of its branched to normal isomer ratio , is greater than 100 : 1.

1177 THE GAZETTE OF INDIA , MARCH 29 , 2003 ( CHAITRA 8, 1925)

PART III-SEC . 2]

189601

128 F [XIX( 2) ]

IND. CL .

A 61 M 5/32

INT . CL .

TITLE

SELF - BLUNTING NEEDLE MEDICAL DEVICES AND METHODS OF MANUFACTURE THEREOF .

BIO - PLEXUS , INC .

APPLICANT

129 RESERVOIR ROAD, VERNON , CONNECTICUT 06066 , UNITED STATES OF AMERIKA

1. MARK J. BURZYNSKI

INVENTORS

2. ALEXANDER K. JONES

3. RICHARD S. KEARNS

4. JOHN M. POLIDORO

5. CARL R. SAHI

6.. CHAD C. SMUTNEY

FILED ON : 17-12-1997

730 BOM 1997

APPLICATION NO .

DATED 19-12-1996 OF U.S. A PRIORITY ΝΟ . 08 /772,002

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4, PATENTS RULES 1972) , PATENT OFFICE BRANCH , MUMBAI 13 .

21 CLAIMS

Aself-blunting needle cannula device comprising:

(a) an external component comprising a cannula member having an outside diameter, a.cannula distal end and a proximal end , and an external member hub on the cannula member and spaced from the cannula distal end, the cannula member further defining a through-bore having a through- bore inside diameter ;

(b) an internal component comprising an elongate internal member having a member distal end , and an internal component hub on the internal member and spaced from themember distal end, the internal member being disposed within the through-bore of the cannula member of the external component;

Wherein the external component comprises one of ( i ) a needle component wherein the cannula member comprises a needle cannula having a puncture tip at the cannula distal end thereof, and ( ii ) a blunting component wherein a cannula member comprises a blunting member having a blunt tip at the cannula distal end thereof, and the internal component comprises the other of (i) and ( ii ) , and wherein the needle component and the blunting component are movable relative to each other between a retracted blunting component positioned in which the blunt tip is positioned short of the puncture tip of the needle cannula to leave the puncture tip exposed , and an extended blunting component position in which the blunt tip extends beyond the puncture tip of the needle cannula to effectively blunt the puncture tip; and

(c) a guide member at the proximal end of cannula member and having a first aperture of greater diameter than the through- bore inside diameter and a first gate aperture of lesser diameter than the first entry aperture , the first gate aperture being axially aligned with the through- bore adjacent to the proximal end of the cannula member , the guide member defining a first guide surface that converges as sensed moving from the first entry aperture to the first gate aperture , to thereby guide insertion of the internal elongate member into the through -bore during assembly of the needle cannula device .

-22

1 .

Complete specification : 29 pages , Drawings : 05 Sheets 1178

THE GAZETTE OF INDIA , MARCH 29 , 2003 ( CHAITRA 8 , 1925)

[PART III SEC. 2 IND . CL

189602 153 [XLIII ( 3) ]

INT . CL .

B 24 B 9/16

TITLE

GRINDING/ABRASIVE TOOL FOR OPTIC GLASSES .

APPLICANTS

WINTER CVD - TECHNIK GMBH,

KONIGGRATZSTRASSE 14 ,

22809 HAMBURG , GERMANY,

GERMAN COMPANY.

INVENTORS

1. ERNST MICHALE WINTERR

2. HANS - JOACHIM WIEMANN .

APPLICATION NO .: 741 /BOM/ 1997 FILED ON : 22/12/1997

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS RULE 4, PATENTS RULES 1972) , PATENT OFFICE BRANCH , MUMBAI - 13 .

7 CLAIMS .

1. Grinding/ Abrasive Tool for grinding of optic glasses precious stones , marble & alike comprising a abbrasive plate ( 11 ) having curved inner surface ( 12) on which a number of abbrasive wheel ( 13 ) lies close against one another and thus form a grinding/ abbrasive surface ( 14) on which spectacle glass is placed during processing; said abbrasive plate has a coupling on the opposite side of the surface ( 12) through which the abrasive plate is bound to the grinding device; said abrasive wheel ( 13) has a base body ( 16) made of sintered ceramic material , outer surface ( 17) adjacent to the abrasive plate ( 11 ) is covered with a thin diamond layer; between the outer layer ( 17) and the diamond layer ( 18) their is another precision metal intermediate layer ( 19) which act as bonding layer; the said diamond layer (18) and/ or the total of the individual layer on the basic body ( 16) form the grinding/ abbresive surface ( 14) .

11

15

14 ( 13

FIG.1

Complete Specification : 10 Pages ; `

Drawings 03 Sheet.

1179 THE GAZETTE OF INDIA, MARCH 29, 2003 (CHAITRA 8 , 1925)

PART III -SEC . 2 ]

189603 : 32B (A)

IND . CL .

B 23D 3/34

INT . CL .

TITLE

A METHOD OF PRODUCING AQI EOUS SUSPENSION OF REFINED MINERAL SUBSTANCES .

: COATEX S. A. S.

APPLICANT

*35 , RUE AMPERE,

Z.I. LYON - NORD ,

69730 GENAY, FRANCE , FRENCH CO .

: 1. SUAU JEAN -MARC

INVENTORS

2. JACQUEMET CHRISTIAN

3. MONGOIN JACQUES

29-01-1998 .

FILED ON :

: 58/BOM/ 1998

APPLICATION NO .

DATED

9701973 :

PRIORITY NO

14-02-1997 OF FRANCE

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES 1972) , PATENT OFFICE BRANCH, MUMBAI 13 .

06 CLAIMS

Amethod of producing aqueous suspension of refined mineral substances of less than 1 microns which do not lend themselves to sedimention comprising treating aqueous suspension of coarser mineral substances with a bio degradable grinding aid of salt of polyaspartic acid so as to achieve grinding and suspension of refined mineral substance.

Drawings : NIL Sheets Complete specification : 35 pages , 1180

THE GAZETTE OF INDIA , MARCH 29 , 2003 (CHAITRA 8 , 1925)

[PART III SEC. 2 .

IND . CL . :

189604

32( F) (3 )( C)

INT . CL .

: C07 D 309/00 ;

309/08

TITLE

: IMPROVED PROCESS FOR PRODUCTION OF TERPENYL CYCLOHEXANOL .

APPLICANT

HINDUSTAN LEVER HOUSE , 165/166 BACKBAY

HINDUSTAN LEVER LTD . RECLAMATION MUMBAI - 400 020, MAHARASHTRA , INDIA .

INVENTORS

: 1. BENDAPUDI RAMAMOHAN RAO

2. VIJAY RAMCHANDRA GADGIL

APPLICATION NO . :

62/BOM/1998

FILED ON : 04-02-1998 .

COMPLETE SPECIFICATION FILED AFTER PROVISIONAL SPECIFICATION ON 04-02-1999 .

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4, PATENTS RULES 1972) , PATENT OFFICE BRANCH , MUMBAI 13 .

18 CLAIMS

A process for producing terpenylcyclohexanols which comprises the steps of:

i ) condensation of a terpene and a phenol in a weight ratio of terpene to phenol in the range of 1:0.9 to 1:10 at temperature range of 80 ° C to 250°C in present of a catalyst such as herein described

ii) fractionation of the mixture to isolate terpenylphenol ;

iii ) hydrogenation of terpenylphenol in presence of a catalyst such as herein described at a temperature of at least 100° C and pressure lower than 250 psi and in presence of any one of an alkali or a salt of an alkali metal , and

iv) fractionation of the mixture to isolate terpenylcyclohexanols .

Drawings : 02 Sheets Provisional specification: 09 pages , Complete specification : 14 pages ,

Drawings : 02 Sheets 1181 THE GAZETTE OF INDIA , MARCH 29..2003 ( CHAITRA 8 , 1925)

PART III- SEC. 2 ]

189605 189

IND . CL .

A 61 K - 35 /78

INT . CL .

TITLE

COMPOSITIONS CONTAINING HYDROXY ACIDS OR RETINOIDS

APPLICANT

HINDUSTAN LEVER LIMITED , HINDUSTAN LEVER HOUSE , 165/166 BACKBAY RECLAMATION , MUMBAI 400 020 , MAHARASHTRA , INDIA . AN INDIAN COMPANY.

INVENTORS

(1 ) RONNI WEINKAUF

(2) STEPHAN SAMUEL HABIF

(3) JOHN BRIAN BARTOLONE

APPLICATION NO : 69/BOM/ 1998 FILED ON : 09.02.1998 . Priority No.60/038008 dated 14.02.1997 of USA .

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4 , PATENTS RULES 1972 ) , PATENT OFFICE BRANCH , MUMBAI - 13.

05 CLAIMS

Acomposition comprising :

(i) a cosmetic benefit ingredient selected from the group consisting of a hydroxy acid such as herein described , retinal , retinoic acid , retinal , C₁₂- C, retinyl ester 0.01 to 20% and mixtures thereof;

(ii) from 0.05% to 10% by wt . of Trichodesma lanicum seed extract ;

(iii) a cosmetically acceptable vehicle.

Drawings: Nil

Comp.specn . 40 pages

9-517 G1/2002 1182

THE GAZETTE OF INDIA . MARCH 29 , 2003 ( CHAITRA 8 , 1925 )

[PART III-SEC . 2 IND . CL .

94G

189606 INT . CL .

B 03 B 9/02

TITLE

RECOVERY EQUIPMENT.

APPLICANT

FILTERWERK MANN + HUMMEL GMBH

HINDENBURGSTR 37-45 , POSTFACH 409 , 71631 LUDWIGSBURG, GERMANY , GERMAN COMPANY.

JANSSEN , MARK

INVENTOR ( S )

APPLICATION NO :

74/ BOM/ 1998 FILED ON : 10.02.98

PRIORITY NO . 197 04 859.5 DATED 10.02.97 OF GERMANY .

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4, PATENTS RULES 1972) , PATENT OFFICE BRANCH , MUMBAI – 13 .

08 CLAIMS

Recovery equipment for coolants and lubricants containing chips with an inlet piping , a tank ( 10 ) and a pump ( 20 ) connected to the tank ( 10 ), the pressure side of the pump is in connection with an outlet piping (28 ) , wherein the pump (20) is a free jet pump and in the tank a equipment ( 13 ) is fitted for pulverizing the incoming chips .

-13

21-

Fig. 1

Complete Specification : 09 Pages ;

Drawings 02 Sheets .

1183 THE GAZETTE OF INDIA , MARCH 29, 2003 ( CHAITRA 8, 1925 )

PART III-SEC . 2]

189607 :

26 [XLIII ( 1 ) ]

IND . CL .

A 46B 3/20

INT . CL .

TITLE

A TOOTHBRUSH WITH HANDLE AND BRISTLE BEARING HEAD .

HINDUSTAN LEVER LTD .

APPLICANT

HINDUSTAN LEVER HOUSE,

165/166 BACKBAY RECLAMATION

MUMBAI - 400 020 ,

MAHARASHTRA , INDIA .

1. STEPHEN JOHN RAVEN.

INVENTORS

2. DEREK GUY SAVILL .

12-02-1998 ..

76/BOM/1998

FILED ON :

APPLICATION NO .

17-02-1997 OF U. K.

DATED :

: 9703274.2

PRIORITY NO

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES 1972 ) , PATENT OFFICE BRANCH , MUMBAI 13 .

22 CLAIMS

Fig. 1.

A toothbrush having a handle at one end thereof and a bristle bearing head, the head comprising a skeleton . a resilient member mounted on at least one side of the skeleton , tuft mounting means in the skeleton and/ or resilient member for receiving bristles, the resilient member bristle tufts being capable of toggling movement , the resilient member tuft mounting means comprising an array of rigid receptacles or wells attached to the skeleton by a bridge hinge , characterised in that the bridge hinges are broken.

Complete specification : 30 pages , Drawings : 07 Sheets 1184

THE GAZETTE OF INDIA , MARCH 29 , 2003 ( CHAITRA 8 , 1925)

[PART III-SEC . 2 IND . CL .

189608 170D [ XLIII (4) ]

INT . CL .

C 11 D 017/00 011/00

TITLE

A BAR COMPOSITION AND PROCESS FOR MAKING SAME :

APPLICANT

HINDUSTAN LEVER LIMITED ,

HINDUSTAN LEVER HOUSE ,

165/166, BACKBAY RECLAMATION,

BOMBAY 400 020 , MAHARASHTRA ,

INDIA, AN INDIAN COMPANY .

1. TERENCE JAMES FARRELL

INVENTOR ( S) :

2. DAVID QUINN

3. GREGORY MCFANN

4. GAIL BETH RATTINGER

5. LIANG SHENG TSAUR

APPLICATION NO :

128 / BOM/ 98 FILED ON : 10.03.98

PRIORITY NOS . 08/821,502 DATED 21.03.97 OF U.S.A.

08/821,501 DATED 21.03.97 OF U.S.A.

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES 1972) , PATENT OFFICE BRANCH , MUMBAI - 13 .

14 CLAIMS

Abar composition comprising (A) about 1 % to 30% of an adjuvant powder comprising:

(a) 1% to 70% by wt . powder benefit agent ;

(b) 15% to 98% by wt. powder carrier having a melting point above the temperature in a drying chamber in which said adjuvant powder is formed;

(d) 0% to 30% by wt. powder of a deposition/ processing aid selected from the group consisting of

(i) anionic, cationic , nonionic and amphoteric surfactants;

(ii) cationic polymers ; and

( iii) hydrophilic polymers ; and

about 99% to 70% chips comprising 5 % to 90 % of a not clear surfactant system wherein the surfactant is selected from the group consisting of soap , anionic surfactant, nonionic surfactant. amphoteric surfactant , cationic surfactant and mixtures thereof.

Drawings NIL Sheets .

Complete Specification: 08 Pages ;

1185 THE GAZETTE OF INDIA , MARCH 29 , 2003 ( CHAITRA 8, 1925)

PART III-SEC . 2]

189609 :

170 B + D

IND . CL .

C 11 D.3/37

INT . CL .

C 11 D 3/50

A FABRIC SOFTENING COMPOSITION

TITLE

HINDUSTAN LEVER LIMITED ,

APPLICANT

HINDUSTAN LEVER HOUSE, BOMBAY 400 020 , MAHARASHTRA , INDIA , AN INDIAN COMPANY. 165/166 , BACKBAY RECLAMATION,

1. ZIYA HAQ

INVENTOR ( S ) :

2. STUART PETER ROBERT HOLT

3. ADELLE LOUISE KILLEY

4. CARLOS PETRI

5. CHRISTOPHER WHALEY

135/BOM/ 98 FILED ON : 12.03.98

APPLICATION NO :

PRIORITY NO . 9701287.4 DATED 14.03.97 OF BRAZIL

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES 1972) , PATENT OFFICE BRANCH , MUMBAI – 13 .

07 CLAIMS

Afabric softening composition comprising:

a) a fluorocarbon polymer which is a homo - or copolymer of the monomer .

CH2

C (R) CO.O (CH2 ) n Rf

in which R is H or CH3 , n is 1 or 2 , and Rf is a perfluoroalkyl residue or said fluorocarbon polymer is a fluorinated substituted urethane or a fluorinated acrylic co polymer; and b) a deposition aid comprising a quaternary ammonium cationic softening compound having two C 12-22 alkyl or alkenyl groups connected to the quaternary ammonium via at least one ester link;

with the proviso that the ratio of b ) : a) is greater thanor equal to 2:3 .

Drawings NIL Sheets .

Complete Specification : 19 Pages ;

1186

THE GAZETTE OF INDIA , MARCH 29 , 2003 ( CHAITRA 8 , 1925)

[PART III-SEC . 2 :

IND . CL.

189610

98 [ VII ( 2 ) ]

INT . CL .

B 21 D , 53/02.

TITLE

: A DEVICE FOR SUBSTANTIAL REDUCTION OF CONTAMINANTS IN FLUE GASES TO ACCOMPLISH EFFECTIVE TEMPERATURE OF OUT GOING FLUE GASES .

APPLICANT & INVENTORS : UDAY NARSINHA ANNACHHATRE, 1206/ 13 -B , SARASWATI SADAN , SHIVAJI NAGAR , PUNE 411 004 , MAHARASHTRA , INDIA . INDIAN NATIONAL

APPLICATION NO. :

150 /BOM/ 1998 FILED ON 17.03.1998

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4, PATENTS RULES 1972 ) , PATENT OFFICE BRANCH, MUMBAI - 13 .

01 CLAIM

A device for substantial reduction of contaniinants in flue gases to accomplish effective temperature of out going flue gases comprising an auxiliary chamber having an inlet for receiving exhaust gases ; a oil or gas fired burner, having a ball valve and solenoid valve, for producing a shower of flames , provided at the top center, in the said auxiliary chambers an outlet to said auxiliary chamber leading to adjacent chamber having at least one baffle wall to make down ward direction flow of flue gases and an outlet to the said adjacent chamber adapted to connect to heat exchanger .

ー 11

FIG 2

Comp.specn. 06 pages

Drawings : 01 sheet 1187 PART III-SEC . 2]

THE GAZETTE OF INDIA , MARCH 29 , 2003 ( CHAITRA 8 , 1925)

189611

IND . CL .

32D [ IX ( 1 ) ] , 40 B [ IV ( 1 ) ]

B01J - 31 / 12

INT . CL .

: A PROCESS FOR THE PREPARATION OF BENZYL BENZOATE TITLE

APPLICANT

INDIAN PETROCHEMICALS CORPORATION LIMITED , P.O.PETROCHEMICALS , DISTRICT- VADODARA 391 346 , GUJARAT, INDIA .

INVENTORS

ASHIS RANJAN BANDYOPADHYAY

:

(1)

(2) SUBRAMANIAPILLAI MUTHUKUMARU PILLAI (3) SHEO SATISH

156/BOM/ 1998 FILED ON 18.03.1998

APPLICATION NO :

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4 , PATENTS RULES 1972) , PATENT OFFICE BRANCH , MUMBAI - 13 .

21 CLAIMS

A process for the preparation of benzyl benzoate wherein said process is characterized by reacting methyl benzoate with benzyl alcohol at a temperature varying in the range of 130° C to 210° C in the presence of a catalyst , wherein said catalyst comprises at least one soluble tin compound of the kind such as herein described .

Drawings: NIL

Comp.specn .: 16 pages [PART III-SEC . 2 1188

THE GAZETTE OF INDIA , MARCH 29 , 2003 ( CHAITRA 8 , 1925 )

189612

: 170 B+ D

IND . CL .

C 11 D - 17/00

INT . CL .

TITLE

: PROCESS FOR THE MANUFACTURE OF TABLETS OF DETERGENT COMPOSITIONS .

APPLICANT

HINDUSTAN LEVER LIMITED , HINDUSTAN LEVER HOUSE , 165/166 , BACKBAY RECLAMATION , MUMBAI 400 020, MAHARASHTRA , INDIA . AN INDIAN COMPANY .

INVENTORS .

(1)

MICHAEL JOHN ADAMS

(2)

SARA JANE BONNELL

(3)

SIMON ANDREW WATSON

(4)

DOUGLAS WRAIGE

APPLICATION NO : 218 BOM 1998 FILED ON 13.04.1998 Priority No. 9707582.4 dated 15.04.1997 of United Kingdom APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES 1972 ) , PATENT OFFICE BRANCH , MUMBAI - 13 .

07 CLAIMS

A process for the manufacture of tablets of detergent composition , comprising compacting a particulate composition in a mould consisting of a plurality ofmould parts which are movable relative to each other,

Fig.1.

characterized in that at least one of the mould parts has an elastomeric layer on a surface area which contacts the composition , which elastomeric layer has a thickness of more than 0.5mm , and in that compaction is carried out with sufficient pressure to form tablets with a diametral fracture stress , DFS , as herein defined in the range 8 to 60 Кра.

10-

Comp.specn .: 35 pages

Drawings: 01 sheet 1189 THE GAZETTE OF INDIA , MARCH 29 , 2003 ( CHAITRA 8 , 1925)

PART III-SEC . 2]

189613

170B +D

IND . CL

C11 D- 3/28,3/37

INT . CL .

A DETERGENT COMPOSITION

TITLE

HINDUSTAN LEVER LIMITED ,

APPLICANTS :

HINDUSTAN LEVER HOUSE , 165/166 BACKBAY RECLAMATION , MUMBAI 400 020, MAHARASHTRA , INDIA. AN INDIAN COMPANY

1) SARAH DIXON

INVENTORS

2) TIMOTHY DAVID FINCH

3) JONATHAN FRANK WARR

FILED ON : 23.04.1998

244/BOM/1998.

APPLICATION NO . :

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4, PATENTS RULES 1972) , PATENT OFFICE BRANCH , MUMBAI - 13 .

12 CLAIMS

A detergent Composition comprising:

a)a dye transfer inhibiting polymer comprising one or more monomeric units containing at least one = N - C ( = O) with the proviso that the dye transfer inhibiting agent does not comprise an - oxide group ; and

b) a water soluble sunscreen compound such as herein described.

Drawings NIL

Comp.specn 37 pages

10-517 G1/2002 1190

THE GAZETTE OF INDIA, MARCH 29 , 2003 ( CHAITRA 8 , 1925 )

[PART III-SEC. 2 IND. CL

: 170D

189614

INT . CL

: C 11 D - 17/ 00

TITLE

:

PROCESS FOR FORMING DETERGENT BARS

APPLICANT

: HINDUSTAN LEVER LIMITED , HINDUSTAN LEVER HOUSE , 165/166 BACKBAY RECLAMATION, MUMBAI 400 020 , MAHARASHTRA, INDIA . AN INDIAN COMPANY.

INVENTORS

(1) PETER STEWART ALLAN

(2)

JOHN MARTIN CORDELL

(3) GRAEME NEIL IRVING

(4) SURESH MURIGEPPA NADAKATTI

(5) VIJAY MUKUND NAIK

(6) CHRISTINE ANN OVERTON

(7)

FREDERICK EDMUND STOCKER

(8) KARNIK TARVERDI

APPLICATION NO : 269/BOM/ 1998 FILED ON 12.05.1998 Priority Nos . 9710048.1 & 9726972.4 dated 16.05.1997 & 19.12.1997 ofU.K..

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4, PATENTS RULES 1972 ) , PATENT OFFICE BRANCH , MUMBAI - 13 .

06 CLAIMS

A process for forming detergent bars comprising delivering detergent composition to a mould and applying pressure to the detergent composition contained within the mould cavity such that the mould cavity is substantially full when the pressure is applied and the detergent composition is in a substantially fluid or semi- solid state when pressure is first applied.

Comp.specn 16 pages

Drawings :Nil 1191 THE GAZETTE OF INDIA , MARCH 29 , 2003 ( CHAITRA 8 , 1925 )

PART III-SEC . 2 ]

189615

128 F

IND . CL .

A 61 M 005/32

INT . CL .

A 65 M 005/00

TITLE

HYPODERMIC NEEDLE SAMPLE

COLLECTING DEVICE

SAKHARAM DHUNDIRAJ

APPLICANT

MAHURKAR , 6171 N. SHERIDAN

ROAD , SUITE 1112 , CHICAGO , IL 60660 , U.S.A. AMERICAN NATIONAL .

IDEM

INVENTOR ( S) :

393/BOM/1998 FILED ON : 19.06.98

APPLICATION NO :

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES 1972 ) , PATENT OFFICE BRANCH , MUMBAI – 13 .

13 CLAIMS

Ahypodermic -needle sample collection device , said device comprising:

an elongated, generally cylindrical barrel forming an aperture at the distal end of said barrel and opening into the interior of said barrel ;

a needle holder mounted for longitudinal movement within said barrel , said needle holder having a pin projecting laterally therefrom; a hollow hypodermic needle carried by said needle holder and projecting from said holder along the axis of said barrel ; and guide means forming longitudinal linear and spiral guide surfaces extending along at least a portion of the length of said barrel for engaging said pin and moving said needle longitudinally within said barrel in response to relative rotational movement between said linear and spiral guide surfaces .

30,31

13-

FIG . 1

130

Drawings 11 Sheets .

Complete Specification : 28 Pages ;

1 1192

THE GAZETTE OF INDIA , MARCH 29 , 2003 ( CHAITRA 8. 1925 )

[PART III-SEC . 2 IND . CL :

189 [ LVI (9) ]

189616

INT . CL .

A61 B ,1/24

TITLE

AN IMPROVED TONGUE CLEANER.

APPLICANTS :

PRASHANT NISHIKANT JOSHI ,

DAILY SAGAR,

BOMBAY GOA ROAD ,

CHIPLUN RATNAGIRI ,

RATNAGIRI INDIA ,

INDIAN NATIONAL .

INVENTORS

: - IDEM-

APPLICATION NO .: 452/BOM/ 1998 FILED ON : 13/07/1998

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS RULE 4, PATENTS RULES 1972) , PATENT OFFICE BRANCH, MUMBAI - 13 .

2 CLAIMS .

1) An improved tongue cleaner ( 1 ) of Plastic material consisting of a cleaning zone (2) madeup of a flat member (3 ) having transverse ribs (4) ; and a holding zone (5) which is at right angles to the said cleaning zone and provided with a slot for hanging means (6).

FIG.1

Complete Specification : 05 Pages ;

Drawings 01 Sheet.

1193 THE GAZETTE OF INDIA , MARCH 29 , 2003 ( CHAITRA 8 , 1925)

PART III -SEC . 2]

189617

IND . CL

80D [ IV]

INT . CL .

B 01D 33/00; F01 M

TITLE

FILTER DEVICE FOR LIQUIDS .

FILTERWERK MANN + HUMMEL

APPLICANTS

GMBH,

HINDENBURGSTR 37-45 ,

POSTFACH 409 ,

71631 LUDWIGSBURG ,

GERMANY .

GERMAN COMPANY .

INVENTORS

1. HERBERTJAINEK .

2. JAROSLAV PAVLIN

3. ROLAND WIEDERHOLD

FILED ON : 17/07/1998

APPLICATION NO . 464/BOM/ 1998

PRIORITY NO. 197 31 556.9 FILED ON 23/07/1997 OF GERMAN

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS RULE 4 , PATENTS RULES 1972) , PATENT OFFICE BRANCH, MUMBAI - 13 .

05 CLAIMS .

1) Filterdevice for liquid comprising

a concentric filter cartridge (8) which is being arranged about a direct flow central pipe (9 ) , whereby the liquid to be filtered flows in radial direction from the outside into the central pipe (9 ) passing through the filter cartridge ( 8 ) , and comprising

a bypass valve ( 11 ) , through which the liquid - under predefinable conditions candirectly enter the central pipe (9 ) from the outside passing through a bypass duct;

an annular diameter contraction ( 18 ) provided for accommodating the bypass valve ( 11 ) is being placed in the central pipe ( 9 ) at that end of the same where the bypass duct runs into it ;

FIG.1

axial links (20 ) are being arranged inside the central pipe ( 9 ) downstream the diameter contraction ( 18 ), with said links being provided with gaps in order to accommodate the valve body ( 16) by means of a valve spring ( 19 ), whereby the valve seat (21 ) of the valve body ( 16) slightly projects over the diameter contraction ( 18 ) while the valve spring ( 19 ) being in the loose state , and a valve plate ( 21 ) can be fastened outside the diameter contraction ( 18 ) in order to ensure that said valve plate sits close to the valve seat ( 22 ) of the valve body (16) against the pressure originating from the valve spring ( 19 ).

Drawings 02 Sheet .

Complete Specification : 12 Pages ;

1194

THE GAZETTE OF INDIA , MARCH 29 , 2003 ( CHAITRA 8 , 1925 )

[PART III-SEC . 2 IND . CL .

: 32 E

189618

INT . CL .

: C 08 F - 220/18

TITLE

: A METHOD FOR THE PREPARATION OF COPOLYMERIC BEADS FOR THE IMMOBILISATION OF BIOACTIVE MATERIALS .

APPLICANT

KOPRAN LIMITED , PARIJAT HOUSE, DR.E.MOSES ROAD , WORLI , MUMBAI 400 018 , MAHARASHTRA , INDIA .

INVENTORS

(1)

SUBHASH MALI

(2)

RAJAN GUPTE

(3)

JAYANT DESHPANDE

APPLICATION NO :

529/BOM/ 1998 FILED ON 19.08.1998

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4 , PATENTS RULES 1972) , PATENT OFFICE BRANCH , MUMBAI - 13 .

09 CLAIMS

Amethod for the preparation of copolymeric beads of acrylonitrile and glycidyl methacrylate, comprising:

a) copolymerising acrylonitrile with glycidyl methacrylate in water in presence of initiator, crosslinking monomer , porogen and protective colloid such as herein defined at a pH between 5.5 to 9.2,

b) refluxing the mixture under agitation in a glass vessel at 55-95 ° C for 2-8 hrs , c) cooling the reaction mass to room temperature,

d) filtering the polymeric suspension to separate out the polymer beads ,

e) washing the beads obtained in step d) with water followed by organic solvents and drying to obtain reactive polymeric beads .

Comp.specn . 09 pages ,

Drawings: NIL PART III-SEC . 2]

1195 THE GAZETTE OF INDIA , MARCH 29 , 2003 ( CHAITRA 8 , 1925)

189619

101 Η

IND . CL .

E 02B 5/02

INT . CL .

TITLE

AN AUTOMATIC SLIDING GATE FOR DYNAMIC REGULATION OF FLOW OF WATER THROUGH RIVER OR CANAL .

APPLICANT

PRABHAKAR DAMODAR GODBOLE 2/B , BUTY PLOTS , DHARAMPEΤΗ , NAGPUR -440010,MAHARASHTRA; INDIA, AN INDIAN NATIONAL .

-IDEM-

INVENTOR( S) :

APPLICATION NO :

645 /BOM/ 1998 FILED ON : 06.10.98

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES 1972 ) , PATENT OFFICE BRANCH , MUMBAI -13 .

02 CLAIMS

نا

FIGURE 1A

An automatic sliding gate for dynamic regulation of flow of water through a river or canal comprising of a rectangular box filled with water, a set of an entry and an exit valves provided in the upstream and downstream faces of the said box for filling in and exiting water from the said box, a set of four axles and wheels , two on each side provided on the sides of the said box , the said wheels rolling over a pair of inclined rails fixed in the supporting structure ; lower ends of the said rails being towards the closed position of the gate and upper ends of said rails being towards opened position of the gate and the said wheels being fitted with rotary dampers for preventing the hunting of said box during operation, by ensuring slow movements of the box.

Drawings 06 Sheets .

Complete Specification : 07 Pages ;

1196

[PART III-SEC. 2 THE GAZETTE OF INDIA , MARCH 29 , 2003 ( CHAITRA 8 , 1925 )

IND . CL .

189620

15 D [ LIV ( 1) ]

INT . CL .

F 16 C,43 /00

TITLE

: A CYLINDRICAL WINDOW TYPE CAGE FOR A NEEDLE BEARING AND METHOD OF MANUFACTURING THE SAME .

APPLICANT

: INA WALZLAGER SCHAEFFLER OHG OF D - 91072 HERZOGENAURACH, GERMANY, GERMAN CO .

INVENTORS

1. LEO MUNTNICH 2. WOLFGANG FUGEL.

APPLICATION NO .

FILED ON : 12-11-1998 .

717/BOM/1998

PRIORITY NO

197 54 836.9

DATED : 10-12-1997 OF GERMANY APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES 1972 ) , PATENT OFFICE BRANCH, MUMBAI 13 .

08 CLAIMS

A cylindrical window - type cage ( 1 ) for a needle bearing which receives the bearing needles (6) in pockets ( 5) uniformly spaced from one another by webs (4) , said pockets (5 ) being formed by punching and by stamping with a displacement of material in a cage strip ( 9 ) so that after the bending round of the cage strip (9 ) the bearing needles (6) are retained in inward direction by the inclination of the web walls and in outward direction by retaining projections ( 7 , 8) , characterized in that, in the unbent state of the cage strip (9) , the surfaces of the web walls of a pocket ( 5) situated opposite each other are formed in the region of the retaining projections (7 , 8 ) by three partial surfaces (10, 11 , 12) such that the two first partial surfaces ( 10) are parallel to a central vertical line ( 13 ) and merge at their upper ends into an inclined second partial surface (11) pointing towards that center of the pocket , each of the second partial surfaces ( 11 ) ending in athird partial surface ( 12 ) which is likewise parallel to the central vertical line ( 13 ) .

Fig . 3

12 -11 10-

13.

Complete specification: 17 pages ,

Drawings : 04 Sheets 1197 THE GAZETTE OF INDIA , MARCH 29, 2003 ( CHAITRA 8 , 1925)

PART III -SEC . 2]

189621

170 B + D

IND . CL .

CIID

INT . CL .

A LOW TFM DETERGENT BAR COMPOSITION

TITLE

: HINDUSTAN LEVER LIMITED , HINDUSTAN LEVER HOUSE .

APPLICANT

165/166 ВАСKBAY RECLAMATION , MUMBAI 400 020 , MAHARASHTRA , INDIA . AN INDIAN COMPANY.

INVENTORS

( 1 ) SUDHAKAR YESHWANT MHASKAR

(2) SUBHASH SHIVSHANKAR MHATRE

(3 ) RAJAPANDIAN BENJAMIN

811 BOM 1998 FILED ON 14.12.1998

APPLICATION NO :

Complete specification filed after provisional specification on 08.12.1999

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES 1972 ) , PATENT OFFICE BRANCH , MUMBAI - 13 .

10 CLAIMS

A low TFM detergent composition with superior sensory and physical properties comprising:

25 70% by wt . of total fatty matter such as herein described

9.016% by wt. of colloidal aluminium hydroxide (A- gel ) ; and

from 12 52% by wt. of water, with or without benefit agents such as herein described.

Drawings: Nil

Prov. Specn . 14 pages

Drawings: Nil

Comp.Specn . 17 pages ,

11-517 G1/2002 1198

THE GAZETTE OF INDIA, MARCH 29, 2003 ( CHAITRA 8 , 1925)

[PART III-SEC. 2 IND. CL

17 E (XIV(2)]

189622

INT. CL .

C 12N-9/28

TITLE

ΑΝ ΕΝΖΥΜΑTIC HYDROLYSIS PROCESS FOR THE PRODUCTION OF GLUCOSE SYRUPS FROM TAPIOCA STARCH.

APPLICANTS : IIT BOMBAY,

INDIAN INSTITUTE OF TECHNOLOGY, POWAI, MUMBAI : 400076 AND CHENGARA VEEDU ANOOP, AKKIHEBBAL KRISHNAMURTHY SURESH AND VINAY ANANT JUVEKAR, DEPARTMENT OF CHEMICAL ENGINEERING, IIT BOMBAY. ALL INDIAN NATIONALS

INVENTORS :

1. CHENGARA VEEDU ANOOP

2. AKKIHEBBAL KRISHNAMURTHY SURESH

3. VINAY ANANT JUVEKAR

APPLICATION ΝΟ . 844/ΒOM/ 1998 FILED ON : 30/12/1998

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS RULE 4, PATENTS RULES 1972) , PATENT OFFICE BRANCH, MUMBAI- 13.

04 CLAIMS .

1) An enzymatic hydrolysis process for the production of glucose syrups from tapioca starchwherein the liquefact after cooling to ambient temperature and prior to saccharification is flocculated with a mineral acid to a pH 2-4 or with an alkali to a pH 10-12 and aged under stirring followed by filtration of the liquefact and treatment of the filtrate with an ion exchange resin.

Complete Specification : 15 Pages ;

Drawings NIL Sheet .

1199 THE GAZETTE OF INDIA, MARCH 29, 2003 ( CHAITRA 8 , 1925)

PART III-SEC. 2]

189623

IND . CL .

32 F2 (a)

INT . CL .

A 61 K - 31 / 045 ; 31/085

TITLE

AN IMPROVED PROCESS FOR THE PREPARATION OF 1- [2- AMINO - 1- (P -METHOXYPHENYL) ETHYL ] CYCLOHEXANOL :

APPLICANT

ALEMBIC LIMITED , ALEMBIC ROAD , VADODARA 390 003 , GUJARAT, INDIA . AN INDIAN COMPANY .

INVENTORS

(1)

SUHAS V.SOHANI

(2)

BALDEV N.PATEL

(3)

PINKY PARIKH

(4)

SRINIVASAN RENGARAJU

1079 /MUM/2001 FILED ON 09.11.2001

APPLICATION NO :

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4 , PATENTS RULES 1972) , PATENT OFFICE BRANCH , MUMBAI - 13 .

07 CLAIMS

A process for the manufacture of 1-[ 2- amino- 1- (p - methoxyphenyl ) ethyl ] cyclohexanol or a pharmaceutically acceptable salt thereof of the structural formula of Fig.2 from 1- [ cyano (p - methoxyphenyl ) methyl ] cyclohexanol characterized in that 1- [cyano (p- methoxyphenyl ) methyl ) cyclohexanol is subjected to catalytic hydrogenation using a hydrogenation catalyst in a suitable solvent thereby resulting in the manufacture of 1- [2- amino- 1- (p - methoxyphenyl ) ethyl ) cyclohexanol or a pharmaceutically acceptable saltthereof.

Drawings: Nil

Comp.Specn . 13 pages 1200

THE GAZETTE OF INDIA , MARCH 29 , 2003 ( CHAITRA 8 , 1925 )

[PART III SEC . 2 IND . CL .

: 55E4

189624

32.G

INT . CL.

A 61 K 35/78

A 61 K.33 /30 , 33/04

C 07 D 307/62, 311/72, 415/00

C 07 H23/00

TITLE

: PROCESS FOR PREPARATION OF NOVEL COMPOSITION WITH CARROT PHYTONUTRIENTS FOR DIABETICS .

APPLICANT

AJANTA PHARMA LIMITED

AJANTA HOUSE , 98 , GOVT. INDUSTRIAL AREA , CHARKOP , KANDIVLI (W) , MUMBAI -400 067. MAHARASHTRA , INDIA,

AN INDIAN CO .

INVENTORS

1 . BIYANI MILIND KESHARLAL .

2. SIMHA NANDA PRATAP.

APPLICATION NO .

1038 /MUM/ 2001

FILED ON : 23-10-2001 .

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4 , PATENTS RULES, 1972) , PATENT OFFICE BRANCH, MUMBAIH3 .

08 CLAIMS

Aprocess for preparation of unique synergistic composition of carrot phytonutrients and other natural carotenoids derived from source like Dunaliella salina, or marigold or the like and/or combination thereof, in combination with chromium in oral dosage form for diabetics ; further comprising of other antioxidants like vitamin E, vitamin C or the like ; trace elements like zinc, selenium , or the like; vitamins like , vitamin B1 , vitamin B6 , Folic acid , vitamin B12, or the like in therapeutic range and other pharmaceutically accepted inert excipients , which comprises the steps of:

a. preparing active granule A - by blending carrot phytonutrients with folic acid, pyridoxine hydrochloride, cyanocobalamin, and thiamin monoitrate using appropriate diluent ; adsorbing the other natural carotenoids dispersion on suitable adsorbent; mixing adsorbed carotenoids with blend of carrot phytonutrients and vitamins ; granulating the resultant blend and drying,

b. preparing active granule B-by adsorbing selenium salt and chromium salt solution separately on vitamin E powder or. Vitamin E adsorbate prepared by adsorbing vitamin E acetate oil on suitable adsorbent and sifting; mixing the resultant blend with zinc salt and Vitamin C, followed by granulating; drying and sieving of the resultant granules.

mixing the active granules A and B, lubricating and drying, confpressing the dried lubricated granules into tablets using suitable dies and punches, followed by film coating in a conventional way, in a coating pan, 'c .

wherein, all the process step are carried out in diffused light, relative humidity not exceeding 50%, temperature not exceeding 25°C (except drying ), drying operations carried at temperature not exceeding 50°C, all steps carried out in succession immediately one following the other without any gap in-between, and keeping the exposure to air minimum throughout for avoiding degradation of sensitive materials and thereby improving stability.

Complete specification: 30 pages ,

Drawings : NIL Sheets 1201 THE GAZETTE OF INDIA , MARCH 29 , 2003 ( CHAITRA 8 , 1925 )

FART III-SEC . 2]

189625 55 E 2

IND . CL .

A 61 K 31/80

INT . CL .

A PROCESS FOR THE PREPARATION OF A KIT

TITLE

COMPRISING RECOMBINANT NUCLEOTIDE SEQUENCES COMPRISING 1-2381 BASE PAIRS (bp) FOR EARLY DETECTION OF ORAL CANCER.

APPLICANT

: CANCER RESEARCH INSTITUTE,

TATA MEMORIAL CENTRE , PAREL , MUMBAI – 400 012 , MAHARASHTRA , INDIA .

DR. DHANANJAYA SARANATH

INVENTOR( S)

868/MUM/2001 FILED ON : 11.09.2001

APPLICATION NO :

Divisional to : 392/BOM/99 dt . 24.5.99 .

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4, PATENTS RIJLES 1972) , PATENT OFFICE BRANCH , MUMBAI – 13 .

06 CLAIMS

A process for the preparation of a kit comprising recombinant nucleotide sequences comprising 1-2381 base pairs (bp) for early detection of oral cancer comprising mixing primers from the recombinant nucleotide sequences with a buffer system , a nucleotide mix and thermophilic polymerase enzyme .

Drawings 06 Sheets .

Complete Specification: 14 Pages ;

1202

THE GAZETTE OF INDIA , MARCH 29 , 2003 ( CHAITRA 8 , 1925)

[PART III-SEC. 2 IND . CL .

189626

55 E2+ E4 [ XIX ( 1) ]

INT . CL .

:

A 61 K ,31 / 00

TITLE

: A PROCESS FOR PREPARATION OF STABLE PHARMACEUTICAL COMPOSITION CONTAINING ANTIBACTERIAL SUBSTANCE AND MICROORGANISMS .

APPLICANT

: MACLEODS PHARMACEUTICALS LTD .

CHURCH ROAD , ANDHERI - KURLA ROAD ,

304-310 , ATLANTA ARCADE , MUMBAI -400 059 , MAHARASHTRA , INDIA .

AN INDIAN CO .

INVENTORS

: 1. DR . SHRUTI UMESH BHAT.

APPLICATION NO .

: 447/ MUM/ 2001

FILED ON : 10-05-2001 .

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4, PATENTS RULES 1972) , PATENT OFFICE BRANCH , MUMBAI 13 .

14 CLAIMS

Aprocess of preparation of a stable pharmaceutical composition comprising essentially of an admixture of anti - infective agent or a pharmaceutically acceptable salt thereof and (b ) therapeutic concentration of probiotic microorganism, incorporated with physiologically acceptable excipients selected in nature and quantities to formulate a solid or liquid oral dosage composition such as powder or tablet or capsule or liquid preparation with effects complementary to those provided by each separate active ingredient and which is stable for at least 36 months at ambient environment temperature - relative humidity .

Complete specification: 37 pages ,

Drawings : NIL Sheets PART III-SEC . 2]

1203 THE GAZETTE OF INDIA, MARCH 29 , 2003 ( CHAITRA 8 , 1925 )

189627 IND . CL .

55 E2 + E [ XIX( 1 ) ]

INT . CL .

A 61 K, 9/62

TITLE

A PROCESS FOR PREPARATION OF

PHARMACEUTICAL COMPOSITION

CONTAINING A GLUCOCORTICOID

APPLICANT

MACLEODS PHARMACEUTICALS LTD . , 304-310 , ATLANTA ARCADE, CHURCH ROAD , ANDHERI - KURLA ROAD , MUMBAI - 400059 , MAHARASHTRA , AN INDIAN COMPANY .

DR . SHRUTI UMESH BHAT

INVENTOR( S)

APPLICATION NO :

425/MUM/2001 FILED ON : 04.05.2001

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4, PATENTS RULES 1972) , PATENT OFFICE BRANCH, MUMBAI – 13 .

09 CLAIMS

Aprocess for the preparation of a pharmaceutical composition containing a glucocorticoid comprising, mixing the required ratios of pre-screened glucocorticoid and cyclodextrin; milling the mixture in a ball-mill containing balls made either of procelein or stainless steel ; ball milling the blend for a definite period of time for e.g. 2-8 hours with occasional scraping of the blend from the sides of the mill until the complex is formed; screening the complex solid through mesh; adding formulation additives such as binders , bulking agents, levigating agents, surfactants , etc. and granulating the mass to form a dough ; wet screening of the dough through 8 mesh and drying the granules obtained at 60 °C in a fluidized bed drier for 11-14 hours or in a tray drier for up to 12 hours until granules with moisture content between 2.5-3.0% w/ w are obtained; blending the dried granules with suitable excipients such as lubricated , disintegrants and glidants to form a suitable oral dosage form; extruding the aforementioned dough through an extruder to form rods which may be spheronized through a marumerizer to form beads or pellets ; encapsulating the beads or pellets into a hard gelatin capsule ; compressing the beads or pellets or granules into tablets after incorporating suitable excipients such as lubricants , disintegrants , flavor, colors and glidants , mixing the beads after passing through screen 40 mesh and adding sweetner, colors , flavors to form a formulation ready to reconstitute with water before administration .

Drawings NIL Sheets.

Complete Specification: 75 Pages ;

1204

THE GAZETTE OF INDIA , MARCH 29, 2003 ( CHAITRA 8 , 1925 )

[PART III-SEC. 2 " IND . CL

: 49C [XV(1 ) ]

189628 INT . CL .

B 29 C 042/26 . 45/16

TITLE

PROCESS FOR THE PREPARATION OF VEGETABLE AND FRUIT PIECES .

APPLICANTS

HINDUSTAN LEVER LIMITED,

HINDUSTAN LEVER HOUSE ,

165-166, BACKBAY RECLAMATION

MUMBAI : 400 020 .

MAHARASHTRA ,

INDIA

INVENTORS :

1. STEPHEN RAYMOND MOORE .

2. SHIPING ZHU

APPLICATION NO .: 329/MUM/2001

FILED ON : 11/04/2001

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS RULE 4 , PATENTS RULES 1972 ) , PATENT OFFICE BRANCH , MUMBAI - 13 .

08 CLAIMS .

1. Process for the preparation of vegetable of fruit particles comprising contacting vegetable or fruit ( in whole or particles thereof) with an aqueous solution of a biopolymer , whereafter the particles are subjected to conditions as herein described under which said biopolymer (at least partially) thickens or sets to a gel, wherein the biopolymer is one that is capable to thicken or gel in the absence of divalent cations .

Fig.1.

Motor

Digital Tachometer

PerspexCup

Apple Sample

Viscous Flad (glucose syrup)

-Digital Camera

Complete Specification : 14 Pages ;

Drawings 02 Sheet .

1205 THE GAZETTE OF INDIA , MARCH 29, 2003 ( CHAITRA 8. 1925)

PART III-SEC . 2]

189629

92F

IND . CL .

: A 23 L - 1 / 105

INT . CL .

TITLE

PROCESS FOR THE PRODUCTION OF A HEAT TREATED WHEAT

APPLICANT

HINDUSTAN LEVER LIMITED , HINDUSTAN LEVER HOUSE, 165/166 BACKBAY RECLAMATION, MUMBAI 400 020, MAHARASHTRA, INDIA. AN INDIAN COMPANY.

INVENTORS

(1)

VAN DER BEEK, MARIUS

(2)

GRAVELAND , ARIS

(3)

RJALE , GOPINATH BABSAHEB

APPLICATION NO : 1000 MUM 2000 FILED ON 08.11.2000 Priority No.99203777.0 dated 12.11.1999 of Europe

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4 , PATENTS RULES 1972 ) , PATENT OFFICE BRANCH, MUMBAI - 13.

03 CLAIMS

Process for the production of heat treated grains of cereals having:

a bulk density of 0.4 to 0.75 kg/l , preferably 0.45 to 0.65 kg/l , most preferably 0.5 to 0.6 kg/l and

adry gluten content as measured by AACC method 38-10 of 0 to 2 wt % , preferably 0 to 1 wt%, most preferably 0 to 0.5 wt% comprising subjecting the grains of the cereal to the step of heat treatment, wherein a cereal , selected from the group consisting of wheat and rye is introduced in a reactor , wherein an annular fluidized bed from the cereal grain is maintained above a perforated plate by introducing the cereal grains above the perforated plate and simultaneously introducing fluidizing gas, providing a tangential velocity component to the fluidizing bed and fluidizing gas , providing a axial velocity component to the fluidizing bed from below the perforated plate in the reactor at a temperature of 200 to 350 degree C, in which fluidized bed the cereal grain is subjected to a heat treatment for 15 to 90 sec , while avoiding local overheating and over burning.

Drawings : NIL

Comp.specn. 08 pages .

12-517G1/2002 1206

THE GAZETTE OF INDIA , MARCH 29 , 2003 ( CHAITRA 8 , 1925 )

[PART III-SEC. 2 IND . CL .

189630

108 C3 [ XXXIII ( 5 ) ]

INT . CL .

: C 21 D - 1/ 06

TITLE

: AN APPARATUS FOR THE MODIFICATION OF SURFACE HARDNESS OF STEEL

APPLICANT : INSTITUTE FOR PLASMA RESEARCH, AN INDIAN INSTITUTE OF BHAT , GANDHINAGAR 382 424, GUJARAT, INDIA

INVENTORS

(1) SUBROTO MUKHERJEE

(2) PUCADYIL ITTOOP JOHN

APPLICATION NO

407 /BOM/ 1996 FILED ON 09.08.1996

Complete after Provisional left 22.10.95

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS RULE 4, PATENTS RULES 1972) , PATENT OFFICE BRANCH , MUMBAI -13

06 CLAIMS

Anapparatus for the surface modification of steel comprising :

i) a chamber 1 having

ii) a pump 2 connected to said chamber 1 on one side thereof for creating vacuum therein,

a sample holder 3 disposed within said chamber 1 being provided to hold the sample , characterized in that

iv) a filament 5 adapted to be connected to a power source being provided near the top end of said chamber for causing an ionization of the gas to produce a plasma , v) a cusp magnetic field means having two pairs of circular solenoids 7 being provided at the bottom of said chamber to enhance the plasma density at cusp plane 6,

vi) an IGBT based switching device 9 being provided for producing pulses ,

vii) a thermocouple 8 is optionally provided with said sample holder to measure temperature and biasing the sample .

Prov. Specn 9 pages , Drgs . Nil

Comp.spech . 11 pages , Drgs . 5 sheets .

1207 THE GAZETTE OF INDIA , MARCH 29 , 2003 ( CHAITRA 8 , 1925)

PART III -SEC . 2 ]

CLAIM U/ S 20 ( 1 ) OF THE PATENTS ACT, 1970

The claim made by SIEMENS PLC , OF Siemens House , Oldbury, Bracknell , Berkshire RG12 8FZ , Eng- land, under section 20 (1 ) of the Patents Act , 1970 to proceed the application for Patent No. 189668 1324/MAS/ 95 in their name has been allowed .

OPPOSITION PROCEEDINGS

An opposition has been enteredby M/ s . Mechanical Packing Industries Pvt . Ltd. , Mumbai - 400069, to the grant of a Patent on Patent Application No. 188304 ( 127 /BOM/ 1997) made by M/s . Stoplik Services ( I ) Pvt . Ltd. , Thane- 400 604 .

An opposition has been entered by M/s . Inmarco Industrial Maintenance (P ) Ltd. , Mumbai - 400059, to the grant ofa Patent on Patent Application No. 188306 (130/ BOM/ 1997) made by M/ s . Stoplik Services (I ) Pvt. Ltd. , Thane -400604 .

PATENT SEALED ON 28-02-2003

187867 * 187875 187879 * D 187882 * 187886 * 187889 * 187894 * 187896 187904 187905 * 187906 * D 187907 * F 187908 * D 187911 * 187912 187914 * 187921 187922 187924 187925 * 187926 187927 * 187928 187929 * 187930 * 187931 187932 * 187934 187935 187937 187940 * 187941 187942 .

KOL-03 , DEL-28 , MUM- NIL , CHEN-02 .

* Patent shall be deemed to be endorsed with the words " LICENCE OF RIGHT " under Section 87 of the Patents Act , 1970 from the date of expiration of three years from the date of sealing.

*D-Drug Patents

* F= Food Patents .

[PART III-SEC . 2 * THE GAZETTE OF INDIA , MARCH 29, 2003 ( CHAITRA 8 , 1925 )

1208

REGISTRATION OF DESIGNS

The following designs have been registered . They are open for public inspection from the date of registration .

entries . The date shown in the each entries in the date or registration included in the 15-01

Class

No. 189281. Keihin Corporation, of 3-17 , Shinjuku 4- Chome , Shinjuku - Ku , Tokyo , Japan . "CARBURETOR " 25th December 2001. (Reciprocity) Japan .

23-01

Class

No. 189393. Friedrich Frohe AG & Co. KG, of Hauptastrasse 137 , D-58675 , Hemer , Germany, A German Company . " WASHBASIN MIXER" 23rd January 2002 (Reciprocity) Japan.

23-01

Class

No. 189394. Friedrich Grohe AG & Co. KG , of Hauptastrasse 137, D- 58675 , Hemer , Germany , A German Company. " SHOWER MIXER" 23rd January 2002 (Reciprocity) Japan .

23-01

Class

No. 189395. Friedrich Grohe AG & Co. KG, of Hauptastrasse 137 , D- 58675 , Hemer , Germany , A German Company. " BATH MIXER" 23rd January 2002 (Reciprocity) Japan .

19-02

Class

No. 189245. Max Co. Ltd. 6-6, Nihonbashi Hakozaki - Cho, Chuo- Ku, Tokyo, Japan . " STAPLER " 24th January 2002. (reciprocity ) Japan.

07-02

Class

No. 189687. Dart Industries Inc. , of 14901 , South Orange Blosoom trail , Orlando , Florida 32837 , U.S.A. " SEAL FOR BOWL " 7th February 2002 (Reciprocity )USA .

07-02

Class

No. 189688. Dart Industries Inc. , of 14901 , South Orange Blosoom trail , Orlando , Florida 32837 , U.S.A. " SALAD TONGS " 7th February 2002 (Reciprocity)USA.

07-02

Class

No. 189684. Dart Industries Inc. , of 14901 , South Orange Blosoom trail , Orlando , Florida 32837 , U.S.A. " SERVING BOWL " 7th February 2002 (Reciprocity)USA.

07-02

Class

No. 189689. Dart Industries Inc. , of 14901 , South Orange Blosoom trail , Orlando, Florida 32837, U.S.A. " SERVING BOWL " 7th February 2002 (Reciprocity) USA .

1209 PART III- SEC . 2]

THE GAZETTE OF INDIA , MARCH 29, 2003 ( CHAITRA 8 , 1925 )

Class 31-00 No. 189358. Whirifool Corporation of 2000 N M- 63 , Benton Harbor , Michigan 49022, U.S.A. " DOUBLE OVER FRONT PANEL & DOOR" 8th March 2002 (Reciprocity) U.S.A.

Class 10-04 No. 189253. FMI Limited, of Ferozepore Road , Ludhiana- 141001 , Punjab India . 20th June 2002 .

13-03

Class

No. 189595. Nipa International Pvt . Ltd. Of 412 Udyog Vihar, Phase- III , Gurgaon- 122016 , Haryana, India. " ELECTRICAL SWITCH MODULAR PLATE " 29th July 2002.

Class 13-03 No. 189596. Nipa International Pvt . Ltd. Of 412 Udyog Vihar, Phase- III , Gurgaon - 122016 , Haryana, India. "ELECTRICAL SWITCH MODULAR PLATE" 29th July 2002.

Class 12-16 No. 189654. Raco Industries , A-7 , Mayapuri Industrial Area , Phase- II , New Delhi - 110064, India. An Indian Proprietory firm " CAR WHEEL COVER " 2ND august 2002.

Class 26-99 No. 190001. M/s . Tri Star Engineering Industries of A/8-9 , Swaminarayan Wadi , Nr . Uttar Gujarat Patel Society , 1 , Babupura, Haripura , Asarwa, Ahmedabad- 380016 , " INSECTOCUTORS " 20th September 2002 . Gujarat, India.

Class 09-03 No. 190016. M/s . S.K. Industries (P) Ltdl . 11 /2A , Pusa Road, New Delhi , India, an Indian Company . "CAP" 24th September 2002 .

Class 09-03 No. 190017. M/s . S.K. Industries (P) Ltdl . 11 /2A, Pusa Road , New Delhi , India, an Indian Company . "CAP " 24th September 2002.

Class 09-03 No. 190018. M/s . S.K. Industries (P) Ltdl . 11 /2A, Pusa Road , New Delhi , India, an Indian Company. " CONTAINER " 24th September 2002.

Class 09-03 No. 190019. M/s . S.K. Industries (P) Ltdl . 11 /2A, Pusa Road , New Delhi , India, an Indian Company. " CONTAINER " 24th September 2002.

Class 14-03 No. 190139. M/ s . Electrocon Consumer Electronics ( I) Ltd. Of 33 , Ocean Centre , Behind Wadekar Hospital Plaghar , Dist . Thane , maharashtra - 401404 , India. " TELEPHONE " 8th October 2002.

1210

[PART III-SEC . 2 THE GAZETTE OF INDIA , MARCH 29 , 2003 ( CHAITRA 8 , 1925 )

Class 14-03 No. 190138. M/ s . Electrocon Consumer Electronics (I ) Ltd. Of 33 , Ocean Centre , Behind Wadekar Hospital Plaghar , Dist. Thane , maharashtra - 401404, India . " TELEPHONE " 8th October 2002.

Class 14-03 No. 190137. M/s . Electrocon Consumer Electronics ( 1 ) Ltd. Of 33 , Ocean Centre , Behind Wadekar Hospital Plaghar , Dist . Thane , maharashtra -401404, India . " TELEPHONE " 8th October 2002.

Class 14-03 No. 190136. M/s . Electrocon Consumer Electronics (I ) Ltd. Of 33 , Ocean Centre , Behind Wadekar Hospital Plaghar , Dist. Thane , maharashtra -401404, India . " TELEPHONE " 8th October 2002.

Class 05-05 No.: 190128. The Rishabh Velveleen Ltd. Of 9th KM, Hardwar- Delhi Road, Near Ranipur Toll Barrier , Jwalapur , Hardwar - 249407 , U.P. India . " TEXTILE FABRICS " 8th October 2002 .

Class 05-05 No. 190126. The Rishabh Velveleen Ltd. Of 9th KM, Hardwar -Delhi Road, Near Ranipur Toll Barrier , Jwalapur, Hardwar -249407, U.P. India. " TEXTILE FABRICS " 8th October 2002 .

Class -05-05 No. 190129. The Rishabh Velveleen Ltd. Of 9th KM, Hardwar - Delhi Road , Near Ranipur Toll Barrier , Jwalapur , Hardwar - 249407 , U.P. India . " TEXTILE FABRIC " 8th October 2002 .

Class -05-05 No. 190124. The Rishabh Velveleen Ltd. Of 9th KM, Hardwar - Delhi Road , Near Ranipur Toll Barrier , Jwalapur , Hardwar - 249407 , U.P. India . " TEXTILE FABRICS " 8th October 2002 .

Class -05-05 No. 190127. The Rishabh Velveleen Ltd. Of 9th KM, Hardwar - Delhi Road, Near Ranipur Toll Barrier , Jwalapur , Hardwar- 249407 , U.P. India. " TEXTILE FABRICS " 8th October 2002 .

Class 19-06 No. 190181. Micromat Industries , 95/1 , Kashipur Road, Kolkata- 700002, West Bengal , India . " PEN " 9th October 2002.

Class 07-02 No. 190326. Pravin Vasant Mehta , of 62/10 , Ganesh Industrial Estate , Tiger house , Vasai ( E) , Dist . Thane 401208 , Maharashtra , India . " CASSEROLE " 1st November 2002 .

Class 26-02 No. 190323. M/s . Deepak Enterprises , Indian Proprietory firm , 36, Sector B, Industrial Area , Sanwer Road, Indore-452003 , Madhyapradesh , India . " TORCH CABINET " 1st November 2002 .

1211 THE GAZETTE OF INDIA , MARCH 29 , 2003 ( CHAITRA 8 , 1925 )

PART III---SEC . 2]

Class 07-02 No. 190377. M/ s . Pooja Thermoware of Gala No. 18 , Kamala Bhavan, Sharma Industrial Estate , Walbhat Road, Goregaon (E) , Mumbai -400063 , Maharashtra , India. "CASSEROLE " 8th November 2002.

13-03

Class

No. 190437. Ramesh Kumar , of 10/3 , Sri Complex , B.V.K. Iyenger Road, Bangalore- 560053 , Kamataka, India. " SWITCH " 14th November 2002 .

Class 13-03 No. 190436. Ramesh Kumar , of 10/3 , Sri Complex , B.V.K. Iyenger Road, Bangalore- 560053 , Karnataka, India. " SOCKET " 14th November 2002 .

Class 13-03 No. 190435. Ramesh Kumar , of 10/3 , Sri Complex , B.V.K. Iyenger Road, Bangalore - 560053 , Karnataka, India . "D. B. SWITCH " 14th November 2002 .

Class 13-03 No. 190434. Ramesh Kumar , of 10/3 , Sri Complex , B.V.K. Iyenger Road, Bangalore - 560053 , Karnataka , India. "ELECTRICAL REGULATOR " 14th November 2002 .

Class 13-03 No. 190433. Ramesh Kumar , of 10/3 , Sri Complex , B.V.K. Iyenger Road, Bangalore - 560053 , Karnataka, India. " SWITCH " 14th November 2002 .

Class 13-03 No. 190432. Ramesh Kumar , of 10/3 , Sri Complex, B.V.K. Iyenger Road, Bangalore- 560053 , Karnataka , India. " TELEPHONE SOCKET" 14th November 2002 .

Class 13-03 No. 190440. Ramesh Kumar , of 10/3 , Sri Complex , B.V.K. Iyenger Road, Bangalore - 560053 , Karnataka, India . " FUSE " 14th November 2002.

Class 13-03 No. 190439. Ramesh Kumar , of 10/3 , Sri Complex, B.V.K. Iyenger Road, Bangalore - 560053 , Karnataka, India. "SWITCH " 14th November 2002 .

Class 13-03 No. 190438. Ramesh Kumar , of 10/3 , Sri Complex, B.V.K. Iyenger Road, Bangalore - 560053 , Karnataka , India . " SWITCH" 14th November 2002 .

1212

[PART III-SEC. 2 THE GAZETTE OF INDIA, MARCH 29, 2003 (CHAITRA 8, 1925)

Class 13-03 No. 190438. Ramesh Kumar, of 10/3 , Sri Complex , B.V.K. Iyenger Road , Bangalore-560053 , Karnataka, India . " ELECTRICAL SWITCH" 14th November 2002 .

Class 13-03 No. 190430. Ramesh Kumar , of 10/3 , Sri Complex , B.V.K. Iyenger Road, Bangalore- 560053 , Karnataka, India . " ELECTRIC BUZZER BELL" 14th November 2002 .

Class 13-03 No. 190429. Ramesh Kumar, of 10/3 , Sri Complex , B.V.K. Iyenger Road , Bangalore - 560053 , Karnataka , India . " SOCKET " 14th November 2002.

Class 13-03 No. 190428. Ramesh Kumar, of 10/3 , Sri Complex , B.V.K. Iyenger Road , Bangalore -560053 , Karnataka, India . " TELEPHONE JACK " 14th November 2002.

Class 05-05 No. 190125. The Rishabh Velveleen Ltd. of 9th KM , Hardwar- Delhi Road, Near Ranipur Toll Barrier, Jawalapur, Hardwar - 249407 , U.P. India . "TEXTILE FABRICS" 8th October 2002 .

Class 13-03 No: 190458. Kishore Industries , 143 , Ashirwad Industrial Estate , Bldg. No. 15 , Ist Floor, Ra, Mandir Road, Goregaon ( W), Mumbai -400 104, Maharashtra, India. " SWITCH SOCKET PLATE " 18thNovember 2002 .

Class 13-03 No. 190460. Kishore Industries , 143 , Ashirwad Industrial Estate , Bldg . No. 15, 1st Floor, Ra, Mandir Road, Goregaon (W) , Mumbai -400 104 , Maharashtra , India. " SWITCH SOCKET WITH INDICATOR PLATE " 18th November 2002 .

Class 13-03 No. 190463. Kishore Industries , 143 , Ashirwad Industrial Estate, Bldg . No. 15, 1st Floor, Ra, Mandir Road, Goregaon (W) , Mumbai -400 104, Maharashtra, India . " SWITCH SOCKET WITH INDICATOR " 18th November 2002 .

Class 13-03 No. 190456. Kishore Industries , 143 , Ashirwad Industrial Estate , Bldg . No. 15 , 1st Floor, Ra, Mandir Road , Goregaon ( W) , Mumbai -400 104 , Maharashtra, India. " SOCKET PLATE " 18th November 2002 .

Class 13-03 No. 190464. Kishore Industries , 143 , Ashirwad Industrial Estate, Bldg . No. 15, 1st Floor, Ra, Mandir Road, Goregaon (W) , Mumbai -400 104, Maharashtra, India . " SWITCH SOCKET COM- BINE " 18th November 2002 .

Class 13-03 No. 190461 Kishore Industries , 143 , Ashirwad Industrial Estate , Bldg. No. 15 , 1st Floor, Ra, Mandir Road, Goregaon (W) , Mumbai -400 104 , Maharashtra, India. " SWITCH WITH PLATE " 18thNovember 2002 .

Class 13-03 No. 190462. Kishore Industries , 143, Ashirwad Industrial Estate , Bldg. No. 15 , 1st Floor, Ra, Mandir Road, Goregaon (W) , Mumbai -400 104 , Maharashtra, India. " SWITCH WITH INDICA- TOR" 18th November 2002 .

Class 13-03 No. 190454. Kishore Industries , 143 , Ashirwad Industrial Estate, Bldg . No. 15 , 1st Floor , Ra, Mandir Road, Goregaon (W) , Mumbai-400 104, Maharashtra, India . " SOCKET" 18th November 2002.

Class 13-03 No. 190459. Kishore Industries , 143 , Ashirwad ludustriai Estate, Bldg . No. 15 , 1st Floor, Ra, Mandir Road, Goregaon ( W) , Mumbai -400 104, Maharasira, India . " SWITCH " 18th November 2002 .

Class 13-03 No. 190455. Kishore Industries , 143 , Ashirwad Industrial Estate , Bldg . No. 15 , 1st Floor,, Ra, Mandir Road, Goregaon ( W), Mumbai -400 104, Maharashtra, India. " SOCKET PLATE" 18th November 2002 .

Class

03 No 190483. Joshi Plastic Industries of Joshi Building , Saki Vihar Road , Mumbai -400072 , "TOOTH BRUSH" 21st November 2002 .

B. P. MISHRA

Controller General of Patents , Designs & Trade Marks

फरीदाबाद

भारत सरकार

द्वारा मुद्रित

मुद्रणालय ,

प्रबन्धक ,

दिल्ली द्वारा

2003

नियंत्रक ,

प्रकाशित ,

एवं प्रकाशन

PRINTED BY THE MANAGER , GOVERNMENT OF INDIA PRESS, FARIDABAD AND

PUBLISHED BY THE CONTROLLER OF PUBLICATIONS , DELHI , 2003