This Gazette may contains Multiple Subjects

रजिस्ट्री सं. डीएल( एन) -04/0007/2003-05 REGISTERED No. DL (N) -04/ 0007/ 2003-05 भारत का राजपत्र The Gazette of India

साप्ताहिक/WEEKLY

प्राधिकार से प्रकाशित

PUBLISHED BY AUTHORITY

नई दिल्ली, शनिवार, नवम्बर 29 दिसम्बर 5, 2003 ( अग्रहायण 8 , 1925 )

NEW DELHI , SATURDAY, NOVEMBER 29 - DECEMBER 5, 2003 ( AGRAHAYANA 8, 1925) सं० 48] No. 48]

इस भाग में भिन्न पृष्ठ संख्या दी जाती है जिससे कि यह अलग संकलन के रूप में रखा जा सके । (Separate paging is given to this Part in order that it may be filed as a separate compilation)

भाग III-खण्ड 2

[PART III- SECTION 2 ]

[पेटेन्टकार्यालय द्वारा जारी की गई पेटेन्टों और डिजाइनों से सम्बन्धित अधिसूचनाएं और नोटिस ] [Notifications and Notices Issued by the Patent Office relating to Patents and Designs ] THE PATENT OFFICE PATENTS AND DESIGNS

Kolkata , the 29th November 2003

ADDRESSES AND JURISDICTION OF THE OFFICES OF THE PATENTS OFFICE

The Patent Office has its Head Office at Kolkata and Branch Offices at Mumbai , Delhi and Chennai having Territorial Jurisdiction on a Zonal basis as shown below:-

1. Patent Office Branch, Todi Estates , IIIrd Floor, SunMill Compound , Lower Parel (West) , MUMBAI -400013 .

The States ofGujarat , Maharashtra, Madhya Pradesh and Goa and the Union Territories of Daman and Diu & Dadra and Nagar Haveli

Telegraphic Address " PATOFFICE " Phone Nos . (022 ) 2492 4058. 2496 1370 , 2492 3684 , 24903852

FaxNo.(022) 24950622, 24903852

E-mail: [email protected]

(4787)

1-347G1/ 2003

2. Patent Office Branch, W-5 , West Patel Nagar, NewDelhil 10008.

The States of Haryana , Himachal Pradesh , Jammu and Kashmir, Punjab , Rajasthan , Uttar Pradesh and Delhi and the Union Territory of Chandigarh .

Telegraphic Address " PATENTOFIC " Phone Nos . (011 ) 2587 1255 , 2587 1256 , 2587 1257 , 2587-1258 . FaxNo. (011 ) 2587 1256. E-mail:[email protected]

3. Patent Office Branch .. Guna Complex, 6th Floor , Annex- II , 443 , Annasalai , Teynampet , Chennai-600018 .

The States of Andhra Pradesh , Kamataka, Kerala, Tamil Nadu and Pondicherry and the Union Territories of Laccadive , Minicoy and Aminidivi Islands .

4788

[PART III-SEC . 2

THE GAZETTE OF INDIA, NOVEMBER 29 , 2003 ( AGRAHAYANA 8 , 1925 )

Phone Nos. (044) 2431 4324/4325/4326 .

FaxNo. (044) 2431 4750/4751 .

Telegraphic Address " PATENTOFFIC " E- mail : patentchennai @vsnl . net

4. Patent Office ( Head Office) , Nizam Palace , 2nd M.S.O. Building, 5th, 6th & 7th Floor, 234/4 , Acharya Jagadish Bose Road, Kolkata-700020 .

Restof India,

Telegraphic Address " PATENTS " Phone No. (033) 2247 4401/4402/4403 .

पेटेंट कार्यालय

एकस्व तथा अभिकल्प

कोलकाता, दिनांक 29 नवम्बर 2003

पेटेंट कार्यालय के कार्यालयों के पते एवं क्षेत्राधिकार पेटेंट कार्यालय का प्रधान कार्यालय कोलकाता में अवस्थित है तथा मुम्बई, दिल्ली एवं चेन्नई में इसके शाखा कार्यालय हैं, जिनके प्रादेशिक क्षेत्राधिकार जोन के आधार पर निम्न रूप में प्रदर्शित हैं: --

1. पेटेंट कार्यालय शाखा, टोडी इस्टेट, तीसरा तल, सनमिल कम्पाउंड, लोअर परेल ( वेस्ट) , मुम्बई - 400 013 |

गुजरात, महाराष्ट्र, मध्य प्रदेश तथा गोआ राज्य क्षेत्र एवं संघ शासित क्षेत्र, दमन तथा दीव एवं दादर और नगर हवेली ।

तार पता : " पेटोफिस"

फोन:(022) 24924058 , 2496 1370, 2490 3684, 2490 3852 फैक्स: (022 ) 2495 0622, 2490 3852

ई. मेल: [email protected]

2. पेटेंट कार्यालय शाखा,

डब्ल्यू-5 , वेस्ट पटेल नगर, नई दिल्ली 1100081

हरियाणा, हिमाचल प्रदेश, जम्मू तथा कश्मीर, पंजाब , राजस्थान, उत्तर प्रदेश तथा दिल्ली राज्य क्षेत्रों एवं संघ शासित क्षेत्र चंडीगढ़ ।

तार पता :" पेंटेंटोफिक" फोन: (011 ) 2587 1255 , 2587 1256, 2587 1257 , 2587 1258 .

फैक्स: ( 011 ) 2587 1256:

ई. -मेल: [email protected]

Fax No. (033 ) 22473851 , 2240 1353. E-mail: patentin@ vsnl.com patindia@ giascl01.vsnl.net.in

Website : http: /Ipindia.nic.in

All applications , notices , statements or other docuinents or any fees required by the Patents Act , 1970 and the Patents (Amendment) Act, 2002 or by the Patents Rules , 2003 willbe received only at the appropriate offices of the Patent Office .

Fees: Thefees may either be paid in cash or may be sent by Bank Draft or Cheques payable to the Controller of Patents drawn on a scheduled Bank at the place where the appropriate office is situated.

3. पेटेंट कार्यालय शाखा, गुना कम्प्लेक्स, छठा तल , एनेक्स II , 443 , अन्नासलाई , तेनामपेट, चेन्नई - 600018 ।

आन्ध्र प्रदेश, कर्नाटक , केरल, तमिलनाडु तथा पाण्डिचेरी राज्य क्षेत्र एवं संघ शासित क्षेत्र लक्षद्वीप , मिनिकाय तथा एमिनिदिवि द्वीष । तार पता - " पेटेंटोफिक " फोन : (044) 2431 4324/4325/4326 . फैक्स: ( 044) 2431 4750/4751 . ई -मेल : [email protected]

4. पेटेंट कार्यालय ( प्रधान कार्यालय ) , निजाम पैलेस, द्वितीय बहुतलीय कार्यालय भवन, 5वां , 6ठा व 7वां तल, 234/4, आचार्य जगदीश बोस मार्ग , कोलकाता - 700 0201

भारत का अवशेष क्षेत्र ।

तार पता - " पेटेंट्स" फोन: (033) 2247 4401/4402/4403 . फैक्स: (033 ) 2247 3851 , 2240 1353 .

ई. -मेल : [email protected] [email protected]

वेब साइट : http:/Ipindia.nic.in

पेटेंट अधिनियम, 1970 तथा पेटेंट ( संशोधन ) अधिनियम, 2002 अथवा पेटेंट नियम, 2003 द्वारा अपेक्षित सभी आवेदन, सूचनाएं, विवरण या अन्य दस्तावेज या कोई फीस पेटेंट कार्यालय के केवल समुचित कार्यालय में ही ग्रहण किए जाएंगे ।

शुल्क : शुल्कों की अदायगी या तो नकद की जाएंगी अथवा जहां उपयुक्त कार्यालय अवस्थित हैं , उस स्थान के अनुसूचित बैंक से नियंत्रक, पेटेंट को भुगतान योग्य बैंक ड्राफ्ट अथवा चैक द्वारा की जा सकती है । PART III-SEC . 2] THE GAZETTE OF INDIA , NOVEMBER 29 , 2003

4789

( AGRAHAYANA 8 , 1925)

Special Notice

All the patent applications filed upto 30th April , 2002 other than those.-

a. for which secrecy directions have been imposed and continued under Section 35 ;

b . applications along with provisional specifications deemed to have been abandoned under section9 ( 1 ) before 20th May , 2003 ;

c. applications deemed to have been abandoned under Section 21 ( 1 ) before 20th May, 2003;

d. applications which have been refused under Section 15 before 20th May, 2003; and

e. applications which have been withdrawn before 18 months from the date of filing or the date of priority as the case may be ,

shall be deemed to have been published under Section 11A of the Patents Act, 1970 as amended.

The particulars of the applications together with provisional and/or complete specifications and abstracts may be inspected in the appropriate office.

[PART III- SEC . 2 THE GAZETTE OF INDIA , NOVEMBER 29 , 2003 ( AGRAHAYANA 8 , 1925 )

4790

Application for Grant of Exclusive Marketing Right (EMR)

An application for grant of EMR bearing No. EMR/2/2003 on " A combination kit used for the Treatment ofMalaria " is filed by " Nicholas Piramal India Limited ", Mumbai -400012 and "Council of Scientific and Industrial Research . ", New Delhi - 110 001. on 16/10/2003 against corresponding ratent application No. 501/ MUM/2000 dated 31st May, 2000.

An application for grant of EMR bearing No. EMR/3 / 2003 on " Tetracyclic Derivatives , process for Preparation and use " is filed by " Eli Lilly and Company " , USA. on 10/10/2003 against corresponding patent application No. 85 / DEL/ 1995 dated 23rd January, 1995 .

ALTERATION OF DATE UNDER SECTION - 16

191372 ( 609/ CAL/ 2001 ) ANTE - DATED TO 28TH NOVEMBER , 1996 .

अभिगृहित पूर्ण विनिर्देश

एतद्वारा सूचना दी जाती है कि आवेदनों में किसी पर पेटेंट अनुदान का विरोध करने वाले इच्छुक व्यक्ति राजपत्र के इस निर्गमन की तिथि से चार महीने के भीतर या उक्त चार महीने की समाप्ति के पूर्व, प्ररूप 4 में यदि आवेदित किया हुआ हो, तो परवर्ती एक महीने के भीतर, किसी समय , नियंत्रक, पेटेंट को ऐसे विरोध की सूचना प्ररूप 7 में उपयुक्त कार्यालय में दे सकते हैं । विरोध का लिखित कथन साक्ष्य के साथ , यदि कोई हो, दो प्रतियों में उक्त सूचना के साथ या अगले दो महीने की अवधि के भीतर दाखिल किया जाए । इस संदर्भ में , यथासंशोधित पेटेंट अधिनियम , 1970 की धारा 25 एवं पेटेंट नियम, 2003 के नियम 55 से 57 का अवलोकन किया जा सकता है । उपयुक्त कार्यालय द्वारा विनिर्देश एवं चित्र आरेख, यदि हो , के छायाप्रति की आपूर्ति छायाप्रति शुल्क के रूप में प्रति पृष्ठ रु. 4/ - की अदायगी पर की जा सकती है ।

COMPLETE SPECIFICATION ACCEPTED

Notice is hereby given that any person interested in opposing the grant of a Patent on any of the Applications , may, at any time within four months from the date of this issue of Gazette or within further period of one month if applied for in Form 4 before the expiry of the said period of four months , give notice to the Controller of Patents at the Appropriate Office on Form 7 of such opposition. The Written Statement of Opposition accompanied by evidence , if any , should be filed in duplicate alongwith the said notice or within further period of two months , Section 25 of The Patents Act , 1970 as amended and Rules 55 to 5% of The Patents Ruies , 2003 may be referred to in this regard .

Photo copies of the specification and drawings , if any, can be supplied by the Appropriate Office on payment of photocopying charges @ Rs . 4/ - per page .

4791 THE GAZETTE OF INDIA , NOVEMBER 29 , 2003 ( AGRAHAYANA 8 , 1925)

PART III-SEC . 2 ]

191351

170D

IND . CL.

C 11 D 1/00

INT. CL .

IMPROVED DETERGENT BAR COMPOSITION .

TITLE :

HINDUSTAN LEVER LIMITED. ,

APPLICANT

HINDUSTAN LEVER HOUSE,

165/166 BACKBAY RECLAMATION , MUMBAI - 400 020 . MAHARASHTRA , INDIA .

1. ATUL BHATI

INVENTORS

2. DEVARAKONDA SAIKRISHNA

3. VINEET MITAL

4. RAVI HARIKIRAN

INTERNATIONAL :

APPLICATION NO .

756/BOM/ 1998 DATED 26/11/1998

INDIAN :

APPLICATION NO .

COMPLETE SPECIFICATION FILED AFTER PROVISIONAL SPECIFICATION DATED 22/11/1999

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES 2003 ) , PATENT OFFICE BRANCII , MUMBAI - 13.

10 CLAIMS

1. A detergent composition comprising

i) 40 to 85% soap

ii ) 0.1-10% branched chain non - ionic surfactant and

iii ) other conventional ingredients .

Drawings : Nit Sheets 10 Pages

Provisional Specification :

Drawings : Nil Sheets 12 Pages

Complete Specification :

4792

THE GAZETTE OF INDIA . NOVEMBER 29 , 2003 ( AGRAHAYANA 8 , 1925 ) [PART III -SEC . 2 IND . CL .

191352

126 ( C)

INT . CL .

G 06 F 001/26

TITLE

AN ELECTRONIC DEVICE REGULATING EXCESSIVE USE OF ELECTRICAL ENERGY .

APPLICANT

RATNESH VARMA & SUMIT KABRA ,

PARTNERS OF R.K.ELECTRONICS & DEVICES ,

MAIN ROAD GOLE GANJ

CHHINWADA ,

PIN - 480001 , MADHYA PRADESH , INDIA .

INVENTORS :

RATNESII VARMA & SUMIT KABRA .

INTERNATIONAL : APPLICATION NO .

INDIAN

19/BOM/ 1999 DATED 08/01/1999

APPLICATION NO . :

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES 2003 ) , PATENT OFFICE BRANCII , MUMBAI - 13 .

03 CLAIMS

1 . An electronic device regulating the excessive use of electrical energy comprising a current transducer communicating to a number of sensing circuits which differentiate different types output load and transfers the references of the load current to a measurable signal inputed to a logic circuit consisting of comparators with amplifiers connected to a microprocessor , the said logic circuit bi -directionally connected to a test signal generator module , an alarm sending module , and also the said logic circuit is communicable with a contactor switch through the said signal generating module , alarm generating module and alarm sending module to control the power supply by means of operation of the said contactor .

Complete Specification : 04 Pages

Drawings : 01 Sheets 4793 THE GAZETTE OF INDIA , NOVEMBER 29 , 2003 ( AGRAHAYANA 8 , 1925)

PART III -SEC . 2 ]

191353

IND . CL .

170 D

INT . CL .

C 07 D 3/00

TITLE

A SOLID DETERGENT COMPOSITION

APPLICANT

HINDUSTAN LEVER LIMITED. ,

HINDUSTAN LEVER HOUSE ,

165/166 BACKBAY RECLAMATION , MUMBAI - 400 020 . MAHARASHTRA , INDIA.

INVENTORS

1. PULLIMUDALIAR SIDHESWARAN .

2. DEVADATTA SHIVAJI SAHKHOLKAR .

INTERNATIONAL :

APPLICATION NO .

INDIAN

783/BOM/ 1998 DATED 02/12/1998

APPLICATION NO .

COMPLETE SPECIFICATION FILED AFTER PROVISIONAL SPECIFICATION

DATED 29/11/1999

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES 2003 ) , PATENT OFFICE BRANCH , MUMBAI - 13 .

07 CLAIMS

1 ) A solid detergent composition suitable for cleaning laundry or hard surface which comprises:

i) from 1.5-50wt% of detergent active selected from anionic , nonionic , cationic and zwitterionic detergent actives or mixtures thereof, having at least an anionic surfactant being chosen from water- soluble sulphates , sulphonates , esters ' having in the molecular structures an alkyl radical containing from 8-22 carbon atoms and a radical chosen from sulphonic acid or sulphuric acid ester radicals and mixtures thereof;

ii) 0.05-10wt% of gum ghatti .

Drawings : Nil Sheets 16 Pages

Provisional Specification :

20 Pages

Complete Specification :

Drawings : Nil Sheets 4794

THE GAZETTE OF INDIA , NOVEMBER 29 , 2003 ( AGRAHAYANA 8 , 1925 ) [PART III-SEC . 2 IND . CL .

191354

32 F 2 a 55 E 4

INT . CL .

C 07 C 101/34

A 61 K 31/195

TITLE

A PROCESS FOR THE PREPARATION OF NOVEL STABLE CRYSTAL FORM OF N-( TRANS - 4 - ISOPROPYLCYCLOHEXYL CARBONYL) -D - PHENYLALANINE

APPLICANT

ALEMBIC LIMITED , ALEMBIC ROAD , VADODARA - 390 003 GUJARAT , INDIA , AN INDIAN CO ..

INVENTORS

1. VRAJESH SHAH

2. ANURAG HITKARI

3. KESHAV DEO

4. SRINIVASAN RENGARAJU

INTERNATIONAL :

APPLICATION NO .

INDIAN

872/MUM/ 2001 DATED 12/09/2001

APPLICATION NO .

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES 2003 ) , PATENT OFFICE BRANČII , MUMBAI - 13 .

03 CLAIMS .

1 ) A process for preparing a novel stable crystal form of N- ( trans --4- isopropylcyclohexyl ) -D - phenylalanine having melting point at 174 " to 178 ° C and X- ray diffraction pattern as shown in figure2 and infra red absorption spectrum as shown in figure 3 , from N- (trans - 4 - isopropylcyclohexylcarbonyl ) -D- phenylalanine characterized in that : -

-said N- ( trans - 4 - isopropylcyclohexyl ) -D - phenylalanine is dissolved in a solvent selected from the group comprising acetonitrile , dimethylformamide , and dimethyl acetamide at a temperature in the range of 60-75 ° C to form a solution ,

-said solution is precipitated by cooling to a temperature of 28° C to 35° C , the said precipitated solution is crystallized to obtain the desired crystais at a temperature of 30°C to 75° C.

Complete Specification : 13 Pages

Drawings : 08 Sheets 4795 PART III-SEC . 2] THE GAZETTE OF INDIA , NOVEMBER 29 , 2003 ( AGRAHAYANA 8 , 1925)

191355

IND . CL .

108 C 2 [ XXX111 (5 ) ]

C 22C, 38/00

INT . CL .

TITLE

AN IMPROVED PROCESS FOR MAKING STEEL IN THE ELECTRIC ARC FURNACE ( EAF) .

APPLICANT

DR.SHILOWBHADRA BANERJEE, HI RIVIRESA ; 287/3 BANER ROAD , BANER; PUNE 411 045 , MAHARASHTRA, INDIA , AN INDIAN NATIONAL

IDEM

INVENTORS

INTERNATIONAL :

APPLICATION NO .

653/BOM/ 1998 DATED 12/10/1998

INDIAN

APPLICATION NO .

COMPLETE SPECIFICATION FILED AFTER PROVISIONAL SPECIFICATION

DATED 26/02/1999

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES 2003 ) , PATENT OFFICE BRANCH , MUMBAI - 13.

17 CLAIMS

1) A process for making steel in an electric arc furnace using molten high carbon ferrous metal as a part of a charge mixture , the process comprising the steps of:

a) providing a molten charge which is a melt comprised of a high carbon ferrous metal in the electric arc furnace by one of preparing the melt in the electric arc furnace or introducing the melt into the electric arc furnace or introducing the melt into the electric arc furnace , the high carbon ferrous metal comprising less than 3 % carbon , less than 0.2% silicon , and less than 0.2% manganese , and the melt having a temperature of at least 1375 ° C;

b) adding to the molten charge provided in the electric arc furnace a solid metallic charge comprised of at least one material selected from the group consisting of scrap steel , hot briquetted iron, direct reduced iron , and iron ore to provide a charge mixture;

c) refining the charge mixture by melting the charge mixture in the absence of gaseous oxygen to provide a moltel steel ; and

d) superheating, finishing and tapping the molten steel into a ladle for subsequent casting thereof.

Drawings : Nil Sheets 19 Pages

Provisional Specification :

Nil Sheets

Drawings :

26 Pages

Complete Specification :

2--347 G1/2003 4796

[PART III- SEC . 2 THE GAZETTE OF INDIA, NOVEMBER 29 , 2003 ( AGRAHAYANA 8 , 1925 )

IND . CL .

191356 26 [XLIII ( 1 ) ]

INT . CL .

A 46 B 1/00

TITLE :

UNITARILY MOLDED TOOTHBRUSH

APPLICANT

HINDUSTAN LEVER LIMITED . ,

HINDUSTAN LEVER HOUSE ,

165/166 BACKBAY RECLAMATION , MUMBAI - 400 020.

MAHARASHTRA , INDIA .

INVENTORS :

ROBERT ALFRED BENNETT

INTERNATIONAL :

APPLICATION NO .

INDIAN :

379/BOM/ 1998 DATED 16/06/1998

APPLICATION NO .

PRIORITY NO . : 60/049721 DATED 16/06/1997 OF USA . 09/018987 DATED 05/02/1998 OF USA .

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES, 2003 ) , PATENT OFFICE BRANCH , MUMBAI - 13 .

08 CLAIMS

1. Aunitarily molded toothbrush comprising :

a head with bristles integrally formed with the head;

a neck with first and second ends , the first end connected to the head ; and a handle with front and rear ends , the front end connected to the second end of the neck , at least one recess within the handle having a recess opening on an undersurface thereof said opening facing in a direction opposite to which bristle project, wherein the head , neck and handle are unitarily molded with plastic material having a Melt Index not lower than 6 g/ 10 min so as to provide ready moldability and to provide flexible bristles and a relatively rigid handle .

Fig.1.

16 10, 14 Complete Specification : 14 Pages

Drawings : 03 Sheets PART III -SEC . 2]

4797 THE GAZETTE OF INDIA , NOVEMBER 29, 2003 ( AGRAHAYANA 8 , 1925 )

IND . CL .

170D

191357 :

INT . CL .

C 11 D 17/00

TITLE

IMPROVED DETERGENT COMPOSITION WITH CATIONIC COMPOUNDS .

APPLICANT

HINDUSTAN LEVER LIMITED . ,

HINDUSTAN LEVER HOUSE, 165/166 BACKBAY RECLAMATION , MUMBAI - 400 020 . MAHARASHTRA , INDIA .

INVENTORS :

1. WINSTON ANTHONY PEREIRA 2. MEENA RAJAN.

INTERNATIONAL :

APPLICATION NO .

802/BOM/ 1998 DATED 10/12/1998

INDIAN

APPLICATION NO .

COMPLETE SPECIFICATION FILED AFTER PROVISIONAL SPECIFICATION DATED 08/12/1999

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES 2003 ) , PATENT OFFICE BRANCH , MUMBAI - 13 .

07 CLAIMS

1 . Adetergent composition comprising:

(i) from 0.01 to 2wt% of a cationic disinfectant compound , selection from the group consisting of benzalkonium chloride , didecyl methyl benzyl ammonium chloride , didecyl dimethyl ammonium chloride and didecyl methyl propyl ammonium chloride ;

from 5 to 40 wt% of surfactant of which at least 10% is inionic ;

(ii)

(iii) from 0.1 to 5 wt% of an anionic polymer ,

and other conventional ingredients to 100 wt% .

Drawings : Nil Sheets

14 Pages

Provisional Specification :

Drawings : Nil Sheets

16 Pages

Complete Specification :

4798

PART III SEA.2 THE GAZETTE OF INDIA , NOVEMBER 29 , 2003 ( AGRAHAYANA 8. 1925 )

191358 Indian Classification :

32 F2

C07C 135/00

International Classification'

Title

" A PROCESS FOR PREPARING N- [ 4- ( 3,4 - DICHLOROPHENYL) -3.4- DIHYDRO - 1 ( 2H ) -NAPTHALENYLIDENE ] METHANEAMINE . "

Applicant

PFIZER PRODUCTS INC . , a corporation organized under the laws of the state of Connecticut. United States of America , of Eastern Point Road , Groton , Connecticut 06340 , United States of America .

Inventors

JUAN CARLOSE COLBERG - U.S. DAVID MICHAEL PFISTERER- U.S . GERALDINE PATRICIA TABER - U.S.

Application for Patent Number 84/Del/ 99 filed on 14th Jan. 99 .

Convention klate 16.1.1998/ 60/071,600/ U.S.A

Appropriate office for opposition proceedings (Rule 4, Patents Rules , 2003 ) Patent Office Branch , New Delhi - 110 005 .

( 9 Claims )

process for preparing N- [ 4- ( 3,4 - dichlorophenyl ) -3,4 - dihydro - 1 ( 2H ) -napthalenylidene}

NCH,

A methaneamine , depicted below:

comprising reacting 4- ( 3,4- dichlorophenyl) -3,4 - dihydro- 1 (2H) -napthalenone, depicted below:

with monomethylamine at a temperature in the range of 50° C to 120° C and a pressure in the range of atmospheric pressure to 100 psig , in an alcohol solvent selected from primary , secondary and tertiary straight or branched (C1 -C6 ) alkanols and other alcohols having a boiling point, under reaction conditions , that is greater than 55 ° C, and which monomethylamine is soluble .

(Complete Specification 21 Pages ; Drawings Nil Sheets ) 4799 THE GAZETTE OF INDIA . NOVEMBER 29 , 2003 ( AGRAHAYANA 8 , 1925 )

PART III- SEC . 2 ]

32 C

191359 Indian Classification :

International Classification¹ :

A 01 N 063/00 ; A01 N 055/00 ; A 01 N 037/18 ; C 12 P 021/06 .

Title

" A PROCESS FOR PREPARING A CELL CULTURE COMPOSITION" .

Applicant

NATIONAL INSTITUTE OF IMMUNOLOGY, an Indian registered body incorporated under the Registration of Societies Act (Act XXI of 1860 ) , Aruna Asaf Ali Marg, New Delhi - 110067 , INDIA .

Inventors :

SHAKTI NATH UPADHYAY VIKAS MADAN - BOTH INDIAN .

Application for Patent Number 607 /DEL/99 filed on 20/04/1999 . Complete left after Provisional specification filed on 20/07/2000.

Appropriate office for opposition proceedings (Rule 4, Patents Rules , 2003 ) Patent Office Delhi Branch , New Delhi - 110 008 .

(08 Claims )

Aprocess for preparing a cell culture composition, said process comprising :

a . preparing a protein enriched extract from the plant parts of Tinospora cordifolia in a manner such as hereindescribed,

b. mixing 0.1 to 100µg/ ml of the extract with a mammalian culture medium such as hereindescribed to obtain the composition .

(Provisional specification 11 Pages Drawing NIL Sheet ) (Complete Specification 18 Pages Drawing 04 Sheets ) 4800

[PART III- SEC . 2 THE GAZETTE OF INDIA, NOVEMBER 29 , 2003 ( AGRAHAYANA 8 , 1925)

32F

Indian Classification :

191360 International Classification'

:

A61K 31/185 C07C 57/02

Title

" AN IMPROVED PROCESS FOR THE PREPARATION OF 2-ARYL PROPIONIC ACIDS . "

Applicant

COUNCIL OF SCIENTIFIC AND INDUSTRIAL RESEARCH , Rafi Marg, New Delhi 110 001 , INDIA , an Indian body incorporated under the Registration of Societies Act (XXI of 1860) .

Inventors

RAGHUNATH VITTHAL CHAUDHARI - INDIAN SEAYAD ABDUL MAJEE--- INDIAN JAYASREE SEAYAD - INDIAN

Application for Patent Number 635 /Del/99 filed on 23rd April 1999 .

Appropriate office for opposition proceedings (Rule 4 , Patents Rules , 2003 ) Patent Office Branch , New Delhi - 110 008 .

( 13 Claims )

An improved process for the preparation of 2 - aryl propionic acids which comprises reacting an olefin having the general formula I RR

Formuja i

wherein R₁ may be aryl , substituted aryl , naphthyl or substituted naphthyl , R2 , R3 R4 R5 may independently be hydrogen , alkyi , aryl , aryl alkyl , cyclo aliphatic with or without substituents , a halide source , selected from the group consisting of halide salts or hydrohalic acid a protonic acid such as herein described water , hetrogenous palladium or platinum metal as catalyst and phosphine ligand in an organic solvent such as herein described in the carbon monoxide atmosphere in an autoclave at a temperature ranging between 30 to 130 C , for a period ranging between 50 to 1500 psig , cooling the reaction mixture to ambient temperature , flushing the autoclave with nitrogen, separating the catalyst, removing the solvent by conventional methods and isolating the 2- aryl propionic acid of the formula II

R-C-R

R.-C-R

COOH

Formula II 4801 THE GAZETTE OF INDIA . NOVEMBER 29 , 2003 ( AGRAHAYAÑA 8 , 1925 )

PART 111 --SEC . 2 ]

wherein R , may be aryl , substituted aryl , napthyl or substituted npthyl , R2 , R3 , R4 and Rs may independently be hydrogen , alkyl , aryl , arylalkyl , cycloaliphatic with or without substituents .

(Complete Specification 34 Pages Drawings 1 Sheet )

191361

17 A3

Indian Classification

A23L 2/84

International Classification '

Title

"AN IMPROVED PROCESS FOR THE PREPARATION OF BRIGHT JUICES FROM NONCITRUS FRUITS . "

Applicant

COUNCIL OF SCIENTIFIC AND INDUSTRIAL RESEARCH, Rafi Marg , New Delhi 110 001 , INDIA , an Indian body incorporated under the Registration of Societies Act (XXI of 1860) .

Inventors

SUBHABRATA SENGUPTA - INDIAN ANIL KUMAR GHOSH INDIAN DEBABRATA SENGUPTA - INDIAN MOHAN LAL JANA - INDIAN AMAL KUMAR NASKAR - INDIAN

Application for Patent Number 736/Del/99 filed on 14th May 99.

Appropriate office for opposition proceedings (Rule 4, Patents Rules , 2003 ) Patent Office Branch, New Delhi - 110008 .

( 4 Claims )

An improved process for the preparation of bright juices from noncitrus fruits which comprises extracting the juice from noncitrus fruits from by known methods , filtering by known methods , mixing an ezyme composition containing a mixture of 5 to 10 units pectinase and 40 to 60 units /ml xylanase obtained from an edible mushroom Termitomyces clypeatus , incubating at a temperature in the range of 20 ° to 60 ° C for a periods of 15 minutes to 6 hours , followed by filtering the resulting mixture by known methods to obtain bright juice .

(Complete Specification 10 Pages Drawings Nil Sheet ) 4802

THE GAZETTE OF INDIA , NOVEMBER 29 , 2003 (AGRAHAYANA 8, 1925) [PART III- SEC . 2 Indian Classification :

55 E

191362

International Classification ' :

C07J 63/00 A61K 31/00

Title

" A PROCESS FOR THE MANUFACTURE OF OXIMINO BETULINIC ACID DERIVATIVE . "

Applicant

DABUR RESEARCH FOUNDATION , of the address 22, Site IV, Sahibabad , Ghaziabad Uttarpardesh 201010 , India , an Indian Company registered, under the Companies Act 1956.

Inventors

SUNDER RAMADOSS - INDIAN

MANU JAGGI - INDIAN MOHAMMAD JAMSHED AHMED SIDDIQUI - INDIAN

ACHIA BEHI KHANNA - INDIAN

Application for Patent Number 932/Del/99 filed on 30th JUNE 1999 .

Appropriate office for opposition proceedings (Rule 4, Patents Rules, 2003 ) Patent Office Branch , New Delhi - 110008 .

( 4 Claims )

A process for preparation of oximino betulinic acid derivative of structure formula (6);

wherein, R = H; R₁ = H or Br ; R2 = N - OCH2CH6H4NO2 , NNHCOC6H4CI , NNHC6H4Br , O orNOH AND R3 = H OR COCH=CH2

which comprises refluxing oxo dihydrobetulinic acid with hydroxylamine hydrochloride and its derivatives in presence of sodium acetate and alcoholic solvent for a few hours to form a reaction mixture , evaporating the said reaction mixture under reduced pressure to dryness and stirring the residue obtained with cold water , separating the crude solid by filtration and recrystallizing with alcoholic solvent to form the desired oximino betulinic acid derivative of structural formula (6) .

(Complete Specification 19 Pages Drawings Nil Sheets ) 4803 PART III- SEC . 2]

THE GAZETTE OF INDIA , NOVEMBER 29 , 2003 ( AGRAIIAYANA 8. 1925 )

191363

32C

Indian Classification :

: A 61 K 35/78 .

International Classification +

Title

" A PROCESS FOR THE PREPARATION OF A SYNERGISTIC HERBAL COMPOSITION USEFUL FOR TREATMENT OF DRUG RESISTENT BACTERIAL INGECTIONS " .

Applicant

DABUR RESEARCH FOUNDATION , an Indian Company formed and incorporated under the Companies Act , 1956 and having its office at 22, Site IV , Sahibabad . Gaaziabad 201 010. INDIA .

Inventors

NARASIMHA BABA BRINDAVANAM CHANDRA KANT KATIYAR DASALUKUNTE BHIMRAO ANANTA NARAYANA- ALL INDIAN .

Application for Patent Number 1260 / DEL/99 filed on 17/09/1999 Complete left after Provisional specification filed on 28/09/2000.

Appropriate office for opposition proceedings ( Rule 4. Patents Rules . 2003 ) Patent Office Delhi Branch , New Delhi - 110 008 .

(14 Claims )

A process for the preparation of a synergistic herbal composition useful for treatment of drug resistant bacterial infections comprising the steps of :

a) preparing a solvent extract from a neem plant in a manner such as hereindescribed . the extract being substantially free of Azadirachtin. containing bitter principles upto 9% and pH adjusted between 6 to 0.5 . and optionally drying the extract, and

b) mixing 100 to 600 mg of the extract with a predetermined amount of antibiotic drug to obtain the herbal composition .

( Provisional specification 23 Pages Drawing NIL Sheet )

( Complete Specification 52 Pages Drawing NIL Sheet )

3-347 GI/2003 [PART III- SEC . 2 4804

THE GAZETTE OF INDIA , NOVEMBER 29, 2003 ( AGRAHAYANA 8 , 1925)

191364

55E4

Indian Classification :

A 61 K 31/00 .

International Classification :

Title

" A PROCESS FOR THE ISOLATION AND PURIFICATION OF PROTEIN P17 OF HIV - 1 SUBTYPE B " .

Applicant

UNIVERSITY OF DELHI SOUTH CAMPUS , DEPARTMENT OF BIOCHEMISTRY , BENITO JUAREZ , NEW DELHI - 110 021 , INDIA

Inventors

SANJAY GUPTA KAJAL ARORA AMITA GUPTA VIJAY KUMAR CHAUDHARY - ALL INDIAN Application for Patent Number 1476/DEL/ 99 filed on 12/11/1999

Appropriate office for opposition proceedings (Rule 4, Patents Rules , 2003 ) Patent Office Delhi Branch , New Delhi - 110 008 .

(02Claims)

A process for the isolation and purification of higher yield of protein p17 of HIV- 1 (subtype B) ( a non living protein) for use in diagnostics and therapeutics ofAIDS comprising:

step(1)- isolaring and sequencing gag gene from p17 (B) from known sources as herein described by conventional methods preferably polymerase chain reaction (PCR) :

step( ii) - ⚫transforming E.coli with an expression vector PVNLP17B220 obtainedby cloning of said p17 (B ) gene into T7 promoter based expression vector for expressing p17 (subytpe B) ;

step(iii)- centrifuging the transformed E.coli cells and isolating p17 protein by known methods ,

step(iv) -purifying at a temperature between 2-8 ° C the said protein by column chromatography method consisting of SP - Sepharose cation exchange column , Toyobutyl hydrophobic column, followed by Macroprep - S cation exchange column and Sepharcryl S - 200 gel filtration column to get higher yields of proteinp17.

(Complete Specification Pages 14 Drawing 05 Sheets ) 4805 THE GAZETTE OF INDIA, NOVEMBER 29 , 2003 ( AGRAHAYANA 8 , 1925 )

PART INI SEC . 2 ]

191365

55E4

Indian Classification

A 61 K 31/00 ; A 61 K 39/00 .

International Classification¹

Title

"A PROCESS FOR THE ISOLATION AND PURIFICATION OF PROTEIN P24 OF HIV - 1 SUBТУРЕ С " .

Applicant

UNIVERSITY OF DELHI SOUTH CAMPUS , DEPARTMENT OF BIOCHEMISTRY , BENITO JUAREZ , NEW DELHI - 110 021 , INDIA

Inventors

SANJAY GUPTA KAJAL ARORA AMITA GUPTA VIJAY KUMAR CHAUDHARY - ALL INDIAN

Application for Patent Number 1478 /DEL/ 99 filed on 12/11/1999

Appropriate office for opposition proceedings (Rule 4, Patents Rules , 2003 ) Patent Office Delhi Branch , New Delhi - 110 008 .

(02Claims)

Aprocesscess for the isolation and purification of protein p24 of HIV - 1 (subtype C) (a non living protein) for use in diagnostics and therapeutics of AIDS comprising:

step( i)- isolating gag gene from p24 ( C ) from known sources as herein described by conventional methods preferably polymerase chain reaction (PCR),

step( ii)- transforming E.coli with an expression vector pVCNLP24C210 obtained by cloning of said p24 ( C ) gene into T7 promoter based expression vector for expressing p24 (C)

step ( iii) - centrifuging the transformed E.coli cells and isolating p24(C ) protein by known methods ,

step (iv)-purifying at a temperature between 2-8 ° C p24( C ) protein by column chromatography method consisting of Q-Sepharose anion exchange column followed by SP -Sepharose cation exchange column to get higher yields of protein p24(C)

Pages 17 Drawing 04 Sheets )

(Complete Specification [PART III-SEC . 2 THE GAZETTE OF INDIA . NOVEMBER 29 , 2003 (AGRAHAYANA 8 , 1925)

4806

191366

32F (3d)

Indian Classification

C07C 63/34

International Classification '

Title

"AN IMPROVED PROCESS FOR THE PREPARATION OF 48- SUBSTITUTED EPIPODOPYLLOTOXINS. " Applicant

COUNCIL OF SCIENTIFIC AND INDUSTRIAL RESEARCH , Rafi Marg , New Delhi 110 001 , INDIA, an Indian body incorporated under the Registration of Societies Act (XX1 of 1860 ) .

Inventors

AHMED KAMAL INDIAN NALLAN LAXMAN - INDIAN GUJJAR RAMESH - INDIAN

Application for Patent Number 0084 /Del/2000 filed on 3rd Feb. 2000.

Appropriate office for opposition proceedings (Rule 4, Patents Rules . 2003 ) Patent Office Branch, New Delhi - 110 008.

( 8 Claims )

An improved process for the preparation of 48 - substituted epipodopyllotoxins of the formula 1

wherein X is NH, S , O and R is OH and OMe which comprises , reacting podophyllotoxin of formula 2

with sulphonic acid- sodium iodide reagent in aprotic solvents at a temperature ranging between 0° 50° C for a period in the range of 20 min to 5 hrs, reacting the obtained 48 iodised compound with aryl compound such as herein described with known inorganic bases as defined herein at a temperatuire ranging 30 - 65 ° C for a period ranging 2 to 8 h, recovering and purifying the 48 substituted epipodopyllotoxins from the reaction mixture by conventional methods.

(Complete Specification 15 Pages Drawings 1 Sheet ) 4807 THE GAZETTE OF INDIA , NOVEMBER 29, 2003 ( AGRAHAYANA 8 , 1925 )

PART III- SEC . 2 ]

191367

55E4

Indian Classification

A 61 K 31/00

International Classification

Title

"PROCESS FOR THE PREPARATION OF STABLE AQUEOUS SOLUTION OF FLUOROQUINOLONE ANTIMICROBIAL AGENT".

Applicant

RANBAXY LABORATORIES LIMITED, a Company incorporated under the Companies Act, 1956 of 19 , Nehru Place , New Delhi - 110 019 , INDIA.

Inventors

ASHISH GOGIA ARVIND KUMAR BANSAL VINOD KUMAR ARORA - ALL INDIAN.

Application for Patent Number 197/DEL/2000 filed on 07/03/2000 .

Appropriate office for opposition proceedings (Rule 4, Patents Rules , 2003 ) Patent Office Delhi Branch , New Delhi - 110 008 .

(13 Claims)

A process for the preparation of a stable aqueous solution of fluoroquinolone antibacterial agent comprising ;

a) mixing at least one fluoroquinolone anti - bacterial agent used in the range of 0.1 % to 40% with a dispersion of a solubilizer comprising amino acid in the range of 0.001% to 30% and water for injection with constant stirring to obtain a solution; and

b) optionally mixing at least one tonicity regulator as herein described used in the range of 1% to 15% with the solution of step a); and

c) optionally mixing at least one chelating agent as herein described used in the range of 0.002% to 2 % with the solution obtained in either step a ) or b ) or a) and b); characterized in that said process produces said solution of step a) , b ) or c ) as the stable aqueous solution of fluoroquinolone antibacterial agent having pH in the range of 2.5 to 8 and said percentages are based on w/ v of the total stable aqueous solution .

: (Complete Specification Pages 20 Drawing NIL Sheets ) 4808

THE GAZETTE OF INDIA . NOVEMBER 29 , 2003 ( AGRAHAYANA 8 , 1925) [PART III-SEC . 2 Ind.Cl

191368 190(B)

Int.Cl

F 23 R 3/40

Title

A GAS TURBINE COMPRISING OF A BURNER FOR COMBUSTING A FUEL .

Applicant :

SIMENS AKTIENGESELLSCHAFT

OF WITTELSBACHERPLATZ 2 , 80333 MUNCHEN GERMANY

Inventor

1. ERICH HUMS .

2. NICOLAS VORTEMYER

1093/ CAL/ 96 FILED ON 12.6.1996

Application no .

( CONVENTION NO . 19521309.2 FILED ON 12.6.95 IN GERMANY. )

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)

PATENT OFFICE KOLKATA.

5 CLAIMS.

}

of A gas turbine , comprising a burner for combusting a fuel , consisting 2 flow conduit extending along longitudinal axis , said flow conduit conducting a fuel in a given direction and having a given cross section taken perpendicular to said longitudinal axis , said cross section having an inner central region at said longitudinal axis and longitudinal flow having an outer annular region concentric to said axisę a main burner disposed throughout said outer annular region and having a fuel outlet ; a catalytic support burner disposed in Baid inner central region and having a fuel outlet in said flow conduit upstream of said fuel outlet of said main burner as seen in said given flow direction , for stabilizing said main burner with catalytic combustion of pilot fuel stream and a preforming stage guiding the pilot fuel stream to said catalytic support burner .

Drawing : 1sheet .

Complete Specification : 10 pages .

4809 THE GAZETTE OF INDIA , NOVEMBER 29 , 2003 ( AGRAHAYANA 8 , 1925 )

PART III- SEC . 2 ]

191369 117E

Ind. Cl

G07 G 001/12

Int. Cl.¹ :

IMPROVED DROP SAFE.

Title

Applicant : BRINKS'S NETWORK, INC , OF 203 BANCROFT BUILDING 3 11 SILVERSIDE- ROAD , WILMINGTON, DELAWARE 19810 UNITED STATES OF AMERICA .

1. JASPER NEWTON KEITH , III

Inventor :

2. WILLIAM L. GUNN.

3 . WILLIAM D. HEATH , JR .

4. JOHN F.G. ANGOVE .

Application No. 1201 /CAL/96 FILED ON 28.06.1996 .

(CONVENTION NO . 08/506, 021 FILED ON 24.7.1995 IN UNITED STATES OF AMERICA . ) APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING ( RULE 4, PATENT RULES 2003 ) PAT- ENT OFFICE KOLKATA.

16CLAIMS

Adrop safe for receiving funds deposited into the safe at various times throughout collection periods that may comprise parts of at least one predefined business day, comprising:

ahousing defining an interior region ;

apparatus provided with the housing and operative to receive funds tendered outside the housing and trasfer the tendered funds into the interior region;

means ( 155 ) associated with the safe for storing signals identifying each deposit into the safe;

means ( 34) operative to access the interior region for removing the funds deposited into the safe ; and means ( 154 ) responsive to the stored signals and operative upon removal of the deposits to identify the total amounts deposited into the safe for each business day that occurred during the collection period.

Drawing : 11 sheets.

Complete Specification : 40 pages .

4810

PART 11-SEC . 2 THE GAZETTE OF INDIA . NOVEMBER 29 , 2003 ( AGRAHAYANA 8 , 1925 )

Ind.Cl

179 G.

191370 Int.Cl

B 67 D - 3 /00 , 5/42 В 05 В 11/00

Title

LIQUID DISPENSING PUMP HAVING WATER SEAL .

Applicant

CALMAR INC . OF 333 , SOUTH TURNBULL , CANYON ROAD , CITY OF INDUSTRY , CA 91745-1203 , UNITED STATES OF AMERICA .

Inventor

1. JAMES R. GILLINGHAM.

2. TANNY LI

KENNETH D SIEGEL

Application no.

2061/ CAL/ 97 FILED ON 03.11.1997

( CONVENTION NO.08 / 826,702 FILED ON 07.04.1997 IN UNITED STATES OF AMERICA . ) APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)

PATENT OFFICE KOLKATA.

11 CLAIMS .

A manually operated liquid dispensing pump adapted to be mounted on a container of liquid to be dispensed , comprising a piston 24 having a stem 26 extending through a pump collar 23 , the piston 24 being reciprocable within a pump cylinder 11 during pumping operation to therewith define a variable volume pump chamber 25 , said cylinder 11 having a container vent port19, vent control means 24 , a discharge valve 39 for controlling the discharge of liquidfrom said chamber , a plunger head 34 mounted on said stem 26 having a discharge opening in communication with said valve , said head 34 having a depending skirt 37 surrounding an upper portion of said stem 26 in spaced relation , another portion of said stem 26 being directly exposed to the atmosphere , characterized in that the pump has liquid seal means 45 mounted on said cylinder for sealing the vent port 19 closed during the pumping operation to avoid ingress of liquid into the container via the vent port 19 when using the pump in a wet environment , said seal means having an annular feathered seal 49 in sliding sealing engagement with said another portion of said stem 26; means 51 on said stem substantially beneath said plunger skirt for interrupting the sealing engagement at or near the end of each piston compression stroke to create vent passage means for opening the vent port , said interrupting means 51 being maintained substantially moisture-free by said skirt 37 when using the pump in the wet environment to avoid the ingress of liquid into the container in an open condition of the vent port 19.

Drawing : 2 sheets .

Complete Specification : 16 pages.

4811 THE GAZETTE OF INDIA . NOVEMBER 29 , 2003 ( AGRAHAYANA 8. 1925)

PART III-SEC . 2 ]

191371 Ind.Cl

55 E4

Int.Cl

A 61 K 31/00 , C 07 D 311/72

Title

AN IMPROVED PROCESS FOR THE PRODUCTION OF ALPHATOCOPHEROL ACETATE .

Applicant :

DEGUSSA -HULS AKTENGESELLSCHAFT, OF DE- 60287 FRANKFURT AM MAIN, GERMANY .

1. DR . STEFFEN KRILL .

Inventor

2. KRETZ STEPHAN .

3. HUTHMACHER , DR. KLAUS .

129/CAL/ 2001 FILED ON 05.03.2001

Application.no .

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)

PATENT OFFICE KOLKATA.

8 CLAIMS .

An improved process for the production of d- tocopherol acetate recirculating process by condensation in a quinone and isophytol 2 of of trimethylhydro- a catalyst system in the presence comprising ZnX and HY ( X - Halide , hydroxide , oxides Yanion of an acetic Bronsted acid) and optionally an elemental metal in acid/water mixture extractable or miscible with water wherein

1. the molar ratio of the zinc halide component 1:4, the molar ratio of zinc halide to approx between 1110 and 1031 and the acetic acid concentration to the TMHQ amounts to approx 10-300 wt . % , and water 15 acetic acid is relative

ii . the d- tocopherol initially obtained is separated acetic and from the esterified with catalyst phase ( catalyst phase I ) acetic anhydride , to yield d - tocopherolacetate ,

iii . after the acetylation , catalyst residues are the d-tocopherol acetate phase by extraction with optionally a cosolvent , removed from water and

iv. the resultant aqueous , acetic phase containing the components ( catalyst phase II ) is combined with catalyst phase I , v . these combined catalyst phases are worked up by separation catalyst of

acetic acid and water , and

vi . the remaining concentrated catalyst solution ( recycled catalyst solution III ) may be reused for the condensation .

Drawing : NIL

Complete Specification : 33 pages.

4--347 G1/2003 4812

THE GAZETTE OF INDIA , NOVEMBER 29 , 2003 ( AGRAHAYANA 8 , 1925) [PART III-SEC. 2 Ind.Cl

39(N)

191372 Int.Cl

B 01 J 20/34

Title

A PROCESS FOR REACTIVATING A SPENT ZEOLITE -CONTAINING PARTICULATE CATALYST.

Applicant :

DAVIS ROBERT EUGENE, OF 125, HILLCREST , HINSDALE , IL 90521 , UNITED STATES OF AMERICA .

AND

BARTHOLIC DAVID BRUCE , OF 75 , WETUMPKA LANE , WATCHUNG NJ 07060 , UNITED STATES OF AMERICA.

Inventor :

1. DAVIS ROBERT EUGENE

2. BARTHOLIC DAVID BRUCE

Application no. 609/CAL/2001 FILED ON 23.10.2001

(CONVENTION NO . 08/581 836 FILED ON 02.01.1996 IN UNITED STATES OF AMERICA . ) (DIVIDED OUT OF NO . 2051 / CAL/ 96 ANTEDATED TO 28.11.1996. )

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)

PATENT OFFICE KOLKATA.

12 CLAIMS .

1. A process, for reactivating a spent zeolite - containing particulate catalyst containing carbonaceous deposits such as herein described , and one or more other contaminants such as herein described , which block the pores of the zeolite and adversely affect the catalytic activity thereof , said process comprising :

a . removing said carbonaceous deposits from the spent catalyst solids by contacting the catalyst with an oxygen - containing gas such as herein described under controlled oxidation conditions such as herein described ,

b . cooling the resulting catalyst ,

c . forming a slurry of the cooled catalyst with an aqueous solution of an activating agent selected from the group consisting of acids , enzymes , detergents and surfactants effective to solubilize or dislodge the contaminants ;

d. agitating said slurry under activation conditions , including an elevated temperature such as herein described and a time such as herein described sufficient to solubilize or dislodge the contaminants , so that the resulting solubilized or dislodged contaminants are carried by the solution from the particulate solid ;

withdrawing in the manner such as herein described , a portion of the solution carrying the solubilized or dislodged contaminants from the slurry ; e .

4813 THE GAZETTE OF INDIA , NOVEMBER 29 , 2003 ( AGRAHAYANA 8 , 1925)

PART III- SEC . 2]

191372 12

16-

-6

7 LT

f. separating in he manner such as herein described , the resulting catalyst from the solution remaining in the slurry;

g. washing in the manner such as herein described , the separated catalyst to remove any residual solution ; and

h. recovering in the manner such as herein described , a treated zeolite -containing catalyst .

Drawing : 1 sheet .

Complete Specification : 33 pages .

11 4814

THE GAZETTE OF INDIA . NOVEMBER 29 , 2003 ( AGRAHAYANA 8 , 1925) [PART III- SEC . 2 Ind.Cl

40E , F

191373 Int.CI

E 21 B 43/00 , 43/25

Title

A METHOD FOR RECOVERY OF METHANE AT INCREASED RATE FROM A WATER - CONTAINING SUBTERRANEAN COAL FORMATION Applicant :

VASTAR RESOURCES , INC , OF 15375 , MEMORIAL DRIVE , HOUSTON, TEXAS 90017 , UNITED STATES OF AMERICA .

Inventor :

1. WALTER CHARLES RIESE

2. STEPHEN VANCE BROSS .

177/cal/ 97 FILED ON 31.01.1997

Application no.

(CONVENTION NO . 08 / 594,725 FILED ON 31.01.1996 . IN UNITED STATES OF AMERICA .) APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)

PATENT OFFICE KOLKATA .

12 CLAIMS .

A method for recovery of methane at increased rate from a water -containing subterranean coal formation, with atleast one wellbeing penetrated through said formation , the method comprising

a) injecting an aqueous oxidant solution , such as herein described, into the coal formation;

Fig.3.

8 b) niaintaining the aqueous oxidant solution in the coal formation for a selected time to enhance or stimulate the formation of cleats in the coal formation; and

c) producing methane from the coal formation at an increased rate in the manner such as herein described.

Complete Specification : 11 pages.

Drawing : 5 sheets .

PART III-SEC . 2]

4815 THE GAZETTE OF INDIA , NOVEMBER 29 , 2003 ( AGRAHAYANA 8 , 1925)

Ind.Cl

61 A , 61 B , 93

191374 Int.Cr

B 01 J 2/04 , A 61 K 9/16

Title

AN APPARATUS FOR CARRYING OUT A METHOD FOR FORMING PARTICLES .

Applicant :

BRADFORD PARTICLES DESIGN LIMITED, OF 49 LISTERHILLS SCIENCE PARK , CAMPUSROAD , BRADFORD, WEST YORKSHIRE BD 7 1HR, UNITED KINGDOM

Inventor :

1. PETER YORK

2. MAZEN HANNA

Application no . 739/ CAL / 95 FILED ON 30.06.1995

(CONVENTION NO . 9413202.4 FILED ON 30.06.1995 IN GREAT BRITAIN. )

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)

PATENT OFFICE KOLKAΑΤΑ .

5 CLAIMS .

Apparatus for use in carrying out a method for forming particles of a substance, the apparatus comprising a particle formation vessel (6 ); means (7 ) for controlling the temperature in the vessel at a desired level ; means (8) for controlling the pressure in the vessel at a desired level ; and inlet means (20) for the co- introduction , into the vessel , of a supercritical fluid, a solution or suspension of the substance in a first vehicle , and a second vehicle, the inlet means comprising a nozzle (20 ) having an outlet end (53 ) communicating with the interior of the vessel (6) and at least three coaxial passages (31,41,51 ) which terminate adjacent or substantially adjacent to one another at the outlet end , [PART III-SEC . 2 THE GAZETTE OF INDIA , NOVEMBER 29 , 2003 ( AGRAHAYANA 8, 1925)

4816

191374

the coaxial passages including a first passage ( 31 ) for introduction of the solution or suspension from a source thereof , a second passage ( 41 ) for introduction of the second vehicle , separately from the solution or suspension , from a source of the second vehicle , and a third passage ( 51 ) for introduction of the supercritical. fluid from a source thereof , the three passages and their respective outlets being arranged relative to one another such that , in use :

(a) all fluid flows into the vessel ( 6 ) are in substantially coaxial directions ;

(b) solution or suspension introduced through the first passage , and second vehicle introduced through the second passage ,ge , contact one another either substantially simultaneously with , or immediately before , their contact with supercritical fluid introduced through the third passage;

(c) supercritical fluid introduced through the third passage meets fluids introduced through the first and second passages at substantially the same time as it enters the vessel ( 6 ) ;

(d) at substantially the same time as the supercritical. fluid meets the solution or suspension and the second vehicle , the flow of the supercritical fluid acts to 4817 THE GAZETTE OF INDIA , NOVEMBER 29, 2003 (AGRAHAYANA 8 , 1925)

PART III-SEC . 2 ]

191374 disperse the solution or suspension and the second vehicle and at substantially the same time the supercritical fluid extracts the vehicles ; and

(e) the outlet of at least one of the inner nozzle passages is located a small distance upstream of the outlet of one of its surrounding passages so as to allow a degree of mixing to occur within the nozzle , between the solution or suspension introduced through the first passage and the second vehicle introduced though the second passage .

Drawing : 15 sheets .

Complete Specification : 48 pages .

[PART III-SEC . 2 4818

THE GAZETTE OF INDIA , NOVEMBER 29 , 2003 ( AGRAHAYANA 8 , 1925 )

191375 :

32C

Ind.Cl

Int.Cl

F 25 J3/02.3/06 , 3/08

Title

: A PROCESS AND AN APPARATUS FOR REMOVING CONCENTRATING AROMATIC AND/OR HEAVIES FROM THE METHANE BASED FEED Applicant :

PHILLIPS PETROLEUM COMPANY , OF BARTLESVILLE . STATES OF OKLAHOMA , U.S.A

1. BERNARD J. DEVERS .

Inventor :

2. JAME YAO.

3. CLARENCE G. HOUSER.

4. WILLIAM R. LOW

518/CAL/ 97 FILED ON 21.03.1997

Application no.

(CONVENTION NOS . 08/621 923 AND 08/65 9732 FILED ON 26.3.96 AND ON 7.6.96 IN UNITED STATES OF AMERICA . )

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)

PATENT OFFICE KOLKATA .

46 CLAIMS .

300

12 302

304

1001

246

306

204

320

14 308

103

311

310 311

22 24- 1061104

314

110

206-316

108-

2030

-205

71 234

209

112

3722200236

202

232

216-

210

36-

-58

216

220

222

230

120

224

226

118

226

109

122

123

62 64 117

156

86-150

140

148

152

128〜

-98

136

144 2

92194 12

142

343

146 4819 THE GAZETTE OF INDIA, NOVEMBER 29 , 2003 (AGRAHAYANA 8. 1925 )

'ART. III -SEC . 2]

191375 A process for removing and concentrating the higher molecular weight hydrocarbon species from a methane -based gas stream comprising the steps of:

(a) condensing a minor portion of the methane - based gas stream thereby producing a two -phase stream;

(b) feeding said two-phase stream into the upper section ofa column;

(d) removing from the lower section of said column a heavies -rich liquid stream;

(e) contacting via indirect heat exchange the heavies -rich liquid stream with a methane - rich stripping gas stream thereby producing a warmed heavies- rich stream and a cooled methane - rich stripping gas stream;

(f) feeding said cooled methane - rich stripping gas stream to the lower section ofthe column; and

(g) contacting the two-phase stream and the cooled methane -rich stripping gas stream in said column thereby producing the heavies - depleted gas stream and the heavies- rich liquid stream.

Drawing : 4 sheets .

Complete Specification : 72 pages .

5-347 GI/2003 4820

THE GAZETTE OF INDIA . NOVEMBER 29 , 2003 ( AGRAHAYAΝΑ 8 , 1925 ) [PART III- SEC . 2 Ind.Cl

31 C

191376 Int.Cl4

G06 K19/08

Title

CHIP CARD AND METHOD OF MANUFACTURING A CHIP CARD Applicant :

SIMENS AKTIENGESELLSCHAFT OF WITTELSBACHERPLATZ 2 , 80333 MUNCHEN GERMANY Inventor :

1. MANFRED FRIES .

2. THIES JANCZEK .

Application no . 420/CAL/ 97 10.03.1997 .

(CONVENTION NO . 19609636.7 FILED ON 12.03.1996 . IN GERMANY . ) APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)

PATENT OFFICE KOLKATA .

19 CLAIMS .

Chip card for the contactless transmission of electric signals to a terminal , having a card body in which a coupling element (2), which has conductor tracks (3 ) and contact connections (4) , and a semiconductor chip (5) having an electronic circuit assigned to the coupling element are constructed in an integrated manner, the semiconductor chip (5 ) being provided on its surface with contact elérnent ( 6) for the electrical connection of the electronic circuit and the contact connections (4) of the coupling element (2) , characterized in that a carrier ( 7) is provided which is made of an electrically Insulating material , which supports at least some of the conductor tracks (3) and the contact connections (4) of the coupling element (2) and , in the region of the contact connections (4) of the coupling element ( 2), is provided with an aperture (8 ) to receive the semiconductor chip (5)

Complete Specification : 17 pages . Drawing : 1 sheets.

4821 PART III-SEC . 2] THE GAZETTE OF INDIA , NOVEMBER 29 , 2003 ( AGRAHAYANA 8 , 1925 )

191377 153

Ind.Cl

Int.Cl4

B 01 D 29/62 ; B 01 D 33/44

Title

AN APPARATUS FOR CLEANING A FILTER WHICH WAS CONTAMINATED BY HOT MELTING RESINS AND POLYMERS IN SITU AND METHOD THEREFOR .

Applicant :

MOVENGINEERING S.R.L OF VIA CAMPIGNANO, 6, 24020 PARRE , (PROV . OF BERGAMO) ITALY.

Inventor : MARIO MIGNANI .

328 /CAL/ 97 FILED ON 21.02.1997

Application no.

(CONVENTION ΝΟ.Μ196A000392 FILED ON 29.02.1996 IN ITALY. )

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)

PATENT OFFICE KOLKATA .

32 CLAIMS .

Apparatus for cleaning a filter which was contaminated by hot melting resins and polymers in situ , without removing the filtering elements , characterised in that it comprises

-32

Valve means (4,5 ) for closing the intake duct ( 1 ) for the product to be filtered and the discharge duct (2 ) for the product filtered in the said filter (3,3a , 3b ) ;

201

0-35

Means ( 6,6a, 6b ) for circulating through said filter (3,3a, 3b ) , a draining fluid to empty said filter ( 3,3a, 3b ) of there residual product .;

7-15 Means ( 6,6a, 6b ) for circulating through sad filter , a cleaning fluid

that is at least partially constituted by superheated steam ; and Means (7,7a, 7b ) for collecting said fluids when they leave said filter (3 , 3a, 3b).

Drawing : 4 sheets.

Complete Specification : 22 pages .

[PART III-SEC . 2 4822

THE GAZETTE OF INDIA . NOVEMBER 29 , 2003 ( AGRAHAYANA 8 , 1925)

191378 Ind.Cl

B 23 K 1/00 F 01 N 3/28

Int.Cl

Title

PROCESS FOR MANUFACTURING A BRAZED HONEYCOMB BODY FOR EXHAUST GAS CATALYTIC CONVERTER AND A BRAZED HONEYCOMB BODY .

Applicant :

EMITEC GESELLSCHAFT FUR EMISSIONSTECHNOLOGIE MBH . OF HAUPTSTRASSE 150 , 53797 LOHMAR, GERMANY.

1 . WOLFGANG MAUS .

Inventor

2. ROLF BRUCK

362/ CAL/ 97 FILED ON 28.02.1997 .

Application no .

(CONVENTION NO . 19611396.2 FILED ON 22.03.1996 IN GERMANY. )

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)

PATENT OFFICE KOLKAΤΑ.

10 CLAIMS .

Fig.1 Process for manufacturing a brazed honeycomb body ( 1 ) for exhaust gas catalytic converters from at least in part structured sheet metal layers (2,3 ) which are wound or layered, wherein the sheet metal layers (2,3 ) are brazed by means of a brazing filler medium ( 160 located between adjacent sheet metal layers (2,3) characterized in that at least one of the adjacent sheet metal layers ( 2,3 ) is configured with a least one raised shape (17) directed towards the adjacent sheet metal layer (2,3 ) and the brazing filler ( 16) is applied in the area of the raised shape ( 17).

Drawing : 2 sheets .

Complete Specification : 14 pages.

4823 PART III-SEC . 2] THE GAZETTE OF INDIA , NOVEMBER 29 , 2003 ( AGRAHAYANA 8 , 1925 )

Ind.Cl

69 1 .

191379 Int.Cl :

Η ΟΙ Η 3/02

Title

ELECTRIC CIRCUIT - BREAKER WITH A MOVABLE CONTACT ARRANGEMENT.

Applicant :

SIMENS AKTIENGESELLSCHAFT OF WITTELSBACHERPLATZ 2 , 80333 MUNCHEN GERMANY Inventor :

1. SEZAI TUERKMEN . 2. ULRICH MARQUARDT.

380/CAL / 97 FILED ON 04.03.1997

Application no.

( CONVENTION NO . 29605081.4 FILED ON 08.03.1996 IN GERMANY)

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)

PATENT OFFICE KOLKATA.

4 CLAIMS .

Electric circuit breaker (1 ) with a movable contact arrangement: ( 2 ) and with a drive device ( 7 ) which actuates the contact arrangement ( 2 ) to make or break and which is connected in an articulated fashion to the contact arrangement ( 2 ) by a driving lover ( 11 ) , it being the case that a transverse bore (16 ) for receiving a bearing bolt ( 17 ) connecting the driving lever ( 11 ) to the contact arrangement ( 2) is arranged in an insulating contact lever carrier ( 6 ) of the contact arrangement (2) , and that the bearing bolt ( 17 ) is secured against removal from the transverse bore (16 ) by a locking screw (22) , characterized in that a. locking piece ( 15 ) which blocks the bearing bolt ( 17 ) axially and consists of insulating plastic is fastened to the contact lever carrier ( 6 ) by means of the locking screw (22) and in that said locking screw ( 22 ) is arranged to engage in a receiving opening ( 23 ) and to stop a spacing from said bearing bolt ( 17 ) .

Complete Specification : 8 pages. Drawing: 1 sheets .

[PART III-SEC . 2 4824

THE GAZETTE OF INDIA , NOVEMBER 29 , 2003 ( AGRAHAYANA 8 , 1925)

191380 :

Ind.Cl

39 (Ε) , 40 (Β)

Int.Cl

B 01 J 23/52 , 23/66 , 23/58 , 37/02, C 07 C 67/055

Title :

A PROCESS FOR THE PREPARATION OF A CATALYST FOR PRODUCTION OF VINYL ACETATE FROM ETHYLENE, ACETIC ACID AND OXYGEN .

Applicant :

HOECHST CELANESE CORPORATION , OF ROUTE 202-206 NORTH SOMERVILLE , NEW JERSEY, UNITED STATES OF AMERICA .

1. TAO WANG .

Inventor :

2. JERRY A. BROUSSARD

746/ CAL/ 97 FILED ON 28.04.1997 .

Application no.

(CONVENTION NO.08 / 655,571 FILED ON 24.5.1996 IN UNITED STATES OF AMERICA. ) APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)

PATENT OFFICE KOLKATA .

12CLAIMS.

A process for the preparation of a catalyst for production of vinyl acetate from ethylene , acetic acid and oxygen which comprises

of (1) contacting a porous catalyst support material with a solution a palladium compound to impregnate the support material with the palladium compound followed by contacting the impregnated support with reducing agent to convert the impreg - nated palladium compound to palladium metal to form a shell dispersion of colloidal palladium metal on the support surface to form precursor catalyst )

(2) contacting the precursor catalyst with a solution of an organometallic gold compound to impregnate the precursor catalyst with the gold compound followed by contacting the impregnated precursor catalyst with a reducing agent to convert the impreg- nated gold compound to gold metal to form a second shell disper- sion coating of colloidal gold metal on the catalyst to form bi- metallic gold catalyst and optionally the said catalyst product is impregnated with an aqueous solution of an alkali metal alkanoate activator , and then dried to provide a catalyst product with enhanced selectivity for vinyl acetate production .

Complete Specification : 23 pages.

Drawing : NIL

4825 THE GAZETTE OF INDIA , NOVEMBER 29 , 2003 ( AGRAHAYANA 8 , 1925)

PART III-SEC . 2]

181381 68 C

Ind.Cl

H 04 J 003/02

Int.Cl4

Title

METHOD FOR TRANSMISSION OF DIGITAL SIGNALS IN TIME DIVISION MULTIPLEX CHANNEL FORM VIA AN ATM TRANSMISSION DEVICE.

Applicant :

SIMENS AKTIENGESELLSCHAFT

OF WITTELSBACHERPLATZ 2, 80333 MUNCHEN GERMANY

WOLFGANG FRAAS . 1.

Inventor :

2. KLAUS HUENLICH .

101 / CAL/ 97 FILED ON 20.01.1997

Application no.

(CONVENTION NO.19604245.3 FILED ON 06.02.1996 IN GERMANY. )

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING CULE 4, PATENT RULES 2003)

PATENT OFFICE KOLKATA .

2 CLAIMS .

Amethod for transmission of digital signals present in a form of time division multiplex channels via an ATM transmission device , a plurality of time division multiplex channels being cyclically combined in a call frame with cyclically transmitted frame cycles and the call frame containing at least one useful information channel and at least one control information channel, and the digital signals being converted into ATM cell useful information, such ATM cells being transmitted in virtual ATM channels and being again converted into time division multiplex channels which are combined in a call frame with frame cycles to be transmitted cyclically, comprising the steps of:

determining if at least one useful information channel of a frame cycle contains no useful information and, entering an information item regarding this useful information channel content in the control information channel of the same frame cycle;

converting of the digital signals of the time division multiplex channels ofthe frame cycle into ATM cell useful information and inserting information items of the time division multiplex channels into an ATM cell assigned to the call frame , a sequence of information items of time division multiplex channels combined in the frame cycle being defined such that information items of the control information channel are inserted in the ATM cell before remaining information items of said frame cycle;

discarding digital signals of a useful information channel which does not contain any useful information, such digital signals not being inserted into the ATM cell ;

transmitting of the ATM cell to a receiver;

reading out word- by - word the ATM cell in the receiver, with evaluation of the entered information item regarding the useful information channel content of each frame cycle;

4826

THE GAZETTE OF INDIA . NOVEMBER 29. 2003 ( AGRAHAYANA 8. 1925 ) PART III-- SEC. 2

191381 converting the information contained in the ATM cell into digital signals of time division multiplex channels and inserting of these time division multiplex channels , ordered by frame cycles , into an associated call frame , a useful information channel without any useful information being inserted into a frame cycle if, during evaluation of the entered information item regarding the useful information channel content of this frame cycle , a use full information channel without any useful information is identified.

Drawing : 3 sheets .

Complete Specification : 9 pages .

4827 PART III -SEC. 2] THE GAZETTE OF INDIA , NOVEMBER 29 , 2003 ( AGRAHAYANA 8 , 1925)

191382 Ind.Cl

4 A(4), 206

Int.Cl

G08 G 5/06

Title :

AIRPORT GUIDANCE AND CONTROL SYSTEM, IN PARTICULAR AN AIRPORT SURFACE MOVEMENT GUIDANCE AND CONTROL SYSTEM 1. SIMENS AKTIENGESELLSCHAFT

Applicant

ว OF WITTELSBACHERPLATZ 2, 80333 MUNCHEN GERMANY

2. OSLO LUFTHAVN AS , OF NYVEIEN , N - 2060 GARDERMOEN .

1. ROBERT CASTOR.

Inventor

2. LOTHAR BELGER .

3. ANDRE JELU .

4. PER INGAR SKAAR .

5. EINAR HENRIKSEN .

6. FREDRIK BERG - NIELSEN .

505 / CAL/ 97 FILED ON 20.03.1997

Application no .

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)

PATENT OFFICE KOLKATA .

21 CLAIMS .

Airport surface movement quidance and control systen ( SMGC6) with radar detection , integrated processing and integrated graphical display in the form of a radar video on at least one monitor for the relevant , in particular to safety- relevant positions and movements of aircraft , and , possibly , vehicles , on all relevant airside areas , ( runway, taxiways , apron) and in the relevant airport airspace ( CTR ) for the operational management of airport traffic , the operational management being carried out by using at least one radar to detect the aircraft , to discrimirate between air movement and stationary , parked aircraft , essentially using the detailed redar video monitor cisplay , the relevant data being displayed after data concentration , on the monitor of at least one controller , comprising the ground traffic signal devices in video form and character or numeric form , in such a way that said controller can input said ground traffic signals which manage the aircraft and vehicles , for example for stoo bars , docking instruction notices etc. , to signal tranmitters in a safety- related manner .

Drawing : 5 sheets.

Complete Specification : 19 pages.

6--347 GI/2003 4828

THE GAZETTE OF INDIA. NOVEMBER 29 , 2003 ( AGRAHAYANA 8. 1925 ) [PART III- SC. 2 Ind.Cl

191383 123 , 39 (Ε)

Int.C14

C 07 F 19/00 5/02

Title

SOLUBILIZATION OF BORIC ACID .

Applicant : STOLLER ENTERPRISES , INC . OF 8580 KATY FREEWAY, SUITE 200 HOUSTON , TEXAS 77024 , UNITED STATES OF AMERICA .

Inventor :

WILLIAM FRANK DEAN .

478/ CAL/ 97 FILED ON 17.3.97

Application no .

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)

PATENT OFFICE KOLKATA .

20 CLAIMS .

A method for solubilizing boric acid to produce a liquid , boron - containing solution , comprising:

Forming a first solution comprising a solvent , a transition metal and a difunctional ligand capable of both complexing said transition metal and coordinating with said boric acid; and

Adding boric aid to said first solution .

Drawing : nil

Complete Specification: 12 pages .

4829 THE GAZETTE OF INDIA , NOVEMBER 29 , 2003 ( AGRAHAYANA 8. 1925 )

PART III-SEC . 2

191384 89

Ind.Cl

G01 B 3/18

Int.Cl4

A MICROMETER

Title

Applicant :

MITUTOYO CORPORATION , OF 20-1 , SAKADO I - CHOME , TAKATSU - KU , KAWASAKI - SHI, KANAGAWA - KEN , JAPAN.

1 . SEIGO TAKAHASHI .

Inventor

2. MASAMICHI SUZUKI

3. MASAHIKO TACHIKAKE .

488/CAL /97 FILED ON 19.03.1997

Application no .

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)

PATENT OFFICE KOLKAΑΤΑ .

10 CLAIMS .

JAR Pin

5281(82)

619

Amicrometer comprising a main body having an anvil (2) atone end portion of said main body , a spindle ( 61 ) provided at the other end portion of said main body , said spindle being displaceable in the axial direction , an encoder (41) provided for detecting the amount of displacement of the spindle when the spindle is rotated , and a digital readout (4) for indicating a measured value in response to an output signal from the encoder, characterized by:

Athimble (71 ) provided on said spindle at its other end at a constant position with respect to the main body in the axial direction of said spindle , sand thimble being mounted on the spindle to rotate about the axis of said spindle , and A rotation transfer means ( 81 ) provided between the said thimble and said spindle for transferring rotation of said thimble to said spindle , said rotation transferring means allowing displacement of the spindle in the axial direction.

Complete Specification : 17 pages .

Drawing : 6 sheets .

48.30

[PART III- SEC. 2 THE GAZETTE OF INDIA , NOVEMBER 29 , 2003 ( AGRAHAYANA 8 , 1925 )

Ind.Cl

206( C)

191385 Int.Cl4

Η 04 Ν 7/26

Title

SCALABLE PREDICTIVE CONTOUR CODING APPARATUS FOR VIDEO SIGNAL .

Applicant :

DAEWOO ELECTRONICS CORPORATION OF 686 AHYEON - DONG MAPO- GU, SEOUL , KOREA .

Inventor :

SEOK - WON HAN ..

Application no.

1504/CAL/ 97 FILED ON 14.08.1997 .

(CONVENTION NO . 97-27561 FILED ON 26.6.1997 IN SOUTH KOREA . )

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003 )

PATENT OFFICE KOLKATA.

5 CLAIMS .

An apparatus for scalably predictive contour coding a video signal including a previous frame and a current frame , wherein each of the previous frame and the current frame contains a contour, the apparatus comprising:

a predicted contour generation block (10 , 20) for generating a predicted contour by motion estimating and compensating a previous base layer,

a vertex determining block (30, 40, 50) for widening the predicted contour by a predetermined threshold Dmax(j ) , generating (j ) th primary and secondary vertices , j ranging from 0 to N, N being a positive integer;

an overlapped confour memory (60) for storing (j ) th layer information,

a reconstructing block (100, 110) for reconstructing a current base layer , when j is 0;

an encoding block (70 , 80) for encoding the (j )th primary and secondary vertices of the (j) th layer information; and

a formatter (90) for formatting the encoded (j) th primary and secondary vertex information in a predetermined way ,

wherein the vertex determining block (30 , 40, 50) comprises:

awidening unit ( 30) for detecting coincidence vertices , wherein each of the coincidence vertices is a crossing point between the predicted contour and 4831 THE GAZETTE OF INDIA , NOVEMBER 29 , 2003 ( AGRAHAYANA 8, 1925 )

PART III- SEC . 2 ]

191385 the current contour or an end point of a portion where the predicted contour overlaps with the current contour, widening the predicted contour by the predetermined threshold Dmax (1) to thereby generate a (j) th widened contour band, and detecting (j) th matching portions where the current contour overlaps with the (1) th widened contour band between two of the coincidence vertices , j ranging from 0 to N, N being a positive integer;

a matched segment determination unit (40) for determining the (1) th matching portions whose lengths are longer than or equal to a predetermined nonnegative threshold TH as (j)th matched segments , and determining end points of the (j) th matched segments as the (j)th primary vertices; and

a secondary vertex determining unit (50) for determining portions on the current contour which do not belong to any of the (j) th matched segment as the (1) th unmatched segments , determining the (1) th secondary vertices by applying a polygonal approximation method based on the predetermined threshold Dmax(1 ) , to the (1) th unmatched segments, and storing the (1)th primary and secondary vertices as the (j )th layer information; and the encoding block (70, 80) comprises:

a primary vertex coding unit (70) for calculating lengths of all the segments , each of which connects two adjacent (1) th primary vertices, and determining a maximum length m, wherein m is greater than or equal to 2º and 4832

THE GAZETTE OF INDIA, NOVEMBER 29 , 2003 (AGRAHAYANA 8 , 1925) " [PART II -SEC. 2

191385 smaller than 2 + 1, encoding the (j) th primary vertex adjacent to a reference point RP in a predetermined direction by representing the length from RP to the(j ) th primary vertex to be encoded by using n bits , encoding a next (j ) th primary vertex by representing the length from the (j) th primary vertex just encoded to the (j ) th primary vertex to be encoded by using n bits if d is greater than m, and encoding the next (j) th primary vertex by representing the length by using s bits otherwise, wherein d is the length from RP to the (j ) th primary vertex just encoded, and d is greater than or equal to 2ª and smaller than 2'+ ' ; and

a secondary vertex encoding unit (80) for encoding each of the (j ) th secondary vertices by representing a 2 dimensional displacement from the closest (j) th primary or secondary vertex located in a predetermined direction to the (j) th secondary vertex to be encoded.

Complete Specification : 22 pages . Drawing : 10 sheets .

4833 PART III-SEC . 2] THE GAZETTE OF INDIA , NOVEMBER 29 , 2003 ( AGRAHAYAΝΑ 8 , 1925)

191386 : 26

Ind.Cl

Int.Cl

A 46 B 7/04

DENTAL CARE DEVICE WITH A HANDLE .

Title

Applicant :

CORONET - WERKE GMBH, OF POSTFACH 1180 , D- 69479 WALD -MICHELBACH, GERMANY.

GEROG WEIHRAUCH

Inventor :

1180/ CAL / 97 FILED ON 20.6.1997

Application no.

(CONVENTION NO.19624962.7 FILED ON 22.6.1996 IN GERMANY. )

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)

PATENT OFFICE KOLKATA .

9 CLAIMS .

1211

7. 10 14

4 Dental care device with a handle , a head ( 1) and a care part (2) insertable in locking manner in a depression (6) thereof and which can be ejected by means of a resilient pressure piece ( 13 ) on the back ( 10) of the head and acting when pressure is exerted on the back of the care part , characterized in that the head ( 1 ) on the back ( 10) has an opening ( 11) closed by the pressure piece ( 13 ) and in which engages the care part (2) and that the pressure piece is constructed as à flexible plastic disk (14) and whose circumferential edge is sealingly fixed on the wall of the opening ( 11 ).

Drawing : 1 sheet.

Complete Specification : 14 pages.

4834

THE GAZETTE OF INDIA. NOVEMBER 29, 2003 ( AGRAHAYANA 8. 1925 ) [PART III -SEC . 2 Ind.Cl

60 F

191387 Int.Cl

A41 D 1/06

Title

AN IMPROVED ARTICLE OF CLOTHING

Applicant :

MYRTLE MANAGEMENT LIMITED , OF 137 CAPTAIN SPRINGS ROAD ONEHUNGA , AUCKLAND , NEW ZELAND.

Inventor :

1. SHEEL KHEMKA

2. ΝΑΝΑ - ΑΚΟTO OFEI

1519/CAL/ 97 FILED ON 19.08.1997

Application no.

( CONVENTION NOS. 9617736.5 AND 9619017.8 FILED ON 23.8.96 AND 11.9.96 IN UK) APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)

PATENT OFFICE KOLKΑΤΑ .

17 CLAIMS .

-26

કુબ An improved article of clothing having a crotch portion separating two leg portions , and having in the crotch portion a crotch fly extending along the perineal region of a seam line joining the two leg portions , the crotch fly being openable and closable by a fastening means which in the closed position is concealed , wherein the fastening means is provided along a line in the crotch portion in such a manner as to give the appearance of an extension of said seam line in the closed position .

Complete Specification : 34

Drawing : 16 sheets .

pages .

PART III -SEC . 2]

4835 THE GAZETTE OF INDIA , NOVEMBER 29 , 2003 (AGRAHAYANA 8 , 1925 )

Ind.Cl

191388 Int.Cl4

F 16L 55/00 В 29 С 47/24

Title

AN EXTRUSION APPARATUS AND METHOD FOR PRODUCING AN EXTRUDED PRODUCT .

Applicant :

NEXTROM HOLDINGS S.A. OF ROUTE DU BOIS 37, CH - 1024 ECUBLENS , SWITZERLAND .

Inventor :

KARI KIRJAVAINEN 1.

2. JYRI JARVENKYLA

Application no . 1164/CAL/96 FILED ON 24.6.1996

( CONVENTION NOS . 9503272-8 ; 961540 AND 981822 FILED ON 20.9.95 , 04.04.96 AND ON 29.4.1996 IN SWEDEN FINLAND , FINLAND. )

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)

PATENT OFFICE KOLKATA.

22 CLAIMS .

An extrusion apparatus comprising

At least one stator ( 1,6,10)

At least one rotor (2,2a, 2b ) .

3 102 26

At least one annular feed gap (3 ) situated between the stator ( 1,6,10) and the rotor (2,2a, 2b) , for the material to be extruded (e.g. plastic material ), said feed gap comprising a section having a decreasing diameter at least partly continuously in the direction of flow of the material to be extruded (e.g. plastic materials, ) and 13 12

At least one actuator (5 ) for rotating the rotor (2,2a, 2b) , characterised in that the feed gap (3 ) comprises , after the section having the decreasing diameter , a section having a continuously increasing diameter at least at a section of its length in the direction of flow of the material to be extruded (e.g. plastic material . )

Drawing : 4 sheets .

Complete Specification : 23 pages .

7-347 /2003 [PART IN- SEC. 2 THE GAZETTE OF INDIA , NOVEMBER 29 , 2003 ( AGRAHAYANA 8 , 1925)

48.36

191389 :

Ind.Cl

B 22 D 23/06 В 22 C 9/02

Int.Cl

Title

AMETHOD FOR PRODUCING A SCROLL MEMBER BY CASTING AND A SCROLL MEMBER SO PRODUCED.

Applicant :

COPELAND CORPORATION , OF CAMPBELL ROAD, SIDNEY OHIO 45365-0669 , USA

1. WARREN GATHINGS WILLIAMSON

Inventor

1223 /CAL /96 FILED ON 03.07.1996

Application no.

(CONVENTION NO . 08/579 , 785 FILED ON 28.12.95 IN USA)

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)

PATENT OFFICE KOLKATA .

25 CLAIMS .

A method for producing a scroll member by casting , comprising the steps of:

34-

36 32 22

a) Placing a pattern configured as a scroll member into a molding tool;

b) Surrounding substantially the entirety of said pattern with a first refractory material;

c) Decomposing said pattem in order to define a cavity having the configuration of said pattern ; and

d) Pouring a sufficient quantity of molten metal into said molten metal into said molding tool in order to fill the cavity defined by said pattern to obtain a cast scroll member upon solidification of said molten meia¹ .

Drawing : 4 sheets .

Complete Specification : 37 peges .

4837 PART III - SEC . 2] THE GAZETTE OF INDIA , NOVEMBER 29 , 2003 ( AGRAHAYANA 8 , 1925)

191390 Ind.Cl

Int.Cl

B 65 B 29/04 B 65 D 81/00

Title

AN INFUSION PACKET

Applicant :

HINDUSTAN LEVER LTD . OF HINDUSTAN LEVER HOUSE, 165/166 BACKBAY RECLAMATION, MUMBAI 400 020

TIMOTHY BRURY 1.

Inventor :

2. DANTE GHIRLANDI

1985 / CAL96 FILED ON 15.11.1996

Application no.

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)

PATENT OFFICE KOLKATA.

11 CLAIMS .

Aninfusion packet comprising a pair of sealed compartments (12a , 12b , 32a, 32b ) said compartments being sealed by transverse seals (8, 10, 34a, 34b, 38a , 38b) and containing infusion material , said compartments being joined together at opposite ends of the compartments by a connecting region(6,36) at one of said ends and by an end seal (22 , 54) at the other of said ends , characterised in that theinfusion packet has a drawstring (14,40) comprising end portions (18, 42, 42a) which are held captive by the end seals (22, 54) but which are slidable through the end seals (22, 54) , pull portions ( 15, 46 , 46a, 48, 48a ) located between the compartments ( 12a , 12b, 32a , 32b) which are longer than the distance betweenthe connecting region (8 , 36) and the end seal (22, 54 ) and an intermediate portion ( 16,50) secured to the connecting region(8,36) .

4838

THE GAZETTE OF INDIA . NOVEMBER 29 , 2003 ( AGRAHAYANA 8 , 1925) [PART III-SEC . 2 :

Ind.Cl

191391 Int.Cl

B 65 B 53/02

Title

HEAT - SHRINKABLE ENUELOPE

Applicant :

RXS KABELGARNITUREN GMBH , OF PROFILSTRASSE 4 , D-58093 HAGEN , GERMANY .

Inventor :

1 . ULRICH AFFORLDERBACH .

2. ANDREAS KUPCZYK .

3. HANS - JUERGEN MELTSCH .

DR . SIGRID ROSE .

5. WOLFGANG SCHULTE .

2036/CAL/ 96 FILED ON 26.11.1996

Application no.

( CONVENTION NO . 19544539.2 FILED ON 29.11.1995 IN GERMANY . )

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)

PATENT OFFICE KOLKAΤΑ .

40 CLAIMS.

Heat shrinkable envelope comprising a surface layer

ال

UH VP VE ) FS ) and a reinforcing insert ( VE ) , sad reinforcing insert being forrned of a grid of elongated parallel first and elongated parallel second grid elements (GE) ,

Wherein the first and second grid element ( GE ) are arranged as to cross one another , and Wherein the first and second grid element (GE)

Are made of plastic and are connected firmly adhering to one another in their intersections, Characterised in that

The evelope is provided with a longitudinal slit, the edges of which have closure elements ( VP) along the longitudinal edges , both the surface layer ( FS ) and the grid are shrinkable in the direction vertical to the closure elements ( VP ) , due to the fact that both the surface layer (FS) and the grid are stretched in a vertical direction to the closure elements (VP) ,

The stretching direction and , respectively . the shrinking direction (SR) are at an angle with respect to the longitudinal direction of the first and second grid elements (GE) .

Drawing : 2 sheets.

Complete Specification : 20 pages .

4839

THE GAZETTE OF INDIA , NOVEMBER 29 , 2003 ( AGRAHAYANA 8 , 1925 )

PART III-SEC . 2]

Ind.Cl :

H 04 L 23/00 H 04 B 1/62 G 10 L 9/14

Int.Cl

191392

REDUCED COMPLEXITY SIGNAL TRANSMISSION SYSTEM

Title

KONINKLIJKE PHILIPS ELECTRONICS N.V. , OF

Applicant :

GROENEWOUDSEWEG 1 , 5621 BA EINDHOVEN , THE NETHERLANDS

1 . FRIEDHELM WUPPERMANN .

Inventor :

2. FRANSISCUS MARINUS JOZEPHUS DE BONT .

98/CAL/ 97 FILED ON 20.01.1997

Application no .

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING ( RULE 4, PATENT RULES 2003)

PATENT OFFICE KOLKATA.

4 CLAIMS .

update

memory

yor

56-

codebook Texcitation

generator

adaptiveya[n]

P Ukt- 等

interpolator

LAR

sinsulationofdecoder

46L45

Fixed

fixed codebook

search- predecibe

ik]44

ofcodebook

e[n]

acmolive

codébook adaptive

HOJDAG

afcodebook

hind

mputse responseh palculator

jomdased

weighting

[$][x]bo

30-4

26-

zero-input response

[k][s]

framing

20 4840

DPART III - SEC . 2 THE GAZETTE OF INDIA , NOVEMBER 29 , 2003 ( AGRAHAYANA 8 , 1925 )

191392 Reduced complexity signal transmission system comprising a transmitter ( 2 ) for transmitting an input signal to a receiver (10) via a transmission channel (8 ) , the transmitter ( 2 ) comprising an encoder ( 4) with an excitation sequence generator (50) for generating a plurality of excitation sequences , selection means (45) for selecting an excitation sequence from a plurality of excitation signals resulting in a minimum error between a synthetic signal derived from said excitation sequence , and a target signal derived from the input signal , the transmitter ( 2 ) being arranged for transmitting a signal representing the selected excitation sequence to the receiver , the receiver ( 10 ) comprising a decoder ( 14) with an excitation sequence generator ( 122 ) for deriving the selected excitation sequence from the signal representing the selected excitation sequence , and a synthesis filter ( 132) for deriving a synthetic signal from the excitation sequence , characterised in that the enco ( 4) comprises an analysis filter (80) for deriving from the input signal a residual sequence , and in that the encoder ( 4 ) comprises excitation sequence selection means (82, 84 , 86, 88, 90 , 92 , 94) for selecting from a larger set of excitation sequences the plurality of excitation sequences having the largest resemblance with the residual sequence .

Drawing: 4 sheets .

Complete Specification : 20 pages .

4841 THE GAZETTE OF INDIA , NOVEMBER 29 , 2003 (AGRAHAYANA 8 , 1925 )

PART III -SEC . 2 ]

191393 206 E

Ind.Cl

Η 02 Η 3/40

Int.Cl

DISTANCE PROTECTION METHOD .

Title

Applicant :

SIMENS AKTIENGESELLSCHAFT OF WITTELSBACHERPLATZ 2 , 80333 MUNCHEN GERMANY

1. DR. ANDREAS JURISCH .

Inventor :

2. DR . TEVFIK SEZI .

150/CAL/ 1997 FILED ON 27.01.1997 .

Application no.

(CONVENTION NO.19605025.1 FILED ON 31.01.1996 IN GERMANY. ) APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATEIT RULES 2003)

PATENT OFFICE KOLKATA .

12 CLAIMS .

ULa-E(t)

143-170 UL2-E(t)

[L2(1)

Isalt

152(1)

Us3(1)

Us2(t)

Usy(t)

க்

8~16 4842

THE GAZETTE OF INDIA . NOVEMBER 29. 2003 ( AGRAHAYANA 8 , 1925) [PART III- SEC . 2

191393 Distance protection method for detecting short circuits on a section ( A ) , which is to be monitored , of an electric power supply line , in which method , in the case of a short circuit , impedance values formed from current and voltage are checked for the purpose of obtaining a tripping signal as to whether they lie inside a prescribed ' oping characteristic , characterized in that

a first tripping characteristic ( 5b ) which is of relatively small dimension with respect to said section ( A ) , to be monitored , of the power supply line , and an intially determined impedance values ( Z ) are checked with (t) respect to said first tripping characteristic ( 5b ) as to whether they lie inside or outside said tripping characteristic ,

in the case of initially determined ( Z (t impedance values ) which lie inside the first tripping characteristic ( 5b ) , the tripping signal is generated

in the case of initially determined impedance values which lie outside said tripping characteristic ( 5b ) , a changeover is made to a maximum tripping characteristic ( 86 ) corresponding to the section ( A ) to be monitored , and impedance values following the initially determined impedance values are checked as to whether they lie inside the maximum tripping characteristic ( Bb ) and the tripping signal is

generated .

Complete Specification : 37 pages . Drawing : 3 sheets .

4843 THE GAZETTE OF INDIA . NOVEMBER 29, 2003 (AGRAHAYANA 8 , 1925 )

PP - SEC. 21

191394 63B

Ind.Cl

Η 02 Κ 9/00

Int.Cl¹

ELECTRIC ROTATING MACHINE

Title

Applicant :

HITACHI , LTD . OF 6 ,, KANDA, SURUGADAI , 4 - CHOME, CHIYODA - KU, TOKYO , JAPAN .

1 . HIDEAKI MORI

Inventor

SHINGO YOKOYAMA

3. KADOMIYAKAWA .

4. KAZUMASA FUJIOKA

220/CAL/ 97 FILED ON 07.02.1997

Application no.

(CONVENTION NO . 08/026451 FILED ON 14.02.1996 IN JAPAN. )

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)

PATENT OFFICE KOLKATA .

13 CLAIMS .

An electric rotating machine comprising

an a plurality of coil slots , provided in an axial direction in outer surface of a rotor and circumferentially arranged at intervals around said rotor;

sub -slots formed in bottom locations of said coil slots;

rotor winding , retained in said coil slots;

space" s provided between said ccil slots and said rotor wincing when extended outside of said coil slots ;

a wedge used to secure to said retained in said coil slots ; and rator winding that is

formed a plurality of radially formed draft passages widthwise relative to the coils retained in said coil slots holes comprising radially formed passages of formed vent extending from said sub - slots to said wedge ; passages in which inner faces of said vent holes being formed by said winds ; passages in which inner faces of said went holes being forms . said coil slots and said windings ; passages constituting a positioned at said rotor end . by

Drawing : 14 sheets .

Complete Specification : 37 pages .

8-347 G1/2003 4844

THE GAZETTE OF INDIA , NOVEMBER 29 , 2003 ( AGRAHAYANA 8. 1925 ) [ PART III - SFO.2 Ind.Cl

32(C)

191395 Int.CI :

C 08 J 5/18 ; C 08 L 53/02

Title

A PROCESS OF MANUFACTURING A SOLUBLE POLYMER FILM

Applicant

METALLGESELLSCHAFT AKTIENGESELLSCHAFT, OF REUTERWEG 14, D - 60323 FRNKFURT AM MAIN, GERMANY.

Inventor :

1 . DR . FRITZ SERGE .

2. REINHOLD FELDMANN

Application no . 327/ CAL / 97 FILED ON 21.02.1997 .

(CONVENTION NO . 19621661.3 FILED ON 30.05.1996 IN GERMANY . )

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)

PATENT OFFICE KOLKΑΤΑ .

6 CLAIMS .

A process of manufacturing a soluble polymer film, comprising casting or blowing :

a) 30 to 99.5 wt-% of a thermoplastic polymer, which consists of styrene- butadiene copolymers with a content of 60 to85 wt % bound styrene and has a modulus of elasticity in tension of 1100 to 1800 MPa , and

b) 0.5 to 70 wt-% of a thermoplastic rubber , which consists of styrene - butadiene copolymers with a content of 25 to 35 wt-% bound styrene and has a modulus of elasticity in tension of 2.6 to 3.5MPa.

Complete Specification : 9 pages. Drawing : NIL.

4845 FARI ill-SEC . 2 ] THE GAZETTE OF INDIA , NOVEMBER 29 , 2003 ( AGRAHAYANA 8, 1925 )

191396 190

Ind.Cl

F 03 B 17/04 & 17/02

Int.Cl

Title

AN AUTOMATIC PRIME MOVER FOR GENERATING MECHANICAL OR ELECTRICAL POWER WITHOUT USING ANY FUEL OR OTHER CONVENTIONALLY KNOWN POWER SOURCES

Applicant :

MRS .. BHRAMOR SINHA AND MR. ANIRUDDHA SINHA OF 5/2 , SASTRI NARENDRA NATH GANGULY ROAD , HOWRAH - 711104 , WESTBENGAL , INDIA.

1. MRS .. BHRAMOR SINHA

Inventor :

2. MR . ANIRUDDHA SINHA

495/ CAL/ 97 FILED ON 19.03.1997,

Application no .

6 (COMPLETE AFTER PROVISIONAL FILED ON 17.07.1998 . )

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING ( RULE 4, PATENT RULES 2003)

PATENT OFFICE KOLKATA.

7 CLAIMS .

-18

1.0B

+21

-20

マイ

10 FA

-31

200

25 29

32 31 4

a 4846

THE GAZETTE OF INDIA . NOVEMBER 29. 2003 ( AGRAHAYANA 8. 1925) [PART III- SEC . 2

191396 !

An automatic prime mover for generating mechanicai or electrical power without using any fuel or other conventionally kaown power sources comprising a long continuous chain systea ( 1 ) coasisting of & number of air tight closed hollow cylinders A , 2B) linked with each other by equal length of chains ( 3 ) , the whole chain system being arranged vertically to a frame work ( 4) encircling at least two pinion or grooved wheels ( 5 and 6 ) at top and bottom rotated by the moving chain system ( 1 ) ; one side of the chain system ( 1A ) freely hanging in the open air with the other side ( 18) passing through a long tower like vertically arranged barrel ( 7 ) containing liquid ( 8 ) the height of the barrel (7) will be measured so as to accommodate required number of sylinders ( 2A) alongwith connecting chains for generating required output ; the barrel ( 7 ) having narrow inlet tube ( 7A) and outlet tube ( 78) , inner cross - section of which accommodate the cross - section of the said cylinders ( 2A , 2B ) with minimum clearence and having liquid sealing means ( grease ) coated on the aylinder , the iniet tube ( 7A ) and outlet tube ( 7B ) will be at sessured height so that during rotation of the chain 1 , the inlet tube ( 7A) mouth and the outlet tube ( 7B ) mouth being periodically but constantly closed by means of moving cylinder thereby preventing escape of liquid ( 8 ) from the barrel ( 7 ) provided with iiquid compensating seans and subsidiary arrangement (40) for maintaining constant pressure on the liquid inside the barrel .

Drawing : 2 sheets .

Complete Specification : 16 pages .

4847 THE GAZETTE OF INDIA. NOVEMBER 29 , 2003 ( AGRAHAYANA 8 , 1925)

PART III-SEC . 2 )

191397 26 X L III ( I )

Ind.Cl

A 61 C 15/00

Int.Cl

INTERDENTAL CLEANER AND PROCESS FOR ITS PRODUCTION :

Title

Applicant :

CORONET - WERKE GMBH , OF POSTFACH 1180 , D - 69479 FILED ON WALD -MICHELBACH, GERMANY .

GEROG WEIHRAUCH

Inventor

1811 /CAL/ 97 FILED ON 26.09.1997

Application no.

(CONVENTION NO. 19642431.3 FILED ON 15.10.1996 IN GERMANY. )

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)

PATENT OFFICE KOLKAΑΤΑ .

25 CLAIMS .

Interdental cleaner ( 10) with an elongated , rod - like carrier ( 11 ) made from a first plastic material , which is covered in partial areas of its surface by at least one insert or support ( 14,18 ) of a second plastics material , which is softer than the first plastics material .

Drawing : 5 sheets.

Complete Specification : 14 pages.

4848

THE GAZETTE OF INDIA . NOVEMBER 29 , 2003 ( AGRAHAYANA 8 , 1925 ) [PART III-- SEC . 2 Ind.Cl

10 B

191398 Int.Cl

C 06 C 5/06

Title

DELAY TRAIN IGNITION BUFFER

Applicant

THE ENS IGN - BICKFORD COMPANY , OF 660 HOPMEADOW STREET , SIMSBURY ,CT 06070 , UNITED STATES OF AMERICA .

Inventor

1. RONALD MARK DUFRANE .

2. ROBERT GEORGE PALLANCK .

3. ERNEST LAIRD GLADDEN .

Application no . 75 / CAL/ 91 FILED ON 24.01.1991

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)

PATENT OFFICE KOLKATA .

10 CLAIMS .

A signal delay assembly, for use with a blasting signal transmission device , comprising:

A housing as herein described

A delay train , such as herein described, position within said housing including a pyrotechnic composition for transmitting a blasting initiation signal to provide a preselected time delay from a first side of said delay train to a second side of said delay train ; and A buffer element, such as herein described positioned between an input end of said housing and said delay train first side for allowing signal transmission while controlling the rate that pressure is applied to said delay train and for retaining said pyrotechnic composition in the event of rupture of said transmission device or ejection of said transmission device from said housing .

131

Complete Specification : 16 pages. Drawing : 3 sheets .

4849 THE GAZETTE OF INDIA , NOVEMBER 29 , 2003 ( AGRAHAYANA 8. 1925)

PART III- SEC . 2 ]

191399 :

Ind.Cl

48 A (4)

H 01 R 4/00

Int.Cl4

Title

A DEVICE FOR MOUNTING AT LEAST ONE CABLE IN A DISC ADAPTED TO BE POSITIONED IN A CABLE CONNECTION PROTECTING SLEEVE

Applicant :

POUYET S.A. OF 6/8 RUE DU VIEUX CHEMIN , F - 94207 IVRY SEINE FRANCE.

1 . ALAIN JUHEL .

Inventor

2. OLIVIER PERDRIAU .

1147/ CAL/ 97 FILED ON 17.06.1997)

Application no.

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)

PATENT OFFICE KOLKATA .

12 CLAIMS .

FIG.

Device for mounting at least one cable in a disc , constituted by at least two elements , adapted to be positioned in a cable connection protection sleeve , said disc ( 102 ; 1 , 1,2,3,2) bearing at least one cable - securing means ( 141 ;4,4) maintained fixed with respect to said disc by a fastening means , characterized in that said securing means is borne. on the front face of said disc adapted to be turned towards the outside of said sleeve , and in that said securing flange (141;4,4) enclosed in a housing ( 120 ; 20, 20,23,20) formed on the front face of said disc (102; 1 , 1,2,3,2) .

Drawing : 5 sheets.

Complete Specification : 18 pages .

4850

THE GAZETTE OF INDIA , NOVEMBER 29. 2003 ( AGRAHAYANA 8. 1925 ) [ PART III - SEC . 2 Ind.Cl

119 E - 4

191400 Int . Cl

F 04 B 53/18

Title

OIL PICKUP APPARATUS FOR HERMETIC COMPRESSOR.

Applicant :

LG ELECTRONICS INC, OF 20, YOIDO - DONG , YONGDUNGPO - KU, SEOUL , REPUBLIC OF KOREA

Inventor i :

SI DEUK KIM .

2270/ CAL/ 1997 FILED ON 02.12.1997

Application no .

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)

PATENT OFFICE KOLKATA.

6 CLAIMS .

An oil pickup apparatus for a hermetically sealed compressor having an oil guide piece fixedly connected into a lower portion of a crank shaft provided in the hermetically sealed compressor , and an oil pickup propeller fixed inside the oil guide piece and sucking up oil into an oil path formed in the crank shaft while being rotated corresponding to a rotation of the crank shaft , characterized in that oil guide piece and the oil pick up propeller are formed into a unitary body .

105

105a

100p

100

100a

Drawing : 3 sheets .

11 pages .

Complete Specification :

4851 THE GAZETTE OF INDIA. NOVEMBER 29 , 2003 ( AGRAHAYANA 8, 1925 )

PART III-SEC . 2 )

206 E

Ind.Cl..

191401

H 04 Q3 / 00

IntCI :

"SERVICE CREATION SYSTEM FOR A

COMMUNICATIONS NETWORK "

BRITISH TELECOMMUCINATIONS PUBLIC

APPLICANT( S) :

LIMITED COMPANY

81 NEWGATE STREET

LONDON ECIA 7AJ

ENGLAND

A BRITISH COMPANY

1. JEREMY PAVIER;

INVENTOR ( S ) :

2. GRAHAM DAVID TURNER;

3. DONALD GEORGE PAUL WATERS ;

4. RICHARD DEWITT COX;

5. ANDREW TIMOTHY HUNTER;

6. JEFFREY KEVIN RAND.

filedon

526/MAS/95

01-May-95

Application No.

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS

( RULE 4 , PATENTS RULES, 2003 ) PATENT OFFICE, CHENNAI BRANCH .

5 CLAIMS

Fig. 1.

A service creation system for communications network comprising more than one service creation module (232) , said modules having interfaces therebetween, and having different respective toolsets associated therewith such that selected sets of operations offered by the service creation system can be made available by different modules ( 232) , characterized in that a first of said modules (232 ) has means to generate or access service application features (401) which comprise code objects which can be deployed in elements of the network ; and a second of said modules (232) has means to generate or access marketable service features (403 ) , and means to generate or access service packages (404) , communicable to a third of said modules (232) .

232

COMP.SPECN : 33 PAGES DRAWING : 13 SHEETS.

SCE1

SCE2

101

SM DOMAIN

233

232 00

SDS

YSTEMS

102

232

SCE3

FLEMENT

9---347 G1/2003 [PART III-SEC, 2 4852

THE GAZETTE OF INDIA, NOVEMBER 29 , 2003 ( AGRAHAYANA 8, 1925)

161A

Ind .Cl .:

191402

E 01 C 019/48

IntCI4 :

"LAYING PLANK FOR A ROAD FINISHER "

SVEDALA STRASSENFERTIGER GMBH

APPLICANT( S) :

AMMERLANDER STR 93

26203 WARDENBURG

GERMANY

INVENTOR ( S ) :

1. BURKHARD SCHLEITER; 2. KLAUS - DIETER BUNK .

685/MAS/95

filed on 07-Jun-95

Application No.

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES , 2003 ) PATENT OFFICE , CHENNAI BRANCH .

11 CLAIMS

Laying plank (11 ) for a road finisher , having a main beam articulated on the road finisher , having respectively assigned to one of the two opposite ends of the main beam in each case a shifting beam ( 13 ) and having respectively assigned to one of the two shifting beams ( 13 ) in each as an intermediate carriage ( 14 ) for mounting the respective shifting beam ( 13 ) on the main beam such that the said shifting beam is displaceable transversely to the finishing direction ( 10) , each intermediate carriage ( 14) having two spaced - apart end plates (20 , 21 ) , which are displaceably mounted within the main beam on guides (23 ) , characterized in that the intermediate carriages ( 14) have guide elements for inner plates ( 19) of the shifting beams ( 13 ) , the said guide elements projecting from the outer end plates (20 ) of the said intermediate carriages in the direction of the respective shifting beam( 13 ) .

(23)

25 21

Fig. 1 COMP.SPECN : 12 PAGES DRAWING : 4 SHEETS 4853. PART III- SEC . 2] THE GAZETTE OF INDIA , NOVEMBER 29 , 2003 ( AGRAHAYANA 8 , 1925 )

191403

92F

Ind . Cl .:

A 23 N 12/00

IntCI :

"AUTOMISED GRAIN - CUM-GRANULE ROASTER "

DURAISWÁMI NARAYANASWAMY

APPLICANT( S) :

DURAISWAMI NATARAJAN

DURAISWAMI RADHAKRISHNAN

ALL SUBJECTS OF INDIAN REPUBLIC

RESIDING AT NO : 103 ,

BHARATHI PARK ROAD NO :2 ,

COIMBATORE - 641 043 ,

TAMILNADU, INDIA

1. DURAISWAMI NARAYANASWAMY

INVENTOR( S) :

2. DURAISWAMI NATARAJAN;

3. DURAISWAMI RADHAKRISHNAN .

19-Jun-95

filed on

737/MAS/95

Application No.

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES , 2003 ) PATENT OFFICE, CHENNAI BRANCH .

6 CLAIMS

An AUTOMISED GRAIN - CUM-GRANULE ROASTER, basically consisting of a Rotating Drum ( 1 ) with a Spiral Arrangement (2) with in it, covered by a Cylindrical Metallic Sheet (8 ) , supported on two adjustable columns (5 & 6) on either ends , mounted on an axle , which rotates with in two Bearings (4) on either ends . INLET

CLEARANCE COMP.SPECN : 7 PAGES DRAWING : 1 SHEETS .

NAIVA

SAND GRANULES

HEATINGENTS

9- 4854

THE GAZETTE OF INDIA , NOVEMBER 29 , 2003 (AGRAHAYANA 8 , 1925) [PART III-SEC . 2 Ind . Cl .:

172B

191404 IntCI 4 :

B 65 H - 54/ 02

B 65 H - 67 /06

"DEVICE FOR TAKING OUT SINGLE TEXTILE TUBES FROM A CONTAINER "

APPLICANT( S) :

MASCHINENFABRIK RIETER AG

KLOSTERTRASSE 20

CH -8406 WINTERTHUR

SWITZERLAND

A SWISS COMAPANY .

INVENTOR( S) :

1.WERNLI JORG;

2.WITSCHI MARTIN ;

3. DUBENDORFER MARTIN .

APPLICATION NO :

769 MAS 95 FILED ON

22-Jun -95 INDIA APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES , 2003 ) PATENT OFFICE , CHENNAI BRANCH .

4 CLAIMS

A device for taking out a single textile tube (2,) from a container ( 1 ) having one or more textile tubes ( 2) through a discharge - opening (3 ) of said container ( 1 ) comprising a take - off device ( 4) , which revolves around an axis (5) and which is provided with grooves ( 7 ) to receive single textile tube (2) , wherein part of the cirumferential contour of the take- off device (4) which is between the grooves (7) and which is in contact with the tubes (2) in the area of the discharge - opening (3 ) has a contour which deviates from a circle having its center in the axis of the take - off device.

4a COMP.SPECN : 9 PAGES DRAWING : 1 SHEET .

-7

Fig.2

10 4855 THE GAZETTE OF INDIA . NOVEMBER 29 , 2003 ( AGRAHAYANA 8. 1925 )

PART III-SEC . 2)

191405

127 A

Ind.Cl.:

F16D 25/00

IntCI :

"A VACUUM OPERATED SPEED RANGE

SHIFTING MECHANISM "

DANA CORPORATION

APPLICANT(S) :

A US CORPORATION OF 4500 CORR STREET TOLEDO , OHIO 43615 USA

1. RANDY L SOMMER .

INVENTOR( S) :

26-Jun-95

filedon

785/MAS/95

Application No.

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4, PATENTS RULES , 2003 ) PATENT OFFICE. CHENNAI BRANCH .

16CLAIMS

Avacuum operated speed range shifting mechanism for use in a drivetrain subassembly having an input shaft and at least one output shaft, each shaft being rotatably mounted within a support structure, said shifting mechanism comprising ; an annular shift sleeve surrounding and splined to the output shaft for rotation therewith, said shift sleeve being axially moveable between a first axial position causing the output shaft to rotate at a first angular speed and a second axial position causing the output shaft to rotate at a second angular speed; a non - rotatable annular housing disposed coaxially about said shift sleeve within the support structure , said housing being axially restrained by the support structure , wherein said housing defines an interior chamber; a flexible annular diaphragm having an outer portion attached to said housing , said diaphragm disposed within said housing so as to divide said interior chamber into first and second annular cavities , wherein said first and second cavities are substantially hermetically sealed ; a shift collar assembly attached to said diaphragm and disposed in surrounding relationship with said shift sleeve ; and means for evacuating one of said first and second cavities and for simultaneously venting the other of said first and second cavities to atmosphere so as to exert a generally axial force on said shift collar assembly thereby forcing said. shift sleeve 10 be disposed in one of the first and second axial positions ; wherein said evacuating and venting means comprises a plurality of flow passages formed in said housing .

-196

-100

198

~ 210

212 206

-202

210

204

214 ( MA KENG ), NG

FIG . 3

GENT FOR APPL

COMP.SPECN : 22 PAGES DRAWING : 4 SHEETS 4856

[PART III-SEC . 2 THE GAZETTE OF INDIA, NOVEMBER 29 , 2003 ( AGRAHAYANA 8 , 1925 )

Ind.Cl.:

201 C

191406 IntCI 4 :

C02 F -1 / 00 C 02 F - 9 / 00

"A WATER TREATMENT PLANT "

APPLICANT(S) :

S & S INDUSTRIES AND ENTERPRISES

LIMITED, AARTI CHAMBERS , SECOND

FLOOR , 189 ANNA SALAI , MADRAS 600006 , TAMIL NADU , INDIA COMPANY.

INVENTOR( S) :

1. MANDAYAM OSURI SRINIVASAN .

809/MAS/ 95

Application No.

filed on 03-Jul-95

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4, PATENTS RULES, 2003) PATENT OFFICE, CHENNAI BRANCH .

3 CLAIMS

A water treatment plant comprising a skid mounted assembly of a raw water feed pump for pumping the water to be treated from a source into the said plant ; first and second dosing systems provided with metering pumps for adding metered quantities of alum and sodium hypochlorite to the raw water ; a sand filter into which the water treated with alum and sodium hypochlorite is pumped ; an activated carbon filter into which the water from the sand filter is sent ; a third dosing system provided with a metering pump for adding metered quantities of sodium hexa- meta -phosphate to the water ; a micron filter for further filtering the water thereafter ; a fourth dosing system provided with a metering pump for adding metered quantities of dilute hydrochloric acid to the water ; a high pressure pump for passing the water through reverse osmosis membranes ; a fifth dosing system provided with a metering pump for adding metered quantities of soda ash to the water after leaving the said membranes and before being pumped into a storage tank; and a control panel for the electrical /electronic operation of the plant circuitry .

809/9/0/95

COMP.SPECN : 9 PAGES DRAWING : 1 SHEET.

4857

( AGRAHAYANA 8. 1925)

THE GAZETTE OF INDIA , NOVEMBER 29. 2003

PART III-SEC . 2 ]

191-407

172C 9

Ind . Cl . :

D01G - 7 / 06

IntCI :

"A BLOW ROOM TEXTILE CLEANING MACHINE HAVING GRID OSCILLATING MEANS "

LAKSHIMI MACHINE WORKS LIMITED

APPLICANT( S ) :

AN INDIAN COMPANY OF PERIANAICKENPALAYAM COIMBATORE 641020 TAMIL NADU .

1. K.B. KRISHNAN .

INVENTOR( S) :

16-Aug -95 INDIA

1046 MAS 95 FILED ON

APPLICATION NO :

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4, PATENTS RULES, 2003 ) PATENT OFFICE , CHENNAI BRANCH .

20 CLAIMS

Ablow room textile cleaning machine having grid oscillating means comprising a plurality of grid bars provided beneath the beater rollers of the said cleaning machine , the said grid bars constituting grid assemblies mounted on the front and rear side of the frame of the said machine , the said grid assemblies being provided with grid oscillating means for imparting oscillatory movement to the grid bars .

10 ⑤

FIG- 2

COMP.SPECN : 13 PAGES DRAWING : 7 SHEETS .

4858

THE GAZETTE OF INDIA , NOVEMBER 29 , 2003 ( AGRAHAYANA 8 , 1925 ) [PART III-SEC. 2

Ind . Cl . :

191408 Int CI :

D 06 M 11/00

"A SOLVENT SIZING PROCESS FOR IMPROVING THE MECHANICAL PROPERTIES OF TEXTILE MATERIAL "

THE SOUTH INDIA TEXTILE RESEARCH

AFPPLICANT(S) :

ASSOCIATION AERODROME POST

COIMBATORE 641014 TAMIL NADU (AN INDIAN SOCIETY REGISTERED UNDER THE SOCIETIES REGISTRATION ACT , 1860) .

1. INDRA DORAISWAMY ;

INVENTOR( S) :

2. S. RAJENDRAN;

3. S.S. RAMASAMY;

4. S.P. MISHRA .

APPLICATION NO :

1185 MAS95 FILED ON

12-Sep-95

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4, PATENTS RULES, 2003 ) PATENT OFFICE, CHENNAI BRANCH .

14 CLAIMS

A solvent sizing process for improving the mechanical properties of textile material comprising impregnating textile material in a solvent system consisting of a di or tri halogenated acetic acid dissolved in a di or tri halogen substituted alkane or alkene at ambient temperature , removing the unabsorbed solvent system therefrom in a known manner and subsequently drying the said treated textile material in a known manner.

COMP.SPECN : 12 Pages ; DRAWING : NIL SHEETS .

4859 THE GAZETTE OF INDIA , NOVEMBER 29 , 2003 ( AGRAHAYAN.A 8. 1925 )

PART III-SEC . 2

50F

Ind.Cl.:

191409

F 25B 23/00

IntC!4:

F 25 D 31/00

F 25B 19/00

"A PRESSURE CONTROLLED WATER EVAPORATIVE REFRIGERATION SYSTEM "

INDIAN SPACE RESEARCH ORGANISATION

APPLICANT( S) :

DEPARTMENT OF SPACE

ANTARIKSH BHAVAN NEW BEL ROAD BANGALORE - 560 094 INDIA, AN ORGN . OF THE GOVT. OF INDIA

1. SURESH RAMACHANDRA NAIK

INVENTOR( S) :

2. ΚΑΝΝΑΝ KATHIRVEL

3. NARASIMHAN NARAYANAN

4. SUSHIL KUMAR SHUKLA

5. DILIP KUMAR RAMANLAL PATEL

6. KARTIKEY DINKERBHAI GANDHI

7. DAHYABHAI GOVINDBHAI RATHOD

8. VIMAL KUMAR SAINI

filed on 16-Jan -96

70MAS 96

Application No.

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES , 2003 ) PATENT OFFICE , CHENNAI BRANCH .

9 CLAIMS

A pressure controlled water evaporative refrigeration system comprising a vacuum vessel having water inlet , a base plate disposed horizontally to the base of the said vacuum vessel , a plurality of metallic fins extending downwardly from the said base plate to be at least partially immersed in the water contained in the vacuum vessel and evacuating means for evacuating the said vacuum vessel .

COMP . SPECN , : - 9 PAGES DRAWINGS : 1 SHEET

FIG -1

10-347 G1/2003 4860

[PART III-SEC . 2 THE GAZETTE OF INDIA, NOVEMBER 29 , 2003 ( AGRAHAYANA 8 , 1925)

Ind. Cl .:

32E

191410 IntCI :

C 08 F 118/04

"A PROCESS FOR THE PREPARATION OF POLYVINYL ALCOHOL ALGINATE COMPOSITE MATRIX "

APPLICANT( S) :

SREE CHITRA TIRUNAL INSTITUTE FOR MEDICAL SCIENCES & TECHNOLOGY, SATELMOND PALACE , TRIVANDRUM 695 012 , KERALA STATE AN INDIAN INSTITUTE.

INVENTOR( S):

1. KUNNATHEERY SREENIVASAN ;

2. KOTHANDARAMAN RATHINAM;

3. RAJAGOPALAN SIVAKUMAR .

APPLICATION NO :

1586 MAS 96

Filed on

11-Sep -96

Complete Specification Left on 8 -Dec-97

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4, PATENTS RULES , 2003 ) PATENT OFFICE , CHENNAI BRANCH .

8 CLAIMS

A process for the preparation of polyvinyl alcohol alginate composite matrix comprising in the steps of Preparing a 1.5 to 5% by weight of a solution of polyvinyl alcohol (PVA) , followed by mixing the solution with 0.5 to 1.5% by weight of sodium alginate and stirring the mixture while heating at a temperature in the range of 30-45 ° C ; adding a solution of 0.5 to 2% by weight of silver nitrate , nitric acid and 0.4 to 1.2 ml of glutaraldehyde to the mixture ; stirring the mixture and curing at 50 to 70° C to obtain films of the composite matrix, optionally washing the firms with water followed by an alcohol and drying .

PROV.SPECN : 6 PAGES COMP.SPECN : 7 PAGES DRAWING: NIL SHEETS .

PART III-SEC . 2]

4861 THE GAZETTE OF INDIA , NOVEMBER 29 , 2003 ( AGRAHAYANA 8 , 1925)

160 A

Indian Classification

191411 4

International Classification

B60J 7/00 , B60J 11/00

Title

" A RETRACTIBLE SHADINHG DEVICE FOR MOTOR VEHICLES . "

Applicant

Ramesh Chander Manchanda s/ o Late Shri Mohan Lal R/ o D - 1 / 1198 Vasant Kunj , New Delhi - 110070 , India.

Inventors

RAMESH CHANDER MANCHANDA - INDIA .

filed on 28-05-95 .

Application for Patent Number 559 /DEL/ 95

Complete left after provisional filed on 29.03.96

Appropriate office for opposition proceedings (Rule 4, Patents Rules 2003) Patent Office Branch , New Delhi - 110 008 .

( 8 Claims)

A retractable shading device for vehicle comprising a plurality of frames having a U shaped profiled , a water proof fabric cover movable attached in conformity with the said frames to provide a cover to the said vehicle when in open position characterized in that the said device is provided with means connected to the base of the said vehicle on both side thereof for operating the said frame structure and providing the cover to the said vehicle, means for folding the said frame along with said fabric cover when the vehicle is in movement .

(Complete Specification Pages 09 Drawing Sheets -5)

Provisional Specification Pages 4 Drawing sheets- nil

THE GAZETTE OF INDIA . NOVEMBER 29. 2003 ( AGRAHAYANΑ 8 , 1925)

126 D

Indian Classification

191412

B03 C 9/00

International Classification4

Title

"An Electrostatic Precipitator . "

Apolicant

ERDEC CO . LTD . , of 1-55 , Matsumi - cho , Sakata - shi , Yamagata- ken998, Japan .

Inventors

KATSUTOSHI - KURITA -JAPAN , KEIICHI - HARA -JAPAN .

filed on

30/01/1995

122/Del/1995

Application for Patent Number

Appropriate office for opposition proceedings (Rule 4, Patents Rules , 2003 ) Patent Office , New Delhi Branch 110 008 .

(Claims

03)

a An electrostatic precipitator comprising: a plurality of arrays (8) of spaced parallel dust- collecting electrodes (2) , each array having a plurality of rectangular dust- collecting electrodes (2) so juxtaposed to each other as to have their faces placed vertically and opposed to each ther first spacing adjusting means (7) for fixing said rectangular dust- collecting electrodes in each array at a predetermined spacing from each other , said arrays of dust- collecting electrodes being provided sequentially at a predetermined spacing from each other whereby the faces of said dust- collecting electrodes are parallel to the flow direction of a gas: plurality of arrays ( 10) of discharge electrodes (6) , each array ( 10) having a pluality of rectangular discharge electrodes (6) , said discharge electrodes (6) being so juxtaposed to ech other asto have their faces placed vertically and opposed to each other; and second spacing- adjusting means (9) for fixing said rectangular discharge electrodes (6) in each array ( 10 ) at a predetermined spacing from each other; and said arrays (10 ) of the discharge electrodes (6) being sequentially provided at a predetermined spacing from each other so that the faces of bald discharge electrodes are directed in parallel with the gas flow direction , Characterised in that each array ( 10) of the discharge electrodes (6) is interposed at a predetermined spacing between the adjacent two arrays ( 8) of the dust- collecting electrodes (2) groups; each discharge electrode (6) has saw-toothed portions at alternate edges ; and the predetermined sracing between said dust collecting electrodes or said discharge electrodes by said first or second spackjing - adjusting means is sequentially narrowed from the upstream side to the downstream side of the electrostatic precipitator , in said gas flow direction .

FIG.1

2 13 6 ба

Drawings Sheets

No of Pages

Complete Specification PART III -SEC . 2]

4863 THE GAZETTE OF INDIA , NOVEMBER 29 , 2003 ( AGRAHAYANA 8 , 1925)

Indian Classification

29B

191413 International Classification

:- B65 Η 9/04

Title

: - "A paper presentation apparatus for an automated teller machine, "

: -

Applicant

Interbold , a New York partnership , Unites States of America , of 5995 Mayfair Road , North Canton, Ohio 44720, United States of America, whose partners are Diebold Holdings Company , Inc. , c/o Diebold , Inc. , a Delaware Corporation of 818 Mulberry Road SE , Canton , Ohio 44711 , United States of America and SSTJ Corporation , c/ o International Business Machines Corp. , a New York corporation of 44 South Broadway, White Plains , New York 10604 , United States of America .

inventors

TUYEN VAN PHAM -U.S.A. KEVIN - HENDERSON -U.S.A , THOMAS SCOTT MAZON -U.S.A.

Applicationfor Patent Number

208/Del/1995

10/02/95

filed on

Appropriate office for opposition proceedings (Rule 4 , Patents Rules, 2003 )Patent Office, New Delhi Branch - 110 008 .

( Claims 26)

A paper presentation apparatus for an automated teller machine, characterized in that the paper presentation apparatus comprises : a movable first belt , a movable second belt extending parallel of said first belt , a paper stop , and a mechanism interconnecting said paper stop and said first belt , wherein as said paper stop is moved away from said second belt , said first belt is moved toward said second belt , and vice versa .

36.

FIG . 1

Complete Specification

Drawings Sheets

No of Pages 4864

[PART III-SEC . 2 THE GAZETTE OF INDIA , NOVEMBER 29 , 2003 (AGRAHAYANA 8 , 1925 )

191414 Ind. Cl

197

Int. Cl.4 : A47L 13/00+ 13/36 .

Title

AQUEOUS HARD SURFACE CLEANING COMPOSITION .

Applicant : RECKITT & COLMAN INC . , a Delaware corporation of 225 Summit Avenue , Montvale , New Jersey: 07645 , United States of America.

Inventor : MICHAEL CRISANTI ( USA ) .

Application for Patent no . 2184 /Del/96 filed on 7.10.96.

Convention date 25th Oct. , 95 & 17th June , 96/9521829.3 & 9612645.3 ( Great Britain) .

Appropriate office for opposition proceedings (Rule 4 , Patents Rules , 2003 ) Patent Office Branch, New Delhi - 110005.

(8Claims)

An aqueous hard surface cleaning composition which comprises :

0.1-10% by weight of an acid sequestrant constituent;

0.1-10% by weight ofa mixture of hydrophobic and hydrophilic solvents ;

1--8% by weight ofa surfactant and/ or hydrotrope constituent; .

0-20% by weight of one or more optional constituents ;

the balance to 100% by weight , water

and optionaly a gelling agent

wherein the aqueous hard surface cleaning composition exhibits a pH of 7.0 or less .

(Complete Specification : 24 pages Drawing 2 sheets ) PART III -SEC . 2]

4865 THE GAZETTE OF INDIA, NOVEMBER 29 , 2003 ( AGRAHAYANA 8 , 1925 )

Indian Classification

55E4

191415

International Classification

A 61K -031/57 ; C07J- 013/00.

Title

" A PROCESS FOR THE ISOLATION OF A LIPID FRACTION CONTAINING Z & E. GUGGULSTERONES USEFUL FROM AERIAL BRANCHES OF COMMIPHORA WIGHTII (GUGGUL ) " .

Applicant

COUNCIL OF SCIENTIFIC AND INDUSTRIAL RESEARCH , Rafi Marg , New Delhi - 100 001 , India, an Indian registered body incorporated under the Registration of Societies Act (Act XXI of 1860) .

Inventors

DR. SANTOSH KUMAR AGARWAL

DR . TAJUDDIN

MOHAMMAD SHAFIQ SIDDIQUI

DR SUSHIL KUMAR ASHOK KUMAR KHANNA DR. RAMESH CHANDER - ALL INDIAN .

Application for Patent Number 242 /DEL/ 1999 filed on 12/02/1999

Appropriate office for opposition proceedings (Rule 4, Patents Rules , 2003) 'Patent Office Delhi Branch , New Delhi - 110008 .

(07 Claims)

A process for the isolation of a lipid fraction containing z & e guggulsterones useful from aerial branches of Commiphora wightii (guggui ) which comprises , drying and powdering the aerial part of the plant C. wightii , soaking or extracting by known methods as herein described the powdered material with non- polar solvent, removing the suspended impurities by either filtering and concentrating the extracted material by known methods as herein described to obtain a thick viscous extract , purifying the extract by using organic eluant by gel filteration/ silica gel chromatography to obtain the desired lipid fraction containing Z & E guggulsterones .

(Complete Specification Pages 09 Drawing NIL Sheet ) [PART 111- SEC . 2 THE GAZETTE OF INDIA , NOVEMBER 29 , 2003 ( AGRAHAYANA 8 , 1925 )

4866

191416

55E4

Indian Classification :

C 07D - 239/28 ; 544/314

International Classification :

Title

" A PROCESS FOR THE SYNTHESIS OF NEW HETEROCYCLICSUBSTITUTED SULFAMIDES USEFUL AS ANTIBACTERIAL AGENTS" .

Applicant

COUNCIL OF SCIENTIFIC AND INDUSTRIAL RESEARCH , Rafi Marg , New Delhi - 100 001. India, an Indian registered body incorporated under the Registration of Societies Act (Act XXI of 1860 ) .

KAKULAPATI RAMA RAO

Inventors

YADAVALLI VENKATA DURGA NAGESWAR JHILLU SINGH YADAV KAISER JAMIL PEDDI SRINIVASA REDDY - ALL INDIAN Application for Patent Number 578 /DEL/ 1999 filed on 15/04/1999

Appropriate office for opposition proceedings ( Rule 4, Patents Rules , 2003 ) Patent Office Delhi Branch , New Delhi - 110008 .

(05 Claims)

A process for the synthesis of new heterocyclicsubstituted sulfamides useful as antibacterial agents of the formula 5 as shown in the drawing accompanying this specification wherein RH of alkyl or alkoxy and R2- aromatic or heterocyclic moity which comprises reacting Imethyl - 2 - pyrrolidone of formula 1 with chlorosufonylisocyanate of formula 2 in presence of aliphatic chloro solvent at room temperature to obtain 2- ( chlorosulfonyl imino ) - Imethylpyrrolidine of formula 3 then condensing toe above compound of the formula 3 with aromatic /substituted aromatic heterocyclic amines of formula 4 wherein R1 & R2 has the meaning given above at 25 to 40 ° C at least for 12 hrs , washing drying and recovering the heterocyclic substituted sulfamides .

(Complete Specification Pages 15 Drawing NIL Sheet ) 4867 PART III-SEC . 2] THE GAZETTE OF INDIA , NOVEMBER 29 , 2003 ( AGRAHAYANΑ 8 , 1925)

191417 Indian Classification :

32F(3b)

C07C 51/12

International Classification 7

Title

"AN IMPROVED PROCESS FOR THE PREPARATION OF 2-ARYL PROPIONIC ACIDS . "

Applicant

INDUSTRIAL COUNCIL OF SCIENTIFIC AND RESEARCH , Rafi Marg , New Delhi - 110 001 , INDIA , an Indian body incorporated under the Registration of Societies Act (XXI of 1860) .

Inventors

RAGHUNATH VITTHAL CHAUDHARI INDIAN SEAYAD ABDUL - INDIAN JAYASREE SEAYAD - INDIAN

Application for Patent Number 685 /Del/ 99 filed on 5th May 1999.

Appropriate office for opposition proceedings (Rule 4 , Patents Rules, 2003 ) Patent Office Branch, New Delhi - 110.008 .

( 10 Claims )

An improved process for the preparation of 2- aryl propionic acids which comprises reacting an alcohol having the general formula I,

R4

R-C-Rs

R

-R2

OH

Formula 1

wherein R₁ may be aryl , substituted aryl , naphthyl or substituted naphthyl , R2 , R3 , R4 and Rs may independently be hydrogen , aryl , arylalkyl , cycloaliphatic with or without substituents , analkyl metal halide per gram mole of catalyst in the range of 5 to 500 moles , an organic sulfonic acids , per gram mole of catalyst in the range of 5 to 500 moles , water with concentration in the range of 1 to 6% (v/v) of total reaction mixtureamd the palladium catalyst in the concentration range of one mole of catalyst for every 50 to 50,000 moles of the compound having formula I , in an organic solvent such as ketones , or cyclic ethers in the carbon monoxide atmosphere under , homogenous conditions , at a temperature ranging between 30 to 130 ° C , for a period ranging between 0.3 to 2 hrs , at pressures ranging between 50 to 1500 psig, cooling the 11-347 GI/2003 [PART III-SEC . 2 THE GAZETTE OF INDIA , NOVEMBER 29 , 2003 ( AGRAHAYANA 8 , 1925)

4868

reaction mixture to ambient temperature, flushing the reaction vessel with inert gas , removing the solvent by conventional methods , separating the catalyst and isolating 2- aryl- propionic acid of formula II

-Rs

-R2

COOH

Formula II

(Complete Specification 23 Pages Drawings 1 Sheet ) 4869 PART III-SEC . 2] THE GAZETTE OF INDIA, NOVEMBER 29. 2003 ( AGRAHAYANA 8 , 1925)

191418 Indian Classification

55E4

International Classification

A 61 K 31/00

Title

" A PROCESS FOR THE PREPARATION OF 4- ( R ) -HYDROXY CYCLOPENT- 2 - en - 1 (S)- ACETTE " .

Applicant

COUNCIL OF SCIENTIFIC AND INDUSTRIAL RESEARCH , Rafi Marg, New Delhi - 100 001 , India, an Indian registered body incorporated under the Registration of Societies Act(Act XXI of 1860).

Inventors

KULBHUSHAN BALWANT BASTAWADE

DIGAMBER VITTHAL GOKHALE

THOTTAPPILLIL RAVINDRANATHAN SANDEEP RAGHUNATH GHORPADE ROHINI RAMESH JOSHI UTTAM RAMRAO KALKOTE- ALL INDIAN Application for Patent Number 731 /DEL/ 1999 filed on 14/05/1999

Appropriate office for opposition proceedings (Rule 4, Patents Rules , 2003 ) Patent Office Delhi Branch, New Delhi - 110 008 .

(05 Claims)

A process for the preparation of 4-(R ) -hydroxy cyclopent- 2en- 1 (S)-acetate which comprises reacting meso -cyclopent-2- en- 1,4-diacetate of formula 1 as shown in the drawing accompanying the specification with enzyme such as herein described in a buffer containing protic organic solvent at temperature ranging between 25 -30 ° C for a period ranging from 10- 16 hrs, extracting the mixture with non - aromatic organic solvent, separating the organic layer and removing the solvent by conventional methods as herein described to obtain-4-(R) hydroxy cyclopent - 2 -en - 1 (S) -acetate.

(Complete Specification Pages 10 Drawing 01 Sheet ) [PART III-SEC . 2 THE GAZETTE OF INDIA, NOVEMBER 29 , 2003 ( AGRAHAYANA 8. 1925)

4870

191419

32C, 54

Indian Classification

С 09 В 61/00 .

International Classification

Title

" A PROCESS FOR THE PREPARATION OF VEGETABLE BASED NATURAL FOOD COLOUR FROM COCCINEA INDICA " .

Applicant

COUNCIL OF SCIENTIFIC AND INDUSTRIAL RESEARCH , Rafi Marg , New Delhi - 100 001 , India, an Indian registered body incorporated under the Registration of Societies Act(Act XXI of 1860) .

Inventors

SUNITA MEHROTRA TUMMALA JYOTHIRMAYI DUBASI GOVARDHANA - ALL INDIAN Application for Patent Number 1493 / DEL/ 1999 filed on 18/11/1999.

Appropriate office for opposition proceedings (Rule 4, Patents Rules , 2003 ) Patent Office Delhi Branch , New Delhi - 110008 .

(06 Claims)

A process for the preparation of vegetable based natural food colour from Cocinea indica which comprises grinding ripe Coccinea indica by known methods to obtain a pulp, drying the plup by conventional methods to bring down the moisture content to below 5 % , extracting with the solvent such as herein described separating the coloured solution and residue by known methods , recovering the solvent to obtain the food color .

( Complete Specification Pages 10 Drawing NIL Sheet) PART III-SEC . 2]

4871 THE GAZETTE OF INDIA , NOVEMBER 29 , 2003 ( AGRAHAYANA 8 , 1925)

Indian Classification

123

191420 International Classification

C 05C 009./00

Title

" A PROCESS FOR PREPARING A BIO- FERTILIZER CUM BIO - FUNGICIDAL COMPOSITION .

Applicant

INDIAN COUNCIL OF AGRICULTURAL RESEARCH, Krishi Bhawan , Dr. Rajendra Prasad Road, New Delhi - 110001 . An Indian registered body incorporated under the Registration of Societies Act (Act XXI of 1860 ).

Inventors

BINEETA SEN

JYOTSANA SHARMA

SHAHANA MAJUMDER

KRISHANU MUKHERJEE

SANJEEV KUMAR

KATHITHACHALAM ANGAPPAN

GOUTAM MONDAL CHIRANTAN CHATTOPADHYAY - ALL INDIAN .

Application for Patent Number 1584 /DEL/ 1999 filed on 29/12/1999

Appropriate office for opposition proceedings (Rule 4 , Patents Rules , 2003 ) Patent Office Delhi Branch , New Delhi - 110 008 .

(03 Claims )

steps of: A process of preparing bio - fertilizer cum bio - fungicidal composition as comprising the growing Aspergillus niger AN 27 in a medium containing molasses and yeast extract at 27-35 ° C upto 72 hours ,

separating the biomass by filtration,

mixing said biomass with talcum powder in the ratio 1: 2 ,

drawing said mixture below 50° C to bring the mixture to 3 -12 % moisture , and adding the sticker carboxymethyl cellulose in 0.1-1.0 % w/w to form the composition.

(Complete Specification 14 Pages Drawing 03 Sheets ) [PART III-SEC . 2 4872

THE GAZETTE OF INDIA. NOVEMBER 29, 2003 ( AGRAHAYANA 8. 1925)

191421

40B; 39N

Indian Classification

B 67 D 5/64

International Classification :

Title

" A PROCESS FOR PRODUCING A POURING DEVICE" .

Applicant

VESUVIUS FRANCE SA, a French company of 68 , rue Paul Deudon -BP 19, 59750 Feignies , France.

Inventors

ERIC HANSE - FRANCE . PHILIPPE DUMAS - FRANCE .

Application for Patent Number 1034/DEL/ 95 filed on 06/06/1995

Convention date:- 94 07413 ; 15/06/1994 ; 94 14337 ; 28/11/1994; FRANCE .

Appropriate office for opposition proceedings (Rule 4, Patents Rules, 2003 ) Patent Office Delhi Branch, New Delhi - 110 008 .

(03 Claims )

A process for producing pouring device for pouring steel comprising a body (2) made up of refractory material containing carbon, a first layer ( 10b) covering said body partially or completely, said layer ( 10b) being constituted by a refractory material containing at least 80% of alumina, sintering aids selected from calcined alumina, reactive calcined alumina , silica fumes , clays and particles of oxides of less then 50 microns , and at least 4% and no more 9% by weight of carbon , 1.5 to 6% of said carbon being in a graphite form and a second layer ( 10a) covering said first layer , said process comprising the steps of:

(a) copressing the body (2) and the first layer ( 10b) ; and

(b) heating the product obtained in step a) to ja temperature comprised between 1000 ° C to 1100 ° C in less than 20 minutes to transform the external part of the first layer into a second layer, the second layer being constituted by a refractory material containing at least 80% of alumiria, being dense and containing no carbon .

(Complete Specification 20 Pages Drawing 03 Sheets) 4873 PART III-SEC. 2] THE GAZETTE OF INDIA , NOVEMBER 29 , 2003 ( AGRAHAYAÑA 8 , 1925 )

144 E 4

Indian Classification

191422

International Classification7

: - C09 D 191/06, C 09 D 191/08 , C 09 D 5/03 , C 09 D 5/46 Title

A PROCESS FOR THE PREPARATION OF ELECTROSTATICALLY CHARGED PARTICLES AND ELECTROSTATICALLY CHARGED PRODUCED THERE FROM " PARTICLES Applicant :-

UNIVERSITY OF SOUTHAMPTON , a British Company . ofHighfield. Southampton SQ - 17 1 BJ , United Kingdom.

JOHN FARRELL HUGHES - U.K.

Inventors

16/06/1995

filed on

1117/del/1995

Application for Patent Number

Convention Application No. 9413281.8 /UK/01.07.1994.

Appropriate office for opposition proceedings ( Rule 4, Patents Rules , 2003) Patent Office, New Delhi Branch - 110 008.

(Claims 10)

A process for the preparation of electrostatically charged particles of a high resistivity material which process comprises incorporating a unipolar charge into the material at a temperature at or above the glass transition temperature thereof or above the melting - point thereof, the said unipolar charge being incorporated into the bulk of the material and the charged material being subsequently comminuted, or the said charge being incorporated into the material whilst forming particles thereof.

FIG.3.

(Complete Specification

No of Pages 11

Drawings Sheets - 01 [PART III-SEC . 2 4874

THE GAZETTE OF INDIA , NOVEMBER 29, 2003 ( AGRAHAYANA 8 , 1925 )

191423

101F

Indian Classification :

C 07C 31/22 , C07C 27/00

International Classification

Title

" AN IMPROVED PROCESS FOR THE PREPARATION OF NON OIL , WATER FREE HYDRAULIC FLUID " .

Applicant

THE CHIEF CONTROLLER, RESEARCH & DEVELOPMENT ORGN . , Ministry of Defence, Government of India, B - 341 , Sena Bhawan , DHQ P.O. , New Delhi - 110 011 .

Inventors

SARVASHRI GURU CHARAN GUPTA RAJENDRA KRISHNA NIGAM ALOK KUMAR GHOSH- ALL INDIA .

Application for Patent Number 1284/DEL/ 1995 filed on 10/07/1995

Appropriate office for opposition proceedings (Rule 4 , Patents Rules, 2003 ) Patent Office Delhi Branch , New Delhi - 110008 .

(10 Claims)

An improved process for preparation of non - oil , water - free hydraulic fluid comprising in the step of: -

(a) introducing 60 % by weight of ethylene glycol , 15% by weight of polyethylene glycol and 25% by weight of glycerol, in sequential order , in a reaction vessel , adding ingredients of any known corrosion inhibitor as known in the conventional method and heating to a temperature of 100 °C;

(b) subjecting the said mixture to the step of cooling to temperature of 70 to 80 ° C and adding a dye to this mixture ;

(d) passing the mixture thus obtained in step (c) through horizontal plate filter press , obtaining the said hydraulic fluid.

(Complete Specification Pages 06 Drawing NIL Sheet ) 4875 THE GAZETTE OF INDIA, NOVEMBER 29 , 2003 (AGRAHAYANA 8 , 1925)

PART III - SEC . 2 ]

191424

107 G

Indian Classification : -

A612 9/00

International Classification4 :-

:-

"An Air Purifying Device ."

Title

Applicant

Uday Gupta , an Indian national of 4634 , Ajmeri Gate , Delhi -110 016, India .

UDAY - GUPTA -INDIA.

Inventors

10/03/1995

407/Del/1995

filed on

Applicationfor Patent Number

Complete left after Provisional Specification filed on

10/03/1995Complete filed on : 07/06/1996 Appropriate office for opposition proceedings (Rule 4, Patents Rules, 2003 ) Patent Office , New Delhi Brarich 110 008 .

(Claims 06)

An air purifyingdevice comprising a neon lamp (1 ) having a first and second terminal (2 & 3) provided therewith said first terminal (2) connected to the positive terminal of the battery or electronic supply mains through a high voltage supply means , characterized in that said second terminal (2) a metallic ring having a plurality of needle (49) secured therewith and provided around said neon lamp ( 1 ) in a spaced relationship thereto to be connected with the negative terminal of said battery.

Fig . 1

NIL

No ofPages

Drawings Sheets

Provisional Specification

Drawings Sheets

No ofPages

Complete Specification

12-347 GI/2003 4876

[PART III-SEC . 2 THE GAZETTE OF INDIA , NOVEMBER 29 , 2003 ( AGRAHAYANA 8, 1925)

Indian Classification

:- 108 B 1

191425 International Classification : - C21B 13/02

Title

:- "A Process for Producing Sponge Iron and an Apparatus . for Carrying out the Process . "

Applicant

:- Voest-Alpine Industrieanlagenbau GMBH, an Austrian company, of 44 Turmstrasse , A- 4020 Linz , Austria ..

Inventors

: - JORG - DIEHL - AUSTRIA; GERALD- ROSENFELLNER - AUSTRIA.

Applicationfor Patent Number

filed on

09/Del/1995

06/01/1995

Appropriate office for opposition proceedings (Rule 4, Patents Rules 2003 ) Patent Office, New Delhi Branch - 110 008.

(Claims

21)

A process for producing sponge iron from particulate iron- oxide - containing ore , characterized by the steps of:

reducing the iron- oxide- containing ore of the kind such as herein described to sponge iron in a reduction zone (4) by reacting the iron- oxide- containing material with a reducing gas of the kind such as herein described;

withdrawing the gas formed during reduction from the reduction zone (4) as a top gas;

subjecting the top gas to CO₂ purification , thereby forming a CO2 - containing offgas and a purified top gas; mixing the CO2 - containing offgas with an oxygen-containing gas and buming it ;

supplying the thermal energy produced by the CO2 - containing offgas to a consumer; and

recovering the sponge iron obtained in the first step from the reduction zone.

22'

FIG. 1

15180

1 Complete Specification

Drawings Sheets

No of Pages PART III-SEC. 2]

4877 THE GAZETTE OF INDIA , NOVEMBER 29, 2003 ( AGRAHAYANA 8 , 1925)

:- 186 E

191426

IndianClassification

7 International Classification'

Η 04 Ν 9/16 , Η 04 Ν 3/20 .

Title

" A SCREEN CONTROLLING METHOD AND SCREEN CONTROLLING DEVICE "

Applicant

SONY CORPORATION , of 7-35, Kitashinagawa 6-chome. Shinagawa- ku , Tokyo , Japan .

Inventors

NORIYUKI HITACHIYA - JAPAN

KUNIO HAKAMADA JAPAN

SUMIO BABA - JAPAN

YOSHIYUKI IDENAWA - JAPAN

HIROKATSU KUBOTA JAPAN

1269/del/1995 filed on

07/07/1995

Application for Patent Number

P 07-037756JP/03.02.1995 .

Convention Application No.

Appropriate office for oppositión proceedings ( Rule 4, Patents Rules , 2003) Patent

Office New Delhi Branch - 110 008.

(Claims

05)

A screen controlling method for use in a display device having a cathode- ray tube and an electron beam , comprising :

a step of outputting a signal used to display white on an entire screen of said cathode - ray tube to said display device employing the electron beam by turning off a power supply; and

a step of erasing displayed contents by removing a high voltage remaining in said display device employing the electron beam .

FIG, 3

VIDEO

TUNER

CRY

IP APIPYDR DETECTEIG UNPT

UNIT

PROCESSCA

DEFLECTICH

3/5

WENCRY

OU -SCREEN

НИСКОССMРUTЕР .

DISPLAY WEWOM

ECEPTION

TO RESPECTIVE 15

POWER SUPPLY

AC 100V

No ofPages

Drawings Sheets

Complete Specification 4878

[PART III-SEC . 2 THE GAZETTE OF INDIA , NOVEMBER 29 , 2003 ( AGRAHAYANA 8 , 1925)

32B

191427 Indian Classification :

International Classification " :

C 07 C 19/08 , C 07 17/08

Title

" A PROCESS FOR THE PRODUCTION OF HYDROFLUROALKANES . "

Applicant

INEOS FLUOR HOLDINGS LIMITED , a British company of First Floor Offices , Queens Gate , 15-17 Queens Terrace, Southampton, Hampshire ,SO14 3 BP , United Kingdom ,

Inventors

PAUL NICHOLAS EWING RICHARD LLEWELLYN POWELL CHRISTOPHER JOHN SKINNER MICHAEL ANTHONY DAVIES ALL BRITISH

Application for Patent Number 1961 /del/95 filed on 26.10.95 .

CONVENTION APPLICATION NO . 9421619.9/UK/ 27.10.1994

9425929.8 /UK/22.12.1994

Appropriate office for opposition proceedings (Rule 4, Patents Rules , 2003 ) Patent Office Branch , New Delhi - 110 005.

(11 Claims)

A process for the production of a hydrofluoroalkane which comprises contacting in a manner such as herein described a hydrochlorofluoroethane having the formula CCIXYCFHZ or a hydrochlorofluoroethane having the formulaCC1A = CFZ in which X and Y are each independently chlorine or fluorine, Z is chlorine or hydrogen and A is chlorine or fluorine provided that where each of X and Y is fluorine then Z is hydrogen , in the vapour phase with hydrogen fluoride and fluorination catalyst and recovering in a manner such as herein described a hydrofluoroalkane from the resulting products, the said process is carried out at a temperature of at least 180° C and pressure of upto 30 bar.

( COMPLETE SPECIFICATION 16 SHEETS DRAWING SHEETS - NIL -) 4879 THE GAZETTE OF INDIA, NOVEMBER 29 , 2003 ( AGRAHAYANA 8 , 1925 )

PART III- SEC . 2]

191428

170 A

Indian Classification

C11D 1/00

International Classification '

Title

" A LAUNDRY DETERGENT BAR COMPOSITION ." Applicant

THE PROCTER & GAMBLE COMPANY , a corporation organized and existing under the laws of the State of Ohio, United States of America, of one Procter & Gamble Plaza, Cincinnati , Ohio 45202 , U.S.A.

EMANUEL PANTELIS FAKOUKAKIS - U.S.

Inventors

MA . AMELITA GONZALES MIRASOL - PH

ISAURO MANUEL E. MISAJON - PH

Application for Patent Number 589/Del/95 filed on 30th March 1995

Convention date 28.3.1995/ 50202/ PH

Appropriate office for opposition proceedings (Rule 4, Patents Rules , 2003 ) Patent Office Branch, New Delhi - 110008 .

( 12 Claims )

Alaundry detergent bar composition comprising

(a) from 10% to 60 % by weight anionic surfactant such as herein before described;

(b) from 5% to 60% by weight detergent builder such as hereinbefore described;

from 0.1 % to 2.0 % of a dye transfer inhibitor such as hereinbefore described; and (c)

(d) an effective amount of an optical brightener such as hereinbefore described in order to improve whiteness and dye transfer inhibition of clothes .

(Complete Specification 25 Pages Drawings Nil Sheets ) 4880

THE GAZETTE OF INDIA, NOVEMBER 29 , 2003 (AGRAHAYANA 8 , 1925) [PART III-SEC . 2

Indian Classification

191429

International Classification'

D04H 13/00

Title

" A PROCESS FOR PREPARING BIODEGRADABLE FIBRILS . "

Applicant

THE PROCTER & GAMBLE COMPANY , a corporation organized and existing under the laws of the State of Ohio , United States of America , of one Procter & Gamble Plaza , Cincinnati , Ohio 45202 , U.S.A.

Inventors

REINHOLD AUGUST LAMPE - U.S.A

ISAO ( NMN ) NODA - JAPAN MICHAEL MATTHEW SATKOWSKI - U.S.A

Application for Patent Number 269/Dei/95 filed on 20th Feb. 1995

Convention date 28.2.1994/ 08/203260 / U.S.A

Appropriate office for opposition proceedings (Rule 4, Patents Rules , 2003 ) Patent Office Branch, New Delhi - 110 008 .

( 7 Claims )

A process for preparing biodegradable fibrils comprising :

a) forming a liquid resin mixture by melting or solvating the resin or resins as herein described; and

b) introducing the liquid resin mixture to a flow of a gaseous substance as herein described characterized in that the resin is selected from one or more biodegradable homopolymeric or copolymeric resins to form biodegradable fibrils.

(Complete Specification 29 Pages Drawings Nil Sheets ) PART III-SEC . 2]

4881 THE GAZETTE OF INDIA , NOVEMBER 29, 2003 ( AGRAHAYANA 8 , 1925)

170

Indian Classification

191430

International Classification 7

CIID 11/00 C11D 17/00

Title

" A FOAMED DETERGENT COMPOSITION FOR CLEANING TEXTILES . "

Applicant

THE PROCTER & GAMBLE COMPANY, a corporation organized and existing under the laws of the State of Ohio , United States of America , of one Procter & Gamble Plaza, Cincinnati , Ohio 45202 , U.S.A.

Inventors

JEAN WEVERS - BELGIUM

Application for Patent Number 528 /Del/ 95 filed on 23rd March 1995

Appropriate office for opposition proceedings (Rule 4, Patents Rules , 2003 ) Patent Office Branch, New Delhi 110.008 .

( 11 Claims )

A foamed detergent composition for cleaning textiles comprising a dispersed gas phase as herein described and a continuous liquid phase wherein the said continuous liquid phase comprising at least 50% by weight of the composition a surfactant , the surfactant consisting of anionic surfactant and , optionally , nonionic surfactant, 0-5% by weight of the composition a chelating agent and the foamed composition is having a density of less than 100 grams per liter .

(Complete Specification 27 Pages Drawings Nil Sheets ) [PART III ----SEC. 2 THE GAZETTE OF INDIA, NOVEMBER 29 , 2003 (AGRAHAYANA 8 , 1925 )

4882

AMENDMENT PROCEEDINGS UNDER SECTION 57 OF THE PATENTS ACT, 1970 In pursance of leave granted under Section 57 of the Patents Act , 1970 Patent Application No. 598/ DEL/ 91 ( 187000 ) of ZENECA LIMITED a British Company of Inperial Chemcial House, Millbank , London SW1P 3 JF, England has been allowed to proceed at the address of ZENECA LIMITED , a British Company, of 15 Stanhope Gate , London WIY 6 LN, England.

in pursance of leave granted under Section 57 of the Patents Act , 1970 Patent Application No. 598 / DEL/91 ( 187000) of ZENECA LIMITED a British Company of 15 Stanhope Gate , London W1Y 6 LN, England has been allowed to proceed in the name of SYNGENTA LIMITED , a British Company, of Fernhurst , Haslemere , Surrey, GU27 3 JE , England.

Amendment Under Section 57

Under the heading " Complete Specification Accepted " in the Gazette of India , Part - III , Section 2 of dated 14th December , 2002 on page 3103 in the Patent No. 189052 .

(Application No. 1417/Del/ 1993 )

Pleased Read

Applicant Name as :

"ΕΧΧΟΝΜΟBIL CHEMICAL PATENTS , INC . , "

Instead of

" EXXON CHEMICAL PATENTS , INC . , "

PROCEEDINGS UNDER SECTION 20 ( 1 ) OF : THE PATENTS ACT, 1970

In pursuance of leave, granted under Section 20 ( 1 ) of the Patents Act , 1970 , Patent Application No. 598 / DEL / 91 ( 187000) ) filed by SYNGENTA LIMITED , of Fernhurst , haslemere , Surrey, GU27 3JE, England has been allowed to proceed in the name of AVENCIA LIMITED , a British Company of Hexagon House , Backley , Manchester , M9 8ZS , England .

OPPOSITION PROCEEDING ( U/ S. , 25 )

The opposition as entered by Mr. Pavuluri Rama Lakshmana Rao, Hyderabad - 500 028 to the grant of a Patent on Application No. 177423 ( 62 /BOM/ 1993 ) made by Mr. Vinay Kumar Shridhar , Pune -411 004 as notified in Gazette of India , Part III Section 2 dated 11.05.1996 has succeeded & no patent shall be granted on the said application .

OPPOSITION PROCEEDINGS

The opposition as entered by Mrs. Vandana S. Bhide , Pune - 411 030 to the garnt of a Patent on Application No. 187163 ( 581/BOM/ 1999 ) made by National Institute of Virology, Pune as notified in Gazette of India, Part III , Section 2 dated 23rd February, 2002 has been dismissed and it is ordered that the application for Patent No. 187163 shall proceed to sealing in prescribed manner .

RESTORATON UNDER SECTION 60 OF THE PATENTS ACT, 1970

Notice is hereby given that an application for restoration of Patent No. 172096 made by Class OHG on 5.11.2001 has been allowed and the said patent is restored .

4883 THE GAZETTE OF INDIA, NOVEMBER 29 , 2003 (AGRAHAYANA 8 , 1925 )

PART III-SEC . 2]

Notice is hereby given that an application for restoration of Patent No. 179504 made by Dasarathi Bhimchandra Samanta & Ors . on 9.8.2002 has been allowed and the said patent is restored.

Notice is hereby given that an application for restoration of Patent No. 180687 made by General Motors Corporation on 17.6.2002 has been allowed and the said patent is restored.

Notice is hereby given that an application for restoration of Patent No. 184217 made by Daewoo Electronics Co. Ltd. on 16.7.2002 has been allowed and the said patent is restored.

Notice is hereby given that an application for restoration of Patent No. 186230 made by Dr. P. K. Bora and Dr. Diganta Sarma on 7.8.2002 has been allowed and the said patent is restored .

CANCELLATION PROCEEDINGS UNDER SECTION 19 (1 )

"An application in the name of M/ s . Asian Advertisers for Cancellation of Registered Design No. 189601 was filed on 9.9.03 in class 07-02 in the name M/s . THERMO PLAST INDUSTRIES ( P) LTD. " Cessation of Patents

184364 184392 185153 185729 185875 187599

Cessation of Patent (Mumbai )

179188

Cessation of Patent (Delhi )

186311

PATENTS SEALED ON 31.10.2003 ( KOLKATA)

189232 189235 189236 189237 189238 189239 189240 189241 189242 189243 189244 189231

189246 189249 189250 189276 189315

189245

DEL-02 ; KOL- 16 ; CHEN- NIL ; MUM-NIL .

PATENTS SEALED ON 13.10.2003 ( Mumbai Branch)

189569 189572 189573 189575 189576 189556 189562 189563 189564 189566 189567

189551

189614 189621 189623 189626 189590 189604

189607 189608 189609

189605

189613

189577

189629 189630 189779 189878 189886

189627 189628

PATENTS SEALED ON 22.10.2003 (Delhi Branch)

189178 189180 189195 189198 189201 1891202 189204 189205

189171 189174

13-347GI/2003 [PART III-SEC . 2 4884

THE GAZETTE OF INDIA . NOVEMBER 29 , 2003 ( AGRAHAYANA 8 , 1925 )

REGISTRATION OF DESIGNS

The following designs have been registered . They are open for public inspection from the date of registration . ( Colour combination if any, is not shown in the representation )

The dates shown in the following each entry is the date of registration .

Class 12-11 No.192539 . EASTMAN INDUSTRIES LTD . , C- 87 , PHASE - V , FOCAL POINT , LUDHIANA - 141010 (PUNJAB) , INDIA , AN INDIAN LIMITED COMPANY . " BICYCLE FRONT FORK" 7th July 2003 .

19-06

Class

A No. 191242 . ANAND INTERNATIONAL , REGISTERED INDIAN PARTNERSHIP FIRM AT 76, A & B , GOVT. INDUSTRIAL ESTATE , CHARKOP, KANDIVILI (W) , MUMBAI : -400 067, MAHARASHTRA , INDIA. " BALL PEN " 11th February 2003

Class 15-02 No. 192072 TOSHNIWAL INSTRUMENTS (MADRAS ) PVT . LTD. , ( AN INDIAN COMPANY) 267 , KILPAUK GARDEN ROAD , KILPAUK, CIIENNAI : -600 010, TAMILNADU, INDIA. " VACUUM PUMP " 8th May 2003

Class 15-02 No. 192071 . TOSIINIWAL INSTRUMENTS ( MADRAS ) PVT . LTD. , ( AN INDIAN COMPANY ) 267 , KILPAUK GARDEN ROAD , KILPAUK , CHENNAI : -600 010 , TAMILNADU , INDIA . " VACUUM PUMP " 8th May 2003 4885 PART III- SEC . 2] THE GAZETTE OF INDIA , NOVEMBER 29 , 2003 ( AGRAHAYANA 8 , 1925 )

Class. 12-11 No.192529. EASTMAN INDUSTRIES LTD ., C- 87 , PHASE -V , FOCAL POINT, LUDHIANA- 141010 (PUNJAB) , INDIA , AN INDIAN LIMITED COMPANY. " BICYCLE HANDLE BAR " 4th July 2003 .

Class 02-07 No.192541 . OSCAR METAL CRAFT ( P) LTD. , VILLAGEKOT SEKHON , 289, MILESTONE, G.T. ROAD , DORAHA , DISTT. LUDHIANA, ( PUNJAB) , INDIA, AN INDIAN PVT. LTD . COMPANY,. " PANT HOOK " 7th July 2003

Class 02-07

No.192540 . OSCAR METAL CRAFT ( P) LTD. , VILLAGEKOT SEKHON , 289 , MILESTONE , G.T. ROAD , DORAHA , DISTT. LUDHIANA, (PUNJAB) , INDIA, AN INDIAN PVT. LTD. COMPANY,. " PANT HOOK " 7th July 2003

Class 09-01 No.191930. M/ S. MULTIPLAST, 28 , ASHOK INDUSTRIAL ESTATE , L.B.S MARG , MULUND (W) , MUMBAI : -400 080, MAHARASHTRA, INDIA, AN INDIAN PARTNERSHIP FIRM. " BOTTLE " 23rd April 2003

Class 14-01 No.191238 . BOSE CORPORATION , A DELAWARE CORPORATION OF THE MOUNTAIN, FRAMINGHAM , MASSACHUSETTS 01701-9168, U.S.A. " LOUDSPEAKER GRILL" ( RECIPROCITY , U.S.A. ) 16th August 2002.

4886

[PART III- SEC . 2 THE GAZETTE OF INDIA . NOVEMBER 29 , 2003 ( AGRAHAYANA 8 , 1925)

Class 05-05 No.192127. GOLDTEX FURNISHING INDUSTRIES , 78/1197 , TRI NAGAR , DELHI - 110035 , INDIA , AN INDIAN PARTNERSHIP FIRM. " TEXTILE FABRIC " 20th May 2003 .

Class 09-01 No.191931 . M /S . MULTIPLAST, 28, ASHOK INDUSTRIAL ESTATE , L.B.S MARG , MULUND (W), MUMBAI : -400 080, MAHARASHTRA , INDIA, AN INDIAN PARTNERSHIP FIRM . " JAR" 23rd April 2003

Class 25-02 No.192291 . LARSEN & TOUBRO LIMITED, ECC DIVISION , MOUNT POONAMALLEE ROAD , ΜΑΝΑΡΑΚΚΑΜ , Ρ.Β.ΝΟ.979 , CHENNAI : -600 089, TAMIL NADU, INDIA , INDIAN NATIONAL . "PORTABLE ROOF STRUCTURE " 9th June 2003 .

Class 19-99 No. 191274. HINDUSTAN PENCILS LTD . , ( AN INDIAN COMPANY) 510 , HIMALAYA HOUSE , 79 , PALTON ROAD , MUMBAI : -400 001. " PENCIL SHARPENER " 13th February 2003

Class 07-04 No. 191990. TRINITY PLAST , HAVING ITS OFFICE AT UNIT 1 & 2 GEET GOVIND IND . ESTATE , NAVGHAR , VASAI ROAD, DIST .: THANE, 401202 , MAHARAS - HTRA, INDIA , INDIAN NATIONAL OF ABOVE ADDRESS. " CASSEROLE " 29th April 2003 .

4887 PART III--SEC . 2] THE GAZETTE OF INDIA , NOVEMBER 29. 2003 ( AGRAHAYANA 8 , 1925)

21-01

Class

No.191425. MICKEY TOYS, B- 67 , SECTOR- VI, NOIDA, U.P. , INDIA, AN INDIAN PROPRI- ETORSHIP FIRM, " ΤΟΥ " 5 March 2003

Class 21-01 No. 191426.. MICKEY TOYS, B-67 , SECTOR-VI, NOIDA , U.P. , INDIA, AN INDIAN PROPRI- ETORSHIP FIRM , " ΤΟΥ" 5 March 2003

28-03

Class

No.191382 . PRO VENTURE ( FAR EAST) LIMITED , OF UNIT B , 9/ F, WING ON CHEONG BUILDING, 5 WING LOK STREET, CENTRAL , HONG KONG , A COMPANY INCORPORATED IN HONG KONG . " HAIR TREATMENT DEVICE " (Reciprocity , U.S.A. ) 29th August 2002.

Class 09-01 No.190828. M/S . MCDOWELL & COMPANY LIMITED, ' LE PARC RICHMONDE " , 51 , RICHMOND ROAD , BANGALORE : -560 025, KARNATAKA - INDIA . " BOTTLE " 26th December 2002

Class 21-01 No.191424 . MICKEY TOYS, B- 67 , SECTOR-VI , NOIDA, U.P. , INDIA, AN INDIAN PROPRI- ETORSHIP FIRM, " ΤΟΥ" 5 March 2003 4888

[PART III-SEC . 2 THE GAZETTE OF INDIA , NOVEMBER 29 , 2003 ( AGRAHAYANA 8 , 1925 )

Class 09-01 No.191340 . HERBERTSONS LIMITED , EWART HOUSE , 22 , HOMI MODY STREET , MUMBAI : -400 023 , MAHARASHTRA, INDIA, AN INDIAN COMPANY. " BOTTLE " 21 " February 2003

Class 21-01 No.191423 . MICKEY TOYS , B -67 , SECTOR - VI , NOIDA, U.P. , INDIA, AN INDIAN PROPRI- ETORSHIP FIRM, " ΤΟΥ" 5 March 2003

19-99

Class

No. 191275. HINDUSTAN PENCILS LTD. , ( AN INDIAN COMPANY) 510, HIMALAYA HOUSE , 79 , PALTON ROAD, MUMBAI : -400 001. " PENCIL SHARPENER " 13h February 2003

Class 19-99 No.191276 . HINDUSTAN PENCILS LTD . , ( AN INDIAN COMPANY) 510 , HIMALAYA HOUSE, 79 , PALTON ROAD , MUMBAI : -400 001. " PENCIL SHARPENER " 13th February 2003

03-04

Class

No.191350. KHAITAN ( INDIA) LIMITED , AN INDIAN COMPANY OF 46C , JAWAHAR LAL NEHRU ROAD , KOLKATA: -700 071 , W.B. , INDIA . " CEILING FAN " 24th February 2003 .

4889 THE GAZETTE OF INDIA , NOVEMBER 29 , 2003 ( AGRAHAYANA 8, 1925)

PART III-SEC . 2 ]

09-01

Class

No.192240 . HINDUSTAN RIMMER, D- 9 , S.M.A. INDUSTRIAL AREA , G. T. KARNAL ROAD , DELHI : -110 033 , INDIA . " BOTTLE " 30th May 2003

07-02

Class

No.191656 . NILKAMAL CRATES AND BINS OF 77/78 NILKAMAL HOUSE , ROAD NO.13/ 14, Μ.Ι.- D.C. , ANDHERI EAST, MUMBAI: -400093 , MAHARASHTRA , INDIA, INDIAN PARTNERSHIP COMPANY. " LID" 27th March 2003

Class 09-03

NEAR No.191655 . NILKAMAL PLASTICS LTD . , OF SURVEY NO.-354/2 & 354/3, RAKHOLI BRIDGE , SILVASSA - KHANVEL ROAD, VILLAGE VASONA, SILVASSA( D & N.H. ) , ( U.T. ) , INDIA, INDIAN COMPANY. " ICE BOX" 27th march 2003

08-09

Class

No.191480 : M/ S . PUSHPA INDUSTRIES HAVING OFFICE AT S/2 , OPP . BHARAT NIWAN BEHIND SARAF KASKAR IND . ESTATE , OSHIWARA BRIDGE, JOGESHWARI (W), MUMBAI : -400 102 , MAHARASHTRA , INDIA , WINDOWS " 11th march 2003 . " FITTINGS FOR

Class 03-04 No.191221 . KHAITAN ( INDIA) LIMITED , AN INDIAN COMPANY OF 46C , JAWAHAR LAL NEHRU ROAD , KOLKATA: -700 071 , W.B. , INDIA . " CEILING FAN" 10th February 2003.

4890

THE GAZETTE OF INDIA , NOVEMBER 29 , 2003 ( AGRAHAYANA 8 , 1925) [PART III-SEC. 2 10-99

Class

No.191698 . MIJO AUTO GAS PVT. LTD . , AN INDIAN COMPANY, B-38-39 , SANJAY MARKET, MANGOLPUR KALAN , SECTOR - 2 , ROHINI , DELHI : - 110 085, ( 1NDIA) . " BODY OF VAPORIZER ( VACUUM ) 1 " April 2003

Class 19-99 No. 191277. HINDUSTAN PENCILS LTD. , ( AN INDIAN COMPANY) 510, HIMALAYA HOUSE, 79 , PALTON ROAD , MUMBAΑΙ : -400 001. " PENCIL SHARPENER " 13th February 2003

Class 09-01

No. 191139. HINDUSTAN RIMMER, D- 9 , S.M.A. INDUSTRIAL AREA , G. T. KARNAL ROAD , DELHI : -110 033 , INDIA . " BOTTLE " 30th May 2003

Class. 15-01 No.190378 . M/S . BHARAT ENGINEERING WORKS , ATLOK ROAD, GEETANAGAR, JASDAR- 360050 , DIST . - RAJKOT (GUJARAT- INDIA) . "POWER TRANSMISSION UNIT" , 8 NOVEMBER 2002.

Dr. S. N. MAITY

Controller General of Patents , Designs & Trade Marks प्रबन्धक , भारत सरकार मुद्रणालय , फरीदाबाद द्वारा मुद्रित एवं प्रकाशन नियंत्रक , दिल्ली द्वारा प्रकाशित , 2003

PRINTED BY THE MANAGER ,GOVERNMENT OF INDIA PRESS , FARIDABAD AND PUBLISHED BY THE CONTROLLER OF PUBLICATIONS , DELHI , 2003