REGISTERED No. DL(N ) -04/0007/2003-05 रजिस्ट्री सं. डीएल ( एन ) -04/0007/2003-05
भारत का राजपत्र The Gazette of India
साप्ताहिक/WEEKLY
प्राधिकार से प्रकाशित
PUBLISHED BY AUTHORITY
नई दिल्ली, जनवरी 24 जनवरी 30, 2004 ( माघ 4, 1925 )
सं० 4]
NEW DELHI, SATURDAY, JANUARY 24 - JANUARY 30, 2004 (MAGHA 4, 1925)
No. 4]
इस भाग में भिन्न पृष्ठ संख्या दी जाती है जिससे कि यह अलग संकलन के रूप में रखा जा सके । (Separate paging is given to this Part in order that it may be filed as a separate compilation)
भाग III-खण्ड 2
[PART III-SECTION 2 ]
[पेटेन्ट कार्यालय द्वारा जारी की गई पेटेन्टों और डिजाइनों से सम्बन्धित अधिसूचनाएं और नोटिस] [Notifications and Notices Issued by the Patent Office relating to Patents and Designs ] THE PATENT OFFICE
PATENTS AND DESIGNS
2. Patent Office Branch , W-5, West Patel Nagar , New Delhi- 110008 .
Kolkata, the 24th January 2004
ADDRESSES AND JURISDICTIONS OF THE OFFICES OF THE PATENTS OFFICE
The States of Haryana, Himachal Pradesh , Jammu and Kashmir , Punjab , Rajasthan , Uttar Pradesh and Delhi and the Union Territory of Chandigarh .
The Patent Office has its Head Office at Kolkata and Branch Offices at Mumbai , Delhi and Chennai having Territorial Jurisdiction on a Zonal basis as shown below:-
Telegraphic Address " PATENTOFIC" Phone Nos . (011 ) 2587 1255 , 2587 1256, 2587 1257, 2587 1258. Fax No. (011 ) 2587 1256. E-mail: [email protected]
1. Patent Office Branch , Todi Estates , IIIrd Floor, SunMill Compound, Lower Parel (West ) , Mumbai -400013 .
3. Patent Office Branch , GunaComplex , 6th Floor, Annex - II, 443 , Annasalai , Teynampet, Chennai -600018 .
The States of Gujarat, Maharashtra, Madhya Pradesh and Goa and the Union Territories of Daman and Diu & Dadra and Nagar Haveli .
The States of Andhra Pradesh ,
Telegraphic Address " PATOFFICE" Phone Nos . (022) 2492 4058 , 2496 1370, 2492 3684, 24903852
FaxNos .(022) 2495 0622, 2490 3852
Karnataka, Kerai Tamil Nadu and Pondicherry and the Union Territories of Laccadive, Minicoy and Aminidivi Islands .
E-mail: [email protected]
(221)
1-427GI/2003 222
THE GAZETTE OF INDIA , JANUARY 24, 2004 (MAGHA 4, 1925)
[PART III-SEC . 2 Telegraphic Address "PATENTOFFIC "
FaxNos . (033) 2247 3851 , 2240 1353.
Phone Nos .(044) 2431 4324/4325/4326 .
E-mail . patentin @ vsnl.com
Fax Nos . (044) 2431 4750/4751 .
patindia@ giascl01.vsnl.net.in
E-mail . patentchennai @vsnl . net
Website: http :/Ipindia.nic.in
4. Patent Office (Head Office), Nizam Palace, 2nd M.S.O. Building , 5h, 6th & 7th Floor , 234/4 , Acharya Jagadish Bose Road, Kolkata-700020 .
All applications, notices , statements or other documents orany fees required by the Patents Act, 1970 and the Patents (Amendment) Act, 2002 or by the Patents Rules, 2003willbe received only at the appropriate offices of the PatentOffice.
Restof India .
Telegraphic Address " PATENTS " Phone Nos .(033) 2247 4401/4402/4403 .
Fees: The fees may either be paid in cash or may be sent by Bank Draft or Cheques payable to the Controller of. Patents drawn on a scheduled Bank at the place where the appropriate office is situated.
पेटेंटकार्यालय एकस्व तथा अभिकल्प
3. पेटेंट कार्यालय शाखा, गुना कम्प्लेक्स, छठा तल, एनेक्स II, 443, अन्नासलाई , तेनामपेट, चेन्नई - 600 0181
कोलकाता, दिनांक 24 जनवरी 2004 पेटेंट कार्यालय के कार्यालयों के पते एवं क्षेत्राधिकार
पेटेंट कार्यालय का प्रधान कार्यालय कोलकाता में अवस्थित है तथा मुम्बई , दिल्ली एवं चेन्नई में इसके शाखा कार्यालय हैं , जिनके प्रादेशिक क्षेत्राधिकार जोन के आधार पर निम्न रूप में प्रदर्शित हैं: --
आन्ध्र प्रदेश , कर्नाटक, केरल, तमिलनाडु तथा पाण्डिचेरी राज्य क्षेत्र एवं संघ शासित क्षेत्र लक्षद्वीप , मिनिकाय तथा एमिनिदिवि द्वीप । तार पता " पेटेंटोफिक" फोन: (044) 2431 4324/4325/4326. फैक्स: (044) 2431 4750/4751 . ई. मेल: [email protected]
1. पेटेंट कार्यालय शाखा, टोडी इस्टेट, तीसरा तल, सनमिल कम्पाउंड, लोअर परेल ( वेस्ट) , मुम्बई - 400 013 ।
4. पेटेंटकार्यालय (प्रधान कार्यालय ) , निजाम पैलेस, द्वितीय बहुतलीय कार्यालय भवन, 5वां , 6ठ्ठा व 7वां तल, 234/4, आचार्य जगदीश बोस मार्ग, कोलकाता- 700 0201
गुजरात, महाराष्ट्र, मध्य प्रदेश तथा गोआ राज्य क्षेत्र एवं संघ शासित क्षेत्र , दमन तथा दीव एवं दादर और नगर हवेली ।
भारत का अवशेष क्षेत्र ।
तार पता : " पेटोफिल"
फोन: (022) 24924058, 2496 1370, 2492 3684, 2490 3852
तार पता -" पेटेंट्स "
फैक्स: ( 022 ) 2495 0622, 2490 3852
ई. मेल: [email protected]
फोन: (033 ) 2247 4401/4402/4403 . फैक्स: (033 ) 2247 3851 , 2240 1353. ई. मेल : [email protected]
2. पेटेंट कार्यालय शाखा,
डब्ल्यू-5 , वेस्ट पटेल नगर,
[email protected] वेब साइट : http./Ipindia.nic.in
नई दिल्ली 1100081
हरियाणा , हिमाचल प्रदेश , जम्मू तथा कश्मीर, पंजाब, राजस्थान, उत्तर प्रदेश तथा दिल्ली राज्य क्षेत्रों एवं संघ शासित क्षेत्र चंडीगढ़ ।
पेटेंट अधिनियम, 1970 तथा पेटेंट ( संशोधन ) अधिनियम , 2002 अथवा पेटेंट नियम, 2003 द्वारा अपेक्षित सभी आवेदन, सूचनाएं, विवरण या अन्य दस्तावेज या कोई फीस पेटेंट कार्यालय के केवल समुचित कार्यालय में ही ग्रहण किए जाएंगे ।
तार पता :" पेटेंटोफिक "
फोन: (011 ) 2587 1255 , 2587 1256 , 2587 1257 , 2587 1258 .
फैक्स: (011 ) 2587 1256 .
शुल्क : शुल्कों की अदायगी या तो नकद की जाएगी अथवा जहां उपयुक्त कार्यालय अवस्थित हैं, उस स्थान के अनुसूचित बैंक से नियंत्रक, पेटेंट को भुगतान योग्य बैंक ड्राफ्ट अथवा चैक द्वारा की जा सकती है ।
ई. मेल:[email protected] PART III-SBC . 2]
THE GAZETTE OF INDIA , JANUARY 24, 2004 (MAGHA 4, 1925) 223
Alteration of Date U/ S 16
Patent No. 191950 ( 197/MAS/01 ) Ante dated to 28th January, 1999.
Patent No. 191959 ( 816/MAS/2000 ) Ante dated to 11th September, 1994.
Patent No. 191969 ( 3034/MAS/97) Ante dated to 21st June, 1996.
Patent No. 191970 ( 82/ MAS/01 ) Ante dated to 31st March, 1995 .
अभिगृहित पूर्ण विनिर्देश
एतद्वारा सूचना दी जाती है कि आवेदनों में किसी पर पेटेंट अनुदान का विरोध करने वाले इच्छुक व्यक्ति राजपत्र के इस निर्गमन की तिथि से चार महीने के भीतर या उक्त चार महीने की समाप्ति के पूर्व, प्ररूप 4 में यदि आवेदित किया हुआ हो, तो परवर्ती एक महीने के भीतर, किसी समय, नियंत्रक, पेटेंट को ऐसे विरोध की सूचना प्ररूप 7 में उपयुक्त कार्यालय में दे सकते हैं । विरोध का लिखित कथन साक्ष्य के साथ, यदि कोई हो, दो प्रतियों में उक्त सूचना के साथ या अगले दो महीने की अवधि के भीतर दाखिल किया जाए । इस संदर्भ में , यथा संशोधित पेटेंट अधिनियम, 1970 की धारा 25 एवं पेटेंट नियम, 2003 के नियम 55 से 57 का अवलोकन किया जा सकता है । उपयुक्त कार्यालय द्वारा विनिर्देश एवं चित्र आरेख , यदि हो, के छायाप्रति की आपूर्ति छायाप्रति शुल्क के रूप में प्रति पृष्ठ रु. 4/- की अदायगी पर की जा सकती है ।
COMPLETE SPECIFICATION ACCEPTED
Notice is hereby given that any person interested in opposing the grant of a Patent on any of the Applications, may, at any time within four months from the date of this issue ofGazette or within further period of one month if applied for in Form 4 before the expiry of the said period of four months, give notice to the Controller of Patents at the Appropriate Office on Form 7 of such opposition. The Written Statement of Opposition accompanied by evidence, if any, should be filed in duplicate alongwith the said notice or within further period of two months . Section 25 of The Patents Act, 1970 as amended and Rules 55 to 57 of The Patents Rules , 2003 may be referred to in this regard.
Photo copies of the specification and drawings , if any, can be supplied by the Appropriate Office on payment of photocopying charges @ Rs . 4/- per page .
224
[PART III-SEC. 2 THE GAZETTE OF INDIA , JANUARY 24, 2004 (MAGHA 4 , 1925 )
203
Ind.Cl.:
191941 IntCI
B 32 B 3/28 ; 31/00 ; 35700 .
"AN APPARATUS AND A PROCESS FOR CONTINUOSLY PRODUCING A WEB FROM A THIN SHEET MATERIAL"
HAKLE -KIMBERLY DEUTSCHLAND GMBH
APPLICANT( S ) :
OF CARL - SPAETER - STRASSE 15-17 , D-56070 KOBLENZ , GERMANY ,
A GERMAN COMPANY.
INVENTOR( S) :
1. Dr MARIA RAIDEL ;
2. FRANZ ASCHENBRENNER;
3. JAN ULLMANN .
814/MAS/95
Filed on 03-Jul-95
Application No.
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES 2003 ) PATENT OFFICE , CHENNAI BRANCH .
52 CLAIMS
An apparatus for continuously producing a web ( 1 ) from a thin sheet material which is corrugated at least in partial sections thereof and elastic at least in transverse direction of the web. comprising a guide bed (2) which comprises a smooth surface portion for the material to pass over in contacting manner and which comprises grooves extending parallel or inclined to each other in the direction of movement of the material , wherein each groove , starting from a point positioned upstream with respect to the direction of movement of the material web towards an outlet end (4 ) of the guide bed (2) , is cut increasingly deeper into the surface of the guide bed (2 ) , and wherein the upper side of the guide bed (2) is formed substantially in the portion in which said grooves extend .
planarat
holding -down devices ( 5 ) located opposite to said grooves of the guide bed (20) so as to force said said holding -down assing between the surface of said guide bed (2) and (5 ) into the grooves of the guide bed (2) to obtain corrugations in the was and pressing means arranged at the outlet end (4) of said guide bed (2) which substantially prevents the formed corrugations from springing back to the original condition .
110
109
107
105
108
122
101
103
144
105
106
COMP.SPECN : 40 PAGES DRAWING : 9 SHEETS .
REFERENCE CITED : DE 201 1802 B2 ; 2945395 C2 ; 2827495 C2 ; 3611134 C2 .
225 THE GAZETTE OF INDIA, JANUARY 24, 2004 (MAGHA 4, 1925)
PART III-SEC . 2]
191942
195A
Ind . Cl .:
F 16K - 5/06
IntCI :
F 16L - 55/07
" A BALL VALVE WITH FULL OPENING AND AMETHOD FOR ITS MANUFACTURE "
NAVAL OY
APPLICANT( S ) :
A LIMITED COMPANY ORGANIZED
UNDER THE LAWS OF FINLAND
PL32, 23801 LAITILA,
FINLAND
1. EKLOF; HANNU .
INVENTOR(S) :
Filed on
2-Aug-95
989MAS 95
APPLICATION NO :
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES, 2003 ) PATENT OFFICE , CHENNAI BRANCH .
14 CLAIMS
Amethod of manufacturing a ball valve (3 ) with full openings between two tubes (1 , 2), said valve having a valve ball (5) , a sleeve - like casing (8) , and an axle (17), and said tubes having ends (6, 7), and sides, wherein said ends of said tubes are sealed against said valve ball (5), and said sleeve- like casing (8) is located around said valve ball and said ends (15) of said tubes and is fixed to said sides of said tubes to hold said valve together, said method comprising ; forming substantially stepped protrusions ( 12 , 22, 23 ) at said ends of said tubes adapted to accept an annular sealing ( 11 ) , bringing said ends of said tubes against opposite sides of said valve ball , reducing an inner diameter of ends of said sleeve- like casing ( 18, 8) lócated around said valve ball by applying pressure until said inner diameter of said ends of said sleeve- like casing approximately match an outer diameter of said tubes , and attaching said ends ( 15) of said sleeve- like casing ( 18) to said sides of said tubes inserted in said sleeve- like casing.
3
-17
16 PAGES DRAWING: 4 SHEETS.
COMP.SPECN :
13
1347
15
15.
11 12 9 10 16 8 12 11
Fig1 226
THE GAZETTE OF INDIA , JANUARY 24, 2004 (MAGHA 4, 1925)
[PART III-SEC . 2 Ind . Cl .:
32E
191943 intCl 4 :
C 08 F 297/02
"A PROCESS FOR PREPARING A STAR POLYMER " APPLICANT( S):
SHELL INTERNATIONALE RESEARCH
MAATSCHAPPIJ B V
OF CAREL VAN BYLANDT. LAAN 30
2596 HR THE HAGUE
THE NETHERLANDS A COMPANY ORGANIZED UNDER THE LAWS OF THE NETHERLANDS, A RESEARCH COMPANY.
INVENTOR( S) :
1. ROBERT BARNETT RHODES ;
2. DALE LEE HANDLIN ;
3. CRAIG ALDRED STEVENS.
APPLICATION NO :
1031 MAS 95
filed on 14-Aug-95 APPROPRIATE OFFICE FOROPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES, 2003 ) PATENT OFFICE, CHENNAI BRANCH.
11. CLAIMS
Aprocess for preparing a star polymer , useful as a viscosity index (VI) improver, which polymer comprises polyisoprene blocks and polybutadiene blocks combined in molecules having the structure ( EP -EB -EP' ) n -X, Wherein EP is an outer block of polyisoprene having a number average molecular weight (MW1) between 6,500 and 85,000 ; EB is a block of polybutadiene having a number average molecular weight (MW2) between 1,500 and 15,000 and having at least 85% 1,4- polymerisation; and EP ' is an inner block of polyisoprene having a number average molecular weight (MW3 ) between 1,500 and. 55,000, wherein the star polymer comprises less than 15% by weight of the butadiene , the ratio of MW1 /MW3 is from 0.75: 1 to 7.5 : 1 , X is a nucleus of a polyalkenyl coupling agent, and n is the number of block copolymer arms in the star polymer when coupled with 2 or more moles of the polyalkenyl coupling agent per mole of living block copolymer molecules , which process comprises anionically polymerising isoprene in the presence of sec-butyl - lithium , adding butadiene to the living polyisoprenyl lithium , adding isoprene to the polymerised living block copolymer, and then coupling the living block copolymer molecules with a polyalkenyl coupling agent to form the star polymer , and wherein the polyisoprene blocks and the polybutadiene blocks are at least partially hydrogenated.
COMP.SPECN : 33 PAGES DRAWING : NIL SHEETS .
227 THE GAZETTE OF INDIA, JANUARY 24, 2004 (MAGHA 4, 1925)
PART III-SEC . 2]
191944 Ind.Cl.:128G
Int.Cl:A 61 F 2/24
" A process for the preparation of Polyethylene glycol modified pericardium " .
Applicant: Shree Chitra Tirunal Institute for Medical Sciences & Technology , Biomedical Technology Wing , Satelmond Place, (An Indian Institute)
Trivandrum - 695012 .
1. CHANDRA PRAKASH SHARMA.
Inventors:
Application No199/MAS/2000 filed on 10-Mar- 2000
Appropriate office for Opposition Proceedings (Rule 4, Patents Rules , 2003) Patent Office, Chennai Branch.
6 Claims
A process for the preparation of polyethylene glycol modified pericardium which comprises in subjecting bovine pericardium to decellularisation by stepwise treatment with detergent and a proteinase inhibitor in a manner such as herein described to obtain decellularised pericardium,
Crosslinking the said deeellularised pericardium with reagents such as glutaraldehyde and /or hexamethylene diisocyanate , treating the said crosslinked bovine pericardium with a solution of polyethylene glycol in a buffer such as herein described, to obtain the polyethylene glycol modified pericardium .
Comp.Specn . 18 Pages; Drgs 4 Sheets .
228
[PART III-SEC. 2 THE GAZETTE OF INDIA , JANUARY 24, 2004 (MAGHA 4, 1925)
Ind.Cl .: 32F 3 ( C)
191945 Int.Cl:CO8B 37/10.
" A PROCESS FOR THE PREPARATION OF HEPARIN IMMOBILISED PERICARDIUM " .
Applicant: Shree Chitra Tirunal Institute For
Medical Science & Technology An Indian Institue of Biomedical Technology Wing , Poojappura, Thiruvanthapuram 695 012,kerala, India.
Inventors: 1. LEISTER TOWSEN MOSES;
2. CHANDRA PRAKASH SHARMA .
Application No335 /MAS/2000 filed on 1 - May-2000
Appropriate office for Opposition Proceedings (Rule 4, Patents Rules , 2003 ) , Patent Office , Chennai Branch.
15 Claims
A process for the preparation of heparin immobilized pericardium which comprises .
Subjecting bovine pericardium to decellularisation by treatment with detergent in a first step and second step , to obtain decellularised bovine pericardium ;
Crosslinking with glutaraldehyde for 5 to 24 hrs . followed by polyethylene glycol (PEG) grafting in a manner such as herein described to obtain the grafted pericardium and immobilization of heparin thereon .
Comp.Specn. 16 Pages ; Drgs3 Sheets .
229 THE GAZETTE OF INDIA , JANUARY 24 , 2004 (MAGHA 4, 1925)
PART III-SEC. 2 ]
191946 Ind.Cl.:32 F2 С.
Int.CI:C 07 F 9/30.
" A PROCESS FOR PRODUCING
ΑΝ ΑΜΙΝΟΡHOSPHONIC ACID " .
MONSANTO COMPANY;
Applicant:
a Delaware corporation,
USA of 800 N. Lindberg Boulevard , St Louis , MO 63167, U.S.A.
Inventors: 1. JOHNSON TODD J ;
2. MILLER WILLIAM H.
Application No340/MAS/2000 . filed on 02- May -2000.
Appropriate office for Opposition Proceedings (Rule 4, Patents Rules, 2003) Patent Office , Chennai Branch.
16. Claims
The process for producing an aminophosphonic acid ofthe formula
H H HO- P- (CH2) n - N - R 유 1 HO
Wherein n is 1 to about 3 and R is hydrogen , an alkyl group Containing 1 to 6 carbon atoms , an aryl group containing 6 to 12 carbon atoms , carboxylate salt or ester, or hydroxyethyl , the said process comprising reacting in an aqueous medium an aminophosphonate ester as herein described with a base selected from the group consisting of alkali metal hydroxide , alkaline , earth metal hydroxide and tertiary amines In the presence of a hydrolysis facilitator selected from the group consisting of CO2 CS2 and COS , the reaction being carried out at a temperature between 75°c to 120°C, pressure of up to 500 psig, and pH from 5 to 14, and optionally recovering the aminophosphonic acid ma known manner .
Keference to: US 5,041,628 .
Comp.Specn. 15. Pages ; Drgs Nil. Sheets .
2-427GI/2003 230
THE GAZETTE OF INDIA , JANUARY 24, 2004 (MAGHA 4, 1925)
[PART III-Sac. 2 Ind.Cl.:
32F2B
191947 IntCI :
C07D239/10
"APROCESS FOR THE PREPARATION OF VINYL PYRIMIDINE DERIVATIVES"
APPLICANT( S):
F HOFFMANN -LA ROCHEAG
OF 124GRENZACHERSTRASSE
CH-4070 BASLE, SWITZERLAND
A SWISS COMPANY
INVENTOR( S) :
1. KURT PUNTENER
2.MICHELANGELO SCALONE
392MAS 2000
ApplicationNo.
fited on 23-May-00
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4 , PATENTS RULES 2003 ) PATENT OFFICE, CHENNAI BRANCH .
16 CI AIMS
1. Aprocess for the preparation of vinyl -pyrimidine derivatives of the formula I
NHR
R
wherein R' is hydrogen or a carboxylic ester group such as herein described, and R² is hydrogen or a group of the formula( a)
HC
(a)
RO OR
wherein R is hydrogen, a protecting group or a group easily hydrolyzable under physiological conditions , the said process comprises reacting a compound of the formula II
NHR'
R³
(11)
R21
wherein R²¹ is hydrogen or a group of the formula (a) wherein hydroxy groups are optionally protected, R³ is bromo , chloro or iodo, and R¹ is as defined above , with a vinyl borane compound of the formula IIIa or IIIb
)CH2 =CH ) B(R ( م
(Ша)
[ (CH2 =CH ), B(R )
(ШЬ) 231 PART III-SBC.2]
THE GAZETTE OF INDIA, JANUARY 24, 2004 (MAGHA 4, 1925)
wherein
n is1,2 or3;
m is 0 or 1;
R' is hydrogen, halogen, alkyl , cycloalkyl, alkoxy, cycloalkoxy, hydroxy or aryl, and wherein, if more than one group Re is present, these groups may be different from each other , or two groups R' may, together with-A- (CH2) -Y-( CH2 )-A- , form a carbocyclic or heterocyclic ringwherein A and Y are CH , or NH or O and q and r are an integer from 0-4, or two groups R6 may also form a catecholmoiety
inwhich R is hydrogen or lower alkyl such as herein described;
Lis an amine, a Schiff base or an ether,
P is 1 , 2, 3 or 4;
X* is a cation;
in the presence of a Pd complex such as herein described and a base, and optionally, further reacting a product of formula I wherein R² is hydrogen with a compound of formula IV
H
(IV)
ROO OR
wherein Rb is a hydroxy protecting group and Z is a leaving group, in the presence of the Lewis acid catalyst, and, if desired, removing any protecting group from a compound of formula I'wherein R² is a group of the formula ( a).
COMP.SPECN.:19 PAGES DRAWINGS : NIL SHEES
REFERENCE : PCT/ EP99/00710, EP104375 232
THE GAZETTE OF INDIA , JANUARY 24, 2004 (MAGHA 4, 1925 )
[PART III-SBC. 2 Ind.Cl.:83 A 1 .
191948
Int.Cl:A 23 C 15/16 ; & A 23 L 1/42
" A PROCESS FOR PRODUCING REDUCED FAT AND REDUCED CALORIE NUT BUTTER COMPOSITION "
Applicant: Bestfoods , a U.S.corporation organised under the laws of the State of Delaware , U.S.A. of International Plaza, 700 Sylvan Avenue, Englewood Cliffs , New Jersey 07632 U.S.A.
Inventors: 1. BERNARD C.SEKULA ;
2. JACENTY W. GOLEBIOWSKI .
1064/MAS/2000 . filed on 8 -Dec-2000.
Application No
Convention No. 09/466,471 . on 17 -Dec-99 . , U.S.A.
Appropriate office for Opposition Proceedings (Rule 4, Patents Rules , 2003)
Patent Office , Chennai Branch .
2 Claims
A process for producing reduced fat and reduced calorie nut butter composition comprising preparing a slurry comprising milled, roasted, full or partially defatted fat nuts and, optionally milling said slurry ; heating said slurry under agitation to a termperature of at least 160 ° F white admixing said slurry with an EPG having an IV less than or equal to 10 and a FACN : PO ratio of between 7 and 15 to obtain an admixture; deaerating and cooling the admixture to obtain the reduced calorie nut butter composition.
Reference to : US 5,268,192
US 5,258,197 .
Comp.Specn. 31 Pages ; Drgs Nil . Sheets .
233 THE GAZETTE OF INDIA, JANUARY 24, 2004 (MAGHA 4, 1925)
PART III-SBC. 2].
191949
32F1 & 32 F2 b
Ind, Cl.:
C07 D 200/02
IntCl :
"AN IMPROVED PROCESS FOR THE PREPARATION OFCIS ENDO BENZYL - 2- AZABICYCLO[ 3.3.0JOCTANE
3-CARBOXYLATE HYDROCHLORIDE
APPLICANT(S) :
Dr.REDDY'S LABORATORIES LIMITED AN INDIAN COMPANY HAVING ITS REGISTERED OFFICE AT 7-1-27, AMEERPET HYDERABAD - 500 016. , INDIA
1. MANNE SATYANARAYANA REDDY;
INVENTOR(S):
2.MUPPA KISHOREKUMAR;
3.KARAMALA RAMASUBBARELDDY;
4. KIKKURU SRIRAMI REDDY:
5.UPPALA VENKATA BHASKARA RAQ .
348 MAS 01 FILED ON
30-Apr-01 INDIA
APPLICATION NO :
APPROPRIATEOFFICE FOR OPPOSITION PROCEEDINGS (RULE4, PATENTS RULES , 2003) PATENT OFFICE , CHENNAI BRANCH:
5CLAIMS
1. An improved process for the preparation of cis endo benzyl -2-azabicyclo [3.3.0]
octane- 3-carboxylate hydrochloride of formula (4), which comprises;
COOCH2-Ph
HCI
Formula(2)
OH
48742005-
Forrauin (3 )
HH
COOCH2-Ph
HCI
H
Formula(4)
a. treatment of a suspension of racemic benzyl -2-azabicyclo [ 3.3.0] octane- 3-carboxylate hydrochloride of formula (2) in halogenated solvent selected from dichloromethane, ethylene dichloride or chloroform or in an organic solvent selected from alkyl acetates wherein alkyl group consists of C1 -Cs carbon atoms preferably ethyl acetate, with a solution of alkali hydroxide selected from potassium hydroxide or sodium hydroxide or a alkali carbonate selected from potassium carbonate or sodium carbonate preferably sodium carbonate, till a clear solution is obtained;
b. separating the organic phase from the resultant biphasic system , accompaniedby distillation of solvent;
c. dissolving the residue obtained in step b) in ketone solvent selected from C3 to C , ketones , such as acetone , propanone, 2-methylbutyl ketone, acetyl acetone, ethyl methyl ketone, diethyl ketone , diisopropyl ketone, diisobutyl ketone and the like or 234
THE GAZETTE OF INDIA , JANUARY 24, 2004 (MAGHA 4, 1925)
[PART III-SEC. 2 aliphatic nitriles selected acetonitrile and the like , preferably acetone followed by addition ofL(+) Mandelic acid;
d. stirring the reaction mixture at a temperature of 0-30° C preferably 0- 10°C for a time period of 15 minutes to 2 hours preferably 20-30 minutes ;
e. isolation of S, S , S diastereomeric salt of benzyl -2- azabicyclo [ 3.3.0] octane - 3 -carboxylate mandalate salt of formula (3) obtained in step d ) by conventional methods;
f. treatment of a suspension of S , S , S diastereomeric salt of benzyl -2- azabicyclo [ 3.3.0 ] octane - 3 -carboxylate mandalate salt of formula (3 ) in halogenated solvent selected from dichloromethane , ethylene dichloride or chloroform or in an organic solvent selected from alkyl acetates wherein alkyl group consists of C1 -Cs carbon atoms preferably ethyl acetate , with alkali hydroxide selected from sodium hydroxide or potassium hydroxide or alkali carbonate selected from potassium carbonate or sodium carbonate preferably sodium carbonate till a clear solution is obtained;
g. separating the organic phase from the resultant biphasic system , accompanied by distillation of solvent ;
h. dissolving the residue obtained in step g) in ketone solvent selected from C3 to C11 ketones , such as acetone , propanone , 2-methylbutyl ketone , acetyl acetone , ethyl methyl ketone , diethyl ketone , diisopropyl ketone, diisobutyl ketone and the like or aliphatic nitriles selected from acetonitrile and the like, preferably acetone followed by drop wise addition of hydrochloric acid at a temperature of 0-30 °C preferably 0-10 °C , till pH- 1.5-2.5 preferably 2.0;
i. filtering the suspension obtained in step c) by conventional methods to obtain the title compound of formula (4) .
COMP. SPECN .: 11 PAGES DRAWINGS : NIL SHEETS
REFERENCE CITED : EP0115345 ΒΙ .
235 PART III SBC. 2 ]
THE GAZETTE OF INDIA, JANUARY 24, 2004 (MAGHA 4, 1925)
191950
32F 2(a)
Ind. Cl.:
C07 B 55/00
IntCI :
"AMETHOD FOR PRODUCING AN OPTICALLY ACTIVE.CHRYSANTHEMIC ACID"
SUMITOMO CHEMICAL COMPANY
APPLICANT(S):
LIMITED. , OF 5-33 KITAHAMA 4 CHOME, CHUO- KU , OSAKA 541 8550, JAPAN; A JAPANESE COMPANY.
1. MAKOTO ITAGAKI
INVENTOR( S):
2. GOHFU SUZUKAMO;
3. KAZUAKI SASAKI :
4: KUNIHIKO FUJITA
5-Mar-01
197 MAS 01 Filed on
APPLICATION NO :
Divisional to Patent Application No: 105/MAS/99
Ante-datedto 28th Jan , 1999
APPROPRIATE OFFICE FOR OBPOSITION PROCEEDINGS (RULE 4, PATENTS RULES, 2003 ) PATENT OFFICE, CHENNAI BRANCH.
4 CLAIMS
A method for producing an optically active chrysanthemic acid with improved trans isomer ratio and optical purity, the said method comprises the steps of reacting chrysanthemic acid having a trans isomer ratio of not less than 50% and an optical purity ofnot less than 10% e.e with an optically active amine ofthe formula (A-2)
NRIR2
CHR3
(A-2)
wherein R₁ and R₂ respectively represent a hydrogen atom , an alkyl group , an aralkyl group or an aryl group ,
R3 represents an alkyl group having 1 to 6 carbon atoms; and an asymmetric carbon atom represented by " * " is either in S-configuration or R- configuration wherein the amount ofthe optically active amine is from 0.2 to 1.2 moles per mole of the chrysanthemic acid and to optically resolve said chrysanthemic acid and recovering the said optically active chrysanthemic acid in a known manner.
DRAWING: NIL SHEETS.
COMP. SPECN : 32 PAGES 236
THE GAZETTE OF INDIA, JANUARY 24, 2004 (MAGHA 4, 1925)
[PART III-SEC. 2 Ind.Cl.:
191951
52A, 172 C 5
IntCI :
C 03 B 37/16
D01G 1/04
"AN APPARATUS FOR FEEDING ONE OR MORE FIBRE THREADS" APPLICANT(S):
AP:' LICATOR SYSTEM AB
A SWEDISH COMPANY OF
METALLVAGEN 6, S-435
33, MOLNLYCKE
SWEDEN
INVENTOR( S) :
1. KJELL SAND
911/MAS/95
ApplicationNo.
filedon 18-Jul-95
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES. 2003) PATENT OFFICE , CHENNAI BRANCH .
4 CLAIMS
An apparatus for feeding one or more fibre threads, e.g. of glass, at an adjustable feeding rate, comprising at least two synchronously driven feed rollers ( 11,12) forming at least one nip for the fibre thread ( 10) and consisting of a first motor driven roller ( 11 ) and a second co- rotating roller ( 12), characterized in that at least one of the motor driver roller ( 11 ) and the co-rotating (12) is provided with at least one O - ring (22) of an elastic incompressible material , e.g. rubber , each one being housed in its respective peripheral slot (21 ) in the cylindrical mantle surface of the roller, which O-ring bears on the peripheral surface of the adjacent roller ( 12) to transmit the rotary motion by means of friction .
10
FIG . 1
12
17
19-
14
15
20
-16
COMP. SPECN .: 8 PAGES DRAWINGS : 1 SHEET . REFERENCE CITED : 913/MAS/95 .
237 THE GAZETTE OF INDIA , JANUARY 24 , 2004 (MAGHA 4, 1925 )
PART III-SEC . 2 ]
191952
Ind.Cl
C( 11) 123
26/02
Int.Cl :
" A PROCESS AND A PLANT FOR UREA PRODUCTION " .
Applicant: UREA CASALE S.A. VIA SORENGO 7,
CH -6900 LUGANO - BESSO A SWISS COMPANY.SWITZERLAND
2. UMBER TO ZARDI
1. GIORGIO PAGANI
Inventors:
Application No981 /MAS /95 filed on 1 -Aug-95
Complete specification Left 5 -Jul -96
Appropriate office for Opposition Proceedings (Rule 4, Patents Rules , 2003 ) Patent Office , Chennai Branch .
12Claims
Process for urea production comprising the steps of:
(1 ) performing a reaction between ammonia and carbon dioxide in a reaction space to obtain a reaction mixture comprising urea , corbamate and free ammonia in aqueous solution;
(2) subjecting said mixture to a treatment of partial decomposition of the carbomate and partial separation of said free ammonia in aqueous solution to obtain a flow comprising ammonia and carbon dioxide in vapour phase and a flow comprising urea and residual carbamate in aqueous solution;
(3) subjecting said first flow comprising ammonia and carbon dioxide in vapour phase to at least partial condensation to obtain a first portion of carbamate in aqueous solution ;
(4) recycling said first portion of carbamate to said reaction space;
(5) feeding said flow comprising urea and residual carbamate in aqueous solution to a urea recovery section;
(6) separating in said recovery section said residual carbamate from the urea to obtain a second portion of carbamate in aqueous solution;
(7) subjecting at least part of said second portion of carbomate in aqueous solution obtained in said recovery section to a treatment of partial decomposition to obtain a second flow comprising ammonia and carbon dioxide in vapour phase and a flow comprising residual carbamate in aqueous solution;
(8) Subjecting said second flow comprising ammonia and carbon dioxide in vapour phase to at least partial condensation to obtain a third portion of carbamate in aqueous solusion ;
(9) recycling said third portion of carbamate to said reaction space and recovering urea from the urea recovery section in a known manner.
Reference to: E -Α-0-479103
Ref: Indian Application No.981 /MAS/95
(Prov .Specn.: 12 , Comp.Specn.29 Pages ; Drgs 3 Sheets .
3-427GI/2003 238
THE GAZETTE OF INDIA, JANUARY 24, 2004 (MAGHA 4, 1925)
[PART III-SBC, 2 Ind. Cl .:
24F
191953 IntCI :
B60T -17/00
"ELECTRONICALLY CONTROLLABLE BRAKE BOOSTER WITH A CABLE FEED- THROUGH"
APPLICANT( S) :
LUCAS INDUSTRIES PUBLIC LIMITED COMPANY, A BRITISH COMPANY OF BRUETON HOUSE, NEW ROAD, SOLIHULL , WEST MIDLALNDS, B 91 3TX , GREAT BRITAIN .
1. PETER SCHLUTER.
INVENTOR( S) :
APPLICATION NO :
Filed on
1138MAS 95
4-Sep-95
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES , 2003 ) PATENT OFFICE, CHENNAI BRANCH.
16CLAIMS
"An electronically controllable brake booster with a cable feed through comprising:
-a first pneumatic working chamber ( 11 ) and a second pneumatic working chamber ( 12) which are separated by a movable wall( 13) .
-a cable feed - through (26) penetrating the movable wall ( 13 ) for atleast one electric cable (A, B) with a portion (27) of the cable feed- through (26) penetrating the movable wall (13) and -a holder (29) being in contact with the portion (27 ) and limiting the movability of the cable feed-through (26) at least in its longtitudinal direction, and -a seal (22) surrounding the cable feed- through (26 ) in the area ofthe movable wali ( 13 ) , the seal (22) tightly surrounding the portion (27) penetrating the movable wall , the seal (22) including a bead ( 23 ) which atleast partially surrounds the holder (29 )" .
36
433334 35
45
COMP.SPECN : 15 PAGES DRAWING: 3 SHEETS .
PART III-SBC.2]
239
THE GAZETTE OF INDIA, JANUARY 24, 2004 (MAGHA 4, 1925)
191954
Ind. Cl.:
85J; 104 J
F23G -5/00
IntCl
F23G- 7 /12
"A PROCESS FOR PRODUCING A SLAG MATERIAL"
AUSMELT LIMITED
APPLICANT( S):
OF 12KITCHEN ROAD , DANDENONG , VICTORIA 3175 , AUSTRALIA AN AUSTRALIAN COMPANY
INVENTOR(S):
1. JOHN MILLICE FLOYD; 2.BRIAN WILLIAM LIGHTFOOT .
05-Oct-95
filedon
APPLICATION NO:
1282MAS95
US
ON: 05-Oct-94
CONVENTION NO :
08/318,097
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4 , PATENTS RULES , 2003 ) PATENT OFFICE , CHENNAI BRANCH.
23 CLAIMS
Aprocess for producing a slag material by the disposal of waste materials, including municipal waste such as garbage , industrial wastes, waste materials including rubber and plastics based materials, and ash waste from municipal waste incinerators and toxic waste incinerators , wherein the waste is charged to a reactor, of a top -submerged lancing injector reaction system, containing a molten slag bath; and the molten bath is maintained in turbulent condition, during charging of the waste , by top- submerged injection therein of a free-oxygen containing gas , using at least one top- submerged lance of the system, such that the waste is taken into the molten bath and is caused to circulate therein to a combustion/oxidation zone generated by the top-submerged injection, whereby constituents ofthe waste are subjected to free - oxygen of the injected gas in said zone and to heat energy of the slag and thereby combusted and/or oxidised and whereby there is produced the slag material containing ash produced by combustion and/or oxidation of the waste material and at least a proporation of any heavy metals of the waste which do not discharge with process off-gases. 1/2
48
-140
-72
-24
-64
-44
-12
20
51-
42
400-
FG.1.:
220-
-23
360 .
34-
22
56
40-
38
COMP.SPECN: 34 PAGES ; DRAWING : 2 SHEETS .
240
THE GAZETTE OF INDIA, JANUARY 24, 2004 ( MAGHA 4, 1925 )
[PART III-SEC. 2 .
F 16L-25/00
Ind . Cl .
191955
Int C!:
150 A
"A THREAD JOINT OF A SURFACE -SEALING TYPE "
SUMITOMO METAL INDUSTRIES LIMITED
APPLICANT(S):
OF 5-33 , KITAHAMA 4 - CHOME, CHUO-
KU , OSAKA 541-8550 JAPAN,
A JAPANESE COMPANY &
VALLOUREC MANNESMANN OIL & GAS FANCE , OF 54 RUE ANATOLE FRANCE ,. 59620 AULNOYE - AYMERIES , FRANCE A FRENCH COMPANY
1. SHIGEO NAGASAKU ;
INVENTOR(S):
2. KENICHI OHYABU ;
3. JUN MAEDA;
4. AKIRA NARITA .
APPLICATION NO :
17-Oct-95
1339MAS 95 Filed On
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4, PATENTS RULES, 2003 ) PATENT OFFICE, CHENNAI BRANCH.
CLAIMS
A thread joint of a surface -sealing type used for connecting tubes, comprising a pin portion ( 10) on the tube having a male thread ( 11 ) formed in a tapering configuration with respect to an axis of a tube , a sealing portion ( 12 ) formed in a tapering configuration at a tip of the male thread ( 11 ) and a shoulder portion ( 13 ) formed af a tip of the sealing portion ( 12) , and a box portion (20 ) having a female thread (21 ) formed in a tapering configuration with respect to an axis of a tube , a sealing portion (22) formed in a tapering configuration in a back part of the female thread (21 ) and a shoulder portion (23) formed ink part of the sealing portion (22 ) , a circumsferential groove (28) between the fensale thread (21 ) and the sealing portion (22) of the box portion (20), the said circumferential groove (28) having a width of 1.5 to 2 pitches measured in thread pitches, a seal guiding portion (25 ) is formed between the female thread (21 ) and sealing portion (22) of the bor portion ( 2 ) inclination of which is larger than that of the sealing portion (22) , the sealing por 2 ) is shorter than the sealing portion (12), and a curve (26) which is tangent to the seaing portion (22) of the box portion (20) and connects the seal guiding portion (25 ) and the sealing portion (22) , contacts the sealing portion (12) of the pin-portion ( 10 ) with a distance of [ .45mm or larger the said pin portion ( 10) and the box portion (20) are screwed in into each other and bound so that sealing portions ( 12 , 22) come into contact with each other and shoulder portions ( 13 , 23 ) are abut each other , wherein the spiral sliding of the sealing portions of the thread joint, are constructed with a sliding distance (Ls ) defined as a quantity of spiral sliding of the sealing portions (12 , 22) relative to each other from the start of a contact between the sealing portions ( 12 , 22) in . a circumferential direction until the shoulder portions ( 13,23 ) abut each other is less than or equal to .0093 times the square of the outer diameter of the tube subtracted from 4.73 times the diameter of the outer tube.
28
2-4mm
W
21
COMP.SPECN : 46 PAGES DRAWING : 11 SHEETS .
22
12 RP
12
T
23
13
LP
MOS
10
DBDA
Der
Dex 241 PART III-SEC . 2]
THE GAZETTE OF INDIA , JANUARY 24, 2004 ( MAGHA 4, 1925)
191956
151-B
Ind . Cl .:
F 28G -15/04
IntCI :
"A SOOT BLOWER UNIT "
BERGEMANN GMBH
APPLICANT( S) :
SCHILLWISE 20 ,
46485 WESEL GERMANY, A GERMAN COMPANY.
1. RICHARD ZACHAY;
INVENTOR( S) :
2. KARL ALBERS .
filedon 3-Nov-95
1430 MAS 95
APPLICATION NO :
GB
ON
9519238.1
20-Sep-95
CONVENTION NO :
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES, 2003 ) PATENT OFFICE, CHENNAI BRANCH .
5 CLAIMS
A soot blower unit with an axially movable soot blower for cleaning heating surfaces of a heat exchanger ( 1 ) comprising: a lance tube (4) , a lance tube guide ( 15) , a travel carrier (11) with a track rail (9 ); said travel carrier ( 11 ) being secured to a wall (2) of said heat exchanger ( 1 ) ; and a blower carriage (7) connected to a rear end of said lance tube (4) and being movable on said track rail (9) ; said lance tube (4) being driven from a rest position by said blower carriage (7) axially into said heat exchanger ( 1 ); said lance tube (4) having a front end guided into said lance tube guide ( 15) ; said track rail (9) of said travel carrier ( 11 ) being vertically spaced by a first spacing (h₁) from a front end of said lance tube (4) in said rest position of said lance tube (4), said track rail (9) of said travel carrier ( 11 ) being vertically spaced by a second spacing (h2) from a rear end of said lance tube (4) held by said blower carriage (7) , said first spacing (h₁) being less than said second spacing (h2 ) .
10
Fig.2
SHEET .
DRAWING : 4
PAGES
COMP.SPECN: 13 242
[PART III-SEC. 2 THE GAZETTE OF INDIA , JANUARY 24 , 2004 ( MAGHA 4, 1925)
Ind . Cl .:
191957
128A
IntCi
A 61 F 13/00
A61 F 13/18
"AN ABSORBENT ARTICLE "
KIMBERLY - CLARK WORLDWIDE
APPLICANT( S ) :
INCORPORATED OF 401 N. LAKE STREET, NEENAH , WISCONSIN 54956 , AN US COMPANY
1. THOMAS PATRICK JORGENSON;
INVENTOR( S ) :
2. LORI SUE SCHUTKOSKE;
APPLICATION NO :
1697 MAS 95 Filed On
20-Dec-95
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES , 2003 ) PATENT OFFICE , CHENNAI BRANCH .
19 CLAIMS
An absorbent article ( 10 ; 100 ; 200) comprising an absorbent ( 11 ; 102 ;208 ) having a bodyfacing surface ( 12 ; 104) ; a liquid- impermeable baffle ( 14 ; 108 ; 206) ; and longitudinal side . edges ( 16,16 ; 110,112; 214,216) characterized in that said longitudinal side edges ( 16,16; 110,112; 214,216) are spirally wound inwardly to form integral longitudinal side barriers ( 18,18 ; 114,116,220,2205 .
Z
12.2
120
107 102 104 126 107、
116
-124
-114
106
-118
108
Z
FIG.6
COMP.SPECN : 21 PAGES DRAWING : 3 SHEETS .
PART III-SEC . 2]
243 THE GAZETTE OF INDIA , JANUARY 24, 2004 (MAGHA 4, 1925 )
Ind.Cl.:32 F2 B
191958
Int.Cl:C 07 D257/04, CO7D 235/02 & 235/06
"Animproved process for preparation of of Form-A of
2- n-butyl - 3 - [ [ 2' - ( 1H - tetrazol - 5 -yl) [ 1,1' - biphenyl] -4-yl ] methyl ] -1 ,
3 -diazaspiro [ 4.4] non - 1 - en -4- one (Irbesartan) "
DR.REDDY'SLABORATORIES LTD
Applicant:
an Indian company having its registered office at 7-1-27 , AMEERPET HYDERABAD -500 016 , A.P . , INDIA
Inventors: 1. VIJAY C.SONI ,
2. SUDHAKAR SUNKARI .
مون
Application No809/ MAS/ 2000 filed on 28 -Sep - 2000
Appropriate office for Opposition Proceedings ( Rule 4, Patents Rules , 2003) Patent Office , Chennai Branch .
6 Claims
An improved process for preparation of Form -A of 2-n -butyl - 3 - [ [ 2 ' - ( 1H - tetrazol-5- yl )biphenyl- 4 -yl ] methyl ] -1,3 - diazaspiro [4.4] non - 1 -en -4- one ( Irbesartan), which comprises:
A) dissolving crude or Form- B of Irbesartan in ketone solvent selected from methyl ethyl ketone, methyl propyl ketone, or methyl isobutyl ketone under heating till a clear solution is obtained ;
B) optionally subjecting the clear solution of step a) to carbon treatment ;
C) cooling the solution of step a) or b) at -10 to +25° с ;
D) isolating the crystalline Form -A of Irbesartan by conventional methods .
Reference to : EP 708,103
Comp.Specn. 11 Pages ; Drgs 2 Sheets .
[PART III-SEC . 2 244
THE GAZETTE OF INDIA , JANUARY 24 , 2004 ( MAGHA 4 , 1925)
191959
206 E
Ind . Cl .:
H 04 Q 7/30
IntCI4 :
"A CELLULAR TELEPHONE SYSTEM "
QUALCOMM INCORPORATED
APPLICANT( S):
STATE OF INCORPORATION - DELAWARE
6455 LUSK BOULEVARD
SAN DIEGO CALIFORNIA 92121
USA
1. KLEIN S GILHOUSEN;
INVENTOR ( S ) :
2. ROBERT PADOVANI ;
3. LINDSAY A WEAVER JR.
Filed on 28-Sep-00
816 MAS 00
APPLICATION NO :
Divisional to Patent Application No: 984/MAS/94
Ante-dated to th: Sep, 1994.
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES , 2003 ) PATENT OFFICE , CHENNAI BRANCH .
4 CLAIMS
A cellular telephone system comprising ; a mobile unit for generating a reverse link signal and receiving a forward link signal ; a first set of mobile units for generating a first set of other reverse link signals; a second set of mobile units for generating a second set of other reverse link signals , a first base station transceiver system having a first radio frequency signal processing system for receiving a first instance of said reverse link signal along with said first set of other reverse link signals ; a second radio frequency processing system for receiving a second instance of said reverse link signal along with said second set of other reverse link signals , and a signal processing system for combining said first and second instances to generate a first digit signal ; a second base station transceiver system for receiving a third instance of said reverse link signal and for generating a second digital signal in response ; a base station controller system for selecting between said first digital signal and said second digital signal into a third digital signal .
PAGES DRAWING: 4 SHEETS .
COMP.SPECN : 21
REFERENCE CITED : US 5267261 .
Co pending Application No : 810 MAS 00 ; 817 MAS 00 .
PART I -SEC. 21
245 THE GAZETTE OF INDIA , JANUARY 24, 2004 ( MAGHA 4, 1925 )
191960
Ind. Cl . :32 F2 A.
Int.Cl³ : CO 7C 87/02
" AN IMPROVED PROCESS FOR THE PREPARATION OF VENLAFAXINE HYDROCHLORIDE " .
DR.REDDY'SLABORATORIES LTD
Applicant:
an Indian company having its registered office at
7-1-27 , AMEERPET
HYDERABAD- 500 016 , A.P. ,
INDIA .
Inventors: 1. BUCHI REDDY REGURI ;
2. ΚΑΘΑΒΟΙNA RAJASEKHAR;
3. THATIPALLI POORNA CHANDER.
Application No222 /MAS /2001 filed on 13 -Mar- 2001
Appropriate office for Opposition Proceedings (Rule 4, Pater Rules, 2002 ) , Patent Office. Chennai Branch .
10 Claims
An improved process for the preparation Venlafaxine Hydrochloride of formula ( 1 ) , which comprises;
CH2NH2
CH CH2N-CH
CH2N-CH
Forum(4)
Formula(3)
Furnila(1)
a. reduction of 1- [ cyano- (p- methoxy phenyl ) methyl ] cyclohexanol of formula (2) using palladium on carbon in organic acid to yield compound of formula ( 3 ) as herein described;
b. treatment of 1- [ 2 - amino - 1 (p - methoxy phenyl ) ethyl ] cyclohexanol of formula (3 ) with a mixture of formaldehyde , formic acid and water accompanied by basification, extraction , optional isolation of free base and subsequent acidification to obtain the desired compound of formula ( 1 ) such as herein described .
Reference to : EP 0112669 .
Agent: Nil .
Sheets .
Nil .
. 16 Pages ; Drgs
Comp.Specn
4-427 GI/2003 246
PART III-SEC . 2 THE GAZETTE OF INDIA, JANUARY 24, 2004 ( MAGHA 4 , 1925 )
Ind.Cl.:
205G
191961 IntCI :
B 60 C 5/00
"A DEVICE FOR EXECUTING MULTIDIRECTIONAL MOVEMENT "
KASI RADHAKRISHNAN DURGA PRASAD
APPLICANT( S):
174 , DEFENCE OFFICERS' COLONY, CHENNAI - 600 097 , TAMIL NADU INDIA , INDIAN NATIONAL
INVENTOR( S) :
1. KASI RADHAKRISHNAN DURGA PRASAD
1246MAS 94
filed on 14-Dec-94
Application No.
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES 2003) PATENT OFFICE , CHENNAI BRANCH .
12CLAIMS
A device for executing multidirectional movement comprising a flexible tube , one end of which is anchored to the ground or to a movable platform , with other end of the tube free , the outer periphery of the tube being provided with flexible capsules at predetermined points , each capsule housing an inflatable member; and means for the controlled inflation of the members , whereby inflation of one or more selected members urges them against the said outer periphery of the tube. to flex the said tube in corresponding directions and thus execute multidirectional movement thereof.
COMP. SPECN .: 12 PAGES DRAWINGS : 2 SHEETS .
247 PE: III-SC 2]
THE GAZETTE OF INDIA , JANUARY 24 , 2004 ( MAGHA 4 , 1925 )
127 1
Ind.CI:
191962
F16D 3/00
Int
"A FRICTION TORQUE DEVICE "
EATON CORPORATION
APPLICANT( S):
EATON CENTER
1111 SUPERIOR AVENUE CLEVELAND, OHIO 44114 USA, A US COMPANY.
1. DANIEL V GOCHENOUR
INVENTOR( S)
2. BARRY TADAMS
3. MARTIN E KUMER
4.CHRISTOPHER M DAVIS
5. STEVEN D LEPARD
6. MICHAEL L BASSETT
7. KEVIN F SCHLOSSER
filed on
619MAS 95
Application No.
24-May-95
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES, 2003 ) PATENT OFFICE , CHENNAI BRANCH.
6 CLAIMS
Afriction torque comprising:
a driving member;
a cover coupled to said driving member for rotation with said driving member,
a pressure plate coupled to said cover for rotation with said cover;
anaxially extending driven shaft;
a driven member coupled to said driven shaft for rotation with said driven shaft, said driven member interposed between said driving member and said pressure plate;
a friction surface associated with said driven member, said friction surface engaging said driving member for transmitting torque from said driving member to said driven member,
a release assembly extending about said driven shaft;
anadjustment mechanism , a portion of which is coupled to said cover for rotation with said cover, said adjustment mechanism being at a radially outer position with respect to said release assembly; and
a radially extending lever member interposedbetween said release assembly and said adjustment mechanism, said lever member being coupled to an axial end of said adjustment mechanism , said lever member cooperating with said axial end of said adjustment mechanism and said release assembly to move said pressure plate to engage and disengage saiddriven member and said driving member , said axial end of said adjustment mechanism being at a first positiori relative to said cover prior to wear on said friction surface , said lever member further cooperating with said adjustment mechanism to move said axial erid of said adjustment mechanism to a second position relative to said cover after wear has occurred on said friction surface, said second position being axially spaced from said first position. 3840 36-
22
32
DRAWINGS: - 6 SHEETS ..
COMP. SPECN.:- 25 PAGES
28
24
A-A
IFig-2 248
THE GAZETTE OF INDIA , JANUARY 24 , 2004 ( MAGHA 4 , 1925 )
[PART III-SEC. 2 Ind.Cl .:
206 E
191963
IntCl
H 04 Q 7/00
Η1.4 Β 7/00
"AIME DIVISION MULTIPLE ACCESS (TDMA) RADIO TELEPHONE SYSTEM"
APPLICANTS )
NOKIA MOBILE PHONES LTD
PO BOX 86 , SF -24101
SALO , FINLAND
A LIMITED COMPANY ORGANIZED UNDER THE LAWS OF FINLAND.
INVENTOR ( 3) :
1. JARI HAMALAINEN;
2.ARTO KARPPINEN;
3. CHỊ CHUN HONKASALO;
4. HARRI JOKINEN;
5. WANG LING .
658/MAS/95
Application: No
Filed on 01 -Jun-95
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES 2003 ) PATENT OFFICE, CHENNAI BRANCH.
17 CLAIMS
A time division multiple access ( TDMA) radio telephone system for transmitting packet data over a packet radio connection comprising a base station and a mobile station, and at least one logical channel comprising a plurality of TDMA slots for transmitting packet data communication between the base station and the mobile station over a packet radio connection , individual ones of the TOMA slots of the at least one logical channel each occurring in a succession of physical TDMA frames, the at least one logical channel being reserved dynamically for packet data transmission according to need from the channels of one of the succession of TDMA frames , the number of reserved packet data channels being variable according to need , the at least one logical channel has a control channel (C ) comprising a plurality of control slots and an information channel ( 1 ) comprising a plurality of int rmation slots , wherein the control slots are temporally separated by consecutive information slots which occur in successive physical TDMA frames .
COOP.SPECN: 24 PAGES DRAWING : 6 SHEETS .
249.0 PART IH-SEC . 2 ]
THE GAZETTE OF INDIA, JANUARY 24, 2004 (MAGHA 4,1925)
40F
Ind. Cl .
191960 .
B 01 D 15/08
IntCI :
" A PROCESS FOR THE SIMULATED MOBILE BED SEPARATION OF A AROMATIC HYDRO CARBON FEED "
INSTITUT FRANCAIS DU PETROLE
APPLICANT( S) :
4, AVENUE DE BOIS - PREAU
92506 RUEIL -MALMASION CEDEX
FRANCE
KΑΙ ΤΑ 1 ΠΜ !
A FRENCH COMPANYIDA
1.HOTIER GERARD;
INVENTOR( S):
2. COHEN CHOUA;
HUАИЛЯ І
3. COUENNE NICOLASUBAY MA
4. TOUSSAINT JEAN MICHEALAMANC
23-Jun -95
filed on
776MAS95
APPLICATION NO :
mstariling i APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGSANald ( RULE 4; PATENTS RULES, 2003 ) PATENT OFFICE , CHENNAI BRANCH .
7 CLAIMS
streams being simultaneously shifted at substantially constant time intervals , the closed circuite between two successive columns or column sections , optionally at least one measuring origi A process for the simulated mobile bed separation of an aromatic hydrocarbon feed such as herein described containing at least two constituents in the presence of at least one eluent into at least two fractions of an extract or raffinate , comprising n, preferably 4 to 24 chromatographic columns or column sections mounted in series and in a closed sections mounted in series and in a closed circuit , in which a liquid, supercritical or gaseous mixture circulates under pressure , the circuit having at lest one feed injection stream , at least one eluent injection stream, at lest one extract extraction stream (EA) and at least one raffinate extraction stream (RB) , the desired constituent being either mainly in the extract or mainly in the raffinate, at least four zones each being determined in said columns , each zone being separated from the following zone by an injection or extraction stream, the injection and extraction comprising a recycling pump for said mixture , which is flow rate regulated and located sampling means and optionally at least one recycling pump which is pressure regulated, said measuring or sampling means and/ or the pressure regulated recycling pump (P) each being located between two consecutive columns or column sections , said pumps and/or measuring or sampling means each having a dead volume in the recycling circuit which causes perturbations in the extract and in the raffinate composition, the process being characterised in that, each time an extract extraction stream ( EA) or that of the raffinate (RB) passes from an immediately anterior position to an immediately posterior position to each of the dead volumes in the circuit, the flow rate of the flow rate regulated recycling pump is increased by an appropriate value for the time during which the extract or the raffinate remains in the immediately posterior position to the dead volume , and then when the stream passes from the immediately posterior position to the dead volume to the following position, the flow rate of the flow rate regulated recycling pump is reduced so that said flow rate regains the value which would have been applied if the dead volume had not been reached while obtaining one of the said coristituents.
COMP.SPECN : 25 PAGES DRAWING : 4- SHEETS .
250
[PART III-SEC. 2 THE GAZETTE OF INDIA , JANUARY 24 , 2004 ( MAGHA 4, 1925 )
Ind.Cl.:129 G.
191965
Int.Cl:F16C 003/10 .
" A METHOD OF MANUFACTURE OF A METALIC MEMBER OF THE IMPROVED FATIGUE STRENGTH AND A DEVICE FOR CARRYING OUT THE SAID METHOD . "
Applicant: INDIAN INSTITUTE OF TECHNOLOGY,
IIT PO , MADRAS 600 036,
TAMIL NADU , ( AN AUTONOMOUS BODY SET UP BT THE GOVT . OF INDIAN UNDER AN ACT OF PARLIAMENT) . INDIA .
Inventors: 1. RAMASWAMI VASUDEVAN;
2. POORNA CHANDRA MAJHEE;
3. MELATHERU RAMANUJAM SRIRAMAN .
Application No875/MAS/95 . filed on 12-Jul-95.
Appropriate office for Opposition Proceedings (Rule 4, Patents Rules, 2003) Patent Office , Chennai Branch .
4. Claims
Amethod of manufacture of a metallic member of improved fatigue strength comprising the steps of submerging the specimen of the said material in container of liquid; generating ultrasonic vibrations within the liquid close to the surface of the said specimen, thereby creating innumerable gas/ vapour filled bubbles, in the liquid, imploding on the surface of the said specimen .
INDIAN INSTITUTE OF TECHNOLOGY
ONE SHEET
875. MAS 95
P
DC POWER SUPPLY
TIMER
E
OSCILLATOR
HATCHING CIRCUIT
POWER INVERTER
MAGNE TO STRICTIVE TRANSDUCER
-CONCENTRATOR
ON/ OFF
DC DIAS
FREQUENCY COUNTER
-SPECIMEN
F1
Comp.Specn . 9. Pages ; Drgs 1. Sheets .
251 PART III-SEC . 2 ]
THE GAZETTE OF INDIA , JANUARY 24 , 2004 (MAGHA 4, 1925)
52A
Ind, Cl .:
191966
172C 5
IntCI
C03 B 37/16
D 01G1/04
"AN APPARATUS FOR FEEDING FIBRE THREAD PIECES"
APLICATOR SYSTEM AB
APPLICANT( S) :
METALLVAGEN 6 S -435 33
MOLNYCKE SWEDEN
A SWEDISH COMPANY
1. KJELL SAND .
INVENTOR ( S) :
913.MAS95
FiledOn
APPLICATION NO :
18-Jul-95
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES 2003 ) PATENT OFFICE , CHENNAI BRANCH .
2 CLAIMS
An apparatus for feeding out pieces of fibre thread along a path from a cutter ( 16, 17), e.g. reinforcing material for production of fibre reinforced plastic products , whereby the pieces of fibre thread are fed out either with the pieces oriented regularly or irregularly in their longitudinal direction , said apparatus comprising an ejector pipe ( 18 ) provided with a passage for fibre thread pieces from the cutter (16 , 17) and with a deflector surface (19), the ejector pipe ( 18 ) being pivotally arranged and being pivotable between a first position in which the passage through the ejector pipe ( 18 ) coincides with the direction of the path of fed out pieces thread , and a second position in which the deflector surface ( 19) is positioned in the path of the fed out pieces of fire thread. 10 12
11
13
19
17
14
15
18
16
COMP.SPECN: 8 PAGES DRAWING : 1 SHEET .
REFERENCE CITED: Co pending Application No : 911 /MAS/95 252
[PART III-SEC. 2 THE GAZETTE OF INDIA, JANUARY 24, 2004 ( MAGHA 4 , 1925)
Ind.Cl .:
191967
40 F, 206 E
Int Ci 4 :
G05 B 13/00
"AN APPARATUS RESPONSIVE TO A CONTROL SIGNAL FOR DEVELOPING A PRESSURE"
APPLICANT( S):
FISHER CONTROLS INTERNATIONAL INC . ,
A DELAWARE CORPORATION OF 8000MARYLAND AVENUE CLAYTON , MISSOURI 63105 USA
1. GEORGE W. GASSMAN .
INVENTOR( S) :
1014/MAS/95
filed on
Application No.
9-Aug-95
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES 2003 ) PATENT OFFICE , CHENNAI BRANCH.
11 CLAIMS
An apparatus responsive to a control signal for developing a pressure, comprising: a current -to-pressure transducer having means responsive to the control signal for developing the pressure; a filter disposed intermediate the control signal and the current- to -pressure transducer and having a dynamic input- to- output characteristic with a time constant which is adjustable to enable variation of the dynamic input-to-output characteristic; and means for selectively activating and deactivating the filter.
FIG . 2
60
55
52
54
UP
2
COMP.SPECN : 15 PAGES DRAWING : 2 SHEETS .
253 THE GAZETTE OF INDIA , JANUARY 24 , 2004 (MAGHA 4, 1925)
PART III-SEC . 2]
191968
74
Ind. Cl . :
D03D-27/08
IntCl 4
"A METHOD OF MANUFACTURIG AN ARTICLE OF TERRY CLOTH HAVING A DECORATIVE PANEL & AN ARTICLE THEREOF "
CANNING VÄLE WEAVING MILLS LTD ,
APPLICANT( S ):
AN AUSTRALIAN COMPANY OF 116 VULCAN ROAD , CANNING VALE, WESTERN AUSTRALIA,
AUSTRALIA 6155:
1. FRANCESCO ATTILIO PRAINITO.
INVENTOR( S) :
FiledOn 4-Sep-95
1142 MAS 95 .
APPLICATION NO :
AUSTRALIA
Filed on
PM-7929
7-Sep-94
CONVENTION NO :
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4, PATENTS RULES, 2003 ) PATENT OFFICE , CHENNAI BRANCH.
18 CLAIMS
Amethod of manufacturing an item of terry cloth having a decorative panel comprising the steps of weaving an item of terry cloth with a loopless , double- sided panel characterised in that at least one face of the panel is woven substantially with synthetic fusible fibre; and at least partially fuse the fusible fibre by applying heat and pressure to the said at least one face , to form a patterned surface on the said at least one face .
T
C
じょ CG
P - POLYESTER
16 INDS
C- COTTON
PILE
CRO
G
Fur 1.
DRAWING: 2 SHEETS .
COMP.SPECN : 14 PAGES
5427 GI/2003 254
[PART III-SEC . 2 THE GAZETTE OF INDIA , JANUARY 24, 2004 (MAGHA 4, 1925)
Ind .Cl .:
51 C
191969 IntCl :
B 26B 13/00
"A ROTATING CUTTING HEAD FOR PRODUCING FOOD SHREDS " APPLICANT( S):
SCHREIBER FOODS INC . OF 425 PINE STREET, GREEN BAY, WISCONSIN 54307-9010 , USA
A US COMPANY :
INVENTOR(S) :
1. ORVILE C FAGER
2. DENNIS R FERDON
3. SCOTT G ANDREWS
4. MATTHEW'T STENZEL
5. DAVID GARNETT
3034MAS 97
Application No.
filed on 31 Dec. ,97
Divisional to Patent Application No. 1097/MAS/96 Ante dated to 21st June 1996.
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4, PATENTS RULES 2003 ) PATENT OFFICE, CHENNAI BRANCH . 4 CLAIMS
FIG!
A rotating cutting head for producing food shreds of predetermined dimensions from an incoming sheet of food comprising; a rotating shaft mounted transversely to the directioner A of an incoming sheet of food; a plurality of spaced circular blades mounted to the rotating st shaft and substantially perpendicular to the longitudinal axis of the rotating shaft ; a pluralitysto of transverse blades mounted to the rotating shaft , substantially parallel to the longitudinal.. axis of the rotating shaft, the transverse blades extending between adjacent circular blades near the outer circumference of the circular blades ; an anvil which receives on a surface of the anvil an incoming sheet of food and which surface is disposed to co- operate with the circular blades and transverse blades to cut the incoming sheet of food to a desired width and length ; a motor which is operatively connected to the rotating shaft and which drives the rotating shaft.
23
COMP . SPECN .: 22 PAGES DRAWINGS : 8 SHEETS.
40-
REFERENCE: US 5527551 , US 4620838 , 1096/MAS/96:
3 255 PART IH-SEC.2 ]
THE GAZETTE OF INDIA, JANUARY 24 , 2004 ( MAGHA 4, 1925)
191970
Η 05 B 003/10
IntCI
собен политиятая A24 F001 /22
"TUBULAR HEATER FOR USE IN AN
huELECTRICAL SMOKING ARTICLE
бол, пионерый поrupaliw
PHILIP MORRIS PRODUCTS.INC
APPLICANT( S )
ww.amadhulam and
butshayriscb.carAUS
OF 3601 COMMERCE ROAD, RICHMOND , VIRGINIA 23234 , UNITED STATES OF AMERICA, COMPANY
2. SEETHARAMA C DEEVI ;
ALFRED L COLLINS;
GIAN SỬ DINVENTOR ( S)
4. ROBERT V GANSERT;
3. GRIER S FLEISCHHAUER ;
6. PATRICK H HAYES;
5.MOHAMMAD R HAJALIGOL ;
8. CHARLES T. HIGGINS;
7. HERBERT HERMAN:
10: A CLIFTON LILLY JR;
9. BILLY-JKEEN JR;
11. BERNARD C LAROY.
30-Jan-01
filed on
82MAS 01
APPLICATION NO :
Divisionalto Patent Application No: 397/MAS/95
Ante-datedto 31St. Mar, 1995
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4, PATENTS RULES , 2003 ) PATENT OFFICE , CHENNAI BRANCH .
8.CLAIMS
A heater for use in a smoking article having a source of electrical energy for heating tobacco flavor medium , the heater comprising:
asubstrate of electrically conducting material ;
an electrical insulátor deposited on at least a portion of said substrate , and.
an electrically resistive heater element deposited on said electrical insulator, a
first end of said heater element electrically connected to said electrically conducting substrate, wherein a second end of said heater element and a portion of said heater element between the first and second ends of said heater element are electrically insulated from said electrically conducting substrate by said insulator,
wherein said substrate and said second end of said heater element are adaptedto be electrically connected to the source of electrical energy , wherein a resistive ' heating circuit is formed to heat said heating element , which in turn heats the tobacco flavor medium .
FIG.1.
COMP.SPECN : 54 PAGES DRAWING: 12 SHEETS .
REFERENCE CITED : US 5093894 ; 5225498; 5060671 , 5095921 ; WO 94/06314 .
256
[PART III-SEC . 2 THE GAZETTE OF INDIA , JANUARY 24, 2004 (MAGHA 4 , 1925 )
RESTORATION PROCEEDINGS UNDER SECTION 60 OF THE PATENT'S ACT, 1970
Notice Is hereby given that an application was made under Section 60 of the Patents Act, 1970 for the restoration of Patent No. 184392 granted to Lancer Corporation for an Invention relating to a beverage dispenser with improved dispensing and cooling capacity.
The Patent ceased on 25.05.2002 due to non - payment of renewal fees within the prescribed time and the cessation of the Patent was notified in the Gazette of India, Part III , Section 2 dated 29.11.2003 .
Any interested person may give notice of opposition to the restoration by leaving a notice on Form 32 in duplicate , with the Controller ofPatents, The Patent Office , Nizam Palace , 2nd MSO Building , 5th, 6th & 7th Floors , 234/4 , Acharya Jagadish Chandra BoseRoad, Kolkata - 700020 on or before under Rule 69 of the Patents Rules, 1972. A written statement in triplicate , setting out the niature of the opponents interest , the facts upon which he bases his case and the relief he seeks , shall be filed with the notice or within one month from the date of the notice .
Notice Is hereby given that an application was made under Section 60 of the Patents Act, 1970 for the restoration of Patent No. 185729 granted to American Cyanamid Company for an invention relating to a process for protecting wood , werd products , or wooden structures from damage and destruction caused by termites .
The Patent ceased on 18.07.2002 due to non - payment of renewal rees within the prescribed time and the cessation of the Patent was notified in the Gazette of India, Part III , Section 2 dated 29.11.2003 .
Any interested person may give notice of opposition to the restoration by leaving a notice on Form 32 in duplicate, with the Controller ofPatents , The Patent Office , Nizam Palace , 2nd MSO Building , 5th, 6th & 7th Floors , 234/4, Acharya Jagadish Chandra Bose Road , Kolkata - 700020 on or before under Rule 69 of the Patents Rules , 1972. A written statement in triplicate , setting out the nature of the opponents interest, the facts upon which he bases his case and the relief he seeks , shall be filed with the notice or within one month from the date of the notice .
Notice Is hereby given that an application was made under Section 60 of the Patents Act, 1970 for the restoration of Patent No. 187599 granted to Hoechst Celanese Corporation for an invention relating to a process for the preparation of 4- arylbut- 3 - en- 2-ones .
The Patent ceased on 23.04.2003 due to non -payment of renewal fees within the prescribed time and the cessation of the Patentwas notified in the Gazette of India, Part III , Section 2 dated 29.11.2003 .
Any interested person may give notice of opposition to the restoration by leaving a notice on Form 32 in duplicate , with the Controller of Patents , The Patent Office , Nizam Palace, 2nd MSO Building , 5th, 6th & 7th Floors , 234/4 , Acharya Jagadish Chandra Bose Road , Kolkata- 700020 on or before under Rule 69 of the Patents Rules , 1972. A written statement in triplicate, setting out the nature of the opponents interest, the facts upon which he bases his case and the relief he seeks , shall be filed with the notice or within one month from the date of the notice.
CANCELLATION PROCEEDINGS UNDER SECTION 19( 1 )
"An application in the name of M /s . Murphy Cosmetics Co for Cancellation of Registered Design No. 191234 was filed on 28th July 2003 in class 28-02 in the name M/s . Manju Dollar Cosmetics."
Cessation of Patents
182201 181337
CHENNAI : 01-06-2003 ΤΟ 31-07-2003
RENEWAL FEES PAID
181190 180669 176793 181949 188118 188149 182575 187973 187551 177949 188103 188159 188112 188223 188244 180781 188140 174492 186746 187091 185318 178551 184678 181977 .
179597 188105 188120.179898 182778 187974 186752 180797 188151 188160 188211 188224 188245 180782 179374 183030 179394 175102 181558 179648 185046 181978 179598 188106 188142 186466 177947 187978 185832 183387 188152 188229 188213 188228 188246 182186 184981 183211 178744 178341 186743 180676 185047 182005 179600 188107 188143 173116 180808 187980 181431 179270 188153 188247 188214 188232 183760 183782 182008 182226 257 THE GAZETTE OF INDIA , JANUARY 24, 2004 ( MAGHA 4 , 1925 )
PART III- SEC . 2 ]
176798
182886
186744
188144
188110
187971
185313 187534
180275
182885
179669
182228
180277
183520
184471
185050
183783
183349
188235
188215
188249
188154
180798
178120
183516
178743
181553
184384 180770
188145
188111
180668
182482
186741
180768
183001
179899
186742
180675
183784
174894
177753
180810
181306
188238
188218
188250
188155
173156
188156
174573
175098
182776
174053
185425
188146
188113
184267
182499
185421
182573
185422
181307
184173
178130
184545
181557
184338
174305
187790
188239
188219
188220
188241
187659
188157
180691
185213
179893
187871
183781
188147
188114
179425
188117
182271
173656
185423
181573
174273
179858
174739
179861
181305
188132
184790
188138
185430
188243
188222
186745
188158
188102
185833
185314
187972
180807
188148
184983
187880
185836
178100
180821
179639
181798
174379
185317
184932
179864
187531
183841
180131
178634
188350
184931
184345
185835
181030
187671
179614
173319
179300
188135
176800
180286
184130
182276
180137
184707
184617
182705
182704
187539
179347
176647
181989
181029
179350
180789
187093
174495
180783
180799
182574
174307
188364
176802
180139
182890
180788
179836
181850
176773
188365
188136
182024
184988
184175
177950
187814
188361
188366
188343
182046
184987
178081
182022
184800
185436
179395
188342
182700
187577
172957
174287
184919
184904
187976
177289
180288
185834
187212
178094
187752
180841
182481
187977
177418
182023
181574
176818
183388
182779
188369
184144
187979
178095
182047
184544
173126
174962
187800
188370
188344
185837
184917
184125
181040
175062.182698
179486
183389
188347
183002
180281
179628
181981
181575
184343
185214
182050
188348
174963
182083
180283
184706
181931
184145
181571
179262
188349
184918
178801
185431
180687
184619
179151
176808
179889
184176
172648
181950
175881
PATENT SEALED ON 26-12-2003 ( KOLKATA)
189908 190083 190084 190086 190087 190089 190121 190122 190123 190124 190125 190126 190129 190133 190191 190194 190197
KOL- 17
( 427 GI/2003 258
THE GAZETTE OF INDIA , JANUARY 24, 2004 ( MAGHA 4 , 1925 )
[PART III-SEC . 2
REGISTRATION OF DESIGNS
The following designs have been registered . They are open for public inspection from the date of registration . ( Colour combination if any , is not shown in the representation)
The dates shown in the following each entry is the date of registration .
Class 09-03 No.192592 . NISSAN PLAST OF SURVEY NO . 655/ 1 / B , NEAR SOMNATH CO- OP . SOCIETY, SOMNATH ROAD , DABHEL , NANI DAMAN , DAMAN - 396310 , U.T. DAMAN, INDIA. " CONTAINER " 15th July 2003.
Class 12-11 No.192493 . EASTMAN INDUSTRIES LTD . OF C-87 , PHASE - V , FOCAL POINT , LUDHIANA - 141010 ( PB.) INDIA. " BICYCLE FRAME " 1" July 2003.
Class 02-07 No.192492 . OSCAR METAL CRAFT ( P ) LTD . OF VILLAGEKOT SEKHON , 289 , MILESTONE , G.T. ROAD , DORAHA , DISTT. LUDHIANA ( PB , INDIA. " PANT HOOK: 1 " July 2003.
OSCARI
Class 02-04 No.192979 . API POLYMERS ( INDIA) LTD . OF J - 17 , UDYOG NAGAR , NEW DELHI - 110041 , INDIA . " SOLE FOR FOOTWEAR " 25th August 2003 .
259 THE GAZETTE OF INDIA , JANUARY 24 , 2004 ( MAGHA 4 , 1925 )
PART III-SEC . 2]
12-16
Class
No.192218 . ROOTS AUTO PRODUCTS PVT . LTD . OF RKG INDUSTRIAL ESTATE, GANAPATHY P.O. COIMBATORE - 641006 , TAMIL NADU , INDIA . "AIR HORNS FOR VEHICLES " 27th may 2003 .
02-04
Class
No.192435 . ALERT INDIS OF C - A, S.M.A. INDUSTRIAL ESTATE , G.T. KARNAL ROAD , DELHI - 110033 , INDIA. " SOLE OF FOOTWEAR " 24th June 2003 .
24-01
Class
No.192206 . DR . KALLIPATTI KALIANNAN DHARSHNAMOORTHY , 67, CUTCHERY STREET , GOBICHETTYPALAYAM -638452 , TAMIL NADU , INDIA. " INFUSION SET" 27th May 2003 .
05-05
Class
No. 191948, THE RISHABH VELVELEEN LTD . OF 9TH KM, HARDWAR- DELHI ROAD , NEAR RANIPUR TOLL BARRIER, JWALAPUR, HARDWAR - 249407 , U.P. INDIA. " TEXTILE FABRIC" 16th April 2003.
Class 09-01 No.192385 . BEAUTE PRESTIGE INTERNATIONAL , A FRENCH SOCIETE , ANONYME , 28/32 , AVENUE VICTOR HUGO. 76116, PARIS FRANCE . " PERFUME BOTTLE " 31" January 2003 (Reciprocity , France) 260
[PART III-SEC . 2 THE GAZETTE OF INDIA , JANUARY 24 , 2004 (MAGHA 4 , 1925 )
Class 14-02 No.192017 . SEIKO EPSON CORPORATION OF 4-1 , NISHI - SHINJUKU , 2 - CHOME , SHINJUKU- KU , TOKYO, JAPAN . " INK CARTRIDGE FOR PRINTER " 29th October 2002 ( Reciprocity , Japan)
10-05
Class
No.192034. SANJEEV KHOSLA AND AARTI KHOSLA OF S - 158 , GREATER KAILASH PART 11, NEW DELHI - 110048 , INDIA. " SIGNAL HEALTH MONITOR" 5th May 2003.
23-04
Class
No.192179 . RECKITT BENCKISER (U.K. ) LTD , OF 103-105 , BATH ROAD , SLOUGH , BERKSHIRE , SL1 , 3UH , U.K. " AIR FRESHNER DEVICE " 23rd Nov. 2002 ( Reciprocity , U.K. )
Class 05-05 No.192311 . GOLDTEX FURNISHING INDUSTRIES , 78/1197 TRI NAGAR , DELH1-110035 , INDIA , " TEXTILE FABRIC " 10th June 2003.
06-01
Class
No.192109 . GRAMMER AG , OF WERNHER - VON- BRAUN - STR.6 , D- 92224 AMBERG , GERMANY, A GERMAN COMPANY : " VEHICLE SEAT " 27th Nov. 2002 ( Reciprocity. Germany) .
261 THE GAZETTE OF INDIA , JANUARY 24, 2004 (MAGHA 4, 1925)
PART III-SEC . 2 ]
07-02
Class
No.192188 . ASIAN PLASTOWARES PVT. LTD. of PLOT D- 7/ 1 , ROAD NO.16, MIDC, ANDHERI (EAST) , MUMBAI : -400 093 , MAHARASHTRA, INDIA, INDIAN . " CASSEROLE" 26th May 2003.
09-03
Class
No.192346 . ALEX JEWELLERY PVT. LTD . , ofPLOT NO.74/ A , GOVT. IND . ESTATE , CHARKOРЕ, KANDIVALI (W), MUMBAI: -400 067, MAHARASHTRA, INDIA. " JEWELLERY BOX " 13th June 2003 .
09-03
Class
CITIZEN No.192421 . ELECTRONICS CORPORATION, A- 21 /5 , NARAINA , PHASE- II , NEW DELHI : -28 , ( INDIA) , " TWO- WHEELER SIDE BOX" 23rd June 2003 .
02-04
Class
No.192389 . DHUPAR SHOE AID (P) LIMITED , AN INDIAN COMPANY AT 7/82 , TILAK NAGAR, KANPUR ( U.P. ), INDIAN, " SOLE OF FOOTWEAR" 19th June 2003 .
13-03
Class
INDUSTRIAL AREA, No.192330. S.N. INDUSTRIES , PLOT NO.19 , OPPOSITE STREET NO.4, NEW ROHTAK ROAD , NEW DELHI : -5 , "GLASS CONNECTOR " 30th June 2003 .
262
[PART III-SEC . 2 THE GAZETTE OF INDIA , JANUARY 24, 2004 ( MAGHA 4, 1925)
Class 02-04 No.192387.. DHUPAR SHOE AID(P) LIMITED, AN INDIAN COMPANY AT 7/82, TILAK NAGAR, KANPUR ( U.P. ) , INDIAN , " SOLE OF FOOTWEAR " 19th June 2003 .
Class 12-11 No.192506 . EASTMAN INDUSTRIES LTD. OF C-87, PHASE - V , FOCAL POINT , LUDHIANA - 141010 (PB. ) INDIA. " BICYCLE CHAIN COVER " 3rd July 2003 .
Class 06-01 No.192108 . GRAMMER AG , OF WERNHER - VON- BRAUN - STR.6 , D- 92224 AMBERG , GERMANY, A GERMAN COMPANY . " VEHICLE SEAT" 27th Nov. 2002 (Reciprocity . Germany) .
Class 05-05 No.192306. SUVICHAI JANETHANA - ARTHAKIJ , AT 437 MOO 2 , BANGPAKOK, RATBURANA, BANGKOK 10140 , THAILAND . " KEY " 10th June 2003
Class 05-05 No.192599 . THE RISHABH VELVELEEN LIMITED , of9TH KM , HARDWAR - DELHI ROAD, NEAR RANIPUR TOLL BARRIER , JWALAPUR, HARDWAR: 249 407 , U.P. , INDIA. " TEXTILE FABRIC" 11th July 2003 263 THE GAZETTE OF INDIA , JANUARY 24 , 2004 (MAGHA 4, 1925 )
PART III-SEC . 2]
23-02
Class
No.192011. FRIEDRICH GROHE AG & CO. KG of AN DER EGGE 19, D- 58636 ISERLOHN , GERMANY. " SHOWER " 15th November. 2002 (Reciprocity, Germany)
Class 23-02 No.192008 . FRIEDRICH GROHE AG & CO . KG of AN DER EGGE 19, D- 58636 ISERLOHN , GERMANY. " SHOWER" 15th November . 2002 (Reciprocity, Germany)
Class 02-04 No.192049. M/ S . TRELA FOOTWEAR EXPORTS PVT. LTD . , of D - 38 , SITE - C , INDUSTRIAL AREA , SIKANDRA , AGRA - 282007 , U.P. , ( INDIA). " SOLE FOR FOOTWEAR " 6th May 2003
Class 04-02 No.192497 . THE GILLETTE COMPANY OF PRUDENTIAL TOWER BUILDING , BOSTON , MASSACHUSETTS 02199, U.S.A. " TOOTHBRUSH HANDLE " 11th January 2003 ( Reciprocity, Germany).
10-06
Class
No.192573 . RAJINDERA ENGINEERS ( INDIA) OF C- 113 , PHASE- V , FOCAL POINT, LUDHIANA- 141010 ( PUNJAB) INDIA . " BELL " 11th July 2003 .
264
THE GAZETTE OF INDIA , JANUARY 24 , 2004 ( MAGHA 4 , 1925 )
[ PART III-SEC . 2 Class 10-06 No.192572 . RAJINDERA ENGINEERS ( INDIA) OF C -113 , PHASE-V, FOCAL POINT, LUDHIANA- 141010 ( PUNJAB ) INDIA . " BELL " 11th July 2003.
2
Class 23-04 No.192257 . E F SEELEY NOMINEES PTY LTD . OF AUSTRALIA , 1-11 ROTHESARY AVENUE , ST . MARYS , SOUTH AUSTRALIA , AUSTRALIA. " AN EVAPORATIVE AIR " 31st January 2003 (Reciprocity , AUSTRALIA) .
05-05
Class
No.192090 . GOLDTEX FURNISHING INDUSTRIES, 78/1197 , TRI NAGAR , DELHI - 110035 , INDIA, " TEXTILE FABRIC " 9th May 2003 .
Dr. S. N. MAITY
Controller General of Patents , Designs & Trade Marks प्रबन्धक, भारत सरकार मुद्रणालय , फरीदाबाद द्वारा मुद्रित एवं प्रकाशन नियंत्रक , दिल्ली द्वारा प्रकाशित , 2004
PRINTED BY THE MANAGER . GOVERNMENT OF INDIA PRESS , FARIDABAD AND PUBLISHED BY THE CONTROLLER OF PUBLICATIONS , DELHI , 2004