रजिस्ट्री सं. डीएल ( एन )-04/0007/2003--05
REGISTERED No. DL ( N)-04/0007/2003-05 भारत की राजपत्र The Gazette of India
साप्ताहिक/WEEKLY
प्राधिकार से प्रकाशित
PUBLISHED BY AUTHORITY
नई दिल्ली, जनवरी 31 फरवरी 6, 2004 ( माघ 11, 1925)
सं० 5]
NEW DELHI, SATURDAY, JANUARY 31 - FEBRUARY 06, 2004 (MAGHA 11 , 1925)
No. 5]
इस भाग में भिन्न पृष्ठ संख्या दी जाती है जिससे कि यह अलग संकलन के रूप में रखा जा सके । (Separate paging is given to this Part in order that it may be filed as a separate compilation)
भाग III-खण्ड 2
[PART HI-SECTION 2 ]
[पेटेन्ट कार्यालय द्वारा जारी की गई पेटेन्टों और डिजाइनों से सम्बन्धित अधिसूचनाएं और नोटिस] [Notifications and Notices Issued by the Patent Office relating to Patents and Designs] THE PATENT OFFICE
PATENTS AND DESIGNS Kolkata, the 31st January 2004
ADDRESSES AND JURISDICTIONS OF THE OFFICES OF THE PATENTS OFFICE
The Patent Office has its Head Office at Kolkata and Branch Offices at Mumbai , Delhi and Chennai having Territorial Jurisdiction on a Zonal basis as shown below:-
1. Patent Office Branch , Todi Estates, IIIrd Floor , SunMill Compound, Lower Parel (West), Mumbai-400013 .
The States ofGujarat, Maharashtra, Madhya Pradesh and Goa and the Union Territories of Daman and Diu & Dadra and Nagar Haveli:
Telegraphic Address " PATOFFICE "
Phone Nos . (022 ) 2492 4058, 2496 1370, 2492 3684, 24903852
Fax:Nos. (022) 24950622, 2490 3852
E-mail: [email protected]
(265)
1-437G1/2003
2. Patent Office Branch , W-5, West Patel Nagar, New Delhi- 110008 .
The States of Haryana , Himachal Pradesh, Jammu and Kashmir,
Punjab, Rajasthan, Uttar Pradesh and Delhi and the Union Territory ofChandigarh .
Telegraphic Address "PATENTOFIC" Phone Nos . (011 ) 2587 1255, 2587 1256, 2587 1257, 2587 1258 . Fax No. (011) 2587 1256.
E-mail :[email protected]
3. Patent Office Branch , GunaComplex, 6th Floor, Annex - II, 443 , Annasalai , Teynampet, Chennai -600018 .
The States of Andhra Pradesh , Karnataka, Kerala , Tamil Nadu and
Pondicherry and the Union Territories of Laccadive , Minicoy and Aminidivi Islands .
266
Telegraphic Address " PATENTOFFIC"
Phone Nos . (044) 2431 4324/4325/4326. Fax Nos . (044) 2431 4750/4751 .
E-mail . patentchennai @vsnl . net
4. Patent Office (Head Office) , Nizam Palace , 2nd M.S.O. Building, 5th, 6th & 7th Floor, 234/4 , Acharya Jagadish Bose Road , Kolkata-700020.
Restof India.
Telegraphic Address "PATENTS " Phone Nos . (033 ) 2247 4401/4402/4403 .
पेटेंट कार्यालय एकस्व तथा अभिकल्प
कोलकाता, दिनांक 31 जनवरी 2004
पेटेंट कार्यालय के कार्यालयों के पते एवं क्षेत्राधिकार पेटेंट कार्यालय का प्रधान कार्यालय कोलकाता में अवस्थित है तथा मुम्बई , दिल्ली एवं चेन्नई में इसके शाखा कार्यालय हैं, जिनके प्रादेशिक क्षेत्राधिकार जोन के आधार पर निम्न रूप में प्रदर्शित हैं:-- 1. पेटेंट कार्यालय शाखा, टोडी इस्टेट, तीसरा तल, सनमिल कम्पाउंड, लोअर परेल (वेस्ट) , मुम्बई - 400 013 1
गुजरात, महाराष्ट्र, मध्य प्रदेश तथा गोआ राज्य क्षेत्र एवं संघ शासित क्षेत्र , दमन तथा दीव एवं दादर और नगर हवेली ।
तार पता : " पेटोफिस "
फोन: (022 ) 24924058 , 2496 1370, 2492 3684, 2490 3852 फैक्स: (022 ) 2495 0622, 2490 3852
ई. मेल: [email protected]
2. पेटेंट कार्यालय शाखा, डब्ल्यू-5, वेस्ट पटेल नगर, नई दिल्ली 1100081
हरियाणा, हिमाचल प्रदेश, जम्मू तथा कश्मीर , पंजाब, राजस्थान , उत्तर प्रदेश तथा दिल्ली राज्य क्षेत्रों एवं संघ शासित क्षेत्र चंडीगढ़ ।
तार पता : " पेटेंटोफिक" फोन : ( 011 ) 2587 1255 , 2587 1256 , 2587 1257 , 2587 1258 .
फैक्स: ( 011 ) 2587 1256 . ई. मेल : [email protected]
THE GAZETTE OF INDIA, JANUARY 31 , 2004 (MAGHA 11 , 1925 )
[ PART III-SEC . 2 Fax Nos . (033 ) 2247 3851 , 2240 1353. E-mail . patentin @ vsnl.com patindia@ giasc101.vsnl.net.in
Website : http : /Ipindia.nic.in
All applications , notices , statements or other documents orany fees required by the Patents Act, 1970 and the Patents (Amendment) Act, 2002 or by the Patents Rules , 2003 will be received only at the appropriate offices of the Patent Office .
Fees : The fees may either be paid in cash or may be sent by Bank Draft or Cheques payable to the Controller of Patents drawn on a scheduled Bank at the place where the appropriate office is situated.
3. पेटेंट कार्यालय शाखा, गुना कम्प्लेक्स, छठा तल, एनेक्स- II, 443, अन्नासलाई, तेनामपेट, चेन्नई - 600 018 ।
आन्ध्र प्रदेश, कर्नाटक , केरल , तमिलनाडु तथा पाण्डिचेरी राज्य क्षेत्र एवं संघ शासित क्षेत्र लक्षद्वीप , मिनिकाय तथा एमिनिदिवि द्वीप । तार पता " पेटेंटोफिक" फोन: (044) 2431 4324/4325/4326 . फैक्स: (044 ) 2431 4750/4751 . ई. मेल : [email protected]
4. पेटेंट कार्यालय ( प्रधान कार्यालय ), निजाम पैलेस, द्वितीय बहुतलीय कार्यालय भवनं , 5वां , 6ठा व 7वां तल, 234/4, आचार्य जगदीश बोस मार्ग , कोलकाता - 700 0201
भारत का अवशेष क्षेत्र ,
तार पता - " पेटेंट्स"
फोन: (033) 2247 4401/4402/4403 .
फैक्स: ( 033 ) 2247 3851 , 2240 1353 .
ई.मेल: [email protected]
[email protected] वेब साइट : http./Ipindia.nic.in
पेटेंट अधिनियम , 1970 तथा पेटेंट ( संशोधन ) अधिनियम, 2002 अथवा पेटेंट नियम, 2003 द्वारा अपेक्षित सभी आवेदन, सूचनाएं, विवरण या अन्य दस्तावेज या कोई फीस पेटेंट कार्यालय के केवल समुचित कार्यालय में ही ग्रहण किए जाएंगे ।
शुल्क : शुल्कों की अदायगी या तो नकद की जाएगी अथवा जहां उपयुक्त कार्यालय अवस्थित हैं , उस स्थान के अनुसूचित बैंक से नियंत्रक , पेटेंट को भुगतान योग्य बैंक ड्राफ्ट अथवा चैक द्वारा की जा सकती है। 267 PART III-SEC . 2 ]
THE GAZETTE OF INDIA, JANUARY 31 , 2004 (MAGHA 11 , 1925)
अभिगृहित पूर्ण विनिर्देश
एतद्वारा सूचना दी जाती है कि आवेदनों में किसी पर पेटेंट अनुदान का विरोध करने वाले इच्छुक व्यक्ति राजपत्र के इस निर्गमन की तिथि से चार महीने के भीतर या उक्त चार महीने की समाप्ति के पूर्व, प्ररूप 4 में यदि आवेदित किया हुआ हो, तो परवर्ती एक महीने के भीतर, किसी समय, नियंत्रक , पेटेंट को ऐसे विरोध की सूचना प्ररूप 7 में उपयुक्त कार्यालय में दे सकते हैं । विरोध का लिखित कथन साक्ष्य के साथ , यदि कोई हो, दो प्रतियों में उक्त सूचना के साथ या अगले दो महीने की अवधि के भीतर दाखिल किया जाए । इस संदर्भ में , यथा संशोधित पेटेंट अधिनियम, 1970 की धारा 25 एवं पेटेंट नियम, 2003 के नियम 55 से 57 का अवलोकन किया जा सकता है । उपयुक्त कार्यालय द्वारा विनिर्देश एवं चित्र आरेख , यदि हो, के छायाप्रति की आपूर्ति छायाप्रति शुल्क के रूप में प्रति पृष्ठ रु. 4/- की अदायगी पर की जा सकती है ।
COMPLETE SPECIFICATION ACCEPTED
Notice is hereby given that any person interested in opposing the grant of a Patent on any of the Applications , may, at any time within four months from the date of this issue of Gazette or within further period of one month if applied for in Form 4 before the expiry of the said period of four months , give notice to the Controller of Patents at the Appropriate Office on Form 7 of such opposition. The Written Statement of Opposition accompanied by evidence , if any, should be filed in duplicate alongwith the said notice or within further period of two months . Section 25 of The Patents Act, 1970 as amended and Rules 55 to 57 of The Patents Rules , 2003 may be referred to in this regard.
Photo copies of the specification and drawings , if any, can be supplied by the Appropriate Office on payment of photocopying charges @ Rs . 4/- per page .
[PART III-SEC. 2 268
THE GAZETTE OF INDIA , JANUARY 31 , 2004 (MAGHA 11 , 1925 )
191971 :
Ind.Cl
A 61 F 13/15
128 A
Int.Cl
:
AN ABSORBENT ARTICLE
Title
Applicant :
MCNEIL - PPC , INC . OF 199 GRANDVIEW ROAD, SKILLMAN, NJ 08558 , UNITED STATES OF AMERICA.
15 Inventor
1. CATHERINE E. SALERNO
2 . TENNY JERSCHKOW .
3. MICHELE GENTILE .
1495 / CAL/ 1996 FILED ON 21.08.1996
Application no .
(CONVENTION NO . 08/522 881 FILED ON 01.09.1995 IN UNITED STATES OF AMERICA. ) APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)
PATENT OFFICE KOLKATA.
13 CLAIMS.
An absorbent article ( 5 ) having longitudinal sides ( 100 ) and transverse ends ( 110 ) , a body- facing surface ( 20 ) and a garment- facing surface said article ( 5 ) comprising .
a ) a fluid - permeable cover ( 10 ) on said body - facing surface ( 20 ) ;
a fluid - impermeable barrier ( 30 ) on said garment- facing. b) surface;
c) a fluid - absorbent core ( 40 ) containing wood pulp fluff between the fluid - permeable cover ( 10 ) and the fluid impermeable barrier ( 30 ) , said fluid- absorbent core ( 40 ) having a central region ( 60 ) and transverse ends ( 130 ) and thickness of at least 0.20 inches ; and a
d) a stabilizing absorbent element ( 120 ) adjacent an upper portion of the central region ( 60 ) of the absorbent core , wherein the stabilizing element ( 120 ) is capable of absorbing fluids and remaining stable when wet , and wherein the stabilizing element has a lateral width in a range of from at least 0.5 inches to less than 1.75 inches .
5
140
100
60
70
130
130
110
742
27
20
10
50
50
140
100
Complete Specifications : 39 pages .
Drawings: 1 sheet 269 THE GAZETTE OF INDIA, JANUARY 31 , 2004 (MAGHA 11 , 1925)
PART III-SEC . 2]
191972 :
Ind.Cl
32F 3(B)
C 12 N 15/55 C 12 N 9/16 C 12 N 9/18 C 02 F 1/58
Int.Cl :
Title
A PROCESS FOR PRODUCING AN ENZYME TERMED MALATHION CARBOXYLESTERASE (MCE .)
Applicant :
COMMONWEALTH SCIENTIFIC AND INDUSTRIAL RESEARCH ORGANISATION , OF LIMESTONE AVENUE, CAMPBELL ACT, 2601 AUSTRALIA .
2. RICHARD DAVID NEWCOMB 1. ROBYN JOYCE RUSSELL.
Inventor :
3. PETER MALCOLM CAMPBELL .
4. GEOFFREY CHARLES DE QUETTEVILLE ROBIN.
5. CHARLES GLAUDIANOS .
7. THOMAS MARK BOYCE .
6. KERRIE - ANN SMYTH.
8. JOHN GRAHAM OAKESHOTT.
9. JEREMY COLIN BROWNLIE .
2033/CAL/ 1996 FILED ON 26.11.1996
Application no.
(CONVENTION NO. PN6751 FILED ON 23.11.1995 IN AUSTRALIA.)
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)
PATENT OFFICE KOLKATA .
6CLAIMS.
A process for producing an enzyme termed malathion carboxyl esterase (MCE) which is capable hydrolysing at least one organophosphate selected from the group consisting of carboxylester organopgosphates and dimethyl - oxon organophosphates, or an enzymatically active portion thereof, the process comprising
i) transforming a host cell with a DNA molecule comprising a nucleotide sequence having at least 60% homology with LeaE7 , in which the MCE enzyme
encoded by the DNA molecule differs from E3 at least in the substitution of Trp at position 251 with an amino acid selected from the group consisting of Leu , Ser , Ala, Ile , Val , Thr , Cys, -Met and Gly, operatively linked to a control sequence,
ii ) culturing the transformed cell under conditions which allow expression of the DNA sequence , and iii ) recovering the produced MCE enzyme or an enzymatically active portion thereof.
Drawings: 11 sheets
CompleteSpecifications : 34 pages.
270
[PART III-SEC. 2 THE GAZETTE OF INDIA , JANUARY 31 , 2004 (MAGHA 11 , 1925)
Ind.Cl
:
174 F
191973 Int.Cl'
:
F 16 F 9/02 , 9/36
Title
:
ADJUSTABLE - LENGTH GAS SPRING .
Applicant :
SUSPA COMPART AKTIENGESELLSCHACFT , OF INDUSTRIESTRASSE 12-14, D- 90518 , ALTDORF , FEDERAL REPUBLIC OF GERMANY.
Inventor :
1 . HERBERT WOLF .
2. HANS - PETER BAUER .
218 /CAL/ 1997 FILED ON 07.02.1997
Application no .
(CONVENTION NO. 19604962.8 FILE ON 10.02.1996 IN GERMANY.)
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)
PATENT OFFICE KOLKATA.
10 CLAIMS.
Anadjustable - length gas spring comprising:
a housing ( 1 , 72) having a central longitudinal axis (21 , 73 ), a piston rou (8, 83) led out of the housing ( 1 , 72) at an axis concentrically of the central longitudinal axis (21 , 73 ),
a piston ( 5 , 87) arranged on the piston rod (8, 83) and displaceable in the housing ( I , 72) and dividing the housing (I, 72) into a first partial housing chambers ( 17,93) and a second partial housing chamber (20,94) ,
a valve ( 19 , 88, 19 " ) for connecting said first partial housing chambers ( 17,93 ) and said second partial housing chamber (20,94) , passageway (49,49' ) connecting said first partial housing chamber ( 17,93 ) with said valve ( 19,88,19' ) ,
said valve ( 19~88,19 " ) comprising a seal (45 , 45' ) and a valve - operating lever
(34,34' , 34 " ) having a longitudinal directional with a valve seat (46, 46), said valve- operating lever (34, 34', 34 " ) being arranged pivotably at right angles to said longitudinal direction out of a rest position into anopening position ,
wherein in said rest position said valve seat (46, 46') rests on said seal (45, 45' ) separating said passageway (49, 49' ) from said second partial housing chamber (20 , 94) and wherein in said opening position a gap (51 , 51 ' ) is formed between said valve seat (46, 46' ) and said seal (45 , 45 ' ) , connecting said passageway (49, 49' ) with said second partial housing chamber (20, 94) .
Complete Specifications : 18 pages.
Drawings: 5 sheets PART III-SBC. 2]
271 THE GAZETTE OF INDIA , JANUARY 31 , 2004 ( MAGHA 11 , 1925)
Ind.Cl
:
157A4
191974
Int.Cl
B61L 5/06 , 7/08
Title
:
REVERSING SWITCH FOR SWITCHING THE RUNNING DIRECTION OF A RAILWAY SWITCH DEVICE .
Applicant :
SIMENS AKTIENGESELLSCHAFT OF WITTELSBACHERPLATZ 2, 80333 MUNCHEN GERMANY
Inventor :
JURGEN KLAUS .
Application no. 238/CAL/ 1997 FILED ON 11.02.1997 (CONVENTION NO. 19606893.2 FILED ON 13.02.1996 IN GERMANY.)
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003) PATENT OFFICE KOLKATA.
4.CLAIMS.
-R/1
K1
+R/2
R2
+R/3
L/2
L
K2
L2
L1
L/3
L/1
Reversing switch for switching the running direction of a railway switch device using bistable position relays whose contacts switch without any load and at the same time prepare the connection of the motor winding/motor windings for the subsequent revolution of the drive , characterized [PART III-SEC. 2 THE GAZETTE OF INDIA , JANUARY 31 , 2004 (MAGHA 11 , 1925)
272
that two direction relays (R. , L) are provided which are
assigned to one or the other running direction of the drive (WA)
and are designed as switching relays , each of which can be controlled from another computer channel ( k1 , k(2 ) of a computer
device , said bistable position relays (R1 , L1 , R2 , L2) each have only a single winding and are connected in series in pairs (R1 , L2 ; R2 , LI) such that one (R1 , R2) changes into the active position in one current direction , and the other (L1 , L2) changes into the active position in the other current direction , the series circuit formed by the bistable relays is connected via a make contact (R1 /1 ) of one direction relay (R) to one pole (+)
of a supply Source , and via a break contact (L/l ) of the other
said direction relay (L) to the other pole (-) of the voltage
source , the series circuit formed by the bistable relays with the make contact and break contact , respectively of one or the other direction relay, respectively , is in each case connected in parallel with the series circuit formed from a break contact (R/2) or (R/3 ) , respectively of one or the other make contact ( L/2 ) or ( L/3 ) , respectively , of the other direction relay .
Drawings: 1 sheets Complete Specifications : 12 pages .
273 THE GAZETTE OF INDIA , JANUARY 31 , 2004 (MAGHA 11 , 1925 )
PART III-SEC . 2]
191975 134 A
:
Ind.Cl
Int.Cl
: H01H , 15/02 , 15/24
AN ELECTRIC SLIDE SWITCH.
:
Title
Applicant :
KABUSHIKI KAISHA T AN T. OF 972-1 , AZA- SAKASHITA, KAWAGOE - SHI, SAITAMA, PREFECTURE, JAPAN .
KOUICHI SINZAWA . 1.
Inventor :
2.. YOJI YABATA.
TSUNEFUKE ΤΑΚΑΝΟ
३-
290/CAL/ 1997 FILED ON 18.02.1997
Application no.
(CONVENTION NOS. 8-73256; 8-79474; 8-111904 AND 8-137556 FILED ON 04.03.1996 , 07.03.1996, 09.04.1996AND ON 08.05.1996 IN JAPAN RESPECTIVELY .)
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)
PATENT OFFICE KOLKATA.
10 CLAIMS.
FIG . I
la
90
2
20
مل
9
7
An electric slide switch comprising a body (1 ) member defining therein a hollow interior, an operating member (3 ) housed within the hollow interior of the body member and movable relative thereto, a portion of the operating member (3 ) projecting from the hollow interior of the body member to enable manual movement of said operating member, a through hole (4) being provided in said operating member for housing resilient means (5) acting axially of said hole (4 ), a clicking thruster (6) mounted in the operating
2-437 GI/2003 274
[PART III-SEC. 2 THE GAZETTE OF INDIA , JANUARY 31 , 2004 ( MAGHA 11 , 1925 )
member at or adjacent one end of said hole, containment means for said clicking thruster (6) being formed at said one end of said hole (4) to retain the clicking thruster (6) in said hole , a moving contact member , (7) located at or adjacent the other end of said hole, said moving contact member being in resilient contact with said clicking thruster (6) through said (resilient means (5 ) , one internal side face of said body member being provided with one or more recesses therein and the opposite internal side face of said body member being provided with a plurality of stationary contacts ( 9 ) spaced therealong in the direction
of movement of the operating member ( 3 ) , the resilient means (5) urging the clicking thruster (6) and the contact member respectively into engagement with the one internal side face of the body inember and the stationary contacts (9 ) on the opposite internal side face of the body member , the arrangement being such that, on movement of the 7 operating member (3 ) to a position in which the contact member thereon is resiliently urged into engagement with , to short between , two adjacent stationary contacts , the clicking thruster is resiliently urged into engagement with an associated recess to produce a clicking sensation on said movement which is transmitted to said projecting portion of the operating member , the body member and operating member therein being retained in an assembled state purely by interaction
therebetween.
Drawings: 17 sheets
Complete Specifications : 27 pages .
275 THE GAZETTE OF INDIA , JANUARY 31 , 2004 (MAGHA 11 , 1925 )
PART III-SEC . 2]
191976 :
155 D
Ind.Cl
Int.Cl'
B 32B 1/04
:
:
A FABRIC STRUCTURE FOR BALLISTIC PROTECTION
Title
Applicant :
E.I DU PONT DE NEMOURS AND COMPANY, OF 1007, MARKET STREET, WILMINGTON , DELAWARE 19898 , UNITED STATES OF AMERICA .
:
CHITRANGAD
Inventor
596 /CAL/ 1997 FILED ON 04.04.1997
Application no.
(CONVENTION NO. 08/636,446 FILED ON 23.4.1996 IN UNITED STATES OF AMERICA.) APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)
PATENT OFFICE KOLKATA.
8 CLAIMS .
A fabric structure for ballistic protection comprising at least two layers of woven para -aramid yarn ofthe kind such as herein described and at least one layer of pulp of the kind of the kind such as herein described positioned therebetween;
Wherein the said pulp is from 5 to 20 weight percent of the said structure based on weight of the said layers of said woven yarn .
Drawings: 1 sheets
Complete Specifications : 12 pages.
276
[PART III-SEC. 2 THE GAZETTE OF INDIA , JANUARY 31 , 2004 ( MAGHA 11 , 1925 )
191977 Ind.Cl :
32(C)
D02G 3/00
Int.Cl'
Title :
A SIZE COMPOSITION FOR TREATING GLASS FIBRES USEFUL TO REINFORCE POLYMERIC MATERIALS .
Applicant :
N.V. OWENS - CORNING S.A. OF 178 CHAUSSEE DE LA HULPE, 1170, BRUSSELS , BELGIUM
Η WILLY PIRET .
Inventor :
808 /CAL/ 1997 FILED ON 05.05.1997
Application no.
(CONVENTION NO. 08/646/606 FILED ON 08.05.1997 IN UNITED STATES OF AMERICA.) APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)
PATENT OFFICE KOLKATA.
22 CLAIMS .
A size composition for treating glass fibers useful to reinforce polymeric materials comprising:
(a) a first film former comprising a polyester-based thermoplastic polyurethane formed from a satured polyester which does not crosslink
(b) a second film former comprising ( i) a vinyl acetate glycidyl methacrylate copolymer or ( ii) a mixture of a vinyl acetateglycidyl methacrylate copolymer and a vinyl acetate homopolymer ;
(c) a silane coupling agent ; and
(d) water.
nil
Complete Specifications : 25 pages .
Drawings:
277 THE GAZETTE OF INDIA, JANUARY 31 , 2004 (MAGHA 11 , 1925)
PART III-SEC. 2]
191976 :
139 A
Ind.Cl
:
C09 C 1/60
Int.Cl7
Title
:
A PROCESS FOR MANUFACTURING DRY GRANULATED POWDERED CARBON BLACK
Applicant :
DEGUSSA AG OF BENNIGSENPLATZ 1 , D -40474 DUSSELDORF
GERMANY
1. DR. CONNY VOGLER KOLBERGER.
Inventor
2. DR . KARL VOGEL AM MITTELBACH .
3. JAN KOPIETZ .
Application no. 1038/CAL/1997 FILED ON 04.06.1997 (CONVENTION NO. 19623198.1 FILED ON 11.06.1996 IN GERMANY .)
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)
PATENT OFFICE KOLKATA.
9 CLAIMS.
A process for manufacturing dry granulated powdered carbon black characterised by granulating powdered carbon black in a toothed shaft granulator which has , in a circular cylindrical, drum -shaped státor with a longitudinal axis an axially arranged toothed shaft which rotates about the longitudinal axis of the stator and conveys the powdered carbon black from the inlet to the exit to of the granulator , with simultaneous granulation, wherein the teeth have a diameter and a length and are arranged on the shaft, axially offset with respect to each other along a helical line around the shaft and the maximum peripheral speed of the ends of the teeth is between 1 and 6 m/s and the average residence time for the carbon black in the granulator is between 20 and 600 seconds .
11
12
15
15
10
16
Pellated coron
Drawings: 3 sheets
CompleteSpecifications : 31 pages.
278
[PART III- SEC . 2 THE GAZETTE OF INDIA, JANUARY 31 , 2004 ( MAGHA 11 , 1925 )
Ind.Cl
:
191979 80( F) , 167 ( C) 198 (C)
Int.Cl' :
B01D 21/02 33/58 В 29 С 047/68
Title :
FILTER APPARATUS FOR LIQUIDS CONTAINING IMPURITIES .
Applicant :
1. HELMUT BACHER OF BRUCK/BAUSLEITEN 17, A-4490 ST . FLORIAN , AUSTRIA .
2. HELMUT H SCHULZ, OF BADSTRASSE 20 , A -4490 ST. FLORIAN, AUSTRIA
3. GEORG WENDELIN OF WALDBOTHENWEG 84, A - 4033 LINZ , AUSTRIA .
Inventor
I. HELMUT BACHER
2. HELMUT H SCHULZ
3. GEORG WENDELIN
1326/CAL/ 1997 FILED ON 14.7.1997
Application no.
(CONVENTION NO. 2132/96 FILED ON 5.12.1996 IN AUSTRIA. )
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)
PATENT OFFICE KOLKATA.
17 CLAIMS.
10
9
Fig.1
6
17
-11
-5
5
11
16
39 48
42
38
1338
50 5242.
15
43
53
40
41
40
43
16
41
-12
-6
6
-6
10
8 279 PART III-SEC . 2]
THE GAZETTE OF INDIA , JANUARY 31 , 2004 ( MAGHA 11 , 1925 )
Filter apparatus for liquids containing impurities , in particular solid particles , comprising a housing ( 1 ) in which at least one stationary , substantially flat filter (5 ) is disposed to which the liquid to be cleaned is supplied in the region of its periphery via at least one supply channel ( 3 ) and from which the cleaned fluid is conducted off the hous ing ( 1 ) via at least one downstream channel (7 ) , atleast one scraper element ( 17 ) , having a scraping edge ( 31 ) that is pressed against the upstream - side surface ( 11 ) of the filter ( 5 ) and is movably connected to a scraper carrier ( 1 ) that is rotatable around an axis disposed substantially perpendicular to the upstream - side surface of the filter ( 5 ) by a drive means ( 15 ) , the scraper element scraping off the impurities adhering to this surface and conveying them towards the center of the filter , wherefrom the impurities are conveyed off the housing ( 1 ) by means of at least one screw ( 38 ) via at least one discharge channel ( 39 ) that starts from the center of the filter ( 5 ) and conducts the impurities out of the housing ( 1 ) characterized in that at least one scraper element ( 17 ) is connected to the scraper carrier ( 12 ) swivellable around an axis ( 18 ) and extends from this axis ( 18 ) in direction of rotation of the scraper carrier ( 12 ) and obliquely to the filter ( 5 ) , the scraping edge ( 31 ) of the scraper element ( 17 ) being pressed against the filter ( 5 ) during revolution of the scraper element ( 17 ) by the counter - pressure of the liquid to be cleaned . a
Complete Specifications : 16 pages .
Drawings: 4 sheets [PART III-SEC . 2 THE GAZETTE OF INDIA , JANUARY 31 , 2004 ( MAGHA 11 , 1925 )
280
191980 151 F
Ind.Cl :
B 31 C 5/00
:
Int.Cl '
Title
PROCESS FOR THE MANUFACTURE OF TUBE BODIES .
Applicant :
AISA AUTOMATION INDUSTRIELLE SA .. OF ROUTE DE, SAVOIE , CH - 1896 , VOUVRY, SWITZERLAND.
:
Inventor
GERHARD KELLER .
Application no. 2,187 /CAL / 1997 FILED ON 20.11.1997 (CONVENTION NO. 98118685.5 FILED ON 21.11.1996 IN GERMANY.)
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)
PATENT OFFICE KOLKATA
9CLAIMS .
Process for the manufacture of tube bodies , in particular multilayered tube bodies (4,b , 14) , comprising atleast one partition extending over the length of said tube bodies and forming mutually adjoining longitudinal chambers (A, B , C , D , E, F, G) , utilising a foil strip ( 1 ), wherein first a partition strip or a partition strip section cut to length , is fixed to the foil strip or foil strip section, cut to length , in an orientation parallel to the foil strip or foil strip section , whereafter the lateral edges are interconnected , in order either to form an endless tube , from which tube bodies can then be cut to length , or to directly form such tube body wherein the partition strip or the partition strip section is manufactured from at least one tube (2 ; 6 ; 9a) or tube section .
8
FIG.2B
E
FIG . 2A
5
5
Б
3
3
FIGAB
17-
16
13
15
13
-H
15-
H
Drawings: 1 sheets
Complete Specifications : 9 pages .
281 THE GAZETTE OF INDIA , JANUARY 31 , 2004 ( MAGHA 11 , 1925)
PART III-SBC.2]
191981 128A
:
Ind.Cl
:
A61L 15/01 , A61L 27/00
Int.Cl'
A PROCESS OF PREPARING A FIBROIN FILM
Title
Applicant :
NATIONAL INSTITUTEOFSERICULTURAL AND ENTOMOLOGICAL SCIENCE , MINISTRY OF AGRICULTURE, FORESTRY AND FISHERIES OF 1-2 OHWASHI, TSUKUBA - SHI IBARAKI - KEN , JAPAN .
KOZO TSUBOUCHI
Inventor :
120/CAL/ 1997 FILED ON 21.01.1997
Application no.
(CONVENTION NO. 8-28559 FILED ON 23.01.1996 IN JAPAN.)
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)
PATENT OFFICE KOLKATA.
6 CLAIMS.
Aprocess of preparing a fibroin film , comprising the steps of:
a) Dissolving a sericin - free fibroin substance in water to obtain an aqueous fibroin solution;
b) Forming the aqueous fibroin solution into a liquid film; and
c) Drying the liquid film while preventing crystallization of fibroin, h thereby obtaining a non- crystalline fibroin film ,
Wherein step (c) is performed under any one of the following conditions (c - 1 ) to (c-3);
(c- 1) under a reduced pressure of 0.5 atm or lower;
(c-2) at a temperature of 0 °C to 50 °C under a relative humidity of 40 to 90% in air or in an inert gas;
and
(c-3 ) while bringing the liquid film into contact with air or inert gas at a temperature of 0°C to 50°C and at a wind velocity of 5 cm per second or higher .
Drawings: NIL
9 pages.
CompleteSpecifications :
3-437GI/2003.
282
[PART III-SEC . 2 THE GAZETTE OF INDIA , JANUARY 31 , 2004 (MAGHA 11 , 1925 )
Ind . Cl .
:
87 C
191982 Int.Cl'
:
A63B59/00
Title
:
SPORTS BAT AND METHOD OF PRODUCING THE SAME .
Applicant :
CADCAM TECHNOLOGY LIMITED, OF 43 ARK WRIGHT STREET NOTTINGHAM NG2 2JR , UNITED KINGDOM
Inventor
1 . RICHARD BROOKS .
2. JAMES STEPHEN BOYD MATHER .
3. STEPHEN KNOWLES .
Application no . 134/CAL/ 97 FILED ON 24.01.1997 (CONVENTION NO.9601361.0 FILED ON 24.01.1996 IN U.K.)
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)
PATENT OFFICE KOLKATA.
10 CLAIMS.
A sports bet having a hitting surface for impact with a ball , wherein ,because of the shape of the hitting surface and the material of the hitting surface , the hitting surface has a selected mode of vibration when in contact with the ball such that the duration of a half cycle of the selected mode of vibration is substantially equal to the contact time between the hitting surface and the ball during an impact.
Complete Specifications : 12 pages .
Drawings: 4 sheets 283 PART III-SEC. 2 ]
THE GAZETTE OF INDIA , JANUARY 31 , 2004 ( MAGHA 11 , 1925 )
:
99A
191983 Ind.Cl
Int.Cl'
A 47J 27/21
:
:
Title
ELECTRIC KETTLE
Applicant :
SEB S.A. OF CHEMIN DU PETIT BOIS , LES 4 M , 69130, ECULLY FRANCE .
:
Inventor
PATRICK DELIENS .
Application no. 792/CAL/ 1997 FILED ON 02.05.1997 (CONVENTION NO. 96 05987 FILED ON 14.05.1996 IN FRANCE.)
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)
PATENT OFFICE KOLKATA.
9 CLAIMS .
Electric kettle comprising:
a plastics material tank ( 1 ) for liquid to be heated, said tank having side walls (7) which are provided with shoulder means (8 , 9) in their lower ends,
heating means (2) comprising at least one electrical element (3 ) associated with a metal heater plate (4) which has a top face (4a) adapted to be in direct contact with the liquid to be heated and a peripheral rim (4c, 4d) adapted to be supported by said shoulder means (8, 9) ,
a seal ( 10) disposed between said side walls (7 ) and said peripheral rim (4c,4d) , and a removable bottom ( 11 ) adapted to be attached to said tank ( 1) by fixing means ( 13 , 14, 15),
wherein said removable bottom ( 11 ) comprises a skirt (12) which is adapted to surround said side walls (7) and said fixing means are adapted to attach said skirt ( 12) to said side walls (7), in order to have a counter - locking effect to hold in place said heater plate (4) on said shoulder means (8 , 9) .
17
10
4d .
4b
4b
40
8
13
4c
4C
13
14
14
12
12
2
11
FIG.2
M
Drawings : 2 sheets
Complete Specifications : 10 pages .
284
THE GAZETTE OF INDIA , JANUARY 31 , 2004 (MAGHA 11 , 1925)
[PART III-SEC . 2 Ind.Cl
:
187 C
191984
Int.Cl
:
H04B - 5/04
Title
:
A MESSAGE TRANSMISSION SYSTEM
Applicant :
KONINKLIJKE PHILIPS ELECTRONICS N.V. OF GROENE WOUDSEWEG 1 , 5621 BA EINDHOVEN, THE NETHERLAND Inventor :
RODNEY WILLIAM GIBSON DAVID JOSEPH SMITH
Application no . 946/CAL/ 1997 FILED ON 26.05.1997 (CONVENTION NO. 9611146.3 FILED ON 29.05.1996 IN BRITAIN)
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)
PATENT OFFICE KOLKATA .
9 CLAIMS .
Amessage transmission system comprising at least one primary station (10, 14, 16) that transmits on a dow - link and a plurality of secondary stations ( 18 , 20 ) that transmit on an up- link, wherein the primary station comprises means ( 14) for compiling messages to be transmitted, means ( 16) for transmitting the messages to the secondary stations , means ( 14 , 16 ) for transmitting a signal inviting the secondary stations to transmit responses to the messages , means (22, 14, 24, 44) for receiving and analysing the responses, means (24 ) for acknowledging receipt of responses which were analysed successfully, means (40 , 24) for determining which of the transmitted messages have been responded to and for repeating the invitation to invite the secondary stations whose responses have not been acknowledged to transmit/ re - transmit their responses , and wherein each of the secondary stations comprises means (68) for receiving the messages , means (70, 72 ) for determining if anyone of the messages is addressed to it, means (68) for receiving the invitation signal , means (72, 90) for transmitting a response to the anyone of the messages addressed to it, and means (72) responsive to not receiving an acknowledgement of its response for repeating the transmission of the response when invited to do so .
1/4
16
10
18-
12
PNC
PAC
Tx
16
Tx
16
20-
-22
FIC
Complete Specifications : 15 pages.
Drawings : 4 sheets 285 THE GAZETTE OF INDIA, JANUARY 31 , 2004 (MAGHA 11, 1925)
PART III-SEC . 2]
191985 63 A 3/63 I
Ind.Cl
F02C- 3/28 102K7/ 14
Int.Cl
Title
A SYSTEM FOR GENERATING ELECTRICAL POWER BY UTILIZING THE TORQUE POWER GENERATED BY THE MOVEMENT AND STRENGTH OF DOMESTIC ANIMALS.
Applicant :
RAMESH PRASAD SHRIVASTAVA, OF DIWAN ROAD, MUZAFFARPUR BIHAR 842 001 , INDIAN
RAMESH PRASAD
Inventor
1111 /CAL/ 1997 FILED ON 12.6.1997
Application no.
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)
PATENT OFFICE KOLKATA.
7 CLAIMS.
A system (200 ) for generating electric power from non conventional energy input comprising a plurality of identical machine devices (M1 M2 M3 M4) arranged at different heights ; and a generator set (39), each said machine devices comprises:
→ a torque power machine (SO) where the initial torque power is generated by animal power resulting from the movement and strength of domestic animals;
→ a speed gear machine ( 100) receiving the torque power from said torque power machine (SO) via a prime mover ( 14) disposed at a central point of said torque power machine (SO) for boosting up the initial speed of the prime mover wheel (14) . ,
→ said generator set (39 ) installed vertically with its armature shaft projecting downwards being inserted and embedded into a plurality of free wheel gear bearings (33,34,35,36) at different heights in accordance with disposition of said machine devices (Ml M2 M3 M4) and capable of rotating freely by said free wheel gear bearings (33,34,35,36 ) working together or independently, characterised in that said speed gear machine ( 100) is an arrangement of a main gear wheel (20) and a plurality of 286
[PART III-SEC . 2 THE GAZETTE OF INDIA , JANUARY 31 , 2004 (MAGHA 11 , 1925)
double gear pulleys (25,26,27,28 ) having different diameter ratio to boost the speed of said main gear wheel (20) in such a way that one rotation of the prime mover wheel ( 14) produces 1620 times rotation of said free wheel gear bearings (33,34,35,36) and in that said free wheel gear bearings (33,34,35,36 ) are connected to said double geared pulleys of each speed gear machine such that the speed generated by each set of double geared pulleys is transmitted to a corresponding free wheel gear bearing rotating the armature shaft (37) at a corresponding speed to generate electrical power
M1
-38
39
35
Fig.7A
37
32
31
30
26
67
100
24
M2
20
22
Complete Specifications : 14 pages.
Drawings: 5 sheets 287 PART III-SEC . 2 ]
THE GAZETTE OF INDIA , JANUARY 31 , 2004 ( MAGHA 11 , 1925 )
191986 137 A
:
Ind.Cl
:
G10C 3/06
Int.Cl'
MUSICAL INTERSCRIPTOR
Title
:
Applicant :
SRI RAJIB KUMAR BANDOPADHYAY OF 15 /C CHAKRABORTY PARA A-ROAD , IST LANE , P.O NONACHANDANPUKUR, BARRACKPORE KOLKATA PIN - 7000122, INDIA .
:
SRI RAJIB KUMAR BANDOPADHYAY
Inventor
1345 /CAL/ 1997 FILED ON16.07.1997
Application no.
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)
PATENT OFFICE KOLKATA.
2 CLAIMS.
A musical Interscriptor comprising of a Body -member (FIGURE 4 & 5) , a Transparent-member (FIGURE 2 & 3 ) and a Sliding- member (FIGURE 1 ) to help in transposition, preparing Scale- independent musical Stave - notation , and also in ascertaining the most common chords to accompany a song written and performed in a particular scale enrich it musically, in which the " Transparent- member " ( FIGURE 2 & 3 ) is to be rigidly attached to the " Body- member " (FIGURE 4 & 5) to form a "Complete Body-member " ( FIGURE 7), creating a window for taking readings and in which the " Sliding . member " (FIGURE 1 ) slides into the " Complete Body -member " (FIGURE 7 ); and moved "to and fro " inside it, for matching its gradations and musical notes written in scale -dependent notation, with the gradations , chords , and musical notes written in scale - independent notation of the "Transparent -member " (FIGURE 2 & 3 ) attached to the " Body- member " (FIGURE 4 & 5 ) -now forming a window of the " Complete Body-member " ( FIGUR 7) -and after matching of the gradations, according to pre- determined scale of a particular song , readings can be taken .
Drawings: 4 sheets
Complete Specifications : 7 pages.
288
THE GAZETTE OF INDIA, JANUARY 31 , 2004 (MAGHA 11 , 1925 )
[PART III-SEC. 2 Ind.Cl
:
64 B
191987 Int.Cl
:
G06F - 12/02 G11C - 7/00
Title
:
A SEMICONDUCTOR CIRCUIT
Applicant :
SIMENS AKTIENGESELLSCHAFT OF WITTELSBACHERPLATZ 2, 80333 MUNCHEN GERMANY
Inventor
:
1. ANGELA ZELLNER .
2. ANDREAS RAESCHMEIER.
3. WOLFGANG POCKRANDT
Application no. 1358/CAL/ 1997 FILED ON 21/06/1997 (CONVENTION NO.19634135.3 FILED ON 23.08.1996 IN GERMANY)
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)
PATENT OFFICE KOLKATA.
6 CLAIMS .
A semiconductor circuit comprising:
At least one operation assembly with a drive circuit and a data memory;
At least one initialization assembly for testing and for initializing said at least one operational assembly
At least one connecting line of disconnectable type, characterized in that
At least one potential line (2,3 ) connected to said atleast one operational assembly provided in the region of said at least one connecting line ( 1 ) , and in that said at least one operational assembly can be placed in an inactive state . if at least one of said potential line (2,3 ) is connected to said at least one connecting. line .
2.
Complete Specifications : 10 pages.
Drawings: 2 sheets PART III-SBC. 2]
289 THE GAZETTE OF INDIA, JANUARY 31 , 2004 ( MAGHA 11 , 1925)
Ind.CI
:
206 E 64 B
191988 Int.Cl'
:
G06K - 19/00 , G07F - 7/10
:
Title
MICROPROCESSOR, IN PARTICULAR FOR USE IN A CHIP CARD , WITH A CONTROL UNIT AND WITH A HOUSING SURROUNDING THE CONTROL UNIT .
Applicant :
SIMENS AKTIENGESELLSCHAFT OF WITTELSBACHERPLATZ 2, 80333 MUNCHEN GERMANY
Inventor
:
1. MICHAEL HUBER .
2. PETER STAMPKA .
3. JOSEF HEITZER
Applicationno. 1391 / CAL/ 1997 FILED ON 24.07.1997 (CONVENTION NO. 19634133.7 FILED ON 23.8.1996 IN GERMANY.) APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)
PATENT OFFICE KOLKATA .
7.CLAIMS.
Microprocessor, in particular for use in a chip card, with a control unit and with a housing surrounding the control unit, at least one sensor (5) which is connected to the control unit (3 ) being provided in the region of the housing (6) , at least one substance which can be perceived by the sensor being provided in the region of the housing (6) , characterized in that the substance has at least two components , at least one of the components being present in a predefined concentration which can be displayed by the sensor (5) , the microprocessor ( 1 ) being designed in such a way that a measurement signal which is fed to it by the sensor and which displays the predefined concentration can be permanently stored, and the control unit (3 ) being designed in such a way that it goes into an inactive state or can be placed in an inactive state by the sensor if the sensor (5) generates a measurement signal which displays a concentration which differs from the predefined concentration.
2
3
CPU
6
CompleteSpecifications :12
Drawings: 1 sheets
pages.
4-437 GI/2003 [PART III-SEC. 2 290
THE GAZETTE OF INDIA, JANUARY 31 , 2004 (MAGHA 11 , 1925 )
191989 Ind.Cl :
25B
Int.Cl'
:
C04B35/622
:
Title
AN IMPROVED PROCESS FOR PRODUCING HIGH ALUMINA REFRACTORY BLOCKS .
STEEL AUTHORITY OF INDIA LIMITED , OF ISPAT BHAWAN, LODI Applicant : ROAD
NEW DELHI - 110004, INDIA .
Inventor :
1. ANUP KUMAR BHATTACHARYA .
2. AJOY KUMAR DASGUPTA .
3. TAPAS KUMAR PAL .
4.
PURIMETLA CHINTAIAH
2215 /CAL/ 1997 FILED ON 25.11.1997
Application no.
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)
PATENT OFFICE KOLKATA .
2 CLAIMS .
An improved process ' for producing high alumina refractory blocks, comprising:
(a) preparing a mix of pre -selected ingredients in a conventional mixer ;
( b ) making the mix pasty with addition of water and molasses thereto in required quantity;
(c) . preparing blocks of the pasty mix manually; (d) drying the blocks in natural air;
(e) firing/ sintering the blocks in a furnace for 24 hours;
(f) cooling the blocks to ambient temperature in natural air;
characterised in that ( i ) the ingredients of the mix comprise flyash which is beneficiated by burning in a furnace at 10000C
for 3-5 hours , cooling to ambient temperature in natural air , treating with N/ 10 Hcl acid at a flyash - t6 - acid ratio by weight of 5 : 1 followed by treatment with alkaline (standard) ammonium molybdate solution to remove the phosphorus pentoxide present in the flyash, washing with water, drying and passing through a magnetic field, together with microfine technical grade alumina containing graded Kyanite or Bauxite in quantity required to make
the alumina content of the mixture be 50% by weight ; and ( 11 ) the blocks are fired/sintered at 1500°C.
Drawings: I sheets
Complete Specifications : 7 pages .
291 THE GAZETTE OF INDIA , JANUARY 31 , 2004 ( MAGHA 11 , 1925)
PART III SBC . 2]
191990 :
Ind.Cl
74, 34 (A)
D02G3/00
:
Int.Cl'
A MAT FOR USE AS A REINFORCEMENT INA COMPOSITE PRODUCT :
Title
Applicant :
OWENS CORNING, OF ONE OWENS CORNING PARKWAY, TOLEDO, OHIO 43659, UNITED STATES OF AMERICA .
1. SHERI LYNETTE . (EIKLEBERRY) WHISLER .
Inventor :
2. FRANK JOSEPH . MACDONALD .
3. MARGARET MARY WOODSIDE .
1679/CAL/ 1997 FILED ON 12.9.1997
Application no.
(CONVENTION NO. 08/713,318, IN UNITED STATES OF AMERICA .)
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)
PATENT OFFICE KOLKATA.
13 CLAIMS.
Amat for use as a reinforcement in a composite product comprising:
Aplurality of composite stands each including reinforcing fibers and first polymeric material such as herein described ; and Second polymeric material , wherein first portions of said strands are angularly positioned relative to second position of said strands and are joined to said second portions via said second polymeric material.
-144b
1320-
142
140
42b
Drawings: 9 sheets
CompleteSpecifications : 15 pages.
292
THE GAZETTE OF INDIA, JANUARY 31 , 2004 (MAGHA 11 , 1925)
[PART.III-SEC. 2
OPPOSITION PROCEEDING (U/S.25)
An opposition has been entered by M /s . L. S. Davar & Co. , Kolkata on behalf of M/s . Bajaj Auto Limited, Pune, Maharashtra to the grant of a Patent on application No. 190157 ( 1156/Del/ 94 ) dated 19.09.1994 made by M/s . Honda Giken Kogyo Kabushiki Kaisha, Japan .
An opposition has been entered by M / s . L. S. Davar & Co. , Kolkata on behalf of M/s . Bajaj Auto Limited, Pune , Maharashtra to the grant of a Patent on application No. 190158 ( 1157/Del/94) dated 19.09.1994 made by M/s . Honda Giken Kogyo Kabushiki Kaisha , Japan .
An opposition has been entered by M/s . S. Majumdar & Co. , Kolkata on behalf of M/s . Hindustan Lever Limited , Mumbai , Maharashtra to the grant of a Patent on application No. 190169 (1588/Del/94) dated 08.12.1994 made by M/s . Procter & Gamble Company, U.S.A.
Anopposition has been entered by M/s . L. S. Davar & Co. , Kolkata on behalf of M/s . Bajaj Auto Limited, Pune, Maharashtra to the grant of a Patent on application No. 190182 ( 377 /Del/ 95) dated 07.03.1995 made byM/s. Honda Giken Kogyo Kabushiki Kaisha, Japan .
Anopposition has been enteredby M/s . ACRYSIL LIMITED , MUMBAI to the grant of a Patent on application No. 190214 (1482/Cal/96 ) dated 20.08.1996 madeby M /s . SCHOCK & Co., GmbH . ,GERMANY.
An opposition has been entered by M/s . L. S. Davar & Co. , Kolkata on behalf of M/s . Bajaj Auto Limited, Pune, Maharashtra to the grant of a Patent on application No. 190249 ( 1586/Del/94) dated 07.12.1994 made by Ms. Honda Giken Kogyo Kabushiki Kaisha, Japan .
An opposition has been entered by M/ s . L. S. Davar & Co. , Kolkata on behalf of M/s . Bajaj Auto Limited , Pune, Maharashtra to the grant of a Patent on application No. 190251 ( 1633 /Del/94) dated 16.12.1994 made by M/ s . Honda Giken Kogyo Kabushiki Kaisha, Japan.
NEW DELHI 01-06-2003 ΤΟ 30-07-2003
RENEWAL FEES PAID
185564 185565 185741 185765 185766 185767 185768 185769 185770 186134 186135 186252 186255 186295 186339 186425 186426 186427 186431 186522 187077 187011 187320 187350
186762 187317 187318 187228 187319 175527 188171 187073 186826 186719 186727 186728 186799 186830 186989 187313 187885 187915 187947 187954 188181 188188 187881 187959 188174 188179 185706 185231 185209 187907 187031 186423 184291 185992 186793 186141 175237 179797 185177 185148 185269 187291 187349 187408 187444 187527 188000 188037 181875 181874 181876 169949 180062 185373 185129 185567 172542 173089 174341 175172 175182 175459 175460 184423 184693 184877 186319 187406 186907 186988 186710-185385 184648 185275 185379 187235 174343 175602 183660 184649 184897 185326 172767 174002 174841 174937 175028 175029 175185 175522 175745 176278 173090 185562 187450 187520 188004 188043 188177 188180 188189 186792 183655 186333 185613 185703 180406 170654 176691 186761 183930 187298 186424 176023 176404 176426 176531. 177715 180063 184762 185174 184875 188041 188173 175126 186840 174932 186533 186801 186828 186450 184407 186909 186452 186971 186139 178987 187516-186534 186046 187171 180557 184905 186871 188267 188263 188264 176139 184572 185376 185561 187904 187399-187423 187424 188038 188172 188183 176250 177459 180891 184491 184874 177057 184558 184980 185179 185276 187407 186036 186872 187013 187081 187325 186113 180309 186300 186795 175157 175184 185568175848 178471 1757 : 9 176138 177060 177742 176274 177933 177991 177992 177993 178149 184977 184300 175240 187950 187083 187886 186244 186734 187292 187360 178150 178176 178375 180193 180560 180562 180565 182524 182609 182632 177915 185276 185195 184727 184831 185578 185742 185743 186116 186146 186155 186156 186217 182634 183433 183623 184097 184103 184162 184236 184561 184563 184725 183432 185580 180892 184825 185386 186214 186993 187172 187993 188002 188258 188338 187079 186556 186822 185994 176144 183621 178938 184723 185141 186435 175230 174183 176070 176141 176522 184879 184490 185707 186436 187419 178616 179535 179798 179800 179956 179957 180187 182403 PART III- SEC . 2]
THE GAZETTE OF INDIA, JANUARY 31 , 2004 (MAGHA 11 , 1925)
182405 175209 175714 177443 177871 178382
187015 187411 187519 177730 177746 187174
176722 187957 176140 176466 178232 185587
298
177964 177999 178373 178476 178596 186875
177874 184287 186523 177914 186765 185233
178837 180195 180196 180563 182183 182544 184852 185367 186875 187921 188265 188340 187902 188262 188372
176881 177195
188371 184106 184107 184288 184414 185563
188333 174637 186088 176153 178691 180175
178239
184746 184747 184855 185234 185566 184740
185746 185958 188339 185960182404 178591 .
185745
188374
184494 184729 184836 185192 185271 185487 180174 182912 184239 1183317 184597
185488 185522 185585 185592 185646 185744
PATENTS SEALED ON 02-01-2004 ( KOLKATA)
190134 190135 190136 190137 190138 190139
190131
190198 .
KOL- 13 .
PATENTS SEALED ON 24-12-2003 (MUMBAI BRANCH )
187163 189771 189797 189803 189811 189824
176116
189994 189876 189883 189991 189992 189874
190010
190052
190051
190053 190054 190009
190140 190192 190193 190195 190196 189829 189836 189837 189872 189873
190005 190007
189998 190000 190002 190004
190057 190063 190065 190067
190055 190056
190424′190452
190071 190073 190078 190296 190398 190069
190474 190483.
PATENTS SEALED ON 31-12-2003 ( CHENNAI)
188986 188987 188988 188989 189183 188982
5437GI/2003
189186 189188 189189 189,90 294
THE GAZETTE OF INDIA , JANUARY 31 , 2004 ( MAGHA 11 , 1925)
[PART III-SEC. 2
REGISTRATION OF DESIGNS
The following designs have been registered . They are open for public inspection from the date of registration . ( Colour combination if any, is not shown in the representation)
The dates shown in the following each entry is the date of registration.
05-05
Class
No.192089 . GOLDTEX FURNISHING INDUSTRIES , 78/1197 , TRI NAGAR, DELHI- 110035 , INDIA, AN INDIAN PARTNERSHIP FIRM . " TEXTILE FABRIC" 9th May 2003
Class
23-02 No.192007 . FRIEDRICH GROHE AG & CO . KG., OF AN DER EGGE 19 , D-58636 ISERLOHN , GERMANY. " SHOWER " 15th Nov. 2002 (Reciprocity, Germany)
Class
09-01 No.192131 . THERMO PLAST INDUSTRIES PVT . LTD. ,, 113/114 , VIVEK IND. ESTATE , NEAR LITOLIER, USWALA ROAD , CAMA ESTATE, GOREGAON (E) , MUMBAI ; -400 063, MAHARASHTRA , INDIA, " WATER BOTTLE " 20th May 2003.
Class
23-02 No.192010. FRIEDRICH GROHE AG & CO. KG . , OF AN DER EGGE 19 , D- 58636 ISERLOHN, GERMANY. " SHOWER RAIL" 15th Nov. 2002 (Reciprocity , Germany) 295 PART III-SBC . 2]
THE GAZETTE OF INDIA, JANUARY 31 , 2004 (MAGHA 11 , 1925 )
Class
02-04 No.192047 . M/S . TRELA FOOTWEAR EXPORTS PVT. LTD., OF ADDRESS D-38 , SITE- C, INDUSTRIAL AREA, SIKANDRA, AGRA: -282 007, U.P., (INDIA). " SOLE FOR FOOTWEAR " 6th May2003.
12-16
Class
No.192217 . ROOTS AUTO PRODUCTS PVT . LTD . OF PKG INDUSTRIAL ESTATE, GANAPATHY P.O. COIMBATORE -641006, TAMIL NADU , INDIA. " TRUMPETS FOR VEHICLE " 27th May 2003.
Class
09-09 No.192430. CO-OP. PRINCE PLASTICS INTERNATIONAL PVT. LTD. , AT 51 (3) MAROL M.V. INDL. ESTATE, ROAD ,ANDHERI (E) ,MUMBAI: -400 059 ,MAHARASHTRA, INDIA. " DUST BIN " 24th June 2003 .
Class
14-01 No.192289. BOSE CORPORATION , A DELAWARE MOUNTAIN , MASSACHUSETTS CORPORATION OF THE FRAMINGHAM, 01701-9168, U.S.A. "HEADSET" 20th Dec. 2002 (Reciprocity, U.S. ).
Class 12-11 No.192245 . SHIROUMA SAIENSU KABUSHIKI KAISHA, OF BUSINESS AT NO.5777, AOKI, NYUZEN - CHO SHIMONIKAWA -GUN , TOYAMA 939-0643 , JAPAN . " CYCLE " 3rd December 2002 ( Reciprocity , Japan) .
296
THE GAZETTE OF INDIA , JANUARY 31 , 2004 ( MAGHA 11 , 1925 )
[PART III-SBC. 2 13-99
Class
No.192116. LARSEN & TOUBRO LIMITED, L & T HOUSE , BALLARD ESTATE, MUMBAI : -400 001 , MAHARASHTRA , INDIA, " DOOR INTERLOCK ASSEMBLY DOOR " May2003
23-01
Class
No.192645. DEVI POLYMERS PVT . LTD . OF T.N.K. HOUSE , 48 ANNA SALAL, CHENNAI 600002 , TAMIL NADU , INDIA. " SIDE PANEL OF WATER " 23rd July 2003.
Class
13-99 No.192081 . LARSEN & TOUBRO LIMITED , L & T HOUSE , BALLARD ESTATE, MUMBAI : -400 001, MAHARASHTRA, INDIA, "DOOR INTERLOCK -ASSEMBLY-CIRCUIT BREAKER " 9th May 2003
Class
19-06 No.192512 . LINC PEN & PLASTICS LTD., AT 3, ALIPORE ROAD , 1ST FLOOR, KOLKATA: -700 027, INDIA, " PEN" 3rd July 2003
Class
23-01 No.192646 . DEVI POLYMERS PVT . LTD. OF T.N.K. HOUSE, 48 ANNA SALAL, CHENNAI- 600002 , TAMIL NADU , INDIA. PANEL OF WATER" 23rd July 2003. " BOTTOM 297 THE GAZETTE OF INDIA, JANUARY 31 , 2004 ( MAGHA 11, 1925)
PART III-SBC . 2]
23-02
Class
No. 19229 % HANSGROHE AG, AURSTR. 5-9, B 7776L SCHILTACH, GERMANY, A GERMAN COMPANY, "WALL BOD FOR HAND" 13" Dec. 2002 (Raciprocity, Germany)
Clas
No. 192321.. HANSGROHE AG , AUESTR. 59, D 77761 SCHILTACH, GERMANY, A GERMAN COMPANY. "WALL ROD FOR HAND" 12th Dec. 2002-(Reciprocity, Germany)
Class 25-02 No.192092.. FRIEDRICH GROHE AG & CO. KG, OF AN DER EGGE 19, D-58636 RLOWN , GERMANY. "WASH BASIN MIXER" 15th Nov. 2002 (Reciprocity, Germany) KLOTITSI
23-02
Class
No.192091 . FRIEDRICH GROHE AG & CO. KG., OF AN DER EGGE 19 , D-58636 ISERLOHN, GERMANY. " SPOUT BODY" 15th Nov. 2002 (Reciprocity, Germany)
28-99
Class
No.192057 . GLAXO GROUP LIMITED, GLAXO WELLCOME HOUSE, BARKELEY AVENUE , GREENFORD, MIDDLESEX, UB6 ONN, U.K. , A BRITISH COMPANY. " HOUSING FOR MEDICAMENT DISPENSER" 7th Nov. 2002 (Reciprocity, Great Britain) 298
THE GAZETTE OF INDIA , JANUARY 31 , 2004 (MAGHA 11 , 1925)
[PART III-SEC. 2 Class
02-07
No.192507 . OSCAR METAL CRAFT (P) LTD. , VILLAGEKOT SEKHON, 289, MILESTONE, G.T. ROAD , DORAHA - 141421 , DISTT. LUDHIAΝΑ, (PUNJAB) , INDIA , AN INDIAN PVT . LTD . COMPANY, " PANT HOOK" 3rd July 2003.
Class
08-01 No.192178. LILABHAI BHAICHUNDBHAI PATEL , HAVING ADDRESS AT NO , 47- YASHVIJAY SOCIETY , N.H. 8 , NEAR BHARVI TOWER , C.Т.М. AHMEDABAD: -380 026, GUJARAT , INDIA . " HAND TOOL FOR PLUCKING MANGO " 23rd May 2003.
05-05
Class
No.192601 . THE RISHABH VELVELEEN LIMITED , AN INDIAN COMPANY AT 9TH KM, HARDWAR- DELHI ROAD , NEAR RANIPUR TOLL BARRIER, JWALAPUR, HARDWAR: - 249 407 , U.P. , INDIA. " TEXTILE FABRICS" 15th July2003
Class
12-11 No.192246. SHIROUMA SAIENSU KABUSHIKI KAISHA , OF ESS AT NO.5777, AOKI , NYUZEN- CHO SHIMONIIKAWA - GUN, TOYAMA 939- 0643 , JAPAN . " CYCLES" 17th March 2003 (Reciprocity Japan)
Class
28-03 No.192731 . KRISHNA PAL SINGH OF RGM NO . 1 , GP - A/ 1-7 ,M LICHUBAGAN , JYANGRA, KOLKATA- 700059 , WEST BENGAL, INDIA. "APPLICATOR " 4th August 2003 PART III-SBC. 2 ]
299 THE GAZETTE OF INDIA, JANUARY 31 , 2004 (MAGHA 11 , 1925)
Class
02-04 No.192226 . M/S . TRELA FOOTWEAR EXPORTS PVT. LTD. , OF ADDRESS D- 38, SITE- C,INDUSTRIAL AREA , SIKANDRA, AGRA: -282 007, U.P., (INDIA). " SOLE FOR FOOTWEAR " 28 May2003
Class
07-02 No.192083 . INDIA INTERNATIONAL, OF G- 1/37 , G.T. KARNAL ROAD , INDUSTRIAL AREA, AZADPUR, DELHI - 110033 , INDIA . " PRESSURE COOKER" 9th may 2003.
Class
07-02 No.192084 . INDIA INTERNATIONAL, OFG- 1/37 , G.T. KARNAL ROAD , INDUSTRIAL AREA, AZADPUR, DELHI - 110033, INDIA. " PRESSURE COOKER" 9th may 2003.
11-01
Class
No.192255 . AUSTRALIA DIAMONDS LIMITED , AN ISRAELI COMPANY, DIAMONDS EXCHANGE, MACABI BLDG . , 20 FL. , ROOM 40 , 1 JABOTINSKI ST. , RAMAT GAN, ISRAEL. "DIAMOND " 2nd June 2003.
Class
19-06 No.192219 . FLAIR PENS AND PLASTIC INDUSTRIES , AN INDIAN PARTNERSHIP FIRM OF 30- A, DEVEN INDUSTRIAL ESTATE , I.B. PATEL ROAD , GOREGAON (E) , MUMBAI -400 063, MAHARASHTRA, INDIA. " PEN" 27th May 2003 300
[PART III-SBC. 2 THE GAZETTE OF INDIA , JANUARY 31 , 2004 ( MAGHA 11 , 1925)
Class
11-01 No.192256 . AUSTRALIA DIAMONDS LIMITED , AN ISRAELI COMPANY, DIAMONDS EXCHANGE , MACABI BLDG. , 20 FL. , ROOM 40, 1 JABOTINSKI ST. , RAMAT GAN, ISRAEL. " DIAMOND " 2nd June 2003
Class
23-02 No.192322 . HANSGROHE AG , AUESTR. 5-9, D- 77761 SCHILTACH, GERMANY, A GERMAN COMPANY. " HEAD SHOWER " 12th Dec. 2002 (Reciprocity Germany)
Class
19-06 No.192488 . LUXOR INTERNATIONAL PVT . LTD . , OF 229 , OKHLA INDUSTRIAL ESTATE- III , NEW DELHI - 110020. INDIA. ALL PEN" 1" July 2003 .
Dr. S. N. MAITY
Controller General of Patents , Designs & Trade Marks .
प्रबन्धक , भारत सरकार मुद्रणालय , फरीदाबाद द्वारा मुद्रित एवं प्रकाशन नियंत्रक , दिल्ली द्वारा प्रकाशित , 2004
PRINTED BY THE MANAGER, GOVERNMENT OF INDIA PRESS, FARIDABAD AND PUBLISHED BY THE CONTROLLER OF PUBLICATIONS , DELHI , 2004