This Gazette may contains Multiple Subjects

रजिस्ट्री सं. डीएल( एन ) -04/0007/2003-05

REGISTERED No. DL(N)-04/0007/2003-05 भारत की राजपत्र The Gazette of India

साप्ताहिक/WEEKLY

प्राधिकार से प्रकाशित

PUBLISHED BY AUTHORITY

नई दिल्ली, फरवरी 7 फरवरी 13, 2004 ( माघ 18, 1925 )

सं० 6]

NEW DELHI, SATURDAY, FEBRUARY 7 -FEBRUARY 13 , 2004 (MAGHA 18, 1925)

No. 6]

इस भाग में भिन्न पृष्ठ संख्या दी जाती है जिससे कि यह अलग संकलन के रूप में रखा जा सके । (Separate paging is given to this Part in order that it may be filed as a separate compilation)

भाग III-खण्ड 2

[PART III-SECTION 2 ]

[पेटेन्ट कार्यालय द्वारा जारी की गई पेटेन्टों और डिजाइनों से सम्बन्धित अधिसूचनाएं और नोटिस [Notifications and Notices Issued by the Patent Office relating to Patents and Designs] THE PATENT OFFICE

PATENTS AND DESIGNS

Kolkata, the 7th February 2004

ADDRESSES AND JURISDICTION OF THE OFFICES OF THE PATENTS OFFICE

The Patent Office has its Head Office at Kolkata and Branch Offices at Mumbai , Delhi and Chennai having Territorial Jurisdiction on a Zonal basis as shown below:-

1. Patent Office Branch , Todi Estates , IIIrd Floor, SunMill Compound, Lower Parel (West ) , Mumbai-400013 .

The States of Gujarat, Maharashtra, Madhya Pradesh and Goa and the Union Territories of Daman and Diu & Dadra and Nagar Haveli .

Telegraphic Address " PATOFFICE" Phone Nos . (022) 2492 4058, 2496 1370, 2492 3684, 24903852

FaxNos . (022) 2495 0622, 2490 3852

E-mail: [email protected]

1-447GI/2003

2. Patent Office Branch , W-5, West Patel Nagar, New Delhi- 110008 .

The States of Haryana, Himachal Pradesh , Jammu and Kashmir, Punjab, Rajasthan , Uttar Pradesh and Delhi and the Union Territory of Chandigarh .

Telegraphic Address " PATENTOFIC" Phone Nos . (011) 2587 1255, 25871256, 2587 1257 , 2587 1258 . FaxNo. (011 ) 2587 1256 . E-mail: [email protected]

3. Patent Office Branch , GunaComplex, 6th Floor, Annex - II, 443,Annasalai , Teynampet, Chennai -600018 .

The States ofAndhra Pradesh , Karnataka, Kerala, Tamil Nadu and Pondicherry and the Union Territories of Laccadive, Minicoy and Aminidivi Islands .

(301) 302

THE GAZETTE OF INDIA, FEBRUARY 7, 2004 (MAGHA 18, 1925)

[PART III-SEC . 2 Telegraphic Address " PATENTOFFIC"

FaxNos. (033) 2247 3851, 2240 1353 .

PhoneNos . (044) 2431 4324/4325/4326.

E-mail . patentin @ vsnl.com

FaxNos.(044) 24314750/4751 .

patindia@ giasc101.vsnl.net.in

E-mail . patentchennai @vsnl. nei

Website: http: /Ipindia.nic.in

All applications, notices, statements or other documents or any fees requiredby the Patents Act, 1970 and the Patents (Amendment)Act, 2002 or by the Patents Rules, 2003 will be received only at the appropriate offices of the Patent Office.

4. Patent Office (HeadOffice), Nizam Palace, 2nd M.S.O. Building, 5th , 6th & 7th Floor, 234/4 , Acharya Jagadish Bose Road, Kolkata-700 020. Restof India.

Telegraphic Address " PATENTS " Phone Nos .(033) 2247 4401/4402/4403 .

Fees: The fees may either be paid in cash or may be sent by Bank Draft or Cheques payable to the Controller of Patents drawn on a scheduled Bank at the place where the appropriate office is situated.

पेटेंटकार्यालय

एकस्व तथा अभिकल्प कोलकाता , दिनांक 7 फरवरी 2004

3. पेटेंट कार्यालय शाखा, गुना कम्प्लेक्स, छठा तल, एनेक्स II , 443, अन्नासलाई, तेनामपेट, चेन्नई - 600 018 ।

पेटेंटकार्यालय के कार्यालयों के पते एवं क्षेत्राधिकार

पेटेंट कार्यालय का प्रधान कार्यालय कोलकाता में अवस्थित है तथा मुम्बई, दिल्ली एवं चेन्नई में इसके शाखा कार्यालय हैं, जिनके प्रादेशिक क्षेत्राधिकार जोन के आधार पर निम्न रूप में प्रदर्शित हैं:--

आन्ध्र प्रदेश, कर्नाटक, केरल, तमिलनाडु तथा पाण्डिचेरी राज्य क्षेत्र एवं संघ शासित क्षेत्र लक्षद्वीप, मिनिकाय तथा एमिनिदिवि द्वीप । तार पता " पेटेंटोफिस " फोन: (044) 2431 4324/4325/4326. फैक्स: (044) 2431 4750/4751. ई. मेल: [email protected]

1. पेटेंट कार्यालय शाखा, टोडी इस्टेट, तीसरा तल, सन मिल कम्पाउंड, लोअर परेल ( वेस्ट), गुम्बई - 400 013 ।

गुजरात, महाराष्ट्र, मध्य प्रदेश तथा गोआ राज्य क्षेत्र एवं संघ शासित क्षेत्र, दमन तथा दीव एवं दादर और नगर हवेली ।

4. पेटेंट कार्यालय ( प्रधान कार्यालय ) , निजाम पैलेस, द्वितीय बहुतलीय कार्यालय भवन, 5वां, 6ठ्ठा व 7वां तल, 234/4, आचार्य जगदीश बोस मार्ग, कोलकाता - 700 0201

तार पता : " पेटोफिस"

भारत का अवशेष क्षेत्र ।

फोन: (022) 24924058 , 2496 1370, 2492 3684, 2490 3852

फैक्स: (022) 2495 0622, 2490 3852

ई. मेल: [email protected]

तार पता - " पेटेंट्स" फोन: (033 ) 2247 4401/4402/4403 . फैक्स: ( 033 ) 22473851, 2240 1353. ई. मेल: [email protected]

2. पेटेंट कार्यालय शाखा, डब्ल्यू-5, वेस्ट पटेल नगर, नई दिल्ली 1100081

[email protected] वेब साइट : http./Ipindia.nic.in

हरियाणा, हिमाचल प्रदेश , जम्मू तथा कश्मीर, पंजाब, राजस्थान, उत्तर प्रदेश तथा दिल्ली राज्य क्षेत्रों एवं संघ शासित क्षेत्र चंडीगढ़ ।

पेटेंट अधिनियम, 1970 तथा पेटेंट ( संशोधन ) अधिनियम, 2002 अथवा पेटेंट नियम, 2003 द्वारा अपेक्षित सभी आवेदन, सूचनाएं, विवरण या अन्य दस्तावेज या कोई फीस पेटेंट कार्यालय के केवल समुचित कार्यालय में ही ग्रहण किए जाएंगे ।

तार पता : " पेटेंटोफिक " फोन : (011 ) 2587 1255, 2587 1256, 2587 1257 , 2587 1258 .

फैक्स: (011 ) 2587 1256. ई. मेल: [email protected]

शुल्क : शुल्कों की अदायगी या तो नकंद की जाएगी अथवा जहां उपयुक्त कार्यालय अवस्थित हैं, उस स्थान के अनुसूचित बैंक से नियंत्रक, पेटेंट को भुगतान योग्य बैंक ड्राफ्ट अथवा चैक द्वारा की जा सकती है । 303 THE GAZETTE OF INDIA , FEBRUARY 7 , 2004 ( MAGHA 18 , 1925)

PART III-SEC . 2]

अभिगृहित पूर्ण विनिर्देश

एतद्वारा सूचना दी जाती है कि आवेदनों में किसी पर पेटेंट अनुदान का विरोध करने वाले इच्छुक व्यक्ति राजपत्र के इस निर्गमन की तिथि से चार महीने के भीतर या उक्त चार महीने की समाप्ति के पूर्व, प्ररूष 4 में यदि आवेदित किया हुआ हो, तो परवर्ती एक महीने के भीतर, किसी समय, नियंत्रक, पेटेंट को ऐसे विरोध की सूचना प्ररूप 7 में उपयुक्त कार्यालय में दे सकते हैं । विरोध का लिखित कथन साक्ष्य के साथ , यदि कोई हो, दो प्रतियों में उक्त सूचना के साथ या अगले दो महीने की अवधि के भीतर दाखिल किया जाए । इस संदर्भ में , यथा संशोधित पेटेंट अधिनियम, 1970 की धारा 25 एवं पेटेंट नियम, 2003 के नियम 55 से 57 का अवलोकन किया जा सकता है । उपयुक्त कार्यालय द्वारा विनिर्देश एवं चित्र आरेख , यदि हो, के छायाप्रति की आपूर्ति छायाप्रति शुल्क के रूप में प्रति पृष्ठ रु. 4/- की अदायगी पर की जा सकती है ।

COMPLETE SPECIFICATION ACCEPTED

Notice is hereby given that any person interested in opposing the grant of a Patent on any of the Applications , may, at any time within four months from the date of this issue of Gazette or within further period of one month if applied for in Form 4 before the expiry of the said period of four months , give notice to the Controller of Patents at the Appropriate Office on Form 7 of such opposition . The Written Statement of Opposition accompanied by evidence , if any, should be filed in duplicate alongwith the said notice or within further period of two months . Section 25 of The Patents Act , 1970 as amended and Rules 55 to 57 of The Patents Rules , 2003 may be referred to in this regard .

Photo copies of the specification and drawings, if any, can be supplied by the Appropriate Office on payment of photocopying charges @ Rs..4/- per page.

304

[PART III-SEC. 2 THE GAZETTE OF INDIA . FEBRUARY 7, 2004 (MAGHA 18 , 1925 )

Ind.Cl

40F

191991 Int.Cl

C22C 26/00 B24D 3/0 5

Title

PROCESS FOR THE MANUFACTURE OF DIAMOND TOOLS BY HOT SINTERING

Applicant : UMICORE OF RUE DU MARAIS 31 , B - 1000 , BRUSSELS , BELGIUM Inventor :

1. ROGER STANDAERT.

2. IVAN DU BOIS .

Application no. 2045/ CAL/1996 FILED ON 27.11.1996 (CONVENTION NO. 095 01014 FILED ON 08.12.1995 IN BELGIUM.)

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)

PATENT OFFICE KOLKATA.

11 CLAIMS .

Process for the manufacture of diamond tools by hot sintering which comprises , using a pre -alloyed powder containing iron , as binder during mixing said powder with diamond , followed by sintering ofthe resultant mixture , characterised in that Said powder has an average particle size of less than 8 µm.as measured with the Fisher Sub Sieve Sizer and a loss of mass by reduction in hydrogen of less than 3 % as measured according to the standard ISO 4491-2: 1989 ; and in that In contains , in % by weight, 10-80% of iron , 0-40% of cobalt , 0-60% of nickel and 0-15% of M, M being present, wholly or partially , in the oxidized state and representing one or more of the elements Mn, Cr, V , Al, Mo and Ti , the other components in the powder consisting of unavoidable impurities , such as herein described.

Complete Specifications : 15 pages.

Drawings: 1 sheets 305 THE GAZETTE OF INDIA , FEBRUARY 7 , ,2004 ( MAGHA 18, 1925 )

PART III-SEC . 2]

191992 126 D 206 F

Ind.Cl

G01T 1/202

Int.Cl '

Title

SQUARE ANTI - SYMMETRIC UNIFORMLY REDUNDANT ARRAY CODED APERTURE IMAGING SYSTEM .

Applicant :

AIL SYSTEMS , INC, OF 455 COMMACK ROAD , DEER PARK NEW YORK 11729-4591 , UNITED STATES OF AMERICA .

WALTER CHING -HWEI . CHIOU .

Inventor :

RICHARD CONCETTO . AUGERI

18/CAL/ 1997 FILED ON 03.01.1997

Application no.

(CONVENTION NO. 586, 555 FILED ON 16.01.1996 IN UNITED STATES OF AMERICA. ) APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)

PATENT OFFICE KOLKATA.

9 CLAIMS.

DISPLAY

Fig.13

RIVE CONTROL A square anti - symmetric uniformly redundant array coded aperture for imaging a source of non- focusable radiation, the coded aperture comprising transparent and opaque cells , the coded aperture being positionable in opaque cells , the coded aperture being positionable in a first position and a second position characterised in that the second position is rotatably offset from the first position by 90°. the coded aperture exhibits a square normal mask pattern at the first position and the coded aperture exhibits a square complementary mask pattern at the second position whereby substantially all of the opaque cells exchange locations with substantially all of the transparent cells .

Drawings: 12 sheets

CompleteSpecifications : 54 pages.

306

THE GAZETTE OF INDIA , FEBRUARY 7 , 2004 ( MAGHA 18 , 1925)

[PART III SEC . 2 Ind.Cl

129 G

191993 Int.Cl

B67D3/00

Title

WATER DISPENSER OF THE REFRIGERATOR

Applicant : DAEWOO ELECTRONICS CORPORATION OF 686 AHYEON- DONG, MAPO-GU, SEOUL , KOREA .

Inventor

LEE, JAE-HEE

Application no . 531/CAL/ 1997 FILED ON 26.03.1997 (CONVENTION NO. 96-16496 FILED ON 16.5.1996 IN KORE .)

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)

PATENT OFFICE KOLKATA.

12 CLAIMS .

41 25

19.

Awater dispenser of the refrigerator, wherein the water tank of the water dispenser can be refilled by supplying the water from the outside of the door of the refrigerator , comprising: Awater supply reservoir means which is built in the outer of the door of the refrigerator and is located higher than said water tank of said water dispenser;

21-

39-

31.

A water flowing means for connecting said water supplying reservoir means to said water tank ; and a water supplying guide means which is inserted into said water supplying reservoir means to make the water flowing line to facilitate the supplying of water from the outside of the door of the refrigerator .

Complete Specifications : 19 pages .

Drawings: 5 sheets 307:

THE GAZETTE OF INDIA , FEBRUARY 7, 2004 ( MAGHA 18 , 1925)

PART III-SEC . 2]

191994 142, 35 G

Ind.Cl

C04B 41/50 41/45 , 41/46

Int.Cl

Title

PROCESS FOR OBTAINING CERAMIC ARTICLES COLOURED ON SURFACE AND INSIDE .

Applicant :

VIGNALI GRAZIANO , OF VIA 4 NOVEMBRE 15 , 40037 SASSO MARCONI (PROVINCE OF BOLOGNA) , ITALY.

VIGNALI GRAZIANO

Inventor :

Application no. 626/CAL / 1997 FILED ON 10.04.1997 (CONVENTION NO. M196A000706 FILED ON 12.04.1996 IN ITALY.)

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)

PATENT OFFICE KOLKATA .

6 CLAIMS .

Process for obtaining ceramic articles coloured on surface and inside, in colours ranging, after firing, from yellow to orange , characterized in that the process comprises the following steps in sequence: (a) adding to the ceramic mass, before moulding , Ti02 in an amount ranging from 0.5% to 10% by w. and, optionally, Al (OH)3 in an amount of 1 % -8% by w. (on the dry material), and treating the moulded articles before firing with a solution in water or in aqueous mixture with water miscible organic sol vents, comprising an organic or inorganic Cr compound and a compound, such as herein described, of an element selected from Sb or Zn or Zr or Mn or their mixtures, said solution, containing compounds of the above elements in such concentrations that when applied to the ceramic surface in amount of 30 to 600 g/m2 secures the application of:

i . 0.1 to 30 g /m² of Cr and 1 to 90 g / m² of Sb , or

ii . 0.05 to 20 g / m² of Cr and 1 to 60 g / m² of Sn , or

ii . 0.05 to 20 g / m² of Cr and 1 to 60 g / m² of Zr , or

iv . 0.05 to 20 g /m² of Cr and 1 to 40 g/ m² of Mn .

the above data being expressed as element corresponding to the used compound;

(b) drying at 100 °C the molded article to be coloured to a water residue of 0.5% by: wt . max.;

(d) equalization of the article coming from the preceding step, at room temperature for a period of 8 hours; and

(e) subsequent firing according to the normal ceramic cycle

Drawings: NIL

Complete Specifications : 16 pages.

308

THE GAZETTE OF INDIA, FEBRUARY 7, 2004 (MAGHA 18, 1925 )

ind.Cl

146D1 , 186,206 Int.Cl

H01S 3/00

Title

Applicant :

[PART III-SEC. 2

191995

AN ERBIUM DOPED OPTICAL FIBER AMPLIFIER DEVICE

SAMSUNG ELECTRONICS CO . LTD. OF 416, MAETAN- DONG , PALDAL -GU, SUWON -CITY, KYUNGKI - DO, KOREA

Inventor

DO-HYUNG LEE Application no. 1298/CAL/ 1997 FILED ON 09.07.1997 (CONVENTION NO. 32235/1996 FILED ON 01.08.1996 IN KOREA.)

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)

PATENT OFFICE KOLKATA.

11 CLAIMS .

START

INITIALIZE -502

SET CONTROL LEVEL YALUE HE OF FILTER 504 ACCORDING TO WAVELENGTH

An erbium doped fibre amplifier device for automatically tracing and filtering transmitted light signal wavelength and preventing noise caused by the properties of the amplifier comprising :

Whex = Whex+ 1 ~506

Optical filtering unit (212) ;

MEASURE AND STORE

Optical amplifying unit (210);

-508

OUTPUT LIGHT INTENSITY

8/8

-514

PERFORM DETAILED TRACE MODE WITHIN RANGE PREVIOUSLY SET

ADJUST FILIER TO LOWER LEVEL THAN THE LEVEL WHERE OUTPUT LIGHTINTENSITY -518 IS MAXIMIZED AND MEASURE BRENSITY OF OUTPUT LIGHT

-518

INCREASE CONTROL LEVEL OF FILTER BY ONE LEVEL AND MEASURE OUTPUT UGHT INTERSITY

Wavelength control unit (224)

510

Whex

Analog/digital

(222,228 ) ;

converter

AGREED WITH LAST LEVEL ESTABLISHED ?

LYES

OUTPUT LIGHT 520 INTENSITY AFTER INCREASING LEVEL BY ONE LEVELCOUTPUT LIGHT PRENSITY BEFORE INCREASING THE LEVEL

Digital/analog converter (226)

IS THERE 512

Separation tap (202, 214); and Photodiode (220, 216) ;.

MAXIMUM OUTPUT LIGHT INTENSITY WITHIN NO FILTER CONTROL LEVELS PREVIOUSLY SET?

YES Said optical filtering unit (212) eliminates noise caused by the properties of the amplifier wherein said wavelength control unit (224) improves the reliability of said optical amplifying unit (210) and discriminates selectively the transmitted light signal of wavelengths. desired

Complete Specifications : 13 pages.

TES

-522

DECREASE CONTROL LEVEL OF FILTER BY ONELEVEL

OUTPUT 524 LIGHT INTENSITY AFTER DECREASING LEVEL BY ONE LEVEL OUTPUT LIGHT INTENSITY BEFORE DECREASING THE LEVEL

YES

MAXIMUM LIGHT OUTPUT INTENSITY -CONTROLLED LIGHT OUTPUT INTENSITYIN PRESENT 528

EFFECTIVE RANGE

FIG.

Drawings: 6 sheets 309 THE GAZETTE OF INDIA , FEBRUARY 7 , 2004 (MAGHA 18, 1925)

PART III-SEC. 2]

191996

62E

Ind.Cl

D06F 37/12

Int.Cl

WASHING MACHINE

Title

Applicant :

MATSUSHITA ELECTRIC INDUSTRIAL CO . LTD, OF 1006 OAZA KADOMA, KADOMA - SHI, OSAKA 571 , JAPAN

1. MASAKUNI TAKEKAWA .

Inventor

2. SHUNJI IMAI,

KATSUYA SAITO .

4. JUNJI KAMIYA

Application no. 1367/CAL/ 1997 FILED ON 22.07.1997 (CONVENTION NO. 8-191920 FILED ON 22.7.1996 IN JAPAN. ) _

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003) PATENT OFFICE KOLKATA.

3 CLAIMS .

Awashing machine comprising a washing tub, a pulsator disposed rotatably in the bottom of the washing tub, and a guide wall composing a circulation water channel for feeding water from a pump compartment formed at the back side of the pulsator toward the upper direction of a side wall of the washing tub, wherein the guide wall extends a L- shaped portion at the upper end side of its rear wall to forma discharge port against the upper end portion of the front wall, and the upper end portion of the front wall is projected upward to be formed in an arc .

Drawings: 5 sheets

16 pages.

Complete Specifications :

2-447 GI/2003 310

THE GAZETTE OF INDIA, FEBRUARY 7, 2004 (MAGHA 18, 1925 )

[PART III-SBC . 2 Ind.Cl :

143; 22(A)

191997 Int.Cl

A61J 9/00; B65D 81/38

Title

BOTTLE WITH THERMALLY SHIELDED BODY.

Applicant

THEWI HOLDING B.V. OF A.J ERNSTSTRAAT 595H; 1082 LD AMSTERDAM , THE NETHERLANDS .

Inventor :

LINDA MULLER

Application no.

1369/ CAL/ 1997 FILED ON 22.7.1997

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)

PATENT OFFICE KOLKATA.

13 CLAIMS.

A bottle comprising a first component ( 10,30,110,210,310,410,510 ) which forms an inner tubular body ( 11,31 ) with a closed bottom ( 12.32) , an upper neck ( 13,33) with an opening ( 14,34) for filling and pouring a beverage , with a shaped and enlarged rim ( 14a, 34a) and, substantially between the body and the neck, a step - like annular region ( 15.35 ) for connection to the upper rim ( 16,36) of a second component ( 17,37,117,217,317,417,517 ) which is coaxial to the first one and forms an outer tubular body ( 18,38 ) which has a closed bottom ( 19,39) and forms an interspace (20,40) together with the tubular body ( 11,31 ) of the first component (20,30 ),. characterized in that a hermetic coupling being provided for said interspace (20,40) at the annular region ( 15,35) of said first component and the upper rim ( 16,36 ) of said second component.

34a

380

306

ORIGINAL

(380

40 31

Fig.2d

Fig.2c

Complete Specifications : 16 pages .

Drawings: 4 sheets 311 THE GAZETTE OF INDIA , FEBRUARY 7, 2004 ( MAGHA 18, 1925)

PART III-SEC . 2]

191998

116D

Ind.Cl

B65G 47/86

Int.Cl

Title

SERVO-HYDRAULIC TRANSFER MECHANISM FOR GLASS

ARTICLES

Applicant :

LIBBEY GLASS INC . OF 940 , ASH STREET, TOLEDO , OHIЮ 43611, UNITED STATES OF AMERICA .

GARY G. REID.

Inventor :

1631/CAL/ 1997 FILED ON 04.09,1997

Applicationno.

CONVENTION NO. 08/730,071 FILED ON 15.10.1996 IN UNITED STATES OF AMERICA. )

(

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)

PATENT OFFICE KOLKATA.

7 CLAIMS.

Aservo-hydraulic transfer mechanism for glass articles , comprising in combination:

aframe having first end, a second end, a first side and a second side, each of said first and second sides having at least one guide rail ; a hydraulic fluid source;

aprogrammable computer;

acompressed air source; and

a first transfer unit and a second transfer unit each of said transfer units comprising;

atransfer slide assembly reciprocally mounted on said at least one guide rail on

one of said first and second sides by roller for providing rolling engagement between said transfer slide assembly and said at least one guide rail on one of said first and second sides ... ,

,a first hydraulic cylinder operatively connected to said transfer slide assembly and said hydraulic fluid source to move said transfer slide assembly in a substantially horizontal direction between said firstand second ends of said frame;

a first linear positioned transducer operatively connected to said first hydraulic cylinder and said programmable computer to monitor movement of said transfer slide assembly;

agripper device for gripping glass articles operatively connected to said transfer slide assembly, saidgripper device having a gripper head provided with at least two opposed reciprocating gripper fingers , said gripper device being operatively connected to said compressed air source to move said fingers between open and closed positions, said compressed air source being operatively connected to saidprogrammable computer to control movement of said fingers;

asecond hydraulic cylinder operatively connected to said gripper device and said hydraulic fluid 312

THE GAZETTE OF INDIA , FEBRUARY 7 , 2004 ( MAGHA 18, 1925 )

[PART III-SEC. 2

のレ

78 76

76 16

で

FIG 1

545

のの

inger

source to move said gripper device in a substantially vertical direction ; and a second linear positioned transducer operatively connected to said second hydraulic cylinder and said programmable computer to monitor movement of said gripper device.

Complete Specifications : 10 pages .

Drawings: 6 sheets 313 THE GAZETTE OF INDIA, FEBRUARY 7, 2004 (MAGHA 18 , 1925)

PART III-SEC . 2]

191999 32E 32F 80K

Ind . Cl .

B016D 61/00 B01J 19/24 C08 G 63/78

Int.Cl'

Title

AN IMPROVED PROCESS FOR MANUFACTURE OF POLYESTER RESIN .

Applicant :

MOBILE PROCESS TECHNOLOGY, CO. OF 2070 , AIRWAYS BOUEVARD, MEMPHIS , TENNESSEE 38114, UNITED STATES OF AMERICA.

MICHAEL DEAN KELLY

Inventor

1447/CAL/98 FILED ON 13.08.1998

Application no .

(CONVENTION NO. 08/942,250 FILED ON 01.10.1997 IN UNITED STATES OF AMERICA .) APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)

PATENT OFFICE KOLKATA.

7 CLAIMS .

An improved processcocess for the manufacture of polyester resin such as herein described from the esterification of an aromatic acid such as herein described with a glycol such as herein described followed. by polycondensation in the presence of a metal oxide catalyst such as herein described in which spent glycol is removed during the course of the polycondensation reaction along with insolubles , unpolymerized monomers , large particulates , low molecular weight oligomers , metal oxide catalyst , cation impurities and anion impurities , and trace amounts of other additives and impurities , characterised in the steps of :

( a ) increasing the temperature of the spent glycol to maintain the monomer dissolved in solution ;

(b ) passing the spent glycol through a coarse filter screen to remove large particulates ;

( c ) passing the spent glycol to a crossflow membrane filtration device with sufficient fluid velocity across the crossflow membrane filtration device to maintain turbulent flow;

(d) collecting glycol permeate filtration device ; from the crossflow membrane ( e ) recycling the glycol permeate to the esterification process ;

314

THE GAZETTE OF INDIA , FEBRUARY 7, 2004 (MAGHA 18 , 1925)

[PART III-SEC. 2 ( f) purging the retentate containing the concentrated insolubles ; and

(g) separating the concentrated insolubles from the purged retentate .

Complete Specifications : 14 pages.

Drawings: 2 sheets 315 THE GAZETTE OF INDIA , FEBRUARY 7, 2004 (MAGHA 18 , 1925)

PART II-SEC . 2]

192000 33 F

Ind.Cl

B22D 11/06

Int.Cl '

A COOLING ROLL FOR A CONTINUOUS CASTING MACHINE

Title

Applicant :

ACCIAI SPECIALI TERNI S.P.A OF V.LE B. BRIN 218, 05100 , TERNI ITALY

AND

VOEST-ALPINE INDUSTRIEANLAGENBAU GMBH, OF TURMSTRASSE 44, A-4020, LINZ , AUSTRIA

1. ALESSANDRO FERRETTI .

Inventor :

2. PIETRO TOLVE .

3. ROMEO CAPOTOSTI .

4. GERALD HOHENBICHLER

2004/CAL/ 1998 FILED ON 12.11.1998

Application no.

(CONVENTION NO. RM97A000694 FILED ON 12.11.1997 IN ITALY.)

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)

PATENT OFFICE KOLKATA.

9 CLAIMS.

Acooling roll for a continuous casting machine, said cooling roll having a rotatable roller surface adapted to contact a continuously cast hot metal strip for the cooling ofthe metal strip,

Said roller surface being provided with unevenly spaced surface dimples, said surface dimples comprising:

Afirst group of cavities having a depth between 2 and 10 µm, and a diameter between 10 and 50 µm , and

Asecond group of cavities having a depth of between 40 and 200 µm and a diameter between 0.2 and 1 mm.

Drawings: 4 sheets

Complete Specifications : 10 pages.

316

THE GAZETTE OF INDIA , FEBRUARY 7, 2004 (MAGHA 18 , 1925)

[PART III-SEC . 2 IND . CL.

: 153

192001

INT . CL.

: B03 D 1/14

TITLE

: AN IMPROVED SAFE HOLDER FOR ABBRASIVE DISCS POLISHING :

APPLICANT & INVENTOR

PRAVIN MANGAL PANCHAL , 4, VIRESHWAR DARSHAN, G.B.I. MARG , VILE PARLE (EASE ) , MUMBAI - 400 057 , MAHARASHTRA , INDIA . INDIAN NATIONAL

INTERNATIONAL APPLICATION NO :

INDIAN

: 736/BOM/ 1998 DATED 23.11 . 1998

APPLICATION NO .

PRIORITY NO . :

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4 , PATENTS RULES 2003 ) PATENT OFFICE BRANCH , MUMBAI - 13 .

2 CLAIMS

An improved safe holder for polishing abrasive disc consisting of a steel spindle ( 2 ) at one end or which having a knurled surface (3 ) a plastic body (4) is moulded over the knurled surface ; the said plastic body is having a circular flange (5) & longitudinal groove portion ( 6) ; the said circular flange having insight ribs (7) at 90° apart for better gripping of the abrasive disc ( 8 ) ; a end cap (9) of plastic molded material with radial groove ( 10) is pressed over the abrasive discs positioned in between the flange and the cup shaped locking means for better gripping and positioning of the abrasive discs .

Comp.spccn .: 5 pages

Drawings 1 sheet 317 THE GAZETTE OF INDIA , FEBRUARY 7 , 2004 (MAGHA 18 , 1925 )

PART III-SEC . 2]

192002

170D

IND CL .

: C11D -13/18

INT . CL .

: AN EXTRUDER .

TITLE

APPLICANT

: HINDUSTAN LEVER LIMITED , HINDUSTAN LEVER HOUSE , 165/166 BACKBAY RECLAMATION, MUMBAI 400 020 , MAHARASHTRAM INDIA. AN INDIAN COMPANY

1. VELAYUTHAM KALYANASUNDARAM

INVENTORS

2. RAMACHANDRAN KALARIKKAL

DATED

INTERNATIONAL :

APPLICATION NO

750 BOM 1998 DATED 24-11-1998

INDIAN :

Complete specification filed after provisional specification on:

APPLICATION NO .

22.11.1999

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES 2003 ) , PATENT OFFICE BRANCH , MUMBAI - 13 .

06 CLAIMS

An extruder comprising a screw having threads formed thereon, wherein said screw is housed in a barrel , one end of which is provided with means for forming the material into the detergent pellets/noodles , bars or billets , and wherein said threads define lead angle of 85 to 92 degrees with respect to the root of the screw.

Drawing: 01 sheet

Prov.specn .: 08 pages

Drawings: 01 sheet

Comp.specn: 08 pages

Pleare 1

3-447GI/2003 318

THE GAZETTE OF INDIA , FEBRUARY 7 , 2004 (MAGHA 18 , 1925 )

[PART III-SEC . 2 IND. CL .

32B

192003

INT . CL .

: C 08 F -4/ 28

TITLE

: AN IMPROVED PROCESS FOR THE COMMERCIAL PRODUCTION OF 1,3 - BUTYLENE GLYCOL .

APPLICANT

: SOMAIYA ORGANICS ( INDIA) LTD . , AN INDIAN COMPANY, 121 , AGRA BUILDING, 2ND FLOOR , MAHATMA GANDHI ROAD , MUMBAI - 400 023 , MAHARASHTRA , INDIA .

INVENTORS

( 1 ) SANGEETA SRIVASTAVA

(2) D.V. DESIIMUKH

(3) DR.KAVITA CHANDNANI

(4) DR.A.K. SINGH

-DATED ---

INTERNATIONAL APPLICATION NO

INDIAN

70 BOM 1999 DATED 28.01..1999

APPLICATION NO .

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES 2003 ) , PATENT OFFICE BRANCH, MUMBAI - 13 .

07 CLAIMS

An improved process for production of 1,3 - butylene glycol from acetaldehyde comprising the following steps:

(i) subjecting acetaldehyde to aldol condensation ;

( ii ) stopping the aldol condensation of step ( i ) before percentage conversion of acetaldehyde into acetaldol reaches 60 % and

( iii ) hydrogenating the reaction products of step (ii) in the presence of a solvent , without subjecting to steam distillation in and also in the presence of a Nickel catalyst on a suitable carrier .

Comp , speen . 11 pages

Drawings : NIL

to 319 THE GAZETTE OF INDIA, FEBRUARY 7, 2004 (MAGHA 18 , 1925 )

PART III-SEC . 2]

192004

170G

IND . CL .

A 61 K - 31 / 24

INT. CL .

ORAL CARE DENTIFRICE COMPOSITIONS

TITLE

APPLICANT

: HINDUSTAN LEVER LIMITED , HINDUSTAN LEVER HOUSE , 165/166 BACKBAY RECLATION , MUMBAI 400 020 , MAHARASHTRA , INDIA. AN INDIAN COMPANY .

RAQUEL SILVEIRA RAMOS ALMEIDA

INVENTOR

DATED-

INTERNATIONAL APPLICATION NO

80 BOM 1999 DATED 01.02.1999

INDIAN APPLICATION NO .

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES 2003 ) , PATENT OFFICE BRANCH , MUMBAI - 13 .

04 CLAIMS

An oral care dentifrice composition in the form of a transparent gel , comprising a thickening silica, and an abrasive silica with a refractive index of 1.47 or below in a polyol- humectant -containing liquid vehicle , characterized in that the gel further contains from 0.5 10 5 % by weight of an alkali metal bicarbonate source .

Drawings : NIL

Comp.specn. 11 pages [PART III-SEC . 2 320

THE GAZETTE OF INDIA , FEBRUARY 7 , 2004 (MAGHA 18, 1925)

192005

: 170 D

IND . CL.

C 11 -D 3/00 . 11/00

INT . CL .

: SOAP BAR.

TITLE

APPLICANT

HINDUSTAN LEVER LIMITED ,

HINDUSTAN LEVER HOUSE, 165/166 BACKBAY RECLAMATION , MUMBAI -400 020 MAHARASHTRA , INDIA . AN INDIAN COMPANY

1. JOHN GEORGE CHAMBERS .

INVENTOR

2. GEOFFREY IRLAM .

3. BRYAN STUART JOΥ.

INTERNATIONAL

APPLICATION NO

INDIAN

: 107 BOM 1999 DATED 11. 2-1999

APPLICATION NO .

: 9803771.6 DATED 23-02-1998 OF U.K.

PRIORITY NO .

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4 , PATENTS RULES 2003 ) , PATENT OFFICE BRANCH , MUMBAI - 13 .

13 CLAIMS

A soap bar comprises :

(A) 30 - 60 % by wt . of an alkali metal salt of a fatty acid mixture (soap mixture ) consisting of:

(i) 65-90% soap having 1-14 carbon atoms, which includes 2 15% soap having 1-10 carbon atoms, and which further includes 1 - 10% by wt . Soap having 1-8 carbon atoms . and

(ii) 1035 of soap having grater than fourteen carbon atoms of which 0-25% is unsaturated soap ;

(B) 335% by wt . fatty acid;

(D) 13-15 % by wt. water.

Drawings - Nil - sheet Comp.specn .: 11 pages 321 THE GAZETTE OF INDIA , FEBRUARY 7, 2004 (MAGHA 18, 1925 )

PART III-SEC . 2]

192006

57 A

IND . CL .

E04 B -002/38

INT . CL .

A FREE STANDING PARTITION PANEL

TITLE

APPLICANT

: GODREJ & BOYCE MANUFACTURING COMPANY LIMITED , PIROJSHANAGAR, VIKHROLI , MUMBAI 400 079. MAHARASHTRA , INDIA . AN INDIAN COMPANY.

GIRISH VYANKATRAO NALAVADE

INVENTORS

------ DATED-

INTERNATIONAL APPLICATION NO

487 BOM 1999 DATED 07.07.1999

INDIAN APPLICATION NO .

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4, PATENTS RULES 2003 ) , PATENT OFFICE BRANCH , MUMBAI - 13 .

02 CLAIMS

A free standing partition panel comprising a pair of spaced apart vertical members and a top member associated with a gasket or liner and interconnecting the vertical members at the top thereof; at least one rigid modular race way structure removably fitted to the vertical members and comprising a pair of spaced apart horizontal members and a pair of spaced apart end members fitted to one another to define a raceway within: the said end members being provided with slots matching with corresponding slots in the vertical members : a paid of side panel members each being hinged to the front side and back side of the said race way structure ; the said bottom horizontal member being provided with glide screws for level /height adjustment ; a pair of retainer members each being located at the distal end of each of the said side panel members and fitted to the said horizontal members ; and a partition panel consisting a block(s) located in the remaining hollow space( s ) between the vertical members and fittedthereto.

Comp.specn . 14 pages Drawings: 05 sheets

g 322

THE GAZETTE OF INDIA , FEBRUARY 7 , 2004 (MAGHA 18, 1925 )

[PART III-SEC . 2 IND . CL .

192007 INT. CL.

:

A46 B -1 / 00 13/02

TITLE

: A BATTERY OPERATED ELECTRIC TOOTHBRUSH WITH AN ANGLED SHAFT.

APPLICANT

: PROCTER & GAMBLE INTERNATIONAL OPERATIONS, S.A. OF 47 - ROUTE DE SAINT- GEORGE 1213 PETIT LANCY 1 , GENEVA, SWITZERLAND , SWISS COMPANY.

INVENTORS

1. LAWRENCE A. BLAUSTEIN

2. JOHN R. NOTTINGHAM

3. JOHN OSHER

4. JOHN W.SPPIRK

INTERNATIONAL APPLICATION NO INDIAN

664 BOM 1999 DATED 21.09.1999

APPLICATION NO .

PRIORITY NOS . : 09/236,794 DATED 25.01.1999 OF U.S.A. 09/163,621 DATED 30.09.1998 OF U.S.A.

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4 , PATENTS RULES 2003) , PATENT OFFICE BRANCH , MUMBAI - 13 .

12 CLAIMS

Abattery operated electric toothbrush with an angled shaft comprising:

an elongated body ( 10) having a handle portion ( 18), a head portion (16), and an elongated body shaft portion (28) intermediate the handle portion and the head portion and wherein the elongated body shaft portion has a smaller cross- sectional dimension than the handle portion , the head portion having static and moving bristles, said moving bristles rotate or swivel or reciprocate about an axis normal to the longitudinal axis ( 19) of the said head; the head portion and the body shaft portions being dimensioned for disposition in a human user's mouth for brushing of teeth; and

a motor ( 32 ) disposed in the hollow handle portion (30) and operatively connected to the moving bristles with a gearing (40) and shaft assembly having an elongated shaft (44) closely received in and extending along at least a portion of the length of the body shaft portion for driving the moving bristles .

Comp.specn . 18 pages Drawings : 11 sheets tg

৯

Fig.2 323 THE GAZETTE OF INDIA, FEBRUARY 7 , 2004 (MAGHA 18, 1925)

PART III-SEC . 2]

192008

IND . CL .

: A 46 B - 1 / 00 , 5/04

INT . CL.

: A FINGER BRUSH

TITLE

APPLICANT

HINDUSTAN LEVER LIMITED , HINDUSTAN LEVER HOUSE, 165/166 BACKBAY RECLATION , MUMBAI 400 020, MAHARASHTRA , INDIA . AN INDIAN COMPANY.

1. AMIT MOHANDAS GORADIA

INVENTORS

SHASHANK VAMAN DHALEWADIKAR 2.

INTERNATIONAL :

APPLICATION NO

829 BOM 1999 DATED 22.11.1999

INDIAN

Complete specification filed after provisional specification on:

APPLICATION NO .

21.11.2000

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4, PATENTS RULES 2003) , PATENT OFFICE BRANCII , MUMBAI - 13.

25 CLAIMS

A finger brush comprising:

a brush body having inner and outer sides , said inner side having a finger- supporting arrangement for holding the brush to a finger of varying thickness , at least some portion of the outer side bearing bristles and/or bundle of bristles which does not come into contact with the fingers.

36 36 за

Fi 1

Drawings: 2sheets Prov . Speen . 12 pages

Drawings: 2 sheets Comp.Speen . 16 pages 324

[PART III-SEC. 2 THE GAZETTE OF INDIA , FEBRUARY 7 , 2004 (MAGHA 18, 1925 )

IND. CL .

: 32 F1

192009 INT . CL .

: C07C85/ 08 , C 07 C - 87/ 40

TITLE

: NOVEL METHOD TO PREPARE SERTRALINE HYDROCHLORIDE .

APPLICANT

: CADILA HEALTHCARE LIMITED , ZYDUS TOWER , SATELLITE CROSS ROADS, GANDHINAGAR- SARKHEJ , HIGHWAY, AHMEDABAD 380 015 , GUJARAT, INDIA . AN INDIAN COMPANY

INVENTORS

1. PANDEY ΒΙΡΙΝ

2. LOHRAY VIDYA BHUSAN ,

3. LOHRAY BRAJ BHUSAN

INDIAN

83 MUM 2001 DATED 24.01.2001

APPLICATION NO . Complete specification filed after provisional specification on: 23.01.2002 .

APPROPRIATE OFEICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES 2003 ) , PATENT OFFICE BRANCH , MUMBAI - 13 .

13 CLAIMS

A process for the preparation of Sertraline compounds of formula 1, which comprises the sequential series of steps that involve

(a) stereoselective reductive amination by reacting 4- ( 3,4 - dichlorophenyl ) -1,2,3,4- tetrabydro -naphthalen - 1 - one ( DCPT ) of formula II with methylamine , in the presenec of an organic base such as hereinbefore described , treating the product so obtained With a Lewis acid at temperature between 5 ° C to 40 °C for Lewis acid condensation and subsequent reduction by reacting with reducing agents such as hercinbefore described attemperature between 9 ° C to11 °C;

NHCH

NHCH3

1.MeNH11C1 Lewis Acid

OrganicBase

2. Rediemg Agent

IV(±) trans isomers

111 (1) cis isomers

(major)

(b ) separation in any conventional manner , of substantially geometrically pure racemie ( 4) cis sterenisomer III , from a mixture of cis (III ) and trans ( IV ) isomers as salt ;

(c) resolution of substantially geometrically pure racemie ( ± ) cis stereoisomer III cis -base its (18- cis) -4- (3,4 -dichlorophenyl) -1,2,3,4 - tetrahydro -N - methyl - 1 - naphthalenamine, by employing suitable resolving agents like tartaric acid , mandelię acid and camphor sulfonic acid;.

325 THE GAZETTE OF INDIA, FEBRUARY 7, 2004 (MAGHA 18, 1925)

PART III-SBC . 2]

NHCH

NHCH3

Resolution

Freebase

III(+) cis isomers

hydrochloride

formation of hydrochloride salt from (+ ) 1S- cis- free base as ( +) ( 1S- cis )-4-(3,4- dichlorophenyl ) -1,2,3,4 -tetrahydro - N -methy)-1 -naphthalenamino

(Sertraline) .

NHCH

NHCH3

JICL

(+) Sertraline hydrochlorida

Free base

Drawings Nil sheet Provisional Specification : 5 pages

Drawings Nil sheet Complete Specification : 19 pages

4-447 GI/2003 326

THE GAZETTE OF INDIA, FEBRUARY 7, 2004 (MAGHA 18, 1925)

[PART III-SEC. 2 IND . CL .

: 55 D2

192010 INT . CL .

: A 61 K - 027 / 12 , A 01 N - 25/00, 27/00

TITLE

: THE PROCESS FOR MAKING COILED MOSQUITO REPELLENT

APPLICANT

: GODREJ SARALEE LTD . , PIROJSHANAGAR, EASTERN EXPRESS HIGHWAY, VIKHROLI ( E) , MUMBAI 400 079, MAHARASHTRA , INDIA . AN INDIAN COMPANY.

INVENTOR

: 1) PUTHUCODE RAMA IYER KASI VISWANATHAN

2)

PANDIT NEELAM

INTERNATIONAL APPLICATION NO

144/MUM/2002 DATED 18.02.2002

INDIAN APPLICATION NO .

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES 2003 ) , PATENT OFFICE BRANCH, MUMBAI - 13.

17 CLAIMS

A process for manufacturing a coiled mosquito repellent comprising 20-80% filler material such as cellulose, 30-60% guar gum as binder, 15 to 30% of as burning materials such as coconut shell, saw powder saw dust, insect repellent active such as esbiothrin, esbiol , prallethrin 0.01%-5%, 0.1-5% emulsifiers , 0.01-0.5% fire retardant such as Potassium nitrate, and the said coil is manufactured by mixing the dry ingredients in a rotary blender , emulsifying the active ingredient and adding the active to the dry ingredients to form a uniform dough and placing the dough in a rotary mold machine used in manufacturing dry baked products wherein the dough is rolled between the two rotary cylinders having circular mold to make circular spiral shaped coil and the said coil has circular/semicircular cross sectional area ranging between 7- 28mm² and a burning rate ranging between 50mm- 90mm/hr .

Comp.specn . 17 pages

Drawings : 4 sheets 327 THE GAZETTE OF INDIA , FEBRUARY 7 , 2004 ( MAGHA, 18 , 1925 )

PART III-SEC . 2]

192011

35 C [XXV( 2) ]

IND. CL .

C 04 B -7/12 , 24/4

INT . CL .

F 21 B -033/44

TITLE

A PROCESS FOR MANUFACTURING LOW POROSITY DENSE ULTRA HIGHSTRENGTH (UHS) CEMENT COMPOSITION.

THE ASSOCIATED CEMENT COMPANIES LTD. ,

APPLICANT

' CEMENT HOUSE' ; 121 MAHARASHI KARVE ROAD , MUMBAI -400 020, MAHARASHTRA, INDIA , AN INDIAN COMPANY .

INVENTORS

1 ) DEBASHISHGOSH

2) VILAS VISHWANATH DESHMUKH

3) PRADEEP SHRINIVAS KADUSKAR

4) RUSTOM MINOCHER CURSETJI

5) ANJAN KUMAR CHATERJEE

INTERNATIONAL :

APPLICATION NO .

DATED 28/08/1998

549/BOM/ 1998

INDIAN

APPLICATION NO .

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4,PATENTS RULES 2003 ) PATENT OFFICE BRANCH , MUMBAI - 13 .

02 CLAIMS

1 ) A process for manufacturing low porosity dense ultra high strength (USH) cement composition characterized by the following steps:

a) dry pulverizing and sieving source of bauxite into coarse to fine particle size varying from 4 mm to 100 micron particle size and mixing in 30:70 ratio;

b) drygrinding 5 to 50 % by weight of herein stated silica source to 3-5 micron particle size;

c) dry mixing in intensive mixer 10-40 % by weight of hydraulic cement with or without addition of herein stated source of lime reacting mass such as fly ash and / or inert particles of fine quartz sand, metal fibers having 1 to 1000 micron particle size; dry mixing in an intensive mixer the product of step with product of step (b) in intensive mixer while slowly adding the product of step (a) and with addition of 75% by weight of total herein stated plasticizer sol or sol of herein stated high performance water dispersing agents such as formaldehyde condensate required for making a dough mass followed by addition of 25% balance by weight of said aqua sol while mixing is continued for another 20-30 minutes til! dough of desired consistency is obtained;

d) said dough of step when molded or extruded into any desired intricate shapes and cured in water at temp. us to 100 deg . C. in high pressure autoclaves upto 300 deg . C. for a period of at least 24 hours and which on cooling down to ambient temp . attains herein stated product analysis forming ideal substitute for metals , alloys , ceramics in architectural and engineering plastics.

Drawings : Nil Sheets

Complete Specification 14 ages 328

[PART III-SEC. 2 THE GAZETTE OF INDIA, FEBRUARY 7 , 2004 ( MAGHA 18 , 1925 )

IND . CL .

: C 08 F 6/00

192012

6/14

INT . CL .

32C

TITLE

: A PROCESS FOR PRODUCTION OF MICRO - POROUS MICROSPHERES OF POLYMERS AND POLYMERIC PIGMENTS THEREFROM .

: VINOD CHINTAMANI MALSHE

APPLICANT & INVENTORS

1 , STAFF QUARTERS, UDCT CAMPUS , MATUNGA , MUMBAI - 400 019 .

ANIL MEGHSHYAM BENDALE A - 9 RAGHUVANSH , FRIENDS COLONLY, BHANDUP , MUMBAI - 400 042 . BOTH INDIA . INDIAN NATIONAL IDEM:

INTERNATIONAL APPLICATION NO

INDIAN APPLICATION NO . : 203 /BOM/ 1999 .

DATED 19-03-1999 .

Complete Specification filed after provisional specification on 14.02.2000 .

PRIORITY NO .

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES 2003 ) , PATENT OFFICE BRANCH , MUMBAI - 13 .

40 CLAIMS

Aprocess for manufacture of micro - porous microsphers of sub - micron size polymers which are further optionally converted to polymeric pigments comprising

a) prepartion of micro -porous microspheres of sub - micron size of polymers characterized in that the said process comprises of :

mixing micro - porosity generating agent (s ) with the monomer (s ) and / or additives for some functional groups . i)

emulsifying the mix obtained at the end of step (i) , in water with the help of emulsifying agent ( s ) to give homogenous emulsion , or making micro suspension ofthe said mix in water or non - aqueous phase with the help of suspending agent (s) ii)

subjecting the said emulsion or the said suspension obtained at the end of step ( ii ) , to polymerizing and / or cross - linking reaction with addition of initiator to form the micro - porous microsphers of the polymer .

iv) Removing the non - polymerizable micro-porosity generating agent from the reaction mass at the end of step (iii) when the reaction is complete.

v) Coagulating the micro - porous microspheric polymer particles in the reaction mass remaining after step ( iv ) by addition of polymer- coagulating agent (s ) to the said reaction mass .

vi) Separating the coagulated micro -porous microspheric polymer particles form the reaction mass , washing and drying for recovering the polymers formed in the form ofmicro-porous microsphers of submicron size .

329 THE GAZETTE OF INDIA, FEBRUARY 7, 2004 (MAGHA 18, 1925)

PART III-SEC . 2]

b) preparation of colored polymeric pigment particles of sub -micron size fort microporous microspherical (MPMS) polymer particles of submicron size , with or without functional groups characterized in that the said process comprises of:

(i) preparation of solution of colouring compounds or soluble Leuco compounds which develop colours on oxidation, or soluble reactive dyes or soluble component of colouring compounds which form an insoluble colour on subsequent contact with its colour forming coupling component in solution, in solvents such as water , alcohol at required pH .

(ii) Soaking the said MPMS polymer particles in the solution for 30-60 minutes , at 20-150 ° C under pressure ifnecessary .

(iii) Separating the soaked particles obtained at the end of step (ii )

(iv) Washing, drying of the coloured polymeric pigment particles

(v) Soaking the dry particles obtained at the end of step (iii) in a coupling component when a pigment or a dye is required to be synthesized inside the pores of the pigmentary particle or, only when second component of the colouring compound is required to develop the colour, in said solution of the second component prepared in step (iii) for 30-60 minutes at 0-150 ° C under pressure when required.

(vi) Separating the soaked particles obtained at the end of step (v)

(vii) Washing, and drying of the coloured polymeric pigment particles.

Drawings Nil sheet Complete Specification : 35 pages

Drawings Nil sheet Provisional Specification : 5 pages 330

THE GAZETTE OF INDIA , FEBRUARY 7, 2004 (MAGHA 18 , 1925)

[PART III-SEC . 2 IND . CL .

: 204 [XII ( 10) ]

192013

INT . CL .

: G01 D - 5/24

TITLE

: A SCALE

APPLICANT & INVENTORS

PRAKASH KRISHNA RATNAPARKHI , AN INDIAN NATIONA OF ELEKTRA HOUSE, 691/ 1A PUNE- SATARA ROAD , PUNE 411 037 , MAHARASHTRA , INDIA.

DATED-

INTERNATIONAL APPLICATION NO

INDIAN

237 BOM 1999 DATED 30.03.1999

APPLICATION NO . Complete specification filed after provisional specification On: 12.06.2000

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4, PATENTS RULES 2003 ) , PATENT OFFICE BRANCH , MUMBAI - 13 .

04 CLAIMS

A scale for machine tools comprising an elongate extruded scale body on which a reader head is slidably mounted , a plate with gratings fixed within the base of the body optically aligned with an index plate fitted on the base of the reader head, said index plate being spaced apart from the plate with gratings , the relative displacement of the index plate with respect to the gratings adapted to generate an electrical signal received by an electronic signal processing circuit within the reader head which signal is processed and transmitted as a linear displacement signal to a remotely lecated counter characterized in that the cable transmitting the displacement signal from the reader head to the counter consists at least partly of a ribbon cable located within the elongate scale body transrnitting a signal from the reader head to a connector fitted at one end of the scale body and a further cable leading the signal from the connector to the counter.

Prov.specn.: 8 pages Drawings: 5 sheets

Comp.specn. 9 pages Drawings: 4 sheets 33t THE GAZETTE OF INDIA, FEBRUARY 7 , 2004 (MAGHA 18, 1925)

PART III-SEC . 2]

152014

134 B

IND . CL.

B60 K - 023/00

INT . CL .

TITLE

A VARIABLE POSITIVE DRIVE GEARBOX WITH BUILT IN DIFFERENTIAL AND BUILT - IN CLUTCH

APPLICANT & INVENTORS

P.SATHEESAN MENON, B /7 ANNAPURNA DHAM- CO- OP . HOUSING SOCIETY, 2ND LANE, PANDURANGWADI , P.O. DOMBIVLI (EAST),PIN 421 201 , MAHARASHTRA , INDIA .

---DATED--

INTERNATIONAL : APPLICATION NO

: 381 BOM 1999 DATED 20.05.1999

INDIAN

APPLICATION NO .

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4, PATENTS RULES 2003 ), PATENT OFFICE BRANCH, MUMBAI - 13 .

03 CLAIMS

Avariable positive drive gear box with built in differential and built in clutch comprising at power take- off end a pair of shafts parallel and distant mounted in gear box casing with rigidly fixedtoothed gear at each end; each end of said shafts provided with pinions having free-wheeling; similar arrangement is made at the wheel side end to provide a pair of shafts with toothed gear arrangement at ends with free-wheeling pinions ; a crank shaft with rigidly fixed pair of toothed- gears at ends mounted in between said pair of power take off shafts and said end toothed-gears on crank shaft meshing with the said end toothed-gears on the said shaft; a link rod having slots in vertical plane with the fulcrum at the at the center is made to oscillate by means of said crank though a connecting rod; one end of a horizontal link rod having slots and centrally fulcrum is connected to the said vertical link rod by means of a sliding link members; the said sliding is controlled and supported by threaded-screw members linked to a pinion driving a rack engaged to sliding link; a pair of rods at one end hinged to the fulcrum of the said horizontal link rod and the other end provided with circular members surfaced with cushioning material , at the other end side provided with threaded sleeve to accommodate left hand and right hand threaded rod at the ends and transversely supported on said horizontal link rod for varying the distance between the ends; a rack member meshing with the said pinion ofwheel end, having extended rod with a pair of spring controlled stoppers for said circular member at distant, hinged supported at one end of second horizontal link having slots and fulcrum at center ; a second rack engaging other end rack is hinged to the other end of the said second horizontal link; similar arrangement is made second set shaft ; a split shaft carrying wheels at end, with rigidly fixed tooth wheel at wheel side and meshing the said toothed wheels of the said pair of shafts at wheel side, supported in support box having crank in left hand side and right hand side and the said cranks are connected to a pair of vertical link member hinged at one end and both said links are distant and other ends are in opposite side and away from the hinge; the said each of vertical link is connected to a horizontal link having fulcrum in center and ends of each are connected to rack member meshed with said pinion of shafts at power take of side.

Drawings: 6 sheets

Comp.specn . 13 pages 332

THE GAZETTE OF INDIA , FEBRUARY 7 , 2004 (MAGHA 18, 1925 )

[PART III-SEC . 2 IND . CL.

: 201 C

192015 INT. CL .

: C 02 F 1/76

TITLE

: A WATER PURIFIER BELLOW PUMP WORKING ON SIPHON SYSTEM.

:

ION EXCHANGE ( INDIA ) LIMITED

APPLICANT & INVENTORS

AN INDIAN COMPANY OF TIECICON

HOUSE , DR.E.MOSES ROAD , BOMBAY - 400 011. MAHARASHTRA , INDIA .

1. DR.S.V.MEHENDALE

2. MS . SIMI THOMAS

3. MS . RUPA AVINASH LAGHATE

4. MS . KIRTI S.ITAGI .

INTERNATIONAL APPLICATION NO

INDIAN APPLICATION NO .

: 437 BOM 1999

DATED 09 : 06.1999

PRIORITY NO .

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4, PATENTS RULES 20 2003) , PATENT OFFICE BRANCH, MUMBAI - 13.

04 CLAIMS

Awater purifier bellow pump , working on siphon system having a corrugated flexible tubing (2) with inlet end and other end attached to one of the opening of the T- tube having three way opening; opposite end of the said one opening provided with closure plug ( 11 ) and third opening provided with bellow (9 ) ; charecterised that the said inlet is provided with water purifier (3a) comprising a cylindrical body( 5) containing polyiodide resin with one end open other end having central hole with extended plug detachably attached to a cylindrical adopter (3 ) ; a strainer (4) provided between the said extended plug and the said adopter ; a lid (7 ) with center opening formed by radial thick ribs provided to the said open end and filter ( 6) placed between the said body and the said lid.

ハー

Complete specification: 07 pages ,

Drawings : 05 Sheets .

333 THE GAZETTE OF INDIA , FEBRUARY 7 , 2004 ( MAGHA 18 , 1925 )

PART III-SBC . 2 ]

192016

154 F

IND . CL.

: B 41 F -9/ 02 , 11/02 , B 41 M -3/14

INT . CL .

MULTI COLOR INTAGLIO PRINTING PRESS .

TITLE

APPLICANT

: KOMORI CORPORATION OF 11-1 ,AZUMABASHI 3 - CHOME , SUMIDA- KU, TOKYO , JAPAN, JAPANESE COMPANY.

: HIROYOSHI KAMODA

INVENTOR

INTERNATIONAL APPLICATION NO

580 BOM 1999 DATED 17.08.1999

INDIAN APPLICATION NO .

PRIORITY NOS .

10-235101 DATED 21.08.1998 OF JAPAN

-188509 DATED 02.07.1999

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4, PATENTS RULES 2003 ) , PATENT OFFICE BRANCH , MUMBAI - 13 .

03 CLAIMS

Amulti -color intaglio printing press ; comprising:

a plate cylinder (15 ) capable of having three intaglio plates mounted along a circumferential direction of the plate cylinder ( 15 ) ; an ink collecting cylinder ( 16) contacted with said plate cylinder ( 15) and capable of having four blankets mounted along a circumferential direction of the ink collecting cylinder ( 16); a wiping roller ( 19) contacted with said plate cylinder ( 15) ; and an impression cylinder ( 14) having the same diameter as the diameter of said plate cylinder ( 15) , and contacted with said plate cylinder ( 15) .

Fig.1

Drawings : 2 sheets

Comp.specn. 11 pages

5-447GI/2003 334

THE GAZETTE OF INDIA, FEBRUARY 7 , 2004 (MAGHA 18 , 1925)

[PART III-SEC . 2 IND . CL .

: C21D 9/02

192017

9/00

INT . CL .

: 12D

TITLE

: A PROCESS AND APPARATUS FOR BATCH ANNEALING OF COILS IN A COLD ROLLING MILL .

APPLICANT & INVENTORS

TATA CONSULTANCY SERVICES , ( A DIVISION OF TATA SONS LTD)

AN INDIAN COMPANY, OF

BOMBAY HOUSE , SIR HOMI MODY STREET, MUMBAI - 400 023. MAHARASHTRA, INDIA .

AN INDIAN COMPANY

SAHAY SATYAM SURAJ

INTERNATIONAL APPLICATION NO

INDIAN APPLICATION NO . : 1170/MUM/ 2000 .

DATED 27/12/2000 .

Complete Specification filed after provisional specification on 23.01.2002.

PRIORITY NO .

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4, PATENTS RULES ,2003 ) , PATENT OFFICE BRANCH , MUMBAI - 13 .

07 CLAIMS

A process of batch annealing of coils in a cold rolling mill which comprises stacking a plurality of coils in a furnace , and heating the coils in the furnace in a cycle determined by data including coil dimensions , furnace in a cycle determined by data including coil dimensions , furnace dimensions operating parameters and thermal cycle to obtain coils having predetermined grain size and tensile strength , said cycle defining the temperature and time to be set for heating , soaking and cooling of the coils in the fumace feeding and processing the data into a simulator comprising three modules [ i ] thermal module ; [ ii ] microstructural module and [ iii ] mechanical property module as herein described and obtaining the optimum temperatures and time to be set for the annealing cycle for the predetermined grain size and tensile strength and settings the furnace to heat soak and cool the coils stacked therein in accordance with the set temperatures and time to obtain annealed coils .

Drawings 7 sheets

Complete specification : 29 pages

Provisional specification : 17 pages Drawings 5 sheets

FIGURE I 335 THE GAZETTE OF INDIA, FEBRUARY 7, 2004 ( MAGHA 18 , 1925 )

PART III-SEC . 2 ]

F 04 B 39/00

IND . CL .

192018

F 16 F 1/12

INT. CL.

TITLE

A METHOD OF MOUNTING A SUSPENSION SYSTEM FOR HERMETIC SEALED COMPRESSORS.

:

KIRLOSKAR COPELAND LIMITED

APPLICANT & INVENTORS

OF 1202/1 GHOLE ROAD , PUNE 411 005, MAHARASHTRA , INDIA .

AN INDIAN COMPANY

JUGE VINAYAK MADAN .

INTERNATIONAL APPLICATION NO :

DATED 13/02/2001 .

167 MUM 2001 .

INDIAN APPLICATION NO . :

Complete Specification filed after provisional specification on 11/04/2002 .

PRIORITY NO .

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4 , PATENTS RULES 2003 ) , PATENT OFFICE BRANCH , MUMBAI - 13 .

05 CLAIMS

A method of mounting a suspension system for hermetic sealed compressors consisting of a compressor body and its outer shell which comprises the steps of forming at least one recess in the form of one or more blind holes either in the cylinder block or the crank case or other solid parts of the compressor ofthe compressor body to form a seat , seating coiled springs in the seat and mounting the compressor body on the spring ends with respect to the outer shell.

FIGURE - 2h

FIGURE -20

Drawings 02 sheets

Complete specification: 07 pages

Drawings 02 sheets .

Provisional specification: 06 pages

18 24

FIGURE -24

FIGURE -20 336

THE GAZETTE OF INDIA , FEBRUARY 7, 2004 ( MAGHA 18 , 1925)

[PART III-SEC. 2 IND . C'L .

146 C

192019

INT . CL .

: Η 04 M 15/00

TITLE

: A PCO ENABLED COMPUTING DEVICE .

12IT PRIVATE LIMITED

APPLICANT & INVENTORS

OF 26-27 MUMBAI - PUNE ROAD,

PIMPRI , PUNE 411 018 .

MAHARASHTRA, INDIA .

AN INDIAN COMPANY .

1. ANUPAM SAURABH .

2. CHANDRASHEKHAR RAJE.

INTERNATIONAL APPLICATION NO

INDIAN APPLICATION NO . : 844/MUM/ 2001 .

DATED 31/08/2001 .

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4 , PATENTS RULES 2003 ) , PATENT OFFICE BRANCH, MUMBAI - 13.

02 CLAIMS

A Public Call Office equipment having facility for making and metering of STD/ISD calls as per the pulse rate applicable with an Internet Access Device consisting of a CPU having have facility for Internet surfing and Emails with billing functionality and including a built -in 56kbps modem driver software loaded in the CPU to connect to an ISP using a shared telephone line said CPU having an interface for a date connection having access to the internet access using a browser , chat and mail software etc. and a Voice over IP protocal based voice telephony software which uses a date link over internet including voice codes for data compression and toll quality telephony .

Prov . Specn. 04 Pages

Comp.specn .: 06 pages

Drawings 01 sheet 337 THE GAZETTE OF INDIA , FEBRUARY 7, 2004 (MAGHA 18, 1925)

PART III-SEC. 2]

192020

: 55 E4

IND . CL .

INT . CL .

A 61 K - 35/ 78 , A 61 K - 35/12

TITLE

: A PROCESS FOR AN AYURVEDIC PREPARATION FOR IMPROVING THE MYOCARDIAL BLOOD FLOW AND REDUCING THE OCCLUSION IN ARTERIES OF THE MYOCARDIUM

APPLICANT

: SHREE NARAYAN AYURVEDIC PHARMACY PVT.LTD . , 1184-4 , DNYANESHWAR PADUKA CHOWK , GOKULNAGAR, B - BLDG. , F.C.ROAD , SHIVAJINAGAR, PUNE 411 005 , MAHARASHTRA , INDIA . AN INDIAN COMPANY

: ANTONY JOSEPH

INVENTOR

------ DATED ---

INTERNATIONAL APPLICATION NO

1184 MUM 2001 DATED 18.12.2001

INDIAN

APPLICATION NO .

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4 , PATENTS RULES 2003 ) , PATENT OFFICE BRANCH , MUMBAI - 13 .

03 CLAIMS

A process for an ayurvedic preparation for improving the myocardial blood flow and reducing the occlusion in arteries of the myo cardium comprising the following steps:

i. Grinding a) terminalia arjuna Bark 2 parts by weight; b) acorus calamus stem 1 part by weight , c) magnifera indica bark 1 part by weight , d) moringe oelifera bark 1.35 part by weight, e ) murraya koengil leaf 1.35 part by weight, f) pipeer longum fruit 1.9 part by weight, g) boerhaavia diffusa root 1.4 part byweight;

ii. Mixing the ingredient (a) with one of the suitable excipient or mixture thereof in equal proportion in stainless steel mixer (blender) at about 30 °C for 10-15 minutes;

Transferring the blend of step (ii ) in a separate vessel ;

iv. Repeating step ( ii) and ( iii ) for ingredients b ) , c), d) ,e) , f) and g ) separately;

V. Heating the mass so obtained from steps (ii) , (iii) and (iv) with hot water circulation in a vessel jacket at about 40 ° C for about 3 hours;

vi. Transferring the heated mixture of step (v) into another vessel through a filtration pump;

vii . Transferring the filtered content into the plastic container for encapsulation .

viii . Transferring the filtered content into the plastic container for encapsulation .

Drawings: NIL

Comp. specn .: 5 pages 338

[PART III-SEC . 2 THE GAZETTE OF INDIA , FEBRUARY 7 , 2004 (MAGHA 18 , 1925 )

Ind.Cl

192021 Int.Cl '

G11C 7/00

Title

A SEMICONDUCTOR UNIT PACKAGE .

Applicant :

MATSUHITAELECTRIC INDUSTRIAL CO . LTD . OF 1006 OAZA KADOMA KADOMA - SHI , OSAKA 571 , JAPAN .

Inventor :

1. KAZUNORI OMOYA.

2 . TAKASHI OOBAYASHI .

3. WATARU SAKURAI .

4. MITSURU HARADA .

5. YOSHIHIRO BESSHO .

Application no. 1083/CAL/ 1996 FILED ON 11.06.1996

( CONVENTION NOS . 7-144373 ; 7-308798 AND 08/593,675 FILED ON 12.06.1995 , 28.11.1995 AND ON 29.01.1996 IN JAPAN, JAPAN, U.S.A. RESPECTIVELY.)

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING ( RULE 4, PATENT RULES 2003)

PATENT OFFICE KOLKATA.

9 CLAIMS.

Asemiconductor unit package which comprises :

a) A semiconductor device having an electrode pad;

b) A substrate having a terminal electrode;

c) A bump electrode formed on said electrode pad of said semiconductor device;

d) A conductive adhesive layer which is formed of a conductive adhesive with flexibility and which establishes an electrical connection between said bump electrode and said terminal electrode ; and

e) An encapsulating layer which is formed by curing a composition having a viscosity of below 100 Pa. s and a thixotropy indeed of below 1.1 and which fills a gap defined between said semiconductor device and said substrate in such a way that said semiconductor device and said substrate are mechanically joined together.

Complete Specifications : 51 pages .

Drawings: 7 sheets 339 THE GAZETTE OF INDIA , FEBRUARY 7, 2004 (MAGHA 18 , 1925)

PART III-SEC . 2 ]

192022 Ind.Cl

C 22 B 33/00 B 01D 11/02

Int.Cl '

Title

AMETHOD OF PRODUCING CHEMICALS FROM METALLURGICAL DUST AND APPARATUS THEREFOR .

Applicant, :

DRINKARDMETALOX, INC. OF 2226 , NORTH DAVIDSON STREET CHARLOTTE, NORTH CAROLINA 28205 , U.S.A.

WILLIAM F. DRINKARD . JR.

Inventor

HANS J. WERNER .

1829/CAL/ 1996 FILED ON 16.10.1996

Application no .

(CONVENTION NOS . 60/005,991 AND 08/608,726 FILED ON 30.10.1995 AND 29.02.1996 IN USA) APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING ( RULE 4, PATENT RULES 2003)

PATENT OFFICE KOLKATA .

40 CLAIMS.

Amethod of producing chemicals from metallurigal dust comprising:

a) Reacting metallurigal dust in a nitric acid solution , resulting in a nearly complete dissolution of zinc, cadmium, copper , magnesium, calsium , manganese and lead;

b) Precipitating iron from the solution by raising the pH of the solution to a pH range 1.8 to 3.5 by the addition of a basic pH adjusting agent; and

c) Removing , cadmium , copper and lead by using either an electrolytic cell or by filtration following reaction with sulphide iron;

Andoptionally carrying out an initial step of leaching the metallurigal dust with water, thereby creacting and separating the filtrate and washed metallurigal dust, and sending the filtrate to a water treatment system, leaving washed metallurigal dust residue for reaction with nitric acid solution.

Drawings: 4 sheets

Complete Specifications : 35 pages .

340

THE GAZETTE OF INDIA, FEBRUARY 7 , 2004 ( MAGHA 18 , 1925 )

[PART III-SEC . 2 Ind.Cl

107H

192023 Int.Cl

F02M , 61/16 , 61/18 , 55/02 , 59/44

Title

A FUEL INJECTION DEVICE FOR THE DIESEL ENGINES .

Applicant :

MOTORENFABRIK HATZ GMBH & CO . KG , OF ERNST- HATZ - STR . 16 , DE 94099 RUHSTORF/ROTT, GERMANY

Inventor :

GUNTER KAMPICHLER .

Application no. 591/ CAL/ 1997 FILED ON 03.04.1997 (CONVENTION NO. 19614980.0-13 FILED ON 16.4.1996 IN GERMANY.)

APPROPRIATE OFFE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003 )

PATENT OFFICE KOLKATA .

6 CLAIMS .

Fuel injection device for diesel engines comprising:

-a nozzle holder ( 1 ) having a face ( 16 ) , a center bore (7) and a pressure spring ,(8) .

-a nozzle body (3 ) having a nozzle needle (5) ,

-12 -a pressure channel (2 , 4) coupled to a fuel injection pump and extending from and through said nozzle holder ( 1 ) and nozzle body (3 ) ,

-said nozzle holder ( 1 ) being supported relative to said

nozzle body (3 ) so that said nozzle holder ( 1 ) is movable in the lengthwise direction into sealing engagement with said nozzle body ( 3 ) by means of an intermediate disk: ( 13 ) having a top ( 15 ) , and

-a deformable metal hollow cylinder sealing body ( 18) extending between a counter - sealing surface and a conical seat ( 19 ) and adapted for deformation against seat ( 19 ) with increasing tightening of a nozzle adjusting nut ( 10) which connects the nozzle body (3 ) with the nozzle holder ( 1 ) , characterized in that said sealing body ( 18 ) engages said conical seat (19) in the nozzle holder ( 1 ) which widens toward the opening of the pressure channel (2) which faces the nozzle body (3 ) , and the face ( 16) of the nozzle holder ( 1 ) is formed in the shape of a truncated cone, whereby the face (16) forms a slight conical angle (y) with the top ( 15 ) of the intermediate disk ( 13 ) , causing a concentric sealing edge(D) to be formed around a central interior space of the nozzle holder( 1 ).

Drawings: 5 sheets

Complete Specifications : 12 pages.

341 THE GAZETTE OF INDIA , FEBRUARY 7, 2004 (MAGHA 18 , 1925)

PART III-SEC . 2]

191024 32E

Ind.Cl

C08 F 4/50, 12/08

Int.Ch

A PROCESS FOR PRODUCING AVINYL POLYMER

Title

Applicant :

ASAHI KASEIKABUSHIKI KAISHA , OF 2-6, DOJЛМАНАМА 1- CHOME, KITA- KU, OSAKA, JAPAN

KENJI EBARA

Inventor :

805/CAL/ 1997 FILED ON 05.05.1997

Application no.

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING ( RULE 4, PATENT RULES 2003 ) PATENT OFFICE KOLKATA.

12 CLAIMS.

Aprocess for producing a vinyl polymer selected from a polymer of styrene monomer and polymer of a conjugated diene monomer which comprises carrying out anionic polymerization with a polymerization one or more polymerization initiator (s ) selected from (R2J ) 2Mg R'M ' , R'OM , ROH and ( R3) 2NH under the conditions that

the polymerization temperature is not lower than 45 °C and not higher than 250 °C , and that the concentration of the vinyl monomer selected from a styrene monomer and a conjugated diene monomer based on the polymerization solvent is 45-100%by weight , in which anionic polymerization the metal of the cation forming a counterpart to the carbon anion at the polymerization propagation terminal is Mg, or Mg and M1 is at least one alkali metal selected from the group consisting of Li , Na and K, and the molar concentrations of Mg and M¹ satisfy the relation [Mg ' ]/ [ M ' ] > _4 .

Drawings: 10 sheets

CompleteSpecifications : 69 pages.

6447 GI/2003 342

[PART III-SEC . 2 THE GAZETTE OF INDIA , FEBRUARY 7 , 2004 (MAGHA 18 , 1925)

Ind.Cl

128A

192025 Int.Cl'

B32B 5/02

Title

METHOD OF MAKING HEAT SEALING ADHESIVE BANDAGE AND ADHESIVE BANDAGE MADE BY USING SAID METHOD.

Applicant :

JOHNSON & JOHNSON KABUSHIKI KAISHA , OF 3-2, TOYO 6- CHOME , KOTO - KU, TOKYO 135 , JAPAN.

Inventor :

1. YASUSHI MASHIKO

2. TAKESHI YOSHIDA .

3. TOSHIKAZU SAITO

Application no. 806/ CAL/ 1997 FILED ON 05.05.1997

( CONVENTION NO. 146445/96 FILED ON 17.5.1996 IN JAPAN) .

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING ( RULE 4, PATENT RULES 2003 )

PATENT OFFICE KOLKATA.

6 CLAIMS .

Amethod for making an adhesive - coated sheet material, said Method comprising the steps of:

A. Providing a film of polymeric material;

B. Providing a thermoplastic fiber fabric ;

C. Laminating said film to said fabric to form a laminated sheet material having a fabric surface and film surface; Fig.6

D. Applying a layer of adhesive to said fabric surface of said laminated sheet material ; and

E. Heat- sealing at least a portion of said laminated sheet material in a discontinuous pattern, wherein step E is performed before step D.

Complete Specifications : 17 pages.

Drawings: 2 sheets 343 THE GAZETTE OF INDIA, FEBRUARY 7, 2004 (MAGHA 18 , 1925 )

PART III-SEC . 2]

192026 Ind.Cl :

F28G 1/12

Int.Cl7 :

BALL COLLECTORFOR A DEVICE FOR RETURNING BALLS

Title :

Applicant :

TAPROGGE GMBH, OF SCHLIEMANNSTRASSE 2-14 . 58300 WETTER, GERMANY.

1. SCHINK PETER

Inventor

2. SCHILDMANN HANS - WERNER .

3. WIDJAJA HARTONO .

Applicationno. 1157/CAL/ 1997 FILED ON 18.06.1997 (CONVENTION NO. 29610900.2 FILED ON 21.06.1996 IN GERMANY.)

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING ( RULE 4, PATENT RULES 2003)

PATENT OFFICE KOLKATA.

12 CLAIMS.

Ball collector ( 1 ) for a device for returning balls for cleaning of tubes ( 24 ) of cooling systems operated with fluid , namely water , comprising: a

a casing ( 2 ) subdivided into an upper chamber ( 5 ) with an inlet ( 11 ) for the balls and in a lower chamber ( 6 ) with an outlet ( 19 ) for the balls ;

an opening ( 4 ) provided between the upper and lower chambers ( 5 ; 6) being closable and freeable ;

a strainer screen ( 15 ) placed in the upper chamber ( 5 ) , the upper chamber ( 5 ) being connected to the lower chamber ( 6 ) by a bypass line ( 7 ) having a pump ( 10 ) through which water can be pumped from the upper chamber ( 5 ) into the lower chamber ( 6 ) ;

a flap ( 16 ) for freeing and closing the opening ( 4 ) being constructed and positioned and freely pivotably mounted through the water flow between the open position and the closed position that if the pump ( 10 ) in the bypass line ( 7 ) is switched on the flap ( 16 ) assumes its closed position and when the pump ( 10 ) is switched off its open position

Drawings: 3 sheets

Complete Specifications : 14 pages.

344

THE GAZETTE OF INDIA , FEBRUARY 7, 2004 (MAGHA 18 , 1925 )

[PART III-SEC. 2 Ind.Cl

192027 Int.Cl

C25F 001/06 , 007/00

Title

AN IMPROVED PROCESS FOR PRODUCING FERRITIC STAINLESS STEEL STRIPS OF INCREASED DRAWABILITY AND REDUCED ROPING TENDENCY .

Applicant :

STEEL AUTHORITY OF INDIA LIMITED , OF ISPAT BHAWAN, LODI ROAD , NEW DELHI - 110003.

Inventor

1. CHANDI DUTTA SINGH .

PRITI JHA .

3. BIMAL KUMAR JHA ..

SUDHAKAR JHA .

Application no. 1293/ CAL/ 2997 FILED ON 09.07.1997

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING ( RULE 4, PATENT RULES 2003)

PATENT OFFICE KOLKATA.

1 CLAIM .

An improved process for producing ferritic stainless steel strips of increased drawability and reduced roping tendency by adopting high temperature continuous annealing of the hot rolled strips at a relatively fast rate , along with reduced

energy consumption, characterised in that the process comprises the following steps in sequence:

(a) Annealing in the continuous annealing furnace in the two- phase (a+ y) region at 900-910 OC for 4 minutes hot rolled ferritic AISI - 430 grade stainless steel strips of 4.0 mm thickness and nominal composition (by weight % ) : C - 0.05 , Mn -0.45 , Si - 0.20 , P -0.02 , S- 0.001 , Cr - 16.80 , Ni -0.25 , Mo -0.01 , N -0.03 , Al -0.015 and Fe the balance ;

(b ) Pickling and cold rolling the annealed strips to a thickness of 0.5 mm in two stages .

Complete Specifications : 10 pages,

Drawings: 5 sheets 345 THE GAZETTE OF INDIA , FEBRUARY 7 , 2004 (MAGHA 18, 1925)

PART III-SEC . 2]

192028 :

12A, 12C, 108 C(2)

Ind.Cl

C21D 8/12, C22C 38/02 B22D 11/04

Int.Cl

Title

PROCESS FOR THE PRODUCTION OF GRAIN ORIENTED ELECTRICAL STEEL STRIP HAVING HIGH MAGNETIC CHARACTERISTICS , STARTING FROM THIN SLABS .

Applicant :

ACCIAI SPECIALI TERNI S.P.A. OF VIALE BENEDETTO BRIN 218, 05100 TERNI,, ITALY

1. FORTUNATI STEFANO.

Inventor :

2. STEFANO CICALE .

GIUSEPPE ABBRUZZESE.

Applicationno. VENTI

1375/CAL/ 1997 FILED ON 23.07.1997 (CONVENTION NO. RM96A000600 FILED ON 30.08.1996 IN ITALY. )

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)

PATENT OFFICE KOLKATA .

12 CLAIMS.

Process for the production of high magnetic characteristics silicon steel strip , in which a steel containing , in weight present , 2.5-5 si ,

0.002-0.075 C. 0.05-4 Mn . < 0.015 S. ( or S 0.503 Se ) , 0.010-0.045

a A1 , 0.003-0.0130 N , up to 0.2 Sn , 0.040-0.3 Cu , remaining being iron and minor impurities , is continuously cast , high - temperature annealed , hot rolled , cold rolled in a single step or in plurality of steps with intermediate annealing , the cold rolled strip so obtained is annealed to perform primary annealing and decarburization , coated with annealing separator and box annealed for the final secondary recrystallization treatment , said process being characterized by the combination in cooperation relationship of:

(i) continuously casting a thin slab having a thickness of between a steel 20 and 80 mm with a casting speed of 3 to 5 m/min , overheating at the casting of between 20 and 40 ° C , such a cooling speed as to obtain a complete solidification within 30 to 100 s , a 346

THE GAZETTE OF INDIA , FEBRUARY 7 , 2004 ( MAGHA 18 , 1925)

[PART III-SEC. 2

and an mould oscillation amplitude of between 1 and 10 mm , oscillation frequency of between 200 and 400 cycles per minute ; the above parameters being selected to obtain a percentage of equiaxial grains higher than 25 % ;

( ii ) equalizing the thus obtained slabs at a temperature comprised between 1150 and 1300 ° C ;

( iii ) hot rolling the equalized slabs with a starting rolling temperature of between 1000 and 1200 ° c and a finishing rolling temperature of between 850 and 1050 ° C ;

( iv) continuously annealing the hot rolled strips for 30 to 300 s at a temperature of between 900 and 1170 ° c , cooling the same at a ° C temperature no lesser thạn 850 and maintaining said temperature for 30 to 300 s , and then cooling them possibly in boiling water ;

( v ) cold rolling the strip in a single step or in a plurality of steps with intermediate annealing , the last step being performed with a reduction ratio of at least 80 %;

( vi ) continuously annealing the cold rolled strip for a total time of 100 to 350 s , at a temperature comprised between 850 and 1050 wet nitrogen / hydrogen atmosphere , with a PH20 /pH2 comprised between 0.3 and 0.7 : ° C in a

( vii ) coating the strip with annealing separator , coiling it and box annealing the coils in an atmosphere having the following compositions during the heating - up: hydrogen mixed with at least 30 % vol nitrogen up to 900 ° C , hydrogen mixed with at least 40 % vol nitrogen up to . 1100-1200 ° C , then , maintaining the coils at this temperature in pure

hydrogen .

Complete Specifications : 17 pages.

Drawings: NIL 347 THE GAZETTE OF INDIA , FEBRUARY 7 , 2004 ( MAGHA 18, 1925 )

PART III-SEC . 2]

192029 206 - E

Ind.Cl

H04B 001/005 Η 04B 007/38

Int.Cl'

Title

BEACON . RADIOCOMMUNICATIONS SYSTEMS AND METHODS FOR JITTERED Applicant :

TELEFONAKTIEBOLAGET, L.M ERICSHON, OF S - 126 25 , STOCKHOLM, SWEDEN

JACOBUS CORNELIS HAARTSEN

Inventor :

Application no. 1436/CAL/ 1997 FILED ON 04.08.1997 (CONVENTION NO. 08/708, 039 FILED ON 30.08.1996 IN U.S.A. )

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING ( RULE 4, PATENT RULES 2003)

PATENT OFFICE KOLKATA

16 CLAIMS.

BEGIN

RECEIVE TRANSMITTED BEACON

DERIVÉBASE STATION STATUS

BASE AVAILABLE ?

DERIVE BASE STATION IDENTIFICATION A method for beacon channel transmission timing by a private radiotelephone base station which has an associated identification value, comprising the step of: repeatedly transmitting a radio beacon at jittered time intervals which are calculated based on a predetermined function associated with the base station identification value; and wherein the private radiotelephone base station has a transmission range and wherein the transmitted radio beacons contain the associated identification value and wherein a mobile terminal within the transmission range of the base station performs the

DETERMINE ASSOCIATIED FUNCTION following steps:

SYNCHRONIZE TO BEACON TRANSMISSION TIME receiving one of the transmitted radio beacons;

END deriving the base station identification value from the received radio beacon; and synchronizing to the base station beacon timing based on the predetermined function associated with the identified base station ; and wherein the predetermined function is an encryption function using the base station identification value and a counter number .

Drawings: 11 sheets

Complete Specifications : 28 pages.

348

THE GAZETTE OF INDIA , FEBRUARY 7 , 2004 (MAGHA 18, 1925 )

[PART III-SEC. 2 Ind.Cl

32 I2 (b) (d)

192030 Int.Cl :

C07D 235/04 233/54

Title

AN IMPROVED PROCESS FOR PURIFICATION OF SULFINYL BENZIMIDAZOLES .

Applicant :

TORRENT PHARMACEUTICALS LTD . OF CENTRAL PLAZA . 1ST FLORR, ROOM # - 106, 2/6 SARAT BOSE ROAD , CALCUTTA- 700 020 , WEST BENGAL , INDIA

Inventor :

SUNIL SADANAND NADKARNI.

Application no. 285/ CAL/2002 FILED ON 09.05.2002

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING ( RULE 4, PATENT RULES 2003)

PATENT OFFICE KOLKATA .

10 CLAIMS.

An improved process for the preparation of purified sulfinyl compounds of formula(1) and pharmaceutically acceptable salts thereof,

R2

R

(1)

wherein

R¹ is -CH2-Aг

Ar is selected from mono substituted, disubstituted or trisubstituted aryl or

heteroaryl ring, wherein aryl is a phenyl ring and heteroaryl is a pyridyl ring and substituents.are independently selected from the group consisting of:

a) hydrogen,

b) C -Ca-alkyl ,

C) C3 -C8 -cycloalkyl,

d) C2 -Ca -halogenated alkyl ,

e) C1 -Ca -alkyloxy and

f) --(CH2) -O- alkyl (C1 -Ca) ;

where n is 1 to 5.

R2, R³ and R may be the same or different selected from the group consisting of a) hydrogen

b) Cr -Ca -alkyl,

c) C3 -C -cycloalkyl , 349 THE GAZETTE OF INDIA , FEBRUARY 7, 2004 ( MAGHA 18, 1925)

PART III-SEC . 2]

192030

d) C2-Cs-halogenated alkyl,

e) C1 -Cs- alkyloxy,

f) C -Ca-halogenated alkyloxy,

g) C1 -Ca-alkyloxy carbonyl,

h) carbonyl and

i) halogen

YisCH or N;

which comprises the steps of,

1 (a)treating the crude sulfinyl compound of formula (1)-as defined above contaminated

k with sulfone impurities represented by formula (III)

( III)

wherein R' , R2 , R³ and R' have the meaning as defined above.

with an amine such as herein described, in the presence of an organic solvent such as herein described, at a temperature of 15°C to 35° C and

(b)washing the reaction mixture ofstep (a) above with water to remove said sulfone impurities and obtain the purified sulfinyl compound of formula (1)

Drawings: NIL

Complete Specifications : 19 pages .

7-447GI/2003 350

THE GAZETTE OF INDIA, FEBRUARY 7, 2004 (MAGHA 18 , 1925)

[PART III-SEC. 2 RESTORATION UNDER SECTION 60 OF THE PATENTS ACT, 1970

Notice is hereby given that an application for restoration of Patent No. 181917 made by Goldstar Co. Ltd. on 27.09.2002 has been allowed and the said Patent is restored.

Notice is hereby given that an application for restoration of Patent No. 183675 made by SKF Engineering Research Centre B. V. on 30.09.2002 has been allowed and the said Patent is restored.

NOTIFICATION UNDER SECTION 20 ( 1 )

In pursuance of leave granted Under Section 20 ( 1 ) of the Patents Act, 1970 application No. 1016/Del/93 (188185) of Imperial Chemical Industries Plc, a British Company of Imperial Chemical House , Millbank , London SWIP 3JF, England, has been allowed to proceed in the name of INEOS FLUOR HOLDINGS LIMITED, a British Company of First Floor Offices , Queens Gate , 15-17 Queens Terrace, Southampton, Hampshire, SO14 3BP, United Kingdom.

AMENDMENT PROCEEDINGS UNDER SECTION 57

In pursuance of leave granted Under Section 57 of the Patent Act, 1970 application No. 2758 /Del / 97 ( 187299 ) of Council of Scientific and Industrial Research, Rafi Marg , New Delhi - 110 001 , India, an Indian registered body incorporated under the Registration of Societies Act (XXI of 1860) has been allowed to amend in the Complete Specification on pages No. 5 & 10 sub Para (c) a pressure of 50-100 gm/cm2 .

In pursuance of leave granted Under Section 57 of the Patents Act, 1970 application No. 577 /Del /98 ( 187909) of Zeneca Limited, a British Company of 15 Stanhope Gate, London WIY 6LN, England has been allowed to proceed in the name of Syngenta Limited, European Regional Centre, Priestley Road, Surry Research Park, Guildford, Surrey GU2 7YH, England.

In pursuance of leave granted Under Section 57 of the Patents Act, 1970 application No.1016/Del/93 ( 188185 Ineos Flour Holdings Limited, a British Company of First Floor Offices, Queens Gate, 15-17 Queens Terrace , Southampton , Hampshire SO 14 3BP, United Kingdom. The new address for service as M/s . Remfry & Sagar , Remfry House at the millennium Plaza Sector 27, Gurgaon- 122002 National capital Region India has been allowed

Notice is hereby given that De Nora Seaclor Srl . Of Via Bistolfi 35, 20134 Milan , Italy, an Italian company have made an application under Section 57 of the Patents Act, 1970 for amendment of the name of Patentee in respect of their Application for Patent No. 179815 for the invention relating to AN ALKALI METAL HYPOCHLORITE GENERA- TION STORAGE UNIT. The amendments are by way of correction. The application for amendment and the proposed amendments can be inspected free of charge at the Patent Office, 5th, 6th & 7th Floors , 2nd MSO Building, Nizam Palace , 234/4, Acharya Jagadish Chandra Bose Road, Kolkata- 700 020. Copies of the same can be had on payment of the usual copying charges . Any person interested in opposing the application for amendment may file Notice of Opposition on prescribed Form - 14 within three months from the date of Notification at the Patent Office, Kolkata . If the written Statement of Opposition is not filed with the Notice of Opposition, it shall be left within one month from the date of filing the said Notice.

Notice is hereby given that CANON KABUSHIKI KAISHA , a Japanese Company. Of 3302, Shimomaruko, Ohta-Ku , Tokyo, Japan have made an application under Section 57 of the Patents Act , 1970 for amendment of application and application of their application for Patent No. 0685/MAS/ 1993 ( 184011 ) " APPARATUS FOR CONTAINING INK AND SUPPLYING TO AN INK JET RECORDING HEAD" . The amendments are by way of correction . The appli- cation for amendment and the proposed amendments can be inspected free of charge at the Patent Office, C Wing, C- 4-A, III Floor, Rajaji Bhavan, Besant Nagar, Chennai -600 090. , or copies of the same can be held on payment of the usual copying charges . Any person interested in opposing the application for amendment may file Notice of Opposition on prescribed Form - 14 within 90 days from the date of a Notification at the Patent Office Branch, Chennai -90 . If the written Statement of Opposition is not filed with the Notice of Opposition it shall be left within one month from the date of filing the said Notice .

Notice is hereby given that FORTUM OIL AND GAS OY, of Keilaniemi , Fin -02150, Espoo , Finland, A Finnish Joint Stock Company have made an application under Section 57 of the Patents Act, 1970 for amendment of the name ofPatentee in respect of their Application for Patent No. 19027 for the invention relating A PROCESS FOR PREPARING TERTIARY ALKYL ETHERS. The amendments are by way of correction . The application for amendment and the PART III-SEC . 2 ]

THE GAZETTE OF INDIA , FEBRUARY 7 , 2004 ( MAGHA 18 , 1925)

351 proposed amendments can be inspected free of charge at the Patent Office , 5th, 6th & 7th Floors , 2nd MSO Building, Nizam Palace, 234/4, Acharya Jagadish Chandra Bose Road, Kolkata- 700 020. Copies of the same can be had on payment of the usual copying charges . Any person interested in opposing the application for amendment may file Notice of Opposition on prescribed Form - 14 within three months from the date of Notification at the Patent Office , Kolkata . If the written Statement of Opposition is not filed with the Notice of Opposition, it shall be left within one month from the date of filing the said Notice.

RENEWAL FEES PAID ( DELHI 01-08-2003 ΤΟ 30-09-2003 )

179795 180173 184411 184412 185369 187018

177745

177119 176606 187231 187413 186891 186117

187294

187293

187085 187089 186962 186986

186821

186735

186535 186537 186246 186398

186213

187012 176028

188574 187080 172732 183431

176026

179536

184963 176725 185712 184832

187341

175183 175206 185886 174936

188330 188419

185749

185714 185715

185747

185731 185733 185713

188501 188504 178939

188467 188469 188470

188465

186455 184574 184496

186338 186430 186454

186302

188535 188579 188040 188573 188531

187942

175025 186291

180184

176145

188034 188033 176160

185274 185597 185891

184835 184838 184839

184577

186320 185591 176721 176173 176556

184898

187301

183946 184696 184767 184769 187300 176882

174910 174940 175147 175609 175726 174813

185710

186967 185709

185801 186239 185329

187035 186878 186902 187019 187020 186877

185600 187415 188032 188759 178688

188711

186540 186560 186458 186459

186457

188680

187414 188029 180564 187222 187227

176867 187326 187396 188464

186429 186038

187342. 186140 186212 187299 187329

174389 181297 186089 174638

186736 186784

188572 188618 188537 188509 188575

185907 188259 185324 185586

184575 184598

185645 185650

185572

176424. 176425 184953

188463 185502 185648 186482 188030

186074 186144 186247 185892 185996

186965 185888 186456 187362 185.708

184840 184302 176405 181298

188614 174487

180897 188025 184238 187086 176430

176873 175436 176264 176605

186524

176417 176724 187956 176176 176410

185887

187315 187316 187343 187352 174811

184876 184569 184954

175727 175810 176175

185594 184415 187928

187512

177442

187513

187295 188791 188764

187036 187087 187232

188670 188672 188677

188578

188662

188611

186876 187425 186738 186808 186810

186737

188668 188681

186039186800

188675 184733 184593 185716 188024

185023

188761 188673 183780 177444 184369 188686

188806 188810 188793 188795 188797

188763

188580 172049 185885 180186 185377

184857

185704 188540 188503 188413 188417

188412

188687 188770 187418 177045 184370

188616

188690 188186 185510 188689

188688

188683

186386 187917 187228 185300 187402

186834

184497

185740 187920 184602 186601

180724

188757 183051 .

187416

187945 187888 188380

188502 185642 188186 180198 186809

187912 187913 188827 175722 180204

188824

188375 188378 188329 188331 188332

176423

188580

188577

188539

188534

188532

188538

188667

188663 188666

188661

185889 188270

187366

185890 188573

185900

185328

178173

179775 179776

187365 186781 186835 180203

180181 183052 185894 185896

187916 187239

PATENT SEALED ON 09-01-2004 (KOLKATA )

190199 190202 190204 190206 190208 190209 190210 190211 190212 190213 190215 190216 190217 190218 190220 .

KOL- 15 .

[PART III-SEC . 2 352

THE GAZETTE OF INDIA , FEBRUARY 7, 2004 ( MAGHA 18, 1925 )

REGISTRATION OF DESIGNS

The following designs have been registered . They are open for public inspection from the date of registration . ( Colour combination if any , is not shown in the representation)

The dates shown in the following each entry is the date of registration .

Class 01-01 No.192698 . HINDUSTAN LEVER LIMITED OF HINDUSTAN LEVER HOUSE , 165/166 , BACKBAY RECLAMATION , MAHARASHTRA , 30.07.2003 020, MUMBAI : -400 INDIA. " ICE CREAM"

Class 08-08 No.192182 . TAPARIA TOOLS LIMITED , AT 423- 424/A - 2 SHAH & NAHAR, LOWER PAREL (W), MUMBAI : -400 013 , MAHARASHTRA , INDIA. " SOCKET" 26.05.2003 .

Class 03-01 No.192454 . V.I.P. INDUSTRIES LIMITED , OF DGP HOUSE , 88- C OLD PRABHADEVI ROAD , MUMBAI : -400 025 , MAHARASHTRA , INDIA. " SUITCASE " 25.06.2003

Class 03-01 No.192456. V.I.P. INDUSTRIES LIMITED , OF DGP HOUSE, 88 -C OLD PRABHADEVI ROAD , MUMBAI : -400 025 , MAHARASHTRA, INDIA. "HANDBAG " 25.06.2003 353 THE GAZETTE OF INDIA , FEBRUARY 7 , 2004 (MAGHA 18, 1925)

PART III- SEC . 2 ]

03-01

Class

No.192457 . V.I.P. INDUSTRIES LIMITED , OF DGP HOUSE , 88- C OLD PRABHADEVI ROAD , MUMBAI : -400 025, MAHARASHTRA, INDIA. " SUITCASE " 25.06.2003

03-01

Class

No.192459. V.I.P. INDUSTRIES LIMITED , OF DGP HOUSE , 88 - C OLD PRABHADEVI ROAD , MUMBAI : -400 025 , MAHARASHTRA , INDIA . " SUITCASE " 25.06.2003

03-01

Class

No.192458. V.I.P. INDUSTRIES LIMITED , OF DGP HOUSE , 88-C OLD PRABHADEVI ROAD , MUMBAI : -400 025, MAHARASHTRA, INDIA . " SUITCASE " 25.06.2003

03-01

Class

No.192455 . V.I.P. INDUSTRIES LIMITED , OF DGP HOUSE , 88- C OLD PRABHADEVI ROAD , MUMBAI : -400 025, MAHARASHTRA , INDIA. "SUITCASE" 25.06.2003

09-01

Class

No. 192031. THE HIMALAYA DRUG COMPANY OF MAKALI, BANGALORE- 562123 , "BOTTLE" 02.05.2003 . INDIA.

8447 G1/2003 354

THE GAZETTE OF INDIA , FEBRUARY 7, 2004 (MAGHA 18, 1925)

[PART III-SEC . 2 Class 05-05

No.192153 . THE RISHABH VELVELEEN LIMITED, OF 9TH KM , HARDWAR- DELHI ROAD, NEAR RANIPUR TOLL BARRIER, JWALAPUR, HARDWAR: 249 407 , U.P. , INDIA . " TEXTILE FABRIC" 12.05.2003

Class 03-04

No.192461 . THE JAY ENGINEERING WORKS LTD . OF 19 , KASTURBA GANDHI MARG, NEW DELHI- 110001 , INDIA. " ELECTRIC FAN" 23.06.2003.

Class 09-03 No.192335. LOKNATH PLASTIC INDUSTRIES OF 31 /Α/3 , ΜΑΝΝA OARA ROAD , KOLKATA- 700090, WEST BENGAL, INDIA. " CONTAINER WITHOUT LID " 12.06.2003.

Class 09-03

PACKAGING

No. 192237.ALMAR INTERNATIONAL INC. OF 44, WORSHIP STREET, LONDON, EC2A 2JT, UNITED KINGDOM. " FLEXIBLE CONTAINER " 02.12.2002 (Reciprocity, Repub , ic of South Africa)

Class 10-05 No.192035. SANJEEV KHOSLA AND AARTI KHOSLA, BOTH INDIAN NATIONALS OF S- 158, GREATER KAILASH PART - II , NEW DELHI : -110 048 , INDIA. " SIGNAL CURRENT " 15.05.2003 355 THE GAZETTE OF INDIA, FEBRUARY 7, 2004 (MAGHA 18, 1925 )

PART III SEC . 2]

09-03

Class

No.192097 . MITESH METAL INDUSTRIES, B-5, OM SAI ESTATE, BHAYANDER MAHARASHTRA, 12.05.2003 GODDEV FATHAK ROAD , THANE, DIST. "CONTAINER " (Ε) , INDIA.

28-01

Class

No.192709. M/S . CIPLA LIMITED , AT 289 , BELLASIS ROAD, MUMBAI CENTRAL, MUMBAI- 400 008, MAHARASHTRA , INDIA. " MULTIDOSE INHALATION DEVICE " 31.07.2003 .

99-00

Class

No.188850 . JITENDRA SINGH BIAS , C/O. SANJOY SINGH, H/52 , BARGI HILLS COLONY, JABALPUR 482 002, (Μ.Ρ. ), INDIA, AN INDIAN NATIONAL . " TUBEWELL , PIPELIFTER " 26.04.2003

99-00

Class

COLONY, No.188851 . JITENDRA SINGH BIAS , C/O . SANJOY SINGH, H/52 , BARGI HILLS JABALPUR 482 002, (Μ.Ρ. ) , INDIA, AN INDIAN NATIONAL 26.04.2003 "TUBEWELL , PIPE LIFTER "

12-13

Class

No.190911 . EROS METAL WORKS PVT . LTD . , AT G-5 , M.I.D.C. INDL. AREA , NAGPUR: 440028, MAHARASHTRA, INDIA . " GARBAGE VEHICLE" 07.01.2003 .

THE GAZETTE OF INDIA , FEBRUARY 7 , 2004 ( MAGHA 18, 1925 )

[PART III-Soc . 2 Class 12-13

No.190912 . EROS METAL WORKS PVT . LTD . , AT G-5, M.I.D.C. INDL . AREA, NAGPUR: 440028 , MAHARASHTRA, INDIA . " GARBAGE VEHICLE " 07.01.2003 .

Class 07-02

No.191656 . NILKAMAL CRATES AND BINS OF 77/78 NILKAMAL HOUSE, ROAD NO.13/ 14, Μ.Ι.- D.C. , ANDHERI EAST , MUMBAI : -400093, MAHARASHTRA, INDIA, " LID " 27.03.2003

Class 09-01

No.192098 . MITESH METAL INDUSTRIES, B-5, OM SAI ESTATE , GODDEV FATHAK ROAD , BHAYANDER (Ε) , DIST. THANE , MAHARASHTRA , INDIA. " CONTAINER " 12.05.2003

Class 28-03

No.192629. VINAY JITENDRA VAKIL OF T.V. TECHNOPLAST OF 28- C, GOVERNMENT INDUSTRIAL ESTATE , CHARKOP, KANDIVALI (W) , MUMBAI - 400067 , MAHARASHTRA, INDIA . " COMB " 22.07.2003 .

Class 06-06

No.192176 . HYUK KOO PARK, 801-801 BYUCKSAN - HANSUNG APT. , 1267 KWONSUN - DONG , KWONSUN - GU SUWON - SI, KYUNGGI- DO, REPUBLIC OF KOREA, "CHAIR" 22.05.2003 357 THE GAZETTE OF INDIA, FEBRUARY 7, 2004 ( MAGHA 18 , 1925 )

P'ART III SEC. 2]

19-06

Class

No.192136 . TODAYS WRITING PRODUCTS LIMITED, OF 251/2/2 VALSAD FALIA, NEAR JAIN TEMPLE , DADRA 396230, D & NH INDIA. "WRITING (U.T. ) INSTRUMENT " 20.05.2003.

05-05

Class

RISHABHTHE VELVELEEN No.192971. LIMITED, OF 9TH KM, HARDWAR -DELHI ROAD , NEAR RANIPUR TOLL BARRIER, JWALAPUR , HARDWAR: - 249 407, U.P. , INDIA . " TEXTILE FABRIC " 21.08.2003

09-02

Class

No.192745 . M/S. PURE GANGA WATER SYSTÉMS PVT . LTD. , AN INDIAN COMPANY, 5, ISHWAR NAGAR, LOWER GROUND FLOOR, NEW DELHI . " WATER TANK " 05.08.2003.

22-06

Class

OF , 11, No.192319 . FUMAKILLA LTD . , KANDAMIKURACHO , CHIYODA- KU, TOKYO , JAPAN . " INSECT REPELLING APPARATUS" 27th December 2002 (Reciprocity , Japan) .

22-06

Class

OF , 11 , No.192318 . FUMAKILLA LTD. , KANDAMIKURACHO , CHIYODA-KU , TOKYO , INSECT JAPAN. " CARTRIDGE FOR REPELLING APPARATUS " 16th December 2002 (Reciprocity, Japan).

358

THE GAZETTE OF INDIA , FEBRUARY 7 , 2004 (MAGHA 18, 1925)

[PART III-SEC . 2 Class 22-06

11, Noi.192317 . FUMAKILLA LTD ., OF KANDAMIKURACHO, CHIYODA- KU, TOKYO , JAPAN . " INSECT REPELLING APPARATUS" 13th December 2002 (Reciprocity, Japan).

Class 05-05

No.192969 . THE RISHABH VELVELEEN LIMITED, OF9TH KM, HARDWAR- DELHI ROAD, NEAR RANIPUR TOLL BARRIER, JWALAPUR , HARDWAR: -249 407, U.P. , INDIA. " TEXTILE FABRIC" 21.08.2003 .

Class 13-04

No.192016. KHAITAN ( INDIA) LIMITED , AN INDIAN COMPANY OF 46C, JAWAHAR LAL NEHRU ROAD , KOLKATA: -700 071, W.B. , INDIA. " CEILING FAN" 30.04.2003

Ciass 03-04

No. 192460. THE JAY ENGINEERING WORKS LTD . , AN INDIAN COMPANY OF 19 , KASTURBA GANDHI MARG , NEW DELHI : -110 001 , INDIA. " ELECTRIC FAN" 23.06.2003

Class 05-05

No.192970 . THE RISHABH VELVELEEN LIMITED , OF9TH KM, HARDWAR- DELHI ROAD , NEAR RANIPUR TOLL BARRIER, JWALAPUR, HARDWAR: - 249 407 , U.P. , INDIA.. " TEXTILE FABRIC " 21.08.2003 .

359 THE GAZETTE OF INDIA , FEBRUARY 7, 2004 ( MAGHA 18 , 1925)

PART III-SEC . 2]

19-06

Class

No.192124. AGNI PEN & PLASTIC (P) LTD. , AN INDIAN COMPANY, OF 8B , LANSDOWNE PLACE, KOLKATA : -700029 , W.B . , INDIA. " PEN" 19.05.2003

06-01

Class

No.192102. NILKAMAL PLASTICS LTD . , OF SURVEY NO.- 354/2 & NEAR 354/3, RAKHOLI BRIDGE, SILVASSA- KHANVEL ROAD, VILLAGE VASONA, SILVASSA(D & N.H. ), (U.T. ) , INDIA, INDIAN COMPANY. " CHAIR" 12.05.2003

06-01

Class

354/3, NEAR No.192101 . NILKAMAL PLASTICS LTD . , OF SURVEY ΝΟ. -354/2 & RAKHOLI BRIDGE , SILVASSA -KHANVEL ROAD, VILLAGE VASONA, SILVASSA(D & N.H. ), (U.T.), INDIA, INDIAN COMPANY. "CHAIR " 12.05.2003

Dr. S. N. MAITY

Controller General of Patents , Designs & Trade Marks प्रबन्धक , भारत सरकार मुद्रणालय , फरीदाबाद द्वारा मुद्रित एवं प्रकाशन नियंत्रक , दिल्ली द्वारा प्रकाशित, 2004

PRINTED BY THE MANAGER, GOVERNMENT OF INDIA PRESS, FARIDABAD AND PUBLISHED BY TE CONTROLLER OF PUBLICATIONS , DELHI , 2004