REGISTERED No. DL (N)-04/0007/2003-054 रजिस्ट्री सं. डीएल ( एन )-04/0007/2003-05
जयते भारत का राजपत्र The Gazette of India
साप्ताहिक/WEEKLY
प्राधिकार से प्रकाशित
PUBLISHED BY AUTHORITY
नई दिल्ली, फरवरी 21 फरवरी 27, 2004 ( फाल्गुन 2, 1925 )
सं० 8]
NEW DELHI , SATURDAY, FEBRUARY 21 - FEBRUARY 27 , 2004 (PHALGUNA 2, 1925)
No. 8]
इस भाग में भिन्न पृष्ठ संख्या दी जाती है जिससे कि यह अलग संकलन के रूप में रखा जा सके । (Separate paging is given to this Part in order that it may be filed as a separate compilation)
भाग III-खण्ड 2
[ PART III -SECTION 2 ]
[पेटेन्ट कार्यालय द्वारा जारी की गई पेटेन्टों और डिजाइनों से सम्बन्धित अधिसूचनाएं और नोटिस) [Notifications and Notices Issued by the Patent Office relating to Patents and Designs ] THE PATENT OFFICE PATENTS AND DESIGNS
2. PatentOffice Branch , W-5, West Patel Nagar , New Delhi -110008 .
Kolkata, the 21st February 2004
The States of Haryana, Hintachal Pradesh,
ADDRESSES AND JURISDICTIONS OF THE OFFICES OF THE PATENTS OFFICE
Jammu and Kashmir, Punjab , Rajasthan , Uttar Pradesh and Delhi and the Union Territory of Chandigarh .
The Patent Office has its Head Office at Kolkata and Branch Offices at Mumbai , Delhi and Chennai having Territorial Jurisdiction on a Zonal basis as shown below:-
Telegraphic Address "PATENTOFIC " Phone Nos . (011 ) 2587 1255 , 2587 1256 , 2587 1257, 2587 1258 .
FaxNo. (011 ) 2587 1256 . E-mail: [email protected]
I. Patent Office Branch, Todi Estates , IIIrdFloor, SunMill Compound, LowerParel (West) , Mumbai-400013 .
3. Patent Office Branch,
GunaComplex, 6th Floor, Annex -II, 443, Annasalai, Teynampet, Chennai -600018 .
The States of Gujarat, Maharashtra , Madhya Pradesh and Goa and the Union Territories ofDaman and Diu& Dadra and NagarHaveli.
Telegraphic Address " PATOFFICE "
Phone Nos . (022) 2492 4058, 2496 1370, 2492 3684, 24903852
FaxNos. (022) 2495 0622, 2490 3852
The States of Andhra Pradesh, Karnataka, Kerala, Tamil Nadu and Pondicherry and the Union Territories of Laccadive, Minicoy and Aminidivi Islands .
E-mail:[email protected]
(489)
1-467GI/2003 490
[PART III-SEC . 2 THE GAZETTE OF INDIA, FEBRUARY 21 , 2004 (PHALGUNA 2, 1925)
Telegraphic Address "PATENTOFFIC "
FaxNos .(033)2247 3851 , 2240 1353 .
PhoneNos .(044) 2431 4324/4325/4326.
E-mail. patentin @ vsnl.com
FaxNos. (044) 2431 4750/4751.
patindia@ giasc101.vsnl.net.in.
E-mail . patentchennai @vsnl . net
Website:http: /Ipindia.nic.in
4. Patent Office (HeadOffice), Nizam Palace, 2nd M.S.O. Building , 5th , 6th & 7th Floor, 234/4, Acharya Jagadish Bose Road, Kolkata-700020 .
Allapplications, notices, statements or other documents orany fees required by the Patents Act, 1970 and the Patents (Amendment) Act, 2002 or by the Patents Rules, 2003 willbe received only at the appropriate offices of the Patent Office.
Rest of India.
Telegraphic Address "PATENTS" PhoneNos . (033 ) 2247 4401/4402/4403.
Fees: The fees may either be paid in cash or may be sent by Bank Draft or Cheques payable to the Controller ofPatents drawn on a scheduled Bank at the place where the appropriate office is situated.
पेटेंट कार्यालय
एकस्व तथा अभिकल्प कोलकाता, दिनांक 14 फरवरी 2004
3. पेटेंट कार्यालय शाखा, गुना कम्प्लेक्स, छठा तल , एनेक्स- II, 443, अन्नासलाई , तेनामपेट, चेन्नई - 600 0181
पेटेंट कार्यालय के कार्यालयों के पते एवं क्षेत्राधिकार
पेटेंट कार्यालय का प्रधान कार्यालय कोलकाता में अवस्थित है तथा मुम्बई, दिल्ली एवं चेन्नई में इसके शाखा कार्यालय हैं , जिनके प्रादेशिक क्षेत्राधिकार जोन के आधार पर निम्न रूप में प्रदर्शित हैं:--
आन्ध्र प्रदेश, कर्नाटक, केरल, तमिलनाड्डु तथा पाण्डिचेरी राज्य क्षेत्र एवं संघ शासित क्षेत्र लक्षद्वीप , मिनिकाय तथा एमिनिदिवि द्वीप । तार पता - " पेटेंटोफिक"
फोन: (044) 2431 4324/4325/4326.
फैक्स: (044 ) 2431 4750/4751 .
ई. मेल: [email protected]
1. पेटेंट कार्यालय शाखा, टोडी इस्टेट, तीसरा तल , सन मिल कम्पाउंड, लोअर परेल (वेस्ट) , मुम्बई - 400 013 ।
4. पेटेंट कार्यालय ( प्रधान कार्यालय ) , निजाम पैलेस, द्वितीय बहुतलीय कार्यालय भवन, 5वां, 6ठा व 7वां तल, 234/4, आचार्य जगदीश बोस मार्ग, कोलकाता- 700 0201
गुजरात , महाराष्ट्र, मध्य प्रदेश तथा गोआ राज्य क्षेत्र एवं संघ शासित क्षेत्र, दमन तथा दीव एवं दादर और नगर हवेली।
भारत का अवशेष क्षेत्र ।
तार पता: " पेटयेफिस"
फोन:(022) 2492 4058 , 2496 1370, 2492 3684, 2490 3852
तार पता-" पेटेंट्स "
फैक्स: ( 022) 2495 0622, 2490 3852
फोन: (033) 2247 4401/4402/4403 .
ई. मेल: [email protected]
फैक्स: (033 ) 2247 3851 , 2240 1353 .
ई. मेल: [email protected]
2. पेटेंट कार्यालय शाखा,
वेब साइट : http./Ipindia.nic.in
डब्ल्यू-5 , वेस्ट पटेल नगर, नई दिल्ली 1100081
हरियाणा, हिमाचल प्रदेश , जम्मू तथा कश्मीर, पंजाब, राजस्थान, उत्तर प्रदेश तथा दिल्ली राज्य क्षेत्रों एवं संघ शासित क्षेत्र चंडीगढ़ ।
पेटेंट अधिनियम , 1970 तथा पेटेंट ( संशोधन ) अधिनियम, 2002 अथवा पेटेंट नियम , 2003 द्वारा अपेक्षित सभी आवेदन , सूचनाएं, विवरण या अन्य दस्तावेज या कोई फीस पेटेंट कार्यालय के केवल समुचित कार्यालय में ही ग्रहण किए जाएंगे ।
तार पता : " पेटेंटोफिक"
फोन: ( 011 ) 2587 1255 , 2587 1256, 2587 1257, 2.587 1258 .
फैक्स:(011 ) 2587 1256.
ई. मेल: [email protected]
शुल्क : शुल्कों की अदायगी या तो नकद की जाएगी अथवा जहां उपयुक्त कार्यालय अवस्थित हैं, उस स्थान के अनुसूचित बैंक से नियंत्रक, पेटेंट को भुगतान योग्य बैंक ड्राफ्ट अथवा चैक द्वारा की जा सकती है। 491 THE GAZETTE OF INDIA, FEBRUARY 21 , 2004 (PHALGUNA 2, 1925)
PART III-SBC . 2]
THE PATENT OFFICE
NIZAM PALACE
2ND M.S.O BUILDING , 5T , 6TH & 7TH FLOOR
234/4 , ACHARYA JAGADISH CHANDRA BOSE ROAD , CALCUTTA - 700020, INDIA
(91 )(33)247 44 1.2474402,
Telephone :
Gram: ' PATENTS '
247 4403 .
CALCUTTA
Fax No.: (91 ) (33)247.31 1,240 1353.
E-mail : patindia@gia 01.vsnl.net.in
patentin@van com
Dated: 5th Js uary , 2004.
No .: A-45011/1/2002-Admn .
LIST OF HOLIDAYS FOR THE YEAR - 2004
Days oftheweek
Month&date
Sl.No. Holidays & connectedfestival
Monday
January, 26
Republic Day.
01.
Monday
February, 02
Idu Z Zuha (Bakrid)
02.
Tuesday
March, 02
Muharram
03.
Tuesday
March, 30
RainNavami
04.
Saturday
April, 03
05. Mahavir Jayanti
Friday
April, 09
1.116. Good Friday
Sunday
May, 02
07. Prophet Mohanimed's Birthday (Id-E-Milad)
Tuesday
Μαγ. 04
Buddha Purnima
08.
Sunday
August, 15
09. IndependenceDay
Tuesday
September, 07
10. Janmashtami
Saturday
October,02
11. Mahatma Gandhi's Birthday
Thursday
October, 21
12. Additional da for Dussehra (Maha Askami
Friday
October, 22
13. Dussehra (Vijaya Dashami)
Friday
November, 12
14. Diwali (Deepavali)
Monday
November, 15
IdulFitr
15.
Friday
November, 26
Guru Nanak's Birthday
16.
Saturday
December 25
17. Christmas Day
Note:CentralGavernment Organizations which include Industrial Comnercial and Trading Establishment (i.e. other than doing work of secretariat nature
taken would observe 17 holidays in a year out ofwhich 3 (three), via,Republic Day, Independe be and Mahatma Gandhi's Birthday willbe compulsory. The remaining 14 (fourteen) occasions determined by such establishments/organizations themselves on year to year basis . The holidaysfor the Muslim Festivais may be change on sighting ofthe Moon and decision to "bythe StateGovernment. ray be nies of
1802
SETH$ 1/2004
(N.R. DEPUTY CONTROLLER OF PATENTS &
DESIGNS AND HEAD OF OFFIC 492
THE GAZETTE OF INDIA , FEBRUARY 21 , 2004 (PHALGUNA 2, 1925)
[PART III-SEC. 2
CORRIGENDUM
In the Gazette of India , Part III , Section 2 dated 29.03.2003 in respect of Patent No. 189551 (Application No 310 /BOM/ 1997) . Please delete " Patent of Addition to 17 /BOM/ 1996 dated 10.01.1996" .
CORRIGENDUM
In the Gazette of India , Part III , Section 2 dated 19.04.2003 in respect of Patent No. 189794 (Application No. 377 /BOM/ 1997) . Please be deleted " Priority No. 962018727 , EP 06.07.1996 " .
Alteration of Date
Patent No. 192109 1318/MAS/97 Ante-Dated to 26th May, 1993
Patent No. 192110 817/MAS/2000 Ante- Dated to 11th Sept. , 1994.
अभिगृहित पूर्ण विनिर्देश
एतद्वारा सूचना दी जाती है कि आवेदनों में किसी पर पेटेंट अनुदान का विरोध करने वाले इच्छुक व्यक्ति राजपत्र के इस निर्गमन की तिथि से चार महीने के भीतर या उक्त चार महीने की समाप्ति के पूर्व , प्ररूप 4 में यदि आवेदित किया हुआ हो , तो परवर्ती एक महीने के भीतर, किसी समय , नियंत्रक, पेटेंट को ऐसे विरोध की सूचना प्ररूप 7 में उपयुक्त कार्यालय में दे सकते हैं । विरोध का लिखित कथन साक्ष्य के साथ , यदि कोई हो, दो प्रतियों में उक्त सूचना के साथ या अगले दो महीने की अवधि के भीतर दाखिल किया जाए । इस संदर्भ में , यथा संशोधित पेटेंट अधिनियम , 1970 की धारा 25 एवं पेटेंट नियम, 2003 के नियम 55 से 57 का अवलोकन किया जा सकता है । उपयुक्त कार्यालय द्वारा विनिर्देश एवं चित्र आरेख, यदि हो, के छायाप्रति की आपूर्ति छायाप्रति शुल्क के रूप में प्रति पृष्ठ रु. 4/- की अदायगी पर की जा सकती है ।
COMPLETE SPECIFICATION ACCEPTED
Notice is hereby given that any person interested in opposing the grant of a Patent on any of the Applications , may, at any time within four months from the date of this issue of Gazette or within further period of one month if applied for in Form 4 before the expiry of the said period of four months, give notice to the Controller of Patents at the Appropriate Office on Form 7 of such opposition. The Written Statement of Opposition accompanied by evidence , if any, should be filed in duplicate alongwith the said notice or within further period of two months . Section 25 of The Patents Act, 1970 as amended and Rules 55 to 57 of The Patents Rules, 2003 may be referred to in this regard .
Photo copies of the specification and drawings , if any, can be supplied by the Appropriate Office on payment of photocopying charges @ Rs . 4/ - per page.
493 THE GAZETTE OF INDIA, FEBRUARY 21 , 2004 (PHALGUNA 2, 1925 )
PART III-SEC. 2]
192081
77 C
:
IND . CL .
C 07 C - 29/ 74
:
INT . CL .
:
TITLE
PROCESS FOR PRODUCING UNSATURATED FATTY ALCOHOLS FROM LAURIC OILS .
:
APPLICANT
DHW DEUTSCHE HYDRIERWERKE GMBH , RODLEBEN OF BRAMBACHER WEG 1 D - 06862 RODLEBEN , GERMANY, GERMAN COMPANY .
1. FRANK WIECZOREK
INVENTOR
2. GERHARD KONETZKE
3. EKKEHARD SEIFERT
_DATED
INTERNATIONAL APPLICATION NO :
108 BOM 1999 DATED 11.02.1999
:
INDIAN
APPLICATION NO .
PRIORITY NO.
19810440.5 DATED 11.03.1998 OF GERMANY
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4, PATENTS RULES 2003 ), PATENT OFFICE BRANCH , MUMBAI - 13.
09 CLAIMS
Aprocess for producing unsaturated fatty alcohols from lauric oil comprising the following steps:
(a) The deacidified lauric oil are converted to esters interchange with methanol oil into fatty acid methyl esters mixture .
(b) fractionating fatty acid methyl ester mixture of step as to separate into a C12-C16 -methyl ester mixture and unsaturated C18 methyl esters;
fractionated crystallization to separate saturated C18 methyl ester cake;
(c)
(d
) selective hydrogenation of unsaturated C18 methyl ester to obtain unsaturated fatty alcohol;
(
e) subjecting to distillatory purification of the cruds unsaturated fatty alcohol to obtain pure unsaturated fatty alcohol .
Drawings: Nil
Comp.specn . 21 pages 494
[PART III-SBC. 2 THE GAZETTE OF INDIA, FEBRUARY 21 , 2004 (PHALGUNA 2, 1925)
192082
31 B
:
IND . CL .
: G 06 F. 17/00
INT . CL .
:
TITLE
A DEVICE FOR TRANSDUCTION OF SPATIALLY AND TEMPORALLY PATTERNED SIGNALS ONTO AND /OR FROM ORAL SURFACE .
:
APPLICANT
TATA INSTITUTE OF FUNDAMENTAL RESEARCH, HOMI BHABHA ROAD , COLABA, MUMBAΑΙ – 400 005 , MAHARASHTRA, INDIA , AN AUTONOMOUS INSTITUTION UNDER THE PURVIEW OF DEPARTMENT OF ATOMIC ENERGY , GOVERNMENT OF INDIA.
1. UPENDER SINGH BHALLA.
INVENTOR
INTERNATIONAL APPLICATION NO
: 125 BOM 1999 DATED 24.02 . 1999
INDIAN APPLICATION NO .
:
PRIORITY NO .
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4 , PATENTS RULES 2003 ) PATENT OFFICE BRANCH, MUMBAI - 13 .
7 CLAIMS
A device for transduction of spatially and temporally patterned signals onto and/or from oral surface which comprises a transduction unit comprising a plurality of transducing elements located on a biocompatible electrically non- conducting material basal support provided with anchoring means to removably fix the basal support to the oral surface and a signal amplifying and conditioning unit connected to the transducing elements .
V
Drawings - 1- sheet
Comp.specn.: 10 pages 495 THE GAZETTE OF INDIA, FEBRUARY 21 , 2004 (PHALGUNA 2, 1925)
PART III-SEC . 2)
192083
128 A
:
IND . CL .
C11D 11/00
:
INT . CL .
:
TITLE
A COSMETIC PRODUCT FOR REMOVAL OF KERATOTIC PLUGS FROM SKIN PORES .
HINDUSTAN LEVER LIMITED ,
APPLICANT
HINDUSTAN LEVER HOUSE , 165/166 BACKBAY RECLAMATION , MUMBAI - 400 020
MAHARASHTRA , INDIA . AN INDIAN COMPANY
1. BRAIN ANDREW CROTTY
INVENTOR
2. PHILIP EDWARD MINER
3. ANTHONYH WILLIAM JOHNSON.
:
INTERNATIONAL APPLICATION NO
159 BOM 1999 DATED 05.03.1999
:
INDIAN
APPLICATION NO .
: 60/077614 DATED 10.03.1998 OF U.S.A.
PRIORITY NO.
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4 , PATENTS RULES 2003 ) , PATENT OFFICE BRANCH , MUMBAI - 13 .
05 CLAIMS
A cosmetic product for removing keratotic plugs from skin pores comprising:
a flexile substrate sheet ;
(i)
( ii) a composition impregnated on the sheet containing a polymer selected from the group consisting of anionic , cationic , nonionic, amphoteric, zwitterionic and polymer mixtures thereof, the composition increasing in tackiness upon being just prior to use thereby enhancing the composition adhesivity to the skin ; and (
iii) a pouch sealably enclosing the strip , a fragrance also being enclosed but separated from the strip present in an amount from 0.00001 to 2% by weight of the strip".
Drawings - 01 - sheet Comp.specn.: 21 pages 496
[PART III-SEC. 2.
THE GAZETTE OF INDIA, FEBRUARY 21 , 2004 (PHALGUNA 2, 1925 )
IND . CL .
: 32B
192084 INT . CL .
: C 07 D -471 / 04
TITL
: A PROCESS FOR PREPARATION OF IMIDE - DIUREA AND IMIDE- URETHANE UREA GREASE THICKENERS .
APPLICANT
: INDIAN OIL CORPORATION LIMITED , ( A GOVT.OF INDIA UNDERTAKING) OF G- 9 , ALI YAVAR JUNG MARG , BANDRA ( EAST) , MUMBAI - 400 051 , MAHARASHTRA, INDIA
INVENTORS
: (1 ) ANBANANDAM PARTHIBAN
(2)
KANTA PRASAD NAITHANI
(3 )
AKHILESH KUMAR BHATNAGAR
:
DATED
INTERNATIONAL APPLICATION NO
: 179 BOM 1999 DATED 15.03.1999
INDIAN APPLICATION NO .
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES 2003 ) , PATENT OFFICE BRANCH , MUMBAI - 13 .
05 CLAIMS
A process for the preparation of imide- diurea and imide- urethane urea grease thickeners comprising mixing 0.9 to 1 mole of dibasic acid with 20 times its weight of paraffinic hydrocarbon oil having viscosity of 90 to 118 cst at 40° C, adding Imole of primary diamine or aminohydroxy compound having 2 to 10 carbon atoms , heating the mixture in a phased manner upto 130° C for 1 hour, then upto 160° C for 2 hours and then 200 to 220 ° C for 30 minutes , adding further 50% of the initial quantity of hydrocarbon oil and allowing the contents to cool to 100 to 150° C. adding 1 mole of toluene diisocyanate followed by addition of I mole of primary monoamine of 8 to 22 carbon atonis . stirring the mixture and heating upto 200 ° C for 1 to 4 hours obtaining the product of the present invention wherein the said dibasic acid is selected from the group consisting of succinic acid, maleic acid. glutaric acid. phthalic acid or anhydride thereof and wherein further toluence diisocyanate is selected from the group consisting of isomer 2.4 -toluene diisocyanate . isomer 2.6-toluene diisocyanate or a mixture of the two isomers.
Comp.specn .: 15 pages
Drawings: NIL 497 THE GAZETTE OF INDIA, FEBRUARY 21 , 2004 (PHALGUNA 2, 1925)
PART III-SBC . 2].
192085 134B
:
IND. CL.
: B 60 K 001/00
INT. CL.
:
TITLE
AN ECO- FRIENDLY, ECONOMIC LIGHT WEIGHT HYBRID VEHICLE .
MALSHE VINOD CHINTAMANI
:
1 , STAFF QUARTERS, UDCT CAMPUS
APPLICANT & INVENTORS
MATUNGA, MUMBAI - 400 019. MAHARASHTRA , INDIA.
INDIAN NATIONAL
IDEM
:
INTERNATIONAL APPLICATION NO
DATED 21/03/1999
202/BOM/1999.
INDIAN APPLICATION NO .:
Complete Specification filed after provisional specification on 21.03.2000
:
PRIORITY NO.
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4, PATENTS RULES 2003) , PATENT OFFICE BRANCH, MUMBAI - 13.
03 CLAIMS
Aneco - friendly, economic light weight hybrid vehicle comprising an undercarriage with wheel, steering, accelerator and body, a small I.C. engine mounted on the said undercarriage connected to a D.C. generator which in turn connected to a battery for charging, the saidbattery connected to a D.C series motor for driving the vehicle, a solar coll being used as an auxiliary unit for charging the said battery; a power transmission system connected to the said D.C. motor for power transmission to front and / or rear wheels and regenerative breaking system provided with the said wheels.
Drawings 02 sheets
Complete specification: 08 pages
Drawings Nil sheets .
04 pages
Provisional specification:
2-467G1/2003 498
THE GAZETTE OF INDIA, FEBRUARY 21 , 2004 (PHALGUNA 2, 1925 ) [PART III-SEC. 2 IND . CL .
: 39 E
192086 INT. CL .
: H01 L - 21 /20
TITLE
: A PROCESS FOR DEPOSITION OF Bi2Se3 AND Sb2 Se3 THIΙΝ FILMS FROM AQUEOUS SOLUTIONS .
APPLICANT & INVENTORS
: DR.CHANDRAKANT DNYANDEV LOKHANDE, & RAJARAM SAKHARAM MANE , DEPARTMENT OF PHYSICS, SHIVAJI UNIVERSITY, KOLHAPUR -416 004 , MAHARASHTRA, INDIA. BOTH ARE INDIAN NATIONALS.
DATED--
INTERNATIONAL APPLICATION NO :
: 266 BOM 1999 DATED 09.04.1999.
INDIAN APPLICATION NO .
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4, PATENTS RULES 2003 ) , PATENT OFFICE BRANCH , MUMBAI - 13 .
09 CLAIMS
Aprocess for the deposition of large area, nanocrystalline and photoactive Bi2Se3 and Sb2 Se3 thin films having electrical resistivity between 103-10 ohm-cm, onto glass, Si and stainless steel substrates from aqueous baths using 15-50 g/ L of Bi2 (NO3 ) 3 and 25- 60 g/ L of SbCl3 at pH between 1.5-2.5, as cationic solution , respectively and 6-28 g/ L of Na2SeS0 ; at pH between 9 to 9.5 as an anionic solution with preparative parameters as . 27-70 ° C vessels temperature, 15-40 sec . Immersion time. 10-25 sec . Rinsing time and 30-60 number of immersion cycles .
Comp. specn . 11 pages
Drawings : NIL 499 THE GAZETTE OF INDIA, FEBRUARY 21 , 2004 (PHALGUNA 2, 1925)
PART III-SBC.2]
192087
: 170 D
IND . CL.
INT. CL.
: C 11 D 13/18, C11 D 17/00
TITLE
: IMPROVED DETERGENT COMPOSITION .
APPLICANT
: HINDUSTAN LEVER LIMITED ,
HINDUSTAN LEVER HOUSE , 165/166 BACKBAY RECLAMATION, MUMBAI – 400 020
MAHARASHTRA, INDIA . AN INDIAN COMPANY
1. NIKHILESHWAR MUKHERJEE .
INVENTOR
2. EARLA SAIKUMAR
INTERNATIONAL :
APPLICATION NO
INDIAN
: 356 BOM 1999 DATED 11.05 1999
APPLICATION NO .
COMPLETE SPECIFICATION FILED AFTER PROVISIONAL LEFT ON 9.5.2000
PRIORITY NO .
:
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4, PATENTS RULES 2003 ) , PATENT OFFICE BRANCH, MUMBAI - 13 .
7.
1.1 CLAIMS
Asolid cleaning composition comprising:
(i) 5to40%. Of a detergent active
(ii) 10 to 85% of abrasive materials, comprising aluminium oxide and optionally one or more other abrasive materials;
(iii) at least 0.5% of a particulate material with a minimum water absorptive capacity of200% of its own weight,
Drawings - Nil - sheet
Prov. Spen. 15 pages
Drawings - Nil - sheet
Comp.specn .: 21 pages 500
THE GAZETTE OF INDIA, FEBRUARY 21 , 2004 (PHALGUNA 2, 1925) [PART III-SBC. 2 IND . CL .
: 40 F
192068 INT . CL .
: F 26 B 5/14.
TITLE
: METHOD FOR MAKING DRYING MORE EFFECTIVE APPLICANT
: OUTOKUMPU OYJ,
RIHIHITONTUNTIE 7,
FIN - 02200, ESPOO, FINLAND
A FINNISH PUBLIC LIMITED COMPANY
INVENTOR
1. EKBARG BJARNE .
2. NORRAGARD GORAN .
3. JUAREZ JUAN A. GALLEGO
4. CORRAL RODRIGUEZ
5. SEGURA LUIS ELVIRA
INTERNATIONAL APPLICATION NO :
INDIAN
: 422 BOM 1999 DATED 04,06. 1999
APPLICATION NO .
PRIORITY NO .
: -981292 DATED 05.06.1998 OF FINLAND.
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4, PATENTS RULES 2003) , PATENT OFFICE BRANCH , MUMBAI - 13.
9 CLAIMS
A method for making the drying of finely divided materials , more effective in a suction drier provided with a fine porous suction surface, where the radii of the fine pores ofthe suction surface are essentially within the range of 0.5-2 micrometers and in which method of a slurry containing liquid and solids there is made a filter cake (2,12,22) onto the fine porous liquid suction surface constituting the filter surface of a filter medium ( 1,11,21 ) , characterized in that the filter cake (2,12,22) and an oscillator (6,15, 25) are placed in relation to each other, so that in between the filter cake (2,12,22 ) and the oscillator ( 6,15,25 ) , there is generated an acoustic field by virtue of a mechanical contact between the filter cake (2,12,22) and the oscillator ( 6,15, 25) or a structural element (7 , 16,26) connected to the oscillator .
Comp.specn .: 9 pages
Drawings - 3 - sheets 501 THE GAZETTE OF INDIA, PEBRUARY 21 , 2004 (PHALGUNA 2, 1925)
PART III-Sac. 2]
192009 206 E
:
IND. CL.
: F02P 5/04.
INT. CL.
:
TITLE
AN ELECTRONIC TIMING SYSTEM FOR I.S MACHINE (INDIVIDUAL SECTION MACHINE ).
: SHAMVIK GLASSTECH PVT. LTD .
APPLICANT
155, MAKER CHAMBERS VI , 14TH FLOOR, 220, NARIMAN POINT, MUMBAI - 400 021 , MAHARASHTRA, INDIA.
AN INDIAN COMPANY.
1) VIJAY KUMAR GOEL.
INVENTOR
:
597 BOM 1999 DATED 25. 08. 1999
INTERNATIONAL APPLICATION NO INDIAN APPLICATION NO .
:
PRIORITY NO.
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4, PATENTS RULES 2003) , PATENT OFFICE BRANCH, MUMBAI - 13.
2 CLAIMS
Anelectronictiming system I.S. Machine ( Individual Section Machine) consisting of Central Processing Unit ( 1 ) built- in- Monitor (2) a data input system (3 ) & storing devicewhich wil programme the timing of the particulars solenoid valve through control panel (4) and electronic valve block (5) having 21 solenoid ceil each operates the individual valve block; a logie controller (6) to receives the signal from the Central Processing Unit ( 1 ) and to send the position to sensors and generates signal to output(8) card to operate the individual electronic valve block and external solenoid coil (9) which are controlling individual unit of the machine by means of digital switching solenoid coils of the electronic valve block; also provided with blank & blow switches which sends signal to electronic valve block to generate signal to the input card and control the operation of output card.
Drawings -2- sheets
Comp.specs.: 5 pages 502
THE GAZETTE OF INDIA, FEBRUARY 21 , 2004
(PHALGUNA 2, 1925) [PART III-SEC . 2 IND . CL .
: 17 A 2
192090
INT . CL .
: A 23 B 7/10
TITLE
: A PROCESS FOR MANUFACTURING BLACK TEA .
APPLICANT
: HINDUSTAN LEVER LIMITED , HINDUSTAN LEVER HOUSE, 165/166, BACK BAY RECLAMATION. MUMBAI , -400 020 (MAHARASHTRA) INDIA. An IndianCo..
INVENTORS
: 1. NAGALAKSHMI SURENDRA,
2. CHANDRAMOULI MUNIKOTE RANGANTHASSASTRY 3. SINKAR VILAS PANDURANG,
4. MAHANTA PRADIP KUMAR,
INTERNATIONAL :
APPLICATION NO INDIAN
APPLICATION NO .
43 / MUM /2001
DATED 16.01.2001
Complete specification filed after provisional specification on 15-1-2002
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4, PATENTS RULES 2003 ) , PATENT OFFICE BRANCH, MUMBAI - 13 .
7 CLAIMS
A Process for manufacturing black tea comprising the steps of macerating freshly plucked tea leaves , allowing them to ferment . firing the leaves and then ing them to yield black tea, characterized in that the tea leaves are treated with 0.00 : - , of one or more water - soluble or water dispersible salts of calcium , magnesium and anganese at some stage before or during fermentation step in order to generate black that infuses to give a beverage with improved Colour, brightness and aroma .
Provisional Specification 16 Pages
Drawing - NIL
Complete Specification - 18 Pages
Drawing - NIL 50340 THE GAZETTE OF INDIA, FEBRUARY 21 , 2004 ( PHALGUNA 2, 1925 )
PART III-SEC . 2]
192091 206 E
:
Ind.Cl
Int.Cl
H05B 6/68 , H01H 19/14
:
Title
AN APPARATUS FOR CONTROLLING OUTPUT OF A MICROWAVE GENERATOR OF A MICROWAVE OVEN.
Applicant :
DAEWOO ELECTRONICS CORPORATION, OF 686, AHYEON -DONG, MAPO- GU, SEOUL KOREA .
KIM, SANG - JIN.
Inventor :
I. 2. KANG , HEUNG -DAE .
1341 /CAL/ 1996 FILED ON 25.07.1996
Application no.
(CONVENTION NOS. 95-18653 AND 95-18655 FILED ON 26.7.95 IN SOUTH KOREA)
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)
PATENT OFFICE KOLKATA.
11 CLAIMS.
102
110
Anapparatus for controlling output of a microwave generator ofa
124122
microwave oven, the apparatus comprising:
124 (a) a control panel having an installing hole formed thereon;
104-
(b) a control knob having a knob shaft which is inserted through the installing hole on the control panel;
(c) a planar coupler fixedly secured to the knob shaft of the control knob through the installing hole, the planar coupler being rotatably installed on the control panel together with the control knob for controlling the output of a microwave generator of the microwave oven ; the said planar coupler is engagedto a microwave generator in a known manner ;
(d) an annular projection integrally formed on one side surface of the coupler facing the control panel and having a plurality of V- grooves formed at circumferentially interspaced distances in a peripheral surface ofthe annular projection;
(e) a resilient member for restricting a free rotation of the planar coupler having a protrusion at a longitudinally intermediate position thereof; and the protrusion engaging any one of the plurality 9f V-groovesunderthe elasticity of the resilient means during the rotation ofthe coupler; and
(f) a fixing member for mounting the resilient member on the control panel , whereby the protrusion of the resilient member remains in resilient contact on the peripheral surface of the annular projection of the planar coupler .
Drawings: 3 sheets
pages.
Complete Specifications : 15 504
THE GAZETTE OF INDIA, FEBRUARY 21 , 2004 (PHALGUNA 2, 1925) [PART III-SBC, 2 Ind.Cl :
192092 Int.C.
:
C08L 67/07
Title
:
AN AMBIENT TEMPERATURE -CURABLE ADHESIVE COMPOSITION :
Applicant
LORD CORPORATION, OF CROSSROADS CORPORATE PARK, BLDG . II , 110 CORNING ROAD, SUITE 100 CARY, NORTH CAROLINA 27511 , UNITED STATES OF AMERICA .
Inventor :
I. ROBIN F. RIGHETTINI .
2. TERRENCE H. DAWDY.
586/ CAL/ 1997 FILED ON 02.04.1997
Application no.
(CONVENTION NO . 08/638 , 930 FILED ON 15.04.1996 IN UNITED STATES OF AMERICA.) APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)
PATENT OFFICE KOLKATA.
5 CLAIMS.
Anambient temperature- curable adhesive composition comprising.
(a) about 10 to about 90 weight percent of at least
one free radical polymerizable monomer ;
(b) about: 10 to about 80 weight percent of at least one polymeric material ;
(c) about 0 to about 20 weight percent of phosphorus- containing compound having one or more olefinic groups and no less than one P -OH group ; .
(d) about 0.05 to about weight percent of reducing agent according to Formula (1 ) :
R2
R1
R4
X
R3 505 PART III-SEC. 2]
THE GAZETTE OF INDIA, FEBRUARY 21 , 2004 (PHALGUNA 2 , 1925 )
erein each of R1 and R2 is independently selected
from the group consisting of linear or branched, saturated or . Unsaturated, Cl --C4 alkyl alkyl and limear or branched, saturated or unsaturated, C1 -C4 hydroxyalkyl .;
each of R3 and R4 hyarogen ; and X is chlorine or bromine ; and
(e) at least one oxidizing agent which is co-reactive with said reducing agent in an amount effective to generate free radicals and to initiate and propagate polymerization of said at least one free radical polymerizable monomer .
NIL
pages .
Drawings :
CompleteSpecifications : 23
3467 GI/2003 506
[PART III-SEC. 2 THE GAZETTE OF INDIA , FEBRUARY 21 , 2004 (PHALGUNA 2, 1925)
Ind.Cl :
40F
192093 Int . Cl: 7
:
C08L 95/00
Title
:
AN IMPROVED MUDGUN CLAY FOR PLUGGING THE TAP-HOLE OFBLAST FURNACES ANDA PROCESS OF PREPARING THE SAME Applicant :
STEEL AUTHORITY OF INDIA LIMITED OF ISPAT BHAWAN, LODHI ROAD, NEW DELHI - 110003 , INDIA
Inventor
PANKAJ KUMAR ROY CHOWDHURY 1.
DEBESH HALDER . 2.
AJOY BHATTACHARYA. 3 .
PURIMETLA CHINTAISH . 4.
5. RAJIB KUMAR AHUJA .
6. DEBI PRASAD CHAKRABORTI .
627/CAL/ 1997 FILED ON 10-4-1997
Application no.
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)
PATENT OFFICE KOLKATA.
6 CLAIMS .
An improved mudgun clay for plugging the tap-hole of blast furnaces , having the composition ( by weight %) : plastics fire clay - 10 to 30, coke breeze - 10 to 30, fire clay grog - 5 to 15 , pitch powder - 5 to 15 , silicon carbide - 5 to 10, liquid resin , such as herein described, - 5 to 20 and oil , such as herein described, - 5 to 10 , said ingredients acting synergistically to produce the improved clay.
Complete Specifications : 10 pages.
Drawings: 1 sheets 507 THE GAZETTE OF INDIA, FEBRUARY 21 , 2004 (PHALGUNA 2, 1925)
PART III-SEC . 2]
192094
51 D
Ind.Cl
B26B 21/52
:
Int.C.
A RAZOR HANDLE ASSEMBLY
:
Title
Applicant :
NAVIN PRAKASH MALHOTRA, NRI OF 226/2 , LOWER CIRCULAR ROAD, CALCUTTA 700 020, WEST BENGAL, INDIA
NAVIN PRAKASH MALHOTRA
Inventor :
767/CAL/ 1997 FILED ON 30.04.1997
Application no.
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003) PATENT OFFICE KOLKATA.
5CLAIMS.
Arazor handle assembly (51 ) comprising a grip portion (50), a head portion (53) at one end of the grip portion (50) , arms (59,60), clamps (68,69), swivel heads (61,62 ), pusher (54),, leaf spring (71 ) and coil spring (70) being assembled in the head portion (53 ), characterised in that the said components are housed in a cassette (63) which is secured and enclosed in the said head portion (53 ) and wherein two arms , (59,60) errulnating from said cassette (63) are movable towards and away from each other such that two clamps (68,69) are integrally moulded on two arms (59,60) and said clamps being adapted to accept a razor blade 'assembly and to pennit pivotal movement of the same on the handle assembly (51 ) , the handle assembly (51 ) having a spring loaded' pusher (54) which is disposed in the said razor handle head portion (53 ) and extends between the two clamps (68,69) , the pusher (54) being adapted to engage an underside cam portion (34)of the blade assembly and thereby impel said blade assembly to a given position on the swivel heads (61,62) of said, clamps (68,69) , 508
[PART III-SBC . 2 THE GAZETTE OF INDIA, FEBRUARY 21 , 2004 (PHALGUNA 2, 1925 )
said pusher (54) having laterally protruding extensions (74,75) having raised portion (76,77) at the free end of each extension ( 74,75 ), each of said clamps (68,69) having an opening (81,82) which is meant for accepting the said raised portions (76,77) when the spring ( 70) is provided to press said raised portion ( 76,77) into said openings , when the said clamps (68,69) are moved towards each other and engagement of said blade pusher (54) with said blade assembly
61
61
34
ヤマ
7
65
64
60
80
78
72
effects releasing the said raised portions (76, 77) from said openings to allow said arms to move away from each other and said clamps swivel heads to hold the blade assembly.
Drawings: 10 sheets
pages .
Complete Specifications : 11 509 PART III-SEC .2]
THE GAZETTE OF INDIA, FEBRUARY 21 , 2004 (PHALGUNA 2, 1925)
192095 :
Ind.Cl
Int.Cl :
B01B 53/56, 53/75, 53/86, 53/94
Title :
AMETHOD FOR REMOVING A SORBABLE COMPONENT FROM A LEAN GASEOUS STREAM AND AN APPARATUS FOR THE SAME Applicant :
ENGELHARD CORPORATION , OF 101 WOOD AVENUE, ISELIN NEW JERSEY 08830, UNITED STATES OF AMERICA .
1. JENNIFER SCHAEFER FEELEY .
Inventor
2. ROBERT JOSEPH FARRAUTO.
3. MICHEL DEEBA .
4. JORDAN KEITH LAMPERT .
847/CAL/ 1997 FILED ON 12.05.1997
Application no. (CONVENTION-NO. 08/645,301 FILED ON 13.5.1996 IN UNITED STATES OF AMERICA. )
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003) PATENT OFFICE KOLKATA.
35 CLAIMS.
A method for producing component comprising : a lean gaseous Stream derived of sorbable
a ( a) passing the gasseous stream in A trapping period within A sorbing temperature range through catalyzed trap member comprising a combination of a regenerable sorbent material and an oxidation catalyst , and sorbing some of the sorbable component into the sorbent material to thereby provide a sorbable component - depleted gaseous stream exiting the catalyzed trap member;
b) introducing a combustible component in A desorbing period into the gaseous stream upstream of the catalyzed trap member And combusting the combustible component in the presence of the oxi-
dation catalyst , the combustible component being introduced in An amount which is limited in order to maintain the bulk composition of the gaseous stream lean but which is enough to heat a portion of the sorbent material to within a desorbing temperature range to thereby thermally desorb the sorbable component from the sorbent material and provide a sorbable component - enriched gaseous stream exiting the catalyzed trap member .
CompleteSpecifications : 35 pages.
Drawings: 7 sheets 510
[PART III-SEC. 2 THE GAZETTE OF INDIA, FEBRUARY 21 , 2004 (PHALGUNA 2, 1925)
Ind.C :
192096 Int.Cl
: C22C 21/02 , 21/08 , C 22 F 1/05
Title
:
METHOD OF MANUFACTURING EXTRUDED/FORGED PRODUCTS FROM CXXX SERIES ALUMINIUM ALLOY, AND THE PRODUCTS SO MANUFACTURED .
Applicant : COMAALCO ALUMINIUM LIMITED, OF 39TH FLOOR, 55 COLLINS STREET, MELBOURNE , VICTORIA 3000 , AUSTRALIA Inventor :
MALCOM JAMES COUPER .
1273/ CAL / 1997 FILED ON 03.07.1997
Application no .
(CONVENTION NO. PO-0847 FILED ON 04.07.1996 IN AUSTRALIA .)
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)
PATENT OFFICE KOLKATA.
7 CLAIMS .
A. method of manufacturing an extruded product from a 6XXX series aluminium alloy which comprses the steps of:
a) Casting a billet of 6XXX series aluminium alloy containing Mg Si precipitates wherein the Mg and Si that is available to form MgSi precipitates is present in amounts such that the ratio of the number of atoms of Mg to the number of atoms of Si is between 0.8 : 1 and 1.2 : 1
b) Extruding a final product shape from the billet; and
c) Heat treating the extruded product shape and precipitating MgSi
Drawings: 1 sheets
Complete Specifications : 23 pages.
511 PART III-SEC . 2 ]
THE GAZETTE OF INDIA, FEBRUARY 21 , 2004 (PHALGUNA 2, 1925 )
192097
:
206 E
Ind.Cl
:
Int.CJ'
H04N - 9 / 79-11 /04
Title
:
AN APPARATUS FOR BINARY SHAPE ENCODING
Applicant :
DAEWOO ELECTRONICS CORPORATION , OF 686 , AHYEON -DONG MAPO -GU , SEOUL , KOREA.
Inventor :
1 . SEOK - WON HAN
2. JIN -HUN KIM
1607/CAL/1997 FILED ON 01.09.1997
Application no.
(CONVENTIOΝ ΝΟ. 97-32204 FILED ON 11.7.1997 IN KORE .)
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)
PATENT OFFICE KOLKATA.
10 CLAIMS .
\
An apparatus. for binary shape encoding encodes a binary alpha block (BAB) consisting ofMxN binary pixels included in a video signal , M and N each being a positive even integer, comprising: horizontal sub-sampling circuit (205) for sampling every other horizontal lines of the BAB to generate a first block starting from either a first or second horizontal line of the BAB , wherein the first horizontal line is the topmost horizontal line of the BAB ;
vertical sub -sampling circuit (210) for sampling every other vertical lines of the first block to generate a first sample block as a base layer starting from either a first or second vertical line ofthe first block, wherein the first vertical line is the leftmost vertical line in the first block;
base layer encoding circuit (215 ) for encoding the first sample block to thereby produce coded base layer data; and enhancement layer encoding circuit (220 , 225, 230, 235 , 24(), 245) for enhancement layer encoding based on the BAB, the first block and the first sample block to thereby provide coded horizontal and vertical enhancement layer data
ヨー
Drawings: 10 sheets
Complete Specifications : 47 pages.
512
[PART III-SEC. 2 THE GAZETTE OF INDIA, FEBRUARY 21 , 2004 (PHALGUNA 2 , 1925 )
192098 Ind.Cl
:
160(C)
:
Int.Cl
A47C 1/023
Title
:
A SLIDEWAY FOR A VEHICLE SEAT AND A SEAT FITTED WITH SUCH A SLIDEWAY
Applicant : BERTRAND FAURĖ EQUIPMENTS SA , OF 276 , RUE LOUIS BLERIOT, 92100, BOULOGNE , FRANCE .
BALOCHE FRANCOIS .
I.
Inventor :
2. ROHEE RENE .
2091 /CAL/ 1997 FILED ON 05.11.1997
Application no.
(CONVENTION NO. FR - 96 13881 FILED ON 14.11.1996 IN FRANCE)
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)
PATENT OFFICE KOLKATA .
9CLAIMS.
13 2
28
26
26
27
25
9
-27
28
30
25
19
19
29
31
23
23
31
33-
18
24
10
32 222
20
A slideway for a vehicle seat, the slideway comprising a' female ' section member ( 11 ), a ' male ' section member ( 12 ) engaged in the female section member in such a manner as to leave four longitudinal ball races ( 30,32) between the two section members and group of balls (31 , 33 ) received in said races to enable relative longitudinal sliding between the two section members , the right section of the male section member ( 12) being generally in the form of a narrow channel comprising, firstly, a substantially horizontal web ( 13 ) and secondly two flanges ( 14) each extending substantially vertically from the web to an end edge (IS ), said end edge being extended outwardly by flaps ( 16) each having a vertical end portion ( 19) , the right section of the female
র 513 THE GAZETTE OF INDIA, FEBRUARY 21, 2004 (PHALGUNA 2, 1925 )
PART III-SEC. 2]
section member ( 11 ) being generally in the form of a wide channel and comprising, firstly a substantially horizontal web (20) adjacent the end edges ( 15) of the flanges of the male section member and secondly to flanges (23 ) each extending substantially vertically in the opposite direction to the two flanges ( 14) of the male section member from the web (20) of the female section member to respective end edges (25 ), thereby enveloping the male section member ( 12), the end edge (25 ) of each of the flanges of the female section member being extended inwards by a reentrant trough (26) comprising a horizontal length (27) extending from the end edge of the corresponding flange of the female sec~ member , said horizontal length itself being extended by a reentrant wall (28,29 ) disposed between the corresponding flange ( 14 ) and flap of the male section member, said reentrant wall comprising a sloping length (28) which extends at an angle towards the corresponding flange ( 14) of the male section member and towards the end edge (15 ) of said flange, said
sloping length co-operating with the corresponding flap ( 16) of the male section member to define a first ball race (30) such that the balls (31 ) of this ball race are in contact with said sloping length and with said flap, whereas said flap (16) also co-operates with a corner zone (24) situated at the junctionbetween the web (20) of the female section member and the corresponding flange (33) of said female section member to define a second ball race (32) in such a manner that the balls (33) in the second ball race are in contact with said flap and with said corner zone ,
Characterized in that the balls (31 ) of each first ball race press against the vertical end portion (19) of the corresponding flap of the male section member; and
In that the sloping length (28) of each reentrant trough of the female section member directly extends the horizontal length (27) of said reentrant trough , the sloping length having a right section that is rectilinear in shape.
Drawings: 1 sheets
Complete Specifications : 15 pages.
4-467 GI/2003 514
[PART III-SEC. 2 THE GAZETTE OF INDIA , FEBRUARY 21 , 2004 (PHALGUNA 2, 1925)
:
192099 24A
Ind.Cl
Int.Cl
B60T 7/08
Title
:
SAFETY BRAKE , SYSTEM FOR AUTOMOBILES VEHICLES .
Applicant :
FICO CABLES S.A. OF 98 , GRAN VIA CARLOS III 08028 , BARCELONA SPAIN .
:
Inventor
CARLOS GABAS
Application no. 897/ CAL/ 1998 FILED ON 18.5.1998 (CONVENTION NO. P9701131 FILED ON 26/05/1997 IN SPAIN)
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)
PATENT OFFICE KOLKATA.
5 CLAIMS .
Safety brake system for automobile vehicles , comprising:
a support ( 1 ) provided with means ( 7) for fixing it to the structure (8) of the vehicle;
a brake lever (2 ) attached to the support ( 1 ) by means of a pivot pin (9) , with the lever (2) pivotable in both directions between two positions namely , rest and braking;
a self- regulating device ( 3) and a self- adjustment device (4) for the length of the portion of sheathed steel cable ( 28) of the control cable which links the safety brake system with the actuating mechanism of the braking means of the vehicle wheels linked with the safety brake system; and a device (5) for fixing the position taken up by the brake lever (2) , characterized in that:
the self- regulating device ( 3) has a traction body ( 11 ) , a spiral traction spring (12) and a helical locking spring ( 13 ) , all coaxially arranged with respect to the pivot pin of the brake lever (2) ... : and wherein -
-the traction body ( 11 ) is of generally cylindrical shape arıd pivotable in both directions , having one traction end ( 17) facing the support ( 1 ) and one locking end ( 18) , the tractiori end ( 17) having a cavity ( 55) adapted to receive the spiral traction spring ( 12) , while the locking end ( 18) runs coaxially to the helical locking spring ( 13 ) , the traction body ( 11 ) having means for fixing and guiding the corresponding end ( 27) of the steel PART III- SEC . 2]
515 THE GAZETTE OF INDIA, FEBRUARY 21 , 2004 (PHALGUNA 2 , 1925 )
cable ( 28 ) of the control cable ; the spiral traction spring ( 12 ) works permanently under torsion and has one of its ends ( 19 ) fixed to the support ( 1 ) while its other end ( 20 ) is fixed to the traction body ( 11 ) , in such a way that it permanently imparts to the traction body ( 11 ) a pivoting force which subjects the steel cable ( 28 ) to traction ; and
-the helical locking spring ( 13 ) works permanently under torsion so that by elastic reaction it exercises a pressing action on the locking end ( 18 ) of the traction body ( 11 ) , with one of its ends ( 21 ) fixed to the brake lever ( 2 ) while its other end ( 23 ) is attached to an opening stop ( 54 ) mounted on the support ( 1 ) , all of this so designed that : when the brake lever ( 2 ) is in the rest position , the opening stop ( 54 ) pushes the corresponding end ( 23 ) of the helical locking spring .. ( 13 ) which is subjected to a torsion torque in a direction opposite to that of its elastic reaction pressing upon the locking end ( 18 ) of the traction body (11) , so that the latter can pivot by actuation of the traction spring ( 12 ) exercising on the end ( 27 ) of the steel cable ( 28 ) a traction force which permanently and automatically adjusts the length of the portion of sheathed steel cable of the control cable , and ) -when the brake lever ( 2 ) is in a position other than the rest position , the opening stop ( 54 ) ceases to exercise pressure on the end ( 23 ) of the helical locking spring ( 13 ) , so that the latter by " elastic reaction exercises said pressing action on the locking end ( 18) of the traction body ( 11 ) which is attached to the brake lever (2) in its movements from the rest position to the braking position and vice versa.
10-14
454330-39
FIG,2
FIG.I
CompleteSpecifications : 21 pages.
Drawings: 5 sheets
:
[PART III-SEC. 2 THE GAZETTE OF INDIA , FEBRUARY 21 , 2004 (PHALGUNA 2, 1925)
516
192100 :
32(C)
Ind.Cl
Α6ΙΚ 31/352 C07D 311/02
Int.CI :
:
Title
IMPROVED PROCESS FOR THE PREPARATION OF DRUG FROM THE SEEDS OF CAESALPINIA SPECIES FOR THE TREATMENT OF TYPE 2 DIABETES MELLITUS .
Applicant
PROFESSOR BISWAPATI MIKHERJEE AND DR.TUHIN KANTI BISWAS OF, 244B , AJC BOSE ROAD , CALCUTTA 700 020, W.B. INDIA
Inventor :
PROFESSOR BISWAPATI MIKHERJEE DR.TUHIN KANTI BISWAS
59/CAL/ 2002 FILED ON 30.01.2002
Application no.
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)
PATENT OFFICE KOLKATA.
3 CLAIMS .
An improved process for the preparation of drugs from the seeds of Caesalpinia species for the treatment of type 2 diabetes mellitus comprising of the following steps :
i. Grinding to moderately coarse powder (all the particles pas through No. 710 sieve and more than 40% through No. 250 sieve, i.e, 710/250 ) of sun dried seed shell of Caesalpinia bonducella F. by gravimetric technique .
ii. Cold Percolation of the plant material obtained from step ( i) with solvents for not less than 20 hours.
iii . Centrifuging the materials obtained from step ( ii ) as herein described.
iv . Drying the extracts by conventional process and finally lyophilized at predetermined temperature as herein described to obtain the dried powder for the treatment of said disease .
NIL
Drawings:
Complete Specifications : 10 pages.
517 THE GAZETTE OF INDIA, FEBRUARY 21 , 2004 (PHALGUNA 2, 1925)
PART III-SEC . 2 ].
192101
158A
Ind . Cl .:
B 61 F5/ 50
Int CI :
" A STEERING ARM ASSEMBLY FOR LATERAL CONTROL OF A RAILWAY CAR TRUCK "
AMSTED INDUSTRIES INCORPORATED
APPLICANT( S ) :
205 NORTH MICHIGAN AVENUE 44TH FLOOR-
BOULEVARD TOWERS SOUTH CHICAGO ,
ILLINOIS 60601 , USA a corporation of delaware.
USA.
1. RAMI V NASSAR.
INVENTOR(S) :
07/04/1995
filed on
430 MAS 95
APPLICATION NO :
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4 , PATENTS RULES 2003 ) PATENT OFFICE , CHENNAI BRANCH .
8 CLAIM
1- A steering arm assembly for lateral control of a railway car truck having a pivotal truck frame with a longitudinal axis , said truck frame having a first sidefrare creinent and a second sideframe element substantially parallel to the said first sideframe element, each said first and second sideframe element having a mid -region , a forward end and a rear end , a transverse frame element extending between said first and second sideframe element mid- regions , a pair of longitudinally spaced wheelsets , each said wheelset having an axle with spaced apart wheels fixed thereon , a wheelset mounted at each of said forward end and rear end of said sideframe elements , said steering arm assembly comprising: a first U- shaped steering arm sub -assembly and a second U - shaped steering arm sub - assembly said first and second steering arm sub- assemblies being disposed for transmitting steering forces from one of said wheelsets to the other of said wheelsets independent of the relative lateral position of the steering arm sub- assemblies and truck frame elements , each said first and second steering arm sub -assemblies having a respective cross beam with a first end and a second end, and each of said first and second steering arm sub - assemblies having a respective cross beam with a first end and a second end , and each of said first and second steering arm sub- assemblies having a respective first side 518
THE GAZETTE OF INDIA, FEBRUARY 21 , 2004 (PHALGUNA 2, 1925) [PART III-SEC. 2 arım and a second side arm, one of said first and second side arms being joined to a respective end of said cross- beam and the other of said first and second side arms being joined to the other end of said cross -beam, each of said first and second side arms comprising a respective body portion and a respective longitudinal segment, each said longitudinal segment extending generally from the respective cross beam for connection to the respective axle , said longitudinal segment of each first and second sub - assembly sidearm being generally parallel to said fongitudinal segment of the other first and second sub- assembly sidearm , each said longitudinal segment and said body portion having a respective inner surface and a respective outer surface, said inner surface of each said body portion being disposed generally normal to a corresponding said inner surface of each said longitudinal segment and forming a respective inner junction on each said sub - assembly sidearms , each said sidearm inner junction comprising a dual radius undercut having a first radius in proximity to said body portion and a second radius in proximity to said longitudinal segment , said dual radius undercut defining a generally ovate depression and ovate surface in said sidearm wherein said ovate surface forms a first contact area with said body portion inner surface and a second contact area with said longitudinal segment inner surface , said ovate surface at said first contact area generally tangentially joined to said inner surface of said body portion and said ovate surface at said second ovate surface at said second contact area joined with said inner surface of said longitudinal segment at said second radius , said second radius having a generally convex configuration with respect to said inner surface of said longitudinal segment , said dual radius undercut providing a relatively smooth cross sectional transition between said body portion and said longitudinally portion.
53
76
FIG.6
COMP . SPECN : 17
PAGES: DRAWING : 3
Reference cited : US 4781124
84 5224428
-82
80
65 519 PART III-SEC. 2]
THE GAZETTE OF INDIA, FEBRUARY 21 , 2004 (PHALGUNA 2, 1925 )
206 E
192102
Ind.Cl .:
G11 B 5/00
IntCI :
"A MAGNETIC STORAGE MEDIUM HAVING SERVO PATTERN , A METHOD AND AN APPARATUS FOR PRODUCING THE SAME"
APPLICANT( S):
INTERNATIONAL BUSINESS MACHINES CORPORATION A COMPANY ORGANIZED AND EXISTING UNDER THE LAWS OF THE STATE OF NEW YORK, USA, OF ARMONK, NEW YORK 10504, USA.
... 1.THOMAS ROBERT ALBRECHT
INVENTOR(S) :
2. ROBERT CARL BARRETT
3. JAMES HOWARD EATON
7-Jun-95
684/MAS/95
filedon
ApplicationNo.
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4, PATENTS RULES, 2003 ) PATENT OFFICE, CHENNAI BRANCH .
26CLAIMS
Amagnetic storage medium (20) having a servo pattern ( 94) reocrded into at least one servo track (27) for generating a servo read head signal from a servo head (26) as the head is moved relative to the servo pattern , the servo pattern comprising a cyclic sequence of magnetic flux transitions that extend continuously across the width of the at least one servo track and define servo pattern stripes such that the servo read head signal varies as the servo read head is moved across the width of a servo track, the stripes having at least a first azimuthal orientation and a second azimuthal orientation , such that the first azimuthal orientation is not parallel to the second azimuthal orientation , and characterised in that the stripes are arranged in groups having a plurality of sequential stripes at the first azimuthal orientation followed by a plurality of sequential stripes at the second azimuthal orientation .
DRAWINGS : 23 SHEETS.
COMP. SPECN.:- 48 PAGES
REFERENCE : US 3686649 .
[PART III-SEC . 2 520
THE GAZETTE OF INDIA , FEBRUARY 21 , 2004 (PHALGUNA 2, 1925 )
192103
195 D
Ind . Cl .:
B 27 G 11/00
IntCI :
"AN APPARATUS FOR INCREASING THE FLOW RATE OF A LIQUID THROUGH AN ORIFICE "
KIMBERLY-CLARK WORLDWIDE INCORPORATED
APPLICANT( S) :
A US COMPANY OF 401'N LAKE STREET NEENAH , WISCONSIN 54956 USA
1. LEE KIRBY JAMESON ;
INVENTOR ( S ) :
2. LAMAR . HEATH GIPSON
3. BERNARD COCHEN.
19-Jun-95
740 MAS 95. FILED ON
APPLICATION NO :
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES , 2003 ) PATENT OFFICE, CHENNAI BRANCH .
18 CLAIMS
An apparatus for increasing the flow rate of pressurized liquid through an orifice the apparatus comprising
(a) a die housing defining:
a chamber adapted to receive a pressurized liquid;. an inlet adapted to supply the chamber with the pressurized liquid, and at least one exit orifice defined by the walls of a die tip , the exit orifice being adapted to receive the pressurized liquid from the chamber and pass the liquid out of the die housing ; and (b ) a means for applying ultrasonic energy to a portion of the pressurized liquid within the chamber without applying ultrasonic energy to the die tip , where the means for applying ultrasonic energy is located within the chamber . 146 118
124
116
148
156 122
128
158
154
-108
126-
130
100
102
152
104
110
132 COMP.SPECN : 48 PAGES DRAWING : 5 SHEETS .
-106
136
REFERENCE CITED : US 3016599 ; 3755527 ; 3849241 ; 4663220; 4627811.38 150
112
134 120140
144
142
114 521
THE GAZETTE OF INDIA, FEBRUARY 21 , 2004 (PHALGUNA 2, 1925)
PART III-SEC . 2]
192104
206E
Ind. Cl .:
H 01 L 29/74; 31/00
Int . Cl .:
"GATE TURN- OFF THYRISTOR "
ABB SCHWEIZ HOLDING AG
APPLICANT(S) :
BROWN BOVERI STRASSE 6
5400 BADEN
SWITZERLAND
ACOMPANY INCORPORATED IN
SWITZERLAND
INVENTOR( S):
1. Dr. FRIEDHELM BAUER; 2. SIMON EICHER.
21-Jun-95
757 MAS 95 FILED ON
APPLICATION NO:
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4, PATENTS RULES , 2003 ) PATENT OFFICE, CHENNAI BRANCH .
8CLAIMS
Agate turn- off thyristor , comprising: (a) a first main surface (1 ) and a second main surface (2 ) , a number ofdifferently doped semiconductor layers ( 6-9) between said first and second main surface; (b) an anode electrode (3 ) on the second main surface (2) and a cathode electrode (4) and a gate electrode (5) on the first main surface ( 1 ); (c) the semiconductor layers (6-9) comprising, viewed from the second main surface (2) , a p¹- doped anode emitter (6), and n-doped n-base (7 ) and a p-doped p-base (8), the anode emitter (6) being in electrical contact with the anode electrode (3 ) and the p -base (8) being in electrical contact with the gate electrode (5 ), and n - doped cathode-emitter regions (9), which are in electrical contact with the cathode electrode (4) , being incorporated in the p -base (8); wherein the anode emitter (6) is designed as a transparent emitter, nt -doped anode short-circuit regions ( 10) penetrate through the anode emitter (6), and an n - doped barrier layer ( 11 ) is provided between the n -base (7) and the anode emitter (6) . 5 5 DRAWING: 2 SHEETS .
COMP.SPECN : 14 PAGES
REFERENCE CITED: EP-B1-0159797; EP-A1-0327901 .
3
2 5-467G/2003 522
THE GAZETTE OF INDIA, FEBRUARY 21 , 2004 (PHALGUNA 2, 1925) [PART III-SEC. 2 Ind.Cl.:
206 E
192105 IntCI :
H 04 J 13/00
"SYSTEM FOR SIMULATING USER INTERFERENCE IN A COMMUNICATION NETWORK"
APPLICANT( S) :
QUALCOMM INCORPORATED
OF 6455 LUSK BOULEVARD , SAN DIEGO, CALIFORNIA 92121 , USA.
STATE OF INCORPORATION : DELAWARE
INVENTOR(S) :
1. SAMIR S SOLIMAN .
Application No.
841/MAS/95
07 -Jul-95
Filed on
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES , 2003 ) PATENT OFFICE , CHENNAI BRANCH.
9 CLAIMS
A system for simulating signal interference between communication channels in a communication system in which users communicate information signals with other users over, a plurality of such communication channels, comprising means ( 150) for providing an electronic noise signal ; controller means (300) for generating a noise intensity controlled signal based on a determination of signal power transmitted by simulated users located within a first region of said communication system; and means ( 170) for adjusting the power of said noise signal in response to said noise intensity controlled signal .
10
TO/FROM PSTN
COMP.SPECN : 36 PAGES ; DRAWING : 7 SHEETS .
SYSTEM CONTROLLER AND SWITCH
TO/FROM OTHER CELL-SITES REFERENCE CITED : US 4901307
5103489 .
FIG. 1
12
14
266
206-
20
24 246
16
22
15 523 PART I-SEC. 2]
THE GAZETTE OF INDIA, FEBRUARY 21 , 2004 (PHALGUNA 2, 1925)
172F
192106
Ind . Cl .
IntCI :
D02G 3/00
D 01 H 7/00
"A METHOD AND A DEVICE FOR MANUFACTURING A TWISTED YARN"
APPLICANT( S) :
PALITEX PROJECT - COMPANYGmbh
WEESERWEG 60 , D - 47804
KREFELD, GERMANY
A GERMAN COMPANY.
1. JURGEN KALLMANN
INVENTOR(S) :
1015/MAS/95
Application No.
filedon 09-Aug-95
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS
( RULE 4 , PATENTS RULES , 2003 ) PATENT OFFICE , CHENNAI BRANCH .
6 CLAIMS
Amethod for manufacturing a twisted yarn , said method comprising the steps of: removing two rovings from two separate supplies ; passing each roving through a separate drawing device; ring- spining from each roving a separate spun yarn ; collecting each spun yarn as a bobbin on a yarn carrier of separate hollow spindles, wherein the separate hollow spindles are positioned atop one another; severing the spun yarns from the rovings withdrawing with formation of a yarn balloon from the bobbins the spun yarns and guiding each spun yarn through the hollow spindle axle of the respective hollow spindle; routing the spun yarn withdrawn from the upper one of the hollow spindles through the hollow spindle axle of the lower one of the hollow spindles ; guiding both spun yarns together to a winding device positioned below the lower one of the hollow spindles; rotating . the hollow spindles as a function ofthe winding speed ofthe winding device such that a twist ofthe spunfibers is at least, partially cancelled.
PAELITEX PROJECT - COMPACT ONE
3
15
COMP . SPECN .: 22 PAGES DRAWINGS : 2 SHEETS .
-11
REFERENCE: DE 4235433 , US 3425209 .
-5
23 23
17
21 524
THE GAZETTE OF INDIA , FEBRUARY 21 , 2004 ( PHALGUNA 2 , 1925) [PART III-SEC. 2
192107
40B
Ind . Cl .:
Int:CI4
B 01 J 32/00
"A PROCESS FOR THE PRODUCTION OF A CATALYST CARRIER "
NORTON.CHEMICAL PROCESS
APPLICANT( S) :
PRODUCTS CORPORATION 3855
FISHCREEK ROAD STOW, OHIO 44224 UNITED STATES OF AMERICA A US COMPANY
1. WILLIAM H. GERDES;
INVENTOR( S) :
2. DONALD J. REMUS;
3. THOMAS SZYMANSKI .
AF'PLICATION NO :
17 MAS 96
filed on 04-Jan-96 APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS . ( RULE 4, PATENTS RULES , 2003 ) PATENT OFFICE , CHENNAL BRANCH .
7 CLAIMS
A process for the production of a catalyst carrier which comprises mixing particulate ceramic components with 0.5 to 50 parts by weight, (based on 100 parts by weight of the ceramic components) , of a synthetic organic polymer burn out material such as herein described in the form of a powder having a volume average particle size of less than about 400 microns in an amount that is from 1 to 25% of the weight of the ceramic components and an ash content of less than 0.1 % by weight, and then firing at a temperature to atleast 1350°C sufficient to burn offf the synthetic organic polymer burn out material, sinter the particulate components and form a carrier with a surface area of from 0.4 to 1.5 m²/g and less than 1500 ppm of metallic leachables .
COMP.SPECN : 23
PAGES DRAWING : NIL SHEETS .
REFERENCE CITED : US 5100859 ; 5055442; 5037794 ; 4874739; 5266548 .
525 THE GAZETTE OF INDIA, FEBRUARY 21 , 2004 (PHALGUNA 2, 1925)
PART III-SEC . 2]
192108
40A 2/56 B
Ind. Cl .:
B05 B - 7 /04
IntCl :
C10G - 11 / 00
B01J - 19/26
"A FEED NOZZLE ASSEMBLY"
SHELL INTERNATIONAL RESEARCH
APPLICANT(S) :
MAATSCHAPPIJ B.V. CAREL VAN
BYLANDTLAAN 30 2596 HR THE
HAGUE
THE NETHERLANDS
1. YE-MON CHEN;
INVENTOR(S) :
2. THOMAS SEAN DEWITZ;
3. DAVID JON BROSTEN;
4. JAMES WAYNE NIELSON .
28-Feb-96
filed on
308MAS 96
APPLICATION NO :
USSN
07-Mar-95
ON
399868
CONVENTION NO :
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS
( RULE 4 , PATENTS RULES , 2003) PATENT OFFICE, CHENNAI BRANCH .
12CLAIMS
Afeed nozzle assembly for introducing gas, for example steam , and liquid, for example a heavy petroleum hydrocarbon, into a vessel, for example a catalytic cracking reactor, which feed nozzle assembly comprises:
(a) a nozzle body having a substantially cylindrical inner tube defining a gas conduit and an outer tube arranged around the inner tube , wherein the outer surface ofthe inner tube and the inner surface of the outer tube define an annular liquid conduit, andwherein each of the tubes have an inlet end and an opposite outlet end;
(b) a first nozzle tip fixedly attached to the outlet end of the inner tube having a substantially cylindrical inlet end attached to the outlet end of the inner tube and an opposite dome- shaped outlet end, which dome - shaped outlet end is provided with at least one passageway;
152155
(c) a second nozzle tip fixedly attached to the outlet end of the outer tube and arranged around the first nozzle tip , which second nozzle tip has a substantially, cylindrical inlet end attached to the outlet end ofthe outer tube and an opposite dome-shaped outlet end provided with at least one elongated slit having substantially parallel walls , which the dome-shaped outlet end of the second nozzle tip extends beyond the dome-shaped outlet end ofthe first nozzletíp. 145 142
150
1401
151
DRAWING: 7 SHEETS .
COMP.SPECN: 22 PAGES
141
310
-130 100
-135
-106
101
115 105-
-116
-136
120
FIG.1
125 526
[PART III-SEC. 2 THE GAZETTE OF INDIA , FEBRUARY 21 , 2004 (PHALGUNA 2 , 1925 )
Ind . Cl . :
32F 3(a)
192109
IntCl 4 :
C 07 C 41/28
"AMETHOD OF PRODOUCTION
OF AN ETHER COMPOUND "
APPLICANT(S) :
IDEMITSU KOSAN CO. ,LTD
1-1, MARUNOUCHI 3 -CHOME
CHIYODA- KU , TOKYO ,
JAPAN ; A JAPANESE COMPANPY
INVENTOR( S) :
1. TATSUYA EGAWA;
2. YESUHIRO KAWAGUCHI ;
3. KENJI MOGAMI ;
4. NOBUAKI SHIMIZU .
APPLICATIΟΝ ΝΟ :
1318MAS 97
filed on 18-Jun-97
Divisional to Patent Application No : 365/MAS/93
Ante-datedto 26th May, 1993
5 CLAIMS
Amethod of production of an ether compound expressed by the general formula
A
CHR35R36
C
B
R37
(XVI)
wherein A and B are each R33 O or a hydrogen atom and if A is R3O , B is a hydrogen atom , A is a hydrogen atom when B is R330, R33 is a hydrocarbon group or a hydrocarbon group such as methyl group, ethyl group, n - propyl group, iso -propyl group and the like containing ether oxygens in the main chains , in the side chain or in both of them, R35, R36 and R37 are a hydrogen atom, a hydrocarbon group, or a hydrocarbon group such as methyl group, ethyl group , n- propyl group , iso -propyl group and the Hike containing ether oxygens in the main chain , in the side chain or in both of them, R33, R36 and R37 are the same or different from each other, comprising reacting an acetal or a ketal compound expressed bythe formula
R330
CHR35R36
C
(XIV)
R330
R37
wherein R33 , R35 , R36 and R³ " are as defined in formula XVI with hydrogen in the presence of a known solid catalyst having acidic property and hydrogenating ability and thereafter recovering the ether compound produced in a known manner.
COMP.SPECN : 139 PAGES DRAWING : 53 SHEETS .
REFERENCE CITED : INDIAN : 365 MAS 93 ; 1319 MAS 93 .
527 THE GAZETTE OF INDIA, FEBRUARY 21 , 2004 (PHALGUNA 2, 1925)
PART III-SEC. 2]
192110 206 E
Ind. Cl.:
Η 04 Q 7/30
IntCI :
"A BASE STATION TRANSCEIVER SYSTEM FOR RECEIVING A RE ERSE LINK RADIO FREQUEN Y SINGNAL"
QUALCOMM INCORPORATED
APPLICANT( S) :
STATE OF INCORPORATION - DELAWARE
6455 LUSK BOULEVARD
SAN DIEGO CALIFORNIA 92121
USA
1..KLEIN S GILHOUSEN ;
INVENTOR( S) :
2. ROBERT PADOVANI;
3. LINDSAY A WEAVER JR.
817MAS00
Filed on 28-Sep-00
APPLICATION NO:
Divisional to Patent Application No: 984/MAS/94
Ante-datedto 11th Sep, 1994
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4, PATENTS RULES , 2003 ) PATENT OFFICE , CHENNAL BRANCH.
4 CLAIMS
Abase station transceiver system comprising a transmitter subsystem and a receiver subsystem for receiving a reverse link radio frequency signal said, receiver subsystem comprising a first demodulation element for converting said reverse link radio frequency signal to a first demodulated signal ; a second demodulation element for converting said reverse link radio frequency signal to a second demodulated signal ; a combiner for combining said first and second demodulation signals to produce athird demodulated signal ; a decoder for converting said third demodulated signal to digital data; a first receive processing system for receiving said reverse link radio frequency signal in conjunction with a first set of other reverse link radio frequency signals, and for providing said reverse link radio frequency signal and said first set of other reverse link radio frequency signals to said first demodulation element; and a second receive processing system for receiving said reverse link radio frequency signal conjunction with a second set of other reverse, link radio frequency signals, and for providing said reverse link radio frequency signal and said second set of other reverse link radio frequency signals to said second demodulation element.
CONTROLLEK
ORIGINAL
2330
677/MAR/2000
232A
212
TRANSMIT PROCESS
TRANSMET PROCESSING
TRANSIT PROCESSING
25OCT2002
MODULA
MODULATION BLEMENT
MOBILE
MODULATION BLUSHENT
234
INTERFACH PORT
COMBINE
PROCESSING
2044
DACODER
DEMODULATION ELEMENT
PROCER
THEMODULATION ELEMENT
DEMODULATION OLEMENT
FIG.3
PAGES DRAWING: 4 SHEETS.
COMP.SPECN : 21
REFERENCE CITED: US 5056109 ; 5267261 . 00.916MAS 00 528
[PART III-SEC. 2 THE GAZETTE OF INDIA, FEBRUARY 21 , 2004 (PHALGUNA 2, 1925)
IND . CL .
: 170 D
192111 INT . CL .
: C 11 D 9/06
TITLE
: IMPROVED DETERGENT BAR COMPOSITIO .
:
APPLICANT
HINDUSTAN LEVER LIMITED , HINDUSTAN LEVER HOUSE, 165/166 BACKBAY RECLAMATION, MUMBAI -400 020
MAHARASHTRA , INDIA . AN INDIAN COMPANY
INVENTOR
1. FAKHRUDDI ESMAIL PACHA
2. VEDANTAM VENKATESWARA KUMAR
:
INTERNATIONAL APPLICATION NO
: 45 BOM 1999 DATED 18. 01 1999
INDIAN APPLICATION ΝΟ .
COMPLETE SPECIFICATION FILED AFTER PROVISIONAL LEFT ON 17.01.200 PRIORITY NO .
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE- PATENTS RULES 2003 ) , PATENT OFFICE BRANCH, MUMBAI - 13 .
7 CLAIMS
A synergistic detergent composition comprising 0.1 to 5 wt% of scr . 5- 40 wt% of non soap detergent active component selected from the gaup comprising anionic, nonionic , cationic, zwitterionic detergent active or mixtures thereof. said bar composition being essentially free com dihydric alcohol and comprising from 15-45 wt % of at least e abrasive , preferably selected from the group comprising mixture of calcium and magnesium carbonates , potassium sulphate. alumina hydrated alumina, feldspars , talc , silica and mixtures thereof.
Prov . Spen . 14 pages
Drawings - Nil - sheet Cornp.specn .: 18 pages
Drawings - Nil - sheet 529 THE GAZETTE OF INDIA, FEBRUARY 21 , 2004 (PHALGUNA 2, 1925)
PART III-SEC. 2]
192112
:
IND . CL .
В 21 B -031/ 07
:
INT . CL.
: A ROLLING MILL FOR FORMING A PLATE AND STRIP.
TITLE
APPLICANT & INVENTORS
: ZHENG HONGZHUAN AND ZHAO LINZHEN BOTH ARE CHINESE BY NATIONALITY AND BOTH RESIDING AT BLDG. 3 , NO.14, JINGQI RD. ,ZHENGZHOU CITY , HENAN PROVINCE 450 002, CHINA.
DATED
:
INTERNATIONAL APPLICATION NO
:
156/BOM/ 1999 DATED 03.03.1999
INDIAN APPLICATION NO .
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4 , PATENTS RULES 2003 ) , PATENT OFFICE BRANCH , MUMBAI - 13 .
14 CLAIMS
Arolling mill for forming a plate and strip comprising:
amill frame;
(i)
(ii) a upper roll system and a lower roll system arranged in a tower like configuration with the mill frame:
(iii) said roll systems comprising a working roll , intermediate rolls and supporting rolls;
(iv) an upper roll support and a lower roll support for supporting the upper roll system and the lower roll system;
(v) an intermediate supporting device disposed between the mill frame and the roll supports wherein:
the mill frame, the roll support and the said intermediate supporting device in combination form a two dimensional support system wherein:
the said intermediate supporting device is disposed on atleast one of the upper an lower roll supports and arranged in the middle region along the axis of the working roll, with length not more than that of the working roll .
Drawings: 9 sheets Comp.specn.: 19 pages
6-467GI/2003
Με - 1 530
THE GAZETTE OF INDIA, FEBRUARY 21 , 2004 (PHALGUNA 2, 1925) [PART III-SEC. 2 IND . CL .
192113
: 32C
INT . CL .
: C 12 Q 1/60, 1/00 G 01 N 33/92 , 33/33
TITLE
: PROCESS FOR IDENTIFICATION OF ORGANIC MATERIAL IN SURFACTANT CONTANING COSMETIC CLEANSER USING BIOLOGICLE ASSAY..
APPLICANT
: HINDUSTAN LEVER LTD HINDUSTAN LEVER HOUSE, 165-166 BACKBAY RECLAMATION , MUMBAI - 400 020, INDIA AN INDIAN CO . MAHARASHTRA .
INVENTORS
:
1. MONIKA DITTMER
2. JAN KRUSE
3. FRANK MEYER
INTERNATIONAL : APPLICATION NO
INDIAN
: 188/MUM / 1999
DATED 17.03.1949
APPLICATION NO .
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4, PATENTS RULES 2003 ) PATENT OFFICE BRANCH , MUMBAI - 13 .
17 CLAIMS
A process for identifying the presence of an organic material such as lipids . carbohydrates , proteins , peptides , vitamins , organic sunscreens and mixtures thereof, in a surfactant- containing medium which contains at least 1% by weight surfactant, using biological assay method comprising contacting enzymes or immunological agents with the medium, which is a cosmetic cleanser, containing the surfactant in a liquid or dissolved form and providing a signal thereafter indicative of presence of said organic material .
Complete Specification - 11. Pages ;
Drawing -NIL 531 PART III-SEC . 2]
THE GAZETTE OF INDIA, FEBRUARY 21 , 2004 (PHALGUNA 2, 1925 )
113H + I
IND . CL .
:
192114
F 21 Q 1/00
:
INT . CL .
:
TITLE
A NOVEL SYSTEM FOR TRANSMITTING LIGHT TO ROAD SINGAL OR LIGHTS OF AN AUTOMOBILE.
MALSHE VINOD CHINTAMANI
:
APPLICANT & INVENTORS
I , STAFF QUARTERS , UDCT CAMPUS
MATUNGA , MUMBAI - 400 019.
MAHARASHTRA , INDIA .
INDIAN NATIONAL
IDEM
:
INTERNATIONAL APPLICATION NO
INDIAN APPLICATION NO . : 204/BOM/ 1999 .
DATED 22/03/1999 .
Complete Specification filed after provisional specification on 21.03.2000
PRIORITY NO .
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4. PATENTS RULES (2003) , PATENT OFFICE BRANCH , MUMBAI - 13 .
02 CLAIMS
Anovel system for transmitting light to road signals or lights of an automobile comprising of an intense single light sourcehoused in an air cooled cabin , a computerized light filter provided in front ofthe said light source, insidethe cabin for selecting the desired colour of light for a desired interval , a plurality ofdiffusers provided at the point ofuse andthe said diffusers being connected to the computerized light filter with the help of fiber optic cables.
Complete specification: 08 pages
Drawings 01 sheets
Provisional specification :05 pages
Drawings Nii sheets .
FIG 2 [PART III-SEC. 2 532
THE GAZETTE OF INDIA, FEBRUARY 21 , 2004 (PHALGUNA 2, 1925)
192115 : 185 E
IND . CL .
:
INT. CL .
A 23 F 3/14 3/40
: A PROCESS FOR MANUFACTURING BLACK TEA .
TITLE
: HINDUSTAN LEVER LIMITED . ,
HINDUSTAN LEVER HOUSE ,
APPLICANT & INVENTORS
165/166 BACKBAY RECLAMATION , MUMBAI - 400 020.
MAHARASHTRA , INDIA .
AN INDIAN COMPANY .
1. NAVIN KUMAR SHARMA .
2. ANITHA RAO .
3. PADMA BALAKRISHNAN .
INTERNATIONAL APPLICATION NO :
:
DATED 06/05/1999 .
339/BOM/ 1999 .
INDIAN APPLICATION NO .
Complete Specification filed after provisional specification on 28.04.2000 .
:
PRIORITY NO .
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4 , PATENTS RULES 2003 ) , PATENT OFFICE BRANCH , MUMBAI - 13 .
11 CLAIMS
Aprocess for manufacturing black tea comprising the steps of macerating the withered or freshly plucked tea leaves , allowing them to ferment. firing the leaves to arrest fermentation and the drying them to yield black tea , the process being characterized in that the plucked tea leaves are treated with jasmonic acid or one or more derivatives thereof to enhance aroma.
Drawings Nil sheet.
Complete specification: 12 pages
Drawings Nil sheet .
Provisional specification :10 pages 533
(PHALGUNA 2, 1925)
PART III-SBC. 2] THE GAZETTE OF INDIA, FEBRUARY 21 , 2004
192116
: 32 C
IND . CL .
:
INT . CL .
C-07 K 16/00
C 12 N 15/13
TITLE
: A METHOD OF PREPARING AN EXPRESSION LIBRARY.
APPLICANT
: HINDUSTAN LEVER LIMITED ,
HINDUSTAN LEVER HOUSE , 165/166 BACKBAY RECLAMATION , MUMBAI - 400 020
MAHARASHTRA , INDIA . AN INDIAN COMPANY
INVENTORS .
1 ) FRENKEN, LEO GERARDUS JOSEPH
2) LOGT, CORNELIS PAUL ERIK VAN DER
: PCT/EP99/ 00481 DATED 25.01.1999
INTERNATIONAL APPLICATION NO
IN /PCT/2000 /00217 /MUM DATED 25.07.2000
INDIAN APPLICATION NO . :
PRIORITY NO .
:
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4 , PATENTS RULES 2003 ) , PATENT OFFICE BRANCH , MUMBAI - 13.
7 CLAIMS
Amethod of preparing an expression library comprising providing a repertoire of mRNA from a non- immunised source , treating the obtained RNA with a reverse transcriptase to obtain the corresponding cDNA and cloning the cDNA , with or without prior PCR amplification , into an expression vector .
Drawings - 8 - sheets
Comp.speen.: 23 pages 534
THE GAZETTE OF INDIA , FEBRUARY 21 , 2004 (PHALGUNA 2, 1925 ) [PART III-SEC. 2
192117
IND . CL .
: 39 C
INT . CL .
: B 01 J - 21 /06 , C01 C - 1/04
TITLE
: CATALYST FOR THE SYNTHESIS OF AMMONIA FROM HYDROGEN AND NITRGEN.
APPLICANT
: NORSK HYDRO ASA, A NORWEGIAN COMPANY, N - 0240 , OSLO , NORWAY .
INVENTORS
1. TERJE FUGLERUD
2. PER TORBJORN SKAUGSET
:
PCT/NO 99/00008 DATED 11.01.1999
INTERNATIONAL APPLICATION NO
: IN/PCT/2000/00387/ MUM DATED 11.09.2000
INDIAN APPLICATION NO .
PRIORITY NO .
: 19981118 DATED 13.03.1998
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4 , PATENTS RULES 2003 ) , PATENT OFFICE BRANCH, MUMBAI - 13 .
03 CLAIMS
A catalyst composition for the synthesis of ammonia from hydrogen and nitrogen comprising iron oxides and promoters of Al , K, Ca and Mg oxides , characterized in that it further comprises promoters of cobolt oxide and titanium oxide where the concentration of cobalt is between 0.1 % and 3.0% by weight of metal and the concentration of titanium is between 0.1 % and 1.0% by weight of metal .
Comp . specn.: 09 pages
Drawings : NIL 535 THEGAZETTE OF INDIA, FEBRUARY 21 , 2004 (PHALGUNA 2, 1925)
PART III-SEC . 2]
192118
145 C
:
IND . CL
: B 32 B 3/28
INT . CL .
TITLE
: A DOUBLE FLUTED CORROUGATED MULTIPLY PAPER LINER AND A MULTI PLY PAPER BOARD AND MACHINE AND METHOD FOR MAKING THE SAME .
PODDAR KALIPRASAD
:
APPLICANT & INVENTORS
14 , ISHWAR BHAVAN ' A ' ROAD , 3RD FLOOR, CHURCHGATE , MUMBAI - 400 020 . MAHARASHTRA , INDIA .
INDIAN NATIONAL .
IDEM
INTERNATIONAL APPLICATION NO :
DATED 23/07/2001 .
706/MUM/2001 .
:
INDIAN APPLICATION NO .
Complete Specification filed after provisional specification on 17.05.2002
PRIORITY NO . :
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4. PATENTS RULES 2003) , PATENT OFFICE BRANCH , MUMBAI - 13 .
40 CLAIMS
Adouble fluted corrugated multi ply paper liner for making a double fluted corrugated muiti ply paper board comprising at least one double fluted corrugated 3 -ply liner consisting of a pair ofcorrugated papers placed one above the other with their flutes corrugations parallel to each other and pasted together and a plain paper pasted on one side of the said pair of corrugated paper.
Drawings 10 sheets
Complete specification: 24 pages
Drawings 05 sheets.
Provisional specification :08 pages
נט 536
[PART III-SEC. 2 THE GAZETTE OF INDIA , FEBRUARY 21 , 2004 (PHALGUNA 2 , 1925)
192119 IND . CL.
: 83 A2
INT. CL .
: A 23 D- 7/ 15
TITLE
: A PROCESS FOR THE PREPARATION OF A FAT SPREAD WITH GOOD AROMA AND GRAININESS .
APPLICANT
: HINDUSTAN LEVER LIMITED , HINDUSTAN LEVER HOUSE, 165/166 BACKBAY RECLATION , MUMBAI 400 020, MAHARASHTRA, INDIA . AN INDIAN COMPANY .
INVENTORS
: ( 1 ) CHANDRASEKARAN KRISHNAMOORTI
(2) SATHE VASANT SUHAS
(3 ) DATEY ATUL
(4) KANNAN JAGADEESAN
(5) GOYAL PARAS
DATED--
INTERNATIONAL APPLICATION NO :
INDIAN
:
137 MUM 2001 DATED 07.02.2001
APPLICATION NO . Complete specification filed after provisional specification on: 29.01.2002
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4, PATENTS RULES 2003 ) , PATENT OFFICE BRANCH , MUMBAI - 13 .
08 CLAIMS
A process for the preparation of a fat spread with good aroma and graininess comprising the steps of:
emulsifying the first part of the fat phase comprising milk fat with an aqueous phase to form a pre -emulsion
chilling the pre -emulsion to form a stabilized pre - emulsion
mixing the stabilized pre - emulsion under low shear with the second part of the fat phase wherein the fat phase has been obtained by heating butter or concentrated cream containing 50 to 90% milk fat at 100-140 degree centigrade and the shear does not exceed Reynolds Number 10,000, optionally the said milk fat may be substituted by a vegetable fat.
Drawings : 3 sheets
Prov. Specn . 11 pages
Drawomgs: 3 sheets
Comp.specn . 13 pages 537 THE GAZETTE OF INDIA, FEBRUARY 21 , 2004 (PHALGUNA 2, 1925)
PART IB Sac. 2 ]
192120
55 D2
ANINDECL.
A 01 Ν 25/00, 27/00
INT.CL.
TITLE
: PROCESS FOR MAKING INSECTICIDE VAPORISING MAT .
APPLICANT
:OFGODREJ SARALEE LTD., PIROJSHANAGAR , EASTERN EXPRESS HIGHWAY, VIKHROLI ( E) , MUMBAI 400079 , MAHARASHTRA, INDIA . AN INDIAN COMPANY .
INVENTORS
: 1 ) PUTHUCODE RAMA IYER KASI VISWANATHAN 2) JEMINI RAJKUMARNAIR
3) ASHWINI BABRE
4) DADASAHEB SAWANT
-DATED
INTERNATIONAL "APPLICATION NO
:14145/ MUM/2002 DATED 18.02.2002
INDIAN AFAPPLICATION NO .
AAPPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4, PATENTS RULES 2003 ) PATENT OFFICE BRANCH , MUMBAI - 13.
10 CLAIMS
A process for preparing an insecticide vaporizing mat comprising the steps of impregnating insecticide solution , on a solid substráte such as cellulosic material and attaching to one side of the said solid substrate , a thin layer of metallised polymeric sheet by means of adhesive .
Drawings: Nil
Compispecn . 10 pages
7467/2003 538
THE GAZETTE OF INDIA , FEBRUARY 21 , 2004 (PHALGUNA 2, 1925) [PART III-SEC. 2 Ind.Cl
192121 Int.Cl'
:
G03G 9/09 C09D 11/00 C08J 5/42
Title
:
A PROCESS FOR PREPARING AN ELECTROPHOTOGRAPHIC TONER OR DEVELOPER OR POWDER COATING COMPOSITIONS Applicant : CLARIANT GMBH, PATENTE, MARKEN , LIZENZEN OF BRUNINGSTRASSE 50, 65929, FRANKFURT AMMAIN , GERMANY Inventor :
1. DR. HANS - TOBIA MAÇHOLDT.
2. DR. DIETER BAUMGART .
3. DR. RUDIGER BAUR.
Application no. 909/CAL/ 1997 FILED ON 20.05.1997
(CONVENTION NO. 19623565.0 FILED ON 13.06.1996 IN GERMANY.)
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)
PATENT OFFICE KOLKATA.
4 CLAIMS.
A process for preparing electrophotographic toner or developer , powder or powder coating composition comprising
Adding the azo pigment such as " C.1 . pigment 57.1 " and 0 to 20% by weight of a charge control agent such as herein described into the binder from 0.01 to 50%by weight of the azo pigment.
Complete Specifications : 34 pages.
Drawings: NIL 539 THE GAZETTE OF INDIA, FEBRUARY 21 , 2004 (PHALGUNA 2, 1925)
PART III-SEC . 2]
192122
129 G
:
Ind. Cl.
B23B 51/00
:
Int.Cl'
:
Title
METAL CUTTING DRILL WITH INSERT HAVING RADIALLY OVERLAPPING CUTTING EDGES .
SANDVIK AKTIEBOLAG, OF S- 811 81 SANDVIKEN, SWEDEN .
Applicant :
ANTHONY YAKAMAVICH JR.
Inventor :
529/CAL/1999 FILED ON 08.06.1999
Application no.
(CONVENTION NO. 09/115,636 FILED ON 15.7.1998 IN UNITED STATES OF AMERICA.)
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)
PATENT OFFICE KOLKATA.
8 CLAIMS.
Ametal cutting drill with insert having radially overlapping
cutting edges comprising:
a drill body including a shank and a head disposed at a forward end of the shank, a passageway extending longitudinally forwardly through the shank and connected to a pair of throats extending rearwardly from a front face of the head, and a recess formed in the front face, the recess overlapping a longitudinal axis of the drill body; and an insert formed of a harder material than the drill body, the insert brazed in the recess and including a plurality of spaced apart cutting edges disposed on opposite sides of the axis and situated circumferentially behind respective ones of the throats , the cutting edges overlapping each other radially during a drilling operation , one of the cutting edges projecting radially outwardly beyond a side face of the head , and another of the cutting edges terminating radially inwardly of the side face.
Drawings: 3 sheets
CompleteSpecifications : 10 pages.
540
THE GAZETTE OF INDIA , FEBRUARY 21 , 2004 (PHALGUNA 2 , 1925)
[PART III-SEC . 2 Ind.Cl
:
170D
192123 Int.Cl
:
C09G 1/06
Title
A PROCESS FOR COMBINED CHEMICAL POLISHING AND ETCHING OF PLAIN CARBON STEELS, LOWALLOY STEELS AND CAST IRON SAMPLES .
Applicant
PROF . SANJOY SADHUKHAN , OF BF - 194, SECTOR - I, SALT LAKE CALCUTTA 700 064, WEST BENGAL, INDIA
Inventor
PROF . SANJOY SADHUKHAN
Application no. 624/CAL/ 1997 FILED ON 10.04.1997
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)
PATENT OFFICE KOLKATA.
3 CLAIMS
A process for combined chemical polishing and etching of plain carbon steels, low alloy steels and cast iron samples for testing purposes , comprising the steps of:
i . Flattening the sample in the conventional belt grinders;
ii . Stirring the sample of step ( i) in chemical bath consisting of:
Distilled water
93% to 96.5 % by volume
Hydrogen Peroxide
3.5 % to 7% by volume
Oxalic acid
15 to 30 gms/litre solution
At a temperature range 25°C to 55 °C for a period of 3 to 5 minutes; and
washing and drying the sample.
CompleteSpecifications : 6 pages.
Drawings: NIL 541 THE GAZETTEOF INDIA, FEBRUARY 21 , 2004 (PHALGUNA 2, 1925).
PART III-SEC. 2]
192134 Title
A SYNCHRONIZER RING CAPABLE OF PERFORMING . SYNCHRONOUS SLIDING OPERATION .
Applicant : NIPPON PISTON RING CO . LTD, OF 2-6 KUDANKITA , 4-CHOME, CHIYODA-KU, TOKYO- TO, JAPAN
1. TAKAO OMIYA
Inventor
2. KUNIHIRO MUCHI .
3. TETSUO MASUYAMA.
947/CAL/1997 FILED ON 26.5.1997
Application no.
(CONVENTION NO. 8-136080 AND 8-267181 FILED ON 30.5.1996 AND 8.10.1996 IN JAPAN) APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)
PATENT OFFICE KOLKATA
6 CLAIMS
KO
A synchronizer ring capable of performing synchronous sliding operation with and separating operation from a rotating object member, comprising a main body having gear portions and composedof a sintered iron alloy prepared by-
a. Pulverizing graphite , metallic copper and iron to a particle size of upto 150 mesh in a suitable pulverizer or disintegrator,
b. Blending the pulverized, powdery raw materials under normal mixing conditions and pressing the same at a pressure ofaround 6 tonne/cm² to form a green compact
c. Sintering the green compact a temperature ranging between 1000 °C and 1200°C for a period of75 to 90 minutes to obtain an iron sintered alloy and
d. Depositing a free copper phase in a pearlitic matrix structure by methods known per se in which
The Fe-sintered alloy matrix comprises-
Carbon-from 1.2 wt% to 2.0 wt%
Copper from 15 wt% to 25 wt%
And the balance being iron and incidental impurities, and the matrix ofthe said synchronizer ring comprises a fine peralite structure and a precipitated free copper phase and contains no bainite.
Drawings: 2. sheets
CompleteSpecifications : 20 pages.
542
[PART III-SEC. 2 THE GAZETTE OF INDIA, FEBRUARY 21 , 2004 (PHALGUNA 2, 1925 )
Ind . Cl .
192125 Int.Cl'
: C2ID 9/04, E01B7/00
Title
:
RAILROAD TRACK PART AND PROCESS FOR MANUFACTURE OF THE SAME .
Applicant :
BWG BUTZBACHER WEICHENBAU GMBH, OF WETZLARER STRASSE 101 , 35510, BUTZBACH, GERMANY
Inventor :
I. ALFRED KAIS .
2. GERHARD RATZ
3.
DR. WALTER KUNITZ
Application no . 950/ CAL/ 1997 FILED ON 26.5.1997 (CONVENTION NO. 19621018.6 FILED ON 24.5.1996 IN GERMANY.)
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003) PATENT OFFICE KOLKATA .
14 CLAIMS .
Arailroad track part, in particular a points part such as a frong ( 14) , that comprises joinable section (22 , 24 ; 28,30 ; 32, 34) of differing materials , with the sections being subjected to a joint heat treatment after being joined,
Wherein
The railroad track part has , viewed in the longitudinal direction of the track, in some areas a layered structure such that a base section (22, 28,1 34 ) had disposed on it a top section (24, 30, 32) joined thereto and directly traversable by rolling stock, said top section comprising a high - strength steel, with the joined sections being jointly heat- treated such that top section has tensile strength Rm2 between 1700 and 2200 N/nm² and/or a limit of elasticity Rez between 1600 and 1800 N/mm² .
Complete Specifications : 12 pages. Drawings: 2 sheets 543 THE GAZETTE OF INDIA, FEBRUARY 21 , 2004 (PHALGUNA 2, 1925)
PART III-SBC. 2]
192126 :
Ind.Cl
C07C 15/00 C10G 51/02
:
Int.Cl
Title
PROCESS FOR PRODUCING LOWER OLEFINS AND HIGH PURITY AROMATICS .
Applicant :
PHILLIPS PETROLEUM COMPANY, OF BARTLESVILLE STATE OF OKLAHOMA, UNITED STATES OF AMERICA .
1. CHARLES ALFRED DRAKE .
:
Inventor
2. EDWARD LAWRENCE SUGHRUE II .
JAMESB . KIMBLE .
3.
1095/cal/ 1997 FILED ON 10.6.1997
Application no.
(CONVENTION NO. 08/692, 218 FILED ON 06.08.1996 IN UNITED STATES OF AMERICA.) APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)
PATENT OFFICE KOLKATA.
10 CLAIMS.
Aprocess for producing lower olefins and high purity aromatics from a hydrocarbon feedstock, wherein the concentration of paraffins in said hydrocarbon feedstock exceeds the combined content of olefins , naphthenes and aromatics in said hydrocarbon feedstock, said process comprises the steps of:
contacting said hydrocarbon feedstock containing one or more non- aromatic hydrocarbons containing 5-16 carbon atoms per molecule selected from the group consisting of alkanes, alkenes and cyclo- alkanes with a first zeolite catalyst Such as herein described in a first reaction zone under conditions such that the weight hourly space velocity of said hydrocarbor1 feedstock about 5 hr¹ soas to produce a first reaction product; separating said first reaction product into a first lower boiling fraction containing hydrogen gas, lower alkanes , and lower alkenes and a first higher-boiling fraction containing aromatic hydrocarbons;
contacting said first higher-boiling fraction with a second zeolite catalyst Such as herein described in a second reaction zone under conditions such that the weight hourly space velocity of said first higher-boiling fraction is less than about 10 hr¹ so as to produce a second reaction product; separating said second reaction product into a second lower- boiling fraction containing hydrogen gas, lower alkanes and a second higher- boiling fraction containing aromatic hydrocarbons selected from the group consisting of benzene, toluene , zylene , ethybenzene and 544
[PART III-SEC. 2 THE GAZETTE OF INDIA, FEBRUARY 21 , 2004 (PHALGUNA 2, 1925 )
mixtures of two more thereof;
and adjusting the conditions of in said first reaction zone and said second reaction zone such that the weight hourly space velocity in said second reaction zone is about 2 hr or more below the weight hourly space velocity in said first reaction zone and such that the pressure of said second reaction zone is maintained at 10 psi higher than the pressure of sald first reaction zone, to produce said second higher boiling fraction having a concentration of aromatic hydrocarbons of about 80 wt% or more .
CompleteSpecifications : 25 pages.
Drawings: 1 sheets 545 THE GAZETTE (OF INDIA, FEBRUARY 21 , 2004 (PHALGUNA 2, 1925)
PART I-SEC . 2]
192127 204
:
Ind.Cl
GOIG - 11 /00
:
Int.Cl
GALVANIZATION COATING WEIGHT CONTROLLER.
:
Title
Applicant :
1. HITACHI , LTD , OF 6, KANDA, SURUGADAI 4 - CHOME, CHIYODA - KU, TOKYO 101 , JAPAN .
2. POOHANG PRON & STEELCO . LTD . OF NO . 1 KOEDONG-DONG PCHANG , KOREA 790-785
2. YASUO MOROOKA .
MASAHIRO KAYAMA. 1.
:
Inventor
4. AKIRA HIRAOKA.
3. TETSUYA HOSHI .
6. YOO JAE SHIN
5. HIROSHI SUGAWARA
8. SONG, CHAN WOO
7. KIM DAE HYEUK
10. SON YONG GU .
9. HWANG GYU SAM
1211 /CAI /1997 FILED ON 25.6.1997
Application no.
(CONVENTION NO. 8-174978 , FILED ON 04.07.1996 IN JAPAN.)
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)
PATENT OFFICE KOLKATA.
7 CLAIMS.
A galvanization coating weight controller for controlling coating weight of metal deposited on a strip , comprising :
reference calculating a means control which has a control model for predicting the coating weight from state variables of a target calculates combination of a gas pressure and a no position which realizes a target coating weight by us ang the control model , and generates the gas pressure and che nozzle position as references ,
observation means for predicting the coacing weight from the obtained state variables of the control target by using the control model ,
... observation control means for checking the target coating weightwith an output of said observatior , means and for modifying the reference gas pressure or the reference nozzle position
when there is a deviation between the target coating weight and 8467 GI/2003 546
THE GAZETTE OF INDIA, FEBRUARY 21 , 2004 (PHALGUNA 2, 1925 ) [PART III-SEC. 2 deviation; and
modification function calculating means for calculating a predetermined relational value between a coating weight and the gas pressure or the nozzle position ,
CONTROL COMPUTER 148
143
141
140
COMMUNI . UW 144
130
COMMUNI . UP
101
100
1,07
MODI, PUM
104
OBBER MEANS 103
P108
POHY
OUTPLITMEANS INPUT MEANS102
CONTROL
151
FOLL
182
184
NOZZLE
183
said controller optionally comprising a galvanization coating weight detecting means for measuring coating weight of metal coated on a strip , a model error accumulating means for accumulating the difference between an output of the control model and the actually detected coating weight , a profile storing means for securing sequential value , a coating weight correcting means for connecting the detected coating weight , an observation result storing means for accumulating outputs of said observation means and an observation result extracting means for calculating an elapsed time .
Complete Specifications : 37 pages.
Drawings: 14 sheets 547 PART III-SEC . 2]
THE GAZETTE OF INDIA, FEBRUARY 21 , 2004 ( PHALGUNA 2 , 1925 )
Ind.Cl
192128 108 C (2,5 ) XXX III (5 ), 12C XXX III (2 ) , 33A XXX III (3 )
Int.Cl ' :
C21D 8/02, C 21D 9/52, C 21D 9/56 , C21C 5/52 , F27B 3/00
Title
:
AN IMPROVED PROCESS FOR MANUFACTURING HOT ROLLED STEEL STRIPS OF INCREASED STRENGTH, CORROSION RESISTANCE AND IMPROVED BEND FORMABILITY .
Applicant :
STEEL AUTHORITY OF INDIA LIMITED, OF ISPAT BHAWAN LODI ROAD , NEW DELHI - 110003 , INDIA,
Inventor :
1 . MADAN LAL NARULA .
2. MAN MOHAN SINGH SODHI .
3. MRIDUAL KUMAR SARDAR.
4.
SAJAL KANTI CHAUDHURI
5. SANAK MISHRA .
1991 /CAL/ 1997 FILED ON 23.10.1997
Application no.
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)
PATENT OFFICE KOLKATA.
8 CLAIMS.
An improved process for manufacturing hot rolled steel strips of increased tensile strength , corrosion resistance and improved bend formability , characterised in that (a) molten steel of chemical composition ( by weight % ) : C-0.07 to 0.10 , Ma-0.25 to 0.45, 81-0.30 to 0.45 , 3-0.02 max , P-0.075 to 0.145, Ou -0.30 to 0.45 , N1-0.28 to 0.54 , Cr-0.35 to 0.60 , Al-0.03 to 0.08 , Nitrogen 0.008-0.0012 and Fe- the balance , is produced in an electric aro furnace ( EAF) lined with basio refractory , from steel scraps with addition of required quantities of alloying materials Fe -Si , Fe -Mn , Fe-P, Fe-Cr , Ni , Cu and Al; ( b ) tapping the molten steel into vacuum aro degassing ( VAD) ladle fitted with porous plug at the bottom with continuous argon injection and covering the molten steel with known vermiculate powder ; ( c) adding aluminium and calcium silioide to the molten steel as required for killing the steel by fixing the nitrogen content thereof as aluminium nitrides and maintaining sulphur content thereof at 0.02% max .: (d) oasting the molten steel into slabs in a horizontal continuous casting machine ( HCC ) and shrouding the slabs with ceramic to prevent oxidation thereof; ( e) soaking the slabe in a re -heating furnace at 1280° C in an atomosphere of 0.5% oxygen ; (f) de-scaling the slabs with high pressure water jets ; ( g ) hot rolling the slabe into strips of required thiokness ; ( h) hot finishing the strips at 870-890° C; ( 1 ) delayed water cooling and coiling the strips at 660-680 ° C; and ( j ) allowing the coils to cool to ambient temperature in natural air .
Drawings: NIL
CompleteSpecifications : 8 pages.
[PART II-SEC. 2 548
THE GAZETTE OF INDIA , FEBRUARY 21 , 2004 (PHALGUNA 2, 1925)
192129 206E
Ind.Cl :
H04B 1/66
Int.Cl
IMPROVED SCALBLE AUDIO CODING /DECODING APPARATUS .
Tile
Applicant
SAMSUNG ELECTRONICS . CO . LTD . COF 416, MAETAN- DONG PALDAL - GU , SUWON -CITY, KYUNGKI -DO , REPUBLIC OF KOREA YEON - BAE KIM
biventor
2461/CAL/1997 FILED ON 29.12.1997
Application no.
(CONVENTION NO. 97-12233 FILED ON 02.04.1997 IN REPUBLIC OF KOREA .)
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)
PATENT OFFICE KOLKATA.
10 CLAIMS .
scalable audio coding apparatus for coding audio signals to have layered bitrate data having bitrates of a predetermined number, comprising:
a quantizing portion for signal - processing input audio signals and quantizing the same for each coding band; and a bit packing portion for generating bitstreams by coding gamut bit allocation information for each subband of a base layer , representing the number of bits of quantized data ofthe respective subbands belonging to the base layer, index representing the presence ofdata for predetermined frequency components of the quantized data corresponding to the number of bits allocated to the respective subbands , quantization step size and the quantized data , and coding gamut bit allocation information , index, quantization step size and quantized data of the next layer after completing coding of the base layer, to perform coding on all layers .
018
Drawings: 12 sheets
Complete Specifications : 32 pages .
549 PART I -SEC. 2]
THE GAZETTE OF INDIA, FEBRUARY 21, 2004 (PHALGUNA 2, 1925)
192130 :
206-E
:
Ind.Cl
:
G01 F 23/26
Int.Cl'
:
Title
AN IMPROVED APPARATUS USING NON- CONTACT CAPACITANCE TRANSDUCER FOR DETERMINING LIQUID LEVEL .
Applicant :
DR. SATISH CHANDRA BERA, OF DEPT . OF APPLIED PHYSICS UNIVERSITY COLLEGE OF TECHNOLOGY, 92, ACHARYA PRAFULLA CHANDRA ROAD , KOLKATA - 700 009 , WEST BENGAL, INDIA.
DR. SATISH CHANDRA BERA
Inventor
09/CAL/2002 FILED ON 02.01.2002
Application no.
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE4, PATENTRULES2003)
PATENT OFFICE KOLKATA.
13 CLAIMS.
An improved apparatus using non -contact capacitance transducer for determining liquid level in combination,
i. An uniform hollow cylinder ( 1 ) made of insulating material;
ii . An outer double layer (2) non - inductive short circulated coil, wound around ( 1) above
iii . A level sensing probe (3 ) connected to the bottom ofi) above and to the vessel/receiver (8) holding the liquid through a connecting pipe/tube (7);
iv. A support bracket (4) supporting the insulating tube (i) above, and connected to the overflow line ofthe vessel/receiver containing the liquid;
v. Amodified operational amplifier (5) based on De Sauty bridge or other suitable circuit and (vi) lead wires (6) from the coil (ii) and level sensing probe (iii ) to the operational amplifier (v)
Drawings: 4 sheets
CompleteSpecifications : 18 pages .
550
[PART III-SEC. 2 THE GAZETTE OF INDIA, FEBRUARY 21 , 2004 (PHALGUNA 2, 1925 )
IND . CL .
: 155 F 1
192131 INT . CL .
: C 08 L 53/00
TITLE
: A METHOD FOR PRODUCING RELATIVELY THIN SHEETS OF POLYMERIC SURFACING.
:
APPLICANT
PREMARK RWP HOLDINGS, INC . OF 300 , DELAWARE AVENUE , WILMINGTON, DELAWARE 19801 , U.S. A. AMERICAN COMPANY .
INVENTOR
1 ) RICHARD ROY HAUTALA.
2) PETER CHARLES GAA
:
INTERNATIONAL APPLICATION NO
: 123 BOM 1999 DATED 24.02.1999
INDIAN APPLICATION NO .
PRIORITY NO .
: -09/065,818 DATED 23.04.1998 OF AMERICA
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4, PATENTS RULES 2003 ) , PATENT OFFICE BRANCH , MUMBAI - 13 .
9 CLAIMS
A method of producing sheets of polymeric surfacing , comprising the steps of:
a) providing a resin matrix syrup ;
b) providing relatively solid polymeric particles ;
c) coating the particles with an adhesion promoter ;
d) combining the particles and the syrup into a mixture ;
e) forming the mixture into a solidified slab; and
f) cutting the slab into relatively thin sheets of surfacing .
Drawings - 10 - sheets Comp.specn .: 18 pages 551 PART III-SEC. 2]
THE GAZETTE OF INDIA, FEBRUARY 21 , 2004 (PHALGUNA 2, 1925)
192132 IND . CL .
: 48 A3
:
INT. CL .
H 01 L 23/58
TITLE
: A PROCESS FOR THE PREPARATION AND ORIENTATION GROWTH OF SINGLE SELF SEEDED CRYSTAL OF ANTIMONITE ALLOYS AND/OR ELEMENTAL BINARY OR TERMINARY SEMICONDUCTORS MATERIALS .
:
APPLICANT
DATTATRAY BHAIRU GADKARI
DEPARTMENT OF PHYSICS, MITHIBHAI COLLEGE , MUMBAI - 400 056 MAHARASHTRA , INDIA.
INVENTOR
1. DR. DATTATRAY BHAIRU GADKARI
2. DR. KUNJ BIHARI LAL.
3. DR. BRIJ MOHAN ARORA .
:
INTERNATIONAL
APPLICATION NO
INDIAN
:
DATED 26.02 . 1999
139 БОМ 1999
APPLICATION NO .
PRIORITY NO . :
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4, PATENTS RULES 2003 ) , PATENT OFFICE BRANCH , MUMBAI - 13 .
10 CLAIMS
A process for the preparation and orientation growth of a single self seeded crystal of antimonite alloys and/or elemental, binary or ternary semiconductor materials where in
i. Ahollow quartz tube closed with Wilson seals at both ends with arrangements for water circulation externally, flow of air or inert gas within, and a central axial shaft passing, up through the said Wilson seal at the top and provision for attaching and detaching at its end inside said quartz tube a cylindrical quartz ampoule having conical base with no support from downwards and a pressure tight seal able projection at the top ,
ii. Means for externally heating and controlling radial and axial temperature gradient inside the said quartz tube with on - line temperature display;
Provision of means at the top of the shaft projecting outside said quartz tube; for controlled programmable spinning clock wise and/ or anticlockwise and axial movement of said ampoule along with said central axial shaft and the process comprising
a) setting said quartz due to the temperature profile which is in concurrence with the sequential time temperature steps including some prolonged
11 552
[PART III-SEC. 2 THE GAZETTE OF INDIA, FEBRUARY 21 , 2004 (PHALGUNA 2, 1925)
a) isothermal steps - program (cyclogram) developed for slow cooling from at least 50 ° C above the melting point, to the roomtemperature , spread over from 50 hours to 150 hours, for the preparation and orientation. growth of a single self seeded crystal of the desired antimonite alloy/ semiconductor material ;
b) charging the ampoule with the souree materials for the said desired antimonite alloy/semiconductor material , flushing away the air in the ampoule with an inert gas and sealing the top with the inert gas pressure 300-500 torr and positioning it at the maximum temperature point inside said temperature profiled hot zone inside said quartz tube by attaching it to said central shaft and putting on the spin and the axial movements to pass the said charged ampoule to go through the positive gradient of the quartz tube and currently through melt- istep cycle as per said cyclogram for said antimonite alloy/semiconductor material ;
c) putting off heating , spinning and axial movement of the ampoule , at the end of the cyclogram and after the apparatus comes to be room temperature taking off the ampoule, breaking the top seal and inverting the open ampoule to collect the well grown single crystal.
1
Drawings -5- sheets Comp.specn .: 20 pages 553 THE GAZETTE OF INDIA, FEBRUARY 21 , 2004 (PHALGUNA 2, 1925)
PART III-SEC . 2]
192133 : 99 F
IND . CL .
B 65 D - 88 /12
:
INT . CL .
TITLE
: METHOD OF MANUFACTURING LINER INLET FOR PACKING IN BULK MATERIALS IN POWDER GRANULE OR FLAKE FORM FOR THEIR TRANSPORTATION.
APPLICANT
: KAILASH NATH MISRA , OF 102 , KUNJ SOCIEITY, ALKAPURI , BARODA- 390 009 , GUJARAT, INDIA.AN INDIAN NATIONAL
---- DATED---
& INVENTORS INTERNATIONAL APPLICATION NO
:
327 / BOM/ 1999 FILED ON 29.04.1999
INDIAN APPLICATION NO .
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4 , PATENTS RULES 2003 ) , PATENT OFFICE BRANCH , MUMBAI - 13 .
02 CLAIMS
Amethod of manufacturing Liner inlet for use in packing of powder , granules or flake materials for handling or transportation comprising steps ofjoining fabrics or films or sheets by means of conventional stitching , adhesion or thermal bonding for forming the Liner inlet of the size , shape and dimensions matching the inner size , shape and the dimensions of the transporting unit, providing on its one or more sides with reinforcing means to give it strength and to prevent the bulging of its sides when the material to be transported is filled in it, fixing conventional hanging or tying means such as tapes, straps , ropes or cords on two or more sides of the Liner inlet for placing it in position inside the said transporting unit, fixing the other ends of the hanging or tying means to the body of the transporting unit and providing an inlet on the front or top side of the Liner inlet for filling in the material to be transported and an outlet near the bottom side ofthe Liner inlet for discharging the material from the Liner inlet.
Drawings : 1 sheet
Comp.specn. 12 pages
9467 GI/2003 554
[PART II-SEC. 2 THE GAZETTE OF INDIA, FEBRUARY 21 , 2004 (PHALGUNA 2, 1925)
IND . CL .
: 154 D
192134 INT . CL .
: В 29 C - 33 / 56, В 30 B- 15/02 , C 11 D - 13/18
TITLE
: A STAMPING DIE
APPLICANT
: HINDUSTAN LEVER LIMITED , HINDUSTAN LEVER HOUSE, 165/166 BACKBAY RECLAMATION , MUMBAI 400 020, MAHARASHTRA , INDIA. AN INDIAN COMPANY INVENTORS
:
1) BRIAN EDMONDSON
2) ALAN WILLIAM ESPIE ,
INDIAN
:
384 BOM 1999 DATED 21.05.1999
APPLICATION NO .
PRIORITY NO .
: 9811634.6 DATED 29.05.1998 OF U.K.
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4, PATENTS RULES 2003 ) , PATENT OFFICE BRANCH, MUMBAI 13.
13 CLAIMS
A stamping die having a substrate stamping surface comprising a base matrix of open structure having a coating of elastomeric material applied thereon wherein the surface of the matrix if viewed in cross section includes a multiplicity of depressions , peaks and plateaus and the stamping surface comprises a composite surface which is predominantly elastomer having the matrix protruding through the elastomer.
Comp.specn .: 18 pages
Drawings: 01 sheet 555 PART III-SEC. 2 ]
THE GAZETTE OF INDIA, FEBRUARY 21 , 2004 ( PHALGUNA 2, 1925 )
192135 / :
IND. GL ...
134C
:
INT . CL.
TITLE
: A CRANKCASE ASSEMBLY FOR USE IN TWO WHEELED VEHICLE .
APPLICANT
: BAJAJ AUTO LTD .. AKURDI , PUNE 411 035 , MAHARASITTRA , INDIA . AN INDIAN COMPANY .
INVENTOR
: SHRIKANT RAGHUNATII MARATHE .
INTERNATIONAL APPLICATION NO :
INDIAN
:
403 BOM 1999 DATED 28.05.1999
APPLICATION NO: Complete after provisional specification filed on 08.05.2000
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES 2003 ) , PATENT OFFICE BRANCH , MUMBAI - 13 .
04 CLAIMS
A crankcase assembly for use in 2 wheeled vehicle comprising a crankcase ( 1 ) and a crankcase cover (2) joined along the longitudinal face (4) of said crankcase and crankcase cover with the help of fasteners (3 ) wherein transmission shalts rotate perpendicular to said joining face (4) of crankcase and crankcase cover thereby having a large machining area vulnerable to leakage of oil wherein improvement comprises in crankcase and crankcase cover designing to from a box section as herein described to reduce the joining surface area which required to be machined for preventing the leakage of oil and adapting a box section having an opering face ( 9 ) ton to which a separate housing ( 10) is provided .
Drawing: 4.sheets
Prov.specn .: 6 pages
Drawings : NIIN
Comp.specn. 10pages
FIGI 556
[PART III-SEC . 2 THE GAZETTE OF INDIA , FEBRUARY 21 , 2004 (PHALGUNA 2, 1925)
IND . CL .
: 55 E 2
192136 INT . CL..
: A 61 K 7/00 , 7/021
TITLE
: A ONE STATE IRRADIATION PROCESS FOR MANUFACTURE OF HYDROGEL DRESSING FREE OF SYNTHETIC PLASTICIZERS
APPLICANT
:
DEPARTMENT OF ATOMIC ENERGY,
GOVERNMENT OF INDIA
ANUSHAKTI BHAVAN , CHHATRAPATI SHIVAJI MAHARAJA MARG, MUMBAI - 400 038, MAHARASHTRA, INDIA .
INVENTOR
1 ) VARSHNEY DR. LALIT
2) MAJUMDAR DR. ADVAIT AJIT KUMAR
:
INTERNATIONAL APPLICATION NO
INDIAN
: 731 BOM 1999 DATED 27.10.1999
APPLICATION NO .
PRIORITY NO . :
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4, PATENTS RULES 2003 ) , PATENT OFFICE BRANCH , MUMBAI - 13 .
9 CLAIMS
A one stage irradiation process for manufacturing of hydrogel dressing free of synthetic plasticizers for treatment of bum and other skin injuries, comprising:.
i) preparing an aqueous solution of polyvinyl alcohol having an acetate content of up to 18% by wt . and in amount of 5-15% by wt . agar- agar and one or more natural polymers and or more natural polymers and/or their derivatives in amount of 0.5-5% bywt . chosen from agar- agar , gelatin , carageenan , sodium aliginate , carboxy methyl cellulose, guar gum , gum acecia , chitosan and other similar natural viscosity
ii) modifiers and radical scavengers. Putting the solution at 70-80 ° C in disposable plastic containers and sealing them .
Subjecting the said aqueous solution in the sealed containers obtained at the end of step ( ii ) to irradiation at room temperature to form the sterile ready to use hydrogel dressing.
Comp.specn .: 23 pages
Drawings - NIL - sheets 557 PART III-SEC . 2]
THE GAZETTE OF INDIA, FEBRUARY 21 , 2004 (PHALGUNA 2, 1925)
192137 54 XIV
IND . CL .
:
A 23L - 128
INT . CL .
: FLAVOURING MATERIALS FROM YEAST EXTRACTS .
TITLE
APPLICANT
: ZENECA LIMITED , A BRITISH COMPANY . 15 STANHOPE GA LONDON , WIY 6LN . ENGLAND .
:
INVENTORS
( 1 ) RODGER GRAHAM WOOD
(2) CORDELL GEOFFREY BRYAN
(3) MOTTRAM DONALD STEWART
PCT/GB 98/03716 DATED 11.12.1998
:
INTERNATIONAL APPLICATION NO
:
IN /PCT/2000/00051 /MUM DATE4D 1.6.2000
INDIAN APPLICATION NO .
9726452.7 DATED 16.12.1997 OF U.K.
PRIORITY NO .
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4, PATENTS RULES 2003 ) , PATENT OFFICE BRANCH , MUMBAI - 13.
11. CLAIMS
Aprocess of producing a flavouring material for food which comprises the step of subjecting a flamentous fungus in the presence of water to a temperature sufficient to reduce its nucleic acid content thereby producing an aqueous solution and concentrating the aqueous solution.
Drawings: Nil
i
Comp.specn .: 38 pages 558
[PART III-SBC. 2 THE GAZETTE OF INDIA, FEBRUARY 21 , 2004 (PHALGUNA 2, 1925)
IND. CL .
: 64B3
192138 INT . CL .
: Η 01 H - 85/32 2
TITLE
: A FUSE HOLDER DEVICE
/ : KLAUS BRUCHMANN, AM OLBERG 7A, D - 96450 COBURG , GERMANY.
APPLICANT & INVENTORS
PCT/EP 99/00052 DATED: 07.01.1999 /
INTERNATIONAL APPLICATION NO :
INDIAN
: IN/ PCT/ 2000/00171 / MUM DATED 10.07.2000
APPLICATION NO .
1 PRIORITY NO .
: 19800779.5 DATED 12 : 01: 1998 OF GERMANY
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4 PATENTS RULES 2003 ) , PATENT OFFICE BRANCH, MUMBAI - 13.
10 CLAIMS
A fuse holder device ( 10 ; 30) comprising a housing composed of insulating plastic; and
a fuse status indicator with a board (25) and a glow lamp (26);
a fuse link (20) having a head contact: (22) and a foot contact (23 ) înserted into the.... fuse holder ( 10; 30 ) ; the board (25) of the fuse status indicator is electrically connected by at least one connecting line ( 16,17 ; 36,37 ) to the head contact (22 ) and foot contact (23 ) of the fuse link (20);
characterized that
30
26 the housing of the fuse holder ( 10; 30) is produced from the insulating plastic by injection molding, and has at least one channel for the connecting line ( 16,17; 36,37) between the board (25 ) of the fuse status indicator and the head contact (22 ) and/or the foot contact (23 ) of the fuse link; and the connecting line ( 16,17 ; 36,37) is at least partially composed of conductive plastic, which is sprayed into the channel . 31 32
-25
عد
38-
38
37-
22 Comp.specn.: 12 pages Drawings: 2 sheets
35
34-
20
-36
24 530559 PART III-SBC. 2]
THE GAZETTE OF INDIA, FEBRUARY 21 , 200W (PHALGUNA 2, 1925)
192192139 FIND . CL .
: 32 F1
INT.CL.
: A61 B 17/00
TITLE
: AN IMPROVED PROCESS FOR MANUFACTURE OF 4- BROMO-2- ΟΧΥΙΜΙΝO- 3 - OXO -BUTANOIC ACID AND ITS DERIVATIVES .
LUPIN LTD. ,
AAPPLICANT M & INVENTORS
159, CST ROAD,
KALINA, SANTACRUZ ( E ),
MUMBAI -400 098 .
STATE OF MAHARASHTRA ,
INDIA , AN INDIAN COMPANY .
1 KANSAL VINOD KUMAR
2. RANE DNYANDEO RAGHO
13. DESHMUKH SANJAY
4. SINGH SANTOSH KUMAR
5.RICHARIA SANTOSH
6. ABRAHAM SUSAN AJAY.
INTERNATIONAL AAPPLICATION NO
1124 MUM 2001
INDIAN APPLICATION NO .
DATED 26/11/2001 .
PRIORITY NO .
:
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4, PATENTS RULES থার 32003 ), PATENT OFFICE BRANCH, MUMBAI - 13.
08 GLAEMS
1. A process for producing 4 - bromo- 2 -oxyimino 3 - oxo butanoic acid, predominantly as the (Z)-isomer of formula ( 1 ) ,
O = Br- CH2- C - C - C - он (I) N OR
wherein R is hydrogen ; a linear or branched C1-4 alkył group ; a linear or branchedC₁. 4 alkyl group substituted by a carboxylic acid or an aryl group; a substituted or unsubstituted cyclic alkyl group of 3-6 carbon aloms or a substituted or unsubstituted aryl group which comprising bromination of a 2- ( oxyimino) -3 - oxo butanoic acid derivative of formula ( 11 )
(II)
0 CH3- C- C- C- OR = N OR
whercin R is as defined above and R' is a tert - butyl group with bromine in the presence of an organic solvent and in the presence of a C14 alcohol and acetyl bronfide at a temperature ranging from about - 15 ° C to about + 15 ° C
Complete specification: 13 pages
Drawings Nil sheet .
560
[PART III-SBC. 2 THE GAZETTE OF INDIA, FEBRUARY 21 , 2004 (PHALGUNA 2, 1925) IND . CL .
192140
: 55 E4
INT . CL .
: C 07 D - 277/ 48 , A 61 K - 31/425
TITLE
: A PROCESS FOR THE PREPARATION OF A COMBINATION OF FAMOTIDINE POLYMORPHS A AND B.
:
APPLICANT
TONIRA PHARMA LIMITED , 301 ,YOGI COMPLEX, 44 , SAMPATRAO COLONY , ALKAPURI , VADODARA 390 005 ; GUJARAT , INDIA . AN INDIAN COMPANY.
INVENTORS
: ( 1 ) MANDAYAM CHAKRAVARTHY SRIRAMAN
(2) VYAS JIGNESH HARIKESH
(3 ) SANYAL JANARDHAN PRASAD
(4) SHAH MAHESH NATWARLAL
:
------- DATED-- .
INTERNATIONAL APPLICATION NO
INDIAN
:
1156/ MUM/2001 DATED 6.12.2001
APPLICATION NO .
APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4 , PATENTS RULES 1972 ) , PATENT OFFICE BRANCH , MUMBAI - 13 .
05 CLAIMS
Aprocess for the preparation of a combination of Famotidine { Chemical Name (N- Sulfamyl- 3-(2- guanidinothiazole - 4- yl - methylthio) proionamidine ) Polymorphs A andB comprising the following steps: -
a) dissolving Famotidine crude in a ratio of 1 : 5 to 1:70 in solvent/ methanol under heating at temperature of 75 ° C and stirring to form a solution and treating with activated carbon ;
b) filtering the solution of step (a) to obtain a clear colourless solution;
c) cooling the said solution of step (b) with ice and salt mixture under agitation to a temperature of 15 to 25° C;
d) seeding the said cooled solution of step (c) with a mixture of Famotidine Polymorph A and Famotidine Polymorph B in a ratio of 20:80 to 50:50 for crystallization;
e) filtering out the crystals of Famotidine Polymorphs A and B combination;
f) drying the said crystals of Famotidine Polymorphs A and B combination in an oven at a temperature of 50 to 60 ° С.
Drawings : 5 sheets Comp.specn . 7 pages 561 THE GAZETTE OF INDIA, FEBRUARY 21 , 2004 (PHALGUNA 2, 1925 )
PART III- SEC . 2 ]
OPPOSITION PROCEEDING (U/S . 25)
An opposition has been entered by M/s. Subramaniam , Natraj & Associates , new Delhi on behalf of M/ s. Lohia Starlinger Limited, Kanpur, (U.P. ) to the grant of a Patent on application No. 190278(1182/Del/95) dated 26.06.1995 made by M/s . Starlinger-Humer, Franz Xaver, Austria.
An opposition has been entered by M/ s . L. S. Davar & Co. , Kolkata on behalf of M/ s . Bajaj Auto Limited, Pune, Maharashtra to the grant of a Patent on application No. 190332 (722/Del/ 94) dated 07.06.1994 made by M/s. Piaggio Veicoli Europei S.P.A. , Italy.
An opposition has been entered by M/ s. S. Majumdar & Co. , Kolkata on behalf of M/s . Hindustan Lever Limited, Mumbai , Maharashtra to the grant of a Patent on application No. 190337 ( 1038/Del/ 94 ) dated 12.08.1994 made by M/s . Procter & Gamble Company, U.S.A.
An opposition has been entered by M/ s . L. S. Davar & Co. , Kolkata on behalf of M/ s . Bajaj Auto Limited, Pune, Maharashtra to the grant of a Patent on application No. 190355 ( 1609/Del/ 94) dated 14.12.1994 made by M/s . Honda Giken Kogyo Kabushiki Kaisha, Japan .
An opposition has been entered by M/s .L. S. Davar & Co. , Kolkata on behalf of M/ s . Bajaj Auto Limited, Pune, Maharashtra to the grant of a Patent on application No. 190378 (906/Del /95) dated 19.05.1995 made by M/ s . Nippon Thermostart Co. Ltd. , Japan.
An opposition has been entered by M/ s . L. S. Davar & Co. , Kolkata on behalf of M/s . Bajaj Auto Limited, Punc , Maharashtra to the grant of a Patent on application No. 190589 ( 1641 /Del/94) dated 19.12.1994 made by M/s . Honda Giken Kogyo Kabushiki Kaisha, Japan.
An opposition has been entered by M/s . L. S. Davar & Co. , Kolkata on behalf of M/ s. Bajaj Auto Limited, Pune, Maharashtra to the grant of a Patent on application No. 190630( 816/Del/95 ) dated 03.05.1995 made by M/s . Honda Giken Kogyo Kabushiki Kaisha, Japan.
RESTORATION UNDER SECTION 60 OF THE PATENTS ACT, 1970
Notice is hereby given that an application for restoration of Patent No. 187046 made by Ormet Corporation on 03.02.2003 has been allowed and the said Patent is restored.
CANCELLATION PROCEEDINGS
UNDER SECTION 19 ( 1 )
"An application in the name of M/s. Amit Plastic for Cancellation of Registered Design No. 171885 was filed on 16.10.96 in class 10 in the name of M/ s . M. A. Rubber Industries ."
"An application in the name of M/s. Cookwell Domestic Appliances for Cancellation of Registered Design No. 174225 was filed on 8.8.02 in class 03 in the name of Canon Domestic Appliances . "
"An application in the name of Moldtek Technologies Limited for Cancellation of Registered Design No. 189183 was filed on 30.4.03 in class 09-02 in the name BALMER LAWRIE- VAN LEER LIMITED . "
THE DESIGNS ACT, 2000
SECTION 30
DESIGN ASSIGNMENT
The following Design stand in the name of Brooke Bond Lipton India Limited registered under the Designs Act , 1911 has been changed in the Register of Design in the name of Hindustan Lever Limited.
Name
Class
Design No.
Hindustan Lever Limted, a Company
03 04 & 12
incorporated under the Indian Companies Act , 1913 , having its registered office at Hindustan Lever House, 165/166 Backbay Reclamation, Mumbai -400 02
169274, 169275 , 169636 169637, 169667 to 169670, 169876, 169968 , 170333 & 171333
10-467 GI/2003 562
THE GAZETTE OF INDIA, FEBRUARY 21 , 2004 (PHALGUNA 2, 1925)
[PART III-SEC . 2 The The following Design stand in the name of Amway Corporation , registered under the Designs Act , 1911 has been changed in the Register of Design in the name of Access Business Group International LLC( ABGIL) .
Design No.
Class Name
175810 & 178615
03
Access Business Group International LLC (ABGIL) of 7575 Fulton Street East , Ada, Michigan 49355 , USA , a Michigan Limited liability company
The following Design stand in the name of Spring AG Metallwarenfabrilk Eschikon registered under the Designs Act, 1911 has been changed in the Register of Design in the name of All - Clad Switzerland GmbH..
Class
Design No.
Name
179662 & 179663
01
All-Clad Switzerland GmbH of Hornlistresse 14, 8360 Eschlikon Switzerland , a corporation organized and existing under the laws of Switzerland
Cessation of Patents
182239
CHENNAI 01.08.2003 ΤΟ 30.09.2003
RENEWAL FEES PAID
131983
187658 181984 182021 184386 182021 184386 184705 184546 178034 178097 184985 180850 181024
181576 181026 174893 184799 182421 181974 180763 178032 178033 184797 180292 187813 182280 172127 174288 179487 188421 1800029 173318
187660 184719 188403 181039 182841 180293 181938 183212 181860 182580 183785 184260 185333
184990 173374 184716 184798 184258 184715 172692 182187 181061 182087 182426 182683 183256 184126 184127 184346 184347 184389 184474 184935 184937
184936 184938 184473 183723 182708 182741 182845 174968 174970 183342 184011 187678 178086 182690 181365 182978 179451 182221 187726 183693 184718 186867 175162 181063 181064 181042 181041 174377 181110 181037 180216 179299 184129
184708 174742
185032 175412 181048 182091 184939 188402 188404 188405 188406 188512 188514 188552 188555 188556 188557 188559
188597
188560
185040 188423 188422 188424 188425 188426 188428 188474 188476 188515 188517 188518 188520 188599 188429 188430 188473 188600 188591 188598 182682 181195 181988 184387 183960 185034 185035 187728 187747 177302 185336 185839 185437 185335 184178 181065 185337 180413 177757 185320 185216 178636 180218 181083 178748 178089 184674 186754 184675 174375 182685 184794 174981 186852 188408 187572 182974 180148 180762 187675 181221 180112 181089 172830 179153 174740 183744 183699 187241 187619 188632 188634 188635 188639
188637 185338 181090 181579
184475 181069 181070 182096 183698 175163 181088 187720 185442 187691 181071 185218 184013 179003 186853 183955 187698 187815 186461
184146
181074
182804 181969 181079 187699 182744 187819 181033 182742 182577 180145 181852 187565 187567 187561 187096 179045
184012
174743
186750 178492 180115 180116
172955
182848
183213 175065 182090 181082 187570 183846 180117 180416 182802 187673 184348
NOTIFICATION
PATENTS SEALED ON 23-01-2004/KOLKATA
190219 190407 190443 190444 190450 190507 190508 190509 190510 190513 190526 190528 190530 190532
KOL- 14
PATENT SEALED ON 18.12.2003 (DELHI)
188713 189273 189288 189291 189323 189329 189341 189342 189346 189348
PATENT SEALED ON 15.01.2004 (DELHI )
188678 189172 189173 89175 189177 189179 189191 189196 189197 189199 189200 189103 189205 189274 189277 563 THE GAZETTE OF INDIA, FEBRUARY 21 , 2004 (PHALGUNA 2, 1925)
PART III-SBC. 2]
REGISTRATION OF DESIGNS
The following designs have been registered. They are open for public inspection from the date of registration. (Colour combination if any, is not shown in the representation)
The dates shown in the following each entry is the date of registration.
19-02
Class.
No. 193450. INTER GOLD GEMS PVT . LTD. , OF 58/60, JARIWALA MANSION, N.S. PATKAR MARG, HUGHES ROAD, MUMBAI : -400 007, MAHARASHTRA, INDIA. "COIN", 8 OCTOBER 2003.
Class. 19-02 No.193448. INTER GOLD GEMS PVT . LTD. , OF 58/60, JARIWALA MANSION, N.S. PATKAR MARG, HUGHES ROAD, MUMBAI :-400 007, MAHARASHTRA, INDIA. "COIN", OCTOBER 2003. 8
19-02
Class.
No.193447 . INTER GOLD GEMS PVT. LTD . , OF 58/60, JARIWALA MANSION , N.S. PATKAR MARG, HUGHES ROAD, MUMBAI: -400 007, MAHARASHTRA, •INDIA. "COIN", OCTOBER 2003. 8
19-02
Class.
No.193443 . INTER GOLD GEMS PVT . LTD . , OF 58/60, JARIWALA MANSION, N.S. PATKAR MARG, HUGHES ROAD , MUMBAI : -400 007, MAHARASHTRA, INDIA. "COIN", 8 OCTOBER 2003.
11-467GI/2003 564
[PART III-SBC. 2 THE GAZETTE OF INDIA, FEBRUARY 21 , 2004 (PHALGUNA 2, 1925 )
Class. 19-02 No.193446 . INTER GOLD GEMS PVT. LTD . , OF 58/60, JARIWALA MANSION, N.S. PATKAR MARG , HUGHES ROAD , MUMBAI : -400 007, MAHARASHTRA , INDIA. " COIN" , 8 OCTOBER 2003.
Class. 06-04 No.193478 . SUGATSUNE KOGYO CO. LTD. OF 8- 11 , HIGASHIKANDA , 1 - CHOME, CHIYODAKU, TOKYO , JAPAN. " UMBRELLA STAND" , 15 APRIL 2003 [ PRIORITY JAPAN] .
Class . 23-01 No. 193925. VELMOR HOME DÉCOR PVT . LTD. , OF DAYASAGAR INDUSTRIAL ESTATE, GODDEV ROAD, BHAYANDER (EAST), THANE- 401 105, MAHARASHTRA, INDIA. " HAND SHOWER " , 27 NOVEMBER 2003 .
Class . 23-01 No.193916 . VELMOR HOME DÉCOR PVT . LTD. , OF DAYASAGAR INDUSTRIAL ESTATE , GODDEV ROAD, BHAYANDER (EAST), THANE -401 105, MAHARASHTRA, INDIA. " 2 WAY BATH SPOUT" , 27 NOVEMBER 2003 .
Class . 19-06 No.193531 . SACHIN VIJAY SACHDEV OF 6/22 , MAROL CO- OPERATIVE INDUSTRIAL ESTATE , M.V. ROAD, ANDHERI ( E) , MUMBAI: -400 059, MAHARASHTRA, INDIA. " PRINTER PLASTIC" , 16 OCTOBER 2003 .
565 PART III-SEC.2]
THE GAZETTE OF INDIA, FEBRUARY 21 , 2004 (PHALGUNA 2, 1925)
19-06
Class.
No.193797. ADD PENS LIMITED OF BUSINESS PARK, 6TH FLOOR, CHINCHOLI NAKA, S.V. ROAD,MALAD MAHARASHTRA, (W MUMBAI:-400 INDIA.. INSTRUMENT " , 12 NOVEMBER 2003. 064 "WRITING
Class. 08-07 No.193019. SUGATSUNE KOGYO CO. LTD . OF & 11, HIGASHIKANDA, 1 -CHOME , CHIYODAKU, TOKYO, JAPAN. " LOCK FOR UMBRELLA STAND" , 13 MARCH 2003 [PRIORITY JAPAN ] .
06-04
Class.
No.192790. MARUTI PLAST OF UNIT NO.3-4, KANCHAN INDUSTRIAL ESTATE, BUILDING NO.1 , SOMNATH ROAD, DHABEL, NANIDAMAN, DAMAN-396210, UNITON TERRITORIES, INDIA. "RACK", 7 AUGUST 2003 .
09-09
Class.
No.193668. BOROPLAST LIMITED, OF 49-A, CHAKALA ROAD, OPF: P & G PLAZA, ANDHERI (E), MUMBAI : -400 093, MAHARASHTRA, INDIA. "BIN", 11 NOVEMBER 2003.
09-09
Class.
No.193669 . BOROPLAST LIMITED, OF 49-A CHAKALA ROAD , OPP: P & G PLAZA, ANDHERI (E), MUMBAI : -400 093, MAHARASHTRA, INDIA. "BIN", 11 NOVEMBER 2003.
566
THE GAZETTE OF INDIA , FEBRUARY 21 , 2004 (PHALGUNA 2, 1925 ) [PART III-SEC. 2 Class . 09-09 No.193670. BOROPLAST LIMITED , OF 49-A, CHAKALA ROAD , OPP : P & G PLAZA, ANDHERI (E) , MUMBAI : -400 093, MAHARASHTRA, INDIA. "BIN" , 11 NOVEMBER 2003.
Class. 13-03 No.192784. HARLEELA PLAST PVT . LTD. , PLOT NO.C/10/3 , ADDL. M.L.D.C. , JALNA-431203, MAHARASHTRA, INDIA. " ELECTRICAL WIRE GUARDS " , 7 AUGUST 2003.
23-01
Class.
No.193920. VELMOR HOME DÉCOR PVT . LTD. , OF DAYASAGAR INDUSTRIAL ESTATE, GODDEV ROAD, BHAYANDER (EAST), THANE -401 105, MAHARASHTRA, INDIA. " PLAIN SPOUT", 27 NOVEMBER 2003 .
23-01
Class.
No.193921 . VELMOR HOME DÉCOR PVT. LTD., OF DAYASAGAR INDUSTRIAL ESTATE, GODDEV ROAD, BHAYANDER (EAST), THANE-401 105 , MAHARASHTRA, INDIA. " 1 WAY TOILET TAP" , 27 NOVEMBER 2003 .
23-01
Class.
No.193922 . VELMOR HOME DÉCOR PVT . LTD. , OF DAYASAGAR INDUSTRIAL ESTATE, GODDEV ROAD, BHAYANDER (EAST), THANE - 401 105, MAHARASHTRA , INDIA. " SINGLE LEVER BASIN MIXER" , 27 NOVEMBER 2003.
567 PART III-SEC. 2] THE GAZETTE OF INDIA, FEBRUARY 21 , 2004 (PHALGUNA 2, 1925)
23-01
Class.
No.193923. VELMOR HOME DECOR PVT . LTD. , OF DAYASAGAR INDUSTRIAL ESTATE, GODDEV ROAD, BHAYANDER (EAST), THANE-401 105, MAHARASHTRA, INDIA. "2 WAY DIVERTÓR SPOUT", 27 NOVEMBER 2003.
23-6
Class.
No. 193934, VELMOR HOME DECOR PVT . LTD. , OF DAYASAGAR INDUSTRIAL ESTATE , GODDEV ROAD, BHAYANDER (EAST), THANE-401 105, MAHARASHTRA, INDIA. "SINGLE LEVER DIVERTOR " , 27 NOVEMBER 2003.
Class. 23-01 No.193931 . VELMOR HOME DECOR PVT. LTD., OF . DAYASAGAR GODDEV ROAD , BHAYANDER (EAST), THANE-401 105, MAHARASHTRA, INDIA. "CENTRAL HOLE BASIN MIXER " , 27 NOVEMBER 2003 . INDUSTRIAL ESTATE,
Class. 23-01 No.193932. VELMOR HOME DÉCOR PVT . LTD. , OF DAYASAGAR INDUSTRIAL ESTATE, GODDEV ROAD, BHAYANDER (EAST), THANE-401 105, MAHARASHTRA, INDIA. "SINGLE LEVER DIVERTOR " , 27 NOVEMBER 2003.
Class. 23-01 No.193933. VELMOR HOME DECOR PVT. LTD., OF DAYASAGAR INDUSTRIAL ESTATE, GODDEV ROAD , BHAYANDER (EAST), THANE-401 105, MAHARASHTRA, INDIA. "OVER HEAD SHOWER " , 27 NOVEMBER 2003.
568
[PART III-SEC. 2 THE GAZETTE OF INDIA, FEBRUARY 21 , 2004 (PHALGUNA 2, 1925 )
23-01
Class.
No.193934. VELMOR HOME DÉCOR PVT . LTD., OF DAYASAGAR INDUSTRIAL ESTATE, GODDEV ROAD, BHAYANDER (EAST), THANE -401 105 , MAHARASHTRA, INDIA. " FOUR WAY DIV ERTOR" , 27 NOVEMBER 2003.
23-01
Class .
No.193936. VELMOR HOME DÉCOR PVT. LTD. , OF DAYASAGAR INDUSTRIAL ESTATE, GODDEV ROAD, BHAYANDER (EAST), THANE -401 105 , MAHARASHTRA, INDIA. " WALL MOUNTED BASIN FAUCET" , 27 NOVEMBER 2003.
Class . 23-02 No.193324. VELMOR HOME DÉCOR PVT . LTD., OF DAYASAGAR INDUSTRIAL ESTATE, GODDEV ROAD, BHAYANDER (EAST) THANE-401 105 , MAHARASHTRA, INDIA "HOLDER (TOOTH BRUSH) " , 27 NOVEMBER 2003 .
Class . 11-01 No.192450. OLLECH WOLF, LANGE HERENTALSESTRAAT 80, B- 2018, ANTWERPEN, BELGIUM. " PRECIOUS STONE" , 24 JUNE 2003.
12-11
Class.
No.191914. M/S . KAILASH INDUSTRIES, GANESH ESTATE, SERVE NO.210, PLOT NO.9/B , BEHIND S.K. ALUMINUM, VERAVAL ( SHAPAR), DIST.: RAJKOT 360 002 (GUJARAT - INDIA). " TWO WHEELER SIDE BOXES" , 22 APRIL 2003.
PART III-SEC . 2 ]
369 THE GAZETTE OF INDIA, FEBRUARY 21 , 2004 (PHALGUNA 2, 1925)
14-01
Class.
REAL IMAGE No.191661 . MEDIA TECHNOLOGIES PVT . LTD . , AT 7B, THIRD STREET, BALAJI NAGAR, CHENNAI:-600 014, T.N. , INDIA. " JUKEBOX" ,26 MARCH 2003.
TIMEX
Class. 15-01 No.191972 . THE GATES CORPORATION , 900 SOUTH BROADWAY, MS: 31-4-1- A3 , DENVER, COLORADO 80209, U.S.A. , "CRANKSHAFT DAMPER" , 11 DEC. 2002 ( PRIORITY U.S.A. ] .
15-01
Class.
No.191971 . THE GATES CORPORATION, 900 SOUTH BROADWAY, MS: 31-4-1 -A3, DENVER, COLORADO 80209 , U.S.A. , " CRANKSHAFT DAMPER" , 11 DEC . 2002 [ PRIORITY U.S.A. ) .
Class. 09-07 No.191772 . MAHAVIR PLASTIC , 302 , SURABHI, S.V.P. ROAD, OPPSITE CHAMUNDA CIRCLE BORIVALI (W) , MUMBAI" : -400 092, MAHARAS- HTRA. ( INDIA). " CAP FOR CONTAINER " , 2 APRIL 2003 .
Class. 07-07 No.191466 . DART INDUSTRIES INC . , OF 14901 , SOUTH ORANGE BLOSSOM TRAIL, ORLANDO, FLORIDA 32837, U.S.A. " RIM" , 13 SEPT. 2002 [ PRIORITY U.S.A. ] 570
[PART III-SEC. 2 THE GAZETTE OF INDIA , FEBRUARY 21 , 2004 (PHALGUNA 2, 1925 )
Class . 14-99 No.191969 . SONY KABUSHIKI KAISHA (ALSO TRADING AS SONY CORPORATION), OF 7-35 KITASHINAGAWA 6- CHOME, SHINAGAWA- KU, TOKYO , JAPAN. " CARTRIDGE FOR OPTICAL DISC" , 12 FEB . 2003 [ PRIORITY CHINA) .
Class . 31-00
1 No.191751 . M/S . NATIONAL APPLIANCES, HAVING HIS OFFICE AT SUMATI NIVAS, 1ST FLOOR, CARTER ROAD NO.5, BORIVALI(E), MUMBAI: -400 072, MAHARASHTRA, INDIA. "WATER FILTER " . 4 APRIL 2003 .
02-04
Class .
No.191920. BATA INDIA LIMITED, 6A S.N. BANERJEE ROAD , KOLKATA: -700 013 , W.B. , INDIA . " FOOTWEAR " , 22 APRIL 2003 .
Dr. S. N. MAITY
Controller General of Patents , Designs & Trade Marks प्रबन्धक , भारत सरकार मुद्रणालय , फरीदाबाद द्वारा मुद्रित एवं प्रकाशन नियंत्रक , दिल्ली द्वारा प्रकाशित , 2004
PRINTED BY THE MANAGER, GOVERNMENT OF INDIA PRESS , FARIDABAD AND PUBLISHED BY THE CONTROLLER OF PUBLICATIONS , DELHI , 2004