Subject NOT available

click here for IIIF manifest

The Gazette of India

EXTRAORDINARY

PART I—Section 1

PUBLISHED BY AUTHORITY

No. 12] NEW DELHI, WEDNESDAY, JANUARY 22, 1964/MAGHA 2, 1885

MINISTRY OF STEEL, MINES & HEAVY ENGINEERING

(Department of Iron & Steel)

PUBLIC NOTICE

New Delhi, the 21st January 1964

SUBJECT.—Clarification and application of Extras: —

(A) Extras for specific length (Miscellaneous)

(B) Sectional Extras.

"No AP/C/39(4)/63.—The specific length extras as well as some of the sectional extras in the "Schedule of Extras" notified in the Notification No. S.O. 1804-AP- 84/9N/ESS. COMM/Iron & Steel/15(l) dated 27th June 1963 published in Part II Section 3 (ii) of the Gazette of India, Extraordinary dated 1st July 1963, the Gov- ernment of India is pleased to notify the following clarification and application of some of its items on the above subject already notified and published on 1st July 1963.

(A) Extras for specific length (Miscellaneous)

1. (1) Specific length extra is applicable when supplies are required to be made in one length for the entire quantity (minimum 20/24 tonnes) Indented for when the lengths rise in multiples of 25 mm even if in some stages they coincide with the stock lengths.

(ii) Specific length extra should not, however, be applicable when the indentor agrees to accept supplies of any one stock length (minimum 20/24 tonnes) in the ratio of 85 per cent. Specific stock length and the balance 15 per cent. in assorted short lengths down to 3 Metres,

(iii) The specific length extra is not applicable when orders are for standard sizes and for their own convenience the producers offer non-standard sizes which are acceptable to the indentors.

(iv) The Controlled and Regd. Stockholders can not recover the extras notified for 'specific length' except for the quantity land to the extent such extras are actually paid by them in the course of acquisition of the steel materials,2. The specific length extras for Plates and Sheets are applicable over the base column I selling prices when supplies are made in non-standard lengths. These non-standard lengths are those lengths which have not been prescribed by ISI. However, at present the Main Producers are also producing in accordance with their own standard lengths. Till such time as they completely switch over to ISI ( 2 7)

(B) Sectional Extras.

In case of supply in inch gize the chargeable extra shall be the extra toed for the equivalent metric size. Where, however, the converted, metric size (from the Inch size) falls between two metric sizes for which extras have been published, the chargeable extras for such inch sections shall be the higher of two extras fixed for those two millimeter sections. This notification is issued in supersession of the notification No. S.O. 2612/ESS, COMM/Iron & Steel/15(2) and 27(1) AM 32 published in Part II Section 13 (ii) of the Gazette of India, dated 22n<3 October 1&60.

The above clarification should be deemed to have taken effect from 1st July 1963.

H. S. SAMUEL,

Price and Accounts Officer for Iron and Steel Controller."

[SC(C)-2(33)/61-II.l

M. C. MISRA, Dy. Secy.