REGISTERED No. D. 221
The Gazette of India
EXTRAORDINARY
PART II—Section 3—Sub-section (ii)
PUBLISHED BY AUTHORITY
No. 25] NEW DELHI, THURSDAY, FEBRUARY 3, 1966/MAGHA 14,1887
Separate paging is given to this Part in order that it may be filed as a separate compilation
MINISTRY OF COMMERCE
NOTIFICATION
New Delhi, the 3rd February 1966
S.O. 425.—Whereas the Central Government is of opinion that in exercise of the powers conferred by section 6 of the Export (Quality Control and Inspection) Act, 1963 (22 of 1963), cast iron manhole covers and frames should be subject to inspection prior to export;
And whereas the Central Government has formulated the proposals specified below for the said purpose and has forwarded the same to the Export Inspection Council, as required by sub-rule (2) of rule 11 of the Export (Quality Control and Inspection) Rules, 1964;
Now, therefore in pursuance of the said sub-rule, the Central Government publishes the said proposals for the information of the public likely to be affected thereby.
Notice la hereby given that any person desiring to forward any objection or suggestion with respect to the said proposals may forward the same, within thirty days of the date of publication of this notification, to the Export Inspection Council, World Trade Centre, 14/1-B, Ezra Street, 7th Floor, Calcutta-1.
Proposals
(1) To notify that cast iron manhole covers and frames shall be subject to inspection prior to export;
( 9 3)
„, THE GAZETTE OF INDIA EXTRAORDINARY JPAUT I I-(2) To specify the type of inspection in accordance with the draft Export of Cast Iron Manhole Covers and Frames (Inspection) Bules, 1966 set out in Annexure II to this notification as the type of Inspection which would be applied to such cast iron manhole covers and frames;
(3) To recognise the specifications as specified in Annexure I to this notifi- cation as the standard specifications for the cast iron manhole covers and frames;
(4) To prohibit the export, in the course of international trade, of any such cast iron manhole covers and frames, unless the same is accompanied by a certificate issued by an agency recognised by the Central Government under section 7 of the Export (Quality Control and Inspection) Act, 1963 (22 of 1963) to the effect that the cast iron manhole covers and frames are export-worthy.
2. Nothing in this notification shall apply to the export by land, sea or air of sainoles of cast iron manhole covers and frames to prospective buyers.
ANKEXURE I
Specification for Cast Iron Manhole Covers and Frames for use in drainage work
1. Manhole covers and frames shall be of the following grades and types:
(a) Heavy duty, denoted by the letters 'HD' solid type, for use under heavy
vehicular traffic conditions.
(b) Medium duty, denoted by the letters 'MD' solid type, for use under
light traffic conditions.
(c) Light duty, denoted by the letters 'LD', for use in domestic purposes or other places where they are not subjected to wheeled traffic loads.
2. The manhole covers and frames shall be of good quality grey cast iron, free from porosity, blow holes, cold shuts, distortion and other harmful defects.
3. Manhole covers and frames shall be cleanly cast, free from air and sand holes, cold shuts and warping which are likely to impair the quality. The covers shall have a raised chequered design on the top surface to provide an adequate non-slip grip, if not otherwise specified in the export contract.
4. Dimensions of Manhole covers and frames shall be as stipulated In the export contract. "Weights of covers and frames, size of clear opening together with the permissible tolerances for the different grades shall be as given below:
Grade Clear Weight Weight Permissible Tolerance
opening of Cover of Frame
.
On clear On weight
mm kg. kg. opening
HD 500 TI8 in "\ ±1% ±24%
MD . . .. 500 58 58 •
LD 455 23 15 .
NOTE: For rectangular covers, the clear opening dimension is for the smaller of the t wo dimensions.
5. Before coating, the manhole covers and frames shall be cleaned of all loose dust, dirt or sand t h at m ay be sticking to it. Manhole covers and frames shall be coated with a suitable material having t ar base or with a black bituminous composition, if not otherwise specified in the export contract. T he coating shall be smooth, tenacious arid good in appearance. It shall not flow when exposed to a temperature of 68° C.
SFC. 3 (ii)] THE GAZETTE OF INDIA EXTRAORDINARY 956. The manhole covers shall withstand without fracture, the loads specified in the Table below for a minimum period of 30 seconds, when subjected to the loading with a suitable loading test device simulating normal conditions of use. The loads are to be centrally applied without shock through the medium, of bearing blocks with a hard rubber facing or other resilient material. The bnock shall be sufficiently rigid to ensure that the load on the cover is equally distri- buted over the full area of the block. The diameter of bearing blocks to be used for different grades are also indicated in this table:
Grade
Load in tonnes Diameter of block
in mm.
'HD' . . . . " . .. 35 300
'MD' . .. . . .. 5 100
'LD' . . . . . .. 1 300
NOTE.—(1) The bearing strength prescribed is optional and shall be deemed to be compulsory only when the size of the cover is the same as stipulated in tfils specification and when the buyer wants to get the covers tested for this characteristic.
(2) In case the contract is negotiated for sizes other than that stipulated in this specification and the buyer wants the covers to be tested for this characteristic the respective bearing loads shall be as per contractual specification. The percent- age of sampling and criteria for conformity shall loe as per contract nut the minimum shall be as stipulated in clause 8 serial No. 6.
7. Each manhole cover and frame shall have cast on them the following:
(a) Mark 'E' meant for export.
(b) Grade, denoted by the abbreviations HD/MD/LD, of exports are made
on the basis of this specification.
(c) Manufacturer's name, trade mark and country of origin. The size
of letters at (a) and (b) shall not be less than 19 mm.
8. Sampling and Inspection of each consignment shall be done in accordance with the buyers' requirements, subject to a minimum of the scale prescribed in the table below. The consignment shall be considered to be In conformity with the requirements of the standard if the conditions pr" ribed In the table are satisfied-
THK TABLI
Permissible No. of the defective SI. Characteristics No.
Smaple No.
in the sample
1 0% 1 0%
t(i) Material
(2) Manufacture and workmanship .
1 0%
1 0%
(3) Coating, finishing and general appeainacc
15% 15%
(4) Dimensions . . . ..
15%
15%
3 0%
(5) Weights
5%
2 0%
(6) Strength
For each defective, additional four samples shall be tested. In case again one in defective the whoe lost shall be tested and the defectives rejected.
NoTE.^-For the purpose of calculating the number of samples for test, if the percentage comes to a fraction of a number, the next higher Integer would be taken.
qg THE GAZETTE OF INDIA EXTRAORDINARY [PART 1I-SEC. 3 (H)]ANNEXURE II
Draft Rules proposed to be issued under section 17 oj the Export (Quality Control
and Inspection) Act, 1963
1. Short title and commencement. (1) These rules may be called the Export of Cast Iron Manhole Covers and Frames (Inspection) Rules, 1866.
(2) They shall come into force on 15th March, 1966.
2. Basis of Inspection.—Inspection of Cast Iron Manhole Covers and Frames shall be carried out with a view to seeing that the cast iron manhole covers and frames conform to the specifications recognised by the Central Government under section 6 of the Export (Quality Control and Inspection) Act 1963 (22 c
3. Procedure of Inspection.—(1) An exporter intending to e)q?ort cast iron manhole covers and frames shall give intimation in writing of his intention so to do and submit along with such intimation a declaration of the specifications, stipulated In the export contract, to any one of the inspection agencies (hereinafter referred to as the Agency) recognised under section 7 of the Export (Quality Control and Inspection) Act 1£63 (22 of 1963), lo enable it to carry out the inspec- tion in accordance with rule 2.
(2) Every Intimation and declaration under sub-rule (1) shall be given not less than fifteen days before the expected date of shipment.
(3) On receipt of the intimation and declaration under sub-rule (2), the Agency shall inspect the consignment of cast iron manhole covers and frames with a view to seeing that the same conforms to the specifications recognised under section 6 of the Export (Quality Control and Inspection) Act. 1963 or as the CBSP may be any other stipulations stipulated in the Export Contract.
(4) If after inspection, the Agency is satisfied that the consignment of cast iron manhole covers and frames to be exported complies with the requirements of rule 2, it shall, within seven days of the receipt of intimation and declaration under sub-rule (2), issue a certificate to the exporter declaring the consignment as export-worthy.
4. Place of Inspection.—Inspection of cast iron manhole covers and frames for purposes of these rules shall be carried out either (a) at the premises of the manufacturer, or (b) at the premises at which the goods are offered by the exporter, provided adequate facilities for the purpose exist therein.
5. Inspection Fees.—A fee at the rate of one per cent of the invoice value of the consignment shall be paid as inspection fee under these rules.
6. Appeal.—(1) Any person aggrieved by the refusal of the Agency to issue a certificate under sub-rule (4) of rule 3, may, within then days of the receipt of the communication of such refusal by him, prefer an appeal to a panel of experts consisting of not less than three persona appointed for the purpose by the Central Government.
(2) The decision of the panel on such appeal shall be final.
[No. 60(125) Exp. Insp/65.]
A. C. BANERJEE, Jt. Secy.
PRINTED IN INDIA BY THE GENERAL MANAGER, GOVERNMENT OP INDIA PRESS, NEW DELHI AND PUBLISHED BY THE MANAGER OP PUBLICATIONS, DELHI, 1U6B