The Gazette of India
EXTRAORDINARY
PART II—Section 3—Sub-section (ii)
PUBLISHED BY AUTHORITY
No. 571] NEW DELHI, SATURDAY DECEMBER 16, 1967/AGRAHAYANA 25, 1889
Separate paging is given to this Part in order that it may be filed as a separate compilation.
MINISTRY OF COMMERCE
NOTIFICATION
New Delhi, the 16th December 1967
S.O. 4461.—Whereas the Central Government is of opinion that in exercise of the powers conferred by section 6 of the Export (Quality Control and Inspection) Act, 1963 (22 of 1963), it is necessary or expedient to amend the notification of the Government of India in the Ministry of Commerce No. S. O. 847 dated, the 13th March, 1967 in the manner specified below for the development of the export trade of India, and has forwarded the proposals in that behalf to the Export Inspection Council, as required by sub-rule (2) of rule 11 of the Export (Quality Control and Inspection) Rules, 1964;
Now, therefore, in pursuance of the said sub-rule, the Central Government hereby publishes the said proposals for the Information of the public likely to be affected thereby. 2. Notice is hereby given that any person desiring to forward any objection or sugges- tion with respect to the said proposals may forward the same within thirty days of the date of publication of this notification to the Export Inspection Council, "World Trade Centre", 14/1-B, Ezra Street (7th floor), Calcutta-1.
Proposals
The notification of the Government of India in the Ministry of Commerce No- S.O. 847 dated the 13th March 1967 shall be amended as follows, namely;—
In the said notification— (i) for paragraph 3, the following paragraph shall be substituted, namely:—
852 THE GAZETTE OF INDIA EXTRAORDINARY [PART II-.SEC. 3(U)]and binders impregnated with rubber/linseed base/bituminous compound, etc., with or without rubber cover, the whole being vulcanised/processed together in a uniform manner, used for the purpose of conveying materials or power transmission."
(ii) In Annexuro I, after serial No. 2 and the entries relating thereto, the following erial numbers and the entries shall be added, namely :—
"3. Solid woven impregnated cotton belting. 4. Solid woven impregnated hair belting."
(iii) In Annexure n, after serial No. B and the entries relating thereto, the following erial numbers and the entries shall be added, namely:
"C. Specification for soild-woven Impregnated cotton belting.
1- Construction.—-Tht belting shall be made from high grade cotton yarn, well and evenly, spun, and free from foreign matter or defects and shall be fully impregnated with linseed base or bitumen base impregnation.
2. Requirements.—The belting shall conform to the requirements specified below :—
2.1. Dimensions and Tolerances.—The dimensions of the belting shall be as specilled by the purchaser subject to the following tolerances:
2.1.1. Length.—The length of the belting shall be as agreed to between the buyer and seller.
2.1.2. Width.—The width of the belting shall be as agreed to between the buyer and seller with the following tolerances:
Width Tolerance
(a) Upto and including 125 mm. 1-6 mm. (b) Above 125 mm. 3-2 mm.
2.2. Tensile Test—The ultimate tensile stress of the belting shall be not less than 5-27 kg. 1 mm 2 of nominal cross section.
2.3. Elongation.—-The elongation of'belting shall be not less than 2 per cent ond not more than 6 per cent.
D. Specification.— for solid-woven impregnated hair belting.
1. Construction.—The belting shall be woven solid by interweaving hair warps, cotton wefts and binders and shall be fully impregnated with linseed base or bitumen base compound.
2. Requirements.—The belting shall conform to the requirements specified below:
2-1. Dimensions and Tolerances.—The dimensions of tho belting shall be as specified by the purchaser subject to tho following tolerances :
2.1.1. Length—The length of the belting shall be as agreed to between the buyer and seller.
2,1.2- Width.—The width of the belting shall bo as agreed to between the buyer arid seller with tho following tolerances:
Width Tolerance
(a) Upto and including 125 mm. 1-6 mm. (b) Above 125 mm. 3-2 mm. 2.2. Tensile Test.—The ultimate tensile stress of the belting shall be not Jess than 300 kg./cm*.
2.3. Elongation.—The elpngation of the belting shall be not less than 4 per cent and not more than 10 per cent"
[No. 60(28)Exp.Insp/67.]
A. C. BANERJEE, Jt. Secy.