REGISTERED NO. D. 221
The Gazette of India
EXTRAORDINARY
PART I—Section I
PUBLISHED BY AUTHORITY
No. 6] NEW DELHI, TUESDAY, JANUARY 9, 1968/PAUSA 19, 1889
Separate paging is given to this Part in order that it may be filed
as a separate compilation.
MINISTRY OF COMMERCE
PUBLIC NOTICE
IMPORT TRADE CONTROL
New Delhi, the 9th January 1968
SUB. :—Import Policy for Registered Exporters for the year April 1967—March 1968.
No. 5—ITC(PN)/68.—Attention is invited to the Import Policy for Registered Exporters contained in Part 'B' of Section III of the Import Trade Control Policy Book (Red Book) for the year April 1967-March 1968 issued under the Ministry of Commerce Public Notice No, 32 I TC(PN)/67 dated May, 1, 1967, as amended from time to time.
( 1 7)
Tg THE GA7ETTE OP INDIA EXT ftAORfil^ARY [PART I-Srr t]2. The following amendments may be made at the appropriate places as indicated below •—
: Amendments
: No ol Reference eRed look
Pag. th E
1
2
3
ENGINEERING GOODS.
190
S. No. 3
Col 4
The existing remark "The following items are allowed import against export of water coolers (Domestic)" may be sub- stituted by the following —
"The following items ae allowed import against export of water coolers (Domestic as well as Commercial)".
The following may be added after entry ()) :—
S. No 3
IQI
(k) Valves-Expansion, refrigeration nngle,-solenoid nnd Col. 4.
reversible,
(I) Component parts of hermetically sealed compresserb.
{m) Leaftheroid paper.
(n) Bypass Tee (Bundy) (0) Bundv tubing, (p) Magnetic Door Gasket Assembly (q) Valve plate gasket, cylinder head gasket, (r) Magnetic strips, Magnets. (s) High impact polystyrene powder. (0 Prime G.P. Sheets. (") Flapper valve steel strips. (v) Carbunzlng grade alloy steel. (oO Flare & sweat fittings. (x) Glassmetlc terminals. (y) Molecular sleeve heeds, (a) Melinex Film.
{ad) Al. tube welded with tube set both ends. (ab) Silfer, special solders & fluxes.
The following may be inserted •—
.. S. No. 14 (0
192
Col. 4.
(a) Semifinished master cylinder. (b) Semifinished wheel cylinder, (c) Brake hose.
The following may be inserted :—
1. S. No. 14 (u)
19:
(a) Components of taximeters,
Col. 4.
(ft) Core wire for speedometer cable.
The following may be inserted :—
1-193. S. No. 14 (ix)
T9;
(a) Head light glass.^
Col. 4.
(b) Electroplating Salts & brightners.
(c) Lacquer.
(d) Special Al. for vacuum coating.
(PAHI I-Src. I] THE GAZETTE OF INDIA EXTRAORDINARY
jyI 2 3 192.193.
The following nwy be inserted :—
S. No. 14 (xm) (a) to
(u) Duaflcx steel strips.
(A) Nickel, silicon (for alloying).
(t) Grinding paste. (c) (upto 10% of the face Cols,. 4 & 5. ,
VHIUC of the licence).
192-193
The following may be inseited :—
S.No. I4(xni)(d)
(a) Forging quality steel Billets.
Oil. 4.
The following may be inserted :—
S.No, TA (\ni)(f&
192-193.
g)
(a) Valve steel bars.
(i) Spring sleel wire.
Col. 4.
192-193.
The following may be inserted :—•
S.No. i4(xui;(h)
(a) Copper Zinc in Virgin form.
Col. 4.
(b) Fluxcs-nnlioxidants.
192-193.
The following may be inserted :—
S.No. T4(xiii)(j)
(a) Copper and brass tubes.
Col. 4.
The following may be inserted :—
192-193. S. No. 14 (xm) (k)
(a) Brass jels.
Col. 4.
) The following muy be inserted:—
192-193. S. No. 14 (xin) (m 10 0
(a) Filler paper.
Col. 4.
The following may be inserted :—
192-193. S.No. i4(xiii)(p)
(a) Copper.
Col. 4-
(b) Asbestos.
The following may be inserted :—
S. No. 14 (xiii) (r)
192-193.
(a) Forging qualities steel billets/sections.
Col. 4.
The following may be inserted :—
S. No. I4(xiv)(b)
192-193.
(a) Asbestos Millboard.
Col. 4.
The following may be inserted :—
S. No. 14 (tiv) (g)
192-194.
Co) Needle bearing.
Col. 4.
The following may be inserted :—
S. No. 14 Cxiv) (k)
193-194-
(a) Asbestos.
Col. 4.
(b) Binding resins.
20 THE GAZETTE OF INDIA EXTRAORDINARY LP A RT I-SEC. 1] I 2 3.'he following may be inserted :—
192-194. S. No. 14 (xv) (c) 'J
Col. 4.
(a) hRW tubes. (b) Heat TrcutiDg salts.
The following may be ln&ertcd :—
192-194. S. No. 14 (xv) (1)
Col. 4.
(a) King inn bush. (b) King pin bcarmg/ihiins.
The following may be inserted:—
192-194. S. No. r4 (xvi) (a& b)
[a) Contact points.
Col. 4. (
(b) Bendix drive,
(c) Slurtci pinninn,
(d) Coppei wire brass,
(e) Ball bearings (Permissible lype).
Q) Insulating niatcnal.
The following may be inserted ;—
S. No. 14 (xvij (c)
192-194.
Col. 4.
(a) Special electrode for Central wne. (6) Calcined alumina.
The following may be inserted :—
S. No. 14 (xvi) (1)
192-195.
Col. 4.
(a) Horn points. (b) bincka/Nichromc wire, (t) Diaphragms.
The following may be inserted :—
S. No. 14 (xvi)
192- i 95-
(0, p, r.s)
Col. 4.
(a) Contact points. (6) Bendix diive. (c) Starter Pmmon. (d)Copper wire biass. iV) Hall bearings (Permissible type). (j) Insulating malenal.
The following may be inserted ;—
S. No. 14 (xvii) (c)
192-195.
(a) Component oi'dash board instiumenis.
Col. 4.
I'hc following may bo inserted :—
y. No. M (xvn) (")
192-196.
(a) Wnes or mncd cables.
Col. 4.
The following may be inserted after (b) :—
S. No. 19 (k)
107-198.
Col!.. A & S.
4 5
(c) Tin ingot "1 upto 20% of the face value (d) Lead ingot. / of licence. (e) Bronze powder. upto 5% of the face value
of licence.
(/) B.P. Sheets.
/PART T~SFC. 1| 'IHE C V r HE OF INDIA EXTRAORDINARY 21I 2 3 206. S. No. 58(1) to (v)
Col. A.
The following may be lrscried :— (a) Condensers. (b) prejphan papei (c) Condenser paper (d) E C. Copper wire bars/wiie rods'wucs,
The following mav be inserted after (v) : —
S. No. 60
207.
Col 4.
(w) Cirdips. (x) Multi layer special insulating muleiial consisting of poly-
ester film and presphan.
(y) Copper allov commutator segments (z) Fibre backed or bare mica combination polvester film in-
sulating material,
(ad) Grease nipples. (ab) Oil Seals. (ac) CvHnderi and moulded angle rin,;s (Elephanlide or
pbenolic resin bonded).
(ad) Insulated craft or Manila paper. (ae) Gasket Materials in the form of sheets (af) Neo k-Tex 01 Nco-lcngilc moulded packing waslicis. (a%) Insulating Screws. (ah) Aerolite (at) Hardner GBMX. (aj) Pvrooler liquidor other synthetic insulating fluid. (ak) Cone rotors (al) Thermo couples. (am) E.C, Grade AT Woie B^rs or roJi. (an) Phosphor bronze rods. (ao) Evrcka/KanthnI resistance wires. (ap> Copper alloy tomrnutator segments. (aq) Bare electrolytic copper sttips. (ar) Electrolytic copper extruded shapes. (as) Bakelitt- bhutts. fat) Phosphor bron'/e slnps. (au) Vngm tin meiai.
S. No. 61
20S.
The loljowing mu\ be inserted after (w) • — (\) Multilevel special insulating material, tonsistinn of poly-
t'sler film & prcsphan.
Col. \
(\i Dipouhcrm slccvings—Rayon biaulcd fine synthetic ic-
sin varnished.
(s) Phenoeic paper laminate.
(zi) Varnished glass cloth and tape. (z2) Varmshed glass sleeving. (zj) Laminated fibre glass sheets. ("4) Cylinders and moulded angle rings (El^jhanlide or
phenoeic resin bonded). (*5) Kurcka/Kanthal resistance wire. (z6) Electrolytic copper extruded shapes. (27) riakehtc sheets.
22 THE GA/ETTE OF INDIA EXTRAORDINARY [PART I-SFC 1] I 2 30u8) CRCA Sheets. (29) Laminations,
(jrio) Phosphor Bronze Strips. Cm) Asbestos Sheets,
216. S. No. 11 t(viij
The following may be inserted : —
Col. 4 & 5
(a) Copper ingots/copper scrap. (6) zinc, (e) Brass scrap. (d) Tin. Tin will be allowed only up to 20% of the face value of the licence.
11" the export products indicated in Col. 2 against S. No. T II (vii) are clectiopiated, the following additional items may also be allowed import upto the face value lcstrictions, if any, indicated against each :—
(a) Primary nickel. (6) Nickel anodes, Upto 50% of the face value
lead anodes, cadmium oi the licence, anodes.
(c) Electroplating salts and Upto 20% of the face value
brightneis. of the licence.
(J) l'ct bobs. Upto TO% of the face value
of the licence.
S. No. i2fi
219.
Entry (d) under 2. m.iy be amended to read as under :—
"(d) Nickel anodes, lead anodes and cadmium anodes".
Col. 4.
219 220. S. No. 128
The following may be inserted after (h) :—
(1) Transistors, diodes, [Item (1) to (.six) to be allowed Cols. 4 & j.
Thermistors, all sorts. with an all overall ceiling
0) Valves, all sorts, of Rs. 1,000/- only for (k) Vibrators. each quarterly application.
(/) Valve holders and accessories. (m) Condensers all sorts, including electrolytic and gang. (n) Connecting wires. (0) Volume controls/tune controls, nil sorts, (p) Resistors, all sorts. (?) Magnets. 00 Alu. Metal & high permeability laminations. (4) Elcclncal insulating material, (0 Mylar and Celluloid Sheets. (u) Cables. (v) Connectirg strips. (w) Paints & Varnibh. (x) Nichromc wire. Cy) Kcobs.
(*) Aluminium and enamelled winding wire.
(") Switches. ("") Recording tapes for performance testing,
(ssiii) Stereo records for performance testing.
[PART 1-SFC t] THE CAZETTE OV INDIA EXtRAOtLGlNARV 1%2 I 3 vision receivers
(sni) Duralumin foil (n) Aluminium foil (ivi) Adhesive1* (xvii) Component parrs of tele (nm) L I\ Transformers (xix) Transformers.
(zx) Tape recorder parts (mxi) Recording topes and
hardware for tape-recor-
ders
(zxu) Microphone for tape-
recorders.
Items (zx) to (xxn) allowed only to registered expor- ters manufacturers of pub- lic Address Equipment who are also registered as exporters manufacturers of tape-recorders with the further condition that im- port of item (xx) will be restricted to 50% of the tace value of the import replenishment licence and each of the items (7v.i) and (zxn) will be restricted to 10% of the face value of the import replenish- ment licence.
(stxm) Component parts of re-
cord-changers, players and pick-ups.
To be allowed to registered exporters—manufacturers of amphgrami only with the further condition that the import will be allowed upto 50% of the face value of the import re- plenishment licence
(zxw) Complete lecord chan-
gers, players and pick-ups
To be allowed against actual exports only of amph- grams with the further condition that the import will be within jo% of the face value of import re- plenishment licence.
o 131
2?o. S.N
Cola. 4&5.
The following may be inserted af (6) Component parts of re- cord changers players and pick-ups.
ter 5 — To be allowed to registered exporters—manufacturers of Radiograms only with the further condition that the import will be allowed upto 50% of the tnce value of the licence
(7) Complete record chang- erSj players and pick-ups
To be allowed against actual exports only of Radiograms with the fur- ther condition that the im- port will be within 50% of the face value of the import replenishment licence.
24 THE GA7t?TTE OF INDIA EXTRAOftfttiMARY [PART t-Srr ?1 2 I 3 -ifter 10 :—
The following may he inserted E
S. No. 132.
220.
Cols. 4 & 5.
— (ii) Component parts of re- cord changers, pluyers and pick-ups.
To be allowed to registered exporters—manufacturers of Radiograms only with the further condition lhai the import will be allowed upto 50% of the face value of the licence.
(12) Complete record chan- gers , playe rs and pick-ups.
To be allowed against actua' exports only of radio- grams with the further condition that the import will be within 50% of the face value of the import re- plenishment licemcc.
ifter (e) :—
The following may be inserted 1
S. No. 135
221.
Col. 4.
- (f) Teflon. (g) Fluon. (/z) Vydax, (1) Phosphaling compound. (J) Polishing compound.
"ter (a) :—
S. No. 148
223.
The following may be inserted af (b) En series steel bars/rod-..
The following may be inserted
coT4
S. No. I52(vii)
223-224.
(a) High carbon spring steel strips/wires.
(6) Rolled Nickel anodes: Upto 50% of the face vnlue Cols. 4&5-
of the licence,
(c) Primaiy nickel.
P. D. KASBEKARj Chief Controller of Imports and Exports.
PRINTED IN INDIA BY THE GENERAX MANAGER, GOVERNMENT OF INDIA PHES3, NEW DELHI AND PUBLISHED BY THE MANAGER OF PUBLICATIONS, DELHI, 1 9 68