Servants of Knowledge
Extraordinary Gazette of India · Government of India

Subject NOT available

Published 27 January 1968

Ministry
Ministry NOT available
Type
Extra Ordinary
Download
GV_Content_Detail$ctl15$lnkflname_Pdf_Img
Gazetteid
E-1592-1968-0031-71520
Identifier
in.gazette.csl_extraordinary.1968-01-27.E-1592-1968-0031-71520
Languages
English, Hindi
Published at
Original source ↗

रजिस्ट्री सं ० डी० 221

REGISTERED No. D. 221

भारत का राजपत्र The Gazette of India

अलाधारण

EXTRAORDINARY

भाग II-खण्ड 3-उपखण्ड ( ii)

PART II - Section 3- Sub- section ( ii )

प्राधिकार से प्रकाशित

PUBLISHED BY AUTHORITY

सं० 31]

नई दिल्ली, शनिवार , जनवरी 27, 1968 /माघ 7, 1889

No. 31)

NEW DELHI , SATURDAY , JANUARY 27 , 1968 / MAGHA 7 , 1889

इस भाग में भिन्न पृष्ठ संख्या वी जाती है जिससे कि यह अलग संकलन के रूप में रखा जा सके ।

Separate paging is given to this Part in order that it may be filed as a separate compilation.

MINISTRY OF COMMERCE

NOTIFICATIONS

New Delhi , the 27th January 1968

S.O. 371. In exercise of the powers conferred by section 6 of the Export (Quality Control and Inspection ) Act . 1963 ( 22 of 1963 ) , and after previous publi- cation as required by rule 11 of the Export ( Quality Control and Inspection ) Rules , 1964 the Central Government herchy-

( 1) notifies that the stainless steel utensils shall he subject to quality con- trol and inspection prior to export ;

( 2 ) specifics the type of inspection in accordance with the Export of Stain- less Steel Utensils ( Inspection ) Rules . 1967 as the type of inspection which will be applied to such stainless steçl utensils ;

(3 ) recognises

(a) the specifications , which shall be a national standard of a foreign country , declared by the exporter as the agreed specification of the export contract , or (b) in the absence of any specifications as mentioned in ( a ) above , the specifications as set out in Annexure I to this notification , or

(c) the Indian Standards Specifications for stainless steel utensils wher- ever issued by the Indian Standards Institution , as the standard specification for stainless steel utensils .

(4 ) prohibits the export , in the course of international trade , of stainless steel utensils unless the consignment of such stainless steel utensils is accompanied by a certificate issued by an agency recognised by the Central Government under section 7 of the Export ( Quality Control and Inspection ) Act , 1963 ( 22 of 1963 ) , to the effect that the same

( 63 ) THE GAZETTE OF INDIA EXTRAORDINARY

[PART II ---

64

conforms to the standard specifications under ( 3 ) , above , and the instructions issued by the Export Inspection Council in this behalf, or it has affixed or applied to it a mark recognised by the Central Go ernment under section 8 of the said Act , indicating that it conforms to the standard specifications applicable to it .

2. Nothing in this notification shall apply to the export by land, sea or air of samples of stainless steel utensils to prospective buyers , provided the F.O.B. value of the consignment does not exceed rupees one hundred and twenty five .

3. In this notification " stainless stcel utensils " shall mean any kind of utensils or vessel for domestic or other allied use made from stainless steel .

4. This notification shall come into force on the 1st March , 1968 .

Specification for stainless steel utensils

1. Material

1.1 . The material used for the manufacture of utensils shall be of stainless steel conforming to Designation 04 Cr . 19 Ni 9 or 07 Cr . 19 Ni 9 of schedule V of IS : 1570--1961 - Indian Standards Schedules for wrought steels for general engineering purposes or any other equivalent natlonal standard .

1.2 . The thickness of the sheet used shall be subject to agreement between the buyer and the seller .

4. Shapes and Dimensions

2.1 . The shapes and dimensions of utensils shall be subject to agreement bet- ween the buyer and the seller . The dimensions shall have the following tolerances :

Over

Tolerances

Upto and including

mm .

.וחות

50

I

100

30

+2 100

200

±3 200

± 5

3. Workmanship and Finish

3.1. Edges of the utensils shall not be left sharp . The utensils shall be finished bright all over. The utensils shall be free from distortion , dents , wringles , scratches , pittings , deep tool marks and other surface defects .

4. Test

4.1. Staining Test . The materials of the utensils , when immersed for 16 hours In each of the following solutions , shall not show any sign of staining after re- moval from each solution at the end of the above period , namely :-

( a) Ten grams of glacial acetic acid ( 99 per cent ) dissolved in distilled water to make 100 ml . and ;

(b) Five grams of pure sodium chloride , dissolved in distilled water to make 100 ml .

5. Marking

5.1 . Unless otherwise stipulated by the buyer , utensils shall be legibly marked at the bottom with the manufacturers name , trade mark or identification mark . Utensils shall be marked ' stainless steel . The Impression of the marking shall not show up on the other side .

6. Packing

6.1 . The package shall be well finished and have a good presentability. The Inner contents of the package shall be so packed as to withstand the following tests as given below .

THE GAZETTE OF INDIA EXTRAORDINARY

Suc . 9 ( i ) )

65

6.1.1 . Drop Test ( for head load upto 37 kg . only )

One package shall be dropped from a height of 120 cm. once on the largest flat surface , once on the longest edge and once on any corner of its own .

6.1.2 . Rolling Test ( upto 500 kg . only ) .

One package shall be subject to colling on its sides either six metres forward and six metres backward or twelve metres in one direction only .

6.1.3 . Water Spraying Test

One package shall be allowed to be exposed against a water spray equivalent to a normal sudden monsoon shower for five minutes .

7. Sampling and Criteria for conformity

7.1. Sampling for inspection of cach consignment and the criteria for conformity shall be in accordance with the scale prescribed in the Table below:

7.2. In any consignment , all the stainless steel utensils of the same type and size, shall be grouped to constitute a lot , except for destructive test where all types and sizes made of same materlal shall be grouped to constitute a lot .

Sample size

B

A

Permissible No. of defective A B Lot size

Non- destructive Destructive

test

test

Non - destructive Destructive test test

Nil

3

One per lot

Upto 25

Do.

5

26 to 50

0001

8

Do.

51 to 100

13

Do.

101 to 150

20

Do.

I

151 to 300

2

Do.

32

301 το 500

Do.

3

50

501 and above

[ No. 60 ( 31 ) Exp - Insp / 67 . ]

S.O. 372. In exercise of the powers conferred by section 17 of the Export (Quality Control and Inspection ) Act , 1963 ( 22 of 1963 ) , the Central Government hereby makes the following rules namely:-

1. Short title and commencement .- ( 1 ) These rules may be called the Export of Stainless Steel Utensils ( Inspection ) Rules , 1967.

(2) They shall come into force on the 1st March , 1968 .

2. Definition. In these rules " stainless steel utensils " shall mean any kind of utensils or vessel for domestic or other allied use made from stainless steel .

3. Basis of Inspection .- ( 1 ) Inspection of stainless steel utensils intended for export shall be carried out with a view to seeing that the stainless steel utensils conform to the specifications recognised by the Central Government under section 6 of the Export ( Quality Control and inspection ) Act, 1963 ( hereinafter referred to as the recognised specifications ) or , as the case may be , any other additional requirements stipulated by the buyer in the export contract .

(2) No further inspection would , however , be necessary under these rules in the case of such stainless stect utensils as bear the Indian Standards Institution Certification Mark .

4. Procedure for Inspection ...( 1 )( 1 ) An exporter intending to export stainless steel utensils shall give intimation in writing of his intention so to do and submit along with such intimation a declaration of the specifications stipulated in the export contract to any of the inspection agencies ( hereinafter referred to as the agency ) , recognised under section 7 of the Export ( Quality Control and Inspection ) Act, 1963. ( 22 of 1963 ) to enable it to carry out the inspectionin accordance with rule 3 .

( 2) Every intimation and declaration under sub - rule ( 1 ) shall reach the office of the Agency not less than ten days before the scheduled time of loading of the 'THE GAZETTE OF INDIA EXTRAORDINARY

[PART H- 66

consignment of stainless steel utensils for shipment and a copy of such intimation shall also be simultaneously endorsed to the nearest office of the Export Inspec- tion Council .

(3 ) On receipt of the intimation and declaration under sub - rule ( 2 ) , the Agency shall carry out the inspection of the stainless steel utensils during the process of manufacture or when the consignment is ready , as the case inay be , in accordance with rule 3 .

(4) If after inspection , the Agency is satisfied that the stainless steel utensils to be exported comply with the requirements of rule 3 , and the instructions issued by the Export Inspection Council in this behalf , it shall , within seven days of the receipt of intimation and declaration under sub - rule ( 2 ) , but not later than 72 hours after completion of the inspection , issue a certificate to the exporter declar- ing the consignment as export - worthy .

5. Procedure for affixation of recognised mark. The provisions of the Indian Standards Institution ( Certification Marks ) Act , 1952 ( 36 of 1952 ) , the Indian Standards Institution ( Certification Marks ) Rules , 1955 , the Indian Standards Institution ( Certification Marks ) Regulations , 1955 and the procedure laid down by the Indian Standards Institution in this behalf shall , so far as may be , apply to the inspection of stainless steel utensils prior to export .

6. Place of Inspection . Every Inspection under the rules shall be carried out either-

( a) at the premises of the manufacturer , or

(b ) at the premises at which the goods are offered by the exporter , pro- vided adequate facilities for the purpose exist therein .

7. Inspection Fec .-- Subject to a minimum of Rs . 50 / a fee at the rate of twenty paise for every one hundred rupees of the F.O.B. value of each such con- signment shall be paid as inspection fee for inspection of stainless steel utensils under rule 4 of these rules .

8. Appeal . ( 1 ) Any person aggrieved by the refusal of the Agency to issue a certificate under sub - rule ( 4 ) of rule 4 may , within ten days of receipt of com- munication of such refusal by him , prefer an appeal to a panel of experts consisting of not less than three persons appointed for the purpose by the Central Govern- ment .

[No. 60 ( 31 ) Exp.Insp / 67 . ]

S.O. 373. In exercise of the powers conferred by section 7 of the Export (Quality Control and Inspection ) Act , 1963 ( 22 of 1963 ) , the Central Government hereby recognises the following organisations mentioned in the schedule annexed hereto as the agencies for the inspection of stainless steel utensils prior to export subject to the condition that every such organisation shall give adequate facilities to an officer of the Export Inspection Council duly authorised by the said Council to examine the method of inspection followed by that organisation in granting the certificate under sub - rule ( 4) of rule 4 of the Export of Stainless Steel Utensils ( Inspection ) Rules , 1967 .

1. Officers - in - charge , Quality Marking Centres ( Eng . ) , Dte . of Industries , Punjab at Faridabad , Sonepat , Jagadhri , Malerkotla , Ambala, Ludhiana , Jullunder & Amritsar.

2. Export Inspection Agency , Calcutta , 14 / 1 - B , Ezra Street ( 10th floor ) . Calcutta- 1 .

3. Export Inspection Agency , Bombay , ' Mani Mahal' , ( 2nd floor ) , 11/21 Mathew Road , Opera House , Bombay - 2 .

4. Export Inspection Agency , Delhi , 2179 , Gurudwara Road , Karol Bagh . New Delhi - 5 .

5. Export Inspection Agency , Madras , World Trade Centre , Sire Mansion , 123 , Mount Road , Madras - 6 .

6. Export Inspection Agency , Cochin , Monohar Buildings , Mahatma Gandhi Road , Ernakulam .

Explanation . The expression " stainless steel utensils " for the purpose of this notification , shall mean any kind of utensil or vessel for domestic or other allied use made from stainless steel .

[ No. 60 ( 31 ) Exp . Insp / 67 . ] THE GAZETTE OF INDIA EXTRAORDINARY

Stc. 3 ( i) ]

67

S.O. 374. In exercise of the powers conferred by section 8 of the Export (Quality Control and Inspection ) Act , 1963 ( 22 of 1963 ) , and after previous publi- cation as required by sub - rule ( 2 ) of rule 11 of the Export ( Quality Control and Inspection ) Rules , 1964, the Central Government recognises the Indian Stancards Institution Certification Mark with respect to stainless steel utensils for the pur- pose of denoting that where stainless steel utensils are affixed or applied with such mark , they shall be deemed to be in conformity with the standard specifica- tion applicable thereto under clause ( c ) of section 6 of the said Act .

Explanation . The expression " stainless steel utensils " for the purpose of this notification , shall mean any kind of utensil or vessel for domestic or other allied use made from stainless steel .

[No. 60 ( 31 ) Exp . Insp / 67 . ]

S.O. 375. In pursuance of rule 8 of the Export of Stainless Steel Utensils (Inspection) Rules , 1967 , the Central Governmentent hereby appoints the persons mentioned in column ( 2 ) of the Table given below as thes the panel of exports for the purpose of hearing appeals under the said rules against the decision of the Export Inspection Agency mentioned in the corresponding entry in column ( 1 ) thereof :

Provided that where a member of any of the said panels is personally interest- ed in the subject matter of any appeal , he shall not take part in the proceedings relating to that appeal ,

Persons constituting the panel of experts to which Authority against whose decision appeal lies

appeal lies

(2)

(I)

Mechanical Engineering Department , Jadavpur University , Calcutta - 32 1. Prof. - in - charge , Chairman

Export Inspection Agency , Calcutta carrying out inspection in the arcas covered by the States ofAssam , West Bengal , Bihar , Orissa , and Nagaland and the Union territories of Manipur and Tripura .

2. The Director of Inspection ( ex - officio) , Calcutta Inspection Circle , Department of Supply and Technical Develop- ment, Directorate General of Supplies & Disposals , 1, Ganesh Chandra Avenue , Calcutta - 13 .

3. Shri D. D. Saraf, M/s . Nathmull Girdharilall , IIA , Jatindra Mohan Avenue , Calcutta - 6

4. Shri S. A. Kandaswamy , M/ s . Harshadray Pvt . Ltd. , 23 , Brabourne Road , Calcutta - 1 .

5. Shri M. L. Shroff , M/ s . Bharat Exports Limited, 9B, Chowringhee Place, Calcutta- 13 .

6. Director (ex - officio) , Small Industries Service Institute , 111 & 112 , B.T. Road , Calcutta- 35 .

Convener

7. Dy. Director (ex - officio ) , Export Inspection Council , 14/ 1 - B , Ezra Street , Calcutt1-1

1. Director ( ex - officio) ,

Chairman Export Inspection Agency, Bombay carrying out inspection in the areas covered by the States of Maharashtra , Gujarat , Madhya Pradesh and the Union Territory of Goa .

Small Industries Service Institute , Andheri Kurla Road , Bombay THE GAZETTE OF INDIA EXTRAORDINARY

68

[PART II-

(2)

(2)

2. The Director of Inspection ( ex - officio) , Bombay Inspection Circle , Department of Supply & Technical Develop- ment, Directorate General of Supplies and Disposals , Aayakar Bhawan Annexe , New Marine Lines , Bombay.

3. Shri P. N. S. Razdan , M/ s . K. R. Metals Pvt . Ltd. , 3rd Bhoiwada , 64, Bhuleshwar , Bombay-2.

4. Shri Madanlal Gupta , M/ s . Pear Metal Works , 20 , Wadi Bunder Road , Mazagaon, Bombay - 10 .

5. Shri G. T. Shah , M/ s . Lallubhai Aminchand Pvt . Ltd. , 225/27, Tardeo Road , Bombay - 7 .

6. Shri Harilal Ratilal Bhuta , Arco Metal Industry , 413F , Vasantwadi , Kalbadevi , Bombay - 2 .

7. Shri S. D. Nagpal , M/ s . Nagpal Metals Pvt . Ltd. , 1181 -C.G.D. Ambekar Marg, Bombay - 12 .

Convener

8. Joint Director , Export Inspection Council , 'Mani Mahal' ( 2nd floor ) , 11/21 , Mathew Road , Opera House , Bombay

Chairman

1. Director (ex - officio ), Small Industries Service Institute , Industrial Estate , Okhla , New Delhi

Export Inspection Agency , Delhi carrying out inspection in the areas covered by the States of Punjab , Uttar Pradesh , Rajasthan , and Jammu andand Kashmir and the Union territory of Himachal Pradesh .

2. The Director of Inspection ( ex - officio ) , Northern Inspection Circle , Department of Supply & Technical Develop- ment , Directorate General of Supplies & Disposals , New Delhi .

3. Shri J. P. Goyal , M/ s . Prakash Metal Industries , Jagadhri (Haryana) .

4. Shri Kanta Parshad , M/ s . Shibu Metal Works , Jagadhri (Haryana) .

5. Shri O. P. Saraf , M/ s . Saraf Industries , Raghugunj ( 2nd floor ) , Chawri Bazar , Delhi - 6 .

6. Shri S. S. Gill , Technical Expert ( Production Engineering) , Directorate of Industries , Punjab , Chandigarh .

Convener

7. Dy .. Director Director ( Quality Control ) , ( ex - officio) Export Inspection Agency , 2179 , Gurdwara Road, Karol Bagh , New Delhi THE GAZETTE OF INDIA EXTRAORDINARY

SEC . 3 ( ii ) ]

69

(2)

1. Director ( ex - officio) , Small Industries Service Institute , Guindy, Madras

Chairman Export Inspection Agency , Madras and Cochin carrying out inspection in the areas covered by the States of Madras , Andhra Pradesh , Mysore and Kerala .

2. The Director of Inspection ( ex - officio ) , Madras Inspection Circle , Department of Supply & Technical Develop- ment , Directorate General of Supplies & Disposals , 18 - A , Woods Road , Madras- 2 .

3. Shri Arjun Panjabi , M/ s . Lal Metals & Alloys Industries , 20, Tiruchinan Kuppam Road , Madras - 19 .

4. Shri K. Sagarmall Jain , M/ s . R. K. Manufacturers , 46, Govindappa Naick St. , Madras - 1 .

5. Shri K. Hastimall Jain , M/ s . R. K. Manufacturers , 46, Govindappa Naick St. , Madras - 1 .

6. Prof. Dr. E. G. Ramachandran , Head of the Department of Metallurgy, Indian Institute of Technology , Ι.Ι.Τ. Ρ.Ο. , Madras- 36. Convener .

2. The quorum of the panel shall be three .

[No. 60 (31) ) Exp . Insp / 67 . ]

A. C. BANERJEE , Jt . Secy.

PRINTED IN INDIA BY THE GENERAL MANAGER , GOVERNMENT OF INDIA PRESS , NEW DELHI AND PUBLISHED BY THE MANAGER OF PUBLICATIONS , DELHI , 1968 1

Cite this issue. Extraordinary Gazette of India, Government of India, 27 January 1968. Indian Gazettes, https://egazette.servantsofknowledge.in/details/in.gazette.csl_extraordinary.1968-01-27.E-1592-1968-0031-71520/. Archive identifier in.gazette.csl_extraordinary.1968-01-27.E-1592-1968-0031-71520.