Subject NOT available

click here for IIIF manifest

REGISTERED No. D. 221

The Gazette of India

EXTRAORDINARY

PART I—Section 1

PUBLISHED BY AUTHORITY

No. 18] NEW DELHI, MONDAY, FEBRUARY 3, 1969/MAGHA 14, 1890

Separate paging is given to this Part in order that it may be field

as a separate compilation.

MINISTRY OF COMMERCE

PUBLIC NOTICES

IMPORT TRADE CONTROL New Delhi, the 3rd February 1969

SUBJECT.—Import Policy for Registered Exporters lor the year April, 1968—March, 1969

No. 25-ITC(PN)/69,—Attention is invited to the Import Policy for Registered Exporter; contained in Volume II of the Import Trade Control Policy Book (Red Book) for the year April, 68—March, 1969, issued under the Ministry of Commerce Public Notice No. 50- ITC(PN)/68, dated 1st April, 1968, as amended from time to time.

(2) The following amendments may be made at the apropriate places as indicated below:—

Amendment

Reference

Page No. of the Red

Book Vol. II

B-50

After the existing entry at (c), the following entry may be

made:— "(d) Carbide Planor Knives."

Column 4

( 7 3)

SUBJECT.—Import Policy for Registered Exporters for the year April, 1968—March, 1969.

No. 26-ITC(PN)/69-Attention is invited to the import Policy for Registered Exporters contained in Volume II of the Import Trade Control Policy Book (Red Book) for the year April, 1968—March, 1969 issued under "the Ministry of Commerce Public Notice No. 50-ITC(PN)/68, dated 1st April, 1968,

(2) The following amendments, may be made at the appropriate placet as indicated below:—

Amendment

Reference

Page No. Jf the Red

Book Vol. II

A. 168

lowing may

.. 167, the fol 43

After th be adi

o existing entry at S. No. A led under Cols, i to 3:—

Cols, i to 3

i

2

3

20%

U16.

B. 66

iy be added

following mi

A. 168 After the under

Belt links for machine gv. existing entry at B. 65, the Cols. 1 to 4:—

Coh. i to'4

I

2

4

3

B. 66 Graphite Powder

60% (a) Gra- phite lump*.

(3) Consequent to the above amendments, the following item* may be inserted alpha- betically at the appropriate places of the Index of the above Red Book:—

A. Engineering Goods.

1. B

B. Chemicals and Allied Products.

1. Graphite powder

B.66

4-,It .is .clarified for the information of .the Trade that Forgings listed in Public Notice No 259/TTC(PN)/6g, dated 4th December, 1968 and classified under, item A 131 relate to automobile, vehicular. Earth, moving and industrial applications and not to Bicycle components. Forging* mentioned elsewhere in the Red Book e.g. Drop forged and hand tools will continue to be classified as per' existing policy.

SVBJUCt.—Import Poltcv for Registered Exporters for the year April, 1961—March, 1969.

No. 27-ITC(PN)/69.—Attention in invited to the Import Policy for Roistered Exporters contained in Vol. n of the Import Trade Control Policy Book (Red Book) for the year April. 1968—March, 1969, issued under the Ministry of Commerce Public Notice No. rrcrPN)/68, d^ted. April, 1968, BJS amended from time to time.

frA*T 1—&c. t t r ie cWfiTTE OF INDIA EXTRAORDINARY 75

(2) The following amendments may be made at the appropriate places as indicated

btlow:—

Reference

Amendments

Page No. of the Red

Book (Vol. II)

1

3

A. 145.1

For the existing entry at (a), the following may be substi-

tuted :—

"(a) High Carbon steel/wire strips (unmarked and un-

calibrated)."

B. 45.3

The following entries may be inserted:—

5*

Col. 4

"(a) Ball day \ Superior Grades.

(*) China clay-' / re) Tin Oxide. (d) Zirconium opacifiera. C") Ceramic Colours. if) High density grinding media. (V) Silex lining for ball mills. (h) Nylon cloth for filter presses. CO Heating elements (other than banned types). ij) Spare parts for ceramic machinery and kilns (other

than refractories).

(*) Alumina."

B. 45.4

<"

The following entries may be inserted:—

Col. 4

"(a) Ball clay \Superior grades.

(b) China clay / (c) Tin Oxide. (d) Zirconium Opacifiers. (e) Pig Lead. (/) Zinc metal. (g) High density grinding media. (h) Silex lining for ball mills. CO Nylon cloth for filter prosses. CD Heating elements (other than banned types). (k) Spare parts for ceramic machinery and kilns other

than refractories).

0) Alumina."

B.45.5

The following entries may be inserted:—

5

Col. 4

"(a) Ball clay \ Superior grades

(ft) China clay / (c) Tin Oxide. (d) Zirconium Opaciflers. (e) Natural eponges. (f) High density grinding media. (g) Silex lining for ball mills. Oi) Nylon cloth for filter prosses. CO Heating elements father than banned types). CJ) Sparc parts for ceramic machinery and kilns other

than refractories.

(K) Ceramic colours. CD Alumina."

B. 58.1 T

60—Si

he full stop occuring at the end of entry CB) may be re- placed by Coma and the following may be inserted three

after:—

C H4

"Highly polished aluminium plates for offset printing

I

2

3

61 B. $8,4 and B. 58.5 The following may be inserted in Col. 5 against theie two

Col. 5

serial numbers:— "The import of newsprint of 20 to 30 g.s.m. may also be

allowed against the export of this item."

C. 9.1

After the existing entries at (d), the following may be added:—

63

Col. 4

"(") Carbon black (Cosmos II) and (Excelsior bends). (ft Congo gun. (g) Printing blocks. (h) Chilled iron rollers. (i) Rotothinner."

63 C. 9.2

After the existing entry at (c), the following may be added:—

Col 4

"(d) Carbon black (Cosmos II) and (Excelsior bends).

(") Congo gum. (0 Printing Block'!. (a) Chilled iron rollers. (n) Rotothinner."

SUBJECT.—/n/porf Policy for Rtgistertd Exporters for lite year April, 1968—Mare/i, 1969.

No. 28-ITC(PN)/69.—Attention is invited to the Import Policy for Registered Exporters contained in Volume II of the Import Control Policy Book (Red Book) for the year April, 1968—March, 1969, issued under the Ministry of Commerce Public Notice No. 50-ITC(PN)/ 68 dated the 1st April, 1968.

(2) The following amendments may be made al the appropriate places as indicated below :—

Amendments

Reference

Page No. of the Book

1. The figure "60%" occurring in Crl. 3 against these two 80 L. 2.1 and L. 2.2

— serial numbers mav be amended to rend as "70%".

Cols. 3 and 4

2. The face value limit of "(8-1/3%)" occuring in Col. 4 at (b) of S.No. L. 2.1 and at (c) of L. 2.2 may be amended

to read as "(7-1/2%)".

1. The figure "50%" occuring in Col, 3 agninsit those two 81 L. 3.1 and L. 3.2

serial numbers may be amended to read as "60%".

Cols. 3 and 4

2. The face value limit of "(10%)" occuring in Col. 4 at (b) of S. No. L. 3.1 and at (c) of L.3.2 may be amended to

read as "(8-1/3%)".

NOTE: The above revised rates shall be applicable in respect of exports made on and after

1-7-1968,

SUBJECT. Import Policy for Registered Exporters for the year April, 196ft—March,

1969.

No. 29-ITC(PN)/e9.—Attention is invited to the Import Policy tor Registered Exporter* contained in Volume II of the Import Trade Control Policy Book (Red Book) for the year April 1968—March, 1969 Issued under the Ministry of Com- merce Public Notice No. 5O-ITC(PN)/68, dated 1st April, 1968-

11*A*T I—SEC. lj TUL 0,- ,;F1IX OF INplA KXlkAOKPlNARY 77

(2) The Import Policy for Registered Exporters provides the import of plastics raw materials against export ol various products and more particularly against plashes products. There is also a provision for claiming import of som* of these raw materials on the. basis of AU. licences. In view of satisfactory arrangements having been evolved for supply of some of these raw materials from indigenous sources, the Government of India have Issued a scheme for supply oJt raw materials at international prices by indigenous manufacturers for, export production. The salient features of the Scheme are that for the time being (i) Polyethylene granules/moulding powder, both low density and high density, (hereinafter re- ferred to as polyethylene), (ii) polyyinyl chloride (PVC) resin and composition .(hereinafter referred to as (PVC), (iii) polystyrene, (iv) PVC sheeting and (v) PVC foam sheeting and cloth are covered under the Scheme- A 6ystem of release of supplies from the manufacturers who have agreed to supply law materials at international prices under the scheme, has Deen mtrouuccd. The particulars of raw material and the names of the manufacturers are specified In Annexure I to this Public Notice.

(3i The registered exporters and their nominees seeking to secure supplies of the materials listed- in Annexure I to this Public Notice are required to as- certain from the manufacturers mentioned thereto whether they are willing to supply the specification and quantity of material required within three months at the concessional price corresponding to the international price fixed- The liicensdiig authorities will consider requests from Registered JCxporters or their nominees for import of such of the raw materials as are permissible for Import for export production only if their applications are accompanied by letters from all the concerned manufacturers expressing their inability to supply the material. In order that applications may not be delayed on account of the manufacturers' certificate, registered exporters are advised to write to the manufacturers suffi- ciently in advance by registered A.D. If no reply is received from them within 7 daya of the receipt of the letter, it may be assumed that manufacturers are not in a position to supply. In that case, Instead of the manufacturer's certificate, re- ferred to above, an applicant for licence may forward a copy of nis letter to the manufacturer together with the declaration to the effect that no reply has been received within 7 days or subsequently from any or all of the manufacturers.

(4) The scheme contemplates release of materials at international prices by Indigenous manufacturers to the extent they are nominated under the registered exporters policy. The manufacturer so nominated may utilise his nomination for either:

(I) import of materials permissible to such a nominated manufacturer under

the Registered Exporters policy, or

(II) adjusting against the export obligation imposed on him under a C-G-

licence.

In the former case, the details of the nomination have to be settled between the two parties and application made to the licensing authorities by the exporter and the nominee in the norman course. In the letter case, applications for release orders for supply of Polyethlene/PVC/PVC sheeting from the manufacturers are to be made alongwith the import application under the Registered exporters policy In the form at Annexure II to this Public Notice. Part I of the application i" to be filled in by the Registered Exporter and the nominee for the re'ease orders and forwarded In quadruplicate to the licensing authority. The licensing authority will fill in Part II of the form and return three copies to the person in whose favour the release order is issued. After obtaining the release order the person getting the material will fill in Part III of the lorm and forward two copies there- of to the supplier of the material-

f5) A person holding a licence under the import policy for registered exporters, for import of polyethlene/PVC, may within the validity period of the licence apply to the concerned licensing authority in the form at Annexure III to this Public Notice. The disposal of tht four copies of the application to be forwarded, will mutastis mutandis, be as in paragraph 4.

(6) All releases of raw material made under the scheme for supply of indigen- ous plastic raw materials will be subject to the condition that the material re- leased would be used for manufacture in the factory of the person In whose favour release order is issued-

(7) Registered Exporters are advised to contact the Export Proraotion Councils with whom they are registered for obtaining full dfttails of the scheme and the procedure for obtaining releases thereunder-

ANNEXURE I

Names of indigenous-manufacturers who have agreed to mpply raw materials at

International prices

Name of Manufacturer

1. M/s. Alkali & Chemical Corp- of India Limited, ICI House, 34, Chowringhe, Calcutta-16.

2. M/s. Rajasthan Vinyl & Chemi- cal Industries, Naaz Build- ing, Jhandewalan, New Delhi-i.

3. M/s. Union Carbide India, Ltd., l, Middeton Street, Cslcutta- 76.

4. M/s, Chemicals & Plastics Limited, Dhun Building, 175/1, Mount Road, Madras-2.

S- M/s. National Organic Chemical Industries Limited, Sandoz House, Dr. Annie Basant Road, Worll. Bombay-18.

b. M/s- Polyoleflnes Industries Ltd., Neville House, Currim- bhoy Rbad, Ballard Estate, Bombay-i:

7. M/s. Polychem Limited, New Great Insurance Building, 7, Jamshedji Tata Road, Church Gate, Reclamation, Bombay-I.

8,. M/s. Bhor Industries Pvt., Ltd., SJr Vlthaldas Chambers, 16, Apollo street, Bomhay-1.

6. M/s. Caprjhans (India) Pvt., Ltd., Janmabhoomi Chambers, Fort Street, Ballard Estate, BDmtay-i.

Raw material agreed to be supplied,

Low density polyethylene—Injection moulding grade; Blow moulding grade; Extrusion grade; Lamin- ation grade; Black film grade, compound; Black pipo grad* .com- pound.

P.VC. reain—Suspension grade Electrical grade.

Low density polyethylene—Injection moulding grade; Blow mouldinf grade; Extrusion grade; Laminatior. grade-

P.V.C. resin—Suspension grade Electrical grade; Past© grade.

P.V.C resin—Suspension grade;

Electrical grade.

High density polyethylene—Injec- tion moulding grade; Blow mould- ing grade-

Polystyrene—General purpose; High

impact-

P.V.C. sheeting (unsupported)^ P.V.C. foam sheeting and cloth

P.V.C, sheeting (Unsupported).

ANNEXURE

(To be submitted in quadruplicate)

Release order for Polyethylene"/PVC* under the Import Policy for Rejrfrtered Exporters (PART I: To be filled in by the registered exporter)

1. Name and address of the registered-exporter. 2. E-P. Council with which registered, and Registration No. 3. Period of export to which application relates. 4. Product exported (amplify in terms of description in

tie Red Book). fl, Quantity exported. 9 ITOB value of export.

7- Rate of import replenishment permissible. 8- Value of import licence permissible. 9. Value for which an import licence is asked for, either in own name or in the name of a nominee-manu- facturer.

10. Value for which release order is sought. 11. Description of material for which release order is sought- 12. Name and address of supplier from whom release of

material is sought

13- In the case of a merchant-exporter, name of nominee- manufacturer, in whose favour release order Is sought.

•delete whatever Is inapplicable-

We certify that the facts stated above are true to the best of Our knowledge and belief. State. Date.

Signature of registered-exporter.

We further declare that the materials obtained under the release order will be used in our factory as raw material for manufacture.

State. Date.

Signature of person in whose favour re- lease order is sought.

(PAET II: To be filled in by the Licensing Office).

14. FOB value accepted after scrutiny- 15. Total import licence permissible. 10. Value for which import licence is being issued. 17. Value for which release order is recommended- 18- Description of material to be released. ID- Name and address of the person in whose favoUr re-

lease order is issued.

20 Name and address of the supplier on whom the release

order is issued.

Station Date.

Joint Chief Controller of Imports & Exports. Dy. Chief Controller of Imports & Exports.

(PART III: To be filled in by the person in whose favour the release order is issued).

21. Certified that raw materi.3¹ as-wer. details below, has been

received in terms of this release order-

(i) Description, (ii) Quantity. (iil) Total international price (ex-factory/For production Centre/Ex-depot, not including excise duty and sales-tax) of the quantity supplied.

(TWfl amount will not represent the actual price paid).

Station. Oat*.

Signature,

ANNnximE i ll

(To be submitted in Quadruplicate) (Release order for Polyethylene*/PVO on surrender of valid rep Import Licence).

(PART I: To be filled in by the Licensee)

1. Name and address pi the licencee. 3. Import licence and. date- 3- Date of expiry of the licence (without counting any grace

period).

4. Materials for Import of which the licence is valid- 5. Total vale of licence valid for Import of Polyethylene"¹/

PVC*.

8. Value of licence already utilised for Polyethylene*/PVC*. 7. Balance value of licence valid for Import of Polyethylene*/

PVC*.

8- Value for which release order ia sought- 9. Description of material for which release order Is sought. 10- Name and address of supplier from whom release of

material is sought.

•delete whatever Is inapplicable.

We certify that the facts stated above are true to the best of our knowledge and belief. We further declare that materials obtained under the release order will be used in our factory as raw materials for manufacture- State. Date-

Signature of licence holder (PART II: To be filled in by the Licensing Office)

11. Value for which release order Is recommended. 12. Description of material to be released. 13. Name and address of the person in whose favour re-

lease order is Issued.

14- Name and address of the supplier on whom the re-

lease order is issued.

Station. Date-

Joint Chief Controller of Imports & Exports- Dy. Chief Controller of Imports: & Exports- (PART III: To be filled in by the person in whose favour the release order issued). 15- Certified that raw material as per details below has

been received in terms of thl$ release order.

(i) Description, (ii) Quantity. (Hi) Total international price (ex-factory price/For pro- duction centre/ ex-depot, not including excise duty and sales tax) of the quantity supplied;

(TWi amount will;.not represent the actual price paid).

Station. Dtt*.

Signature

R. J. REBELLO.

Chief Controller of Imports and Exports.

PRINTED BY THE GENERAL MANAGER, GOVERNMENT OF INDIA PRESS, NEW DELHI AND PUBLISHED BY THE MANAGER OF PUBLICATIONS, DELHI, 1 9 69