REGISTERED No. D. 221
The Gazette of India
EXTRAORDINARY
PART I—Section 1
PUBLISHED BY AUTHORITY
No. 20] NEW DELHI, FRIDAY, FEBRUARY 7, 1969/MAGHA 18, 1890
Separate paging is given to this Part in order that it may be filed
as a separate compilation.
MINISTRY OF COMMERCE
PUBLIC NOTICES
IMPORT TRADE CONTROL
Sow Delhi, the 7th February 1969
SUBJECT.—Import Policy for Registered Exporters for the year April, 1968—March, 1969.
No. 31—ITC (PN)/69.—Attention is invited to the Import Policy for Registered Exporters con tainted in Volume II of the Import Trade Control Policy Book (Red Book) for the year April, 1968 —March, 1969 issued under the Ministry of Commerce Public Notice No.5o-ITC(PN)/68, dated 1-4-1968.
2. The following amendments may be made at the appropriate places as indicated below;—
Amendment
Reference
Page No. of the
Red Boa Vol.II
1
2
3
A.28
(b) Special bonds, (c) Vulcaflx, Desmocoll 176. (d) Abrassive base paper".
( 9 1)
92 THE GAZETTE OF INDIA EXTRAORDINARY [PART I—SEC. 1]
1
2
3
A.53.1
The following may be inserted:—
31
"(a) Fcrro nickel and nickel copper wire (20%)".
Col. 4
A. 123
The existing entries may be substituted by the following:—.
39
Cols. 1 to 4
1
2
4
3
A. 123
Small and other cutting tools, not elsewhere covered, namely, the following
(a) High Carbon steel in any A.r23.i. All others not speci- 4 0%
rolled form.
fied here under.
(b) High speed steel in any shape or form including drawn and/or centreless ground sections.
A. 123.2 Bonded abrasives.
4 0% (a) Synthetic abrasive grains (b) Special bonds. (c) Silenc A, TIOO. (d) Dismodum-R. (e) Archlor 1254. (f) Gltiss fabric discs'".
A. 124
The following may be inserted:—.
39
Col. 4.
'•(a) Phospher Bronze wire (50%).
(b) Copper and Zinc ingots,
(c) Tin ingots (10%)"
A.138
The existing entries may be substituted by the following:—
40
Cols. 1 to 3
1
2
3
4
A. 138 Steel Wire products made of wire finer than No. 16 SWG and/or of special steel suel> as high carbbn/ high tensile, namely, the following:—
A.138.T All others, not specified 1
hcreundcr
60% >
A.138.2. Hand Sewing needles (50% (a) High carbon steel wire. (h) Black needlepapcr gua- ranteed acid free (10%),
(c) Spits (10%).
6 0%
A. 138.3 Gramophone needles
(a) High carbon steel wire. (b) Black needle paper gua- ranteed acid " free (TO%).
(c) Spits (TO%).
may be added:—
"(i) Electro-cast refractories"
B.46.6 and B.46.7 Col. 4.
(PART I—SEC. 1] THE CAZEITE OF INDIA EXTRAORDINARY 93
3. Consequent to the thini and fifth amendments mentioned above, the following change3 muy be made in the Index of the above Red Book:—
(i) The entry "Small and other cutting: tools not elsewhere covered-A.123" appearing on PaRe xxvi of the Index may be amended to reud as follows :•—
"Small and other cutting tools, not elsewhere covered, namely, the following.. . A.123
All others not specified hercunder A.123.1 Bonded abrasives A.123.2",
(ii) The entry "Steel wire products made of wire finer than No. T6 SWG and/or of special steel such us high carbon/high tensile. . . .A.138" appearing on page xxviii of the Index may be amended to read as follows:—
"Steel wire products made of wire finer than No. ifi SWG and/or of special steel such as high carbon/high tensile-, namely, the following A.138. All others, not specified hcreunder... .A.T3S.1. ?Iand Sewing needles. . . . A.13K.2. Gramophone needles. . ,. A.13S.3.
STJBJHCT.—/wpor/ Policy for Registered Exporters for the year April, 1968—March, T969.
No. 31-TC (PNN)f<9.—Attention is invited to die Import Policy for Registered Exporters contained in Vol. II of the Import Trade Control Policy Book (Red Book) for the year April, 1968— March, 1969 issued under the Ministry of Commerce Public Notice No. 5O-ITC(PN)/6K dated April 1, 1968 as amended from time to time-,
2. The following amendments may be made at the appropriate places as indicated below:—
Reference
Amendments
Page No. of the Red Book (Vol. II)
1
2
3
After the existing entry at (d), the following new entries may be added:—
27 A.39
Col. 4
(e) Primary Nickel including Nickel Pellets & squares. (0 Nickel anodes. .(50%), (g) Cadmium anodes. .(50%). (h) Needle files, scraper'filcs. .(1%). CO Cellulose acetate Butyrale moulding-powder. . (2%), Cj) Magnesite bond grinding wheels or rings/cup grinding wheels
20" Dia and above.; abrasive mounted points. .(5%).
The following entries may be inserted in Col. 4 against S. No, A.87.1:—
A.K7.1
33
Col, 4.
[a) Ball, taper and roller bearings (permissible types only). (b) Tool and Alloy steel. (c) Oil seals 0 ° % ). Cd) Iron Cement Ci%)- (e) Chasers, Taps, Dies, Self opening die head, expanding reamers, tap extractors and measuring tools like threading gauges, micro meters, vernier calipers (10%).
94 THE GAZETTE OF INDIA EXTRAORDINARY [PART I—SEC. 1]
I
3
For the existing eemries in Col. 4, the following may be substituted:—
37 A. 109.3
Col. 4.
"(a) Stainless steel shaftings. (b) Seamless steel pipes in s ws of S" or above diani. (c) Copper unwroughi. (d) Tin unwrought. (c) Zinc . unwrought. (0 Lead unwrought. (g) Ball and roller bearings other than banned or restricted type. (h) Alloy Vr-55 (M). (i) Silicon 98-5/99% purily. 0") Silicon liquid.
(k) Injection moulding powder-polypropylene/nylon/Acctal (10%). Cl) Nultacit ZM. (m) Vulkafor EFA and ZDC. (n) Flectal H. Co) Plastic-steel castings, tubes and sleevings. (p) Haste-alloy,
(q) Porcelain combustion tubes, porcelain combustion boats and
three way keys/cocks (10%).
(r) Chasers, taps, dies, self opening die head, expanding reamers, tap extractors and measuring tools like threading gauges, micro meters vernier calipers (10%)."