Subject NOT available

click here for IIIF manifest

REGISTERED No. D-(D)-72

The Gazette of India

EXTRAORDINARY

PART I—Section 1

PUBLISHED BY AUTHORITY

No. 137] NEW DELHI, TUESDAY, JULY 15, 1975/ASADHA 24, 1897

Separate paging is given to this Part in order that it may be filed

as a separate compilation

MINISTRY OF COMMERCE

PUBLIC NOTICE

EXPORT TRADE CONTROL

New Delhi, the 15th July 1975

SUBJECT.—Price Schedules showing F.A.S./F.O.B. prices of different varieties, grades

and qualities of mica and other conditions applicable to their export.

No. 31-ETC(PN)/75.—Attention is invited to Public Notice No. 20-ETC(PN)/74, dated the 27th April, 1974.

2. It has been decided that in supersession of the Schedules of minimum f.a.s./f.o.b. >rices of various varieties of mica in force on the 22nd February, 1974, the minimum f.a.s./f.o.b. prices of different varieties, grades and qualities of mica shall be revised shown in Annexures A to E and their export shall be subject to the conditions shown.

in Annexures F and O with effect from the same date.

3. Export of

(i) Stove plates and discs;

(ii) Punched washer; (iii) Condenser cut plate; and (iv) Other fabricated mica; will however, continue to be permitted only at an f.a.s. price equal to four times the price applicable to the grade and variety of mica used in the manufacture of the exported and product. There will, however, be no premium for thickness in any of these items.

( 873 )

4. This Public Notice will come into force with immediate effect. However, export contracts for processed mica, mica wasteAcrap, mica powder and fabricated mica entered into prior to 15th July, 1975, covered by irrevocable letters of credit opened prior to the 15th July, 1975, and in respect of which shipment was due on or before the date of this Public Notice, shall be allowed to be executed at the floor prices in force prior to 15th July, 1975, provided shipments in respect of such export contracts are completed within sixty days from the date of issue of this Public Notice.

[

AxNtexdRE 'A*

P A R T

Minimum F.A.S. and F.O.B. prices of Mica Blocks (Grades Number 2 and Up including specified patterns)

I

—

CS(M)

F.S.

CL & SS

GSCD

S u e

.

Grade

1

FOB

FOB

FAS

FOB

FAS

FOB

FAS

FAS

]

8 1

2

6

9

3

4

7

5

1

5786-22

10,375-26

7182-87 4485-95

9,281-25

O.O.E.E. Spl.

H E

4788-58

7,182.87

O.E.E. Spi.

3712- 50

5586-68

11,971-46 7,980-97

80,43-75 5=568- 75

6,187-50 5=231-25

5,586- 68

E.E. Spi. . ..

Ex. Spl.

4,021-88

6,747-55 5,187-64

4,190-03

3591-44 2793-35 2194-78

Special

4=331-25 3,248-45 2,629-70

2784-38 2165 63 1701 57

3,990-49

G A Z E T T E

1,176-15

5568-75 4331-25 3403-13 2784-38 2165-63 735-08

4389'54 3591-44 2793-35 948-15

1 . ..

3,093-75 1,764-18

3>39i'93 i;5i7-o6

544 5o

866-12 1,117-17

702-33 57O-67

1,191-11

2 . ..

597-27 77O-39 442-43

2v275-53 i3536-36

O F

I

N D

I

A

STD I

STD 'A'

STD "B'

FOB

FAS

FOB

FOB

FAS

FAS

10

11

12

15

13

14

E X T R A O R D

2CQI•AA

I

2784-38

462896

2593-83

20IO' QS

O.O.E.E. Spl. O.E.E. Spl.

2010-95

3588-75 2939-07

117563

2593-83 T7QO TX

2010-95

I3Q2-20

Q28- 13

I5I6-39 IIQ7'1^

379O-97 2593-83

N A R Y E.E. Spl. Ex. Spl.

1082-82

1546-88

1396-68

68O-63

1237-50

Special

877-91 598-58

464-O7

1 . ..

957-72 421-40

462-83

2 . ..

324-85 2IO-7O

1995-25 1596-19 S96-48 485-02

742-5O 326-7O 224- 63

37603

289-74

251-85 163-35

8 7 5

8 7 6

D.S.

HS

CL I

FOB

FOB

FAS

FOB

FAS

FAS

T H E

1392'20 928-13 618-75 464-07 340-32 170-18

1795•73 1197-15 798-10 598-58 438 96 219-51 149 27

479-16 335-82 O . O . E - E. S pl O . E . E. S pl E . E. S pl E x. S pl Special . . . .. i . . . .. 2 . . . ..

II5-73

959 07 68063 464-07 309-38 216-57 100-43 76- 59

1237-06 877-91 598-58 399-06 279-34 129 54 98-79

61805 433-16

G A Z E T T E

Green BQ or Ruby BQ

Sported I

Green Gi2orRubyAQ

Spotted II

O F

FOB

FAS

FOB

FOB

FAS

FAS

FAS

FOB

I

N D

I

A

2593-83 1516-39

35&S-75 2939-07 2010-95 1546-88

O.O.E.E. Special . O.E.E. Special E.E. Special Ex. Special . Special

123750 368-63 258-30

2010-95 1175-63 928-13 680-63 464-07 210-38 129-33

1197-15 877-9I 598-58 271-36 166 82

438- 96 316-05 280-93 228-27 193-16 136-09 105-36

306-30 217-80 190-58 156-56 129 33 95-30 71-46 1 . .. 2 . ..

395'08 280-93 245-82 201-94 166-82 122-92 92-17

4628-96 3790-97 2593-83 1995-25 1596-19 475-48 333-17

340-32 245-03 217-80 176-97 149'75 105-51 8i-68

E X T R A O K D

I

.1

Red/Copper Std

Red/Copper Std. II

Washed Mica

N A R Y

F OB

FOB

FAS

FAS

FAS

FOB

[

319-24

P A R T

359-16 263-39

I

278-45 204-20 170-18

—

337-99 230-47

219-51 175-59 13969

., 262-04 17868 119-12 O.O.E.E. Special . O.E.E. Special E.E. Special Ex. Special . Speaal

r53"65

S E C

-

70-29 1 . .. 2 . ..

136-13 108-30 71-46 61-28

92-17 79-04

235-Si 199-54 155-66 119-72 79-04 61-47

1

247-50 182-82 I54-7O 120-68 92- 82 61-28 47-66

53'63

9066 69- r^

]

[

J

F.S.

GS(D

CL & SS

GS(M)

P A H T

I

FOB

FOB

FAS

FAS

FOB

FAS

FOB

FAS

—

S E C

.

1

] 657-98 402-69 377-29 275-00 108-60 49-30

560-88 343*34 321-88 234-46 107-92 50-75

407-78 245-23 229-89 168-62 90-04 42-41

248-83 152-24 14^-73 104-68 55.90 26-35

296-91 181-66 170-31 124-91 66-70 21-44 785-I3 480-50 450-20 328-14 129-59 58-83

3 4 5 5i 6 7

335-88 205-52 19266 141-31 75-46 35-54

470-05 287-74 269-75 196-49 90-44 4²-53

T H E

Std I

Std 'B'

Std 'A'

HS

FOB

FOB

FAS

FAS

FAS

FOB

FAS

FOB

G A Z E T T E

O F

11894

I

N D

I

A 211-50 129-41 121-31 88-99 38-02 17-89

252-37 I54-42 144-75 io6-19 45- 31 21-35

79*93 78-50 61-85 20-76 ii-18

141-92 95-38 93-67 73-80 24-77 13-34

6660 45-67 42-81 28-55 10-09 8-26

79-47 54 50 5 1 08 34-07 12-04 9-86 3 4 5 Si 6 7

95-16 66-61 59-46 42-81 14-38 9-59

II3-55 79-48 70-95 51.08 17-16 n-44

Green CL

Green CL I

Green BQ or DS

II or RubyAQ

Ruby BQ

E X T R A O R D

I

FAS

FOB

FAS

FOB

FAS

FOB

FAS

FOB

N A R Y 42-88 25-75 23*59 13-94 3-64 3-19

51-17 30-70 28-15 1663 4-34 3-8i

177-81 119-50 117-39 92-46 33*23 19-74

212-17 142-59 I4O-O7 110-33 39-65 23-55

136-79 9i-9i 90-30 71-13 25-56 15-18

163-22 109-67 107-75 84-87 30-50 i S -n

71-36 49-48 47-58 34-52 12-78 7-20

85-15 59-04 56-77 41-18 15-25 8-59 3 4 5 5i 6 7

8 7 7

                                                                                                                                          8
                                                                                                                                          7
          Spotted I                 Spotted II          Red,'Copper Std.  I        Red  Copper std  n             Washer Mka              8
         FAS        FOB          FAS         FOB            FAS         FOB           FAS         FOB             FAS         FOB
3       47'16       56-27         38-59       46-05        34-32       40-94         25-74       30-71           30-03         35-g3
4       30' 87      36-84         25-73       30-70         20-59       24-57         17-16      20-48           18-02         21-50
5       27-88       33-27         23-59       28-15         19-30       23-03        15-00       17-90           16-53         19-73
5*      1 8 23      21-75         13-94       16 63         1181        14-09          8-58       10-24           8-38         IO-OO      T
         4-80        5'73          3-<54       4-34          2 40        2-86          2-04       2-43            2 - l8        2 60      H
7        3-19        3-8i          3-"9        3"8i                                                               ••                      E

Sp&ififi Sizes

Std

Std I

Std B

GS (M)

FS

A

Grade

G A Z E T T E

FOB

F OB

FAS

FAS

FAS FAS F OB FAS FOB

FOB

O F

I

N D

I

A

74-48 85-40 65-40 53-98

t ,

34-05 27-25 27-25 23-58 21-44 I S - II 17-16 16-20 1 4 19 i j* dia or 38 nun 1 318* dia 01 34-5 mm 7/8' + 1'-5/8' i^-dia or 31 mm 1-1/8* dia or 28-6 nun i^i/r6* dia or 27 mm 1* dia or 25 mm i<;/l6* dia or 24 mm 22 ox 21 mm dia

62-42 54-8i 54-81 44-40 41-21 39-94 38-02 36-01 3I-I5

49-17 47.66 45-37 43-97 37-17

41-88 34-25 34-35 25-56 33-17 21-89 20-76 19-16 15-97

49-97 40-87 40-87 30-50 27-65 26-12 24-77 22-86 19-06

28-54 22-84 22-84 19-76 17-97 15-18 14-38 13-58 11-89

E X T R A O R D

I

Green CL 2 Ruby AQ

Green BQ Ruby BQ

H.S.

FOB

FAS

FAS

FOB

N A R Y

[

. . ..

P A S T

48-14 39-39 39-39 29-40

FOB 57-44 47-00 47*00 35-08

24-75 20-94 2O*94 15-97

29-53 24-99 24-99 19-06

I

—

27-30

32-58

14-38

17- 16

S E C

FAS 20-94 19-04 19*04 15*57 12-99 11-25 9-53 9-53

24-99 22-72 22-72 18-58 15-50 13-4^ u-37 n-37

25-56

30-50

12-78

I5'25

.

1-1/2* d ia or 38 mm 1-3/8* d ia or 3 4 -5 mm 7/8* x 1-5/8- 11/4* d ia or 31 mm . . .. 1-1/8* d ia or 2 8 -6 mm 1-1/16* d ia or 27 mm i*dia or 25 mm . . .. 1 5 / 1 6' d ia or 24 mm 22 mm or 21 mm d ia

H

[

STRSP MICA

P A R T

G.S.I.

CL & SS

F.S.

I Grade

—

FOB

¹

FAS 6

7

FOB S

FAS FOB

2 3

FAS 4

S E C

.

Breadth

Length

1

]

1596-19

..

1' TLT 2' or 25 MM TLT 50 MM

10" TLT 11* or 250 MM TLT 275 MM

D o.

..

I 9 9 5 '²J-

1546-88

-•

••

1546-88

1995'25

T H E 11* TLT 12* or 275 MM TLT 300 MM

D o.

2165-63

2793-35

2165-63

••

2793-35 12" TLT 13" or 300 MM TLT 325 MM

D o.

G A Z E T T E

2784-38

3591-44 2* and up or 50 MM and up 1* TLT 2* or 25 MM TLT 50 MM 2* and up or 50 MM and up 1' TLT 2' or 25 MM TLT 50 MM 2* and up or 50 MM and up

O F

••

2784' 38

3591-44

I 13* TLT 14* or 325 MM TLT 350 MM D.

3712-jo

4788-58

N D

I

A

3712' 50

4783' 58 14" TLT 15* or 350 TLT 275 MM

* •

Do,

4640-63

5985- 74 1* TLT 2' or 25 MM TLT 50 MM 2" and up or 50 MM and up 1' TLT 2* or 25 MM and up 2 'and up or 50 MM and up

E X T R A O R D

I

Specific Sizes

²

N A R Y ¹

3 4 5 6

7

.

•

•

4*X4" 6"x6* 7i*sCir 9* Cir

1546.88 3O93.75 6806-25 9281-25

1995.25 3990-49 8779-07 1197-46

8 7 9

8 8 o

S.T.D. I

C.S.M

S.T.D. 'A'

Grade

F.O.B.

F.A.S.

F.A.S.

F.O.B.

F.A-S.

F.O.B.

1

Breadth

Length

H B

754-22

1257-03

1077-44

974'55

584-73

835-32

I O ' T LT n " or 250 MM TLT 275 MM

Do.

921-83

714-68

1299-38

1676-01

1113-75

1436-57

1" TLT 2." or 25 MM TLT 50 MM 2* and Up or . 50 MM and Up

O A Z M T E

1047- 52 O F 11* TLT 12'or 275 MM TLT 300 MM Do.

1299-38 1786-67

812 12 1136.97

146653

1676-01 ²3O4- 54

111375 I53I-43

I436-57 1975.32

I 1* TLT 2* or 25 MM TLT 50 MM 2' and Up or . 50 MM and Up

N D

I

1786-67

2304-54

1136 97

A

1466'53

1531-43

1975-32

12* TLT 13'or 300 MM TLT 325 MM

1* TLT 2* or 25 MM TLT 50 MM 2" and Up or

Do.

2273-93

1624-23

1949-07

2514-02

2095-02

2933-Q4

SO MM and Up

1* TLT 2." or .

2273-93

1949-07

2933-04

2095 02

1624-23

2514-02

13" TLT 14" or 325 MM TLT 350 MM

E X T R A O R D

I

Do.

2923 60

1949-07

3771-02

3232-31

2514-02

250595

25 MM TLT 50 MM 2" and Up or 50 MM and Up

N A R Y

2923-60

3771 02

1949-07

3232-31

2514-02

25O5-95

14" TLT 15' or 350 MM TLT 375 MM Do.

3202-05

2598-75

4818'52

4130-18

3352-Qi

3735-71

[ 1* TLT 2" or 25 MM TLT 50 MM 2" and Up or 50 MM and Up

P A K T

1714-13

I

Specific Sizes 1328-93 2598-75

3352-01

1139-09 2227- 50

1469-23 2873-15

—

S E C 4 ' x4' 6"x6* 7i" Cir. 9*Cir.

1

]

[

/

CL. I

DS

STD'B1

HS

Grade

P A R T

FAS

F OB

FAS

FOB

FOB

FAS

FOB

FAS

I

—

S E C

Breadth

1

]

1" TUT 2" or

478'86

371-25

309' 38 399'06

••

•-

25 MM TLT

Length 10* TLT I I* or 250 MM TLT 275 MM

Do.

402-20

638 4S

518-78

-•

4?5 °°

T H E

638-48

495-00

402-20 5I8--/8

11" TLT 12 "or 275 MM TLT 300 MM

Do.

678-40

680-63 877 9i 525 95

G A Z E T T E

680-63

678-40

877-91 525-95

O F I2*"TLT 13* or 300 MM TLT 325 MM

I

Do.

1197-15 680-63

928-13

877-91

•-

N D

I

A

680-63 877 91

928-13 H 9 7 I5

I3 " T Lr 14* or 325 MM TLT 350 MM

Do.

928- 13 119715

139220

1795-73

-•

50 MM 2*ard Up or 50 MM and Up 1" TLT 2" or 25 MM TLT 50 MM 2'and Up or 50 MM and Up i" TLT 2" or 25 MM TLT 50 MM 2s and Up or 1 50 MM and Up i" TLT 2-or 25 MM TLT 50 MM 2" and Up or 50 MM and Up

1795-73 928-13

1392 20

1197-15

E X T R A O R D

I i*TLT2*or 25MMTLT 50 MM

14" TLT 15" or 350 MM TLT 375 MM

Do.

2" and Up or

1856 25 2394-29 1392-20 1795-73

• •

Sizes

Specific .

50 MM and Up

N A R Y

••

4*M* 6"x6- TpCir 9'Cir

8 8 1

8 8 2

Spotted I

Grade

Green CL or

Ruby 'AQ>

Green BQ Ruby 'BQ*

FAS FOB

FOB

FAS

FAS FOB

Breadth

Length

T H E

478-86

371-25

IO*TLT I I" or

1* T LT 2* or

835'32 1077-44

MM

25 MM T LT 50

250 MM TLT 275MM

Do.

495-00 638-48

IH3-75 U3<5- 57

and Up or MM and Up

2' 50

495-00 638- 48

13* or

T LT 2" or

1436-57

IH3-75

G A Z E T T E

MM

T LT 300 MM

MM T LT 50

1" 25

n ' T LT 275 MM

680-63

D o.

and Up or *

1975-32

877-9i

1531-43

O F

MM and Up

I

877-91

I975-32

1531-43

680-63

13' or *

N D

MM

MM

T LT 2" or MM T LT 50

I 12* TLT 300 MM T LT 325

A

2514-02

1949-07

D o.

928-13

and Up or

1197-15

MM and Up

2* 50 I ' 25 2* 50

2514-02

928-13

1197-15

I949-O7

MM

MM

T LT 2* or MM T LT 50

13 • T LT 325 MM

14" or T LT 350

1392-20

Do.

and Up or

I795¹73

3232- 31

25O5-95

• •

MM and Up

I* 25 2" 5°

E X T R A O R D

I

1392- 20

T LT 2* or

15* or

3232-3I

2505-95

1795-73

MM

MM

MM T LT 50

14" T LT 350 MM T LT 375

I* 25

1856-25 2394-29

N A R Y and Up or

De.l

4128-35

3200-63

* * • > 2* 5°

[

SPECIFIC SIZES

MM and up 1

1139-07 1469-23

A'M"

P A R T

2228'00

2873-79

6"x6'

I

—

?i"Cir

••

••

• •

••

••

S E C

.

9' Cir

••

••

••

••

I I

Spotted II

                                              Red/        Red/        Washcc
Grade                                         Copper      Copper      Mica
                                              Std. I      Std. II

FAS FOB

FAS FOB

FAS FOB FAS FOB

Length

Breadth

10* TLT 11" or

250 MM TLT 375 MM

1" TLT 2" or - 25 MM TLT TLT 50 MM

Do.

2" and Up or

50 MM and Up

11* TLT 12" or 1* TLT 2* or

..

275 MM TLT 300 MM

25 MM TLT 50 MM

Do.

2" and Up or

50 MM and Up

12" TLT 13" or 1" TLT 2" or

..

300 MM TLT 325 MM

25 MM TLT 50 MM

Do.

2" and Up or

..

50 MM and Up

13" TLT 14* or l" TLT 2" or

325 MM TLT 350 MM

25 MM TLT 50 MM

Do.

2" ard Up or

jo MM and Up

1" TLT 2'or

14' TLT is'or

350 MM'TLT 375 MM

25 MM TLT 50 MM

Do.

2" and Up or

50 MM and Up

SPECIFIC SIZES

4*x4'

6'x6"

7V Cir

9" Cir

NOTE.—For mica strips 15" and longer in widths of 1" TLT 2" and 2" and up ther prices are left to be settled between buyers and sellers provided however, that these prices shall not be less than 20 per cent more than the respective prices fixed for strip mica in lengths of 14" TLT 15" for trvery 1" gap. (Example : For 15" TLT 16" price shall be of 14" TLT 15" plus 20 per cent and for 16" TLT 17" price shall be of 15" TLT 16" plus 20 per cent and so on).

(A) SPECIAL ADDITIONS TO MINIMUM F.A.S, PRICES FOR BLOCKS BASED ON THICKNESS. THE NORMAL THICKNESS OF BLOCK MICA IS 7 MILS AND ABOVE

1. Orders requiring supply of Block Mica in thickness 10 mils and abovc )5 per cent additional premium of the pries of the grade and quality required in addition to the- minimum F.A.S. price of the grade and quality shall be charged.

2. For orders requiring supply of Block Mica Split and gauged accurately in one mil thickness range (such aa 7-8, 8-9, 9-10, 10-11, or 0.175-0.20, 0.2 to 0.225, 0.225 to 0.25 the minimum F.A.S. price for such Block Mica shall be 40 per cent higher than the minimum F.A.S. price of the grade and quality required to be supplied PROVIDED that order is placed in at least 4 consecutive thicknesses and provided that Order tor one thickness shall not exceed 40 per cent of the total order. In case an order is placed for less than 4 consecutive thickness, the price shall be 50 per cent higher than the minimum F.A.S. price of the grade and quality to be supplied, subject to the limitation provided in para 3(a) below, relating to orders for one or two ONE mil range split and gauged Mica Blocks.

3. For orders requiring supply of Block Mica Split and gauged accurately in 2 mils or 3 mils thickness ranges, the minimum F.A.S. price shall be calculated on the following basis :—

(a) For orders in 3 or more 2 mil or 3 mil-ranges (such us 7—9, 8—10, 10—12, 12—15 mils or 0.2-0.25-0.3 mm etc), 30 per cent higher than the minimum F.A.S. price of the grade provided that such order for no one thickness shall exceed 50 per cent of the total order.

(b) For orders in TWO 2 or 3 mil ranges only—40 per cent higher than the minimum F.A.S, price of the grade provided that in such case Order for no one thickness shall exceed 50 per cent of the total order.

(c) For orders in only ONE one or two mil range of thickness (E.G. 7—9, 8—10, 9—11, 10—12, or 8-9, 9-10 etc.), 75 per cent higher than the minimum F.A.S. price.

(d) For orders in only one three mil range of thickness such as 7—10, or 9—12, 11—14, etc., the F.A.9. price for such split and gauged mica shall be 50 per cent higher than the F.A.S. price of the grade 6, 40 per cent higher of the Grade Si and 30 per cent higher of the grade 5 and above.

4. For orders requiring supply of Block Mica Split and gauged correctly in 4 mil range of thickness such as 8—12 or 12—16 ma or 0.2-0.3, 0.3-0.4 mm etc., the minimum F.A.S. price for such shall be calculated as follows:—

(a) For order in only ONE such 4 or 5 mil range 25 per cent higher than tho floor price of the grade.

(b) For orders in TWO such 4 mil and or 5 mil range 15 per cent higher than the floor price of the grade.

If an order is placed for supply of mica split and gauged in a series of two or more thickness, with a minimum jump of at least 2 or more mils in a continuous thickness, ranging from 6 mils and upwards up to including 15 mils, the floor price for such mica shall be 15 per cent higher than the floor price of the grade and quality to which the mica belongs, provided that order for one thickness range shall not exceed 40 per cent, nor shall be less than 20 per cent of 6 to 8 mils or 6 to 9 mils range. Provided further that against each delivery, in case of partial shipment of such order, there must be proportionate shipment of the order In all thickness ranges as far as possible.

5. The premium based on thickness of block mica mentioned above will be further increased by the following percentages :—

Grades sJ

4°%

Grade?

30%

Grade 4 and up

²5%

NOTE.—1 These pretnia shall not apply to mica below—7 mils except in case where an order is placed for mica In thickness of 6 mils in conjunction with mica of higher thickness as per para 5.

2, US per cent of the supply must conform to the special range/ranges of

thickness.

[PART I—SEC. 1] THE GAZETTE OF INDIA EXTRAORDINARY 885

(BK SPECIAL ADDITIONAL PRICES FOR BLOCK MICA SELECTED TO CUT SPECIFIED PATTERNS

NOTF..—These additional arc applicable only to BLOCK MICA in all qualities for grudes No. 5 and up.

Normal Square inch area of Block Mica

Grade D-signaiion

Area in meiric system

Area in sq. inches

(Sq. cm)

O.O.E.E. Special O.E.E. Special E E. Special E. Special Special

100 and above 80 T LT 100 60 T LT 80 48 T LT 60 36 T LT 48 24 T LT 36 15 T LT 24 10 TLT 15 6 T LT 10 3 T LT 6 2} T LT 3 1 T LT %\ 0 • 75 T LT 1

645 • 2 ar d above 516-1 T LT 645-2 382-1 T LT 5i6-i 309'7 T LT 382-1 2323 TLT 309'7 154-8 TLT 232'3 96-8 T LT T54-8 64-5 TLT 96'8 38-7 T LT 64-5 1 94 T LT 38- 7 14-5 TLT 19-4 6-4 TLT r4 5 48 T L T 64

1 2 3 4 5 51/2 6 7

Nora—For qualities of Block Mica of heavy stained and up, the sizes of grade No. 6- will be upto less than 1-3/8" dia. (or its equivalent in metric system). For price calculation of areas falling between 1.5 to less than 2.2 sq. inches for these qualities, reference may be made to para (c) below, (a) All orders of SELECTED-TO-CUT MICA BLOCKS of which the square inch areas (or its equivalent in the metric system) fall within the lower half of the square inch area of the grade shall be charged minimum F.A.S, price for th" next higher grade.

Example.—STC 2" x 3£" makes an area of 7 sq. inches or its equivalent in metric system. This falls within the lower half of the sq. inch area of grade 4. The price for this size of selected-To Cut Pattern will be price of E™de 3 of the quality asked for.

(b) AJ1 orders for SELECTED TO CUT MICA BLOCKS of which the square inch are;i (or its equivalent in the metric system) fall within the upper half of the square inch area of the grade shall be charged minimum F.A.S, price for the next higher grade plus 20 per cent.

Example.—STC 3" x 3" makes an area of 9 sq. inches. This is also in Grade 4 but the area of this Selected-To-Cut Pattern falls within the upper half of Grade 4 i.e above 8 sq. inches. The price of this size of Selected-To-Cut Block Mica shall be the price of Grade 3 plus 20 per cent of Grade 3 of the- quality called for.

(c) 0) STC Mica Blocks of either circular or The price of the pattern will be the price of rectangular pattern of which ihe tq. inch grede 5 of the qualny of Bkck plus area in from 2-2 sq. inch or (15-48 sq. cm) i c % ol the seme, to less than 3 sq. inch (or T9-35 sq. cm)

(ii) Basis of calculation of mirimum price for Price of grae'e 6 of tie quality to which STC Blocks of which the sq. irch area it bdergs plus ic% of the pnee ot is between 1 sq. irch (or 6-45 sq. cm) to grG^e 6 less than 2.2 sq. inch (or 14-48 sq. cm) except for STC sizes, for which separate PLUS . prices have been laid down in the Trade 10 per cert for every o- r (i/io sq. ircrO area in excess ever 1 sq. inch area upto Notification. 5 decimal points (0-5) and 15% For above 0-5 sq. inches.

Jixample (0 :Ordet for STC i* x i j* in STL. I quality: The price will be as follows: Rs. P.

(a) Price of STC. i No. 6

20-76

2-08

(b) 10 percent extra (c) 10 percent extra for each 0.1 sq. inch

excess over 1 sq. inch upto 5 points (0-5) and above 5 poj-ta (0-5) the rate will be 15% . The area is r-5 sq. inch, thus excess is o- 3 sq. nch i.e. Rs. 2-076x5

io-38

In random thiefcr ess per Kg. Rs. 33 • 22,

Example (ii) : Order for STG i*x2* in STD. 1 quality:

'The price will be as follows:—

Rs. P. 20 • 76 2-08

(a) Price of STD. r No. 6 (b) 10 percent extra (c) 10 percent extra for first 5 points (for o- 5),

i.e. 5x2-076

10-38

(d) 15 percent extra for the second 3 points

(foranother O'3) i . e . , 5 x 3 ' it

J5'55

In random thickness per Kg. Rs. 48-77

(a) The price chargeable for any STC x size, intermediary to the specified patterns, such as H", 1-3/8", etc. shall be price for the larger of the two as within which it lies.

(b) Shipments of a general grade of No. 7 must contain reasonable proportion of all patterns comprised in the grade and any shipment containing more than 40 per cent of only one size as 22mm. dia and or larger not be considered as a general grade of No. 7. Those restrictions of sizes will not apply to No. 7 Blocks of qualities below STD 'B'.

Explanatory Notes on Block Mica Minimum F.A.S. Price Fixation.

1. The STANDARD PHYSICAL MASTER SAMPLES prepared by the erstwhile Mica Export Promotion Council in consultation with the Mica Trade represents all the qualities characteristics except "Waviness". The factor of waviness varies from country to country jaud even from consumer to consumer in the same country. The degree of Flatness required also varies from application to application. In the light of the above, factor of "Waviness" Is left open to be decided between buyer and seller.

NOTE.—The "approved sample" may be in any of the following forms:—

(i) the sample approved by the foreign buyer and carrying his seal and signature in token thereof,

(ii) the sample jointly sealed by the Export Inspection Agency and the exporter, the replica of which has been sent to the foreign buyer and duly approved by him;

(iii) the sample, submitted by the exporter declaring it as an approved sample of the buyer.

2. All micas from 2 mils and above to less than 7 mils in the Stained A, G.S. (M) and better qualities shall be called thin blocks or thins. They shall be allowed to be exported if their pricse are atleast equal to the price of 3rd quality Condenser Films, in the case of 'Stained A quality, the price of 2nd quality Condenser Films in the case of O.S. (M) quality and the price of 1st quality Condenser Films in the case of G.S. or higher qualities.

3. All micas in qualities from Stained I and down in thickness below 7 mils shall bo allowed to be exported at prices 25 per cent less than Block Mica Prices. These may be described as thins or Cleanings.

4. For the purpose of calculating the prices of Circular STC Blocks, e.g., 4" circlesi •etc. the total area of the circle shall be calculated in sq. inches or sq. cms. The floor •price and premium for such circular blocks shall be calculated on the basis of the "I-

iafh area, as provided for other rectangular blocks. This basis of calculation will not apply to thos" circular STC sizes for which prices have been fixed.

5. Any mica block that is soft and heavily mudstained with smoky stains and is also cross grained, which is lower in quality than spotted II shall be allowed to be shipped as Red/Copper Stained I or II or at a price between the two as the buyers and sellers may have agreed upon.

6. Orders placed with code words, such as V-l, V-2, V-3 etc. shall also contain against •each such item the corresponding quality descriptions as specified in Government Press Note to facilitate correct assessment of the qualities during preshipment inspections.

A N N E S O RE ' B '

8 8 8

Minimum FAS and FOB prices for Indian Condenser Films

Green Condenser Films

Ruby Condenser Films

First

Second

Second

Q

Q

First

Q

Third

Third Grade

Q

Q

1 Q

FAS

FOB

FAS

FOB

FAS

FOB FOB

FOB FAS FAS

FAS

FOB

T R E

487- 03

264-68 628-20

i

424-03

628-20 546-94

4"7-03 424-03

2

264-68 213- 46 168-71

355*74 296-45 236-81

330-55 276- 30

546-94 394-42 329-69 197-36

G A Z E T T E

355- 74 296-45 236-81 157-89 110*52

458- 85 382-38 282-57 188-40 131-88

394-42 263-74 188-40

341-40 275-33 201-31 135-^5 roi-74

O F

341-40 275-33 201" 31 169-56 127"l6 98-91

142- 10 106- 57 82-89

213-46 168-71 113-68 85-26 66-32

83-68

I 138-15 104-61 59-21

458-85 382-38 282-57 235- 50 164-85 124-82 70-65

330" 55 221-03 157-89 126- 31 69-47

150- 72 82-89

99-85 56-51

197- 36 I57¹ 89 86' 83

235- 5O 188-40 103-61

3 4 5 51 6

56-51

47-36

79-14 45-22

47-36

37-9O

N D

I

A

E X T R A O R D

I

N A R Y

[

P A R T

I -

S E C

SPECIAL ADDITIONS TO MINIMUM F.A S. PRICES FOR CONDENSER FILMS SELECTED TO CUT PARTICULARS OR SPECIFIED PATThRNS.

The minimum F.A.S. prices for Condenser Films Selected-to-cut specified patterns shall be calculated on the following basis:—

Area of Pattern

1. Less than 1-5 sq.inches 01 967 sq. mm.

Minus l'.A-S. lJj.ice Additions

40% higher Thar. *.l"c piice of No. 6 Conden- ser Films.

The bame as the price of No. 5-J Con- 2. 1-5 sq. inches to less than 2 sq. inches or

957 sq. mm. to less, than 1290 sq mm.

denser Films.

10% highci than tl e puce cf No. 5 Con_ 3. 2 sq. inches to less than 3 sq. inches or 1290

sq. mm. to less than 1935 sq, pirn.

denser Films.

25% higher than the price of No. 5 Con- 4. 3 sq. inches to less than 3-5 sq. inches or 1935

t>q. u p. to less than 2257 sq. mm.

denser Films.

The same as the puce of No. 4 Ccrc'eri^er 5. 3' 5 sq- inches to less than 5 sq. inches or 2257

sq. mm- to less than 3225 sq. mm.

Films.

30% higher than the price of No. 4 Con- 6. 5 sq. inches to less than 7- 5 sq, inches or 3225

sq. mm. to less than 4837 sq. mm.

denser Films.

NOTE — 1. In deliveries of STC Films, there may be oversize up to 30 per cent of the

bulk.

2. If the contract requires a cutting margin of 3 mm., the F.A.S. price should be worked out by taking the total area of the condenser film into

account.

3. Condenser Films of quality lower than "Third Quality" shall be allowed to be exported at prices mutually agreed upon between buyer and seller pro- vided the deliveries of such lower quality do not contain more than 15 per cent of Third Quality" condenser films.

Clarifications :

Condenser Mica Films

1. Rxport of Condenser Films STC between 7.5 sq. inches to less than 10 sq. inches in area for which no premiums have been fixed shall be allowed to be shipped at a price of grade 2. . In a delivery of No. 4 Condenser Rims, upto maximum 30% of No. 3 Condenser Films may be allowed to be shipped and similarly in a shipment of No. 3 Condenser FJ ms a maxi- mum of 30% of No. 2 Condenser Film* may be allowed to be shipped. Similarly in No. 2, 30% of No. 1 may be allowed.

3. Any delivery of Condenser Films containing less than 25% pieces with slight air stains, jittered over not more than half of the usable area of a piece will be considered as first quality Condenser Films.

4. Orders for Condenwr Films with code words such aftV-i.V-a, V-3 etc. shall also " ^p against each such items, thecoiresponding quality description as specified m Uie ^v"™ ment Press Note to facilitate correct a&sespment of the quality durinf preshipmcrt inspection.

ANNEXURE 'C

8 9 0

Mmimum FAS and FOB prices of Mica Splittings

Grade

Area in Sq. inchw

Russian Grade

Spotted BF II

BF I

Spotted

Red^ Copper

Std. BF

Bookfotm 1st Qty.

BookfortB

2nd Qty.

FOB

FAS

FOB

FOB FAS

FOB FAS

FAS

FAS

FOB

i 24 TLT 36

266-42

T99-S2

••

••

317-90

23<-43 -•

••

••

I55US4-8TLT 232' 3 Sq. an.)

T H E G A Z E T T E

2 15 TLT 24

166-51

I9S-69

I46-53

174- "4

97 (96-8TLT

154-8 Sq. cm.)

O P

56-04

66-87

I

79-58

52-54

10 TLT 15

113-24

126' 56

135-12

66-69

44-03

151-02

3

65 (64' 5 TLT 96-8 Sq. an.)

N D

I

A Top 7J TLT

127-18

I43'O6

106-58

•• 4

. 119-89

• • ••

••

••

10

50 (50 TLT

54" 5 sq- cm-)

48-66

48-02

57-30

40-78

70-04

6 TLT 10

58-70

. 113-24

135-12

4

115-34

9658

40 (38- 7 TLT

64' 5 s

4j TLT 6

96-58 115-24 83- 25

••

99-34

4i

••

30 (30 T LT

38- 7 sq. an.)

E X T R A O R D

I

39-8"

40-02

48-02

33-37 3 TLT 6 " .

47-75 5

57'3O

87' 42

86-59 103-32 7 3 -^

20 (20 TLT

30 gq. cm.)

N A R Y

Top 2j TLT 3

51

••

71*52

•-

••

••

• 69-93 "3'44 59'94

[ 15 (14-5 TLT 19*4 "1- an-)

24-69

20-69

ij TLT 3

59*to

26' 69

P A H T

34'69

31-85

4"-39

4*'#5

• 59-94 71-52

51

10 (10 TLT

19-4 sq. cm.)

1

-

S

14-68

20-69

I7'52

ao-o2

6 1 TLT 1*

30-01

*3'89

ITU

35-81

. 3"-65 43-73

f c c

.

7 (6-4 TLT

10 sq. cm.)

\

1 1

LOOSE SPLITTINGS

E? 3

C3cai Dust Loose 1st Quality

Dusted OF Undusted

Red/Copper Std.

Spotted I loose

Spotted II loose

loose

loose

I

p

i-t

FOB

FAS

FOB FAS

FAS FOB

FOB

FOB FAS

FAS

W

I

149-05

124-91

• •

2

..

99-92

119*23

• •

40-03

..

66-6o

3

79-47

--

34-03 4O-93

47*77

£N

73-80

61-85

Top

4

68-13

38-66

26-88

82*32 57-09

32-40

22-53 68-99

24-78 39-57

4

73-So

47*58

-

• • 61-85

56'77

4i

20-48

62-44 42-81 51-08

17-16

19-06

52-33

24* ft 29-57

22-74

5

15-24

20-78

18-15

Top

17-45

51

S >

6-65

25-98

22-69

15-13

to-16

I-00 9-16

H-63

5-81

I7'33

5i

g

3-30

10-40

..

7-31

9 0B

6

6-oi

3-78

8-37

5'25

••

I

oo

F.A-S. F.O.B.

No. 6 1st loose ipliiting.^

9-10

7-95

No. 6 Inter loose splitting:,

7-80

6-8i

No. 6 Ilnd loose splittii gs

6-51

5-69

No. 6 Illrd loose s>plittu g

5-2r

4 55

No. 6 Cheap loose spliitirgt;

2 19

1 9i

No. 6 Stained loose spirting.

7 - IT

6-21

No. 6 Spotted cheap loose >plitl'rf,^

i-74

I' _"

No. 6 1st oidiiuiy spotted loose <-plmirg>

6-Co

6-87

No. 6 2nd or.Ii smy spotted looic iplitungs

5'4S

4-79

No. 6 3rd ordii'Hiy spotted looic spli'dngs.

3.30

2-fi8

No. 4 & 5 Mixed turn loose spliui: gs

31-80

26-65

No. 5 & 5i Mixed turn loose splitgrgj;

14-93

13-04

No. 5i & 6 Mixed turn loose s-pliltings

<>• 05

6-93 !

NOTE.—(1) All Bookform Splittings, specified above shall include (1) Ruby Bookfonh or Book-packed Splittings, (2) Ruby Clear Bookform or Bookpacked Splittings (3) Green Bookform or Bookpacked Splittings, and (4) Green Clear Bookform or Bookpacked Splittings,

(2) All Loose Splittings specified above shall include (1) Ruby Loose Splittings, (2) Ruby Clear Loose Splittings (3) Clear Loose Splittings, (4) Green Lo*se Splittings, and (5) Green CleHr Loose Splittings,

(3) Si will be from 2 sq. inches to less than 3 sq¹. inches. If any buyer wishes to have a supply in size not less than 2i sq. inches he will pay 20 per cent more.

(4) No. 6 stained Loose splittings must contain at least 70 per cent to 75 per cent of films that are stained.

(5) la all Spotted Bookform oj Loose Splittings, the proportion of spotted and non-apotted Splittings (Heavily stained and Densely stained) shall be as follow*:— (a) In Grade 5J and above, the proportion of Spotted Splittings will be at least 75 per cent and that of Non-spotted Clear splittings at the most 25 per cent.

(b) In Grade 6, the proportion of Spotted Splittings must be at least 60 per oent and that of Clear Non-spotted Splittings at the most, 40 per cent,

(6) In the mixed Ordinary Loose Splittings, 25 per cent of undersized material will be permitted.

Additional Specifications for bookform and Loose splittings Re. V. Cuts or Cracks :

V. Cuti or Cracks in Bookform or Loose Mica Splittings which do not exceed in lengtb or depth as specified below shall not be treated as V. Cuts or Cracks :

i" or 12,7 mm Grade 4, 3/8" or 9.64 mm in Grade S and J" or 6.35 mm in Grades 5i and 6.

Premium Chargeable on Bookform and Loose Splittings

[PART I—SEC. 1] THE GAZETTE OF INDIA "EXTRAORDINARY 893

minimum F.A.S. price of the grade in addition to the minimum F.A.S. price of the grade.

2. Buyers requiring No. 5 Bookiorm Splittings fiom 3J to leas than 6 sq. inches (the normal grading being 3 to 6 sq. inches) shall have to pay the price of grade 4i Bookform Splittings; in a normal delivery of No. 5 Bookform Splittings there shall be at least 20 per cent books between 3 to less than 3i sq. inches.

Premiums chargeable for special thickness in Bookform or Loose Splittings

The normal average thickness of Bookform Splittings or Loose Splittings grade 5J and up shall be from 6 to 9i mils or 0.15—0.225 mm for 10 splittings. The thickness of 10 splittings shall be measured with the help of Screw Gauge Micrometer.

1. The Bookform Splittings or Loose Splittings required to he supplied in a special range of thickness such as 4 to J mil or 12 to 18 microns per single splittings a premium of 10 per cent over the minimum P.A.S. price of the grade required shall be charged for covering extra wastage and labour charges.

2. In case of loose Mica Splittings of Grade 5 and above, if the Splittings are required to be supplied in special thickness range, such as $ to 12 mils or 30 microns for each splitting a premium of 10 per cent shall be charged in addition to the minimum FAS price of the grade required.

WRAPPER MICA

NOTE.—The Export of Wrapper Mica (Bookform Splittings Split in thickness i to 1.2 mils or 18 to 30 microns) shall be allowed at prices 25 per cent higher than that of 1st quality bookiorm Splittings to respective sizes.

(a) Basic price of Warpper Mica.—25 per cent higher than the F.A.S. price of First Quality Bookform Splittings of the grade to which tht wraper Mica belong"; on the basis of square inches area.

1. Stained 'A' Wrapper Mica at the price of 3rd Quality Condenser Films.

2. G.S. (M) Wrapper Mica at the price of 2nd quality Condenser Films.

3. G.S. (ISI) or better Wrapper Mica at tho price of 1st quality Condenser Films. In case of selected to-cut speciged size or patterns, prices will bear same premium as STC Condenser Films.

ANNEXUHE ' D'ANNEXUHE ' D'

Minimum F.A.S.jF.O.B. Prices for Mica Scrap & Waste & Factory

Cuttings

(In Rs. per M. Ton)

Description F.A.S. F.O.B.

1. Mica Scrap or Waster

2. Factory Cuttings of Mica 990- 00 1372 6T

2400-00 3327*53

ANNEXUKE 'E'

Minimum F.A.S.JF.O. B. prices for Mica Powder

Mica Powder

(In Ri. per M. Ton)

F.A-S. F.O.B.

144°-°° 1440-00

ANNEXURE 'F

OTHER CONDITIONS FOR EXPORT OF PROCESSED MICA

Any shipment of mica of any variety other than 'Fabricated Mica' will be permitted only if irrevocable letter of credit to the extent of 100 per cent of the invoice value of the goods (which will included the export duty) has been opened in favour of the exporters To facilitate settlement of claims as between the foreign buyers and exporters, the follow- ing arrangements wUl continue to be in force:—

(a) While the foreign buyer will open irrevocable letter of credit in a Bank in India for 100 per cent of the invoice value (which will include the export duty), the letter of credit should include a special stipulation that not more than 95 per cent of the amount will initially be payable to the exporter and the balance (of 5 per cent) will continue to be held (in the bank in India) for a period not exceeding six months from the date of shipment, within which the said balance would remain available for settlement 6f any claims arising.

(b) Any claim, arising from, causes other than the question of quality including size (that is, from causes such as short weight, breakage, pilferage, penalty for late shipment etc.) as are raised by the buyer, and admitted by the exporter, will (upto a limit of 2 per cent of the invoice value) be allowed to be adjust- ed in favour of the buyer by the Reserve Bank of India, against the afore- said balance of 5 per cent on application being made by the exporter. Such application should indicate:

(I) Name and address of the exporter.

(ii) Name and address of the claimant (foreign buyer).

(iii) Number of the G.R/E.P./P.P. form on which the export was declared;

(iv> Invoice value of the goods exported supported by a certificate in original from the authorised dealer through whom the proceeds have been realised to the effect that the full export proceeds have been received in India in an ap- proved manner.

(v) Grounds on which claim has been made.

(vijf Amount for which claim is proposed to be settled (supported by the original Debit note, if any received from the claimant).

(vii) Basis on which the amount of the proposed settlement Is calculated, supported by the original Sale Contracts as well as Survey/Tnspection/Analysis Weight Report (whichever is relevant to the type of claim) or in the case of penalty claims for late shipment, copy of the related Bill of Lading; and

(viii) A brief history stating the circumstances in which the claim has arisen and enclosing the original correspondence exchanged by the exporters with the parties concerned regarding the claim.

(e) This application should include a formal declaration by the exporter that the particulars given by him are correct and conforming that the exporter has not already paid the claim or adjusted it in any other manner.

(d) In case the exporter is unable to produce any of the requisite documents, he may explain suitable, reasons for his inability to do so and enclose a recommendation from the Export Inspection Council in support of his claim, such recommendation will not be required where the requisite documents are produced by the exporter.

(c) Claims ari"iag from the above mentioned cause but of a higher value than 2 per cent of the consignment value or arising on account of the quality of mica (including size) should be preferred before, and will be adjudged by a special Panel being constituted by the Indian Council of Arbitration details in regard to the Penal have been announced separately. The application of the exporter in regard to such claims should apart from the same details and documents as mentioned above, be supported in addition by the said Panel's award in original (with a certified copy thereof); if the application is documented in this manner, the adjustments/remittance' required to settle the claim will be allowed by the Reserve Bank of India.

ANNEXURE 'G'

FABRICATED MICA

Shipments of fabricated mica i.e. cut mica blocks and condenser films accurately gauged, cut plates, punched backing plates or backers, punched bridges, spacers, trimmers, transistor plates, or transistor pads, washers and discs and all varieties of mica cut or punched to specified shapes and sizes, macanite, built-up mica, tapes, mica tapes, mica cloth, mica silk, mica paper, mica folium will be permitted only if irrevocable letter of credit to the extent of 100 per cent of the invoice value of goods (which will include export duty) at sight draft or with 30 day* sight draft has been opened in favour of the exporter.

B. D. KUMAR,

Chief Controller of Imports and Exports.