Subject NOT available

click here for IIIF manifest

REGISTERED No. D. (D.)-72

The Gazette of India

EXTRAORDINARY

PART I—Section 1

PUBLISHED BY AUTHORITY

No. 72] NEW DELHI, MONDAY, APRIL 21, 1980/VAISAKHA 1, 1902

Separate paging is given to this Part in order that it may be filed as a separate compilation

72GI/80-1

(329)

MINISTRY OF COMMERCE & CIVIL SUPPLIES

(Department of Commerce)

IMPORT TRADE CONTROL

PUBLIC NOTICE No. 12-ITC (pN)/80

New Delhi, the 21st April, 1980

Subject : Import Policy for April 1980—March 198],

File N. IPC/3/9/80.—Attention is invited to the import policy for April 1980—March 1981, published under the Department of Commerce Public Notice No. 9-ITCfPN)/80 dated the 15th April, 1980.

SI. No.

13. 87

The following shall be added

Appendix 5, Entry No. 385

as the end :—

"other than those included in Page Number of Import Policy, 1980-81

Appendix 3"

14. 87

(3)

{{^{{FOOTNOTE (4)}}}}

> (2)

Appendix 5, Entry No. 390

1. 1'

The figure "40" in the existing description shall be read as "100"

15. 96 Appendix 8, Entry No. 28

1 Chapter 12, Para 76(1), 17th and 18th lines.

At the end of the second line, the word "fltbre" shall, read as '"fibre" For the words "regional licen- sing authorities concerned" read "Chief Controller of Imports and Exports, New Delhi".

16. 97

32

2.

Appendix 8, Entry No. 52(c)

The figure "22' in the existing description shall read as "20" ! Chapter 17, Para 159.

97

17.

Appendix 8, Entry No. 58

For the existing heading of this para viz. "Export Pro- motion Officers Committee" read "Relaxation of Policy"-

The word "less" at the end of the existing desciiption shall be read as "above"

3. 40

18. 101

For the existing description read "Iron powders".

Appendix 10, Entry No. 18

i Chapter 20, Paia 199(2) (H)(f)

The existing description of the item shall be substituted by the following:—

For the word "Meteorology"

49

4.

in the heading read "Metrology".

Appendix 2, Part 'A¹, main item No. 2.

The existing description shall

64

5.

be read as

Appendix 3, Entry No. 326

"Aluminium foil (plain)/lami- nated/prlnted/coloured (but- not etched or formed alu- minium foils)—used as raw material or as packing ma- terial".

204

19.

"Mixtures of odoriferous substances/mixtures of resi- noids".

Appendix 26, EntiyNo. 57

Appendix 3.

67

6.

For the existing description, read "polyester film plain/me- tallised except metallised film below 6 microns used in the electronics industrv." After the existing entry No. 560, the following new entry shall be inserted :—

3. Annexure I to Appendix 19 in the import policy 1980-81 (pages 170-179) reproduces the Notification dated 9th June 1978 issued by the Department of Revenue regarding Duty Exemption Scheme. The following amendments shall be made therein as notified by the Department of Revenue vide Notication No. 76/F. No. 602/2/79-DBK dated the 15th April, 1980:—

(i) In clause (c), the words "subsequent to the grant of the

said Certificate", shall be omitted.

(ii) The entries In the first Schedule shall be substituted b; the entries given in the Appendix to this Public Notice "560-A. Ball Bearings SKF Nos. 6200, 6201, 6202 and 6203, and equivalent, including their variations such as (a) a groove in the outer ring with or without loose ring In the groove, or (b) a dust shield or plate.on one or both sides of the Bearings or (c) any combinations of (a) & (b)".

Appendix 3.

68

7.

C. Yenkataraman, Chief Controller of Imports & Exports

APPENDIX TO ITC PUBLIC NOTICE No. 12-ITC(PN)/80.

After the existing entry No. 569, the following shall be in- serted :—

Dt. : 21-4-1980

ANNEXURE I TO APPENDIX 19

Department of Revenue Notification No. 76/F. No. 602/2/79- "569-A. Bright Steel Rounds of non-cobalt bearing high speed steel 5mm to 100mm dia in any finish".

DBK. dated, the 15th April, 1980)

The words "those used In"

71

8.

"THE FIRST SCHEDULE"

shall be deleted.

Description of the goods

Appendix 3, Entry No. 663(17) (H), seventh line.

s.

No

71

The word "those " shall be

9.

Heading No. of the First Schedule tc the Customs Tarifl Act, 1975.

deleted.

(3)

(2)

{{^{{FOOTNOTE (1)}}}}

Appendix 3, Entry No. 663(17)(ii>), third line.

12.07

1.

71

10.

After the word "components" the following shall be added: ''and their functional equiva-

Appendix 3, Entry No. 663(23), Heading.

lents"

81

1.

Plantsjand parts (including seeds^and fruit) of trees, bushes shrubs or other plants, being goods of a kind used primarily in perfumery, in pharmacy, or for insecticidal, fungicidal or simi- lar purposes, fresh, dried, whole, cut, crushed, ground or powdered.

The figure "1.8" shall be read as "1.2"

Appendix 5, Entry No. 10

. Fats of bovine cattle, sheep or goats, unrendercd; rendered or uolvent- cxtracted fats (including "primier jus") obtained from those unrendercd fats. Fats and oils, offish and marine mammals, whether or not refined. Fatty acids ; acid oils from refining; fatty alcohols.

3.

18.01/06

Cocoa boans, whole or broken, raw or roasted.

4.

25.01/32

. Concentrates of essential oils in fats, in fixed oils, or in waxes or the like, obtained by cold absorption or by maceraction. Mixtures of two or more odoriferous substances (natural or artificial) and mixtures (including alcoholic solutions) with a basis of one or more of these substances, of a kind used as raw materials in the per- fumery, food, drink or other indus- tries. Perfumery, cosmetics and toilet preparations.

l i.

34.01/07 Sulphur of all kinds, other than subli- med sulphur, precipitated sulphur and colloidal sulphur. Asbestos, Crude natural borates and concentrates thereof (calcined or not), but not including borates separated from natural boric acid containing not more than 85 % of H3 B03 calculated on the dry weight.

27.12/13

5. Mineral waxes

'•

6.

Lubricating preparations and pre- parations of a kind used for oil or grease treatment of textiles, leather or other materials, but not including preparations containing 70% or more by weight of petroleum oils or of oils obtained from bituminous minerals. Artificial waxes (including water schedule waxes); prepared waxes, not emulisifled or containing sol- vents.

12.

36.01/08 Inorganic chemicals; organic and inorganic compounds of precious metals, of rare earth metals, of radio- active elements and of isotopoes :—

Ferro-cerium and other pyrophoric alloys in all forms.

13. Miscellaneous chemical products. 38.01/19

14.

39.01/06, 39.07

Artificial resins and plastic materials, cellulose esters and others; articles thereof.

15.

41.01/16 T. Chemical Elements. "1 IV. Inorganic Bases and Metallic | Oxides, Hydroxides and Pcro- | • 28.01/58 \ xides. V. Metallic Salts and Perox-Salts ] of Inorganic Acids. j VI. Miscellaneous J 1

Rubber, synthetic Rubber, Factioe and articles thereof.

29.01/45.

Organic Chemicals,

16.

7.

41.01, 41.02/10

Raw hides and skins (other than fur skins) and leather.

Drug! and Drugs Intermediates.

8.

. Furskins and artificial fur; manu-

17

43.01/04 29.01/45, 30.01. 30.03, 30.04/05.

factures thereof.

32.01/03, 32.04/12

9.

18

44.01/28

. Wood in the rough, whether or not stripped or its bark or merely roughed down. Wood, roughly squared or half-squared, but not further manu- factured. Wood sawn lengthwise, sliced or peeled, but not further pre- pared of a thickness exceeding 5mm; Veneers and chip board.

19

45.01/04

. Natural or agglomerated Cork in- cluding Cork wood and waste cork.

. Rayon Grade Wood Pulp.

20

47.01

21

48,01/21

. Paper and paper board (including cellulose wadding), machine-made, in rolls or sheets. Parchment or gre- ase proof paper and paper-board, and imitations thereof, and glazed trans- parent paper, in rolls or sheets. Composite paper or paper-board (made by sticking flat layers together with an adhesive), not surface-coateti or impregnated, whether or not internally reinforced, in rolls or sheets. Paper and paper-board, corrugated (with or without flat surface sheets) creped, crinkled, embossed ot perforated, in rolls or sheets. Paper and paperboard,

Synthetic organic tanning substances, and inorganic tanning substances; tanning preparations, whether or not containing natural tanning materials; enzymatic preparations for pretanning (for example, of enzymatic, pancreatic or bacterial origin). Colouring mat- ter of vegetable origin (including dye- wood extract and other vegetable dyeing extracts, but excluding in- digo) or of animal origin. Prcpatcd pigments, prepared pacifiers and prc- parea colours, verifiable enamels and glazes, liquid lustres and similar pro- ducts, of the kind used in the ceramic, enamelling and glass industries; engo- bles (slips); glass firit and othei glass, in the form of powder, granules or flakes, Varnishes and lacquers; distempers; prepared water pig- ments of the kind used for finishing leather; paints and enamels; pig- ments in linseed oil, white-spirits, spirits of turpcrtine, vnrnish oi other paint or enamel media; stamping foils; dyes or other colouring mat- ter in forms or packings of a kind sold by retail.

!

I. Optical glass and elements of optica glass, other than optically workec elements; blanks for corrective spec- tacle lenses, and glass fibres includinf glass wool.

impregnated, coated, surface colou- red, surfaced-decornted or printed (not being merely ruled, lined or squared and not constituting prin- ted matter within Chapter 49) in rolls or sheets.

32

!, Industrial Diamond and Synthetic

: 71.02/71.04

Diamond Powder,

Transfers (Decalcorrtanias).

49.08/11

22.

33

23.

50.03/08

Spun Silk Yarn and Noil Yarn.

34

51.01/03 and 51.04

24.

72.03 73.03/05, 73.06/07, ; 73.08, 73.09/10, 73.11,73.12,73.13, 73.15,73.17,73.19, 73.20,73.20,73.32, 73.33/40and 83.01/ 15.

Yarn of man-made fibres (continuous) moncfil strip (artificial straw and the like) and imitation catgut/synthetic gut whether or not Twisted or Braided or man-made fibre materials. Wo- ven fabrics or man-made fibres (con- tinuous); including woven fabrics of monofil or strips of Heading No. 51.01/03.

25.

51.05

Chemical treated High Tenacity Ny- lon-Nylon Duck suitable for bonding to rubber.

53,01/13

26. Sheep or lamb's wool and other ani- mal hair, whether or not carded or combed, including waste, tops, yarn and woven fabrics thereof.

27.

56.01/04, 56,05/06 and 56.07

;. Fcrro Alloys. . Iron or Steel Powder, Blooms, Billets (Prime or Seconds); Billet cuttings Angle, shapes and Sections of Iron and Steel, hot rolled, rolled, forged, extruded, cold formed or cold fini- shed, sheet piling of Iron or Steel, whether or not drilled, punched or made from assembled elements; strips sheets and plates or iron or steel whe- ther cold rolled or hot rolled, grain oriented or non-grain oriented in- cluding high carbon steel or alloy steel and stainless steel in cut length or in coils; Bars and rods of Iron or Steel; Tubes and Pipes including fit- tings, thereof of Iron and Steel or alloy steel whether seamless or wel- ded; Alloy steel and high carbon steel in the forms mentioned in hea- dings 73.06/07 to 73.14; Handlos screws nuts (metals); safety plugs and inserts (metal); and steel caps and triangle shoe eyelots for shoe uppers.

35,

73.16

59.01/15, 59.16/17

28.

, Railway and tramway track construc- tion material of iron or steel, the follo- wing; rails, checkrails, switch blade*, crossings (or frogs), crossing pieces, point rods, rack rails, sleepers, fish plates, chairs, chair wedges, sole pla- tes (base plates), rail clips, bed plates, ties and other material specialised for joining or fixing rails. Copper and articles thereof.

36.

Nickel and articles thereof.

37.

Aluminium and articles thereof.

38.

Man-made fibres (discontinous) and waste (including yarn waste and pulled or garnetted rags) of man-made fibres (continuous or discontinuous) whether or not carded or cambed or otherwise prepared for spinning; continuous filament tow. -Yarn of man-made fibres] (discontinous or waste). Woven fabrics of man-made fibres (discontinous or waste). Felt and articles of felt, whether or not impregnated or coated. Rub- berised textile fabrics, other than rubberised knitted or crocheted goods. Elastic fabrics and trim- mings (other than knitted or cro- cheted goods) consisting or textile materials combined with rubber threads. Textile fabrics and tex- tile ^articles of a kind commonly used in machinery or plant. PVC leathet Cloth.

61.01/11

29.

74,01/02, 74.03, 74.04/05. 74.06, 74.07/08. 75.01, 75.02, 75.03, 75,04/06 76.01, 76.02, 76.03/04, 76,05, 76.06/07. 78.01

39.

i

Unwrought lead (including argenti- ferous lead); lead waste and scrap.

Unwrought zinc, zinc waste scrap. Unwrought tin, tin waste and scrap.

79.01 80.01

81.01/04

40. 41. 42. Other base metal employed in metal- lurgy and articles thereof.

83.01/15

43.

Men's " and boys' undergarments, including collars, shirt fronts and i cuffs. Collars, tuckers, fallas, bodice-fronts, jebots, cutts, flounces, yokes and similar accessories and trimmings for women's and girls' garments. Made up accessories for articles of apparel (for example, dress l shields, shoulders andjother pads, belts, muffs, sleeve protectors, poc- 1 kets).

30.:

68.01/16

i

<

Locks and padlocks (key, combina- tion or electrically operated), and parts thereof, of base metal; frames incorporating locks, for handbags, trunks or the like, and parts of such frames, of base metal; keys for any of the foreging articles, of base metal. Base metal fittings and mountings of a kind suitable for furniture, doors, atair cases, windows, blinds, coach- work, saddlery trunks, caskets and

Friction material (segments, discs, washers, strips, sheets, plates, rolls and the liko) of a kind suitable for brakes, for clutches or the like with a basis of asbestos, other mineral sub- rtances or of cellulose, whether or not ;ombined with textile or other materials.

cuff-links, and pressfasteners, including snapfasteners, zip-faste- ners (slide fasteners), and press- studs; blanks and parts of such articles.

MAHESH KUMAR Under Secy.

44.

the liko (including automatic door closures); base metal hat-racks, hat pegs, brackets and the like. Wire, rods, tubes, plates, electrodes and similar products of base metal or of metal carbides, coated or cored with flux material, of a kind used for sol- dering, brazing, welding or deposi- tion of racial or of metal carbides; wire and rods, or agglomerated base metal powder, used for metal spra- ying. Machinery and Mechanical Applian- ces, parts thereof, and parts of ma- chinery falling under heading Nos. 84,36, 84.37, 84 38 and 84.40.

45.

84.01/02, 84.04/05, 84.06,84.08, 84.09, 84.10, 84.11, 84.12 84.13, 84 14, 84.15, 84.17, 84.18,84,19, 84.20,84.21,84.22, 84.38 and 84.40. 84.51/55.

46. 47. 48.

Parts and accessories of duplicating machines. Parts of machine tools. Ball or roller bearings. Electrical Machinery and Equipment parts thereof.

49.

84.45/48. 84.62. 85.01, 85.02, 85.03, 85.04,85.05,85.06/ 07, 85.08, 85.09, 85.10, 85,11, 85.12, 85.13,85.14,85.15, 85.16, 85.17, 85.18/ 27 and 85.28. 86.09 and 86.10.

50.

87.04/06, 87.09/12.

Parts of Railway and Tramway Loco- motives and Rolling-Stock. Railway and Tramway Truck fixtures and fittings; mechanical equipment, not electrically powered, for signalling to or controlling road. Rail or other vehicles, ships or Aircraft; parts of the foregoing futures, fittings or Equipment. Parts and accessories of the vehicles falling within heading Nos. 87.01, 87.02 or 87.03, 87.09/12.

51. Parts of ships, boats and floating structures.

73.30, 84.65 and 89,01/03.

52. Optical, photographic, cinemato- graphic, measuring, checking, preci- sion, medical and surgical instruments and apparatus; parts thereof.

90.01, 90.02, 90.03/04 90.07 90.08,90.09,90.10,' 90.11/12, 90.13, 90.14, 90.15, 90.17/J8, 90.27, 90.28, 90.29.

53.

92.01/13

Parts, components and accessories of Gramophones, dictating machines and other sound recorders and repro- ducers, including recordplayers and tape decks, with or without sound- heads; television image and sound recorders and reproducers, magne- tic.

54.

94.01/04

Parts, components and accessories of Medical, dental, surgical or veteri- nary furniture (for example, operating tables, hospital beds with mechanical fittings); dentists' and similar chairs with mechanical elevating, rotating or reclining movements.

72 GI/° 1

oxtension of the period of ship- ment beyond the initial period sot down in the licence, may be considered, on merits, by the licensing authority, having regard to the period of deli- very of the Capital Goods as contracted for by the over- seas suppliers (in the case of licences issurd against tied credits or aids, however, the terminal date will be kept in view while considering) such requests for revalidation. Such extension of validity of Capital Goods licences may be done by the licensing autho- rity upto a pei iod of 3 years from the date of issue; for further extension, the orders of Ihe Chief controller of Imports and Exports, New Delhi will have to be first taken by the licensing autho- rity".

41

3.

Chapter IX, Para 221(ix)

IMPORT TRADE CONTROL

PUBLIC NOTICE NO. 13-ITC(PN )/80

New Delhi, the 21st April, 1980

Subject :—Hand Book of Import-Export Procedures, April

1980—March 1981.

File No. ITC/HB/Chapter 1/80-81 Attention is invited to H and Book of Import-Export Procedures, April 1980-March 1981, published undei the Department of c°inmeice Public Notico No. 10-ITC (PN)/80, dated the 15th April, 1980.

The existing sub-para shall be deemed to have been substi- tuted by the following :— "(it) After the shipment is effected but within a period of 7 days of the shipment, each licence holder shall inti- mate to the licensing autho- rity which issued the licence, particulars of the shipment(s) actually effected. Failure to do so will entail him to the refusal of grant of export licence for the items allowed under limited ceiling for further exports in terms of clause 5(9) of Exports (Con- trol) Order, 1977 as amended from time to time, for the licensing period".

108

4.

For the word "commission", 2. The following further errata shall be deemed to have been made in the Hand Book of lmport-Expori Procedures, 1980-81 at the appropriate places mentioned anainst each :—

read "commissioner".

Erratum

Refeience

SI. No.

5. 111

After the word "Assistant", the word "Chief" shall bi inser- ted.

115

(3.

The words "Pakistan ot" shall Page No. of Hand Book of Import- Export Procedu- res, 1980-M

be deleted.

2

1

3

4

1. 37

The figure "(1)" shall be added

Chapter Vill, Para 199.

after figure "199".

2. 37 Chapter Vill.

115

7.

For the word "or" read "for".

A new sub-para shall be deemed to have been added after re- numbered para 19(1), as under :—

"(2) In the case of Capital Goods licences, requests for

Appendix 2, SCHEDULE II, Col 2, Item 3. Appendix 2, Export (Control) Ordor, 1977, Clause 2, sub-clause(b), sixth line. Appendix 4, Public Notice No. 34-ITC (PN)/ 88 dated 16-5-1978, Para 1, sixth line. Appendix 4, Public Notice No. 34-ITC (PN)/ 78 dated 16-5-1978, Para 3, sub-para (2), third line.

added as under :— "(cj In no case, the fees should be deposited- in a Treasury. Trea- sury Receipt will not be accepted".

9. 116

Tho words "Pakistan or" shall

17. 133

be deleted.

Appendix 9, Refund of Application, Fees, Para (b).

117

The words "Pakistan or" shall

10.

(1) Tho sign and word "/challan" appearing in fifth line, seventh line, ninth line, tenth line, and the word and sign "trea- sury/" appearing in the eleventh line shall be deleted.

be deleted.

(2) A new para (d) shall be

added after the existing para (c) as under : -

For the word "continues".

124

11.

read "continuous".

]24

12.

For the word "ofr", read "for".

13.

For the word "of", read "or".

124

14.

For the word "vourcor", rtad

124

"voucher".

Appendix 4, Public Notice No. 46-|TC(PN)/ 7K, dated 3O-6-197N, Paia ], soventh lino. Appendix 4, Department of Revenue Notifi- cation No. G.S.R, 290(E) dated 16-5-1978, seventh line Appendix 4, Department of Revenue Notifica- tion No. GSR 251(E) dated 16-5-78 Para ](3), second line. Appendix 6, Category (A), Col. (2), Condition (j), first line. Appendix 6, ; Category (A), Col. (2)p Condition (i), second line, Appendix 6, Category (C), Col. (1), second line. Appendix 6, Category (F), Col. (2), Condition (i), sixth line, Appendix 6.

15. 125

"(d) In case of refund of fees whcre the amount had been deposited in the Treasury before 1-7-1976, the num- ber and date of the Treasury Challan and the name of the Trea- sury should be quoted on the application for refund instead of the Bank Receipt num- ber etc. In these cases, the original credit should be got veri- fied arid the fact of refund got notod by by the concerned Treasury Office be- fore submission of the Refund Bill to Pay & Accounts offi- cer for payment", In column (1), before the entry 'Rupee company having foreign collaboration', the letter and sign "(1)" may be inserted.

133

1) This para shall be renum-

16,

(3) The existing para (d), (ej; (f) and (g) shall be re- numbered as "(e), (f), (g) and (h)" respectively. (4) The sign and word "chal-

bered as "(i)(a)".

Appendix 9, ( PAYMENT OF FEES, < para (i).

lan" appearing in the second line of renumbered para (f) shall be deleted.

189

18.

'2) Sub-para in para (i), star- ting with "Import licence. . " and ending with "in this Appendix" shall be numbered as (b)".

The existing sub-para (xi> appearing between sub-paras 3. (i) and (lii) shall be substitu-

Appendix 17, POSTAL NOTICE, Para

i

ted by the following :—

"(ii) Deleted".

C. V E N K A T A R A M A N, (3) The word "chalJan" ap- pearing in eighth line of re- numbered sub-para (b) shall be deleted.

Chief Controller of Jmports and Exports

PRINTED BY THE MANAGER, GOVT. OF INDIA PRESS, RING ROAD, NEW DBLHI-110064

AND IUHIISHED BY THE CONTROLLER OK I'UULICVTIONS, DELHI-110054, 1980.