©
Reg. No. രജി. നമ്പർ KL/TV(N)/12/2009-2011 Government of Kerala കേരള സർക്കാർ
2010 KERALA GAZETTE
PUBLISHED BY AUTHORITY
No.
Vol. LV
2010 നവംബർ 2
43 THIRUVANANTHAPURAM, TUESDAY തിരുവനന്തപുരം, ചൊവ്വ
നമ്പർ വാല്യം 55 } } 2nd November 2010
11th Karthika 1932 1932 കാർത്തിക 11
COCHIN UNIVERSITY OF SCIENCE AND
TECHNOLOGY
NOTIFICATION
No.EL.23 (2) /Nomination/2008. 26th July 2010.
It is hereby notified that the Chairman, University
Grants Commission has nominated Prof. P. Prakash Babu,
Department of Biotechnology, School of Life Sciences,
University of Hyderabad- 500 046 to the Academic Council
of this University in accordance with Section
23 (2) "Nominated Members (iii)" of the CUSAT Act,
1986.
The term of office of the above member shall be for
a period of two years with effect from 16-7-2010 subject
to the provisions of CUSAT Act, 1986 (31 of 1986) and
statutes made thereunder.
Dr. N. CHANDRAMOHANAKUMAR,
Kochi. Registrar.
COCHIN UNIVERSITY OF SCIENCE AND TECHNOLOGY
NOTIFICATIONS
(1)
No. Conf. II/2941/2/2009.
18th January 2010.
In exercise of the powers conferred under Section 24 (ii) read with Section 42 (1) of CUSAT ACT, 1986 (Act 31 of 1986) the Academic Council at its meeting held on 24-4-2009 resolved to approve the Regulation and Scheme of Examination for the 5 year B.B.A, LL.B (Honours) Degree course offered at the School of Legal Studies as appended.
The Syndicate at its meeting held on 22-8-2009 vide Item No. 547.38 approved the above decision taken by the Academic Council and made this effective from the academic year 2009-10.
APPENDIX
REGULATION FOR THE FIVE YEAR B.B.A, LL.B. (HONOURS) COURSE
(As approved by the Board of Studies and Faculty of Law held on 7-4-2009)
1. The Bachelor's Degree in Business Administration (B.B.A.) and Law (LL.B.) (Honours) shall consist of regular course of study for a minimum period of 10 semesters in five years after plus two.
2. The course of study shall be by regular attendance at the requisite number of lectures, tutorials and practical training.
3. The medium of instruction shall be English.
4. Number of seats: Number of students to be admitted each year shall be decided and notified by the University from time to time.
Eligibility
5. Minimum qualification for admission:—A candidate who seeks admission to the course shall have passed plus two examination with the prescribed percentage of marks (including languages) at the time of admission. The candidate should have secured a minimum of sixty per cent marks for the plus two examination if he/she pursued science group or commerce group. The candidates who are from the arts/humanities stream shall have a minimum of fifty-five percentage of marks for the plus two examination. Candidates belonging to SC or ST communities or belonging to OEC communities with a pass in the plus two examination with 40 per cent marks are entitled to seek admission.
6. Candidates should not have crossed 20 years of age on July 1st of the year of admission (22 years in case of SC/ST and OBC).
Procedure for selection
7. Admission to the course shall be made from the rank list prepared by the University on the basis of score obtained by the candidate in the Common Admission Test consisting of written test, group discussion and interview. If large number of candidates qualify the written test, a short list of five times than the sanctioned strength of the course may be made to call candidates for group discussion and interview. In case of SC & ST students from this list, if five times students are not available all the SC & ST candidates who have appeared for the CAT may be invited for group discussion and interview.
8. In making selection for admission, the pattern of reservation prescribed by the University shall be followed.
Fee Structure
9. A student shall pay the fees prescribed by the University from time to time.
Curriculum
10. The B.B.A., LL.B. (Hons.) Curriculum shall consist of 20 compulsory courses in Business Management, 26 compulsory and 14 elective courses in Law. Six of the elective courses shall be chosen and offered by the Law School from among the General Elective Courses. The other eight elective courses shall be chosen either wholly from a particular group or from various groups shown as Special Elective Groups viz., Constitutional Law, Business Law, Law and Agriculture, Intellectual Property Law and such other groups introduced by the University/Bar Council from time to time depending upon the availability of infrastructural facilities. However, if the Special Elective Courses are chosen entirely from one special group the student shall be awarded an Honours degree specifically mentioning the group.
[For example, if all the 8 special electives are from Business Law Group, the student shall be given a B.B.A., LL.B. (Honours) Degree in Business Law.]
A. Compulsory Courses in Law are:
(1) Jurisprudence (Legal Method, Indian Legal System and Basic Theory of Law)
(2) General Principles of Contract (Law of Contract—I)
(3) Special Contracts (Law of Contract—II)
(4) Law of Torts and Motor Vehicles Accidents
(5) Consumer Protection Law
(6) Family Law - I
(7) Family Law - II
(8) Law of Crimes - I
(9) Law of Crimes - II
(10) Law of Criminal Procedure
(11) Constitutional Law - I
(12) Constitutional Law - II
(13) Property Law .
(14) Law of Evidence (15) Civil Procedure Code and Limitation Act
(16) Administrative Law
(17) Company Law
(18) Public International Law
(19) Principles of Taxation Law
(20) Environmental Law
(21) Labour Law-I (Trade Unions and Industrial Disputes)
(22) Labour Law-II (Social Securities Law)
B. Compulsory Clinical Courses in Law:
(23) Drafting, Pleading and Conveyance
(24) Professional Ethics and Professional Accounting System
(25) Alternative Dispute Resolution
(26) Moot Court Exercise and Internship
C. Courses in Management:
(1) Principles of Management
(2) Managerial Economics-I
(3) Business Statistics
(4) Managerial Economics-II
(5) Human Resource Management
(6) Financial Accounting
(7) Cost and Management Accounting
(8) Advertising and Publicity Management
(9) Business Communication
(10) Financial Management
(11) Marketing Management
(12) Operations Management
(13) Business Ethics
(14) Information Technology for Managers
(15) Industrial Relations
(16) Business Environment
(17) Organizational Dynamics
(18) Management Project
(19) General English-1
(20) General English-II
D. General Elective Courses in Law:
(1) International Trade Law
(2) Criminology, Penology and Victimology
(3) Air and Space Law
(4) Law and Medicine
(5) Women and Law
(6) Law Relating to Child
(7) Law, Poverty and Development
(8) Interpretation of Statutes
(9) Science, Technology and Law
(10) Forensic Science and Medical Jurisprudence (11) Private International Law
(12) Land Utilization Law
(13) International Humanitarian and Refugee Law
(14) Law of the Sea
(15) Laws Relating to Armed Forces
(16) Laws Relating to Agriculture
(17) Law of Local Self Government
(18) Disability Law
(19) Law Governing Scientific Research
(20) Law Relating to Ships
(21) Law on Building and Engineering Contracts
(22) Securities Laws
(23) Marine Safety Law
(24) Healthcare Law
(25) Law of Co-operative Societies
(26) Disaster Management Law
E. Special Elective Courses in Business Law:
(1) Banking Law
(2) Insurance Law
(3) Law of Carriages
(4) Foreign Trade Law
(5) Bankruptcy and Insolvency Law
(6) Law of Corporate Governance
(7) Law of Merger and Acquisition
(8) Competition Law
(9) Information Technology Law
(10) Law on Corporate Finance
Teaching Scheme
11. Every teacher shall prepare a teaching plan at the commencement of the course. The teaching plan shall contain the details of lectures, seminars, discussions, treatises and other materials relied upon by him or her for handling the classes which shall be participatory. Discussion methods of teaching will be adopted.
Examination
12. There shall be a University examination at the end of each semester. Candidates having not less than 80% attendance in each paper shall alone be admitted to the examination. 10% of the required percentage of attendance in each paper may be condoned by the Vice Chancellor on medical grounds.
13. For each written paper carrying 100 marks, 50% shall be set apart for being awarded by way of internal assessment and 50% marks for the written external examination. Internal assessment shall be made on the basis of overall performance during the semester such as regularity of attendance, preparation and presentation of assignments, test paper scoring and class room participation.
14. The performance in practical training papers shall be assessed internally.
15. A candidate who is registered and is entitled to be presented for the examination in a semester shall be entitled to pursue the studies for the next semester of the course.
16. There shall be a viva-voce at the end of tenth semester examination which may cover all the courses taught for the whole programme. The viva board shall consist of the Chairman and two examiners, at least one of whom shall be an External Examiner.
17. A candidate admitted for this course shall complete the programme within a period of eight years from the date of admission.
Pass minimum and classification
18. A candidate who secures not less than forty percentage in the internal as well as external examinations and also secure and aggregate of fifty per cent of the total marks for individual papers in the semester examination shall be declared to have passed the examination in that paper.
19. A candidate who passes in all the papers and secures 50% or more of the aggregate marks for all the ten semesters but less than 60% shall be declared to have passed whole examination in second class.
20. Successful candidates with 60% marks and above in the aggregate for all the ten semesters shall be declared to have passed the whole examination in first class.
21. Successful candidates with seventy-five percentage marks or above in the aggregate for all the ten semesters shall be declared to have passed the examination with distinction provided he/she passes all the examinations within the period of whole programme. Ranking shall be done on the basis of marks obtained by the candidate in the whole examination passed in the first chance.
SCHEME OF EXAMINATION
Code Name of Paper Duration of Marks Total
Examination Internal External
(1) (2)
(3) (4) (5) (6)
First Semester
C.M. 1 General English—1 3 hours 50 50 100 C.M. 2 Principles of Management 3 hours 50 50 100 C.M. 3 Managerial Economics—I 3 hours 50 50 100 C.M. 4 Business Statistics 3 hours 50 50 100 C.L. 1 Law of Torts and 3 hours 50 50 100 Motor Vehicles Accidents
C.L. 2 General Principles of 3 hours 50 50 100 Contract
Total 300 300 600
Second Semester
C.M. 5 General English—II 3 hours 50 50 100 C.M. 6 Managerial Economics—II 3 hours 50 50 100 C.M. 7 Human Resource Management 3 hours 50 50 100 C.M. 8 Financial Accounting 3 hours 50 50 100 C.L. 3 Special Contracts 3 hours 50 50 100 C.L. 4 Constitutional Law—I 3 hours 50 50 100
Total 300 300 600 (1) (2)
(3) (4) (5) (6)Third Semester C.M. 9 Cost and Management 3 hours 50 50 100 Accounting
C.M. 10 Advertising and Publicity 3 hours 50 50 100 Management
C.M. 11 Business Communication 3 hours 50 50 100 C. L. 5 Jurisprudence (Legal Method, 3 hours 50 50 100 Indian Legal System and Basic Theory of Law)
C.L. 6 Constitutional Law—II 3 hours 50 50 100 C.L. 7 Law of Crimes—I 3 hours 50 50 100
Total 300 300 600
Fourth Semester
C.M. 12 Financial Management 3 hours 50 50 100 C.M. 13 Marketing Management 3 hours 50 50 100 C.M. 14 Operations Management 3 hours 50 50 100 C.L. 8 Family Law—I 3 hours 50 50 100 C.L. 9 Administrative Law 3 hours 50 50 100 C.L. 10 Law of Crimes—II 3 hours 50 50 100 Total 300 300 600
Fifth Semester
C.M. 15 Business Ethics 3 hours 50 50 100 C.M. 16 Information Technology for 3 hours 50 50 100 Managers
C.L. 11 Law of Criminal Procedure 3 hours 50 50 100 C.L. 12 Family Law—II 3 hours 50 50 100 C.L. 13 Consumer Protection Law 3 hours 50 50 100 C.L. 14 Law of Evidence 3 hours 50 50 100 Total 300 300 600
Sixth Semester
C.M. 17 Industrial Relations 3 hours 50 50 100 C.M. 18 Business Environment 3 hours 50 50 100 C.L. 15 Company Law 3 hours 50 50 100 C.L. 16 Labour Law—I 3 hours 50 50 100 C.L. 17 Civil Procedure Code and 3 hours 50 50 100 Limitation Act
C.L. 18 Public International Law 3 hours 50 50 100 Total 300 300 600 (1) (2)
(3) (4) (5) (6)Seventh Semester C.M. 19 Organizational Dynamics 3 hours 50 50 100 C.L. 19 Principles of Taxation Law 3 hours 50 50 100 C.L. 20 Labour Law-II 3 hours 50 50 100 C.L. 21 Environmental Law 3 hours 50 50 100 C.L. 22 Property Law 3 hours 50 50 100 C.C.L. 1 Drafting, Pleading and .. 100 .. 100 Conveyance
Total 350 250 600
Eighth Semester
G.E.C. 1 Elective—1 3 hours 50 50 100 G.E.C. 2 Elective—2 3 hours 50 50 100 G.E.C. 3 Elective—3 3 hours 50 50 100 G.E.C. 4 Elective—4 3 hours 50 50 100 C.M. 20 Management Project .. 100 .. 100 C.C.L. 2 Professional Ethics & .. 100 .. 100 Professional Accounting System
Total 400 200 600
Ninth Semester
G.E.C. 5 Elective—5 3 hours 50 50 100 G.E.C. 6 Elective—6 3 hours 50 50 100 S.E.C. 1 Special Elective-1 3 hours 50 50 100 S.E.C. 2 Special Elective-2 3 hours 50 50 100 S.E.C. 3 Special Elective-3 3 hours 50 50 100 C.C.L. 3 Alternative Dispute .. 100 .. 100 Resolution
Total 350 250 600
Tenth Semester
S.E.C. 4 Special Elective-4 3 hours 50 50 100 S.E.C. 5 Special Elective-5 3 hours 50 50 100 S.E.C. 6 Special Elective-6 3 hours 50 50 100 S.E.C. 7 Special Elective-7 3 hours 50 50 100 S.E.C. 8 Special Elective-8 3 hours 50 50 100 C.C.L. 4 Moot Court Exercise .. 100 .. 100 and Internship
V.V. Viva-Voce
100 100 Total 350 350 700 (2)
No. Conf.II/2941/2/2009 (1).
9th September 2009.
In exercise of the powers conferred by Section 24 (ii) read with Section 42 (1) of the CUSAT Act 1986 (Act 31 of 1986) the Academic Council at its meeting held on 24th April, 2009 resolved to approve the Regulation and Scheme of Examination of the 4 year course in B. F.Sc. (Nautical Science) offered by CIFNET as appended.
The Syndicate at its meeting held on 1-8-2009 vide Item No. 546.07 approved the above said Regulation and Scheme of Examinations and made it effective from 2005 admission onwards.
REGULATIONS AND SCHEME OF EXAMINATlON OF THE 4 YEAR COURSE In B.F.Sc. (Nautical Science) (Effective from 2005 admission onwards)
The B.F.Sc., Degree course, in Nautical Science conducted by CIFNET. Cochin funded by Ministry of Agriculture, Government of India, is an eight semester programme, which include lectures, laboratory work, seminars etc. During the eight semesters the students will also undergo Course work and have to do a project work in an industry/ R & D organisation or in the Department and submit a report on his/her work. The course structures and scheme of examination are given in clause (10) below :
1. Conditions for Admission
Candidates for admission to the B.F.Sc. (Nautical Science) shall be required to possess the following qualifications 1.1. The candidate shall have passed the plus two or equivalent examination of any Board of Secondary Education with Mathematics and Science.
1.2. The age limit for admission is as follows : Maximum : 20 as on 1st October of the respective year.
1.3. The Candidate shall have secured a minimum 50% marks in Mathematics and 50% aggregate marks in other Science Subjects and minimum 50% marks in English either in X or XII Std.
1.4. The Candidates shall also satisfy the conditions regarding physical fitness as prescribed by the Director General of Shipping.
1.5. Admission to the course shall be through Common Admission Test conducted by CIFNET and personal interview conducted by a Committee including the representatives from the University.
1.6. Criteria of admission will be on the basis of Marks obtained by the candidate in Mathematics and Science Subjects in plus two. Common Admission Test and Interview the weightage of which are 90 marks as above in plus two. 10 marks for interview and 100 marks for Common Admission Test.
1.7. No admission shall be made after 30 days from the date of commencement of the first semester.
2. Duration of the Course
2.1. The curriculum requirement of B.F.Sc. (Nautical Science) Degree shall consist of a period of 4 Academic Years as prescribed in the curriculum.
2.2 The four Academic Years shall be split into 8 semesters. Examinations will be conducted at the end of each semester in subjects prescribed in the respective scheme of examinations.
2.3. The teaching programme for each Semester shall consist of minimum 16 weeks with 80 working days.
3. Promotion to Higher Semesters
3.1. A candidate shall be eligible for promotion from one semester to the next semester only if
(a) He/She has vaild registration for the University Examination.
(b) He/She has secured a minimum of 75% attendance.
3.2. Supplementary University Examination for all Semesters shall be held along with the regular examinations.
3.3. Special supplementary examination may be arranged for the 7th and 8th Semesters.
3.4. The total number of chances to appear for the examination in any subject is limited to three.
3.5. A candidate who does not register for the examination at the end of semester shall not be promoted to the next semester.
4. Eligibility for the Degree
4.1. A candidate shall become eligible for the B.F.Sc. (Nautical Science) Degree when he/she has undergone the prescribed course of study for a period of eight semesters in the University and has passed the prescribed examinations in all the semesters.
4.2 The candidates shall complete all requirements for Degree within a period of 8 academic years from the date of admission to the first year.
5. Rules for Readmission
5.1. As per University Rules.
6. Pass Recuirements and Classification of Successful Candidates
6.1. 50% of marks are allotted for University semester end examination and 50% for internal assessment marks.
6.2. A Candidate who secures 50% of the aggregate of the University examination marks and internal assessment marks put together shall be declared as passed in the examination in that subject. In subjects where there are no University Examination a candidate shall secure 50% marks for internal assessment for a pass in that subject, including projects.
6.3. A candidate who qualifies for the degree passing all the subjects of all the examinations and secures an aggregate of not less that 75% of the grand total of marks including internal assessment marks for all the eight semesters shall be declared to have passed in First Class with Distinction.
6.4. A candidate who qualifies for the degree passing all the subjects of the examination and secures not less than 60% of the grand total of marks including internal assessment marks for all the 8 semesters shall be declared to have passed in First Class.
6.5. All the other successful candidates shall be declared to have passed all the examinations for the degree in Second Class.
6.6. Ranking among the candidates will be limitted to those who have passed all the examinations in the first available chance and have secured at least First Class.
7. Rules Regarding Internal Assessment Marks
7.1. The total internal assessment marks for theory papers shall be made up of 80% for internal tests and 20% for assignments and seminars. For laboratory papers/industrial project practicals and onboard practical training, internal assessment will be based on internal test and the day to day performance in the labs/industry.
8. Number of Seats
The number of seats for general category shall be 15. In addition to this one each of seats shall be given to NRI and Foreign National. The eligible number of seats for SC, ST & OBC shall be decided as per the rules and regulations of Government of India. The increase in total number of seats shall be subject to availability of infrastructure.
9. Revision of Curriculum
9.1. The University may from time to time amend or revise, amend or change the scheme or examination and syllabi.
9.2. New schemes/regulations shall be made binding to new admission only.
9.3. Whenever there is a change in the existing scheme of examinations, the University examinations based on the old scheme/syllabi will be conducted for two more academic years.
10. Scheme of Course and Examination
The Scheme of examinations are as follows:
SCHEME OF EXAMINATION
&
DISTRIBUTION OF THEORY AND PRACTICAL HOURS
No. of Hours/week Max. marks
Subjects Theory Practical Total Internal External Total
(1)
(2) (3) (4) (5) (6) (7)
Semester I
1.1. General English 3 .. 3 50 50 100 1.2. General Mathematics 4 .. 4 50 50 100 1.3. Classification of 6 .. 6 50 50 100 Fishing Gear
1.4. Naval Architecture - I 6 .. 6 50 50 100 (Fishing Craft Technology)
1.5. Marine Fishery 5 .. 5 50 50 100 Resources
.. 6 6 50 50 100 1.6. Nautical Science-I [Chart Work (Practicals) - I]
Total 24 6 30 300 300 600
Semester II
2.1. Communicative 3 .. 3 50 50 100 English
2.2. Fishery Biology 4 .. 4 50 50 100 2.3. Fishing Gear 5 .. 5 50 50 100 Accessories
2.4. Nautical Science - II
.. 6 6 50 50 100 (Practical Navigation)
.. 6 6 50 50 100 2.5. Fishing Gear Practicals - I
2.6. On Board Training -
.. 6 6 50 50 100 Practical
Total 12 18 30 300 300 600
Semester III
3.1. Physical Oceanography 4 .. 4 50 50 100 3.2. Fishing Gear Materials 5 .. 5 50 50 100 3.3. Nautical Science-III 6 .. 6 50 50 100 (Safety, Seamanship & Watch keeping)
3.4. Fishing techniques-I 5 .. 5 50 50 100 3.5. Marine Ecology 4 .. 4 50 50 100 3.6. On Board Training-Practical .. 6 6 50 50 100 Total 24 6 30 300 300 600 (1)
(2) (3) (4) (5) (6) (7)Semester IV 4.1. Fishing Gear Design-I 6 .. 6 50 50 100 4.2. Marine Meterology 3 .. 3 50 50 100 4.3. Basics of Fishery 3 .. 3 50 50 100 Microbiology
4.4. Nautical Science-IV .. 6 6 50 50 100 [Chart Work (Practicals)-II]
4.5. Fishing Gear Practicals-II .. 6 6 50 50 100 4.6. On Board Training-
.. 6 6 50 50 100 Practical
Total 12 18 30 300 300 600
Semester V
5.1. Fish Preservation 5 .. 5 50 50 100 Techniques
5.2. Fishing Gear Design - II 5 .. 5 50 50 100 5.3. Fishing Techniques- II 5 .. 5 50 50 100 5.4. Nautical Science - V 3 .. 3 50 50 100 (Construction & Stability)
5.5. Fish Processing Technology .. 6 6 50 50 100 Practical
5.6. On Board Training .. 6 6 50 50 100 Practical
Total 18 12 30 300 300 600
Semester VI
6.1. Fishery Products 5 .. 5 50 50 100 Technology
6:2. Marine Engineering - I 5 .. 5 50 50 100 (Engines, Propellers)
6.3. Nautical Science - VI 6 .. 6 50 50 100 (Navigational Aids)
6.4. Naval Architecture - II (Boat 5 .. 5 50 50 100 Building)
6.5. Fishing Gear Practicals -III .. 3 3 50 50 100 6.6. On Board Training - Practical .. 6 6 50 50 100 Total 21 9 30 300 300 600(1) (2) (3) (4) (5) (6) (7) Semester VII 7.1. Introduction to Fisheries 5 .. 5 50 50 100 Extension
7.2. Nautical Science-VII 5 .. 5 50 50 100 (Seamanship & Navigation)
7.3. Marine Engineering-II 5 .. 5 50 50 100 (Refrigeration)
7.4. Ship Operation 4 .. 4 50 50 100 Technology
7.5. Electives (One out of the four) 5 .. 5 50 50 100 1. Design of nets
2. Design of Otter board
3. Design of fishing crafts
4. Modelling of Fishing gear
7.6. On Board Training—Practical .. 6 6 50 50 100 Total 24 6 30 300 300 600
Semester VIII
8.1. Culture Fishery 3 .. 3 50 50 100 8.2. Fleet Management 3 .. 3 50 50 100 8.3. Introduction to Coastal 3 .. 3 50 50 100 Zone Management
8.4. Introduction to Fisheries 3 .. 3 50 50 100 Economics
8.5. Marine Fisheries 3 .. 3 50 50 100 Management
8.6. Project Work .. 15 15 200 .. 200 Total 15 15 30 450 250 700
(3)
No. Conf.II/2941/2/09 (2).
26th November 2009.
In exercise of the powers conferred by Section 24(ii) read with Section 42(1) of the CUSAT Act 1986, the Academic Council at its meeting held on 24th April, 2009 resolved to approve the following:
(1) The Revised Scheme of Examinations for (a) M. Tech. in Computer and Information Science. (b) M.Tech. in Software Engineering offered at Department of Computer Science
(Appendix I).
(2) The Revised Scheme of Examinations for "Diploma Course in Hydrographic Survey" offered by National Institute of Hydrography under Southern Naval Command.
(Appendix II).
The Syndicate at its meeting held on 22-8-2009 vide Item 547.38 resolved to approve the above resolutions made by the Academic Council and made these effective from 24-4-2009 the date of Meeting of the Academic Council.
APPENDIX I
DEPARTMENT OF COMPUTER SCIENCE
PROGRAMME STRUCTURE AND SYLLABUS (2009) ADMISSION
M-TECH. COMPUTER AND INFORMATION SCIENCE
Sl.No. Course Code Course Title Core/Elective Credits LEC LAB Marks
Semester I
1 CSC 3101 Discrete Structures and C 4 3 3 100 Graph Theory
2 CSC 3102 Theory of Computation C 4 3 3 100 3 CSC 3103 Design and Analysis of C 4 3 3 100 Algorithms
4 .. Elective I E 3 3 3 100 5 .. Elective II E 3 3 3 100 Total 18 15 15 500 Electives
CSC 3104: Computer Communication & Networking
CSC 3105: Information Retrieval
CSC 3106: Parallel Computer Architecture
CSC 3107: Intelligent Systems
Sl.No. Course Code Course Title Core/Elective Credits LEC LAB Marks
Semester II
1 CSC 3201 Information Management C 4 3 3 100 2 CSC 3202 Graphics and Visual Computing C 4 3 3 100 3 CSC 3203 Seminar C 1 0 0 50 4 .. Elective III E 3 3 3 100 5 .. Elective IV E 3 3 3 100 6 .. Elective V E 3 3 3 100 Total 18 15 15 550 Electives
CSC 3204: Operating System Design
CSC 3205: Computational Linguistics
CSC 3206: Ad hoc Networks Sl.No. Course Code Course Title Core/Elective Credits LEC LAB MarksSemester III 1 CSC 3301 Project and Viva Voce C 18 0 15 400
Semester IV
1 CSC 3401 Project and Viva Voce C 18 0 15 500 Total Credits for Degree: 72
2. M.TECH. SOFTWARE ENGINEERING
Sl.No. Course Code Course Title Core/Elective Credits LEC LAB Marks
Semester I
1 CSS 3101 Software Engineering Principles C 4 3 3 100 2 CSS 3102 Software Project Management C 4 3 3 100 3 CSS 3103 Seminar C 1 0 0 50 4 .. Elective I E 3 3 3 100 5 .. Elective II E 3 3 3 100 6 .. Elective III E 3 3 3 100 Total 18 15 15 550 Electives
CSS 3104: Model-Driven Software Development
CSS 3105: Management and Maintenance of Information Systems
CSS 3106: Human Computer Interaction
Sl.No. Course Code Course Title Core/Elective Credits LEC LAB Marks
Semester-II
1 CSS 3201 Business Administration & C 4 3 3 100 Technical Communication
2 CSS 3202 Software Architecture & C 4 3 3 100 Design Patterns
3 CSS 3203 Software Quality Management C 4 3 3 100 4 .. Elective III E 3 3 3 100 5 .. Elective IV E 3 3 3 100 Total 18 15 15 500 Electives
CSS 3204: Design of Real Time/Embedded Software
CSS 3205: Agent Based Computing
CSS 3206: Data Mining Sl.No. Course Code Course Title Core/Elective Credits LEC LAB MarksSemester III 1. CSS 3301 Project and Viva Voce C 18 0 15 400
Semester IV
1. CSS 3401 Project and Viva Voce C 18 0 15 500 Total Credits for Degree: 72
APPENDIX II
DIPLOMA COURSE IN HYDROGRAPHIC SURVEY
PROGRAMME No. 8301
SCHEME OF EXAMINATION (REVISED)
Sl.No. Subject Codes Subject/Examination Total HRS Marks
1 01.01.01 Hydrographic Control—I 70 100 2 01.01.02 Hydrographic Control—II 70 100 3 01.01.03 Hydrographic Practice—I 70 100 4 01.01.04 Hydrographic Practice—II 70 100 5 01.01.05 Tides & Basic Oceanography 70 100 6 01.01.06 Administration, Stores & 70 80(Th)+20(P)
Teaching Technique
7 01.01.07 Data Processing-I 70 60(Th)+40(P) 8 01.01.08 Data Processing-II 70 100 9 01.01.09 Data Processing-II Practicals 70 100(P) 10 01.01.10 Field Practical Ashore 70 100 11 01.01.11 Field Practical Afloat 70 100 12 01.01.12 Class Work Book/Practical
.. 100
Work Book/Field book/Fair chart
Total 770 1200
(4)
No. Conf.Il/2941/2/ 09 (3).
16th October 2009.
In exercise of the powers conferred by Section 24(ii) read with Section 42(1) of the CUSAT Act 1986, the Academic Council at its meeting held on 24th April, 2009 resolved to make the following:
(1) Modification of the name of EB 704 Medical Imaging Techniques of B.Tech VII Semester as EB 704/EC 705(E) Medica1 Imaging Techniques.
(2) Revised the Regulation for M. Tech. (PT) Degree Course and Scheme of Examinations of (a) M.Tech (PT) Degree Course in Civil/Chemical/Mechanical Engineering (b) M. Tech (FT) Degree Course in (i) Civil Engineering (Specialisation: Geotechnical Engineering) (ii) Mechanical Engineering (Specialisation: Thermal Engineering) offered by School of Engineering as appended.
The Syndicate at its meeting held on 22-8-2009 vide Item 547.38 approved the above resolutions made by the Academic Council and made them effective from 24-4-2009 the date of Meeting of the Academic Council.
APPENDIX
REGULATIONS FOR M. TECH (PART TIME) DEGREE COURSE
The following regulations are made applicable to all part time M.Tech programmes under Faculty of Engineering in the University with effect from the academic year 2009-10.
1. M. Tech Programme
The Part time M.Tech course in the University is a six semester programme with a total duration of three calendar years: wherein the first four semesters will include lectures, laboratory work/seminars. The student will devote part of fourth semester and the fifth and sixth semesters on a project work related to a relevant area of the specialization either in the Department or in collaboration with an Industrial/Research/Academic Institution outside the University.
1.1 Specialisation
No. of seats
(a) Civil Engineering—Construction Engineering & Management 15
(b) Mechanical Engineering—Production Engineering 15
(c) Chemical Engineering—Process Engineering 15
The subjects of study are offered by Departments/Schools of the University. A student is admitted to the course as per the eligibility criteria prescribed below:
.
1.2.1 Academic Qualifications
Candidates for admission to the M.Tech Degree Course (Part time) shall be required to possess the following qualifications:
(a) Shall have passed B.Tech/B.Sc. (Engg.) / B.E. Degree Examination in the respective branch with a minimum of 50% marks from any University in Kerala or an Examination of any other University/Institution accepted by this University as equivalent thereto.
(b) Applications from candidates who have passed B.Tech/B.Sc (Engg.)/B.E. Degree Examination in allied branches of Engineering/Technology with a minimum of 50% marks may also be considered in the absence of sufficient number of candidates from the respective branch of Engineering. The suitability of such candidates for the course may be assessed by an Admission Committee constituted by the Head of the Department/ School.
(c) Candidates who have passed sections A and B of the Associate Membership/ Graduate Membership Examinations in respective branches conducted by the Institution of Engineers (India). Institution of Electronics and Telecommunication Engineers and Indian Instituite of Chemical Engineers with a minimum of 50 percent marks are also eligible for admission if they have an Engineering Diploma or a Basic Degree in Science.
1.2.2 Professional Experience
A minimum of 2 years of professional experience in the concerned field is required after acquiring the qualifying Degree. This may be relaxed if sufficient number of candidates with the minimum prescribed experience are not available.
1.3 Admission Procedure
Admission will be based on the rank list prepared by giving due weightage to qualifying degree marks (50%), admission test conducted by the department (40%), and number of years of experience after obtaining the degree (weightage at the rate of 1% per year of experience subject to a maximum of 10%).
1.4 Mode of Evaluation
1.4.1 A student would be considered to have progressed satisfactorily at the end of a semester if he/she has a minimum of 75 % attendance and will be permitted to proceed to the next semester. The Vice-Chancellor shall have the power to condone shortage of attendance up to 10 percent on medical grounds on the recommendations of the Head of Division/Department. However such condonation for shortage of attendance shall be given only once during the entire course.
1.4.2 The student shall be evaluated continuously throughout the semester and marks shall be awarded on, the basis of tests/assignments and attendence as detailed below:
A maximum of 20 marks are awarded for the various assignments given to the students by the concerned teacher.
There shall be two class tests and an end semester examination.
The first class test carries 20 marks and will be based on the portions of the syllabi covered till then.
The second class test also carries 20 marks and will be based on the portions coverd till then after the first class test.
The end semester examination will be for 40 marks and shall contain questions from the entire syllabi of the course.
The duration of all the end semester examinations in theory and practicals shall be three hours.
1.4.3 The results of each subject in a semester shall be finalized by the concerned faculty member within 20 days from the last date of the end semester examination and the marks and grades obtained by the candidate in each subject shall be displayed on the notice board with the approval of the course-coordinator and head of the division concerned.
1.4.4 The pass minimum in a subject is 50 %. If a candidate fails to secure 50% marks, he/she shall be deemed to have failed in the subject. .
1.4.5 A supplementary examination for the end semester examination shall be conducted as per the existing M.Tech Regulations for the failed candidates within 15 days from the date of display of the marks/grades.
1.4.6 The final marks/grade of the candidate taking into account his/her performance in the supplementary examination and periodic tests and assignments shall be finalized within 7 days from the date of the supplementary examination. A candidate securing a minimum 50 percent marks shall be considered to have passed in that subject.
1.4.7 If the candidate fails to meet the minimum requirement for pass even after two attempts, he/she shall have to repeat the subject at the next available chance.
1.4.8 A pass in the course will entitle the student to acquire the number of credits allotted for that particular course.
(for the details of number of credits, please refer to the course structure.)
1.4.9 Project evaluation shall be done at the end of V and VI semesters. At the end of VI semester, the students will have to submit a dissertation on his/her project work which will be presented before an examination committee consisting of the head of the department/division, another senior teacher project guide and an external expert.
1.5 Course Structure and the Scheme of Examination
Course structure for each branch of study is annexed in 1.5.1 to 1.5.3.
1.6 Classification
The following grading system is adopted for all the courses. The following grades will be awarded based on the overall performance in each subject.
Range of Marks Grades Weightage
90 % and above S- Outstanding 10
(80-89) A- Excellent 9
(70-79) B-Very Good 8
(60-69 ) C - Good 7
(50-59) D- Satisfactory 6
Below 50% F- Failed 0
Overall performance at the end of the Semester will be indicated by Grade Point Average (GPA) calculated as follows:
G1 C I + G2C2 + G3C3 +........... GnCn
GPA =
C I + C2 + C 3 +.................:Cn
Where 'G' refers to the grade weightage and 'C' refers to the credit value of corresponding course undergone by the student.
At the end of the final semester, Cumulative Grade Point Average (CGPA) will be calculated based on the above formula.
Classification for the Degree will be as follows:
Classification
CGPA
First class with distinction
8 and above
First class
6.5 and above
Second class
6 and above
1.7 Declaration of Results
The final marks will be reported to the University for tabulation and declaration of results. The University shall issue mark lists at the end of each semester.
1.8 Review of Question Papers and Valuation of answer books
At the end of each semester, the question papers set for class test and end semester examination will be reviewed by the Departmental Council. The review report may be placed in the Board of Studies for scrutiny.
1.9 Grievance Cell
The Departmental Council will act as a grievance cell where complaints from the students on the conduct of the class test, semester exam, and the valuation methodology can be examined. The student shall make such complaints within a week of the examination to the Head of the Department in writing for scrutiny by the grievance cell.
1.10 Revision of Regulation and Curriculum
The University may from time to time, revise, amend or change the regulations, schemes of examinations and syllabus. In the case of students already undergoing the course, the change will take effect from the beginning of the following academic year after the changes are introduced and shall cover the part of the course that remains to be completed.
1.5.1 M. Tech Degree Course (PT) in Civil Engineering
(Specialisation : Construction Engineering and Management)
SCHEME OF EXAMINATIONS
Course Code Subject No. of Credits
Semester I
CEC 3101 Applied Mathematics
3
CEC 3102 Construction Management 3
CEC 3103 Advanced Geotechnical Engineering 3
CEC 3104 Structural Dynamics
3
CEC 3105 Seminar 1
1
Total 13
Semester II
CEC 3201 Computational Techniques 3
CEC 3202 Construction Engineering 3
CEC 3203 Foundation Engineering 3
CRC 3204 Elective I
3
CEC 3205 Computer Laboratory
1
Total 13
Elective I
CEC 3204 a Earthquake resistant design of structures 3
CEC 3204 b Design of Metal structures 3
CEC 3204 c Design of special structures 3Course Code Subject No. of Credits Semester III CEC 3301 Construction Equipments & Management 3 CEC 3302 Construction Safety and Fire Engineering 3 CEC 3303 Design of Prestressed concrete structures 3 3 CEC 3304 Elective II 1 CEC 3305 CAD Laboratory
Total 13
Elective II
CEC 3304 a Finite element Method 3 CEC 3304 b Eco-friendly Constructions 3 3 CEC 3304 c Building Services
Course Code Subject No. of Credits
Semester IV
CEC 3401 MIS & Finance Management 3 3 CEC 3402 Elective III CEC 3403 Elective IV 3 CEC 3404 Project—Preliminary Evaluation 4
Total 13
Elective III
CEC 3402 a Modern Construction Materials 3 CEC 3402 b Innovative Construction Practices 3 CEC 3402 c Ground Improvement Techniques 3
Elective IV
CEC 3403 a Maintenance and Rehabilitation of Structures 3 CEC 3403 b Contracts and Legal Aspects in Construction 3 CEC 3403 c Soil Dynamics & Machine Foundations 3
Course Code Subject No. of Credits
Semester V
CEC 3501 Project Progress Evaluation 13
Total 13
Semester VI
CEC 3601 Project Dissertation Evaluation and Viva Voce 13
Total 13
Grand Total 78
1.5.2 M. Tech. Degree Course (PT) in Mechanical Engineering (Production)
SCHEME OF EXAMINATION
Course Code Subject Credit
Semester I
MEP 3101 Applied Mathematics 3 MEP 3102 Advanced Materials Technology 3 MEP 3103 Metal Forming Theory 3 MEP 3104 Advanced Numerical Methods and
MEP 3105 Seminar I
Computational Techniques 3 1
Total 13 Course Code Subject CreditSemester II MEP 3201 Computer Aided Product Design 3 MEP 3202 Metal Cutting Theory and Practice 3
MEP 3203 Maintenance and Reliability Engineering 3
MEP 3204 Elective I
3
MEP 3205 Seminar II
1
Total 13
MEP 3204 Elective I
MEP E-1 Mechatronics MEP E-2 Computer Graphics
MEP E-3 Six Sigma
Course Code Subject Credit
Semester III
MEP 3301 Computer Integrated Manufacturing 3
MEP 3302 Advances in Casting and Welding 3
MEP 3303 Modern Machining Processes 3
MEP 3304 Elective II
3
MEP 3305 CAD/CAM Laboratory 1
Total 13
MEP 3304 Elective II
MEP E-4 Special Purpose Machine Tools
MEP E-5 Microfabrication
MEP E-6 Design of Experiments
MEP E-7 Industrial Tribology
Course Code Subject Credit
Semester IV
MEP 3401 Advances in CNC Machines 3
MEP 3402 Elective III
3
MEP 3403 Elective IV 1
MEP 3404 Project—Preliminary Evaluation 6
Total 13
MEP 3402 Elective III & MEP 3403 Elective IV
MEP E-8 Hydraulic and Pneumatic Control System MEP E-9 Vibration and Noise in Machine Tools
MEP E-10 Design for Manufacture
MEP E-11 Quality Engineering and Management
MEP E-12 Total Quality Management
MEP E-13 Finite Element Method and Application
MEP E-14 Manufacturing System Design
Semester V
MEP 3501 Project Progress Evaluation 13
Total 13
Semester VI
MEP 3501 Project Dissertation Evaluation & Viva Voce 13
Total 13
Grand Total 78 1.5.3 Chemical Engineering (Process Engineering)
SCHEME OF EXAMINATION
Course Code Subject No. of Credits
Semester I
CHEP 3101 Advanced Engineering Mathematics 3
CHEP 3102 Chemical Plant Design and Economics 3
CHEP 3103 Advanced Process Control 3
CHEP 3104 Bioprocess Engineering 3
CHEP 3105 Seminar I
1
Total 13
Semester II
CHEP 3201 New Separation Techniques 3
CHEP 3202 Catalysis and Surface Phenomena 3
CHEP 3203 Environmental Engineering and Management 3
CHEP 3204 Elective I
3
CHEP 3205 Seminar II
1
Total 13
Elective I CHEP 3204A High Polymer Engineering
CHEP 3204B Food Process Engineering
CHEP 3204C Fluidization Engineering
Course Code Subject No. of Credits
Semester III
CHEP 3301 Advanced Chemical Reaction Engineering 3
CHEP 3302 Interfacial Science and Engineering 3
CHEP 3303 Process Safety Engineering 3
CHEP 3304 Elective II
3
CHEP 3305 Seminar III
1
Total 13
Elective II CHEP 3304A Project Engineering of Process Plants
CHEP 3304B Energy Systems Engineering
CHEP 3304C Process Modelling, Simulation and Optimization Course Code Subject No. of Credits
Semester IV
CHEP 3401 Nano Science and Technology 3
CHEP 3402 Elective III
3
CHEP 3403 Elective IV 3
CHEP 3404 Project—Preliminary Evaluation 4
Total 13
Elective III CHEP 3402A Bioenergy Engineering
CHEP 3402B Computational Fluid Dynamics
CHEP 3402C Advanced Chemical Engineering Thermodynamics Elective IV CHEP 3403A Computer Aided Design
CHEP 3403B Pinch Technology CHEP 3403C Advanced Fluid Dynamics & Heat Transfer Course Code Subject No. of Credits
Semester V
CHEP 3501 Project Progress Evaluation 13
Total 13
Semester VI
CHEP 3601 Project Dissertation Evaluation & Viva Voce 13
Total 13
Grand Total 78
M. TECH. (FULL TIME) DEGREE COURSE IN MECHANICAL ENGINEERNIG
SPECIALIZATION—THERMAL ENGINEERING
Course Code Name of the Subject No. of Credits
Semester I
DME 3101 Advanced Heat and Mass Transfer 4
DME 3102 Refrigeration and Cryogenics 4
DME 3103 Incompressible and Compressible Flow 4
DME 3104 IC Engine Combustion and Pollution 4
DME 3105 Elective I
3
DME 3106 Thermal Engineering Laboratory I 1
DME 3107 Seminar
1
Total 21
Elective I
DME 3105 A Principles of Turbo Machinery
DME 3105 B Numerical Methods in Thermal Engineering
DME 3105 C Gas Turbines
DME 3105 D Conduction and Radiation
Course Code Name of the Subject No. of Credits
Semester II
DME 3201 Computational Methods in Engineering. 4
DME 3202 Measurements in Thermal Engineering 4
DME 3203 Propulsion
4
DME 3204 Cryogenic Engineering
4
DME 3205 Elective II
3
DME 3206 Thermal Engineering Laboratory II 1
DME 3207 Seminar
1
Total 21
Elective II
DME 3205 A CFD and its Application
DME 3205 B Introduction to Turbulence
DME 3205 C Diagnostic Methods in Combustion Systems
DME 3205 D Convection and Two Phase Flow Course Code Name of the Subject No. of CreditsSemester III DME 3301 Advanced Thermodynamics 4
DME 3302 Combustion Technology 4
DME 3303 Elective III
3
DME 3304 Project
8
Total 19
Elective III
DME 3303 A Industrial Refrigeration and cold chain
DME 3303 B Finite Element Analysis
DME 3303 C Heat Exchanger Design
Course Code Name of the Subject
No. of Credits
Semester IV
DME 3401 Project Progress Evaluation 15
Total 15
Grand Total 76
M. Tech (Full Time) Degree Course in Civil Engineering
(Specialization—Geotechnical Engineering)
Course Code Course Name L/T P/S Credits
Semester I
CEG 3101 Applied Mathematics 4 4
CEG 3102 Advanced Geotechnical Engineering 4 4
CEG 3103 Soil Exploration and Field Tests 4 4 CEG 3104 Soil Dynamics and Machine Foundation 4 4 4 3 CEG 3105 Elective I 3 1 CEG 3106 Geotechnical Engineering Lab 2 1 CEG 3107 Seminar
Total 20 5 21
Elective I
CEG 3105 a Theoretical Soil Mechanics CEG 3105 b Soil Behaviour CEG 3105 c Design and Evaluation of Pavements
Course Code Course Name L/T P/S Credits
Semester II
CEG 3201 Computational Techniques 4 4 CEG 3202 Advanced Foundation Engineering 4 4 CEG 3203 Ground Improvement Techniques 4 4 CEG 3204 Earthquake Geotechnical Engineering 4 4 4 3 CEG 3205 Elective II 3 1 CEG 3206 Computer Lab 2 1 CEG 3207 Seminar
Total 20 5 21
Elective II
CEG 3205 a Finite Elements in Geomechanics
CEG 3205 b Structural Design of Foundations
CEG 3205 c Landslide Mitigation Course Code Course Name L/T P/S CreditsSemester III CEG 3301 Environmental Geotechnical Engineering 4 4
CEG 3302 Reinforced earth and Geotextiles 4 4
CEG 3303 Elective III
4 3
CEG 3304 Project
12 8
Total 12 5 19
Elective III
CEG 3303 a Earth Retaining Structures
CEG 3303 b Applied Geology and Remote Sensing
CEG 3303 c Soil Structure Interaction
Course Code Course Name L/T P/S Credits
Semester IV
CEG 3401 Project
25 15
Total 25 15
Grand Total 76
(Sd.) Cochin University P. O., Kochi. Registrar.