| राजस् थान राजपत्र विशेषांक | RAJASTHAN GAZETTE Extraordinary | |
| साधिकार प्रकाशित | Published by Authority | |
| श्रावण 08, गरूवार , शाके 1948- जलाई 30, 2026 ु ु Sravana 08, Thursday, Saka 1948- July 30, 2026 |
भाग 4 (ग)
उप-ख(cid:214)ड (I)
राज्य सरकार तथा अन्य राज्य-प्राधिकारियों (cid:217)वारा जारी किये गये (सामान्य आदेशों, उप-
विधियों आदि को सम्मिलित करते हएु ) सामान्य काननी नियमू ।
Department of Consumer Affairs
NOTIFICATION
Jaipur, July 29, 2026
G.S.R.30 .-Whereas, the draft of the Rajasthan Legal Metrology (Enforcement) (Draft Amendment) Rules, 2026, amending the Rajasthan Legal Metrology (Enforcement) Rules, 2011, in exercise of the powers conferred by section 53 of the Legal Metrology Act, 2009 (Central Act No. 1 of 2010) was published as required by sub-section (4) of section 53 of the said Act, in the Rajasthan Gazette Extraordinary Part 4 (Ga) up-khand (I) Dated June 20, 2026 inviting objections and suggestions from all persons likely to be affected thereby before the expiry of a period of seven days from the date on which the copies of the said notification as published in the Official Gazette were made available to the public;
And whereas, copies of the said notification were made available to the public on June 20, 2026;
And whereas, objections and suggestions received from the public on the said draft rules were considered by the State Government;
Now, therefore, in exercise of the powers conferred by section 53 of the Legal Metrology Act, 2009 (Central Act No. 1 of 2010), the State Government in consultation with the Central Government hereby makes the following rules further to amend the Rajasthan Legal Metrology (Enforcement) Rules, 2011 namely:-
1. Short title and commencement.- (1) These rules may be called the Rajasthan Legal
Metrology (Enforcement) (Amendment) Rules, 2026.
(2) They shall come into force on the date of their publication in the Official Gazette.
2. Amendment of rule 2.- In sub-rule (1) of rule 2 of the Rajasthan Legal Metrology
(Enforcement) Rules, 2011, hereinafter referred to as the said rules,-
(i) after the existing clause (a) and before the existing clause (b), the following new
clause (aa) shall be inserted, namely:-
110 राजस्थान राज-पत्र, जलाईु 30, 2026 भाग 4 (ग) "(aa) "Government Approved Test Centre" means a person who has beenapproved by the State or Central Government, as the case may be, in accordance with the provisions of the Act and rules made thereunder, to undertake verification, re-verification and stamping of weight or measure as specified in the Act and the rules made thereunder;"
(ii) in clause (b), the existing expression "and", appearing at the end, shall be deleted;
(iii) in clause (c), for the punctuation mark ".", appearing at the end, the expression "; and" shall be substituted; and
(iv) after clause (c), so amended, the following new clause (d) shall be added, namely:-
"(d) "Self declaration" means self declaration made by manufacturer, repairer or dealer of weight or measure in appropriate Form set out in Schedule- II."
3. Amendment of rule 11.- In rule 11 of the said rules,-
(i) in title, for the existing expression "Licencing of manufacturer", the expression "Registration of manufacturer" shall be substituted;
(ii) the existing sub-rule (1) shall be substituted by the following, namely:-
"(1) Every manufacturer or repairer or dealer of weight or measure shall make an online application in appropriate Form set out in Schedule-II to the Controller Legal Metrology or such other officer as may be authorised by him in this behalf, for issuance of registration certificate and deposit such fee as specified in Schedule-IV:
Provided that any person carrying on business under a licence issued under these rules shall be deemed to be registered and his existing licence shall be deemed to be a registration certificate.";
(iii) the existing sub-rule (2) shall be deleted;
(iv) the existing sub-rule (2A) shall be deleted;
(v) the existing sub-rule (3) shall be substituted by the following, namely:-
"(3) Registration certificate to a manufacturer, repairer or dealer shall be issued in appropriate Form set out in Schedule-III on the basis of self declaration without any prior inspection.";
(vi) the existing sub-rule (4) shall be substituted by the following, namely:-
भाग 4 (ग) राजस्थान राज-पत्र, जलाईु 30 2026 111"(4) Every registration certificate issued to a manufacturer, repairer or dealer shall be valid, unless suspended, cancelled or surrendered.";
(vii) the existing sub-rule (5) shall be substituted by the following, namely:-
"(5) The fee payable for alteration of a registration certificate shall be half of the registration fee as specified in Schedule-IV,"
(viii) in sub-rule (6), for the existing expression "licenced", the expression "registered" shall be substituted;
(ix) in sub-rule (7),-
(a) for the existing expression "licenced", the expression "registered" shall be substituted; and
(b) for the existing expression "conditions of the licence", the expression "conditions of registration certificate" shall be substituted;
(x) the existing sub-rule (8) shall be substituted by the following, namely:-
"(8) Every repairer registered under the Act and these rules shall furnish a security deposit for each registration certificate to the State Government as specified in Schedule-VI.";
(xi) the existing sub-rule (9) shall be substituted by the following, namely:-
"(9) Every registration certificate issued under the Act shall be displayed at a conspicuous place in the premises where the business is carried on."; and (xii) in sub-rule (10), for the existing expression "A licence issued or renewed under this Act", the expression "A registration certificate issued under the Act" shall be substituted.
4. Amendment of rule 12.- In rule 12 of the said rules,-
(i) for the existing heading "Suspension and cancellation of licence granted.-", the expression "Suspension and cancellation of registration certificate.-" shall be substituted;
(ii) in sub-rule (1),-
(a) for the existing expression "licence", wherever occurring, the expression "registration certificate" shall be substituted;
(b) the existing expression ", renewed or continued" shall be deleted; and112 राजस्थान राज-पत्र, जलाईु 30, 2026 भाग 4 (ग) (c) the existing expression ", renewal or continuance" shall be deleted;
(iii) in sub-rule (2), for the existing expression "licence", wherever occurring, the expression "registration certificate" shall be substituted;
(iv) in sub-rule (3),-
(a) for the existing expression "licence", the expression "registration certificate" shall be substituted; and
(b) for the existing expression "licencee", wherever occurring, the expression "holder of registration certificate" shall be substituted;
(v) the existing sub-rule (4) shall be substituted by the following, namely:-
"(4) Every registered manufacturer, repairer or dealer of weight or measure whose registration certificate has been suspended or cancelled shall, after suspension or cancellation, as the case may be, surrender such registration certificate to the authority by whom such registration certificate was issued."; and
(vi) in sub-rule (5), for the existing expression "licencee whose licence", the expression "manufacturer or repairer or dealer whose registration certificate" shall be substituted.
5. Amendment of rule 13.- In rule 13 of the said rules, for the existing expression "licenced", the expression "registered" shall be substituted.
6. Amendment of rule 14.- In rule 14 of the said rules,-
(i) the existing sub-rule (1) shall be substituted by the following, namely:-
"(1) Every person using any weight or measure in any transaction or for protection shall, on or before the due date of verification or re-verification, present such weight or measure for verification or re-verification to the Legal Metrology Officer or Government Approved Test Centre, as the case may be.";
(ii) in sub-rule (2), for the existing expression "Legal Metrology Officer", the expression "the Legal Metrology Officer or Government Approved Test Centre, as the case may be," shall be substituted; andभाग 4 (ग) राजस्थान राज-पत्र, जलाईु 30 2026 113 (iii) in sub-rule (5), for the existing expression "Legal Metrology Officer", the expression "the Legal Metrology Officer or Government Approved Test Centre, as the case may be," shall be substituted.
7. Amendment of rule 16.- In rule 16 of the said rules,-
(i) in sub-rule (2), for the existing expression "verification is done", the expression "verification is done by the Legal Metrology Officer" shall be substituted;
(ii) the existing sub-rule (4) shall be substituted by the following, namely:-
"(4) No weight or measure held in stock by a manufacturer or dealer shall required to be re-stamped, if the original stamp has not been obliterated and such weight or measure conforms to the standards established under the Act and the rules made thereunder:
Provided that where any such weight or measure is presented to the Legal Metrology Officer or the Government Approved Test Centre for re- stamping, full fee shall be payable." ; and
(iii) the existing sub-rule (5) shall be substituted by the following, namely:-
"(5) If any weight or measure presented to the Legal Metrology Officer or Government Approved Test Centre for verification is found to be incorrect, it shall be returned to the person concerned for adjustment, informing him, in such form as may be specified by the Controller, of the defects found therein and requiring him to remove such defects within a period not exceeding seven days. After carrying out the necessary adjustment, such weight or measure shall be presented again before the Legal Metrology Officer or Government Approved Test Centre, as the case may be, for re-verification within the aforesaid period.
The fee payable for such re-verification shall be as specified,-
(a) in Schedule-IX, where re-verification is carried out by the Legal
Metrology Officer; and
(b) in rules made under the Act for notifying Government Approved
Test Centre, where re-verification is carried out by the Government
Approved Test Centre."114 राजस्थान राज-पत्र, जलाईु 30, 2026 भाग 4 (ग) 8. Substitution of rule 17.- The existing rule 17 of the said rules shall be
substituted by the following, namely:-
"17. Deposition of fees and remittance into the Treasury.- (1) Subject to the provisions of these rules, where any weight or measure is required to be verified and stamped, the fee payable shall be deposited in the appropriate Head of Account through eGRAS or Revenue Management System of Integrated Financial Management System or any other manner as specified
by the State Government:
Provided that fees payable by a department of the Central or State Government under these rules may be realized through the State Treasury or in
such manner as may be directed by the Controller.
(2) The fee collected under sub-rule (1), including the compounding and any other fee, shall be recorded or registered in such manner as may be
specified by the Controller.
(3) All fees, including compounding fees and other fee, prescribed under these rules shall be remitted directly to the Government Treasury under the appropriate Head of Account through eGRAS or Revenue Management System of Integrated Financial Management System or any other manner as specified by the State Government and a record of such remittance shall be maintained and made available to the Controller or such officer as may be
authorized by him.
(4) The challan generated upon deposit of fees through eGRAS or Revenue Management System of Integrated Financial Management System or any other manner as specified by the State Government shall be defaced or
cancelled electronically, so as to prevent its reuse."
9. Amendment of rule 18.- The existing sub-rule (1) of rule 18 of the said rules shall be substituted by the following, namely:-
"(1) Any unverified weight or measure seized under sub-section (1) of section 15 of the Act shall be returned to the person from whom such weight or measure was seized, if such person gets the same verified and stamped within a period of ten days or such extended period, as the Controller may specify, from the date of its return, upon payment of the fee payable for verification including
additional fee payable for re-verification undertaken after expiry of the validity
period of the stamp."
10. Amendment of rule 19.- In rule 19 of the said rules,-भाग 4 (ग) राजस्थान राज-पत्र, जलाईु 30 2026 115 (i) in sub-rule (2),-
(a) in first proviso, for the existing expression "dismantled and re-installed
at", the expression "dismantled and re-installed at the same or" shall be substituted; and
(b) after the existing first proviso, the following new proviso shall be added,
namely:–
"Provided further that, in respect of weight or measure held in stock by a manufacturer or dealer, the validity period of the verification certificate of such weight or measure shall be reckoned from the date of issue of the verification certificate or the date of invoice relating to such weight or measure, whichever is later, if the original stamp has not been obliterated and such weight or measure conforms to the standards
established under the Act and rules made thereunder."; and
(ii) in sub-rule (3), the existing expression "whether by a licenced repaired or by
the person owning and possessing the same," shall be deleted.
11. Amendment of rule 21.- In sub-rule (5) of rule 21 of the said rules, for the
existing expression "verified by Legal Metrology Officer", the expression "verified by the
Legal Metrology Officer or Government Approved Test Centre, as the case may be" shall be
substituted.
12. Amendment of rule 23.- In rule 23 of the said rules for the existing expression
"punished with fine, which may extend to five thousand rupees.", the expression "liable to pay penalty, as specified by the Controller, which may extend to one lakh rupees and suspension,
13. Substitution of SCHEDULE–II–A.- The existing SCHEDULE–II–A appended to the said rules shall be substituted by the following, namely:-
"SCHEDULE–II [see rule 11(1)]
Form LM-1 [Application for registration as manufacturer of weight & measure under the Legal Metrology
Act, 2009]
To,
…………..
1. Name of the manufacturer. ………………………………
2.
(a) Complete address of the establishment. ………………………………
(b) Whether the premises are owned, rented,
leased, or occupied under any other116 राजस्थान राज-पत्र, जलाईु 30, 2026 भाग 4 (ग) arrangement, duly supported by relevant documentary evidence.
……………………………....
3. Date of establishment of workshop/factory. ………………………………
4. Name(s), father's/husband's name and address(es) of
the proprietor(s) and/or Partners and Managing
Director(s) in the case of Limited company.
………………………………
5. Date and current registration number of factory
/shop/establishment/Municipal Trade registration. ………………………………
6. Nature of manufacturing activities presently being
carried out.
………………………………
7. Type(s) of weights and measures proposed to be
manufactured, with details of each:
(i) Weights
(ii) Measures
(iii) Weighing Instruments
(iv) Measuring Instruments
………………………………
8. The number of persons employed/ proposed to be
employed-
(i) Skilled
(ii) Semi-skilled
(iii) Unskilled
(iv) Specialists trained in the relevant field ………………………………
9. The monogram or trademark proposed to be
imprinted on the weights and measures to be ………………………………
manufactured.
10. Details of machinery, tools, equipment and
accessories owned and used for the manufacture of
weights and measures.
………………………………
11.
(a) Details of foundry/workshop facilities
available.
………………………………
(b) Indicate whether such facilities are owned,
held under a long-term lease, or otherwise
arranged.
………………………………
12. Facilities available for steel casting, hardness testing
of critical components, or any other equivalent
arrangements.
………………………………
13. Availability of electrical power/energy. ………………………………
14. Details of any loan received from the Government or
any financial institution. If applicable, provide
complete particulars.
………………………………
15. Name and address of the banker, if any. ………………………………
16. GSTIN duly supported by relevant documents. ………………………………
17. (a) Whether the applicant has previously applied
for a Manufacturer's Licence or registration. ………………………………
भाग 4 (ग) राजस्थान राज-पत्र, जलाईु 30 2026 117(b) If yes, provide details including the date of
application and its outcome.
………………………………
18.
(a) Whether the weights and measures proposed
to be manufactured will be sold within the
State, outside the State or both.
………………………………
(b) Details of Model Approval obtained from the
Government of India, duly supported by
relevant documents.
………………………………
Self-declaration to be furnished by the applicant(s)
I/We hereby declare that,-
1. I/We have read the Legal Metrology Act, 2009 and the Rajasthan Legal Metrology (Enforcement) Rules, 2011 and agree to abide by the same and also the administrative orders and instructions issued or to be issued thereunder.
2. I/We agree to deposit the Scheduled registration fees with Government as soon as required to do so by the Registering Authority.
3. The information furnished in this application and the documents uploaded/submitted therewith are true, complete and correct to the best of my/our knowledge and belief.
4. I/We possess and maintain the requisite premises, machinery, tools, testing facilities, technical manpower and other infrastructure required for carrying out the activities for which registration is sought.
5. I/We understand that the Registration Certificate is being issued on the basis of this self- declaration and thereafter the Controller or Legal Metrology Officer may conduct inspection at any time to verify the correctness of the particulars furnished.
6. I/We further understand that if any information furnished by me/us is found to be false, misleading or suppressed, the Registration Certificate shall be liable to suspension or cancellation, without prejudice to any other action under the Legal Metrology Act, 2009 and the rules made thereunder.
Place:………. …………………………. Date:……….. Signature
Form LR-1 [Application for registration as repairer of weights & measures under the Legal Metrology Act, 2009]
To, …………..
1. Name of the repairer. ………………………………
2.
(a) Complete address of the establishment. ………………………………
(b) Whether the premises are owned, rented,
leased, or occupied under any other
arrangement, duly supported by relevant
documentary evidence.
………………………………
3. Date of establishment of workshop. ………………………………
118 राजस्थान राज-पत्र, जलाईु 30, 2026 भाग 4 (ग) 4. Name(s), father's/husband's name and address(es) ofthe proprietor(s) and/or Partners and Managing
Director(s) in the case of Limited company.
………………………………
5. Date and current registration number of factory
/shop/establishment/Municipal Trade registration. ………………………………
6. Type(s) of weights and measures proposed to be
repaired, with details of each:
(i) Weights
(ii) Measures
(iii) Weighing Instruments
(iv) Measuring Instruments
………………………………
7. The number of persons employed/ proposed to be
employed-
(i) Skilled
(ii) Semi-skilled
(iii) Unskilled
(iv) Specialists trained in the relevant
field
………………………………
8. Area or jurisdiction within which the applicant
intends to carry out repair activities.
………………………………
9. Details of previous experience in the relevant field,
duly supported by relevant documents.
………………………………
10. Details of machinery, tools, equipment and
accessories owned and used for the repair of weights
and measures.
………………………………
11.
(a) Details of foundry/workshop facilities
available.
………………………………
(b) Indicate whether such facilities are owned,
held under a long-term lease, or otherwise
arranged.
………………………………
12. Availability of electrical power/energy. ………………………………
13. GSTIN duly supported by relevant documents. ………………………………
14.
(a) Do you possess aequate Loan Sets/ Test
Weights, Test Measures and other standard
equipment required for testing, calibration,
adjustment and repair of the weights,
measures, weighing instruments and
measuring instruments specified in the
application?
………………………………
(b) If yes, furnish complete details thereof. ………………………………
15.
(a) Whether the applicant has previously applied
for a Repairer's Licence or registration.
………………………………
(b) If yes, provide details, including the date of
application and the outcome thereof.
………………………………
भाग 4 (ग) राजस्थान राज-पत्र, जलाईु 30 2026 119Self-declaration to be furnished by the applicant(s)
I/We hereby declare that,-
1. I/We have read the Legal Metrology Act, 2009 and the Rajasthan Legal Metrology (Enforcement) Rules, 2011 and agree to abide by the same and also the administrative orders and instructions issued or to be issued thereunder.
2. I/We agree to deposit the Scheduled registration fees with Government as soon as required to do so by the Registering Authority.
3. I/We agree to deposit and maintain the security deposit, as prescribed under the Rajasthan Legal Metrology (Enforcement) Rules, 2011, with Government as soon as required to do so by the Registering Authority.
4. The information furnished in this application and the documents uploaded/submitted therewith are true, complete and correct to the best of my/our knowledge and belief.
5. I/We possess and maintain the requisite premises, machinery, tools, testing facilities, technical manpower and other infrastructure required for carrying out the activities for which registration is sought.
6. I/We understand that the Registration Certificate is being issued on the basis of this self-declaration and thereafter the Controller or Legal Metrology Officer may conduct inspection at any time to verify the correctness of the particulars furnished.
7. I/We further understand that if any information furnished by me/us is found to be false, misleading or suppressed, the Registration Certificate shall be liable to suspension or cancellation, without prejudice to any other action under the Legal Metrology Act, 2009 and the rules made thereunder.
Place:………. ………………………….
Date:……….. Signature
Form LD-1 [Application for registration as dealer of weights & measures under the Legal Metrology Act,
2009]
To,
…………..
1. Name of the dealer. ……………………………...
2.
(a) Complete address of the establishment. ……………………………...
(b) Whether the premises are owned, rented,
leased, or occupied under any other
arrangement, duly supported by relevant ……………………………...
documentary evidence.
3. Date of establishment of the business. ……………………………...
4. Name(s), father's/husband's name and address(es) of
the proprietor(s) and/or Partners and Managing
Director(s) in the case of Limited company.
……………………………...
5. Date and current registration number of factory120 राजस्थान राज-पत्र, जलाईु 30, 2026 भाग 4 (ग) /shop/establishment/Municipal Trade registration. ……………………………... 6. Type(s) of weights and measures proposed to be sold, with details of each:
(i) Weights
(ii) Measures
(iii) Weighing Instruments
……………………………...
(iv) Measuring Instruments
7. GSTIN duly supported by relevant documents. ……………………………...
8. Details of manufacturer along with Registration
Certificate and Letter of Intent or authorization letter
or any other document issued by the manufacturer in
support of the dealership,-
(i) Name of manufacturer
(ii) Complete Address of the manufacturer
(iii) Manufacturer's Registration Number
(iv) Manufacturer's trademark/monogram
……………………………...
(v) Type of weights or measures to be supplied
by the Manufacturer
9.
(a) Whether the applicant intends to import
weights, measures, weighing instruments, or ……………………………...
measuring instruments from outside India.
(b) If yes, furnish the following details:
(i) Source(s) of supply, including the
manufacturer's name, trademark/
monogram, and registration number
(ii) Registration details of Importer of such
weights and measures
(iii) Details of Model Approval obtained ……………………………...
from the Government of India, duly
supported by relevant documents.
10.
(a) Whether the applicant has previously applied
for a Dealer's Licence or registration, either in ……………………………...
this State or elsewhere.
(b) If yes, provide details including the date of
application and its outcome.
……………………………...
11. Whether the applicant intends to sell, or offer, expose
or possess for sale weight or measure manufactured
in any other State. If yes, furnish complete details of ……………………………...
the manufacturer(s).
Self-declaration to be furnished by the applicant(s)
I/We hereby declare that,-भाग 4 (ग) राजस्थान राज-पत्र, जलाईु 30 2026 121 1. I/We have read the Legal Metrology Act, 2009 and the Rajasthan Legal Metrology (Enforcement) Rules, 2011 and agree to abide by the same and also the administrative orders and instructions issued or to be issued thereunder.
2. I/We agree to deposit the Scheduled registration fees with Government as soon as required to do so by the Registering Authority.
3. The information furnished in this application and the documents uploaded/submitted therewith are true, complete and correct to the best of my/our knowledge and belief. 4. I/We possess and maintain the requisite premises, machinery, tools, testing facilities, technical manpower and other infrastructure required for carrying out the activities for which registration is sought.
5. I/We understand that the Registration Certificate is being issued on the basis of this self-declaration and thereafter the Controller or Legal Metrology Officer may conduct inspection at any time to verify the correctness of the particulars furnished.
6. I/We further understand that if any information furnished by me/us is found to be false, misleading or suppressed, the Registration Certificate shall be liable to suspension or cancellation, without prejudice to any other action under the Legal Metrology Act, 2009 and the rules made thereunder.
Place:………. …………………………. Date:……….. Signature"
14. Deletion of SCHEDULE-II-B.- The existing SCHEDULE-II-B appended to the said rules shall be deleted.
15. Substitution of SCHEDULE–III.- The existing SCHEDULE–III appended to the said rules shall be substituted by the following, namely:-
"SCHEDULE–III
[see rule 11(3)]
Registration Certificate
Form LM-3
Government of Rajasthan
OFFICE OF THE CONTROLLER LEGAL METROLOGY
Registration Certificate to manufacture weights, measures, weighing instruments or measuring instruments. Registration No. …………. Year…...................
1. I, Controller Legal Metrology, hereby issue this Registration Certificate to ………….. (Name and Address of the applicant) for the manufacture of the following:-
(Specify the details of the weights, measures, weighing instruments, or measuring instruments authorized to be manufactured).
2. The Registration Certificate is issued to the party named above in respect of his workshop located at …………………….
3. This Registration Certificate shall be effective from ………………..
4. The manufacturer shall comply with the conditions noted below. Failure to comply with any of these conditions may render this Registration Certificate liable to suspension or cancellation.
5. The trademark/ monogram being used by the manufacturer is as follows:
122 राजस्थान राज-पत्र, जलाईु 30, 2026 भाग 4 (ग) (Seal) ……………………….Date: …………. (Signature)
Place: ………… Controller Legal Metrology Rajasthan
Note: In the case of a partnership firm, the name of the firm together with the names of all partners having an interest in the business shall be specified in Paragraph 1.
Conditions of Registration
1. The person in whose favour this Registration Certificate has been issued shall,-
(a) comply with all relevant provisions of the Act and rules made thereunder, as amended from time to time;
(b) not encourage or countenance any infringement of the provisions of the Act and rules made thereunder, as amended from time to time; (c) display this Registration Certificate in a conspicuous place at the premises to which it relates;
(d) comply with any general or special directions that may be given by the Controller Legal Metrology;
(e) surrender the Registration Certificate in the event of closure of business and/or suspension or cancellation of Registration; and
(f) present the weights, measures, weighing or measuring instruments, as the case may be, manufactured and meant for use within State, to the Legal Metrology Officer or Government Approved Test Centre, as the case may be, for verification and stamping before sale.
2. Every condition prescribed after the issuance of this Registration Certificate shall, upon publication in the Official Gazette, be deemed to form part of this Registration Certificate and shall be binding upon the person to whom the Registration Certificate has been issued.
Registration Certificate
Form LR-3
Government of Rajasthan
OFFICE OF THE CONTROLLER LEGAL METROLOGY
Registration Certificate to repair weights, measures, weighing
instruments or measuring instruments.
Registration No. …………. Year…...................
1. I, Controller Legal Metrology, hereby issue this Registration Certificate to ………….. (Name and Address of the applicant) to repair the following:-
(Specify the details of the weights, measures, weighing instruments, or measuring instruments authorized to be repaired).
भाग 4 (ग) राजस्थान राज-पत्र, जलाईु 30 2026 1232. The Registration Certificate is issued to the party named above in respect of his workshop located at …………………….
3. This Registration Certificate shall be effective from ………………..
4. The repairer shall comply with the conditions noted below. Failure to comply with any of these conditions may render this Registration Certificate liable to suspension or cancellation.
5. The repairer is authorized to undertake repair activities within the following area(s)/jurisdiction(s):
(Seal) ……………………….
Date: …………. (Signature)
Place: ………… Controller Legal Metrology Rajasthan
Note: In the case of a partnership firm, the name of the firm together with the names of all partners having an interest in the business shall be specified in Paragraph 1.
Conditions of Registration
1. The person in whose favour this Registration Certificate has been issued shall,-
(a) comply with all relevant provisions of the Act and rules made thereunder, as amended from time to time;
(b) not encourage or countenance any infringement of the provisions of the Act and rules made thereunder, as amended from time to time;
(c) display this Registration Certificate in a conspicuous place at the premises to which it relates;
(d) comply with any general or special directions that may be given by the Controller Legal Metrology;
(e) surrender the Registration Certificate in the event of closure of business and/or suspension or cancellation of Registration;
(f) present all repaired weights, measures, weighing instruments, or measuring instruments to the Legal Metrology Officer or Government Approved Test Centre, as applicable, for verification and stamping in accordance with sub-rule (1) of rule 14 before their return or delivery to the user; and
(g) where any weight, measure, weighing instrument, or measuring instrument is serviced or repaired before the expiry of its validity period for verification, and the verification stamp affixed by the Legal Metrology Officer or Government Approved Test Centre is defaced, removed, altered, or broken in the course of such servicing or repair, present the same to the Legal Metrology Officer or Government Approved Test Centre, as applicable, for re-verification and stamping before its return or delivery to the user.
2. Every condition prescribed after the issuance of this Registration Certificate shall, upon publication in the Official Gazette, be deemed to form part of this Registration Certificate and shall be binding upon the person to whom the Registration Certificate has been issued.
124 राजस्थान राज-पत्र, जलाईु 30, 2026 भाग 4 (ग) Registration Certificate Form LD-3Government of Rajasthan
OFFICE OF THE CONTROLLER LEGAL METROLOGY
Registration Certificate to a dealer in weights, measures,
weighing instruments or measuring instruments.
Registration No. …………. Year…...................
1. I, Controller Legal Metrology, hereby issue this Registration Certificate to ………….. (Name and Address of the applicant) to deal in the following:-
(Specify the details of the weights, measures, weighing instruments, or measuring instruments authorized to be dealt in).
2. The Registration Certificate is issued to the party named above in respect of the business premises situated at …………………….
3. This Registration Certificate shall be effective from ………………..
4. The dealer is authorized to deal in the above mentioned weights or measures manufactured by…………………. (Name and Address of the Manufacturer) holding Registration Certificate No. ………………….(Registration Certificate Number of the Manufacturer) and using the following trademark/monogram:
5. The dealer shall comply with the conditions noted below. Failure to comply with any of these conditions may render this Registration Certificate liable to suspension or cancellation.
(Seal) ……………………….
Date: …………. (Signature)
Place: ………… Controller Legal Metrology Rajasthan
Note: In the case of a partnership firm, the name of the firm together with the names of all partners having an interest in the business shall be specified in Paragraph 1.
Conditions of Registration 1. The person in whose favour this Registration Certificate has been issued shall,-
(a) comply with all relevant provisions of the Act and rules made thereunder, as amended from time to time;
(b) not encourage or countenance any infringement of the provisions of the Act and rules made thereunder, as amended from time to time; (c) display this Registration Certificate in a conspicuous place at the premises to which it relates;
(d) comply with any general or special directions that may be given by the Controller Legal Metrology;
(e) surrender the Registration Certificate in the event of closure of business and/or suspension or cancellation of Registration; andभाग 4 (ग) राजस्थान राज-पत्र, जलाईु 30 2026 125 (f) not sell or offer, expose or possess for sale any non-standard weight or measure.
2. Every condition prescribed after the issuance of this Registration Certificate shall, upon publication in the Official Gazette, be deemed to form part of this Registration Certificate and shall be binding upon the person to whom the Registration Certificate has been issued."
16. Substitution of SCHEDULE–IV.- The existing SCHEDULE–IV appended to the said rules shall be substituted by the following, namely:-
"SCHEDULE–IV
[see rule 11(5)]
Registration fee for manufacturers, repairers and dealers of
weights and measures
The following fee shall be payable for issue of a Registration Certificate to,- (i) Manufacturer Rs. 25,000/-
(ii) Repairer Rs. 10,000/- (iii) Dealer Rs. 10,000/-"
17. Substitution of SCHEDULE–V.- The existing SCHEDULE–V appended to the said rules shall be substituted by the following, namely:-
"SCHEDULE-V
[see rule 11(6)]
Government of Rajasthan
OFFICE OF THE CONTROLLER LEGAL METROLOGY
(i) Register of registered manufacturers of weights, measures, weighing or measuring instruments
| Registration Number | Date of Issue | Manufacturer Address of the Name and Complete | /factory is situated Place where workshop | Articles to be Manufactured | being used Trademark/ Monogram | Cancellation of Orders Regarding Registration Certificate | Result of Appeal | Authority Signature of Competent | Remark |
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 |
(ii) Register of registered repairers of weights, measures, weighing or measuring instruments
Office of ………………………
| Registration Number | Date of Issue | Name and Complete Address of the repairer | /factory is situated Place where workshop | Articles to be Manufactured | Cancellation of Orders Regarding Registration Certificate | Result of Appeal | Signature of Competent Authority | Remark |
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
(iii) Register of registered dealers of weights, measures, weighing or measuring instruments
Office of ………………………
| Registration Number | Date of Issue | Name and Complete Address of the dealer | Articles to be Manufactured | Certificate Registration Cancellation of Orders Regarding | Result of Appeal | Signature of Competent Authority | Remark |
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
18. Amendment of SCHEDULE–VI.- In SCHEDULE–VI appended to the said rules, for the existing expression "licencee", the expression "registered" shall be substituted.
19. Substitution of SCHEDULE–VII.- The existing SCHEDULE–VII appended to the said rules shall be substituted by the following, namely:-
"SCHEDULE–VII
[see rule 13]
Form LM-4
Register to be maintained by the manufacturers of weights and measures
1. Name and address of the manufacturer …………………………………..
2. Description of the weight or measure …………………………………….
3. (i) Registration Certificate No. ………………..............................................
(ii) Date on which Registration Certificate was issued ……………………..
4. Particulars of order, if any, suspending or revoking the Registration Certificate………………………………………………………………....
भाग 4 (ग) राजस्थान राज-पत्र, जलाईु 30 2026 127| S. No. | Month | month Unsold stock from previous | the month Quantity manufactured during | Total (3+4) | Sold within the State | Sold outside the State | Total sold (6+9) | Balance (5-11) | Remarks | |||
| No. of item sold | and date Dispatch voucher no. | Name of the State | No. of item sold | and date Dispatch voucher no. | ||||||||
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 |
Form LR-4 Register to be maintained by the repairer in respect of weights and measures
1. Name and address of the repairer ………………………………………...
2. Description of the weight or measure ……………………………………
3. (i) Registration Certificate No. ………………..............................................
(ii) Date on which Registration Certificate was issued ……………………..
4. Particulars of order, if any, suspending or revoking the Registration Certificate…………………………………………………………………
| S. No. | Date | whom received Name of the user from | booked for repair Items and their Nos. | issue to the user Receipt No. and date of | charges Amount of repairing | fee Amount of verification | Total amount charged | user Date of return to the | Remarks |
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 |
Form LD-4 Register to be maintained by dealer in weights and measures
1. Name and address of the dealer …………………………………..
2. Description of the weight or measure …………………………………….
3. (i) Registration Certificate No. ………………..............................................
128 राजस्थान राज-पत्र, जलाईु 30, 2026 भाग 4 (ग) (ii) Date on which Registration Certificate was issued ……………………..4. Particulars of order, if any, suspending or revoking the Registration Certificate………………………………………………………………....
5. Category of weight or measure (Category A or B) ………………………...
| S. No. | Month | previous month Unsold stock from the | during the month Bought from within the State | State during the month Bought from outside the | Total (3+4+5) | Sold within the State | Sold outside the State | Total sold (7+10) | Balance (6-12) | Remarks | |||
| No. of item sold | and date Dispatch voucher no. | Name of the State | No. of item sold | and date Dispatch voucher no. | |||||||||
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 |
20. Amendment of SCHEDULE–VIII.- In SCHEDULE–VIII appended to the said rules, for the existing expression "T. Receipt/ Money receipt .No.", the expression "GRN/CIN No." shall be substituted.
21. Substitution of Schedule–IX.- The existing Schedule–IX appended to the said rules shall be substituted by the following, namely:-
"SCHEDULE-IX
[see rule 16(1)]
Fee payable for verification and stamping of Weight or Measure
1. Weights-
(a) Bullion Weights:
| Denomination (1) | Fee per piece (Rs.) (2) |
| 10 kg | 60 |
| 5 kg | 40 |
| 2 kg | 40 |
| 1 kg | 40 |
| 1g to 500 g | 30 |
(b) Carat Weights:
भाग 4 (ग) राजस्थान राज-पत्र, जलाईु 30 2026 129| Denomination (1) | Fee per piece (Rs.) (2) |
| 1 mg (0.005c) to 100g (500 c) | 40 |
(c) Cylindrical knob type weights (Including Brass Weights):
| Denomination (1) | Fee per piece (Rs.) (2) |
| 10 kg | 40 |
| 5 kg | 40 |
| 2 kg | 40 |
| 1 kg | 40 |
| 1g to 500 g | 20 |
| Bullion Weights | |
| 1 mg to 500 mg | 20 |
| 50 kg | 50 |
| 20 kg | 40 |
| 10 kg | 40 |
| 5 kg | 40 |
| 2 kg | 30 |
| 1 kg | 20 |
| 1 g to 500 g | 10 |
(f) Standard weights for testing of high capacity weighing machines:
| Denominations (1) | Fee corresponding to Max permissible relative error 0.5/10000 in Rs. (2) | Fee corresponding to Max permissible relative error 3.3/10000, 1.7/10000 and 1.0/10000 in Rs. (3) | NaN |
| 100kg | 150 | 100 | NaN |
| 200kg | 300 | 200 | NaN |
| 500kg | 600 | 400 | NaN |
| 1000kg | 1500 | 1000 | NaN |
| 2000kg | 3000 | 2000 | NaN |
| 5000kg | 6000 | 4000 | NaN |
| Denomination (1) | Fee per piece (Rs.) (2) | NaN | |
| 100 litre and above | Rs. 114 for the 1st 100 litre plus Rs. 14 for every additional 100 litre or part thereof | NaN | |
| 50 l | 100 | NaN | |
| 20 l | 40 | NaN | |
| 10 l | 40 | NaN | |
| 5 l | 40 | NaN | |
| 2 l | 40 | NaN | |
| 1 l | 40 | NaN | |
| 1 ml to 500 ml | 20 | NaN |
3. Liquor Measures:
Rs. 100 per unit
4. Length Measures-
| Denomination (1) | Fee per piece (Rs.) (2) |
| 2 m. | 20 |
| 1 m. | 20 |
| 0.6 m. | 40 |
| 1 m graduated (at every cm) | 40 |
| 0.5 m graduated (at every cm) | 40 |
(b) Folding Scales:
Rs. 20 per piece
| Accuracy Class (1) | Fee per metre in Rs. (2) |
| Class-I | 20 |
| Class-II | 20 |
| Class-III | 10 |
(d) Surveying Chains: Rs. 200 per piece
5. Beam Scales-
(a) Class A & B:
भाग 4 (ग) राजस्थान राज-पत्र, जलाईु 30 2026 131| Capacity (1) | Fee per piece (Rs.) (2) |
| 200 kg | 800 |
| 100 kg | 600 |
| 50 kg | 300 |
| 20 kg | 300 |
| 10 kg | 300 |
| 5 kg | 200 |
| 2 kg | 200 |
| 1 kg | 200 |
| 500 g and below | 120 |
| 1000 kg | 400 |
| 500 kg | 400 |
| 300 kg | 400 |
| 200 kg | 200 |
| 100 kg | 200 |
| 50 kg | 40 |
| 20 kg | 40 |
| 10 kg | 40 |
| 5 kg | 30 |
| 2 kg | 30 |
| 1 kg | 30 |
| 500 g and below | 20 |
| Capacity (1) | Fee in Rs. (2) |
| Up to 10 kg | 40 |
| Above 10 kg | 100 |
7. Non-Automatic Weighing Instruments-
(a) Mechanical (analogue) Class III & IIII:
| Capacity (1) | Fee per piece (Rs.) (2) |
| 400 t | 8000 |
| 300 t | 6000 |
| 200 t | 6000 |
| 150 t | 4000 |
| 100 t | 4000 |
| 80 t | 4000 |
| 60 t | 4000 |
| 50 t | 4000 |
| 40 t | 4000 |
| 30 t | 4000 |
| 25 t | 4000 |
| 20 t | 4000 |
| 15 t | 4000 |
| 10 t | 2000 |
| 5 t | 1000 |
| 3 t | 800 |
| 2 t | 800 |
| 1500 kg | 600 |
| 1000 kg | 600 |
| 500 kg | 600 |
| 300 kg | 400 |
| 250 kg | 400 |
| 200 kg | 200 |
| 150 kg | 200 |
| 100 kg | 200 |
| 50 kg | 200 |
| 30 kg | 200 |
| 25 kg | 120 |
| 20 kg | 120 |
| 15 kg | 60 |
| 10 kg | 60 |
| 5 kg | 60 |
| 3 kg | 60 |
| 2 kg | 60 |
| 1 kg | 30 |
| 500 g. and below | 30 |
(b) Electronic Class III & IIII:
| Capacity (1) | Fee per piece (Rs.) (2) |
| 400 t | 8000 |
| 300 t | 6000 |
| 200 t | 6000 |
| 150 t | 4000 |
| 100 t | 4000 |
| 80 t | 4000 |
| 60 t | 4000 |
| 50 t | 4000 |
| 40 t | 4000 |
| 30 t | 4000 |
| 25 t | 4000 |
| 20 t | 4000 |
| 15 t | 4000 |
| 10 t | 2000 |
| 5 t | 2000 |
| 3 t | 1000 |
| 2 t | 1000 |
| 1500 kg | 500 |
| 1000 kg | 500 |
| 500 kg | 500 |
| 300 kg | 400 |
| 250 kg | 400 |
| 200 kg | 400 |
| 150 kg | 400 |
| 100 kg | 400 |
| 50 kg | 400 |
| 30 kg | 400 |
| 25 kg | 400 |
| 20 kg | 200 |
| 15 kg | 200 |
| 10 kg | 200 |
| 5 kg | 200 |
| 3 kg | 200 |
| 2 kg | 200 |
| 1 kg | 200 |
| 500 g. and below | 200 |
(c) Both mechanical and electronic class I & II:
| Capacity (1) | Fee (Rs.) (2) |
| Exceeding 50 t | 6000 |
| Not exceeding 50t but exceeding 10t | 4000 |
| Not exceeding 10t but exceeding 1t | 2000 |
| Not exceeding 1t but exceeding 50kg | 1000 |
| Not exceeding 50kg but exceeding 10kg | 600 |
| Not exceeding 10kg | 400 |
| Capacity (1) | Fee in Rs. (2) |
| Exceeding 100 t | 8000 |
| Not exceeding 100t but exceeding 50t | 6000 |
| Not exceeding 50t but exceeding 10t | 4000 |
| Not exceeding 10t but exceeding 1t | 2000 |
| Not exceeding 1t but exceeding 50kg | 1000 |
| Not exceeding 50kg but exceeding 10kg | 500 |
| Not exceeding 10kg | 400 |
9. Volumetric measuring instruments-
(a) Dispensing pumps each pump Rs. 2000 per unit
(b) Totalizing counter Rs. 1000 per unit
(c) Other volumetric measuring instruments:
| Capacity (1) | Fee in Rs. (2) |
| Exceeding 100 litre | Rs. 1000 for the 1st 100 liters plus Rs. 500 for every additional 100 liters or part thereof |
| Not exceeding 100 litre but exceeding 50 litre | 1000 |
| Not exceeding 50 litre but exceeding 20 litre | 500 |
| Not exceed 20 litre | 400 |
| Flow rate up to 100 litre/ min. | 4000 |
| Above 100 litre/ min upto 500 litre/ min | 6000 |
| Above 500 litre /min. | 10000 |
11. Water meter:
Rs. 50 per unit
| Taxi, Auto-rickshaw meters | 200 |
| Other meters | Rs.100 for the 1st 1000 m or part thereof Plus Rs. 10.00 for every additional 100 m or part thereof |
13. Clinical Thermometer: Rs. 1.00 per unit
14. CNG Dispensers : Rs. 2000.00 each nozzle
15. LPG Dispensers : Rs. 2000.00 each nozzleभाग 4 (ग) राजस्थान राज-पत्र, जलाईु 30 2026 135 22. Substitution of SCHEDULE–XI.- The existing SCHEDULE -XI appended to the said rules shall be substituted by the following, namely:-
"SCHEDULE-XI
[see rule 25]
| S. No. | Nature of offence | Penal section of the Act or rule of these rules | Amount of Compounding Fees (in Rs.) |
| 1 | 2 | 3 | 4 |
| 1. | Use of or keep for use non-standard weight or measure or make use of non-standard numeral. | section 25 | for 2nd offence, in case of,- (i) Hawker/non-permanent establishment - Rs. 150/- (ii) Retailer- Rs.5,000/- (iii) Wholesale dealer- Rs 10,000/- (iv) Manufacturer/Packer/Importer- Rs. 25,000/- (v) Petroleum Industry (Retail Outlet/ Tank Lorry/ Storage Depot etc.)- Rs. 50,000/- (vi) Others- Rs.25,000/- for 3rd offence and subsequent Offence, in case of,- (i) Hawker/non-permanent establishment - Rs. 2,00,000/- (ii) Retailer- Rs. 2,50,000/- (iii) Wholesale dealer- Rs 3,00,000/- (iv) Manufacturer/Packer/Importer- Rs.3,50,000/- (v) Petroleum Industry (Retail Outlet/ Tank Lorry/ Storage Depot etc.)- Rs.5,00,000/- (vi) Others - Rs.3,50,000/- |
| 2. | (i) Tampering or alteration of Reference or Secondary or Working Standard. (ii) Increase or Decrease or Alteration of any weight or measure with a view to deceive any person. | section 26 | for 1st offence, in case of,- (i) Hawker/non-permanent establishment - Rs. 500/- (ii) Retailer- Rs. 5,000/- (iii) Wholesale dealer- Rs 10,000/- (iv) Manufacturer/Packer/Importer- Rs.25,000/- (v) Petroleum Industry (Retail Outlet/ Tank Lorry/ Storage Depot etc.)- Rs.50,000/- |
| (vi) Others - Rs.25,000/- for 2nd offence, in case of,- (i) Hawker/non-permanent establishment - Rs. 1,000/- (ii) Retailer- Rs. 10,000/- (iii) Wholesale dealer- Rs.25,000/- (iv) Manufacturer/Packer/Importer- Rs. 50,000/- (v) Petroleum Industry (Retail Outlet/ Tank Lorry/ Storage Depot etc.)- Rs.1,00,000/- (vi) Others - Rs.50,000/- | |||
| 3. | (i) Manufacture or sale of non-standard Weight or Measure. (ii) Manufacture or sale of weight or measure which bears thereon any non-standard inscription of weight, measure or number. | section 27 | for 2nd offence, in case of,- (i) Dealer / Seller - Rs.25,000/- (ii) Manufacturer- Rs.50,000/- for 3rd offence and subsequent offence, in case of,- (i) Dealer / Seller - Rs.2,00,000/- (ii) Manufacturer- Rs.3,50,000/- |
| 4. | Transaction, Deal, or Contract in contravention of the standards of weights and measures specified under section 10 of the Act. | section 28 | for 2nd offence, in case of,- (i) Hawker/non-permanent establishment - Rs. 500/- (ii) Retailer- Rs. 5,000/- (iii) Wholesale dealer- Rs.10,000/- (iv) Manufacturer/Packer/Importer- Rs.25,000/- (v) Petroleum Industry (Retail Outlet/ Tank Lorry/ Storage Depot etc.)- Rs.50,000/- (vi) Others - Rs.25,000/- for 3rd offence and subsequent offence, in case of,- (i) Hawker/non-permanent establishment - Rs. 1,00,000/- (ii) Retailer- Rs.1,15,000/- (iii) Wholesale dealer- Rs 1,30,000/- (iv) Manufacturer/Packer/Importer- |
| Rs.1,50,000/- (v) Petroleum Industry (Retail Outlet/ Tank Lorry/ Storage Depot etc.)- Rs.2,00,000/- (vi) Others- Rs.1,50,000/- | |||
| 5. | Violation of section 11 of the Act | section 29 | for 2nd offence, in case of,- (i) Hawker/non-permanent establishment - Rs. 500/- (ii) Retailer- Rs. 5000/- (iii) Wholesale dealer- Rs.10,000/- (iv) Manufacturer/Packer/Importer- Rs.25,000/- (v) Petroleum Industry (Retail Outlet/ Tank Lorry/ Storage Depot etc.)- Rs.50,000/- (vi) Others - Rs.25,000/- for 3rd offence and subsequent offence, in case of,- (i) Hawker/non-permanent establishment - Rs. 1,00,000/- (ii) Retailer- Rs.1,15,000/- (iii) Wholesale dealer- Rs 1,30,000/- (iv) Manufacturer/Packer/Importer- Rs.1,50,000/- (v) Petroleum Industry (Retail Outlet/ Tank Lorry/ Storage Depot etc.)- Rs.2,00,000/- (vi) Others- Rs.1,50,000/- |
| 6. | (i) Deliver or cause to be delivered or render any article or thing or service less than the quantity or number or service contracted for or paid for. (ii) Fraudulently receive or cause to be received or obtain any article or thing or service in excess of the quantity or number or service | section 30 | for 1st offence, in case of,- (i) Hawker/non-permanent establishment - Rs.200/- (ii) Retailer- Rs. 3,000/- (iii) Wholesale dealer– Rs 5,000/- (iv) Manufacturer/Packer/Importer- 7500 (v) Petroleum Industry (Retail Outlet/ Tank Lorry/ Storage Depot etc.)- Rs.10,000/- (vi) Others - Rs.7,500/- for 2nd offence, in case of,- (i) Hawker/non-permanent establishment - Rs.400/- (ii) Retailer- Rs. 6000/- |
| contracted for or paid for. | (iii) Wholesale dealer- Rs 10,000/- (iv) Manufacturer/Packer/Importer- Rs.15,000/- (v) Petroleum Industry (Retail Outlet/ Tank Lorry/ Storage Depot etc.)- Rs.20,000/- (vi) Others - Rs.15,000/- | ||
| 7. | (i) Omit or fail to submit returns, maintain any record or register. (ii) On inspection, omit or fail to produce any weight or measure or any document, register or other record relating thereto. | section 31 | for 2nd offence, in case of,- (i) Manufacturer- Rs. 25,000/- (ii) Repairer- Rs.10,000/- (iii) Dealer- Rs.10,000/- (iv) Others- 5,000/- for 3rd offence and subsequent offence, in case of,- (i) Manufacturer- Rs. 90,000/- (ii) Repairer- Rs.80,000/- (iii) Dealer- Rs.75,000/- (iv) Others- 50,000/- |
| 8. | Sale, distribution, delivery or transfer or use of unverified weight or measure. | section 33 | for 1st offence, in case of,- (i) Hawker/non-permanent establishment - Rs.2,000/- (ii) Retailer- Rs. 5,000/- (iii) Wholesale dealer- Rs.7,000/- (iv) Manufacturer/Packer/Importer and Manufacturer/Dealer/Importer of weight or measure- Rs. 10,000/- (v) Petroleum Industry (Retail Outlet/ Tank Lorry/ Storage Depot etc.)- Rs.10,000/- (vi) Others - Rs.7,000/- |
| 9. | Sale or delivery of any commodity, article or thing by any means other than the standard weight or measure or number | section 34 | for 2nd offence, in case of,- (i) Hawker/non-permanent establishment - Rs.400/- (ii) Retailer- Rs. 5,000/- (iii) Wholesale dealer– Rs 10,000/- (iv) Manufacturer/Packer/Importer- Rs. 15,000/- (v) Petroleum Industry (Retail Outlet/ Tank Lorry/ Storage Depot etc.)- Rs.25,000/- (vi) Others - Rs.15,000/- for 3rd offence and subsequent offence, |
| in case of,- (i) Hawker/non-permanent establishment - Rs.50,000/- (ii) Retailer- Rs. 60,000/- (iii) Wholesale dealer– Rs 70,000/- (iv) Manufacturer/Packer/Importer- Rs. 80,000/- (v) Petroleum Industry (Retail Outlet/ Tank Lorry/ Storage Depot etc.)- Rs.1,00,000/- (vi) Others - Rs.80,000/- | |||
| 10. | Rendering service in terms of or through means other than the standard weight or measure or number. | section 35 | for 2nd offence, in case of,- (i) Hawker/non-permanent establishment - Rs.400/- (ii) Retailer- Rs. 5,000/- (iii) Wholesale dealer– Rs 10,000/- (iv) Manufacturer/Packer/Importer- Rs. 15,000/- (v) Petroleum Industry (Retail Outlet/ Tank Lorry/ Storage Depot etc.)- Rs.25,000/- (vi) Others - Rs.15,000/- for 3rd offence and subsequent offence, in case of,- (i) Hawker/non-permanent establishment - Rs.50,000/- (ii) Retailer- Rs. 60,000/- (iii) Wholesale dealer– Rs 70,000/- (iv) Manufacturer/Packer/Importer- Rs. 80,000/- (v) Petroleum Industry (Retail Outlet/ Tank Lorry/ Storage Depot etc.)- Rs.1,00,000/- (vi) Others - Rs.80,000/- |
| 11. | Contravention of any of the provisions of the Act or rules made thereunder by Government Approved Test Centre | section 37 | Rs.1,00,000/- |
| 12. | (i) Giving false information. (ii) Submit a return or | section 41 | for 2nd offence- Rs. 5,000/- for 3rd offence and subsequent offence- Rs. 3,50,000/- |
| maintain any record or register which is false in material particulars. | |||
| 13. | Manufacture of weight or measure without Registration Certificate. | section 45 | for 2nd offence- Rs.20,000/- for 3rd offence and subsequent offence- Rs.3,50,000/- |
| 14. | Repair or sale or offer, expose or possess for repair or sale any weight or measure without Registration Certificate. | section 46 | for 2nd offence- Rs.5,000/- for 3rd offence and subsequent offence- Rs.3,50,000/- |
| 15. | Alteration or tempering of Registration Certificate. | section 47 | for 2nd offence- Rs. 20,000/- for 3rd offence and subsequent offence- Rs. 3,50,000/- |
| 16. | Fail to keep verified and stamped weights, at the site of each weighing instrument, as per the provisions of rule 21(4) of the Rajasthan Legal Metrology (Enforcement) Rules, 2011. | sub-section 3 of section 53 of the Act and rule 23 of the Rajasthan Legal Metrology (Enforcement) Rules, 2011 | for 1st offence, in case of,- (i) Hawker/non-permanent establishment - Rs.150/- (ii) Retailer- Rs. 1,000/- (iii) Wholesale dealer– Rs 2,000/- (iv) Manufacturer/Packer/Importer- Rs. 5,000/- (v) Others - Rs.2,500/- for subsequent offence, in case of,- (i) Hawker/non-permanent establishment - Rs.500/- (ii) Retailer- Rs. 5,000/- (iii) Wholesale dealer– Rs 10,000/- (iv) Manufacturer/Packer/Importer- Rs. 50,000/- (v) Others - Rs.50,000/- |
| 17. | Fail to keep verified capacity measure to check the output from the petrol/diesel pump as per the provisions of rule 21(5) of the Rajasthan Legal Metrology | sub-section 3 of section 53 of the Act and rule 23 of the Rajasthan Legal Metrology (Enforcement) | for 1st offence- Rs. 5,000/- for 2nd offence- Rs.10,000/- for 3rd offence and subsequent offence- Twice the amount compounded in respect of the previous offence, subject to a maximum limit of rupees one lakh. |
| (Enforcement) Rules, 2011. | Rules, 2001 | ||
| 18. | Non-exhibition of Certificate of Verification as per the provisions of rule 22 of the Rajasthan Legal Metrology (Enforcement) Rules, 2011. | sub-section 3 of section 53 of the Act and rule 23 of the Rajasthan Legal Metrology (Enforcement) Rules, 2011 | for 1st offence- Rs.500/- for 2nd offence- Rs.1,000/- for 3rd offence and subsequent offence- Twice the amount compounded in respect of the previous offence, subject to a maximum limit of rupees one lakh. |
| 19. | Contravention of any other provisions of the Rajasthan Legal Metrology (Enforcement) Rules, 2011 for which no punishment has been separately provided in the Act. | sub-section 3 of section 53 of the Act and rule 23 of the Rajasthan Legal Metrology (Enforcement) Rules, 2011 | for 1st offence- Rs.10,000/- for 2nd Offence- Rs.15.000/- for 3rd Offence- Rs.20,000/- for subsequent offence- Twice the amount compounded in respect of the previous offence, subject to a maximum limit of rupees one lakh. |
23. Insertion of new SCHEDULE–XII.- After SCHEDULE–XI, so amended, the following new SCHEDULE-XII shall be added, namely:-
"SCHEDULE – XII
[see section 15(6)]
Government of Rajasthan
Department of Consumer affairs
IMPROVEMENT NOTICE
(Under section 15(6) of the Legal Metrology Act, 2009)
Notice No. ………………... Date ………………...
Name of officer ………………... Designation ………………...
To,
Name of Firm/
………………...
Establishment/Company
Name of
………………...
Proprietor/Partner/Director
Address of Premise
………………...
(State, District, Pin Code) Nature of Business ………………...
142 राजस्थान राज-पत्र, जलाईु 30, 2026 भाग 4 (ग) GSTIN/Trade LicenseNo./Other Registration/ ………………...
Approval
Phone No. ………………...
Email ………………...
Subject: Improvement Notice under section 15(6) of the Legal Metrology Act, 2009.
Whereas, complaint/information has been received and/or there are reasonable grounds to believe, on the basis of inspection, examination of records, personal knowledge and other credible information, that non-compliance of the provisions of the Legal Metrology Act, 2009 and/or rules made thereunder exists at your business premises/establishment and whereas, the premises/business establishment situated at .......................................................was inspected on dated…………………., in exercise of powers conferred under section 15 of the Legal Metrology Act, 2009;
And whereas, during the course of inspection, verification and examination of records, registers, documents, packaged commodities, weight or measure and other related articles, certain deficiencies and contraventions of the provisions of the Legal Metrology Act, 2009 and/or rules made thereunder were noticed.
Details of Improvement Notice:
1. Grounds for believing non-compliance
It is observed and reasonably believed, on the basis of the inspection carried out and the examination of relevant records/articles/weight or measure that the provisions of the Legal Metrology Act, 2009 and/or rules made thereunder have not been duly complied with.
2. Matters constituting failure to comply
The following deficiencies/violations were noticed during inspection:
.................................................................................................................................................
.
.................................................................................................................................................
.
.................................................................................................................................................
.
3. Measures required to secure compliance
You are hereby directed to undertake the following corrective and remedial measures in order to secure compliance with the provisions of the Legal Metrology Act, 2009 and rules made thereunder:
.................................................................................................................................................
.
.................................................................................................................................................
.
.................................................................................................................................................
.
भाग 4 (ग) राजस्थान राज-पत्र, जलाईु 30 2026 143You shall further ensure maintenance of proper records/documents/weight or measure and strict compliance with all applicable statutory provisions in future.
4. Time allowed for compliance
You are hereby required to comply with the above directions and rectify the deficiencies within a period of 15 (Fifteen) days from the date of receipt of this Notice.
You are hereby directed to submit your explanation with records and documents to the undersigned within 15 days of the receipt of this notice, failing which an appropriate legal action may be initiated against you as per provisions of the said Act and rules. Issued under my hand and seal on this ............day of ................
Signature with Seal
[No. F89/Estt./LM-01(56)/BRAP-2022-00456]
By order of the Governor, Sunil Poonia, Joint Secretary to the Government.
____________
Government Central Press, Jaipur.