Servants of Knowledge
Extraordinary Gazette of India · Government of India

In exercise of the powers conferred on me as Chief Inspector of Mines, under clause b of subregulation

Published 21 June 2017

Ministry
Ministry of Labour and Employment
Department
Directorate General of Mines Safety
Office
Not Applicable
Gazetteid
NOT available ( 176837 )
Identifier
in.gazette.central.e.2017-06-21.176837
Languages
English, Hindi
Published at
Original source ↗

REGD. NO. D. L.-33004/99 रजिस्ट्री सं॰ डी॰ एल॰-33004/99

असाधरण

EXTRAORDINARY

भाग II—खण्ड 3—उप-खण्ड (i)

PART II—Section 3—Sub-section (i)

प्राध्किार से प्रकाशित

PUBLISHED BY AUTHORITY

सं. 509] नई दिल्ली, बुध्वार, जून 21, 2017/ज्येष्ठ 31, 1939

No. 509] NEW DELHI, WEDNESDAY, JUNE 21, 2017/JYAISTHA 31, 1939

(cid:7088)म एवं रोजगार मंत्रालय

(खान सुरक्षा महानिदेशालय)

अधिसूचना

धनबाद, 28 अप्रैल, 2017

सा.का.नि. 618(अ).—धातुमय खान विनियम, 1961 के विनियम 148 के उप-विनियम (2) के खंड (ख) के अन्र्तगत मुख्य खान निरीक्षक के रूप में मुझे प्रदत्त शक्तियों का प्रयोग करते हुए मैं, भारत के राजपत्र में दिनांक 05 जुलाई, 1975 को प्रकाशित भाग- ।। खण्ड – 3(i) की अधिसूचना सं. जीएसआर- 829, दिनांक 18 जून, 1975 को अधि(cid:7059)ांत करते हुए, एतद द्वारा यह विनि(cid:7416)र्दष्ट करता हूँ कि खुले धातुमय खानों के विभिन्न स्थानों एवं भागों में, जहाँ कार्य के दौरान नैसर्गिक प्रकाश की कमी है, प्रदान किए जाने वाले प्रकाश के मानक निम्नलिखित सारणी में विनि(cid:7416)र्दष्ट मानकों एवं तत्प(cid:7391)ात् उल्लिखित प्रकाश व्यवस्था हेतु सामान्य दिशा-निद(cid:7287)शों के अनुसार होगी : -

खुले धातुमय खानों में प्रकाश के मानक

संक्षेपण – v: उध्र्वाधर ; H क्षैतिज

ᮓम संख् या प्रकाशित किए जाने वाले स् थान/ भाग प्रदान किए जानेवाले प्रकाश का न् यूनतम मानक
1. भारी मशीनरी का कार्य-स् थल 15H, 25V (ताकि जिस गहराई और ऊ ँ चाई तक मशीन संचालित होती है, उसे प्रकाशित किया जा सके ।
2. ᮟिलिंग ऑपरेशन
(i) क्षेत्र जहाँ ᮟिलिंग रिग कार्य करता है। 25 V

3845 GI/2017

(1)2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]

ताकि ᮟिलिंग रिग के पुरे ऊँ चाई को प्रकाशित किया जा सके ।
(ii) वह क्षेत्र जहाँ ᮟिल छिᮤ विद्यमान है। 15H
3. वह स् थान जहाँ हस् तचालित कार्य किया जाता है। 15H, 25V
4. वह स् थान जहाँ लोडिंग, अनलोडिंग अथवा स् थानान् तरण; डम् पर, ट्रक अथवा ट्रेन के लोडिंग का कार्य किया जाता है (जिसमें ओवरबडᱷन तथा धातु / अयस् क स् टॉकयार्ड भी सम्मिलित है ) 15H, 15V
5. मशीन का ऑपरेशन के बिन अथवा कार्य-प्रणाली स् थल 50H ऑपरेशन के सभी स् थलों पर
6. ट्रक तथा डम् फर का हॉल रोड 10H
7. पिट में रेल हॉलेज ट्रैक 10H
8. ब ेंच से बेंच तक रोड वेज और फू ट-पाथ 10H
9. नियोजित व् यक्तियों के उपयोग के लिए स् थायी मार्ग 10H
10. इनपिट ᮓशर/ फीडर ब्रेकर 40H
11. हैंड पि᳴कं ग स् थल 50H
12. कन् वेयर
(ए) स् थानान् तरण स् थल और ᮟाईव/ टेल एन् ड क्षेत्र 40H
(बी) कन् वेयर के अनुरेख में 20H
13. खनिज/अयस् क संचालन संयंत्र
(ए) ᮓशिंग, स् ᮓीनिंग, पृथ्ककीकरण और लोडिंग/ अनलोडिंग के स् थान 40H
(बी) ऑपरेशन प्वाइंट्स 50H
(सी) अन् य स् थान (सामान् य रूप में) 20H
14. पम्पिंग स् टेशन 40H
15. (i) विद्युत सब-स् टेशन 100H, 50V
(ii) विद्युत उपकरण/ साधन संचालन के अन् य स् थान 20H, 20V
16. प्राथमिक उपचार के न् ᮤ 50H
17. आ᮰य स् थान 30H
18. कार्यशाला 100H, 50V
19. पाकᲈ ग यार्ड 50H
20. प्रबंधक द्वारा लिखित रूप में चिन्हित की गई सामान् य कार्य क्षेत्र 10H सतह के उस स् तर पर जिसे प्रकाशित किया जाना है
भारत का राजपत्रा : असाधरण [भाग IIखण्ड 3(i)] 3

खान में प्रकाश हेतु दिशा-निद(cid:7287)श :-

1. खान में प्रकाश व्यवस्था का अभिकल्पन एवं स्थापन उचित लैम्पों तथा संयोजनों के ऊँ चाई, दिग्विन्यास, अंतराल तथा परावर्तकों या अन्य उपांगो के संदर्भ में इस प्रकार किया जाना चाहिए कि कार्यस्थल पर आराम दृष्टि हेतु प्रकाश का एक समान वितरण सुनि(िcid:7391)त किया जा सके और कर्मियों के आंखों में तनाव, थकान एवं चिकित्सीय रूप से परिभाषित प्रतिबल को रोकने के लिये बाधाजनक परछाइयों, प्रकाश की ती(cid:7087)ता का चकाच(cid:7301)ध, चमक, प्रकाश पु ंज और प्रकाश प्रदूषण से बचा जा सके ।

2. उन स्थानों पर जहाँ स्थायी/स्थिर लाइ(cid:7411)टंग दिया जाना संभव नह(cid:7277) है, वहां पोट(cid:7287)बल लाइ(cid:7411)टंग का प्रबंध किया जायेगा ।

3. मुख्य स्थानों जैसे विद्युत उप-के न्(cid:7076)ों तथा प्रबंधक द्वारा निर्धारित अन्य स्थानों पर पृथक (cid:7090)ोत द्वारा आपात प्रकाशीय व्यवस्था उपलब्ध कराया जाएगा।

4. हॉल रोडों के मामलों में प्रकाशीय फि(cid:7411)टंग का दिगविन्यास इस प्रकार समायोजित रखा जाएगा कि प्रकाश सड़क के अनुरेख न जाकर सड़क के आर-पार उत्सर्जित हो। जहाँ हॉल रोड की चौड़ाई अधिक है, वहाँ प्रकाश की व्यवस्था सड़क के दोनों किनारे (cid:7059)मिय तरीके से दी जाएगी अथवा सड़क के बीच विभाजक पर कतार में दी जाएगी ताकि मानक अनुरूप प्रकाश का रख-रखाव किया जा सके ।

5. भारी मशीनों, डम्प/ स्टॉक यार्ड तथा लोडिंग/ अनलोडिंग वाले अन्य क्षेत्रों के कार्य स्थलों पर प्रकाश की ऐसी व्यवस्था होगी कि अंधेरापन उत्पन्न नह(cid:7277) हो सके ।

6. हाइ(cid:7071)ॉलिक एक्सके वेटर की उच्च गतिशीलता को ध्यान में रखते हुए इन मशीनों द्वारा बनाए गए फे स/ बेंच को यथा व्यवहार्य संगत गतिशील प्रकाश (cid:7090)ोत से प्रकाशित किया जाएगा, ताकि शिफ्टिंग की देरी से पिछड़ने की संभावना खत्म हो जाए।

7. डम्प/स्टॉक यार्ड को उचित संख्या में उच्च मास्ट प्रकाश टावर/(cid:7090)ोत द्वारा प्रकाशित किया जायेगा । यह भी सुनि(िcid:7391)त किया जाएगा कि चालू डम्प के किनारों तक पर्याप्त प्रकाश पहुँच सके ।

8. इन मानकों के बेहतर कार्यान्वयन हेतु प्रत्येक खान का प्रबंधक विस्तृत लिखित ''प्रकाश योजना'' बनाएगा, जिसमें ''प्रकाशन नक्शा'' तथा इस प्रयोजन हेतु मूल कर्मियों के कर्तव्य एवं दायित्व होंगे ।

9. खान के किसी विशेष स्थान या ऑपरेशन के संबंध में जहाँ, कु छ विशेष दशाओं के कारण प्रबंधक के विचार में अनुबध्द न्यूनतम मानक का तर्क पूर्ण रूप से अनुपालन किया जाना व्यवहार्य नह(cid:7277) है, उस दशा में वह वहां उसे भिन्न प्रकाशन उपलब्ध करा सकता है, यदि उसने ''प्रकाशन योजना'' में यथास्थिति ऐसे स्थानों या ऑपरेशनों के लिए प्रबंध किये जाने वाले संशोधित न्यूनतम प्रकाश स्थिति को उचित कारण देते हुए नि(cid:7416)र्दष्ट कर रखा है तथा इसकी एक प्रति क्षेत्रीय निरीक्षक को प्रस्तुत कर चुका है ।

10. प्रकाश सव(cid:7287)क्षण:

(i) प्रत्येक खान का प्रबंधक प्रकाश की पर्याप्तता को सुनि(िcid:7391)त करने के लिए प्रत्येक महीने में कम से कम एक बार प्रकाश का सव(cid:7287)क्षण कराने का बंदोबस्त करेगा।

(ii) ऐसे सव(cid:7287)क्षण के दौरान, प्रकाश का मापन, यथास्थिति, कार्य-स्थल या हॉल रोड या ट्रेवेलिंग या हॉलेज रास्ते के सीमा के भीतर प्रकाश (cid:7090)ोत से अधिकतम दूरी पर भी करना होगा।

4 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]

(iii) ऐसे प्रत्येक सव(cid:7287)क्षण का एक अभिलेख सव(cid:7287)क्षण कार्य करने वाले सक्षम व्यक्ति द्वारा रखा तथा उस पर उसका हस्ताक्षर किया जाएगा, जिस पर प्रबंधक प्रतिहस्ताक्षर कर तारीख डालेगा।

11. प्रकाश नक्शा:

(i) प्रत्येक खान का प्रबंधक यह सुनि(िcid:7391)त करेगा कि एक प्रकाश नक् शा जिसमें स्थानों का स्थिति, प्रकाश व्यवस्था के लिए लगाए गए युकि उपस्कर, लैम्प, आधार, प्रकाशन हेतु अन्य युक्तियाँ तथा प्रकाशित किए जाने वाले विविध स्थानों के लिए अपेक्षित एवं माप किए गए प्रकाश का मान का रख-रखाव किया जाए। जहाँ खान का कोई क्षेत्र इस्तेमाल में नह(cid:7277) है अथवा वहाँ प्रकाश की आवश्यकता नह(cid:7277) है, उसे स्पष्टत: चिन्हित किया जाएगा तथा नक् शा पर कारणों सहित सीमांकित करते हुए अभिलिखित किया जाएगा। नक् शा सव(cid:7287)क्षक और प्रकाश मानक का रख-रखाव करने वाले प्राधिकृ त अधिकारी द्वारा तारीख सहित हस् ताक्षरित किया जायेगा तथा प्रबंधक द्वारा तारीख के साथ प्रतिहस्ताक्षर किया जाएगा।

(ii) प्रकाश नक्शा को प्रति माह प्रकाशन सव(cid:7287)क्षण तथा व(cid:7420)क(cid:7304) ग के चालू स्थिति के आधार पर अद्यतन किया जाएगा।

[संचिका सं. जेड-20041/02/2017/वि.एवं.त. (मु.)]

प्रशांत कु मार सरकार, मुख्य खान निरीक्षक MINISTRY OF LABOUR AND EMPLOYMENT

(Directorate General of Mines Safety)

NOTIFICATION

Dhanbad, the 28th April, 2017

G.S.R. 618(E).—In exercise of the powers conferred on me as Chief Inspector of Mines, under clause (b) of sub-regulation (2) of Regulation 148 of the Metalliferous Mines Regulations 1961, I, in supersession of Notification No. GSR-829, dated 18th June 1975, published in the Gazette of India Part II, Section 3(i) on 5th July 1975, hereby specify that the standards of lighting to be provided during working hours at different places or areas, where natural light is insufficient in opencast metalliferous mines shall be in the manner as specified in the following table and in conformity with the general guidelines for illumination mentioned thereunder:

STANDARDS OF ILLUMINATION IN OPENCAST METALLIFEROUS MINES

Abbreviations- V: Vertical; H: Horizontal
Serial No. Place/Area to be illuminated Minimum standards of illumination to be provided (in lux)
1 Work place of Heavy Machinery 15 H, 25 V (so as to cover depth and height through which the machine operates.)
2 Drilling operations
(i)Area where drilling rig works 25 V (so as to illuminate full height of
the drilling rig)
(ii)Area where drill holes exists 15 H
3 Places where manual work is done 15 H, 25 V
4 Places where loading, unloading or transfer, loading of dumpers, trucks or train is carried on (including OB Dump and Mineral/Ore Stack Yard) 15 H, 15 V
5 Operators cabins of machines or mechanisms 50 H at all places of operation
6 Haul roads for Trucks and Dumpers 10 H
7 Rail haulage track in the pit 10 H
8 Roadways and footpaths from bench to bench 10 H
9 Permanent paths for use of persons employed etc. 10 H
10 In-pit Crusher/Feeder Breaker 40 H
11 Hand Picking Points 50 H
12 Conveyers
(a) Transfer points and drive/tail end area 40 H
(b) Along conveyor 20 H
13 Mineral/Ore Handling Plant
(a) Places of crushing, screening, segregation and loading/unloading 40 H
(b) Operation points 50 H
(c) Other places (in general) 20 H
14 Pumping Station 40 H
15 (i) Electrical Sub-station 100 H, 50 V
(ii) Other places of operation of electrical apparatus/equipment 20 H, 20 V
16 First Aid station 50 H
17 Rest shelter 30 H
18 Workshop 100 H, 50 V
19 Parking Yard 50 H
20 General working areas as determined by the Manager in writing 10 H at the level of surface to be illuminated
भारत का राजपत्रा : असाधरण [भाग IIखण्ड 3(i)] 5 6 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]

Guidelines for mine illumination:

1. The mine lighting should be designed and installed with proper lamps and fixtures in regard to height, orientation, spacing and reflectors or other accessories, so as to secure a uniform distribution of light on the work area for visual comfort and avoiding objectionable shadows, sharp contrasts of intensity, glare, light clutter (excessive groupings of light) and light pollution to prevent strain on the eyes of the workmen, work fatigue and medically defined stress.

2. Portable lighting shall be provided at places, where the permanent/fixed lighting is not possible.

3. At strategic locations like electric substation, and any other places as determined by the Manager, emergency lighting arrangement by separate source shall also be provided.

4. In case of haul roads, orientation of light fittings should be kept so adjusted as to have emittance of light across the road and not along the road. Where the width of haul roads is more, the lighting arrangements shall be provided either by rows of lights erected on both sides of the road or by a centrally erected row over the divider, so as to maintain illumination as per standard.

5. Lighting arrangement at working places of heavy machineries, dump/stack yard and other loading/unloading areas shall be such that the formation of dark zone is avoided.

6. Considering high mobility of hydraulic excavators, the faces/benches worked by such machineries shall, as far as practicable, be illuminated by light source of matching mobility so as to avoid chances of lag for want of shifting.

7. Dump/stack yards shall be illuminated by suitable numbers of high mast towers/light source. It shall also be ensured that adequate light reaches up to edges of the active dump.

8. For better implementation of these standards, the manager of every mine shall formulate a detailed written "Illumination Scheme", which may include an "Illumination Plan" and duties and responsibilities of Key officials for the purpose.

9. In respect of any particular place or operation in a mine, where due to existence of some special conditions the manager is of the opinion that compliance as per stipulated minimum standard is not reasonably practicable, he may provide illumination in variance thereof, if he has indicated the modified minimum illumination to be provided for such place or operation, as the case may be, in the "Illumination Scheme" with proper justification for the same and submitted a copy thereof to the Regional Inspector.

10. Illumination Survey:

(i) The manager of every mine shall arrange to conduct Lighting Survey once at least in every month to ensure adequacy of illumination.

भारत का राजपत्रा : असाधरण [भाग IIखण्ड 3(i)] 7

(ii) While making such survey, the measurement of lighting shall also be taken at the point farthest from the source of light lying within the limit of the work place or in haul road or travelling or haulage roadway, as the case may be.

(iii) A record of every such survey shall be maintained and signed by the competent person making the survey and countersigned and dated by the manager.

11. Illumination Plan:

(i) The manager of every mine shall ensure that an Illumination Plan, indicating the location of places, type of illuminating devices, fixtures, lamps, supports, any other devices for illumination and showing required as well as measured value of light at various places to be illuminated, is maintained. Where any area of the mine is not in use or not needed to be lighted, the same shall be clearly marked and demarcated on the plan with reasons to be recorded. The plan shall be kept signed and dated by the surveyor and the official authorized for maintaining the lighting standard and countersigned and dated by the manager.

(ii) The Illumination Plan shall be brought up to date in every month based on the monthly illumination survey and considering the current status of workings.

[F. No. Z-20041/02/2017/ S&T(HQ)]

PRASANTA KUMAR SARKAR, Chief Inspector of Mines

Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064 and Published by the Controller of Publications, Delhi-110054.

Cite this issue. Extraordinary Gazette of India, Government of India, 21 June 2017. Indian Gazettes, https://egazette.servantsofknowledge.in/details/in.gazette.central.e.2017-06-21.176837/. Archive identifier in.gazette.central.e.2017-06-21.176837.