This Gazette may contains Multiple Subjects

रजिस्ट्री सं. डीएल ( एम ) -04/0007/2003-05

REGISTERED No. DL(N)-04/0007/ 2003-05 भारत की राजपत्र The Gazette of India

साप्ताहिक/WEEKLY

प्राधिकार से प्रकाशित

PUBLISHED BY AUTHORITY

सं०40] नई दिल्ली , शनिवार, अक्तूबर 2 अक्तूबर 8 , 2004 ( आरिवन 10, 1926 )

NEW DELHI , SATURDAY, OCTOBER 2-OCTOBER 8 , 2004 (ASVINA 10 , 1926) No. 40]

इस भोग में भिन्न पृष्ठ संख्या दी जाती है जिससे कि यह अलग संकलन के रूप में रखा जा सके । (Separate paging is given to this Part in order that it may be filed as a separate compilation)

भाग III- खण्ड 2

(PART III - SECTION 2 ]

[ पेटेन्ट कार्यालय द्वारा जारी की गई पेटेन्टों और डिजाइनों से सम्बन्धित अधिसूचनाएं और नोटिस] [Notifications and Notices Issued by the Pate Office relating to Patents and Designs ) THE PATENT OFFICE

PATENTS AND DESIGNS

Kolkata, the 25th September 2004

ADDRESSES AND JURISDICTION OF THE OFFICES OP THE PATENTS OFFICE

The Patent Office has its Head Office at Kolkata and Branch Offices at Mumbai , Delhi and Chennai having. Territorial Jurisdiction on a Zonal basis as shown below:-

1. Patent Office Branch, Todi Estates , IIIrd Floor, Sun Mill Compound, Lower Parel(West ), Mumbai-400 013 .

The States ofGujarat, Maharashtra , Madhya Pradesh and Gon and the Union Territories ofDaman and Diu & Dadra and NagarHaveli .

TelegraphicAddress " PATOFFICE" Phone Nos . (022 ) 2492 4058, 2496 1370, 2492 3684, 24903852

PaxNos. (022) 2495 0622, 24903852

E- mail : [email protected]

1-36701/2004

(7521)

2. Patent Office Branch , W-5, West Patel Nagar, New Delhi- 110008.

The States ofHaryana, Himachal Pradesh, Jammu and Kashmir, Punjab , Rajasthan, Uttar Pradesh and Delhi and the Union Territory ofChandigarh.

'Telegraphic Address "PATENTOFIC " Phone Nos. (011 ) 2587 1255, 2587 1256, 2587 1257, 2587 1258. FaxNo. (011 ) 2587 1256. E-mail : [email protected]

3. Patent Office Branch,

Guna Complex, 6th Floor, Annex- 11 , 443, Annasalai , Teynampet , Chennai -600018.

The States of Andhra Pradesh, Karnataka, Kefala , TamilNadu and Pondicherry and the Union Territories of Laccadive , Minicoy and Aminidivi Islanda .

7522

TelegraphicAddress "PATENTOFFIC"

PhoneNos .(044) 2431 4324/4325/4326.

FaxNos .(044) 2431 4750/4751 .

E-mail . patentchennai @vsnl . net

4. Patent Office (HeadOffice) , Nizam Palace , 2nd M.S.O. Building, 5th, 6th & 7th Floor, 234/4, Acharya Jagadish Bose Road, Kolkata-700 020.

Rest of India

TelegraphicAddress " PATENTS" Phone Nos .(033) 2247 4401/4402/4403.

पेटेंटकार्यालय

एकस्व तथा अभिकल्प

कोलकाता , दिनांक 2 अक्तूबर 2004

पेटेंट कार्यालय के कार्यालयों के पते एवं क्षेत्राधिकार पेटेंट कार्यालय का प्रधान कार्यालय कोलकाता में अवस्थित है तथा मुम्बई , दिल्ली एवं चेन्नई में इसके शाखा कार्यालय हैं , जिनके प्रादेशिक क्षेत्राधिकार जोम के आधार पर निम्न रूप में प्रदर्शित है:-- 1. पेटेंट कार्यालय शाखा, टोडी इस्टेट, तीसरा तल , सन मिल कम्पाउंड, लोअर परेल ( वेस्ट) , मुम्बई - 400 013 ।

गुजरात , महाराष्ट्र तथा मध्य प्रदेश तथा गोआ राज्य क्षेत्र एवं संघ शासित क्षेत्र , दमन तथा दीव एवं दादर और नगर हवेली ।

तार पता : " पेटोफिस"

फोन: (022) 2492 4058, 2496 1370, 2490 3684, 2490 3852 फैक्स: ( 022 ) 2495 0622, 2490 3852

ई. मेल: [email protected]

2. पेटेंट कार्यालय शाखा, डब्ल्यू-5 , वेस्ट पटेल नगर, नई दिल्ली 1100081

हरियाणा, हिमाचल प्रदेश , जम्मू तथा कश्मीर, पंजाब, राजस्थान , उत्तर प्रदेश तथा दिल्ली राज्य क्षेत्रों एवं संघ शासित क्षेत्र चंडीगढ़ ।

तार पता : " पेटेंटोफिक"

फोन: ( 011 ) 2587 1255, 2587 1256 , 2587 1257 , 2587 1258 .

फैक्स: ( 011 ) 2587 1256.

ई. मेल: delhipatent snl.net

THE GAZETTE OF INDIA , OCTOBER 2 , 2004 (ASVINA 10 , 1926) [PART III-SBC. 2 FaxNos .(033)2247 3851 , 2240 1353.

E-mail . patentin@ vsnl.com

[email protected]

Website: http://www.ipindia.nic.in

Allapplications, notices, statements or other documents oranyfees requiredbythe Patents Act, 1970 and thePatents (Amendment ) Act, 2002 or byThe Patents Rüles , 2003 will be received only at the appropriate offices ofthe PatentOffice.

Fees: The fees may either be paid in cash or may be sent byBank Draft or Cheques payable to the Controller ofPatents drawn on a scheduled Bank at the place where the appropriate office situated.

3. पेटैंड कार्यालय शाखा, गुणा कम्प्लेक्स, छठा तल, एमैक्स- II , 443, अग्लासलाई , तेनामपेड, चेन्नई - 6000181

आन्ध्र प्रदेश, कर्नाटक , केरल, तमिलनाडु तथा पाण्डिचेरी राज्य क्षेत्र एवं संघ शासित क्षेत्र लक्षद्वीप, मिनिकाय तथा एमिनिदिनि द्वीप। तार पतां " पेटैद्येफिक" फोन: ( 044) 2431 4324/4325/4326. पौक्स : ( 044 ) 2431 4750/4751.

ई. मेल : [email protected]

4. पेडेंट कार्यालय ( प्रधान कार्यालय ) , निजाम पैलेस, द्वितीय बहुतलीय कार्यालय भवদ, ওমা, ৬छा व 7वां तल , 334/4, आचार्य जगदीश बोस भार्ग , कोलकाता - 700 0201

भारत का अवशेष क्षेत्र ।

तार पंता - " पेटेंट्स"

फोन 1 ( 033 ) 2247 4401/4402/4403 .

फैक्स : ( 033 ) 2247 3851, 2240 1353.

ई. मेल: [email protected]

[email protected] वेब साइट : http//www. ipindia.nic.in

पेटेंट अधिनियम, 1970 तथा पेटेंट ( संशोधन ) अधिनियम , 2002 अथवा पेटेंट नियम, 2003 द्वारा अपेक्षित सभी आवेदन , सूचनाएं, विवरण या अन्य दस्तावेज या कोई फीस पेटेंट कार्यालय के केवल समुचित कार्यालय में ही ग्रहण किए जाएंगे ।

शुल्क : शुल्कों की अदायगी या तो नकद की जाएगी अथवा जहां उपयुक्त कार्यालय अवस्थित हैं , उस स्थान के अनुसूचित बैंक से नियंत्रक, पेटेंट को भुगतान योग्य बैंक ड्राफ्ट अथवा बैंक द्वारा की जा सकती है । 7523 THE GAZETTE OF INDIA, OCTOBER 2, 2004 ( ASVINA 10, 1926 )

PART III-SBC. 2]

CORRIGENDUM ( DELHI)

In the Gazette of India Part III Section-2 (published on 03.07.2004) under Patent Sealed on 24.05.2004 , read Patent No. 191296 instead of Patent No. 19196 .

in the Gazette of India Part III Section- 2 (likely to be published on 07.08.2004) under Patent Sealed on 30.06.2004, read Patent No. 191458 instead of Patent No. 191454 .

Notification regarding qualifying Examinations for Registration as Patent Agents .

a) Written Examination on 17th November , 2004

Paper I Patents Act and Rules

100 Marks

(11.00 a.m. to 1.30 p.m.)

Paper II Drafting and Interpretation of the Patent Specifications and other documents

100 Marks

( 2.30 p.m. to 5.00 p.m. )

100 Marks b) The VIVA VOCE Exanılnation on 18th November , 2004 at 11.00 a.m.

At the Patent Office at Kolkata , Delhi , Mumbai and Chennal.

7524

[PART III-SBC . 2 THEE GAZETTE OF INDIA , OCTOBER 2, 2004 (ASVINA 10, 1926)

LIST OF REGISTERED PATENT AGENTS AS ON 26TH AUGUST 2004

Regd . No. Name & Address

SI.No.

IN/PA- 4

Vidya Sagar , C/o. Reinfry & Sagar, Remfry House. 8. Nangal Raya Business Centre . New Delhi - 110 046.

IN/PA- 5

A.R.Lall

Ph . # + 91 ( 124 ) 238-2202 & 238 2203

Lall Lahiri & Salhotra , Plot No. B - 28 , Sector -32 , Itistitutional Area , Gurgaon- 122 001 , Haryana , Fax +91 ( 124 ) 238-4898

E-mail : lall @@vsnl.com

IN/PA- 13

G.S. DAVAR, C/o M/ s . L.S.Davar & Co., 506 , Shakuntala, 59 , Nehru Place , New Delhi 110 019 .

IN/PA - 14

K.Rajagopalan, C/o . Rajagopalan & Associates , Room No. 6. 2nd floor , Hoare Miller Hullding, 15, Ganesh Chandra Avenue , Calentta - 700 013.

IN/PA- 15

M.S. Daswanl C/o . Daswaol and Daswant . Jaba Kusam Hause , First floor, 34, Chittaranjan Avenue , Calentia - 700 012 .

IN /PA- 18

P.B. Pal, P.S.Pal & Co. Sir Vittaldas chambers , 16,Apolo Street , Fort , Bombay 400 (101 .

IN / PA- 19

R.S.Amladi, C/ o . M /s . Purshottam Das Gok 39D , Khorshed Bullding Sir P.M. Road , Bombay 400 001 .

IN/ PA- 25

Mahan Dewau , R.K. Dewan & Co. , 78, Podar Chambers , S.A.Brelvi Road, Fort , Bombay - 400 001 .

IN/PA- 20

N.K. Anand. Anand Viila , 1.Jaipur Estate , Nizamuddio East , New Delhi - 110013 .

7525 PART III-SEC. 2]

THE GAZETTE OF INDIA, OCTOBER 2 , 2004 ( ASVINA 10, 1926)

10.

IN/PA-27

M.K.Rao .

C/o . Kamath & Kamath , 16. Fourth Main road , Gandhinagar, Adyar , Madras 600 020 .

11.

IN/PA-29

11.W.Kane, Servants of India , Society's Bullding , Sardar Vallabhbhai Patel Road Bombay - 400 004 .

12.

IN/PA-42

K.T.Jose, 12/8, H.L.G . Welcome Apartmen Thirumangalam, Anna Nagar West, Madras 600 101 .

13.

IN/PA-44

M.A.Jose, Khaltan & Co. , Meher Chambers 4th & 5th Floor, R.K.Marg , Ballard Estate , Mumbal - 400 038

14.

IN/PA-47

M.K.Chakraborty,

M/ s . L.S.Davar & Co. , M/ s . H.V.Willlams & Co. , Both , Flats 1B & IC MONALIS 17 , Camac Street , Calcutta - 700.017 .

15.

IN/PA-48

F.S.Groser , D- 1/5, Qutub Enclave, Phase - I Gurgaon 122 002 , Haryana .

16.

IN/PA-49

T.N.Daruwalla ,

M/s. Jehangir Gulabhbhal & Bl Rajbahadur Mansion, 20, Ambalal Doshi Marg , Hamam Street , Bombay -400 023 .

17.

IN/PA- 55

Pravin Anand, Anand Villa , 1, Jaipur Estate, Nizamuddhe East New Delhi - 110 013 .

16.

IN/PA- 59

G.D.Chugh, Premier Registration Service , 8/2 . Rajinder Nager , New Delhi - 110000 .

19.

IN/PA-60

R.P.Bhattacharyn . ('76. DePeming & DePenolng, 10.Government Pinee East , Caleatox- 700 069 .

7526

[PART III-SEC . 2 THE GAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

IN/ PA - 62

20.

A. Vaidyanathan, 451 , 2nd Cross , 3rd Block , 3rd Stage, Basaveswaranagar, Bangalore - 560 079.

IN /PA-64

21.

S.C.Malhotra, M/ s . International Trade Mark Bureau , Gila Niwas , 3rd Floor , 73/75 , Sutar Chawl, Zaveri Bazar, Bombay - 400 002

IN/PA-67

22.

S.K. Dutt, C/o . L.S.Davar & Co. , 506 , Shakuntala, 59, Nehru Place, New Delhi 110 019 .

23.

IN /PA - 69

B.G.Ray, 22/20 Manohar Pukur Road , Calcutta 700 029 .

24.

IN/PA- 73

Samresh Chakraborty, ESCI Law Consultants , " Shivam Chambers " , Forth floor , 53, Syed Amir All Avenue, Calcutta - 700 019.

25.

IN/PA-75

AjitMohan Saha, Trade Mark Registration Bureau , 1 , Netaji Subhash Road , Calcutta - 700 001 .

D.Sen

26.

IN /PA -77

D.Sen & Co. , 6, Old Post Office Street, Ground Floor, Calcutta - 700 001 .

27.

IN/PA-78

D.C. Gabriel , K& S Partners , 84C, C- 6 Lane , Sainik Farms , New Delhi - 110 062 ,

Tel : 91. 11 2653 3182/2653 3187 , Fax : 91 11 2653 3889/2651 8717

28.

IN/PA- 79

T.P.Srinivasan, 27 , Kalyana Ganapathi Street , New Colony , Porur, Chennai - 600 116 .

29.

IN/PA -82

A.N.Nagpaul , 5/10 , West Patel Nager , New Delhi - 110 008 .

30.

IN/PA-83

K.B.Marwalha , 6/322 , Raja Park . Jaipur - 302 004 .

7527 PART III-SBC.2]

THE GAZETTE OF INDIA, OCTOBER 2, 2004 ( ASVINA 10, 1926)

31.

IN/PA-84

V.Gopalakrishna, M/s . King & Partridge, 26/1, Lavelle Road, Bangalore - 560 001 .

32.

IN/PA-90

Miss Kiran Kumar 2/135, Khosia Niwas , Telang Cross Road , Matunga, Bombay - 400 019 .

33.

IN/PA- 91

Bharat S. Shak C/o. Bharat Shah & Co . ,, Advocates & Solicitors 401, God'sGifts , St. Francis Road, Ville Parle (West), Mumbai - 56.

34.

IN/PA-93 Hariharan Subramaniam, M/s . H. Subramaniam & Associates, Attorneys-At- Law, Patent And Trade Mark Agents, E-556, Greater Kailash -III, New Delhi - 110048

35.

IN/PA-101 Arunkumar Purushottam Japee, 3,Brightous Road, Konikapuram, Ρ.Β. 970 Madras -600 (012 .

36.

IN /PA -104 Jyoti Sagar. K& S Partners , 84C, C -6 Lane, Sainik Farms , New Delhi - 110062 , Tel : 91 11 2653 3182/2653 3187,

Fax: 91 11 2653 3889/2651 8717

37.

IN/PA-104A Mr. A.A.Mohan , M/ s Mohan Associates, Flat no D-4,111 floor, Coebros Building, Door no . 11. Cenetoph Road, Teynampet , Chennal-600 018 .

38,

IN/PA-106 Sri Alok Mohan Saha , Trade Mark Registration Bureau, 1, Netaji Subhas Road, Calcutta - 700001 Ph - 248-1796 Fax- 91 33 248 8065

39.

IN/PA-107 Mrs.Anuradho salhotra , N - 128 , Panchsheel park New Delhi 110 017 . Ph-01 6496436/6499923 Fax - 011 6490816/6499467

Email- [email protected]

7528

[PART III-Sac. 2 THE GAZETTE OF INDIA , OCTOBER 2 , 2004 ( ASVINA 10, 1926)

IN/PA- 108

40.

Biswanath Ghosh , M/ s . T.P.Datta & Son, 2. Ganesh Chandra Avenue , Calcutta - 700 013 . Pla- 91 033 261729 Fax -- 91 033 2159936 , 2152049

IN/PA -109

41.

Debasis Datta , M/ s . 'T.P.Datta & Son, 2. G.C.Avenue, Couleutta - 700 013 .

IN /PA - 111

42.

R.R.Shukla . Block No. 0/3 , Sagar Co -Op . Society, Off Sarthi Hotel , Opp : Amatlas Bunglows, Bodakdev , Ahmedabad 380 054.

IN/PA- 111

43.

Sallm Ahmed Shaikh , Dudhwala House, 292-Ballasts road , Between Hotel Sahil & S.T.Depot, Mumbal Central , group no . 4 Haryall, Mumbai - 400 008,

IN/PA-113

44.

Mrs Aloo T. Daruwalla , Rajabahadur Mansion , 20 , Ambalal Doshi Marg. Hamam Stroot , Fort , Munibal - 400 023 .

IN/PA- 113A

45.

Nair M.Ramakrishanan . M/s . R.K.Dewan & Co .. 78 , Podar Chambers , S.A.Breiv! Rond, Fort Bombay 400 001 .

IN/ PA - 114

46,

B.LL.Benerjee, 8B, Sobak Baldya Street , Calcutta - 700 029,

IN/ PA- 114A

47.

K.Hemmprakash Rao , 12-10-651/3 Rand no. 2. Indira Nagar, Warasiguda, Secunderabad 500 361 , Andhra Pradosh .

IN/PA-119

48.

Bibek Narayan Nandi , 2. Gopal Banerjee Lane, Calcutta - 700 026 ,

IN/PA- 120

49.

Chittola Venkata Ramana , 21.34.3 . Katha Road Vishakhapatnam PIN 530 001 .

IN/PA - 121

50.

R.R.Nalr . M/s . DePenning & DePenning , 31. South Bank Road , Madras - 600 028 .

7529 PART III-Sec. 2 ]

THE GAZETTE OF INDIA, OCTOBER 2, 2004 ( ASVINA 10 , 1926)

51.

IN/PA- 122

S.D.Ahuja, 5.3, Syed Amir All Avenue, C'alcutta - 700 019 .

52.

Inder Mohan Singh Mamak , B 464, New Friends Colony , New Delhi 110 065 .

53.

IN/PA-125 Ismall Noor Mohammed Kayser, Mahalaxhmi Building , 2nd Поог, 37 , Maruti Lane, Mumbai - 400 001 .

54.

IN/PA-126 S. Majumdar, 5. Hurish Mukherjee Road, Calcutta - 700 025 Ph -455 7484/85/86 Fax- 91 33 455-7487/88

Emall- [email protected]

55.

IN/PA- 131 P.K.Chakraborty , T.P.Datta & Sons, Commerce House, 2, Ganesh Chandra Avenue , Calcutta -,700013 . Ph - 91 033 261729.

56.

IN/PA- 131 -A Mrs. B. P. Amladi , Purushottamdas Gokuldas, Patent and Trade mark Attorneys , 39-10 , Onlooker Bullding, Sir , P. M. Road, Fort , Bombay 400 001.

57.

IN/PA-134 Dr R.H.Acharya H.K.Acharya & Co. , Mezzanine Floor , N.R. House, Nr . Popular House , Ashram Road, Ahmedabad -380 009

Phone: 91 79 7545254/7545255

Fax: 91 79 7545 5257

58.

IN/PA-135 Shanti Kumar , B 197 Derawal Nagar , Opp . Model Town , Delhi - 110 009

59.

IN/PA- 137 Vidyut Kumar Niyogi , 6/7, A.J.Bose Road, Calcutta - 700 017 .

60.

IN/PA-138 Amarendra Nath Roy , Salba Ghosh & Co. , ROOTC Building, 11. Russel Street , C'alentra - 700 071 .

2-267 01/2004 7530

THE GAZETTE OF INDIA, OCTOBER 2 , 2004 (ASVINA 10 , 1926)

[PART III-SEC. 2

61. IN/ PA- 138 A Balan Kombi , C/O Renfry & Sagar , Remfry House, 8. NangalRaya Business Centre, New Delhi - 110046 Ph-011 559 8072 Fax - 011 5594437,5598013 .

62. IN /PA - 140

S. Ramachandran , C3A/ 126 C Janakpuri , New Delhi 110 058.

63. IN / PA - 140 A Madhav Gajanan Kasbekar, 3/4B , Madhavi Shahnivas , 277, Mogul Lane, Mahlm , Mambal -400016

64. IN /PA- 141 A.Balachandran , 17. Dr. Munlappa Road, Kiipauk , Madras -600010

66. IN/PA-142 M.S.Pandit , E 206 , Bramha Memories , Bhosale Nagar, Pune -411007

66. IN /PA - 143

Basant Lal Wadeira, The White House , M-131 , Greater Kailash - II , New Delhi - 110048 .

67. IN /PA- 144A Ajay Sahni , 2489, Malwa Street , Paliarganj , New Delhi 110 055.

68. IN/PA- 146 Ramesh Chandra Ratilal Shah , 101 , Sarap Building, opp Navjeevan Press , Near Gujrat Vidyapeeth , Alimeciabad 380 014.

69. IN/PA-147 M. Venugopal Menon , C/ o. M/ s . DePenning & DePenning, 31 , South Bank Road, Madras 600 028 .

70. IN/ PA - 147 A Harshll Ramesh Chandra Shah , R.R.Shah & Co. , 101 , Sarap Bullding . opp Navjeevan Press , Near gujrat Vidynpeeth , Ahmedabad - 380014

71. IN /PA- 148 Guruswamy Natraj . M/s . 11. Subramanianı & Associates , Attorneys -At- Law. Patent And Frade Mark Agents . E-556, Grenter Kallash New Delhi - 110048 7531 THE GAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

PART III-SEC . 2]

72.

IN/PA-149

Archana Shankar, C96 , Bathlas Apartments , Plot no . 43 , Patparganj . Indraprasta extension . Delhi - 110092 .

73.

IN/PA- 152 Biswajit Sarkar , D 7 , Apsara , 67, l'ark Street, Calentta-700016

IN/PA- 155

74.

Dr. Amarjyoti Basu, 4.3, Royde Park, Kolkata - 700 034. WestBengal

Phone : 2468-0180

75.

IN/PA-159 J.K.Gupta , Singhania & Co. , B 92, Himalaya House, 23, Kasturba Gandhi Marg, New Delhi- 110001 .

76.

IN/PA- 162 Varadachari Lakshmi Kumaran , M/s . Lakshmi Kumaran & Sridhran , B4-158, Safdarjung Enclave, New Delhi - 110 029. Phone: 011 26192243/73/80 Fax: 011 26197575/26161820

77.

IN /PA - 163 Rajendra Kumar , K& S Partners , 84C, C -6 Lane, Sainik Farms , New Delhi - 110 062 , Tel: 91 11 2653 3182/2653 3187 , Fax: 91 11 2653 3889/26518717

78.

IN/PA-164 V.Sridharan , M/ s . Lakshmi Kumaran & Sridhran , B4-158 , Safdarjung Enclave , New Delhi - 110 029 . Phone : 011 26192243/73/80 Fax: 011 26197575/26161820

79.

IN/ PA-164 A P.R. Amladi , C/o . M/s . Purushottamdas Gokuldas, 39 - D, Onlooker Building, Sir, P.M. Road, Fort, Bombay - 400 001 .

80.

IN/PA-168 M.P.Bhatnagar , 161 , Vigyan Vihar , Delhi 110092 . Ph -011 6496436/6499923 Fax - 011 6490816/6499467

81.

IN/PA-169 H.M.Jagannatha, 1, Chitrakoot Annexe, 55 /1A, 4th Main, 18th cross , Malleswaram, Bangalore -560055 .

7532

[PART III-SEC. 2 THE GAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

82.

IN/PA- 169 A B. N. Poojari ,

M/ s . Asian Patent Bureau . Room No. 8 , Ist floor 94-96 Bora Bazar Street , Fort, Bombay - 4011 001.

83.

IN/PA-172 Jayaula Pal . C/O M /s Remfry & Sagar, Remfry House, 8. Nangal raya Business Centre , New Delhi - 110046 .

IN/PA-173

84.

V. B. Mehrish .

Titus & Co. , Advocates , Titus House , R-4 , Greater Kallash -1 , New Delhi - 110 048 .

Tel: 91 011 26470700 , 26475800

Fax: 91 011 26480300

IN/PA- 174

85.

Arindam Paul , 143, Central Road , Anandpuri , Barrackpore, 24 pgs(north)

86.

IN/PA -178

Kuraila Mohan Kumar, 12-10-165/3 , Road no . 2 , Indira Nagar , Warasiguda , Secunderabad 500 361 .

87.

IN /PA -179 D. C. Prasad, 95, Muktaram Babu Street Calcutta 700 007 , West Bengal .

88.

IN/PA - 179A Rabindra Nath Kapoor , 57/1700 , Apsara Building , Arya Samaj Road , Karol Bagh, New delhi .

89.

IN/PA- 180

Mahendra Kumar Ravel , Spectrum CommunityCentre , Near G.P.O. , Salapose Road , Ahmedabad-380001 .

90.

IN/PA -181 Manjula Ravel, Spectrum CommunityCentre , Near G.P.O. , Salapose Road , Almedabad- 380001

91.

IN/PA- 182

Subramanium Ramaa Vedavaman .

C-508 , Manja Makal , 35, Pall Hill Read , Baadro , Mumbai - 400050 . Ph 6460901,6046924

Fax -91 022 648438,6492161 .

92.

IN/PA- 184 Sangeeta Goel , C/o Lalt Lahiri & Salhotra , N- 128 , Panchsheel Park, New Delhi - 110017 .

Ph 011 6496436/6499923 .

7533 PART III SEC. 2]

THE GAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

93.

IN/PA- 184 A DebfitGupta, C/o . M/ s . Anand & Anand , 1, Jalpur Estate, Nizamuddin East, New Delhi - 110013 .

94.

IN/PA-186 Satish Kumar Rashiklai Shah , 45, Haribaug, Sunmill Road, Lower Parel(W), Mumbal - 400013 .

95.

IN/PA-188 Harini Narayan Swamy, 303, Regency Zeenath Apartments, Panja gutta , Hyderabad -500482.

96.

IN/ PA- 189 P. S. Dave, High Court Road, BlhavNagar364 001, Gujarat.

97.

IN/PA- 189A S.K.Jilani Saheb , 17/676, Chakali Street , Barracks , Nellore-524001

98.

IN/PA-190 S. A. Dave High Court Road, Bhav Nagar 364 001. Gujarat.

99.

IN/PA- 190A MsRanjana, Law Office of Lail Lahiri & Salhotra, N-128, Panchsheel Park, New Delhi - 110017

100..

IN/ PA- 191 V. Veeraraghavan, 10, SecondMain Road, CTTColony Mylapore, Madras -600004.

To be continued in the next issues 7534

[PART III-SBC. 2 THE GAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

Application for the patent filled at The Patent Office. Kolkata.

27/08/2004

Applicant Detalls

New Application No

515/KOL/2004

HSU, FU -YU ;; " SAFETY HYPODERMIC SYRINGE. "

516 /KOL/2004 NOVAPHARM RESEARCH (AUSTRALIA) PTYLTD. ; , 01/09/2000 ,, Australia; "AN AQUEOUS COMPOSITION COMPRISING ALKYL PYROLIDONER AND ALKYL POLYSACCHARIDE ."

517 /KOL/2004 MCNEIL - PPC , INC;, 28/08/2003 , United States ofAmerica; "TWO LAYER STRUCTURE FOR ABSORBENT ARTICLES . "

518/KOL/2004

COMEDICA INCORPORATED ,; , 22/09/2003 , United States of America; "CONTINUOUS HIGH - FREQUENCY OSCILLATION BREATHING TREATMENT APPARATUS ."

519 /KOL/ 2004 BUESCHER ALFRED J . ; , 14/11/2003, United States of America; " DIESEL INJECTION NOZZLE ."

520/KOL/ 2004

PRASANTA RAY, ; , India ; " NOVEL SUN- TRACKER MECHANISM FOR A SET OF MIRRORS."

521 / KOL/2004 PRASANTA RAY,; West Bengal , India, " NEW COLLISION PREVENTION MECHANISM FOR RAIL WAY VEHICLES . "

30/08/2004

New Application No Applicant Details

522/ KOL/ 2004

JADAVPUR UNIVERSITY , INDUSTRY INSTITUTE PARTNERSHIP CELL .; West Bengal , India; "AN APPARATUS FOR REMOVING WATER SOLUBLE POLLUTANTS AND SUSPENDED PARTICULATE MATTER FROM EFFUENT GASES . "

523/KOL/2004 SATAKE CORPORATION . ; , 04/09/2003 , Japan ; "GRANULE COLOR SRTING APPARATUS WITH DISPLAY CONTROL DEVICE. " 7535 THE GAZETTE OF INDIA, OCTOBER 2 , 2004 ( ASVINA 10, 1926)

PART III-SEC . 2]

31/08/2004

New Application No Applicant Detalls

524/KOL/ 2004 SORGWARNER MORSE TEC JAPAN K. K. ; , 03/09/2003, 19/08/2004, Japan ; " HYDRAULIC TENSIONER . "

525/KOL/ 2004 RATAN PODDAR; West Bengal , India; "A DEVICE FOR CLEANING ELOTHES AND TEXTILE"

01/09/2004

New Application No Applicant Details

526/KOL/2004 ADVANCED PLASTICS TECHNOLOGIES LTD . ; , 17/10/1997, 19/03/1998, 16/10/1998 , United States ofAmerica; "BARRIER -COATED POLYESTER ."

527 /KOL/2004 FISHER & PAYKEL APPLIANCES LIMITED. ; , 26/10/1999, 12/11/1999 , New Zealand ; " POLYPHASE TRANSVERSE FLUX DC MOTOR. "

528/KOL/2004 INFORTRON CO . LTD. ; , 05/09/2003 , 09/02/2004, Republic of Korea; " FLAT- TYPE CORELESS VIBRATION MOTOR. "

529/KOL/2004 LEE YONG CHUOL;, 09/09/2003 , 09/09/2003 , 02/02/2004. , Republic of Korea ; " DISPOSABLE DUST PROTECTIVE MASK."

02/08/2004

New Application No Applicant Detalls

530/KOL/2004 ELECTROSTEEL CASTINGS LIMITED; West Bengal , India; "DEVICES FOR LOADING NESTING AND / OR UNLOADING CEMENT LINED PIPES BY FORKLIFT TRUCK. "

531 /KOL/2004 UTPAL KUMAR BANDYOPADHYAY,; West Bengal , India; " LCD MOISTURE METER FOR JUTE/COTTON . "

532/KOL/2004 IBLE FIRESTOP LIMITED, ;; " FLAME RETARDANT FOR POLYMERIC MATERIALS . "

533/KOL/2004 INNOTECH INC. & VIRGINIA TECH INTELLECTUAL PROPERTIES INC. ; , 15/08/1997 , 06/08/1995, United States of America ; " AN OPTHALMIC LENS, LENS BLANK, OR LENB PPREFORM ." 7536

THE GAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

[PART III-SBC. 2 Application for the patent filed at Patent Office Branch , Chennai

From : 1.7.2004 to 31.7.2004

Applicant Detalls

New Application No

624/CHE /2004

Mr. C. L. Viswanath , 20, 1st Cross , Vasanta Nagar, Bangalore - 560 052, Kamataka; india; " Drawing configuration diagram for a product/ project"

625/ CHE/2004

Mr. M.Krishna Prasad , West Palace , Ponnapuram Post - 638 656 , Erode Dist , T.N . ; , India; " Electrical power genaration using oscillating weight"

626/CHE/2004

M/s . Sundaram Clayton Limited , Jayalakshmi Estates , No. 8, Haddows Road, Chennal - 600 008 , T.N. India;, India ; " Breathing arragement of brake chamber ofa motor vehicle"

627/ CHE / 2004

M/s . TVS MOTOR COMPANY LIMITED , Jayalakshmi Estates , 8, Haddows Road, Chennai - 600 008, T.N. ; , india ; "Auto decompression actuating mechanism for ic engines"

628/CHE/2004

Tecumseh Products Company, U.S.A. , ; , 11/07/2003 , United States of Arnerica; "Bearing support and stator assembly for compressor "

629/CHE/2004

SUMITOMO CHEMICAL COMPANY, LIMITED , JAPAN; 08/07/2003, Japan; "Method for producing e- caprolactam"

630/CHE /2004

Mr. Neethaia Mittu , C/ o . G. Venkatesan , # 267/79V , Jakkappan Nagar, 6th Cross , Krishnagirl - 635 001 , Krishnagiri Dist, T.N . ; , India; "A modified turbo generator meant to harness the spent energy emanating from the delivery end ofdomestic & Irrigation pump sets & fountains "

631 /CHE / 2004

POWERONEDATA CORPORATION , U.S.A . , ; , 08/08/2003 , United States of America ; "Automated utility metering system "

632/CHE /2004

ABB Research Ltd. , Switzerland ;; " High - power switchgear with cooling rib arrangement"

633/CHE/2004

Sumitomo Electric Industries , Ltd. , Japan , 07/07/2003 , Japan ; "Method of producing glass - particle - deposited body and glass- particles - synthesizing burner"

634/CHE /2004

Mr. Khaja Mohd Moinuddin Khader , R. No. 10-1-128/ 1 / 1A, Masab Tank, Hyderabad -500 028, A.P. india ;, India; "An Electrically heated exhaust/ Flue gas purification system"

635 /CHE/2004

Dr. Prabhas Chandra Singh , Praneet Singh , H.No. 8-3-348 / 10 -A ( Metro No. 211 ) Dwarakapuri Colony, Panjagutta, Hyderabad - 500 062. ; , India; "A writing pad" 638/CHE/2004

Natco Pharma Limited , Natca House , Road No. 2, Banjara Hills , Hyderabad - 500 033 , A.P. india ;, india ; "An Improved process for high purity 1 - methylindazole-3- carboxylic acid useful for the preparation of pharmaceutical grade granisetron" 637 /CHE/2004

M/ S . Orchid Chemicals & Pharmaceuticala Ltd. , Orchid Towers , 313 , Valluvar Kottam High Road , Nungambakkam, Chennai - 600034;, India; " New salts for the preparation of cephalosporin antibiotics "

638 /CHE / 2004

Mr. Talari Sony Roy, C - 96 , Sanjeeva Reddy Nagar, Hyderabad - 500 038 , Α.Ρ . ; , India; "Office flie with bullt in hole punch "

639/CHE/ 2004

Mr. K.K. Kumar & Mr. K.K. Prakash , C/o . Shivalinge Gowda , Keerthana Nilaya, Kempanna Layout , Behind Cotton World . Amruthahaill , Bangalore - 560 092;, India; "A process for extraction of phytoecdysterold from convolvulaceae"

840 / CHE /2004

Korea Aiphaline Co. , Ltd. Korea ;, 09/07/2003 , Kores ; " Container with doubie ilds " 641 /CHE /2004

DEGUSSA AG, GERMANY;, 18/07/2003 , Germany; " Molding composition based on polyetheramides "

642/CHE /2004

Mr. C.R. Sethuraaman , 5 E , ' B ' Block , Dr. Jaganathan Nagar, Peelamedu, Coimbatore - 641 014, T.N . ; , India; " Double Belt Drive " 7537 PART III-SBC. 2]

THE GAZETTE OF INDIA , OCTOBER 2 , 2004 (ASVINA 10, 1926)

643/CHE/2004

Smt. Bhuvaneswarl Chandramohan , M/s . Sit Daya Engineering Industries , Plot No. 80-D (New No. 19), Sidoo Industrial Estate , Ambattur, Chennal - 000 000 , T.N. ; , India: "Pully Insulated engineering plastio industrial plug & socket"

644/CHE/2004 Mr. M.8 . Jayachandra Aradhya, M/s . Silicon Micro Systeme, 106, Annexure Bullding , Kodandarama Complex , Gandhi Bazaar Main Road , Besevanagudi , Bangalore -500 004, Kamataka , India ;, Indie; " Universal visi evaluation board

645/CHE/2004

Innoviti Embedded Solutions Pvt . Ltd. , 10/2, Victoria Road, Bangalore - 560 047, India , Indie; "A wireless adaptor for the replacement of a telephone wire"

646/CHE/2004

M/B . Orchid Chemicals & Pharmaceuticals Ltd., Orchid Towers , 313,313 , Valluvar Kottem High Road, Nungambakkam , Chennai - 600034;, Indie; " Gastro Fleeting Multipartloularte Drug Delivery System For Improving The Oral Bloavailability of drugs "

647/CHE /2004 Dr. Reddys Laboratory Genette SBU , 7-1-27, Ameerpet, Hyderabad - 500 018, A.P.; India; "Novel stabilized compositions containing benzimidazole derivatives "

648 /CHE/2004

Dr. B. Srinivasa Amamath , Advalth Biotech Site W1 , 2nd Floor , Electronics City Phase It, Huskur Post , Bangalore - 660 098 ;, India ; " BIO BEER "

649/CHE/2004

DEGUSSA AG, GERMANY;, 18/07/2003 , Germany; "Polvent - containing coating bompositions"

650/CHE /2004

THE BOC GROUP, INC. , 27/04/2004; 17/07/2003, United States of America; "Method for blending and recirculating deuterium -containing ges "

651 /CHE/2004

Premier Instruments & Control Limited, Post Box No. 6331 , 1087-A, Avinashi Road, Coimbatore - 841 087 , T.N. India;, India, "Securky system for automobiles Incorporating till- oum -shock - oum motion sensor "

852/CHE/2004 Mr. Vijay Krishnan Subramanian & Mr. Rajagopal P , O- 14, Anand Apartments , 8, 4th Truet Cross Street , Mandavell , Chennai - 800 026, Τ.Ν . ; , India : "Intelligent vehicle load sensor and Indicator"

853/CHE/2004 Mr. V. Gnanssambandam , 8/0. Mr. C. Velusamy , 104 , Ramanuja Nagar, Kamerajer Road, Uppiliipalayam Post , Coimbatore - 641 016 ;, India : "Squirrel cage induction motor construction - rotor with bearing ( radial & thrust ) at Inner bore with contained lubricants "

654/CHE /2004 Mr. V. Ghanasambaridam , 8/0 . Mr. C. Velusamy, 104 , Ramanuja Nagar , Kamarajat Road, Uppiilipalayam Post , Coimbatore - 641 018 , T.N. ; , India; "Magnetic between squirrel onge induction motor and load" Magnetic coupling 656/CHE/2004 Mr. V. Gnanasambandam , 8/6. Mr. C. Velusamy , 104, Ramanuja Nagar , Kamarajar Road, Uppiilipalayam Post , Coimbatore - 641 016 , T.N . ; , India: " Novel optimised squimel cage induction meter manufacturing process which includes the improved winding loading process"

858/CHE/2004 Dr. Reddya Laboratory Ltd, 7-1-27. Ameerpet , Hyderabad 000 018 , A.P. ; , India; "Noval process for preparation of N - methyl - 3- ( 1 - methyl -4- piperdinyl ) -1H - Indole -8- ethane sulphonamide hydrochloride" .......

657/CHE/2004 Dr. Reddys Laboratory Ltd, 7-1-27 , Ameerpet , Hyderabad - 600 018 , A.P. , India: "Novel polymorphia form of n -methyl - 3- ( 1 -methyl -4 -piperidinyl ) -1H - Indele - s - ethane sulphohamide hydrochloride"

868 /CHE/2004 Mr. Pattukola B. Gnaneshwar , Fiat No. &C & D. 8th Floor, Pettukola Towers, Rear Bullding , 100,100, Poonamallee High Road, Chennal 600 010, T. N . ; , India; "Permanent magnet engine/ motor/ prime mover

659/CHE/2004 PRO -CORD SPA, ( taly ;, 14/07/2003 , Europe ; " Chalee-longue "

660/CHE /2004

THE BOC GROUP, ING. U.S.A... 17/07/2003, United States of America; "Methed for the recovery and recycle of helium and chlorine"

661/CHE/2004 Samsung Electronics Co. Ltd , India Software Operations (880 ) Korea;; "System and method for user profile based mobile access"

662/CHE/2004

SUVEN LIFE SCIENCES LIMITED , Serene Chambers, Road No. 7 , Banjars Hills , Hyderabad - 800 034 , A.P. India: ' India : " Novel indotes useful as therapeutic agente , process for their preparation and pharmaceutical compositions containing them" 32

3-367 01/2004 7538

THE GAZETTE OF INDIA , OCTOBER 2 , 2004 (ASVINA 10 , 1926)

[PART III-SEC. 2 603/CHE/2004

SUVEN LIFE SCIENCES LIMITED , Serene Chambers , Road No. 7 , Banjara Hills, Hyderabad - 500 034 , A.P. India ;, India : " Novel isoquinilino Indoles useful as therapeutic agents , process for thair preparation and pharmaceutical compositions containing them"

664/CHE/2004

KYOWA CHEMICAL INDUSTRY CO . , LTD , JAPAN ;, 19/12/1995 , Japan ; "A Flame retardant "

666/CHE/2004

FOCKE & CO . ( GmbH & Co. ) Germany;, 05/12/1996 , Germany; "A blank made of thin cardboard of similer packaging material for a hinge- lid package"

666/CHE/2004 V & M DeutschlandGmbH, Germany , 18/07/2003, Germany ; "Method and device for the production of seamless pipes"

667/CHE/2004 ABB Research Ltd. , Switzerland;, 21/07/2003 , Europe; " Laser- Irradiated metallized electroceramic"

668/CHE/2004

Dalmia Cantra for Research & Development , an Indien Institute of B- 133 & 134, Paripoorana Estates , Sundakkamuthur Post , Coimbatore - 641 010, T.N. India;, India; "A herbal filler composition for biri , cigarette and the like "

669/CHE/2004 M/ s . Matrix Laboratories, Limited , 1-1-181 / 1 , IV Floor , Sairam Towers , Alexander Road, Secunderabad - 500 003 , India , India; " An improved process for the preparation of N - ( ( 8 ) -ethoxy carbonyl - 1 - butyl ) - (8) -alanine"

570 /CHE /2004

Mr. Srivastav Vivek 8/o . Late Dr. Vinod Shankar Srivastav . Flat No. 12, Surabhi Apartment , 101 , A.G's Layout , New BEL Road, Near Dollara Colony, Bangalore- 500 012 ;, India; " A Cathode Ray tube based on nano Zns: Mn2 + coating

871 /CHE /2004 Mr. A. Xaviar Raja, 798/152 , Opp. St. Mary's Tower , Maravankudiruppu , Nagercoll - 629 002 , K.K. Dist , T.N. India;, India; "Cool power destroy of ayolons"

672/CHE/2004 Mr. Paulduraidavid Manahar Rajapandi , 118A, Krishnapuram, Payan Vilai Post , Thootukudi - 628 223 , T.N . ; , India: "Novel refreshing drink"

873 /CHE/2004 Premier Instrumants & Control Limited , Post: Box No -6331 , 1087-A, Avinashi Road , Coimbatore - 641 037 , T.N. India;, India ; "Centrailsed Automatio Lubrication System for Automobiles"

874/CHE/2004

KABUSHIKI KAISHA TOPOON , JAPAN ;, 18/07/2003 , Japan ; " Operation mioroscope and observation prism "

875/CHE/2004 Mr. Vinuraj . R. , Vinu Associates , Pushpo Bhavan, Payalkulangara , Ambalapuzha , Alapuzha - 668 561 ;; "V-MOS - QUIT"

676 /CHE/2004 Dr. Mallsraj Samuel , 14, Flim Street , Annal Indira Nagar , Valachery , Chennal -600 042 , T.N. India , Indla ; " Curing medicina for rheumatoid arthritis by Immunepethy " 677/CHE/2004 Mr. Sohoni Chandrasekhar, 8/6. Mr. Arvind Sohoni , 203 , Saraswathi Apt, 11th Main , Malleswaram, Bangalors - 860 003, Kamataka , India , India; " Mathod for sending , transmitting and receiving Indian language text massages using a numeric key pad of a phone or any other communicetion equipment using phonetio representation of the Indian language In Engish (or ASCII ) "

678 /CHE/2004 Shasun Chemicals and Drugs Limited , 60, Velacherry Road, Chennal - 600 042, India , India : " Improved process for making form i of olanzapine "

879/CHE/2004

Dr. Malisraj Samuel , 14 , Film Street , Annal Indira Nagar, Velachery, Chennal - 600 042, T.N. India , India: " Sideeffentless curing mediaina for diabatis mellitus by Immunapathy"

680/CHE/2004 Dr. Maliaraj Samuel , 14, Film Street , Annal Indira Nagar, Velachery, Chennal - 600 042, T.N. India , India : " Sideeffect less and death preventiting herbal medicine for malignant cancer by Immunepathy"

681 /CHE/2004 Dr. Malisraj Samual , 14 , Film Streat , Annal Indira Nagar , Velachery, Chennal - 600 042 , T.N. India ;, India: " Sideffect less and life prolonging 48 herbe harbal medicins for alds patients , by Immunapathy"

882/CHE /2004 VASUDEVAN NAIR ASHOK KUMAR , T.C. 15/850-1 , Vasudha , Vazhuthacaud , Trivandrum - 885 010 , Kerala , India: " A PALM MATE"

883/CHE/2004

Mr. C.V. Nagaraja Rao , Aquatyte Engineers , # 28 , Mallikarjuna Temple Road, Baravanagudi Road, Bangalora- 660 004 , India;, India : "Vertical Shaft Wind Turbina " 753 THE GAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

PART III-SEC. 2]

684/CHE/2004

Dr. Thomas Thomas N. U.S.A . ;; " Methode of treatment using Mac-A and Mac-B inhibitos such L -Deprenyl"

685/CHE/2004

Dr. Thomas Thomas N. U.S.A. ;; "Method of treatment using Mao-A and Mao-B inhibitors such as L-Deprenyl"

686/CHE/2004 Dr. Thomas Thomas N. U.S.A. ;; " Compositions and methods to prevent toxdolty of antinflammatory agents and enhance their efficacy"

687 /CHE/2004

Dr. P. Parikumar and Dr.A.8. Karthikeyan , 30D , By Pass Road, Dharmapuri - 636 701 , T.N. ; , India: " Dynamic multifocal spectacle frame"

688/CHE/2004

ISKRAEMECO, SLOVENIA;, 15/07/2003 , Slovenia; "WATTHOUR -METER MEASURING CIRCUIT INCLUDING A DETECTION OF AN INCORRECT LINE CONNECTION"

689/CHE/2004

LIEBERT CORPORATION , U.S..A :, 18/07/2003 , United States of America; "MULTI - PASS PARALLEL- TUBES HEAT EXCHANGER"

690/CHE/2004

Z & J Technologies GmbH , Germany;, 23/07/2003 , Germany; "Device for the distribution of loose material into at least two hoppers arranged above the mouth of ablast furnace"

691 /CHE/2004

Samsung Electronics Co. Ltd , India Software Operations (8180) Korea;; "Method for controlling two or more anycast machines placed on the samelink"

692/CHE/2004 Samsung Electronics Co. Ltd , India Software Operations (S180) Korea;; "Method of enhanced remote facsimile data printing"

693/CHE/2004 Samsung Electronics Co. Ltd , India Software Operations (8180) Korea;; "A method to enhance text to speech features in w30 smil2.0 recommendation "

SNECMA MOTEURS , FRANCE;; " Holding system for a rotor end plate "

894/CHE/2004

696/CHE/2004 Dr. Reddys Laboratory Ltd , 7-1-27, Ameerpet , Hyderabad - 500 018, A.P. ; , India; "Universally movable mirror with packaging"

696/CHE/2004 Dr. Reddys Laboratory Ltd, 7-1-27, Amserpet , Hyderabad - 500 016 , A.P.; , India; "Anticounterfeiting device utliizing seethrough mark"

697/CHE/2004 Dr. Reddys Laboratory Ltd, 17-1-27 , Ameerpet , Hyderabad - 500 016, A.P. ; , India; "Smooth and light touch bralile cells or dots on bileter"

698/CHE/2004 Mr. 8. Kumar , No. 1 , Second Street , Padmanabha Nagar , Adyar , Chennel - 600 020, Indie;, India ; " PSK ( Pneumatic, Saturation anmd Kondensation ) Process and system for producing good quality water in large quatity from sea/brackleh water with flue gas"

699/CHE/2004 Mr. Hallimysore Venkatakrishna Avadhani Lakshmi Keshavamurthy , Harsha & Hallimysore Lakshmikeshava Murthy Vidya , Bangalore ;, India; "A novel system of lo engine using unconventional fuel "

700/CHE /2004

Mr. Vayalombram, Maniyath Unmesh , Salshsyam , Kadirur Post - 670 642, India;. India: "Opto aalde level sensorDensor ( OALS ) System"

701/CHE/2004

M/s . Suven Life Sciences Limited , of Serene Chambers , Road No: 7 , Banjara Hills, Hyderabad - 500 034, A.P. India;, India; "Tatrsoyolio benzothiazinoindoles and their use in therapy"

702/CHE/ 2004

M/ s. Suven Life Sciences Limited, of Serene Chambers , Road No. 7, Benjara Hills, Hyderabad - 500 034, A.P. India;, India ; " Aminoalkary Indoles and their use in therapy"

703/CHE/2004

M/s . Suven Life Solences Limited , of Serene Chambers , Road No. 7,7, Banjara Hills, Hyderabad - 500.034, A.P. India ;, India ; "Tetracyolic aminoalkoxy Indoles and their use in therapy"

704/CHE/2004

MASCHINENFABRIK RIETER AG , SWITZERLAND;, 22/07/2003; 23/07/2003, Switzerland Cote divoire; "Textile machine with rotating rings and bobbins" 705 /CHE/2004

Indian Institute of Technology, IIT P.O. Chennal - 600 036 , T.N. India;, India; "A multi axisi fatigue testing machine "

706/CHE/2004

M/s . Natco Pharma Ltd. , Natco House , Road No. 2, Banjara Hills, Hyderabad -800 033 , A.P . ; . India; "A novel stable alpha2 orystal form of Imatinib mesylate & a pharmaceutical composition containingIt" 7540

THE GAZETTE OF INDIA , OCTOBER 2, 2004 ( ASVINA 10, 1926)

[PART III-SEC. 2 707/CHE/2004

MR . RUSSELL HENRY KELLY, NEW ZEALAND;; " A Filtration system"

708/CHE/ 2004

Ms. N. M. Hamasana Nandhial , Mr. N.M. Vijay, Ms. Bhuja , M 9/A, Raja Lane , Periya Chetty Street,reet , Tiruchy - 620 008, Τ.Ν. ; .T.N . ; , India : "Making of new geometrical Instruments by applying new foolproof concept of plotter holes "

708/CHE/2004

CENTRE FOR DNA FINGERPRINTING AND DIAGNOSTICS (CDFD), Hyderabad, A.P. India;, India; " Regions of high antigenioltywith the hypothetical pre_mptr Rv2608 orf show a differential humoral- response and a low t cell response in various categories of tb patients "

710 / CHE/2004

CENTRE FOR DNA FINGERPRINTING AND DIAGNOSTICS (CDFD ), Hyderabad , A.P. India;, India : " M.tb ISOCITRATE DEHYDROGENASES DISPLAY STRONG B- CELL RESPONSE AND DIFFERENTIATE BCG- WACCINATED HEALTHY CONTROLS FROM TB PATIENTS"

711 / CHE /2004

Mr. Soma Raju &Ms. Shanmuga Priya Natarajan , Plot No. 11 , Ashok Manipuri , Kepra Municipal Office Road , ECIL. , Hyderabad - 500.062, India;, India; "New modified novel catalyst system for phenolic foam"

712 / CHE/ 2004

M/ s . Natco Pharma Ltd. , Natoo House , Road No. 2, Banjare Hiiia , Hyderabad -500 033 , A.P . ; , India; "A process for the preparation of a novelnovel stable alpha2 , crystal form of Imatinib mesylate"

713 /CHE/2004

Mr. Shareefa Talha , 34, Custian Beach Road, Santhome, Chennal - 600.004, India; India: "A novel harbal food composition for overcoming fron deficiency in anemic patients"

714/CHE/2004

Mr. Cheloor Krishnan Nair Unnikrishnan Nair , Mr. Varkey Mathew , Mr. Padmanabhan Sivasankaran , Ushus , Andoor , Marangattupally Post - 686 635, Kottayam Diet , Kerala , India; "Manufactureof paper- like packing and packaging material made of wastes of plantain and banane plants"

715 /CHE/2004

Samsung Electronics Co. Ltd, India Software Operations (SISO ) Kores ;; "Method of providing a digital signal processor with an effective user interface using a using a graphical editor"

718 /CHE/2004

Samsung Electronics Co. Ltd , India Software Operations (8180) Korea: " System and method for dynamically shifting of beaconsbeaporite in distributeddierbed wirewireless networks" 717 /CHE/2004

Roy T.G. S /o. George, Thazhath House, Palliakkere, Chittissery Post, Triepur - 680 301;, India; "RubberAuto Tap"

718 /CHE/2004

Mr. Sreekumar B, Sripadam , T.C. 14/1581 Ollukkara Post, Trissur - 680 656;, India; "Real gard automatic voltage protector"

719 /CHE/2004

Mr. Balu Sugathan , 8/o . Mr. K:G , Balan , Kunnezhth House , Kottarakkave Post, Mavalikkara - 690 101 , Alappuzha Dist;, Indie; "VLAD Switch ( Vehloles Light Automatic Dim Switch) "

720/ CHE / 2004

Mr. D.S.N.V. Prasad , Plot No.16, Road No. 2, Herlpuri Colony, Saroor Nagar, Hyderabad , A, P. ; , indla; "SAVE"

721 /CHE / 2004

Lanson Bio Tech Private Limited, 34, Poonamalee High Road , Koyambedu , Chennal 600 107 , India ;, India ; "Anti retroviral , herbal formulation "

722/CHE/2004

India Nippon Electricals Limited, Hosur , T.N. India;, india ; "A fuel injection system for a motor vehicle"

723 /CHE/ 2004

MASCHINENFABRIK RIETER AG , SWITZERLAND;, 28/07/2003 , Switzerland Cote divoire; " Textile machine with rotating rings a rings and bobbins"

724/ CHE/ 2004

HAUNI Maschinenbau Aktiengesellschaft , Germany,, 28/07/2003 , Europe; "Delamination of tobacco balee"

725/CHE/2004 Mr. Anil Kumar , & Mr. Rajeev Bachu , 146 , 9th Main , BEML Layout, RajaRajeshwari Nagar, BangaBangalore - 580 039;, India; " A method for automated discrete authenticetion , session management and interface translation for remotely accessing networked devices and systems

726/CHE/2004 Mr. Anil Kumar, & Mr. Manoj Kumar Singh , 146, 9th Main , SEML Layout , Raja Rajeshwari Nagar , Sangalore: 560-039;, India ; "A new method for mall arrival notification in network architectures involving mall servers"

727 /CHE/2004 Mr. Sajeev Singh . M.K. Geetha Bhavan, Kottapuram , P.O. Vizhinjam , Thiruvanathapuram - 695 521 , Kerela, india;, india ; "Stainless writing board" 7548 PART III-SEC. 2]

THE GAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

728 /CHE/2004

Taj Engineering & Company , Plot No. 21 , Industrial Area , Near Shaheed Smarak School , Bhanpuri , Rajpur - 493 221 ;, India; "Method and apparatus for making flakes"

729/CHE/2004

Acharya N.G. Ranga Agricultural University, Rajinder Nagar, Hyderabad - 500 030 , A.P. India;, India; "Machinery & process of manufacturing of cane jaggery in onyetal form"

730/CHE/2004

Ross Operating Valve Company, U.S.A. ; , 31/07/2003 , United States of America; "Deformed O- ring face seal for pneumatic valves"

731/CHE/2004

Mr. Krishnamachari Ramu and Ms. Lavanya Ramu , New No. 10, Old No. 26C, Melony Road, T.Nagar , Chennal - 600 017;, indla; " Low glycemic sweets"

732/CHE/2004 Mr. M. Madanagopal , S/o . Late D. Muthuraju , Old No. 55, New No. 39 , HIG - HF, New Temple Land Hudoo, Hosur -635 125, Krishnagiri Dist , T.N . ; , India; "Emergency wheel attachment (s ) for cycles and motor cycles" .

733/ CHE/2004

Daimia Centre for Research & Development , an Indian Institute of B - 133 & 134, Paripoorana Estates , Sundakkamuthur Post , Coimbatore - 641 010, T.N. India;, India; " A flavoured chewing gumlet and a prooses of manufacturing the same 734/CHE/2004

Mr. C. Rangasamy & Mr. Mohamed Jaweed , No. 640, Poonamallee High Road.. Aminjikaral , Chennai - 600 029;, India ; " Fuel less electronic generator"

735/CHE/2004

KIM , Korea;; "Asphalt concrete additive and process for preparing asphalt concrete using the same

736/CHE/2004

INVENTIO, Switzerland;, 31/07/2003, Europe; "Drive equipment for escalator step or moving walkway plate"

737 /CHE/2004

INVENTIO, Switzerlend ;, 31/07/2004; 01/08/2004, Burope: "Drive equipthent for escalator step or moving walkway plate"

738/CHE/2004

SAUDI BASIC INDUSTRIES CORPORATION , SAUDI ARABIA;, 01/08/2003, United States of Ameries; "Toluene methylation prooвев "

730/ CHE/2004

TADIRAN SPECTRALINK LTD . ISRAEL;, 28/07/2003 , United States ofAmerios; "System and method for munition Impact assessment"

740/ CHE/2004

ABB Research Ltd., Switzerland,, 13/06/2003, Europe ; "Encapsulated switching devices having heat emission elements"

741 /CHE

TVS MOTOR COMPANY LIMITED , AUSTRIA;; " Inerta brake dynamometer" 742/CH

LANG EQUIPMENT INESEARCH CENTRE , R.B.ND. 1818 , DOORAVANINAGAR BANGALORE - 800 016, INDIA;,Indie; " A device for leakage detection in a self- closing valve of an ing cyclinder"

743 /CHE2004

Rose Operating Vaive Company, U.S.A. ; , 12/09/2003 , United States ofAmerica; "Dynamically- monitored double valve with anti- tledown feature"

744/CHE/2004

DANA CORPORATION , U.S.A. , ; , 01/06/2003 , United Kingdom ; " Limited alip differential sasembly"

10 7542

THE GAZETTE OF INDIA, OCTOBER 2 , 2004 (ASVINA 10 , 1926)

[PART III-SBC. 2 ALTERATION OF DATE UNDER SECTION 16

194181 ( 168 /CAL/ 2003 ) ANTEDATED TO 15-07-1997,

194182 ( 392 /CAL/ 2002 ) ANTEDATED TO 06-01-1997 ,

194215 ( 953 /MUM/2001 ) ANTEDATED TO 10-09-1999.

194221 ( 27 /MUM/ 2003 ) ANTEDATED TO 24-01-2001 .

194222 ( 24 / MUM/ 2003 ) ANTEDATED TO 24-01-2001 .

194223 ( 23 /MUM/ 2003 ) ANTEDATED TO 24-01-2001 .

194224 ( 26 /MUM/ 2003 ) ANTEDATED TO 24-01-2001 .

अभिगृहित पूर्ण विनिर्देश

एतद्‌द्वारा सूचना दी जाती है कि आवेदनों में किसी पर पेटेंट अनुदान का विरोध करने वाले इच्छुक व्यक्ति राजपत्र के इस निर्गमन की तिथि से चार महीने के भीतर या उक्त चार महीने की समाप्ति के पूर्व, प्ररूप 4 में यदि आवेदित किया हुआ हो , तो परवर्ती एक महीने के भीतर, किसी समय , नियंत्रक, पेटेंट को ऐसे विरोध की सूचना प्ररूप 7 में उपयुक्त कार्यालय में दे सकते हैं। विरोध का लिखित कथन साक्ष्य के साथ, यदि कोई हो, दो प्रतियों में उक्त सूचना के साथ या अगले दो महीने की अवधि के भीतर दाखिल किया जाए । इस संदर्भ में , यथा संशोधित पेटेंट अधिनियम, 1970 की धारा 25 एवं पेटेंट मियम, 2003 के नियम 55 से 57 का अवलोकन किया जा सकता है । उपयुक्त कार्यालय द्वारा विनिर्देश एवं चित्र आरेख , यदि हो, के छायाप्रति की आपूर्ति छायाप्रति शुल्क के रूप में प्रति पृष्ठ रु. 4/ - की अदायगी पर की जा सकती है ।

COMPLETE SPECIFICATION ACCEPTED

Notice is hereby given that any person interested in opposing the grant of a Patent on any of the Applications , may, at any time within four months from the date of this issue of Gazette or within further period of one month if applied for in Form 4 before the expiry of the said period of four months , give notice to the Controller of Patents at the Appropriate Office on Form 7 of such opposition . The Written Statement of Opposition accompanied by evidence , if any, should be filed in duplicate along with the said notice or within further period of two months . Section 25 of The Patents Act, 1970 as amended and Rules 55 to 57 of The Patents Rules, 2003 may be referred to in this regard.

Photo copies of the specification and drawings , if any, can be supplied by the Appropriate Office on payment of photocopying charges @ Rs . 4/ - per page.

7543 THE GAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

PART III-Sac, 2]

C11D 3/20

C11D 3/39 C11D 1/75

ant . Cl

194171 Ind. Cl

Title

GRANULAR COMPOSITION BASED ON 8 PHTHALIMIDO PER- OXYHEXANOIC ACID UTILIZED IN DETERGENT FORMULATIONS .

Applicant

AUSIMONT S.P.A OF PIAZZETTA MAURILIO BOSSI 3 ,

MILANO, ITALY

1. PIERO UGOBIANCHI

Inventor

2. CLAUDIO CAVALLOTTI

3. CLAUDIO TROGLIA

2487 /CAL/ 1997 FILED ON 31.12.1997

CONVENTION NO.MI97A00005 FILED ON 03.01.1997 IN ITALY. )

Application no (

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003) PATENT OFFICE KOLKATA.

13 CLAIMS,

Granular composition comprising 8 - pthalimido peroxy- hexanoic acid (PAP) , & N- oxids of a tertiary amine surfactant and an organic acid with PKA lower than 3.5 and soluble in water at most for 1 % by weight at a temperature of20°C.

Drawing : NIL

CompleteSpecification : 15 pages.

7544

[PART III-SEC. 2 THE GAZETTE OF INDIA, OCTOBER 2, 2004 ( ASVINA 10, 1926)

G05B 17/00 B21B 37/00

Int . Cl ' :

194172 129J

Ind. Cl

Title

METHOD AND DEVICE FOR PRECALCULATING INITIALLY UNKNOWN PARAMETERS OF AN INDUSTRIAL PROCESS SIEMENS AKTIENGESELLSCHAFT OF .

Applicant :

WITTELSBACHERPLATZ 2 , 80333 , MUENCHEN, GERMANY Inventor

1. DR . EINAR BROSE

2. DR . OTTO GRAMCKOW

3. DR. MARTIN SCHALANG

4. GUNTER SORGEL

1780/CAL/ 1997 filed on 24.09.1997

Application no

( CONVENTION NO.19641432.6 FILED ON 08.10.1996 in GERMANY. )

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003) PATENT OFFICE KOLKATA .

11CLAIMS .

Method for pre - calculating initially unknown parameters (34) of an industrial process , in particular a piant in the basic materials industry, having parameters that vary, in particular abruptly, the initially unknown parameters (3 ) to be predicted being determined by means of a process model as a function of initially known parameters ( 1 ) of the process , and the process model having at least a global process model ( 5) , which constitutes a time - averaged image of the process , and at least one specialized process model (6) , which constitutes an image of the process for a specific operating state of or working point that is determined by means of the initially known parameters ( 1 ) .

Drawing :1sheets

CompleteSpecification : 10 pages.

7545 THE GAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

PART III -SHC. 2]

Int. Cl ' :

A61M 005/00

194173 128 F

Ind . Cl

Title

A SELF - DESTRUCTING DISPOSABLE SYRINGE

: LIFECARE AS , OF KLEIVA 20, N- 6900 , FLORO, NORWAY Applicant

OLAV ELLINGSEN

Inventor

97 /CAL/ 1998 FILED ON 20.01.1998

Application no

(CONVENTION NO.970576 FILED ON 07.02.1997 IN NOWAY)

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003) PATENT OFFICE KOLKATA.

SCLAIMS

Aself-destructing disposable syringe comprising:

a syringe housing ( 1 ) ;

a plunger with a plunger rod (2) and a plunger head (3) with seal (3') ; and an injection needle(4);

an extension (7) running from the external end wall (5) of the heusing (1 ) is provided with inwardly bendable flaps(8) ;

aholder (6) located centrally in said housing ( 1 ), sald holder having a central bore (9) and a flange ( 10 ) formed at the end facing the plunger head(3);

said flange having a liquid -tight seal ( 11 ) against the liquid chamber (12) of sald housing (1 ) ;

awholly or partly tapered part ( 18) of said holder extending inside said extension (7) of sald housing (1 ) ;

said tapered part comprising an end bead ( 16) having an inverted collar (17) for Interaction with , and reterition of the inwardly bendable flaps (6) on said extension (7) of said housing ( 1 ) ;

sald injection needle (4) extending through the bore (9) of the holder (8); an end sleeve (22) which is coaxial with and intimately surrounding sald extension (7) , said extension and end sleeve are integral with each other ;

characterized in that

retraction means (18, 13, 14, 20) is provided in sald housing ( 1 ) for retracting said needle (4) inside the syringe housing ( 1 ) after use.

4-267 G1 /2004 7546

[PART III-SEC. 2.

THE GAZETTE OF INDIA , OCTOBER 2 , 2004 ( ASVINA 10, 1926)

152116

61,

오

ين

CompleteSpecification : 12 pages. Drawing: 6sheets 7547 PART III-SEC . 2]

THE GAZETTE OF INDIA, OCTOBER 2, 2004 ( ASVINA 10, 1926)

C09K 3/14

Int. Cl'

194174 32C

Ind.Cl

HIGH - PRESSURE MELAMINE MANUFACTURING PROCESS Title

Applicant

EUROTECNICA CONTRACTORS AND ENGINEERS SPA OF CORSO BUENOS AIRES NO . 63 , I 20124 , MILANO ITALY

NOE SERGIO

Inventor

1055 /CAL/ 1998 FILED ON 15.061998

Application no

(CONVENTION NO . M197A001524 FILED ON 27.6.1997 IN ITALY)

PATENT OFFICE KOLKATA.

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003)

10CLAIMS.

High-pressure melamine manufacturing process starting from urea with high yields and conversion rates characterized in that it comprises the following steps:

a)urea is fed to a reactor (3 ) essentially containing molten melamine, which reactor operates incontinuous and is kept at a temperature in the range of360 an 420°C under a pressure higher than 7x10 kPa and preferably 8x10 to 9x10 kPa, while a vigorous mixing is provided by evolving gases;

b) liquid reaction product is recovered containing 85 to 95%, preferably 88 to 93% melamine and a gaseous phase is removed containing essentially CO2 and NH3 ;

c) liquid phase collected in b) is continuously fed, together with fresh NH; to a tubular reactor (4) , (4 and 9 ) in which the essentially whole volume is occupied by the liquid phase (plug flow reactor) without any mixing of the reaction product with reactants nor the intermediate products (no "back mixing "), kept at a temperature of 360 to 450 °C and under a pressure higher than 7x10 kPa for a residence time sufficient to complete thereaction;

d) melamine with a high purity level is collected from the outlet of the tubular reactor.

Drawing:2 sheets

CompleteSpecification : 17 pages.

7548

[PART III-SEC. 2 THE GAZETTE OF INDIA, OCTOBER 2 , 2004 ( ASVINA 10, 1926)

Int . Cl7

H04B 1/00 HO4R 25/00

194175 Ind. Cl

187

Title

AN IMPROVED LOUDSPEAKER E.G FOR VEHICLES

Applicant A

NOISE CANCELLATION TECHNOLOGIES , INC . OF

1025 , WEST NURSERY ROAD, LINTHICUM, MARYLAND 21090 , USA

1. GLENN E. WARNAKA

Inventor :

2. MARK E. WARNAKA

3. MICHAEL J PARRELLA

792/CAL/1998 FILED ON 04.05.1998

Application no

( CONVENTION NO.08 /854589 FILED ON 12.5.1997 IN USA. )

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003) PATENT OFFICE KOLKATA.

37 CLAIMS.

An improved loudspeaker e.g. for vehicles, comprising:

a transducer capable ofbeing excited by applied electric potential ;

a diaphragm that is driven by the excited transducer , said diaphragm being comprised ofa trim panel of a vehicle, wherein said trim panel has a substantially smaller area than a headliner of the vehicle;

a coupler element, having a larger surface area than said transducer, that improves mechanical matching and coupling of said excited transducer to said trim panel , wherein said trim panel has a mechanical impedance that is substantially matched to that of the transducer by said coupler element; and

thereto. electronic means electrically connected to said transducer to apply electric potential

Drawing :8 sheets

CompleteSpecification : 20 pages.

7549 THE GAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

PART III-SEC. 2]

194176 : H01B 11/18 , 13/00

Int. Cl'

48A1

Ind. Cl

COAXIAL CABLE AND METHOD OF MAKING SAME

Title

Applicant : COMMSCOPE INC, OF 1375 , LENOIR - RHYNE BOULEVARD , HICKORY, NORTH CAROLINA 28603- 0339, USA

1. ALAN N. MOE

Inventor :

2. BRUCE J CARLSON

SCOT M ADAMS

4. RONALD VACCARO

1299/CAL/ 1998 FILED ON 27.07.1998

Application no

(CONVENTION NO. 08/911 , 538 FILED ON 14.08.1997 IN USA)

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003) PATENT OFFICE KOLKATA.

20 CLAIMS.

Acoaxial cable comprising a cylindrical plastic rod, an inner conductor surrounding said plastic rod, a foam polymer dielectric layer surrounding the inner conductor, and a tubular metallic outer sheath closely surrounding the foam polymer dielectric layer.

SHEET

Drawing:3 sheets

CompleteSpecification : 25 pages.

7550

[PART III-SBC. 2 THE GAZETTE OF INDIA, OCTOBER 2 , 2004 (ASVINA 10, 1926)

Int. Cl'

G01B 21/02, G06G 7/58

194177 Ind . Cl

206 - E

Title

SYSTEM FOR ONLINE ELONGATION MEASUREMENT AND OFF -GAUGEDETECTION FOR QUALITY APPRAISAL OF STEEL STRIP DURING SKIN PASS ROLLING

Applicant :

STEEL AUTHORITY OF INDIA LIMITED, OF DORANDA , RANCHI - 834 002 BIHAR, INDIA

Inventor :

1. SHARAN ARCHANA

2. KHAN SUSHIL CHANDRA

3. PRASAD ANUP

4. KUMAR DEEPAK

5. ILANGOVAN SHANMUGAM

Application no

177/CAL/ 2000 FILED ON 24.03.2000

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003) PATENT OFFICE KOLKATA.

16.CLAIMS.

A system for on - line measurement of elongation imparted to a strip subjected to rolling in a skin pass mill having an input side and an output side, an uncoiler means on the input side and a coiler means on the output side, a main stand between the coiler and uncoiler means for effect skin pass or temper rolling, the system comprising measurement means , provided on either side of the main stand, said measurement means being provided with means for sensing the physical parameters of the strip and generating pulses representative of such parameters , means for processing such pulses and for measuring and indicating elongation factor for quality appraisal .

Minin and

Meesurement Flott

Meeeurenent Roll Da

Caller

Sheft

Counter 22

Counter21

Drawing:5 sheets

Complete Specification : 20 pages.

7551 THEGAZETTE OF INDIA, OCTOBER 2, 2004 ( ASVINA 10, 1926)

PART III-SEC . 2]

194178 E02F 3/18 , 3/26, 9/20

Int. Cl'

71C, 71E

Ind. Cl

BUCKET WHEEL DEVICE

Title

SIEMENS AKTIENGESELLSCHAFT OF

Applicant

WITTELSBACHERPLATZ 2, 80333 , MUENCHEN, GERMANY KARL - HEINZ GERLACH

Inventor

853/CAL/1998 FILED ON 12.05.1998

Application no

(CONVENTION NO. 19729548.7 AND 19737858.7 FILED ON 10.7.1997 AND ON 29.8.1997 IN GERMANY. )

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003) PATENT OFFICE KOLKATA.

16.CLAIMS.

Abucket-wheel device (24,50 ) , comprising,

a handling means (22,23,72, 74( for at least one of picking up piled up bulk goods from a stockpile (20 ) and piling up the bulk goods on the stockpile (20);

ameasuring means (21,30) measuring a surface profile of the stockpile (28);

characterized in that a control means (34 , 73) controlling said handling means (22,23,72,74) to automatically move up to one of a desired removal position and a desired stockpiling position as a function of the measured stockpile surface profile.

-22

Drawing:5 sheets

CompleteSpecification : 13 pages.

7552

[PART III-SBC. 2 THE GAZETTE OF INDIA , OCTOBER 2, 2004 ( ASVINA 10, 1926)

Int. Cl ' :

H01L 21/00 , 21/44 , 21/48 , 23/40

194179 Ind. Cl

113C; 136E

Title

MOUNTING STRUCTURE FOR SEMICONDUCTOR DEVICES AND PROCESS FOR PRODUCTION THEEOF

Applicant :

HENKEL LOCTITE CORPOARATION OF 1001 TROUT BROOK ROCKY HILL , CONNECTICUT 06067 , USA MATSUSHITA ELECTRIC INDUSTRIAL CO.LTD , OF 1048 , KADOMA , OSAKA 571 , JAPAN

Inventor :

1. KAZUTOSHI IIDA

JON WIGHAM

3. MASAKI WATANABE

4. TAKESHI MEGURO

2463/ CAL/ 1997 FILED ON 29.12.1997

Application no

( CONVENTION NO.6575 / 9 FILED ON 17.01.1997 IN JAPAN. )

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003) PATENT OFFICE KOLKATA.

21 CLAIMS.

A mounting structure for semiconductor devices , comprising :

a semiconductor device comprising a semiconductor chip mounted on a carrier substrate , and a circuit board to which said semiconductor device is electrically connected ,

wherein the space between the carrier substrate of said semiconductor device and said circuit board is sealed with a reaction product of a thermosetting resin composition comprising 100 parts by weight of an epoxy resin , such as herein described , 3 to 60 parts by weight of a curing agent , such as herein described and 1 to 90 parts by weight of a plasticizer , such as herein described .

5 Complete Specification : 23 pages. Drawing: 2 sheets 7553 THE GAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

PART III-Sac. 2]

Int . Cl

194180 B64F - 1/ 18 , 1/20

113 E, 4A3 , 4A

Ind. Cl

Title

LIGHTING DEVICE FOR SIGNALLING , DESIGNATING ORMARKING

Applicant :

SIEMENS AKTIENGESELLSCHAFT OF WITTELSBACHERPLATZ 2, 80333, MUENCHEN , GERMANY ::

Inventor

JEAN - CLAUDE VANDE VOORDE

1276/CAL/ 1997 FILED ON 07.07.1997

Applicationno

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003) PATENT OFFICE KOLKATA.

45 CLAIMS

Flush- marker light for signaling on and identifying traffic areas, having light sources designed as semiconductor elements ( 1 ) , for example as light-emitting diodes (LEDs ) or as light-emitting polymers , different semiconductor elements ( 1 ) being provided in the form of clusters which in each case emit light of different colours , characterized in that the flush- marker light is suitably designed as an airport flush- marker light which can be rolled over by aircraft and is intended for lighting take-off runways , landing runways , taxiways and the like and has a control device (22) with a pulse- width- modulation device (24) by means of which thethe electrical energy fedfed to the semiconductor elements ( 1 ) can be regulated and the iod and the intensity of the light emission of the semiconductor elements (1 ) can thereby be varied in a controlled fashion.

Drewing 113 sheets

Complete Specification : 30 pages.

5-267 01/2004 7554

THE GAZETTE OF INDIA , OCTOBER 2, 2004 (ASVINA 10, 1926)

[PART III-SBC. 2 Int. Cl7 :

C08K-3/00

194181 Ind . Cl

129G, 33H

Title

A PROCESS FOR PRODUCTION OF A FERRULE OR FEEDING HEAD AND SUPPLY ELEMENT FOR CASTING MOLDS WHICH ARE EXOTHERMIC AND APPROPRIATE FOR NODULAR CASTING

Applicant

IBERIA ASHLAND CHEMICAL , S.A. OF A MUELLE TOMAS DE OLABARRI 4-3 , 48930 , LAS ARENAS - GUECHO(VIZCAYA), SPAIN

Inventor

1. FERNANDEZ TOMAS POSADA

2. GERENABARRENA RAFAEL SAMPEDRO

3. MARURI FRANCISCO JOSE DIAZ

4. URRESTIETA JAIME PRAT

5. URTEAGA JOSE JOAQUIN LASA

6. HERNANDEZ LUIS IGLESIAS

Application no 168/CAL/2003 FILED ON 17.03.2003

(CONVENTION NO.9601607 AND 9701518 FILED ON 18.7.96 AND 8.7.1997 IN. SPAIN RESPECTIVELY. )

(DIVIDED OUT OF NO . 1329/CAL/ 1997 ANTEDATED TO 15.7.1997) APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003) PATENT OFFICE KOLKATA.

6.CLAIMS.

Aprocess for the production of a ferrule or feeding head and supply element for casting molds which are exothermic or insulating and appropriate for nodular casting, said process comprising:

insertion in the molding die of an insert made up of a mixture which comprises oxidizable metals, such as herein described, oxidants, such as herein described, and Inorganic fluorine fluxes , such as herein described, and optionally, aluminlum sliicate hollow micro beads or other appropriate element for thinning oradjusting the exothermicity, the weight of the insert being between 5 and 20% of the total weight of the ferrule or feeding head and supply element , which insert acts as initiator of the exothermic reaction ; and

biowing Inside the molding die a mixture of aluminium silicate hollow micro beads , with an alumina content of between 20 and 38 % weight, oxidizable metals and oxidants , together with an agglomerant, whereby the insertbecomes partially embedded in the mass of the ferrule or element.

CompleteSpecification : 22 pages. Drawing 2 sheets PART III-SEC . 2]

7555 THE GAZETTE OF INDIA, OCTOBER 2, 2004 ( ASVINA 10, 1926)

Int. Cl' :

D21H - 11 /00 13/16 , 15/10 & 21/40

194182 Ind. Cl

154 A

Title

AMETHOD FOR PRODUCING A SECURITY DOCUMENT Applicant

PORTALS LIMITED OF 6 AGAR STREET, LONDON WC2N 4DE, UK

Inventor :

HOWLAND PAUL

FOULKES JONATHAN PAUL

Application no 392/CAL/02 FILED ON 28.06.2002 (CONVENTION NO.9600686.1 FILED ON 12.01.1996 IN UK) (DIVIDED OUT OF NO . 30/CAL/ 97 ANTEDATED TO 06.01.1997) APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003) PATENT OFFICE KOLKATA.

8CLAIMS.

A method of producing a security document , wherein security/ paper is produced by forming is the manner such as herein described , a papermaking suspension comprising cellulosic fibres and polyvinyl alcohol fibres wherein the cellulose fibres are present in an amount of at least sos by weight of the total weight of the fibres in the papermaking buspension, characterised in that the polyvinyl alcohol fibres are soluble in water at temperatures of from 95° to 100 insoluble below 35° C and are 3 to 5 mm in length, wherein a papermaking suspension comprising cellulosic fibres and the polyvinyl alcohol fibres le devetered through an embossed wire mesh , wherein the embossing creates a profile of peaks and troughs corresponding to the light and dark areas of the watermark , and the formed paper with the watermark feature after dewatering is dried and thereafter the resulting security paper is printed to form the security document .

Drawing: NIL

CompleteSpecification : 13 pages.

[PART III-SBC. 2 7556

THE GAZETTE OF INDIA, OCTOBER 2, 2004 ( ASVINA 10, 1926)

D01H 17/00 В 65H 63/06

Int . Cl?

194183 Ind . Cl

172D2(XX)

Title

AMETHOD FOR MANUFACTURE OF A CROSS - WOUND SPOOL ON A WINDING HEAD OF A WINDING MACHINE Applicant :

W. SCHLAFHORST AG & CO . OF POSTFACH 100435, D- 41004 , MONCHENGLADBACH, GERMANY

1. ROLF HAASEN

Inventor :

2. HERIBERT KARGEL

3. HANS -GUNTER WEDERSHOVEN

1492/CAL/ 1997- FILED ON 12.08.1997.

Application no

(CONVENTION NO.P19640184.4 FILED ON 30.09.1996 IN GERMANY. )

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003) PATENT OFFICE KOLKATA .

10CLAIMS

Amethod for manufacture of a cross -wound spool on a winding head of awinding machinewhereinthe threads running from a delivery spool to the winding spool being continuously monitored for cleaning of thread defects , edemprising the steps of

monitoring the running thread for defects and,and , wwhen a thread defect has been detected, interrupting the winding process by cutting the thread downstream ofthe detecteddefect thereby forming an upper threed with the defect extending tothe winding spool and a bottom thread extending from the delivery spool;

stopping the winding spool, determining the length ofthe upper thread woundontothe winding spool between the time ofthe detection ofthe defect andthe time of making the thread cut;

rotating thewinding spool in an unwinding direction for a predeterminable number of revolutions to unwind therefrom the defect ofthe upper thread;.

absorbing the uncoiled thread end from the winding spool into a suction pipe, sensing the presence ofthe thread end within the suction pipe;

stopping the unwinding of the thread end when the determined thread length hasbeen absorbed into the suction pipe;

inserting the absorbed thread end from the winding spool into a thread end jointing device with the thread defect disposed outside of the thread end jointing device to be cut and discarded;

inserting the lower thread from the delivery spool into the thread end jointing device;

splicing the upper and bottom thread while cutting and removing the defect oftheupperthread;

restarting the winding process;

and removal of the cross - wound spool from the winding head.

7557 PART III-SBC. 2]

THE GAZETTE OF INDIA, OCTOBER 2, 2004 ( ASVINA 10 , 1926)

21-

-20

15a

148

33a

30a

உ

28 2

22a

34a

28a

25-

12-

298

37-

8人

10-

-13

13a

FIG . 1

Complete Specification : 16 pages. Drawing: 2sheets 7558

THE GAZETTE OF INDIA, OCTOBER 2 , 2004 ( ASVINA 10, 1926)

[PART III-SBC. 2 ant. Cl :

F04C 18/04 F04C 29/00

194184 Ind . Cl

163A

Title

A SCROLL COMPRESSOR WITH REVERSE ROTATION SOUND ATTEUNATION

Applicant

COPELAND CORPORATION OF CAMPBELL ROAD, SIDNEY OHIO 45365-0669, USA

Inventor

1. KENNETH JOSEPH MONNIER,

2. FRANK SHUE WALLIS

3. RANDALL JOSEPH VELIKAN

1950/CAL/ 97 FILED ON 17.10.1997

Application no

( CONVENTION NO . 08 / 742,918 FILED ON 01.11.1996 IN USA)

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003) PATENT OFFICE KOLKATA .

14.CLAIMS.

A scroll compressor with reverse rotation sound attenuation comprising:

a non -orbiting first scroll member 74 having a spiral wrap 72 thereon;

an orbiting scroll member 42 having a spiral wrap 46 thereon;

a housing 18 for mounting said scroll members 74,42 so that said orbiting scroll member 42 orbits with regard to said non -orbiting scroll member 74 with the respective spiral wraps 72,46 of each scroll member engaging one another in such a way that pockets of progressively changing volume are created between said scroll members 74,42 in response to said orbital movement in a forward direction;

a powered rotatable shaft 24 normally rotating in a forward direction to cause said orbital movement in said forward direction ;

characterized in that a wedge cam 110 operatively associated with said orbiting scroll member 42 is provided for separating said spiral wraps 72,46 during extended operation of said compressor in a reverse direction , said cam 110 being responsive to an initial reverse rotation ofsaid shaft24 .

THE GAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

PART III-SBC. 2]

194184

Drawing 6 shoots

CompleteSpecification : 16 pages.

7560

THE GAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

[PART III-SEC. 2 Int. Cl'

GOIN 29/24 , 30/95 , 33/12

194185 Ind . Cl

126 D

Title

A SENSOR SYSTEM FOR DETECTING PRESENCE OF

:

DEOXIDIZING GASES

Applicant

INDIAN INSTITUTE OF TECHNOLOGY OF KHARAGPUR PIN CODE NO.- 721 302 , WEST BENGAL , INDIA

Inventor

1. DR . SUKUMAR BASU SOMENATH ROY

Application no

2. 436/CAL/2002 FILED ON 23.07.2002

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003) PATENT OFFICE KOLKATA.

24CLAIMS .

A sensor system for detecting presence of deoxidizing gases comprising:

1) substrate having a metal oxide coating adapted to adsorb oxygen on heating and resist current flow there through and to allow current flow there through in presence of said deoxidizing gases , ZnO and TiO₂ , preferablyZnO.

II ) heating means to provide requisite operating temperature for said oxide coating; and

iii ) electrodes operatively connected to facilitate current flow through said metal oxide in the presence of a deoxidizing gas to thereby sense presence of such deoxidizing gas .

CompleteSpecification : 12 pages. Drawing:3 sheets 7561 THE GAZETTE OF INDIA, OCTOBER 2, 2004 (ABVDNA 10, 1926)

PARTII Sec. 2)

H02G- 11/00

Int. Cl '

194186 Ind. Cl

Title

ABAX DATA TRANSMITTING APPARATUS IN A RADIO WAVE COMMUNICATION SYSTEM AND METHOD THEREOF

Applicant : LO BLECTRONICS INC, OF 20, YOIDO- DONG , YONGDUN GPO-KU SBOUL REPUBLIC OF KORBA

PARK SUNG IL

Inventor

693/CAL/2001 FILED ON 19.12.2001

Application no

(CONVENTION NO . 79919/2000 AND 79576/2001 FILED ON 21.12.2000 AND 14.12.2001 IN REPUBLIC OF KOREA . )

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003) PATENT OFFICE KOLKATA.

MCLAIME

Afax data transmitting apparatus in a radio voice communication system , compribing:

an MSC (mobile switching center) connected to a fax;

a fax data controller transmitting a fax data to a radio network through an IWF ( inter working function) instead of a vocoder when a fax signal is detected from the calling signal received from the MSC during & voice calling, and

a fax processing fax data transmitted through the radio network and performing a fax service.

START

RECEIVE A CALLING SIGNAL

CALLING SHONAL

SPATCH END CALLING SIGNAL

70 197

RESTORE/SERVICE FAX DATA

END

Drawing: 7sheets

CompleteSpecification : 26 pages.

6-267 01/2004 7562

THE GAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

[PART III-SBC. 2 Int . Cl ' :

C04B 35/00

194187 Ind . Cl

98F

Title

A SHIELD FOR REDUCING HEAT LOSS IN HOT ROLLED BARS IN STEEL PLANTS

Applicant : STEEL AUTHORITY OF INDIA LIMITED , OF DORANDA, RANCHI - 834 002 BIHAR, INDIA

Inventor :

PRAMOD KUMAR PRUSTY. 1.

2. APOORVA KUMAR MARIK

3. PARTHO PRATIM SENGUPTA

4. GANTI MAHAPATRA DAKSHINA MURTY

5. SUDHAKAR JHA

6. MRS . GALINA PETROVNA ROY

Application no 1395 / CAL/ 1997 FILED ON 25.7.1997

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003) PATENT OFFICE KOLKATA.

4CLAIMS.

Ashield for reducing heat loss in hot rolled bars in steel plants, characterised in that the shield comprises one outer rectangular metallic plate (9 ) and one inner rectangular metallic plate ( 10) ,which are held in position parallel to each other by anchor bolts and are ofadjustable dimensions , such as herein described, with a gap ( 11 ) between the plates , which is packed with heat insulating materials , such as herein described, the plates being held together firmly along the periphery, length, width and diagonal thereof by means ofmild steel structural angles (12), nuts and bolts , the shield being supported on beam (7) disposed before the finishing stand housing ( 6) and arranged to be held at a varying height above the roller table (4) used for hot rolling ofbars .

APURE RUN DOWN (6)

Fig2

100

150

100

TIME IN SECONDS

WITHOUT HEAT SHIELD WITH HEAT BHILD CompleteSpecification :8 pages. Drawing:3 sheets 7563:

THE GAZETTE OF INDIA, OCTOBER 2, 2004 (ASVIŅA 10, 1926)

PART III-SEC. 2]

H04L 9/08

194188

Int. Cl '

206- E

Ind. Cl

Title

Applicant :

AMETHOD FOR DATA PROTECTION HAVING AN AUTHENTICATION PHASE AND APPARATUS THEREFOR GIESECKE & DEVRIENT GMBH OF PRINZREGENTEN- STRASSE 159, 81677 , MUNCHEN , GERMANY

1. VOGEL KOLJA

Inventor :

2. BEINLICH STEPHAN

3. MARTINI ULLRICH

IN/PCT/2002/ 243 FILED ON 19.2.2002

Application no

(CONVENTION NO . 19940341.4 FILED ON 25.8.1999 IN GERMANY. )

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003) PATENT OFFICE KOLKATA .

26CLAIMS.

Verfahren zum Schutz von Daten, das eine Authentifizierungsphase mit folgenden Schritten aufweist:

(a) Bereitstellung eines biometrischen Merkmals;

(b) Digitalisierung des biometrischen Merkmals zur Erstellung von digitalisier- ten biometrischen Authentifizierungsmerkmalsdaten;

gekennzeichnet durch

(c) Entschlüsselung eines verschlüsselten Kodewortes anhand der digitalisierten biometrischen Authentifizierungsmerkmalsdaten;

(d) Wiederherstellung geheimer Daten mittels einer Entschlüsselung des Kode- wortes anhand der digitalisierten biometrischen Authentifizierungsmerk- malsdaten und anhand eines kodierungstheoretischen Korrekturverfahrens mit Korrekturkapazität, wobei die Korrekturkapazität frei wählbar ist.

7564

[PART BI-Sac. 2 THE GAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

Defying

Bigrue

Identifies h

Authentication

signe

Contaceas

Jesus certificates

CompleteSpecification : 21 pages 7565 THE GAZETTE OF INDIA, OCTOBER 2, 2004 ( ASVINA 10, 1926)

PART I -Sac. 2]

B19C 37/02

194189 Int. C17

Ind. Cl

APROCESS OF FORMING A TIP ON A INTRAVENOUS

Title

CATHETER

Applicant

JOHNON & JOHNSON MEDICAL, INC, OF 2500 ARBORRK BOULEVARD , ARLINGTON TEXAS 7600423130; USA

1. JAY M. PATEL

Inventor :

2. DENNIS BIALECKI

3. JOSEPH J. CHANG

2467/CAL/ 1997 FILED ON 29.12.1997

Applicationno

(CONVENTION NO.08/ 773942 FILED ON 30.12.1996 IN USA)

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003) PATENT OFFICE KOLKATA.

7CLAIMS.

A prosses of forming a tip on a intravenous catheter comprising the stepe :

s) mounting a tubular catheter (1) on a mandal (2) with (2) extending beyond the catheter (1 ) an mendrel b) hetja mold (3) having a tapered inner mold burtiss (7);

bwerting the catheter (1 ) and andret (2) two me wot (8) to

conform tothe

beyond the

the patheter (1) and mandel (2) from the mandrel (2) kom the catheter (1cbenteng

tarting the bath ( ng: a mulling purface (11 ) dardating an opening (10) beyond the editing surface (11 );

maning soutter (14) along said sulting surface (11) to severe the liding above bald wiele bout the trender of the estheter (1 ) to form trimmed catheter (1 ); and

h ) removing the trimmed catheter (1 ) from the Jig (9).

Drawing:1 sheet

CompleteSpecification :8 pages.

7566

THE GAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

[PART III-SBC. 2 Int . CI '

H01B 3/04 H02K 3/30 B05D 1/12 B05D 5/12

194190 Ind . Cl

Title

A PROCESS FOR PRODUCING IMPREGNABLE FINE MICA TAPES WITH A BUILT - IN - ACCELERATOR

Applicant

OSOVOLTA - OSTERREICHISCHE ISOLIESTOFFWERKE AKTIENGESELLSCHAFT , INDUSTRIEZENTRUM NO- SUD , A- 2355 , WIENER NEUDORF , AUSTRIA

Inventor

GSELLMANN HELMUT

2. HAFNER BERHARD

3. RABER MICHAEL

Application no IN /PCT/2000/ 85 FILED ON 16.6.2000

(CONVENTION NO. 98890305.0 FILED ON 16.10.1998 IN EUROPE. )

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003) PATENT OFFICE KOLKATA .

SCLAIMS.

Aprocess for producing impregnabia fine mica tapas with a built - in accelerator comprising the steps of:

sprinkling a powder enamel - resin eystem , such as herein described , on a fine mica film , the side of tha fine mica film which has bean aprinkled with the powder enamel being cemented to a carrier material , such as herein dascribed , under the influence of pressure and heat , sald powder enamel - resin system used, containing a curing agant , such as harein described, which cures at an elevated temperature when the fine mica film is cemented to said carriar material ,

winding said imprgenabla fine mica tape onto conductors of windings of alectrical machines , eaid conductors being impregnated with a solvent- free impregnation reein ; followed by

curing thereof under the action of heat: -

CompleteSpecification :7 pages. Drawing: 1 sheets 7967 THE GAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

PART III-SBC. 2]

A61K 038/16 038/17

Int . Cl '

;

194191 Ind . Cl

55F

Title

A PROCESS FOR PRODUCING PROTEINS HAVING

PRONOUNCED CONTRACEPTIVE ACTIVITY

Applicant

BOSE INSTITUTE OF 93/1 A.P.C ROAD , KOLKATA - 700009 WEST BENGAL, INDIA

Inventor

DR.DIPANKAR BHATTACHARYA

DR . PROF . PARIMAL CHANDRA SEN

501/CAL/2002 FILED ON 27.08.2002

Application no

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003) PATENT OFFICE KOLKATA.

10.CLAIMS.

Aprocess for preparing proteins of molecular masses between 12 and 13k Da such as herein described comprises in combination the following steps:

a) Homogenization of mammalian obtained from rodent, goat, sheep, pigand bovine sources in ice-cold buffer of pH varying between 7 and 8 of composition such as hereindescribed;

b) Centrifugation of the tissue homogeneate for 10-30 minutes ;

c) High - speed centrifugation of the supernatant fluid from step (b) for around 40-60 minutes;

d) Collection and storage of the supernatant fluid from step (c) called ' cytosol ' at low temperature;

e) Chromatographic fractionation of ' cytosol ' using ' sephaxex -G- 100 ' gel filtration pre- equillbrated with normal saline , discarding fractions collected in vold volume;

f) Rejection of first peak containing high molecular mass proteins and collection of second peak containing desired low molecular proteins and optionally followed by g) Conversion of the desired proteins into orally administrable dosage form in known manner.

Drawing : NIL

CompleteSpecification : 11 pages.

7568

[PART III-Sac. 2 THE GAZETTE OF INDIA, OCTOBER 2 , 2004 (ASVINA 10, 1926)

Int . Cl '

C12G 3/06

194192 17À

Ind.Cl

Title

PROCESS FOR PRODUCING LIQUORS HAVING AROMATIC PRINCIPLES RESEMBLING MUSK WITH A CHARACTERI- TIC TASTE AND MOUTH- FEELING

Applicant

SIKKIM DISTILLERIES LIMITED OF SAI BABA , RANGPO SIKKIM, 737132, INDIA

Inventor

MARZBAN NOSHIRWAN PAREKH

360./CAL/2001 FILED ON 29.6.2001

Application no

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003) PATENT OFFICE KOLKATA.

SCLAIMS

4 PART III-SHC. 2 ]

7369 THE GAZETTE OF INDIA , OCTOBER 2 , 2004 ( ASVINA 10 , 1926 )

Aprocessforproducing liquors having aromatic principles resembling musk with a characteristic taste and mouth - feeling, which comprises in combination - sorting, picking and grinding the following spices and herbs in amounts indicated against each one of them :

1) cardamon

12.5-18Kgs

11) mace

1.5-3Kgs

nutmeg

3-5 Kga

brown sandalwood

iv)

7.5-12.5Kga

white sandalwood

3.7.5-12.6Kgs

vi)

and

1.0-2.5 Kgs

saffron

aniseed

vii)

18.0-22.5 Kgs

b) adding to the ground mass a desired amount of honey of from around 40 to around 60 Kgs or the like sweetening agent and thoroughly mixing the same ;

c) soaking the mix obtained from step ( b) in neutral alcohol of 40% v/ v strength ;

d) allowing the entire mass to stand for around 15 days and agitating the same for around 30 minutes everyday by means of an agitator/churner ;

e) transferring the mass to a specially designed pot still and heating the same with an indirect source of heat under controlled conditions of temperature and pressure to give rise to a distillate ;

η blending thedistillate with requisite quantity of extra neutral alcohol , fruits spirit and demineralised water ;

ε) maturing the blend obtained from step ( vi) in wooden casks, vate or similar receptacles for a predetermined period and , if desired,

h) filtering and bottling the desired end product .

CompleteSpecification : 10 pages. Drawing:NIL

7-267 01/2004 7570

[PART III-SEC . 2 THE GAZETTE OF INDIA, OCTOBER 2, 2004 ( ASVINA 10 , 1926)

Int . Cl '

G11B 7/00 G11B7 /135

194193 Ind . Cl

147

Title

OPTICAL PICKUP

Applicant :

SAMSUNG ELECTRONICS CO.LTD OF 416, MAETAN - DONG PALDAL - GU , SUWON - CITY , KYUNGKI - DO , REPUBLIC OF KOREA

Inventor

CHUL - WOO LEE

Application no 1146/CAL/ 1997 FILED ON 17.6.1997

( CONVENTION NO. 96-31539 AND 967-31540 FILED ON 30.7.1996 IN KOREA. ) APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003) PATENT OFFICE KOLKATA .

7CLAIMS.

An optical pickup having a light source ( 120 ), an objective lens( 170) for converging light emitted from said light source( 120) on a recording medium ( 10 ), a holographic optical element (HOE ) ( 150) arranged along an optical path between said light source( 120) and sald objective lens( 170) , for changing traveling of the incident light , a phase delay plate ( 160 ) arranged between said HOE( 150 ) and the recording medium ( 10) , for changing a polarization direction of the incident light , and a photodetector( 180) for receiving the light reflected bythe recording medium(10) ,

-170

-160

126

180

150

136

Complete Specification : 16 pages. Drawing:8 sheets 7571 PART 111-SEC. 2 ]

THE GAZETTE OF INDIA, OCTOBER 2, 2004 ( ASVINA 10, 1926)

Înt. C17

C10B 37/02

194194 47E

Ind . Cl

Title

AN IMPROVED LEVELLER FOR LEVELLING AND COMPACTING THE TOP LAYER OF HTHE COAL BLEND CHARGED INTO A COKE OVEN

Applicant

STEEL AUTHORITY OF INDIA LIMITED , OF DORANDA , RANCHI - 834 002 , BIHAR, INDIA

Inventor :

MITHILESH KUMAR SHARMA . 1.

SHYAM SUNDAR BANDYOPADHYAY 2.

LAKSHMANAN PARTHASARATHY 3.

BISWAJIT ROY 4.

2013 / CAL/ 1997 FILED ON 27.10.1997

Application no

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003) PATENT OFFICE KOLKATA.

5.CLAIMS.

An improved leveller for levelling and compacting the top layer of the coal blends charged into a coke oven, characterised in that the leveller (9 ) is provided with a number of intermediately disposed and vertically downward hanging flaps ( 1 ) which are rotatably fixed at their upper horizontal edges (2 ) to a horizontally disposed cylindrical bar (3 ) which is attached rigidly to each steel strip. (4 and 5) of the leveller , and two stoppers (14 and 15 ) of which stopper (14) is disposed near the flat surface of each flap: (1 ) of the leveller facing the coke side ( 10 ) and stopper ( 15 ) 18 disposed near the flat surface of each flap (1 ) facing the ram side (11 ) of the coke oven for controlling the displacement of the lower horizontal edge, ( 8 ) of each flap (1 ) during the forward and backward strokes of the leveller along the length of the coke oven , in a manner , such as herein described .

7572

[PART III-SEC. 2 THE GAZETTE OF INDIA , OCTOBER 2 , 2004 (ASVINA 10, 1926)

-2

٣٩٣

Drawing:2 sheets

CompleteSpecification : 8 pages.

7573 PART III-SEC . 2]

THE GAZETTE OF INDIA, OCTOBER 2, 2004 ( ASVINA 10, 1926)

Int . Cl '

B65D 1/12

194195 143 D6

Ind. Cl

A LOAD- BEARING SEPARATOR

Title

Applicant : H.A SHETH, OF 32, CIRCUIT HOUSE AREA ( OLD) JAMSHEDPUR- 831001 , INDIA

H.A. SHETH

Inventor :

1529 /CAL/ 1997 FILED ON 20,8.1997

Application no

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003) PATENT OFFICE KOLKATA.

3CLAIMS.

Aload-bearing separator for steel flats packing suitable for use in storage , handling and transhipment ofsteel flats comprising a top and one end open box ( 3 ) containing plurality of bamboo (2) pieces cut to uniform length and placed eye vertical in a single row, a said box containing bamboo pieces compact fitted inside hessianclothbag.

Optionally pulling out the box (3) and enveloping said hessian cloth bag ( 1 ) with the eye vertical bamboo pieces in a cior mat (4) with all sides of said coir mat brought closer and stiched firmly with twine with top surfaces of said coir aties identified with a coloured strip longitudinally woven in the coir mat.

CompleteSpecification :9 pages. Drawing: 1 sheets 7574

[PART III-SEC . 2 THE GAZETTE OF INDIA, OCTOBER 2 , 2004 (ASVINA 10, 1926)

Int. Cl7

F28F 9/013 , 9/16 , B21D 53/08, 39/06 39/08

194196 Ind . Cl

98E

Title

A METHOD OF ASSEMBLING A HEAT EXCHANGER AND A HEAT EXCHANGER APPARATUS THEREOF

Applicant

HANS GUNTNER GMBH OF INDUSTRIESTRASSE 14 D - 82256, FURSTENFELDBRUCK, GERMANY

Inventor :

WILLY LOFFLER

Application no 819/CAL/1998 FILED ON 06.05.1998

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003) PATENT OFFICE KOLKATA.

21CLAIMS.

.A method of assembling a heat exchanger comprising the steps of:

providing a structure comprising spaced apart end walls and a number of substantially parallel fin plates arranged therebetween;

providing a number of heat exchange tubes , each heat exchange tube running between and through the and walls and fin plates , via openings in each of said end walls and said fin plates ; wherein the openings associated with the fin plates are sufficiently tight so as to provide a heat exchange relationship between each fin plate and each heat exchange tube ; and wherein the fin plates support each heat exchange tube;

providing a number of rigid support tubes , each support tube running between and through the end walls and fin plates , via openings in each of said end walls and said fin plates;

wherein the support tubes run substantially parallel with the heat exchange tubes ; wherein the openings associated with the end walls are closely fitting around each support tube ;

wherein each support tube is positioned such as to provide rigidity to the structure;

securing each support tube at the end walls ; and arranging the support tubes running between the heat exchange tubes in order to promote heat exchange to or from the heat exchange tubes .

7575 PART III-SEC. 2]

THE GAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

-22

Drawing: 1sheets

CompleteSpecification : 9 pages .

7576

[PART III-SEC. 2 THE GAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

Int . Cl ' :

D01H 15/46

194197 Ind . Cl

172C1

Title

CAN DELIVERY ATTACHMENT FOR A FINISHER CARD Applicant :

DILIP KUMAR MALLICK OF EC-88 SECTOR 1 , SALT LAKE KOLKATA - 700 064 , WEST BENGAL , INDIA

Inventor :

DILIP KUMAR MALLICK

1957 /CAL/ 1997 FILED ON 20.10.1997

Application no

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003) PATENT OFFICE KOLKATA.

SCLAIMS.

Can Delivery Attachment for a Finisher Card ( A) comprising :

a twin - or four - mouthed conductor ( W) for receiving silver/ fleece from a doffer ( C ) or a drawing roller ( B ) of a finisher card and dividing the fisece Into two or four streams , one set of pressing rollers ( D) , silver diversion guide ( E1 ) and side delivery roller ( X ) of respective side or front delivery rollar and , diversion guide for each stream for passing the fleece therethrough ;

an Intersecting pin drum roller arrangement in a primary drafting zone ( H ) for primary drafting of aliver of fleece racelved from a respective said set and a lattice pin Intersector for final or secondary drafting in a secondary drafting zone ( 1 ) ;

said Intersecting pin drum roller arrangement of sald primary drafting zone ( H ) comprising , a retaining roller ( 104 ) , a drawing roller ( 111 ) , a drafting roller ( 105 ) with pins , two or more gliling rollers ( 106-109 ) with pine In. Intersecting position with the pins of the drafting roller and a delivery roller ( 113 ) so that the silver from the retaining rolier passes through the drafting roller and Intersecting gilling roilers and is drawn out by the drawing rolier to enter the secondary zone through the delivery roller of the primary zone , the tips of the pins of drafting roller ( 105 ) and the tips of opposing pins of the gilling roller going past sach other and maintaining a set gap from the metal surface / outside diameter of the drafting roller and the gilling rollers , for imparting better control of fibres by Intersecting means ;

said lattice pin intersector of said secondary drafting zone (1 ) comprising pinned laths ( 123 ) fixed on two moving chain belts ( 115, 116 ) facing each other and rotating in opposite directions , esch said pinned lath having gill pins ( 124) fixed thereon at a desired angle in a suitable pattern to Intersect between the two chain beits ; and PART III-Sac. 2]

7577 THEGAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

Drawing :7 sheets

CompleteSpecification : 17 pages.

8-267 01/2004 [PART III-SEC. 2 7578

THEGAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

Int . Cl '

194198

C21D , 9/67 , 9/675

12A, B, D 85 B

Ind . Cl

Title

HEAT TREATMENT APPARATUB FOR HEAT TREATING METALS

Applicant : DOWA MINING CO.LTD OF NO . 8-2 MARUNOUCHI 1 - CHOME , CHIYODA- KU , TOKYO, JAPAN

1. YOSHIYUKI TΑΝΝΟ

Inventor :

2. HIROSHI SHIMURA

3. SIGEMI YAMAGUCHI

2214/CAL/ 1996 FILED ON 20.12.1996.

Application no

(CONVENTION NO. 352,343 /95 FILED ON 28.12.1995 IN JAPAN)

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENTRULES 2003) PATENT OFFICE KOLKATA,

SCLAIMS.

In a heat treatment apparatus for heat treating metals having a heat treatment furnace into which a hydrocarbon gas and an oxidization gas are introduced, wherein the improvement comprises a ball valve ( 38 ) having an outlet opening and an inlet opening through which a pusher ( 27 ) for pushing a work to be heat treated in said heat treatment furnace is movable , said outlet opening of the ball valve ( 30 ) being hermetically connected to a pusher inserting port ( 29 ) ferned on a wall ( 20 ) of said treatment furnace , and a seal box ( 31 ) hermetically connected to said inlet opening of the valve (38 ) , asid pusher ( 27) being movable hermetically through said seal box ( 31 ) .

Drawing 18 sheets

CompleteSpecification :11 pages.

7579 PART III-Sac. 2]

THE GAZETTE OF INDIA, OCTOBER 2, 2004 ( ASVINA 10, 1926)

H01F 27/24

194199

Int . CI'

ind. Cl

63D,65 B2

Title

AMAGNETIC ASSEMBLY FOR A TRANSFORMER OR

OTHER ELECTRICAL APPARATUS

Applicant

SIEMENS ENERGY & AUTOMATION INC, OF 3333 OLD MALTON PARKWAY, ALPHARETTA GA, 30202, USA

Inventor

TERRY LYNN MARQUARDT

Applicationno 603/CAL/ 1998 FILED ON 07..04.1998 08 / 838,905 FILED ON 11.4.1997 IN USA)

(CONVENTION NO.

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES

2003) PATENT OFFICE KOLKATA.

11 CLAIMS

Amagneticassembly, comprising:

afirst series of substantially identical laminations , each made up of a thin sheet offerrous material , and abutted against one another in aligned relation;

the laminations of said first series including a first open area flanked by speced, opposed, first surfaces;

first stake locks holding said first series in assembled relation;

asecond series of substantially identical laminatione, each made up of a thin sheet offerrous material and abutted against one another in aligned relation;

second stake locks holding said second series in assembled releti

the laminations of said second series being configured to be assembledto the laminatione of said first series and define therewith a closed loop of said ferrous material;

oppositelydirected the laminations of said second series having second surfaces configured tobe complementary to a corresponding one of said first surfaces and abutting the same;

the dietance between one of said firat and second surfaces, before assembly of sald first series and said second series, being slightly less than the distance between the other of said first and second surfapes se that, upon assembly of sald first series to one another and said second series, an Interference fit sodats between said first and second series it said first and second surfaces to hold said first and second series in assembled relation ; and

an electrical winding disposed about at least one of said first and second series and at least partially cccupying said open area .

Drawing:2 sheets

18 pages.

CompleteSpecification :

7580

THE GAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

[PART III-SBC. 2 Int . Cl '

G06F 9/40G06F 9/46

194200 Ind. Cl

Title

AMETHOD OF IMPLEMENTING AN EXECUTION STACK IN A COMPUTER SYSTEM AND A COMPUTER SYSTEM

Applicant :

SUN MICROSYSTEMS, INC OF 901 , SAN ANTONIO ROAD PALI ALTO , CALIFORNIA 94303 , USA

Inventor

1. LARS BAK

ROBET GREISEMER

3. URS HOLZLE

1762/ CAL./ 1998 FILED ON 05.10.1998

Application no

( CONVENTION NO.08/944335 FILED ON 6.10.1997 IN USA

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003) PATENT OFFICE KOLKATA.

49CLAIMS.

In a computer system , a method for implementing an execution stack that stores frames for functions written in a plurality of programming languages, the method comprising:

storing a first frame on the execution stack for a first, function, the first function being writtenin a first programming language ; and

in response to the first function calling a second function written in a second programming language, storing a data block on the execution stack before a second frame for the second function , the data block having at least one pointer to a previous frame on the execution stack for a previous function written in the second programming language.

7581 THEGAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

PART III-SEC. 2]

FIG.1

FIXED DISK

MEMORY

PROCESSOR

REMOVABLE DISK

SOUND CARD

DISPLAY ADAPTER

SPEAKERS

MOUSE

KEYBOARD

NETWORK INTERFACE

DISPLAY

FIG.2

CompleteSpecification : 32 pages. Drawing :16 sheets 7582

THE GAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

[PART III SBC . 2 Int . Cl '

B60H; 1/24 ; 1/26

Ind. Cl

196B

Title

IMPROVEMENTS IN THE DESIGN AND CONSTRUCTION OF PASSENGER ROAD & RAIL VEHICLES FOR REDUCING INTERIOR HEAT AND ENHANCING VENTILATION .

Applicant

PRABIR SEN , OF 80/2 KANKULIA ROAD , CALCUTTA - 700 029 , WEST BENGAL INDIA

Inventor

PRABIR SEN

Application no

: 1124/CAL/ 1998 FILED ON 26.06.1998 APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003) PATENT OFFICE KOLKATA .

11 CLAIMS.

1 A level design and construction of roof and/ or windows of non -air- conditioned passenger road vehicles and rail coaches for substantially improved natural and/or additionally forced ventilations in a uniform manner as well as reduced solar heat in the interiors , comprising of a top/upper roof and a bottom/lower roof below the said upper roof providing a gap ( optionally tapering down from front to back in case of road vehicles) in between for covering the lower roof from direct sunlight and heat with the air gap as insulation, the said gap being open in the front of the vehicles/coach and closed on the other three sides , the said lower roof having louvre openings along the length of the vehicle/coach for entry of fresh air due to vehicle/coach movement from the large front opening between the roofs , through the several louvre openings in the lower roof into the interior of the vehicle/coach (the gap between the double roof tapering down from front to ear in case of road vehicles for compressing the incoming air naturally ) for more uniform ventilation , and exiting through the open rear window(s) of the vehicle/coach for easier through - flow of air and less drag on vehicle movement , the optional provision of fans near the said front opening for additional ventilation during slow movement/ stoppage of the vehicle/coach ; the said rear and the side windows being fitted with adjustable Venetian type blinds/shutters of opaque type for reducing direct sunlight and yet allowing more air to enter the interior than in case of conventional and semi- open type glass panelled windows .

7583 PART III-SEC . 2]

THE GAZETTE OF INDIA, OCTOBER 2, 2004 ( ASVINA 10, 1926)

Drawing: 2sheets

CompleteSpecification: 10 pages.

7584

[PART III-SBC. 2 THE GAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

Int . Cl ' :

H01 J - 29/ 87 H01J - 9/50

194D

Ind . Cl :

Title

DISASSEMBLING METHOD OF ELECTRONIC APPLIANCE AND AN APPARATUS THEREOF

Applicant :

MATSUSHITA ELECTRIC INDUSTRIAL CO . LTD OF 1006, OAZA KADOMA, KADOMA- SHI , OSAKA 571 , JAPAN Inventor :

1. MIKIO YOTSUMOTO

2. TAKAYUKI GYOBU

3. KAZUMI TAKAMORI

4. YUTAKA MATSUDA

5. KAORU SHIMIZU

1307/ CAL/ 1997 FILED ON 10.7.1997

Application no

( CONVENTION NO( S) . 8-199932 ; 8-199933 AND 8-236337 FILED ON 30.07.1996 . 30.07.1996 AND ON 06.09.1996 IN JAPAN. )

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENT RULES 2003) PATENT OFFICE KOLKATA.

85 CLAIMS.

A disassembling method of an electronic appliance having a housing (50) and plural electronic components installed in said housing (50 ) , comprising the steps of:

conveyuing said electronic appliance having said housing (50) and said plural electronic components installed in said housing (50 ) by a first conveyor ( 1 ) ;

separating said electronic appliance conveyed by said conveyor ( 1 ) into said housing ( 50) , a cathode- ray tube (51 ) of said plural electronic components , and other electronic components, at least on one of said conveyor ( 1 ) and a work bench (40) installed near said conveyor ( 1 ) , and

conveying at least one of said separated housing (50) and said plural electronic components by a second conveyor ( 1 ).

7585 PART III SEC . 2]

THE GAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

CRTcleaningdevice

200

Metalbandremovingdevice

CRTtransferdevice

Bottonplatecuttingdevice

Discardedcabinetcarryingconveyo

Backcoverremovingprocessequipacat

Television

Discardedtelevisionloodingdevice

CompleteSpecification : 71 pages. Drawing:31 sheets

9-267 G1/ 2004 7586

THEGAZETTEOF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926).

[PART I-Вас. 2 Int . Cl'

E02B 9/00 F03B 15/00

Ind. Cl

190C

Title

RENEWABLE RESOURCE POWER GENERATION PLANT AND METHOD OF GENERATING POWER.

Applicant

SHARAV SLUICES , LTD OFISRAEL INSTITUTE OF TECHNOLOGY, TECHNICAL CITY, HAIFA 32000, ISREAL .

Inventor :

1. DAN ZASLAVSKY .

2. RAMI GUETTA

3. RONI HITRON

4. GRIGORY KRIVCHENKO

5. MICHAEL FORBH

Application no 118/cal/1997 FILED ON 12.06.1997 (CONVENTION NO 60/020,278 FILED ON 14.6.1996 IN USA)

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDING (RULE 4, PATENTRULES 2003) PATENT OFFICE KOLKATA.

A renewable resource power generation plan, coniprising:

a generally vertically extending dust having an inlet, an outlet at an elevation lower than said inlet, a side wall of a predetermined diameter and an inner surface of said side wall being substantially smooth in order to propel water droplets away from said sidewall ;

a spray system mounted adjacent said inlet for spraying a predetermined amount of water in droplet form into the air, thereby forming a mixture of air and water droplets which defines a fluid, wherein said duct and said spray system are structured to cooperate such that a spray of a predetermined amount of water greater than a calculable maximum amount of water that would theoretically evaporate in the air throughout substantially the entire height of said duct saturates the air with vapour at the lowest point in the duct, and whereby evaporation of said droplets causes said air to become cooler and denser than air outside said duct, creating an aero - cooling effect and causing a downdraft of said fluid within said duct , and a power system adjacent said outlet for recovering energy tom said downdraft of fluid.

104

-140

102

104a

08-

194 190

FIG. 3

Drawing:33 sheets

CompleteSpecification : 96 pages.

75870 THE GAZETTE OF INDIA, OCTOBER 2, 2004( ABVM10

PART III-Sac.2]

ND. CL.

: 170 B + D

194204 INT. CL.

C11 D 3 /12,3 /02 , 9/16 , 17/00, 13/00

TITLE

AN IMPROVED PROCESS FOR PREPARING DETERGENT BAR COMPOSITION .

APPLICANT

: HINDUSTAN LEVER LIMITED, HINDUSTAN LEVER HOUSE , 165/166 BACKBAY RECLAMATION . MUMBAI - 400 020, MAHARASHTRA , INDIA , AN INDIAN COMPANY .

INVENTORS

1. MHASKAR YESHWANT SUDHAKAR 2. СНОКАРPA KALYANASUNDARAM DHANRAJ

1095 MUM 2000 DATED 05.12.2000

INTERNATIONAL APPLICATION NO INDIAN

APPLICATION NO. Complete after provisional specification filod on 04.12.2001

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RM4, PATENTS RULES, 2003) , PATENT OFFICE BRANCH , MUMMAF - 13.

15 CLAIMS

An improved process for preparing detergent bar composition comprising the steps of:

a. reacting at a temperature between 25 °C to 95 °C one or more precursors of detergent active with alkaline material having an elemental ratio of boron to aluminium (B:Al) in the range 1 :0 to 1:21 , wherein the boron containing alkaline material is sodium meta- borate with solids content 20-60 % and the aluminum containing alkaline material is sodium aluminate with a solid content of 20 to $526 wherein the Al203 to Na2O is in a ratio of 0.5 to 1.55 by weight to obtain a mixture of borate . and/or borate -alumina and detergent active;

b. adding water to the mixture thus obtained from step (a ) ;

с. adding if desired , one or more optional ingredients selected from Panther detergent actives , builders and minor additivos to the mixture of step (w ) and/or step (b ) ;

d. converting the product into bars by conventional method , the ingredients used in the process being incorporated in the process in such amounts as to provide a bar composition comprising:

from 5 to 70 % by weight of detergent active ,

from 0.5 to 30% by weight of borate and/ or borate aluminan

from 5 to 55%by weight ofwatery 0-30% of detergent builder and

optionally other benefit agents.

Drag.: Nit

Prov. Spoon : 22 Pages AGES

Drawings : Nil

Comp.specn .: 26 pages

ty 7588

[PART III-SEC. 2 THE GAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

IND . CL . :

83 A (2)

194205 INT. CL .

A 23 D 7/0

TITLE

IMPROVED FAT SPREAD COMPOSITION

APPLICANT

HINDUSTAN LEVER LIMITED , HINDUSTAN LEVER HOUSE, 165/166, BACKBAY RECLAMATION , MUMBAI 400 020 , MAHARASHTRA , INDIA AN INDIAN COMPANY

INVENTORS

1. SAWANT VINAYAK ASHOK

2. SRINIVASAN MEERA

3. CHANDRASEKARAN KRISHNAN

4. ANAND ASHISH

5. VELAYUTHAM MUTHU

INTERNATIONAL : APPLICATION NO .

INDIAN

1174/MUM/2000 DATED 29/12/2000

: APPLICATION NO .

COMPLETE SPECIFICATION FILED AFTER PROVISIONAL SPECIFICATION

DATED : 26/12/2001

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4, PATENTS RULES 1972 ) , PATENT OFFICE BRANCH , MUMBAI -13 .

10 CLAIMS

1) A process for the manufacture of the synergistic fat spread composition comprising: blending

a) interesterified fat and/or atleast partially hydrogenated fat in an amount of 40- 50% by wt .; and

b) non - fatty substances having negative heat of solution in the range of- 105.8 to 152 KJ /Kg in an amount of 50-60% by wt . Of the total composition, with or without others additives and obtaining therefrom the fat spread.

Provisional Specification : 08 Pages

Drawings : Nil Sheets Complete Specification : 10 Pages

Drawings : Nil Sheets PART III-SEC . 2]

THE GAZETTE OF INDIA, OCTOBER 2, 2004 ( ASVINA 10, 1926)

170D

IND . CL.

194206 C 07 D 2/3

INT. CL .

: FABRIC CARE COMPOSITION

TITLE

APPLICANT

HINDUSTAN LEVER LIMITED , HINDUSTAN LEVER HOUSE, 165/166 BACKBAY RECLAMATION , MUMBAI 400020, MAHARASHTRA, INDIA , AN INDIAN COMPANY.

INVENTORS

1. CARSWELL , ROBERT JOHN

2. JARVIS , ANTHONY NICHOLAS

3. KILLEY , ADELLE LOUISE

4. MOONEY , WILLIAMS

5. PARKER, ANDREW PHILIP

6. PECKHAM, EMILY JANE

7. SHEN , ZHENGWU

INTERNATIONAL APPLICATION NO :

651 BOM 1999 DATED 15.09.1999

INDIAN

APPLICATION NO .

9820206.2 & 9911474.4 DATED 16.09.1998 & 17,05.1999 OF PRIORITY NOS .

U.K.

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4, PATENTS RULES, 2003) , PATENT OFFICE BRANCH, MUMBAI - 13 .

07. CLAIMS

Fabric care composition comprising an amine or amide-epichlorohydrin resin or derivative thereof, a silicone component wherein the ratio of the resin to silicone component is from 5 : 1 to 15 : 1 , and, optionally, a textile compatible carrier , wherein the textile compatible carrier facilitates contact between the resin and a fabric , the composition being adapted for use in the rinse cycle of a laundering process .

Drawings: Nil

Comp.specn. 27 pages 7590

[PART I-SEC . 2 THE GAZETTE OF INDIA , OCTOBER 2, 2004 ( ASVINA 10, 1926)

IND . CL .

99 E

194207

INT. CL .

: A 45 D 40/04

TITLE

: DISPENSING CONTANER FOR A COSMETIC STICK

APPLICANT

HINDUSTAN LEVER LIMITED

HINDUSTAN LEVER HOUSE,

165/166, BACKBAY RECLAMATION , MUMBAI -- 400 020, MAHARASHTRA , INDIA

AN INDIAN COMPANY

INVENTOR

: - IDEM -

APPLICATION NO

INTERNATIONAL INDIAN :

: 566 BOM 1999 DATED 12/08/1999

APPLICATION NO .

PRIORITY NO .

: 9817813.0 DATED 14/08/1998 OF UNITED KINGDOM

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4 , PATENTS RULES 2003) , PATENT OFFICE BRANCH , MUMBAI - 13 .

09 CLAIMS

Adispensing container for a cosmetic stick produets comprising a barrel (2) having an open end (3 ) and a closed end, a central longitudinal axis ( 5) which runs between the open end (3) and the closed end of the barrel (2) , a piston (7) slidably located within the barrel (2) for advancing product contained within the barrel (2) towards the open end (3 ), the container having a cross- section perpendicular to the central longitudinal axis (5) which is ellipsoidal, the open end (3 ) of the container ending in an opening through which product contained in the dispenser can be dispensed, characterised in that the opening when viewed in the direction of the minor axes of the ellipsoidal cross - section, is concave.

Fig.1.

201 COMPLETE SPECIFICATION :

13 PAGES DRAWINGS : 01 SHEETS

12-

126 PART III-SBC. 2]

THE GAZETTE OF INDIA, OCTOBER 2 , 3084 (ABVINA 10, 1926)

IND . CL .

170D

194206 INT . CL .

: C11 D 1/00, 1/07 :

TITLE

:

DETERGENT TABLET

APPLICANT

: HINDUSTAN LEVER LIMITED, HINDUSTAN LEVER HOUSE , 164466 BACHDAY RECLAMATION , MUMBAI - 400 010, MAHARASHTRA, INDIA .

INVENTOR

1 ) LAMMERS Rene

2) LIEM, Seeng Djiang

3 ) SANDERSON Alastair Richard

4) SLENDERBROEK Bart

5) TAMMES Harmennus

6) VERMAAS Arie

7) VERSCHELLING , Gilbert Martin

8) WESTERHOUT Ronaldus Wilhelmans Jóhannes INTERNATIONAL :

APPLICATION NO

INDIAN

: 849/BOM/1999 DATED 25.11.1999

APPLICATION NO .

9826097.9 dated 27.11.1996 of United Kingdom .

PRIORITY NO. :

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4, PATENTS RULES 2003) , PATENT OFFICE BRANCH, MUMBAI - 13

17 CLAIMS

Adetergent tablet of compressed particulate composition , wherein the tablet or a region thereof comprises organic detergent and detergency builder, characterised in that the tablet or region thereof is compacted from a composition which contains :

(A)

particles containing at least 60% by weight of non- soap anionic detergent (B)

particles containing at least 80% of their own weight of one or more water soluble materials selected from .

Materials with a water solubility exceeding 50 grams per 100 grams water at 20°C ;

⚫ and sodium tripolyphosphate containing at least 50% of its own weight of the phase I anhydrous form .

Drawings - nil- sheet .

Comp.specn .: 47 pages 7592

THE GAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

[PART III--SBC. 2 IND . CL .

: 170 D

194209

INT . CL .

: C 11 D17/00

TITLE

: CLEANSING SYSTEM FOR WASHING FABRIC .

APPLICANT

: HINDUSTAN LEVER LIMITED, HINDUSTAN LEVER HOUSE, 165/166 BACKBAY RECLAMATION , MUMBAI – 400 020 MAHARASHTRA , INDIA . AN INDIAN COMPANY :

INVENTOR

1 ) FAKHRUDDIN ESMAI PACHA

2) RUTHERFORD KEITH LESLIE

PCT /EP00/09941 DATED 09.10.2000

INTERNATIONAL : APPLICATION NO

INDIAN

: IN / PCT/ 2002 / 00351 / MUM DATED 22.03.2002

APPLICATION NO .

PRIORITY NO .

99308222.1 DATED 18/10/1999 OF EUROPE

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4 , PATENTS RULES 2003 ) , PATENT OFFICE BRANCH, MUMBAI -13 .

05 CLAIMS

Cleansing system for washing fabric comprising a fabric washing bar and a light weight polymeric mesh sponge which can be gripped in hand, said sponge being adapted to hold the bar within a cavity provided in the sponge so that in use the bar is enclosed in the sponge and in fluid/ lather communication with the outside of the sponge which comes into contact with fabric duringwashing.

Fig.3.

COMPLETE SPECIFICATION : 23 PAGES DRAWINGS : 1 SHEET 7593 PART -Sac. 2]

THE GAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

194210 170D

IND. CL.

A 61 K 7/48

INT. CL.

: ANTI - IRRITANTS IN COSMETIC COMPOSITIONS .

TITLE

APPLICANT

HINDUSTAN LEVER LIMITED , HINDUSTAN LEVER HOUSE , 165/166 BACKBAY RECLAMATION , MUMBΑΙ 400 020 MAHARASHTRA, INDIA . AN INDIAN COMPANY.

INVENTORS

(1) RONNI LYNN WEINKAUF

(2) UMA SANTHANAM

(3) LAURA ROSE PALANKER

(4) DONALD RICK

(5) JOHN BRIAN BARTOLONE

: PCT/EP 99/00764 DATED 04.02.1999

INTERNATIONAL APPLICATION NO

IN/PCT/2000/ 00327/MUM DATED 24.08.2000

INDIAN

APPLICATION NO.

: 09/030964 DATED 26/02/1998 OF U.S.A.

PRIORITY NO.

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4, PATENTS RULES 2003), PATENT OFFICE BRANCH , MUMBAI - 13.

MCLAIMS

Acosmetic skin are composition comprising:

(1) a cosmetic benefit ingredient selected from the group consisting of retinal , retinoic acid, retinal , C2 -Cs retinyl ester, hydroxy acid and mixtures thereof; wherein said hydroxy acid is present in an amount of from 0.01% to 20% by weight of the composition, having the general structure (1 )

..(1 )

MCH( OH )COOH .

Where Mis Hor a saturated or unsaturated, straight or branched hydrocarbon chain containing from 1 to 27 carbon atoms ;

(ii) gluconolactone and/ or glucarolactone in an amount of from about 3 % to about 12% by weight of the composition; and

iii) a cosmetically acceptable vehicle.

(

Drawings: Nil

Comp.specn.35 pages

10-267 G1/2004 7594

[PART III-SBC . 2 THE GAZETTE OF INDIA , OCTOBER 2, 2004 (ASVINA 10, 1926)

194211 : 55D

IND . CL .

INT . CL .

: A 01 N 55/00

TITLE

: A PROCESS FOR PREPARING SYNERGISTIC INSECTICIDAL COMPOSITION CONTAINING CHLORONICOTYNYLE AND ORGANOPHOSPHORUS COMPOUNDS .

APPLICANT

: UNITED PHOSPHORUS LIMITED . ,

3-11 GIDC , VAPI -396 195 ,

STATE OF GUJARAT,

INDIA , AN INDIAN COMPANY.

1. PRAKASH MAHADEV JADHAV

INVENTOR

2. JAIDEV RAJANIKANT SHORFF

INTERNATIONAL : APPLICATION NO

: 558 /MUM/ 2002 DATED 26.06.2002

INDIAN APPLICATION NO .

COMPLETE AFTER PROVISIONAL SPECIFICATION FILED ON 22/09/2003 APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4 , PATENTS RULES , 2003 ), PATENT OFFICE , MUMBAI - 13.

24 CLAIMS

Aprocess for preparing synergistic insecticidal composition which comprises mixing thoroughly , one or more choronicotynyle compound , in an amount ranging from 0.1 to 5% by weight of the composition , one or more compounds selected from the group of organophosphorus compounds , except Azinphos - methyl , profenofos and Methamidophos , in an amount ranging from 30 to 75% by weight of the composition and 20 to 69.9% by weight of conventional agriculturally acceptable carrier( s) and excipient ( s)

06 PAGES

PROVISIONAL SPECIFICATION :

DRAWINGS: NIL COMPLETE SPECIFICATION :

37 PAGES

DRAWINGS: NIL 7595 THE GAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

PART III-SBC. 2 ]

194212

: 55D

IND . CL .

: A 01 N 53/00

INT. CL.

TITLE

: A PROCESS FOR PREPARING SYNERGISTIC INSECTICIDAL COMPOSITION CONTAINING CHLORONICOTYNYLE AND PYRETHROIDS COMPOUNDS .

: UNITED PHOSPHORUS LIMITED. ,

APPLICANT

3-11 GIDC , VAPI -396 195 ,

STATE OF GUJARAT,

INDIA, AN INDIAN COMPANY .

1. PRAKASH MAHADEV JADHAV

INVENTOR

2. JAIDEV RAJANIKANT SHORFF

: INTERNATIONAL APPLICATION NO

557/MUM/2002 DATED 26.06.2002

INDIAN APPLICATION NO .

COMPLETE AFTER PROVISIONAL SPECIFICATION FILED ON 25/09/2003 APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4, PATENTS RULES , 2003) , PATENT OFFICE, MUMBAI - 13.

33 CLAIMS

A process for preparing synergistic insecticidal composition containing chloronicotynyle and pyrethroids compounds, which comprises mixing thoroughly, one or more chloronicotynyle compound, in an amount ranging from 0.1 to 5% by weight of the composition, one or more compounds selected from the group of pyrethroids compounds , in an amount ranging from 1.0 to 60% by weight of the composition and 35 to 98.90% by weight of conventional agriculturally acceptable carrier(s) and excipient (s)

DRAWINGS : NIL

05 PAGES

PROVISIONAL SPECIFICATION :

DRAWINGS : NIL

36PAGES

COMPLETE SPECIFICATION :

7596

[PART -SEC. 2 THE GAZETTE OF INDIA, OCTOBER 2, 2004 ( ASVINA 10, 1936)

IND . CL . : 85 G

194213

INT . CL .

C 21 B 7/10

TITLE

: METHOD FOR THE MANUFACTURE OF A COMPOSITE COOLING ELEMENT FOR THE MELT ZONE OF A METALLURGICAL REACTOR AND A COMPOSITE COOLING ELEMENT MANUFACTURED BY SAID METHOD .

APPLICANT

: OUTOKUMPU OYJ OF RIIHITONTUNTIE 7 , FIN 02200 ESPOO , FINLAND , A FINNISH PUBLIC LIMITED COMPANY.

INVENTORS

1 . KOJO , IIKΚΑ

2 .

SAARINEN , RISTO

3. JOKILAAKSO , ARI

PCT/F100/000431 DATED12.05.2000

INTERNATIONAL APPLICATION NO

IN/PCT/2001/01420/MUM DATED 15.11.2001

INDIAN APPLICATION NO .

PRIORITY NO .

: 991191 DATED 26.05.1999 OF FINLAND.

1 APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4, PATENTS RULES , 2003 ) , PATENT OFFICE BRANCH, MUMBAI - 13 .

22 CLAIMS

Amethod for manufacturing a composite cooling element for the molt zone of a metallurgical reactor , characterized is manufactured by attaching ceramic lining sections of the element to each other by copper casting and forming at the same time a copper plate equipped with cooling water channels behind the lining, the ceramic lining sections of the cooling element are placed in a framework made of steel, after which the framework and the ceramic lining sections are joined to each other using copper casting . whereby the framework forms the joint of the element surface and copper forms the inner joints and the copper plate behind the lining.

Comp.specn. 12 pages

Drawings: 03 sheets

2 7597 THE GAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

PART I-SBC. 2]

: 167 C

IND. CL.

194214 : С 22 В 15/00 , С 22 В 23/00

INT. CL.

TITLE

METHOD FOR REDUCING NON - FERROUS METAL CONTENT IN SLAG IN THE PRODUCTION OF NON- FERROUS METALS OCCURRING IN SUSPENSION SMELTING FURNACE OUTOKUMPU OYJ ,

APPLICANT

OF RIIHITONTUNTIE 7, FIN - 02200 ESPOO , FINLAND, A FINNISH COMPANY.

1) HANNIALA , PEKKA

INVENTOR

2) KOJO , ILKKA

3) SAARINEN , RISTO

: PCT /F100/00406

INTERNATIONAL APPLICATION NO

DATED 07.11.2001

IN/PCT/2001 /01379 /MUM

INDIAN APPLICATION NO .

: 991109 DATED 14/05/1999 OF FINLAND

PRIORITY NO.

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE & PATENTS RULES, 2003), PATENT OFFICE BRANCH, MUMBAI - 13.

07CLAIMS

Amethod for reducing non- fomos motul content of a slag generated in the production of a non-ferrous metal in a suspension smditing Funnce owuqining feeding metallurgical coke into the fumace in addition to concentrate, oxygensous gas and flux in ondor to reduce the slag, the cobe charged to the furonoe being metallurgical coke, which has a grain size in the region of 1-25 mm, and placing beflies into the furnace from the roof down to prevent drifting ofsmall particles containing non- fonous metal to the back of the furnace and out of the furnace with the slag.

Fig. 1

DRAWINGS: 2 SHEETS

10 PAGES

COMPLETE SPECIFICATION :

7598

[PART III-SBC . 2 THE GAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10 , 1926)

32F 2 d

Ind. Cl . L. :

194215

C07 D 487/04

INT. CL .

TITLE

A NOVEL PROCESS FOR THE SYNTHESIS OF SILDENAFIL CITRATE

APPLICANT

CIPLA LTD. ,

289 , BELLASIS ROAD MUMBAI CENTRAL, MUMBAI - 400008 , MAHARASHTRA , INDIA .

AN INDIAN COMPANY

1. RAJENDRA NARAYANRAO KANKAN .

INVENTORS :

2. DHARAMRAJ RAMCHANDRA RAO .

INTERNATIONAL : APPLICATION NO .

INDIAN

953/ MUM/ 2001 DATED 01/10/2001

APPLICATION NO .

DIVISIONAL TO 638 / BOM/ 1999 DATED 10/09/1999

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4 , PATENTS RULES 1972 ) , PATENT OFFICE BRANCH , MUMBAI - 13 .

04 CLAIMS

Aprocess for preparation of sildenafil citrate wherein the compound of the formula :

OCHS HN

NRI

where R₁ Is methyl when R2 is H

Isconverted to the compound of the formula:

OCIIS HN

SON

NCH

by subjecting to methylation using a methylating agent .

Complete Specification : 17 Pages

Drawings : Nil Sheets 7599 THE GAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

PART III-Sac. 2]

194216- 32F

IND . CL.

C 07 D- 401 / 12

INT. CL .

TITLE

PROCESS FOR PREPARATION OF AN OPTICALLY ACTIVE SUBSTITUTED PYRIDINYLMETHYL - SULPHINYL BENZIMIDAZOLE .

APPLICANT

SUN PHARMACEUTICALINDUSTRIES LTD. , ACME PLAZA ANDHERI - KURLA ROAD , ANDHERI ( EAST), MUMBAI 400 059, MAHARASHTRA , INDIA . AN INDIAN COMPANY .

1 ) PATEL VIJAY MULJIBHAI

INVENTORS

2) SONI ROHIT RAVIKANT

3 ) REHANI RAJEEV BUDHDEV

4) THENNATI RAJAMANNAR

---------- DATED ....

INTERNATIONAL APPLICATION NO :

299 MUM 2002 DATED 27.03.2002

INDIAN

Post dated to : 22.04.2002 U/s . 17( 1 ) of the Patents act, 1970.

APPLICATION NO ,

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES 1972) , PATENT OFFICE BRANCH, MUMBAI - 13.

23 CLAIMS

1. A process for the preparation of an optically active enantiomer or an enantiomerically enriched form of substituted pyridinylmethyl -sulphinyl- benzimidazole, compound of formula 1 wherein R₁ to R4 are selected from H, linear or branched ( 1-4C) alkyl , linear or branched ( 1-4 C) alkoxy, aryl , aryloxy and their halo or alkoxy substituted analogs , said process comprising enantioselective catalytic oxidation of a substituted pyridinylmethyl prochiral sulphide derivative of benzimidazole , compound of formuln 2 wherein R₁ to Ra are as defined above , with an oxidizing agent in an organic soivent in the presence of a base and a catalyst comprising titanlum or vanadium complexed with a chiral monodentate ligand .

R3 .

R1 N

R1 R4

Formula 2

Formula 1 7600

[PART I-Sac. 2 THE GAZETTE OF INDIA, OCTOBER 2, 2004 ( ASVINA 10, 1926)

IND . CL . :

194217

INT . CL .

: H 04 M 9/08

TITLE

AN ECHO SUPPRESSION DEVICE

APPLICANT

: ERICSSON INC

7001 DEVELOPMENT DRIVE ,

RESEARCH TRIANGLE PARK , NORTH CAROLINA , 27709 ,

UNITED STATES OF AMERICA

INVENTOR

1 ) ERIC DOUGLAS ROMESBURG

: PCT/US98 / 26231 DATED 22/12/1998

INTERNATIONAL APPLICATION NO .

IN / PCT / 2000/ 00144 / MUM DATED 03/07/2000

INDIAN APPLICATION NO .

09/ 005,144 DATED 09/01/1998 OF U. S. A.

PRIORITY NO . :

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES 2003 ) , PATENT OFFICE BRANCII , MUMBAI - 13 .

20 CLAIMS

1 ) An echo suppression device , comprising:

an echo suppressor configured to attenuate a first communications signal in order to suppress an echo component thereof, said echo component resulting from a reflection of a second communications signal ;

a speaker producing audio output based on said second communications signal ; and a voice activity detector coupled to said echo suppressor and configured to provide an indication of whether said second communications signal includes a speech component .

Wherein said echo suppressor is deactivated when said voice activity detector indicates that said second communications signal does not include a speech component

FIG. 2

57 PAGES

COMPLETE SPECIFICATION :

DRAWINGS : 03 SHEETS

遊

FIG. 3

124 7601 THE GAZETTE OF INDIA, OCTOBER 2, 2004 ( ASVINA 10, 1926)

PART III-SEC. 2]

: 55 E 4

IND. CL.

194218

INT . CL .

A 61 K 9/22 , A 61 P 3/10, C 07 C 311/54

TITLE

A PROCESS FOR PREPARATION OF CONTROLLED RELEASE ANTIDIBETIC FORMULATION

APPLICANT

IPCA LABORATORIES LIMITED . ,

48 , KANDIVLI INDUSTRIAL ESTATE , MUMBAI - 400 067, MAHARASHTRA , INDIA, AN INDIAN COMPANY.

1. THEMBALATH RAMACHANDRAN

INVENTOR

2. BANSAL YATISH KUMAR

3. TAWDE VAISHALI MANISH

4. JADHAV VIVEK

INTERNATIONAL APPLICATION NO

1155 /MUM/2002 DATED 26/12/2002

INDIAN

APPLICATION NO .

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4 , PATENTS RULES , 2003) , PATENT OFFICE , MUMBAI - 13 .

12 CLAIMS

Aprocess for preparation of controlled release antidiabetic formulation comprising of an active ingredient

characterized in that the said process comprises of the following steps :

(a) dispersing approximately 25.8 % of the active ingredient in about 15 % polymer matrix by blending a therapeutic dose of finely ground drug particles into mixer with combination of two modified release retardant polymers i.e. Hydroxypropyl methyl cellulose 4000 cps and Hydroxypropyl methyl cellulose 15000 cps wherein 40-60% diluents is added to above mixture with mixing;

(b) preparing 2-10% of the binder solution and adding the said solution slowly into drug polymer mixture prepared as in step (a) ;

(c) blending the mixture uniformly till uniform distribution and mixing the polymers in drug to form a mateix with aid of the said binding agent;

11-267 G1 / 2004 7602

THE GAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

[PART III-SEC. 2 (d) allowing the polymer to swell and grow in thickness of drug depleted gel layer and to form the envelope around the drug;

(e) drying the wet granules and rasping through sieve of 20 mesh and loading these granules into planetary mixture;

(f) adding 0.5-1% of lubricants and 0.2-0.4% of glidants to this mixture and mixing for 2 to 5 minutes; and

(g) transferring the lubricated granules to a compression machine and compressing the granules into tablets .

COMPLETE SPECIFICATION : 13PAGES

DRAWINGS : NIL 7603 THEGAZETTE OF INDIA, OCTOBER 2, 2004,(ASVINA, 10, 1926)

PART III-SBC . 2 ]

: 55 E

IND. CL .

194219

INT. CL .

A 61 P 3/10 , A 61 K 9/22 , C 07 C 279/26

TITLE

A PROCESS FOR PREPARING DUAL RELEASE PHARMACEUTICAL TABLET OF THIAZOLIDINEDIONE AND BIGUANIDE

APPLICANT

IPCA LABORATORIES LIMITED . ,

48 , KANDIVLI INDUSTRIAL ESTATE , MUMBAI - 400.067 , MAHARASHTRA, - INDIA, AN INDIAN COMPANY .

1. THEMBALATH RAMACHANDRAN

INVENTOR

2. BANSAL YATISH KUMAR

3. TAWDE VAISHALI MANISH

4. JADHAV VIVEK KAMLAKAR

INTERNATIONAL APPLICATION NO :

152/MUM/ 2003 DATED 05/02/2003

INDIAN APPLICATION NO .

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4, PATENTS RULES , 2003) , PATENT OFFICE , MUMBAI - 13.

33 CLAIMS

Aprocess for preparing dual release pharmaceutical composition in the form oftablets- comprising of the upper layer of the first active substance ranging from 15 to 45 mg and a mixture of excipients which allows immediate release of the said ingredient and the lower layer of second active substance ranging from 500 to 850 mg , which is in contact with upper layer in a mixture of at least one or more biodegradable polymeric matrix where the second active substance is uniformly dispersed and which allows the extended release characterised in that the said process comprises of:

7604

[PART III-SEC . 2 THE GAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

: 55 E

IND . CL .

194220

INT . CL .

A 61 K 9/22 , 31/135 , 45/06

TITLE

A NOVEL PROCESS FOR EXTENDED RELEASE METOPROLOL SUCCINATE PHARMACEUTICAL COMPOSITIONS .

APPLICANT

: IPCA LABORATORIES LIMITED . , 48 , KANDIVLI INDUSTRIAL ESTATE, MUMBAI - 400 067 , MAHARASHTRA , INDIA , AN INDIAN COMPANY .

INVENTOR

1. THEMBALATH RAMACHANDRAN

2. BANSAL YATISH KUMAR

3. SENGUPTA SUBHRANGSHU

4. SINGH NIVEDITA

INTERNATIONAL APPLICATION NO :

INDIAN

: 151/MUM/2003 DATED 05/02/2003

APPLICATION NO .

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES , 2003) , PATENT OFFICE , MUMBAI - 13 .

14 CLAIMS

A process for the manufacture of an extended release preparation containing metoprolol succinate by wet granulation process comprising of active pharmaceutical ingredient, metoprolol succinate 27 to 30 % and pharmaceutical excipients such as microcrystalline cellulose 17 to 30 % , carbomer 1 to 6 % hydroxypropyl methyl cellulose (K100M) 14 to 56 % , hydroxypropyl methyl cellulose (K4M) 4 to 10% , povidone 8 to 12 %, magnesium stearate 1 to 1.5% , isopropyl alcohol ( q.s. ) and the coating solution comprises of opadry 04- C- 7000 A (colorcon) 4 to 5 % , ethyl Cellulose 1 to 2% , isopropyl alcohol ( q.s. ) and methylene chloride( q.s. )

characterized in that the said process comprises 7605 PART III-SEC . 2 ]

THE GAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

a) introduction of metoprolol succinate , carbomer and hydroxy polymethyl cellulose by blending, milling and sieving prior to granulation;

b) introduction of a solution of polymer in non - aqueous/hydroalcoholic solvent during granulation of the blended material as in 1 (a) ;

c) compressing the said granules as in 1 (b) into tablets ;

d) spray coating of the said compressed tablets as in 1 (c) , with a water - insoluble polymeric membrane containing derivatives of cellulose without protylasable groups ; and e) thereby incorporating the tablet and the coating into a matrix forming a swelling gel in contact with water

13 PAGES

NIL

DRAWINGS :

COMPLETE SPECIFICATION :

7606

[PART III-SEC. 2 THE GAZETTE OF INDIA , OCTOBER 2 , 2004 ( ASVINA 10 , 1926 )

32 1

IND . CL .

194221

INT . CL .

C07 D 495/04

TITLE

: A PROCESS FOR THE PREPARATION OF INTERMADIATES USEFUL IN THE PREPARATION OF CLOPIDOGREL .

APPLICANT

: CADILA HEALTH CARE LTD . ,

ZYDUS TOWER ,

SATELLITE CROSS ROADS ,

AHMEDABAD 380 015 ,

GUJARAT, INDIA , AN INDIAN COMPANY .

INVENTOR

1 ) PANDEY , BIPIN

2) LOHRAY , VIDYA BHUSHAN

3) LOHRAY , BRAJ BHUSHAN

INTERNATIONAL : APPLICATION NO

27/MUM / 2003 DATED 08.01.2003

INDIAN APPLICATION NO .

DIVISIONAL TO :

84/MUM/ 2001 DATED 24.01.2001

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES , 2003) , PATENT OFFICE BRANCH , MUMBAI - 13 .

05 CLAIMS

A process for the preparation of a compound of formula ( III) or its salt, an intermediate useful in the preparation of clopidogrel ,

COOL

( 111 ) (± ) or ( + ) or (- )

Wherein X represents bromo , iodo , chloro , or hydrogen atom , Which comprises reacting a compound of forinula IV

CN X

( IV) (土 ) or (+ ) or (- )

or its salts in racemic or in any of its of its optical forms in the presence of acidic or catalyst in a suitable solvent to produce said compound of formula III or its salt with same configuration as the starting compound of formula IV, and if desired , resolving the compound of formula III to its corresponding optically active (+) and (- ) forms .

DRAWINGS : NIL

COMPLETE SPECIFICATION : 37 PAGES 7607 PART III-SEC. 2]

THE GAZETTE OF INDIA, OCTOBER 2 , 2004 ( ABVINA 10, 1926)

194222

: 32 F

IND . CL .

INT . CL .

: C07 D 495/04

TITLE

: A PROCESS FOR THE MANUFACTURE OF THIENO [3,2-c] PYRIDINE DERIVATIVES .

;

APPLICANT

CADILA HEALTH CARE LTD. ,

ZYDUS TOWER ,

SATELLITE CROSS ROADS ,

AHMEDABAD 380 015 ,

GUJARAT , INDIA , AN INDIAN COMPANY .

INVENTOR

1. PANDEY, ΒΙΡΙΝ

2. LOHRAY , VIDYA BHUSHAN

3. LOHRAY, BRAJ BHUSHAN

INTERNATIONAL APPLICATION NO

INDIAN

24/ MUM/ 2003 DATED 08.01.2003

APPLICATION NO .

DIVISIONAL TO

84/ MUM / 2001 DATED 24.01.2001

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4 , PATENTS RULES , 2003 ) , PATENT OFFICE BRANCH, MUMBAI - 13 .

20 CLAIMS

1. A process for the preparation of thicono [ 3,2 - c ) pyridine derivatives ofthe general formula (1 )

(1 ) ( ) or (+ ) or ( -)

5 where X represents either hydrogen , fluoro, chloro , bromo or iodo atom , profornbly 2-chloro , which comprisos:

i) reacting a compound of formula (VI ) wiheroin X is as defined above,

(VI)

NII + MCN

M' ISO (vi)

( ۱۷)( *)

(VII)

(۷)

NIL

DRAWINGS :

39 PAGES

COMPLETE SPECIFICATION :

7608

[PART III-SEC. 2 THE GAZETTE OF INDIA, OCTOBER 2, 2004 ( ASVINA 10, 1926)

with hydrogen sulfite derivative of the general formula (VIII ) where M ' represents an alkali metal such as Na , K and Li and a cyanide of the general formula ( VII ) , where M represents an alkali metal , trimethylsilyl ( TMS) , Cu or hydrogen and subsequently reacting in situ with a compound of general formula (V) or its acid addition salts, to obtain a compound of general formula ( IV ) , where X is as defined carlier ,

ii ) reacting a compound of general formula ( IV) , in (±) form or any of its optically active ( 1 ) or ( - ) 15 forms,

CON12

CN

X

(IV) ( + ) or ( +) or ( - )

(11 ) (+) or (+ ) or ( - )

with acidic or basic reagents to obtain a compound of formula (II ) or its salt with retention of configuration,

20 iii) reacting a compound of general formula ( II ) , in cither (± ) form or its optically active ( +) or (- ) forms,

CONII ,

COOCH,

-x א

( 11 ) (±) or ( + ) or ( - )

(1 ) (±) or (+ ) or (- )

with acidic reagents in presence of methanol to obtain a compound of formula ( 1 ) or its salt , with retention of configuration ,

iv) and finally , resolving (±) the compound of formula ( 1 ) or its salt , into its optical isomers , 7609 PART III-SBC. 2]

THE GAZETTE OF INDIA, OCTOBER 2, 2004 ( ASVINA 10, 1926)

32F

194223

IND . CL.

C07 D 495/04

INT. CL .

TITLE

A PROCESS FOR THE PREPARATION OF THIENO[ 3,2- c ] PYRIDINE DERIVATIVES .

APPLICANT

: CADILA HEALTH CARE LTD. ,

ZYDUS TOWER,

SATELLITE CROSS ROADS,

AHMEDABAD 380 015 , GUJARAT, INDIA, AN INDIAN COMPANY.

1 ) PANDEY, BΙΡΙΝ

INVENTOR

2) LOHRAY, VIDYA BHUSHAN

3) LOHRAY, BRAJ BHUSHAN

INTERNATIONAL APPLICATION NO

23 /MUM/ 2003 DATED 08.01.2003

INDIAN APPLICATION NO .

DIVISIONAL TO

84/MUM /2001 DATED 24.01.2001

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4 , PATENTS RULES, 2003) , PATENT OFFICE BRANCH, MUMBAI - 13.

03 CLAIMS

1. A process for the preparation of thicno[ 3,2- c) pyridine derivatives of the generatorinula ( 1 ) ,

OCI

(1 ) (土) or ( 1 ) or ( - )

in its racemic or optically (+ ) or (- ) forms where X represents either hydrogen , fluoro, chloro , bromo or todo alom, preferably 2-chloro , which comprises:

reacting a compound of formula 111

COOH

(111 ) ( ) or ( +) or ( + )

wherein X is as defined above , with SOCI , /MeOll or cong , 11.80, in the presence of Mell .

COMPLETE SPECIFICATION 37 PAGES

DRAWINGS: NIL

12-267 01/2004 7610

[PART I-Sac. 2 "THE GAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

IND . CL .

: 32F

194224

INT . CL .

: C 07 D 495/04

TITLE

: A PROCESS FOR THE PREPARATION OF COMPOUNDS FOR USE AS INTERMEDIATES IN THE PREPARATION OF THIENO [ 3,2 - c ] PYRIDINE DERIVATIVES .

APPLICANT

: CADILA HEALTH CARE LTD. ,

ZYDUS TOWER ,

SATELLITE CROSS ROADS , AHMEDABAD 380 015, GUJARAT, INDIA, AN INDIAN COMPANY .

INVENTOR

1. PANDEY, BIPΙΝ

2. LOHRAY, VIDYA BHUSHAN

3. LOHRAY, BRAJ BHUSHAN

INTERNATIONAL : APPLICATION NO

26/MUM /2003 DATED 08.01.2003

INDIAN APPLICATION NO . :

DIVISIONAL TO

84/ MUM/ 2001 DATED 24.01.2001

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGSA (RULE 4 , PATENTS RULES , 2003 ) , PATENT OFFICE BRANCH , MUMBAI - 13 .

1. 1 A process for the preparation of a compound of formula ( IV) for use as an intermediate in the preparation of thicono [ 3,2 - c ] pyridine derivatives ( clopidogrel )

C'N

(IV) ( L)

where X represents either hydrogen , fluoro, chloro, bronio or iado atom , preferably 2 - ekdoro , whieli comprises:

(۷۱)

NII

MCN

(۷)

(۷۱۱ )

(VII)

(۱۷)( ۱ )

COMPLETE SPECIFICATION : 38 PAGES

DRAWINGS : NIL

formula (VI) wherein the meaning ofX is halogen atom, with a 10

reacting the halogenobenzaldehyde of general hydrogen sulfite of general formula (VIII) wherein Mis as defined earlier, and with cyanide of general formula (VII ) , wherein M is as defined earlier, and subsequently reacting in situ with the compound of general formula (V) or its acid addition salt; and if desired resolving the compound of formula ( IV) or its salt, so obtainedto its (+) and (- ) form or its salt .

7611 THE GAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10,4926)

ART II-Sac.2)

- 55D2

IND. Custom

A 01 N 25/32

INT. CL.

TITLE

: A PROCESS FOR PREPARING A CHEMICALLY STABLE, SYNERGISTIC HERBICIDAL COMPOSITION, постав :

APPLICANT

nikqube

UNITED PHOSPHORUS LIMITED. , 3-11 GIDC, VAPI - 396 195, ili ali to

de ago tod hasinad วา STATE OF GUJARATI 9

THINDIA, AN INDIAN COMPANY and taga

600ml jo bos Snipes

INVENTOR

давталφά

1. PRAKASH MAHADEV JADHAVэл

fai que

2. JAIDEV RAJANIKANT SHORFFéwill

0001 INTERNATIONAL APPLICATION NO :

INDIAN :

15/MUM/2003 DATED 06.01.2003

APPLICATION NO .

промозов и pe to rolaarty bont sdt gaivsiz COMPLETE AFTER PROVISIONAL SPECIFICATION FILED ON 09/03/2004

OFFICE FOR OPPOSITION PROCEEDINGS APPROPRIATE OFFICE FOR (RULE 4 , PATENTS RULES , 2003), PATENT OFFICE BRANCH, MUMBAI - 13.

13 CLAIMS

Aprocess for preparation of a chemically stable synergistic herbicidid boliposition comprising steps:

a) Preparing a mixture-A in the follow steps:

(1) Pre blending 5-10% Metsulfuron Methyl active content, 20-40% of Sulfosulfuron active content and 0.1-10% of inert filler;

(ii) Milling the pre blend,

(iii ) Post blending the milled mixture to get the Mixture-A;

b) Preparing a Mixture-B in the following steps:

(i) Pre blending 30-60% of sulfosulfuron active content, 0.1-10% stabilizer, 0.01-10% of inert filler, with 0.1-5% wetting and 0.1-1% dispersing agent;

(ii) Milling the pre blend,

(iii) Postblending the milled mixture to get the Mixture-B;

c) Making 10-40% w/ w of the composition, a spray solution by mixing 10-100 parts Polyoxyethylene Sorbitan Fatty Acid Ester along with 1-10 parts defoamer and 50-500 parts water;

Ρ.Τ.Ο.

7612

[PART III-SEC. 2 THE GAZETTE OF INDIA, OCTOBER 2, 2004 ( ASVINA 10, 1926)

d) Charging completely the Mixture -A in a Roto Granulator , having a rotor and a pan, followed by mixing it with the help of the rotor for 4-6minutes;

e) Spraying 20-60% of the Spray Solution, of step (c) , to the mixture of step (d);

Operating the Roto granulator such that the rotor's movement and Pan's movement are in adirection opposite to each other , to get agglomerates in size range of 75µ - 200μ ; f)

g) Charging completely the Mixture - B in the Roto Granulator of step (f) and mixing both the mixtures by operating the Roto granulator for 3-5 minutes such that the pan is at a speed of 20-200 rpm and the rotor is at a speed of 500-3000 rpm, keeping movement of the rotor and that of the pan in the same direction, for layering the agglomerates;

h) Spraying the remaining quantity (40-80%) of the Spray Solution to the agglomerates of step (g) , follwed by mixing for another 10-15 minutes to get granules in size range of 100 μ- 1000 μ;

i) Drying the granules of step (h) to get granules containing moisture content less than 0.5%;

j) Sieving the dried granules of step ( i) to get 95-99% w/w yield;

k) Conditioning the resulting granules obtained in step ( i ) , by passing the granules through an air chamber to get chemically stable synergistic herbicidal composition.

PROVISIONAL SPECIFICATION : 08 PAGES

DRAWINGS : NIL

COMPLETE SPECIFICATION :

19PAGES

DRAWINGS : NIL 7613 THE GAZETTE OF INDIA, OCTOBER 2, 2004 ( ASVINA 10, 1926)

PART III-SBC . 2]

194226

: 55 E4

IND. CL.

: A61K 35/02

INT . CL.

TITLE

A PROCESS OF PRODUCING AN AYURVEDIC COMPOSITIONS TO ELEVATE BASAL LEVEL OF SERUM DHEA- S ( DELIYDRO EPE . ANDROSTERONE SULFATE) .

: ALEMBIC LIMITED .

APPLICANT & INVENTORS

ALEMBIC ROAD. VADODARA - 390 003 . GUJARAT, INDIA . AN INDIAN CO

1. DR . PRANAV. BHATT .

2. FALGUNI PRANAV BHATT

INTERNATIONAL APPLICATION NO

DATED 05.10.2001

: 972 MUM 2001

INDIAN APPLICATION NO .

PRIORITY NO .

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4 , PATENTS RULES 1972 ) , PATENT OFFICE BRANCH , MUMBAI 13 .

03 CLAIMS

A process of producing a synergestic Ayurvedic compositions to elevale basal level of serum DHEA- S (Dehydro Epe Androsteronl sulfate ) in liquid / suspension form is produced in the following steps:-

i) taking the active ingredients, Shilajeet 85 to 95 % W/W and Coral / Oyster shell 5 to 15% W/W in a liquid tank adding distilled mineral water about 90 times ofthe active ingredients and boiling at a temperature upto 80° centigrade for about 3 hours;

ii) stirring the mixture for about 1 hour to prepare homogenous liquid (decoction );

adding 66% W/V Sugar into distilled Mineral Water taken in a separate tank and boiling the same to completely disperse the sugar in water and adding preservatives such as Sodium Methyl Paraben 0.2% W/V, Sodium Propyl paraben 0.02 % W/V. Sodium Meta bisulphate 0.3 % W /V in the syrup;

iv) filtering the decoction of step. ii and the syrup of step iii preferably with the help of cotton filter pad to remove impurities and mixing well the filtered said decoction and the said syrup;

v) adjusting the pH in between 5 to 6.5 by adding buffers such as Potassuim Dihydrogen Phoisphate 0.06% W/W, Dipottassium Hydrogen Phosphate . 0.08% W/W.

vi)

Drawings: 01 sheets .

Complete specification : 17 pages, 7614

[PART III-SEC. 2 THE GAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

Indian Classification

55 E

194227

International Classification' :

A61K 009/48 A61K 009/56

Title

"A PROCESS FOR THE PREPARATION OF A NOVEL DEVICE IN THE FORM OF CAPSULE OR CACHETS FOR THE DELIVERY OF PHYSIOLOGICALLY ACTIVE SUBSTANCES OR NUTRIENTS . "

Applicant

COUNCIL OF SCIENTIFIC AND INDUSTRIAL RESEARCH , Rafi Marg, New Delhi 110 001 , INDIA, an Indian body incorporated under the Registration of Societies Act (XXI of 1860) .

Inventors

SATYAWAN SINGH - INDIAN

MADHU KHANNA - INDIAN

ANIL KUMAR DWIVEDI - INDIAN

Kind of Application

Complete

Application for Patent Number 3157 /Del/98 filed on28th Oct. 1998.

Appropriate office for opposition proceedings (Rule 4, Patents Rules , 1972) Patent Office Branch , New Delhi - 110008 .

( 8 Claims ).

A process for the preparation of a novel device in the form of capsule or cachets for the delivery of physiologically active substances or nutrients , which comprises the steps of : ( i) preparing a 10-20% mucilaginous solution of polysaccharide selected from tamarind seed polyose , cassia tora, cassia javenica purified isapgol mucilage, cellulose derivatives , by warning at 50-80° C in a polar solvent, ( ii ) adding to the said polyaccharide solution, a mixture solution comprising a disintegrating agent (5-20%), a plastisizer ( 5-20% ) , a preservative (0.1-0.5%) respectively of the kinds such as here in described, ( iii) coating the resultant solution obtained at step ( ii) orn to pre- lubricated formers of desired shape and size such as capsule or cachets , (vi ) drying the coated formers at a temperature ranging 50-70°C the by conventional methods as desired herein (v) polishing the device using known polishing agents by conventional manner .

(Complete Specification 9 Pages Drawings Nil Sheet) 317615 PART III SEC. 2]

THE GAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

: 32.F 2B

IND. CL.

C 07 D 207/14

INT. CL.

TITLE

PROCESS FOR PREPARING A PYRROLINES .

BAYER AKTIENGESELLSCHAFT

APPLICANT

food ae0

A GERMAN COMPANY

OF D- 51368 LEVERKUSEN

GERMANY

INVENTORS

1. ANDREWPLANT

2, RUDIGER FISCHER

3. THOMAS SEITZ

4. CHRISTOPH ERDELEN

メール

5. ANDREAS TURBERG

6. OLAF HANSEN

INTERNATIONAL : APPLICATION NO .

25 /MUM/2002 DATED 14/01/2002

INDIAN 1 APPLICATION NO

101 06457.8 DATED 13/02/2001 OF GERMAY

PRIORITY NO . :

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4, PATENTS RULES 1972 ) , PATENT OFFICE BRANCH, MUMBAI 13 .

02 CLAIMS

1. Process for preparing A1 - pyrrolines of the formula (

in which

R' represents halogen , in each case optionally substituted alkyl or alkoxy or -S (O)WR ,

To leit Fotiautoyo Ayala totoimedna ilumijo siau nous ni ansanqur

7616

THE GAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

[PART III-SBC. 2 R2 and R³ independently of one another represent hydrogen, halogen or in each case optionally substituted alkyl , alkoxy or alkoxyalkyl ,

R4 represents optionally substituted alkyl ,

Het represents heteroaryl which is optionally mono- or polysubstituted by identical or different R³ ,

RS represents the grouping -X- Y- Z-B with the proviso that Y does not represent a direct bond if X does not represent à direct bond,

X represents a direct bond, oxygen, -S (O) - , -NR- , carbonyl , carbo- nyloxy, oxycarbonyl , oxysulphonyl ( OSO2) , alkylene, halogenalkylene, alkenylene, halogenoalkanylene, alkinylene, alkyleneoxy, oxyalkylene , cyclopropylene or oxiranylene , oxyalkyleneoxy, -S (O)w- alkylene ,

JO represents a direct bond or represents in each case optionally substituted phenylene , naphthylene , tetrahydronaphthylene heterocyclylene,

Z represents a direct bønd or -(CH2)a- ,

E represents hydrogen , halogen , hydroxyl , cyano, formyl, nitro, trialkylsilyl , pentafluorothio, S(O) R , OSO₂R ' , -NR'R', -COR', -CO₂R' , -OC (O) R ' , -CONROR " , -N (R ) COR ", -C(R ) -N- ORIS, -SO₂NRR " ; represents in each case optionally substituted alkyl , alkenyl , alkinyl , alkoxy, aikenyloxy, cycloalkyl , cycloalkylalkyl , cyclosikyloxy , aryl , arylalkyl , aryloxy, aryloxyalkyl , saturated or unsaturated heterocyclyl or heterocyclylalkyl ,

R represents in each case optionally substituted alkyl , cycloalkyl , cycloalkylalkyl , aryl or aryialkyl,

R' represents in each casa optionally substituted alkyl , cycloalkyl , aryl or arylalkyl , 7617 THE GAZETTE OF INDIA, OCTOBER 2, 2004 ( ASVINA 10, 1926)

PART III-Sac. 2]

R and R independently of one another represent hydrogen, -SO₂R , COR ", -CO₂R", represent in each case optionally substituted alkyl , alkenyl , cycloalkyl , cycloalkylalkyl , aryl , atyinikyl or saturated or unsaturated heterocyclyl or heterocyclylalkyl ,

R and Rº furthermore together represent in each case optionally substituted alkenylene or alkylene, where the alkylene chain may in each case be interrupted by -O- , -S- or -NR "- ,

Rio and R " Independently of one another represent hydrogen, -SO₂R', represent in each case optionally substituted alkyl , alkenyl , cycloalkyl ,

cycloalkylalkyl , aryl , aryialkyl or saturated or unsaturated heterocycly! or heterocyclylalkyl ,

R10 and R " furthermore together represent optionally substituted alkylene, where the alkylene chain may ¿ n each case be interrupted by -O- , -S- or-NR" ,

R¹ª and R¹³ independently of one another represent hydrogen , represent in each case optionally substituted alkyl , cycloalkyl , cycloalkylalkyl , aryl orarylalkyl ,

R¹¹ and R¹ furthermore together represent in each case optionally substituted aikylane or alkenylene,

t R14 and R¹ , independently of one another represent hydrogen, represent in each case optionally substituted alkyl or alkenyl ,

R16 and R¹ " independently of one another represent hydrogan , represent optionally substituted alkyl or cycloalkyl ,

R16 and R1 " furthermore together represent optionally substituted alkylene, alkoxyalkylene or alkylthioalkylene ,

13 2070 2004 7618

THE GAZETTE OF INDIA , OCTOBER 2, 2004 (ASVINA 10, 1926)

[PART III-Sec:2 18

R represents hydrogen , -SO₂R', -COR' or -CO₂R"; represents in each case optionally substituted alkyl , alkenyl , cycloalkyl , cycloalkylalkyl , aryl , arylalkyl or saturated or unsaturated heterocyclyl or heterocyclylalkyl ,

W represents 0, 1 or 2 ,

n represents 1 , 2, 3 ог 4 .

characterized in that

(A) amino ketones of the formula ( II)

Het

HN. OtBu

(日)

in which

R1 , R2 , R3 and Het have the meanings given above are treated with a known Lewis acid or a known protonic acid of the kind such as herein described , if appropriate in the presence of a known diluent of the kind such as herein described to obtain the desired product .

Comp. Spedn.: 147 Pages

Drawings: NIL

7619 PART III-Sac.2]

THE GAZETTE OF INDIA, OCTOBER 2, 2004 ( ASVINA 10, 1936)

194229 IND. CL.

: 128 G

INT. CL.

: G01 N 1/30

TITLE

: A MICROSCOPE SLIDE HEATING , SYSTEM

APPLICANT

: VENTANA MEDICAL SYSTEMS , INC . , OF 3865 N. BUSINESS CENTER DRIVE , TUCSON , ARIZONA 85705 , UNITED STATES OF AMERICA .

INVENTOR

1) WILLIAM RICHARDS

2) CHARLES D LEMME

3) KIMBERLY CHRISTENSEN

4) ETHEL MACREA

: PCT/US99/04181

INTERNATIONAL APPLICATION NO

IN/PCT/2000/00333 /MUM

DATED 28/08/2000

INDIAN APPLICATION NO . :

PRIORITY NO .

: 60/076,198 DATED 27/02/1998 OF U.S.A.

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4 , PATENTS RULES , 2003), PATENT OFFICE BRANCH , MUMBAI - 13 .

05 CLAIMS

A microscope slide heating system for maintaining different target temperatures for a plurality of microscopic slides comprising:

heating units generating heat output for each ofthe plurality ofstides; temperature sensors for each of the plurality of slides ; and processor in communication with the temperature sensors ; and means for modifying the heat output of the heating units for each of the plurality of slides , the means for modifying in communication with the processor.

COMPLETE SPECIFICATION : 30PAGES

DRAWINGS: 16 SHEETS

56 7620

[PART III-SEC . 2 THE GAZETTE OF INDIA, OCTOBER 2 , 2004 ( ASVINA 10 , 1926)

194230

IND . CL.

1 E, 83 B , 92 Ε .

INT . CL .

: C 12 N 9/24 ; 9/28 A 21 D 2/26; 8/04 .

TITLE

A PROCESS FOR MAKING A BAKERY PRODUCT .

APPLICANT .

DANISCO A/ S ,

OF LANGEBROGADE 1 , P.O.BOX 17 , DK - 1001 , COPENHAGEN K , DENMARK .

1 ) KARSTEN M. KRAGH ,

INVENTOR. ( S )

2) BJARNE LARSEN ,

3) PREBEN RASMUSSEN ,

LENE DUEDAHL-OLESEN,

4)

5) WOLFGANG ZIMMERMANN.

3 INTERNATIONAL : PCT/ IB 99/00649 DATED 30.03.1999

APPLICATION NO

INDIAN

IN /PCT/2000 /00400/ MUM DATED 14.09.2000

APPLICATION NO .

: 0457/98 DATED 01.04.1998 OF DENMARK.

PRIORITY NO .

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4 , PATENTS RULES , 2003 ) , PATENT OFFICE BRANCH, MUMBAI - 13 .

12 CLAIMS

Aprocess for making a bakery product comprising adding to a starch medium a non-maltogenic exoamylase that is capable of hydrolyzing starch by cleaving off one or more linear maltooligosaccharides predominantly consisting of from four to eight D- glucopyranosyl units , from the non- reducing ends of the side chains of amylopectin .

Drawings - 7 - sheets

Comp.specn .: 61 pages 7621 THE GAZETTE OF INDIA, OCTOBER 2 , 2004 ( ASMINA 10, 1926)

PART III-SBC. 2]

194231

: 196 A

IND . CL.

INT . CL .

: Η 05 Κ 7/20 , H 02 В 1/561 ..

TITLE

A SWITCHGEAR CABINET .

APPLICANT

RITTAL - WRK RUDOLF LON GMBH & CO . , KG , AUF DEM STUTZELBERG , D - 35745 IHERBORN , GERMANY.

INVENTOR

ADAM PAWLOWSKI

INTERNATIONAL

PCT / EP 98/08257 DATED 16.12.1998

APPLICATION NO

INDIAN .

IN/ PCT/ 2000 /00271 / MUM DATED 07.08.2000

APPLICATION NO .

PRIORITY NO .

: 198 04 906.4 DATED 07.02.1998 OF GERMANY.

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 . PATENTS RULES 2003 ) , PATENT OFFICE BRANCH , MUMBAI - 13 .

06 CLAIMS

A switchgear cabinet having a double- walled wall used as a heat exchanger and formed by an outer and an inner wall elements ( 20 and 21 ) , wherein the inner wall element ( 21 ) is provided with openings ( 22 ) for connecting a fan in the upper and lower area, characterized in that:

the fan comprises a fan unit (3 ) connectable to an intermediate housing (40 ) ,

wherein the fan unit (30 ) operable as a suction or a pressure fan consists of identical fastening flanges (31,32) on the inlet and the outlet sides , and the intermediate housing 40) consists of an inlet fastening plane (41 ) and an outlet fastening plane (49 ) .

( wherein the fastening flanges (31,32 ) are aligned parallel with each other and connectable selectively with an inlet fustening plane (41 ) .

the outlet fastening plate (49 ) is connectable with the inner wall element (21 ) and is at an acute angle with the inlet fastening plane (41 ) ,

a fan unit ( 30 ) , which is connected as a suction fan with the intermediate housing (40 ) , is connected via the intermediate housing (40 ) in the area of an upper opening ( 22 ) with the inner wall element ( 21 ) , and

the air flow in the heat exchanger, which was aspirated from the switchgear cabinet . has a downward oriented component , while a fan unit ( 30 ), which is connected as a pressure fan with the intermediate housing (40 ) aspirates the air flow out of the heat exchanger with a component directed from the top to the bottom and returns it to the switchgcar cabinet.

Comp.specn.: 09 pages Drawings: 02 sheets

11 7622

THE GAZETTE OF INDIA, OCTOBER 2, 2004 ( ASVINA 10, 1926)

[PART III-Sac. 2 : 31 C

194232 IND . CL .

INT. CL .

1101 1. 21/20

TITLE

: A METHOD OF FABRICATING GALLIUM NITRIDE SEMICONDUCTOR LAYER AND A STRUCTURE OF GALLIUM NITRIDE SEMICONDUCTOR

APPLICANT

NORTH CAROLINA STATE UNIVERSITY

I HOLIDAY HALI . CB # 7003 , RALEIGII , NORTH CAROLINA 27695-7003 . UNITED STATES OF AMERICA

INVENTOR

1 ) ROBERT FOSTER DAVIS

2 ) OK - HYUN NAM

3 ) TSVETANKA ZHELEVA

4 ) MICHAEL DAVID BREMSER

INTERNATIONAL

PCT/ US99/ 04336 DATED 26/02/1999

APPLICATION NO

INDIAN

IN /PCT/ 2000 / 00106 /MUM DATED 20/06/2000

APPLICATION NO .

PRIORITY NO .

a) (09/032,190 DATED 27/02/1998 OF U. S. A.

b) 09/031.843 DATED 27/02/1998 OF U. S. A.

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES 2003 ) , PATENT OFFICE BRANCII , MUMBAI - 13 .

39 CLAIMS

1 ) A method of fabricating a gallium nitride semiconductor layer that comprises the steps of masking an underlying gallium nitride layer ( 104 ) with a mask ( 106 ) that includes an array of openings therein and growing the underlying gallium nitride layer through the array of openings and onto the mask to thereby form a first overgrown gallium nitride semiconductor layer ( 108 ) , characterizedby the additional steps of: masking the first overgrown gallium nitrile layer ( 108 ) with a second mask ( 206 ) that includes a second array of openings therein, the second array of openings heing laterally offset from the first array of openings ; and

growing the first overgrown gallium nitride layer through the second array of openings and onto the second mask , to thereby form a second overgrown gallium nitride semiconductor layer ( 208 ) ,

2080

2080 2080 2080

1080 210

208 210

208b 19/3080

1080 2080210

210 2085/1086

108b

/ 206

2080

2080 108 1096

26 PAGES

COMPLETE SPECIFICATION :

106

SO2

106- DRAWINGS : 06 SHEETS

104

$10 2

1999 167 1999

1049

GON

AIN

102

6H- SC/00011

1020

108b

108b 7623 THE GAZETTE OF INDIA, OCTOBER 2, 3004 (ASVINA 18/1906)

PART III-Sac.2]

206 B

194233 :

IND . CL

: H 04 B 7/00

INT. CL .

G 09 B 5/10

G 09 3 5/14

TITLE

: A DEVICE FOR INTERACTIVE PRESENTATION TO AUDIENCE.

MOHAN TAMBE , AN INDIAN NATIONAL ,

APPLICANT

74/F , VENUS , WORLI SEA FACE , MUMBAI - 400 018 , MAHARASHTRA , INDIA .

1. MOHAN TAMBE

INVENTOR

2. SAMAR SINGH

3. PULLAT DEVADAS MENON

INTERNATIONAL : APPLICATION NO

: 369/BOM/ 1999 DATED 17/05/1999

INDIAN APPLICATION ΝΟ.

COMPLETE AFTER PROVISIONAL SPECIFICATION FILED ON 25/05/1999 APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS

(RULE 4 , PATENTS RULES , 2003 ) , PATENT OFFICE BRANCII , MUMBAI - 13 .

DACLAIMS

Adevice for interactive presentation to audience, such device allowing presenter to nequire / evaluute spontaneous / olicited feedback in terms of preferred choices or voleed responses comprising : a controller having a VOA/video in and out , and Audio in and out ports and adapted to commandente with other components in wireless manner; at least one register comprising an alpha numeric keyboard , a serial identification port and n microphone / speaker;

at least one prosenter comprising function keys , a sliding selector , a mlerophone / speaker ; and at least one battery powered unit having a distinct identification number, a sliding selector , a send key, a listen key and a microphone ; and the said register, prosenter and battery powered unft adapted to receive signals from , and transmit signals to, with the said controller in wireless manner.

DRAWINGN ASHEETS

15 PAGES

DRAWINGS 4 SHEETS

19PAGES

PROVISIONAL SPECIFICATION COMPLETE SPECIFICATION :

7624

THE GAZETTE OF INDIA , OCTOBER 2 , 2004 ( ASVINA 10, 1926)

[PART III-SEC. 2 IND . CL .

: 146 C

194234 INT . CL .

: G01 B 11/04 , 21/06 13 65 G 43/02, G01L 5/04

TITLE

: DEVICE FOR CONTINUOUSLY MONITORING THE JUNCTION OF A CONVEYOR BELT .

APPLICANT

ΡΠΟΕΝΙΧ ΑKTIENGESELLSCHAFT OF HANNOVERSCHE STRASSE 88 ,, 1) -- 21079, 11AMBURG , GERMANY.

INVENTORS

WOLFGANG SCIINELL

INTERNATIONAL : PCT/ DE 99/00169 DATED 25.01 . 1999

APPLICATION NO

INDIAN

IN / PCT / 2000/ 00049/ MUM DATED 31.05.2000

APPLICATION NO .

PRIORITY NO ,

19805754.7 DATED 13/02/1998 OF GERMANY

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS ( RULE 4 , PATENTS RULES 2003 ) , PATENT OFFICE BRANCH , MUMBAI - 13 .

32-CLAIMS .

A device for continuously monitoring the junction of a conveyor belt ( 1 ) consisting of rubber or a rubber like plastic, said conveyor belt in particular being provided with embedded strength supports ( 2 ) , whereby the junction area (6 ) comprises a head (7) and an end (8 ) and the device for determining deviations Trom the rated values consists of at least the following components:

At lenst two , in particular four reference marks ( 9 , 10 , 25 , 26, 27, 28 ) arranged in such away that at least one reference mark , in particular two reference marks are located in each of the junction head ( 7 ) and the junction end (8 ) and pormanently worked into the edge zone of the bottom side (3 ) or the top (carrier) side (4 ) of the conveyor belt , or within the lateral edge zone (5 ) extending between the bottom and the top sides , whereby the reference marks are resistant to higher temperature and pressure loads as well as to moisture and other mechanical and chemical strosses;

A reference mark detection system ( I , III ) adapted to the type of reference mark employed for mensturing the speed and also the length of the junction , whereby the referencemark detection system is arranged on the left and / or on the right viewed in the direction of travel of the conveyor belt ;

207625 THE GAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

PART I -Sec.2]

A signal processing system ( 17,18 ) for the reference mark detection system based on time measurement, whereby the signal supplied by the reference mark detectors ( 11,42, 13 , A , B , C , D ) are processed and adapted in such a way that the beginning and the end of the time measurement can be reliably and précisely triggered;

An identification system ( II , HI ) independent of the direction of travel of the conveyor belt , said identification system comprising the following :

an address ( 14 , 22,29, 30 ) for identifying the measuring site , said address being located outside of the junction area (6 ) near the head of the junction (7 ) and/or the end (8 ) of the junction , whereby the address is arranged on the left, and/ or the right viewed in the direction of travel of the conveyor belt, specifically within the edge area of the bottom slde ( 3 ) or the top ( carrier ) side (4 ) of the conveyor belt, or within the lateral edge zone ( 5) extending between the bottom and the top sides ;

an address detector ( 15 , 23 : C, D ) adapted to the type of address employed , said addross detector also being arranged on the left and / or the right viewed in the direction of travel of the conveyor belt ; as well as

a reading device ( 16, 24) for the address , sald reading device in turn being connected to the address detector;

a time mensuring member ( 19 ) connected with the signal processing system for the reference mark detection system;

11 אוטונוtiring system ( IV ) for determining the temperature of the belt and the ambient temperature;

another measuring system (V) for determining the tractive force of the belt , as well as a process compitter (20) for the purpose of evaluating all data, whereby the process computer ( 21 ) Is In turn connected to a drive control.

Drawings - 4- sheets,

אסטווין28:.Comp.spoen

14 2670 2014 7626

[ PARPA SC. 2 THE GAZETTE OF INDIA, OCTOBER 9 , 2004 (ASΧΙΝΙΑ ΜΟΣ 1926)

IND. CL .

1 127 A

194294235 : A 47 L 5/30 F 16 D 43/206

INT. CL .

TITLE

: A CLUTCH MECHANISM .

APPLICANT

: NOTETRYLIMITED

A BRITISH COMPANY OF KINGEMBAD MILL, LITTLE SOMERFORD , WHITSHIRE, SN 15 SUN , UNITED KINGDOM.

INVENTORS

1 ) GEOFEREY MICHABL/ BURLINGTON

2) JAMES DYSON

: PCT/GB 98/03654/ DATED 08.12/ 1998

INTERNATIONAL APPLICATION NO

: IN/PCT/ 2000/00064 / MUMADATED 07.06.2000

INDIAN APPLICATION NO .

PRIORITY NO .

9725943.5 DATED 0842/1997 OF UNITED KINGDOM.

APPROPRIATE OFFICE FOR OPPOSITION PROCHEDINGS (RULE 4, PATENTS RULES 2003 ) ; PATENT OFFICE BRANCH, MUMBAI - 13.

16.CLAIMS

A clutch mechanism having a spindle, on which is mounted a driven pulley, a drive pulley to which a load is applied, at least one friction plate arranged to rotate with the driven pulley and at least one clutch plate, the clutch mechanism haying an engaged position in which the friction and clutch plates are pressed together so as to transmit torque therebetween such that the torque applied in use to the driven pulley is transmitted to the driven pulley and a disengaged position in which the friction and clutch plates are released so as to be independently rotatable such that torque applied in use to the driven pulley is not transmitted to the drive pulley, the clutch mechanism further comprising override means by which at least a proportion of the torque applied to the driven pulley is absorbed when the load applied to the drive pulley exceeds a predetermined value, the override means comprising a pair or detent plates, the detent plates being pressed together so as to transmit torque therebetween in the engaged position, and the detent plates being rotatable with respect to one another when override occurs , the override means being separate and axially displaced from the drive pulley and the driven pulley.

100

Comp.specn.: 20 pages Drawings - 4 - sheets .

24 201

Fig. 1 PARDU

THE GA ZRANE

7627 25

OCTOBER , 2000 回

IND. CLOL

19423635 F 16 N - 23/00 .

INT.CLAL

TITLELE

A PROCESS FOR THE PREPARATION OF A LUBRICATING GREASE COMPOSITIONON

APPLICANTAT :

INDIAN OIL CORPORATION LIMITED , AN INDIANA COMPANY OF 0-9, ALI YAVAR JUNG MARG , BANDRA (BAST), MUMBAI- 400 051 , MAHARASHTRA, INDIA.

INVENTORSRS

(1 )

SENTHIVEL PARAMASIVAM

(2) ( 2 ) MISHRA GOPAL SWAROOP.OP

(3) (3) KUMAR ANOOP

(4) (4 ) NAITHANIKANTA PRASAD

(5) ( 5) МЕНТА ASHOK KUMARAR

(6) (6: RAJE NIRANJAN RAGHUNATH

DATED----

INTERNATIONALAL : APPLICATIONONONO

147 MUM 2003 DATED 04.02.2003003

INDIANAN

APPLICATION ΝΟΝΟ .

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RUREA, PATENTS RULES 1972), PATENT OFFICE BRANCH, MUMBABAI3..

13 CLAIMS

Aprocess for preparing a lubricating grease composition comprising

heating a substantial portion of the total amount of base oil to 60-10010

(i)

adding slowly 5-20% by weight of preformed soap with mixing, ng

(li )

(iii ) further raising the temperature of the mixture to 90 to 180 ° C slowly in 1 hus to 5 hrs

(iv) adding the memaining portion of the base oil and cooling the mistare to 70-80% C , C

(v) adding - 5% by weight of de geiler to obtain the lubricating grease composition and adding 0-20% by weight of additive to obtain said lubricating grease composition...

Drawings:NIL

Comp.specn.: 15 pages [PART III-SEC: 2 7628

THE GAZETTE OF INDIA, OCTOBER 2 , 2004 (ASVINA 10, 1926)

194237:

142

IND . CL .

B32 B 003/10

INT . CL.

TITLE

A. MULTI LAYERED DECORATIVE COMPOSITION AND METHOD OF MAKING THE SAME .

APPLICANT

: PREMARK RWP HOLDINGS , INC . OF 1300 MARKET STREET, WILMINGTON , DELAWARE 19801 , U.S.A. AMERICAN COMPANY

INVENTORS

: ( 1 ) MARK KREJCHI

(2) ROBSON MAFOTI

(3 ) TONY ORISEH

(4 ) JIM GONZALES

(5 ) MIKE INGRIM

INTERNATIONAL :

APPLICATION NO

: 453 BOM 1999 DATED 18.06.1999

INDIAN

APPLICATION NO .

09/161,270 DATED 26.09.1998 OF U.S.A

PRIORITY NO . :

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4 , PATENTS RULES , 2003 ) , PATENT OFFICE BRANCII , MUMBAI - 13 .

10 CLAIMS

Amulti layer decorative composition comprising:

(a) a substrate comprising , a polymer foanı , a resin matrix of at least one polymer selected froin the group consisting of acylonitrile -butadiene - styrene polymers , polycarbonates , polystyrenes , polyphenylene oxide and polyvinyl chloride polymers; and

(b) one or more decorative layers bonded to said substrate, wherein the decorative layer is selected from the group consisting of decorative laminate , microveneer decorative laminate, metal films , metal foils , metal sheets , solid surface nisterials , solid surface vencer , solid surface laminate , and solid surfacing dimensional laminate .

Drawings : ( 1 sheet

Comp.specn . 14 pages 7629 THE GAZETTE OF INDIA, OCTOBER 2, 2004 ( ASVINA 10, 1926)

PART III-SEC.2 ]

Ind.Cl .

194238

: 32 F2

INT. CL.

: C07D - 215/ 00

TITLE

: NOVEL PROCESS FOR PREPARATION OF MOXIFLOXACIN APPLICANT

: CIPLA LIMITED, 289, BELLASIS ROAD , MUMBAI CENTRAL , MUMBAI 400 008 , MAHARASHTRA , INDIA . AN INDIAN COMPANY.

INVENTORS : 1 ) KANKAN RAJENDRA NARAYANRAO .

2) RAO DHARMARAJ RAMCHANDRA

3 ) PATHI SRINIVAS LAXMINARAYAN

4) NARAYAN BHANU MANJUNATH

INTERNATIONAL APPLICATION NO :

: 175 MUM 2003 DATED 07.02.2003

INDIAN

APPLICATION NO .

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4 , PATENTS RULES 2003 ) , PATENT OFFICE BRANCH, MUMBAI - 13.

07 CLAIMS

1. A process for the preparation of Moxifloxacin or analogs thereof of formula I characterizat in that

the said process comprises of

a) preporation of compound of fornila IV by reacting compound ofTornmoto II with specific, reagents

( IV)

( II)

b ) reneting a compound of formula IV with a compound of formula 111 to obtain a compound of formula V

Drawings: NIL

Comp.specn.08 pages 7630

[PAM -Sine. 22 THE GAZETTE OF INDIAL OCTOBER 9, 2000 (ASVANXIЮ, 1926)

OMe

(III)

c) de- protecting the compound of the formula V to obtain moxifloxacin of , formula fa

OMe

F H H

(1) ) ) 317 ARTRAM BI Sac. 2]

194239 .

195195 B

INMIND. CL.

F16K47/02

INT. CL.

AHIGH DIFFERENTIAL- PRESSURE VALVE

TITLE

OKOSO CO. LTD

APPLICANT

19819BAN 680200, NISHIBASHI 1 -ONOME, MIMINATO- KU ) TOKYOS 10500003, JAJARAN

1 ) TAKASTIKEGAYA

INVENTOR

2) YOSHIO MURANAKA

3) HIROYUKI MOROOKA

PCT/9999/09869 DATED 08/04/5999

INTERNATIONAL APPLICATION NO

NIN/PCT/2000/00338/MUM DATED/ 30 /08/2000

ININDIAN APPLICAΤΙΟΝ ΝΟ .

PRIORITY NO .

APPROPRIATE OFFICE FOR OPPOSITION OROCEDDINGE ( RULE 4 , PATENTS RULES 2003 ) , PATENT OFFIOR BRANCH , NUMΒΛΕ. 13.

06.CLAIMS

1 ) A high - differential -pressure valve for regulating quantity of luch finyyliegifratia Bild slet in a fluid outlet, comprising saldi fluid inlet and said fluid outlet;

avia valve plug container equipped with a cagepand

a vajve plug moving up and down sliding in the eage, saidcage having more than one through hole, and said valve plug alosing on opening said through holes by moving up or down in the cage for regulating Auld flow, wherein each of sald through holes forms an separated conduit piercing in through the wall of the cage , said separated conduit having one or more bonding passage portions located between the inner surface and the outer surface of the cage, and wherein each of said bending passage portions is formed in a piano which is paralleled to the surface of the cage, and has at least one bend between an inlet and an outlet of said parallel plane concerned.

.DRAWINGSLINIL

18 PAGES

COMPLETE SPECIFICATION :

7632

[PART III-SEC. 2 THE GAZETTE OF INDIA , OCTOBER 2, 2004 ( ASVINA 10, 1926)

IND . CL .

194240

129G 129B

INT . CL .

E 04 G 21/12

TITLE

METHOD OF PRODUCING PRE- STRESSED WIRE , APPLICANT

: MAHOLAY SHARAD JANKIPRASAD,

AN INDIAN NATIONAL, 12 , PARUL,

VISHWA BHARATI SOCIETY, 4TH FLOOR, JUHU LANE, ANDHERI ( WEST) , MUMBAI 400 058, MAHARASHTRA , INDIA .

AND PATANKAR ASHISH SAINATH , AN INDIAN NATIONAL, 26 , KESHAV APARTMENTS , KASTUR PARK, SHIMPOLI ROAD , BORIVILI (WEST) , MUMBAI 400 092, MAHARASHTRA , INDIA ....

INVENTOR

-IDEM-

PATENT

: 507/BOM/ 1999 DATED 13/07/1999

APPLICATION NO .

COMPLETE AFTER PROVISIONAL SPECIFICATION FILED ON 12/10/2000 APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4, PATENTS RULES , 2003 ) , PATENT OFFICE , MUMBAI - 13.

04 CLAIMS

Amethod of producing pre - stressed wire comprising of drawing a metal wire by subjecting a length of elongated metal stock to a wire drawing operation by passing the length of elongated metal stock through number of dies having reducing diameters and finally drawing the wire , the said dies having helices of predetermined pitch made in the Inner portion thereof or through a rotating die having straight grooves on its inner portion, the said die rotating around its own axis at a predetermined speed of rotation .

05 PAGES

PROVISIONAL SPECIFICATION :

DRAWINGS : 4 SHEETS COMPLETE SPECIFICATION :

06 PAGES

NIL

DRAWINGS :

THE GAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

PART I-Sac. 2]

10-1

194341

55F

IndianClassification

C 12 N 1/00 ; C12 N/5 /00

International Classification :

Title

"A PROCESS FOR PREPARATION OF CULTURE MEDIUM FOR RAPID DETECTION OF STREPTOCOCCUS FAECALIS IN WATER " .

Applicant

THE ADDITIONAL DIRECTOR ( IPR), Defence Research & Development organization , Ministry of Defence , Government of India, B -341 , Sena Bhawan , DHQ P.O. NEW DELHI - 110011 .

ANTARYAMI SINGH

Inventors

PARMESHWARI MALODIA

SURENDRA KUMAR JAIN

RAM GOPAL -ALL INDIAN

COMPLETE

Kind of Application

Application for Patent Number 773/DEL/2001 filed on 18/07/2001 .

Appropriate office for opposition proceedings ( Rule 4 , Patents Rules, 1972) Patent Office Delhi Branch, New Delhi - 110 008.

(09Claims)

Aprocess for the preparation of a culture medium for rapid detection of streptococcus faecalis in water comprising dissolving 1.5 t 2 % w/v of tryptose , 0.3 to 1 % w /v of beef extract, 0.3 to 1 % w/ v of glucose, 0.5 to 1.5% w/ v of bromothymo ! blue in water, keeping pH at 7.2. followed by incubation which is carried out at temperature between 40-45 °C to obtain the culture medium .

(Complete Specification Pages 07 Drawing NIL Sheet)

1526701/2004 7634

THE GAZETTE OF INDIA, OCTOBER 2 , 2004 (ASVINA 10, 1926)

[PART III-SEC. 2 IND . CL .

: 68 E1

194242 INT . CL .

: G01 R- 027/08

TITLE

: A CONTROL DEVICE FOR REGULATING THE COI L CURRENT OF ELECTROMAGNETIC FLOW SENSORS :

APPLICANT

: ENDRESS +HAUSER FLOWTEC AG OF KAGENSTRASSE 7, CH - 4153 REINACH , SWITZERLAND, SWISS COMPANY.

INVENTOR

: THOMAS BUDMIGER

INTERNATIONAL : APPLICATION NO

INDIAN

: 475/BOM/ 1999 DATED 30.06.1999

APPLICATION NO .

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4 , PATENTS RULES , 2003 ) , PATENT OFFICE BRANCH, MUMBAI - 13 .

03 CLAIMS

said coil current being generated by a circuit arrangement comprising: a bridge circuit in the form of an H network having

a first bridge arm formed by the controlled current path of a first transistor,

a second bridge arm formed by the controlled current path of a second transistor ,

a third bridge arm formed by the controlled current path of a third transistor , and

a control device for regulating the coil current flowing in a coil assembly which forms part of magnetic system contained in an electromagnetic floe sensor and producing a magnetic field, which comprises a core and/or a pole piece, and which has an inductance L, said coil current being positive and having a constant first final current value in the first half of a cycle , and being negative and having a constant second final current value equal inmagnitude to the first final current value in the second half of said cycle; and a fourth bridge arm formed by the controlled current path of a fourth transistor , a first bridge diagonal between the second transistor, which is connected to the third transistor , and the fourth transistor , which is connected to the third transistor, and a second bridge diagonal between the third transistor , which is connected to the first transistor , and a fourth transistor , which is connected to the second transistor , wherein either the first and fourth transistors THEGAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

PART III-SBC. 2]

or the second and third transistors are simultaneously on;

the coil assembly, which lies in the first bridge diagonal ;

a resistor connected to the H network so as to form a series circuit, a first terminal of which is conneeted to ground and which is traversed by the coil current ; and a controlled voltage source which

has a voltage output and

determines a voltage developed across the series circuit;

said voltage having in each half- cycle an initial voltage value during a rise time. of the coil current-- as a first subcycle-which is higher than a final voltage value during a second subcycle representing the remainder of the half-cyole; said method using the voltage drop across the resistor ,

on the one hand, to maintain the final voltage value constant for forming the first and second final current values , and on the one hand, to compensate for the effect of eddy currents , which are induced in the cores and/or the pole pieces during the rise of the coil current and which delay the leading edge of the magnetic field with respect to that of the coil current, by

influencing in each half- cycle the rise time of the coil current and the magnitude of the final voltage value in such a manner that after the coil current has reached a maximum, no further rise of the coil current will occur, so that the magnetic field will reach a constant final value corresponding to the constant final value of the coil current already when the coil current reaches its maximum ,

with the waveform of the voltage drop across the resistor during a half- cycle after the maximum of the coll current until the attainment of the final current value being sampled at least three times in succession to form a correction quantity for the voltage across the H network in the next half-cycle.

23PAGES

COMPLETE SPECIFICATION :

DRAWINGS: 8 SHEETS 7636

THE GAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

[PART III Sec. 2 IND. CL .

: 145 C

194243 INT . CL .

: G 02 B 1/10 , G 02 C 7/12, G 02 C 7/10

TITLE

: A SPECTACLE LENS AND A METHOD OF PRODUCING THE SAME

APPLICANT

: AOYAMA OPTICAL CO. , LTD. OF 3-30, KAMINAKACHO 2 - CHOME, SABAE - SHI , FUKUI 916-8505, JAPAN, JAPANESE CO .

INVENTOR

: TAGAWA ETSUO

INTERNATIONAL : APPLICATION NO INDIAN

: 532/BOM/ 1999 DATED 27.07.1999

APPLICATION NO .

PRIORITY NO

: 10-217917 DATED 31/07/1998 OF JAPANESE

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4, PATENTS RULES, 2003), PATENT OFFICE BRANCH, MUMBAI - 13.

08 CLAIMS

A spectacle lens wherein a number of infrared rays absorbing thin films are dotted on an ocular side surface of said lens, said infrared rays absorbing film having semi-reflexibility and semi - transmittancy.

COMPLETE SPECIFICATION:

11 PAGES

DRAWINGS: 6 SHEETS THEGAZETTEOF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

PART II-SBC. 2]

194244

32C

IND . CL .

: C 07 H 11/00

INT . CL .

TITLE

AN IMPROVED PROCESS FOR THE PREPARATION AND ISOLATION OF SUCROSE FATTY ACID ESTERS .

VASANTDADA SUGAR INSTITUTE ,

APPLICANT

MANJARI ( BK . ) , TALUKA HAVELI , DIST . PUNE - 412307,

MAHARASHTRA STATE, INDIA.

: 1. DR.TANAJI GANAPAT KOLEKAR ,

INVENTOR

2. DR. SHASHIKANT PURUSHOTTAM PHADNIS , INTERNATIONAL APPLICATION NO

1107 MUM 2000 DATED 08.12.2000

INDIAN APPLICATION NO .

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4 , PATENTS RULES , 2003 ), PATENT OFFICE BRANCH , MUMBAI - 13.

02 CLAIMS

An improved process for the preparation of sucrose fatty acid ester comprises of reacting sucrose and fatty acid ester i.e. methyl stearate in equimolar proportions in presence of a mixture ofpotassium carbonate, calcium oxide, and soda lime as catalyst and polyethylene glycols or polyethlene others as viscosity reducers at temperature between 120° c to 160° c and under vacuum preferably between 300 to 700 mmHg for about 24 to 48 hours, after completion ofthe reaction, a highly viscous mass of sucrose esters is obtained which is then subjected to solvent extraction bydissolving in het water and organic solvents like ethyl accetate or amayl acetate or butanol , the jelly residue obtained by cooling the organic layer is repeatedly extracted with organic solvent to get a product rich in sucrose mono ester and- containing minimum quantity of free fatty acid, these are then dried under vacuan.

DRAWINGS : NIL

05 PAGES-

COMPLETE SPECIFICATION :

7638

THE GAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

[PART III-SBC. 2 IND . CL .

40 H

194245

INT . CL .

: B 01 D 53/02

TITLE

: A PROCESS FOR THE SEPARATION OF NITROGEN FROM A GAS MIXTURE INCLUDING NITROGEN AND A LESS SELECTIVELY ADSORBABLE COMPONENT .

APPLICANT

: PRAXAIR TECHNOLOGY INC .

A CORPORATION ORGANISED AND EXISTING UNDER THE LAWS OF THE STATE OF DELAWARE, OF 39 OLD RIDGEBURY ROAD , DANBURY , STATE OF CONNECTICUT.

06810-5113 , UNITED STATES OF AMERICA .

INVENTOR

1. MARK WILLIAM ACKLEY

2. FREDERICK WELLS LEAVITT

: PCT/ US 99/04383 DATED 26.02.1999

INTERNATIONAL APPLICATION NO

: IN/PCT/2000/00184/MUM DATED 14.07.2000

INDIAN APPLICATION NO .

PRIORITY NO .

: 60/076,263 DATED 27.02.1998 OF U.S.A.

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4 , PATENTS RULES 2003 ) , PATENT OFFICE BRANCH , MUMBAI - 13 .

21 CLAIMS .

A process for the separation of nitrogen from a gas mixture including nitrogen and a less selectively adsorbable component , comprising : contacting said gas mixture in an adsorption zone with an adsorbent that is equilibrium selective for nitrogen over said less selectively adsorbable component and adsorbing said nitrogen on said adsorbent, wherein said adsorbent zone comprises an adsorbent selected from the group consisting of A- zeolite , Y- zeolite , Nax , mixed cation X - zeolite , Lix , chabazite , mordenite , clinoptilolite , silica -alumina, alumina , silica , titanium silicates and mixtures thereof, wherein said adsorbent has a mass transfer coefficient (MTC ) for nitrogen of KN2 ≥ 12 S and an intrinsic diffusivity for N2 , when measured at 1.5 bar and 300K , of Dp ≥ 3.5 X 106 M²/S .

Comp.specn .: 46 pages

Drawings - 7 - sheets .

THE GAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

PART III-SBC. 2]

102D

IND. CL.

194246 : G01 F 1/58

INT. CL .

G.01 D 21/00

TITLE

ELECTRODE ASSEMBLY FOR ELECTROMAGNETIC FLOW SENSORS

ENDRESS +HAUSER FLOWTEC AG

APPLICANT

KAGENSTRASSE 7, CH -4153

REINACH, SWITZERLAND

A SWISS COMPANY

: 1 ) OLIVER GRAF

INVENTOR

2) MICHAEL SCHOOHF

: INTERNATIONAL APPLICATION NO

: 518 BOM 1999 DATED 23/07/1999

INDIAN

APPLICATION NO .

PRIORITY NO .

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4 , PATENTS RULES 2003) , PATENT OFFICE BRANCH, MUMBAI - 13 .

11 CLAIMS

1) An electrode assembly comprising:

i ) a measuring tube made of a metallic, nonferromagnetic material having a tube wall with an external surface, the measuring tube being lined with an insulating material, the measuring tube having a hole in the tube wall;

ii) an insulating body having a disk-shaped portion, a lower neck and a tubular extension, the tubular extension extending into the hole in the tube wall, the lower neck being disposed between the disk shaped portion and the tubular extension;

iii) a measuring electrode having a head and a shank, the shank having an external thread and having a smaller diameter than the head, said measuring electrode being fitted in the hole ofthe tube wall, the head engaging the insulating material lining the measuring tube, and the shank extending through the insulating material lining, and the insulating body, thereby insulating the measuring electrode from the tube wall;

7640

[PART II Sác. 2 THE GAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

iv) a cylindrical part, made of an electrically insulating , hydrophobic material and having a bottom portion and a wall portion , said bottom portion having a central opening with a diameter, said wall portion having an inside diameter greater than the diameter of the central opening, the diameter of the central opening being less then the diameter of the disk shaped portion of the insulating body , and said wall portion having an inside diameter slightly greater then the diameter of the disk- shaped portion of the insulating body, the lower neck of the insulating body extending into the central opening. v) a nut engaging the external thread of the shank of the measuring electrode; and

vi ) a spring part axially penetrated by the shank and interposed between the nut and the disk - shaped portion of the insulating body, whereby the cylindrical part and the insulating body are fixed by the nut screwed onto the external thread of the shank, with the tubular extension fitted in the hole of the tube wall , and lower neck of the insulating body and the bottom portion of the cylindrical part being supported on the external surface of the tube wall .

3 COMPLETE SPECIFICATION :

13 PAGES

42-

DRAWINGS: 02 SHEETS

943

-6

-63

44 2

Fig. 1 THE GAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

PART III-Sac.2)

: 164A

IND. CL.

194247

C 02F 3/34

INT. CL.

C12 R 1/38

A62 D 3/00-

B 09B 5/00

TITLE

: A PROCESS FOR TREATMENT OF INDUSTRIAL WASTB WATERS CONTAINING TRIPHENYLMETHANE (TPM) DYES, USING MICROORGANISMS.

APPLICANT

: AGHARKAR RESEARCH INSTITUTE ,

G. G. 'AGARKAR ROAD, PUNE - 411004, MAHARASHTRA, INDIA,

AN INDIAN SOCIETY.

INVENTOR

1. DR. PRADHNYA PRALHAD KANEKAR

2. DR . SEEMA SHREEPAD SARNAIK

INTERNATIONAL APPLICATION NO

621 /BOM/ 1999 DATED 06/09/1999

INDIAN APPLICATION NO .

COMPLETE AFTER PROVISIONAL SPECIFICATION FILED ON 25/09/2000 APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4, PATENTS RULES, 2003) , PATENT OFFICE BRANCH , MUMBAI - 13.

01CLAIMS

Aprocess for treatment of industrial waste waters containing triphenlylmethane (TPM) dyes comprises , immobilization of bacterial culture of pseudomonas mendonica on brick places, circulation of industrial waste water containing TPM dye in the range of 2 ta10 ppm, through brick media having immobilized culture as substantially described berein before, at 28 ±2 ° C for h, which results in 85 to 90% removal of TPM dyes and degradation of the dyes to carbon dioxide.

DRAWINGS: NIL

02 PAGES

PROVISIONAL SPECIFICATION :

DRAWINGS: NIL

COMPLETE SPECIFICATION : 11 PAGES

16 26701: 2004 7642

[PART III-SBC. 2.

THE GAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

IND . CL .

146 D3

194248 INT . CL .

: B 29 D 11/00

TITLE

: A METHOD FOR MOLDING TORIC CONTACT LENSES AND AN APPARATUS THEREFOR

APPLICANT

BAUSCH & LOMB INCORPORATED

BAUSCH & LOMB PLACE, ROCHESTER , NEW YORK 14604-2701 , UNITED STATES OF AMERICA

INVENTOR

1 ) WILLIAM JOHN APPLETON

2 ) KEVIN JACOB DERYKE

3 ) MICHAEL HENRY DOBNER

4) ALLEN LEE ORMISTON

5) IAN ANDREW POWELL

6) JEFFREY MICHAEL VANDEWINCKEL

PCT/US99/00652 DATED 12/01/1999

INTERNATIONAL : APPLICATION NO

IN / PCT /2000/ 00146/ MUM DATED 03/07/2000

INDIAN APPLICATION NO .

PRIORITY NO . : 60/071,617 DATED 16/01/1998 OF U. S. A.

APPROPRIATE OFFICE FOR OPPOSITION PROCEEDINGS (RULE 4 , PATENTS RULES 2003 ) , PATENT OFFICE BRANCH , MUMBAI - 13 .

20 CLAIMS

1 ) A method for molding toric contact lenses ( 16 ) having opposite anterior and posterior optical surfaces (26 , 20 ) , said toric lenses ( 16) further including a toric axis and a ballast axis formed on said opposite optical surfaces thereof, respectively , including automatically and selectively establishing any one of a plurality of predetermined axial offsets , between 0 degrees and 180 degrees , between said toric axis and said ballast axis of said lenses , wherein the toric contact lenses ( 16 ) are formed in a respective mold comprising anterior and posterior mold sections ( 12, 14) having anterior and posterior mold surfaces ( 12 ' , 14' ) , respectively, said toric axis formed on one of said anterior and posterior molding surfaces (12' , 14 ' ) , and said ballast axis formed on the other of said anterior and posterior mold surfaces ( 12 , 14' ) , said anterior and posterior moid surfaces forming said anterior and posterior optical surfaces (26, 20 ) of said lenses, respectively, and including a detectable feature on each of said anterior and posterior mold sections ( 12 , 14) at a predetermined angular location with respect to said toric and ballast axes thereof, respectively; characterized in that:

7649 PART III-SBC. 2]

THE GAZETTE OF INDIA, OCTOBER 2, 2004 ( ASVINA 10, 1926)

a) providing automatic means for detecting said detectable features on said anterior and posterior mold section ( 12, 14) ;

b) providing automatic means for positioning said anterior and posterior mold sections ( 12 , 14) with said detectable features of each of said anterior and posterior mold sections ( 12, 14) located at a known angular position .

c) rotating at least one of said anterior and posterior mold sections ( 12, 14) to establish said predetermined axial offset between said toric axis and said ballast axis;

d) charging said anterior mold section ( 12) with a predetermined quantity of liquid lens material;

e) capping said posterior mold section on said anterior mold section ( 12) with a predetermined clamping pressure , thereby forming a mold chamber (38) between'said anterior and posterior mold surfaces ( 12 ' , 14' ) ; and

f) curing said liquid lens material in said mold chamber (38) , thereby forming said toric lens having said toric and ballast axes formed on said opposite optical surfaces (26, 20) thereof at said predetermined axial offset.

FIG.3

26 PAGES

COMPLETE SPECIFICATION :

DRAWINGS : 15 SHEETS 7644

[PART III-Sac.2 THE GAZETTE OF INDIA, OCTOBER 2, 2004 ( ASVINA10, 1926)

Ind.Cl.:68D , 133 A

194249

Int.C17 : H 02 H - 9/00

" AN ENERGY CONTROLLER FOR PROVIDING ELECTRIC POWER OF PREDETERMINED VOLTAGE AND FREQUENCY TO A LOAD"

Applicant:

ELECTRONICS RESEARCH & DEVELOPMENT CENTRE

AN INDIAN SOCIETY

VELLAYAMBALAM, TRIVANDRUM 695 033 INDIA

Inventors:

1. VEEMBUR KADALAYIL NEELAKANDHAN

2. TIRUVANNAMALAI RAMAMOORTHY RAMESH

Application No: 724/MAS/ 1996 filed on 06/05/1996

Appropriate office for Opposition Proceedings (Rule 4, Patents Rules, 2003), Patent Office, Chennai Branch..

4.Claims

1. An energy controller for receiving Input ac supply and for providing electric power of predeterained veltage and frequency to a load consisting , in combination , of a frant converter comprising single phase/three phase isolator, line filter , a single phase /three phase diode rectifier , de filter , power factor improvement circuits , input current /voltage sensing circuits and under/ over voltage protection circuits , said converter rectifying the Input 數位 supply while ensuring that the input sinusoidal current is drawn at unity power factors Put inverter THE GAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

PART III-Sac. 2 ) .

7645 comprising. IGBTS and snubber circuits , the Input of the inverter receiving the output of the converter) a control circuit including a line voltage monitor for monitoring input line voltage and setting the operating point of the load, a microprocessor based PWM generator and gate driv circuits , thus for for providing PWM gate pulses for the the IGBTS and generating a pulse width modulated wave form of inverter predetermined amplitude and frequency at the output , the said output of the inverter being the input to the said load .

PWM

SPHASE A- C. MOTOR

INPUT- SINGLO

FHAER PH

ΔΙΡΕΑΣ

Διοίκη

CENTALPUSAL

CONTRO

Comp.Specn. 12 Pages: Drgs 4 Sheets .

b 7646

THE GAZETTE OF INDIA, OCTOBER 2, 2004 ( ASVINA 10, 1926)

(PART III-SBC . 2 Ind.Cl.:70 B

194250

B 03 C 3/76

Ifit . Cl :B 03 C - 3/86

" AN ELECTROSTATIC PRECIPITATOR WITH A DEVICE FOR THE SUSPENDING, GUIDDING AND RAPPING OF ONE OR MORE COLLECTING ELECTRODES "

ABB FLAKT AKTIEBOLAG ,

Applicant:

SICKLA ALLE 13 , NACKA ,

S - 120 86 STOCKHOLM, SWEDEN ,

A SWEDISH COMPANY .

Inventors: 1. FILIP KNUTSSON

Application No869 /MAS/ 1996 filed on 22nd May 1996

Convention No.9502246 - 3

on, 20th June 1995 in SWEDEN

Appropriate office for Opposition Proceedings (Rule 4, Patents Rules, 2003 ) , Patent Office , Chennai Branch .

02 Claims

1. An electrostatic precipitator with a device for the suspending guiding and rapping of one or more collecting electrodes (2) located essentiall vertically in one or more substantially parallel rows ( 1 ) , said device comprising for each row ( 1 ) a substantially horizontally oriented carrier element (3 ) to which the upper ends of the collecting electrodes (2) are attached , connecting elements which connect the carrier element ( 3 ) to the casing (5) of the electrostatic precipitator, guiding means ( 11a, 11b, 12a, 12ba 13 , 14a, 14b) for guiding the motion of each row ( 1) of collecting electrodes (2) in a transverse and/ or a longitudinal direction of the electrostatic precipitator, and a rapping mechanism (6 ) for rapping the collecting electrodes (2), characterised in that the carrier element (3 ) of each row is separately suspended by means of said connecting elements , that the connecting elements of the carrier element (3 ) comprise two elongate rods (4a , 4b) , each making an angle (a), relative to a vertical axis (V) extending through each rod, in the range of about 5-35° in such a manner that said rods (4a, 4b) are positioned substantially in the plane ofthe row ( 1 ) such that the distance between their lower ends is smaller than the distance between their upper ends thereby permitting, during rapping, a minimum, horizontal pivoting motion restircted to each row ( 1 ) of collecting electrodes (2) inthe longitudinal direction of the electrostatic precipitator.

X=10°

107

116

11a-

Comp.Specn. 12 Pages; Drgs 02 Sheets .

14b

142

Fig1 7647 PART III-SEC . 2]

THE GAZETTE OF INDIA, OCTOBER 2, 2004 ( ASVINA 10, 1926)

Ind.Cl.:127 B

194251

Int.Cl ' : F 16 D 3/38 , F 16 D - 1/064

" A DRIVESHAFT ASSEMBLY"

DANA CORPORATION ,

Applicant:

A US COMPANY, OF 3222 WEST CENTRAL AVENUE, TOLEDO , OHIO, USA

I. RICHARD A. MARANDO

Inventors:

2. DAVID J. SHAW

Application No.287/MAS /2003 filed on 03rd April 2003

Convention No.60/369, 830 filed on 03rd April 2002 in US

Appropriate office for Opposition Proceedings (Rule 4, Patents Rules , 2003) , Patent Office,Chennai Branch.

11 Claims

A driveshaft assembly comprising a driveshaft tube including an end having first and second arms extending therefrom; and a journal cross carrier secured to said end of said driveshaft tu , said journal cross carrier characterized by a closed body portion having first and second arms extending therefrom , wherein said closed body portion extends within said end of said driveshaft tube and said first and second arms of said journal cross carrier respectively engage said first and second arms ofsaid driveshaft tube.

FIG.1

Comp.Specn. 14 Pages; Drgs 04 Sheets .

7648

THE GAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

[PART III-Sec. 2 Ind. Cl.:32 F3 C

194252 Int. Cl.7 : C 07 C 53/08

" PROCESS FOR THE SELECTIVE PREPARATION OF ACETIC ACID " Applicant: CELANESE GmbH,

A GERMAN COMPANY,

LURGIALLEE 14 ,

D - 60439 FRANKFURT AM MAIN , FEDERAL REPUBLIC OF GERMANY .

Inventors: 1. Dr. HOLGER BORCHERT

2. Dr. UWE DINGERDISSEN

Application No1659/ MAS / 1997 filed on 24th July 1997

Convention No.19630832.1 filed on 31st July 1996 in GERMANY

Appropriate office for Opposition Proceedings ( Rule 4 , Patents Rules , 2003 ) , Patent Office , Chennai Branch .

11 Claims

Aprocess for the selective preparation of scetic acid from a gaseous feed comprising ethane , ethylene or mixtures thereof plus exygen at elevated temperature, which comprises bringing the gaseous feed into contact with a catalyst comprising the elements Mo , Pd, X and Y in grem atom ratice exercid in combination with oxygen

MoPdXoYa (1)

where the symbols X and Y have the following meanings:

X le one or more elements selected from the group consisting of Or, s, Nb, Ta, TI , V, Te and W;

Y is one or more elements selected from the group consisting of 8, Al , Ga, In, Pt, Zn , Cd , Bl , Ce, Co, Rh , Ir, Cu , Ag , Au , Fe , Ru, Os, K, Rb, Cs, dig, Ca, Br, Ba, Zr, Hf, NI , P , Pb , 8b , 81 , 8n , Ti and U;

theIndices a, b, c, d are the gram atom ratice of the corresponding elements, where

a =1; b > 0 ; c > 0; and d = 0-2.

Reference to : USA - 4,250,346, EPB - 0294845 , ΕΡ - Β - Ο 407 091

Comp.Specn. 19 Pages; Drgs 0 Sheets .

7649 THE GAZETTE OF INDIA, OCTOBER 2, 2004 ( ASVINA 10, 1926)

PART III-SEC. 2]

Ind.Cl.:155 F1

194253

Int.Cl:D 01 F 6/84 ; B 60 R 21/16

AN UNCOATED FABRIC

ARTEVA TECHNOLOGIES S.A.R.L

Applicant:

ofTALSTRASSE 80 , CH - 8001 ZURICH , A SWISS COMPANY SWITZERLAND

1. DR. BURKAHRD BONIGK

Inventors:

Application No1772 /MAS/ 96 filed on 7th OCT 96

Convention No.19537699-4 on, 11th OCT 95 in GERMANY

Appropriate office for Opposition Proceedings (Rule 4, Patents Rules , 2003 ) , Patent Office, Chennal Branch .

17 Claims

1 1. An uncoated fabric which has a gas permeability of less than or equal to 80 dm³ of air per minute square decimeter at a pressure drop of 500 Pa (measured as specified in DIN 53 887 ) , and which has at least two thread systems of parallel threads made of high-tenacity polyester filament yarns and having linear density of 150 to 700 dtex , and having an individual filament linear density of less than or equal to 7 dtex, wherein the polyester is a phosphorus- modified copolyester which contains a bifunctional phosphorus compound in an amount of 0.1 to 5% by weight, preferably 0.2 to 0.8 % by weight , based on the amount of phosphorus , in the polymer chain.

Comp.Specn . 18 Pages; Drgs NIL Sheets .

17 267Gl 2004 7650

THE GAZETTE OF INDIA , OCTOBER 2, 2004 (ASVINA 10, 1926)

[PART III-SEC. 2 Ind.Cl.:172

194254

Int.C1 ' : D 01 H

" A SPINNING FRAME "

Applicant: MASCHINENFABRIK RIETER AG , A SWISS COMPANY, KLOSTERSTRASSE 20 , CH - 8406 , WINTERTHUR, SWITZERLAND.

Inventors: 1. WOLF HORST

Application No1155 / MAS/ 1996 filed on 01st July 1996

Convention No. 195 37 916.0 filed on, 11th October 1995 in GERMANY

Appropriate office for Opposition Proceedings (Rule 4, Patents Rules, 2003 ) , Patent Office, Chennai Branch .

36 Claims

1. A spinning frame, a ring spinning frame in particular, with a drawing unit ( 10) comprising several , preferably three, driven drawing unit cylinders ( 12, 14, 16), and free rotatable counter-rollers being pressed against said drawing cylinders , to form at least one drawing zone, located between two respective drawing unit cylinders(12,14, 16) , together with counter- rollers assigned to them, whereby at least two drawing unit cylinders ( 12 , 14, 16) are being furnished with separate, preferably speed- controlled drive motors ( 18 , 20 , 22) and whereby at least one gear (24, 26, 28) is located in the drive line between the respective drive motor and the pertaining drive cylinder characterised in that at least one drive motor ( 22) being located at one end of a drawing unit cylinder ( 16) , together with the pertaining gear (28 ) and the drawing unit cylinder ( 16) is being shiftable at a right angle to a cylinder axis (II - II ) as a unit (30), in relation to the at least one further driven drawing unit cylinder ( 12) .

Comp.Specn . 18 Pages; Drgs 03 Sheets .

7651 THE GAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

PART III-SBC. 2]

Ind.Cl.:197 , 170

194255 Int.Cl ' : C 11 D 7/08

" A PROCESS FOR THE PREPARATION OF A CLEANING COMPOSITION FROM INDUSTRIAL WASTE / BY PRODUCTS "

Applicant: THE FERTILISERS & CHEMICALS TRAVANCORE LIMITED , A GOVERNMENT OF INDIA ENTERPRISE,

RESEARCH & DEVELOPMENT CENTRE, UDYOGAMANDAL 683 501 , COCHIN , INDIA

1. JANARDANA KURUP NANDAKISHORE

Inventors:

2. RAMAN NAIR RAJAGOPALAN NAIR

3. Dr. ALOK KUMAR BHATTACHARYA

1413/MAS/ 1996 filed on 12th August 1996

Application No :

Appropriate office for Opposition Proceedings (Rule 4, Patents Rules, 2003), Patent Office, Chennai Branch.

02 Claims

1. A process composition for the preparation of : a cleaning products, from industrial waste/by comprising the steps of contacting weak nitric acid of 55% to 66% concentration , obtained as a by product in the caprolactum industry , with ures , in stoichiometric quantitie , in an agitator or blender , to yield urea nitrate , and uniformly mixing up to 15 parts by ut . the said of urea nitrate with up to 95 parts by wt.of dried phosphogypsum , obtained as industriel Winterbr Comp.Specn: 08 Pages; Drgs 0 Sheets .

7652

[PART III-SBC. 2 THE GAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

Ind.Cl.:12 D

194256 Int.Cl ' : C21C 7/10

" A PROCESS AND AN APPARATUS FOR THE DECARBURIZATION OF STEEL MELTS "

Applicant: MANNESMANN AKTIENGESELLSCHAFT

A GERMAN COMPANY

MANNESMANNUFER 2 , D- 40213 DUSSELDORF GERMANY

Inventors:

4. Dr. FRANK HAERS

1.Dr. HORST DIETER SCHOLER

2. Dr. VOLKER WIEGMANN 5. Dr. LEO PEETERS

3. RAINER DITTRICH

Application No2020 /MAS/ 1996 filed on 13/11/1996

Convention No.19544166.4 filed on 17/11/1995 in GERMANY

Appropriate office for Opposition Proceedings (Rule 4, Patents Rules , 2003), Patent Office, Chennai Branch .

10 Claims

Aprocess for decarburizing steel melt in a closed metallurgical vessel that is connected to a vacuum unit, comprising the steps of filling the closed metallurgical vessel with a steel melt containing carbon; adjusting the preamare in the closed metallurgical vessel to below 100 mbar, introducing replenishment supply of oxygen to the closed metallurgical vessel to implement decarburization ofthe steel melt to remove the carbon; introducing a metallic combustible, substance at an even introduction rate to the closed metallurgical vessel after said step of introducing a replenishment supply of oxygen, and introducing amount of oxygen during said step of introducing a metallic combustible substance needed to combust the metallic combustible substance during the decarburization ofthe steel melt, wherein said steps of introducing a metallic combustible substance and introducing an additional amount of oxygen are performed during the first 10 minutes following completion ofsaid step ofadjusting the pressure.

Comp.Specn . 18 Pages ; Drgs 3 Sheets .

7653 THE GAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

PART III-SEC . 2]

Ind. Cl. :761,

194257

Int.Cl:A 44 B 19/30

" A LOCK SLIDER FOR A SLIDE FASTENER "

YKK CORPORATION ,

Applicant:

A JAPANESE COMPANY, OF No. 1 , KANDA IZUMI - CHO, CHIYODA - KU , TOKYO , JAPAN

1. MASAO WAKABAYASHI

Inventors:

Application No1318 / MAS/ 1996 filed on 25th July 1996

Convention No.7 - 194531 on, 31st July 1995 in JAPAN

Appropriate office for Opposition Proceedings (Rule 4, Patents Rules, 2003 ) Patent Office, Chennai Branch .

07 Claims

1. A lock slider for a slide fastener ,

comprising:

a slider body ( 1 ) composed of upper and lower wings ( 3,4 ) joined at their front ends by a guide post ( 5 ) , said upper wing ( 3 ) having on its lower surface a pair of downwardly projecting side flanges (6) and on its upper surface a pair of upwardly projecting lugs ( 11 ) disposed with a width of a pull tab ( 2 ) , each of the lugs ( 11 ) having a horizontal slot ( 13 ) and a pivot insertion hole ( 14 ) communicating with said horizontal slot ( 13 ) , said upper wing ( 3 ) also having at least one locking - pawl insertion hole ( 15 ) communicating with the respective horizontal slots ( 13 ) ;

7654

THE GAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

[PART III-SEC. 2 said pull tab ( 2 ) having at its base a pair of lateral pivots ( 22 ) to be inserted in the respective pivot insertion holes ( 14 ) , said pull tab ( 2 ) also having on one surface at least one locking pawl ( 23 ) insertable through said locking - pawl insertion hole ( 15) when said pull tab is pivotally moved about said base to lie flat on the upper surface of said upper wing; and

said slider body ( 1 ) and said pull tab ( 2 ) being simultaneously molded in an assembled form .

Comp.Specn . 22 Pages ; Drgs 07 Sheets .

7655 THE GAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

PART III-SEC. 2]

194258

Ind. Cl ..:83B

Int. Cl . :A 01.F 25/14; B 65 D 045

" STORAGE POT "

T. STANES & COMPANY LIMITED

Applicant:

an Indian Company having its principal place of business at 8/23-24 , Race Course Road, Coimbatore -641 018, Tamil Nadu, India

DR . SANTHANAM RAMARETHINAM

Inventors:

1290/MAS/ 1996 filed on 22nd July 1996

Application No:

200 Appropriate office for Opposition Proceedings (Rule 4, Patents Rules, 2003 ) Patent Office, Chennai Branch .

1. Claims

1. ACeramic Storage pot for storing bio- fertilizers under controlled temperature without any external means , comprising ofan outer pot and an inner pot positioned within the outer pot with space in between filled with water,.

wherein the said outer pot of ceramic is an inverted cone with a flat basé, having inward flanges at thetop surface;

wherein the said inner pot also of ceramic also having an identical conical shape as the said outer pot having an inward flange, resting on the inward flange of the said outer pot;

wherein the said inner pot and outer pot are rigidly fixed together with locating lugs with annular space in between;

wherein the said outer pot further has a ceramic topcover which further has vent holes and central cavity fittedwith. adetachablelid.

Reference to: 1289/MAS/96

8 Pages; Drgs 1 Sheets .

Comp. Specn.

7656

[PART III-SBC. 2 THE GAZETTE OF INDIA , OCTOBER 2, 2004 ( ASVINA 10, 1926)

Ind. Cl. :140A

194259

Int.Cl7 : C10M155/02

" A REFRIGERATOR OIL "

IDEMITSU KOSAN CO . , LTD . ,

Applicant:

A JAPANESE COMPANY

1-1 , MARUNOUCHI 3 - CHOME , CHIYODA - KU , TOKYO JAPAN

1. TADASHI KATAFUCHI

Inventors:

Application No1180 /MAS/ 1996 filed on 04/07/1996

Convention No. 173522/1995

on, 10/07/1995 in JAPAN

Appropriate office for Opposition Proceedings (Rule 4, Patents Rules , 2003) , Patent Office, Chennai Branch .

4 Claims

1. A refrigerator oil comprising a base oil consisting of an oxygen containing organic compound and a fluorinated silicone oil having a kinematic viscosity of 500 mm²/ sec or more at 25°C, wherein the oxygen containing organic compound is polyalkylene glycol, a polyester, a polyol ester, a polyether ketone, a polyvinyl ether, or a carbonate derivative and wherein the content of the fluorinated silicone oil in the refrigerator oil is 1 to6,000 ppmbyweight.

Comp.Specn. 49 Pages ; Drgs NIL Sheets .

7657 PARPANT II Sec . 2 ]

ABLAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

d. 61:40 B & 32B

194260 Art Int.Cl'ec.072097/00

A"PR PROCESS FOR THE PREPARATION OF A CATALYST AND A PRPROCESS ROR THE PREPARATION OF HYDROCARBONS

SHSHELL INTERNATIONALE RESEARCH MAATSCHAPPIJ B.V. , ApApplicant :

A LA DUTCH COMPANY,

CAGARBLAVAN BYLANDTLAAN 30 ,

252596HR THE HAGUE,

THE NETHERLANDS

: BACAGOBUS JOHANNES CORNELIS GEERLINGS

In Inventors

2. 21/MARINUS FRANCISCUS GOES

3. AHANGMICHIEL HUISMAN

4. HEHEIKO OOSTERBEEK

5. BAPAUSUSUONANNES MARIA REK

6.GADAVID SCHADDENHORST

7. ΑΒΑΝΑPAUL LANGE

Application No : 1014/MAS/ 1996 filed on 10th June 1996

Appropriate office for Opposition Proceedings (Rule 4, Patents Rules, 2003 ) , Patent Office, Chennai Branch.

10.Claims

1.1 . A Aroprocess for the preparation of a catalyst said process cooomprising the steps of impregnating a carrier with a solution of a cobalt salsalt and solsolution of a manganese and /or vanadium salt; drying at a tentemperature of 50 16 300 °C for up to 24 hours and optionally calcining at a temperature of 200 to 900°C for 0.5 to 24 hours, to obtain a catalyst having 14100 parts by iweight of cobalt per 100 parts by weight of the catalyst .

References Cited: B.P. No. 71,770 , WO 93/05000 U.S. 4,588,708 .

CComp.Specn . 16 Pages: Drgs 0. Sheets.

7658

[PART III-SEC. 2 THE GAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10 , 1926)

OPPOSITION PROCEEDINGS (U/ S . 25)

An opposition entered by M/ s . Bajaj Auto Limited, Pune to the grant ofa Patent to the applicationNo. 190613 ( 1375 /Del/94) of M/s . Honda Giken Kogyo Kabushiki Kaisha, Japan has not been proceeded with and stands withdrawn.

Anopposition entered byM/ s . Hindustan Lever Limited, Mumbai to the grant of a Patent to the application No. 190616 ( 1635/Del/94) of M/s . The Procter & Gamble Co. , U.S.A. has not been proceeded with and stands withdrawn.

An opposition entered by M/s . Bajaj Auto Limited, Pune to the grant ofa Patent to the application No. 190355 ( 1609/Del/94) of M/s . HondaGiken Kogyo Kabushiki Kaisha, Japan has not been proceeded with and stands withdrawn .

Anopposition entered byM/s . Hindustan Lever Limited, Mumbai to the grant ofa Patent to the application No. 190603 ( 1134/Del/94) of M/s . The Procter & Gamble Co. , U.S.A. has not been proceeded with and stands withdrawn.

CANCELLATION PROCEEDINGS UNDER SECTION 19 ( 1 )

"An application in the name ofYASH PLASTOMET PVT. LTD . for Cancellation ofRegistered DesignNo. 191653 was filed on 23.1.04 in class 09-07 in the name of MOLD - TEK TECHNOLOGIES LTD . "

THE DESIGNS ACT, 2000

SECTION 30 DESIGN ASSIGNMENT

The following Design stand in the name ofKrishna Pal Singh registered under the Designs Act, 1911 has been Changed in theRegister ofDesign in the name of Surendra Singh .

Class

Name

DesignNo.

192731

28-03

Surendra Singh, proprietor ofM/ s. SinghMehendi Industries at RGM No. 1 , G.P. Α/1-7, Lichubagan, Jyangra, Kolkata- 700059, India.

PATENTS SEALED ON 03-09-2004/KOLKATA

192208 192212 192214 192217 192221 192222 192223 192273 192289

KOLKATA - 9

PATENTS SEALED ON 26-08-2004/DELHI

190157 191246 191218 191363 191411 191424 191429 191430 191453 191454 191459 191508 191574 191640 191652 191657 191659 191665 191666 191668 191671 191677 191679 191691 191692 191696 191697 191698 191699 191701 7659 PART III-SEC . 2]

THE GAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

REGISTRATION OF DESIGNS

The following designs have been registered. They are open for public inspection from the date of registration . (Colour combination if any, is not shown In the representation)

The dates shown in the following each entry is the date of registration.

Clase 14-41 No. 191241 . MATSUSHITA ELECTRIC INDUSTRIAL CO. LTD. , OF 1006, OAZA KADOMA, KADOMA-SHI , OSAKA 571-8501, JAPAN. "DIGITAL AUDIO DISC PLAYER " 06.08.2002 (RECIPROCITY, JAPAN)

Class 12-16 No.192976, CITY CYCLE INDUSTRIES, OF 117-119, DAM STREET, COLOMBO 12 (SRI LANKA), " HUB OF VEHICLES WHEELS" 25.08.2003

Class 12-16 No. 192975. CITY CYCLE INDUSTRIES, OF 117-119, DAM STREET, COLOMBO 12 (SRI LANKA) , "HUB OF VEHICLES WHEELS" 18.06.2003

13-03

Class

No.193226. FEDERAL ELEKTRIK YATIRIM VE TICARET ANONIUM BIRKETI,, OF 1 , ORGANIZE SANAYI BOLGEST HANLI BELDESI SAKARYA/TURKEY. " SWITCHES " 15.09.2003 7660

APART IHSBC. 2 THE GAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

09-01

Class

No. 194307. ALPHA PACKAGING LTD , AT 1, JASH MARKET, SURAT 305002, GUJARAT, INDIA. "BOTTLE" 16.01.2004

Class 09-03 No. 194316. KORES (INDIA) LIMITED, KORES HOUSE , POST BOX NO . 6558, OFF DR. E. MOSES ROAD, M: WORLE, MAHARASHTRA , INDIA. MUMBAD -400018, " CONTAINER" 16.01.2003.

Class 19-06 No.193070. HINDUSTAN PENCILS LTD. , 510, HIMALAYA HOUSE ? " 79A PALTON ROAD, MUMBAI -400 001 , MAHARASHTRA, INDIA. " PENCIL 01.09.2003

Class 19-06 No.193071 . HINDUSTAN. PENCILS LTD . , 510, HIMALAYA HOUSE , 79, PALTON ROAD, MUMBAIF -400001 , MAHARASHTRA , INDIA. "PENCIL" 01.09.2003

Class 19-06 No.195250. CAMLINE, A COMPANY INCORPORATED IN INDIA OF CAMLEN HOUS J. B. NAGAR, ANDHERI) ( E ), MUMBA MAHARASHTRA , IN INDIA. INSTRUMENT" 20.04.2004 #WRITING PART III-Sac. 2]

THE GAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

Cines 14-02 No.383097. BOLE- IN- THE- WALL EDUCATION LIMITED, 2 FLOOR, SYNERGY MELDING, BT CAMPUS, HAUZ KHAS , NEW DELHI -110016 "MOUSE" 01.09.2003

Class 19-66 No.193073. HINDUSTAN PENCILS LTD. , 510, HIMALAYA HOUSE 7 PALTON BOAD, MUMBAR 400 001 , MAHARASHTRA, INDIA "PENCIL # LO0.2003 。

19-06

Claas

No.193072. HINDUSTAN PENCILS LTD., 510, HIMALAYA HOUSE, 7%, PALTON ROAD, MUMBAL 400 001 , MAHARASHTRA, INDIA: "PENCIL SL.09.2003

Class 06-03 No.193499 . ANUJ INDUSTRIES , 8333, SHINGLOO BUILDING, ROMANARA ROAD, DELHI - 110087, "CUTTER" 16.14.2003

Class 05-06 No. 193688. THE RISHABH VELVELEEN LIMITED , AT 9 KM, HARDWAR DELFT BOAD , HEAL RANIPUR TOLL BARRIER, SWALAPIR, HARDWARI 249 407, U.P., INDIA " TEXTLE FABRICH 03.11.2003

1926701/2004 7662

THE GAZETTE OF INDIA, OCTOBER 2 , 2004 ( ASVINA 10, 1926)

[PART III-SBC. 2 21-99

Class

No.193498. S. KUMAR & COMPANY, A1/155, PASCHIM VIHAR, NEW DELHI - 110063 . "ΤΟΥ" 16.10.2003

Class 28-03 No.193952. T.V. TECHNOPLAST, AN INDIAN PARTNERSHIP FIRM , OF 28- C, GOVERNMENT INDUSTRIAL ESTATE, CHARKOP KANDIVALI (W), MUMBAI -400067 , MAHARASHTRA, INDIA, "COMB" 04.12.2003

Class 13-03 No.193236. FEDERAL ELEKTRIK YATIRIM VE TICARET ANONIUM SIRKETI , OF 1 , ORGANIZE SANAYI BOLGESI HANLI BELDESI- SAKARYA/TURKEY. "AUTOMATIC FUSE " 15.09.2003

Class 07-05 No.194271 . RECKITT BENCKISER INC. , A DELAWARE CORPORATION , OF 1655 VALLEY ROAD, WAYNE, NEW JERSEY 07474, U.S.A. " SPONGE" 22.07.2003 ( RECIPROCITY, U.K.)

Class 13-03 No.193237 . FEDERAL ELEKTRIK YATIRIM VE TICARET ANONIUM SIRKETI, OF 1 , ORGANIZE SANAYI BOLGESI + HANLI BELDESI- SAKARYA/TURKEY. "AUTOMATIC FUSE " 15.09.2003 7663 THE GAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

PART III SEC. 2]

Class 09-05 193148. HITAISHI CREATIVE ENTERPRISES PVT. LTD. OF 1, B.K. PAUL AVENUE, KOLKATA 700005, WEST BENGAL, INDIA. "BAG" 09.09.2003

Class 13-03 No.193399. LARSEN & TOUBRO LIMITED , ECC DIVISION, MOUNT POONAMALLEE ROAD, ΜΑΝΑΡΑΚKAM, P.R.NO.979, CHENNAI: 600 089, TAMIL NADU , INDIA, INDIAN NATIONAL. SUBMERSIBLE PUMP " 07.10.2003 .

Class 09-07 No.193188. SUBH GAUTAM, OF W-54/H, SECTOR 11, NOIDA-201301 , U.P. INDIA. "CLOSURE CAP FOR CONTAINERS " 10.09.2003

13-03

Class

No. 194341. MEHER CAPACITORS PVT. LTD. OF 52/1, BASAPPA ROAD, SHANTHINAGAR, BANGALORE- 660027 , KARNATAKA, INDIA, AN INDIAN COMPANY. CAPACITORS" 23.01.2004 "ELECTRICAL

11-01

Class

No.192517. TARA JEWELS EXPORT LIMITED, OF G -44, GEMS JEWELLERY COMPLEX NO. 1, SEEPZ, ANDHERI (EAST), MUMBAI -400096, MAHARASHTRA, INDIA. " RING " 04.07.2003 7664

[PART III-Sac. 2 THE GAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

Class 10-04 No.194250. ISKRAEMECO MERJENJE , IN UPRAVLJANJE ENERGIJE D.D. OF SAVSKA LOKA 4, SI-4000 KRANJ, SLOVENIA, A COMPANY INCORPORATED IN SLOVENIA. " ELECTRICITY 16.07.2003 METER" (RECIPROCITY, INTERNATIONAL WIPO)

Class 11-01 No.192518. TARA JEWELS EXPORT LIMITED G-44, GEMS JEWELLERY COMPLEX NO. T SEEPZ, ANDHERI (EAST) , MUMBAI -40009% MAHARASHTRA, INDIA "RING (FINGER) 04.07.2003

Class 15-99 No.192957 . SAINT-GOBIN CALMAR INC. 353 SOUTH TURNBULL CANYON ROAD, CITY OF INDUSTRY CA 91745-1203, U.S.A. " DISPENSING PUMP HEAD" 21.02.2003 (RECIPROCITY, U.S.A. )

Class 27-06 No.193198. KUBER KHẢINI PVT. LTD. A COMPANY INCORPORATED UNDER THE LAWS OF INDIA OF THE ADDRE32- G.T. KARNAL ROAD, DELHI- 11002, INDIA "POUCH" 12.09.2003

Class 12-11 No.194369. M/S. JOGINDER SINGH TEJVINDER SINGH OPP : DHANDARI RAILWAY STATION, DHANDARI KALAN , LUDHIANA, (PUNJAB) (INDIA). " CARRIER FOR BICYCLES" 27.01.2004 PART III-SEC. 2]

THEGAZETTEOF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

12-11

Class

No.194058. G.G. CYCLE INDUSTRIES OF CAMPA COLA ROAD, OPPOSITE POLICE CHOWKE, GAT. ROAD, DHANDARI KALAN, LUDHIANA -141016, (PUNJAB), INDIA, " BI -CYCLE CARRIER" 18.12.2003

13-63

Class

No.193256. FEDERAL ELEKTRIK YATIRIM VW TICARET AMONIUM SIRKETI, OF 1, ORGANIZE NAYI BOLGESI HANLI BELDEM KARYA/TURKEY. " SWITCH" 15.09.2003

09-01

Class

No.193156. TRUE PACK PVT. LTD. , AT NO.485, 13TH CROSS, IVTH PHASE, PEENYA INDUSTRIAL AREA, BANGALORE : -560 058, KARNATAKA, INDIA, INDIAN- NATIONAL. "CAP" 09.09.2003

Class 10-60 No193157. TRUE PACK PVT. LTD. , AT NO.465 CROSS, IVTH PHASE, PRENYA INDUSTRIAL CA, BANGALORE -500 056, KARNATAKA, MA, INDIAN -NATIONAL, "CAP 09.09.2003

12-11 No.190006. NEW LIGHT CYCLE INDUSTRI GOBINDPURA MARKET, GILL ROAD, MILLER GANJ, LUBKANAM -441 8 , (PUNJAB ), INDIA, "BI -CYCLE PEDAL" 24.12.2003.

= 7666

THE GAZETTE OF INDIA , OCTOBER 2, 2004 (ASVINA 10, 1926)

[PART III-SEC. 2 25-01

Class

No.192986 . DAN -PAL OF KIBBUTZ DAN, D.N. UPPER GALILEE 12245, ISRAEL. " STRUCTURAL PANELS" 06.03.2003 (RECIPROCITY, ISRAEL)

Class 15-99 No.193022 . M/S . JAGDEO ELECTRIC WORKS, KWALITY CHOWK, SHIMLAPURE, LUDHIANA, (PB. ), (INDIA), " END COVER FOR RAUTER MACHINE" 27.06.2003

24-01

Class

No.193604. BIOSYNC SCIENTIFIC, AN INDIAN PARTNERSHIP FIRM HAVING ITS OFFICE AT 607-8, JOLLY PLAZA, ATHWAGATE CIRCLE, NANPURA, SURAT-395001 , STATE OF GUJRAT, INDIA, OF ABOVE ADDRESS .

" TORQUER FOR DOCTORS AND HOSPITALS" 29.10.2003 .

Class 07-04

TIME No.193605. APPLIANCES PRIVATE LIMITED , AT A- 27, KIRAN INDUSTRIAL ESTATE, M.G. ROAD , GOREGAON (W), MUMBAI -400862, STATE OF MAHARASHTRA, INDIA, " MIXER GRINDER " 29.10.2003

Class 24-01 No.193603. BIOSYNC SCIENTIFIC, AN INDIAN PARTNERSHIP FIRM HAVING ITS OFFICE AT 607-8 , JOLLY PLAZA, ATHWAGATE CIRCLE, NANPURA , SURAT- 395001 , STATE OF GUJRAT, INDIA, " HAEMOSTASIS Y -ADAPTOR FOR SOCTORS AND HOSPITALS" 29.10.2003 .

7667 PART III-SBC. 2]

THE GAZETTE OF INDIA, OCTOBER 2, 2004 (ASVINA 10, 1926)

Class 13-03 No.193228. FEDERAL ELEKTRIK YATIRIM VE TICARET ANONTUM SİRKETI , OF 1 , ORGANIZE SANAYI BOLGESI HANLI BELDESI- SAKARYA/TURKEY. " SWITCHES" 15.09.2003

Class 14-01 No.191240. MATSUSHITA ELECTRIC INDUSTRIAL CO. LTD. , OF 1006, OAZA KADOMA, KADOMA - SHI , OSAKA 571-8501, JAPAN. " DIGITAL AUDIO DISC PLAYER " 06.08.2002 (RECIPROCITY, JAPAN)

S. CHANDRASEKARAN

Controller General of Patents , Designs & Trade Marks

प्रवन्धक, भारत सरकार मुद्रणालय , फरीदाबाद द्वारा मुद्रित एवं प्रकाशन नियंत्रक , दिल्ली, द्वारा प्रकाशित , 2004, PUNTED BY THE MANAGER, GOVERNMENT OF INDIA PREM, FARIDABAD AND PUBLISHED BY THE CONTROLLER OF PUBLICATIONS , DELHI , 2004